AI Art Creator Free

AI Art Creator Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Meta-learning (computer science)

    Meta-learning (computer science)

    Meta-learning is a subfield of machine learning where automatic learning algorithms are applied to metadata about machine learning experiments. As of 2017, the term had not found a standard interpretation, however the main goal is to use such metadata to understand how automatic learning can become flexible in solving learning problems, hence to improve the performance of existing learning algorithms or to learn (induce) the learning algorithm itself, hence the alternative term learning to learn. Flexibility is important because each learning algorithm is based on a set of assumptions about the data, its inductive bias. This means that it will only learn well if the bias matches the learning problem. A learning algorithm may perform very well in one domain, but not on the next. This poses strong restrictions on the use of machine learning or data mining techniques, since the relationship between the learning problem (often some kind of database) and the effectiveness of different learning algorithms is not yet understood. By using different kinds of metadata, like properties of the learning problem, algorithm properties (like performance measures), or patterns previously derived from the data, it is possible to learn, select, alter or combine different learning algorithms to effectively solve a given learning problem. Critiques of meta-learning approaches bear a strong resemblance to the critique of metaheuristic, a possibly related problem. A good analogy to meta-learning, and the inspiration for Jürgen Schmidhuber's early work (1987) and Yoshua Bengio et al.'s work (1991), considers that genetic evolution learns the learning procedure encoded in genes and executed in each individual's brain. In an open-ended hierarchical meta-learning system using genetic programming, better evolutionary methods can be learned by meta evolution, which itself can be improved by meta meta evolution, etc. == Definition == A proposed definition for a meta-learning system combines three requirements: The system must include a learning subsystem. Experience is gained by exploiting meta knowledge extracted in a previous learning episode on a single dataset, or from different domains. Learning bias must be chosen dynamically. Bias refers to the assumptions that influence the choice of explanatory hypotheses and not the notion of bias represented in the bias-variance dilemma. Meta-learning is concerned with two aspects of learning bias. Declarative bias specifies the representation of the space of hypotheses, and affects the size of the search space (e.g., represent hypotheses using linear functions only). Procedural bias imposes constraints on the ordering of the inductive hypotheses (e.g., preferring smaller hypotheses). == Common approaches == There are three common approaches: using (cyclic) networks with external or internal memory (model-based) learning effective distance metrics (metrics-based) explicitly optimizing model parameters for fast learning (optimization-based). === Model-Based === Model-based meta-learning models updates its parameters rapidly with a few training steps, which can be achieved by its internal architecture or controlled by another meta-learner model. ==== Memory-Augmented Neural Networks ==== A Memory-Augmented Neural Network, or MANN for short, is claimed to be able to encode new information quickly and thus to adapt to new tasks after only a few examples. ==== Meta Networks ==== Meta Networks (MetaNet) learns a meta-level knowledge across tasks and shifts its inductive biases via fast parameterization for rapid generalization. === Metric-Based === The core idea in metric-based meta-learning is similar to nearest neighbors algorithms, which weight is generated by a kernel function. It aims to learn a metric or distance function over objects. The notion of a good metric is problem-dependent. It should represent the relationship between inputs in the task space and facilitate problem solving. ==== Convolutional Siamese Neural Network ==== Siamese neural network is composed of two twin networks whose output is jointly trained. There is a function above to learn the relationship between input data sample pairs. The two networks are the same, sharing the same weight and network parameters. ==== Matching Networks ==== Matching Networks learn a network that maps a small labelled support set and an unlabelled example to its label, obviating the need for fine-tuning to adapt to new class types. ==== Relation Network ==== The Relation Network (RN), is trained end-to-end from scratch. During meta-learning, it learns to learn a deep distance metric to compare a small number of images within episodes, each of which is designed to simulate the few-shot setting. ==== Prototypical Networks ==== Prototypical Networks learn a metric space in which classification can be performed by computing distances to prototype representations of each class. Compared to recent approaches for few-shot learning, they reflect a simpler inductive bias that is beneficial in this limited-data regime, and achieve satisfied results. === Optimization-Based === What optimization-based meta-learning algorithms intend for is to adjust the optimization algorithm so that the model can be good at learning with a few examples. ==== LSTM Meta-Learner ==== LSTM-based meta-learner is to learn the exact optimization algorithm used to train another learner neural network classifier in the few-shot regime. The parametrization allows it to learn appropriate parameter updates specifically for the scenario where a set amount of updates will be made, while also learning a general initialization of the learner (classifier) network that allows for quick convergence of training. ==== Temporal Discreteness ==== Model-Agnostic Meta-Learning (MAML) is a fairly general optimization algorithm, compatible with any model that learns through gradient descent. ==== Reptile ==== Reptile is a remarkably simple meta-learning optimization algorithm, given that both of its components rely on meta-optimization through gradient descent and both are model-agnostic. == Examples == Some approaches which have been viewed as instances of meta-learning: Recurrent neural networks (RNNs) are universal computers. In 1993, Jürgen Schmidhuber showed how "self-referential" RNNs can in principle learn by backpropagation to run their own weight change algorithm, which may be quite different from backpropagation. In 2001, Sepp Hochreiter & A.S. Younger & P.R. Conwell built a successful supervised meta-learner based on Long short-term memory RNNs. It learned through backpropagation a learning algorithm for quadratic functions that is much faster than backpropagation. Researchers at Deepmind (Marcin Andrychowicz et al.) extended this approach to optimization in 2017. In the 1990s, Meta Reinforcement Learning or Meta RL was achieved in Schmidhuber's research group through self-modifying policies written in a universal programming language that contains special instructions for changing the policy itself. There is a single lifelong trial. The goal of the RL agent is to maximize reward. It learns to accelerate reward intake by continually improving its own learning algorithm which is part of the "self-referential" policy. An extreme type of Meta Reinforcement Learning is embodied by the Gödel machine, a theoretical construct which can inspect and modify any part of its own software which also contains a general theorem prover. It can achieve recursive self-improvement in a provably optimal way. Model-Agnostic Meta-Learning (MAML) was introduced in 2017 by Chelsea Finn et al. Given a sequence of tasks, the parameters of a given model are trained such that few iterations of gradient descent with few training data from a new task will lead to good generalization performance on that task. MAML "trains the model to be easy to fine-tune." MAML was successfully applied to few-shot image classification benchmarks and to policy-gradient-based reinforcement learning. Variational Bayes-Adaptive Deep RL (VariBAD) was introduced in 2019. While MAML is optimization-based, VariBAD is a model-based method for meta reinforcement learning, and leverages a variational autoencoder to capture the task information in an internal memory, thus conditioning its decision making on the task. When addressing a set of tasks, most meta learning approaches optimize the average score across all tasks. Hence, certain tasks may be sacrificed in favor of the average score, which is often unacceptable in real-world applications. By contrast, Robust Meta Reinforcement Learning (RoML) focuses on improving low-score tasks, increasing robustness to the selection of task. RoML works as a meta-algorithm, as it can be applied on top of other meta learning algorithms (such as MAML and VariBAD) to increase their robustness. It is applicable to both supervised meta learning and meta reinforcement learning. Discovering meta-knowledge works by inducing knowledge

    Read more →
  • Moving object detection

    Moving object detection

    Moving object detection is a technique used in computer vision and image processing. Multiple consecutive frames from a video are compared by various methods to determine if any moving object is detected. Moving objects detection has been used for wide range of applications like video surveillance, activity recognition, road condition monitoring, airport safety, monitoring of protection along marine border, etc. == Definition == Moving object detection is to recognize the physical movement of an object in a given place or region. By acting segmentation among moving objects and stationary area or region, the moving objects' motion can be tracked and thus analyzed later. To achieve this, consider a video is a structure built upon single frames, moving object detection is to find the foreground moving target(s), either in each video frame or only when the moving target shows the first appearance in the video. == Traditional methods == Among all the traditional moving object detection methods, we could categorize them into four major approaches: Background subtraction, Frame differencing, Temporal Differencing, and Optical Flow. === Frame differencing === Instead of using traditional approach, to use image subtraction operator by subtracting second and images afterwards, the frame differencing method makes comparisons between two successive frames to detect moving targets. === Temporal differencing === The temporal differencing method identifies the moving object by applying pixel-wise difference method with two or three consecutive frames.

