AI Assistant Picture

AI Assistant Picture — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Artificial intelligence arms race

A military artificial intelligence arms race is a technological, economic, and military competition between two or more states to develop and deploy advanced AI technologies and lethal autonomous weapons systems (LAWS). The goal is to gain a strategic or tactical advantage over rivals, similar to previous arms races involving nuclear or conventional military technologies. Since the mid-2010s, many analysts have noted the emergence of such an arms race between superpowers for better AI technology and military AI, driven by increasing geopolitical and military tensions. An AI arms race is sometimes placed in the context of an AI Cold War between the United States and China. Several influential figures and publications have emphasized that whoever develops artificial general intelligence (AGI) first could dominate global affairs in the 21st century. Russian President Vladimir Putin stated that the leader in AI will "rule the world." Researchers and experts, such as Leopold Aschenbrenner and Adrian Pecotic respectively, warn that the AGI race between major powers like the U.S. and China could reshape geopolitical power. This includes AI for surveillance, autonomous weapons, decision-making systems, cyber operations, and more. == Terminology == Lethal autonomous weapons systems use artificial intelligence to identify and kill human targets without human intervention. LAWS have colloquially been called "slaughterbots" or "killer robots". Broadly, any competition for superior AI is sometimes framed as an "arms race". Advantages in military AI overlap with advantages in other sectors, as countries pursue both economic and military advantages, as per previous arms races throughout history. == History == In 2014, AI specialist Steve Omohundro warned that "An autonomous weapons arms race is already taking place". According to Siemens, worldwide military spending on robotics was US$5.1 billion in 2010 and US$7.5 billion in 2015. China became a top player in artificial intelligence research in the 2010s. According to the Financial Times, in 2016, for the first time, China published more AI research papers than the entire European Union. When restricted to number of AI papers in the top 5% of cited papers, China overtook the United States in 2016 but lagged behind the European Union. 23% of the researchers presenting at the 2017 American Association for the Advancement of Artificial Intelligence (AAAI) conference were Chinese. Eric Schmidt, the former chairman and chief executive officer of Alphabet, has predicted China will be the leading country in AI by 2025. == Risks == One risk concerns the AI race itself, whether or not the race is won by any one group. There are strong incentives for development teams to cut corners with regard to the safety of the system, increasing the risk of critical failures and unintended consequences. This is in part due to the perceived advantage of being the first to develop advanced AI technology. One team appearing to be on the brink of a breakthrough can encourage other teams to take shortcuts, ignore precautions and deploy a system that is less ready. Some argue that using "race" terminology at all in this context can exacerbate this effect. Another potential danger of an AI arms race is the possibility of losing control of the AI systems; the risk is compounded in the case of a race to artificial general intelligence, which may present an existential risk. In 2023, a United States Air Force official reportedly said that during a computer test, a simulated AI drone killed the human character operating it. The USAF later said the official had misspoken and that it never conducted such simulations. A third risk of an AI arms race is whether or not the race is actually won by one group. The concern is regarding the consolidation of power and technological advantage in the hands of one group. A US government report argued that "AI-enabled capabilities could be used to threaten critical infrastructure, amplify disinformation campaigns, and wage war":1, and that "global stability and nuclear deterrence could be undermined".:11 == By nation == === United States === In 2014, former Secretary of Defense Chuck Hagel posited the "Third Offset Strategy" that rapid advances in artificial intelligence will define the next generation of warfare. According to data science and analytics firm Govini, the U.S. Department of Defense (DoD) increased investment in artificial intelligence, big data and cloud computing from $5.6 billion in 2011 to $7.4 billion in 2016. However, the civilian NSF budget for AI saw no increase in 2017. Japan Times reported in 2018 that the United States private investment is around $70 billion per year. The November 2019 'Interim Report' of the United States' National Security Commission on Artificial Intelligence confirmed that AI is critical to US technological military superiority. The U.S. has many military AI combat programs, such as the Sea Hunter autonomous warship, which is designed to operate for extended periods at sea without a single crew member, and to even guide itself in and out of port. From 2017, a temporary US Department of Defense directive requires a human operator to be kept in the loop when it comes to the taking of human life by autonomous weapons systems. On October 31, 2019, the United States Department of Defense's Defense Innovation Board published the draft of a report recommending principles for the ethical use of artificial intelligence by the Department of Defense that would ensure a human operator would always be able to look into the 'black box' and understand the kill-chain process. However, a major concern is how the report will be implemented. The Joint Artificial Intelligence Center (JAIC) (pronounced "jake") is an American organization on exploring the usage of AI (particularly edge computing), Network of Networks, and AI-enhanced communication, for use in actual combat. It is a subdivision of the United States Armed Forces and was created in June 2018. The organization's stated objective is to "transform the US Department of Defense by accelerating the delivery and adoption of AI to achieve mission impact at scale. The goal is to use AI to solve large and complex problem sets that span multiple combat systems; then, ensure the combat Systems and Components have real-time access to ever-improving libraries of data sets and tools." In 2023, Microsoft pitched the DoD to use DALL-E models to train its battlefield management system. OpenAI, the developer of DALL-E, removed the blanket ban on military and warfare use from its usage policies in January 2024. The Biden administration imposed restrictions on the export of advanced NVIDIA chips and GPUs to China in an effort to limit China's progress in artificial intelligence and high-performance computing. The policy aimed to prevent the use of cutting-edge U.S. technology in military or surveillance applications and to maintain a strategic advantage in the global AI race. In 2025, under the second Trump administration, the United States began a broad deregulation campaign aimed at accelerating growth in sectors critical to artificial intelligence, including nuclear energy, infrastructure, and high-performance computing. The goal was to remove regulatory barriers and attract private investment to boost domestic AI capabilities. This included easing restrictions on data usage, speeding up approvals for AI-related infrastructure projects, and incentivizing innovation in cloud computing and semiconductors. Companies like NVIDIA, Oracle, and Cisco played a central role in these efforts, expanding their AI research, data center capacity, and partnerships to help position the U.S. as a global leader in AI development. ==== Project Maven ==== Project Maven is a Pentagon project involving using machine learning and engineering talent to distinguish people and objects in drone videos, apparently giving the government real-time battlefield command and control, and the ability to track, tag and spy on targets without human involvement. Initially the effort was led by Robert O. Work who was concerned about China's military use of the emerging technology. Reportedly, Pentagon development stops short of acting as an AI weapons system capable of firing on self-designated targets. The project was established in a memo by the U.S. Deputy Secretary of Defense on 26 April 2017. Also known as the Algorithmic Warfare Cross Functional Team, it is, according to Lt. Gen. of the United States Air Force Jack Shanahan in November 2017, a project "designed to be that pilot project, that pathfinder, that spark that kindles the flame front of artificial intelligence across the rest of the [Defense] Department". Its chief, U.S. Marine Corps Col. Drew Cukor, said: "People and computers will work symbiotically to increase the ability of weapon systems to detect objects." Project Maven has been noted by allies, such as Australia's Ian Langford, for the
Read more →
Teleradiology

