AI App Builder Free

AI App Builder Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Linux color management

Linux color management has the same goal as the color management systems (CMS) for other operating systems, which is to achieve the best possible color reproduction throughout an imaging workflow from its source (camera, video, scanner, etc.), through imaging software (Digikam, darktable, RawTherapee, GIMP, Krita, Scribus, etc.), and finally onto an output medium (monitor, video projector, printer, etc.). In particular, color management attempts to enable color consistency across media and throughout a color-managed workflow. Linux color management relies on the use of accurate ICC (International Color Consortium) and DCP (DNG Color Profile) profiles describing the behavior of input and output devices, and color-managed applications that are aware of these profiles. These applications perform gamut conversions between device profiles and color spaces. Gamut conversions, based on accurate device profiles, are the essence of color management. Historically, color management was not an initial design consideration of the X Window System on which much of Linux graphics support rests, and thus color-managed workflows have been somewhat more challenging to implement on Linux than on other OS's such as Microsoft Windows or macOS. This situation is now being progressively remedied, and color management under Linux, while functional, has not yet acquired mature status. Although it is now possible to obtain a consistent color-managed workflow under Linux, certain problems still remain: The absence of a central user control panel for color settings. Some hardware devices for color calibration lack Linux drivers, firmware or accessory data. Since ICC color profiles are written to an open specification, they are compatible across operating systems. Hence, a profile produced on one OS should work on any other OS given the availability of the necessary software to read it and perform the gamut conversions. This can be used as a workaround for the lack of support for certain spectrophotometers or colorimeters under Linux: one can simply produce a profile on a different OS and then use it in a Linux workflow. Additionally, certain hardware, such as most printers and certain monitors, can be calibrated under another OS and then used in a fully color-managed workflow on Linux. The popular Ubuntu Linux distribution added initial color management in the 11.10 release (the "Oneiric Ocelot" release). == Requirements for a color-managed workflow == Accurate device profiles obtained with source or output characterization software. Correctly loaded video card lookup tables (LUTs) (or monitor profiles that do not require LUT adjustments). Color-managed applications that are configured to use a correct monitor profile and input/output profiles, with support for control over the rendering intent and black point compensation. Calibration and profiling requires: for input devices (scanner, camera, etc.) a color target which the profiling software will compare to the manufacturer-provided color values of the target. or for output devices (monitor, printer, etc.) a reading with a specific device (spectrophotometer, colorimeter or spectrocolorimeter) of the color patch values and comparing the measured values against the values originally sent for output. === Monitor calibration and profiling === One of the critical elements in any color-managed workflow is the monitor, because, at one step or another, handling and making color adaptation through imaging software is required for most images, thus the ability of the monitor to present accurate colors is crucial. Monitor color management consists of calibration and profiling. The first step, calibration, is done by adjusting the monitor controls and the output of the graphics card (via calibration curves) to match user-definable characteristics, such as brightness, white point and gamma. The calibration settings are stored in a .cal file. The second step, profiling (characterization), involves measuring the calibrated display's response and recording it in a color profile. The profile is stored in an .icc file ("ICC file"). For convenience, the calibration settings are usually stored together with the profile in the ICC file. Note that .icm files are identical to .icc files - the difference is only in the name. Seeing correct colors requires using a monitor profile-aware application, together with the same calibration used when profiling the monitor. Calibration alone does not yield accurate colors. If a monitor was calibrated before it was profiled, the profile will only yield correct colors when used on the monitor with the same calibration (the same monitor control adjustments and the same calibration curves loaded into the video card's lookup table). macOS has built-in support for loading calibration curves and installing a system-wide color profile. Windows 7 onward allows loading calibration curves, though this functionality must be enabled manually. Linux and older versions of Windows require using a standalone LUT loader. === Device profiles === ICC profiles are cross-platform and can thus be created on other operating systems and used under Linux. Monitor profiles, however, require some additional attention. Since a monitor profile depends both on the monitor itself and on the video card, a monitor profile should only be used with the same monitor and video card with which it was created. The monitor settings should not be adjusted after creating the profile. In addition, since most calibration software use LUT adjustments during calibration, the corresponding LUTs must be loaded every time the display server (X11, Wayland) is started (e.g. with every graphical login). In the unlikely case of a colorimeter being unsupported by Linux, a profile created under Windows or macOS can be used under Linux. === Display-channel lookup tables === There are two approaches to loading display channel LUTs: Create a profile that does not modify video card LUTs and thus does not require LUTs be loaded later on. Ideally, this approach would rely on DDC-capable monitors—the internal monitor settings of which are set via calibration software. Unfortunately, monitors capable of making these adjustments through DDC are not common and are generally expensive. There is only one calibration software on Linux that can interact with a DDC monitor. For mainstream monitors, a couple of options exist: BasICColor software, which works with most colorimeters on the market, allows one to adjust display output via the monitor interface, and then to choose a "Profile, do not calibrate" option. By doing this, one can create a profile that does not require video card LUT adjustments. For EyeOne devices, EyeOne Match allows the user to calibrate to "Native" gamma and white point targets, which results in the LUT adjustment curves displayed after the calibration as a simple, linear 1:1 mapping (a straight line from corner to corner). Both BasICColor and EyeOne Match do not presently run under Linux but they are capable of creating a profile that does not require LUT adjustments. Use an LUT loader to actually load the LUT adjustments contained within the profile prepared during calibration. According to the documentation, these loaders do not modify the video card LUT by itself, but achieve the same type of adjustment by modifying the X server gamma ramp. Loaders are available for Linux distributions that use X.org or XFree86—the two most popular X servers on Linux. Other X servers are not guaranteed to work with the currently available loaders. There are two LUT loaders available for Linux: Xcalib is one such loader, and although it is a command-line utility, it is quite easy to use. dispwin is a part of Argyll CMS. If, for any reason, the LUT cannot be loaded, it is still recommended to go through the initial stages of calibration where a user is asked by calibration software to make some manual adjustments to the monitor, as this will often improve display linearity and also provide information on its color temperature. This is especially recommended for CRT monitors. === Color-managed applications === In ICC-aware applications, it is important to make sure the correct profiles are assigned to devices, mainly to the monitor and the printer. Some Linux applications can auto-detect the monitor profile, while others requires that it is specified manually. Although there is no designated place to store device profiles on Linux, /usr/share/color/icc/ has become the de facto standard. Most applications running under WINE have not been fully tested for color accuracy. While 8-bpp programs can have some color resolution difficulties due to depth conversion errors, colors in higher-depth applications should be accurate, as long as those programs perform their gamut conversions based on the same monitor profile as that used for loading the LUT, granted that the corresponding LUT adjustments are loaded. == List of color-managed applications == darktabl
Read more →
Fansly

