An oversampled binary image sensor is an image sensor with non-linear response capabilities reminiscent of traditional photographic film. Each pixel in the sensor has a binary response, giving only a one-bit quantized measurement of the local light intensity. The response function of the image sensor is non-linear and similar to a logarithmic function, which makes the sensor suitable for high dynamic range imaging. == Working principle == Before the advent of digital image sensors, photography, for the most part of its history, used film to record light information. At the heart of every photographic film are a large number of light-sensitive grains of silver-halide crystals. During exposure, each micron-sized grain has a binary fate: Either it is struck by some incident photons and becomes "exposed", or it is missed by the photon bombardment and remains "unexposed". In the subsequent film development process, exposed grains, due to their altered chemical properties, are converted to silver metal, contributing to opaque spots on the film; unexposed grains are washed away in a chemical bath, leaving behind the transparent regions on the film. Thus, in essence, photographic film is a binary imaging medium, using local densities of opaque silver grains to encode the original light intensity information. Thanks to the small size and large number of these grains, one hardly notices this quantized nature of film when viewing it at a distance, observing only a continuous gray tone. The oversampled binary image sensor is reminiscent of photographic film. Each pixel in the sensor has a binary response, giving only a one-bit quantized measurement of the local light intensity. At the start of the exposure period, all pixels are set to 0. A pixel is then set to 1 if the number of photons reaching it during the exposure is at least equal to a given threshold q. One way to build such binary sensors is to modify standard memory chip technology, where each memory bit cell is designed to be sensitive to visible light. With current CMOS technology, the level of integration of such systems can exceed 109~1010 (i.e., 1 giga to 10 giga) pixels per chip. In this case, the corresponding pixel sizes (around 50~nm ) are far below the diffraction limit of light, and thus the image sensor is oversampling the optical resolution of the light field. Intuitively, one can exploit this spatial redundancy to compensate for the information loss due to one-bit quantizations, as is classic in oversampling delta-sigma converters. Building a binary sensor that emulates the photographic film process was first envisioned by Fossum, who coined the name digital film sensor (now referred to as a quanta image sensor). The original motivation was mainly out of technical necessity. The miniaturization of camera systems calls for the continuous shrinking of pixel sizes. At a certain point, however, the limited full-well capacity (i.e., the maximum photon-electrons a pixel can hold) of small pixels becomes a bottleneck, yielding very low signal-to-noise ratios (SNRs) and poor dynamic ranges. In contrast, a binary sensor whose pixels need to detect only a few photon-electrons around a small threshold q has much less requirement for full-well capacities, allowing pixel sizes to shrink further. == Imaging model == === Lens === Consider a simplified camera model shown in Fig.1. The λ 0 ( x ) {\displaystyle \lambda _{0}(x)} is the incoming light intensity field. By assuming that light intensities remain constant within a short exposure period, the field can be modeled as only a function of the spatial variable x {\displaystyle x} . After passing through the optical system, the original light field λ 0 ( x ) {\displaystyle \lambda _{0}(x)} gets filtered by the lens, which acts like a linear system with a given impulse response. Due to imperfections (e.g., aberrations) in the lens, the impulse response, a.k.a. the point spread function (PSF) of the optical system, cannot be a Dirac delta, thus, imposing a limit on the resolution of the observable light field. However, a more fundamental physical limit is due to light diffraction. As a result, even if the lens is ideal, the PSF is still unavoidably a small blurry spot. In optics, such diffraction-limited spot is often called the Airy disk, whose radius R a {\displaystyle R_{a}} can be computed as R a = 1.22 w f , {\displaystyle R_{a}=1.22\,wf,} where w {\displaystyle w} is the wavelength of the light and f {\displaystyle f} is the F-number of the optical system. Due to the lowpass (smoothing) nature of the PSF, the resulting λ ( x ) {\displaystyle \lambda (x)} has a finite spatial-resolution, i.e., it