Teleradiology is the transmission of radiological patient images from procedures such as x-rays, Computed tomography (CT), and MRI imaging, from one location to another for the purposes of sharing studies with other radiologists and physicians. Teleradiology allows radiologists to provide services without actually having to be at the location of the patient. This is particularly important when a sub-specialist such as an MRI radiologist, neuroradiologist, pediatric radiologist, or musculoskeletal radiologist is needed, since these professionals are generally only located in large metropolitan areas working during daytime hours. Teleradiology allows for specialists to be available at all times. Teleradiology utilizes standard network technologies such as the Internet, telephone lines, wide area networks, local area networks (LAN) and the latest advanced technologies such as medical cloud computing. Specialized software is used to transmit the images and enable the radiologist to effectively analyze potentially hundreds of images of a given study. Technologies such as advanced graphics processing, voice recognition, artificial intelligence, and image compression are often used in teleradiology. Through teleradiology and mobile DICOM viewers, images can be sent to another part of the hospital or to other locations around the world with equal effort. Teleradiology is a growth technology given that imaging procedures are growing approximately 15% annually against an increase of only 2% in the radiologist population. == Reports == Teleradiology services commonly provide either preliminary or final interpretations of medical imaging studies. Preliminary reads are frequently used in emergency settings to support immediate clinical decisions and may include direct communication of critical findings to the referring physician. Some providers report turnaround times of approximately 30 minutes for emergency cases, with faster processing for time-sensitive conditions such as stroke. Final reads are definitive and used in official patient records and billing. These reports typically include all relevant findings and may require access to prior imaging and clinical data. Teleradiology is also employed to provide off-hour or overflow coverage for healthcare institutions lacking continuous on-site radiology staffing. == Subspecialties == Some teleradiologists are fellowship trained and have a wide variety of subspecialty expertise including such difficult-to-find areas as neuroradiology, pediatric neuroradiology, thoracic imaging, musculoskeletal radiology, mammography, and nuclear cardiology. There are also various medical practitioners who are not radiologists that take on studies in radiology to become sub specialists in their respected fields, an example of this is dentistry where oral and maxillofacial radiology allows those in dentistry to specialize in the acquisition and interpretation of radiographic imaging studies performed for diagnosis of treatment guidance for conditions affecting the maxillofacial region. == Teleultrasound == Teleradiology infrastructure has also been adapted to support point-of-care ultrasound (POCUS) in remote and austere environments. In teleultrasound—also known as telementored ultrasound—a remote expert guides a non-specialist in real time during image acquisition. This technique has been successfully demonstrated in extreme settings, including aboard the International Space Station, on Mount Everest, and during helicopter flight. == Regulations == In the United States, Medicare and Medicaid laws require the teleradiologist to be on U.S. soil in order to qualify for reimbursement of the Final Read. In addition, advanced teleradiology systems must also be HIPAA compliant, which helps to ensure patients' privacy. HIPAA (Health Insurance Portability and Accountability Act of 1996) is a uniform, federal floor of privacy protections for consumers. It limits the ways that entities can use patients' personal information and protects the privacy of all medical information no matter what form it is in. Quality teleradiology must abide by important HIPAA rules to ensure patients' privacy is protected. Also State laws governing the licensing requirements and medical malpractice insurance coverage required for physicians vary from state to state. Ensuring compliance with these laws is a significant overhead expense for larger multi-state teleradiology groups. Medicare (Australia) has identical requirements to that of the United States, where the guidelines are provided by the Department of Health and Ageing, and government based payments fall under the Health Insurance Act. The regulations in Australia are also conducted at both federal and state levels, ensuring that strict guidelines are adhered to at all times, with regular yearly updates and amendments are introduced (usually around March and November of every year), ensuring that the legislation is kept up to date with changes in the industry. One of the most recent changes to Medicare and radiology / teleradiology in Australia was the introduction of the Diagnostic Imaging Accreditation Scheme (DIAS) on 1 July 2008. DIAS was introduced to further improve the quality of Diagnostic Imaging and to amend the Health Insurance Act. == Industry growth == Until the late 1990s teleradiology was primarily used by individual radiologists to interpret occasional emergency studies from offsite locations, often in the radiologists home. The connections were made through standard analog phone lines. Teleradiology expanded rapidly as the growth of the internet and broad band combined with new CT scanner technology to become an essential tool in trauma cases in emergency rooms throughout the country. The occasional 2–3 x-ray studies a week soon became 3–10 CT scans, or more, a night. Because ER physicians are not trained to read CT scans or MRIs, radiologists went from working 8–10 hours a day, five and half days a week to a schedule of 24 hours a day, 7 days a week coverage. This became a particularly acute challenge in smaller rural facilities that only had one solo radiologist with no other to share call. These circumstances spawned a post-dot.com boom of firms and groups that provided medical outsourcing, off-site teleradiology on-call services to hospitals and Radiology Groups around the country. As an example, a teleradiology firm might cover trauma at a hospital in Indiana with doctors based in Texas. Some firms even used overseas doctors in locations like Australia and India. Nighthawk, founded by Paul Berger, was the first to station U.S. licensed radiologists overseas (initially Australia and later Switzerland) to maximize the time zone difference to provide nightcall in U.S. hospitals. Currently, teleradiology firms are facing pricing pressures. Industry consolidation is likely as there are more than 500 of these firms, large and small, throughout the United States.
Read more →
Comparison of raster graphics editors

Raster graphics editors can be compared by many variables, including availability. == List == == General information == Basic general information about the editor: creator, company, license, etc. == Operating system support == The operating systems on which the editors can run natively, that is, without emulation, virtual machines or compatibility layers. In other words, the software must be specifically coded for the operation system; for example, Adobe Photoshop for Windows running on Linux with Wine does not fit. == Features == == Color spaces == == File support ==
Read more →
AppyStore

