AI Assistant Card

AI Assistant Card — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Puck App

  Puck App is a mobile application that allows hockey players to quickly find and rent a hockey goalie. Founded in 2015 in Toronto, the application primarily operates throughout Canada. It is available on Apple's App Store and Google Play. == History == Puck App was founded in 2016 by Niki Sawni. Users can rate the goalies, message with available goalies, and coordinate skill levels. In 2017, Puck App expanded to Western Canada and has over 1,000 goalies registered. In 2018, Puck App charged approximately $40 CDN to rent a goalie with more than 2 hours notice. Previously, Puck App was a competitor to a similar application called GoalieUp. As of 2024, both companies have agreed to a merger deal.

  Read more →
• 

  Word2vec

  Word2vec is a technique in natural language processing for obtaining vector representations of words. These vectors capture information about the meaning of the word based on the surrounding words. The word2vec algorithm estimates these representations by modeling text in a large corpus. Once trained, such a model can detect synonymous words or suggest additional words for a partial sentence. Word2vec was developed by Tomáš Mikolov, Kai Chen, Greg Corrado, Ilya Sutskever and Jeff Dean at Google, and published in 2013. Word2vec represents a word as a high-dimension vector of numbers which capture relationships between words. In particular, words which appear in similar contexts are mapped to vectors which are nearby as measured by cosine similarity. This indicates the level of semantic similarity between the words, so for example the vectors for walk and ran are nearby, as are those for "but" and "however", and "Berlin" and "Germany". == Approach == Word2vec is a group of related models that are used to produce word embeddings. These models are shallow, two-layer neural networks that are trained to reconstruct linguistic contexts of words. Word2vec takes as its input a large corpus of text and produces a mapping of the set of words to a vector space, typically of several hundred dimensions, with each unique word in the corpus being assigned a vector in the space. Word2vec can use either of two model architectures to produce these distributed representations of words: continuous bag of words (CBOW) or continuously sliding skip-gram. In both architectures, word2vec considers both individual words and a sliding context window as it iterates over the corpus. The CBOW can be viewed as a 'fill in the blank' task, where the word embedding represents the way the word influences the relative probabilities of other words in the context window. Words which are semantically similar should influence these probabilities in similar ways, because semantically similar words should be used in similar contexts. The order of context words does not influence prediction (bag of words assumption). In the continuous skip-gram architecture, the model uses the current word to predict the surrounding window of context words. The skip-gram architecture weighs nearby context words more heavily than more distant context words. According to the authors' note, CBOW is faster while skip-gram does a better job for infrequent words. After the model is trained, the learned word embeddings are positioned in the vector space such that words that share common contexts in the corpus — that is, words that are semantically and syntactically similar — are located close to one another in the space. More dissimilar words are located farther from one another in the space. == Mathematical details == This section is based on expositions. A corpus is a sequence of words. Both CBOW and skip-gram are methods to learn one vector per word appearing in the corpus. Let V {\displaystyle V} ("vocabulary") be the set of all words appearing in the corpus C {\displaystyle C} . Our goal is to learn one vector v w ∈ R d {\displaystyle v_{w}\in \mathbb {R} ^{d}} for each word w ∈ V {\displaystyle w\in V} . The idea of skip-gram is that the vector of a word should be close to the vector of each of its neighbors. The idea of CBOW is that the vector-sum of a word's neighbors should be close to the vector of the word. === Continuous bag-of-words (CBOW) === The idea of CBOW is to represent each word with a vector, such that it is possible to predict a word using the sum of the vectors of its neighbors. Specifically, for each word w i {\displaystyle w_{i}} in the corpus, the one-hot encoding of the word is used as the input to the neural network. The output of the neural network is a probability distribution over the dictionary, representing a prediction of individual words in the neighborhood of w i {\displaystyle w_{i}} . The objective of training is to maximize ∑ i ln ⁡ Pr ( w i ∣ w i + j : j ∈ N ) {\displaystyle \sum _{i}\ln \Pr(w_{i}\mid w_{i+j}\colon j\in N)} where N {\displaystyle N} is a set of (non-zero) indices representing the relative locations of nearby words considered to be in w i {\displaystyle w_{i}} 's neighborhood. For example, if we want each word in the corpus to be predicted by every other word in a small span of 4 words. The set of relative indexes of neighbor words will be: N = { − 2 , − 1 , + 1 , + 2 } {\displaystyle N=\{-2,-1,+1,+2\}} , and the objective is to maximize ∑ i ln ⁡ Pr ( w i ∣ w i − 2 , w i − 1 , w i + 1 , w i + 2 ) {\displaystyle \sum _{i}\ln \Pr(w_{i}\mid w_{i-2},w_{i-1},w_{i+1},w_{i+2})} . In standard bag-of-words, a word's context is represented by a word-count (aka a word histogram) of its neighboring words. For example, the "sat" in "the cat sat on the mat" is represented as {"the": 2, "cat": 1, "on": 1}. Note that the last word "mat" is not used to represent "sat", because it is outside the neighborhood N = { − 2 , − 1 , + 1 , + 2 } {\displaystyle N=\{-2,-1,+1,+2\}} . In continuous bag-of-words, the histogram is multiplied by a matrix V {\displaystyle V} to obtain a continuous representation of the word's context. The matrix V {\displaystyle V} is also called a dictionary. Its columns are the word vectors. It has D {\displaystyle D} columns, where D {\displaystyle D} is the size of the dictionary. Let d {\displaystyle d} be the length of each word vector. We have V ∈ R d × D {\displaystyle V\in \mathbb {R} ^{d\times D}} . For example, multiplying the word histogram {"the": 2, "cat": 1, "on": 1} with V {\displaystyle V} , we obtain 2 v the + v cat + v on {\displaystyle 2v_{\text{the}}+v_{\text{cat}}+v_{\text{on}}} . This is then multiplied with another matrix V ′ {\displaystyle V'} of shape R D × d {\displaystyle \mathbb {R} ^{D\times d}} . Each row of it is a word vector v ′ {\displaystyle v'} . This results in a vector of length D {\displaystyle D} , one entry per dictionary entry. Then, apply the softmax to obtain a probability distribution over the dictionary. This system can be visualized as a neural network, similar in spirit to an autoencoder, of architecture linear-linear-softmax, as depicted in the diagram. The system is trained by gradient descent to minimize the cross-entropy loss. In full formula, the cross-entropy loss is: − ∑ i ln ⁡ e v w i ′ ⋅ ( ∑ j ∈ N v w j + i ) ∑ w ′ e v w ′ ′ ⋅ ( ∑ j ∈ N v w j + i ) {\displaystyle -\sum _{i}\ln {\frac {e^{v_{w_{i}}'\cdot (\sum _{j\in N}v_{w_{j+i}})}}{\sum _{w'}e^{v_{w'}'\cdot (\sum _{j\in N}v_{w_{j+i}})}}}} where the outer summation ∑ i {\displaystyle \sum _{i}} is over the words in a corpus, the quantity ∑ j ∈ N v w j + i {\displaystyle \sum _{j\in N}v_{w_{j+i}}} is the sum of a word's neighbors' vectors, etc. Once such a system is trained, we have two trained matrices V , V ′ {\displaystyle V,V'} . Either the column vectors of V {\displaystyle V} or the row vectors of V ′ {\displaystyle V'} can serve as the dictionary. For example, the word "sat" can be represented as either the "sat"-th column of V {\displaystyle V} or the "sat"-th row of V ′ {\displaystyle V'} . It is also possible to simply define V ′ = V ⊤ {\displaystyle V'=V^{\top }} , in which case there would no longer be a choice. === Skip-gram === The idea of skip-gram is to represent each word with a vector, such that it is possible to predict the vectors of its neighbors using the vector of a word. The architecture is still linear-linear-softmax, the same as CBOW, but the input and the output are switched. Specifically, for each word w i {\displaystyle w_{i}} in the corpus, the one-hot encoding of the word is used as the input to the neural network. The output of the neural network is a probability distribution over the dictionary, representing a prediction of individual words in the neighborhood of w i {\displaystyle w_{i}} . The objective of training is to maximize ∑ i ∑ j ∈ N ln ⁡ Pr ( w j + i ∣ w i ) {\displaystyle \sum _{i}\sum _{j\in N}\ln \Pr(w_{j+i}\mid w_{i})} . In full formula, the loss function is − ∑ i ∑ j ∈ N ln ⁡ e v w j + i ′ ⋅ v w i ∑ w ′ e v w ′ ′ ⋅ v w i {\displaystyle -\sum _{i}\sum _{j\in N}\ln {\frac {e^{v_{w_{j+i}}'\cdot v_{w_{i}}}}{\sum _{w'}e^{v_{w'}'\cdot v_{w_{i}}}}}} Same as CBOW, once such a system is trained, we have two trained matrices V , V ′ {\displaystyle V,V'} . Either the column vectors of V {\displaystyle V} or the row vectors of V ′ {\displaystyle V'} can serve as the dictionary. It is also possible to simply define V ′ = V ⊤ {\displaystyle V'=V^{\top }} , in which case there would no longer be a choice. Essentially, skip-gram and CBOW are exactly the same in architecture. They only differ in the objective function during training. == History == During the 1980s, there were some early attempts at using neural networks to represent words and concepts as vectors. In 2010, Tomáš Mikolov (then at Brno University of Technology) with co-authors applied a simple recurrent neural network with a single hidden

  Read more →
• 

  Ordination (statistics)

  Ordination or gradient analysis, in multivariate analysis, is a method complementary to data clustering, and used mainly in exploratory data analysis (rather than in hypothesis testing). In contrast to cluster analysis, ordination orders quantities in a (usually lower-dimensional) latent space. In the ordination space, quantities that are near each other share attributes (i.e., are similar to some degree), and dissimilar objects are farther from each other. Such relationships between the objects, on each of several axes or latent variables, are then characterized numerically and/or graphically in a biplot. The first ordination method, principal components analysis, was suggested by Karl Pearson in 1901. == Methods == Ordination methods can broadly be categorized in eigenvector-, algorithm-, or model-based methods. Many classical ordination techniques, including principal components analysis, correspondence analysis (CA) and its derivatives (detrended correspondence analysis, canonical correspondence analysis, and redundancy analysis, belong to the first group). The second group includes some distance-based methods such as non-metric multidimensional scaling, and machine learning methods such as T-distributed stochastic neighbor embedding and nonlinear dimensionality reduction. The third group includes model-based ordination methods, which can be considered as multivariate extensions of Generalized Linear Models. Model-based ordination methods are more flexible in their application than classical ordination methods, so that it is for example possible to include random-effects. Unlike in the aforementioned two groups, there is no (implicit or explicit) distance measure in the ordination. Instead, a distribution needs to be specified for the responses as is typical for statistical models. These and other assumptions, such as the assumed mean-variance relationship, can be validated with the use of residual diagnostics, unlike in other ordination methods. == Applications == Ordination can be used on the analysis of any set of multivariate objects. It is frequently used in several environmental or ecological sciences, particularly plant community ecology. It is also used in genetics and systems biology for microarray data analysis and in psychometrics.

