AI Analysis X Ray

AI Analysis X Ray — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Structured-light 3D scanner

  A structured-light 3D scanner is a device used to capture the three-dimensional shape of an object by projecting light patterns, such as grids or stripes, onto its surface. The deformation of these patterns is recorded by cameras and processed using specialized algorithms to generate a detailed 3D model. Structured-light 3D scanning is widely employed in fields such as industrial design, quality control, cultural heritage preservation, augmented reality gaming, and medical imaging. Compared to laser-based 3D scanning, structured-light scanners use non-coherent light sources, such as LEDs or projectors, which enable faster data acquisition and eliminate potential safety concerns associated with lasers. However, the accuracy of structured-light scanning can be influenced by external factors, including ambient lighting conditions and the reflective properties of the scanned object. == Principle == Projecting a narrow band of light onto a three-dimensional surface creates a line of illumination that appears distorted when viewed from perspectives other than that of the projector. This distortion can be analyzed to reconstruct the geometry of the surface, a technique known as light sectioning. Projecting patterns composed of multiple stripes or arbitrary fringes simultaneously enables the acquisition of numerous data points at once, improving scanning speed. While various structured light projection techniques exist, parallel stripe patterns are among the most commonly used. By analyzing the displacement of these stripes, the three-dimensional coordinates of surface details can be accurately determined. === Generation of light patterns === Two major methods of stripe pattern generation have been established: Laser interference and projection. The laser interference method works with two wide planar laser beam fronts. Their interference results in regular, equidistant line patterns. Different pattern sizes can be obtained by changing the angle between these beams. The method allows for the exact and easy generation of very fine patterns with unlimited depth of field. Disadvantages are high cost of implementation, difficulties providing the ideal beam geometry, and laser typical effects like speckle noise and the possible self interference with beam parts reflected from objects. Typically, there is no means of modulating individual stripes, such as with Gray codes. The projection method uses incoherent light and basically works like a video projector. Patterns are usually generated by passing light through a digital spatial light modulator, typically based on one of the three currently most widespread digital projection technologies, transmissive liquid crystal, reflective liquid crystal on silicon (LCOS) or digital light processing (DLP; moving micro mirror) modulators, which have various comparative advantages and disadvantages for this application. Other methods of projection could be and have been used, however. Patterns generated by digital display projectors have small discontinuities due to the pixel boundaries in the displays. Sufficiently small boundaries however can practically be neglected as they are evened out by the slightest defocus. A typical measuring assembly consists of one projector and at least one camera. For many applications, two cameras on opposite sides of the projector have been established as useful. Invisible (or imperceptible) structured light uses structured light without interfering with other computer vision tasks for which the projected pattern will be confusing. Example methods include the use of infrared light or of extremely high framerates alternating between two exact opposite patterns. === Calibration === Geometric distortions by optics and perspective must be compensated by a calibration of the measuring equipment, using special calibration patterns and surfaces. A mathematical model is used for describing the imaging properties of projector and cameras. Essentially based on the simple geometric properties of a pinhole camera, the model also has to take into account the geometric distortions and optical aberration of projector and camera lenses. The parameters of the camera as well as its orientation in space can be determined by a series of calibration measurements, using photogrammetric bundle adjustment. === Analysis of stripe patterns === There are several depth cues contained in the observed stripe patterns. The displacement of any single stripe can directly be converted into 3D coordinates. For this purpose, the individual stripe has to be identified, which can for example be accomplished by tracing or counting stripes (pattern recognition method). Another common method projects alternating stripe patterns, resulting in binary Gray code sequences identifying the number of each individual stripe hitting the object. An important depth cue also results from the varying stripe widths along the object surface. Stripe width is a function of the steepness of a surface part, i.e. the first derivative of the elevation. Stripe frequency and phase deliver similar cues and can be analyzed by a Fourier transform. Finally, the wavelet transform has recently been discussed for the same purpose. In many practical implementations, series of measurements combining pattern recognition, Gray codes and Fourier transform are obtained for a complete and unambiguous reconstruction of shapes. Another method also belonging to the area of fringe projection has been demonstrated, utilizing the depth of field of the camera. It is also possible to use projected patterns primarily as a means of structure insertion into scenes, for an essentially photogrammetric acquisition. === Precision and range === The optical resolution of fringe projection methods depends on the width of the stripes used and their optical quality. It is also limited by the wavelength of light. An extreme reduction of stripe width proves inefficient due to limitations in depth of field, camera resolution and display resolution. Therefore, the phase shift method has been widely established: A number of at least 3, typically about 10 exposures are taken with slightly shifted stripes. The first theoretical deductions of this method relied on stripes with a sine wave shaped intensity modulation, but the methods work with "rectangular" modulated stripes, as delivered from LCD or DLP displays as well. By phase shifting, surface detail of e.g. 1/10 the stripe pitch can be resolved. Current optical stripe pattern profilometry hence allows for detail resolutions down to the wavelength of light, below 1 micrometer in practice or, with larger stripe patterns, to approx. 1/10 of the stripe width. Concerning level accuracy, interpolating over several pixels of the acquired camera image can yield a reliable height resolution and also accuracy, down to 1/50 pixel. Arbitrarily large objects can be measured with accordingly large stripe patterns and setups. Practical applications are documented involving objects several meters in size. Typical accuracy figures are: Planarity of a 2-foot (0.61 m) wide surface, to 10 micrometres (0.00039 in). Shape of a motor combustion chamber to 2 micrometres (7.9×10−5 in) (elevation), yielding a volume accuracy 10 times better than with volumetric dosing. Shape of an object 2 inches (51 mm) large, to about 1 micrometre (3.9×10−5 in) Radius of a blade edge of e.g. 10 micrometres (0.00039 in), to ±0.4 μm === Navigation === As the method can measure shapes from only one perspective at a time, complete 3D shapes have to be combined from different measurements in different angles. This can be accomplished by attaching marker points to the object and combining perspectives afterwards by matching these markers. The process can be automated, by mounting the object on a motorized turntable on robotic inspection cell, or CNC positioning device. Markers can as well be applied on a positioning device instead of the object itself. The 3D data gathered can be used to retrieve CAD (computer aided design) data and models from existing components (reverse engineering), hand formed samples or sculptures, natural objects or artifacts. === Challenges === As with all optical methods, reflective or transparent surfaces raise difficulties. Reflections cause light to be reflected either away from the camera or right into its optics. In both cases, the dynamic range of the camera can be exceeded. Transparent or semi-transparent surfaces also cause major difficulties. In these cases, coating the surfaces with a thin opaque lacquer just for measuring purposes is a common practice. A recent method handles highly reflective and specular objects by inserting a 1-dimensional diffuser between the light source (e.g., projector) and the object to be scanned. Alternative optical techniques have been proposed for handling perfectly transparent and specular objects. Double reflections and inter-reflections can cause the stripe pattern to be overlaid with unwanted ligh

  Read more →
• 

  Protecting Our Kids from Social Media Addiction Act

  Protecting Our Kids from Social Media Addiction Act also known as California SB 976 is a law that was enacted in September 2024 that is meant to address problematic social media usage among minors. The law prohibitions minors to have "addictive feeds" unless they have verifiable parental consent, minor's notifications are also restricted between 12 am to 6 am and during school hours between 8 am and 3 pm it also well requires minors to have default privacies settings and have social media companies to publicly disclose certain metrics about their users. The law was set to take effect in two steps the first being the restrictions on social media feeds, notifications, disclosures from social media companies and default settings which would have taken effect on January 1, 2025, and the age verification provision which would have taken effect on January 1, 2027. However, has faced legal challenges since its enactment delaying its enactment. == Legal Challenges == In November 2024 NetChoice a trade association representing many of the biggest social media companies such as YouTube, Facebook and Instagram sued the attorney general of California Rob Bonta hoping to get an injunction before the first set of the law's provisions would take effect in January of the next year. However, judge Edward Davila would only grant Netchoice's request as to the restrictions on notifications and public disclosures and would deny their request as to the rest of the law. The law was later fully enjoined temporarily by the District Court and Appellant Court pending appeal, and the case is now in the Ninth Circuit Court of Appeals and is pending a decision. === Social media platforms challenges to law === In November 2025 Meta, Google and TikTok filed lawsuits against the law arguing it violates the first amendment.

