AI Art Krishna

AI Art Krishna — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  DABUS

  DABUS (Device for the Autonomous Bootstrapping of Unified Sentience) is an artificial intelligence (AI) system created by Stephen Thaler. It reportedly conceived of two novel products — a food container constructed using fractal geometry, which enables rapid reheating, and a flashing beacon for attracting attention in an emergency. The filing of patent applications designating DABUS as inventor has led to decisions by patent offices and courts on whether a patent can be granted for an invention reportedly made by an AI system. == History in different jurisdictions == === Australia === On 17 September 2019, Thaler filed an application to patent a "Food container and devices and methods for attracting enhanced attention," naming DABUS as the inventor. On 21 September 2020, IP Australia found that section 15(1) of the Patents Act 1990 (Cth) is inconsistent with an artificial intelligence machine being treated as an inventor, and Thaler's application had lapsed. Thaler sought judicial review, and on 30 July 2021, the Federal Court set aside IP Australia's decision and ordered IP Australia to reconsider the application. On 13 April 2022, the Full Court of the Federal Court set aside that decision, holding that only a natural person can be an inventor for the purposes of the Patents Act 1990 (Cth) and the Patents Regulations 1991 (Cth), and that such an inventor must be identified for any person to be entitled to a grant of a patent. On 11 November 2022, Thaler was refused special leave to appeal to the High Court. === European Patent Office === On 17 October 2018 and 7 November 2018, Thaler filed two European patent applications with the European Patent Office. The first claimed invention was a "Food Container" and the second was "Devices and Methods for Attracting Enhanced Attention." On 27 January 2020, the EPO rejected the applications on the grounds that the application listed an AI system named DABUS, and not a human, as the inventor, based on Article 81 and Rule 19(1) of the European Patent Convention (EPC). On 21 December 2021, the Board of Appeal of the EPO dismissed Thaler's appeal from the EPO's primary decision. The Board of Appeal confirmed that "under the EPC the designated inventor has to be a person with legal capacity. This is not merely an assumption on which the EPC was drafted. It is the ordinary meaning of the term inventor." === United Kingdom === Similar applications were filed by Thaler to the United Kingdom Intellectual Property Office on 17 October and 7 November 2018. The Office asked Thaler to file statements of inventorship and of right of grant to a patent (Patent Form 7) in respect of each invention within 16 months of the filing date. Thaler filed those forms naming DABUS as the inventor and explaining in some detail why he believed that machines should be regarded as inventors in the circumstances. His application was rejected on the grounds that: (1) naming a machine as inventor did not meet the requirements of the Patents Act 1977; and (2) the IPO was not satisfied as to the manner in which Thaler had acquired rights that would otherwise vest in the inventor. Thaler was not satisfied with the decision and asked for a hearing before an official known as the "hearing officer". By a decision dated 4 December 2019 the hearing officer rejected Thaler's appeal. Thaler appealed against the hearing officer's decision to the Patents Court (a specialist court within the Chancery Division of the High Court of England and Wales that determines patent disputes). On 21 September 2020, Mr Justice Marcus Smith upheld the decision of the hearing officer. On 21 September 2021, Thaler's further appeal to the Court of Appeal was dismissed by Arnold LJ and Laing LJ (Birss LJ dissenting). On 20 December 2023, the UK Supreme Court dismissed a further appeal by Thaler. In its judgment, the court held that an "inventor" under the Patents Act 1977 must be a natural person. === United States === The patent applications on the inventions were refused by the USPTO, which held that only natural persons can be named as inventors in a patent application. Thaler first fought this result by filing a complaint under the Administrative Procedure Act alleging that the decision was "arbitrary, capricious, an abuse of discretion and not in accordance with the law; unsupported by substantial evidence, and in excess of Defendants’ statutory authority." A month later on August 19, 2019, Thaler filed a petition with the USPTO as allowed in 37 C.F.R. § 1.181 stating that DABUS should be the inventor. The judge and Thaler agreed in this case that Thaler himself is unable to receive the patent on behalf of DABUS. In their August 5, 2022, Thaler decision, the US Court of Appeals for the Federal Circuit affirmed that only a natural person could be an inventor, which means that the AI that invents any other type of invention is not addressed by the "who" mentioned in the legislation. === New Zealand === On January 31, 2022, the Intellectual Property Office of New Zealand (IPONZ) decided that a patent application (776029) filed by Stephen Thaler was void, on the basis that no inventor was identified on the patent application. IPONZ determined that DABUS could not be "an actual devisor of the invention" as required by the Patents Act 2013, and that this must be a natural person as held by the previous patent offices above. The High Court of New Zealand confirmed the decision in 2023. === South Africa === On 24 June 2021, the South African Companies and Intellectual Property Commission (CIPC) accepted Dr Thaler's Patent Cooperation Treaty, for a patent in respect of inventions generated by DABUS. In July 2021, the CIPC released a notice of issuance for the patent. It is the first patent granted for an AI invention. === Switzerland === On June 26, 2025, the Swiss Federal Administrative Court ruled that artificial intelligence systems such as DABUS cannot be listed as inventors in patent applications. The court upheld the existing practice of the Swiss Federal Institute of Intellectual Property (IPI), which requires that only natural persons can be recognized as inventors under Swiss patent law. The case concerned a patent application, which sought to designate DABUS as the sole inventor of a food container designed with a fractal geometry to enhance heat distribution. The IPI had rejected the application, arguing that both the absence of a human inventor and the attribution of inventorship to an AI system were inadmissible. While the court dismissed Thaler's main request, it accepted a subsidiary request: if a human applicant recognizes and files a patent based on an AI-generated invention, that person may be considered the inventor. As a result, the application may proceed with Thaler listed as the inventor. The decision (B-2532/2024) can still be appealed to the Swiss Federal Supreme Court.

