AI And Analytics Course

AI And Analytics Course — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Deep tomographic reconstruction

  Deep Tomographic Reconstruction is a set of methods for using deep learning methods to perform tomographic reconstruction of medical and industrial images. It uses artificial intelligence and machine learning, especially deep artificial neural networks or deep learning, to overcome challenges such as measurement noise, data sparsity, image artifacts, and computational inefficiency. This approach has been applied across various imaging modalities, including CT, MRI, PET, SPECT, ultrasound, and optical imaging == Historical background == Traditional tomographic reconstruction relies on analytic methods such as filtered back-projection, or iterative methods which incrementally compute inverse transformations from measurement data (e.g., Radon or Fourier transform data). However, these approaches are not sufficient for certain imaging techniques such as low-dose CT and fast MRI, or scenarios involving metal artifacts and patient motion. == Use in imaging modalities == === Computed tomography (CT) === In CT, deep learning models can be particularly effective in reducing radiation exposure while maintaining image quality. Deep neural networks can also be able to reconstruct images of fair quality from sparsely sampled data without sacrificing diagnostic performance. Deep learning-based generative AI models can reduce CT metal artifacts. === Magnetic resonance imaging (MRI) === In magnetic resonance imaging (MRI), deep learning can lead to reduced MRI motion artifacts, and increased acquisition speed, referred to as fast MRI. Despite suffering from disadvantages such as lower signal-to-noise ratio (SNR), deep learning can enhance image quality in low field MRI, making these systems clinically viable. === Positron emission tomography (PET) and single-photon emission CT (SPECT) === For PET imaging, deep learning models can provide substantial improvements in low-dose imaging and motion artifact correction. Also, deep learning can help SPECT for generation of attenuation background. A notable technique for PET denoising involves integrating MR data through multimodal networks, which use anatomical information from MRI to enhance PET image quality. === Ultrasound imaging === Deep learning can enhance ultrasound imaging by reducing speckle noise and motion blur. For ultrasound beamforming, deep neural networks can allow superior image quality with limited data at high speed. === Optical imaging and microscopy === Diffuse optical tomography, optical coherence tomography and microscopy can be improved by deep neural networks beyond traditional methods. Furthermore, deep learning can also enhance Photoacoustic imaging (see Deep learning in photoacoustic imaging), addressing challenges like high noise, low contrast, and limited resolution. Deep learning has also been applied to label-free live-cell imaging, where convolutional neural networks predict fluorescence labels from transmitted light images, a technique known as in silico labeling. This method can enable high-throughput, non-invasive cell analysis and phenotyping without the need for traditional fluorescent dyes.

  Read more →
• 

  Reverse proxy

  In computer networks, a reverse proxy or surrogate server is a proxy server that appears to any client to be an ordinary web server, but in reality merely acts as an intermediary that forwards the client's requests to one or more ordinary web servers. Reverse proxies help increase scalability, performance, resilience, and security, but they also carry a number of risks. Companies that run web servers often set up reverse proxies to facilitate the communication between an Internet user's browser and the web servers. An important advantage of doing so is that the web servers can be hidden behind a firewall on a company-internal network, and only the reverse proxy needs to be directly exposed to the Internet. Reverse proxy servers are implemented in popular open-source web servers. Dedicated reverse proxy servers are used by some of the biggest websites on the Internet. A reverse proxy is capable of tracking IP addresses of requests that are relayed through it as well as reading and/or modifying any non-encrypted traffic. However, this implies that anyone who has compromised the server could do so as well. Reverse proxies differ from forward proxies, which are used when the client is restricted to a private, internal network and asks a forward proxy to retrieve resources from the public Internet. == Uses == Large websites and content delivery networks use reverse proxies, together with other techniques, to balance the load between internal servers. Reverse proxies can keep a cache of static content, which further reduces the load on these internal servers and the internal network. It is also common for reverse proxies to add features such as compression or TLS encryption to the communication channel between the client and the reverse proxy. Reverse proxies can inspect HTTP headers, which, for example, allows them to present a single IP address to the Internet while relaying requests to different internal servers based on the URL of the HTTP request. Reverse proxies can hide the existence and characteristics of origin servers. This can make it more difficult to determine the actual location of the origin server / website and, for instance, more challenging to initiate legal action such as takedowns or block access to the website, as the IP address of the website may not be immediately apparent. Additionally, the reverse proxy may be located in a different jurisdiction with different legal requirements, further complicating the takedown process. Application firewall features can protect against common web-based attacks, like a denial-of-service attack (DoS) or distributed denial-of-service attacks (DDoS). Without a reverse proxy, removing malware or initiating takedowns (while simultaneously dealing with the attack) on one's own site, for example, can be difficult. In the case of secure websites, a web server may not perform TLS encryption itself, but instead offload the task to a reverse proxy that may be equipped with TLS acceleration hardware. (See TLS termination proxy.) A reverse proxy can distribute the load from incoming requests to several servers, with each server supporting its own application area. In the case of reverse proxying web servers, the reverse proxy may have to rewrite the URL in each incoming request in order to match the relevant internal location of the requested resource. A reverse proxy can reduce load on its origin servers by caching static content and dynamic content, known as web acceleration. Proxy caches of this sort can often satisfy a considerable number of website requests, greatly reducing the load on the origin server(s). A reverse proxy can optimize content by compressing it in order to speed up loading times. In a technique named "spoon-feeding", a dynamically generated page can be produced in its entirety and served to the reverse proxy, which can feed the page to the client as the connection allows. The program that generates the page need not remain open, thus releasing server resources during the possibly extended time the client requires to complete the transfer. Reverse proxies can operate wherever multiple web-servers must be accessible via a single public IP address. The web servers listen on different ports in the same machine, with the same local IP address or, possibly, on different machines with different local IP addresses. The reverse proxy analyzes each incoming request and delivers it to the right server within the local area network. Reverse proxies can perform A/B testing and multivariate testing without requiring application code to handle the logic of which version is served to a client. A reverse proxy can add access authentication to a web server that does not have any authentication. == Risks == When the transit traffic is encrypted and the reverse proxy needs to filter/cache/compress or otherwise modify or improve the traffic, the proxy first must decrypt and re-encrypt communications. This requires the proxy to possess the TLS certificate and its corresponding private key, extending the number of systems that can have access to non-encrypted data and making it a more valuable target for attackers. The vast majority of external data breaches happen either when hackers succeed in abusing an existing reverse proxy that was intentionally deployed by an organization, or when hackers succeed in converting an existing Internet-facing server into a reverse proxy server. Compromised or converted systems allow external attackers to specify where they want their attacks proxied to, enabling their access to internal networks and systems. Applications that were developed for the internal use of a company are not typically hardened to public standards and are not necessarily designed to withstand all hacking attempts. When an organization allows external access to such internal applications via a reverse proxy, they might unintentionally increase their own attack surface and invite hackers. If a reverse proxy is not configured to filter attacks or it does not receive daily updates to keep its attack signature database up to date, a zero-day vulnerability can pass through unfiltered, enabling attackers to gain control of the system(s) that are behind the reverse proxy server. Giving the reverse proxy of a third party access to private keys (for caching or optimizing content) places the entire triad of confidentiality, integrity and availability in the hands of the third party who operates the proxy. A reverse proxy is a single point of failure for the back-end services it fronts: an outage caused by misconfiguration, a denial-of-service attack, or a software fault can make every fronted service unreachable to outside clients, even when the back-end services themselves remain healthy. For example, a 2020 outage at Cloudflare briefly took down major sites and services that relied on its reverse-proxy edge, including Discord.