Fansly is a subscription-based social media platform that allows content creators to monetize exclusive content, including photos, videos, live streams, and direct messages. Operated by Select Media LLC, the platform is headquartered in Baltimore, Maryland. While the platform hosts a variety of content genres, it is primarily known for adult content and is frequently compared to OnlyFans. == History == Fansly was launched in 2020 by Micheal Etelis under Select Media LLC, which was incorporated in February 2020. The platform also operates through CY Media LTD, registered in Kamares, Cyprus, established in May 2021. The company has remained privately held with no disclosed external funding rounds or official valuation, operating as a bootstrapped entity. Based on Fansly's social media presence, which was created in November 2020, the platform did not begin gaining traction until early 2021 when creators started to become concerned about potential content policy changes at OnlyFans. In August 2021, OnlyFans announced it would ban sexually explicit content effective October 2021, citing pressure from banks involved in its payment processing. Although OnlyFans reversed the decision six days later, the announcement triggered a massive influx of users to Fansly; the platform received nearly 4,000 new creator applications in a single hour, causing its servers to crash from the surge in traffic. By August 21, 2021, Fansly had reached 2.1 million users. == Features and business model == Fansly operates as a B2C marketplace, taking a 20% commission on all transactions conducted on the platform, with creators retaining the remaining 80%. This commission rate is the same as that charged by its main competitor, OnlyFans. A distinguishing feature of Fansly is its tiered subscription model, which allows creators to set multiple subscription levels at different price points, each offering different perks such as exclusive content, chat access, or custom requests. By contrast, OnlyFans historically relied on a single-tier subscription model. Revenue streams on the platform include recurring subscriptions, one-time pay-per-view content purchases, tips, paid messaging, and live-streaming fees. The platform also features an algorithmic "For You" feed that helps users discover new creators, addressing a limitation of competitors that lack internal content promotion mechanisms. Additional features include content watermarking, geolocation blocking to control where content is visible, two-factor authentication, community polls, 24-hour stories, and social media integration with platforms such as Twitter and Twitch. Payouts are processed within one to two business days and support multiple methods, including bank transfers, Skrill, Paxum, and cryptocurrency. In December 2025, Fansly expanded its live-streaming capabilities, introducing ticketed access, private list gating, configurable chat permissions, stream goals, and interactive device integration. == Controversies == === OnlyFans anti-competitive allegations === In August 2022, a series of lawsuits were filed in the United States alleging that OnlyFans had bribed employees of Meta Platforms to place Instagram accounts of creators who also sold content on competitor platforms, including Fansly, onto a terrorist blacklist. The lawsuits alleged that adult performers had traffic driven away from their Instagram accounts after being falsely tagged as terror-related. OnlyFans denied awareness of such activity. The plaintiffs withdrew the bribery claim in July 2023, and the case was dismissed in August 2023. === Privacy class action === In June 2025, Select Media LLC (operating as Fansly) was the subject of a digital privacy class action lawsuit filed in Massachusetts District Court. The lawsuit alleged that the platform secretly collected and shared users' sensitive viewing data with Google and other third parties without consent. The case was brought on behalf of an estimated class of over 10,000 users across multiple states.
Read more →
Line splice

In electrical engineering and telecommunications, a line splice is a joint directly connecting lengths of electrical cables (electrical splice) or optical fibers (optical splice). The splices are often protected by sleeves. == Splicing of copper wires == The splicing of copper wires happens in the following steps: The cores are laid one above the other at the junction. The core insulation is removed. The wires are wrapped two to three times around each other (twisting). The bare veins on a length of about 3 cm "strangle" or "twist". In some cases, the strangulation is soldered. To isolate the splice, an insulating sleeve made of paper or plastic is pushed over it. The splicing of copper wires is mainly used on paper insulated wires. LSA techniques (LSA: soldering, screwing and stripping free) are used to connect copper wires, making the copper wires faster and easier to connect. LSA techniques include: Wire connection sleeves (AVH = Adernverbindungshülsen) and other crimp connectors. The two wires to be connected are inserted into the AVH without being stripped, which is then compressed with special pliers. The about 2 cm long AVH consist of contact, pressure and insulation. For wire connection strips (AVL = Adernverbindungsleisten) several pairs of wires (10 = AVL10 or 20 = AVL20) are inserted, the strip is then closed with a lid and pressed together with a hydraulic press, which ensures the connection. == Splicing of glass fibers == Fiber-optic cables are spliced using a special arc-splicer, with installation cables connected at their ends to respective "pigtails" - short individual fibers with fiber-optic connectors at one end. The splicer precisely adjusts the light-guiding cores of the two ends of the glass fibers to be spliced. The adjustment is done fully automatically in modern devices, whereas in older models this is carried out manually by means of micrometer screws and microscope. An experienced splicer can precisely position the fiber ends within a few seconds. Subsequently, the fibers are fused together (welded) with an electric arc. Since no additional material is added, such as gas welding or soldering, this is called a "fusion splice". Depending on the quality of the splicing process, attenuation values at the splice points are achieved by 0.3 dB, with good splices also below 0.02 dB. For newer generation devices, alignment is done automatically by motors. Here one differentiates core and jacket centering. At core centering (usually single-mode fibers), the fiber cores are aligned. A possible core offset with respect to the jacket is corrected. In the jacket centering (usually in multimode fibers), the fibers are adjusted to each other by means of electronic image processing in front of the splice. When working with good equipment, the damping value is according to experience at max. 0.1 dB. Measurements are made by means of special measuring devices including optical time-domain reflectometry (OTDR). A good splice should have an attenuation of less than 0.3 dB over the entire distance. Finished fiber optic splices are housed in splice boxes. One differentiates: Fusion splice Adhesive splicing Crimp splice or NENP (no-epoxy no-polish), mechanical splice
Read more →
Modulation error ratio

The modulation error ratio (MER) is a measure used to quantify the performance of a digital radio (or digital TV) transmitter or receiver in a communications system using digital modulation (such as QAM). A signal sent by an ideal transmitter or received by a receiver would have all constellation points precisely at the ideal locations, however various imperfections in the implementation (such as noise, low image rejection ratio, phase noise, carrier suppression, distortion, etc.) or signal path cause the actual constellation points to deviate from the ideal locations. Transmitter MER can be measured by specialized equipment, which demodulates the received signal in a similar way to how a real radio demodulator does it. Demodulated and detected signal can be used as a reasonably reliable estimate for the ideal transmitted signal in MER calculation. == Definition == An error vector is a vector in the I-Q plane between the ideal constellation point and the point received by the receiver. The Euclidean distance between the two points is its magnitude. The modulation error ratio is equal to the ratio of the root mean square (RMS) power (in Watts) of the reference vector to the power (in Watts) of the error. It is defined in dB as: M E R ( d B ) = 10 log 10 ⁡ ( P s i g n a l P e r r o r ) {\displaystyle \mathrm {MER(dB)} =10\log _{10}\left({P_{\mathrm {signal} } \over P_{\mathrm {error} }}\right)} where Perror is the RMS power of the error vector, and Psignal is the RMS power of ideal transmitted signal. MER is defined as a percentage in a compatible (but reciprocal) way: M E R ( % ) = P e r r o r P s i g n a l × 100 % {\displaystyle \mathrm {MER(\%)} ={\sqrt {P_{\mathrm {error} } \over P_{\mathrm {signal} }}}\times 100\%} with the same definitions. MER is closely related to error vector magnitude (EVM), but MER is calculated from the average power of the signal. MER is also closely related to signal-to-noise ratio. MER includes all imperfections including deterministic amplitude imbalance, quadrature error and distortion, while noise is random by nature.
Read more →
Region Based Convolutional Neural Networks