  Read more →
• 

  Radial basis function kernel

  In machine learning, the radial basis function kernel, or RBF kernel, is a popular kernel function used in various kernelized learning algorithms. In particular, it is commonly used in support vector machine classification. The RBF kernel on two samples x , x ′ ∈ R k {\displaystyle \mathbf {x} ,\mathbf {x'} \in \mathbb {R} ^{k}} , represented as feature vectors in some input space, is defined as K ( x , x ′ ) = exp ⁡ ( − ‖ x − x ′ ‖ 2 2 σ 2 ) {\displaystyle K(\mathbf {x} ,\mathbf {x'} )=\exp \left(-{\frac {\|\mathbf {x} -\mathbf {x'} \|^{2}}{2\sigma ^{2}}}\right)} ‖ x − x ′ ‖ 2 {\displaystyle \textstyle \|\mathbf {x} -\mathbf {x'} \|^{2}} may be recognized as the squared Euclidean distance between the two feature vectors. σ {\displaystyle \sigma } is a free parameter. An equivalent definition involves a parameter γ = 1 2 σ 2 {\displaystyle \textstyle \gamma ={\tfrac {1}{2\sigma ^{2}}}} : K ( x , x ′ ) = exp ⁡ ( − γ ‖ x − x ′ ‖ 2 ) {\displaystyle K(\mathbf {x} ,\mathbf {x'} )=\exp(-\gamma \|\mathbf {x} -\mathbf {x'} \|^{2})} Since the value of the RBF kernel decreases with distance and ranges between zero (in the infinite-distance limit) and one (when x = x'), it has a ready interpretation as a similarity measure. The feature space of the kernel has an infinite number of dimensions; for σ = 1 {\displaystyle \sigma =1} , its expansion using the multinomial theorem is: exp ⁡ ( − 1 2 ‖ x − x ′ ‖ 2 ) = exp ⁡ ( 2 2 x ⊤ x ′ − 1 2 ‖ x ‖ 2 − 1 2 ‖ x ′ ‖ 2 ) = exp ⁡ ( x ⊤ x ′ ) exp ⁡ ( − 1 2 ‖ x ‖ 2 ) exp ⁡ ( − 1 2 ‖ x ′ ‖ 2 ) = ∑ j = 0 ∞ ( x ⊤ x ′ ) j j ! exp ⁡ ( − 1 2 ‖ x ‖ 2 ) exp ⁡ ( − 1 2 ‖ x ′ ‖ 2 ) = ∑ j = 0 ∞ ∑ n 1 + n 2 + ⋯ + n k = j exp ⁡ ( − 1 2 ‖ x ‖ 2 ) x 1 n 1 ⋯ x k n k n 1 ! ⋯ n k ! exp ⁡ ( − 1 2 ‖ x ′ ‖ 2 ) x ′ 1 n 1 ⋯ x ′ k n k n 1 ! ⋯ n k ! = ⟨ φ ( x ) , φ ( x ′ ) ⟩ {\displaystyle {\begin{alignedat}{2}\exp \left(-{\frac {1}{2}}\|\mathbf {x} -\mathbf {x'} \|^{2}\right)&=\exp \left({\frac {2}{2}}\mathbf {x} ^{\top }\mathbf {x'} -{\frac {1}{2}}\|\mathbf {x} \|^{2}-{\frac {1}{2}}\|\mathbf {x'} \|^{2}\right)\\[5pt]&=\exp \left(\mathbf {x} ^{\top }\mathbf {x'} \right)\exp \left(-{\frac {1}{2}}\|\mathbf {x} \|^{2}\right)\exp \left(-{\frac {1}{2}}\|\mathbf {x'} \|^{2}\right)\\[5pt]&=\sum _{j=0}^{\infty }{\frac {(\mathbf {x} ^{\top }\mathbf {x'} )^{j}}{j!}}\exp \left(-{\frac {1}{2}}\|\mathbf {x} \|^{2}\right)\exp \left(-{\frac {1}{2}}\|\mathbf {x'} \|^{2}\right)\\[5pt]&=\sum _{j=0}^{\infty }\quad \sum _{n_{1}+n_{2}+\dots +n_{k}=j}\exp \left(-{\frac {1}{2}}\|\mathbf {x} \|^{2}\right){\frac {x_{1}^{n_{1}}\cdots x_{k}^{n_{k}}}{\sqrt {n_{1}!\cdots n_{k}!}}}\exp \left(-{\frac {1}{2}}\|\mathbf {x'} \|^{2}\right){\frac {{x'}_{1}^{n_{1}}\cdots {x'}_{k}^{n_{k}}}{\sqrt {n_{1}!\cdots n_{k}!}}}\\[5pt]&=\langle \varphi (\mathbf {x} ),\varphi (\mathbf {x'} )\rangle \end{alignedat}}} φ ( x ) = exp ⁡ ( − 1 2 ‖ x ‖ 2 ) ( a ℓ 0 ( 0 ) , a 1 ( 1 ) , … , a ℓ 1 ( 1 ) , … , a 1 ( j ) , … , a ℓ j ( j ) , … ) {\displaystyle \varphi (\mathbf {x} )=\exp \left(-{\frac {1}{2}}\|\mathbf {x} \|^{2}\right)\left(a_{\ell _{0}}^{(0)},a_{1}^{(1)},\dots ,a_{\ell _{1}}^{(1)},\dots ,a_{1}^{(j)},\dots ,a_{\ell _{j}}^{(j)},\dots \right)} where ℓ j = ( k + j − 1 j ) {\displaystyle \ell _{j}={\tbinom {k+j-1}{j}}} , a ℓ ( j ) = x 1 n 1 ⋯ x k n k n 1 ! ⋯ n k ! | n 1 + n 2 + ⋯ + n k = j ∧ 1 ≤ ℓ ≤ ℓ j {\displaystyle a_{\ell }^{(j)}={\frac {x_{1}^{n_{1}}\cdots x_{k}^{n_{k}}}{\sqrt {n_{1}!\cdots n_{k}!}}}\quad |\quad n_{1}+n_{2}+\dots +n_{k}=j\wedge 1\leq \ell \leq \ell _{j}} == Approximations == Because support vector machines and other models employing the kernel trick do not scale well to large numbers of training samples or large numbers of features in the input space, several approximations to the RBF kernel (and similar kernels) have been introduced. Typically, these take the form of a function z that maps a single vector to a vector of higher dimensionality, approximating the kernel: ⟨ z ( x ) , z ( x ′ ) ⟩ ≈ ⟨ φ ( x ) , φ ( x ′ ) ⟩ = K ( x , x ′ ) {\displaystyle \langle z(\mathbf {x} ),z(\mathbf {x'} )\rangle \approx \langle \varphi (\mathbf {x} ),\varphi (\mathbf {x'} )\rangle =K(\mathbf {x} ,\mathbf {x'} )} where φ {\displaystyle \textstyle \varphi } is the implicit mapping embedded in the RBF kernel. === Fourier random features === One way to construct such a z is to randomly sample from the Fourier transformation of the kernel φ ( x ) = 1 D [ cos ⁡ ⟨ w 1 , x ⟩ , sin ⁡ ⟨ w 1 , x ⟩ , … , cos ⁡ ⟨ w D , x ⟩ , sin ⁡ ⟨ w D , x ⟩ ] T {\displaystyle \varphi (x)={\frac {1}{\sqrt {D}}}[\cos \langle w_{1},x\rangle ,\sin \langle w_{1},x\rangle ,\ldots ,\cos \langle w_{D},x\rangle ,\sin \langle w_{D},x\rangle ]^{T}} where w 1 , . . . , w D {\displaystyle w_{1},...,w_{D}} are independent samples from the normal distribution N ( 0 , σ − 2 I ) {\displaystyle N(0,\sigma ^{-2}I)} . Theorem: E ⁡ [ ⟨ φ ( x ) , φ ( y ) ⟩ ] = e ‖ x − y ‖ 2 / ( 2 σ 2 ) . {\displaystyle \operatorname {E} [\langle \varphi (x),\varphi (y)\rangle ]=e^{\|x-y\|^{2}/(2\sigma ^{2})}.} Proof: It suffices to prove the case of D = 1 {\displaystyle D=1} . Use the trigonometric identity cos ⁡ ( a − b ) = cos ⁡ ( a ) cos ⁡ ( b ) + sin ⁡ ( a ) sin ⁡ ( b ) {\displaystyle \cos(a-b)=\cos(a)\cos(b)+\sin(a)\sin(b)} , the spherical symmetry of Gaussian distribution, then evaluate the integral ∫ − ∞ ∞ cos ⁡ ( k x ) e − x 2 / 2 2 π d x = e − k 2 / 2 . {\displaystyle \int _{-\infty }^{\infty }{\frac {\cos(kx)e^{-x^{2}/2}}{\sqrt {2\pi }}}dx=e^{-k^{2}/2}.} Theorem: Var ⁡ [ ⟨ φ ( x ) , φ ( y ) ⟩ ] = O ( D − 1 ) {\displaystyle \operatorname {Var} [\langle \varphi (x),\varphi (y)\rangle ]=O(D^{-1})} . (Appendix A.2). === Nyström method === Another approach uses the Nyström method to approximate the eigendecomposition of the Gram matrix K, using only a random sample of the training set.

