AI Assistant Job Description

AI Assistant Job Description — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Digital sculpting

  Digital sculpting, also known as sculpt modeling or 3D sculpting, is the use of software that offers tools to push, pull, smooth, grab, pinch or otherwise manipulate a digital object as if it were made of a real-life substance such as clay. == Sculpting technology == The geometry used in digital sculpting programs to represent the model can vary; each offers different benefits and limitations. The majority of digital sculpting tools on the market use mesh-based geometry, in which an object is represented by an interconnected surface mesh of polygons that can be pushed and pulled around. This is somewhat similar to the physical process of beating copper plates to sculpt a scene in relief. Other digital sculpting tools use voxel-based geometry, in which the volume of the object is the basic element. Material can be added and removed, much like sculpting in clay. Still other tools make use of more than one basic geometry representation. A benefit of mesh-based programs is that they support sculpting at multiple resolutions on a single model. Areas of the model that are finely detailed can have very small polygons while other areas can have larger polygons. In many mesh-based programs, the mesh can be edited at different levels of detail, and the changes at one level will propagate to higher and lower levels of model detail. A limitation of mesh-based sculpting is the fixed topology of the mesh; the specific arrangement of the polygons can limit the ways in which detail can be added or manipulated. A benefit of voxel-based sculpting is that voxels allow complete freedom over form. The topology of a model can be altered continually during the sculpting process as material is added and subtracted, which frees the sculptor from considering the layout of polygons on the model's surface. After sculpting, it may be necessary to retopologize the model to obtain a clean mesh for use in animation or real-time rendering. Voxels, however, are more limited in handling multiple levels of detail. Unlike mesh-based modeling, broad changes made to voxels at a low level of detail may completely destroy finer details. == Uses == Sculpting can often introduce details to meshes that would otherwise have been difficult or impossible to create using traditional 3D modeling techniques. This makes it preferable for achieving photorealistic and hyperrealistic results, though, many stylized results are achieved as well. Sculpting is primarily used in high poly organic modeling (the creation of 3D models which consist mainly of curves or irregular surfaces, as opposed to hard surface modeling). It is also used by auto manufacturers in their design of new cars. It can create the source meshes for low poly game models used in video games. In conjunction with other 3D modeling and texturing techniques and Displacement and Normal mapping, it can greatly enhance the appearance of game meshes often to the point of photorealism. Some sculpting programs like 3D-Coat, Zbrush, and Mudbox offer ways to integrate their workflows with traditional 3D modeling and rendering programs. Conversely, 3D modeling applications like 3ds Max, Maya and MODO are now incorporating sculpting capability as well, though these are usually less advanced than tools found in sculpting-specific applications. High poly sculpts are also extensively used in CG artwork for movies, industrial design, art, photorealistic illustrations, and for prototyping in 3D printing. == 3D print == Sculptors and digital artists use digital sculpting to create a model (or Digital Twin) to be materialized through CNC technologies including 3D printing. The final sculptures are often called Digital Sculpture or 3D printed art. While digital technologies have emerged in many art disciplines (painting, photography), this is less the case for digital sculpture due to the higher complexity and technology limitations to produce the final sculpture. == Sculpting Process == The best way to learn sculpture is by understanding primary, secondary and tertiary forms. First, break down the object you want to make down its basic shapes, such as a sphere or cube. Focus on making the large, overall shape of the object. After that, work on the bigger shapes on top of or inside the object. These can be protrusions or cut outs. Then, do a final detail pass, such as pores or lines to break up the shape. == Sculpting programs == There are a number of digital sculpting tools available. Some popular tools for creating are: Traditional 3D modeling suites are also beginning to include sculpting capability. 3D modeling programs which currently feature some form of sculpting include the following:

  Read more →
• 

  Lenna

  Lenna (or Lena) is a standard test image used in the field of digital image processing, starting in 1973. It is a picture of the Swedish model Lena Forsén, shot by photographer Dwight Hooker and cropped from the centerfold of the November 1972 issue of Playboy magazine. Lenna has attracted controversy because of its subject matter. Starting in the mid-2010s, many journals have deemed it inappropriate and discouraged its use, while others have banned it from publication outright. Forsén herself has called for it to be retired, saying "It's time I retired from tech." The spelling "Lenna" came from the model's desire to encourage the proper pronunciation of her name. "I didn't want to be called Leena [English: ]," she explained. == History == Before Lenna, the first use of a Playboy magazine image to illustrate image processing algorithms was in 1961. Lawrence G. Roberts used two cropped six-bit grayscale facsimile scanned images from Playboy's July 1960 issue featuring Playmate Teddi Smith, in his master's thesis on image dithering at Massachusetts Institute of Technology. Lenna was originally intended for high resolution color image processing study. Its history was described in the May 2001 newsletter of the IEEE Professional Communication Society, in an article by Jamie Hutchinson: Alexander Sawchuk estimates that it was in June or July of 1973 when he, then an assistant professor of electrical engineering at the University of Southern California Signal and Image Processing Institute (SIPI), along with a graduate student and the SIPI lab manager, was hurriedly searching the lab for a good image to scan for a colleague's conference paper. They got tired of their stock of usual test images, dull stuff dating back to television standards work in the early 1960s. They wanted something glossy to ensure good output dynamic range, and they wanted a human face. Just then, somebody happened to walk in with a recent issue of Playboy. The engineers tore away the top third of the centerfold so they could wrap it around the drum of their Muirhead wirephoto scanner, which they had outfitted with analog-to-digital converters (one each for the red, green, and blue channels) and a Hewlett Packard 2100 minicomputer. The Muirhead had a fixed resolution of 100 lines per inch and the engineers wanted a 512×512 image, so they limited the scan to the top 5.12 inches of the picture, effectively cropping it at the subject's shoulders. The image's reach was limited in the 1970s and 80s, which is reflected in it initially only appearing in .org domains, but in July 1991, the image featured on the cover of Optical Engineering alongside Peppers, another popular test image. This drew the attention of Playboy to the potential copyright infringement. The peak of image hits on the internet was in 1995. The scan became one of the most used images in computer history. The use of the photo in electronic imaging has been described as "clearly one of the most important events in [its] history". The image spread to over 100 different domains, particularly .com and .edu. In a 1999 issue of IEEE Transactions on Image Processing "Lena" was used in three separate articles, and the picture continued to appear in scientific journals throughout the beginning of the 21st century. Lenna is so widely accepted in the image processing community that Forsén was a guest at the 50th annual Conference of the Society for Imaging Science and Technology (IS&T) in 1997. In 2015, Lena Forsén was also guest of honor at the banquet of IEEE ICIP 2015. After delivering a speech, she chaired the best paper award ceremony. To explain why the image became a standard in the field, David C. Munson, editor-in-chief of IEEE Transactions on Image Processing, stated that it was a good test image because of its detail, flat regions, shading, and texture. He also noted that "the Lena image is a picture of an attractive woman. It is not surprising that the (mostly male) image processing research community gravitated toward an image that they found attractive." While Playboy often cracks down on illegal uses of its material and did initially send a notice to the publisher of Optical Engineering about its unauthorized use in that publication, over time it has decided to overlook the wide use of Lena. Eileen Kent, VP of new media at Playboy, said, "We decided we should exploit this, because it is a phenomenon." == Criticism == The use of the image has produced controversy because Playboy is "seen (by some) as being degrading to women". In a 1999 essay on reasons for the male predominance in computer science, applied mathematician Dianne P. O'Leary wrote: Suggestive pictures used in lectures on image processing ... convey the message that the lecturer caters to the males only. For example, it is amazing that the "Lena" pin-up image is still used as an example in courses and published as a test image in journals today. A 2012 paper on compressed sensing used a photo of the model Fabio Lanzoni as a test image to draw attention to this issue. The use of the test image at the magnet school Thomas Jefferson High School for Science and Technology in Fairfax County, Virginia, provoked a guest editorial by a senior in The Washington Post in 2015 about its detrimental impact on aspiring female students in computer science. In 2017, the Journal of Modern Optics published an editorial titled "On alternatives to Lenna" suggesting three images (Pirate, Cameraman, and Peppers) that "are reasonably close to Lenna in feature space". In 2018, the Nature Nanotechnology journal announced that they would no longer consider articles using Lenna. In the same year SPIE, the publishers of Optical Engineering, also announced that they "strongly discourage" the use of Lenna, and would no longer consider new submissions containing the image "without convincing scientific justification for its use". They noted that aside from the copyright and ethical issues, that it was also no longer useful as a standard image: "In today's age of high-resolution digital image technology, it seems difficult to argue that a 512 × 512 image produced with a 1970s-era analog scanner is the best we have to offer as an image quality test standard". Forsén stated in the 2019 documentary film Losing Lena, "I retired from modeling a long time ago. It's time I retired from tech, too... Let's commit to losing me." The Institute of Electrical and Electronics Engineers (IEEE) announced that, starting April 1, 2024, it will no longer allow use of Lenna in its publications.