Region-based Convolutional Neural Networks (R-CNN) are a family of machine learning models for computer vision, and specifically object detection and localization. The original goal of R-CNN was to take an input image and produce a set of bounding boxes as output, where each bounding box contains an object and also the category (e.g. car or pedestrian) of the object. In general, R-CNN architectures perform selective search over feature maps outputted by a CNN. R-CNN has been extended to perform other computer vision tasks, such as: tracking objects from a drone-mounted camera, locating text in an image, and enabling object detection in Google Lens. Mask R-CNN is also one of seven tasks in the MLPerf Training Benchmark, which is a competition to speed up the training of neural networks. == History == The following covers some of the versions of R-CNN that have been developed. November 2013: R-CNN. April 2015: Fast R-CNN. June 2015: Faster R-CNN. March 2017: Mask R-CNN. December 2017: Cascade R-CNN is trained with increasing Intersection over Union (IoU, also known as the Jaccard index) thresholds, making each stage more selective against nearby false positives. June 2019: Mesh R-CNN adds the ability to generate a 3D mesh from a 2D image. == Architecture == For review articles see. === Selective search === Given an image (or an image-like feature map), selective search (also called Hierarchical Grouping) first segments the image by the algorithm in (Felzenszwalb and Huttenlocher, 2004), then performs the following: Input: (colour) image Output: Set of object location hypotheses L Segment image into initial regions R = {r1, ..., rn} using Felzenszwalb and Huttenlocher (2004) Initialise similarity set S = ∅ foreach Neighbouring region pair (ri, rj) do Calculate similarity s(ri, rj) S = S ∪ s(ri, rj) while S ≠ ∅ do Get highest similarity s(ri, rj) = max(S) Merge corresponding regions rt = ri ∪ rj Remove similarities regarding ri: S = S \ s(ri, r∗) Remove similarities regarding rj: S = S \ s(r∗, rj) Calculate similarity set St between rt and its neighbours S = S ∪ St R = R ∪ rt Extract object location boxes L from all regions in R === R-CNN === With R-CNN, prediction follows a two-step process. A preprocessing selective search step generates a large set of candidate objects (typically as many as 2000), known as regions of interest (ROI). These are forwarded to a CNN, which predicts an object class score and bounding box estimate, independently for each ROI. Importantly, the ROIs are heavily filtered to remove excess candidates. This is achieved using two mechanism. Filtering begins by removing ROIs assigned to the background category. This is a specialized category, which is scored by the CNN alongside other categories. An unfortunate reality is that remaining ROIs typically suffer from heavy duplication. Namely, multiple ROIs that cover same objects in the image are all assigned non-background categories. This is resolved by a heuristic non-maximum suppression (NMS) step. === Fast R-CNN === While the original R-CNN independently computed the neural network features on each of as many as two thousand regions of interest, Fast R-CNN runs the neural network once on the whole image. At the end of the network is a ROIPooling module, which slices out each ROI from the network's output tensor, reshapes it, and classifies it. As in the original R-CNN, the Fast R-CNN uses selective search to generate its region proposals. === Faster R-CNN === While Fast R-CNN used selective search to generate ROIs, Faster R-CNN integrates the ROI generation into the neural network itself. === Mask R-CNN === While previous versions of R-CNN focused on object detections, Mask R-CNN adds instance segmentation. Mask R-CNN also replaced ROIPooling with a new method called ROIAlign, which can represent fractions of a pixel.
Read more →
Gnowit

Gnowit (pronounced "know it") is a Canadian software company that provides automated, near-real-time monitoring of legislative, regulatory, and political activity across Canada. Its platform aggregates and analyzes information from government publications, parliamentary debates, committee, and proceedings to provide searchable alerts and reports for organizations monitoring public policy and regulatory developments. The system uses natural-language processing and machine learning techniques to organize and filter large volumes of public information.; the company reports that new publication documents are captured and millions of items are added to its repository daily. == History, Founders and Leadership == Gnowit was co-founded in Ottawa in 2010 by Shahzad Khan and Mohammad Al-Azzouni; Khan serves as chief executive officer. Khan holds a PhD in Computer Science from the University of Cambridge, has more than two decades of experience in AI/ML and computational linguistics, and has authored or co-authored 37 peer-reviewed publications and five patents. Traditionally, companies performed this analysis manually; Gnowit has delivered efficiencies achieved through AI innovations. The company has participated in several Canadian startup and accelerator programs, including Carleton University's Lead To Win initiative, the University of Ottawa's Startup Garage, the Invest Ottawa incubator, and the League of Innovators' BOOST program. === Kubernetes validation (2019–2020) === As part of a Canada's Centre of Excellence in Next Generation Networks (CENGN) project, Gnowit validated a containerized version of its web-intelligence software on Kubernetes. Between 2019 and 2020, Gnowit participated in a project with Canada’s Centre of Excellence in Next Generation Networks (CENGN) to test and scale its platform using containerized infrastructure based on Kubernetes. The initiative focused on improving scalability and supporting the company’s transition from a monolithic software architecture to a cloud-native deployment model. == Products and services == Gnowit markets several modules for public-affairs, compliance, and market-intelligence teams. Legislative & Regulatory Monitoring (vAnalyst). vAnalyst is a monitoring platform that tracks legislative and regulatory activity across Canadian federal, provincial, and territorial jurisdictions. The system aggregates parliamentary debates, bills, committee proceedings, and regulatory publications and provides searchable alerts and reporting tools. The product monitors more than two million web sources to surface relevant items quickly. Parliamentary Live (vAnalyst). Monitors live video feeds from parliamentary sessions and committees with same-day transcripts, AI-generated summaries, witness summaries, and motion detection; municipal coverage is offered as an option. Gnowit can avail transcripts up to two weeks before official releases. These transcripts enable users to navigate and review lengthy parliamentary sittings and committee discussions through searchable text. Municipal Monitoring (vAnalyst). The platform also tracks council meetings, agendas, bylaws, and other municipal government publications from hundreds of Canadian municipalities. The platform aggregates these sources into a single searchable interface for reviewing local government decisions. Curation Edge (analyst service). Curation Edge is an add-on service in which expert analysts work and collaborate with clients to develop a tailored curation guide and deliver daily newsletters or briefs on legislation and media. These reports provide concise summaries, relevant links, and optional metadata, prioritizing key updates with additional context and analysis. The service is customizable, including branding and formatting for executive audiences, and is intended to reduce information overload, support decision-making, and streamline the synthesis and distribution of information. === Coverage and sources === Gnowit monitors sources span Canadian government materials across federal, provincial, and territorial jurisdictions Hansard transcripts (All Jurisdictions, including committees), order papers, committee transcripts, gazettes, bills, acts and regulations, consultations, regulatory-agency publications, and global news media as well as press releases and council-meeting materials from hundreds of municipalities. == Partnerships and support == Gnowit reports collaborations with Canadian academic and ecosystem partners, including: Algonquin College Carleton University McGill University University of Ottawa Université du Québec en Outaouais (UQO) Queen's University The company also participated in the accelerator program at Invest Ottawa and has received support from Canadian research and innovation programs, including: NRC Industrial Research Assistance Program (NRC-IRAP) Mitacs Ontario Centre of Innovation (OCI) (formerly OCE) Gnowit has also referenced membership in the Southern Ontario Smart Computing Innovation Platform (Government of Canada profile: FedDev Ontario – SOSCIP overview). == Technology == Gnowit develops technology intended to support timely decision-making by delivering updates from monitored web sources as they are published. The platform applies artificial intelligence (AI) and machine learning (ML) techniques to monitor, capture, clean, analyze, filter, and organize text, and to generate concise briefs. Its technical approach combines Boolean queries, shallow language processing techniques, and machine learning classifiers within a self-service interface. The company has described its longer-term development framework in relation to a belief–desire–intention (BDI) model of intelligent agents on the web. Gnowit and its founder are listed as inventors/assignees on patents concerning multi-document clustering, salient-content extraction, and sentiment analysis methods that are consistent with these features: US 9,600,470 – Method and system relating to re-labelling multi-document clusters (assignee: Whyz Technologies Ltd.). US 9,336,202 – Method and system relating to salient content extraction for information retrieval (assignee: Whyz Technologies Ltd.). CA 2,865,184 C – Method and system relating to re-labelling multi-document clusters. CA 2,865,186 C – Procédé et système concernant l'analyse de sentiment d'un contenu (sentiment analysis; French record). CA 2,865,187 C – Method and system relating to salient content extraction for information retrieval. == Research and community == In January 2025, Gnowit personnel contributed to regulatory NLP by co-authoring a peer-reviewed paper at the 1st Regulatory NLP Workshop (RegNLP 2025), co-located with COLING in Abu Dhabi. Titled Unifying Large Language Models and Knowledge Graphs for Efficient Regulatory Information Retrieval and Answer Generation, the work introduces PolicyInsight, a framework that joins a dynamic policy data model and knowledge graph with LLMs to monitor policy texts, detect changes, and support retrieval and answer generation; the author list includes Shahzad Khan (CEO, Gnowit Inc.). (ACL Anthology, aclweb.org). Similar information-retrieval technologies are widely used for competitive intelligence, policy monitoring, and media analysis. == White paper == Gnowit has published a practical guide, Automated Government Information Monitoring, which outlines how GR and regulatory teams can design a monitoring and briefing workflow and describes Gnowit's automation features and export options (PDF, email, dashboards, CSV/JSON/XML/API).
Read more →
Artificial Intelligence for Digital Response