AppyStore is a comprehensive learning videos and games app for kids up to the age of 8 years. The platform developed by Mauj Mobile, a mobile value-added services (VAS) provider curates content to help in child development by leveraging technology. Mauj is funded by Sequoia Capital, Westbridge Capital and Intel Capital. == Background == AppyStore was launched in 2014 as a platform providing content for kids between the ages of 1.5 and 6 years. AppyStore subsequently extended its services for kids up to 8 years of age. The company operates on a subscription-based model and claims to have 5,000 learning games and videos segregated in 18 learning areas developed to help children gain optimal skills and qualities. According to an article published in Business Standard, the application is claimed to be one of the top 5 apps that help to enhance the logical and imaginative capabilities of children. AppyStore was awarded the Best app for kids by Google Play in December 2017. == Service == The company provides content via a website and an Android app. The website and android app provide learning games, rhymes, phonics, reading, stories, science, numbers, maths, logic videos comprising puzzles, worksheets, videos and fun activities and the premium subscription also includes physical worksheets which are home delivered. This content is educational and has been handpicked by teachers and experts with an understanding of the major areas of child development milestones for children up to 8 years of age. The mobile application also allows parents to track the progress of their child on the basis of the number of videos viewed.
Read more →
Integrated writing environment

An integrated writing environment (IWE) is software that provides comprehensive writing and knowledge management functionality for writers and information workers. IWEs enable writers and information workers to perform a variety of tasks related to the document in the IWE in a single environment. This provides a distraction-free workspace and streamlined writing experience. IWEs provide similar efficiency and functionality benefits to writers and information professionals that integrated development environments (IDEs) provide to software developers. == Overview == IWEs are designed to maximize productivity and help improve the quality of written work by integrating together tools that allow users to work effectively in a single application. The IWE features may include integrated content search, reversion management, outlining, note management, and reference management, as may be suitable for the target field of use. == List of IWEs == Celtx This IWE is intended for screenplay writers and has screenplay writing and management tools. Celtex provides tools for the pre-production work phase, story development, storyboarding, script breakdowns, production scheduling, and reports. Scrivener This IWE targets novel, research paper, and script writing. Scrivener provides tools to organize notes and research documents for easy access and referencing. After completing the writing, Scrivener allows the user to export the document to formats supported by common word processors, such as Microsoft Word. TeXstudio This IWE targets LaTeX documents and provides interactive spelling checker, code folding, and syntax highlighting.
Read more →
Dyme (company)

Dyme is a Dutch fintech start-up and subscription management app that allows users to cancel and renegotiate their recurring costs. In 2019, Dyme was the first independent Dutch company to receive a PSD2 licence from the Netherlands' central bank (DNB). == History == Dyme was founded in 2018 by Joran Iedema, David Knap, David Schogt and Wouter Florijn. The four had previously founded Cycleswap, a bicycle rental platform launched in 2015 and sold to the American platform Spinlister in 2016. The company gained notability in the Netherlands in 2020 when it appeared on Dutch television in Dragons Den, where Pieter Schoen made a €750,000 bid in an attempt to acquire 51.01% of the company. Dyme's Joran Iedema rejected the deal. == Recognition == Wired described Dyme as one of the "hottest start-ups in Europe" in 2021. As of 2021, the company reportedly had 350,000 registered users in the Netherlands and Great Britain.
Read more →
Distribution management system

A distribution management system (DMS) is a collection of applications designed to monitor and control the electric power distribution networks efficiently and reliably. It acts as a decision support system to assist the control room and field operating personnel with the monitoring and control of the electric distribution system. Improving the reliability and quality of service in terms of reducing power outages, minimizing outage time, maintaining acceptable frequency and voltage levels are the key deliverables of a DMS. Given the complexity of distribution grids, such systems may involve communication and coordination across multiple components. For example, the control of active loads may require a complex chain of communication through different components as described in US patent 11747849B2 In recent years, utilization of electrical energy increased exponentially and customer requirement and quality definitions of power were changed enormously. As electric energy became an essential part of daily life, its optimal usage and reliability became important. Real-time network view and dynamic decisions have become instrumental for optimizing resources and managing demands, leading to the need for distribution management systems in large-scale electrical networks. == Overview == Most distribution utilities have been comprehensively using IT solutions through their Outage Management System (OMS) that makes use of other systems like Customer Information System (CIS), Geographical Information System (GIS) and Interactive Voice Response System (IVRS). An outage management system has a network component/connectivity model of the distribution system. By combining the locations of outage calls from customers with knowledge of the locations of the protection devices (such as circuit breakers) on the network, a rule engine is used to predict the locations of outages. Based on this, restoration activities are charted out and the crew is dispatched for the same. In parallel with this, distribution utilities began to roll out Supervisory Control and Data Acquisition (SCADA) systems, initially only at their higher voltage substations. Over time, use of SCADA has progressively extended downwards to sites at lower voltage levels. DMSs access real-time data and provide all information on a single console at the control centre in an integrated manner. Their development varied across different geographic territories. In the US, for example, DMSs typically grew by taking Outage Management Systems to the next level, automating the complete sequences and providing an end to end, integrated view of the entire distribution spectrum. In the UK, by contrast, the much denser and more meshed network topologies, combined with stronger Health & Safety regulation, had led to early centralisation of high-voltage switching operations, initially using paper records and schematic diagrams printed onto large wallboards which were 'dressed' with magnetic symbols to show the current running states. There, DMSs grew initially from SCADA systems as these were expanded to allow these centralised control and safety management procedures to be managed electronically. These DMSs required even more detailed component/connectivity models and schematics than those needed by early OMSs as every possible isolation and earthing point on the networks had to be included. In territories such as the UK, therefore, the network component/connectivity models were usually developed in the DMS first, whereas in the USA these were generally built in the GIS. The typical data flow in a DMS has the SCADA system, the Information Storage & Retrieval (ISR) system, Communication (COM) Servers, Front-End Processors (FEPs) & Field Remote Terminal Units (FRTUs). == Why DMS? == Reduce the duration of outages Improve the speed and accuracy of outage predictions. Reduce crew patrol and drive times through improved outage locating. Improve the operational efficiency Determine the crew resources necessary to achieve restoration objectives. Effectively utilize resources between operating regions. Determine when best to schedule mutual aid crews. Increased customer satisfaction A DMS incorporates IVR and other mobile technologies, through which there is an improved outage communications for customer calls. Provide customers with more accurate estimated restoration times. Improve service reliability by tracking all customers affected by an outage, determining electrical configurations of every device on every feeder, and compiling details about each restoration process. == DMS Functions == In order to support proper decision making and O&M activities, DMS solutions should support the following functions: Network visualization & support tools Applications for Analytical & Remedial Action Utility Planning Tools System Protection Schemes The various sub functions of the same, carried out by the DMS are listed below:- === Network Connectivity Analysis (NCA) === Distribution network usually covers over a large area and catering power to different customers at different voltage levels. So locating required sources and loads on a larger GIS/Operator interface is often very difficult. Panning & zooming provided with normal SCADA system GUI does not cover the exact operational requirement. Network connectivity analysis is an operator specific functionality which helps the operator to identify or locate the preferred network or component very easily. NCA does the required analyses and provides display of the feed point of various network loads. Based on the status of all the switching devices such as circuit breaker (CB), Ring Main Unit (RMU) and/or isolators that affect the topology of the network modeled, the prevailing network topology is determined. The NCA further assists the operator to know operating state of the distribution network indicating radial mode, loops and parallels in the network. === Switching Schedule & Safety Management === In territories such as the UK a core function of a DMS has always been to support safe switching and work on the networks. Control engineers prepare switching schedules to isolate and make safe a section of network before work is carried out, and the DMS validates these schedules using its network model. Switching schedules can combine telecontrolled and manual (on-site) switching operations. When the required section has been made safe, the DMS allows a Permit To Work (PTW) document to be issued. After its cancellation when the work has been finished, the switching schedule then facilitates restoration of the normal running arrangements. Switching components can also be tagged to reflect any Operational Restrictions that are in force. The network component/connectivity model, and associated diagrams, must always be kept absolutely up to date. The switching schedule facility therefore also allows 'patches' to the network model to be applied to the live version at the appropriate stage(s) of the jobs. The term 'patch' is derived from the method previously used to maintain the wallboard diagrams. === State Estimation (SE) === The state estimator is an integral part of the overall monitoring and control systems for transmission networks. It is mainly aimed at providing a reliable estimate of the system voltages. This information from the state estimator flows to control centers and database servers across the network. The variables of interest are indicative of parameters like margins to operating limits, health of equipment and required operator action. State estimators allow the calculation of these variables of interest with high confidence despite the facts that the measurements may be corrupted by noise, or could be missing or inaccurate. Even though we may not be able to directly observe the state, it can be inferred from a scan of measurements which are assumed to be synchronized. The algorithms need to allow for the fact that presence of noise might skew the measurements. In a typical power system, the State is quasi-static. The time constants are sufficiently fast so that system dynamics decay away quickly (with respect to measurement frequency). The system appears to be progressing through a sequence of static states that are driven by various parameters like changes in load profile. The inputs of the state estimator can be given to various applications like Load Flow Analysis, Contingency Analysis, and other applications. === Load Flow Applications (LFA) === Load flow study is an important tool involving numerical analysis applied to a power system. The load flow study usually uses simplified notations like a single-line diagram and focuses on various forms of AC power rather than voltage and current. It analyzes the power systems in normal steady-state operation. The goal of a power flow study is to obtain complete voltage angle and magnitude information for each bus in a power system for specified load and generator real power and voltage conditions. Once this
Read more →
Framebuffer