  Read more →
• 

  Social advertising (social relationships)

  Social advertising is advertising that relies on social information or networks in generating, targeting, and delivering marketing communications. Many current examples of social advertising use a particular Internet service to collect social information, establish and maintain relationships with consumers, and for delivering communications. For example, the advertising platforms provided by Google, Twitter, and Facebook involve targeting and presenting ads based on relationships articulated on those same services. Social advertising can be part of a broader social media marketing strategy designed to connect with consumers. == Social targeting == Since a pair of consumers connected via a relationship are more likely to be similar than an unconnected pair, information about such relationships can be used to infer characteristics of consumers useful for targeting. For example, predictions of an individual's home location can be improved using geographic information about their peers. Existing advertising platforms can allow advertisers to explicitly target the peers (e.g., Facebook friends, Twitter followers) of consumers who have a known affiliation with their brand. Thus, one way social advertising is expected to be effective is because social networks encode information about unobserved characteristics of consumers, including their susceptibility to adopt a product and to influence their peers to adopt. Social advertisement targets audiences' demographics based on customers browsing histories. This helped companies understand users' interests and target a specific group of users. Whether it is location or personal interest, different categories of companies can make the consumers on social media rely heavily on their advertisements. This is one of the reasons why social advertising has grown over time. Targeting their audience to real life stakeholders generally increase the attention of the advertised deal which brings up more profits for companies. Subsequently, the psychological effects that social media gives off to its users play a huge role in advertisement companies keeping their customers online. One of the main reasons users rely on social media is because it's a source of entertainment that provides them with a feeling of inclusiveness. In making the customers feel the inclusiveness, social advertising targeting a specific group of users is presented as if these advertisements are customized for the users in their perspective making them feel the attention that they do not often feel in the real world. You can use Social signals checker tool to find more information about links. Social signals are metrics that measure how much people interact with your content on social media. From likes, to shares, to comments; each of these signals contributes to an overall number that tells search engines like Google how much people like your content. The more social signals your website gets, the more likely it is to rank higher in Google. The reason for this is two-fold. First, social media is used by millions of people every day, and if your content is being shared and interacted with on these sites, it shows that it’s worthy of being seen. And second, social media sites are highly trusted by Google. So if you can get your content seen and interacted with on these platforms, you’ll be off to a great start. == Social cues in advertisements == Social ads often include information about the affiliation of a peer with an advertised entity. For example, a social ad might indicate a friend has endorsed a product, highly rated a restaurant, or watched a particular film. In fact, some definitions make these personalized social signals a necessary condition for the advertising being social advertising. Inclusion of personalized social signals creates a channel for social influence. Experiments that remove peers' names or images from social advertisements provide evidence that their presence increases proximal outcomes (e.g., clicks on advertisements). This is technically how trends are started on social media. Since social media links a single profile to thousands of other accounts some being real-life friends or even acquaintances, the opinions and the bias a user has for other users who are also a customer of an advertisement on the feed can heavily affect whether to click on the advertisement or not. Once this pattern continues, the brand benefits from increased customers, profit, and attention. Social networking can spread rapidly because 71 percent of the world's population contributes and uses social media which means social advertising gives companies a better marketing technique than a physical poster advertisement. == Word of mouth == Advertisers often attempt to use word of mouth to affect consumers and their decisions to adopt products and services. Ads and other inducements targeted at a seed set of individuals can be designed to produce a larger cascade of adoption through influence. Businesses are also using social media to attempt to identify and persuade influential consumers to spread positive messages about their products or services. Consequently, not only on social platforms but also in physical settings, users start talking to each other. When individuals develop an intimate relationship with each other, it is quite heavily based on shared characteristics, interests, and personalities. If one social media user becomes a regular customer to a well-known company that advertises often, there is a higher chance that all the other people who have intimate relationships with that one customer will be exposed to the online advertisement more than another user who might be completely new to a brand that is being advertised on screen. In reality, this happens to not only one user but to most of the users which mean a single brand advertisement online can have to potential of being talked about between billions and trillions of people all around the globe. == Relationship marketing == To accurately conduct relationship marketing, businesses must develop and manage six marketplaces: internal, customer, referral, supplier, influencer and employee. To maintain relationship marketing, customers often see social media influencers getting free sponsorships or PR boxes just to advertise their products. At times, users who become customers through these social influencers will get a better deal than regular customers which stands as a very commonly used marketing technique. By doing this, users think they are receiving special treatment when in reality it very much benefits social influencers and brands. Especially for brands that are just starting, they use this marketing technique so that their names can be out there, and people will start talking, which is their initial goal.

  Read more →
• 

  Telenet

  Telenet was an American commercial packet-switched network which went into service in August 16, 1975. It was the first FCC-licensed public data network in the United States. Various commercial and government interests paid monthly fees for dedicated lines connecting their computers and local networks to this backbone network. Free public dialup access to Telenet, for those who wished to access these systems, was provided in hundreds of cities throughout the United States. == History == After establishing that commercial operation of "value added carriers" was legal in the U.S., Bolt Beranek and Newman (BBN), who were the private contractors for constructing packet switching nodes (Interface Message Processor) for the ARPANET, set out to create a private sector version. The original founding company, Telenet Inc., was established by BBN. In January 1975, Telenet Communications Corporation announced that they had acquired the necessary venture capital after a two-year quest. Initially, Bob Kahn was the first President of Telenet; he then moved to ARPA as Larry Roberts left to become President of the company. Barry Wessler also joined from ARPA. On August 16 of the same year they began operating the first public data network. The network offered an email service called Telemail. Telenet had its first offices in downtown Washington, D.C., then moved to McLean, Virginia. It was acquired by GTE in 1979, and then moved to offices in Reston, Virginia. It was later acquired by Sprint and called "Sprintnet". Sprint migrated customers from Telenet to the modern-day Sprintlink IP network, one of many networks composing today's Internet. == Coverage == Originally, the public network had switching nodes in seven US cities: Washington, D.C. (network operations center as well as switching) Boston, Massachusetts New York, New York Chicago, Illinois Dallas, Texas San Francisco, California Los Angeles, California The switching nodes were fed by Telenet Access Controller (TAC) terminal concentrators both colocated and remote from the switches. By 1980, there were over 1000 switches in the public network. At that time, the next largest network using Telenet switches was that of Southern Bell, which had approximately 250 switches. In 1977, Telenet added a London node and a Network Control Centre in a London building of Britain's Post Office Telecommunications. == Internal network technology == Telenet initially used a proprietary virtual connection host interface. The network used statically defined hop-by-hop routing, using Prime commercial minicomputers as switches, but then migrated to a purpose-built multiprocessing switch based on 6502 microprocessors. Among the innovations of this second-generation switch was a patented arbitrated bus interface that created a switched fabric among the microprocessors. By contrast, a typical microprocessor-based system of the time used a bus; switched fabrics did not become common until about twenty years later, with the advent of PCI Express and HyperTransport. Most interswitch lines ran at 56 kbit/s, with a few, such as New York-Washington, at T1 (i.e., 1.544 Mbit/s). Originally, the switching tables could not be altered separately from the main executable code, and topology updates had to be made by deliberately crashing the switch code and forcing a reboot from the network management center. Improvements in the software allowed new tables to be loaded, but the network never used dynamic routing protocols. Multiple static routes, on a switch-by-switch basis, could be defined for fault tolerance. Network management functions continued to run on Prime minicomputers. Roberts and Barry Wessler joined the international effort to standardize the a protocol for packet-switched data communication based on virtual circuits shortly before it was finalized. The CCITT proposal for X.25 was being prepared by Rémi Després and other international experts. A few minor changes, which complemented the proposed specification, were accommodated to enable Telenet to join the agreement. Telenet adopted X.25 shortly after the protocol was published in March 1976. Its X.25 host interface was the first in the industry. The main internal protocol was a proprietary variant on X.75; Telenet also ran standard X.75 gateways to other packet switching networks. == Accessing the network == === Basic asynchronous access === Users could use modems on the Public Switched Telephone Network to dial TAC ports, calling either from "dumb" terminals or from computers emulating such terminals. Organizations with a large number of local terminals could install a TAC on their own site, which used a dedicated line, at up to 56 kbit/s, to connect to a switch at the nearest Telenet location. Dialup modems supported had a maximum speed of 1200 bit/s, and later 4800 bit/s. For example, a customer in NYC could dial into the local number, then type in a command similar to: which would connect (that "c") them to a computer system designated as number "555" located in the same vicinity as the standard telephone "area code" 301. One significant customer was an early (what would now be called) internet service provider The Source which had their equipment in Mclean, Va. Telenet offered a much lower nighttime rate when there were few corporate customers, and this let The Source set up a modestly priced offering to tens of thousands of customers. Another prominent customer in the 1980s was Quantum Link (now AOL). === Other access protocols === Telenet supported remote concentrators for IBM 3270 family intelligent terminals, which communicated, via X.25 to Telenet-written software that ran in IBM 370x series front-end processors. Telenet also supported Block Mode Terminal Interfaces (BMTI) for IBM Remote Job Entry terminals supporting the 2780/3780 and HASP Bisync protocols. === PC Pursuit === In the late 1980s, Telenet offered a service called PC Pursuit. For a flat monthly fee, customers could dial into the Telenet network in one city, then dial out on the modems in another city to access bulletin board systems and other services. PC Pursuit was popular among computer hobbyists because it sidestepped long-distance charges. In this sense, PC Pursuit was similar to the Internet, allowing any user to call any system as if it were local. On connection to the network, the user entered a 5-letter code for the target city they wished to call. This consisted of a 2-letter state code and a 3-letter acronym for the city. For instance, to call a system in Cleveland, Ohio, the user would enter the code OHCLV, for "OHio", "CLeVeland". Once connected, the user could dial out to any local number, and the system simulated a direct connection between the two endpoints.

