AI And Analytics Course

AI And Analytics Course — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Image formation

  The study of image formation encompasses the radiometric and geometric processes by which 2D images of 3D objects are formed. In the case of digital images, the image formation process also includes analog to digital conversion and sampling. == Imaging == The imaging process is a mapping of an object to an image plane. Each point on the image corresponds to a point on the object. An illuminated object will scatter light toward a lens and the lens will collect and focus the light to create the image. The ratio of the height of the image to the height of the object is the magnification. The spatial extent of the image surface and the focal length of the lens determines the field of view of the lens. Image formation of mirror these have a center of curvature and its focal length of the mirror is half of the center of curvature. == Illumination == An object may be illuminated by the light from an emitting source such as the sun, a light bulb or a Light Emitting Diode. The light incident on the object is reflected in a manner dependent on the surface properties of the object. For rough surfaces, the reflected light is scattered in a manner described by the Bi-directional Reflectance Distribution Function (BRDF) of the surface. The BRDF of a surface is the ratio of the exiting power per square meter per steradian (radiance) to the incident power per square meter (irradiance). The BRDF typically varies with angle and may vary with wavelength, but a specific important case is a surface that has constant BRDF. This surface type is referred to as Lambertian and the magnitude of the BRDF is R/π, where R is the reflectivity of the surface. The portion of scattered light that propagates toward the lens is collected by the entrance pupil of the imaging lens over the field of view. == Field of view and imagery == The Field of view of a lens is limited by the size of the image plane and the focal length of the lens. The relationship between a location on the image and a location on the object is y = ftan(θ), where y is the max extent of the image plane, f is the focal length of the lens and θ is the field of view. If y is the max radial size of the image then θ is the field of view of the lens. While the image created by a lens is continuous, it can be modeled as a set of discrete field points, each representing a point on the object. The quality of the image is limited by the aberrations in the lens and the diffraction created by the finite aperture stop. == Pupils and stops == The aperture stop of a lens is a mechanical aperture which limits the light collection for each field point. The entrance pupil is the image of the aperture stop created by the optical elements on the object side of the lens. The light scattered by an object is collected by the entrance pupil and focused onto the image plane via a series of refractive elements. The cone of the focused light at the image plane is set by the size of the entrance pupil and the focal length of the lens. This is often referred to as the f-stop or f-number of the lens. f/# = f/D where D is the diameter of the entrance pupil. == Pixelation and color vs. monochrome == In typical digital imaging systems, a sensor is placed at the image plane. The light is focused on to the sensor and the continuous image is pixelated. The light incident on each pixel in the sensor will be integrated within the pixel and a proportional electronic signal will be generated. The angular geometric resolution of a pixel is given by atan(p/f), where p is the pitch of the pixel. This is also called the pixel field of view. The sensor may be monochrome or color. In the case of a monochrome sensor, the light incident on each pixel is integrated and the resulting image is a grayscale like picture. For color images, a mosaic color filter is typically placed over the pixels to create a color image. An example is a Bayer filter. The signal incident on each pixel is then digitized to a bit stream. == Image quality == The quality of an image is dependent upon both geometric and physical items. Geometrically, higher density of pixels across an image will give less blocky pixelation and thus a better geometric image quality. Lens aberrations also contribute to the quality of the image. Physically, diffraction due to the aperture stop will limit the resolvable spatial frequencies as a function of f-number. In the frequency domain, Modulation Transfer Function (MTF) is a measure of the quality of the imaging system. The MTF is a measure of the visibility of a sinusoidal variation in irradiance on the image plane as a function of the frequency of the sinusoid. It includes the effects of diffraction, aberrations and pixelation. For the lens, the MTF is the autocorrelation of the pupil function, so it accounts for the finite pupil extent and the lens aberrations. The sensor MTF is the Fourier Transform of the pixel geometry. For a square pixel, MTF(ξ) = sin(πξp)/πξp where p is the pixel width and ξ is the spatial frequency. The MTF of the combination of the lens and detector is the product of the two component MTFs. == Perception == Color images can be perceived via two means. In the case of computer vision the light incident on the sensor comprises the image. In the case of visual perception, the human eye has a color dependent response to light so this must be accounted for. This is important consideration when converting to grayscale. == Image formation in eye == The principal difference between the lens of the eye and an ordinary optical lens is that the former is flexible. The radius of the curvature of the anterior surface of the lens is greater than the radius of its posterior surface. The shape of the lens is controlled by tension in the fibers of the ciliary body. To focus on distant objects, the controlling muscles cause the lens to be relatively flattened. Similarly, these muscles allow the lens to become thicker in order to focus on objects near the eye. The distance between the center of the lens and the retina (focal length) varies from approximately 17 mm to about 14 mm, as the refractive power of the lens increases from its minimum to its maximum. When the eye focuses on an object farther away than about 3 m, the lens exhibits its lowest refractive power. When the eye focuses on a close object, the lens is most strongly refractive.

  Read more →
• 

  Adrozek

  Adrozek is malware that injects fake ads into online search results. Microsoft announced the malware threat on 10 December 2020, and noted that many different browsers are affected, including Google Chrome, Microsoft Edge, Mozilla Firefox and Yandex Browser. The malware was first detected in May 2020 and, at its peak in August 2020, controlled over 30,000 devices a day. But during the December 2020 announcement, Microsoft claimed "hundreds of thousands" of infected devices worldwide between May and September 2020. According to Microsoft, if not detected and blocked, Adrozek adds browser extensions, modifies a specific DLL per target browser, and changes browser settings to insert additional, unauthorized ads into web pages, often on top of legitimate ads from search engines. For each user tricked into clicking on the fake ads, the scammers earn affiliate advertising dollars. The malware has been observed to extract device data and, in some cases, steal credentials, sending them to remote servers. Users may unintentionally install the malware because of a drive-by download, by visiting a tampered website, opening an e-mail attachment, or clicking on a deceptive link or a deceptive pop-up window. The main malware program is downloaded to the “Programs Files” folder using file names such as Audiolava.exe, QuickAudio.exe, and converter.exe. According to PC Magazine, a good way to avoid, or mitigate, infection by Adrozek is to keep browser and related software programs up to date.