A framebuffer (frame buffer, or sometimes framestore) is a portion of random-access memory (RAM) containing a bitmap that drives a video display. It is a memory buffer containing data representing all the pixels in a complete video frame. Modern video cards contain framebuffer circuitry in their cores. This circuitry converts an in-memory bitmap into a video signal that can be displayed on a computer monitor. In computing, a screen buffer is a part of computer memory used by a computer application for the representation of the content to be shown on the computer display. The screen buffer may also be called the video buffer, the regeneration buffer, or regen buffer for short. The phrase "screen buffer” refers to a logical function, while video memory refers to a hardware storage location. In particular, the screen buffer may be placed in the main RAM, the video memory, or some other hardware location. To reduce latency and avoid screen tearing, multiple frames can be buffered, and this technique is called multiple buffering. When this is so, at any time, only one frame would be visible, and the others would not be. The currently invisible frames are located in the off-screen buffer. The information in the buffer typically consists of color values for every pixel to be shown on the display. Color values are commonly stored in 1-bit binary (monochrome), 4-bit palettized, 8-bit palettized, 16-bit high color and 24-bit true color formats. An additional alpha channel is sometimes used to retain information about pixel transparency. The total amount of memory required for the framebuffer depends on the resolution of the output signal, and on the color depth or palette size. == History == Computer researchers had long discussed the theoretical advantages of a framebuffer but were unable to produce a machine with sufficient memory at an economically practicable cost. In 1947, the Manchester Baby computer used a Williams tube, later the Williams-Kilburn tube, to store 1024 bits on a cathode-ray tube (CRT) memory and displayed on a second CRT. Other research labs were exploring these techniques with MIT Lincoln Laboratory achieving a 4096 display in 1950. A color-scanned display was implemented in the late 1960s, called the Brookhaven RAster Display (BRAD), which used a drum memory and a television monitor. In 1969, A. Michael Noll of Bell Telephone Laboratories, Inc. implemented a scanned display with a frame buffer, using magnetic-core memory. A year or so later, the Bell Labs system was expanded to display an image with a color depth of three bits on a standard color TV monitor. The vector graphics used in the computer had to be converted for the scanned graphics of a TV display. In the early 1970s, the development of MOS memory (metal–oxide–semiconductor memory) integrated-circuit chips, particularly high-density DRAM (dynamic random-access memory) chips with at least 1 kb memory, made it practical to create, for the first time, a digital memory system with framebuffers capable of holding a standard video image. This led to the development of the SuperPaint system by Richard Shoup at Xerox PARC in 1972. Shoup was able to use the SuperPaint framebuffer to create an early digital video-capture system. By synchronizing the output signal to the input signal, Shoup was able to overwrite each pixel of data as it shifted in. Shoup also experimented with modifying the output signal using color tables. These color tables allowed the SuperPaint system to produce a wide variety of colors outside the range of the limited 8-bit data it contained. This scheme would later become commonplace in computer framebuffers. In 1974, Evans & Sutherland released the first commercial framebuffer, the Picture System, costing about $15,000. It was capable of producing resolutions of up to 512 by 512 pixels in 8-bit grayscale, and became a boon for graphics researchers who did not have the resources to build their own framebuffer. The New York Institute of Technology would later create the first 24-bit color system using three of the Evans & Sutherland framebuffers. Each framebuffer was connected to an RGB color output (one for red, one for green and one for blue), with a Digital Equipment Corporation PDP 11/04 minicomputer controlling the three devices as one. In 1975, the UK company Quantel produced the first commercial full-color broadcast framebuffer, the Quantel DFS 3000. It was first used in TV coverage of the 1976 Montreal Olympics to generate a picture-in-picture inset of the Olympic flaming torch while the rest of the picture featured the runner entering the stadium. The rapid improvement of integrated-circuit technology made it possible for many of the home computers of the late 1970s to contain low-color-depth framebuffers. Today, nearly all computers with graphical capabilities utilize a framebuffer for generating the video signal. Amiga computers, created in the 1980s, featured special design attention to graphics performance and included a unique Hold-And-Modify framebuffer capable of displaying 4096 colors. Framebuffers also became popular in high-end workstations and arcade system boards throughout the 1980s. SGI, Sun Microsystems, HP, DEC and IBM all released framebuffers for their workstation computers in this period. These framebuffers were usually of a much higher quality than could be found in most home computers, and were regularly used in television, printing, computer modeling and 3D graphics. Framebuffers were also used by Sega for its high-end arcade boards, which were also of a higher quality than on home computers. == Display modes == Framebuffers used in personal and home computing often had sets of defined modes under which the framebuffer can operate. These modes reconfigure the hardware to output different resolutions, color depths, memory layouts and refresh rate timings. In the world of Unix machines and operating systems, such conveniences were usually eschewed in favor of directly manipulating the hardware settings. This manipulation was far more flexible in that any resolution, color depth and refresh rate was attainable – limited only by the memory available to the framebuffer. An unfortunate side-effect of this method was that the display device could be driven beyond its capabilities. In some cases, this resulted in hardware damage to the display. More commonly, it simply produced garbled and unusable output. Modern CRT monitors fix this problem through the introduction of protection circuitry. When the display mode is changed, the monitor attempts to obtain a signal lock on the new refresh frequency. If the monitor is unable to obtain a signal lock or if the signal is outside the range of its design limitations, the monitor will ignore the framebuffer signal and possibly present the user with an error message. LCD monitors tend to contain similar protection circuitry, but for different reasons. Since the LCD must digitally sample the display signal (thereby emulating an electron beam), any signal that is out of range cannot be physically displayed on the monitor. == Color palette == Framebuffers have traditionally supported a wide variety of color modes. Due to the expense of memory, most early framebuffers used 1-bit (2 colors per pixel), 2-bit (4 colors), 4-bit (16 colors) or 8-bit (256 colors) color depths. The problem with such small color depths is that a full range of colors cannot be produced. The solution to this problem was indexed color, which adds a lookup table to the framebuffer. Each color stored in framebuffer memory acts as a color index. The lookup table serves as a palette with a limited number of different colors, while the rest is used as an index table. Here is a typical indexed 256-color image and its own palette (shown as a rectangle of swatches): In some designs, it was also possible to write data to the lookup table (or switch between existing palettes) on the fly, allowing dividing the picture into horizontal bars with their own palette and thus rendering an image that had a far wider palette. For example, viewing an outdoor shot photograph, the picture could be divided into four bars: the top one with emphasis on sky tones, the next with foliage tones, the next with skin and clothing tones, and the bottom one with ground colors. This required each palette to have overlapping colors, but, carefully done, allowed great flexibility. == Memory access == While framebuffers are commonly accessed via a memory mapping directly to the CPU memory space, this is not the only method by which they may be accessed. Framebuffers have varied widely in the methods used to access memory. Some of the most common are: Mapping the entire framebuffer to a given memory range. Port commands to set each pixel, range of pixels or palette entry. Mapping a memory range smaller than the framebuffer memory, then bank switching as necessary. The framebuffer organization may be packed pixel or planar. The framebuffer may be all
Read more →
MoltenVK