  Read more →
• 

  Detrended correspondence analysis

  Detrended correspondence analysis (DCA) is a multivariate statistical technique widely used by ecologists to find the main factors or gradients in large, species-rich but usually sparse data matrices that typify ecological community data. DCA is frequently used to suppress artifacts inherent in most other multivariate analyses when applied to gradient data. == History == DCA was created in 1979 by Mark Hill of the United Kingdom's Institute for Terrestrial Ecology (now merged into Centre for Ecology and Hydrology) and implemented in FORTRAN code package called DECORANA (Detrended Correspondence Analysis), a correspondence analysis method. DCA is sometimes erroneously referred to as DECORANA; however, DCA is the underlying algorithm, while DECORANA is a tool implementing it. == Issues addressed == According to Hill and Gauch, DCA suppresses two artifacts inherent in most other multivariate analyses when applied to gradient data. An example is a time-series of plant species colonising a new habitat; early successional species are replaced by mid-successional species, then by late successional ones (see example below). When such data are analysed by a standard ordination such as a correspondence analysis: the ordination scores of the samples will exhibit the 'edge effect', i.e. the variance of the scores at the beginning and the end of a regular succession of species will be considerably smaller than that in the middle, when presented as a graph the points will be seen to follow a horseshoe shaped curve rather than a straight line ('arch effect'), even though the process under analysis is a steady and continuous change that human intuition would prefer to see as a linear trend. Outside ecology, the same artifacts occur when gradient data are analysed (e.g. soil properties along a transect running between 2 different geologies, or behavioural data over the lifespan of an individual) because the curved projection is an accurate representation of the shape of the data in multivariate space. Ter Braak and Prentice (1987, p. 121) cite a simulation study analysing two-dimensional species packing models resulting in a better performance of DCA compared to CA. == Method == DCA is an iterative algorithm that has shown itself to be a highly reliable and useful tool for data exploration and summary in community ecology (Shaw 2003). It starts by running a standard ordination (CA or reciprocal averaging) on the data, to produce the initial horse-shoe curve in which the 1st ordination axis distorts into the 2nd axis. It then divides the first axis into segments (default = 26), and rescales each segment to have mean value of zero on the 2nd axis - this effectively squashes the curve flat. It also rescales the axis so that the ends are no longer compressed relative to the middle, so that 1 DCA unit approximates to the same rate of turnover all the way through the data: the rule of thumb is that 4 DCA units mean that there has been a total turnover in the community. Ter Braak and Prentice (1987, p. 122) warn against the non-linear rescaling of the axes due to robustness issues and recommend using detrending-by-polynomials only. == Drawbacks == No significance tests are available with DCA, although there is a constrained (canonical) version called DCCA in which the axes are forced by Multiple linear regression to correlate optimally with a linear combination of other (usually environmental) variables; this allows testing of a null model by Monte-Carlo permutation analysis. == Example == The example shows an ideal data set: The species data is in rows, samples in columns. For each sample along the gradient, a new species is introduced but another species is no longer present. The result is a sparse matrix. Ones indicate the presence of a species in a sample. Except at the edges each sample contains five species. The plot of the first two axes of the correspondence analysis result on the right hand side clearly shows the disadvantages of this procedure: the edge effect, i.e. the points are clustered at the edges of the first axis, and the arch effect. == Software == An open source implementation of DCA, based on the original FORTRAN code, is available in the vegan R-package.

  Read more →
• 

  Reservoir computing

  Reservoir computing is a framework for computation derived from recurrent neural network theory that maps input signals into higher dimensional computational spaces through the dynamics of a fixed, non-linear system called a reservoir. After the input signal is fed into the reservoir, which is treated as a "black box," a simple readout mechanism is trained to read the state of the reservoir and map it to the desired output. The first key benefit of this framework is that training is performed only at the readout stage, as the reservoir dynamics are fixed. The second is that the computational power of naturally available systems, both classical and quantum mechanical, can be used to reduce the effective computational cost. == History == The first examples of reservoir neural networks demonstrated that randomly connected recurrent neural networks could be used for sensorimotor sequence learning, and simple forms of interval and speech discrimination. In these early models the memory in the network took the form of both short-term synaptic plasticity and activity mediated by recurrent connections. In other early reservoir neural network models the memory of the recent stimulus history was provided solely by the recurrent activity. Overall, the general concept of reservoir computing stems from the use of recursive connections within neural networks to create a complex dynamical system. It is a generalisation of earlier neural network architectures such as recurrent neural networks, liquid-state machines and echo-state networks. Reservoir computing also extends to physical systems that are not networks in the classical sense, but rather continuous systems in space and/or time: e.g. a literal "bucket of water" can serve as a reservoir that performs computations on inputs given as perturbations of the surface. The resultant complexity of such recurrent neural networks was found to be useful in solving a variety of problems including language processing and dynamic system modeling. However, training of recurrent neural networks is challenging and computationally expensive. Reservoir computing reduces those training-related challenges by fixing the dynamics of the reservoir and only training the linear output layer. A large variety of nonlinear dynamical systems can serve as a reservoir that performs computations. In recent years semiconductor lasers have attracted considerable interest as computation can be fast and energy efficient compared to electrical components. Recent advances in both AI and quantum information theory have given rise to the concept of quantum neural networks. These hold promise in quantum information processing, which is challenging to classical networks, but can also find application in solving classical problems. In 2018, a physical realization of a quantum reservoir computing architecture was demonstrated in the form of nuclear spins within a molecular solid. However, the nuclear spin experiments in did not demonstrate quantum reservoir computing per se as they did not involve processing of sequential data. Rather the data were vector inputs, which makes this more accurately a demonstration of quantum implementation of a random kitchen sink algorithm (also going by the name of extreme learning machines in some communities). In 2019, another possible implementation of quantum reservoir processors was proposed in the form of two-dimensional fermionic lattices. In 2020, realization of reservoir computing on gate-based quantum computers was proposed and demonstrated on cloud-based IBM superconducting near-term quantum computers. Reservoir computers have been used for time-series analysis purposes. In particular, some of their usages involve chaotic time-series prediction, separation of chaotic signals, and link inference of networks from their dynamics. == Classical reservoir computing == === Reservoir === The 'reservoir' in reservoir computing is the internal structure of the computer, and must have two properties: it must be made up of individual, non-linear units, and it must be capable of storing information. The non-linearity describes the response of each unit to input, which is what allows reservoir computers to solve complex problems. Reservoirs are able to store information by connecting the units in recurrent loops, where the previous input affects the next response. The change in reaction due to the past allows the computers to be trained to complete specific tasks. Reservoirs can be virtual or physical. Virtual reservoirs are typically randomly generated and are designed like neural networks. Virtual reservoirs can be designed to have non-linearity and recurrent loops, but, unlike neural networks, the connections between units are randomized and remain unchanged throughout computation. Physical reservoirs are possible because of the inherent non-linearity of certain natural systems. The interaction between ripples on the surface of water contains the nonlinear dynamics required in reservoir creation, and a pattern recognition RC was developed by first inputting ripples with electric motors then recording and analyzing the ripples in the readout. === Readout === The readout is a neural network layer that performs a linear transformation on the output of the reservoir. The weights of the readout layer are trained by analyzing the spatiotemporal patterns of the reservoir after excitation by known inputs, and by utilizing a training method such as a linear regression or a Ridge regression. As its implementation depends on spatiotemporal reservoir patterns, the details of readout methods are tailored to each type of reservoir. For example, the readout for a reservoir computer using a container of liquid as its reservoir might entail observing spatiotemporal patterns on the surface of the liquid. === Types === ==== Context reverberation network ==== An early example of reservoir computing was the context reverberation network. In this architecture, an input layer feeds into a high dimensional dynamical system which is read out by a trainable single-layer perceptron. Two kinds of dynamical system were described: a recurrent neural network with fixed random weights, and a continuous reaction–diffusion system inspired by Alan Turing's model of morphogenesis. At the trainable layer, the perceptron associates current inputs with the signals that reverberate in the dynamical system; the latter were said to provide a dynamic "context" for the inputs. In the language of later work, the reaction–diffusion system served as the reservoir. ==== Echo state network ==== The tree echo state network (TreeESN) model represents a generalization of the reservoir computing framework to tree structured data. ==== Liquid-state machine ==== Chaotic liquid state machine The liquid (i.e. reservoir) of a chaotic liquid state machine (CLSM), or chaotic reservoir, is made from chaotic spiking neurons but which stabilize their activity by settling to a single hypothesis that describes the trained inputs of the machine. This is in contrast to general types of reservoirs that don't stabilize. The liquid stabilization occurs via synaptic plasticity and chaos control that govern neural connections inside the liquid. CLSM showed promising results in learning sensitive time series data. ==== Nonlinear transient computation ==== This type of information processing is most relevant when time-dependent input signals depart from the mechanism's internal dynamics. These departures cause transients or temporary altercations which are represented in the device's output. ==== Deep reservoir computing ==== The extension of the reservoir computing framework towards deep learning, with the introduction of deep reservoir computing and of the deep echo state network (DeepESN) model allows to develop efficiently trained models for hierarchical processing of temporal data, at the same time enabling the investigation on the inherent role of layered composition in recurrent neural networks. == Quantum reservoir computing == Quantum reservoir computing may use the nonlinear nature of quantum mechanical interactions or processes to form the characteristic nonlinear reservoirs but may also be done with linear reservoirs when the injection of the input to the reservoir creates the nonlinearity. The marriage of machine learning and quantum devices is leading to the emergence of quantum neuromorphic computing as a new research area. === Types === ==== Gaussian states of interacting quantum harmonic oscillators ==== Gaussian states are a paradigmatic class of states of continuous variable quantum systems. Although they can nowadays be created and manipulated in, e.g, state-of-the-art optical platforms, naturally robust to decoherence, it is well-known that they are not sufficient for, e.g., universal quantum computing because transformations that preserve the Gaussian nature of a state are linear. Normally, linear dynamics would not be sufficient for nontrivial reser