  Read more →
• 

  Glossary of computer graphics

  This is a glossary of terms relating to computer graphics. For more general computer hardware terms, see glossary of computer hardware terms. == 0–9 == 2D convolution Operation that applies linear filtering to image with a given two-dimensional kernel, able to achieve e.g. edge detection, blurring, etc. 2D image 2D texture map A texture map with two dimensions, typically indexed by UV coordinates. 2D vector A two-dimensional vector, a common data type in rasterization algorithms, 2D computer graphics, graphical user interface libraries. 2.5D Also pseudo 3D. Rendering whose result looks 3D while actually not being 3D or having great limitations, e.g. in camera degrees of freedom. 3D graphics pipeline A graphics pipeline taking 3D models and producing a 2D bitmap image result. 3D paint tool A 3D graphics application for digital painting of multiple texture map image channels directly onto a rotated 3D model, such as zbrush or mudbox, also sometimes able to modify vertex attributes. 3D scene A collection of 3D models and lightsources in world space, into which a camera may be placed, describing a scene for 3D rendering. 3D unit vector A unit vector in 3D space. 4D vector A common datatype in graphics code, holding homogeneous coordinates or RGBA data, or simply a 3D vector with unused W to benefit from alignment, naturally handled by machines with 4-element SIMD registers. 4×4 matrix A matrix commonly used as a transformation of homogeneous coordinates in 3D graphics pipelines. 7e3 format A packed pixel format supported by some graphics processing units (GPUs) where a single 32-bit word encodes three 10-bit floating-point color channels, each with seven bits of mantissa and three bits of exponent. == A == AABB Axis-aligned bounding box (sometimes called "axis oriented"), a bounding box stored in world coordinates; one of the simplest bounding volumes. Additive blending A compositing operation where d s t = d s t + s r c , {\displaystyle dst=dst+src,} without the use of an alpha channel, used for various effects. Also known as linear dodge in some applications. Affine texture mapping Linear interpolation of texture coordinates in screen space without taking perspective into account, causing texture distortion. Aliasing Unwanted effect arising when sampling high-frequency signals, in computer graphics appearing e.g. when downscaling images. Antialiasing methods can prevent it. Alpha channel An additional image channel (e.g. extending an RGB image) or standalone channel controlling alpha blending. Ambient lighting An approximation to the light entering a region from a wide range of directions, used to avoid needing an exact solution to the rendering equation. Ambient occlusion (AO) Effect approximating, in an inexpensive way, one aspect of global illumination by taking into account how much ambient light is blocked by nearby geometry, adding visual clues about the shape. Analytic model A mathematical model for a phenomenon to be simulated, e.g. some approximation to surface shading. Contrasts with Empirical models based purely on recorded data. Anisotropic filtering Advanced texture filtering improving on mipmapping, preventing aliasing while reducing blur in textured polygons at oblique angles to the camera. Anti-aliasing Methods for filtering and sampling to avoid visual artifacts associated with the uniform pixel grid in 3D rendering. Array texture A form of texture map containing an array of 2D texture slices selectable by a 3rd 'W' texture coordinate; used to reduce state changes in 3D rendering. Augmented reality Computer-rendered content inserted into the user's view of the real world. AZDO Approaching zero driver overhead, a set of techniques aimed at reducing the CPU overhead in preparing and submitting rendering commands in the OpenGL pipeline. A compromise between the traditional GL API and other high-performance low-level rendering APIs. == B == Back-face culling Culling (discarding) of polygons that are facing backwards from the camera. Baking Performing an expensive calculation offline, and caching the results in a texture map or vertex attributes. Typically used for generating lightmaps, normal maps, or low level of detail models. Barycentric coordinates Three-element coordinates of a point inside a triangle. Beam tracing Modification of ray tracing which instead of lines uses pyramid-shaped beams to address some of the shortcomings of traditional ray tracing, such as aliasing. Bicubic interpolation Extension of cubic interpolation to 2D, commonly used when scaling textures. Bilinear interpolation Linear interpolation extended to 2D, commonly used when scaling textures. Binding Selecting a resource (texture, buffer, etc.) to be referenced by future commands. Billboard A textured rectangle that keeps itself oriented towards the camera, typically used e.g. for vegetation or particle effects. Binary space partitioning (BSP) A data structure that can be used to accelerate visibility determination, used e.g. in Doom engine. Bit depth The number of bits per pixel, sample, or texel in a bitmap image (holding one or more image channels, typical values being 4, 8, 16, 24, 32) Bitmap Image stored by pixels. Bit plane A format for bitmap images storing 1 bit per pixel in a contiguous 2D array; Several such parallel arrays combine to produce the a higher-bit-depth image. Opposite of packed-pixel format. Blend operation A render state controlling alpha blending, describing a formula for combining source and destination pixels. Bone Coordinate systems used to control surface deformation (via Weight maps) during skeletal animation. Typically stored in a hierarchy, controlled by key frames, and other procedural constraints. Bounding box One of the simplest type of bounding volume, consisting of axis-aligned or object-aligned extents. Bounding volume A mathematically simple volume, such as a sphere or a box, containing 3D objects, used to simplify and accelerate spatial tests (e.g. for visibility or collisions). BRDF Bidirectional reflectance distribution functions (BRDFs), empirical models defining 4D functions for surface shading indexed by a view vector and light vector relative to a surface. Bump mapping Technique similar to normal mapping that instead of normal maps uses so called bump maps (height maps). BVH Bounding volume hierarchy is a tree structure on a set of geometric objects. == C == Camera A virtual camera from which rendering is performed, also sometimes referred to as 'eye'. Camera space A space with the camera at the origin, aligned with the viewer's direction, after the application of the world transformation and view transformation. Cel shading Cartoon-like shading effect. Clipping Limiting specific operations to a specific region, usually the view frustum. Clipping plane A plane used to clip rendering primitives in a graphics pipeline. These may define the view frustum or be used for other effects. Clip space Coordinate space in which clipping is performed. Clip window A rectangular region in screen space, used during clipping. A clip window may be used to enclose a region around a portal in portal rendering. CLUT A table of RGB color values to be indexed by a lower-bit-depth image (typically 4–8 bits), a form of vector quantization. Color bleeding Unwanted effect in texture mapping. A color from a border of unmapped region of the texture may appear (bleed) in the mapped result due to interpolation. Color channels The set of channels in a bitmap image representing the visible color components, i.e. distinct from the alpha channel or other information. Color resolution Command buffer A region of memory holding a set of instructions for a graphics processing unit for rendering a scene or portion of a scene. These may be generated manually in bare metal programming, or managed by low level rendering APIs, or handled internally by high level rendering APIs. Command list A group of rendering commands ready for submission to a graphics processing unit, see also Command buffer. Compute API An API for efficiently processing large amounts of data. Compute shader A compute kernel managed by a rendering API, with easy access to rendering resources. Cone tracing Modification of ray tracing which instead of lines uses cones as rays in order to achieve e.g. antialiasing or soft shadows. Connectivity information Indices defining [rendering primitive]s between vertices, possibly held in index buffers. describes geometry as a graph or hypergraph. CSG Constructive solid geometry, a method for generating complex solid models from boolean operations combining simpler modelling primitives. Cube mapping A form of environment reflection mapping in which the environment is captured on a surface of a cube (cube map). Culling Before rendering begins, culling removes objects that don't significantly contribute to the rendered result (e.g. being obscured or outside camera view). == D == Decal A "sticker" picture applied onto a surface (e.g. a