has a finite number of degrees of freedom per unit space. === Sensor === Fig.2 illustrates the binary sensor model. The s m {\displaystyle s_{m}} denote the exposure values accumulated by the sensor pixels. Depending on the local values of s m {\displaystyle s_{m}} , each pixel (depicted as "buckets" in the figure) collects a different number of photons hitting on its surface. y m {\displaystyle y_{m}} is the number of photons impinging on the surface of the m {\displaystyle m} th pixel during an exposure period. The relation between s m {\displaystyle s_{m}} and the photon count y m {\displaystyle y_{m}} is stochastic. More specifically, y m {\displaystyle y_{m}} can be modeled as realizations of a Poisson random variable, whose intensity parameter is equal to s m {\displaystyle s_{m}} , As a photosensitive device, each pixel in the image sensor converts photons to electrical signals, whose amplitude is proportional to the number of photons impinging on that pixel. In a conventional sensor design, the analog electrical signals are then quantized by an A/D converter into 8 to 14 bits (usually the more bits the better). But in the binary sensor, the quantizer is 1 bit. In Fig.2, b m {\displaystyle b_{m}} is the quantized output of the m {\displaystyle m} th pixel. Since the photon counts y m {\displaystyle y_{m}} are drawn from random variables, so are the binary sensor output b m {\displaystyle b_{m}} . === Spatial and temporal oversampling === If it is allowed to have temporal oversampling, i.e., taking multiple consecutive and independent frames without changing the total exposure time τ {\displaystyle \tau } , the performance of the binary sensor is equivalent to the sensor with same number of spatial oversampling under certain condition. It means that people can make trade off between spatial oversampling and temporal oversampling. This is quite important, since technology usually gives limitation on the size of the pixels and the exposure time. == Advantages over traditional sensors == Due to the limited full-well capacity of conventional image pixel, the pixel will saturate when the light intensity is too strong. This is the reason that the dynamic range of the pixel is low. For the oversampled binary image sensor, the dynamic range is not defined for a single pixel, but a group of pixels, which makes the dynamic range high. == Reconstruction == One of the most important challenges with the use of an oversampled binary image sensor is the reconstruction of the light intensity λ ( x ) {\displaystyle \lambda (x)} from the binary measurement b m {\displaystyle b_{m}} . Maximum likelihood estimation can be used for solving this problem. Fig. 4 shows the results of reconstructing the light intensity from 4096 binary images taken by single photon avalanche diodes (SPADs) camera. A better reconstruction quality with fewer temporal measurements and faster, hardware friendly implementation, can be achieved by more sophisticated algorithms.
Computers & Graphics
Computers & Graphics is a peer-reviewed scientific journal that covers computer graphics and related subjects such as data visualization, human-computer interaction, virtual reality, and augmented reality. It was established in 1975 and originally published by Pergamon Press. It is now published by Elsevier, which acquired Pergamon Press in 1991. From 2018 to 2022 Graphics and Visual Computing was an open access sister journal sharing the same editorial team and double-blind peer-review policies. It has since merged into GMOD, the International Journal of Graphical Models. == History == The journal was established in 1975 by founding editor-in-chief Robert Schiffman (University of Colorado, Boulder), as Computers & Graphics-UK. Schiffman, who co-organized the first SIGGRAPH conference in 1974, had the conference proceedings published as the first issue of the journal. He was succeeded in 1978 by Larry Feeser (Rensselaer Polytechnic Institute). In 1983 José Luis Encarnação (Technische Hochschule Darmstadt) took over. Joaquim Jorge (University of Lisbon) has been Editor-in-Chief since 2007. == Replicability == The journal is working with the Graphics Replicability Stamp Initiative to promote replicable results in publication. == Abstracting and indexing == The journal is abstracted and indexed in: Current Contents/Engineering, Computing & Technology EBSCO databases Ei Compendex Inspec ProQuest databases Science Citation Index Expanded Scopus Chinese Computer Federation/Recommended List of International Conferences and Journals on CAD & Graphics and Multimedia. According to the Journal Citation Reports, the journal has a 2022 impact factor of 2.5.