Artificial Intelligence for Digital Response (AIDR) is a free and open source platform to filter and classify social media messages related to emergencies, disasters, and humanitarian crises. It has been developed by the Qatar Computing Research Institute and awarded the Grand Prize for the 2015 Open Source Software World Challenge. Muhammad Imran stated that he and his team "have developed novel computational techniques and technologies, which can help gain insightful and actionable information from online sources to enable rapid decision-making" - according to him the system "combines human intelligence with machine learning techniques, to solve many real-world challenges during mass emergencies and health issues". == How to use == It can be used by logging in with ones Twitter credentials and by collecting tweets by specifying keywords or hashtags, like #ChileEarthquake, and possibly a geographical region as well. == Use == It has been deployed in conjunction with UNICEF in Zambia to classify short messages related to AIDS/HIV received through the U-Report platform. AIDR was used for the first time during the 2010 Pakistan floods. The first real test of AIDR took place during the 2014 Iquique earthquake in Chile. == Related talks and events == Muhammad Imran delivered a keynote talk on the science behind the AIDR system at the International Conference on Information Systems for Crisis Response And Management (ISCRAM). Abdelkader Lattab and Ji Lucas also presented the system at the 2016 QCRI-IBM Data Science Connect event.
Read more →
Digital signal

A digital signal is a signal that represents data as a sequence of discrete values; at any given time it can only take on, at most, one of a finite number of values. This contrasts with an analog signal, which represents continuous values; at any given time it represents a real number within an infinite set of values. Simple digital signals represent information in discrete bands of levels. All levels within a band of values represent the same information state. In most digital circuits, the signal can have two possible valid values; this is called a binary signal or logic signal. They are represented by two voltage bands: one near a reference value (typically termed as ground or zero volts), and the other a value near the supply voltage. These correspond to the two values zero and one (or false and true) of the Boolean domain, so at any given time a binary signal represents one binary digit (bit). Because of this discretization, relatively small changes to the signal levels do not leave the discrete envelope, and as a result are ignored by signal state sensing circuitry. As a result, digital signals have noise immunity; electronic noise, provided it is not too great, will not affect digital circuits, whereas noise always degrades the operation of analog signals to some degree. Digital signals having more than two states are occasionally used; circuitry using such signals is called multivalued logic. For example, signals that can assume three possible states are called three-valued logic. In a digital signal, the physical quantity representing the information may be a variable electric current or voltage, the intensity, phase or polarization of an optical or other electromagnetic field, acoustic pressure, the magnetization of a magnetic storage media, etcetera. Digital signals are used in all digital electronics, notably computing equipment and data transmission. == Definitions == The term digital signal has related definitions in different contexts. === In digital electronics === In digital electronics, a digital signal is a pulse amplitude modulated signal, i.e., a sequence of fixed-width electrical pulses or light pulses, each occupying one of a discrete number of levels of amplitude. A special case is a logic signal or a binary signal, which varies between a low and a high signal level. The pulse trains in digital circuits are typically generated by metal–oxide–semiconductor field-effect transistor (MOSFET) devices, due to their rapid on–off electronic switching speed and large-scale integration (LSI) capability. In contrast, bipolar junction transistors more slowly generate signals resembling sine waves. === In signal processing === In digital signal processing, a digital signal is a representation of a physical signal that is sampled and quantized. A digital signal is an abstraction that is discrete in time and amplitude. The signal's value only exists at regular time intervals, since only the values of the corresponding physical signal at those sampled moments are significant for further digital processing. The digital signal is a sequence of codes drawn from a finite set of values. The digital signal may be stored, processed or transmitted physically as a pulse-code modulation (PCM) signal. === In communications === In digital communications, a digital signal is a continuous-time physical signal, alternating between a discrete number of waveforms, representing a bitstream. The shape of the waveform depends on the transmission scheme, which may be either a line coding scheme allowing baseband transmission; or a digital modulation scheme, allowing passband transmission over long wires or over a limited radio frequency band. Such a carrier-modulated sine wave is considered a digital signal in literature on digital communications and data transmission, but considered as a bit stream converted to an analog signal in specific cases where the signal will be carried over a system meant for analog communication, such as an analog telephone line. In communications, sources of interference are usually present, and noise is frequently a significant problem. The effects of interference are typically minimized by filtering off interfering signals as much as possible and by using data redundancy. The main advantages of digital signals for communications are often considered to be noise immunity, and the ability, in many cases such as with audio and video data, to use data compression to greatly decrease the bandwidth that is required on the communication media. == Logic voltage levels == A waveform that switches representing the two states of a Boolean value (0 and 1, or low and high, or false and true) is referred to as a digital signal or logic signal or binary signal when it is interpreted in terms of only two possible digits. The two states are usually represented by some measurement of an electrical property: Voltage is the most common, but current is used in some logic families. Two ranges of voltages are typically defined for each logic family, which are frequently not directly adjacent. The signal is low when in the low range and high when in the high range, and in between the two ranges the behavior can vary between different types of gates. The clock signal is a special digital signal that is used to synchronize many digital circuits. The image shown can be considered the waveform of a clock signal. Logic changes are triggered either by the rising edge or the falling edge. The rising edge is the transition from a low voltage (level 1 in the diagram) to a high voltage (level 2). The falling edge is the transition from a high voltage to a low one. Although in a highly simplified and idealized model of a digital circuit, we may wish for these transitions to occur instantaneously, no real-world circuit is purely resistive, and therefore no circuit can instantly change voltage levels. This means that during a short, finite transition time, the output may not properly reflect the input, and will not correspond to either a logically high or low voltage. == Modulation == To create a digital signal, a signal must be modulated with a control signal to produce it. The simplest modulation, a type of unipolar encoding, is simply to switch on and off a DC signal so that high voltages represent a '1' and low voltages are '0'. In digital radio schemes, one or more carrier waves are amplitude, frequency or phase modulated by the control signal to produce a digital signal suitable for transmission. Asymmetric Digital Subscriber Line (ADSL) over telephone wires, does not primarily use binary logic; the digital signals for individual carriers are modulated with different-valued logics, depending on the Shannon capacity of the individual channel. == Clocking == Digital signals may be sampled by a clock signal at regular intervals by passing the signal through a flip-flop. When this is done, the input is measured at the clock edge and the signal from that time. The signal is then held steady until the next clock. This process is the basis of synchronous logic. Asynchronous logic also exists, which uses no single clock, and generally operates more quickly, and may use less power, but is significantly harder to design.
Read more →
Psychology of reasoning