  Read more →
• 

  Webull

  Webull Corporation, often stylized as simply Webull, is a U.S.-based financial services holding company headquartered in St. Petersburg, Florida. It owns and operates the Webull electronic trading platform for self-directed retail investors. Depending on jurisdiction, the Webull platform offers trading in stocks, exchange-traded funds (ETFs), options, margin, bonds, cryptocurrency and futures, as well as market-data tools. Webull began operations in 2016 under Hunan Fumi Information Technology, a China-based financial technology company founded by Wang Anquan. It launched U.S. brokerage services through Webull Financial LLC in 2018 and expanded during the retail-trading boom of 2020 and 2021. In April 2025, Webull became a publicly traded company on the Nasdaq through a merger with special-purpose acquisition company SK Growth Opportunities Corporation. The company's U.S. brokerage revenue relies substantially on payment for order flow, with options trading accounting for the larger share of its order-flow rebates in 2025. Webull has faced regulatory actions related to options customer approvals, complaint handling, suspicious activity reporting, social-media marketing and customer disclosures. It has also faced scrutiny from U.S. lawmakers and state officials over its historical and operational ties to China and the handling of U.S. customer data. == History == === Founding === Webull was founded in 2016 under Hunan Fumi Information Technology, a China-based financial technology company, by Wang Anquan, a former employee of Alibaba Group and Xiaomi. Hunan Fumi Information Technology received backing from Xiaomi, Shunwei Capital, and other investors in China. Fumi Technology was a Hunan-based fintech start-up incubated by Xiaomi and raised about CNY200 million (approximately US$30 million) in a Series B financing round in 2018. On May 24, 2017, Webull Financial LLC was established as a Delaware limited liability company. It began offering brokerage services in the United States in May 2018. Wang hired Anthony Denier as CEO of the U.S. brokerage that year and the two mapped out their strategy on napkins at a Mexican restaurant in New York City. Webull Corporation was incorporated in the Cayman Islands in September 2019 as the group's holding company. === Retail trading boom === In May 2020, the company received SEC approval to launch a robo-advisor on its platform. By August 2020, the platform had over 11 million registered users, and in October 2020, it had 750,000 daily active users. Webull introduced options trading in 2020 and later added cryptocurrency trading through a separate digital-asset business. In November 2020, Webull began supporting cryptocurrency transactions. In December 2020, Webull launched trading services in Hong Kong. During the GameStop short squeeze in January 2021, Webull gained attention as some retail traders looked for alternatives to Robinhood. On January 27, 2021, Webull recorded its highest-ever number of active daily users, at 952,000, and the Webull app was downloaded across the Apple App and Google Play stores an estimated 100,000 times. That week, approximately 1.2 million people downloaded the Webull mobile app, which the company reported as a 1,548% week-over-week increase. On January 28, 2021, Webull was directed by its clearing house to temporarily halt buy orders for stocks affected by the GameStop short squeeze. In June 2021, Webull was reported to be considering a U.S. initial public offering that could raise up to $400 million. === Restructuring and expansion === Webull restructured its China-related corporate arrangements in 2022 and later stated that Hunan Fumi was no longer affiliated with the group. In 2022 and 2023, Webull expanded in several non-U.S. markets, including Singapore, Australia, South Africa, Japan, the United Kingdom and Indonesia. In June 2023, Webull moved cryptocurrency trading to a separate app called Webull Pay. By the end of 2023, Webull had 4.3 million funded accounts and US$8.2 billion in customer assets. In January 2024, Anthony Denier was promoted to group president of Webull Corporation. In November 2024, Webull launched overnight, or extended-hours, trading, expanding the trading window of U.S. stocks for users inside and outside the United States. === SPAC merger and Nasdaq listing === On February 28, 2024, Webull agreed to go public through a business combination with SK Growth Opportunities Corporation (NASDAQ: SKGR), a special-purpose acquisition company, in a deal that valued the company at approximately US$7.3 billion. The proposed valuation drew scrutiny because of Webull's limited financial disclosure at announcement, reliance on payment for order flow and small expected public float. SK Growth shareholders approved the business combination on March 30, 2025, and the transaction closed on April 10, 2025. Webull's Class A ordinary shares and warrants began trading on the Nasdaq on April 11, 2025 under the ticker symbols BULL and BULLW (incentive warrants traded under BULLZ until their redemption in June 2025). The merger brought Webull to the public market but generated little cash for the company: after shareholder redemptions, Webull disclosed net proceeds of US$430,066 from the transaction. After the listing, Webull's shares experienced extreme volatility, rising as much as 500% to US$79.56 on April 14, 2025, after closing at US$13.25 on the prior trading day. The initial post-listing surge increased the value of Webull holdings owned by earlier investors, including RIT Capital Partners, which had first invested in Webull in 2021. In April 2026, after Webull's shares had fallen about 70% over the previous year, the company authorized a US$100 million share repurchase program. == Business model and financials == Webull provides a self-directed electronic trading platform available through mobile, desktop and web applications. Depending on jurisdiction, the platform offers trading in stocks, exchange-traded funds, options, margin, futures, fixed income products, cryptocurrency, cash management features and market data tools. In the United States, Webull Financial LLC is a registered broker-dealer and member of FINRA and the Securities Investor Protection Corporation, while Webull operates in other markets through locally licensed brokerage subsidiaries. Webull operates a commission-free or low-cost brokerage model for self-directed retail investors. In the United States, a substantial part of its trading-related revenue comes from payment for order flow, while in some non-U.S. markets the company more commonly charges commissions directly to customers. The platform is aimed at more active retail investors, including users seeking options tools, extended-hours trading and real-time market data. For 2025, Webull reported total revenue of US$571.0 million, up from US$390.2 million in 2024. Equity and option order-flow rebates accounted for US$304.1 million, or 53.3% of revenue, making order-flow rebates the company's largest reported revenue category. Interest-related income accounted for US$154.3 million, handling charge income for US$87.3 million and other revenue for US$25.3 million. Options were the larger component of the company's order-flow rebates in 2025, generating US$210.0 million compared with US$94.2 million from equities. Webull also generates revenue from interest-related activities, including margin financing, customer bank deposits, stock lending and corporate bank deposits. The company has stated that its interest-related income is affected by interest rates, customer cash balances, margin balances and demand for stock lending. The company had approximately 20 million registered users worldwide as of February 2024. As of December 31, 2025, it reported 26.8 million registered users, 5.0 million funded accounts and US$24.6 billion in customer assets. As of March 2025, Webull operated in Hong Kong, Singapore, Australia, South Africa, Japan, the United Kingdom, the United States, Indonesia, Canada, Brazil, Thailand, Malaysia and Mexico. == Marketing and sponsorships == Webull has used paid digital advertising, referral incentives, free-stock promotions, affiliate marketing and sports sponsorships to acquire customers and promote its brand. In its 2025 annual filing, the company reported marketing and branding expenses of US$152.3 million in 2023, US$138.7 million in 2024 and US$135.9 million in 2025. Webull said most of its advertising and promotion costs were related to paid search and paid social advertising, and that it had reduced free-stock promotions while shifting toward deposit- and asset-transfer-based incentives. In September 2021, BSE Global, the parent company of the Brooklyn Nets and New York Liberty, entered into a global multi-year agreement with Webull. Under the agreement, Webull became an official sponsor and online brokerage partner of the teams, with branding that included a jersey patch on Brooklyn Nets uniforms. Spo