  Read more →
• 

  Data

  Data ( DAY-tə, US also DAT-ə, India: DEE-tə) is a collection of discrete or continuous values that conveys information, describing the quantity, quality, fact, statistics, other basic units of meaning, or simply sequences of symbols that may be further interpreted formally. A data point or datum is an individual value in a collection of data. Data is usually organized into structures such as tables that provide additional context and meaning, and may itself be used as data in larger structures. Data may be used as variables in a computational process. Data may represent abstract ideas or concrete measurements. Data is commonly used in scientific research, economics, and virtually every other form of human organizational activity. Examples of data sets include price indices (such as the consumer price index), unemployment rates, literacy rates, and census data. In this context, data represents the raw facts and figures from which useful information can be extracted. Data is collected using techniques such as measurement, observation, query, or analysis, and is typically represented as numbers or characters that may be further processed. Field data is data that is collected in an uncontrolled, in-situ environment. Experimental data is data that is generated in the course of a controlled scientific experiment. Data is analyzed using techniques such as calculation, reasoning, discussion, presentation, visualization, or other forms of post-analysis. Prior to analysis, raw data (or unprocessed data) is typically cleaned: Outliers are removed, and obvious instrument or data entry errors are corrected. Data can be seen as the smallest unit of factual information that can be used as a basis for calculation, reasoning, or discussion. Data can range from abstract ideas to concrete measurements, including, but not limited to, statistics. Thematically connected data presented in some relevant context can be viewed as information. Contextually connected pieces of information can then be described as data insights or intelligence. The stock of insights and intelligence that accumulate over time, resulting from the synthesis of data into information, can then be described as knowledge. Data has been described as "the new oil of the digital economy". Data, as a general concept, refers to the fact that some existing information or knowledge is represented or coded in some form suitable for better usage or processing. Advances in computing technologies have led to the advent of big data, which generally refers to very large quantities of data, typically at the petabyte scale. If restricted to traditional data analysis methods and computing, working with such large (and growing) datasets is difficult, even impossible. In response, the relatively new field of data science uses machine learning (and other artificial intelligence) methods that allow for efficient applications of analytic methods to big data. == Etymology and terminology == The Latin word data is the plural of datum, "(thing) given," and the neuter past participle of dare, "to give". The first English use of the word "data" is from the 1640s. The word "data" was first used to mean "transmissible and storable computer information" in 1946. The expression "data processing" was first used in 1954. When "data" is used more generally as a synonym for "information", it is treated as a mass noun in singular form. This usage is common in everyday language and in technical and scientific fields such as software development and computer science. One example of this usage is the term "big data". When used more specifically to refer to the processing and analysis of sets of data, the term retains its plural form. This usage is common in the natural sciences, life sciences, social sciences, software development and computer science, and grew in popularity in the 20th and 21st centuries. Some style guides do not recognize the different meanings of the term and simply recommend the form that best suits the target audience of the guide. For example, APA style as of the 7th edition requires "data" to be treated as a plural form. == Meaning == Data, information, knowledge, and wisdom are closely related concepts, but each has its role concerning the other, and each term has its meaning. According to a common view, data is collected and analyzed; data only becomes information suitable for making decisions once it has been analyzed in some fashion. One can say that the extent to which a set of data is informative to someone depends on the extent to which it is unexpected by that person. The amount of information contained in a data stream may be characterized by its Shannon entropy. Knowledge is the awareness of its environment that some entity possesses, whereas data merely communicates that knowledge. For example, the entry in a database specifying the height of Mount Everest is a datum that communicates a precisely measured value. This measurement may be included in a book along with other data on Mount Everest to describe the mountain in a manner useful for those who wish to decide on the best method to climb it. Awareness of the characteristics represented by this data is knowledge. Data are often assumed to be the least abstract concept, information the next least, and knowledge the most abstract. In this view, data becomes information by interpretation; e.g., the height of Mount Everest is generally considered "data", a book on Mount Everest geological characteristics may be considered "information", and a climber's guidebook containing practical information on the best way to reach Mount Everest's peak may be considered "knowledge". "Information" bears a diversity of meanings that range from everyday usage to technical use. This view, however, has also been argued to reverse how data emerges from information, and information from knowledge. Generally speaking, the concept of information is closely related to notions of constraint, communication, control, data, form, instruction, knowledge, meaning, mental stimulus, pattern, perception, and representation. Beynon-Davies uses the concept of a sign to differentiate between data and information; data is a series of symbols, while information occurs when the symbols are used to refer to something. Before the development of computing devices and machines, people had to manually collect data and impose patterns on it. With the development of computing devices and machines, these devices can also collect data. In the 2010s, computers were widely used in many fields to collect data and sort or process it, in disciplines ranging from marketing, analysis of social service usage by citizens to scientific research. These patterns in the data are seen as information that can be used to enhance knowledge. These patterns may be interpreted as "truth" (though "truth" can be a subjective concept) and may be authorized as aesthetic and ethical criteria in some disciplines or cultures. Events that leave behind perceivable physical or virtual remains can be traced back through data. Marks are no longer considered data once the link between the mark and observation is broken. Mechanical computing devices are classified according to how they represent data. An analog computer represents a datum as a voltage, distance, position, or other physical quantity. A digital computer represents a piece of data as a sequence of symbols drawn from a fixed alphabet. The most common digital computers use a binary alphabet, that is, an alphabet of two characters typically denoted "0" and "1". More familiar representations, such as numbers or letters, are then constructed from the binary alphabet. Some special forms of data are distinguished. A computer program is a collection of data, that can be interpreted as instructions. Most computer languages make a distinction between programs and the other data on which programs operate, but in some languages, notably Lisp and similar languages, programs are essentially indistinguishable from other data. It is also useful to distinguish metadata, that is, a description of other data. A similar yet earlier term for metadata is "ancillary data." The prototypical example of metadata is the library catalog, which is a description of the contents of books. == Data sources == With respect to ownership of data collected in the course of marketing or other corporate collection, data has been characterized according to party depending on how close the data is to the source or if it has been generated through additional processing. "Zero-party data" refers to data that customers "intentionally and proactively shares". This kind of data can come from a variety of sources, including: subscriptions, preference centers, quizzes, surveys, pop-up forms, and interactive digital experiences. "First-party data" may be collected by a company directly from its customers. The secure exchange of first-party data among companies can be done using data clean rooms. "S