  Read more →
• 

  Lucy–Hook coaddition method

  The Lucy–Hook coaddition method is an image processing technique for combining sub-stepped astronomical image data onto a finer grid. The method allows the option of resolution and contrast enhancement or the choice of a conservative, re-convolved, output. Tests with very deep Hubble Space Telescope Wide Field and Planetary Camera 2 (WFPC2) imaging data of excellent quality show that these methods can be very effective and allow fine-scale features to be studied better than on the unprocessed images. The Lucy–Hook coaddition method is an extension of the standard Richardson–Lucy deconvolution iterative restoration method. For many purposes it may be more convenient to combine dithered datasets using the Drizzle method.

  Read more →
• 

  Landweber iteration

  The Landweber iteration or Landweber algorithm is an algorithm to solve ill-posed linear inverse problems, and it has been extended to solve non-linear problems that involve constraints. The method was first proposed in the 1950s by Louis Landweber, and it can be now viewed as a special case of many other more general methods. == Basic algorithm == The original Landweber algorithm attempts to recover a signal x from (noisy) measurements y. The linear version assumes that y = A x {\displaystyle y=Ax} for a linear operator A. When the problem is in finite dimensions, A is just a matrix. When A is nonsingular, then an explicit solution is x = A − 1 y {\displaystyle x=A^{-1}y} . However, if A is ill-conditioned, the explicit solution is a poor choice since it is sensitive to any noise in the data y. If A is singular, this explicit solution doesn't even exist. The Landweber algorithm is an attempt to regularize the problem, and is one of the alternatives to Tikhonov regularization. We may view the Landweber algorithm as solving: min x ‖ A x − y ‖ 2 2 / 2 {\displaystyle \min _{x}\|Ax-y\|_{2}^{2}/2} using an iterative method. The algorithm is given by the update x k + 1 = x k − ω A ∗ ( A x k − y ) . {\displaystyle x_{k+1}=x_{k}-\omega A^{}(Ax_{k}-y).} where the relaxation factor ω {\displaystyle \omega } satisfies 0 < ω < 2 / σ 1 2 {\displaystyle 0<\omega <2/\sigma _{1}^{2}} . Here σ 1 {\displaystyle \sigma _{1}} is the largest singular value of A {\displaystyle A} . If we write f ( x ) = ‖ A x − y ‖ 2 2 / 2 {\displaystyle f(x)=\|Ax-y\|_{2}^{2}/2} , then the update can be written in terms of the gradient x k + 1 = x k − ω ∇ f ( x k ) {\displaystyle x_{k+1}=x_{k}-\omega \nabla f(x_{k})} and hence the algorithm is a special case of gradient descent. For ill-posed problems, the iterative method needs to be stopped at a suitable iteration index, because it semi-converges. This means that the iterates approach a regularized solution during the first iterations, but become unstable in further iterations. The reciprocal of the iteration index 1 / k {\displaystyle 1/k} acts as a regularization parameter. A suitable parameter is found, when the mismatch ‖ A x k − y ‖ 2 2 {\displaystyle \|Ax_{k}-y\|_{2}^{2}} approaches the noise level. Using the Landweber iteration as a regularization algorithm has been discussed in the literature. == Nonlinear extension == In general, the updates generated by x k + 1 = x k − τ ∇ f ( x k ) {\displaystyle x_{k+1}=x_{k}-\tau \nabla f(x_{k})} will generate a sequence f ( x k ) {\displaystyle f(x_{k})} that converges to a minimizer of f whenever f is convex and the stepsize τ {\displaystyle \tau } is chosen such that 0 < τ < 2 / ( ‖ ∇ f ‖ 2 ) {\displaystyle 0<\tau <2/(\|\nabla f\|^{2})} where ‖ ⋅ ‖ {\displaystyle \|\cdot \|} is the spectral norm. Since this is special type of gradient descent, there currently is not much benefit to analyzing it on its own as the nonlinear Landweber, but such analysis was performed historically by many communities not aware of unifying frameworks. The nonlinear Landweber problem has been studied in many papers in many communities; see, for example. == Extension to constrained problems == If f is a convex function and C is a convex set, then the problem min x ∈ C f ( x ) {\displaystyle \min _{x\in C}f(x)} can be solved by the constrained, nonlinear Landweber iteration, given by: x k + 1 = P C ( x k − τ ∇ f ( x k ) ) {\displaystyle x_{k+1}={\mathcal {P}}_{C}(x_{k}-\tau \nabla f(x_{k}))} where P {\displaystyle {\mathcal {P}}} is the projection onto the set C. Convergence is guaranteed when 0 < τ < 2 / ( ‖ A ‖ 2 ) {\displaystyle 0<\tau <2/(\|A\|^{2})} . This is again a special case of projected gradient descent (which is a special case of the forward–backward algorithm) as discussed in. == Applications == Since the method has been around since the 1950s, it has been adopted and rediscovered by many scientific communities, especially those studying ill-posed problems. In X-ray computed tomography it is called simultaneous iterative reconstruction technique (SIRT). It has also been used in the computer vision community and the signal restoration community. It is also used in image processing, since many image problems, such as deconvolution, are ill-posed. Variants of this method have been used also in sparse approximation problems and compressed sensing settings.