  Read more →
• 

  Proximal policy optimization

  Proximal policy optimization (PPO) is a reinforcement learning (RL) algorithm for training an intelligent agent. Specifically, it is a policy gradient method, often used for deep RL when the policy network is very large. == History == The predecessor to PPO, Trust Region Policy Optimization (TRPO), was published in 2015. It addressed the instability issue of another algorithm, the Deep Q-Network (DQN), by using the trust region method to limit the KL divergence between the old and new policies. However, TRPO uses the Hessian matrix (a matrix of second derivatives) to enforce the trust region, but the Hessian is inefficient for large-scale problems. PPO was published in 2017. It was essentially an approximation of TRPO that does not require computing the Hessian. The KL divergence constraint was approximated by simply clipping the policy gradient. Since 2018, PPO was the default RL algorithm at OpenAI. PPO has been applied to many areas, such as controlling a robotic arm, beating professional players at Dota 2 (OpenAI Five), and playing Atari games. == TRPO == TRPO, the predecessor of PPO, is an on-policy algorithm. It can be used for environments with either discrete or continuous action spaces. The pseudocode is as follows: Input: initial policy parameters θ 0 {\textstyle \theta _{0}} , initial value function parameters ϕ 0 {\textstyle \phi _{0}} Hyperparameters: KL-divergence limit δ {\textstyle \delta } , backtracking coefficient α {\textstyle \alpha } , maximum number of backtracking steps K {\textstyle K} for k = 0 , 1 , 2 , … {\textstyle k=0,1,2,\ldots } do Collect set of trajectories D k = { τ i } {\textstyle {\mathcal {D}}_{k}=\left\{\tau _{i}\right\}} by running policy π k = π ( θ k ) {\textstyle \pi _{k}=\pi \left(\theta _{k}\right)} in the environment. Compute rewards-to-go R ^ t {\textstyle {\hat {R}}_{t}} . Compute advantage estimates, A ^ t {\textstyle {\hat {A}}_{t}} (using any method of advantage estimation) based on the current value function V ϕ k {\textstyle V_{\phi _{k}}} . Estimate policy gradient as g ^ k = 1 | D k | ∑ τ ∈ D k ∑ t = 0 T ∇ θ log ⁡ π θ ( a t ∣ s t ) | θ k A ^ t {\displaystyle {\hat {g}}_{k}=\left.{\frac {1}{\left|{\mathcal {D}}_{k}\right|}}\sum _{\tau \in {\mathcal {D}}_{k}}\sum _{t=0}^{T}\nabla _{\theta }\log \pi _{\theta }\left(a_{t}\mid s_{t}\right)\right|_{\theta _{k}}{\hat {A}}_{t}} Use the conjugate gradient algorithm to compute x ^ k ≈ H ^ k − 1 g ^ k {\displaystyle {\hat {x}}_{k}\approx {\hat {H}}_{k}^{-1}{\hat {g}}_{k}} where H ^ k {\textstyle {\hat {H}}_{k}} is the Hessian of the sample average KL-divergence. Update the policy by backtracking line search with θ k + 1 = θ k + α j 2 δ x ^ k T H ^ k x ^ k x ^ k {\displaystyle \theta _{k+1}=\theta _{k}+\alpha ^{j}{\sqrt {\frac {2\delta }{{\hat {x}}_{k}^{T}{\hat {H}}_{k}{\hat {x}}_{k}}}}{\hat {x}}_{k}} where j ∈ { 0 , 1 , 2 , … K } {\textstyle j\in \{0,1,2,\ldots K\}} is the smallest value which improves the sample loss and satisfies the sample KL-divergence constraint. Fit value function by regression on mean-squared error: ϕ k + 1 = arg ⁡ min ϕ 1 | D k | T ∑ τ ∈ D k ∑ t = 0 T ( V ϕ ( s t ) − R ^ t ) 2 {\displaystyle \phi _{k+1}=\arg \min _{\phi }{\frac {1}{\left|{\mathcal {D}}_{k}\right|T}}\sum _{\tau \in {\mathcal {D}}_{k}}\sum _{t=0}^{T}\left(V_{\phi }\left(s_{t}\right)-{\hat {R}}_{t}\right)^{2}} typically via some gradient descent algorithm. == PPO == The pseudocode is as follows: Input: initial policy parameters θ 0 {\textstyle \theta _{0}} , initial value function parameters ϕ 0 {\textstyle \phi _{0}} for k = 0 , 1 , 2 , … {\textstyle k=0,1,2,\ldots } do Collect set of trajectories D k = { τ i } {\textstyle {\mathcal {D}}_{k}=\left\{\tau _{i}\right\}} by running policy π k = π ( θ k ) {\textstyle \pi _{k}=\pi \left(\theta _{k}\right)} in the environment. Compute rewards-to-go R ^ t {\textstyle {\hat {R}}_{t}} . Compute advantage estimates, A ^ t {\textstyle {\hat {A}}_{t}} (using any method of advantage estimation) based on the current value function V ϕ k {\textstyle V_{\phi _{k}}} . Update the policy by maximizing the PPO-Clip objective: θ k + 1 = arg ⁡ max θ 1 | D k | T ∑ τ ∈ D k ∑ t = 0 T min ( π θ ( a t ∣ s t ) π θ k ( a t ∣ s t ) A π θ k ( s t , a t ) , g ( ϵ , A π θ k ( s t , a t ) ) ) {\displaystyle \theta _{k+1}=\arg \max _{\theta }{\frac {1}{\left|{\mathcal {D}}_{k}\right|T}}\sum _{\tau \in {\mathcal {D}}_{k}}\sum _{t=0}^{T}\min \left({\frac {\pi _{\theta }\left(a_{t}\mid s_{t}\right)}{\pi _{\theta _{k}}\left(a_{t}\mid s_{t}\right)}}A^{\pi _{\theta _{k}}}\left(s_{t},a_{t}\right),\quad g\left(\epsilon ,A^{\pi _{\theta _{k}}}\left(s_{t},a_{t}\right)\right)\right)} typically via stochastic gradient ascent with Adam. Fit value function by regression on mean-squared error: ϕ k + 1 = arg ⁡ min ϕ 1 | D k | T ∑ τ ∈ D k ∑ t = 0 T ( V ϕ ( s t ) − R ^ t ) 2 {\displaystyle \phi _{k+1}=\arg \min _{\phi }{\frac {1}{\left|{\mathcal {D}}_{k}\right|T}}\sum _{\tau \in {\mathcal {D}}_{k}}\sum _{t=0}^{T}\left(V_{\phi }\left(s_{t}\right)-{\hat {R}}_{t}\right)^{2}} typically via some gradient descent algorithm. Like all policy gradient methods, PPO is used for training an RL agent whose actions are determined by a differentiable policy function by gradient ascent. Intuitively, a policy gradient method takes small policy update steps, so the agent can reach higher and higher rewards in expectation. Policy gradient methods may be unstable: A step size that is too big may direct the policy in a suboptimal direction, thus having little possibility of recovery; a step size that is too small lowers the overall efficiency. To solve the instability, PPO implements a clip function that constrains the policy update of an agent from being too large, so that larger step sizes may be used without negatively affecting the gradient ascent process. === Basic concepts === To begin the PPO training process, the agent is set in an environment to perform actions based on its current input. In the early phase of training, the agent can freely explore solutions and keep track of the result. Later, with a certain amount of transition samples and policy updates, the agent will select an action to take by randomly sampling from the probability distribution P ( A | S ) {\displaystyle P(A|S)} generated by the policy network. The actions that are most likely to be beneficial will have the highest probability of being selected from the random sample. After an agent arrives at a different scenario (a new state) by acting, it is rewarded with a positive reward or a negative reward. The objective of an agent is to maximize the cumulative reward signal across sequences of states, known as episodes. === Policy gradient laws: the advantage function === The advantage function (denoted as A {\displaystyle A} ) is central to PPO, as it tries to answer the question of whether a specific action of the agent is better or worse than some other possible action in a given state. By definition, the advantage function is an estimate of the relative value for a selected action. If the output of this function is positive, it means that the action in question is better than the average return, so the possibilities of selecting that specific action will increase. The opposite is true for a negative advantage output. The advantage function can be defined as A = Q − V {\displaystyle A=Q-V} , where Q {\displaystyle Q} is the discounted sum of rewards (the total weighted reward for the completion of an episode) and V {\displaystyle V} is the baseline estimate. Since the advantage function is calculated after the completion of an episode, the program records the outcome of the episode. Therefore, calculating advantage is essentially an unsupervised learning problem. The baseline estimate comes from the value function that outputs the expected discounted sum of an episode starting from the current state. In the PPO algorithm, the baseline estimate will be noisy (with some variance), as it also uses a neural network, like the policy function itself. With Q {\displaystyle Q} and V {\displaystyle V} computed, the advantage function is calculated by subtracting the baseline estimate from the actual discounted return. If A > 0 {\displaystyle A>0} , the actual return of the action is better than the expected return from experience; if A < 0 {\displaystyle A<0} , the actual return is worse. === Ratio function === In PPO, the ratio function ( r t {\displaystyle r_{t}} ) calculates the probability of selecting action a {\displaystyle a} in state s {\displaystyle s} given the current policy network, divided by the previous probability under the old policy. In other words: If r t ( θ ) > 1 {\displaystyle r_{t}(\theta )>1} , where θ {\displaystyle \theta } are the policy network parameters, then selecting action a {\displaystyle a} in state s {\displaystyle s} is more likely based on the current policy than the previous policy. If 0 ≤ r t ( θ ) < 1 {\displaystyle 0\leq r_{t}(\theta )<1} , then selecting actio