  Read more →
• 

  PenTile matrix family

  PenTile matrix is a family of patented subpixel matrix schemes used in electronic device displays. PenTile is a trademark of Samsung. PenTile matrices are used in AMOLED and LCD displays. These subpixel layouts are specifically designed to operate with proprietary algorithms for subpixel rendering embedded in the display driver, allowing plug and play compatibility with conventional RGB (Red-Green-Blue) stripe panels. == Overview == "PenTile Matrix" (a neologism from penta-, meaning "five" in Greek and tile) describes the geometric layout of the prototypical subpixel arrangement developed in the early 1990s. The layout consists of a quincunx comprising two red subpixels, two green subpixels, and one central blue subpixel in each unit cell. It was inspired by biomimicry of the human retina, which has nearly equal numbers of L and M type cone cells, but significantly fewer S cones. As the S cones are primarily responsible for perceiving blue colors, which do not appreciably affect the perception of luminance, reducing the number of blue subpixels with respect to the red and green subpixels in a display does not reduce the image quality. However, the layout may cause color leakage image distortion, which can be reduced by filters. In some cases the layout causes reduced moiré and blockiness compared to conventional RGB layouts. The PenTile layout is specifically designed to work with and be dependent upon subpixel rendering that uses only one and a quarter subpixel per pixel, on average, to render an image. That is, that any given input pixel is mapped to either a red-centered logical pixel, or a green-centered logical pixel. === History === PenTile was invented by Candice H. Brown Elliott, for which she was awarded the Society for Information Display's Otto Schade Prize in 2014. The technology was licensed by the company Clairvoyante from 2000 until 2008, during which time several prototype PenTile displays were developed by a number of Asian liquid crystal display (LCD) manufacturers. In March 2008, Samsung Electronics acquired Clairvoyante's PenTile IP assets. Samsung then funded a new company, Nouvoyance, Inc. to continue development of the PenTile technology. == PenTile RGBG == PenTile RGBG layout used in AMOLED and plasma displays uses green pixels interleaved with alternating red and blue pixels. The human eye is most sensitive to green, especially for high resolution luminance information. The green subpixels are mapped to input pixels on a one-to-one basis. The red and blue subpixels are subsampled, reconstructing the chroma signal at a lower resolution. The luminance signal is processed using adaptive subpixel rendering filters to optimize reconstruction of high spatial frequencies from the input image, wherein the green subpixels provide the majority of the reconstruction. The red and blue subpixels are capable of reconstructing the horizontal and vertical spatial frequencies, but not the highest of the diagonal. Diagonal high spatial frequency information in the red and blue channels of the input image are transferred to the green subpixels for image reconstruction. Thus the RG-BG scheme creates a color display with one third fewer subpixels than a traditional RGB-RGB scheme but with the same measured luminance display resolution. This is similar to the Bayer filter commonly used in digital cameras. === Devices === As of 2021, "almost all" OLED screens in portable consumer devices use some form of Pentile subpixel layout. == PenTile RGBW == PenTile RGBW technology, used in LCD, adds an extra subpixel to the traditional red, green and blue subpixels that is a clear area without color filtering material and with the only purpose of letting backlight come through, hence W for white. This makes it possible to produce a brighter image compared to an RGB-matrix while using the same amount of power, or produce an equally bright image while using less power. The PenTile RGBW layout uses each red, green, blue and white subpixel to present high-resolution luminance information to the human eyes' red-sensing and green-sensing cone cells, while using the combined effect of all the color subpixels to present lower-resolution chroma (color) information to all three cone cell types. Combined, this optimizes the match of display technology to the biological mechanisms of human vision. The layout uses one third fewer subpixels for the same resolution as the RGB stripe (RGB-RGB) layout, in spite of having four color primaries instead of the conventional three, using subpixel rendering combined with metamer rendering. Metamer rendering optimizes the energy distribution between the white subpixel and the combined red, green, and blue subpixels: W <> RGB, to improve image sharpness. The display driver chip has an RGB to RGBW color vector space converter and gamut mapping algorithm, followed by metamer and subpixel rendering algorithms. In order to maintain saturated color quality, to avoid simultaneous contrast error between saturated colors and peak white brightness, while simultaneously reducing backlight power requirements, the display backlight brightness is under control of the PenTile driver engine. When the image is mostly desaturated colors, those near white or grey, the backlight brightness is significantly reduced, often to less than 50% peak, while the LCD levels are increased to compensate. When the image has very bright saturated colors, the backlight brightness is maintained at higher levels. The PenTile RGBW also has an optional high-brightness mode that doubles the brightness of the desaturated color image areas, such as black-and-white text, for improved outdoor viewability. === Devices === Motorola MC65 Motorola ES55 Motorola ES400 Motorola Atrix 4G Samsung Galaxy Note 10.1 2014 version Lenovo Yoga 2 Pro Lenovo Yoga 3 Pro HP ENVY TouchSmart 14-k022tx Sleekbook MSI GS60 Ghost Pro 4K Lenovo IdeaPad Y50 4K Asus ZenBook UX303LN 4K Asus ZenBook Pro UX501JW LG UH7500/6500/6100 LG ThinQ G7/G7+ Oculus Quest 1 == Controversy == An ongoing controversy regarding the definition or measurement of resolution of color subpixelated flat panel displays led many people to question the resolution claims of PenTile display products. Journalists have noted that in "just about every flat-panel TV in existence, each pixel is composed of one red, one green, and one blue subpixel (RGB), all of uniform size". In traditional flat-panel screens, the resolution is defined by the number of red, green, and blue subpixels, in groups of three, in an array in each axis. As a result, each pixel or group of subpixels can render any colour on the screen, regardless of neighbouring pixels. This is not the case with PenTile screens. The Video Electronics Standards Association (VESA) method of measuring and defining resolution in color displays is to measure the contrast of line pairs, requiring a minimum of 50% Michelson contrast for displays intended for rendering text. The developers of PenTile displays use this VESA criterion for contrast of line pairs to calculate the resolutions specified. In the RGBG layout the alternate red and blue subpixels are 'shared' or sub-sampled with neighboring pixels. Due to the one third lower subpixel density on PenTile displays the pixel structure may be more visible when compared to RGB stripe displays with the same pixel density. The loss of subpixels for a given resolution specification has led some journalists to describe the use of PenTile as "shady practice" and "sort of cheating". For a given size and resolution specification, the PenTile screen can appear grainy, pixelated, speckled, with blurred text on some saturated colors and backgrounds when compared to RGB stripe color. This effect is understood to be caused by the restriction of the number of subpixels that may participate in the image reconstruction when colors are highly saturated to primaries. In the RGBW case, this is caused as the W subpixel will not be available in order to maintain the saturated color. In the RGBG case, this effect will occur when the color boundary is primarily red or blue, as the fully populated (one green per pixel) sub-pixel cannot contribute. For all other cases, text and especially full color images are effectively reconstructed. == Advantages and disadvantages == The PenTile layout reduces the number of subpixels needed to create a specified resolution. Consequently it is possible to achieve an HD resolution on a PenTile AMOLED screen at lower cost than other technologies, and most reviewers note that "300 ppi" (as per VESA - not full pixels) resolution displays (such as Samsung Galaxy S III) make the PenTile effect less obvious than lower resolution PenTile displays (Droid Razr). The second advantage is lower power consumption: the HTC One S's use of a PenTile display makes it more energy efficient and thinner than equivalent LCD screens, giving it better battery life than the HTC One X's IPS LCD. A PenTile AMOLED screen is also