  Read more →
• 

  Robotic process automation

  Robotic process automation (RPA) is a form of business process automation that is based on software robots (bots) or artificial intelligence (AI) agents. RPA should not be confused with artificial intelligence as it is based on automation technology following a predefined workflow. It is sometimes referred to as software robotics (not to be confused with robot software). In traditional workflow automation tools, a software developer produces a list of actions to automate a task and interface to the back end system using internal application programming interfaces (APIs) or dedicated scripting language. In contrast, RPA systems develop the action list by watching the user perform that task in the application's graphical user interface (GUI) and then perform the automation by repeating those tasks directly in the GUI. This can lower the barrier to the use of automation in products that might not otherwise feature APIs for this purpose. RPA tools have strong technical similarities to graphical user interface testing tools. These tools also automate interactions with the GUI, and often do so by repeating a set of demonstration actions performed by a user. RPA tools differ from such systems in that they allow data to be handled in and between multiple applications, for instance, receiving email containing an invoice, extracting the data, and then typing that into a bookkeeping system. == Historic evolution == As a form of automation, the concept has been around for a long time in the form of screen scraping, so long that to early PC users the reminder of it often blurs with the idea of malware infection. Yet compared to screen scraping, RPA is much more extensible, consisting of API integration into other enterprise applications, connectors into ITSM systems, terminal services and even some types of AI (e.g. machine learning) services such as image recognition. It is considered to be a significant technological evolution in the sense that new software platforms are emerging which are sufficiently mature, resilient, scalable and reliable to make this approach viable for use in large enterprises (who would otherwise be reluctant due to perceived risks to quality and reputation). == Use == The hosting of RPA services also aligns with the metaphor of a software robot, with each robotic instance having its own virtual workstation, much like a human worker. The robot uses keyboard and mouse controls to take actions and execute automations. Normally, all of these actions take place in a virtual environment and not on screen; the robot does not need a physical screen to operate, rather it interprets the screen display electronically. The scalability of modern solutions based on architectures such as these owes much to the advent of virtualization technology, without which the scalability of large deployments would be limited by the available capacity to manage physical hardware and by the associated costs. The implementation of RPA in business enterprises has shown dramatic cost savings when compared to traditional non-RPA solutions. === RPA actual use === Banking and finance process automation Mortgage and lending processes Customer care automation eCommerce merchandising operations Social media marketing Optical character recognition applications Data extraction process Fixed automation process Manual and repetitive tasks automation Voice recognition and digital dictation software linked to join up business processes for straight through processing without manual intervention Specialised remote infrastructure management software featuring automated investigation and resolution of problems, using robots for the first line IT support Chatbots used by internet retailers and service providers to service customer requests for information. Also used by companies to service employee requests for information from internal databases Presentation layer automation software, increasingly used by business process outsourcers to displace human labour Interactive voice response (IVR) systems incorporating intelligent interaction with callers == Impact on employment == According to Harvard Business Review, most operations groups adopting RPA have promised their employees that automation would not result in layoffs. Instead, workers have been redeployed to do more interesting work. One academic study highlighted that knowledge workers did not feel threatened by automation: they embraced it and viewed the robots as team-mates. The same study highlighted that, rather than resulting in a lower "headcount", the technology was deployed in such a way as to achieve more work and greater productivity with the same number of people. Conversely, however, some analysts proffer that RPA represents a threat to the business process outsourcing (BPO) industry. The thesis behind this notion is that RPA will enable enterprises to "repatriate" processes from offshore locations into local data centers, with the benefit of this new technology. The effect, if true, will be to create high-value jobs for skilled process designers in onshore locations (and within the associated supply chain of IT hardware, data center management, etc.) but to decrease the available opportunity to low-skilled workers offshore. On the other hand, this discussion appears to be healthy ground for debate as another academic study was at pains to counter the so-called "myth" that RPA will bring back many jobs from offshore. === Impact on society === Academic studies project that RPA, among other technological trends, is expected to drive a new wave of productivity and efficiency gains in the global labour market. Although not directly attributable to RPA alone, Oxford University conjectures that up to 35% of all jobs might be automated by 2035. There are geographic implications to the trend in robotic automation. In the example above where an offshored process is "repatriated" under the control of the client organization (or even displaced by a business process outsourcer) from an offshore location to a data centre, the impact will be a deficit in economic activity to the offshore location and an economic benefit to the originating economy. On this basis, developed economies – with skills and technological infrastructure to develop and support a robotic automation capability – can be expected to achieve a net benefit from the trend. In a TEDx talk hosted by University College London (UCL), entrepreneur David Moss explains that digital labour in the form of RPA is likely to revolutionize the cost model of the services industry by driving the price of products and services down, while simultaneously improving the quality of outcomes and creating increased opportunity for the personalization of services. In a separate TEDx in 2019 talk, Japanese business executive, and former CIO of Barclays bank, Koichi Hasegawa noted that digital robots can be a positive effect on society if we start using a robot with empathy to help every person. He provides a case study of the Japanese insurance companies – Sompo Japan and Aioi – both of whom introduced bots to speed up the process of insurance pay-outs in past massive disaster incidents. Meanwhile, Professor Willcocks, author of the LSE paper cited above, speaks of increased job satisfaction and intellectual stimulation, characterising the technology as having the ability to "take the robot out of the human", a reference to the notion that robots will take over the mundane and repetitive portions of people's daily workload, leaving them to be used in more interpersonal roles or to concentrate on the remaining, more meaningful, portions of their day. It was also found in a 2021 study observing the effects of robotization in Europe that, the gender pay gap increased at a rate of .18% for every 1% increase in robotization of a given industry. == Unassisted RPA == Unassisted RPA, or RPAAI, is the next generation of RPA related technologies. Technological advancements around artificial intelligence allow a process to be run on a computer without needing input from a user. == Hyperautomation == Hyperautomation is the application of advanced technologies like RPA, artificial intelligence, machine learning (ML) and process mining to augment workers and automate processes in ways that are significantly more impactful than traditional automation capabilities. Hyperautomation is the combination of technologies that allow faster application authorship (like low-code and no-code) with automation technologies that coordinate different worker types (i.e. human and artificial) for intelligent and strategic workflow optimization. Gartner's report notes that this trend was kicked off with robotic process automation (RPA). The report notes that, "RPA alone is not hyperautomation. Hyperautomation requires a combination of tools to help support replicating pieces of where the human is involved in a task." == Outsourcing == Back office clerical processes outsourced by large organisations