MoltenVK is a software library which allows Vulkan applications to run on top of Metal on Apple's macOS, iOS, and tvOS operating systems. It is the first software component to be released for the Vulkan Portability Initiative, a project to have a subset of Vulkan run on platforms lacking native Vulkan drivers. There are some limitations compared with a native Vulkan implementation. == History == MoltenVK was first released as a proprietary and commercially licensed product by The Brenwill Workshop on July 27, 2016. On July 31, 2017, Khronos announced the formation of the Vulkan Portability Technical Subgroup. === Open source === On February 26, 2018, Khronos announced that Vulkan became available on macOS and iOS products through the MoltenVK library. Valve announced that Dota 2 will run on macOS using the Vulkan API with the aid of MoltenVK, and that they had made an arrangement with developer The Brenwill Workshop Ltd to release MoltenVK as open-source software under the Apache License version 2.0. On May 30, 2018, Qt was updated with Vulkan for Qt on macOS using MoltenVK. On May 31, 2018, optional Vulkan support for Dota 2 on macOS was released. Benchmarks for the game were available the following day, showing better performance using Vulkan and MoltenVK compared to OpenGL. On July 20, 2018, Wine was updated with Vulkan support on macOS using MoltenVK. On 29 July 2018, the first app using MoltenVK was accepted onto the App Store, after initially being rejected. On 6 August 2018, Google open-sourced Filament, a crossplatform real-time physically based rendering engine with MoltenVK for macOS/iOS. On November 28, 2018, Valve released Artifact, their first Vulkan-only game on macOS using MoltenVK. === Version 1.0 === On 29 January 2019, MoltenVK 1.0.32 was released with early prototype of Vulkan Portability Extensions. RPCS3 and Dolphin emulators were updated with Vulkan support on macOS using MoltenVK. On 13 April 2019, MoltenVK 1.0.34 was released with support for tessellation. On July 30, 2019, MoltenVK 1.0.36 was released targeting Metal 3.0. On July 31, 2020, MoltenVK 1.0.44 was released, adding support for the tvOS platform. On January 23, 2020, MoltenVK was updated to support for some of the new features of Vulkan 1.2, as of Vulkan SDK 1.2.121. === Version 1.1 === On October 1, 2020, MoltenVK 1.1.0 was released, adding full support for Vulkan 1.1, as of Vulkan SDK 1.2.154. On 9 December 2020, MoltenVK 1.1.1 was released, providing support for Vulkan on Apple silicon GPUs and support for the Mac Catalyst platform for porting iOS/iPadOS apps to macOS. === Version 1.2 === On October 18, 2022, MoltenVK 1.2.0 was released, adding full support for Vulkan 1.2 as of Vulkan SDK 1.3.231. In January 2023, MoltenVK 1.2.2 added support for Vulkan as of SDK 1.3.239, while this version of Vulkan SDK fixed some issues with the interconnectivity with Metal API, while version 1.2.3 supported some additional extensions. === Version 1.3 === On May 1, 2025, MoltenVK 1.3 was released with support for Vulkan 1.3. === Version 1.4 === On August 20, 2025, MoltenVK 1.4 was released with support for Vulkan 1.4.
Read more →
AARON