  Read more →
• 

  Social media marketing

  Social media marketing is the use of social media platforms and websites to promote a product or service. Although the terms e-marketing and digital marketing are still dominant in academia, social media marketing is becoming more popular for practitioners and researchers. Social media platforms such as Facebook, LinkedIn, Instagram, and Twitter, among others, have built-in data analytics tools that companies can use to track the progress, success, and engagement of social media marketing campaigns. Companies address a range of stakeholders through social media marketing, including current and potential customers, current and potential employees, journalists, bloggers, and the general public. On a strategic level, social media marketing includes the management of a marketing campaign, governance, setting the scope (e.g. more active or passive use) and the establishment of a firm's desired social media "culture" and "tone". Firms that use social media marketing can allow customers and Internet users to post user-generated content (e.g., online comments, product reviews, etc.), also known as "earned media", rather than use marketer-prepared advertising copy. == Purposes and tactics == Social media may be employed in marketing as a communications tool that makes companies accessible to those who are interested in their product and visible to those who are not familiar with their products. It is used by companies to create buzz, learn from customers, and target them. Of the top 10 factors that correlate with a strong Google organic search, seven are social media-dependent. This means that if brands with little to no social media presence tend to show up less on Google searches. While platforms such as Twitter, Facebook and—in the past—Google+ have a larger number of monthly users, the visual media-sharing-based mobile platforms garner a higher interaction rate in comparison, and have registered the fastest growth, and have changed the ways in which consumers engage with brand content. Instagram has an interaction rate of 1.46% with an average of 130 million users monthly as opposed to Twitter, which has a .03% interaction rate with an average of 210 million monthly users. Unlike traditional media that are often cost-prohibitive to many companies, a social media strategy does not require significant financial investment. To this end, companies make use of platforms such as Facebook, Twitter, YouTube, TikTok and Instagram to reach audiences much wider than through traditional print, television, or radio advertisements alone at a fraction of the cost, as most social networking sites can be used at little or no cost (however, some websites charge companies for premium services). This has changed the ways that companies approach and interact with customers, as a substantial percentage of consumer interactions are now being carried out over online platforms with much higher visibility. Customers can post reviews of products and services, rate customer service, and ask questions or voice concerns directly to companies through social media platforms. According to Measuring Success, over 80% of consumers use the web to research products and services. Thus social media marketing is also used by businesses in order to build relationships of trust with consumers. To this aim, companies may hire personnel to specifically handle these social media interactions, who usually report under the title of online community managers. Handling these interactions in a satisfactory manner can result in an increase of consumer trust. To both this aim and to fix the public's perception of a company, three steps are taken in order to address consumer concerns: Identifying the extent of the social chatter Engaging the influencers to help Developing a proportional response == Strategies == === Passive approach === Social media can be a useful source of market information and a way to hear customers' perspectives. Blogs, content communities, and forums are platforms where individuals share their reviews and recommendations of brands, products, and services. Businesses are able to tap into and analyze customer voices and feedback generated in social media for marketing purposes. In this sense, social media is a relatively inexpensive source of market intelligence which can be used by marketers and managers to track and respond to consumer-identified problems and detect market opportunities. === Active approach === Social media can be used as a public relations tool, a direct marketing tool, and a communication channel to target very specific audiences, with social media influencers and social media personalities as effective customer engagement tools. This tactic is widely known as influencer marketing, which gives brands the opportunity to reach their target audience via a group of selected influencers advertising their product or service. Brands were projected to spend up to $15 billion on influencer marketing by 2022, per Business Insider Intelligence estimates, based on Mediakix data. The use of customer influencers, such as popular bloggers, can be an efficient and cost-effective method to launch new products or services. == Engagement == Engagement with the social web means that customers and stakeholders are active participants rather than passive spectators. An example of these are consumer advocacy groups and groups that criticize companies (e.g., lobby groups or advocacy organizations). The use of Social media in a business or political context allows people to express and share opinions about a company's products, services or business practices, or a government's actions. On social media, each participant becomes part of the marketing department (or a challenge to the marketing effort) as other customers read their comments or reviews. The effectiveness of social media marketing campaigns is dependent on the promotion of online engagement. With the advent of social media marketing, it has become increasingly important to gain customer interest in products and services, which can eventually be translated into buying behavior, or voting and donating behavior in a political context. New online marketing concepts of engagement and loyalty have emerged which aim to build customer participation and brand reputation. Engagement in social media for the purpose of a social media strategy is divided into two parts. The first is proactive, regular posting of new online content, which can be seen through digital photos, digital videos, text, and conversations. It is also represented through sharing of content and information from others via weblinks. The second part is reactive conversations, with social media users responding to those who reach out to others' social media profiles through comments or messages. == Campaigns == === Local businesses === Small businesses use social networking sites as a promotional technique. Businesses can follow individuals' social media usage in their local area and advertise specials and deals, which can be exclusive and in the form of "get a free drink with a copy of this tweet". This type of message encourages other locals to follow the business on their official websites in order to obtain the promotional deal. The business's brand visibility is enhanced in the process. Social networking sites are also used by small businesses to develop their own market research on new products and services. By encouraging their customers to give feedback on new product ideas, businesses can gain insights on whether or not a product may be accepted by their target market enough to merit full production. In addition, customers will feel the company has engaged them in the process of co-creation—the process in which the business uses customer feedback to create or modify a product or service to fill a need of the target market. Such feedback can be presented in various forms, such as surveys, contests, and polls. Social networking sites such as LinkedIn, also provide opportunities for small businesses to find candidates to fill staff positions. Review sites such as Yelp help small businesses build their reputation beyond brand visibility. Positive customer peer reviews help influence new prospects to purchase goods and services more than company advertising. == Benefits == Social Media Marketing allows companies to promote themselves to large, diverse audiences that could not be reached through traditional marketing such as phone and email-based advertising. Marketing on most social media platforms also comes at little to no cost, making it accessible to virtually any size business. Social Media Marketing accommodates personalized and direct marketing that targets specific demographics and markets. Companies can engage with customers directly, allowing them to obtain feedback and resolve issues almost immediately. Another advantage of social media marketing is that it's an ideal environment for a company to conduct market research. It can be used

  Read more →
• 

  Educational robotics

  Educational robotics teaches the design, analysis, application and operation of robots. Robots include articulated robots, mobile robots or autonomous vehicles. Educational robotics can be taught from elementary school to graduate programs. Robotics may also be used to motivate and facilitate the instruction other, often foundational, topics such as computer programming, artificial intelligence or engineering design. == Education and training == Robotics engineers design robots, maintain them, develop new applications for them, and conduct research to expand the potential of robotics. Robots have become a popular educational tool in some middle and high schools, as well as in numerous youth summer camps, raising interest in programming, artificial intelligence and robotics among students. First-year computer science courses at several universities now include programming of a robot in addition to traditional software engineering-based coursework. == Category of Educational robotics == The categories of educational robots seen as having more than one category. It can be alienated into different categories based on their physical design and coding method. Generally they are categorised as arm robots, wheeled mobile robots and humanoid robots. Tangibly, coded robots uses a physical means of coding instead of the screens coding. === Initiatives in schools === Leachim, was a robot teacher programmed with the class curricular, as well as certain biographical information on the 40 students whom it was programmed to teach. Leachim could synthesize human speech using Diphone synthesis. It was invented by Michael J. Freeman in 1974 and was tested in a fourth grade classroom in the Bronx, New York. === Post-secondary degree programs === From approximately 1960 through 2005, robotics education at post-secondary institutions took place through elective courses, thesis experiences and design projects offered as part of degree programs in traditional academic disciplines, such as mechanical engineering, electrical engineering, industrial engineering or computer science. Since 2005, more universities have begun granting degrees in robotics as a discipline in its own right, often under the name "Robotic Engineering". Based on a 2015 web-based survey of robotics educators, the degree programs and their estimates annual graduates are listed alphabetically below. Note that only official degree programs where the word "robotics" appears on the transcript or diploma are listed here; whereas degree programs in traditional disciplines with course concentrations or thesis topics related to robotics are deliberately omitted. === Certification === The Robotics Certification Standards Alliance (RCSA) is an international robotics certification authority that confers various industry- and educational-related robotics certifications. === Summer robotics camp === Several summer camp programs include robotics as part of their core curriculum. In addition, youth summer robotics programs are frequently offered by celebrated museums such as the American Museum of Natural History and The Tech Museum of Innovation in Silicon Valley, CA, just to name a few. There are of benefits that come from attending robotics camps. It teaches students how to use teamwork, resilience and motivation, and decision-making. Students learn teamwork because most camps involve exciting activities requiring teamwork. Resilience and motivation is expected because by completing the challenging programs, students feel talented and accomplished after they complete the program. Also students are given unique situations making them make decisions to further their situation. === Educational robotics in special education === Educational robotics can be a useful tool in early and special education. According to a journal on new perspectives in science education, educational robotics can help to develop abilities that promote autonomy and assist their integration into society. Social and personal skills can also be developed through educational robotics. Using Lego Mindstorms NXT, schoolteachers were able to work with middle school aged children in order to develop programs and improve the children's social and personal skills. Additionally, problem solving skills and creativity were utilized through the creation of artwork and scenery to house the robots. Other studies show the benefits of educational robotics in special education as promoting superior cognitive functions, including executive functions. This can lead to an increased ability in "problem solving, reasoning and planning in typically developing preschool children." Through eight weeks of weekly forty-five-minute group sessions using the Bee-Bot, an increase in interest, attention, and interaction between both peers and adults was found in the school and preschool-aged children with Down Syndrome. This study suggests that educational robotics in the classroom can also lead to an improvement in visuo-spatial memory and mental planning. Furthermore, executive functions seemed to be possible in one child during this study.