  Read more →
• 

  Lexalytics

  Lexalytics, Inc. provides sentiment and intent analysis to an array of companies using SaaS and cloud based technology. Salience 6, the engine behind Lexalytics, was built as an on-premises, multi-lingual text analysis engine. It is leased to other companies who use it to power filtering and reputation management programs. In July, 2015 Lexalytics acquired Semantria to be used as a cloud option for its technology. In September, 2021 Lexalytics was acquired by CX company InMoment. == History == Lexalytics spun into existence in January 2003 out of a content management startup called Lightspeed. Lightspeed consolidated on America's West Coast. Jeff Catlin, a Lightspeed General Manager, and Mike Marshall, a Lighstpeed Principal Engineer, convinced investors to give them the East Coast company so as to avoid shutdown costs. Catlin and Marshall renamed the operation Lexalytics. Catlin took on the role of chief executive officer with Marshall working as Chief Technology Officer. Lexalytics opted to not accept venture cash. Instead, the company initially shared sales and marketing expenses with U.K. based document management company Infonic. The partner companies soon formed a joint venture in July 2008, which was later dissolved. Since then, Lexalytics has worked with many other companies, like Bottlenose, Salesforce, Thomson Reuters, Oracle and DataSift. Relationships with social media monitoring companies like Datasift tend to find Lexalytics’ Salience engine baked into the product itself. Lexalytics is used similarly to monitor sentiment as it relates to stock trading. In December 2014, Lexalytics announced the latest iteration to its sentiment analysis engine, Salience 6. Earlier that year Lexalytics acquired Semantria in a bid to appeal to a wider variety of business models. Created by former Lexalytics Marketing Director Oleg Rogynskyy, Semantria is a SaaS text mining service offered as an API and Excel based plugin that measures sentiment. The goal of the acquisition, which cost Lexalytics less than US$10 million, was to expand the customer base both within the United States and abroad with multilingual support. The engine that powers Semantria, Salience, is grounded in its deep learning ability. An example of this is its concept matrix, which allows Salience an understanding of concepts and relationship between concepts based on a detailed reading of the entire repository of Wikipedia. This matrix allows Salience to use Wikipedia for automatic categorization. Along with features like the concept matrix, Salience supports 16 international languages. The engine has earned Lexalytics a spot on EContent's “Top 100 Companies in the Digital Content Industry” List for 2014–2015. In September 2018, Lexalytics launched document data extraction market using natural language processing (NLP).

  Read more →
• 

  Evolutionary programming

  Evolutionary programming is an evolutionary algorithm, where a share of new population is created by mutation of previous population without crossover. Evolutionary programming differs from evolution strategy ES( μ + λ {\displaystyle \mu +\lambda } ) in one detail. All individuals are selected for the new population, while in ES( μ + λ {\displaystyle \mu +\lambda } ), every individual has the same probability to be selected. It is one of the four major evolutionary algorithm paradigms. == History == It was first used by Lawrence J. Fogel in the US in 1960 in order to use simulated evolution as a learning process aiming to generate artificial intelligence. It was used to evolve finite-state machines as predictors.

  Read more →
• 

  Genetic representation

  In computer programming, genetic representation is a way of presenting solutions/individuals in evolutionary computation methods. The term encompasses both the concrete data structures and data types used to realize the genetic material of the candidate solutions in the form of a genome, and the relationships between search space and problem space. In the simplest case, the search space corresponds to the problem space (direct representation). The choice of problem representation is tied to the choice of genetic operators, both of which have a decisive effect on the efficiency of the optimization. Genetic representation can encode appearance, behavior, physical qualities of individuals. Difference in genetic representations is one of the major criteria drawing a line between known classes of evolutionary computation. Terminology is often analogous with natural genetics. The block of computer memory that represents one candidate solution is called an individual. The data in that block is called a chromosome. Each chromosome consists of genes. The possible values of a particular gene are called alleles. A programmer may represent all the individuals of a population using binary encoding, permutational encoding, encoding by tree, or any one of several other representations. == Representations in some popular evolutionary algorithms == Genetic algorithms (GAs) are typically linear representations; these are often, but not always, binary. Holland's original description of GA used arrays of bits. Arrays of other types and structures can be used in essentially the same way. The main property that makes these genetic representations convenient is that their parts are easily aligned due to their fixed size. This facilitates simple crossover operation. Depending on the application, variable-length representations have also been successfully used and tested in evolutionary algorithms (EA) in general and genetic algorithms in particular, although the implementation of crossover is more complex in this case. Evolution strategy uses linear real-valued representations, e.g., an array of real values. It uses mostly gaussian mutation and blending/averaging crossover. Genetic programming (GP) pioneered tree-like representations and developed genetic operators suitable for such representations. Tree-like representations are used in GP to represent and evolve functional programs with desired properties. Human-based genetic algorithm (HBGA) offers a way to avoid solving hard representation problems by outsourcing all genetic operators to outside agents, in this case, humans. The algorithm has no need for knowledge of a particular fixed genetic representation as long as there are enough external agents capable of handling those representations, allowing for free-form and evolving genetic representations. === Common genetic representations === binary array integer or real-valued array binary tree natural language parse tree directed graph == Distinction between search space and problem space == Analogous to biology, EAs distinguish between problem space (corresponds to phenotype) and search space (corresponds to genotype). The problem space contains concrete solutions to the problem being addressed, while the search space contains the encoded solutions. The mapping from search space to problem space is called genotype-phenotype mapping. The genetic operators are applied to elements of the search space, and for evaluation, elements of the search space are mapped to elements of the problem space via genotype-phenotype mapping. == Relationships between search space and problem space == The importance of an appropriate choice of search space for the success of an EA application was recognized early on. The following requirements can be placed on a suitable search space and thus on a suitable genotype-phenotype mapping: === Completeness === All possible admissible solutions must be contained in the search space. === Redundancy === When more possible genotypes exist than phenotypes, the genetic representation of the EA is called redundant. In nature, this is termed a degenerate genetic code. In the case of a redundant representation, neutral mutations are possible. These are mutations that change the genotype but do not affect the phenotype. Thus, depending on the use of the genetic operators, there may be phenotypically unchanged offspring, which can lead to unnecessary fitness determinations, among other things. Since the evaluation in real-world applications usually accounts for the lion's share of the computation time, it can slow down the optimization process. In addition, this can cause the population to have higher genotypic diversity than phenotypic diversity, which can also hinder evolutionary progress. In biology, the Neutral Theory of Molecular Evolution states that this effect plays a dominant role in natural evolution. This has motivated researchers in the EA community to examine whether neutral mutations can improve EA functioning by giving populations that have converged to a local optimum a way to escape that local optimum through genetic drift. This is discussed controversially and there are no conclusive results on neutrality in EAs. On the other hand, there are other proven measures to handle premature convergence. === Locality === The locality of a genetic representation corresponds to the degree to which distances in the search space are preserved in the problem space after genotype-phenotype mapping. That is, a representation has a high locality exactly when neighbors in the search space are also neighbors in the problem space. In order for successful schemata not to be destroyed by genotype-phenotype mapping after a minor mutation, the locality of a representation must be high. === Scaling === In genotype-phenotype mapping, the elements of the genotype can be scaled (weighted) differently. The simplest case is uniform scaling: all elements of the genotype are equally weighted in the phenotype. A common scaling is exponential. If integers are binary coded, the individual digits of the resulting binary number have exponentially different weights in representing the phenotype. Example: The number 90 is written in binary (i.e., in base two) as 1011010. If now one of the front digits is changed in the binary notation, this has a significantly greater effect on the coded number than any changes at the rear digits (the selection pressure has an exponentially greater effect on the front digits). For this reason, exponential scaling has the effect of randomly fixing the "posterior" locations in the genotype before the population gets close enough to the optimum to adjust for these subtleties. == Hybridization and repair in genotype-phenotype mapping == When mapping the genotype to the phenotype being evaluated, domain-specific knowledge can be used to improve the phenotype and/or ensure that constraints are met. This is a commonly used method to improve EA performance in terms of runtime and solution quality. It is illustrated below by two of the three examples. == Examples == === Example of a direct representation === An obvious and commonly used encoding for the traveling salesman problem and related tasks is to number the cities to be visited consecutively and store them as integers in the chromosome. The genetic operators must be suitably adapted so that they only change the order of the cities (genes) and do not cause deletions or duplications. Thus, the gene order corresponds to the city order and there is a simple one-to-one mapping. === Example of a complex genotype-phenotype mapping === In a scheduling task with heterogeneous and partially alternative resources to be assigned to a set of subtasks, the genome must contain all necessary information for the individual scheduling operations or it must be possible to derive them from it. In addition to the order of the subtasks to be executed, this includes information about the resource selection. A phenotype then consists of a list of subtasks with their start times and assigned resources. In order to be able to create this, as many allocation matrices must be created as resources can be allocated to one subtask at most. In the simplest case this is one resource, e.g., one machine, which can perform the subtask. An allocation matrix is a two-dimensional matrix, with one dimension being the available time units and the other being the resources to be allocated. Empty matrix cells indicate availability, while an entry indicates the number of the assigned subtask. The creation of allocation matrices ensures firstly that there are no inadmissible multiple allocations. Secondly, the start times of the subtasks can be read from it as well as the assigned resources. A common constraint when scheduling resources to subtasks is that a resource can only be allocated once per time unit and that the reservation must be for a contiguous period of time. To achieve this in a timely manner, which is a c