The psychology of reasoning (also known as the cognitive science of reasoning) is the study of how people reason, often broadly defined as the process of drawing conclusions to inform how people solve problems and make decisions. It overlaps with psychology, philosophy, linguistics, cognitive science, artificial intelligence, logic, and probability theory. Psychological experiments on how humans and other animals reason have been carried out for over 100 years. An enduring question is whether or not people have the capacity to be rational. Current research in this area addresses various questions about reasoning, rationality, judgments, intelligence, relationships between emotion and reasoning, and development. == Everyday reasoning == One of the most obvious areas in which people employ reasoning is with sentences in everyday language. Most experimentation on deduction has been carried out on hypothetical thought, in particular, examining how people reason about conditionals, e.g., If A then B. Participants in experiments make the modus ponens inference, given the indicative conditional If A then B, and given the premise A, they conclude B. However, given the indicative conditional and the minor premise for the modus tollens inference, not-B, about half of the participants in experiments conclude not-A and the remainder concludes that nothing follows. The ease with which people make conditional inferences is affected by context, as demonstrated in the well-known selection task developed by Peter Wason. Participants are better able to test a conditional in an ecologically relevant context, e.g., if the envelope is sealed then it must have a 50 cent stamp on it compared to one that contains symbolic content, e.g., if the letter is a vowel then the number is even. Background knowledge can also lead to the suppression of even the simple modus ponens inference Participants given the conditional if Lisa has an essay to write then she studies late in the library and the premise Lisa has an essay to write make the modus ponens inference 'she studies late in the library', but the inference is suppressed when they are also given a second conditional if the library stays open then she studies late in the library. Interpretations of the suppression effect are controversial Other investigations of propositional inference examine how people think about disjunctive alternatives, e.g., A or else B, and how they reason about negation, e.g., It is not the case that A and B. Many experiments have been carried out to examine how people make relational inferences, including comparisons, e.g., A is better than B. Such investigations also concern spatial inferences, e.g. A is in front of B and temporal inferences, e.g. A occurs before B. Other common tasks include categorical syllogisms, used to examine how people reason about quantifiers such as All or Some, e.g., Some of the A are not B. For example if all A are B and some B are C, what (if anything) follows? == Theories of reasoning == There are several alternative theories of the cognitive processes that human reasoning is based on. One view is that people rely on a mental logic consisting of formal (abstract or syntactic) inference rules similar to those developed by logicians in the propositional calculus. Another view is that people rely on domain-specific or content-sensitive rules of inference. A third view is that people rely on mental models, that is, mental representations that correspond to imagined possibilities. A fourth view is that people compute probabilities. One controversial theoretical issue is the identification of an appropriate competence model, or a standard against which to compare human reasoning. Initially classical logic was chosen as a competence model. Subsequently, some researchers opted for non-monotonic logic and Bayesian probability. Research on mental models and reasoning has led to the suggestion that people are rational in principle but err in practice. Connectionist approaches towards reasoning have also been proposed. Despite the ongoing debate about the cognitive processes involved in human reasoning, recent research has shown that multiple approaches can be useful in modeling human thinking. For instance, studies have found that people's reasoning is often influenced by their prior beliefs, which can be modeled using Bayesian probability theory. Additionally, research on mental models has shown that people tend to reason about problems by constructing multiple mental representations of the situation, which can help them to identify relevant features and make inferences based on their understanding of the problem. Moreover, connectionist approaches to reasoning have also gained attention, which focus on the neural network models that can learn from data and generalize to new situations. == Development of reasoning == It is an active question in psychology how, why, and when the ability to reason develops from infancy to adulthood. Jean Piaget's theory of cognitive development posited general mechanisms and stages in the development of reasoning from infancy to adulthood. According to the neo-Piagetian theories of cognitive development, changes in reasoning with development come from increasing working memory capacity, increasing speed of processing, and enhanced executive functions and control. Increasing self-awareness is also an important factor. In their book The Enigma of Reason, the cognitive scientists Hugo Mercier and Dan Sperber put forward an "argumentative" theory of reasoning, claiming that humans evolved to reason primarily to justify our beliefs and actions and to convince others in a social environment. Key evidence for their theory includes the errors in reasoning that solitary individuals are prone to when their arguments are not criticized, such as logical fallacies, and how groups become much better at performing cognitive reasoning tasks when they communicate with one another and can evaluate each other's arguments. Sperber and Mercier offer one attempt to resolve the apparent paradox that the confirmation bias is so strong despite the function of reasoning naively appearing to be to come to veridical conclusions about the world. The study of the development of reasoning abilities is an ongoing area of research in psychology, and multiple factors have been proposed to explain how, why, and when reasoning develops from infancy to adulthood. Recent research has suggested that early experiences and social interactions play a critical role in the development of reasoning abilities. For example, studies have shown that infants as young as six months old can engage in basic logical reasoning, such as reasoning about the relationship between objects and their properties. Furthermore, research has highlighted the importance of parental interaction and cognitive stimulation in the development of children's reasoning abilities. Additionally, studies have suggested that cultural factors, such as educational practices and the emphasis on critical thinking, can also influence the development of reasoning skills across different populations. == Different sorts of reasoning == Philip Johnson-Laird trying to taxonomize thought, distinguished between goal-directed thinking and thinking without goal, noting that association was involved in unrelated reading. He argues that goal directed reasoning can be classified based on the problem space involved in a solution, citing Allen Newell and Herbert A. Simon. Inductive reasoning makes broad generalizations from specific cases or observations. In this process of reasoning, general assertions are made based on past specific pieces of evidence. This kind of reasoning allows the conclusion to be false even if the original statement is true. For example, if one observes a college athlete, one makes predictions and assumptions about other college athletes based on that one observation. Scientists use inductive reasoning to create theories and hypotheses. Philip Johnson-Laird distinguished inductive from deductive reasoning, in that the former creates semantic information while the later does not . In opposition, deductive reasoning is a basic form of valid reasoning. In this reasoning process a person starts with a known claim or a general belief and from there asks what follows from these foundations or how will these premises influence other beliefs. In other words, deduction starts with a hypothesis and examines the possibilities to reach a conclusion. Deduction helps people understand why their predictions are wrong and indicates that their prior knowledge or beliefs are off track. An example of deduction can be seen in the scientific method when testing hypotheses and theories. Although the conclusion usually corresponds and therefore proves the hypothesis, there are some cases where the conclusion is logical, but the generalization is not. For example, the argument, "All young girls wear skirts; Julie is a young
Read more →
Access-independent services