Attempto Controlled English
Attempto Controlled English (ACE) is a controlled natural language, i.e. a subset of standard English with a restricted syntax and restricted semantics described by a small set of construction and interpretation rules. It has been under development at the University of Zurich since 1995. In 2013, ACE version 6.7 was announced. ACE can serve as knowledge representation, specification, and query language, and is intended for professionals who want to use formal notations and formal methods, but may not be familiar with them. Though ACE appears perfectly natural—it can be read and understood by any speaker of English—it is in fact a formal language. ACE and its related tools have been used in the fields of software specifications, theorem proving, proof assistants, text summaries, ontologies, rules, querying, medical documentation and planning. Here are some simple examples: Every woman is a human. A woman is a human. A man tries-on a new tie. If the tie pleases his wife then the man buys it. ACE construction rules require that each noun be introduced by a determiner (a, every, no, some, at least 5, ...). Regarding the list of examples above, ACE interpretation rules decide that (1) is interpreted as universally quantified, while (2) is interpreted as existentially quantified. Sentences like "Women are human" do not follow ACE syntax and are consequently not valid. Interpretation rules resolve the anaphoric references in (3): the tie and it of the second sentence refer to a new tie of the first sentence, while his and the man of the second sentence refer to a man of the first sentence. Thus an ACE text is a coherent entity of anaphorically linked sentences. The Attempto Parsing Engine (APE) translates ACE texts unambiguously into discourse representation structures (DRS) that use a variant of the language of first-order logic. A DRS can be further translated into other formal languages, for instance AceRules with various semantics, OWL, and SWRL. Translating an ACE text into (a fragment of) first-order logic allows users to reason about the text, for instance to verify, to validate, and to query it. == Overview == As an overview of the current version 6.6 of ACE this section: Briefly describes the vocabulary Gives an account of the syntax Summarises the handling of ambiguity Explains the processing of anaphoric references. === Vocabulary === The vocabulary of ACE comprises: Predefined function words (e.g. determiners, conjunctions) Predefined phrases (e.g. "it is false that ...", "it is possible that ...") Content words (e.g. nouns, verbs, adjectives, adverbs). === Grammar === The grammar of ACE defines and constrains the form and the meaning of ACE sentences and texts. ACE's grammar is expressed as a set of construction rules. The meaning of sentences is described as a small set of interpretation rules. A Troubleshooting Guide describes how to use ACE and how to avoid pitfalls. ==== ACE texts ==== An ACE text is a sequence of declarative sentences that can be anaphorically interrelated. Furthermore, ACE supports questions and commands. ==== Simple sentences ==== A simple sentence asserts that something is the case—a fact, an event, a state. The temperature is −2 °C. A customer inserts 2 cards. A card and a code are valid. Simple ACE sentences have the following general structure: subject + verb + complements + adjuncts Every sentence has a subject and a verb. Complements (direct and indirect objects) are necessary for transitive verbs (insert something) and ditransitive verbs (give something to somebody), whereas adjuncts (adverbs, prepositional phrases) are optional. All elements of a simple sentence can be elaborated upon to describe the situation in more detail. To further specify the nouns customer and card, we could add adjectives: A trusted customer inserts two valid cards. possessive nouns and of-prepositional phrases: John's customer inserts a card of Mary. or variables as appositions: John inserts a card A. Other modifications of nouns are possible through relative sentences: A customer who is trusted inserts a card that he owns. which are described below since they make a sentence composite. We can also detail the insertion event, e.g. by adding an adverb: A customer inserts some cards manually. or, equivalently: A customer manually inserts some cards. or, by adding prepositional phrases: A customer inserts some cards into a slot. We can combine all of these elaborations to arrive at: John's customer who is trusted inserts a valid card of Mary manually into a slot A. ==== Composite sentences ==== Composite sentences are recursively built from simpler sentences through coordination, subordination, quantification, and negation. Note that ACE composite sentences overlap with what linguists call compound sentences and complex sentences. ===== Coordination ===== Coordination by and is possible between sentences and between phrases of the same syntactic type. A customer inserts a card and the machine checks the code. There is a customer who inserts a card and who enters a code. A customer inserts a card and enters a code. An old and trusted customer enters a card and a code. Note that the coordination of the noun phrases a card and a code represents a plural object. Coordination by or is possible between sentences, verb phrases, and relative clauses. A customer inserts a card or the machine checks the code. A customer inserts a card or enters a code. A customer owns a card that is invalid or that is damaged. Coordination by and and or is governed by the standard binding order of logic, i.e. and binds stronger than or. Commas can be used to override the standard