  Read more →
• 

  Sliced inverse regression

  Sliced inverse regression (SIR) is a tool for dimensionality reduction in the field of multivariate statistics. In statistics, regression analysis is a method of studying the relationship between a response variable y and its input variable x _ {\displaystyle {\underline {x}}} , which is a p-dimensional vector. There are several approaches in the category of regression. For example, parametric methods include multiple linear regression, and non-parametric methods include local smoothing. As the number of observations needed to use local smoothing methods scales exponentially with high-dimensional data (as p grows), reducing the number of dimensions can make the operation computable. Dimensionality reduction aims to achieve this by showing only the most important dimension of the data. SIR uses the inverse regression curve, E ( x _ | y ) {\displaystyle E({\underline {x}}\,|\,y)} , to perform a weighted principal component analysis. == Model == Given a response variable Y {\displaystyle \,Y} and a (random) vector X ∈ R p {\displaystyle X\in \mathbb {R} ^{p}} of explanatory variables, SIR is based on the model Y = f ( β 1 ⊤ X , … , β k ⊤ X , ε ) ( 1 ) {\displaystyle Y=f(\beta _{1}^{\top }X,\ldots ,\beta _{k}^{\top }X,\varepsilon )\quad \quad \quad \quad \quad (1)} where β 1 , … , β k {\displaystyle \beta _{1},\ldots ,\beta _{k}} are unknown projection vectors, k {\displaystyle \,k} is an unknown number smaller than p {\displaystyle \,p} , f {\displaystyle \;f} is an unknown function on R k + 1 {\displaystyle \mathbb {R} ^{k+1}} as it only depends on k {\displaystyle \,k} arguments, and ε {\displaystyle \varepsilon } is a random variable representing error with E [ ε | X ] = 0 {\displaystyle E[\varepsilon |X]=0} and a finite variance of σ 2 {\displaystyle \sigma ^{2}} . The model describes an ideal solution, where Y {\displaystyle \,Y} depends on X ∈ R p {\displaystyle X\in \mathbb {R} ^{p}} only through a k {\displaystyle \,k} dimensional subspace; i.e., one can reduce the dimension of the explanatory variables from p {\displaystyle \,p} to a smaller number k {\displaystyle \,k} without losing any information. An equivalent version of ( 1 ) {\displaystyle \,(1)} is: the conditional distribution of Y {\displaystyle \,Y} given X {\displaystyle \,X} depends on X {\displaystyle \,X} only through the k {\displaystyle \,k} dimensional random vector ( β 1 ⊤ X , … , β k ⊤ X ) {\displaystyle (\beta _{1}^{\top }X,\ldots ,\beta _{k}^{\top }X)} . It is assumed that this reduced vector is as informative as the original X {\displaystyle \,X} in explaining Y {\displaystyle \,Y} . The unknown β i ′ s {\displaystyle \,\beta _{i}'s} are called the effective dimension reducing directions (EDR-directions). The space that is spanned by these vectors is denoted by the effective dimension reducing space (EDR-space). == Relevant linear algebra background == Given a _ 1 , … , a _ r ∈ R n {\displaystyle {\underline {a}}_{1},\ldots ,{\underline {a}}_{r}\in \mathbb {R} ^{n}} , then V := L ( a _ 1 , … , a _ r ) {\displaystyle V:=L({\underline {a}}_{1},\ldots ,{\underline {a}}_{r})} , the set of all linear combinations of these vectors is called a linear subspace and is therefore a vector space. The equation says that vectors a _ 1 , … , a _ r {\displaystyle {\underline {a}}_{1},\ldots ,{\underline {a}}_{r}} span V {\displaystyle \,V} , but the vectors that span space V {\displaystyle \,V} are not unique. The dimension of V ( ∈ R n ) {\displaystyle \,V(\in \mathbb {R} ^{n})} is equal to the maximum number of linearly independent vectors in V {\displaystyle \,V} . A set of n {\displaystyle \,n} linear independent vectors of R n {\displaystyle \mathbb {R} ^{n}} makes up a basis of R n {\displaystyle \mathbb {R} ^{n}} . The dimension of a vector space is unique, but the basis itself is not. Several bases can span the same space. Dependent vectors can still span a space, but the linear combinations of the latter are only suitable to a set of vectors lying on a straight line. == Inverse regression == Computing the inverse regression curve (IR) means instead of looking for E [ Y | X = x ] {\displaystyle \,E[Y|X=x]} , which is a curve in R p {\displaystyle \mathbb {R} ^{p}} it is actually E [ X | Y = y ] {\displaystyle \,E[X|Y=y]} , which is also a curve in R p {\displaystyle \mathbb {R} ^{p}} , but consisting of p {\displaystyle \,p} one-dimensional regressions. The center of the inverse regression curve is located at E [ E [ X | Y ] ] = E [ X ] {\displaystyle \,E[E[X|Y]]=E[X]} . Therefore, the centered inverse regression curve is E [ X | Y = y ] − E [ X ] {\displaystyle \,E[X|Y=y]-E[X]} which is a p {\displaystyle \,p} dimensional curve in R p {\displaystyle \mathbb {R} ^{p}} . == Inverse regression versus dimension reduction == The centered inverse regression curve lies on a k {\displaystyle \,k} -dimensional subspace spanned by Σ x x β i ′ s {\displaystyle \,\Sigma _{xx}\beta _{i}\,'s} . This is a connection between the model and inverse regression. Given this condition and ( 1 ) {\displaystyle \,(1)} , the centered inverse regression curve E [ X | Y = y ] − E [ X ] {\displaystyle \,E[X|Y=y]-E[X]} is contained in the linear subspace spanned by Σ x x β k ( k = 1 , … , K ) {\displaystyle \,\Sigma _{xx}\beta _{k}(k=1,\ldots ,K)} , where Σ x x = C o v ( X ) {\displaystyle \,\Sigma _{xx}=Cov(X)} . == Estimation of the EDR-directions == After having had a look at all the theoretical properties, the aim now is to estimate the EDR-directions. For that purpose, weighted principal component analyses are needed. If the sample means m ^ h ′ s {\displaystyle \,{\hat {m}}_{h}\,'s} , X {\displaystyle \,X} would have been standardized to Z = Σ x x − 1 / 2 { X − E ( X ) } {\displaystyle \,Z=\Sigma _{xx}^{-1/2}\{X-E(X)\}} . Corresponding to the theorem above, the IR-curve m 1 ( y ) = E [ Z | Y = y ] {\displaystyle \,m_{1}(y)=E[Z|Y=y]} lies in the space spanned by ( η 1 , … , η k ) {\displaystyle \,(\eta _{1},\ldots ,\eta _{k})} , where η i = Σ x x 1 / 2 β i {\displaystyle \,\eta _{i}=\Sigma _{xx}^{1/2}\beta _{i}} . As a consequence, the covariance matrix c o v [ E [ Z | Y ] ] {\displaystyle \,cov[E[Z|Y]]} is degenerate in any direction orthogonal to the η i ′ s {\displaystyle \,\eta _{i}\,'s} . Therefore, the eigenvectors η k ( k = 1 , … , K ) {\displaystyle \,\eta _{k}(k=1,\ldots ,K)} associated with the largest K {\displaystyle \,K} eigenvalues are the standardized EDR-directions. == Algorithm == === SIR algorithm === The algorithm from Li, K-C. (1991) to estimate the EDR-directions via SIR is as follows. 1. Let Σ x x {\displaystyle \,\Sigma _{xx}} be the covariance matrix of X {\displaystyle \,X} . Standardize X {\displaystyle \,X} to Z = Σ x x − 1 / 2 { X − E ( X ) } {\displaystyle \,Z=\Sigma _{xx}^{-1/2}\{X-E(X)\}} ( 1 ) {\displaystyle \,(1)} can also be rewritten as Y = f ( η 1 ⊤ Z , … , η k ⊤ Z , ε ) {\displaystyle Y=f(\eta _{1}^{\top }Z,\ldots ,\eta _{k}^{\top }Z,\varepsilon )} where η k = β k Σ x x 1 / 2 ∀ k {\displaystyle \,\eta _{k}=\beta _{k}\Sigma _{xx}^{1/2}\quad \forall \;k} .) 2. Divide the range of y i {\displaystyle \,y_{i}} into S {\displaystyle \,S} non-overlapping slices H s ( s = 1 , … , S ) . n s {\displaystyle \,H_{s}(s=1,\ldots ,S).\;n_{s}} is the number of observations within each slice and I H s {\displaystyle \,I_{H_{s}}} is the indicator function for the slice: n s = ∑ i = 1 n I H s ( y i ) {\displaystyle n_{s}=\sum _{i=1}^{n}I_{H_{s}}(y_{i})} 3. Compute the mean of z i {\displaystyle \,z_{i}} over all slices, which is a crude estimate m ^ 1 {\displaystyle \,{\hat {m}}_{1}} of the inverse regression curve m 1 {\displaystyle \,m_{1}} : z ¯ s = n s − 1 ∑ i = 1 n z i I H s ( y i ) {\displaystyle \,{\bar {z}}_{s}=n_{s}^{-1}\sum _{i=1}^{n}z_{i}I_{H_{s}}(y_{i})} 4. Calculate the estimate for C o v { m 1 ( y ) } {\displaystyle \,Cov\{m_{1}(y)\}} : V ^ = n − 1 ∑ i = 1 S n s z ¯ s z ¯ s ⊤ {\displaystyle \,{\hat {V}}=n^{-1}\sum _{i=1}^{S}n_{s}{\bar {z}}_{s}{\bar {z}}_{s}^{\top }} 5. Identify the eigenvalues λ ^ i {\displaystyle \,{\hat {\lambda }}_{i}} and the eigenvectors η ^ i {\displaystyle \,{\hat {\eta }}_{i}} of V ^ {\displaystyle \,{\hat {V}}} , which are the standardized EDR-directions. 6. Transform the standardized EDR-directions back to the original scale. The estimates for the EDR-directions are given by: β ^ i = Σ ^ x x − 1 / 2 η ^ i {\displaystyle \,{\hat {\beta }}_{i}={\hat {\Sigma }}_{xx}^{-1/2}{\hat {\eta }}_{i}} (which are not necessarily orthogonal.)