AARON is the collective name for a series of computer programs written by artist Harold Cohen that create original artistic images autonomously, which set it apart from previous programs. Proceeding from Cohen's initial question "What are the minimum conditions under which a set of marks functions as an image?", AARON was in development between 1972 and the 2010s. As the software is not open source, its development effectively ended with Cohen's death in 2016. The name "AARON" does not seem to be an acronym; rather, it was a name chosen to start with the letter "A" so that the names of successive programs could follow it alphabetically. However, Cohen did not create any other major programs. Initial versions of AARON created abstract drawings that grew more complex through the 1970s. More representational imagery was added in the 1980s; first rocks, then plants, then people. In the 1990s more representational figures set in interior scenes were added, along with color. AARON returned to more abstract imagery, this time in color, in the early 2000s. Cohen used machines that allowed AARON to produce physical artwork. The first machines drew in black and white using a succession of custom-built "turtle" and flatbed plotter devices. Cohen would sometimes color these images by hand in fabric dye (Procion), or scale them up to make larger paintings and murals. In the 1990s Cohen built a series of digital painting machines to output AARON's images in ink and fabric dye. His later work used a large-scale inkjet printer on canvas. Development of AARON began in the C programming language then switched to Lisp in the early 1990s. Cohen credits Lisp with helping him solve the challenges he faced in adding color capabilities to AARON. An article about Cohen appeared in Computer Answers that describes AARON and shows two line drawings that were exhibited at the Tate gallery. The article goes on to describe the workings of AARON, then running on a DEC VAX 750 minicomputer. Raymond Kurzweil's company has produced a downloadable screensaver of AARON for Microsoft Windows PCs. This version of AARON can also produce printable images. AARON's source code is not publicly available, but Cohen has described AARON's operations in various essays and it is discussed in abstract in Pamela McCorduck's book. AARON cannot learn new styles or imagery on its own; each new capability must be hand-coded by Cohen. It is capable of producing a practically infinite supply of distinct images in its own style. Examples of these images have been exhibited in galleries worldwide. AARON's artwork has been used as an artistic equivalent of the Turing test. It does seem however that AARON's output follows a noticeable formula (figures standing next to a potted plant, framed within a colored square is a common theme). Cohen is very careful not to claim that AARON is creative. But he does ask "If what AARON is making is not art, what is it exactly, and in what ways, other than its origin, does it differ from the 'real thing?' If it is not thinking, what exactly is it doing?" — The further exploits of AARON, Painter. The Whitney Museum featured AARON in 2024, showcasing the evolution of AARON as the earliest artificial intelligence (AI) program for artmaking.
Read more →
Kernel (image processing)

In image processing, a kernel, convolution matrix, or mask is a small matrix used for blurring, sharpening, embossing, edge detection, and more. This is accomplished by doing a convolution between the kernel and an image. Or more simply, when each pixel in the output image is a function of the nearby pixels (including itself) in the input image, the kernel is that function. == Details == The general expression of a convolution is g x , y = ω ∗ f x , y = ∑ i = − a a ∑ j = − b b ω i , j f x − i , y − j , {\displaystyle g_{x,y}=\omega f_{x,y}=\sum _{i=-a}^{a}{\sum _{j=-b}^{b}{\omega _{i,j}f_{x-i,y-j}}},} where g ( x , y ) {\displaystyle g(x,y)} is the filtered image, f ( x , y ) {\displaystyle f(x,y)} is the original image, ω {\displaystyle \omega } is the filter kernel. Every element of the filter kernel is considered by − a ≤ i ≤ a {\displaystyle -a\leq i\leq a} and − b ≤ j ≤ b {\displaystyle -b\leq j\leq b} . Depending on the element values, a kernel can cause a wide range of effects: The above are just a few examples of effects achievable by convolving kernels and images. === Origin === The origin is the position of the kernel which is above (conceptually) the current output pixel. This could be outside of the actual kernel, though usually it corresponds to one of the kernel elements. For a symmetric kernel, the origin is usually the center element. == Convolution == Convolution is the process of adding each element of the image to its local neighbors, weighted by the kernel. This is related to a form of mathematical convolution. The matrix operation being performed—convolution—is not traditional matrix multiplication, despite being similarly denoted by . For example, if we have two three-by-three matrices, the first a kernel, and the second an image piece, convolution is the process of flipping both the rows and columns of the kernel and multiplying locally similar entries and summing. The element at coordinates [2, 2] (that is, the central element) of the resulting image would be a weighted combination of all the entries of the image matrix, with weights given by the kernel: ( [ a b c d e f g h i ] ∗ [ 1 2 3 4 5 6 7 8 9 ] ) [ 2 , 2 ] = {\displaystyle \left({\begin{bmatrix}a&b&c\\d&e&f\\g&h&i\end{bmatrix}}{\begin{bmatrix}1&2&3\\4&5&6\\7&8&9\end{bmatrix}}\right)[2,2]=} ( i ⋅ 1 ) + ( h ⋅ 2 ) + ( g ⋅ 3 ) + ( f ⋅ 4 ) + ( e ⋅ 5 ) + ( d ⋅ 6 ) + ( c ⋅ 7 ) + ( b ⋅ 8 ) + ( a ⋅ 9 ) . {\displaystyle (i\cdot 1)+(h\cdot 2)+(g\cdot 3)+(f\cdot 4)+(e\cdot 5)+(d\cdot 6)+(c\cdot 7)+(b\cdot 8)+(a\cdot 9).} The other entries would be similarly weighted, where we position the center of the kernel on each of the boundary points of the image, and compute a weighted sum. The values of a given pixel in the output image are calculated by multiplying each kernel value by the corresponding input image pixel values. This can be described algorithmically with the following pseudo-code: for each image row in input image: for each pixel in image row: set accumulator to zero for each kernel row in kernel: for each element in kernel row: if element position corresponding to pixel position then multiply element value corresponding to pixel value add result to accumulator endif set output image pixel to accumulator corresponding input image pixels are found relative to the kernel's origin. If the kernel is symmetric then place the center (origin) of the kernel on the current pixel. The kernel will overlap the neighboring pixels around the origin. Each kernel element should be multiplied with the pixel value it overlaps with and all of the obtained values should be summed. This resultant sum will be the new value for the current pixel currently overlapped with the center of the kernel. If the kernel is not symmetric, it has to be flipped both around its horizontal and vertical axis before calculating the convolution as above. The general form for matrix convolution is [ x 11 x 12 ⋯ x 1 n x 21 x 22 ⋯ x 2 n ⋮ ⋮ ⋱ ⋮ x m 1 x m 2 ⋯ x m n ] ∗ [ y 11 y 12 ⋯ y 1 n y 21 y 22 ⋯ y 2 n ⋮ ⋮ ⋱ ⋮ y m 1 y m 2 ⋯ y m n ] = ∑ i = 0 m − 1 ∑ j = 0 n − 1 x ( m − i ) ( n − j ) y ( 1 + i ) ( 1 + j ) {\displaystyle {\begin{bmatrix}x_{11}&x_{12}&\cdots &x_{1n}\\x_{21}&x_{22}&\cdots &x_{2n}\\\vdots &\vdots &\ddots &\vdots \\x_{m1}&x_{m2}&\cdots &x_{mn}\\\end{bmatrix}}{\begin{bmatrix}y_{11}&y_{12}&\cdots &y_{1n}\\y_{21}&y_{22}&\cdots &y_{2n}\\\vdots &\vdots &\ddots &\vdots \\y_{m1}&y_{m2}&\cdots &y_{mn}\\\end{bmatrix}}=\sum _{i=0}^{m-1}\sum _{j=0}^{n-1}x_{(m-i)(n-j)}y_{(1+i)(1+j)}} === Edge handling === Kernel convolution usually requires values from pixels outside of the image boundaries. There are a variety of methods for handling image edges. Extend The nearest border pixels are conceptually extended as far as necessary to provide values for the convolution. Corner pixels are extended in 90° wedges. Other edge pixels are extended in lines. Wrap The image is conceptually wrapped (or tiled) and values are taken from the opposite edge or corner. Mirror The image is conceptually mirrored at the edges. For example, attempting to read a pixel 3 units outside an edge reads one 3 units inside the edge instead. Crop / Avoid overlap Any pixel in the output image which would require values from beyond the edge is skipped. This method can result in the output image being slightly smaller, with the edges having been cropped. Move kernel so that values from outside of image is never required. Machine learning mainly uses this approach. Example: Kernel size 10x10, image size 32x32, result image is 23x23. Kernel Crop Any pixel in the kernel that extends past the input image isn't used and the normalizing is adjusted to compensate. Constant Use constant value for pixels outside of image. Usually black or sometimes gray is used. Generally this depends on application. === Normalization === Normalization is defined as the division of each element in the kernel by the sum of all kernel elements, so that the sum of the elements of a normalized kernel is unity. This will ensure the average pixel in the modified image is as bright as the average pixel in the original image. === Optimization === Fast convolution algorithms include: separable convolution ==== Separable convolution ==== 2D convolution with an M × N kernel requires M × N multiplications for each sample (pixel). If the kernel is separable, then the computation can be reduced to M + N multiplications. Using separable convolutions can significantly decrease the computation by doing 1D convolution twice instead of one 2D convolution. === Implementation === Here a concrete convolution implementation done with the GLSL shading language :
Read more →
Logogen model