  Read more →
• 

  Starlight Information Visualization System

  Starlight is a software product originally developed at Pacific Northwest National Laboratory and now by Future Point Systems. It is an advanced visual analysis environment. In addition to using information visualization to show the importance of individual pieces of data by showing how they relate to one another, it also contains a small suite of tools useful for collaboration and data sharing, as well as data conversion, processing, augmentation and loading. The software, originally developed for the intelligence community, allows users to load data from XML files, databases, RSS feeds, web services, HTML files, Microsoft Word, PowerPoint, Excel, CSV, Adobe PDF, TXT files, etc. and analyze it with a variety of visualizations and tools. The system integrates structured, unstructured, geospatial, and multimedia data, offering comparisons of information at multiple levels of abstraction, simultaneously and in near real-time. In addition Starlight allows users to build their own named entity-extractors using a combination of algorithms, targeted normalization lists and regular expressions in the Starlight Data Engineer (SDE). As an example, Starlight might be used to look for correlations in a database containing records about chemical spills. An analyst could begin by grouping records according to the cause of the spill to reveal general trends. Sorting the data a second time, they could apply different colors based on related details such as the company responsible, age of equipment or geographic location. Maps and photographs could be integrated into the display, making it even easier to recognize connections among multiple variables. Starlight has been deployed to both the Iraq and Afghanistan wars and used on a number of large-scale projects. PNNL began developing Starlight in the mid-1990s, with funding from the Land Information Warfare Agency, a part of the Army Intelligence and Security Command and continued developed at the laboratory with funding from the NSA and the CIA. Starlight integrates visual representations of reports, radio transcripts, radar signals, maps and other information. The software system was recently honored with an R&D 100 Award for technical innovation. In 2006 Future Point Systems, a Silicon Valley startup, acquired rights to jointly develop and distribute the Starlight product in cooperation with the Pacific Northwest National Laboratory. The software is now also used outside of the military/intelligence communities in a number of commercial environments.

  Read more →
• 

  MyChild App

  MyChild App is an Android app that helps parents screen developmental disorders in their children between the age of 1 and 24 months. The app contains information for parents about the different stages of a child's development. == Background == Launched in 2015 on Google PlayStore, the app is a consumer product of the parent company, Time Ahead, Inc. Its office is based in Bhopal, Madhya Pradesh, India. As of August 2016, the app had been downloaded by 11,000+ users in 140+ countries and is a part of fbstart case study. == Funding == In 2015, MyChild App raised a seed round of $100k led by 500 Startups, followed by angel investors Samir Bangara, Anisha Mittal, Pallav Nadhani, Deobrat Singh, Lalit Mangal, Arihant Patni, Amit Gupta, Dr. Ritesh Malik, Saurab Paruthi, and Singapore Angel Network.