  Read more →
• 

  Cryptovirology

  Cryptovirology refers to the study of cryptography use in malware, such as ransomware and asymmetric backdoors. Traditionally, cryptography and its applications are defensive in nature, and provide privacy, authentication, and security to users. Cryptovirology employs a twist on cryptography, showing that it can also be used offensively. It can be used to mount extortion based attacks that cause loss of access to information, loss of confidentiality, and information leakage, tasks which cryptography typically prevents. The field was born with the observation that public-key cryptography can be used to break the symmetry between what an antivirus analyst sees regarding malware and what the attacker sees. The antivirus analyst sees a public key contained in the malware, whereas the attacker sees the public key contained in the malware as well as the corresponding private key (outside the malware) since the attacker created the key pair for the attack. The public key allows the malware to perform trapdoor one-way operations on the victim's computer that only the attacker can undo. == Overview == The field encompasses covert malware attacks in which the attacker securely steals private information such as symmetric keys, private keys, PRNG state, and the victim's data. Examples of such covert attacks are asymmetric backdoors. An asymmetric backdoor is a backdoor (e.g., in a cryptosystem) that can be used only by the attacker, even after it is found. This contrasts with the traditional backdoor that is symmetric, i.e., anyone that finds it can use it. Kleptography, a subfield of cryptovirology, is the study of asymmetric backdoors in key generation algorithms, digital signature algorithms, key exchanges, pseudorandom number generators, encryption algorithms, and other cryptographic algorithms. The NIST Dual EC DRBG random bit generator has an asymmetric backdoor in it. The EC-DRBG algorithm utilizes the discrete-log kleptogram from kleptography, which by definition makes the EC-DRBG a cryptotrojan. Like ransomware, the EC-DRBG cryptotrojan contains and uses the attacker's public key to attack the host system. The cryptographer Ari Juels indicated that NSA effectively orchestrated a kleptographic attack on users of the Dual EC DRBG pseudorandom number generation algorithm and that, although security professionals and developers have been testing and implementing kleptographic attacks since 1996, "you would be hard-pressed to find one in actual use until now." Due to public outcry about this cryptovirology attack, NIST rescinded the EC-DRBG algorithm from the NIST SP 800-90 standard. Covert information leakage attacks carried out by cryptoviruses, cryptotrojans, and cryptoworms that, by definition, contain and use the public key of the attacker is a major theme in cryptovirology. In "deniable password snatching," a cryptovirus installs a cryptotrojan that asymmetrically encrypts host data and covertly broadcasts it. This makes it available to everyone, noticeable by no one (except the attacker), and only decipherable by the attacker. An attacker caught installing the cryptotrojan claims to be a virus victim. An attacker observed receiving the covert asymmetric broadcast is one of the thousands, if not millions of receivers, and exhibits no identifying information whatsoever. The cryptovirology attack achieves "end-to-end deniability." It is a covert asymmetric broadcast of the victim's data. Cryptovirology also encompasses the use of private information retrieval (PIR) to allow cryptoviruses to search for and steal host data without revealing the data searched for even when the cryptotrojan is under constant surveillance. By definition, such a cryptovirus carries within its own coding sequence the query of the attacker and the necessary PIR logic to apply the query to host systems. == History == The first cryptovirology attack and discussion of the concept was by Adam L. Young and Moti Yung, at the time called "cryptoviral extortion" and it was presented at the 1996 IEEE Security & Privacy conference. In this attack, a cryptovirus, cryptoworm, or cryptotrojan contains the public key of the attacker and hybrid encrypts the victim's files. The malware prompts the user to send the asymmetric ciphertext to the attacker who will decipher it and return the symmetric decryption key it contains for a fee. The victim needs the symmetric key to decrypt the encrypted files if there is no way to recover the original files (e.g., from backups). The 1996 IEEE paper predicted that cryptoviral extortion attackers would one day demand e-money, long before Bitcoin even existed. Many years later, the media relabeled cryptoviral extortion as ransomware. In 2016, cryptovirology attacks on healthcare providers reached epidemic levels, prompting the U.S. Department of Health and Human Services to issue a Fact Sheet on Ransomware and HIPAA. The fact sheet states that when electronic protected health information is encrypted by ransomware, a breach has occurred, and the attack therefore constitutes a disclosure that is not permitted under HIPAA, the rationale being that an adversary has taken control of the information. Sensitive data might never leave the victim organization, but the break-in may have allowed data to be sent out undetected. California enacted a law that defines the introduction of ransomware into a computer system with the intent of extortion as being against the law. == Examples == === Tremor virus === While viruses in the wild have used cryptography in the past, the only purpose of such usage of cryptography was to avoid detection by antivirus software. For example, the tremor virus used polymorphism as a defensive technique in an attempt to avoid detection by anti-virus software. Though cryptography does assist in such cases to enhance the longevity of a virus, the capabilities of cryptography are not used in the payload. The One-half virus was amongst the first viruses known to have encrypted affected files. === Tro_Ransom.A virus === An example of a virus that informs the owner of the infected machine to pay a ransom is the virus nicknamed Tro_Ransom.A. This virus asks the owner of the infected machine to send $10.99 to a given account through Western Union. Virus.Win32.Gpcode.ag is a classic cryptovirus. This virus partially uses a version of 660-bit RSA and encrypts files with many different extensions. It instructs the owner of the machine to email a given mail ID if the owner desires the decryptor. If contacted by email, the user will be asked to pay a certain amount as ransom in return for the decryptor. === CAPI === It has been demonstrated that using just 8 different calls to Microsoft's Cryptographic API (CAPI), a cryptovirus can satisfy all its encryption needs. == Other uses of cryptography-enabled malware == Apart from cryptoviral extortion, there are other potential uses of cryptoviruses, such as deniable password snatching, cryptocounters, private information retrieval, and in secure communication between different instances of a distributed cryptovirus.

  Read more →
• 

  NRENum.net

  The NRENum.net service is an end-user ENUM service run by TERENA and the participating national research and education networking organisations (NRENs), primarily for academia. NRENum.net is considered as a complementary service and a valid alternative to the Golden ENUM tree. The domain nrenum.net is being populated in order to provide the infrastructure in DNS for storage of E.164 numbers. The NRENum.net service includes the operation of the Tier-0 root Domain Name Server(s) and the delegation of county codes to NRENum.net Registries. NRENum.net is a registered community trademark of TERENA. == Service description == E.164 Telephone Number Mapping (ENUM) is a standard protocol that is the result of work of the Internet Engineering Task Force's Telephone Number Mapping working group. ENUM translates a telephone number into a domain name. This allows users to continue to use the existing phone number formats they are familiar with, while allowing the call to be routed using DNS. This makes ENUM a quick, stable and cheap link between telecommunications systems and the Internet. RFC 3761 discusses the use of the Domain Name System for storage of E.164 numbers. More specifically, how DNS can be used for identifying available services connected to one E.164 number. The RIPE NCC provides DNS operations for e164.arpa (known as Golden ENUM tree) in accordance with the instructions from the Internet Architecture Board. The NRENum.net service is an end-user ENUM service run by TERENA and the participating NRENs primarily for academia. NRENum.net is considered as a complementary service and a valid alternative to the Golden ENUM tree. The domain nrenum.net is being populated in order to provide the infrastructure in DNS for storage of E.164 numbers. The NRENum.net service includes the operation of the Tier-0 root Domain Name Servers and the delegation of county codes to NRENum.net Registries. NRENum.net is a registered community trademark of TERENA. NRENum.net facilitates services such as Voice over IP and videoconferencing. NRENum.net tree refers to the tree structure where: Tier-0 root Domain Name Servers (technically one master and several secondary servers ensuring resilience) are run by the hosting organisations and coordinated by the NRENum.net Operations Team. Tier-1 Domain Name Servers are run by the NRENum.net (national or regional) Registries responsible for the country code(s) delegated. Tier-2 and lower DNS sub-delegations may be implemented, regulated by the national service policies. An NRENum.net Registry is an entity that is authorised by the NRENum.net Operations Team to operate the national or regional Tier-1 Domain Name Server and be responsible for the county code(s) delegated. In many countries there is a National Research and Education Networking organisation (NREN) that acts as the Registry of the country. An NRENum.net Registrar is responsible for the number/block registration in the Tier-1 DNS and a Number Validation Entity is responsible for the validation of the E.164 telephone numbers to be registered. The NREN may at the same time have the role of the NRENum.net Registry, Registrar and Validation Entity for the country code(s) delegated. A Registrant (end user) is an E.164 telephone number holder. Holders of E.164 numbers who want to be listed in the service must contact the appropriate NRENum.net Registrar. Number (block) delegation is the technical process of assigning country codes to national registries, or number blocks under country codes to end users. Number (block) registration is the technical process of configuring DNS and populating it with the appropriate ENUM records (i.e., adding NAPTR records to DNS) via registrars. The ITU-T strictly regulates the number structure of valid E.164 telephone numbers and assigns number blocks to national authorities (telecom regulators) or recently to global entities directly. The national authorities can further delegate the number ranges to local operators within the country or region. A virtual number has either a non-valid E.164 number structure (e.g., longer than 15 digits) or has a valid structure but is not assigned to any national authorities or operators. The number Validation Entity is responsible for checking the numbers to be registered to NRENum.net. == History == The idea for the NRENum.net service was conceived in 2006. NRENum.net became operational in August 2006, and was run by Bernie Höneisen, a staff member of SWITCH, and Kewin Stöckigt, a staff member of AARNet, as a private service, with technical support from SWITCH and the participants in the TERENA Task Force on Enhanced Communication Services (TF-ECS). When that task force completed its activities in 2008, TERENA agreed to take over the coordination of the NRENum.net service. By that time, nine NRENs had joined NRENum.net. The service continued to grow during the next years, and in March 2012 NRENum.net went global when RNP from Brazil joined the service as its 14th partificpant and the first outside Europe. In 2011, the participants decided to migrate the operation of the service's master Domain Name Server to NIIF and the operation of the two secondary DNSs to CARNET and SWITCH. In 2013, Internet2, AARNet and NORDUnet set up additional secondary Domain Name Servers for their regions, thereby completing the global distribution of DNS slaves and bringing the resilience of the NRENum.net infrastructure to a high level. == Governance == TERENA has established a lightweight global governance structure. The Global NRENum.net Governance Committee (GNGC) is the highest-level strategic body responsible for overall NRENum.net service definition, sustainability and long-term strategy. This includes formulating and recommending service governance principles and policies. Its members are nominated by the NRENum.net Registries in the various world regions, and are appointed by TERENA. The GNGC is composed of two members representing Europe, two representing the Asia-Pacific region, and two representing the Americas. The NRENum.net Operations Team is responsible for the day-to-day operations of the Tier-0 root DNSs and the handling of country code delegation requests. It may escalate technical or policy issues to the GNGC for discussion. TERENA is responsible for ensuring the correct and secure operations of the NRENum.net service performed by the NRENum.net Operations Team and governance by the GNGC. TERENA also supports the development of technical improvements to the NRENum.net service and promotes the deployment of NRENum.net worldwide. == Geographical deployment == Thirty-two county codes are delegated in the NRENum.net service. Below these are listed per world region. === Europe === === Asia-Pacific === === North America === +1 United States (Internet2) === Latin America === === Caribbean === === Africa === +262 Réunion, Mayotte (RENATER)