  Read more →
• 

  Lynda Soderholm

  Lynda Soderholm is a physical chemist at the U.S. Department of Energy's (DOE) Argonne National Laboratory with a specialty in f-block elements. She is a senior scientist and the lead of the Actinide, Geochemistry & Separation Sciences Theme within Argonne's Chemical Sciences and Engineering Division. Her specific role is the Separation Science group leader within Heavy Element Chemistry and Separation Science (HESS), directing basic research focused on low-energy methods for isolating lanthanide and actinide elements from complex mixtures. She has made fundamental contributions to understanding f-block chemistry and characterizing f-block elements. Soderholm became a Fellow of the American Association for the Advancement of Science (AAAS) in 2013, and is also an Argonne Distinguished Fellow. == Early life and education == Soderholm was awarded her PhD in 1982 by McMaster University under the direction of Prof John Greedan. Her dissertation focused on characterizing the structural and magnetic properties of a series of ternary f-ion oxides. After graduating, she was awarded a NATO postdoctoral fellow at the Centre national de la recherche scientifique in France from 1982 until 1985. After a short postdoctoral appointment as an Argonne postdoctoral fellow she was promoted to staff scientist the same year. Over several years, she moved up the ranks, becoming a senior chemist in 2001. She was also an adjunct professor at the University of Notre Dame from 2003 until 2007. In 2021, Soderholm was appointed interim Division Director for the Chemical Sciences and Engineering Division. == Career and research == === Uncovering structure of Yttrium-123 Superconductor === Early in her career, Soderholm focused on the characterizing the magnetic and electronic behavior of compounds containing f-ions (lanthanides and actinides) with a focus on high-Tc materials, compounds that are superconducting under usually high temperatures. She was part of the research group that first determined the structure of YBa2Cu3O7. Their discovery formed the foundation for the further developments in the broad field of superconductivity. === Understanding f-ion speciation in solution === Continuing her interest in the f-elements, Soderholm shifted her focus from solid-state materials to nanoparticles and solutions, taking advantage of advances in X-ray structural probes made available by synchrotron facilities. Building on her earlier work using neutron scattering, her team became the first to discover that plutonium exists in solution as tiny, well-defined nanoparticles. This work solved a longstanding problem in understanding transport of plutonium in the environment and resulted in the development of a new, patented approach to separating plutonium during nuclear reprocessing. === Using machine learning to evaluate molecular structures === Soderholm's more recent projects use machine learning to understand the influence of complex molecular structuring in solutions, in connection with low-energy processes for separation of f-block elements from complex mixtures. == Awards and honors == University of Chicago Board of Governors' Distinguished Performance Award, 2009. Fellow of the American Association for the Advancement of Science, 2013. Argonne Distinguished Fellow, 2016 DOE materials sciences research competition for Outstanding Scientific Accomplishments in Solid State Physics, 1987. == Select publications == Beno, M. A.; Soderholm, L.; Capone, D. W., II; Hinks, D. G.; Jorgensen, J. D.; Grace, J. D.; Schuller, I. K.; Segre, C. U.; Zhang, K., Structure of the single-phase high-temperature superconductor yttrium barium copper oxide (YBa2Cu3O7−δ). Appl. Phys. Lett. 1987, 51 (1), 57–9. Soderholm, L.; Zhang, K.; Hinks, D. G.; Beno, M. A.; Jorgensen, J. D.; Segre, C. U.; Schuller, I. K., Incorporation of praseodymium in YBa2Cu3O7−δ: electronic effects on superconductivity. Nature (London) 1987, 328 (6131), 604–5. Antonio, M. R.; Williams, C. W.; Soderholm, L., Berkelium redox speciation. Radiochim. Acta 2002, 90 (12), 851–856. Soderholm, L.; Skanthakumar, S.; Neuefeind, J., Determination of actinide speciation in solution using high-energy X-ray scattering. Anal. Bioanal. Chem. 2005, 383 (1), 48–55. Forbes, T. Z.; Burns, P. C.; Skanthakumar, S.; Soderholm, L., Synthesis, structure, and magnetism of Np2O5. J. Am. Chem. Soc. 2007, 129 (10), 2760–2761. Soderholm, L.; Almond, P. M.; Skanthakumar, S.; Wilson, R. E.; Burns, P. C., The structure of the plutonium oxide nanocluster [Pu38O56Cl54(H2O)8]14-. Angew. Chem., Int. Ed. 2008, 47 (2), 298–302. Jensen, M. P.; Gorman-Lewis, D.; Aryal, B.; Paunesku, T.; Vogt, S.; Rickert, P. G.; Seifert, S.; Lai, B.; Woloschak, G. E.; Soderholm, L., An iron-dependent and transferrin-mediated cellular uptake pathway for plutonium. Nat. Chem. Biol. 2011, 7 (8), 560–565. Wilson, R. E.; Skanthakumar, S.; Soderholm, L., Separation of Plutonium Oxide Nanoparticles and Colloids. Angew. Chem., Int. Ed. 2011, 50 (47), 11234–11237. Knope, K. E.; Soderholm, L., Solution and solid-state structural chemistry of actinide hydrates and their hydrolysis and condensation products. Chem. Rev. 2013, 113 (2), 944–994. Luo, G.; Bu, W.; Mihaylov, M.; Kuzmenko, I.; Schlossman, M. L.; Soderholm, L., X-ray reflectivity reveals a nonmonotonic ion-density profile perpendicular to the surface of ErCl3 aqueous solutions. J. Phys. Chem. C 2013, 117 (37), 19082–19090. Jin, G. B.; Lin, J.; Estes, S. L.; Skanthakumar, S.; Soderholm, L., Influence of countercation hydration enthalpies on the formation of molecular complexes: A thorium-nitrate example. J. Am. Chem. Soc. 2017, 139 (49), 18003–18008. == Patents == Solvent extraction system for plutonium colloids and other oxide nano-particles, (2016).

  Read more →
• 

  Forking lemma

  The forking lemma is any of a number of related lemmas in cryptography research. The lemma states that if an adversary (typically a probabilistic Turing machine), on inputs drawn from some distribution, produces an output that has some property with non-negligible probability, then with non-negligible probability, if the adversary is re-run on new inputs but with the same random tape, its second output will also have the property. This concept was first used by David Pointcheval and Jacques Stern in "Security proofs for signature schemes," published in the proceedings of Eurocrypt 1996. In their paper, the forking lemma is specified in terms of an adversary that attacks a digital signature scheme instantiated in the random oracle model. They show that if an adversary can forge a signature with non-negligible probability, then there is a non-negligible probability that the same adversary with the same random tape can create a second forgery in an attack with a different random oracle. The forking lemma was later generalized by Mihir Bellare and Gregory Neven. The forking lemma has been used and further generalized to prove the security of a variety of digital signature schemes and other random-oracle based cryptographic constructions. == Statement of the lemma == The generalized version of the lemma is stated as follows. Let A be a probabilistic algorithm, with inputs (x, h1, ..., hq; r) that outputs a pair (J, y), where r refers to the random tape of A (that is, the random choices A will make). Suppose further that IG is a probability distribution from which x is drawn, and that H is a set of size h from which each of the hi values are drawn according to the uniform distribution. Let acc be the probability that on inputs distributed as described, the J output by A is greater than or equal to 1. We can then define a "forking algorithm" FA that proceeds as follows, on input x: Pick a random tape r for A. Pick h1, ..., hq uniformly from H. Run A on input (x, h1, ..., hq; r) to produce (J, y). If J = 0, then return (0, 0, 0). Pick h'J, ..., h'q uniformly from H. Run A on input (x, h1, ..., hJ−1, h'J, ..., h'q; r) to produce (J', y'). If J' = J and hJ ≠ h'J then return (1, y, y'), otherwise, return (0, 0, 0). Let frk be the probability that FA outputs a triple starting with 1, given an input x chosen randomly from IG. Then frk ≥ acc ⋅ ( acc q − 1 h ) . {\displaystyle {\text{frk}}\geq {\text{acc}}\cdot \left({\frac {\text{acc}}{q}}-{\frac {1}{h}}\right).} === Intuition === The idea here is to think of A as running two times in related executions, where the process "forks" at a certain point, when some but not all of the input has been examined. In the alternate version, the remaining inputs are re-generated but are generated in the normal way. The point at which the process forks may be something we only want to decide later, possibly based on the behavior of A the first time around: this is why the lemma statement chooses the branching point (J) based on the output of A. The requirement that hJ ≠ h'J is a technical one required by many uses of the lemma. (Note that since both hJ and h'J are chosen randomly from H, then if h is large, as is usually the case, the probability of the two values not being distinct is extremely small.) === Example === For example, let A be an algorithm for breaking a digital signature scheme in the random oracle model. Then x would be the public parameters (including the public key) A is attacking, and hi would be the output of the random oracle on its ith distinct input. The forking lemma is of use when it would be possible, given two different random signatures of the same message, to solve some underlying hard problem. An adversary that forges once, however, gives rise to one that forges twice on the same message with non-negligible probability through the forking lemma. When A attempts to forge on a message m, we consider the output of A to be (J, y) where y is the forgery, and J is such that m was the Jth unique query to the random oracle (it may be assumed that A will query m at some point, if A is to be successful with non-negligible probability). (If A outputs an incorrect forgery, we consider the output to be (0, y).) By the forking lemma, the probability (frk) of obtaining two good forgeries y and y' on the same message but with different random oracle outputs (that is, with hJ ≠ h'J) is non-negligible when acc is also non-negligible. This allows us to prove that if the underlying hard problem is indeed hard, then no adversary can forge signatures. This is the essence of the proof given by Pointcheval and Stern for a modified ElGamal signature scheme against an adaptive adversary. == Known issues with application of forking lemma == The reduction provided by the forking lemma is not tight. Pointcheval and Stern proposed security arguments for Digital Signatures and Blind Signature using Forking Lemma. Claus P. Schnorr provided an attack on blind Schnorr signatures schemes, with more than p o l y l o g ( n ) {\displaystyle polylog(n)} concurrent executions (the case studied and proven secure by Pointcheval and Stern). A polynomial-time attack, for Ω ( n ) {\displaystyle \Omega (n)} concurrent executions, was shown in 2020 by Benhamouda, Lepoint, Raykova, and Orrù. Schnorr also suggested enhancements for securing blind signatures schemes based on discrete logarithm problem.