  Read more →
• 

  Z-order

  Z-order is an ordering of overlapping two-dimensional objects, such as windows in a stacking window manager, shapes in a vector graphics editor, or objects in a 3D application. One of the features of a typical GUI is that windows may overlap, so that one window hides part or all of another. When two windows overlap, their Z-order determines which one appears on top of the other. == Definition == The term "Z-order" refers to the order of objects along the Z-axis. In coordinate geometry, X typically refers to the horizontal axis (left to right), Y to the vertical axis (up and down), and Z refers to the axis perpendicular to the other two (forward or backward). One can think of the windows in a GUI as a series of planes parallel to the surface of the monitor. The windows are therefore stacked along the Z-axis, and the Z-order information thus specifies the front-to-back ordering of the windows on the screen. An analogy would be some sheets of paper scattered on top of a table, each sheet being a window, the table your computer screen, and the top sheet having the highest Z value. == Use == Typically, users of a GUI can affect the Z-order by selecting a window to be brought to the foreground (that is, "above" or "in front of" all the other windows). Some window managers allow interaction with windows while they are not in the foreground, while others will bring a window to the front whenever it receives input from the user. It is also possible for special windows to be designated "always on top"; these are then fixed to the top of the Z-order so that (with few exceptions) no other window can overlap them. When dealing with visual objects on a computer screen, an object with a Z-order of 1 would be visually "underneath" an object with a Z-order of 2 or greater. This is the same as making "layers" of objects where the Z-order determines what object is on top of another. An HTML page can use CSS to specify the Z-order so that some objects can be layered over others. Z-ordering is also used in 3D applications to determine object visibility based on overlap from other objects. This confers a speed advantage to the user as the computer does not need to render unseen objects. In practice, of course, some objects may be only partially obscured, and this is a complication that must be taken into account. In early real-time 3D graphics, Z-order was applied on a per-polygon basis to avoid using Z-buffer, which was considered expensive at the time. In modern 3D graphics, Z-order is used for order-dependent rendering, for example with semi-transparent objects. It can also be used to reduce the problem of Z-fighting, by either rendering farther objects first and then using weak inequality as the depth test or, conversely, rendering front-to-back and using strict inequality. == z-index == The actual number assigned to a particular place in the Z-order is sometimes known as the z-index. In particular the CSS property that sets the stack order of specific elements is known as the z-index. An element with greater stack order is always in front of another element with lower stack order. Negative values can also be used in the same manner. A negative value will appear behind a positive one. z-index only works on elements that have a position value (e.g. position: relative;) and for many coders, this one of the first things to investigate when debugging why the z-index isn't working. Like all other CSS properties, it can be set with JavaScript, with the following syntax:

  Read more →
• 

  Log shipping

  Log shipping is the process of automating the backup of transaction log files on a primary (production) database server, and then restoring them onto a standby server. This technique is supported by Microsoft SQL Server, 4D Server, MySQL, and PostgreSQL. Similar to replication, the primary purpose of log shipping is to increase database availability by maintaining a backup server that can replace a production server quickly. Other databases such as Adaptive Server Enterprise and Oracle Database support the technique but require the Database Administrator to write code or scripts to perform the work. Although the actual failover mechanism in log shipping is manual, this implementation is often chosen due to its low cost in human and server resources, and ease of implementation. In comparison, SQL server clusters enable automatic failover, but at the expense of much higher storage costs. Compared to database replication, log shipping does not provide as much in terms of reporting capabilities, but backs up system tables along with data tables, and locks the standby server from users' modifications. A replicated server can be modified (e.g. views) and is therefore unsuitable for failover purposes.

  Read more →
• 

  Whitelist

  A whitelist or allowlist is a list or register of entities that are being provided a particular privilege, service, mobility, access or recognition. Entities on the list will be accepted, approved and/or recognized. Whitelisting is the reverse of blacklisting, the practice of identifying entities that are denied, unrecognized, or ostracized. == Email whitelists == Spam filters often include the ability to "whitelist" certain sender IP addresses, email addresses or domain names to protect their email from being rejected or sent to a junk mail folder. These can be manually maintained by the user or system administrator - but can also refer to externally maintained whitelist services. === Non-commercial whitelists === Non-commercial whitelists are operated by various non-profit organizations, ISPs, and others interested in blocking spam. Rather than paying fees, the sender must pass a series of tests; for example, their email server must not be an open relay and have a static IP address. The operator of the whitelist may remove a server from the list if complaints are received. === Commercial whitelists === Commercial whitelists are a system by which an Internet service provider allows someone to bypass spam filters when sending email messages to its subscribers, in return for a pre-paid fee, either an annual or a per-message fee. A sender can then be more confident that their messages have reached recipients without being blocked, or having links or images stripped out of them, by spam filters. The purpose of commercial whitelists is to allow companies to reliably reach their customers by email. == Advertising whitelist == Many websites rely on ads as a source of revenue, but the use of ad blockers is increasingly common. Websites that detect an adblocker in use often ask for it to be disabled - or their site to be "added to the whitelist" - a standard feature of most adblockers. == Network whitelists == === LAN whitelists === A use for whitelists is in local area network (LAN) security. Many network admins set up MAC address whitelists, or a MAC address filter, to control who is allowed on their networks. This is used when encryption is not a practical solution or in tandem with encryption. However, it's sometimes ineffective because a MAC address can be faked. === IP whitelist === Firewalls can usually be configured to only allow data-traffic from/to certain (ranges of) IP-addresses. === Application whitelists === One approach in combating viruses and malware is to whitelist software which is considered safe to run, blocking all others. This is particularly attractive in a corporate environment, where there are typically already restrictions on what software is approved. Leading providers of application whitelisting technology include Bit9, Velox, McAfee, Lumension, ThreatLocker, Airlock Digital and SMAC. On Microsoft Windows, recent versions include AppLocker, which allows administrators to control which executable files are denied or allowed to execute. With AppLocker, administrators are able to create rules based on file names, publishers or file location that will allow certain files to execute. Rules can apply to individuals or groups. Policies are used to group users into different enforcement levels. For example, some users can be added to a report-only policy that will allow administrators to understand the impact before moving that user to a higher enforcement level. Linux systems typically have AppArmor and SE Linux features available which can be used to effectively block all applications which are not explicitly whitelisted, and commercial products are also available. On HP-UX introduced a feature called "HP-UX Whitelisting" on 11iv3 version. == Controversy regarding name == In 2018, a journal commentary on a report on predatory publishing was released making claims that "white" and "black" are racially charged terms that need to be avoided in instances such as "whitelist" and "blacklist". The premise of the journal is that "black" and "white" have negative and positive connotations respectively. It states that since "blacklisting" was first referred to during "the time of mass enslavement and forced deportation of Africans to work in European-held colonies in the Americas," the word is therefore related to race. There is no mention of "whitelist" and its origin or relation to race. This issue is most widely disputed in computing industries where "whitelist" and "blacklist" are prevalent (e.g. IP whitelisting). Despite the commentary nature of the journal, some companies and individuals in others have taken to replacing "whitelist" and "blacklist" with new alternatives such as "allow list" and "deny list". Those adopting this change consider using the "whitelist"/"blacklist" names as a code smell. Those that oppose these changes question its attribution to race, citing the same etymology quote that the 2018 journal uses. According to the remark, the term "blacklist" evolved from the term "black book" about a century ago. The term "black book" does not appear to have any etymology or sources that support racial associations, instead originating in the 1400s as a reference to "a list of people who had committed crimes or fallen out of favor with leaders", and popularized by King Henry VIII's literal use of a black book. Others also note the prevalence of positive and negative connotations to "white" and "black" in the Bible, predating attributions to skin tone and slavery. It wasn't until the 1960s Black Power movement that "Black" became a widespread word to refer to one's race as a person of color in America (alternate to African-American) lending itself to the argument that the negative connotation behind "black" and "blacklist" both predate attribution to race.