  Read more →
• 

  Rectified linear unit

  In the context of artificial neural networks, the rectifier or ReLU (rectified linear unit) activation function is an activation function defined as the non-negative part of its argument, i.e., the ramp function: ReLU ⁡ ( x ) = x + = max ( 0 , x ) = x + | x | 2 = { x if x > 0 , 0 x ≤ 0 {\displaystyle \operatorname {ReLU} (x)=x^{+}=\max(0,x)={\frac {x+|x|}{2}}={\begin{cases}x&{\text{if }}x>0,\\0&x\leq 0\end{cases}}} where x {\displaystyle x} is the input to a neuron. This is analogous to half-wave rectification in electrical engineering. ReLU is one of the most popular activation functions for artificial neural networks, and finds application in computer vision and speech recognition using deep neural nets and computational neuroscience. == History == The ReLU was first used by Alston Householder in 1941 as a mathematical abstraction of biological neural networks. Kunihiko Fukushima in 1969 used ReLU in the context of visual feature extraction in hierarchical neural networks. In 1998, Gregory Woodbury demonstrated that the rectified linear function could account for a broad range of emergent properties in the visual cortex. His work showed that a single unified model could drive the joint development of refined retinotopic maps, ocular dominance columns, and orientation selectivity. By utilizing the rectifier's "cutoff" property, Woodbury achieved a close quantitative fit to biological data, matching the spatial periodicities and topographic refinement patterns observed in macaque and cat cortical maps. Furthermore, he extended this framework to adult plasticity, accurately replicating the spatial and temporal dynamics of lesion-induced cortical reorganization. This research established that the rectified linear response was a necessary mechanism for the stable self-organisation and maintenance of complex, multi-feature neural maps. In 2000, Hahnloser et al. argued that ReLU approximates the biological relationship between neural firing rates and input current, in addition to enabling recurrent neural network dynamics to stabilise under weaker criteria. Prior to 2010, most activation functions used were the logistic sigmoid (which is inspired by probability theory; see logistic regression) and its more numerically efficient counterpart, the hyperbolic tangent. Around 2010, the use of ReLU became common again. Jarrett et al. (2009) noted that rectification by either absolute or ReLU (which they called "positive part") was critical for object recognition in convolutional neural networks (CNNs), specifically because it allows average pooling without neighboring filter outputs cancelling each other out. They hypothesized that the use of sigmoid or tanh was responsible for poor performance in previous CNNs. Nair and Hinton (2010) made a theoretical argument that the softplus activation function should be used, in that the softplus function numerically approximates the sum of an exponential number of linear models that share parameters. They then proposed ReLU as a good approximation to it. Specifically, they began by considering a single binary neuron in a Boltzmann machine that takes x {\displaystyle x} as input, and produces 1 as output with probability σ ( x ) = 1 1 + e − x {\displaystyle \sigma (x)={\frac {1}{1+e^{-x}}}} . They then considered extending its range of output by making infinitely many copies of it X 1 , X 2 , X 3 , … {\displaystyle X_{1},X_{2},X_{3},\dots } , that all take the same input, offset by an amount 0.5 , 1.5 , 2.5 , … {\displaystyle 0.5,1.5,2.5,\dots } , then their outputs are added together as ∑ i = 1 ∞ X i {\displaystyle \sum _{i=1}^{\infty }X_{i}} . They then demonstrated that ∑ i = 1 ∞ X i {\displaystyle \sum _{i=1}^{\infty }X_{i}} is approximately equal to N ( log ⁡ ( 1 + e x ) , σ ( x ) ) {\displaystyle {\mathcal {N}}(\log(1+e^{x}),\sigma (x))} , which is also approximately equal to ReLU ⁡ ( N ( x , σ ( x ) ) ) {\displaystyle \operatorname {ReLU} ({\mathcal {N}}(x,\sigma (x)))} , where N {\displaystyle {\mathcal {N}}} stands for the gaussian distribution. They also argued for another reason for using ReLU: that it allows "intensity equivariance" in image recognition. That is, multiplying input image by a constant k {\displaystyle k} multiplies the output also. In contrast, this is false for other activation functions like sigmoid or tanh. They found that ReLU activation allowed good empirical performance in restricted Boltzmann machines. Glorot et al (2011) argued that ReLU has the following advantages over sigmoid or tanh: ReLU is more similar to biological neurons' responses in their main operating regime. ReLU avoids vanishing gradients. ReLU is cheaper to compute. ReLU creates sparse representation naturally, because many hidden units output exactly zero for a given input. They also found empirically that deep networks trained with ReLU can achieve strong performance without unsupervised pre-training, especially on large, purely supervised tasks. In 2017, the rectified linear function became a central component of the transformer architecture introduced in the Vaswani et al paper "Attention Is All You Need". Within every transformer layer, ReLU is utilized in the position-wise feed-forward networks (FFN), defined by Equation 2 of their paper: FFN ⁡ ( x ) = max ( 0 , x W 1 + b 1 ) W 2 + b 2 {\displaystyle \operatorname {FFN} (x)=\max(0,xW_{1}+b_{1})W_{2}+b_{2}} This equation is foundational to the model's capacity; while the attention mechanism determines the relationships between tokens, the ReLU-based FFN performs the majority of the numerical computation and houses the bulk of the model's parameters. The efficiency and scalability of this rectified framework triggered a global technological revolution, enabling the development of Large Language Models that have had a profound economic impact. The industrial response to this architecture—including the massive expansion of AI-specific hardware and the birth of the generative AI sector—has positioned the Transformer as a cornerstone of 21st-century infrastructure. During the post 2017 period of rapid AI advancement, the rectified linear unit function has been key to achieving increased model performance and scaling due to the fact that it zeros out responses that are immaterial for a given stimuli, preventing them from accumulating in massive scale models. It is the complete silencing of the parts of the model found to be stimuli-irrelevant during learning that allows for scaling. As the stimuli-irrelevant proportion of the model becomes more massive, these highly numerous connections within the model would inevitably accumulate during scaling no matter how small each individual response is. Therefore, the rectified linear unit function, with its absolute zeroing property, enabled the scaling to hundred billion parameter models and beyond. Early Transformer scaling giants like GPT-3 (2020) and Falcon-180B (2023) relied on the rectified linear unit function explicitly, while successors such as GPT-4 (2023) and Llama 3 (2024) utilized smoother variants like GELU or SwiGLU. These variants were used to improve training stability while fundamentally preserving the rectified principle of zeroing low responses. At the centre of modern artificial intelligence ReLU and its variants maintain absolute zero response across the bulk of the model at any one time, while maintaining approximately linear reponses for stimuli-relevant connections enabling high performance on each specific cognitive task. This feature of activation sparsity has been critical for massive scaling and performance gains of AI models right up to the present day. == Advantages == Advantages of ReLU include: Sparse activation: for example, in a randomly initialized network, only about 50% of hidden units are activated (i.e. have a non-zero output). Better gradient propagation: fewer vanishing gradient problems compared to sigmoidal activation functions that saturate in both directions. Efficiency: only requires comparison and addition. Scale-invariant (homogeneous, or "intensity equivariance"): max ( 0 , a x ) = a max ( 0 , x ) for a ≥ 0 {\displaystyle \max(0,ax)=a\max(0,x){\text{ for }}a\geq 0} . == Potential problems == Possible downsides can include: Non-differentiability at zero (however, it is differentiable anywhere else, and the value of the derivative at zero can be chosen to be 0 or 1 arbitrarily). Not zero-centered: ReLU outputs are always non-negative. This can make it harder for the network to learn during backpropagation, because gradient updates tend to push weights in one direction (positive or negative). Batch normalization can help address this. ReLU is unbounded. Redundancy of the parametrization: Because ReLU is scale-invariant, the network computes the exact same function by scaling the weights and biases in front of a ReLU activation by k {\displaystyle k} , and the weights after by 1 / k {\displaystyle 1/k} . Dying ReLU: ReLU neurons can sometimes be pushed into states