    Read more →
  • Automation engineering

    Automation engineering

    Automation engineering is a branch of engineering that deals with the development of methods and facilities that replace, in whole or in part, manual labour related to the control and monitoring of systems and processes. == Automation engineer == Automation engineers are experts who have the knowledge and ability to design, create, develop and manage machines and systems, for example, factory automation, process automation and warehouse automation. Automation technicians are also involved. == Scope == Automation engineering is the integration of standard engineering fields. Automatic control of various control systems for operating various systems or machines to reduce human efforts & time to increase accuracy. Automation engineers design and service electromechanical devices and systems for high-speed robotics and programmable logic controllers (PLCs). == Work and career after graduation == Graduates can work for both government and private sector entities such as industrial production, and companies that create and use automation systems, for example, the paper industry, automotive industry, metallurgical industry, food and agricultural industry, water treatment, and oil & gas sectors such as refineries, rolling mills, and power plants. == Job description == Automation engineers can design, program, simulate and test automated machinery and processes, and are usually employed in industries such as the energy sector in plants, car manufacturing facilities, food processing plants, and robots. Automation engineers are responsible for creating detailed design specifications and other documents, developing automation based on specific requirements for the process involved, and conforming to international standards like IEC-61508, local standards, and other process-specific guidelines and specifications, simulating, testing, and commissioning electronic equipment for automation.

    Read more →
  • Luma (video)

    Luma (video)

    In video, luma ( Y ′ {\displaystyle Y'} ) represents the brightness in an image (the "black-and-white" or achromatic portion of the image). Luma is typically paired with chroma. Luma represents the achromatic image, while the chroma components represent the color information. Converting R′G′B′ sources (such as the output of a three-CCD camera) into luma and chroma allows for chroma subsampling: because human vision has finer spatial sensitivity to luminance ("black and white") differences than chromatic differences, video systems can store and transmit chromatic information at lower resolution, optimizing perceived detail at a particular bandwidth. == Luma versus relative luminance == Luma is the weighted sum of gamma-compressed R′G′B′ components of a color video—the prime symbols ′ denote gamma compression. The word was proposed to prevent confusion between luma as implemented in video engineering and relative luminance as used in color science (i.e. as defined by CIE). Relative luminance is formed as a weighted sum of linear RGB components, not gamma-compressed ones. Even so, luma is sometimes erroneously called luminance. SMPTE EG 28 recommends the symbol Y ′ {\displaystyle Y'} to denote luma and the symbol Y {\displaystyle Y} to denote relative luminance. === Use of relative luminance === While luma is more often encountered, relative luminance is sometimes used in video engineering when referring to the brightness of a monitor. The formula used to calculate relative luminance uses coefficients based on the CIE color matching functions and the relevant standard chromaticities of red, green, and blue (e.g., the original NTSC primaries, SMPTE C, or Rec. 709). For the Rec. 709 (and sRGB) primaries, the linear combination, based on pure colorimetric considerations and the definition of relative luminance is: Y = 0.2126 R + 0.7152 G + 0.0722 B {\displaystyle Y=0.2126R+0.7152G+0.0722B} The formula used to calculate luma in the Rec. 709 spec arbitrarily also uses these same coefficients, but with gamma-compressed components: Y ′ = 0.2126 R ′ + 0.7152 G ′ + 0.0722 B ′ , {\displaystyle Y'=0.2126R'+0.7152G'+0.0722B',} where the prime symbol ′ denotes gamma compression. == Rec. 601 luma versus Rec. 709 luma coefficients == For digital formats following CCIR 601 (i.e. most digital standard definition formats), luma is calculated with this formula: Y 601 ′ = 0.299 R ′ + 0.587 G ′ + 0.114 B ′ {\displaystyle Y'_{\text{601}}=0.299R'+0.587G'+0.114B'} Formats following ITU-R Recommendation BT. 709 (i.e. most digital high definition formats) use a different formula: Y 709 ′ = 0.2126 R ′ + 0.7152 G ′ + 0.0722 B ′ {\displaystyle Y'_{\text{709}}=0.2126R'+0.7152G'+0.0722B'} Modern HDTV systems use the 709 coefficients, while transitional 1035i HDTV (MUSE) formats may use the SMPTE 240M coefficients: Y 240 ′ = 0.212 R ′ + 0.701 G ′ + 0.087 B ′ = Y 145 ′ {\displaystyle Y'_{\text{240}}=0.212R'+0.701G'+0.087B'=Y'_{\text{145}}} These coefficients correspond to the SMPTE RP 145 primaries (also known as "SMPTE C") in use at the time the standard was created. The change in the luma coefficients is to provide the "theoretically correct" coefficients that reflect the corresponding standard chromaticities ('colors') of the primaries red, green, and blue. However, there is some controversy regarding this decision. The difference in luma coefficients requires that component signals must be converted between Rec. 601 and Rec. 709 to provide accurate colors. In consumer equipment, the matrix required to perform this conversion may be omitted (to reduce cost), resulting in inaccurate color. == Luma and luminance errors == As well, the Rec. 709 luma coefficients may not necessarily provide better performance. Because of the difference between luma and relative luminance, luma does not exactly represent the luminance in an image. As a result, errors in chroma can affect luminance. Luma alone does not perfectly represent luminance; accurate luminance requires both accurate luma and chroma. Hence, errors in chroma "bleed" into the luminance of an image. Note the bleeding in lightness near the borders. Due to the widespread usage of chroma subsampling, errors in chroma typically occur when it is lowered in resolution/bandwidth. This lowered bandwidth, coupled with high frequency chroma components, can cause visible errors in luminance. An example of a high frequency chroma component would be the line between the green and magenta bars of the SMPTE color bars test pattern. Error in luminance can be seen as a dark band that occurs in this area.

    Read more →
  • Video renderer

    Video renderer

    A video renderer is software that processes a video file and sends it sequentially to the video display controller card for display on a computer screen. An example of a video renderer, is the VMR-7 that was used by Microsoft's DirectShow. An example of a UNIX video renderer is the one container within GStreamer. Commonly used video renderers are: Enhanced Video Renderer VMR9 Renderless Haali's Video Renderer Madvr Video Renderer JRVR, a part of JRiver Media Center

    Read more →
  • Continuous Function Chart

    Continuous Function Chart

    A Continuous Function Chart (CFC) is a graphic editor that can be used in conjunction with the STEP 7 software package or with other tools, such as CODESYS. It is used to create the entire software structure of the CPU from ready-made blocks. When working with the editor, you place blocks on function charts, assign parameters to them, and interconnect them. Interconnecting means, for example, that values are transferred from one output to one or more inputs during communication between the blocks. Continuous function charts are basically used for controlling continuous processes, where all the logic is executed and outputs are calculated in each PLC scan. Whereas in SFC, execution will be sequential as done is batch processes.