  Read more →
• 

  Molecular graphics

  Molecular graphics is the discipline and philosophy of studying molecules and their properties through graphical representation. IUPAC limits the definition to representations on a "graphical display device". Ever since Dalton's atoms and Kekulé's benzene, there has been a rich history of hand-drawn atoms and molecules, and these representations have had an important influence on modern molecular graphics. Colour molecular graphics are often used on chemistry journal covers artistically. == History == Prior to the use of computer graphics in representing molecular structure, Robert Corey and Linus Pauling developed a system for representing atoms or groups of atoms from hard wood on a scale of 1 inch = 1 angstrom connected by a clamping device to maintain the molecular configuration. These early models also established the CPK coloring scheme that is still used today to differentiate the different types of atoms in molecular models (e.g. carbon = black, oxygen = red, nitrogen = blue, etc). This early model was improved upon in 1966 by W.L. Koltun and are now known as Corey-Pauling-Koltun (CPK) models. The earliest efforts to produce models of molecular structure was done by Project MAC using wire-frame models displayed on a cathode ray tube in the mid 1960s. In 1965, Carroll Johnson distributed the Oak Ridge thermal ellipsoid plot (ORTEP) that visualized molecules as a ball-and-stick model with lines representing the bonds between atoms and ellipsoids to represent the probability of thermal motion. Thermal ellipsoid plots quickly became the de facto standard used in the display of X-ray crystallography data, and are still in wide use today. The first practical use of molecular graphics was a simple display of the protein myoglobin using a wireframe representation in 1966 by Cyrus Levinthal and Robert Langridge working at Project MAC. Among the milestones in high-performance molecular graphics was the work of Nelson Max in "realistic" rendering of macromolecules using reflecting spheres. Initially much of the technology concentrated on high-performance 3D graphics. During the 1970s, methods for displaying 3D graphics using cathode ray tubes were developed using continuous tone computer graphics in combination with electro-optic shutter viewing devices. The first devices used an active shutter 3D system, generating different perspective views for the left and right channel to provide the illusion of three-dimensional viewing. Stereoscopic viewing glasses were designed using lead lanthanum zirconate titanate (PLZT) ceramics as electronically controlled shutter elements. Active 3D glasses require batteries and work in concert with the display to actively change the presentation by the lenses to the wearer's eyes. Many modern 3D glasses use a passive, polarized 3D system that enables the wearer to visualize 3D effects based on their own perception. Passive 3D glasses are more common today since they are less expensive. The requirements of macromolecular crystallography also drove molecular graphics because the traditional techniques of physical model-building could not scale. The first two protein structures solved by molecular graphics without the aid of the Richards' Box were built with Stan Swanson's program FIT on the Vector General graphics display in the laboratory of Edgar Meyer at Texas A&M University: First Marge Legg in Al Cotton's lab at A&M solved a second, higher-resolution structure of staph. nuclease (1975) and then Jim Hogle solved the structure of monoclinic lysozyme in 1976. A full year passed before other graphics systems were used to replace the Richards' Box for modelling into density in 3-D. Alwyn Jones' FRODO program (and later "O") were developed to overlay the molecular electron density determined from X-ray crystallography and the hypothetical molecular structure. === Timeline === == Types == === Ball-and-stick models === In the ball-and-stick model, atoms are drawn as small sphered connected by rods representing the chemical bonds between them. === Space-filling models === In the space-filling model, atoms are drawn as solid spheres to suggest the space they occupy, in proportion to their van der Waals radii. Atoms that share a bond overlap with each other. === Surfaces === In some models, the surface of the molecule is approximated and shaded to represent a physical property of the molecule, such as electronic charge density. === Ribbon diagrams === Ribbon diagrams are schematic representations of protein structure and are one of the most common methods of protein depiction used today. The ribbon shows the overall path and organization of the protein backbone in 3D, and serves as a visual framework on which to hang details of the full atomic structure, such as the balls for the oxygen atoms bound to the active site of myoglobin in the adjacent image. Ribbon diagrams are generated by interpolating a smooth curve through the polypeptide backbone. α-helices are shown as coiled ribbons or thick tubes, β-strands as arrows, and non-repetitive coils or loops as lines or thin tubes. The direction of the polypeptide chain is shown locally by the arrows, and may be indicated overall by a colour ramp along the length of the ribbon.

  Read more →
• 

  System Service Descriptor Table

  The System Service Descriptor Table (SSDT) is an internal dispatch table within Microsoft Windows. == Function == The SSDT maps syscalls to kernel function addresses. When a syscall is issued by a user space application, it contains the service index as parameter to indicate which syscall is called. The SSDT is then used to resolve the address of the corresponding function within ntoskrnl.exe. In modern Windows kernels, two SSDTs are used: One for generic routines (KeServiceDescriptorTable) and a second (KeServiceDescriptorTableShadow) for graphical routines. A parameter passed by the calling userspace application determines which SSDT shall be used. == Hooking == Modification of the SSDT allows to redirect syscalls to routines outside the kernel. These routines can be either used to hide the presence of software or to act as a backdoor to allow attackers permanent code execution with kernel privileges. For both reasons, hooking SSDT calls is often used as a technique in both Windows kernel mode rootkits and antivirus software. In 2010, many computer security products which relied on hooking SSDT calls were shown to be vulnerable to exploits using race conditions to attack the products' security checks.