  Read more →
• 

  Peñabot

  Peñabot is the nickname for automated social media accounts allegedly used by the Mexican government of Enrique Peña Nieto and the PRI political party to keep unfavorable news from reaching the Mexican public. Peñabot accusations are related to the broader issue of fake news in the 21st century. == History of disinformation in Mexican politics == The PRI political party has been reported to use fake news since before Peña Nieto. The main tactic originally was to spread such propaganda through open radio and television networks. Such tactic was effective in Mexico, because newspaper readership is low and cable TV is largely limited to the middle classes; consequently, the country's two major television networks – Televisa and TV Azteca – exert a significant influence in national politics. Televisa itself, not only owns around two-thirds of the programming on Mexico's TV channels, making it not only Mexico's largest television network, but also is the largest media network in the Spanish-speaking world. == Peñabots == Analysts have given the name Peñabots to a suspected network of automated accounts on social media used by the Mexican government to spread pro-government propaganda and to marginalize dissenting opinions in social media. The bots were first noticed in the 2012 elections when they were used to disseminate opinions in support of Enrique Peña Nieto on social networks such as Twitter and Facebook. According to Aristegui Noticias, their usage went against articles 6 and 134 of the Mexican Constitution. Those used by Peña Nieto's government cost an estimated 80 million pesos monthly, which news outlets argued only helped the government spread fake support towards the president, but did not have a benefit towards Mexican people (with whom EPN was highly unpopular). Facebook held approximately 640,321 Peñabots, while Twitter had less. As of July 2017, Oxford Internet Institute's Computational Propaganda Research Project claimed many western democracies, Mexico included, perform social media manipulation, thus saying the manipulation comes directly from the Mexican government itself. During Peña Nieto's subsequent presidency, analysts noted that Peñabots were used to overpower trending topics that critiqued government, to flood trending government critical hashtags with spam, to create fake trends by pushing alternative hashtags, and to push smear campaigns and threats against government-critical activists and journalists. Peñabots were distinguished as their pattern of activity was distinct from that of ordinary interaction on social networks. === Meadebots === On Twitter it was reported that about 94% of the followers of 2018 presidential candidate from the PRI Jose Antonio Meade were bots. When Antonio Meade presented himself as a candidate for the 2018 presidential election, his social media accounts such as "@MovimientoMEADE" (created by the PRI's official account @PRI_Nacional), obtained a huge quantity of followers in a short span of time. Some users noticed and brought it to attention, and after investigation it was reported 94% of such followers were bots (702,000 out of 747,000), and the account was eliminated from Twitter after 20 hours. The fake accounts used the hashtags #YoConMeade and #Meade18. It was further revealed was that Meade's official account on Twitter, @JoseAMeadeK had 25% bots (216,000 fake followers out of the 981,000). == Manipulation of news media in Mexico, through television == The Mexican government of Peña Nieto has been accused of using various means to keep unfavorable news from reaching the Mexican people. Many Mexicans have protested this practice as it clearly goes against the freedom of speech. The PRI has been reported to use fake news since before Peña Nieto. The main tactic has been to spread such propaganda through radio and television. This tactic is perceived as effective in Mexico, because newspaper readership is low and research on the Internet and cable TV is largely limited to the middle classes; consequently, the country's two major television networks – Televisa and TV Azteca – exert a significant influence in national politics. Televisa itself, owns around two-thirds of the programming on Mexico's TV channels, making it not only Mexico's largest television network, but also is the largest media network in the Spanish-speaking world. In June 2012, before the 2012 Mexican presidential elections, the British newspaper The Guardian published a series of allegations claiming Televisa, sold favorable coverage to top politicians in its news and entertainment shows, this scandal became known as the Televisa controversy. The documents published by 'The Guardian alleged that a secretive circle within Televisa manipulated news coverage to favor PRI presidential candidate Enrique Peña Nieto, who was poised as favorite to win. Televisa's secret circle supposedly commissioned videos to promote Peña Nieto and lash out his political rivals in 2009. The Guardian documents suggest that Televisa's secret team distributed such videos through e-mail, posting them posted them on Facebook and YouTube, some can still be seen there. Another document was a PowerPoint presentation, with a slide explicitly aimed at rival leftist candidate of the Party of the Democratic Revolution (PRD), Andrés Manuel López Obrador. Supposedly given to The Guardian by a Televisa employee. The document's authenticity was never possible to confirm– however dates, names, and events largely coincide. Televisa refused to talk the documents, and denied a relationship with the PRI or its presidential candidate, saying that they had provided equal media coverage to all parties. Televisa published an article supposedly showing discrepancies in The Guardian documents and denying accusations. Mexican citizens complained about the perceived favoritism towards Enrique Peña Nieto and the PRI, protesting through the Yo Soy 132 movement which Televisa covered in detail. However, Televisa's news media coverage is perceived to have been biased, by using a media coverage tactic Mexican citizens call cortinas de humo (smoke screens). These introduce a news scandal giving extensive coverage to distract citizens from a potential conflict-of-interest or controversy that could damage the image of the politician favored by the network. An example of a perceived smoke screen would be the news media coverage of "Caso Michoacán" and "Caso Paolette" distracting all the attention from the parallel "Yo soy 132" movement. A few years later, on the day of September 11, 2016; factual evidence of Televisa's performing media manipulation emerged, when a Televisa news anchor while live-on air reading a teleprompter, mistakenly read out loud that "try that Jaime "Ël Bronco" Rodríguez Calderón (Nuevo Leon's governor) is mentioned as little as possible". Newspaper El Universal caught it on video and published it social media. Televisa didn't mention the story and declined to comment. Lack of news coverage concerning Nuevo León's Governor Jaime Rodriguez, is perceived due to him being the first elected governor to not be part of any political party (Independent Governor), and because unlike the governors from the PRI preceding him, the independent governor "El Bronco" doesn't spend money on publicity at all, preferring to communicate all news by using social media such as Twitter and Facebook. While the incident may have proven Televisa's bias, there wasn't anything to incriminate the PRI political party or Enrique Peña Nieto, though it did further suspicion of Televisa manipulating news media. In contrast, a December 2017 article of The New York Times, reported Enrique Peña Nieto spending about 2000 million dollars on publicity, during his first 5 years as president, the largest publicity budget ever spent by a Mexican President. Additionally, 68 percent of news journalists admitted to not believe to have enough freedom of speech, and award-winning news reporter Carmen Aristegui was controversially fired shortly after revealing the Mexican White House scandals. == Violence and spying towards news journalists and civil rights activists == Far for only being receiving accusations of spreading fake news, the Mexican government of EPN (Enrique Peña Nieto) has also been accused of violence towards news journalists, and of spying on them, and also towards civil right leaders and their families. During his tenure as president, Peña Nieto has been accused of failing to protect news journalists, whose deaths are speculated to be politically triggered, by politicians attempting to prevent them from covering political scandals. The New York Times published a news report on the matter titled, "In Mexico it's easy to kill a journalist", on it mentioning how during EPN's government, Mexico became one of the worst countries on which to be a journalist. The assassination of journalist Javier Valdez on May 23, 2017, received national coverage, with multiple news journalists

  Read more →
• 

  Group key

  In cryptography, a group key is a cryptographic key that is shared between a group of users. Typically, group keys are distributed by sending them to individual users, either physically, or encrypted individually for each user using either that user's pre-distributed private key. A common use of group keys is to allow a group of users to decrypt a broadcast message that is intended for that entire group of users, and no one else. For example, in the Second World War, group keys (known as "iodoforms", a term invented by a classically educated non-chemist, and nothing to do with the chemical of the same name) were sent to groups of agents by the Special Operations Executive. These group keys allowed all the agents in a particular group to receive a single coded message. In present-day applications, group keys are commonly used in conditional access systems, where the key is the common key used to decrypt the broadcast signal, and the group in question is the group of all paying subscribers. In this case, the group key is typically distributed to the subscribers' receivers using a combination of a physically distributed secure cryptoprocessor in the form of a smartcard and encrypted over-the-air messages.

