Autonomous things, abbreviated AuT, or the Internet of autonomous things, abbreviated as IoAT, is an emerging term for the technological developments that are expected to bring computers into the physical environment as autonomous entities without human direction, freely moving and interacting with humans and other objects. Self-navigating drones are the first AuT technology in (limited) deployment. It is expected that the first mass-deployment of AuT technologies will be the autonomous car, generally expected to be available around 2020. Other currently expected AuT technologies include home robotics (e.g., machines that provide care for the elderly, infirm or young), and military robots (air, land or sea autonomous machines with information-collection or target-attack capabilities). AuT technologies share many common traits, which justify the common notation. They are all based on recent breakthroughs in the domains of (deep) machine learning and artificial intelligence. They all require extensive and prompt regulatory developments to specify the requirements from them and to license and manage their deployment (see the further reading below). And they all require unprecedented levels of safety (e.g., automobile safety) and security, to overcome concerns about the potential negative impact of the new technology. As an example, the autonomous car both addresses the main existing safety issues and creates new issues. It is expected to be much safer than existing vehicles, by eliminating the single most dangerous element – the driver. The US's National Highway Traffic Safety Administration estimates 94 percent of US accidents were the result of human error and poor decision-making, including speeding and impaired driving, and the Center for Internet and Society at Stanford Law School claims that "Some ninety percent of motor vehicle crashes are caused at least in part by human error". So while safety standards like the ISO 26262 specify the required safety, there is still a burden on the industry to demonstrate acceptable safety. While car accidents claim every year 35,000 lives in the US, and 1.25 million worldwide, some believe that even "a car that's 10 times as safe, which means 3,500 people die on the roads each year [in the US alone]" would not be accepted by the public. The acceptable level may be closer to the current figures on aviation accidents and incidents, with under a thousand worldwide deaths in most years – three orders of magnitude lower than cars. This underscores the unprecedented nature of the safety requirements that will need to be met for cars, with similar levels of safety expected for other Autonomous Things.
Template matching
Template matching is a technique in digital image processing for finding small parts of an image which match a template image. It can be used for quality control in manufacturing, navigation of mobile robots, or edge detection in images. The main challenges in a template matching task are detection of occlusion, when a sought-after object is partly hidden in an image; detection of non-rigid transformations, when an object is distorted or imaged from different angles; sensitivity to illumination and background changes; background clutter; and scale changes. == Feature-based approach == The feature-based approach to template matching relies on the extraction of image features, such as shapes, textures, and colors, that match the target image or frame. This approach is usually achieved using neural networks and deep-learning classifiers such as VGG, AlexNet, and ResNet.Convolutional neural networks (CNNs), which many modern classifiers are based on, process an image by passing it through different hidden layers, producing a vector at each layer with classification information about the image. These vectors are extracted from the network and used as the features of the image. Feature extraction using deep neural networks, like CNNs, has proven extremely effective has become the standard in state-of-the-art template matching algorithms. This feature-based approach is often more robust than the template-based approach described below. As such, it has become the state-of-the-art method for template matching, as it can match templates with non-rigid and out-of-plane transformations, as well as high background clutter and illumination changes. == Template-based approach == For templates without strong features, or for when the bulk of a template image constitutes the matching image as a whole, a template-based approach may be effective. Since template-based matching may require sampling of a large number of data points, it is often desirable to reduce the number of sampling points by reducing the resolution of search and template images by the same factor before performing the operation on the resultant downsized images. This pre-processing method creates a multi-scale, or pyramid, representation of images, providing a reduced search window of data points within a search image so that the template does not have to be compared with every viable data point. Pyramid representations are a method of dimensionality reduction, a common aim of