    Read more →
  • YaDICs

    YaDICs

    YaDICs is a program written to perform digital image correlation on 2D and 3D tomographic images. The program was designed to be both modular, by its plugin strategy and efficient, by it multithreading strategy. It incorporates different transformations (Global, Elastic, Local), optimizing strategy (Gauss-Newton, Steepest descent), Global and/or local shape functions (Rigid-body motions, homogeneous dilatations, flexural and Brazilian test models)... == Theoretical background == === Context === In solid mechanics, digital image correlation is a tool that allows to identify the displacement field to register a reference image (called herein fixed image) to images during an experiment (mobile image). For example, it is possible to observe the face of a specimen with a painted speckle on it in order to determine its displacement fields during a tensile test. Before the appearance of such methods, researchers usually used strain gauges to measure the mechanical state of the material but strain gauges only measure the strain on a point and don't allow to understand material with an heterogeneous behavior. One can obtain a full in plane strain tensor by derivation of the displacement fields. Many methods are based upon the optical flow. In fluid mechanics a similar method is used, called Particle Image Velocimetry (PIV); the algorithms are similar to those of DIC but it is impossible to ensure that the optical flow is conserved so a vast majority of the software used the normalized cross correlation metric. In mechanics the displacement or velocity fields are the only concern, registering images is just a side effect. There is another process called image registration using the same algorithms (on monomodal images) but where the goal is to register images and thereby identifying the displacement field is just a side effect. YaDICs uses the general principle of image registration with a particular attention to the displacement fields basis. === Image registration principle === YaDICs can be explained using the classical image registration framework: === Image registration general scheme === The common idea of image registration and digital image correlation is to find the transformation between a fixed image and a moving one for a given metric using an optimization scheme. While there are many methods to achieve such a goal, Yadics focuses on registering images with the same modality. The idea behind the creation of this software is to be able to process data that comes from a μ-tomograph; i.e.: data cube over 10003 voxels. With such a size it is not possible to use naive approach usually used in a two-dimensional context. In order to get sufficient performances OpenMP parallelism is used and data are not globally stored in memory. As an extensive description of the different algorithms is given in. === Sampling === Contrary to image registration, Digital Image Correlation targets the transformation, one wants to extracted the most accurate transformation from the two images and not just match the images. Yadics uses the whole image as a sampling grid: it is thus a total sampling. === Interpolator === It is possible to choose between bilinear interpolation and bicubic interpolation for the grey level evaluation at non integer coordinates. The bi-cubic interpolation is the recommended one. === Metrics === ==== Sum of squared differences (SSD) ==== The SSD is also known as mean squared error. The equation below defines the SSD metric: S S D ( μ , I F , I M ) = 1 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) 2 , {\displaystyle SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {1}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)^{2},} where I F {\displaystyle {\mathcal {I_{F}}}} is the fixed image, I M {\displaystyle {\mathcal {I_{M}}}} the moving one, Ω F {\displaystyle \Omega _{F}} the integration area | Ω F | {\displaystyle \left|\Omega _{F}\right|} the number of pi(vo)xels (cardinal) and T μ {\displaystyle {T}_{\mu }} the transformation parametrized by μ The transformation can be written as: T μ ( x ) = x + { Φ ( x ) } t { μ } . {\displaystyle T_{\mu }(x)=x+\left\{\Phi (x)\right\}^{t}\left\{\mu \right\}.} This metric is the main one used in the YaDICs as it works well with same modality images. One has to find the minimum of this metric ==== Normalized cross-correlation ==== The normalized cross-correlation (NCC) is used when one cannot assure the optical flow conservation; it happens in case of change of lighting or if particles disappear from the scene can occur in particle images velocimetry (PIV). The NCC is defined by: N C C ( μ , I F , I M ) = ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) ( I M ( T μ ( x i ) ) − I M ¯ ) ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) 2 ∑ x i ∈ Ω F ( I M ( T μ ( x i ) ) − I M ¯ ) 2 , {\displaystyle NCC(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)}{\sqrt {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)^{2}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)^{2}}}},} where I F ¯ {\displaystyle {\overline {\mathcal {I_{F}}}}} and I M ¯ {\displaystyle {\overline {\mathcal {I_{M}}}}} are the mean values of the fixed and mobile images. This metric is only used to find local translation in Yadics. This metric with translation transform can be solved using cross-correlation methods, which are non iterative and can be accelerated using Fast Fourier Transform . === Classification of transformations === There are three categories of parametrization: elastic, global and local transformation. The elastic transformations respect the partition of unity, there are no holes created or surfaces counted several times. This is commonly used in Image Registration by the use of B-Spline functions and in solid mechanics with finite element basis. The global transformations are defined on the whole picture using rigid body or affine transformation (which is equivalent to homogeneous strain transformation). More complex transformations can be defined such as mechanically based one. These transformations have been used for stress intensity factor identification by and for rod strain by. The local transformation can be considered as the same global transformation defined on several Zone Of Interest (ZOI) of the fixed image. ==== Global ==== Several global transforms have been implemented: Rigid and homogeneous (Tx,Ty,Rz in 2D; Tx,Ty,Tz,Rx,Ry,Rz,Exx,Eyy,Ezz,Eyz,Exz,Exy in 3D) Brazilian (Only in 2D), Dynamic Flexion, ==== Elastic ==== First-order quadrangular finite elements Q4P1 are used in Yadics. ===== Local ===== Every global transform can be used on a local mesh. === Optimization === The YaDICs optimization process follows a gradient descent scheme. The first step is to compute the gradient of the metric regarding the transform parameters ∂ S S D ( μ , I F , I M ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ∂ I M ( T μ ( x i ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ( ∂ T μ ( x i ) ∂ μ ) t ∂ I M ( T μ ( x i ) ) ∂ x {\displaystyle {\begin{array}{lcl}{\dfrac {\partial SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right){\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i})}{\partial \mu }}\\&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)\left({\dfrac {\partial {T}_{\mu }(x_{i})}{\partial \mu }}\right)^{t}{\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i}))}{\partial x}}\\\end{array}}} ==== Gradient method ==== Once the metric gradient has been computed, one has to find an optimization strategy The gradient method principle is explained below: μ k + 1 = μ k + α k d k {\displaystyle \mu _{k+1}=\mu _{k}+\alpha _{k}d_{k}} The gradient step can be constant or updated at every iteration. d k = − γ k ∂ C ( μ , I F , I M ) ∂ μ {\displaystyle d_{k}=-\gamma _{k}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}} , γ k {\displaystyle \gamma _{k}} allows one to choose between the following methods : γ k {\displaystyle \gamma _{k}} ⟹ {\displaystyle \Longrightarrow } steepest descent, γ k = [ ∂ C ( μ , I F , I M ) ∂ μ ∂ C ( μ , I F , I M ) ∂ μ t ] − 1 {\displaystyle \gamma _{k}=\left[{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}^{t}\right]^{-1}} ⟹ {\displaystyle \Longrightarrow } Gauss-Newto