  Read more →
• 

  Probabilistic latent semantic analysis

  Probabilistic latent semantic analysis (PLSA), also known as probabilistic latent semantic indexing (PLSI, especially in information retrieval circles) is a statistical technique for the analysis of two-mode and co-occurrence data. In effect, one can derive a low-dimensional representation of the observed variables in terms of their affinity to certain hidden variables, just as in latent semantic analysis, from which PLSA evolved. Compared to standard latent semantic analysis which stems from linear algebra and downsizes the occurrence tables (usually via a singular value decomposition), probabilistic latent semantic analysis is based on a mixture decomposition derived from a latent class model. == Model == Considering observations in the form of co-occurrences ( w , d ) {\displaystyle (w,d)} of words and documents, PLSA models the probability of each co-occurrence as a mixture of conditionally independent multinomial distributions: P ( w , d ) = ∑ c P ( d ) P ( c | d ) P ( w | c ) = P ( d ) ∑ c P ( c | d ) P ( w | c ) {\displaystyle P(w,d)=\sum _{c}P(d)P(c|d)P(w|c)=P(d)\sum _{c}P(c|d)P(w|c)} with c {\displaystyle c} being the words' topic. Note that the number of topics is a hyperparameter that must be chosen in advance and is not estimated from the data. The first formulation is the symmetric formulation, where w {\displaystyle w} and d {\displaystyle d} are both generated from the latent class c {\displaystyle c} in similar ways (using the conditional probabilities P ( d | c ) {\displaystyle P(d|c)} and P ( w | c ) {\displaystyle P(w|c)} ), whereas the second formulation is the asymmetric formulation, where, for each document d {\displaystyle d} , a latent class is chosen conditionally to the document according to P ( c | d ) {\displaystyle P(c|d)} , and a word is then generated from that class according to P ( w | c ) {\displaystyle P(w|c)} . Although we have used words and documents in this example, the co-occurrence of any couple of discrete variables may be modelled in exactly the same way. So, the number of parameters is equal to c d + w c {\displaystyle cd+wc} . The number of parameters grows linearly with the number of documents. In addition, although PLSA is a generative model of the documents in the collection it is estimated on, it is not a generative model of new documents. Their parameters are learned using the EM algorithm. == Application == PLSA may be used in a discriminative setting, via Fisher kernels. PLSA has applications in information retrieval and filtering, natural language processing, machine learning from text, bioinformatics, and related areas. It is reported that the aspect model used in the probabilistic latent semantic analysis has severe overfitting problems. == Extensions == Hierarchical extensions: Asymmetric: MASHA ("Multinomial ASymmetric Hierarchical Analysis") Symmetric: HPLSA ("Hierarchical Probabilistic Latent Semantic Analysis") Generative models: The following models have been developed to address an often-criticized shortcoming of PLSA, namely that it is not a proper generative model for new documents. Latent Dirichlet allocation – adds a Dirichlet prior on the per-document topic distribution Higher-order data: Although this is rarely discussed in the scientific literature, PLSA extends naturally to higher order data (three modes and higher), i.e. it can model co-occurrences over three or more variables. In the symmetric formulation above, this is done simply by adding conditional probability distributions for these additional variables. This is the probabilistic analogue to non-negative tensor factorisation. == History == This is an example of a latent class model (see references therein), and it is related to non-negative matrix factorization. The present terminology was coined in 1999 by Thomas Hofmann.

  Read more →
• 

  Santa Fe Trail problem

  The Santa Fe Trail problem is a genetic programming exercise in which artificial ants search for food pellets according to a programmed set of instructions. The layout of food pellets in the Santa Fe Trail problem has become a standard for comparing different genetic programming algorithms and solutions. One method for programming and testing algorithms on the Santa Fe Trail problem is by using the NetLogo application. There is at least one case of a student creating a Lego robotic ant to solve the problem.

  Read more →
• 

  Yap (company)

  Yap Speech Cloud was a multimodal speech recognition system developed by American technology company Yap Inc. It offered a fully cloud-based speech-to-text transcription platform that was used by customers such as Microsoft. The Company was a contestant at the inaugural TechCrunch conference and was subsequently acquired by Amazon in September 2011 to help develop products such as Alexa Voice Service, Echo, and Fire TV.