binding order. Thus the sentence: A customer inserts a VisaCard or inserts a MasterCard, and inserts a code. means that the customer inserts a VisaCard and a code, or alternatively a MasterCard and a code. ===== Subordination ===== There are four constructs of subordination: relative sentences, if-then sentences, modality, and sentence subordination. Relative sentences starting with who, which, and that allow to add detail to nouns: A customer who is trusted inserts a card that he owns. With the help of if-then sentences we can specify conditional or hypothetical situations: If a card is valid then a customer inserts it. Note the anaphoric reference via the pronoun it in the then-part to the noun phrase a card in the if-part. Modality allows us to express possibility and necessity: A trusted customer can/must insert a card. It is possible/necessary that a trusted customer inserts a card. Sentence subordination comes in various forms: It is true/false that a customer inserts a card. It is not provable that a customer inserts a card. A clerk believes that a customer inserts a card. ===== Quantification ===== Quantification allows us to speak about all objects of a certain class (universal quantification), or to denote explicitly the existence of at least one object of this class (existential quantification). The textual occurrence of a universal or existential quantifier opens its scope that extends to the end of the sentence, or in coordinations to the end of the respective coordinated sentence. To express that all involved customers insert cards we can write Every customer inserts a card. This sentence means that each customer inserts a card that may, or may not, be the same as the one inserted by another customer. To specify that all customers insert the same card—however unrealistic that situation seems—we can write: A card is inserted by every customer. or, equivalently: There is a card that every customer inserts. To state that every card is inserted by a customer we write: Every card is inserted by a customer. or, somewhat indirectly: For every card there is a customer who inserts it. ===== Negation ===== Negation allows us to express that something is not the case: A customer does not insert a card. A card is not valid. To negate something for all objects of a certain class one uses no: No customer inserts more than 2 cards. or, there is no: There is no customer who inserts a card. To negate a complete statement one uses sentence negation: It is false that a customer inserts a card. These forms of negation are logical negations, i.e. they state that something is provably not the case. Negation as failure states that a state of affairs cannot be proved, i.e. there is no information whether the state of affairs is the case or not. It is not provable that a customer inserts a card. ==== Queries ==== ACE supports two forms of queries: yes/no-queries and wh-queries. Yes/no-queries ask for the existence or non-existence of a specified situation. If we specified: A customer inserts a card. then we can ask: Does a customer insert a card? to get a positive answer. Note that interrogative sentences always end with a question mark. With the help of wh-queries, i.e. queries with query words, we can interrogate a text for details of the specified situation. If we specified: A
Application software
Application software is software that is intended for end-user use – not operating, administering or programming a computer. It includes programs such as word processors, web browsers, media players, and mobile applications used in daily tasks. An application (app, application program, software application) is any program that can be categorized as application software. Application is a subjective classification that is often used to differentiate from system and utility software. Application software represents the user-facing layer of computing systems, designed to translate complex system capabilities into task-oriented, goal-driven workflows. Unlike system software, which focuses on hardware orchestration and resource management, application software is centered on problem abstraction, user interaction, and domain-specific functionality. The abbreviation app became popular with the 2008 introduction of the iOS App Store, to refer to applications for mobile devices such as smartphones and tablets. Later, with the release of the Mac App Store in 2010 and the Windows Store in 2011, it began to be used to refer to end-user software in general, regardless of platform. Applications may be bundled with the computer and its system software or published separately. Applications may be proprietary or open-source. == Terminology == === Meaning program and software === When used as an adjective, application can have a broader meaning than that described in this article. For example, concepts such as application programming interface (API), application server, application virtualization, application lifecycle management and portable application refer to programs and software in general. === Distinction between system and application software === The distinction between system and application software is subjective and has been the subject of controversy. For example, one of the key questions in the United States v. Microsoft Corp. antitrust trial was whether Microsoft's Internet Explorer web browser was part of its Windows operating system or a separate piece of application software. As another example, the GNU/Linux naming controversy is, in part, due to disagreement about the relationship between the Linux kernel and the operating systems built over this kernel. In some types of embedded systems, the application