The logogen model of 1969 is a model of speech recognition that uses units called "logogens" to explain how humans comprehend spoken or written words. Logogens are a vast number of specialized recognition units, each able to recognize one specific word. This model provides for the effects of context on word recognition. == Overview == The word logogen can be traced back to the Greek-language word logos, which means "word", and genus, which means "birth". British scientist John Morton's logogen model was designed to explain word recognition using a new type of unit known as a logogen. A critical element of this theory is the involvement of lexicons, or specialized aspects of memory that include semantic and phonemic information about each item that is contained in memory. A given lexicon consists of many smaller, abstract items known as logogens. Logogens contain a variety of properties about given word such as their appearance, sound, and meaning. Logogens do not store words within themselves, but rather they store information that is specifically necessary for retrieval of whatever word is being searched for. A given logogen will become activated by psychological stimuli or contextual information (words) that is consistent with the properties of that specific logogen and when the logogen's activation level rises to or above its threshold level, the pronunciation of the given word is sent to the output system. Certain stimuli can affect the activation levels of more than one word at a time, usually involving words that are similar to one another. When this occurs, whichever of the words' activation levels reaches the threshold level, it is that word that is then sent to the output system with the subject remaining unaware of any partially excited logogens. This assumption was made by Marslen-Wilson and Welch (1978), who added to the model some assumptions of their own in order to account for their experimental results. They also assumed that the analysis of phonetic input can only become available to other parts of the system by process of how the input affects the logogen system. Finally, Marslen-Wilson and Welch assume that the first syllable of a given word will increase the activation level of a given logogen more than those of the latter syllables, which supported the data found at the time. == Analysis == The logogen model can be used to help linguists explain particular occurrences in the human language. The most-helpful application of the model is to show how one accesses words and their meanings in the lexicon. The word-frequency effect is best explained by the logogen model in that words (or logogens) that have a higher frequency (or are more common) have a lower threshold. This means that they require less perceptual power in the brain to be recognized and decoded from the lexicon and are recognized faster than those words that are less common. Also, with high-frequency words, the recovery from lowering the item's threshold is less fulfilled compared to low-frequency words so less sensory information is needed for that particular item's recognition. There are ways to lower thresholds, such as repetition and semantic priming. Also, each time a word is encountered through these methods, the threshold for that word is temporarily lowered partially because of its recovering ability. This model also conveys that specific concrete words are recalled better because they use images and logogens, whereas abstract words are not as easily recalled well because they only use logogens, hence showing the difference in thresholds between these two types of words. At the time of its conception, Morton's logogen model was one of the most influential models in springing up other parallel word access models and served as the essential basis for these subsequent models. Morton's model also strongly influenced other contemporary theories on lexical access. However, despite the advantages that the logogen theory presents, it also displays some negative facets. First and foremost, the logogen model does not explain all occurrences in language, such as the introduction of new words or non-words into a person's lexicon. Also, because of the distinctive model application, it may vary in its effectiveness in different languages. == Criticisms == While this model does a reasonable job of understanding the underlying semantics of many aspects in psycholinguistics, there are some flaws that have been pointed out in the logogen model. It has been argued that the prior stimulus patterns that have been seen in the logogen theory are not centrally localized in the logogen itself but are actually distributed throughout the different pathways over which the stimulus is being processed. What this directs at is that the notion and proliferation of logogens was due to modality. In essence, the logogen is unnecessary in the idea of attaining the title of being a recognition unit because of the variety of pathways that it is open to, not just logogens. Another criticism has been that this model essentially ignores larger and more critical structures in language and phonetics such as the different syntactic rules or grammatical construction that innately exists in language. Since this model overtly limits itself to the scope of lexical access then this model is seen as biased and misunderstood. To many psychologists, the logogen model does not meet the functional or representational adequacy that a theory should include to sufficiently comprehend language. Also, another criticism is that the logogen theory was supposed to predict that stimulus degradation should affect priming and word frequency in humans. However, many psychologists have conducted studies and researched the model to show that only priming and not word frequency is interacted with stimulus degradation. Priming is supposed to deteriorate a stimulus because it postulates that the semantic characteristics of previously known words are fed back into the detector of a person which in turn raises the threshold of related items. In word frequency, stimulus degradation is supposed to occur because it postulates that familiar words have lower thresholds than their low-frequency counterparts. However, in studies, priming is the only structure that does show observable and notable stimulus decadence. Even though the logogen theory has many unfilled holes, Morton was a revolutionary of his field whose speculation and research has opened up a remarkable era of psycholinguistics. == Other models to consider == cohort model – This model was proposed by Marslen-Wilson and was designed specifically to account for auditory word recognition. It works by breaking the word down and states that when a word is heard all words that begin with the first sound of the target word are activated. This set of words is considered the cohort. Once the first cohort has been activated, the other information, or sounds in the word narrow down the choices. The person recognizes the word when you are left with a single choice; this is considered the "recognition point". checking model – This model was developed by Norris in 1986. In this particular model, he took the approach that any word that partially matches the input is analyzed and checked to see if it fits with the context of the situation. interactive-activation model – This model is considered a connectionist model. Proposed by McClelland and Rumelhart in the 1981 to 1982 period, it is based around nodes, which are visual features, and positions of letters within a given word. They also act as word detectors which have inhibitory and excitatory connections between them. This model starts with first letter and suggests that all the words with that first letter are activated at first and then going through the word one can determine what the word is they are looking at. The main principle is that mental phenomena can be described by interconnected networks of simple units. verification model – The model was developed by Curtis Becker in 1970. The main idea is that a small number of candidates that are activated in parallel are subject to a serial-verification process. This model starts the word-recognition process with a basic representation of the stimulus. Then, sensory trace, consisting of line features is used to activate word detectors. When an acceptable number of detectors are activated these are used to generate a search set. These items are drawn from the lexicon on the basis of similarity to the sensory trace, which help with the identity of the stimulus. Then, in a serial process the candidates are compared to the representation of the sensory-trace input. == Related concepts == word frequency – This is the belief that the speed and accuracy with which a word is recognized is related to how frequently the word occurs in our language. Each logogen has a threshold (for identification) and words with higher frequencies have lower thresholds. Words with higher freq
Read more →
Zero-knowledge service