    Read more →
  • Construction robots

    Construction robots

    Construction robots are a subset of industrial robots used for building and infrastructure construction on site, or in the production of materials and components offsite. A 2021 survey said 55% of construction companies in the United States, Europe, and China used robots in some form. This figure, however, reflects reported use across the construction value chain rather than widespread deployment of robots on active construction sites. Real-world adoption remains limited, with many robotic systems confined to pilot projects, controlled environments, or specific task applications rather than continuous on-site construction use. One of the main challenges in deploying robots on construction sites is the unstructured and variable nature of the environment, which differs fundamentally from controlled factory settings where industrial robots have traditionally operated. Some robots currently deployed on job sites assist with physically demanding or repetitive tasks: excavating, lifting heavy materials, surveying, laying out markers, tying rebar, and installing drywall. More advanced systems are being developed for exterior finishing, steel placement, masonry, and reinforced concrete work. In practice, rather than autonomous systems performing core building tasks, the most widely adopted robot applications on construction sites involve technologies such as aerial drones (or, less frequently, robot 'dogs' - for example, Boston Dynamics' Spot - or humanoid robots) used for surveying, inspection, and progress monitoring (the robots typically carry video and/or 360-degree cameras, LiDar scanners or other data capture devices, with data analysed using artificial intelligence and machine learning). Some emerging systems are designed as multifunctional construction robots, integrating multiple tools and capabilities within a single robotic platform to perform different stages of the construction process. These systems aim to improve operational flexibility and increase automation in complex construction environments. Experimental projects using robotic construction technologies and additive manufacturing have been demonstrated in several countries as part of broader efforts to industrialize the construction sector and improve productivity through automation and digitalization. == Features == Construction robots are generally required to meet the following criteria: Mobility: the ability to navigate around a construction site, including uneven terrain and confined spaces. Adaptability: the ability to handle components of variable size, weight, and shape. Environmental awareness: the ability to sense and respond to changing on-site conditions. Interactivity: the ability to operate alongside human workers and other equipment. Multitasking: the ability to perform several different operations within a single deployment. == Capabilities == Construction robots have been developed and tested for a range of on-site tasks, including: Progress monitoring — robots equipped with cameras and sensors can track construction progress and identify deviations from plans. Inspection — robots are used to investigate infrastructure at dangerous or inaccessible locations, reducing risk to human workers and eliminating human error. Wall construction — robotic systems can lay bricks and blocks with greater speed and consistency than manual labour. Earthmoving and material handling — autonomous excavators and haul trucks use GPS, lidar, and motion sensors to perform digging, trenching, and loading tasks with minimal human input. Grading and dozing — autonomous bulldozers use GPS, gyroscopes, and laser sensors to control blade angle and depth, improving surface finish accuracy and reducing material overuse. 3D printing — additive manufacturing systems can construct walls and structural elements directly from digital models. == Notable construction-related activities undertaken by robots == The distribution of robotic applications in construction varies across the project lifecycle. Most applications are concentrated in structural construction tasks such as masonry, concrete work, and assembly, while other phases, including planning, maintenance, and demolition, remain less represented. === Automated building systems === The Nisseki Yokohama Building (also known as Rail City Yokohama), a 30-storey office building in Yokohama, Japan, was constructed between 1994 and 1997 using the SMART system (Shimizu Manufacturing system by Advanced Robotics Technology), developed by Shimizu Corporation and a consortium of seven other Japanese companies. The system used automated horizontal hoists and vertical lifts to position steel beams, columns, precast concrete floor slabs, and prefabricated facade panels, with welding robots connecting structural elements under laser-guided precision. Each component was tracked by barcode to monitor progress and coordinate just-in-time delivery of materials. Obayashi Corporation developed the Advanced Building Construction System (ABCS), a similar automated platform used in several high-rise projects in Japan in the 1990s, including the NEC Head Office in Kanagawa (1997–2000). === Progress monitoring, inspection === Boston Dynamics' Spot was used in February 2024 to inspect sections of the M5 motorway in England for National Highways. A £15,000 humanoid robot (a G1 model from Chinese manufacturer Unitree) was deployed to capture 360-degree imagery and progress reports to support health and safety monitoring and reporting for UK contractor Tilbury Douglas in April 2026. In the US, Virginia Tech's ARCADE research lab is developing MARIO (Multi-Agent Robotic system for Inspection On-site), a heterogenous robotic system deploying multiple robots capable of different locomotion to perform remote real-time construction progress monitoring in complex construction sites. === Earthmoving === === Concrete works === Obayashi Corporation developed and deployed a robotic system for placing concrete layers in dam construction in Japan. A concrete floor finishing robot was deployed by Kajima and Tokimec in Japan. The MARK series were designed in 1984 to automate the levelling and trowelling of concrete slabs on construction sites, providing consistent finishing accuracy, improved efficiency, and reduced dependence on skilled labour === Masonry === SAM100 (Semi-Automated Mason), developed by Construction Robotics, is one of the first commercially available bricklaying robots for on-site masonry construction. In 2018, it was used in the construction of the University Arts Building at the University of Nevada, Reno — a $35.5 million facility — where it laid over 60,000 of the 100,000 bricks required, reducing the brick veneer installation time by approximately 50%. Hadrian X, developed by the Australian company Fastbrick Robotics, is a fully autonomous mobile bricklaying robot. In November 2022, it completed its first commercial project — five four-bedroom houses in Wellard, Western Australia. In February 2025, PulteGroup, one of the largest homebuilders in the United States, piloted Hadrian X on a site in Florida, constructing an entire house in a single day. === 3D printing === In May 2025, a residential building in Arinaga, Gran Canaria, Spain, was completed using 3D printing construction technology, as part of broader efforts to demonstrate robotic and additive manufacturing methods in the housing sector. In 2026, a three-storey apartment block in France was constructed using concrete 3D printing technology, three months faster than conventional building methods. Finland's Hyperion Robotics has opened a UK factory and used 3D printing with concrete to produce foundations for pipelines and for electricity substation bases, reducing time-consuming and weather-dependent onsite construction processes. == Social impact == The adoption of construction robots varies significantly by region and is shaped by labour market conditions, cultural attitudes, and regulatory frameworks. In Japan, construction robots have been embraced as a response to an ageing workforce and chronic labour shortages, and are generally viewed positively by the industry. In the United States, adoption has historically been slower, partly due to resistance from labour unions concerned about job displacement. Research suggests that the impact of automation on workers is uneven: while robots can create a productivity effect that benefits some workers, displacement effects are most pronounced among younger, less-educated workers in manufacturing-heavy regions. More than 60% of construction firms now report difficulty finding skilled operators, which has increased openness to automation as a practical solution to workforce shortages rather than a replacement for workers. In the UK, during onsite deployment of a humanoid robot for monitoring purposes, there were concerns that staff might think they were being watched ("It's not there to spy on people.... So, we insist that everyone is blurred out. N

    Read more →
  • Logical Machine Corporation

    Logical Machine Corporation

    Logical Machine Corporation (LOMAC) was an American computer company active from the mid-1970s to the 1980s and based in the San Francisco Bay Area. It was founded as John Peers and Company by the British entrepreneur John Peers in 1974. LOMAC developed the ADAM, a minicomputer which ran a specialized compiler for the company's natural English programming language. Throughout the late 1970s, the company acquired several technology firms, including Byte, Inc., the owner of the Byte Shop retail chain. Despite its unique approach to computing and earning $5 million in revenue in 1977, LOMAC struggled as the industry began to standardize around the IBM Personal Computer (IBM PC). Following Peers's departure in 1980, the company rebranded as Logical Business Machines, Inc. (LBM, or simply Logical), and attempted to pivot toward IBM PC–compatible hardware. However, financial difficulties led to the company filing for Chapter 11 bankruptcy in 1984. After emerging from bankruptcy in 1985 with new investment, Logical ceased hardware manufacturing to focus exclusively on software development and value-added reselling. == History == John Peers (born 1942) founded Logical Machine Corporation as John Peers and Company in September 1974. The company originally occupied a 4,500-square-foot office in Burlingame, California. The company was Peers' fourth; he had recently sold off Allied Business Systems of London to Trafalgar House in 1974. Peers sought to set up manufacturing in an agricultural zone in Ukiah, California. Following a delay, caused in part by concerned residents, a 30,000-square-foot plant was raised in Burke Hill, three miles south of Ukiah. The Ukiah plant was built to mass manufacture the company's ADAM minicomputer. The ADAM computer ran a specialized compiler for the company's natural English programming language; that is to say, the programming language attempted to closely emulate English syntax. Prototypes of the ADAM were built in May 1974, based on specifications devised in October 1973. Peers had yet to patent the technology as of June 1975. The ADAM's central processing unit was bolted onto an 7-by-6-foot L-shaped desk, on which rested its terminal. Twenty units of the ADAM were installed between April 1975 and February 1976, out of a backlog of orders for 3,500 from 500 clients, manufactured out of the company's Burlingame headquarters. It cost US$40,000. A controversial print advertisement featuring a naked woman seated at an ADAM terminal—as a pastiche of Adam and Eve—was recalled in early 1976 as a result of outcry from the National Organization for Women. The company changed its name to Logical Machine Corporation (LOMAC) in October 1976 and moved its headquarters to a 26,000-square-foot building in Sunnyvale, California, in anticipation of a ramping up of orders for the ADAM. The company originally occupied half of the building; they later purchased the other half from the tenant in July 1977 to double its manufacturing output. For fiscal year 1977, the company earned $5 million in revenue. In December 1977, LOMAC acquired Byte, Inc.—the proprietor of The Byte Shop, the first computer retail chain—from Paul Terrell and Boyd Wilson for an unspecified amount. The Byte Shop had 65 locations in the San Francisco Bay Area in 1978; it catered mainly to hobbyists with low cost microcomputer kits, in contrast to the high cost of LOMAC's ADAM. By July 1978, however, LOMAC were able to reduce the price of the ADAM down to $15,000. The company by that point had shipped their 50th ADAM and expanded to 14 countries. Also in 1978, LOMAC acquired Mass Memory—a high-tech optical storage company based in Phoenix, Arizona, whose products had storage capacities on the order gigabytes and terabytes—and Centigram, makers of the Mike—a computer with speech recognition. Later that year, the company introduced Tina, a low-cost version of the ADAM. LOMAC suffered losses that year and appointed Jerry Brandt to the board of directions, naming him chief operating officer, in August 1978. Brandt had Logical absorb Mass Memory and Centigram into the parent operations, shutting down their respective plants in the process, converted 10 Byte Shops to franchises and opened 25 more franchised Byte locations, and stopped direct sales of LOMAC's business computer products. By the beginning of 1979, LOMAC was profitable once more, and Brandt was let go from LOMAC. Peers left LOMAC in 1980, following a slump in the company's sales. He became an executive director of the United States Robotics Society, a consortium for industrial automation companies, that year. Following Peers' departure, LOMAC changed its name to Logical Business Machines, adopting the name of its European subsidiary. In 1983, the company announced a 16-bit clone of the IBM PC, called the Logical L-XT, which featured a 10-MB hard drive, 320-KB floppy drive and 192 KB of RAM, and a real-time clock, and came shipped with various software (including MS-DOS, a word processor, and a spreadsheet application) and an amber CRT monitor. The following year, the company introduced L-NET, a local area network system based on the L-XT that could link up to 64 computers. L-NET came shipped with a natural programming language, Diplomat—a descendant of the programming language used on the ADAM. In June 1983, Logical sued Coleco Industries over trademark infringement with the latter's to-be-released Adam microcomputer. Logical cited confusion from their existing ADAM customer base caused by the announcement of the Coleco Adam as the basis for the suit. Coleco challenged Logical in the press, writing that Logical's rights to the Adam trademark for use in computers had lapsed earlier in the year. The two settled out of court, with Coleco agreeing to license the Adam name from Logical in exchange for unlimited rights to the Adam trademark. Logical halted development of the L-XT when they filed for Chapter 11 bankruptcy in July 1984. The company had been $4 million in debt. They emerged from bankruptcy in September 1985, after being infused with $2 million from Carat Ltd. The latter immediately received a little less than 50 percent ownership in Logical—this stake set to grow to over 50 percent over the next six months. As part of the terms of exiting bankruptcy, Logical stopped manufacturing hardware and strictly became a software development company and value-added reseller of computer systems.