machine learning on data sets that suffer the curse of dimensionality. == Common challenges == In instances where the template may not provide a direct match, it may be useful to implement eigenspaces to create templates that detail the matching object under a number of different conditions, such as varying perspectives, illuminations, color contrasts, or object poses. For example, if an algorithm is looking for a face, its template eigenspaces may consist of images (i.e., templates) of faces in different positions to the camera, in different lighting conditions, or with different expressions (i.e., poses). It is also possible for a matching image to be obscured or occluded by an object. In these cases, it is unreasonable to provide a multitude of templates to cover each possible occlusion. For example, the search object may be a playing card, and in some of the search images, the card is obscured by the fingers of someone holding the card, or by another card on top of it, or by some other object in front of the camera. In cases where the object is malleable or poseable, motion becomes an additional problem, and problems involving both motion and occlusion become ambiguous. In these cases, one possible solution is to divide the template image into multiple sub-images and perform matching on each subdivision. == Deformable templates in computational anatomy == Template matching is a central tool in computational anatomy (CA). In this field, a deformable template model is used to model the space of human anatomies and their orbits under the group of diffeomorphisms, functions which smoothly deform an object. Template matching arises as an approach to finding the unknown diffeomorphism that acts on a template image to match the target image. Template matching algorithms in CA have come to be called large deformation diffeomorphic metric mappings (LDDMMs). Currently, there are LDDMM template matching algorithms for matching anatomical landmark points, curves, surfaces, volumes. == Template-based matching explained using cross correlation or sum of absolute differences == A basic method of template matching sometimes called "Linear Spatial Filtering" uses an image patch (i.e., the "template image" or "filter mask") tailored to a specific feature of search images to detect. This technique can be easily performed on grey images or edge images, where the additional variable of color is either not present or not relevant. Cross correlation techniques compare the similarities of the search and template images. Their outputs should be highest at places where the image structure matches the template structure, i.e., where large search image values get multiplied by large template image values. This method is normally implemented by first picking out a part of a search image to use as a template. Let S ( x , y ) {\displaystyle S(x,y)} represent the value of a search image pixel, where ( x , y ) {\displaystyle (x,y)} represents the coordinates of the pixel in the search image. For simplicity, assume pixel values are scalar, as in a greyscale image. Similarly, let T ( x t , y t ) {\textstyle T(x_{t},y_{t})} represent the value of a template pixel, where ( x t , y t ) {\textstyle (x_{t},y_{t})} represents the coordinates of the pixel in the template image. To apply the filter, simply move the center (or origin) of the template image over each point in the search image and calculate the sum of products, similar to a dot product, between the pixel values in the search and template images over the whole area spanned by the template. More formally, if ( 0 , 0 ) {\displaystyle (0,0)} is the center (or origin) of the template image, then the cross correlation T ⋆ S {\displaystyle T\star S} at each point ( x , y ) {\displaystyle (x,y)} in the search image can be computed as: ( T ⋆ S ) ( x , y ) = ∑ ( x t , y t ) ∈ T T ( x t , y t ) ⋅ S ( x t + x , y t + y ) {\displaystyle (T\star S)(x,y)=\sum _{(x_{t},y_{t})\in T}T(x_{t},y_{t})\cdot S(x_{t}+x,y_{t}+y)} For convenience, T {\displaystyle T} denotes both the pixel values of the template image as well as its domain, the bounds of the template. Note that all possible positions of the template with respect to the search image are considered. Since cross correlation values are greatest when the values of the search and template pixels align, the best matching position ( x m , y m ) {\displaystyle (x_{m},y_{m})} corresponds to the maximum value of T ⋆ S {\displaystyle T\star S} over S {\displaystyle S} . Another way to handle translation problems on images using template matching is to compare the intensities of the pixels, using the sum of absolute differences (SAD) measure. To formulate this, let I S ( x s , y s ) {\displaystyle I_{S}(x_{s},y_{s})} and I T ( x t , y t ) {\displaystyle I_{T}(x_{t},y_{t})} denote the light intensity of pixels in the search and template images with coordinates ( x s , y s ) {\displaystyle (x_{s},y_{s})} and ( x t , y t ) {\displaystyle (x_{t},y_{t})} , respectively. Then by moving the center (or origin) of the template to a point ( x , y ) {\displaystyle (x,y)} in the search image, as before, the sum of absolute differences