  Read more →
• 

  Tessellation (computer graphics)

  In computer graphics, tessellation is the dividing of datasets of polygons (sometimes called vertex sets) presenting objects in a scene into suitable structures for rendering. Especially for real-time rendering, data is tessellated into triangles, for example in OpenGL 4.0 and Direct3D 11. == In graphics rendering == A key advantage of tessellation for realtime graphics is that it allows detail to be dynamically added and subtracted from a 3D polygon mesh and its silhouette edges based on control parameters (often camera distance). In previously leading realtime techniques such as parallax mapping and bump mapping, surface details could be simulated at the pixel level, but silhouette edge detail was fundamentally limited by the quality of the original dataset. In Direct3D 11 pipeline (a part of DirectX 11), the graphics primitive is the patch. The tessellator generates a triangle-based tessellation of the patch according to tessellation parameters such as the TessFactor, which controls the degree of fineness of the mesh. The tessellation, along with shaders such as a Phong shader, allows for producing smoother surfaces than would be generated by the original mesh. By offloading the tessellation process onto the GPU hardware, smoothing can be performed in real time. Tessellation can also be used for implementing subdivision surfaces, level of detail scaling and fine displacement mapping. OpenGL 4.0 uses a similar pipeline, where tessellation into triangles is controlled by the Tessellation Control Shader and a set of four tessellation parameters. == In computer-aided design == In computer-aided design the constructed design is represented by a boundary representation topological model, where analytical 3D surfaces and curves, limited to faces, edges, and vertices, constitute a continuous boundary of a 3D body. Arbitrary 3D bodies are often too complicated to analyze directly. So they are approximated (tessellated) with a mesh of small, easy-to-analyze pieces of 3D volume—usually either irregular tetrahedra, or irregular hexahedra. The mesh is used for finite element analysis. The mesh of a surface is usually generated per individual faces and edges (approximated to polylines) so that original limit vertices are included into mesh. To ensure that approximation of the original surface suits the needs of further processing, three basic parameters are usually defined for the surface mesh generator: The maximum allowed distance between the planar approximation polygon and the surface (known as "sag"). This parameter ensures that mesh is similar enough to the original analytical surface (or the polyline is similar to the original curve). The maximum allowed size of the approximation polygon (for triangulations it can be maximum allowed length of triangle sides). This parameter ensures enough detail for further analysis. The maximum allowed angle between two adjacent approximation polygons (on the same face). This parameter ensures that even very small humps or hollows that can have significant effect to analysis will not disappear in mesh. An algorithm generating a mesh is typically controlled by the above three and other parameters. Some types of computer analysis of a constructed design require an adaptive mesh refinement, which is a mesh made finer (using stronger parameters) in regions where the analysis needs more detail.

  Read more →
• 

  Standard test image

  A standard test image is a digital image file used across different institutions to test image processing and image compression algorithms. By using the same standard test images, different labs are able to compare results, both visually and quantitatively. The images are in many cases chosen to represent natural or typical images that a class of processing techniques would need to deal with. Other test images are chosen because they present a range of challenges to image reconstruction algorithms, such as the reproduction of fine detail and textures, sharp transitions and edges, and uniform regions. == Historical origins == Test images as transmission system calibration material probably date back to the original Paris to Lyon pantelegraph link. Analogue fax equipment (and photographic equipment for the printing trade) were the largest user groups of the standardized image for calibration technology until the coming of television and digital image transmission systems. == Common test image resolutions == The standard resolution of the images is usually 512×512 or 720×576. Most of these images are available as TIFF files from the University of Southern California's Signal and Image Processing Institute. Kodak has released 768×512 images, available as PNGs, that was originally on Photo CD with higher resolution, that are widely used for comparing image compression techniques.