  Read more →
• 

  Data

  Data ( DAY-tə, US also DAT-ə, India: DEE-tə) is a collection of discrete or continuous values that conveys information, describing the quantity, quality, fact, statistics, other basic units of meaning, or simply sequences of symbols that may be further interpreted formally. A data point or datum is an individual value in a collection of data. Data is usually organized into structures such as tables that provide additional context and meaning, and may itself be used as data in larger structures. Data may be used as variables in a computational process. Data may represent abstract ideas or concrete measurements. Data is commonly used in scientific research, economics, and virtually every other form of human organizational activity. Examples of data sets include price indices (such as the consumer price index), unemployment rates, literacy rates, and census data. In this context, data represents the raw facts and figures from which useful information can be extracted. Data is collected using techniques such as measurement, observation, query, or analysis, and is typically represented as numbers or characters that may be further processed. Field data is data that is collected in an uncontrolled, in-situ environment. Experimental data is data that is generated in the course of a controlled scientific experiment. Data is analyzed using techniques such as calculation, reasoning, discussion, presentation, visualization, or other forms of post-analysis. Prior to analysis, raw data (or unprocessed data) is typically cleaned: Outliers are removed, and obvious instrument or data entry errors are corrected. Data can be seen as the smallest unit of factual information that can be used as a basis for calculation, reasoning, or discussion. Data can range from abstract ideas to concrete measurements, including, but not limited to, statistics. Thematically connected data presented in some relevant context can be viewed as information. Contextually connected pieces of information can then be described as data insights or intelligence. The stock of insights and intelligence that accumulate over time, resulting from the synthesis of data into information, can then be described as knowledge. Data has been described as "the new oil of the digital economy". Data, as a general concept, refers to the fact that some existing information or knowledge is represented or coded in some form suitable for better usage or processing. Advances in computing technologies have led to the advent of big data, which generally refers to very large quantities of data, typically at the petabyte scale. If restricted to traditional data analysis methods and computing, working with such large (and growing) datasets is difficult, even impossible. In response, the relatively new field of data science uses machine learning (and other artificial intelligence) methods that allow for efficient applications of analytic methods to big data. == Etymology and terminology == The Latin word data is the plural of datum, "(thing) given," and the neuter past participle of dare, "to give". The first English use of the word "data" is from the 1640s. The word "data" was first used to mean "transmissible and storable computer information" in 1946. The expression "data processing" was first used in 1954. When "data" is used more generally as a synonym for "information", it is treated as a mass noun in singular form. This usage is common in everyday language and in technical and scientific fields such as software development and computer science. One example of this usage is the term "big data". When used more specifically to refer to the processing and analysis of sets of data, the term retains its plural form. This usage is common in the natural sciences, life sciences, social sciences, software development and computer science, and grew in popularity in the 20th and 21st centuries. Some style guides do not recognize the different meanings of the term and simply recommend the form that best suits the target audience of the guide. For example, APA style as of the 7th edition requires "data" to be treated as a plural form. == Meaning == Data, information, knowledge, and wisdom are closely related concepts, but each has its role concerning the other, and each term has its meaning. According to a common view, data is collected and analyzed; data only becomes information suitable for making decisions once it has been analyzed in some fashion. One can say that the extent to which a set of data is informative to someone depends on the extent to which it is unexpected by that person. The amount of information contained in a data stream may be characterized by its Shannon entropy. Knowledge is the awareness of its environment that some entity possesses, whereas data merely communicates that knowledge. For example, the entry in a database specifying the height of Mount Everest is a datum that communicates a precisely measured value. This measurement may be included in a book along with other data on Mount Everest to describe the mountain in a manner useful for those who wish to decide on the best method to climb it. Awareness of the characteristics represented by this data is knowledge. Data are often assumed to be the least abstract concept, information the next least, and knowledge the most abstract. In this view, data becomes information by interpretation; e.g., the height of Mount Everest is generally considered "data", a book on Mount Everest geological characteristics may be considered "information", and a climber's guidebook containing practical information on the best way to reach Mount Everest's peak may be considered "knowledge". "Information" bears a diversity of meanings that range from everyday usage to technical use. This view, however, has also been argued to reverse how data emerges from information, and information from knowledge. Generally speaking, the concept of information is closely related to notions of constraint, communication, control, data, form, instruction, knowledge, meaning, mental stimulus, pattern, perception, and representation. Beynon-Davies uses the concept of a sign to differentiate between data and information; data is a series of symbols, while information occurs when the symbols are used to refer to something. Before the development of computing devices and machines, people had to manually collect data and impose patterns on it. With the development of computing devices and machines, these devices can also collect data. In the 2010s, computers were widely used in many fields to collect data and sort or process it, in disciplines ranging from marketing, analysis of social service usage by citizens to scientific research. These patterns in the data are seen as information that can be used to enhance knowledge. These patterns may be interpreted as "truth" (though "truth" can be a subjective concept) and may be authorized as aesthetic and ethical criteria in some disciplines or cultures. Events that leave behind perceivable physical or virtual remains can be traced back through data. Marks are no longer considered data once the link between the mark and observation is broken. Mechanical computing devices are classified according to how they represent data. An analog computer represents a datum as a voltage, distance, position, or other physical quantity. A digital computer represents a piece of data as a sequence of symbols drawn from a fixed alphabet. The most common digital computers use a binary alphabet, that is, an alphabet of two characters typically denoted "0" and "1". More familiar representations, such as numbers or letters, are then constructed from the binary alphabet. Some special forms of data are distinguished. A computer program is a collection of data, that can be interpreted as instructions. Most computer languages make a distinction between programs and the other data on which programs operate, but in some languages, notably Lisp and similar languages, programs are essentially indistinguishable from other data. It is also useful to distinguish metadata, that is, a description of other data. A similar yet earlier term for metadata is "ancillary data." The prototypical example of metadata is the library catalog, which is a description of the contents of books. == Data sources == With respect to ownership of data collected in the course of marketing or other corporate collection, data has been characterized according to party depending on how close the data is to the source or if it has been generated through additional processing. "Zero-party data" refers to data that customers "intentionally and proactively shares". This kind of data can come from a variety of sources, including: subscriptions, preference centers, quizzes, surveys, pop-up forms, and interactive digital experiences. "First-party data" may be collected by a company directly from its customers. The secure exchange of first-party data among companies can be done using data clean rooms. "S