software and the operating system software may be indistinguishable by the user, as in the case of software used to control a VCR, DVD player, or microwave oven. The above definitions may exclude some applications that may exist on some computers in large organizations. For an alternative definition of an app: see Application Portfolio Management. === Killer application === A killer application (killer app, coined in the late 1980s) is an application that is so popular that it causes demand for its host platform to increase. For example, VisiCalc was the first modern spreadsheet software for the Apple II and helped sell the then-new personal computers into offices. For the BlackBerry, it was its email software. === Software suite === As software suite consists of multiple applications bundled together. They usually have related functions, features, and user interfaces, and may be able to interact with each other, e.g. open each other's files. Business applications often come in suites, e.g. Microsoft Office, LibreOffice and iWork, which bundle together a word processor, a spreadsheet, etc.; but suites exist for other purposes, e.g. graphics or music. == Ways to classify == As there so many applications and since their attributes vary so dramatically, there are many different ways to classify them. === By legal aspects === Proprietary software is protected under an exclusive copyright, and a software license grants limited usage rights. Such applications may allow add-ons from third parties. Free and open-source software (FOSS) can be run, distributed, sold, and extended for any purpose. FOSS software released under a free license may be perpetual and also royalty-free. Perhaps, the owner, the holder or third-party enforcer of any right (copyright, trademark, patent, or ius in re aliena) are entitled to add exceptions, limitations, time decays or expiring dates to the license terms of use. Public-domain software is a type of FOSS that is royalty-free and can be run, distributed, modified, reversed, republished, or created in derivative works without any copyright attribution and therefore revocation. It can even be sold, but without transferring the public domain property to other single subjects. Public-domain software can be released under a (un)licensing legal statement, which enforces those terms and conditions for an indefinite duration (for a lifetime, or forever). === By platform === An application can be categorized by the host platform on which it runs. Notable platforms include operating system (native), web browser, cloud computing and mobile. For example a web application runs in a web browser whereas a more traditional, native application runs in the environment of a computer's operating system. There has been a contentious debate regarding web applications replacing native applications for many purposes, especially on mobile devices such as smartphones and tablets. Web apps have indeed greatly increased in popularity for some uses, but the advantages of applications make them unlikely to disappear soon, if ever. Furthermore, the two can be complementary, and even integrated. === Horizontal vs. vertical === Application software can be seen as either horizontal or vertical. Horizontal applications are more popular and widespread, because they are general purpose, for example word processors or databases. Vertical applications are niche products, designed for a particular type of industry or business, or department within an organization. Integrated suites of software will try to handle every specific aspect possible of, for example, manufacturing or banking worker, accounting, or customer service. === By purpose === There are many types of application software: Enterprise Addresses the needs of an entire organization's processes and data flows, across several departments, often in a large distributed environment. Examples include enterprise resource planning systems, customer relationship management (CRM) systems, data replication engines, and supply chain management software. Departmental Software is a sub-type of enterprise software with a focus on smaller organizations or groups within a large organization. (Examples include travel expense management and IT Helpdesk.) Enterprise infrastructure Provides common capabilities needed to support enterprise software systems. (Examples include databases, email servers, and systems for managing networks and security.) Application platform as a service (aPaaS) A cloud computing service that offers development and deployment environments for application services. Knowledge worker Lets users create and manage information, often for and individual media editors may aid in multiple information worker tasks. Content access Used primarily to access content without editing, but may include software that allows for content editing. Such software addresses the needs of individuals and groups to consume digital entertainment and published digital content. (Examples include media players, web browsers, and help browsers.) Educational Related to content access software, but has the content or features adapted for use by educators or students. For example, it may deliver evaluations (tests), track progress through material, or include collaborative capabilities. Simulation Simulates physical or abstract systems for either research, training, or entertainment purposes. Media development Generates print and electronic media for others to consume, most often in a commercial or educational setting. This includes graphic-art software, desktop publishing software, multimedia development software, HTML editors, digital-animation editors, digital audio and video