    Read more →
  • Verbal overshadowing

    Verbal overshadowing

    Verbal overshadowing is a phenomenon where giving a verbal description of sensory input impairs formation of memories of that input. This was first reported by Schooler and Engstler-Schooler (1990) where it was shown that the effects can be observed across multiple domains of cognition which are known to rely on non-verbal knowledge and perceptual expertise. One example of this is memory, which has been known to be influenced by language. Seminal work by Carmichael and collaborators (1932) demonstrated that when verbal labels are connected to non-verbal forms during an individual's encoding process, it could potentially bias the way those forms are reproduced. Because of this, memory performance relying on reportable aspects of memory that encode visual forms should be vulnerable to the effects of verbalization. == Initial findings == Schooler and Engstler-Schooler (1990) were the first to report findings of verbal overshadowing. In their study, participants watched a video of a simulated robbery and were instructed to either verbally describe the robber or engage in a control task. Those who engaged in giving a verbal description were less likely to correctly identify the robber from a test lineup, compared to those who engaged in the control task. A larger effect was detected when the verbal description was provided 20, rather than 5, minutes after the video, and immediately before the test lineup. A meta-analysis by Meissner and Brigham (2001) supported the effects of verbal overshadowing, showing a small but reliably negative effect. == General effects of verbal overshadowing == The effects of verbal overshadowing have been generalized across multiple domains of cognition that are known to rely on non-verbal knowledge and perceptual expertise, such as memory. Memory has been known to be influenced by language. Seminal work by Carmichael and collaborators (1932) demonstrated that labels attached to, or associated with, non-verbal forms during memory encoding can affect the way the forms were subsequently reproduced. Because of this, memory performance that relies on reportable aspects of memory that encode visual forms should be vulnerable to the effects of verbalization. Pelizzon, Brandimonte, and Luccio (2002) found that visual memory representations appear to incorporate visual, spatial, and temporal characteristics. It is explained as follows: With the temporal code (where the only information available is the sequence of the stimuli), performance levels remain high, unless participants are required to retrieve the stimuli in a different order from that used at encoding (visual cue). In this case, performance is significantly impaired, even in the presence of a visual cue. The study showed that order information acts as a link between the two separate representations of figure and background, hence preventing verbal overshadowing at encoding (temporal component) or attenuating its influence at retrieval (spatial component).(p. 960) Hatano, Ueno, Kitagami, and Kawaguchi found that verbal overshadowing is likely to occur when participants verbally described targets in detail. Detailed verbal descriptions resulted in more frequently inaccurate descriptions that in turn created inaccurate representations in the memories of participants. Inaccuracies are also likely to occur when face recognition comes immediately after verbalization. Other forms of non-verbal knowledge affected by verbal overshadowing include the following: [Verbal overshadowing] has also been observed when participants attempt to generate descriptions of other 'difficult-to-describe' stimuli such as colors (Schooler and Engstler-Schooler, 1990) or abstract figures (Brandimonte et al., 1997), or other non-visual tasks such as wine tasting (Melcher and Schooler, 1996), decision making (Wilson and Schooler, 1991), and insight problem-solving. (p. 871) (Schooler et al., 1993) Verbalization of stimuli leads to the disruption of non-reportable processes that are necessary for achieving insight solutions, which are distinct from language processes. Schooler, Ohlsson, and Brooks (1993) found that face recognition requires information that cannot be adequately verbalized, giving rise to difficulty in describing factors in recognition judgments. Subjects were less effective in solving insight problems when compelled to put their thoughts in words, which suggests that language may interfere with thought. The verbal overshadowing effect was not seen when participants engaged in articulatory suppression. Performance was reduced in both the verbal and non-verbal description conditions. This is evidence that verbal encoding plays a role in face recognition. By testing with distracting faces presented between study and test, Lloyd-Jones and Brown (2008) suggested a dual-process approach to recognition memory took place, that verbalization influenced familiarity-based processes at first, but its effects were later seen on recollection, when discrimination between items became more difficult. == Verbal overshadowing in facial recognition == The verbal overshadowing effect can be found for facial recognition because faces are predominately processed in a holistic or configurable manner. (Tanaka & Farah, 1993; Tanaka & Sengco, 1997) Verbalizing one's memory for a face is done using a featural or analytic strategy, leading to a drift from the configurable information about the face and to impaired recognition performance. However, Fallshore & Schooler (1995) found that the verbal overshadowing effect was not found when participants described faces of races different from their own. A study by Brown and Lloyd-Jones (2003) found that there was no verbal overshadowing effect found in car descriptions; it was only seen in facial descriptions. The authors noted that descriptions were no different on any measure including accuracy. It is suggested that less expertise in verbalizing faces rather than cars invokes a stronger shift in verbal and featural processing. This supports the concept of a transfer inappropriate retrieval framework and addresses some limitations of the effect. Wickham and Swift (2006) suggested that the verbal overshadowing effect is not seen in describing all faces, and one aspect that determines this is distinctiveness. Results showed that typical faces produce verbal overshadowing, while distinctive faces did not. In studies of eyewitness reports, variation in response criteria given by participants influenced the quality of the descriptions generated and accuracy on identification task, known as the retrieval-based effect. Face recognition was also impaired when subjects described a familiar face, such as a parent, or when describing a previously seen but novel face. Dodson, Johnson, and Schooler (1997) found that recognition was also impaired when participants were provided with a description of a previously seen face, and they were able to ignore provided versus self-generated descriptions more easily. This finding of verbal overshadowing suggested that eyewitness recognition is not only affected by their own descriptions, but of descriptions heard from others, such other eyewitness testimonies. == Voice recognition == The verbal overshadowing effect has also been found to affect voice identification. Research shows that describing a non-verbal stimuli leads to a decrease in recognition accuracy. In an unpublished study by Schooler, Fiore, Melcher, and Ambadar (1996), participants listened to a tape-recorded voice, after which they were asked either to verbally describe it or to not do so, and then asked to distinguish the voice from 3 similar distractor voices. The results showed that verbal overshadowing impaired accuracy of recognition based on gut feeling, suggesting an overall verbal overshadowing for voice recognition. Due to the forensic relevance of voices heard over the telephone and harassing phone calls that are often a problem for police, Perfect, Hunt, and Harris (2002) examined the influence of three factors on accuracy and confidence in voice recognition from a line-up. They expected to find an effect, because voice represents a class of stimuli that is difficult to describe verbally. This meets Schooler et al.'s (1997) modality mismatch criterion, meaning that describing the speakers age, gender, or accent is difficult, making voice recognition susceptible to the verbal overshadowing phenomenon. It was found that the method of memory encoding had no impact on performance, and that hearing a telephone voice reduced confidence but did not affect accuracy. They also found that providing a verbal description impaired accuracy but had no effect on confidence. The data showed an effect of verbal overshadowing in voice recognition and provided yet another disassociation between confidence and performance. Although there was a difference in confidence level, witnesses were able to identify voices over the telephone as accurately as voices heard direc