  Read more →
• 

  Neighborhood operation

  In computer vision and image processing a neighborhood operation is a commonly used class of computations on image data which implies that it is processed according to the following pseudo code: Visit each point p in the image data and do { N = a neighborhood or region of the image data around the point p result(p) = f(N) } This general procedure can be applied to image data of arbitrary dimensionality. Also, the image data on which the operation is applied does not have to be defined in terms of intensity or color, it can be any type of information which is organized as a function of spatial (and possibly temporal) variables in p. The result of applying a neighborhood operation on an image is again something which can be interpreted as an image, it has the same dimension as the original data. The value at each image point, however, does not have to be directly related to intensity or color. Instead it is an element in the range of the function f, which can be of arbitrary type. Normally the neighborhood N is of fixed size and is a square (or a cube, depending on the dimensionality of the image data) centered on the point p. Also the function f is fixed, but may in some cases have parameters which can vary with p, see below. In the simplest case, the neighborhood N may be only a single point. This type of operation is often referred to as a point-wise operation. == Examples == The most common examples of a neighborhood operation use a fixed function f which in addition is linear, that is, the computation consists of a linear shift invariant operation. In this case, the neighborhood operation corresponds to the convolution operation. A typical example is convolution with a low-pass filter, where the result can be interpreted in terms of local averages of the image data around each image point. Other examples are computation of local derivatives of the image data. It is also rather common to use a fixed but non-linear function f. This includes median filtering, and computation of local variances. The Nagao-Matsuyama filter is an example of a complex local neighbourhood operation that uses variance as an indicator of the uniformity within a pixel group. The result is similar to a convolution with a low-pass filter with the added effect of preserving sharp edges. There is also a class of neighborhood operations in which the function f has additional parameters which can vary with p: Visit each point p in the image data and do { N = a neighborhood or region of the image data around the point p result(p) = f(N, parameters(p)) } This implies that the result is not shift invariant. Examples are adaptive Wiener filters. == Implementation aspects == The pseudo code given above suggests that a neighborhood operation is implemented in terms of an outer loop over all image points. However, since the results are independent, the image points can be visited in arbitrary order, or can even be processed in parallel. Furthermore, in the case of linear shift-invariant operations, the computation of f at each point implies a summation of products between the image data and the filter coefficients. The implementation of this neighborhood operation can then be made by having the summation loop outside the loop over all image points. An important issue related to neighborhood operation is how to deal with the fact that the neighborhood N becomes more or less undefined for points p close to the edge or border of the image data. Several strategies have been proposed: Compute result only for points p for which the corresponding neighborhood is well-defined. This implies that the output image will be somewhat smaller than the input image. Zero padding: Extend the input image sufficiently by adding extra points outside the original image which are set to zero. The loops over the image points described above visit only the original image points. Border extension: Extend the input image sufficiently by adding extra points outside the original image which are set to the image value at the closest image point. The loops over the image points described above visit only the original image points. Mirror extension: Extend the image sufficiently much by mirroring the image at the image boundaries. This method is less sensitive to local variations at the image boundary than border extension. Wrapping: The image is tiled, so that going off one edge wraps around to the opposite side of the image. This method assumes that the image is largely homogeneous, for example a stochastic image texture without large textons.

  Read more →
• 

  Mixture model

  In statistics, a mixture model is a probabilistic model for representing the presence of subpopulations within an overall population, without requiring that an observed data set should identify the sub-population to which an individual observation belongs. Formally a mixture model corresponds to the mixture distribution that represents the probability distribution of observations in the overall population. However, while problems associated with "mixture distributions" relate to deriving the properties of the overall population from those of the sub-populations, "mixture models" are used to make statistical inferences about the properties of the sub-populations given only observations on the pooled population, without sub-population identity information. Mixture models are used for clustering, under the name model-based clustering, and also for density estimation. Mixture models should not be confused with models for compositional data, i.e., data whose components are constrained to sum to a constant value (1, 100%, etc.). However, compositional models can be thought of as mixture models, where members of the population are sampled at random. Conversely, mixture models can be thought of as compositional models, where the total size reading population has been normalized to 1. == Structure == === General mixture model === A typical finite-dimensional mixture model is a hierarchical model consisting of the following components: N random variables that are observed, each distributed according to a mixture of K components, with the components belonging to the same parametric family of distributions (e.g., all normal, all Zipfian, etc.) but with different parameters. However, it is also possible to have a finite mixture model where each component belongs to a different parametric family of distributions, for example, a mixture of a multivariate normal distribution and a generalized hyperbolic distribution. N random latent variables specifying the identity of the mixture component of each observation, each distributed according to a K-dimensional categorical distribution A set of K mixture weights, which are probabilities that sum to 1. A set of K parameters, each specifying the parameter of the corresponding mixture component. In many cases, each "parameter" is actually a set of parameters. For example, if the mixture components are Gaussian distributions, there will be a mean and variance for each component. If the mixture components are categorical distributions (e.g., when each observation is a token from a finite alphabet of size V), there will be a vector of V probabilities summing to 1. In addition, in a Bayesian setting, the mixture weights and parameters will themselves be random variables, and prior distributions will be placed over the variables. In such a case, the weights are typically viewed as a K-dimensional random vector drawn from a Dirichlet distribution (the conjugate prior of the categorical distribution), and the parameters will be distributed according to their respective conjugate priors. Mathematically, a basic parametric mixture model can be described as follows: K = number of mixture components N = number of observations θ i = 1 … K = parameter of distribution of observation associated with component i ϕ i = 1 … K = mixture weight, i.e., prior probability of a particular component i ϕ = K -dimensional vector composed of all the individual ϕ 1 … K ; must sum to 1 z i = 1 … N = component of observation i x i = 1 … N = observation i F ( x | θ ) = probability distribution of an observation, parametrized on θ z i = 1 … N ∼ Categorical ⁡ ( ϕ ) x i = 1 … N | z i = 1 … N ∼ F ( θ z i ) {\displaystyle {\begin{array}{lcl}K&=&{\text{number of mixture components}}\\N&=&{\text{number of observations}}\\\theta _{i=1\dots K}&=&{\text{parameter of distribution of observation associated with component }}i\\\phi _{i=1\dots K}&=&{\text{mixture weight, i.e., prior probability of a particular component }}i\\{\boldsymbol {\phi }}&=&K{\text{-dimensional vector composed of all the individual }}\phi _{1\dots K}{\text{; must sum to 1}}\\z_{i=1\dots N}&=&{\text{component of observation }}i\\x_{i=1\dots N}&=&{\text{observation }}i\\F(x|\theta )&=&{\text{probability distribution of an observation, parametrized on }}\theta \\z_{i=1\dots N}&\sim &\operatorname {Categorical} ({\boldsymbol {\phi }})\\x_{i=1\dots N}|z_{i=1\dots N}&\sim &F(\theta _{z_{i}})\end{array}}} In a Bayesian setting, all parameters are associated with random variables, as follows: K , N = as above θ i = 1 … K , ϕ i = 1 … K , ϕ = as above z i = 1 … N , x i = 1 … N , F ( x | θ ) = as above α = shared hyperparameter for component parameters β = shared hyperparameter for mixture weights H ( θ | α ) = prior probability distribution of component parameters, parametrized on α θ i = 1 … K ∼ H ( θ | α ) ϕ ∼ S y m m e t r i c - D i r i c h l e t K ⁡ ( β ) z i = 1 … N | ϕ ∼ Categorical ⁡ ( ϕ ) x i = 1 … N | z i = 1 … N , θ i = 1 … K ∼ F ( θ z i ) {\displaystyle {\begin{array}{lcl}K,N&=&{\text{as above}}\\\theta _{i=1\dots K},\phi _{i=1\dots K},{\boldsymbol {\phi }}&=&{\text{as above}}\\z_{i=1\dots N},x_{i=1\dots N},F(x|\theta )&=&{\text{as above}}\\\alpha &=&{\text{shared hyperparameter for component parameters}}\\\beta &=&{\text{shared hyperparameter for mixture weights}}\\H(\theta |\alpha )&=&{\text{prior probability distribution of component parameters, parametrized on }}\alpha \\\theta _{i=1\dots K}&\sim &H(\theta |\alpha )\\{\boldsymbol {\phi }}&\sim &\operatorname {Symmetric-Dirichlet} _{K}(\beta )\\z_{i=1\dots N}|{\boldsymbol {\phi }}&\sim &\operatorname {Categorical} ({\boldsymbol {\phi }})\\x_{i=1\dots N}|z_{i=1\dots N},\theta _{i=1\dots K}&\sim &F(\theta _{z_{i}})\end{array}}} This characterization uses F and H to describe arbitrary distributions over observations and parameters, respectively. Typically H will be the conjugate prior of F. The two most common choices of F are Gaussian aka "normal" (for real-valued observations) and categorical (for discrete observations). Other common possibilities for the distribution of the mixture components are: Binomial distribution, for the number of "positive occurrences" (e.g., successes, yes votes, etc.) given a fixed number of total occurrences Multinomial distribution, similar to the binomial distribution, but for counts of multi-way occurrences (e.g., yes/no/maybe in a survey) Negative binomial distribution, for binomial-type observations but where the quantity of interest is the number of failures before a given number of successes occurs Poisson distribution, for the number of occurrences of an event in a given period of time, for an event that is characterized by a fixed rate of occurrence Exponential distribution, for the time before the next event occurs, for an event that is characterized by a fixed rate of occurrence Log-normal distribution, for positive real numbers that are assumed to grow exponentially, such as incomes or prices Multivariate normal distribution (aka multivariate Gaussian distribution), for vectors of correlated outcomes that are individually Gaussian-distributed Multivariate Student's t-distribution, for vectors of heavy-tailed correlated outcomes A vector of Bernoulli-distributed values, corresponding, e.g., to a black-and-white image, with each value representing a pixel; see the handwriting-recognition example below === Specific examples === ==== Gaussian mixture model ==== A typical non-Bayesian Gaussian mixture model looks like this: K , N = as above ϕ i = 1 … K , ϕ = as above z i = 1 … N , x i = 1 … N = as above θ i = 1 … K = { μ i = 1 … K , σ i = 1 … K 2 } μ i = 1 … K = mean of component i σ i = 1 … K 2 = variance of component i z i = 1 … N ∼ Categorical ⁡ ( ϕ ) x i = 1 … N ∼ N ( μ z i , σ z i 2 ) {\displaystyle {\begin{array}{lcl}K,N&=&{\text{as above}}\\\phi _{i=1\dots K},{\boldsymbol {\phi }}&=&{\text{as above}}\\z_{i=1\dots N},x_{i=1\dots N}&=&{\text{as above}}\\\theta _{i=1\dots K}&=&\{\mu _{i=1\dots K},\sigma _{i=1\dots K}^{2}\}\\\mu _{i=1\dots K}&=&{\text{mean of component }}i\\\sigma _{i=1\dots K}^{2}&=&{\text{variance of component }}i\\z_{i=1\dots N}&\sim &\operatorname {Categorical} ({\boldsymbol {\phi }})\\x_{i=1\dots N}&\sim &{\mathcal {N}}(\mu _{z_{i}},\sigma _{z_{i}}^{2})\end{array}}} A Bayesian version of a Gaussian mixture model is as follows: K , N = as above ϕ i = 1 … K , ϕ = as above z i = 1 … N , x i = 1 … N = as above θ i = 1 … K = { μ i = 1 … K , σ i = 1 … K 2 } μ i = 1 … K = mean of component i σ i = 1 … K 2 = variance of component i μ 0 , λ , ν , σ 0 2 = shared hyperparameters μ i = 1 … K ∼ N ( μ 0 , λ σ i 2 ) σ i = 1 … K 2 ∼ I n v e r s e - G a m m a ⁡ ( ν , σ 0 2 ) ϕ ∼ S y m m e t r i c - D i r i c h l e t K ⁡ ( β ) z i = 1 … N ∼ Categorical ⁡ ( ϕ ) x i = 1 … N ∼ N ( μ z i , σ z i 2 ) {\displaystyle {\begin{array}{lcl}K,N&=&{\text{as above}}\\\phi _{i=1\dots K},{\boldsymbol {\phi }}&=&{\text{as above}}\\z_{i=1\dots N},x_{i=1\dots N}&=&{\text{as above}}\\\theta _{i=1\