  Read more →
• 

  KoalaPad

  The KoalaPad is a graphics tablet, released in 1983 by US company Koala Technologies Corporation, for the Apple II, TRS-80 Color Computer (as the TRS-80 Touch Pad), Atari 8-bit computers, Commodore 64, and IBM PC compatibles. Originally designed by Dr. David Thornburg as a low-cost computer drawing tool for schools, the Koala Pad and the bundled drawing program, KoalaPainter, was popular with home users as well. KoalaPainter was called KoalaPaint in some versions for the Apple II, and PC Design for the IBM PC. A program called Graphics Exhibitor was included for creating slideshow presentations from KoalaPainter drawings. == Description == The pad was four inches square (i.e. roughly 10×10 cm) and mounted on a slightly inclined base with the back of the pad higher than the front. At the top, "behind" the pad, were two buttons. The pad hooked into the computer using the analog signals of the joystick ports (the so-called paddle inputs), which meant that it had a low resolution and tended to jostle the cursor if moved during use. As an alternative to the drawing stylus, the pad could as easily be operated by the user's fingers for tasks that demanded less precision, such as selecting between menu items (thus using the pad as a kind of "indirect touch screen"). The top-mounted buttons tended to be somewhat frustrating to use, as the user had to "reach around" the stylus to push the buttons in order to start or stop drawing. A similar tablet from Atari, the Atari CX77 Touch Tablet, addressed this with a built-in button on the stylus, which some enterprising users adapted for use with their KoalaPad. == KoalaPainter == The pad shipped with a simple bitmap graphics editor developed by Audio Light called KoalaPainter, PC Design or Micro Illustrator depending on the target machine (see release history). Although bundled with the pad, KoalaPainter could also be operated using an ordinary digital joystick. One unique feature of the program, for its time, was that it held two pictures in the computer's memory, allowing the user to flip from one to the other—a function commonly used in order to study the differences between an original and a modified picture, and to copy and paste between two different pictures. Some third-party bitmap editors could also be used with the KoalaPad, such as Broderbund's Dazzle Draw for the Apple II. === Release history === KoalaPainter for Commodore 64 (1983) and Atari 8-bit computers (1983) PC Design for the IBM PC (1983) Micro Illustrator for the Apple II (1983), Atari 8-bit computers (1983) and Commodore Plus/4 (1984) KoalaPainter II for Commodore 64 (1984) === Reception === Ahoy! called KoalaPainter "a very powerful and effective color drawing package", and concluded that it and the KoalaPad were "excellent in ease of use, a fine choice for a beginner as well as young children". BYTE's reviewer stated in December 1984 that he made far fewer errors when using an Apple Mouse with MousePaint than with a KoalaPad and its software. He found that MousePaint was easier to use and more efficient, predicting that the mouse would receive more software support than the pad. Cassie Stahl in InfoWorld's Essential Guide to Atari Computers praised the tablet and its documentation, rating it "Excellent" among all categories and stating that "Playing with the KoalaPad becomes addictive. It does everything it claims to, and it does it well". She also liked Micro Illustrator, rating it "Excellent" except for "Good" for Performance. While criticizing the limited erase function, Stahl reported an undocumented feature enabling exporting pictures to other software. === File format === The Commodore 64 version of KoalaPainter used a fairly simple file format corresponding directly to the way bitmapped graphics are handled on the computer: A two-byte load address, followed immediately by 8,000 bytes of raw bitmap data, 1,000 bytes of raw "Video Matrix" data, 1,000 bytes of raw "Color RAM" data, and a one-byte Background Color field. == KoalaWare == Koala Technologies offered more software beyond the bundled KoalaPainter and Graphics Exhibitor for use with the pad. Among these applications, marketed under the moniker KoalaWare (like KoalaPainter itself), was educational software for use with customized keypads and overlays, such as spelling tools, music programs, and mathematics instruction software, as well as software for "translating" graphical designs into Logo programs.

  Read more →
• 

  Automated attendant

  In telephony, an automated attendant (also auto attendant, auto-attendant, autoattendant, automatic phone menus, AA, or virtual receptionist) allows callers to be automatically transferred to an extension without the intervention of an operator/receptionist. Many AAs will also offer a simple menu system ("for sales, press 1, for service, press 2," etc.). An auto attendant may also allow a caller to reach a live operator by dialing a number, usually "0". Typically the auto attendant is included in a business's phone system such as a PBX, but some services allow businesses to use an AA without such a system. Modern AA services (which now overlap with more complicated interactive voice response or IVR systems) can route calls to mobile phones, VoIP virtual phones, other AAs/IVRs, or other locations using traditional land-line phones or voice message machines. == Feature description == Telephone callers will recognize an automated attendant system as one that greets calls incoming to an organization with a recorded greeting of the form, "Thank you for calling .... If you know your party's extension, you may dial it any time during this message." Callers who have a touch-tone (DTMF) phone can dial an extension number or, in most cases, wait for operator ("attendant") assistance. Since the telephone network does not transmit the DC signals from rotary dial telephones (except for audible clicks), callers who have rotary dial phones have to wait for assistance. On a purely technical level it could be argued that an automated attendant is a very simple kind of IVR however, in the telecom industry the terms IVR and auto attendant are generally considered distinct. An automated attendant serves a very specific purpose (replace live operator and route calls), whereas an IVR can perform all sorts of functions (telephone banking, account inquiries, etc.). An AA will often include a directory which will allow a caller to dial by name in order to find a user on a system. There is no standard format to these directories, and they can use combinations of first name, last name, or both. The following lists common routing steps that are components of an automated attendant: Transfer to extension Transfer to voicemail Play message (i.e., "our address is ...") Go to a sub-menu Repeat choices In addition, an automated attendant would be expected to have values for the following: '0' – where to go when the caller dials '0' Timeout – what to do if the caller does nothing (usually go to the same place as '0') Default mailbox – where to send calls if '0' is not answered (or is not pointing to a live person) == Background == PBXs (private branch exchanges) or PABXs (private automatic branch exchanges) are telephone systems that serve an organization that has many telephone extensions but fewer telephone lines (sometimes called "trunks") that connect that organization to the rest of the global telecommunications network. While persons within an enterprise served by a PBX can call each other by dialing their extension numbers, incoming calls, i.e., calls originating from a telephone not served by the PBX but intended for a party served by the PBX, required assistance from a switchboard operator (also called a "switchboard attendant") or a telephone service called DID ("direct inward dialing"). Direct inward dialing has advantages such as rapid connection to the destination party and disadvantages including cost, lack of identification of the called organization and use of ten-digit telephone numbers. Automated attendants provide, among many other things, a way for an external caller to be directed to an extension or department served by a PBX system without using direct inward dialing or without switchboard attendant assistance. == History == Automated attendants are not part of voicemail systems. Voice messaging (or voicemail or VM) technology has existed since the late 1970s; in the early 1980s companies provided voice-prompting systems that allowed callers to reach (route the call) to an intended party, not necessarily to leave a message. Automated attendant systems are also referred to as automated menu systems and much early work in this field was done by Michael J. Freeman, Ph.D. == Time-based routing == Many auto attendants will have options to allow for time-of-day routing, as well as weekend and holiday routing. The specifics of these features will depend entirely on the particular automated attendant, but typically there would be a normal greeting and routing steps that would take place during normal business hours, and a different greeting and routing for non-business hours.