  Read more →
• 

  Residual neural network

  A residual neural network (also referred to as a residual network or ResNet) is a deep learning architecture in which the layers learn residual functions with reference to the layer inputs. It was developed in 2015 for image recognition, and won the ImageNet Large Scale Visual Recognition Challenge (ILSVRC) of that year. As a point of terminology, "residual connection" refers to the specific architectural motif of x ↦ f ( x ) + x {\displaystyle x\mapsto f(x)+x} , where f {\displaystyle f} is an arbitrary neural network module. The motif had been used previously (see §History for details). However, the publication of ResNet made it widely popular for feedforward networks, appearing in neural networks that are seemingly unrelated to ResNet. The residual connection stabilizes the training and convergence of deep neural networks with hundreds of layers, and is a common motif in deep neural networks, such as transformer models (e.g., BERT, and GPT models such as ChatGPT), the AlphaGo Zero system, the AlphaStar system, and the AlphaFold system. == Mathematics == === Residual connection === In a multilayer neural network model, consider a (non-residual) subnetwork with a certain number of stacked layers (e.g., 2 or 3). Let H ( x ; α ) {\displaystyle H(x;\alpha )} denote the subnetwork. Suppose H ∗ {\displaystyle H^{}} is the desired optimal output of this subnetwork. Residual learning simply adds x {\displaystyle x} directly to the output, such that the optimal learned output now becomes be H ∗ − x {\displaystyle H^{}-x} , which is interpreted as a "residual" with respect to x {\displaystyle x} . The operation of "adding x {\displaystyle x} " is implemented via a "skip connection" that performs an identity mapping to connect the input of the subnetwork with its output. This connection is referred to as a "residual connection" in later work. Let F ( x ; α ) = H ( x ; a ) + x {\displaystyle F(x;\alpha )=H(x;a)+x} . The function F {\displaystyle F} is often represented by matrix multiplication interlaced with activation functions and normalization operations (e.g., batch normalization or layer normalization). As a whole, one of these subnetworks is referred to as a "residual block". A deep residual network is constructed by simply stacking these blocks. Long short-term memory (LSTM) has a memory mechanism that serves as a residual connection. In an LSTM without a forget gate, an input x t {\displaystyle x_{t}} is processed by a function F {\displaystyle F} and added to a memory cell c t {\displaystyle c_{t}} , resulting in c t + 1 = c t + F ( x t ) {\displaystyle c_{t+1}=c_{t}+F(x_{t})} . An LSTM with a forget gate essentially functions as a highway network. To stabilize the variance of the layers' inputs, it is recommended to replace the residual connections x + f ( x ) {\displaystyle x+f(x)} with x / L + f ( x ) {\displaystyle x/L+f(x)} , where L {\displaystyle L} is the total number of residual layers. === Projection connection === If the function F {\displaystyle F} is of type F : R n → R m {\displaystyle F:\mathbb {R} ^{n}\to \mathbb {R} ^{m}} where n ≠ m {\displaystyle n\neq m} , then F ( x ) + x {\displaystyle F(x)+x} is undefined. To handle this special case, a projection connection is used: y = F ( x ) + P ( x ) {\displaystyle y=F(x)+P(x)} where P {\displaystyle P} is typically a linear projection, defined by P ( x ) = M x {\displaystyle P(x)=Mx} where M {\displaystyle M} is a m × n {\displaystyle m\times n} matrix. The matrix is trained via backpropagation, as is any other parameter of the model. === Signal propagation === The introduction of identity mappings facilitates signal propagation in both forward and backward paths. ==== Forward propagation ==== If the output of the ℓ {\displaystyle \ell } -th residual block is the input to the ( ℓ + 1 ) {\displaystyle (\ell +1)} -th residual block (assuming no activation function between blocks), then the ( ℓ + 1 ) {\displaystyle (\ell +1)} -th input is: x ℓ + 1 = F ( x ℓ ) + x ℓ {\displaystyle x_{\ell +1}=F(x_{\ell })+x_{\ell }} Applying this formulation recursively, e.g.: x ℓ + 2 = F ( x ℓ + 1 ) + x ℓ + 1 = F ( x ℓ + 1 ) + F ( x ℓ ) + x ℓ {\displaystyle {\begin{aligned}x_{\ell +2}&=F(x_{\ell +1})+x_{\ell +1}\\&=F(x_{\ell +1})+F(x_{\ell })+x_{\ell }\end{aligned}}} yields the general relationship: x L = x ℓ + ∑ i = ℓ L − 1 F ( x i ) {\displaystyle x_{L}=x_{\ell }+\sum _{i=\ell }^{L-1}F(x_{i})} where L {\textstyle L} is the index of a residual block and ℓ {\textstyle \ell } is the index of some earlier block. This formulation suggests that there is always a signal that is directly sent from a shallower block ℓ {\textstyle \ell } to a deeper block L {\textstyle L} . ==== Backward propagation ==== The residual learning formulation provides the added benefit of mitigating the vanishing gradient problem to some extent. However, it is crucial to acknowledge that the vanishing gradient issue is not the root cause of the degradation problem, which is tackled through the use of normalization. To observe the effect of residual blocks on backpropagation, consider the partial derivative of a loss function E {\displaystyle {\mathcal {E}}} with respect to some residual block input x ℓ {\displaystyle x_{\ell }} . Using the equation above from forward propagation for a later residual block L > ℓ {\displaystyle L>\ell } : ∂ E ∂ x ℓ = ∂ E ∂ x L ∂ x L ∂ x ℓ = ∂ E ∂ x L ( 1 + ∂ ∂ x ℓ ∑ i = ℓ L − 1 F ( x i ) ) = ∂ E ∂ x L + ∂ E ∂ x L ∂ ∂ x ℓ ∑ i = ℓ L − 1 F ( x i ) {\displaystyle {\begin{aligned}{\frac {\partial {\mathcal {E}}}{\partial x_{\ell }}}&={\frac {\partial {\mathcal {E}}}{\partial x_{L}}}{\frac {\partial x_{L}}{\partial x_{\ell }}}\\&={\frac {\partial {\mathcal {E}}}{\partial x_{L}}}\left(1+{\frac {\partial }{\partial x_{\ell }}}\sum _{i=\ell }^{L-1}F(x_{i})\right)\\&={\frac {\partial {\mathcal {E}}}{\partial x_{L}}}+{\frac {\partial {\mathcal {E}}}{\partial x_{L}}}{\frac {\partial }{\partial x_{\ell }}}\sum _{i=\ell }^{L-1}F(x_{i})\end{aligned}}} This formulation suggests that the gradient computation of a shallower layer, ∂ E ∂ x ℓ {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{\ell }}}} , always has a later term ∂ E ∂ x L {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{L}}}} that is directly added. Even if the gradients of the F ( x i ) {\displaystyle F(x_{i})} terms are small, the total gradient ∂ E ∂ x ℓ {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{\ell }}}} resists vanishing due to the added term ∂ E ∂ x L {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{L}}}} . == Variants of residual blocks == === Basic block === A basic block is the simplest building block studied in the original ResNet. This block consists of two sequential 3x3 convolutional layers and a residual connection. The input and output dimensions of both layers are equal. === Bottleneck block === A bottleneck block consists of three sequential convolutional layers and a residual connection. The first layer in this block is a 1×1 convolution for dimension reduction (e.g., to 1/2 of the input dimension); the second layer performs a 3×3 convolution; the last layer is another 1×1 convolution for dimension restoration. The models of ResNet-50, ResNet-101, and ResNet-152 are all based on bottleneck blocks. === Pre-activation block === The pre-activation residual block applies activation functions before applying the residual function F {\displaystyle F} . Formally, the computation of a pre-activation residual block can be written as: x ℓ + 1 = F ( ϕ ( x ℓ ) ) + x ℓ {\displaystyle x_{\ell +1}=F(\phi (x_{\ell }))+x_{\ell }} where ϕ {\displaystyle \phi } can be any activation (e.g. ReLU) or normalization (e.g. LayerNorm) operation. This design reduces the number of non-identity mappings between residual blocks, and allows an identity mapping directly from the input to the output. This design was used to train models with 200 to over 1000 layers, and was found to consistently outperform variants where the residual path is not an identity function. The pre-activation ResNet with 200 layers took 3 weeks to train for ImageNet on 8 GPUs in 2016. Since GPT-2, transformer blocks have been mostly implemented as pre-activation blocks. This is often referred to as "pre-normalization" in the literature of transformer models. == Applications == Originally, ResNet was designed for computer vision. All transformer architectures include residual connections. Indeed, very deep transformers cannot be trained without them. The original ResNet paper made no claim on being inspired by biological systems. However, later research has related ResNet to biologically-plausible algorithms. A study published in Science in 2023 disclosed the complete connectome of an insect brain (specifically that of a fruit fly larva). This study discovered "multilayer shortcuts" that resemble the skip connections in artificial neural networks, including ResNets. == History == === Previous work === Residual connections were noticed in neu