  Read more →
• 

  Julia (programming language)

  Julia is a dynamic general-purpose programming language. As a high-level language, distinctive aspects of Julia's design include a type system with parametric polymorphism, the use of multiple dispatch as a core programming paradigm, just-in-time compilation and a parallel garbage collection implementation. Notably, Julia does not support classes with encapsulated methods but instead relies on the types of all of a function's arguments to determine which method will be called. By default, Julia is run similarly to scripting languages, using its runtime, and allows for interactions, but Julia programs can also be compiled to small binary standalone executables (or to small libraries for e.g. Python), with e.g. the JuliaC.jl compiler. Julia programs can reuse libraries from other languages, and vice versa. Julia has interoperability with C, C++, Fortran, Rust, Python, and R. Additionally, some Julia packages have bindings to be used from Python and R as libraries. Julia is supported by programmer tools like IDEs (see below) and by notebooks like Pluto.jl, Jupyter, and since 2025, Google Colab officially supports Julia natively. Julia is sometimes used in embedded systems (e.g. has been used in a satellite in space on a Raspberry Pi Compute Module 4; 64-bit Pis work best with Julia, and Julia is supported in Raspbian). == History == Work on Julia began in 2009, when Jeff Bezanson, Stefan Karpinski, Viral B. Shah, and Alan Edelman set out to create a free language that was both high-level and fast. On 14 February 2012, the team launched a website with a blog post explaining the language's mission. In an interview with InfoWorld in April 2012, Karpinski said about the name of the language, Julia: "There's no good reason, really. It just seemed like a pretty name." Bezanson said he chose the name on the recommendation of a friend, then years later wrote: Maybe julia stands for "Jeff's uncommon lisp is automated"? Julia's syntax is stable, since version 1.0 in 2018, and Julia has a backward compatibility guarantee for 1.x and also a stability promise for the documented (stable) API, while in the years before in the early development prior to 0.7 the syntax (and semantics) was changed in new versions. All of the (registered package) ecosystem uses the new and improved syntax, and in most cases relies on new APIs that have been added regularly, and in some cases minor additional syntax added in a forward compatible way e.g. in Julia 1.7. In the 10 years since the 2012 launch of pre-1.0 Julia, the community has grown. The Julia package ecosystem has over 11.8 million lines of code (including docs and tests). The JuliaCon academic conference for Julia users and developers has been held annually since 2014 with JuliaCon2020 welcoming over 28,900 unique viewers, and then JuliaCon2021 breaking all previous records (with more than 300 JuliaCon2021 presentations available for free on YouTube, up from 162 the year before), and 43,000 unique viewers during the conference. Three of the Julia co-creators are the recipients of the 2019 James H. Wilkinson Prize for Numerical Software (awarded every four years) "for the creation of Julia, an innovative environment for the creation of high-performance tools that enable the analysis and solution of computational science problems." Also, Alan Edelman, professor of applied mathematics at MIT, has been selected to receive the 2019 IEEE Computer Society Sidney Fernbach Award "for outstanding breakthroughs in high-performance computing, linear algebra, and computational science and for contributions to the Julia programming language." Version 0.3 was released in August 2014. Both Julia 0.7 and version 1.0 were released on 8 August 2018. Julia 1.4 added syntax for generic array indexing to handle e.g. 0-based arrays. The memory model was also changed. Julia 1.5 released in August 2020 added record and replay debugging support, for Mozilla's rr tool. The release changed the behavior in the REPL (to soft scope) to the one used in Jupyter, but keeps full compatible with non-REPL code (that retains hard scope). Julia 1.6 was the largest release since 1.0, and it was the long-term support (LTS) version for the longest time. Since Julia 1.7 development is back to time-based releases, and it was released in November 2021 with e.g. a new default random-number generator and Julia 1.7.3 fixed at least one security issue. Julia 1.8 added options for hiding source code when compiling Julia source code to executables. Julia 1.9 has added the ability to precompile packages to native machine code, done automatically; to improve precompilation of packages a new package PrecompileTools.jl was introduced, for use by package developers. Julia 1.10 was released on 25 December 2023 with new features such as parallel garbage collection. Julia 1.11 was released on 7 October 2024, and with it 1.10.5 became the next long-term support (LTS) version (i.e. those became the only two supported versions), since replaced by 1.10.10 released on 27 June, and 1.6 is no longer an LTS version. Julia 1.11 adds e.g. the new public keyword to signal safe public API (Julia users are advised to use such API, not internals, of Julia or packages, and package authors advised to use the keyword, generally indirectly, e.g. prefixed with the @compat macro, from Compat.jl, to also support older Julia versions, at least the LTS version). Julia 1.12 was released on 7 October 2025 (and 1.12.5 on 9 February 2026), and with it a JuliaC.jl package including the juliac compiler that works with it, for making rather small binary executables (much smaller than was possible before; through the use of new so-called trimming feature). Julia 1.10 LTS is an officially still-supported branch, but the 1.11 branch has also been maintained after 1.12 release, with 1.11.8 released and then 1.11.9 released on 8 February 2026. === JuliaCon === Since 2014, the Julia Community has hosted an annual Julia Conference focused on developers and users. The first JuliaCon took place in Chicago and kickstarted the annual occurrence of the conference. Since 2014, the conference has taken place across a number of locations including MIT and the University of Maryland, Baltimore. The event audience has grown from a few dozen people to over 28,900 unique attendees during JuliaCon 2020, which took place virtually. JuliaCon 2021 also took place virtually with keynote addresses from professors William Kahan, the primary architect of the IEEE 754 floating-point standard (which virtually all CPUs and languages, including Julia, use), Jan Vitek, Xiaoye Sherry Li, and Soumith Chintala, a co-creator of PyTorch. JuliaCon grew to 43,000 unique attendees and more than 300 presentations (still freely accessible, plus for older years). JuliaCon 2022 will also be virtual held between July 27 and July 29, 2022, for the first time in several languages, not just in English. === Sponsors === The Julia language became a NumFOCUS fiscally sponsored project in 2014 in an effort to ensure the project's long-term sustainability. Jeremy Kepner at MIT Lincoln Laboratory was the founding sponsor of the Julia project in its early days. In addition, funds from the Gordon and Betty Moore Foundation, the Alfred P. Sloan Foundation, Intel, and agencies such as NSF, DARPA, NIH, NASA, and FAA have been essential to the development of Julia. Mozilla, the maker of Firefox web browser, with its research grants for H1 2019, sponsored "a member of the official Julia team" for the project "Bringing Julia to the Browser", meaning to Firefox and other web browsers. The Julia language is also supported by individual donors on GitHub. === The Julia company === JuliaHub, Inc. was founded in 2015 as Julia Computing, Inc. by Viral B. Shah, Deepak Vinchhi, Alan Edelman, Jeff Bezanson, Stefan Karpinski and Keno Fischer. In June 2017, Julia Computing raised US$4.6 million in seed funding from General Catalyst and Founder Collective, the same month was "granted $910,000 by the Alfred P. Sloan Foundation to support open-source Julia development, including $160,000 to promote diversity in the Julia community", and in December 2019 the company got $1.1 million funding from the US government to "develop a neural component machine learning tool to reduce the total energy consumption of heating, ventilation, and air conditioning (HVAC) systems in buildings". In July 2021, Julia Computing announced they raised a $24 million Series A round led by Dorilton Ventures, which also owns Formula One team Williams Racing, that partnered with Julia Computing. Williams' Commercial Director said: "Investing in companies building best-in-class cloud technology is a strategic focus for Dorilton and Julia's versatile platform, with revolutionary capabilities in simulation and modelling, is hugely relevant to our business. We look forward to embedding Julia Computing in the world's most technologically advanced sport". In June 2023, JuliaHub received (again, now

  Read more →
• 

  Jubatus

  Jubatus is an open-source online machine learning and distributed computing framework developed at Nippon Telegraph and Telephone and Preferred Infrastructure. Its features include classification, recommendation, regression, anomaly detection and graph mining. It supports many client languages, including C++, Java, Ruby and Python. It uses Iterative Parameter Mixture for distributed machine learning. == Notable Features == Jubatus supports: Multi-classification algorithms: Perceptron Passive Aggressive Confidence Weighted Adaptive Regularization of Weight Vectors Normal Herd Recommendation algorithms using: Inverted index Minhash Locality-sensitive hashing Regression algorithms: Passive Aggressive feature extraction method for natural language: n-gram Text segmentation