  Read more →
• 

  Path tracing

  Path tracing is a rendering algorithm in computer graphics that simulates how light interacts with objects and participating media to generate realistic (physically plausible) images. It is based on earlier, more limited, ray tracing algorithms. Path tracing is used to create photorealistic images for artistic purposes, and for applications such as architectural rendering and product design. It is also used to render frames for animated films, and visual effects for film and television. Because it can be very accurate and unbiased, it is commonly used to generate reference images when testing the quality of other rendering algorithms. The technique uses the Monte Carlo method to compute estimates of global illumination and simulate the ways different materials reflect (or scatter), transmit, absorb, and emit light. It can incorporate simple modeling of the effects of aperture and lens (depth of field, and bokeh) and shutter speed (motion blur), or more realistic simulation of the optical components in a camera. The algorithm works by describing illumination in a scene using the rendering equation, or light transport equation, and finding an approximate solution using Monte Carlo integration. An inefficient (but accurate) version of the algorithm can be very simple, and involves tracing a ray from the camera, allowing this ray to bounce in random directions as it hits different objects in the scene, and computing the amount of light transmitted along the path to the camera whenever the path encounters a light source. This process is repeated many times for each pixel (each repetition, with generated path and transmitted light, is called a sample), and the results are averaged. One main difference between this algorithm and standard ray tracing is that a single unbranching path is traced each time, while "Whitted-style" or "Cook-style" ray tracing recursively samples branching paths (e.g. when light is both reflected and refracted by a glass object). More practical versions incorporate improvements such as quasi-Monte Carlo methods (techniques that distribute samples more evenly), importance sampling (take more samples of paths that are likely to transport more light), and next event estimation (allow a very limited form of branching, and sample additional paths that connect to the lights more directly). Because path tracing uses random samples there is noise in the final image, which decreases as more samples are taken. Images commonly require many thousands of samples per pixel (spp) to reduce noise to an acceptable level, and denoising techniques (e.g. based on neural networks) are often used. Denoising is usually necessary when path tracing is used for real-time rendering in video games, because relatively few samples can be taken. Many alternative algorithms for path tracing have been developed, although they do not always outperform more straightforward implementations. These include bidirectional path tracing (which traces paths forwards from the light source as well as backwards from the camera), Metropolis light transport, and ways of combining path tracing with photon mapping. Video games often use biased versions of path tracing to improve performance (e.g. limiting the number of bounces in each path). A family of techniques called ReSTIR has been developed that can help real-time path tracing by sharing data between nearby pixels and consecutive frames. == History == Like all ray tracing methods, path tracing is based on ray casting, which Arthur Appel used for computer graphics rendering in the late 1960s. In 1980, John Turner Whitted published a recursive ray tracing algorithm that allows rendering images of scenes containing mirrored surfaces and refractive transparent objects. In 1984, Cook et al. described a form of ray tracing called distributed ray tracing, which uses Monte Carlo integration to render effects such as depth of field, motion blur, reflection from rough surfaces, and area lights. The same year, the radiosity method (not a ray tracing method) was published, which was the first physically based method for rendering diffuse global illumination. In 1986, Jim Kajiya published a paper exploring how to use distributed ray tracing to render physically-based global illumination, and this paper also introduced and named the method called "path tracing". Path tracing and other distributed ray tracing techniques were further refined in the late 1980s and early 1990s by researchers such as James Arvo and Peter Shirley, and by Greg Ward in the open source Radiance software. Despite being theoretically able to render any lighting, the original form of path tracing can sometimes be very inefficient (or noisy) for rendering light that is reflected or refracted before illuminating a visible surface, including diffuse global illumination where light enters an area through narrow gaps, because it traces paths only from the camera. To address this, variations of path tracing that trace paths from both the camera and from light sources, called bidirectional path tracing, were published in 1993 by Eric Lafortune and Yves Willems, and in 1997 by Eric Veach and Leonidas Guibas. In 1997 Veach and Guibas also published an alternative method called Metropolis light transport, which combines bidirectional path tracing with the Metropolis method. Veach's lengthy Ph.D. dissertation described both techniques, along with the theoretical background of path tracing; later, the book Physically Based Rendering (which won an Academy Award for Technical Achievement in 2014) helped to make information about path tracing more widely available. Path tracing requires tracing a large number of paths of light in order to produce an image with a visually acceptable amount of noise. This made path tracing very slow on computers available in the 1980s and 1990s, and noise remained a problem when trying to reproduce the style of earlier computer graphics animated films. Most animated films produced until around 2010, by studios such as Pixar, used rasterization-based rendering, with ray tracing used selectively for reflections (and later for precomputed or cached global illumination). However the speed of computers rapidly increased during the 1990s. Blue Sky Studios pioneered using Monte Carlo ray tracing for global illumination in animation, including in the 1998 short film "Bunny", but they did not disclose the precise techniques used. Path tracing gradually become more practical for film production in the early 2000s. The Arnold renderer, developed by Marcos Fajardo, was used by Sony Pictures Imageworks to produce the feature-length film Monster House, released in 2006. Pixar rewrote their RenderMan software to use path tracing, and released their first feature-length path-traced film Finding Dory in 2016. Although path tracing still had a large computational cost, animation studios discovered that less human labor was required when using it, for example because global illumination no longer needed to be faked by manually placing lights. The amount of noise present in path traced images still caused difficulties, particularly when rendering motion blur (which was used extensively by earlier animated films) but denoising techniques were developed to address this. New techniques were also needed for rendering hair and fur, and to handle the extremely large scenes sometimes required by films. Renderers such as Arnold, and Disney's Hyperion, originally only used CPUs for rendering, but as GPUs became more capable (and APIs such as CUDA, OpenCL, and OptiX were released) researchers and developers began adapting algorithms and implementations to use GPUs. GPUs can dramatically reduce rendering time: for example using a high-end GPU to accelerate portions of the rendering code can make it over 30 times faster than using only a high-end CPU. == Description == Kajiya's 1986 paper defined a recursive integral equation called the rendering equation, which describes a simplified form of light transport. Using Monte Carlo integration for the integral on the right side of the equation leads fairly directly to the path tracing algorithm: I ( x , x ′ ) = g ( x , x ′ ) [ ϵ ( x , x ′ ) + ∫ S ρ ( x , x ′ , x ″ ) I ( x ′ , x ″ ) d x ″ ] {\displaystyle I(x,x')=g(x,x')\left[\epsilon (x,x')+\int _{S}\rho (x,x',x'')I(x',x'')dx''\right]} This expresses I(x,x'), the light arriving at point x from point x', as the product of a geometry term, g(x,x'), which is 0 if there is something blocking the light between the two points and 1 otherwise, and the amount of light leaving point x' and traveling towards x. The light leaving point x' is the sum of the light emitted by the surface at x', and the integral of the light arriving at x' from all other points in the scene (the integration domain S) and being reflected towards x. The factor ρ(x,x',x''), which calculates how much light is reflected, must take into account the angles at which the light is arriving and leaving, and

  Read more →
• 

  Wargame (hacking)

  In hacking, a wargame (or war game) is a cyber-security challenge and mind sport in which the competitors must exploit or defend a vulnerability in a system or application, and/or gain or prevent access to a computer system. A wargame usually involves a capture the flag logic, based on pentesting, semantic URL attacks, knowledge-based authentication, password cracking, reverse engineering of software (often JavaScript, C and assembly language), code injection, SQL injections, cross-site scripting, exploits, IP address spoofing, forensics, and other hacking techniques. == Wargames for preparedness == Wargames are also used as a method of cyberwarfare preparedness. The NATO Cooperative Cyber Defence Centre of Excellence (CCDCOE) organizes an annual event, Locked Shields, which is an international live-fire cyber exercise. The exercise challenges cyber security experts through real-time attacks in fictional scenarios and is used to develop skills in national IT defense strategies. == Additional applications == Wargames can be used to teach the basics of web attacks and web security, giving participants a better understanding of how attackers exploit security vulnerabilities. Wargames are also used as a way to "stress test" an organization's response plan and serve as a drill to identify gaps in cyber disaster preparedness.

  Read more →