    Read more →
  • Pixlr

    Pixlr

    Pixlr is a group of SaaS creative tools including Pixlr.com, Designs.ai and Vectr.com. Pixlr.com is a cloud-based set of image editing tools and utilities, including AI image generation and enhancements. The Pixlr suite targets users who require subjectively simple, or more advanced, photo editing as well as graphic design. It features a freemium business model with subscription plans—Plus, Premium and Teams. The platform can be used on desktop and also smartphones and tablets. Pixlr is compatible with various image formats such as JPEG, PNG, WEBP, GIF, PSD (Photoshop Document) and PXZ (native Pixlr document format). Designs.ai lets users create content using AI, with a goal of being within two minutes, across different media types including videos, text, banners and audio. Vectr.com was acquired in 2017 before being spun out into Pixlr Group in 2023. == History == Pixlr was founded in 2008 and built on Macromedia Flash. On 19 July 2011, Autodesk announced that they had acquired the Pixlr suite. In 2013, Time listed Pixlr as one of the top 50 websites of the year. In 2017, Pixlr was acquired from Autodesk. It was subsequently rebuilt and relaunched in HTML5 in 2019. In September 2023, Pixlr was awarded as the Top 13 GenAi Web Product by the world's top venture firm Andreessen Horowitz. In November 2023, Pixlr, Designs.ai and Vectr were combined as a new business group named Pixlr Group focusing on generative AI and creative software solutions. In May 2024, Pixlr was featured as one of the top 18 progressive web applications highlighted on Google I/O. == Versions == Pixlr.com rebranded itself as a full creative suite in 2019 by introducing Pixlr X, Pixlr E and Pixlr M. The platform introduced more features in December 2021 with a new logo and added tools which included: Brushes, the 'Heal tool', Animation, and Batch upload. The brush feature enables the creation of hand-drawn effects. The Heal tool allows users to remove unwanted objects from their images whereas the Animation feature can be used to include movements into their edits. Users can also utilize Batch upload to edit up to 50 images simultaneously. In November 2022, Pixlr 2023 was launched, adding more tools such as "AI smart resize", colorization, text wrapping and other additional effects. In November 2023, Pixlr 2024 was launched with Pixlr Designer and new AI-powered updates which includes AI image generation, AI infill, AI inpainting and more.

    Read more →
  • Image translation

    Image translation

    Image translation is the machine translation of images of printed text (posters, banners, menus, screenshots etc.). This is done by applying optical character recognition (OCR) technology to an image to extract any text contained in the image, and then have this text translated into a language of their choice, and the applying digital image processing on the original image to get the translated image with a new language. == General == Machine translation made available on the internet (web and mobile) is a notable advance in multilingual communication eliminating the need for an intermediary translator/interpreter, translating foreign texts still poses a problem to the user as they cannot be expected to be able to type the foreign text they wish to translate and understand. Manually entering the foreign text may prove to be a difficulty especially in cases where an unfamiliar alphabet is used from a script which user can't read, e.g. Cyrillic, Chinese, Japanese etc. for an English speaker or any speaker of a Latin-based language or vice versa. The technical advancements in OCR made it possible to recognize text from images. The possibility to use one's mobile device's camera to capture and extract printed text is also known as mobile OCR and was first introduced in Japanese manufactured mobile telephones in 2004. Using the handheld's camera one could take a picture of (a line of) text and have it extracted (digitalized) for further manipulation such as storing the information in their contacts list, as a web page address (URL) or text to use in an SMS/email message etc. Presently, mobile devices having a camera resolution of 2 megapixels or above with an auto-focus ability, often feature the text scanner service. Taking the text scanning facility one step further, image translation emerged, giving users the ability to capture text with their mobile phone's camera, extract the text, and have it translated in their own language. More and more applications emerged on this technology including Word Lens. After getting acquired by Google, it was made a part of Google Translate mobile app. Another simultaneous advancement in Image Processing, has also made it possible now to replace the text on the image with the translated text and create a new image altogether. == History == The development of the image translation service springs from the advances in OCR technology (miniaturization and reduction of memory resources consumed) enabling text scanning on mobile telephones. Among the first to announce mobile software capable of “reading” text using the mobile device's camera is International Wireless Inc. who in February 2003 released their “CheckPoint” and “WebPoint” applications. “CheckPoint” reads critical symbolic information on checks and is aimed at reducing losses that mobile merchants suffer from “bounced” checks by scanning the MICR number on the bottom of a check, while “WebPoint” enables the visual recognition and decoding of printed URL's, which are then opened by the device's web browser. The first commercial release of a mobile text scanner, however, took place in December 2004 when Vodafone and Sharp began selling the 902SH mobile which was the first to feature a 2 megapixel digital camera with optical zoom. Among the device's various multimedia features was the built-in text/bar code/QR code scanner. The text scanner function could handle up to 60 alphabetical characters simultaneously. The scanned text could be then sent as an email or SMS message, added as a dictionary entry or, in the case of scanned URLs, opened via the device's web browser. All subsequent Sharp mobiles feature the text scanner functionality. In September 2005, NEC Corporation and the Nara Institute of Science and Technology in Japan (NAIST) announced new software capable of transforming cameraphones into text scanners. The application differs substantially from similarly equipped mobile telephones in Japan (able to scan businesscards and small bits of text and use OCR to convert that to editable text or to URL addresses) by it ability to scan a whole page. The two companies, however, said they would not release the software commercially before the end of 2008. Combining the text scanner function with machine translation technology was first made by US company RantNetwork who in July 2007 started selling the Communilator, a machine translation application for mobile devices featuring the Image Translation functionality. Using the built-in camera, the mobile user could take a picture of some printed text, apply OCR to recognize the text and then translate it into any one of over 25 language available. In April 2008 Nokia showcased their Shoot-to-Translate application for the N73 model which is capable of taking a picture using the device's camera, extracting the text and then translating it. The application only offers Chinese to English translation, and does not handle large segments of text. Nokia said they are in the process of developing their Multiscanner product which, besides scanning text and business cards, would be able to translate between 52 languages. Again in April 2008, Korean company Unichal Inc. released their handheld Dixau text scanner capable of scanning and recognizing English text and then translating it into Korean using online translation tools such as Wikipedia or Google Translate. The device is connected to a PC or a laptop via the USB port. In February 2009, Bulgarian company Interlecta presented at the Mobile World Congress in Barcelona their mobile translator including image recognition and speech synthesis. The application handles all European languages along with Chinese, Japanese and Korean. The software connects to a server over the Internet to accomplish the image recognition and the translation. In May 2014, Google acquired Word Lens to improve the quality of visual and voice translation. It is able to scan text or picture with one's device and have it translated instantly. Since the OCR has been improving many companies or website started combining OCR and translation, to read the text from an image and show the translated text. In August 2018, an Indian company created ImageTranslate. It is able to read, translate and re-create the image in another language. As of late 2018, the tool added 13 new languages, including Arabic, Thai, Vietnamese, Hindi, and Bengali, significantly increasing its utility in Asia and the Middle East. This helps users translate photos already stored in their phone's gallery, not just live, real-time views. Currently, image translation is offered by the following companies: Google Translate app with camera ImageTranslate Yandex