  Read more →
• 

  Voice user interface

  A voice user interface (VUI) enables spoken human interaction with computers, using speech recognition to understand spoken commands and answer questions, and typically text to speech to play a reply. A voice command device is a device controlled with a voice user interface. Voice user interfaces have been added to automobiles, home automation systems, computer operating systems, home appliances like washing machines and microwave ovens, and television remote controls. They are the primary way of interacting with virtual assistants on smartphones and smart speakers. Older automated attendants (which route phone calls to the correct extension) and interactive voice response systems (which conduct more complicated transactions over the phone) can respond to the pressing of keypad buttons via DTMF tones, but those with a full voice user interface allow callers to speak requests and responses without having to press any buttons. Newer voice command devices are speaker-independent, so they can respond to multiple voices, regardless of accent or dialectal influences. They are also capable of responding to several commands at once, separating vocal messages, and providing appropriate feedback, accurately imitating a natural conversation. == Overview == A VUI is the interface to any speech application. Only a short time ago, controlling a machine by simply talking to it was only possible in science fiction. Until recently, this area was considered to be artificial intelligence. However, advances in technologies like text-to-speech, speech-to-text, natural language processing, and cloud services contributed to the mass adoption of these types of interfaces. VUIs have become more commonplace, and people are taking advantage of the value that these hands-free, eyes-free interfaces provide in many situations. VUIs rely on the ability to process input reliably, inconsistent performance often leads to decreased user engagement and negative feedback. Designing a good VUI requires interdisciplinary talents of computer science, linguistics and human factors such as psychology. Even with advanced development tools, constructing an effective VUI requires understanding of both the tasks to be performed, as well as the target audience that will use the final system. The closer the VUI matches the user's mental model of the task, the easier it will be to use with little or no training, resulting in both higher efficiency and higher user satisfaction. A VUI designed for the general public should emphasize ease of use and provide a lot of help and guidance for first-time callers. In contrast, a VUI designed for a small group of power users (including field service workers), should focus more on productivity and less on help and guidance. Such applications should streamline the call flows, minimize prompts, eliminate unnecessary iterations and allow elaborate "mixed initiative dialogs", which enable callers to enter several pieces of information in a single utterance and in any order or combination. In short, speech applications have to be carefully crafted for the specific business process that is being automated. Not all business processes render themselves equally well for speech automation. In general, the more complex the inquiries and transactions are, the more challenging they will be to automate, and the more likely they will be to fail with the general public. In some scenarios, automation is simply not applicable, so live agent assistance is the only option. A legal advice hotline, for example, would be very difficult to automate. On the flip side, speech is perfect for handling quick and routine transactions, like changing the status of a work order, completing a time or expense entry, or transferring funds between accounts. == History == Early applications for VUI included voice-activated dialing of phones, either directly or through a (typically Bluetooth) headset or vehicle audio system. In 2007, a CNN business article reported that voice command was over a billion dollar industry and that companies like Google and Apple were trying to create speech recognition features. In the years since the article was published, the world has witnessed a variety of voice command devices. Additionally, Google has created a speech recognition engine called Pico TTS and Apple released Siri. Voice command devices are becoming more widely available, and innovative ways for using the human voice are always being created. For example, Business Week suggests that the future remote controller is going to be the human voice. Currently Xbox Live allows such features and Jobs hinted at such a feature on the new Apple TV. == Voice command software products on computing devices == Both Apple Mac and Windows PC provide built in speech recognition features for their latest operating systems. === Microsoft Windows === Two Microsoft operating systems, Windows 7 and Windows Vista, provide speech recognition capabilities. Microsoft integrated voice commands into their operating systems to provide a mechanism for people who want to limit their use of the mouse and keyboard, but still want to maintain or increase their overall productivity. ==== Windows Vista ==== With Windows Vista voice control, a user may dictate documents and emails in mainstream applications, start and switch between applications, control the operating system, format documents, save documents, edit files, efficiently correct errors, and fill out forms on the Web. The speech recognition software learns automatically every time a user uses it, and speech recognition is available in English (U.S.), English (U.K.), German (Germany), French (France), Spanish (Spain), Japanese, Chinese (Traditional), and Chinese (Simplified). In addition, the software comes with an interactive tutorial, which can be used to train both the user and the speech recognition engine. ==== Windows 7 ==== In addition to all the features provided in Windows Vista, Windows 7 provides a wizard for setting up the microphone and a tutorial on how to use the feature. ==== Mac OS X ==== All Mac OS X computers come pre-installed with the speech recognition software. The software is user-independent, and it allows for a user to, "navigate menus and enter keyboard shortcuts; speak checkbox names, radio button names, list items, and button names; and open, close, control, and switch among applications." However, the Apple website recommends a user buy a commercial product called Dictate. === Commercial products === If a user is not satisfied with the built in speech recognition software or a user does not have a built speech recognition software for their OS, then a user may experiment with a commercial product such as Braina Pro or DragonNaturallySpeaking for Windows PCs, and Dictate, the name of the same software for Mac OS. == Voice command mobile devices == Any mobile device running Android OS, Microsoft Windows Phone, iOS 9 or later, or Blackberry OS provides voice command capabilities. In addition to the built-in speech recognition software for each mobile phone's operating system, a user may download third party voice command applications from each operating system's application store: Apple App store, Google Play, Windows Phone Marketplace (initially Windows Marketplace for Mobile), or BlackBerry App World. === Android OS === Google has developed an open source operating system called Android, which allows a user to perform voice commands such as: send text messages, listen to music, get directions, call businesses, call contacts, send email, view a map, go to websites, write a note, and search Google. The speech recognition software is available for all devices since Android 2.2 "Froyo", but the settings must be set to English. Google allows for the user to change the language, and the user is prompted when he or she first uses the speech recognition feature if he or she would like their voice data to be attached to their Google account. If a user decides to opt into this service, it allows Google to train the software to the user's voice. Google introduced the Google Assistant with Android 7.0 "Nougat". It is much more advanced than the older version. Amazon.com has the Echo that uses Amazon's custom version of Android to provide a voice interface. === Microsoft Windows === Windows Phone is Microsoft's mobile device's operating system. On Windows Phone 7.5, the speech app is user independent and can be used to: call someone from your contact list, call any phone number, redial the last number, send a text message, call your voice mail, open an application, read appointments, query phone status, and search the web. In addition, speech can also be used during a phone call, and the following actions are possible during a phone call: press a number, turn the speaker phone on, or call someone, which puts the current call on hold. Windows 10 introduces Cortana, a voice control system that replaces the formerly used voice control on Windows

  Read more →
• 

  Cloem

  Cloem is a company based in Cannes, France, which applies natural language processing (NLP) technologies to assist patent applicants in creating variants of patent claims, called "cloems". According to the company, these "computer-generated claims can be published to keep potential competitors from attempting to file adjacent patent claims." == Technology == According to Cloem, dictionaries, ontologies and proprietary claim-drafting algorithms are used to draft alternative claims based on a client's original set of claims. In particular, the original set of claims is subject to various permutations and linguistic manipulations "by considering alternative definitions for terms as well as “synonyms, hyponyms, hyperonyms, meronyms, holonyms, and antonyms.”" == Possible uses == Cloem can optionally publish one or more created texts, as electronic publications or as paper-printed publications. These can potentially serve – through a defensive publication – as prior art to prevent another party for obtaining a patent on the subject-matter at stake. In other words, after an initial patent filing, an "improvement" patent (adjacent invention) can be applied for by another party, such as a competitor. By publishing variants of a patent claim, the risk of adverse patenting may potentially be decreased (improvement inventions may no longer be patentable). Cloems may also be potentially patentable. One of the issues of patentability, however, is that only a natural person can be a listed as an inventor on a patent. Since cloems are produced by a computer based on a person's input, it is not clear if the computer or the person is the inventor. The inventorship of Cloem texts is an open question.

  Read more →
• 

  Harmony (software)

  Harmony is a Java-based software for creating high-definition music videos with 2D and 3D animations. The application was developed by Digital Chaotics, a company based in San Jose, California and established in 2010 by Ken and Leanna Scott. == History == During a March 1, 2011 interview published by The LIST magazine, Ken explained how he initially got into music and digital entertainment. According to Scott: “I came at it from both the art and the technology side. … I built one of the first digital audio synthesizers as an undergrad project back in 1979. It was a short jump from there to creating visuals with computers, too.” Taking inspiration from Fantasia – which Scott calls, “The greatest music video of all time” – he began writing software code for Harmony in late 2009, finishing the project in mid-2010. However, Scott has also said that the idea for Harmony began much earlier: I read a book in 1978 called Digital Harmony, by John H Whitney, Sr. (Interestingly, he was the father of the president of Digital Productions.) He said that there was a kind of visual art based on motion, and proposed theories about the underlying mathematical structure of visual harmony. So there's the book, combined with my desire to create art with computers-add a taste or two of things commonly used by college students during the 70's - and lots of Pink Floyd. Add it all up, and the seeds for Harmony were planted. My friends in school and at Floating Point Systems listened to me ranting about "making music videos with computers" incessantly. I'm sure it was both maddening and fascinating to see. == Features == Harmony runs on Windows 7 and Windows Vista. Currently, Digital Chaotics does not offer a macOS or Linux platform for the software. However, Harmony can be run on these platforms by running it on Windows in a virtual machine. == Harmony 2 == On November 1, 2011, Digital Chaotics released the 2.0 version of the Harmony software. Unlike the original version, the second release featured three product levels: Harmony 2 Express, Harmony 2 Pro, and Harmony 2 Extreme. The "Express" version was positioned as an entry-level, free release to allow users a chance to "test-drive" the software. The "Pro" version currently retails at $197, while the "Extreme" is priced at $397. These two versions, aimed more towards VJ and Fulldome theater usage, featured additional software capability and features such as higher resolution, more video formatting options, and more camera angles.