  Read more →
• 

  Structured-light 3D scanner

  A structured-light 3D scanner is a device used to capture the three-dimensional shape of an object by projecting light patterns, such as grids or stripes, onto its surface. The deformation of these patterns is recorded by cameras and processed using specialized algorithms to generate a detailed 3D model. Structured-light 3D scanning is widely employed in fields such as industrial design, quality control, cultural heritage preservation, augmented reality gaming, and medical imaging. Compared to laser-based 3D scanning, structured-light scanners use non-coherent light sources, such as LEDs or projectors, which enable faster data acquisition and eliminate potential safety concerns associated with lasers. However, the accuracy of structured-light scanning can be influenced by external factors, including ambient lighting conditions and the reflective properties of the scanned object. == Principle == Projecting a narrow band of light onto a three-dimensional surface creates a line of illumination that appears distorted when viewed from perspectives other than that of the projector. This distortion can be analyzed to reconstruct the geometry of the surface, a technique known as light sectioning. Projecting patterns composed of multiple stripes or arbitrary fringes simultaneously enables the acquisition of numerous data points at once, improving scanning speed. While various structured light projection techniques exist, parallel stripe patterns are among the most commonly used. By analyzing the displacement of these stripes, the three-dimensional coordinates of surface details can be accurately determined. === Generation of light patterns === Two major methods of stripe pattern generation have been established: Laser interference and projection. The laser interference method works with two wide planar laser beam fronts. Their interference results in regular, equidistant line patterns. Different pattern sizes can be obtained by changing the angle between these beams. The method allows for the exact and easy generation of very fine patterns with unlimited depth of field. Disadvantages are high cost of implementation, difficulties providing the ideal beam geometry, and laser typical effects like speckle noise and the possible self interference with beam parts reflected from objects. Typically, there is no means of modulating individual stripes, such as with Gray codes. The projection method uses incoherent light and basically works like a video projector. Patterns are usually generated by passing light through a digital spatial light modulator, typically based on one of the three currently most widespread digital projection technologies, transmissive liquid crystal, reflective liquid crystal on silicon (LCOS) or digital light processing (DLP; moving micro mirror) modulators, which have various comparative advantages and disadvantages for this application. Other methods of projection could be and have been used, however. Patterns generated by digital display projectors have small discontinuities due to the pixel boundaries in the displays. Sufficiently small boundaries however can practically be neglected as they are evened out by the slightest defocus. A typical measuring assembly consists of one projector and at least one camera. For many applications, two cameras on opposite sides of the projector have been established as useful. Invisible (or imperceptible) structured light uses structured light without interfering with other computer vision tasks for which the projected pattern will be confusing. Example methods include the use of infrared light or of extremely high framerates alternating between two exact opposite patterns. === Calibration === Geometric distortions by optics and perspective must be compensated by a calibration of the measuring equipment, using special calibration patterns and surfaces. A mathematical model is used for describing the imaging properties of projector and cameras. Essentially based on the simple geometric properties of a pinhole camera, the model also has to take into account the geometric distortions and optical aberration of projector and camera lenses. The parameters of the camera as well as its orientation in space can be determined by a series of calibration measurements, using photogrammetric bundle adjustment. === Analysis of stripe patterns === There are several depth cues contained in the observed stripe patterns. The displacement of any single stripe can directly be converted into 3D coordinates. For this purpose, the individual stripe has to be identified, which can for example be accomplished by tracing or counting stripes (pattern recognition method). Another common method projects alternating stripe patterns, resulting in binary Gray code sequences identifying the number of each individual stripe hitting the object. An important depth cue also results from the varying stripe widths along the object surface. Stripe width is a function of the steepness of a surface part, i.e. the first derivative of the elevation. Stripe frequency and phase deliver similar cues and can be analyzed by a Fourier transform. Finally, the wavelet transform has recently been discussed for the same purpose. In many practical implementations, series of measurements combining pattern recognition, Gray codes and Fourier transform are obtained for a complete and unambiguous reconstruction of shapes. Another method also belonging to the area of fringe projection has been demonstrated, utilizing the depth of field of the camera. It is also possible to use projected patterns primarily as a means of structure insertion into scenes, for an essentially photogrammetric acquisition. === Precision and range === The optical resolution of fringe projection methods depends on the width of the stripes used and their optical quality. It is also limited by the wavelength of light. An extreme reduction of stripe width proves inefficient due to limitations in depth of field, camera resolution and display resolution. Therefore, the phase shift method has been widely established: A number of at least 3, typically about 10 exposures are taken with slightly shifted stripes. The first theoretical deductions of this method relied on stripes with a sine wave shaped intensity modulation, but the methods work with "rectangular" modulated stripes, as delivered from LCD or DLP displays as well. By phase shifting, surface detail of e.g. 1/10 the stripe pitch can be resolved. Current optical stripe pattern profilometry hence allows for detail resolutions down to the wavelength of light, below 1 micrometer in practice or, with larger stripe patterns, to approx. 1/10 of the stripe width. Concerning level accuracy, interpolating over several pixels of the acquired camera image can yield a reliable height resolution and also accuracy, down to 1/50 pixel. Arbitrarily large objects can be measured with accordingly large stripe patterns and setups. Practical applications are documented involving objects several meters in size. Typical accuracy figures are: Planarity of a 2-foot (0.61 m) wide surface, to 10 micrometres (0.00039 in). Shape of a motor combustion chamber to 2 micrometres (7.9×10−5 in) (elevation), yielding a volume accuracy 10 times better than with volumetric dosing. Shape of an object 2 inches (51 mm) large, to about 1 micrometre (3.9×10−5 in) Radius of a blade edge of e.g. 10 micrometres (0.00039 in), to ±0.4 μm === Navigation === As the method can measure shapes from only one perspective at a time, complete 3D shapes have to be combined from different measurements in different angles. This can be accomplished by attaching marker points to the object and combining perspectives afterwards by matching these markers. The process can be automated, by mounting the object on a motorized turntable on robotic inspection cell, or CNC positioning device. Markers can as well be applied on a positioning device instead of the object itself. The 3D data gathered can be used to retrieve CAD (computer aided design) data and models from existing components (reverse engineering), hand formed samples or sculptures, natural objects or artifacts. === Challenges === As with all optical methods, reflective or transparent surfaces raise difficulties. Reflections cause light to be reflected either away from the camera or right into its optics. In both cases, the dynamic range of the camera can be exceeded. Transparent or semi-transparent surfaces also cause major difficulties. In these cases, coating the surfaces with a thin opaque lacquer just for measuring purposes is a common practice. A recent method handles highly reflective and specular objects by inserting a 1-dimensional diffuser between the light source (e.g., projector) and the object to be scanned. Alternative optical techniques have been proposed for handling perfectly transparent and specular objects. Double reflections and inter-reflections can cause the stripe pattern to be overlaid with unwanted ligh