  Read more →
• 

  Protecting Kids From Social Media Act

  Protecting Kids on Social Media Act or HB 1891 is an American law that was introduced by William Lamberth of Sumner County, Tennessee and was signed into law by Tennessee's governor on May 2, 2024. The bill requires social media websites such as X, YouTube, TikTok, Facebook and others to verify the age of users and if those users are under 18, they must have parental consent. == Progress == The law passed the Tennessee State Legislature with little opposition: the bill had only two no votes in the House from Aftyn Behn and Vincent B. Dixie, and it had zero no votes in the Senate. == Bill summary == Every social media company must verify the age of new users after the law takes effect, and if the user had created an account before the law took effect, they must verify the age of the person attempting to access the account within 14 days. If the new user or the user who originally owned an account is under 18 years of age, they must get parental consent and the third party or social media company must not retain the data from the age verification process or obtaining parental consent. Parents who are account holders of those under 18 can view the privacy settings, set daily time restrictions, and implement breaks during which the minor cannot access the account. The law is enforced by the Attorney General of Tennessee and went into effect on January 1, 2025. == Lawsuit == On October 3, 2024, the trade association NetChoice filed a lawsuit against Tennessee Attorney General Jonathan Skrmetti in the Middle District Court of Tennessee, claiming that the law violates the First Amendment. The Judge for the case is William L. Campbell Jr. An initial case management conference was originally scheduled for December 4, 2024, however it was delayed because of the Supreme Court case United States v. Skrmetti, recommending that the conference be delayed after January 20, 2025. On February 14, 2025, Judge Eli Richardson denied NetChoice's motion for a temporary restraining order because it would disrupt the status quo of the case.

  Read more →
• 

  Snake oil (cryptography)

  In cryptography, snake oil is any cryptographic method or product considered to be bogus or fraudulent. The name derives from snake oil, one type of patent medicine widely available in the 19th century United States. Distinguishing secure cryptography from insecure cryptography can be difficult from the viewpoint of a user. Many cryptographers, such as Bruce Schneier and Phil Zimmermann, undertake to educate the public in how secure cryptography is done, as well as highlighting the misleading marketing of some cryptographic products. The Snake Oil FAQ describes itself as "a compilation of common habits of snake oil vendors. It cannot be the sole method of rating a security product, since there can be exceptions to most of these rules. [...] But if you're looking at something that exhibits several warning signs, you're probably dealing with snake oil." == Some examples of snake oil cryptography techniques == This is not an exhaustive list of snake oil signs. A more thorough list is given in the references. Secret system Some encryption systems will claim to rely on a secret algorithm, technique, or device; this is categorized as security through obscurity. Criticisms of this are twofold. First, a 19th-century rule known as Kerckhoffs's principle, later formulated as Shannon's maxim, teaches that "the enemy knows the system" and the secrecy of a cryptosystem algorithm does not provide any advantage. Second, secret methods are not open to public peer review and cryptanalysis, so potential mistakes and insecurities can go unnoticed. Technobabble Snake oil salespeople may use "technobabble" to sell their product since cryptography is a complicated subject. "Unbreakable" Claims of a system or cryptographic method being "unbreakable" are always false (or true under some limited set of conditions), and are generally considered a sure sign of snake oil. "Military grade" There is no accepted standard or criterion for "military grade" ciphers. One-time pads One-time pads are a popular cryptographic method to invoke in advertising, because it is well known that one-time pads, when implemented correctly, are genuinely unbreakable. The problem comes in implementing one-time pads, which is rarely done correctly. Cryptographic systems that claim to be based on one-time pads are considered suspect, particularly if they do not describe how the one-time pad is implemented, or they describe a flawed implementation. Unsubstantiated "bit" claims Cryptographic products are often accompanied with claims of using a high number of bits for encryption, apparently referring to the key length used. However key lengths are not directly comparable between symmetric and asymmetric systems. Furthermore, the details of implementation can render the system vulnerable. For example, in 2008 it was revealed that a number of hard drives sold with built-in "128-bit AES encryption" were actually using a simple and easily defeated "XOR" scheme. AES was only used to store the key, which was easy to recover without breaking AES.

  Read more →
• 

  Kurzsignale

  The Short Signal Code, also known as the Short Signal Book (German: Kurzsignalbuch), was a short code system used by the Kriegsmarine (German Navy) during World War II to minimize the transmission duration of messages. == Description == The transmission of radio messages had the potential risks of revealing the submarine's presence and direction; if decoded the content was also revealed. Submarines need to provide information, mostly in standard form (position of convoy to attack and of submarine, weather information), to their bases. Initially Morse code transmissions could be used. To inhibit detection, the duration of messages needed to be minimised; for this, Kurzsignale short-coding was used. To prevent interception, messages needed to be encrypted by the Enigma machine. To shorten transmission even further, the message could be sent by a fast machine instead of a human radio operator. For example, the Kurier system – not implemented in time – decreased the time to send a Morse dot from around 50 milliseconds for a human to 1 millisecond. == Short Signal book == The Kurzsignale code was intended to shorten transmission time to below the time required to get a directional fix. It was not primarily intended to hide signal contents; protection was intended to be achieved by encoding with the Enigma machine. A copy of the Kurzsignale code book was captured from German submarine U-110 on 9 May 1941. In August 1941, Dönitz began addressing U-boats by the names of their commanders, instead of boat numbers. The method of defining U-boat meeting points in the Short Signal Book was regarded as compromised, so a method was defined by B-Dienst cryptanalysts to disguise their positions on the Kriegsmarine German Naval Grid System (German:Gradnetzmeldeverfahren) was introduced and used until the end of the war == Radio direction finding == Aware of the danger presented by radio direction finding (RDF), the Kriegsmarine developed various systems to speed up broadcast. The Kurzsignale code system condensed messages into short codes consisting of short sequences for common terms such as "convoy location" so that additional descriptions would not be needed in the message. The resulting Kurzsignal was then encoded with the Enigma machine and subsequently transmitted as rapidly as possible, typically taking about 20 seconds. Typical length of an information or weather signal was about 25 characters. Conventional RDF needed about a minute to fix the bearing of a radio signal, and the Kurzsignale protected against this. However, the huff-duff system which was in use by the Allies could cope with these short transmissions. The fully automated burst transmission Kurier system, in testing from August 1944, could send a Kurzsignal in not more than 460 milliseconds; this was short enough to prevent location even by huff-duff and, if deployed, would have been a serious setback for Allied anti-submarine and code-breaking activities. By late 1944 the Kurier program was a top priority, but the war ended before the system was operational. == Short Weather cipher == A similar coding system was used for weather reports from U-boats, the Wetterkurzschlüssel (Short Weather Cipher). Code books were captured from U-559 on 30 October 1942.