  Read more →
• 

  Witness set

  In combinatorics and computational learning theory, a witness set is a set of elements that distinguishes a given Boolean function from a given class of other Boolean functions. Let C {\displaystyle C} be a concept class over a domain X {\displaystyle X} (that is, a family of Boolean functions over X {\displaystyle X} ) and c {\displaystyle c} be a concept in X {\displaystyle X} (a single Boolean function). A subset S {\displaystyle S} of X {\displaystyle X} is a witness set for c {\displaystyle c} in X {\displaystyle X} if S {\displaystyle S} distinguishes c {\displaystyle c} from all the other functions in C {\displaystyle C} , in the sense that no other function in C {\displaystyle C} has the same values on S {\displaystyle S} . For a concept class with | C | {\displaystyle |C|} concepts, there exists a concept that has a witness of size at most log 2 ⁡ | C | {\displaystyle \log _{2}|C|} ; this bound is tight when C {\displaystyle C} consists of all Boolean functions over X {\displaystyle X} . By a result of Bondy (1972) there exists a single witness set of size at most | C | − 1 {\displaystyle |C|-1} that is valid for all concepts in C {\displaystyle C} ; this bound is tight when C {\displaystyle C} consists of the indicator functions of the empty set and some singleton sets. One way to construct this set is to interpret the concepts as bitstrings, and the domain elements as positions in these bitstrings. Then the set of positions at which a trie of the bitstrings branches forms the desired witness set. This construction is central to the operation of the fusion tree data structure. The minimum size of a witness set for c {\displaystyle c} is called the witness size or specification number and is denoted by w C ( c ) {\displaystyle w_{C}(c)} . The value max { w C ( c ) : c ∈ C } {\displaystyle \max\{w_{C}(c):c\in C\}} is called the teaching dimension of C {\displaystyle C} . It represents the number of examples of a concept that need to be presented by a teacher to a learner, in the worst case, to enable the learner to determine which concept is being presented. Witness sets have also been called teaching sets, keys, specifying sets, or discriminants. The "witness set" terminology is from Kushilevitz et al. (1996), who trace the concept of witness sets to work by Cover (1965).

  Read more →
• 

  Feature selection

  In machine learning, feature selection is the process of selecting a subset of relevant features (variables, predictors) for use in model construction. Feature selection techniques are used for several reasons: simplification of models to make them easier to interpret, shorter training times, to avoid the curse of dimensionality, improve the compatibility of the data with a certain learning model class, to encode inherent symmetries present in the input space. The central premise when using feature selection is that data sometimes contains features that are redundant or irrelevant, and can thus be removed without incurring much loss of information. Redundancy and irrelevance are two distinct notions, since one relevant feature may be redundant in the presence of another relevant feature with which it is strongly correlated. Feature extraction creates new features from functions of the original features, whereas feature selection finds a subset of the features. Feature selection techniques are often used in domains where there are many features and comparatively few samples (data points). == Introduction == A feature selection algorithm can be seen as the combination of a search technique for proposing new feature subsets, along with an evaluation measure which scores the different feature subsets. The simplest algorithm is to test each possible subset of features finding the one which minimizes the error rate. This is an exhaustive search of the space, and is computationally intractable for all but the smallest of feature sets. The choice of evaluation metric heavily influences the algorithm, and it is these evaluation metrics which distinguish between the three main categories of feature selection algorithms: wrappers, filters and embedded methods. Wrapper methods use a predictive model to score feature subsets. Each new subset is used to train a model, which is tested on a hold-out set. Counting the number of mistakes made on that hold-out set (the error rate of the model) gives the score for that subset. As wrapper methods train a new model for each subset, they are very computationally intensive, but usually provide the best performing feature set for that particular type of model or typical problem. Filter methods use a proxy measure instead of the error rate to score a feature subset. This measure is chosen to be fast to compute, while still capturing the usefulness of the feature set. Common measures include the mutual information, the pointwise mutual information, Pearson product-moment correlation coefficient, Relief-based algorithms, and inter/intra class distance or the scores of significance tests for each class/feature combinations. Filters are usually less computationally intensive than wrappers, but they produce a feature set which is not tuned to a specific type of predictive model. This lack of tuning means a feature set from a filter is more general than the set from a wrapper, usually giving lower prediction performance than a wrapper. However the feature set doesn't contain the assumptions of a prediction model, and so is more useful for exposing the relationships between the features. Many filters provide a feature ranking rather than an explicit best feature subset, and the cut off point in the ranking is chosen via cross-validation. Filter methods have also been used as a preprocessing step for wrapper methods, allowing a wrapper to be used on larger problems. One other popular approach is the Recursive Feature Elimination algorithm, commonly used with Support Vector Machines to repeatedly construct a model and remove features with low weights. Embedded methods are a catch-all group of techniques which perform feature selection as part of the model construction process. The exemplar of this approach is the LASSO method for constructing a linear model, which penalizes the regression coefficients with an L1 penalty, shrinking many of them to zero. Any features which have non-zero regression coefficients are 'selected' by the LASSO algorithm. Improvements to the LASSO include Bolasso which bootstraps samples; Elastic net regularization, which combines the L1 penalty of LASSO with the L2 penalty of ridge regression; and FeaLect which scores all the features based on combinatorial analysis of regression coefficients. AEFS further extends LASSO to nonlinear scenario with autoencoders. These approaches tend to be between filters and wrappers in terms of computational complexity. In traditional regression analysis, the most popular form of feature selection is stepwise regression, which is a wrapper technique. It is a greedy algorithm that adds the best feature (or deletes the worst feature) at each round. The main control issue is deciding when to stop the algorithm. In machine learning, this is typically done by cross-validation. In statistics, some criteria are optimized. This leads to the inherent problem of nesting. More robust methods have been explored, such as branch and bound and piecewise linear network. == Subset selection == Subset selection evaluates a subset of features as a group for suitability. Subset selection algorithms can be broken up into wrappers, filters, and embedded methods. Wrappers use a search algorithm to search through the space of possible features and evaluate each subset by running a model on the subset. Wrappers can be computationally expensive and have a risk of over fitting to the model. Filters are similar to wrappers in the search approach, but instead of evaluating against a model, a simpler filter is evaluated. Embedded techniques are embedded in, and specific to, a model. Many popular search approaches use greedy hill climbing, which iteratively evaluates a candidate subset of features, then modifies the subset and evaluates if the new subset is an improvement over the old. Evaluation of the subsets requires a scoring metric that grades a subset of features. Exhaustive search is generally impractical, so at some implementor (or operator) defined stopping point, the subset of features with the highest score discovered up to that point is selected as the satisfactory feature subset. The stopping criterion varies by algorithm; possible criteria include: a subset score exceeds a threshold, a program's maximum allowed run time has been surpassed, etc. Alternative search-based techniques are based on targeted projection pursuit which finds low-dimensional projections of the data that score highly: the features that have the largest projections in the lower-dimensional space are then selected. Search approaches include: Exhaustive Best first Simulated annealing Genetic algorithm Greedy forward selection Greedy backward elimination Particle swarm optimization Targeted projection pursuit Scatter search Variable neighborhood search Two popular filter metrics for classification problems are correlation and mutual information, although neither are true metrics or 'distance measures' in the mathematical sense, since they fail to obey the triangle inequality and thus do not compute any actual 'distance' – they should rather be regarded as 'scores'. These scores are computed between a candidate feature (or set of features) and the desired output category. There are, however, true metrics that are a simple function of the mutual information; see here. Other available filter metrics include: Class separability Error probability Inter-class distance Probabilistic distance Entropy Consistency-based feature selection Correlation-based feature selection == Optimality criteria == The choice of optimality criteria is difficult as there are multiple objectives in a feature selection task. Many common criteria incorporate a measure of accuracy, penalised by the number of features selected. Examples include Akaike information criterion (AIC) and Mallows's Cp, which have a penalty of 2 for each added feature. AIC is based on information theory, and is effectively derived via the maximum entropy principle. Other criteria are Bayesian information criterion (BIC), which uses a penalty of log ⁡ n {\displaystyle {\sqrt {\log {n}}}} for each added feature, minimum description length (MDL) which asymptotically uses log ⁡ n {\displaystyle {\sqrt {\log {n}}}} , Bonferroni / RIC which use 2 log ⁡ p {\displaystyle {\sqrt {2\log {p}}}} , maximum dependency feature selection, and a variety of new criteria that are motivated by false discovery rate (FDR), which use something close to 2 log ⁡ p q {\displaystyle {\sqrt {2\log {\frac {p}{q}}}}} . A maximum entropy rate criterion may also be used to select the most relevant subset of features. == Structure learning == Filter feature selection is a specific case of a more general paradigm called structure learning. Feature selection finds the relevant feature set for a specific target variable whereas structure learning finds the relationships between all the variables, usually by expressing these relationships as a graph. The most common structure learning algorithms