  Read more →
• 

  TRAME

  TRAME (TRAnsmission of MEssages) was the name of the second computer network in the world similar to the internet to be used in an electric utility. Like the internet, the base technology was packet switching; it was developed by the electric utility ENHER in Barcelona. It was deployed by the same utility, first in Catalonia and Aragón, Spain, and later in other places. Its development started in 1974 and the first routers, called nodes at that time, were deployed by 1978. The network was in operation until 2016 (38 years) with successive technological software and hardware updates. == Beginnings == In 1974, packet switching was a technology known only in research circles. The concept began in 1968 in association with the United States' Advanced Research Projects Agency (ARPA) research project ARPANET. The idea of applying the packet switching concept to electric utilities control communication networks first appeared in 1974 when the Swedish power utility Vattenfall started to create its TIDAS packet-switching network and was followed by the Spanish electric utility ENHER, which aimed to telecontrol and automate its high-voltage power grid. For this purpose, ENHER created a specific team of people to develop both the packet-switching network and the supervisory control and data acquisition (SCADA) system, also called the telecontrol system. By 1978 the first four TRAME routers were available and by 1980, eight of them were deployed and operating. The printed circuit boards (PCBs) controlling the communication lines were connected to a shared memory PCB allowing them to exchange data and messages. The project was developed together with its main initial application, the Telecontrol or SCADA system SICL (Sistema Integral de Control Local) with which initially they shared a very similar hardware. The maximum link capacity was 9600 bit/s, which in 1980 was the maximum possible on a 4 kHz wide voice channel at the time. These channels were the basic unit of the then-analog communication systems in use. By that time power utilities used either telephone calls or low speed (below 1200bit/s) dedicated links for telecontrol, typically shared among ten high-voltage electrical substations. == Services == The basic service provided by the TRAME network was SCADA or Telecontrol to automate the high-voltage power grid, thus improving operational efficiency, which was until then operated manually with telephone communication between human operators. Each TRAME router was associated with one or more remote terminal units (RTUs) of the SICL telecontrol system. It also had connected screens, and later PCs, located in electrical substations to interchange messages between them and with the Control Center located in the well-known Casa Fuster in Barcelona. It was a kind of predecessor to today's e-mail. Later, in the 1990s, other protocols (X.25, IP) were developed to include corporate information technology (IT) terminals, company physical surveillance systems and other services. Additionally, applications and terminals were developed for the transmission of voice and video over the TRAME network. == Protocols == The TRAME routing system, like that of the original ARPANET, was based on the Bellman-Ford algorithm but with "split-horizon" as in the Swedish TIDAS network, but with an original improvement. This protocol allows optimal paths to be found in meshed networks for each packet to be transmitted, allowing the shared use of the same network by multiple services. In contrast, traditional circuit-switched technology used to establish dedicated circuits for each service or communication. The addressing of routers and terminals used a proprietary system with a 16-bit address; it would be the equivalent of the well-known IP (Internet Protocol) version 4 (IPv4), still in use on the internet today, which uses 32-bit addresses. It is necessary to take into account that in 1978, the IPv4 protocol did not yet exist since the IPv4 version used on the internet did not appear until 1981, and in fact, did not reach the general public until much later. The line protocols were also proprietary and were called UCL (Unidad de Control de Línea, 'line control unit'), which linked the routers together, and UTR (Unión TRAME-Remotas), the access protocol. They were designed to offer the highest quality of service required by the telecontrol/SCADA function in terms of data integrity and availability set by the International Electrotechnical Commission (IEC) IEC-870-5-1 and ANSI C37.1. standards, and because the protocol used at the time in corporate computer networks, HDLC (high-level data link control), did not offer enough quality for critical industrial applications. Later on, other protocols like X.25 and IP were also made compatible with the aforementioned TRAME protocols. In 2000, the UTR protocol was replaced by the international standard IEC 60870- 5-101/104. Initially network flow control was based on the management of eight data priorities in head-of-the-line (HOL) waiting queues. Later and after some experimentation, a flow control method based on a bit indicating route congestion and management of the gap between packets when accessing the network was adopted. This required measuring the capacity of the route bottleneck. An end-to-end protocol was also added for some flows requiring order preservation like X.25. == Evolution == To last for 38 years, the technology had to endure intense evolution. There were essentially four TRAME generations which are summarized in the table. A description of the four generations of TRAME is provided below. === TRAME 1 === The project began in 1974 and in 1978 a first network with four routers was already installed and in operation at the electric utility ENHER. In 1980, the network had eight nodes in operation (see Figure I). The hardware was based on the Zilog Z80 processor and had a multiprocessor structure with 16 processors sharing a common memory. The software was developed at ENHER's headquarters located in the well-known Casa Fuster, Passeig de Gràcia, 132, Barcelona, using the Z80 assembly language. Beyond 1980 the software began to be written in C programming language and an HP64000 Logic Development System emulator was used for the purpose. The hardware was produced by ISEL, an INI (Instituto Nacional de Indústria) company. The routing system was a variant of Bellman-Ford with split-horizon. It was an improvement of the original ARPA network routing system consisting of an original update procedure which allowed for a faster reaction to changes. The distance function was the number of packets in the output waiting queues plus one. The line protocols (UCL for internal lines linking routers and UTR for accessing the network) were designed to meet the stringent requirements set for telecontrol (SCADA) of high-voltage power networks (IEC-870-5-1 and ANSI C37.1 standards). At the OSI transport layer, windows with a width of 1 to 8, depending on the required service, residing in the terminals were used. Initially, addresses were only 14 bits long to address both the routers (called nodes by then) and the devices connected to them. They were made up of two fields, an 8-bit field to address the router and a 6-bit sub-address to address the terminals connected to it. The node address was assigned to the nodes and not to the ends of the links as in the internet. The basic advantages of TRAME over other technologies used in electric utilities at the time were in part due to the packet technology itself: ability to manage any network topology, automatic adaptability to topological and traffic changes, integration of different link technologies (digital or analog) and capacities in a single network, open and decentralized intercommunicability between users and devices, simultaneous communication with several users and locations from a single physical connection, and integrated network supervision. In fact, the network was provided from its inception with a supervision center consisting of a computer and a synoptic board located at the company's headquarters (see Figure II). But other advantages were due to the specific design of TRAME: high data integrity, priority support for packets, and ease of including special protocols such as the many SCADA protocols in use at that time. All of the above resulted in improved quality of service, especially with respect to data availability and data integrity, and in the integration of services in a single network. Part of the evolution of its deployment can be seen in Figures II to IV. === TRAME 2 === In 1990, TRAME 2 was fully deployed and TRAME 1 was replaced. The processor of the new hardware was Intel 80286 and the hardware structure and external appearance of the routers was very similar to that of TRAME 1. The software was written in C and the above-mentioned emulator continued to be used. Improvements over TRAME 1 were the introduction of the standardized X.25 access protocol

  Read more →
• 

  Radical trust

  Radical trust is the confidence that any structured organization, such as a government, library, business, religion, or museum, has in collaboration and empowerment within online communities. Specifically, it pertains to the use of blogs, wiki and online social networking platforms by organizations to cultivate relationships with an online community that then can provide feedback and direction for the organization's interest. The organization 'trusts' and uses that input in its management. One of the first appearances of the notion of radical trust appears in an info graphic outlining the base principles of web 2.0 in Tim O'Reilly's weblog post "What is Web 2.0". Radical Trust is listed as the guiding example of trusting the validity of consumer generated media. This concept is considered to be an underlying assumption of Library 2.0. The adoption of radical trust by a library would require its management let go of some of its control over the library and building an organization without an end result in mind. The direction a library would take would be based on input provided by people through online communities. These changes in the organization may merely be anecdotal in nature, making this method of organization management dramatically distinct from data-based or evidence based management. In marketing, Collin Douma further describes the notion of radical trust as a key mindset required for marketers and advertisers to enter the social media marketing space. Conventional marketing dictates and maintains control of messages to cause the greatest persuasion in consumer decisions, but Douma argued that in the social media space, brands would need to cede that control in order to build brand loyalty.