In cloud computing, the term zero-knowledge (or occasionally no-knowledge or zero-access) is a commonly used term for online services that store, transfer or manipulate data with a high level of confidentiality, where the data is only accessible to the data's owner (the client), and not to the service provider. However, unlike "end-to-end encryption", the term "zero-knowledge" does not imply any specific threat model or security notion, and its use is commonly frowned-upon by the security community. The term "zero-knowledge" was popularized by backup service SpiderOak, which later switched to using the term "no knowledge", acknowledging that the previous terminology was not technically accurate. == Disadvantages == Most cloud storage services keep a copy of the client's password on their servers, allowing clients who have lost their passwords to retrieve and decrypt their data using alternative means of authentication; but since zero-knowledge services do not store copies of clients' passwords, if a client loses their password then their data cannot be decrypted, making it practically unrecoverable. Most of the most used cloud storage services, such as Google Drive, Dropbox, OneDrive or iCloud, are also able to furnish access requests from law enforcement agencies for similar reasons; zero-knowledge services, however, are unable to do so, since their systems are designed to make clients' data inaccessible without the client's explicit cooperation.
Read more →
Prequel (mobile application)

Prequel, Inc. is an American technology company and mobile app developer known for developing the Prequel mobile application, which enables editing photos and videos with filters and effects generated using artificial intelligence. Prequel was founded in 2018 by Serge Aliseenko and Timur Khabirov, who currently serves as the company's CEO. It is headquartered in New York City. As of August 2022, it had been downloaded more than 100 million times. == History == In 2016, entrepreneur Timur Khabirov and investor Serge Aliseenko registered a US corporation named AIAR Labs Inc, which was developing AR solutions as an outsourced contractor. Of several proprietary products, Prequel was selected for beta-testing as a product focused on editing photos and videos. In 2018, Prequel was released on the Apple App Store. The launch cost $3 million USD, financed with the founders’ personal funds. The first release included approximately 10 filters for photos and the same amount of effects that augmented images with rose petals, rain and snow, VHS and film reel simulations, glitch, grain, sun puddles, and lomography. By June 2020, the app had also been released for Android. In 2021, Prequel founders Timur Khabirov and Serge Aliseenko launched a venture studio for startups working with artificial, computer vision, and AR-based visual art. In December 2022, Prequel reached the number 14 slot on the global rankings for Apple App Store’s Top Charts and the number 5 slot on the App Store’s U.S. charts. In March 2023, Prequel launched a new app called Artique, which is an AI-powered image editing app for businesses. Artique provides advertising and marketing graphic design using ready-made templates that users can customize, while giving suggestions and visual cues through artificial intelligence. Prequel was also one of the companies participating in discussions about artificial intelligence at SXSW 2023. == Features == Prequel describes its app as an "Aesthetic Pic Editor. The app uses artificial intelligence to create and edit content. Prequel can be used to touch up faces on images and videos and can also tie various decorative elements to certain points on the human body and face. Prequel filters include the "Cartoon" filter, which converts selfies into cartoon-style pictures. Other filters include Kidcore, Dust, Grain, Fisheye, Retro Style, Miami, Disco, and VHS-style filters, as well as the ability to create Renaissance-style pictures. Prequel also gives users the ability to apply color correction tools and to make moving images with 3D effects out of 2D images. Prequel allows users to take photos and videos directly through the app and apply filters and effects in real time. The app also comes with manual editing options for photos, such as adjusting the brightness and/or exposure and cropping photos, as well as an option to automatically apply adjustments. The Prequel app uses the Core ML, MNN, and TFLight frameworks to work with its neural networks. Some AI solutions are launched server-side, and some on the user's mobile device. A resulting photo or video edited with the app is called "a prequel." The app daily generates over 2 million such prequels, which are published by users in Instagram, TikTok, and other social media. As of 2022, the app has more than 800 filters and effects, along with video templates and support for GIFs and stickers. Prequel is free-to-use, but has a premium version that gives users access to more effects, filters, and beauty tools. Since its launch in 2018, Prequel has been downloaded more than 100 million times.
Read more →
Dyme (company)

Dyme is a Dutch fintech start-up and subscription management app that allows users to cancel and renegotiate their recurring costs. In 2019, Dyme was the first independent Dutch company to receive a PSD2 licence from the Netherlands' central bank (DNB). == History == Dyme was founded in 2018 by Joran Iedema, David Knap, David Schogt and Wouter Florijn. The four had previously founded Cycleswap, a bicycle rental platform launched in 2015 and sold to the American platform Spinlister in 2016. The company gained notability in the Netherlands in 2020 when it appeared on Dutch television in Dragons Den, where Pieter Schoen made a €750,000 bid in an attempt to acquire 51.01% of the company. Dyme's Joran Iedema rejected the deal. == Recognition == Wired described Dyme as one of the "hottest start-ups in Europe" in 2021. As of 2021, the company reportedly had 350,000 registered users in the Netherlands and Great Britain.
Read more →