Access-independent service (AIS) is a service concept in which a service does not depend on guaranteed access network cooperation for service delivery. Telecommunications industry analyst Dean Bubley first used the term in a report on Telco-OTT in February 2012. Traditionally, most telecom company or internet service provider services are access-dependent, because they rely heavily on guaranteed access cooperation on the network the service is delivered over. For instance, traditional IP-based TV service (IPTV) delivered by a telecom company is generally a managed service. This means that IPTV service assumes the IPTV service provider has control over the access network that the IPTV service is delivered over, and network quality of service (QoS) guarantees are available for IPTV service delivery. As a result, the reach of a telecom company's IPTV service is generally restricted by the reach of the telecom company's access network. In contrast, services offered by non-traditional video content delivery service providers such as Netflix, Hulu, and Amazon Video are considered access-independent services. Netflix's video content streaming service, for example, dynamically adapts to network conditions in real-time to strive for the best overall quality of experience (QoE) and does not assume guaranteed cooperation from the underlying IP network, such as QoS. As a result, without considering content rights and different countries' government restrictions, the reach of Netflix's video content streaming service is, in theory, the reach of the Internet. Skype is another example of AIS, because Skype offers an IP-based telephony service over the Internet without depending on IP network cooperation guarantees other than basic IP network connectivity. In the context of telecom service delivery, the concept of access independent services is also commonly described by the term "over-the-top" (OTT) services. OTT service providers such as but not limited to Facebook, WeChat, and Netflix generally do not own or directly manage any wide-area access network to begin with, so they design their services for overall quality of experience, with no assumptions on guaranteed access network cooperation.
Read more →
Style sheet (web development)

A web style sheet is a form of separation of content and presentation for web design in which the markup (i.e., HTML or XHTML) of a webpage contains the page's semantic content and structure, but does not define its visual layout (style). Instead, the style is defined in an external style sheet file using a style sheet language such as CSS or XSLT. This design approach is identified as a "separation" because it largely supersedes the antecedent methodology in which a page's markup defined both style and structure. The philosophy underlying this methodology is a specific case of separation of concerns. == Benefits == Separation of style and content has advantages, but has only become practical after improvements in popular web browsers' CSS implementations. === Speed === Overall, users experience of a site utilising style sheets will generally be quicker than sites that do not use the technology. ‘Overall’ as the first page will probably load more slowly – because the style sheet AND the content will need to be transferred. Subsequent pages will load faster because no style information will need to be downloaded – the CSS file will already be in the browser’s cache. === Maintainability === Holding all the presentation styles in one file can reduce the maintenance time and reduces the chance of error, thereby improving presentation consistency. For example, the font color associated with a type of text element may be specified — and therefore easily modified — throughout an entire website simply by changing one short string of characters in a single file. The alternative approach, using styles embedded in each individual page, would require a cumbersome, time consuming, and error-prone edit of every file. === Accessibility === Sites that use CSS with either XHTML or HTML are easier to tweak so that they appear similar in different browsers (Chrome, Internet Explorer, Mozilla Firefox, Opera, Safari, etc.). Sites using CSS "degrade gracefully" in browsers unable to display graphical content, such as Lynx, or those so very old that they cannot use CSS. Browsers ignore CSS that they do not understand, such as CSS 3 statements. This enables a wide variety of user agents to be able to access the content of a site even if they cannot render the style sheet or are not designed with graphical capability in mind. For example, a browser using a refreshable braille display for output could disregard layout information entirely, and the user would still have access to all page content. === Customization === If a page's layout information is stored externally, a user can decide to disable the layout information entirely, leaving the site's bare content still in a readable form. Site authors may also offer multiple style sheets, which can be used to completely change the appearance of the site without altering any of its content. Most modern web browsers also allow the user to define their own style sheet, which can include rules that override the author's layout rules. This allows users, for example, to bold every hyperlink on every page they visit. Browser extensions like Stylish and Stylus have been created to facilitate management of such user style sheets. === Consistency === Because the semantic file contains only the meanings an author intends to convey, the styling of the various elements of the document's content is very consistent. For example, headings, emphasized text, lists and mathematical expressions all receive consistently applied style properties from the external style sheet. Authors need not concern themselves with the style properties at the time of composition. These presentational details can be deferred until the moment of presentation. === Portability === The deferment of presentational details until the time of presentation means that a document can be easily re-purposed for an entirely different presentation medium with merely the application of a new style sheet already prepared for the new medium and consistent with elemental or structural vocabulary of the semantic document. A carefully authored document for a web page can easily be printed to a hard-bound volume complete with headers and footers, page numbers and a generated table of contents simply by applying a new style sheet.
Read more →
Digital entertainment

Digital entertainment Industry includes, but is not restricted to, any combination of the following industries (that themselves have a considerable degree of overlap): digital media new media video on demand video games interactive entertainment online gambling mobile entertainment social media streaming services "Digital entertainment", largely a hard to define marketing term, rests upon entertainment technology and ultimately on the enabling basic technologies computers, Internet/World Wide Web, digital rights management, multimedia and streaming media. Apart from pure entertainment, the term rests upon the observation that already in 2011 in the UK, for example, "nearly half of people’s waking hours are spent using media content and communications services" ("screen time"). Digital entertainment is inextricably connected with digital marketing. People who follow influencers on social media for entertainment will receive a fair share of advertising at the same time. Digital merchandise is distributed with every computer game and popup ads or similar are ubiquitous in the online (gaming) world.
Read more →
Deep Learning Super Sampling