  Read more →
• 

  Copyright

  A copyright is a type of intellectual property that gives its owner the exclusive legal right to copy, distribute, adapt, display, and perform a creative work, usually for a limited time. The creative work may be in a literary, artistic, educational, or musical form. Copyright is intended to protect the original expression of an idea in the form of a creative work, but not the idea itself. A copyright is subject to limitations based on public interest considerations, such as the fair use doctrine in the United States and fair dealing doctrine in the United Kingdom. Some jurisdictions require "fixing" copyrighted works in a tangible form. It is often shared among multiple authors, each of whom holds a set of rights to use or license the work, and who are commonly referred to as rights holders. These rights normally include reproduction, control over derivative works, distribution, public performance, and moral rights such as attribution. Copyrights can be granted by public law and are in that case considered "territorial rights". This means that copyrights granted by the law of a certain state do not extend beyond the territory of that specific jurisdiction. Copyrights of this type vary by country; many countries, and sometimes a large group of countries, have made agreements with other countries on procedures applicable when works "cross" national borders or national rights are inconsistent. Typically, the public law duration of a copyright expires 50 to 100 years after the creator dies, depending on the jurisdiction. Some countries require certain copyright formalities to establishing copyright, others recognize copyright in any completed work, without a formal registration. When the copyright of a work expires, it enters the public domain. == History == === Background === The concept of copyright developed after the printing press came into use in Europe in the 15th and 16th centuries. It was associated with a common law and rooted in the civil law system. The printing press made it much cheaper to produce works, but as there was initially no copyright law, anyone could buy or rent a press and print any text. Popular new works were immediately re-set and re-published by competitors, so printers needed a constant stream of new material. Fees paid to authors for new works were high and significantly supplemented the incomes of many academics. Printing brought profound social changes. The rise in literacy across Europe led to a dramatic increase in the demand for reading matter. Prices of reprints were low, so publications could be bought by poorer people, creating a mass audience. In German-language markets before the advent of copyright, technical materials, like academic papers and handbooks, were inexpensive and widely available; it has been suggested this contributed to Germany's industrial and economic success. === Conception === The concept of copyright first developed in England. In reaction to the printing of "scandalous books and pamphlets", the English Parliament passed the Licensing of the Press Act 1662, which required all intended publications to be registered with the government-approved Stationers' Company, giving the Stationers the right to regulate what material could be printed. The Statute of Anne, enacted in 1710 in England and Scotland, provided the first legislation to protect copyrights (but not authors' rights). The Copyright Act 1814 extended more rights for authors but did not protect British publications from being reprinted in the US. The Berne International Copyright Convention of 1886 finally provided protection for authors among the countries who signed the agreement, although the US did not join the Berne Convention until 1989. In the US, the Constitution grants Congress the right to establish copyright and patent laws. Shortly after the Constitution was passed, Congress enacted the Copyright Act of 1790, modeling it after the Statute of Anne. While the national law protected authors' published works, authority was granted to the states to protect authors' unpublished works. The most recent major overhaul of copyright in the US, the Copyright Act of 1976, extended federal copyright to works as soon as they are created and "fixed", without requiring publication or registration. State law continues to apply to unpublished works that are not otherwise copyrighted by federal law. This act also changed the calculation of copyright term from a fixed term (then a maximum of fifty-six years) to "life of the author plus 50 years". These changes brought the US closer to conformity with the Berne Convention, and in 1989 the United States further revised its copyright law and joined the Berne Convention officially. Copyright laws allow products of creative human activities, such as literary and artistic production, to be preferentially exploited and thus incentivized. Different cultural attitudes, social organizations, economic models and legal frameworks are seen to account for why copyright emerged in Europe and not, for example, in Asia. In the Middle Ages in Europe, there was generally a lack of any concept of literary property due to the general relations of production, the specific organization of literary production and the role of culture in society. The latter refers to the tendency of oral societies, such as that of Europe in the medieval period, to view knowledge as the product and expression of the collective, rather than to see it as individual property. However, with copyright laws, intellectual production comes to be seen as a product of an individual, with attendant rights. The most significant point is that patent and copyright laws support the expansion of the range of creative human activities that can be commodified. This parallels the ways in which capitalism led to the commodification of many aspects of social life that earlier had no monetary or economic value perse. Copyright has developed into a concept that has a significant effect on nearly every modern industry, including not just literary work, but also forms of creative work such as sound recordings, films, photographs, software, and architecture. === National copyrights === Often seen as the first real copyright law, the 1709 British Statute of Anne gave authors and the publishers to whom they did chose to license their works, the right to publish the author's creations for a fixed period, after which the copyright expired. It was "An Act for the Encouragement of Learning, by Vesting the Copies of Printed Books in the Authors or the Purchasers of such Copies, during the Times therein mentioned." The act also alluded to individual rights of the artist. It began: "Whereas Printers, Booksellers, and other Persons, have of late frequently taken the Liberty of Printing ... Books, and other Writings, without the Consent of the Authors ... to their very great Detriment, and too often to the Ruin of them and their Families:". A right to benefit financially from the work is articulated, and court rulings and legislation have recognized a right to control the work, such as ensuring that the integrity of it is preserved. An irrevocable right to be recognized as the work's creator appears in some countries' copyright laws. The Copyright Clause of the United States, Constitution (1787) authorized copyright legislation: "To promote the Progress of Science and useful Arts, by securing for limited Times to Authors and Inventors the exclusive Right to their respective Writings and Discoveries." That is, by guaranteeing them a period of time in which they alone could profit from their works, they would be enabled and encouraged to invest the time required to create them, and this would be good for society as a whole. A right to profit from the work has been the philosophical underpinning for much legislation extending the duration of copyright, to the life of the creator and beyond, to their heirs. Yet scholars like Lawrence Lessig have argued that copyright terms have been extended beyond the scope imagined by the Framers. Lessig refers to the Copyright Clause as the "Progress Clause" to emphasize the social dimension of intellectual property rights. The original length of copyright in the United States was 14 years, and it had to be explicitly applied for. If the author wished, they could apply for a second 14‑year monopoly grant, but after that the work entered the public domain, so it could be used and built upon by others. === Continental law === In many jurisdictions of the European continent, comparable legal concepts to copyright did exist from the 16th century on but did change under Napoleonic rule into another legal concept: authors' rights or creator's right laws, from French: droits d'auteur and German Urheberrecht. In many modern-day publications the terms copyright and authors' rights are being mixed, or used as translations, but in a juridical sense the legal concepts do essentially differ. Authors' rights are, generally speaking,

  Read more →
• 

  Canva

  Canva Pty Ltd. is an Australian multinational proprietary software company launched in 2013 based in Sydney, Australia. The platform provides a graphic design platform to create visual content for presentations, websites, and other digital products. Its uses include templates for presentations, posters, and social media content, as well as photo and video editing functionality. The platform uses a drag-and-drop interface designed for users without professional design training or experience. Canva operates on a freemium model and has added features such as print services and video editing tools over time. == History == === 2013–2020 === Canva was founded in Perth, Australia, by Melanie Perkins, Cliff Obrecht and Cameron Adams on 1 January 2013. One of the company's early investors was Susan Wu, an American entrepreneur. In its first year, Canva had more than 750,000 users. In 2017, the company reached profitability and had 294,000 paying customers. In January 2018, Perkins announced that the company had raised A$40 million from Sequoia Capital, Blackbird Ventures, and Felicis Ventures, and the company was valued at A$1 billion. It raised A$70 million in May 2019, followed by A$85 million in October 2019 and the launch of Canva for Enterprise. In December 2019, Canva announced Canva for Education, a free product for schools and other educational institutions intended to facilitate collaboration between students and teachers. === 2021–2025 === In June 2020, Canva announced a partnership with FedEx Office and with Office Depot the following month. As of June 2020, Canva's valuation had risen to A$6 billion, rising to A$40 billion by September 2021. In September 2021, Canva raised US$200 million, with its value peaking that year at US$40 billion. By September 2022, the valuation of the company had leveled at US$26 billion. While Canva's value declined from its 2021 peak by mid-2022, it remained one of Australia's most prominent technology companies, alongside Atlassian. In March 2022, Canva had over 75 million monthly active users. In 2023, the pair were named in the Australian Financial Review's AFR Rich List as among the 10 most wealthy people in Australia. On 7 December 2022, Canva launched Magic Write, which is the platform's AI-powered copywriting assistant. On 22 March 2023, Canva announced its new Assistant tool, which makes recommendations on graphics and styles that match the user's existing design. On 11 January 2024, Canva launched its own GPT in OpenAI's GPT Store. The company has announced it intends to compete with Google and Microsoft in the office software category with website and whiteboard products. In May 2024, the company announced the launch of Canva Enterprise, a plan designed for large organisations, alongside new tools including Work Kits, Courses and AI capabilities. In 2024, it announced a co-funded solar energy project to enhance its sustainability efforts. On 10 April 2025, Canva released Visual Suite 2. The new interface combines Canva's design and productivity tools. New features include a spreadsheets application (Canva Sheets), a generative AI coding assistant (Canva Code), a chatbot, and an updated photo editor that can modify or remove background objects. In August 2025, Canva launched a stock sale to employees, valuing the company at US$42 billion. == Acquisitions == In 2018, the company acquired presentations startup Zeetings for an undisclosed amount, as part of its expansion into the presentations space. In May 2019, the company announced the acquisitions of Pixabay and Pexels, two free stock photography sites based in Germany, which enabled Canva users to access their photos for designs. In February 2021, Canva acquired Austrian startup Kaleido.ai and the Czech-based Smartmockups. In 2022, Canva acquired Flourish, a London-based data visualization startup. In March 2024, Canva acquired UK-based Serif, the developers of the Affinity suite of graphic design software, for approximately $380 million. In August 2024, Canva acquired the AI image generation platform and startup, Leonardo AI, for an undisclosed amount. In June 2025, it was announced that Canva had acquired Australian AI marketing startup MagicBrief for an undisclosed amount. In February 2026, Canva acquired two startups: Cavalry, which specializes in animation software, and MangoAI, which focuses on improving advertising performance. In April 2026, Canva acquired Simtheory, an AI Workflow Tool, and Ortto, a marketing automation tool. == Philanthropy == Canva's co-founders, Melanie Perkins and Cliff Obrecht, have publicly stated their intention to donate a significant portion of their personal wealth to charity. In 2021, Canva started a partnership with GiveDirectly, a nonprofit organization operating in low income areas that makes unconditional cash transfers to families living in extreme poverty. Since then, the company has donated $50 million to support GiveDirectly's work across Malawi. In 2025, Canva announced an additional $100 million commitment to expand its GiveDirectly partnership. == Controversies == === Data breach === In May 2019, Canva experienced a data breach in which the data of roughly 139 million users was exposed. The exposed data included real names of users, usernames, email addresses, geographical information, and password hashes for some users. In January 2020, approximately 4 million user passwords were decrypted and shared online. Canva responded by resetting the passwords of every user who had not changed their password since the initial breach. === Russian operations === In May 2022 Canva was criticized for continuing to provide free access to its services in Russia, even after suspending payment processing in the country. Activists from the Ukrainian diaspora in Australia and others said this could be viewed as indirectly supporting Russia’s war effort. They noted the company was the only one of several major Australian firms to receive the lowest “digging in” rating on a tracker run by the Yale School of Management for failing to pull out of Russia. Canva responded that it had suspended financial transactions in Russia from March 2022 and maintained the free version to allow the continued creation and sharing of “pro-peace and anti-war” content for its 1.4 million Russian users.