  Read more →
• 

  SemEval

  SemEval (Semantic Evaluation) is an ongoing series of evaluations of computational semantic analysis systems; it evolved from the Senseval word sense evaluation series. The evaluations are intended to explore the nature of meaning in language. While meaning is intuitive to humans, transferring those intuitions to computational analysis has proved elusive. This series of evaluations provides a mechanism to characterize in more precise terms exactly what is necessary to compute in meaning. As such, the evaluations provide an emergent mechanism to identify the problems and solutions for computations with meaning. These exercises have evolved to articulate more of the dimensions that are involved in our use of language. They began with apparently simple attempts to identify word senses computationally. They have evolved to investigate the interrelationships among the elements in a sentence (e.g., semantic role labeling), relations between sentences (e.g., coreference), and the nature of what we are saying (semantic relations and sentiment analysis). The purpose of the SemEval and Senseval exercises is to evaluate semantic analysis systems. "Semantic Analysis" refers to a formal analysis of meaning, and "computational" refer to approaches that in principle support effective implementation. The first three evaluations, Senseval-1 through Senseval-3, were focused on word sense disambiguation (WSD), each time growing in the number of languages offered in the tasks and in the number of participating teams. Beginning with the fourth workshop, SemEval-2007 (SemEval-1), the nature of the tasks evolved to include semantic analysis tasks outside of word sense disambiguation. Triggered by the conception of the SEM conference, the SemEval community had decided to hold the evaluation workshops yearly in association with the SEM conference. It was also the decision that not every evaluation task will be run every year, e.g. none of the WSD tasks were included in the SemEval-2012 workshop. == History == === Early evaluation of algorithms for word sense disambiguation === From the earliest days, assessing the quality of word sense disambiguation algorithms had been primarily a matter of intrinsic evaluation, and “almost no attempts had been made to evaluate embedded WSD components”. Only very recently (2006) had extrinsic evaluations begun to provide some evidence for the value of WSD in end-user applications. Until 1990 or so, discussions of the sense disambiguation task focused mainly on illustrative examples rather than comprehensive evaluation. The early 1990s saw the beginnings of more systematic and rigorous intrinsic evaluations, including more formal experimentation on small sets of ambiguous words. === Senseval to SemEval === In April 1997, Martha Palmer and Marc Light organized a workshop entitled Tagging with Lexical Semantics: Why, What, and How? in conjunction with the Conference on Applied Natural Language Processing. At the time, there was a clear recognition that manually annotated corpora had revolutionized other areas of NLP, such as part-of-speech tagging and parsing, and that corpus-driven approaches had the potential to revolutionize automatic semantic analysis as well. Kilgarriff recalled that there was "a high degree of consensus that the field needed evaluation", and several practical proposals by Resnik and Yarowsky kicked off a discussion that led to the creation of the Senseval evaluation exercises. === SemEval's 3, 2 or 1 year(s) cycle === After SemEval-2010, many participants feel that the 3-year cycle is a long wait. Many other shared tasks such as Conference on Natural Language Learning (CoNLL) and Recognizing Textual Entailments (RTE) run annually. For this reason, the SemEval coordinators gave the opportunity for task organizers to choose between a 2-year or a 3-year cycle. The SemEval community favored the 3-year cycle. Although the votes within the SemEval community favored a 3-year cycle, organizers and coordinators had settled to split the SemEval task into 2 evaluation workshops. This was triggered by the introduction of the new SEM conference. The SemEval organizers thought it would be appropriate to associate our event with the SEM conference and collocate the SemEval workshop with the SEM conference. The organizers got very positive responses (from the task coordinators/organizers and participants) about the association with the yearly SEM, and 8 tasks were willing to switch to 2012. Thus was born SemEval-2012 and SemEval-2013. The current plan is to switch to a yearly SemEval schedule to associate it with the SEM conference but not every task needs to run every year. ==== List of Senseval and SemEval Workshops ==== Senseval-1 took place in the summer of 1998 for English, French, and Italian, culminating in a workshop held at Herstmonceux Castle, Sussex, England on September 2–4. Senseval-2 took place in the summer of 2001, and was followed by a workshop held in July 2001 in Toulouse, in conjunction with ACL 2001. Senseval-2 included tasks for Basque, Chinese, Czech, Danish, Dutch, English, Estonian, Italian, Japanese, Korean, Spanish and Swedish. Senseval-3 took place in March–April 2004, followed by a workshop held in July 2004 in Barcelona, in conjunction with ACL 2004. Senseval-3 included 14 different tasks for core word sense disambiguation, as well as identification of semantic roles, multilingual annotations, logic forms, subcategorization acquisition. SemEval-2007 (Senseval-4) took place in 2007, followed by a workshop held in conjunction with ACL in Prague. SemEval-2007 included 18 different tasks targeting the evaluation of systems for the semantic analysis of text. A special issue of Language Resources and Evaluation is devoted to the result. SemEval-2010 took place in 2010, followed by a workshop held in conjunction with ACL in Uppsala. SemEval-2010 included 18 different tasks targeting the evaluation of semantic analysis systems. SemEval-2012 took place in 2012; it was associated with the new SEM, First Joint Conference on Lexical and Computational Semantics, and co-located with NAACL, Montreal, Canada. SemEval-2012 included 8 different tasks targeting at evaluating computational semantic systems. However, there was no WSD task involved in SemEval-2012, the WSD related tasks were scheduled in the upcoming SemEval-2013. SemEval-2013 was associated with NAACL 2013, North American Association of Computational Linguistics, Georgia, USA and took place in 2013. It included 13 different tasks targeting at evaluating computational semantic systems. SemEval-2014 took place in 2014. It was co-located with COLING 2014, 25th International Conference on Computational Linguistics and SEM 2014, Second Joint Conference on Lexical and Computational Semantics, Dublin, Ireland. There were 10 different tasks in SemEval-2014 evaluating various computational semantic systems. SemEval-2015 took place in 2015. It was co-located with NAACL-HLT 2015, 2015 Conference of the North American Chapter of the Association for Computational Linguistics – Human Language Technologies and SEM 2015, Third Joint Conference on Lexical and Computational Semantics, Denver, USA. There were 17 different tasks in SemEval-2015 evaluating various computational semantic systems. == SemEval Workshop framework == The framework of the SemEval/Senseval evaluation workshops emulates the Message Understanding Conferences (MUCs) and other evaluation workshops ran by ARPA (Advanced Research Projects Agency, renamed the Defense Advanced Research Projects Agency (DARPA)). Stages of SemEval/Senseval evaluation workshops Firstly, all likely participants were invited to express their interest and participate in the exercise design. A timetable towards a final workshop was worked out. A plan for selecting evaluation materials was agreed. 'Gold standards' for the individual tasks were acquired, often human annotators were considered as a gold standard to measure precision and recall scores of computer systems. These 'gold standards' are what the computational systems strive towards. In WSD tasks, human annotators were set on the task of generating a set of correct WSD answers (i.e. the correct sense for a given word in a given context) The gold standard materials, without answers, were released to participants, who then had a short time to run their programs over them and return their sets of answers to the organizers. The organizers then scored the answers and the scores were announced and discussed at a workshop. == Semantic evaluation tasks == Senseval-1 & Senseval-2 focused on evaluation WSD systems on major languages that were available corpus and computerized dictionary. Senseval-3 looked beyond the lexemes and started to evaluate systems that looked into wider areas of semantics, such as Semantic Roles (technically known as Theta roles in formal semantics), Logic Form Transformation (commonly semantics of phrases, clauses or sentences were represented

  Read more →
• 

  Information gain (decision tree)