    Read more →
  • Wrike

    Wrike

    Wrike, Inc. is an American project management application service provider based in San Jose, California. Wrike also has offices in India, Dallas, Tallinn, Nicosia, Dublin, Tokyo, Melbourne, and Prague. == History == Wrike was founded in 2006 by Andrew Filev. Currently CEO at Wrike is Thomas Scott. Filev initially self-funded the company before later obtaining investor funding. Wrike released the beta version of its software (also called Wrike) in December 2006. The company then launched a new "Enterprise" platform in December 2013. In June 2015, Wrike announced the opening of an office in Dublin, Ireland and in 2016, Wrike launched a datacenter there to host data in compliance with local privacy regulations. In July 2016, Wrike announced the launch of Wrike for Marketers. That same year, Wrike's headquarters moved from Mountain View to San Jose, California. In January 2021, Citrix Systems announced its intention to acquire Wrike for $2.25 billion. The acquisition closed in March 2021. On January 31, 2022, it was announced that Citrix had been acquired in a $16.5 billion deal by affiliates of Vista Equity Partners and Evergreen Coast Capital. Citrix would merge with TIBCO Software, a Vista portfolio company to form Cloud Software Group (CSG). In September 2022, Wrike separated from Citrix Systems. In July 2023, Vista transferred ownership to Symphony Technology Group. == Investments == Wrike received $1 million in Angel funding in 2012 from TMT Investments. In October, 2013, Wrike secured $10 million in investment funding from Bain Capital. In May 2015, the company secured $15 million in a new round of funding. Investors included Scale Venture Partners, DCM Ventures, and Bain Capital. At that time, Wrike had 8,000 customers, 200 employees, and 30,000 new users each month. On November 29, 2018, Wrike signed a definitive agreement to receive a majority investment by Vista Equity Partners (“Vista”), a firm focused on software, data and technology-enabled businesses. == Software == The Wrike project management software is a Software-as-a-Service (SaaS) product with tools for managing projects, deadlines, schedules, and workflow processes. It includes collaboration features. The application is available in English, French, Spanish, German, Portuguese, Italian, Japanese and Russian. Wrike has triggers for task automation in workflow management. === Features === Wrike features a multi-pane UI and consists of features in two categories: project management, and team collaboration. According to Wrike, project management features are designed to help teams track dates and dependencies associated with projects, manage assignments and resources, and track time. These include an interactive Gantt chart, a workload view, and a sortable table that can be customized to store project data. The software includes a co-editing tool, discussion threads on tasks, and tools for attaching documents, editing them, and tracking their changes. Wrike uses an "inbox" feature and browser notifications to alert users of updates from their colleagues and dashboards for quick overviews of pending tasks. These updates are also available in Wrike's mobile apps on iOS and Android. Wrike has an optional feature set called "Wrike for Marketers" which has several tools for managing marketing workflows. In May 2012, Wrike announced the launch of a freemium version of its software for teams of up to 5 users. That year also saw the integration of a live text coeditor into its workspace to unify collaboration and task management. In late 2013 Wrike released a new feature set called Wrike Enterprise which included advanced analytics and other tools targeted at large business customers. Since then it has released several major updates to Wrike Enterprise, including a customizable spreadsheet called "Dynamic Platform" in late 2014 and custom workflows for teams in 2015. In July 2016, Wrike was updated with a set of add-on features under the name "Wrike for Marketers," which includes integrations with Adobe Photoshop, a tool for submitting requests, and proofing and approval tools for creative assets like videos and images. Wrike is available as native Android and iOS apps. Mobile apps include an interactive Gantt chart that syncs across devices. The apps are available offline, and sync when connection is restored. === Criticism === Critics said new users may have a learning curve with complex features. Wrike has 2,710 customers for an estimated 0.04% market share. Competitors include Google Workspace, Slack (software), and Quip (software).

    Read more →
  • Oversampled binary image sensor

    Oversampled binary image sensor

    An oversampled binary image sensor is an image sensor with non-linear response capabilities reminiscent of traditional photographic film. Each pixel in the sensor has a binary response, giving only a one-bit quantized measurement of the local light intensity. The response function of the image sensor is non-linear and similar to a logarithmic function, which makes the sensor suitable for high dynamic range imaging. == Working principle == Before the advent of digital image sensors, photography, for the most part of its history, used film to record light information. At the heart of every photographic film are a large number of light-sensitive grains of silver-halide crystals. During exposure, each micron-sized grain has a binary fate: Either it is struck by some incident photons and becomes "exposed", or it is missed by the photon bombardment and remains "unexposed". In the subsequent film development process, exposed grains, due to their altered chemical properties, are converted to silver metal, contributing to opaque spots on the film; unexposed grains are washed away in a chemical bath, leaving behind the transparent regions on the film. Thus, in essence, photographic film is a binary imaging medium, using local densities of opaque silver grains to encode the original light intensity information. Thanks to the small size and large number of these grains, one hardly notices this quantized nature of film when viewing it at a distance, observing only a continuous gray tone. The oversampled binary image sensor is reminiscent of photographic film. Each pixel in the sensor has a binary response, giving only a one-bit quantized measurement of the local light intensity. At the start of the exposure period, all pixels are set to 0. A pixel is then set to 1 if the number of photons reaching it during the exposure is at least equal to a given threshold q. One way to build such binary sensors is to modify standard memory chip technology, where each memory bit cell is designed to be sensitive to visible light. With current CMOS technology, the level of integration of such systems can exceed 109~1010 (i.e., 1 giga to 10 giga) pixels per chip. In this case, the corresponding pixel sizes (around 50~nm ) are far below the diffraction limit of light, and thus the image sensor is oversampling the optical resolution of the light field. Intuitively, one can exploit this spatial redundancy to compensate for the information loss due to one-bit quantizations, as is classic in oversampling delta-sigma converters. Building a binary sensor that emulates the photographic film process was first envisioned by Fossum, who coined the name digital film sensor (now referred to as a quanta image sensor). The original motivation was mainly out of technical necessity. The miniaturization of camera systems calls for the continuous shrinking of pixel sizes. At a certain point, however, the limited full-well capacity (i.e., the maximum photon-electrons a pixel can hold) of small pixels becomes a bottleneck, yielding very low signal-to-noise ratios (SNRs) and poor dynamic ranges. In contrast, a binary sensor whose pixels need to detect only a few photon-electrons around a small threshold q has much less requirement for full-well capacities, allowing pixel sizes to shrink further. == Imaging model == === Lens === Consider a simplified camera model shown in Fig.1. The λ 0 ( x ) {\displaystyle \lambda _{0}(x)} is the incoming light intensity field. By assuming that light intensities remain constant within a short exposure period, the field can be modeled as only a function of the spatial variable x {\displaystyle x} . After passing through the optical system, the original light field λ 0 ( x ) {\displaystyle \lambda _{0}(x)} gets filtered by the lens, which acts like a linear system with a given impulse response. Due to imperfections (e.g., aberrations) in the lens, the impulse response, a.k.a. the point spread function (PSF) of the optical system, cannot be a Dirac delta, thus, imposing a limit on the resolution of the observable light field. However, a more fundamental physical limit is due to light diffraction. As a result, even if the lens is ideal, the PSF is still unavoidably a small blurry spot. In optics, such diffraction-limited spot is often called the Airy disk, whose radius R a {\displaystyle R_{a}} can be computed as R a = 1.22 w f , {\displaystyle R_{a}=1.22\,wf,} where w {\displaystyle w} is the wavelength of the light and f {\displaystyle f} is the F-number of the optical system. Due to the lowpass (smoothing) nature of the PSF, the resulting λ ( x ) {\displaystyle \lambda (x)} has a finite spatial-resolution, i.e., it has a finite number of degrees of freedom per unit space. === Sensor === Fig.2 illustrates the binary sensor model. The s m {\displaystyle s_{m}} denote the exposure values accumulated by the sensor pixels. Depending on the local values of s m {\displaystyle s_{m}} , each pixel (depicted as "buckets" in the figure) collects a different number of photons hitting on its surface. y m {\displaystyle y_{m}} is the number of photons impinging on the surface of the m {\displaystyle m} th pixel during an exposure period. The relation between s m {\displaystyle s_{m}} and the photon count y m {\displaystyle y_{m}} is stochastic. More specifically, y m {\displaystyle y_{m}} can be modeled as realizations of a Poisson random variable, whose intensity parameter is equal to s m {\displaystyle s_{m}} , As a photosensitive device, each pixel in the image sensor converts photons to electrical signals, whose amplitude is proportional to the number of photons impinging on that pixel. In a conventional sensor design, the analog electrical signals are then quantized by an A/D converter into 8 to 14 bits (usually the more bits the better). But in the binary sensor, the quantizer is 1 bit. In Fig.2, b m {\displaystyle b_{m}} is the quantized output of the m {\displaystyle m} th pixel. Since the photon counts y m {\displaystyle y_{m}} are drawn from random variables, so are the binary sensor output b m {\displaystyle b_{m}} . === Spatial and temporal oversampling === If it is allowed to have temporal oversampling, i.e., taking multiple consecutive and independent frames without changing the total exposure time τ {\displaystyle \tau } , the performance of the binary sensor is equivalent to the sensor with same number of spatial oversampling under certain condition. It means that people can make trade off between spatial oversampling and temporal oversampling. This is quite important, since technology usually gives limitation on the size of the pixels and the exposure time. == Advantages over traditional sensors == Due to the limited full-well capacity of conventional image pixel, the pixel will saturate when the light intensity is too strong. This is the reason that the dynamic range of the pixel is low. For the oversampled binary image sensor, the dynamic range is not defined for a single pixel, but a group of pixels, which makes the dynamic range high. == Reconstruction == One of the most important challenges with the use of an oversampled binary image sensor is the reconstruction of the light intensity λ ( x ) {\displaystyle \lambda (x)} from the binary measurement b m {\displaystyle b_{m}} . Maximum likelihood estimation can be used for solving this problem. Fig. 4 shows the results of reconstructing the light intensity from 4096 binary images taken by single photon avalanche diodes (SPADs) camera. A better reconstruction quality with fewer temporal measurements and faster, hardware friendly implementation, can be achieved by more sophisticated algorithms.