  Read more →
• 

  Cryptographic bill of materials

  Cryptographic bill of materials (CBOM—also cryptography bill of materials) is a structured inventory of all cryptographic assets present in a software, firmware, device, or system. It enumerates algorithms (and parameters such as key sizes and modes), cryptographic libraries or modules, digital certificates, keys and related material, and protocols in use, and maps their relationships to the components that implement or invoke them. CBOMs are used to improve security analysis, compliance, and cryptographic agility, and are increasingly referenced in guidance for post‑quantum cryptography (PQC) migration. == Definition and scope == A CBOM inventories cryptographic primitives and materials—such as encryption and signature algorithms (with specific variants and modes), key sizes, cryptographic libraries/modules, digital certificates (e.g., X.509), keys and other related cryptographic material, and security protocols (e.g., TLS, IPsec). It also documents dependencies (for example, an application uses an algorithm provided by a library; a protocol uses several algorithms) and can capture certificate lifecycles, cryptographic module certifications (e.g., FIPS 140‑3), and policy conformance metadata. In common practice, a CBOM may be embedded within an SBOM format (such as CycloneDX) or exported as a separate, linked artifact. === Typical CBOM fields === The exact schema varies by implementation, but common fields are summarized below (see CycloneDX CBOM guide and NIST SP 1800‑38B). == Relation to SBOM == A CBOM is complementary to, but distinct from, a software bill of materials (SBOM). Whereas an SBOM lists software components and their versions, a CBOM focuses specifically on the cryptography present and how it is configured and used. For example, an SBOM might enumerate inclusion of a library such as OpenSSL, while the CBOM would identify which algorithms and parameters that library enables (e.g., RSA‑2048, ECDH P‑256, AES‑GCM) and list relevant keys and certificates. The pairing enables both supply‑chain transparency and cryptographic transparency. == History == The term and practice emerged in the early–mid 2020s alongside software‑supply‑chain transparency and PQC planning. The OWASP CycloneDX standard introduced native CBOM support (v1.6 and later), modeling algorithms, keys, certificates, and protocols as first‑class “cryptographic assets” and providing dependency semantics (uses/implements) between software and cryptography. Open tooling from industry and researchers (e.g., IBM's CBOMkit and related generators/viewers) appeared to automate discovery and representation of cryptographic use in the CycloneDX CBOM schema. == Regulatory and policy context == In the United States, policy has emphasized cryptographic inventories as a prerequisite to PQC migration. The White House's National Security Memorandum 10 (2022) directed a government‑wide transition to quantum‑resistant cryptography; the Office of Management and Budget's M‑23‑02 (November 2022) operationalized this by requiring agencies to submit a prioritized inventory of cryptographic systems (with algorithm and key details) by 4 May 2023 and annually thereafter, and tasked CISA/NSA/NIST to develop automated discovery and inventory strategies. A 2024 Office of the National Cyber Director report reiterated that a “comprehensive cryptographic inventory” is the baseline for PQC planning and must be maintained iteratively with both automated and manual discovery. NIST's NCCoE practice guide (SP 1800‑38B, preliminary draft) provides concrete methods for cryptographic discovery and documentation across enterprises, aligning with CBOM‑style representations. CISA later published a strategy to migrate federal agencies to automated cryptography discovery and inventory tools to support continuous reporting. Separately, NSA, CISA, and NIST issued joint guidance encouraging all organisations to prepare cryptographic inventories and roadmaps for PQC, beyond government environments. == Role in quantum readiness and cryptographic agility == Because large‑scale quantum computing threatens widely used public‑key algorithms (e.g., RSA, ECC), organisations are planning multi‑year transitions to post-quantum cryptography. CBOMs enable that planning by identifying where quantum‑vulnerable algorithms appear, prioritising high‑impact systems, and tracking replacements over time. A machine‑readable CBOM also supports cryptographic agility and incident response: if an algorithm, library, or certificate lifecycle becomes non‑compliant or vulnerable, the CBOM indicates which products and systems are affected and where mitigations must be applied first. == Standards and tooling == CycloneDX (OWASP): Native CBOM modelling (v1.6+) for algorithms, certificates, keys/related material, and protocols, with dependency semantics and examples. The project publishes a CBOM guide and use‑case profiles (e.g., certificate and algorithm inventories). NIST NCCoE SP 1800‑38 series: Practice guides for PQC migration include enterprise cryptographic discovery methods that produce CBOM‑like inventories and integrate multiple discovery tools. Government automation initiatives: Following M‑23‑02, CISA issued a strategy to migrate to automated cryptography discovery and inventory tools to support agency reporting and continuous inventory management. Open‑source and vendor tools: IBM's CBOMkit and related components generate, analyse, and visualise CBOMs; the IBM CBOM specification work was upstreamed into CycloneDX 1.6. === Data model and interchange (example) === CycloneDX provides machine‑readable encodings (JSON/XML) for CBOM content. The example below (subset) shows an application depending on a crypto library that provides the AES‑256‑GCM algorithm, and the application also depends on a leaf X.509 certificate. See the CycloneDX CBOM guide, JSON reference, and the “Implementation details” use‑case for the semantics of `dependsOn` and `provides`. == Relationship to cybersecurity supply chain initiatives == CBOMs complement SBOM‑focused supply‑chain transparency introduced by U.S. Executive Order 14028 and NTIA/NIST SBOM work. SBOMs document software components; CBOMs add detail on embedded cryptography to support risk management, policy compliance (e.g., disallowing deprecated algorithms), and PQC transition planning.

  Read more →
• 

  Kurzsignale

  The Short Signal Code, also known as the Short Signal Book (German: Kurzsignalbuch), was a short code system used by the Kriegsmarine (German Navy) during World War II to minimize the transmission duration of messages. == Description == The transmission of radio messages had the potential risks of revealing the submarine's presence and direction; if decoded the content was also revealed. Submarines need to provide information, mostly in standard form (position of convoy to attack and of submarine, weather information), to their bases. Initially Morse code transmissions could be used. To inhibit detection, the duration of messages needed to be minimised; for this, Kurzsignale short-coding was used. To prevent interception, messages needed to be encrypted by the Enigma machine. To shorten transmission even further, the message could be sent by a fast machine instead of a human radio operator. For example, the Kurier system – not implemented in time – decreased the time to send a Morse dot from around 50 milliseconds for a human to 1 millisecond. == Short Signal book == The Kurzsignale code was intended to shorten transmission time to below the time required to get a directional fix. It was not primarily intended to hide signal contents; protection was intended to be achieved by encoding with the Enigma machine. A copy of the Kurzsignale code book was captured from German submarine U-110 on 9 May 1941. In August 1941, Dönitz began addressing U-boats by the names of their commanders, instead of boat numbers. The method of defining U-boat meeting points in the Short Signal Book was regarded as compromised, so a method was defined by B-Dienst cryptanalysts to disguise their positions on the Kriegsmarine German Naval Grid System (German:Gradnetzmeldeverfahren) was introduced and used until the end of the war == Radio direction finding == Aware of the danger presented by radio direction finding (RDF), the Kriegsmarine developed various systems to speed up broadcast. The Kurzsignale code system condensed messages into short codes consisting of short sequences for common terms such as "convoy location" so that additional descriptions would not be needed in the message. The resulting Kurzsignal was then encoded with the Enigma machine and subsequently transmitted as rapidly as possible, typically taking about 20 seconds. Typical length of an information or weather signal was about 25 characters. Conventional RDF needed about a minute to fix the bearing of a radio signal, and the Kurzsignale protected against this. However, the huff-duff system which was in use by the Allies could cope with these short transmissions. The fully automated burst transmission Kurier system, in testing from August 1944, could send a Kurzsignal in not more than 460 milliseconds; this was short enough to prevent location even by huff-duff and, if deployed, would have been a serious setback for Allied anti-submarine and code-breaking activities. By late 1944 the Kurier program was a top priority, but the war ended before the system was operational. == Short Weather cipher == A similar coding system was used for weather reports from U-boats, the Wetterkurzschlüssel (Short Weather Cipher). Code books were captured from U-559 on 30 October 1942.

  Read more →