  Read more →
• 

  Margin classifier

  In machine learning (ML), a margin classifier is a type of classification model which is able to give an associated distance from the decision boundary for each data sample. For instance, if a linear classifier is used, the distance (typically Euclidean, though others may be used) of a sample from the separating hyperplane is the margin of that sample. The notion of margins is important in several ML classification algorithms, as it can be used to bound the generalization error of these classifiers. These bounds are frequently shown using the VC dimension. The generalization error bound in boosting algorithms and support vector machines is particularly prominent. == Margin for boosting algorithms == The margin for an iterative boosting algorithm given a dataset with two classes can be defined as follows: the classifier is given a sample pair ( x , y ) {\displaystyle (x,y)} , where x ∈ X {\displaystyle x\in X} is a domain space and y ∈ Y = { − 1 , + 1 } {\displaystyle y\in Y=\{-1,+1\}} is the sample's label. The algorithm then selects a classifier h j ∈ C {\displaystyle h_{j}\in C} at each iteration j {\displaystyle j} where C {\displaystyle C} is a space of possible classifiers that predict real values. This hypothesis is then weighted by α j ∈ R {\displaystyle \alpha _{j}\in R} as selected by the boosting algorithm. At iteration t {\displaystyle t} , the margin of a sample x {\displaystyle x} can thus be defined as y ∑ j t α j h j ( x ) ∑ | α j | . {\displaystyle {\frac {y\sum _{j}^{t}\alpha _{j}h_{j}(x)}{\sum |\alpha _{j}|}}.} By this definition, the margin is positive if the sample is labeled correctly, or negative if the sample is labeled incorrectly. This definition may be modified and is not the only way to define the margin for boosting algorithms. However, there are reasons why this definition may be appealing. == Examples of margin-based algorithms == Many classifiers can give an associated margin for each sample. However, only some classifiers utilize information of the margin while learning from a dataset. Many boosting algorithms rely on the notion of a margin to assign weight to samples. If a convex loss is utilized (as in AdaBoost or LogitBoost, for instance) then a sample with a higher margin will receive less (or equal) weight than a sample with a lower margin. This leads the boosting algorithm to focus weight on low-margin samples. In non-convex algorithms (e.g., BrownBoost), the margin still dictates the weighting of a sample, though the weighting is non-monotone with respect to the margin. == Generalization error bounds == One theoretical motivation behind margin classifiers is that their generalization error may be bound by the algorithm parameters and a margin term. An example of such a bound is for the AdaBoost algorithm. Let S {\displaystyle S} be a set of m {\displaystyle m} data points, sampled independently at random from a distribution D {\displaystyle D} . Assume the VC-dimension of the underlying base classifier is d {\displaystyle d} and m ≥ d ≥ 1 {\displaystyle m\geq d\geq 1} . Then, with probability 1 − δ {\displaystyle 1-\delta } , we have the bound: P D ( y ∑ j t α j h j ( x ) ∑ | α j | ≤ 0 ) ≤ P S ( y ∑ j t α j h j ( x ) ∑ | α j | ≤ θ ) + O ( 1 m d log 2 ⁡ ( m / d ) / θ 2 + log ⁡ ( 1 / δ ) ) {\displaystyle P_{D}\left({\frac {y\sum _{j}^{t}\alpha _{j}h_{j}(x)}{\sum |\alpha _{j}|}}\leq 0\right)\leq P_{S}\left({\frac {y\sum _{j}^{t}\alpha _{j}h_{j}(x)}{\sum |\alpha _{j}|}}\leq \theta \right)+O\left({\frac {1}{\sqrt {m}}}{\sqrt {d\log ^{2}(m/d)/\theta ^{2}+\log(1/\delta )}}\right)} for all θ > 0 {\displaystyle \theta >0} .

  Read more →
• 

  ImageMixer

  ImageMixer is a brand name of video editing software that edits digital video and still image in camcorders and authors to VCD and DVD. It is a second-party Japanese product, distributed by Pixela Corporation, a Japanese manufacturer of PC peripheral hardware and multimedia software. == Bundling == ImageMixer is widely used for several camcorder brands, such as JVC, Hitachi and Canon. Also, Sony has chosen to package ImageMixer with its DVD and HDD Handycam. == ImageMixer series == ImageMixer has other series of software for digital camera, such as ImageMixer Label Maker and ImageMixer DVD dubbing. ImageMixer also has movie editing solution for Macintosh. == Windows Vista version of ImageMixer == A Windows Vista version of ImageMixer has been developed (ImageMixer3).

  Read more →
• 

  Log-linear model

  A log-linear model is a mathematical model that takes the form of a function whose logarithm equals a linear combination of the parameters of the model, which makes it possible to apply (possibly multivariate) linear regression. That is, it has the general form exp ⁡ ( c + ∑ i w i f i ( X ) ) {\displaystyle \exp \left(c+\sum _{i}w_{i}f_{i}(X)\right)} , in which the fi(X) are quantities that are functions of the variable X, in general a vector of values, while c and the wi stand for the model parameters. The term may specifically be used for: A log-linear plot or graph, which is a type of semi-log plot. Poisson regression for contingency tables, a type of generalized linear model. The specific applications of log-linear models are where the output quantity lies in the range 0 to ∞, for values of the independent variables X, or more immediately, the transformed quantities fi(X) in the range −∞ to +∞. This may be contrasted to logistic models, similar to the logistic function, for which the output quantity lies in the range 0 to 1. Thus the contexts where these models are useful or realistic often depends on the range of the values being modelled.

  Read more →
• 

  Causal Markov condition

  The Causal Markov (CM) condition states that, conditional on the set of all its direct causes, a node is independent of all variables which are not effects or direct causes of that node. In the event that the structure of a Bayesian network accurately depicts causality, the two conditions are equivalent. This is related to the Markov condition, an assumption made in Bayesian probability theory, that every node in a Bayesian network is conditionally independent of its nondescendants, given its parents. Stated loosely, it is assumed that a node has no bearing on nodes which do not descend from it. In a DAG, this local Markov condition is equivalent to the global Markov condition, which states that d-separations in the graph also correspond to conditional independence relations. This also means that a node is conditionally independent of the entire network, given its Markov blanket. A network may accurately embody the Markov condition without depicting causality, in which case it should not be assumed to embody the causal Markov condition. == Motivation == Statisticians are enormously interested in the ways in which certain events and variables are connected. The precise notion of what constitutes a cause and effect is necessary to understand the connections between them. The central idea behind the philosophical study of probabilistic causation is that causes raise the probabilities of their effects, all else being equal. A deterministic interpretation of causation means that if A causes B, then A must always be followed by B. In this sense, smoking does not cause cancer because some smokers never develop cancer. On the other hand, a probabilistic interpretation simply means that causes raise the probability of their effects. In this sense, changes in meteorological readings associated with a storm do cause that storm, since they raise its probability. (However, simply looking at a barometer does not change the probability of the storm, for a more detailed analysis, see:). == Examples == In a simple view, releasing one's hand from a hammer causes the hammer to fall. However, doing so in outer space does not produce the same outcome, calling into question if releasing one's fingers from a hammer always causes it to fall. A causal graph could be created to acknowledge that both the presence of gravity and the release of the hammer contribute to its falling. However, it would be very surprising if the surface underneath the hammer affected its falling. This essentially states the Causal Markov Condition, that given the existence of gravity the release of the hammer, it will fall regardless of what is beneath it. == Implications == === Dependence and Causation === It follows from the definition that if X and Y are in V and are probabilistically dependent, then either X causes Y, Y causes X, or X and Y are both effects of some common cause Z in V. This definition was seminally introduced by Hans Reichenbach as the Common Cause Principle (CCP). === Screening === It once again follows from the definition that the parents of X screen X from other "indirect causes" of X (parents of Parents(X)) and other effects of Parents(X) which are not also effects of X.

  Read more →