  Read more →
• 

  VueScan

  VueScan is a computer program for image scanning, especially of photographs, including negatives. It supports optical character recognition (OCR) of text documents. The software can be downloaded and used free of charge, but adds a watermark on scans until a license is purchased. == Purpose == VueScan is intended to work with a large number of image scanners, excluding specialised professional scanners such as drum scanners, on many computer operating systems (OS), even if drivers for the scanner are not available for the OS. These scanners are supplied with device drivers and software to operate them, included in their price. A 2014 review considered that the reasons to purchase VueScan are to allow older scanners not supported by drivers for newer operating systems to be used in more up-to-date systems and for better scanning and processing of photographs (prints; also slides and negatives when supported by scanners) than is afforded by manufacturers' software. The review did not report any advantages to VueScan's processing of documents over other software. The reviewer considered VueScan comparable to SilverFast, a similar program, with support for some specific scanners better in one or the other. Vuescan supports more scanners, with a single purchase giving access to the full range of both film and flatbed scanners, and costs less. The VueScan program can be used with its own drivers or with drivers supplied by the scanner manufacturer, if supported by the operating system. VueScan drivers can also be used without the VueScan program by application software that supports scanning directly, such as Adobe Photoshop, again enabling the use of scanners without current manufacturers' drivers. In 2019 when Apple released macOS Catalina, they removed support for running 32-bit programs, including 32-bit drivers for scanning equipment. In response, Hamrick released VueScan 9.7, effectively saving thousands of scanners from being rendered obsolete. == Overview == VueScan enables the user to modify and fine-tune the scanning parameters. The program uses its own independent method to interface with scanner hardware, and can support many older scanners under computer operating systems for which drivers are not available, allowing old scanners to be used with newer platforms that do not otherwise support them. VueScan supports an increasing number of scanners and digital cameras; 2,400 on Windows, 2,100 on Mac OS X and 1,900 on Linux in 2018. VueScan is supplied as one downloadable file for each operating system, which supports the full range of scanners. Without the purchase of a license, the program runs in fully functional demonstration mode, identical to Professional mode, except that watermarks are superimposed on saved and printed images. Purchase of a license removes the watermark. A standard license allows updates for one year; a professional license allows unlimited updates and provides some additional features. VueScan supports optical character recognition (OCR), with English included, and 32 additional language packages available on its website. In September 2011, VueScan co-developer Ed Hamrick said that he was selling US$3 million per year of VueScan licenses.

  Read more →
• 

  AVS Video Editor

  AVS Video Editor is a video editing software published by Online Media Technologies Ltd. It is a part of AVS4YOU software suite which includes video, audio, image editing and conversion, disc editing and burning, document conversion and registry cleaner programs. It offers the opportunity to create and edit videos with a vast variety of video and audio effects, text and transitions; capture video from screen, web or DV cameras and VHS tape; record voice; create menus for discs, as well as to save them to plenty of video file formats, burn to discs or publish on Facebook, YouTube, Flickr, etc. == Description == === Interface === The layout consists of the timeline or storyboard view, preview pane and media library (transitions, video effects, text or disc menus) collections. The storyboard view shows the sequence of video clips with the transitions between them and used to change the order of clips or add transitions. Timeline view consists of main video, audio, effects, video overlay and text lines for editing. Once on the timeline video can be duplicated, split, muted, frozen, cropped, stabilized, its speed can be slowed down or increased, audio and color corrected. === Importing footage === Video, audio and image files necessary for video project can be imported into the program from computer hard disk drive. User can also capture video from computer screen, web or mini DV camera, as well as from VHS tape, record voice. === Output (web, device, disc, format) === AVS Video Editor gives the opportunity to save video to a computer hard drive to one of the video formats: AVI, DVD, Blu-ray, MOV, MP4, M4V, MPEG, WMV, MKV, WebM, M2TS, TS, FLV, SWF, RM, 3GP, GIF, DPG, AMV, MTV; burn to DVD or Blu-ray disc with menus; create a video for mobile players, mobile phones or gaming consoles and upload it right to the device. The most popular devices such as Apple iPod, Apple iPhone, Apple iPad, Sony PSP, Samsung Galaxy, Android and BlackBerry smartphones and tablets are supported. There is also an option to create a video that can be streamed via web and save it into Flash or WebM format or for the popular web services: YouTube, Facebook, Telly (Twitvid), Dailymotion, Flickr and Dropbox. === Features === Single and multithread modes: if a computer supports multi-threading, video creation process is performed faster in multithread mode, especially on a multi-core system. Customization of the output file settings, such as bitrate, frame rate, frame size, video and audio codecs, etc. Transitions - help video clips smoothly go into one another, dissolve or overlap two video or image files. Fade in and fade out video and audio files - dissolve a video to and from a blank image, reduce the audio volume at the end of the video and increase at the beginning. Slideshow creation - create a presentation of a series of still images. Voice recording Projects - once a project is created and saved, the next time saving video to some other format will be fast, projects are also used if a user do not have a possibility to create, edit and save video all at once. Video overlay option - superpose video image over the video clip that is being edited. Disk menu and chapters creation - an option for DVD and Blu-ray video. Freeze frame - make a still shot from a video clip. Stabilization feature - reduce jittering or blurring caused by shaky motions of a camera. Enhanced deinterlacing method - increase video quality for interlaced input file - spots and blurred areas are compensated. Scene detection - search and separate one scene of the video from the other. Loop DVD and SWF - output SWF and DVD video are played back continuously. Caching for processing high definition files - create a duplicate video file smaller in size to use it on the preview window and accelerate processing of HD files. Chroma key option - add video overlay half transparent so that only part of it is visible and all the rest disappears to reveal the video underneath. Capture video material from DV tapes, VHS tapes, web cameras, etc. Movie closing credits - add information on movie editing, e.g. crew, cast, data, etc. Creeping line, subtitles, text - add different captions (static and animated), shapes and images to video. Speech balloons and other graphic objects - geometrical shapes to highlight an object in the video. Zoom effect - magnify or reduce the view of the image. Rotate effect - rotate video image at different degrees, e.g. 90, 180, etc. Grayscale and old movie effects - create a black and white video image. Old movie adds also scratches, noise, shake and dust to video, as if it's being played on an old projector. Blur and sharpen effects - visually smooth and soften an image, or make video image better focused. Snow and particles effects - adds snow or various objects (bubbles, flowers, leaves, butterflies etc.) that are moving, flying or falling on the video. Pan and zoom Timer, countdown effects - add a timepiece that measures or counts down a time interval to the video being edited. Snapshots - capture a particular moment of a video clip. Sound track replacement - mute audio track from video and add another one. Audio amplify, noise removal, equalizer, etc. - make video sound louder, attenuate the noise, change frequency pattern of the audio, make some other audio adjustments. Trim and multi-trim options - change video clip duration cutting out unnecessary parts or detect scenes and cut out parts in any place of the video clip. Color correction (brightness, temperature, contrast, saturation, gamma, etc.) effects - allow adjustment of tonal range, color, and sharpness of video files. Crop scale effect - get rid of mattes that appear after changing aspect ratio of a video file. Adjusting the Playback Speed Volume and balance - change sound volume in the output video. Change volume value proportion for main video and added soundtrack, completely mute main video audio and leave added soundtrack only, etc. === Utilities embedded into AVS Video Editor === AVS Mobile Uploader is used to transfer edited and converted media files to portable devices via Bluetooth, Infrared or USB connection. AVS Video Burner is used to burn converted video files to different disc types: CD, DVD, Blu-ray. AVS Video Recorder is used to capture video from analog video sources and supports different types of devices: capture card, web camera (webcam), DV camera, HDV camera. AVS Video Uploader is used to transfer video files to popular video-sharing websites, like Facebook, Dailymotion, YouTube, Photobucket, TwitVid, MySpace, Flickr. AVS Screen Capture is used to capture any actions on the desktop to make presentations or video tutorials more vivid and easily comprehensible. == Important upgrades == The initial release of AVS Video Editor was in 2003 when the program was offered inside AVS software bundles together with AVS Video Tools, AVS Audio Tools and DVD Copy software. In 2005 the program is offered as a part of multifunctional AVS4YOU software suite. AVS Video Editor is frequently updated. The main updates include adding several important features for video editing