composition, and many others. Engineering Used in developing hardware and software products. This includes computer-aided design (CAD), computer-aided engineering (CAE), computer language editing and compiling tools, integrated development environments, and application programmer interfaces. Entertainment Refers to video games, screen savers, programs to display motion pictures or play recorded music, and other forms of entertainment which can be experienced through the use of a computing device. == Taxonomy == This section is a taxonomy of kinds of applications. This organization is but one of many different ways to organize them. A kind is included in only one category even if it logically fits in multiple. === General-purpose === Calculator Spreadsheet Web browser Web mapping E-commerce Social media === Communication === Chat Email Presentation software Phone Messages Networking software Web conferencing === Documentation === Desktop
LTX (text-to-video model)
LTX is a family of open source artificial intelligence video foundation models developed by Lightricks, and first released in November 2024. The latest models, LTX-2, create videos based on user prompts. They were preceded by LTX Video, which was released in 2024 as the company's first text-to-video model. LTX-2 is part of the LTX family of video generation models, which form the core technology, alongside LTX Studio, of the LTX ecosystem. == History == === Origins: LTX Video (2024–2025) === In November 2024 Lightricks publicly released its first text-to-video model, LTX Video. It was a 2-billion parameter model, available as open source. In May 2025 Lightricks launched LTXV-13b, a version with 13-billion parameters. Two months later, the model broke the 60 second barrier for generated video. === Release of LTX-2 (2025) === In October 2025 Lightricks announced its latest model, and renamed it LTX-2. The model was described as capable of generating synchronized audio and video at native 4K resolution and up to 50 frames per second (fps), using a variety of conditions and prompts, including text-to-video and image-to-video. Google highlighted the fact that LTX-2 was trained on its infrastructure, and saying it was "The first open source AI video generation model, powered by Google Cloud". Upon its release it was ranked in the top-3 models for image-to-video creation by Artificial Analysis, behind Kling 3.5 by Kling AI and Veo 3.1 by Google. Its text-to-image option was ranked 7th. In addition to its open-source release, Lightricks offers API access to LTX-2, allowing developers to generate videos from text and image prompts through a hosted service without running the model locally. === Open Source Release (2026) === In January 2026, Lightricks officially released the full open-source version of LTX-2, making the model’s complete codebase, weights, and associated tooling publicly available. In March 2026 the company released LTX-2.3, which was accompanied by a desktop video editor enabling the entire model to run locally on consumer hardware. == Technical features == === Advancements over LTX Video === LTX-2 builds upon the LTX Video architecture with several major improvements: Unified audio-video generation producing synchronized dialogue, ambience, and motion Native 4K rendering 50-fps output for cinematic motion Three operational modes (Fast, Pro, Ultra) More efficient diffusion pipelines enabling high fidelity on consumer GPUs === Core capabilities === Text-to-video generation Image-to-video generation Multimodal audiovisual synthesis High-resolution spatial and temporal coherence Configurable quality/performance settings Open-source distribution of weights and datasets == Reception == Initial reception to LTX-2 was broadly positive, with several technology and media outlets highlighting its open-source approach and multimodal capabilities. Open Source For You described LTX-2 as “one of the first AI video systems to combine 4K output, synchronized audio, and an open model release,” noting that it positioned Lightricks as a significant competitor to proprietary systems such as OpenAI's Sora and Google's Veo. IEA Green said that the model “could rewrite the AI filmmaking game,” emphasizing that its 50-fps rendering and unified audio-video generation made it suitable for professional studios and independent creators alike. AI News characterized LTX-2 as a “major step forward in the democratization of cinematic-quality video generation,” praising its consumer-grade hardware efficiency and multi-tier generation modes, while also noting ongoing challenges in long-form temporal stability. FinancialContent reported strong interest among creative agencies, attributing the attention to Lightricks’ decision to release model weights and datasets, which reviewers said enabled “a level of transparency not typically seen in commercial AI video models.” === Benchmarks and rankings === Upon release, LTX-2 ranked third for image-to-video creation in the Artificial Analysis benchmark, behind Kling 3.5 and Veo 3.1, while its text-to-video option ranked seventh. As of early 2026, it was the highest-ranked open-source model in the benchmark. === Limitations === Some early reviewers also pointed out quality limitations. The Ray3 technical review noted occasional inconsistencies in lip-sync and motion tracking during long scenes, though it stated these were “in line with the challenges faced by all current AI video diffusion models” and expected to improve with continued iteration. Like other diffusion-based video generators, LTX-2 can produce artifacts in complex multi-person scenes and may struggle with precise text rendering within generated video.