Deep Learning Super Sampling (DLSS) is a suite of real-time deep learning image enhancement and upscaling technologies developed by Nvidia that are available in a number of video games. The goal of these technologies is to allow the majority of the graphics pipeline to run at a lower resolution for increased performance, and then infer a higher resolution image from this that approximates the same level of detail as if the image had been rendered at this higher resolution. This allows for higher graphical settings or frame rates for a given output resolution, depending on user preference. All generations of DLSS are available on all RTX-branded cards from Nvidia in supported titles. However, the Frame Generation feature is only supported on RTX 40 series GPUs or newer and Multi Frame Generation is only available on 50 series GPUs. == History == Nvidia advertised DLSS as a key feature of GeForce RTX 20 series GPUs when they launched in September 2018. At that time, the results were limited to a few video games, namely Battlefield V, or Metro Exodus, because the algorithm had to be trained specifically on each game on which it was applied and the results were usually not as good as simple resolution upscaling. In 2019, Control shipped with ray tracing and an image processing algorithm that approximated DLSS, which did not use the Tensor Cores. In April 2020, Nvidia advertised and shipped an improved version of DLSS named DLSS 2 with driver version 445.75. DLSS 2.0 was available for a few existing games including Control and Wolfenstein: Youngblood, and would later be added to many newly released games and game engines such as Unreal Engine and Unity. This time Nvidia said that it used the Tensor Cores again, and that the AI did not need to be trained specifically on each game. Despite sharing the DLSS branding, the two iterations of DLSS differ significantly and are not backwards-compatible. In January 2025, Nvidia stated that there are over 540 games and apps supporting DLSS, and that over 80% of Nvidia RTX users activate DLSS. In March 2025, there were more than 100 games that support DLSS 4, according to Nvidia. By May 2025, over 125 games supported DLSS 4. The first video game console to use DLSS, the Nintendo Switch 2, was released on June 5, 2025. Nvidia announced DLSS 4.5 at CES 2026. In January 2026, Nvidia stated that over 250 games and applications support Multi Frame Generation. On March 16, 2026, at GTC 2026, Nvidia CEO Jensen Huang presented DLSS 5, a real-time AI model based on neural rendering that realistically enhances lighting and material surfaces at up to 4K resolution while retaining the developer's intended art style. It is planned to release in fall of 2026. In a blog post on its website, Nvidia has announced that DLSS 5 will be available in such games as Assassin's Creed Shadows, Delta Force, Hogwarts Legacy, Naraka: Bladepoint, Phantom Blade Zero, Resident Evil Requiem, Starfield, The Elder Scrolls IV: Oblivion Remastered, and more. On May 31, 2026, Nvidia announced an updated version of Ray Reconstruction for DLSS 4.5 in a blog post, scheduled for release on all RTX GPUs in August of the same year. They said it is designed to better embed spatial awareness into scenes and analyze engine data on movements and lighting conditions, resulting in a sharper, more stable, and less noisy image. === Release timeline === == Technology == === DLSS 1 === The first iteration of DLSS is a predominantly spatial image upscaler with two stages, both relying on convolutional auto-encoder neural networks. The first step is an image enhancement network which uses the current frame and motion vectors to perform edge enhancement, and spatial anti-aliasing. The second stage is an image upscaling step which uses the single raw, low-resolution frame to upscale the image to the desired output resolution. Using just a single frame for upscaling means the neural network itself must generate a large amount of new information to produce the high-resolution output, which can result in slight hallucinations such as leaves that differ in style to the source content. The neural networks are trained on a per-game basis by generating a "perfect frame" using traditional supersampling to 64 samples per pixel, as well as the motion vectors for each frame. The data collected must be as comprehensive as possible, including as many levels, times of day, graphical settings, resolutions, etc. as possible. This data is also augmented using common augmentations such as rotations, colour changes, and random noise to help generalize the test data. Training is performed on Nvidia's Saturn V supercomputer. This first iteration received a mixed response, with many criticizing the often soft appearance and artifacts along with glitches in certain situations; likely a side effect of the limited data from only using a single frame input to the neural networks which could not be trained to perform optimally in all scenarios and edge-cases. Nvidia also demonstrated the ability for the auto-encoder networks to learn the ability to recreate depth-of-field and motion blur, although this functionality has never been included in a publicly released product. === DLSS 2 === DLSS 2 is a temporal anti-aliasing upsampling (TAAU) implementation, using data from previous frames extensively through sub-pixel jittering to resolve fine detail and reduce aliasing. The data DLSS 2 collects includes: the raw low-resolution input, motion vectors, depth buffers, and exposure / brightness information. It can also be used as a simpler TAA implementation where the image is rendered at 100% resolution, rather than being upsampled by DLSS, Nvidia brands this as DLAA (Deep Learning Anti-Aliasing). TAA(U) is used in many modern video games and game engines; however, all previous implementations have used some form of manually written heuristics to prevent temporal artifacts such as ghosting and flickering. One example of this is neighborhood clamping which forcefully prevents samples collected in previous frames from deviating too much compared to nearby pixels in newer frames. This helps to identify and fix many temporal artifacts, but deliberately removing fine details in this way is analogous to applying a blur filter, and thus the final image can appear blurry when using this method. DLSS 2 uses a convolutional auto-encoder neural network trained to identify and fix temporal artifacts, instead of manually programmed heuristics as mentioned above. Because of this, DLSS 2 can generally resolve detail better than other TAA and TAAU implementations, while also removing most temporal artifacts. This is why DLSS 2 can sometimes produce a sharper image than rendering at higher, or even native resolutions using traditional TAA. However, no temporal solution is perfect, and artifacts (ghosting in particular) are still visible in some scenarios when using DLSS 2. Because temporal artifacts occur in most art styles and environments in broadly the same way, the neural network that powers DLSS 2 does not need to be retrained when being used in different games. Despite this, Nvidia does frequently ship new minor revisions of DLSS 2 with new titles, so this could suggest some minor training optimizations may be performed as games are released, although Nvidia does not provide changelogs for these minor revisions to confirm this. The main advancements compared to DLSS 1 include: Significantly improved detail retention, a generalized neural network that does not need to be re-trained per-game, and ~2x less overhead (~1–2 ms vs ~2–4 ms). It should also be noted that forms of TAAU such as DLSS 2 are not upscalers in the same sense as techniques such as ESRGAN or DLSS 1, which attempt to create new information from a low-resolution source; instead, TAAU works to recover data from previous frames, rather than creating new data. In practice, this means low resolution textures in games will still appear low-resolution when using current TAAU techniques. This is why Nvidia recommends game developers use higher resolution textures than they would normally for a given rendering resolution by applying a mip-map bias when DLSS 2 is enabled. === DLSS 3 === Augments DLSS 2 with improved image quality and the introduction of a new motion interpolation feature, called Frame Generation. The DLSS Frame Generation algorithm takes two rendered frames from the rendering pipeline and generates a new frame that smoothly transitions between them. For every frame rendered, one additional frame is generated. DLSS 3.0 makes use of a new generation Optical Flow Accelerator (OFA) included in the Ada Lovelace architecture of GeForce RTX 40 series GPUs and with that is exclusive to them. The new OFA is said to be faster and more accurate than the one already available in previous Turing and Ampere RTX GPUs. === DLSS 3.5 === DLSS 3.5 adds Ray Reconstruction, replacing multiple denoising algorithms with a single AI model trained o
Read more →
Creator economy