  Read more →
• 

  Instance selection

  Instance selection (or dataset reduction, or dataset condensation) is an important data pre-processing step that can be applied in many machine learning (or data mining) tasks. Approaches for instance selection can be applied for reducing the original dataset to a manageable volume, leading to a reduction of the computational resources that are necessary for performing the learning process. Algorithms of instance selection can also be applied for removing noisy instances, before applying learning algorithms. This step can improve the accuracy in classification problems. Algorithm for instance selection should identify a subset of the total available data to achieve the original purpose of the data mining (or machine learning) application as if the whole data had been used. Considering this, the optimal outcome of IS would be the minimum data subset that can accomplish the same task with no performance loss, in comparison with the performance achieved when the task is performed using the whole available data. Therefore, every instance selection strategy should deal with a trade-off between the reduction rate of the dataset and the classification quality. == Instance selection algorithms == The literature provides several different algorithms for instance selection. They can be distinguished from each other according to several different criteria. Considering this, instance selection algorithms can be grouped in two main classes, according to what instances they select: algorithms that preserve the instances at the boundaries of classes and algorithms that preserve the internal instances of the classes. Within the category of algorithms that select instances at the boundaries it is possible to cite DROP3, ICF and LSBo. On the other hand, within the category of algorithms that select internal instances, it is possible to mention ENN and LSSm. In general, algorithm such as ENN and LSSm are used for removing harmful (noisy) instances from the dataset. They do not reduce the data as the algorithms that select border instances, but they remove instances at the boundaries that have a negative impact on the data mining task. They can be used by other instance selection algorithms, as a filtering step. For example, the ENN algorithm is used by DROP3 as the first step, and the LSSm algorithm is used by LSBo. There is also another group of algorithms that adopt different selection criteria. For example, the algorithms LDIS, CDIS and XLDIS select the densest instances in a given arbitrary neighborhood. The selected instances can include both, border and internal instances. The LDIS and CDIS algorithms are very simple and select subsets that are very representative of the original dataset. Besides that, since they search by the representative instances in each class separately, they are faster (in terms of time complexity and effective running time) than other algorithms, such as DROP3 and ICF. Besides that, there is a third category of algorithms that, instead of selecting actual instances of the dataset, select prototypes (that can be synthetic instances). In this category it is possible to include PSSA, PSDSP and PSSP. The three algorithms adopt the notion of spatial partition (a hyperrectangle) for identifying similar instances and extract prototypes for each set of similar instances. In general, these approaches can also be modified for selecting actual instances of the datasets. The algorithm ISDSP adopts a similar approach for selecting actual instances (instead of prototypes).