  Read more →
• 

  Wavelet noise

  Wavelet noise is an alternative to Perlin noise which reduces the problems of aliasing and detail loss that are encountered when Perlin noise is summed into a fractal. == Algorithm detail == The basic algorithm for 2-dimensional wavelet noise is as follows: Create an image, R {\displaystyle R} , filled with uniform white noise. Downsample R {\displaystyle R} to half-size to create R ↓ {\displaystyle R^{\downarrow }} , then upsample it back up to full size to create R ↓↑ {\displaystyle R^{\downarrow \uparrow }} . Subtract R ↓↑ {\displaystyle R^{\downarrow \uparrow }} from R {\displaystyle R} to create the end result, N {\displaystyle N} . This results in an image that contains all the information that cannot be represented at half-scale. From here, N {\displaystyle N} can be used similarly to Perlin noise to create fractal patterns.

  Read more →
• 

  Social business model

  The social business model is use of social media tools and social networking behavioral standards by businesses for communication with customers, suppliers, and others. Combining social networking etiquette (being helpful, transparent and authentic) with business engagement on LinkedIn (for one-to-one interaction), Twitter (for immediacy) and Facebook (for content sharing) more fully involves employees in the organization and increases customer intimacy and trust. == Overview == Traditional business models, particularly in large organizations, have had as one common characteristic careful limitation of direct contact between those within the organization and those outside of it. Only certain specific individuals (most frequently in roles such as sales, customer service and field consulting) were designated as "customer-facing" personnel. Organizations further limited outside access to internal employees through filtering mechanisms such as publishing only a main switchboard number (whether routed through a live receptionist or an interactive voice response system) and generic "sales@" or "info@" email addresses. The Cluetrain Manifesto (written by Rick Levine, Christopher Locke, Doc Searls, and David Weinberger and published in 1999) was among the first books to predict the demise of this old order and the emergence of more open business models, though most of the business world was slow to adopt the book's recommended cultural changes. Thirteen years later, authors Dion Hinchcliffe and Peter Kim added structural underpinnings to the cultural shifts outlined in The Cluetrain Manifesto in their book, Social Business by Design. The book details many of the ways social media tools and practices are being adopted within organizations, to support both internal employee collaboration and external customer engagement (which the authors describe as the "bigger problem"). == Elements == In implementing the social business model, organizations apply social networking protocols and tools in a range of areas, potentially including: Marketing Customer Support Recruiting Crowdsourcing Internal employee collaboration Sales Product Development Supply Chain Operations Investor Relations == Characteristics of organizations adopting the social business model == Organizations that fully adopt the social business model will exhibit four key characteristics: Connected – employees will be able to seamlessly engage one-on-one in real-time with other employees and individuals outside the organization (customers, prospects, partners, media, etc.) using a variety of communications methods including text chat, voice, file sharing, email, and video chat. Social – employees will follow social networking etiquette (being authentic, helpful and transparent) in external interactions. The focus will be on answering questions and providing information rather than overt sales or promotion. Presence – these conversations may originate on the company's website or elsewhere online (e.g., publication websites, industry portals, or social networking sites such as LinkedIn or Facebook). Intelligent – organizations will use in-depth analytics to monitor connections, social interactions and presence; measure corresponding business results; and continually adjust and improve practices for increased effectiveness. == Technical and functional requirements == While much of the change inherent in adopting the social business model is cultural, it also requires process changes enabled by social business technology. Functional requirements for a social business technology platform include: Analytics (including the cost of engagement as well as various measures of return on investment such as leads, sales, referrals, recommendations, and retained customers). Integration with other social media and business tools such as CRM systems, partner relationship management (PRM) software, product development, website analytics, and employee-recruiting applications. Rules-based workflow (e.g. routing a comment to the appropriate individual for a response, based on content). Geolocation (so customers or prospects can be automatically routed to local sales or customer service representatives). Content sharing. Collaboration tools. Transparency (i.e., people should know who they are engaging with) Unified communications (the ability to engage via voice, text, video, email, and share a wide variety of file types) Storage (the ability to store interactions for legal, training, compliance or compensation purposes, and purge stored data when no longer needed based on company policy or regulatory requirements). Immediacy (real-time monitoring and response).

  Read more →
• 

  Utah Social Media Regulation Act

  S.B. 152 and H.B. 311, collectively known as the Utah Social Media Regulation Act, were social media regulation bills that were passed by the Utah State Legislature in March 2023. The bills would have collectively imposed restrictions on how social networking services serve minors in the state of Utah, including mandatory age verification and age restrictions, as well as restrictions on data collection and on algorithmic recommendations. The Act was intended to take effect in March 2024. However, following a lawsuit over the Act by NetChoice, a tech industry lobby group, the Utah attorney general stated in January 2024 that its implementation had been delayed to October 2024, but was likely to be repealed and amended. On September 10, 2024 Chief Judge Robert J. Shelby issued a written order granting a request from NetChoice for a preliminary injunction, meaning that Utah will be unable to enforce its social media law as litigation plays out. The law was appealed to the 10th Circuit on October 11, 2024 and is awaiting a decision. == Provisions == The Act comprises two bills, S.B. 152 and H.B. 311, which respectively regulate access to social network accounts registered to minors, and impose obligations on social networking services to follow design practices that protect the privacy of minors. The bills would apply to social networks with more than 5 million active users in the United States. Social networking services would've verified the age of all users in the state of Utah, or else their account must've been deleted. The Act does not specify a specific method of age verification. Users who are under 18 must have consent from a parent or guardian to open an account, and the parent must be able to have access to the account and its data for monitoring. Unless required to comply with state or federal law, social networks were prohibited from collecting data based on the activity of minors, and may've not displayed targeted advertising or algorithmic recommendations of content, users, or groups to minors. A social network must not allow minors to access the service between the hours of 10:30 p.m., and 6:30 a.m. without parental consent. H.B. 311 prohibits social networks from exposing features to minors that cause them to have an "addiction" to the platform; the service must perform quarterly audits, and may be sued by users for harms caused by providing "addictive" features; there is a rebuttable presumption of harm if the plaintiff is 16 or younger. The bills prescribed fines of $2,500 per-violation for violations of the provisions of S.B. 152, and up to $250,000 in liabilities (plus fines of $2,500 per-user) for violations of the addiction rules. == History == The two bills were passed in early-March 2023, and signed by Governor Spencer Cox on March 23, 2023. Cox cited studies linking social media addiction to increases in depression and suicide among youth. They were originally intended to take effect on March 1, 2024. In the wake of a lawsuit in Arkansas by the trade association NetChoice over a similar bill, state senator and bill author Mike McKell stated that he planned to introduce amendments when the legislature resumed in 2024. In December 2023, NetChoice filed a lawsuit in Utah seeking to block the Act, citing that its definition of a social network was too vague, and that it "restricts who can express themselves, what can be said, and when and how speech on covered websites can occur, down to the very hours of the day minors can use covered websites. The First Amendment, reinforced by decades of precedent, allows none of this." In regards to its age verification requirements, NetChoice argued that "it may not be enough to simply verify the age of whatever person may be listed on a form of identification (even if they have such a record) because that record may not accurately reflect who the individual actually is." The office of the attorney general stated that the state was "reviewing the lawsuit but remains intently focused on the goal of this legislation: Protecting young people from negative and harmful effects of social media use." In January 2024, Attorney General Sean Reyes asked the court to delay a hearing over the bill, stating that its effective date had been delayed to October 2024, and that the legislature planned to repeal and replace the bills. On September 10, 2024, Federal Chief Judge Robert Shelby granted a preliminary injunction to stop enforcement of the law as litigation continues. The law was later appealed on October 11, 2024, by the state of Utah and had a court hearing on the appeal on November 20, 2025.

  Read more →