  In the context of decision trees in information theory and machine learning, information gain refers to the conditional expected value of the Kullback–Leibler divergence of the univariate probability distribution of one variable from the conditional distribution of this variable given the other one. (In broader contexts, information gain can also be used as a synonym for either Kullback–Leibler divergence or mutual information, but the focus of this article is on the more narrow meaning below.) Explicitly, the information gain of a random variable X {\displaystyle X} obtained from an observation of a random variable A {\displaystyle A} taking value a {\displaystyle a} is defined as: I G ( X , a ) = D KL ( P X ∣ a ∥ P X ) {\displaystyle {\mathit {IG}}(X,a)=D_{\text{KL}}{\bigl (}P_{X\mid a}\parallel P_{X}{\bigr )}} In other words, it is the Kullback–Leibler divergence of P X ( x ) {\displaystyle P_{X}(x)} (the prior distribution for X {\displaystyle X} ) from P X ∣ a ( x ) {\displaystyle P_{X\mid a}(x)} (the posterior distribution for X {\displaystyle X} given A = a {\displaystyle A=a} ). The expected value of the information gain is the mutual information I ( X ; A ) {\displaystyle I(X;A)} : E A ⁡ [ I G ( X , A ) ] = I ( X ; A ) {\displaystyle \operatorname {E} _{A}[{\mathit {IG}}(X,A)]=I(X;A)} i.e. the reduction in the entropy of X {\displaystyle X} achieved by learning the state of the random variable A {\displaystyle A} . In machine learning, this concept can be used to define a preferred sequence of attributes to investigate to most rapidly narrow down the state of X. Such a sequence (which depends on the outcome of the investigation of previous attributes at each stage) is called a decision tree, and when applied in the area of machine learning is known as decision tree learning. Usually an attribute with high mutual information should be preferred to other attributes. == General definition == In general terms, the expected information gain is the reduction in information entropy Η from a prior state to a state that takes some information as given: I G ( T , a ) = H ( T ) − H ( T | a ) , {\displaystyle IG(T,a)=\mathrm {H} {(T)}-\mathrm {H} {(T|a)},} where H ( T | a ) {\displaystyle \mathrm {H} {(T|a)}} is the conditional entropy of T {\displaystyle T} given the value of attribute a {\displaystyle a} . This is intuitively plausible when interpreting entropy Η as a measure of uncertainty of a random variable T {\displaystyle T} : by learning (or assuming) a {\displaystyle a} about T {\displaystyle T} , our uncertainty about T {\displaystyle T} is reduced (i.e. I G ( T , a ) {\displaystyle IG(T,a)} is positive), unless of course T {\displaystyle T} is independent of a {\displaystyle a} , in which case H ( T | a ) = H ( T ) {\displaystyle \mathrm {H} (T|a)=\mathrm {H} (T)} , meaning I G ( T , a ) = 0 {\displaystyle IG(T,a)=0} . == Formal definition == Let T denote a set of training examples, each of the form ( x , y ) = ( x 1 , x 2 , x 3 , . . . , x k , y ) {\displaystyle ({\textbf {x}},y)=(x_{1},x_{2},x_{3},...,x_{k},y)} where x a ∈ v a l s ( a ) {\displaystyle x_{a}\in \mathrm {vals} (a)} is the value of the a th {\displaystyle a^{\text{th}}} attribute or feature of example x {\displaystyle {\textbf {x}}} and y is the corresponding class label. The information gain for an attribute a is defined in terms of Shannon entropy H ( − ) {\displaystyle \mathrm {H} (-)} as follows. For a value v taken by attribute a, let S a ( v ) = { x ∈ T | x a = v } {\displaystyle S_{a}{(v)}=\{{\textbf {x}}\in T|x_{a}=v\}} be defined as the set of training inputs of T for which attribute a is equal to v. Then the information gain of T for attribute a is the difference between the a priori Shannon entropy H ( T ) {\displaystyle \mathrm {H} (T)} of the training set and the conditional entropy H ( T | a ) {\displaystyle \mathrm {H} {(T|a)}} . H ( T | a ) = ∑ v ∈ v a l s ( a ) | S a ( v ) | | T | ⋅ H ( S a ( v ) ) . {\displaystyle \mathrm {H} (T|a)=\sum _{v\in \mathrm {vals} (a)}{{\frac {|S_{a}{(v)}|}{|T|}}\cdot \mathrm {H} \left(S_{a}{\left(v\right)}\right)}.} I G ( T , a ) = H ( T ) − H ( T | a ) {\displaystyle IG(T,a)=\mathrm {H} (T)-\mathrm {H} (T|a)} The mutual information is equal to the total entropy for an attribute if for each of the attribute values a unique classification can be made for the result attribute. In this case, the relative entropies subtracted from the total entropy are 0. In particular, the values v ∈ v a l s ( a ) {\displaystyle v\in vals(a)} defines a partition of the training set data T into mutually exclusive and all-inclusive subsets, inducing a categorical probability distribution P a ( v ) {\textstyle P_{a}{(v)}} on the values v ∈ v a l s ( a ) {\textstyle v\in vals(a)} of attribute a. The distribution is given P a ( v ) := | S a ( v ) | | T | {\textstyle P_{a}{(v)}:={\frac {|S_{a}{(v)}|}{|T|}}} . In this representation, the information gain of T given a can be defined as the difference between the unconditional Shannon entropy of T and the expected entropy of T conditioned on a, where the expectation value is taken with respect to the induced distribution on the values of a. I G ( T , a ) = H ( T ) − ∑ v ∈ v a l s ( a ) P a ( v ) H ( S a ( v ) ) = H ( T ) − E P a [ H ( S a ( v ) ) ] = H ( T ) − H ( T | a ) . {\displaystyle {\begin{alignedat}{2}IG(T,a)&=\mathrm {H} (T)-\sum _{v\in \mathrm {vals} (a)}{P_{a}{(v)}\mathrm {H} \left(S_{a}{(v)}\right)}\\&=\mathrm {H} (T)-\mathbb {E} _{P_{a}}{\left[\mathrm {H} {(S_{a}{(v)})}\right]}\\&=\mathrm {H} (T)-\mathrm {H} {(T|a)}.\end{alignedat}}} == Example == In engineering applications, information is analogous to signal, and entropy is analogous to noise. It determines how a decision tree chooses to split data. The leftmost figure below is very impure and has high entropy corresponding to higher disorder and lower information value. As we go to the right, the entropy decreases, and the information value increases. Now, it is clear that information gain is the measure of how much information a feature provides about a class. Let's visualize information gain in a decision tree as shown in the right: The node t is the parent node, and the sub-nodes tL and tR are child nodes. In this case, the parent node t has a collection of cancer and non-cancer samples denoted as C and NC respectively. We can use information gain to determine how good the splitting of nodes is in a decision tree. In terms of entropy, information gain is defined as: To understand this idea, let's start by an example in which we create a simple dataset and want to see if gene mutations could be related to patients with cancer. Given four different gene mutations, as well as seven samples, the training set for a decision can be created as follows: In this dataset, a 1 means the sample has the mutation (True), while a 0 means the sample does not (False). A sample with C denotes that it has been confirmed to be cancerous, while NC means it is non-cancerous. Using this data, a decision tree can be created with information gain used to determine the candidate splits for each node. For the next step, the entropy at parent node t of the above simple decision tree is computed as:H(t) = −[pC,t log2(pC,t) + pNC,t log2(pNC,t)] where, probability of selecting a class ‘C’ sample at node t, pC,t = n(t, C) / n(t), probability of selecting a class ‘NC’ sample at node t, pNC,t = n(t, NC) / n(t), n(t), n(t, C), and n(t, NC) are the number of total samples, ‘C’ samples and ‘NC’ samples at node t respectively.Using this with the example training set, the process for finding information gain beginning with H ( t ) {\displaystyle \mathrm {H} {(t)}} for Mutation 1 is as follows: pC, t = 4/7 pNC, t = 3/7 H ( t ) {\displaystyle \mathrm {H} {(t)}} = −(4/7 × log2(4/7) + 3/7 × log2(3/7)) = 0.985 Note: H ( t ) {\displaystyle \mathrm {H} {(t)}} will be the same for all mutations at the root. The relatively high value of entropy H ( t ) = 0.985 {\displaystyle \mathrm {H} {(t)}=0.985} (1 is the optimal value) suggests that the root node is highly impure and the constituents of the input at the root node would look like the leftmost figure in the above Entropy Diagram. However, such a set of data is good for learning the attributes of the mutations used to split the node. At a certain node, when the homogeneity of the constituents of the input occurs (as shown in the rightmost figure in the above Entropy Diagram), the dataset would no longer be good for learning. Moving on, the entropy at left and right child nodes of the above decision tree is computed using the formulae:H(tL) = −[pC,L log2(pC,L) + pNC,L log2(pNC,L)]H(tR) = −[pC,R log2(pC,R) + pNC,R log2(pNC,R)]where, probability of selecting a class ‘C’ sample at the left child node, pC,L = n(tL, C) / n(tL), probability of selecting a class ‘NC’ sample at the left child node, pNC,L = n(tL, NC) / n(tL), probability of selecting a class ‘C’ sample at the right child node, pC,R = n(tR, C) / n(tR), prob

  Read more →
• 

  Nearest centroid classifier

  In machine learning, a nearest centroid classifier or nearest prototype classifier is a classification model that assigns to observations the label of the class of training samples whose mean (centroid) is closest to the observation. When applied to text classification using word vectors containing tfidf weights to represent documents, the nearest centroid classifier is known as the Rocchio classifier because of its similarity to the Rocchio algorithm for relevance feedback. An extended version of the nearest centroid classifier has found applications in the medical domain, specifically classification of tumors. == Algorithm == === Training === Given labeled training samples { ( x → 1 , y 1 ) , … , ( x → n , y n ) } {\displaystyle \textstyle \{({\vec {x}}_{1},y_{1}),\dots ,({\vec {x}}_{n},y_{n})\}} with class labels y i ∈ Y {\displaystyle y_{i}\in \mathbf {Y} } , compute the per-class centroids μ → ℓ = 1 | C ℓ | ∑ i ∈ C ℓ x → i {\displaystyle \textstyle {\vec {\mu }}_{\ell }={\frac {1}{|C_{\ell }|}}{\underset {i\in C_{\ell }}{\sum }}{\vec {x}}_{i}} where C ℓ {\displaystyle C_{\ell }} is the set of indices of samples belonging to class ℓ ∈ Y {\displaystyle \ell \in \mathbf {Y} } . === Prediction === The class assigned to an observation x → {\displaystyle {\vec {x}}} is y ^ = arg ⁡ min ℓ ∈ Y ‖ μ → ℓ − x → ‖ {\displaystyle {\hat {y}}={\arg \min }_{\ell \in \mathbf {Y} }\|{\vec {\mu }}_{\ell }-{\vec {x}}\|} .

  Read more →