  Read more →
• 

  Single particle analysis

  Single particle analysis is a group of related computerized image processing techniques used to analyze images from transmission electron microscopy (TEM). These methods were developed to improve and extend the information obtainable from TEM images of particulate samples, typically proteins or other large biological entities such as viruses. Individual images of stained or unstained particles are very noisy, making interpretation difficult. Combining several digitized images of similar particles together gives an image with stronger and more easily interpretable features. An extension of this technique uses single particle methods to build up a three-dimensional reconstruction of the particle. Using cryo-electron microscopy it has become possible to generate reconstructions with sub-nanometer, near-atomic resolution resolution first in the case of highly symmetric viruses, and now in smaller, asymmetric proteins as well. == Techniques == Single particle analysis can be done on both negatively stained and vitreous ice-embedded transmission electron cryomicroscopy (CryoTEM) samples. Single particle analysis methods are, in general, reliant on the sample being homogeneous, although techniques for dealing with conformational heterogeneity are being developed. Images (micrographs) are taken with an electron microscope using charged-coupled device (CCD) detectors coupled to a phosphorescent layer (in the past, they were instead collected on film and digitized using high-quality scanners). The image processing is carried out using specialized software programs, often run on multi-processor computer clusters. Depending on the sample or the desired results, various steps of two- or three-dimensional processing can be done. === Alignment and classification === Biological samples, and especially samples embedded in thin vitreous ice, are highly radiation sensitive, thus only low electron doses can be used to image the sample. This low dose, as well as variations in the metal stain used (if used) means images have high noise relative to the signal given by the particle being observed. By aligning several similar images to each other so they are in register and then averaging them, an image with higher signal-to-noise ratio can be obtained. As the noise is mostly randomly distributed and the underlying image features constant, by averaging the intensity of each pixel over several images only the constant features are reinforced. Typically, the optimal alignment (a translation and an in-plane rotation) to map one image onto another is calculated by cross-correlation. However, a micrograph often contains particles in multiple different orientations and/or conformations, and so to get more representative image averages, a method is required to group similar particle images together into multiple sets. This is normally carried out using one of several data analysis and image classification algorithms, such as multi-variate statistical analysis and hierarchical ascendant classification, or k-means clustering. Often data sets of tens of thousands of particle images are used, and to reach an optimal solution an iterative procedure of alignment and classification is used, whereby strong image averages produced by classification are used as reference images for a subsequent alignment of the whole data set. === Image filtering === Image filtering (band-pass filtering) is often used to reduce the influence of high and/or low spatial frequency information in the images, which can affect the results of the alignment and classification procedures. This is particularly useful in negative stain images. The algorithms make use of fast Fourier transforms (FFT), often employing Gaussian shaped soft-edged masks in reciprocal space to suppress certain frequency ranges. High-pass filters remove low spatial frequencies (such as ramp or gradient effects), leaving the higher frequencies intact. Low-pass filters remove high spatial frequency features and have a blurring effect on fine details. === Contrast transfer function === Due to the nature of image formation in the electron microscope, bright-field TEM images are obtained using significant underfocus. This, along with features inherent in the microscope's lens system, creates blurring of the collected images visible as a point spread function. The combined effects of the imaging conditions are known as the contrast transfer function (CTF), and can be approximated mathematically as a function in reciprocal space. Specialized image processing techniques such as phase flipping and amplitude correction / Wiener filtering can (at least partially) correct for the CTF, and allow high resolution reconstructions. === Three-dimensional reconstruction === Transmission electron microscopy images are projections of the object showing the distribution of density through the object, similar to medical X-rays. By making use of the projection-slice theorem a three-dimensional reconstruction of the object can be generated by combining many images (2D projections) of the object taken from a range of viewing angles. Proteins in vitreous ice ideally adopt a random distribution of orientations (or viewing angles), allowing a fairly isotropic reconstruction if a large number of particle images are used. This contrasts with electron tomography, where the viewing angles are limited due to the geometry of the sample/imaging set up, giving an anisotropic reconstruction. Filtered back projection is a commonly used method of generating 3D reconstructions in single particle analysis, although many alternative algorithms exist. Before a reconstruction can be made, the orientation of the object in each image needs to be estimated. Several methods have been developed to work out the relative Euler angles of each image. Some are based on common lines (common 1D projections and sinograms), others use iterative projection matching algorithms. The latter works by beginning with a simple, low resolution 3D starting model and compares the experimental images to projections of the model and creates a new 3D to bootstrap towards a solution. Methods are also available for making 3D reconstructions of helical samples (such as tobacco mosaic virus), taking advantage of the inherent helical symmetry. Both real space methods (treating sections of the helix as single particles) and reciprocal space methods (using diffraction patterns) can be used for these samples. === Tilt methods === The specimen stage of the microscope can be tilted (typically along a single axis), allowing the single particle technique known as random conical tilt. An area of the specimen is imaged at both zero and at high angle (~60-70 degrees) tilts, or in the case of the related method of orthogonal tilt reconstruction, +45 and −45 degrees. Pairs of particles corresponding to the same object at two different tilts (tilt pairs) are selected, and by following the parameters used in subsequent alignment and classification steps a three-dimensional reconstruction can be generated relatively easily. This is because the viewing angle (defined as three Euler angles) of each particle is known from the tilt geometry. 3D reconstructions from random conical tilt suffer from missing information resulting from a restricted range of orientations. Known as the missing cone (due to the shape in reciprocal space), this causes distortions in the 3D maps. However, the missing cone problem can often be overcome by combining several tilt reconstructions. Tilt methods are best suited to negatively stained samples, and can be used for particles that adsorb to the carbon support film in preferred orientations. The phenomenon known as charging or beam-induced movement makes collecting high-tilt images of samples in vitreous ice challenging. === Map visualization and fitting === Various software programs are available that allow viewing the 3D maps. These often enable the user to manually dock in protein coordinates (structures from X-ray crystallography, NMR, or a computational model such as one found in the AlphaFold Protein Structure Database) of subunits into the electron density. Several programs can also fit subunits computationally; as of the 2020s using these programs tend to produce better accuracy than manual docking because they can perform labor-intensive tasks such as: The scale of SPA-derived maps depends on knowing the pixel size (angstorms per pixel), which is not always accurate. Programs can automatically correct for this difference by using coordinate data or by using knowledge of chemical bonds. Many proteins are made up of several roughly rigid protein domains linked by flexible parts. Pre-existing coordinate data, whether experimental or computational, may not exactly match the inter-domain positioning of the cyro-EM map. Modern programs can automatically "chop" pre-existing coordinate data into individual domains and fit them in individually. For higher-resolution structures, it is pos

  Read more →
• 

  Figure AI

  Figure AI, Inc. is an American robotics company developing humanoid robots that operate via artificial intelligence. The company was founded in 2022 by Brett Adcock. As of late 2025, the company has a $39 billion valuation. Three generations of humanoid robots (Figure 01–03) have been developed, as well as two iterations of a vision-language-action model (Helix 01–02), which can control up to two robots at once. By 2026, the robots demonstrated the potential ability to perform household work and the company gained publicity when a Figure 03 appeared at a White House event. == History == Figure AI was founded in 2022 by Brett Adcock, also known for founding Archer Aviation and Vettery. That year, the company introduced its prototype, Figure 01, a bipedal robot designed for manual labor, initially targeting the logistics and warehousing sectors. The initial model utilized external cabling for easier maintenance. In May 2023, Figure AI raised $70 million from investors including Adcock, who invested $20 million, and Parkway Venture Capital. In January 2024, Figure AI announced a partnership with BMW to deploy humanoid robots in automotive manufacturing facilities. In February 2024, Figure AI secured $675 million in venture capital funding from a consortium that includes Jeff Bezos, Microsoft, Nvidia, Intel, and the startup-funding divisions of Amazon and OpenAI; the company was then valued at $2.6 billion. Figure AI also announced a partnership with OpenAI, which would build specialized artificial intelligence (AI) models for Figure AI's humanoid robots, enabling its robots to process language; the collaboration ended after a year, with Adcock stating that large language models had become a smaller problem compared to those allowing for "high rate robot control". In August 2024, the company introduced Figure 02, describing it as the next step toward deploying humanoids for industrial use. The machine has 35 degrees of freedom (DOF), while the five-fingered hands have 16 DOF and the ability to carry up to 25 kilograms (55 lb). The model is equipped with cabling integrated into the limbs, a torso-placed battery, six RGB cameras, and an onboard vision-language-action (VLA) model. It has three times the computing power (including inference AI) of the previous model, including two graphics processing units, supported by Nvidia. Microphones, speakers, and custom AI models (developed with OpenAI) enable communication with humans. In early 2025, Figure AI announced BotQ, a manufacturing facility aiming to produce 12,000 humanoids per year with the help of its own humanoid robots, and Helix, a VLA model that can control up to two robots at once. Helix enables a robot to interact with the world without extensive manual training, according to the company allowing it to pick up nearly any small household object. By April, the company issued cease-and-desist letters to at least two secondary brokers promoting its private stock without authorization. In September, a third round of financing exceeded $1 billion, raising the company's total valuation to $39 billion. Investors included Brookfield Asset Management, Intel, Macquarie Capital, Nvidia, Parkway Venture Capital, Qualcomm, Salesforce, and T-Mobile. In October 2025, Figure 03 was introduced. According to the company, its hardware and software redesign aims to create a general-purpose robot able to learn directly from humans. An upgraded camera system delivers twice the frame rate, a quarter the latency, and a 60% wider field of view, in addition to a camera in each hand. Tactile sensors in the fingertips can detect forces as little as 3 grams (0.1 oz). It incorporates soft materials and a protected battery for safety, and removable, washable textiles. It supports wireless inductive charging. In November 2025, the former head of product safety sued the company on the basis of being fired for raising the concern that the company's robots were strong enough to fracture a human skull. By early 2026, Figure 02 had been used in demonstrations showing that it could load a washing machine, sort packages, and fold laundry. That January, Helix 02 was released, expanding the AI model to the entire body to allow for functional autonomy. A Helix 02–powered Figure 02 was shown to be capable of loading and unloading a dishwasher, based on hours of motion-capture data and simulation-based machine learning. In March, U.S. First Lady Melania Trump appeared at the White House with a Figure 03, promoting the presumptive eventual ability of AI to teach children. In May 2026, Figure AI livestreamed a group of their robots processing packages nonstop for almost a week, inspiring a 10-hour competition between their robot and a human, in which the robot performed 98.5% as well as the human.

  Read more →