    Read more →
  • Spatial anti-aliasing

    Spatial anti-aliasing

    In digital signal processing, spatial anti-aliasing is a technique for minimizing the distortion artifacts (aliasing) when representing a high-resolution image at a lower resolution. Anti-aliasing is used in digital photography, computer graphics, digital audio, and many other applications. Anti-aliasing means removing signal components that have a higher frequency than is able to be properly resolved by the recording (or sampling) device. This removal is done before (re)sampling at a lower resolution. When sampling is performed without removing this part of the signal, it causes undesirable artifacts such as black-and-white noise. In signal acquisition and audio, anti-aliasing is often done using an analog anti-aliasing filter to remove the out-of-band component of the input signal prior to sampling with an analog-to-digital converter. In digital photography, optical anti-aliasing filters made of birefringent materials smooth the signal in the spatial optical domain. The anti-aliasing filter essentially blurs the image slightly in order to reduce the resolution to or below that achievable by the digital sensor (the larger the pixel pitch, the lower the achievable resolution at the sensor level). == Examples == In computer graphics, anti-aliasing improves the appearance of "jagged" polygon edges, or "jaggies", so they are smoothed out on the screen. However, it incurs a performance cost for the graphics card and uses more video memory. The level of anti-aliasing determines how smooth polygon edges are (and how much video memory it consumes). Near the top of an image with a receding checker-board pattern, the image is difficult to recognise and often not considered aesthetically pleasing. In contrast, when anti-aliased the checker-board near the top blends into grey, which is usually the desired effect when the resolution is insufficient to show the detail. Even near the bottom of the image, the edges appear much smoother in the anti-aliased image. Multiple methods exist, including the sinc filter, which is considered a better anti-aliasing algorithm. When magnified, it can be seen how anti-aliasing interpolates the brightness of the pixels at the boundaries to produce grey pixels since the space is occupied by both black and white tiles. These help make the sinc filter antialiased image appear much smoother than the original. In a simple diamond image, anti-aliasing blends the boundary pixels; this reduces the aesthetically jarring effect of the sharp, step-like boundaries that appear in the aliased graphic. Anti-aliasing is often applied in rendering text on a computer screen, to suggest smooth contours that better emulate the appearance of text produced by conventional ink-and-paper printing. Particularly with fonts displayed on typical LCD screens, it is common to use subpixel rendering techniques like ClearType. Sub-pixel rendering requires special colour-balanced anti-aliasing filters to turn what would be severe colour distortion into barely-noticeable colour fringes. Equivalent results can be had by making individual sub-pixels addressable as if they were full pixels, and supplying a hardware-based anti-aliasing filter as is done in the OLPC XO-1 laptop's display controller. Pixel geometry affects all of this, whether the anti-aliasing and sub-pixel addressing are done in software or hardware. == Simplest approach to anti-aliasing == The most basic approach to anti-aliasing a pixel is determining what percentage of the pixel is occupied by a given region in the vector graphic - in this case a pixel-sized square, possibly transposed over several pixels - and using that percentage as the colour. A Python program producing a basic plot of a single, white-on-black anti-aliased point using the method is as follows: This method is generally best suited for simple graphics, such as basic lines or curves, and applications that would otherwise have to convert absolute coordinates to pixel-constrained coordinates, such as 3D graphics. It is a fairly fast function, but it is relatively low-quality, and gets slower as the complexity of the shape increases. For purposes requiring very high-quality graphics or very complex vector shapes, this will probably not be the best approach. Note: The plot_antialiased_point routine above cannot blindly set the colour value to the percent calculated. It must add the new value to the existing value at that location up to a maximum of 1. Otherwise, the brightness of each pixel will be equal to the darkest value calculated in time for that location which produces a very bad result. For example, if one point sets a brightness level of 0.90 for a given pixel and another point calculated later barely touches that pixel and has a brightness of 0.05, the final value set for that pixel should be 0.95, not 0.05. For more sophisticated shapes, the algorithm may be generalized as rendering the shape to a pixel grid with higher resolution than the target display surface (usually a multiple that is a power of 2 to reduce distortion), then using bicubic interpolation to determine the average intensity of each real pixel on the display surface. == Signal processing approach to anti-aliasing == In this approach, the ideal image is regarded as a signal. The image displayed on the screen is taken as samples, at each (x,y) pixel position, of a filtered version of the signal. Ideally, one would understand how the human brain would process the original signal, and provide an on-screen image that will yield the most similar response by the brain. The most widely accepted analytic tool for such problems is the Fourier transform; this decomposes a signal into basis functions of different frequencies, known as frequency components, and gives us the amplitude of each frequency component in the signal. The waves are of the form: cos ⁡ ( 2 j π x ) cos ⁡ ( 2 k π y ) {\displaystyle \ \cos(2j\pi x)\cos(2k\pi y)} where j and k are arbitrary non-negative integers. There are also frequency components involving the sine functions in one or both dimensions, but for the purpose of this discussion, the cosine will suffice. The numbers j and k together are the frequency of the component: j is the frequency in the x direction, and k is the frequency in the y direction. The goal of an anti-aliasing filter is to greatly reduce frequencies above a certain limit, known as the Nyquist frequency, so that the signal will be accurately represented by its samples, or nearly so, in accordance with the sampling theorem; there are many different choices of detailed algorithm, with different filter transfer functions. Current knowledge of human visual perception is not sufficient, in general, to say what approach will look best. == Two dimensional considerations == The previous discussion assumes that the rectangular mesh sampling is the dominant part of the problem. The filter usually considered optimal is not rotationally symmetrical, as shown in this first figure; this is because the data is sampled on a square lattice, not using a continuous image. This sampling pattern is the justification for doing signal processing along each axis, as it is traditionally done on one dimensional data. Lanczos resampling is based on convolution of the data with a discrete representation of the sinc function. If the resolution is not limited by the rectangular sampling rate of either the source or target image, then one should ideally use rotationally symmetrical filter or interpolation functions, as though the data were a two dimensional function of continuous x and y. The sinc function of the radius has too long a tail to make a good filter (it is not even square-integrable). A more appropriate analog to the one-dimensional sinc is the two-dimensional Airy disc amplitude, the 2D Fourier transform of a circular region in 2D frequency space, as opposed to a square region. One might consider a Gaussian plus enough of its second derivative to flatten the top (in the frequency domain) or sharpen it up (in the spatial domain), as shown. Functions based on the Gaussian function are natural choices, because convolution with a Gaussian gives another Gaussian whether applied to x and y or to the radius. Similarly to wavelets, another of its properties is that it is halfway between being localized in the configuration (x and y) and in the spectral (j and k) representation. As an interpolation function, a Gaussian alone seems too spread out to preserve the maximum possible detail, and thus the second derivative is added. As an example, when printing a photographic negative with plentiful processing capability and on a printer with a hexagonal pattern, there is no reason to use sinc function interpolation. Such interpolation would treat diagonal lines differently from horizontal and vertical lines, which is like a weak form of aliasing. == Practical real-time anti-aliasing approximations == There are only a handful of primitives used at the lowest level in a real-time rend

    Read more →