The creator economy, also known as influencer economy, is a platform-driven economy in which creators produce content, products, or services and distribute them directly to their audience through social media platforms and emerging technologies. This economic model is based on the ability of creators to build and maintain communities of users, monetizing their creative activity through multiple channels including advertising, sponsorships, product sales, crowdfunding, and subscription-based services. Creators include various professional categories such as social media influencers, YouTubers, bloggers, artists, online educators, podcasters, and independent professionals, who use platforms as infrastructure to reach their audience without necessarily relying on traditional intermediaries in the cultural and media industry. According to Goldman Sachs Research, the ongoing growth of the creator economy will likely benefit companies that possess a combination of factors, including a large global user base, access to substantial capital, robust AI-powered recommendation engines, versatile monetization tools, comprehensive data analytics, and integrated e-commerce options. Examples of creator economy software platforms include YouTube, TikTok, Instagram, Facebook, Twitch, Spotify, Substack, OnlyFans and Patreon. == History == The term "creator" was coined by YouTube in 2011 to be used instead of "YouTube star", an expression that at the time could only apply to famous individuals on the platform. The term has since become omnipresent and is used to describe anyone creating any form of online content. A number of platforms such as TikTok, Snapchat, YouTube, and Facebook have set up funds with which to pay creators. == Criticism == The large majority of content creators derive no monetary gain for their creations, with most of the benefits accruing to the platforms who can make significant revenues from their uploads. As few as 0.1% of creators are able to earn a living through their channels.
Read more →
New media

New media are communication technologies that enable or enhance interaction between users, as well as interaction between users and content. In the middle of the 1990s, the phrase "new media" became widely used as part of a sales pitch for the influx of interactive CD-ROMs for entertainment and education. The new media technologies, sometimes known as Web 2.0, include a wide range of web-related communication tools such as blogs, wikis, online social networking, virtual worlds, and other social media platforms. The phrase "new media" refers to computational media that share material online and through computers. New media inspire new ways of thinking about older media. Media do not replace one another in a clear, linear succession, instead evolving in a more complicated network of interconnected feedback loops . What is different about new media is how they specifically refashion traditional media and how older media refashion themselves to meet the challenges of new media. Unless they contain technologies that enable digital generative or interactive processes, broadcast television programs, non-interactive news websites, feature films, magazines, and books are not considered to be new media. The term "new media" stands in contrast to old media, which dominated the media landscape as a form of mass media for many years. == History == In the 1950s, connections between computing and radical art began to grow stronger. It was not until the 1980s that Alan Kay and his co-workers at Xerox PARC began to give the computability of a personal computer to the individual, rather than have a big organization be in charge of this. In the late 1980s and early 1990s, however, we seem to witness a different kind of parallel relationship between social changes and computer design. Although causally unrelated, conceptually, it makes sense that the Cold War and the design of the Web took place at exactly the same time. Writers and philosophers such as Marshall McLuhan were instrumental in the development of media theory during this period which is now famous declaration in Understanding Media: The Extensions of Man, that "the medium is the message" drew attention to the too often ignored influence media and technology themselves, rather than their "content," have on humans' experience of the world and on society broadly. Until the 1980s, media relied primarily upon print and analog broadcast models such as television and radio. The last twenty-five years have seen the rapid transformation into media which are predicated upon the use of digital technologies such as the Internet and video games. However, these examples are only a small representation of new media. The use of digital computers has transformed the remaining 'old' media, as suggested by the advent of digital television and online publications. Even traditional media forms such as the printing press have been transformed through the application of technologies by using of image manipulation software like Adobe Photoshop and desktop publishing tools. Andrew L. Shapiro argues that the "emergence of new, digital technologies signals a potentially radical shift of who is in control of information, experience and resources". W. Russell Neuman suggests that whilst the "new media" have technical capabilities to pull in one direction, economic and social forces pull back in the opposite direction. According to Neuman, "We are witnessing the evolution of a universal interconnected network of audio, video, and electronic text communications that will blur the distinction between interpersonal and mass communication; and between public and private communication". Neuman argues that new media will: Alter the meaning of geographic distance. Allow for a huge increase in the volume of communication. Provide the possibility of increasing the speed of communication. Provide opportunities for interactive communication. Allow forms of communication that were previously separate to overlap and interconnect. Consequently, it has been the contention of scholars such as Douglas Kellner and James Bohman that new media and particularly the Internet will provide the potential for a democratic postmodern public sphere, in which citizens can participate in well informed, non-hierarchical debate pertaining to their social structures. Contradicting these positive appraisals of the potential social impacts of new media are scholars such as Edward S. Herman and Robert McChesney who have suggested that the transition to new media has seen a handful of powerful transnational telecommunications corporations who achieve a level of global influence which was hitherto unimaginable. Scholars have highlighted both the positive and negative potential and actual implications of new media technologies, suggesting that some of the early work in new media studies was guilty of technologicaldeterminism – whereby the effects of media were determined by the technologies themselves, rather than by tracing the complex social networks that governed the development, funding, implementation, and future evolution of any technology. Based on the argument that people have a limited amount of time to spend on the consumption of different media, displacement theory argue that the viewership or readership of one particular outlet leads to the reduction in the amount of time spent by the individual on another. The introduction of new media, such as the internet, therefore reduces the amount of time individuals would spend on existing "old" media, which could ultimately lead to the end of such traditional media. == Definition == Although, there are several ways that new media may be described, Lev Manovich, in an introduction to The New Media Reader, defines new media by using eight propositions: New media versus cyberculture – Cyberculture is the various social phenomena that are associated with the Internet and network communications (blogs, online multi-player gaming), whereas new media is concerned more with cultural objects and paradigms (digital to analog television, smartphones). New media as computer technology used as a distribution platform – New media are the cultural objects which use digital computer technology for distribution and exhibition. e.g. (at least for now) Internet, Web sites, computer multimedia, Blu-ray disks etc. The problem with this is that the definition must be revised every few years. The term "new media" will not be "new" anymore, as most forms of culture will be distributed through computers. New media as digital data controlled by software – The language of new media is based on the assumption that, in fact, all cultural objects that rely on digital representation and computer-based delivery do share a number of common qualities. New media is reduced to digital data that can be manipulated by software as any other data. Now media operations can create several versions of the same object. An example is an image stored as matrix data which can be manipulated and altered according to the additional algorithms implemented, such as color inversion, gray-scaling, sharpening, rasterizing, etc. New media as the mix between existing cultural conventions and the conventions of software – New media today can be understood as the mix between older cultural conventions for data representation, access, and manipulation and newer conventions of data representation, access, and manipulation. The "old" data are representations of visual reality and human experience, and the "new" data is numerical data. The computer is kept out of the key "creative" decisions, and is delegated to the position of a technician. e.g. In film, software is used in some areas of production, in others are created using computer animation. New media as the aesthetics that accompanies the early stage of every new modern media and communication technology – While ideological tropes indeed seem to be reappearing rather regularly, many aesthetic strategies may reappear two or three times ... In order for this approach to be truly useful it would be insufficient to simply name the strategies and tropes and to record the moments of their appearance; instead, we would have to develop a much more comprehensive analysis which would correlate the history of technology with social, political, and economical histories or the modern period. New media as faster execution of algorithms previously executed manually or through other technologies – Computers are a huge speed-up of what were previously manual techniques. e.g. calculators. Dramatically speeding up the execution makes possible previously non-existent representational technique. This also makes possible of many new forms of media art such as interactive multimedia and video games. On one level, a modern digital computer is just a faster calculator, we should not ignore its other identity: that of a cybernetic control device. New media as the encoding of modernist avant-garde; new media as metamedia – Manovi
Read more →