Scanimate
Scanimate is an analog computer animation (video synthesizer) system created by Lee Harrison III of Denver, Colorado. Harrison had developed its predecessor, ANIMAC, which generated used a motion capture system, based on a body suit with potentiometers. In contrast, Scanimate included TV technology. Scanimate's successor was called Caesar, and used a digital computer to control the analog system. The eight Scanimate systems were used to produce much of the video-based animation seen on television between most of the 1970s and early 1980s in commercials, promotions, and show openings. One of the major advantages the Scanimate system had over film-based animation and computer animation was the ability to create animations in real time. The speed with which animation could be produced on the system because of this, as well as its range of possible effects, helped it to supersede film-based animation techniques for television graphics. By the mid-1980s, it was superseded by digital computer animation, which produced sharper images and more sophisticated 3D imagery. Animations created on Scanimate and similar analog computer animation systems have a number of characteristic features that distinguish them from film-based animation: the motion is extremely fluid, using all 60 fields per second (in NTSC format video) or 50 fields (in PAL format video) rather than the 24 frames per second that film uses; the colors are much brighter and more saturated; and the images have a very "electronic" look that results from the direct manipulation of video signals through which the Scanimate produces the images. == How it works == A special high-resolution (around 945 lines) monochrome camera records high-contrast artwork. The image is then displayed on a high-resolution screen. Unlike a normal monitor, its deflection signals are passed through a special analog computer that enables the operator to bend the image in a variety of ways. The image is then shot from the screen by either a film camera or a video camera. In the case of a video camera, this signal is then fed into a colorizer, a device that takes certain shades of grey and turns it into color as well as transparency. The idea behind this is that the output of the Scanimate itself is always monochrome. Another advantage of the colorizer is that it gives the operator the ability to continuously add layers of graphics. This makes possible the creation of very complex graphics. This is done by using two video recorders. The background is played by one recorder and then recorded by another one. This process is repeated for every layer. This requires very high-quality video recorders (such as both the Ampex VR-2000 or IVC's IVC-9000 of Scanimate's era, the IVC-9000 being used quite frequently for Scanimate composition due to its very high generational quality between re-recordings). == Current usage == Two of the Scanimates are still in use at ZFx studios in Asheville, North Carolina. The original "Black Swan" R&D machine has been updated with more modern power supplies and can produce material in standard or 1080P high definition video. The "white Pearl" machine is the last one produced and is being kept in its original configuration for historical purposes by David Sieg at ZFx inc. The machines are installed in a working production environment with Grass Valley switchers, Kaleidoscope digital video effects systems, and Accom digital disk recorders for layering. == Use in television, music and films == === Music videos === Let's Groove by Earth, Wind & Fire Get Down on It by Kool & the Gang Blame It on the Boogie by The Jacksons Knock on Wood by Amii Stewart Popcorn Love by New Edition === TV programs/movies === === TV channels/home video/TV productions ===
Bigram
A bigram or digram is a sequence of two adjacent elements from a string of tokens, which are typically letters, syllables, or words. A bigram is an n-gram for n=2. The frequency distribution of every bigram in a string is commonly used for simple statistical analysis of text in many applications, including in computational linguistics, cryptography, and speech recognition. Gappy bigrams or skipping bigrams are word pairs which allow gaps (perhaps avoiding connecting words, or allowing some simulation of dependencies, as in a dependency grammar). == Applications == Bigrams, along with other n-grams, are used in most successful language models for speech recognition. Bigram frequency attacks can be used in cryptography to solve cryptograms. See frequency analysis. Bigram frequency is one approach to statistical language identification. Some activities in logology or recreational linguistics involve bigrams. These include attempts to find English words beginning with every possible bigram, or words containing a string of repeated bigrams, such as logogogue. == Bigram frequency in the English language == The frequency of the most common letter bigrams in a large English corpus is: th 3.56% of 1.17% io 0.83% he 3.07% ed 1.17% le 0.83% in 2.43% is 1.13% ve 0.83% er 2.05% it 1.12% co 0.79% an 1.99% al 1.09% me 0.79% re 1.85% ar 1.07% de 0.76% on 1.76% st 1.05% hi 0.76% at 1.49% to 1.05% ri 0.73% en 1.45% nt 1.04% ro 0.73% nd 1.35% ng 0.95% ic 0.70% ti 1.34% se 0.93% ne 0.69% es 1.34% ha 0.93% ea 0.69% or 1.28% as 0.87% ra 0.69% te 1.20% ou 0.87% ce 0.65%