between the template and search pixel intensities at that point is: S A D ( x , y ) = ∑ ( x t , y t ) ∈ T | I T ( x t , y t ) − I S ( x t + x , y t + y ) | {\displaystyle SAD(x,y)=\sum _{(x_{t},y_{t})\in T}\left\vert I_{T}(x_{t},y_{t})-I_{S}(x_{t}+x,y_{t}+y)\right\vert } With this measure, the lowest SAD gives the best position for the template, rather than the greatest as with cross correlation. SAD tends to be relatively simple to implement and understand, but it also tends to be relatively slow to execute. A simple C++ implementation of SAD template matching is given below. == Implementation == In this simple implementation, it is assumed that the above described method is applied on grey images: This is why Grey is used as pixel intensity. The final position in this implementation gives the top left location for where the template image best matches the search image. One way to perform template matching on color images is to decompose the pixels into their color components and measure the quality of match between the color template and search image using the sum of the SAD computed for each color separately. == Speeding up the process == In the past, this type of spatial filtering was normally only used in dedicated hardware solutions because of the computational complexity of the operation, however we can lessen this complexity b
Frame (networking)
A frame is a digital data transmission unit in computer networking and telecommunications. In packet switched systems, a frame is a simple container for a single network packet. In other telecommunications systems, a frame is a repeating structure supporting time-division multiplexing. A frame typically includes frame synchronization features consisting of a sequence of bits or symbols that indicate to the receiver the beginning and end of the payload data within the stream of symbols or bits it receives. If a receiver is connected to the system during frame transmission, it ignores the data until it detects a new frame synchronization sequence. == Packet switching == In the OSI model of computer networking, a frame is the protocol data unit at the data link layer. Frames are the result of the final layer of encapsulation before the data is transmitted over the physical layer. A frame is "the unit of transmission in a link layer protocol, and consists of a link layer header followed by a packet." Each frame is separated from the next by an interframe gap. A frame is a series of bits generally composed of frame synchronization bits, the packet payload, and a frame check sequence. Examples are Ethernet frames, Wi-Fi frames, 4G frames, Point-to-Point Protocol (PPP) frames, Fibre Channel frames, and V.42 modem frames. Often, frames of several different sizes are nested inside each other. For example, when using Point-to-Point Protocol (PPP) over asynchronous serial communication, the eight bits of each individual byte are framed by start and stop bits, the payload data bytes in a network packet are framed by the header and footer, and several packets can be framed with frame boundary octets. == Time-division multiplex == In telecommunications, specifically in time-division multiplex (TDM) and time-division multiple access (TDMA) variants, a frame is a cyclically repeated data block that consists of a fixed number of time slots, one for each logical TDM channel or TDMA transmitter. In this context, a frame is typically an entity at the physical layer. TDM application examples are SONET/SDH and the ISDN circuit-switched B-channel, while TDMA examples are Circuit Switched Data used in early cellular voice services. The frame is also an entity for time-division duplex, where the mobile terminal may transmit during some time slots and receive during others.
Social recruiting
Social recruiting (social hiring or social media recruitment) is recruiting candidates by using social platforms as talent databases or for advertising. Social recruiting uses social media profiles, blogs, and other Internet sites to find information on candidates. It also uses social media to advertise jobs either through HR vendors or through crowdsourcing where job seekers and others share job openings within their online social networks. Social recruiting's effectiveness and return on investment have been difficult to determine, since applicants do not usually apply through the social channels which first attracted them. In May 2013, Maximum Employment Marketing Group released the Social Recruitment Monitor, which ranks the reach, engagement, and interactivity of employers' social recruiting efforts around the world. == Social recruitment software == The social recruitment software market (a form of e-recruitment) is often included in the wider talent management software sector. Bersin & Associates valued the wider talent management market at over $2bn in 2007. Social recruitment increasingly sits at an intersection of a number of fast-moving areas including social networking, recruitment and now cloud computing. Additionally, mobile recruiting has become another hot topic, especially with the rise in tablet and smartphone usage. In 2012, there was a rise of tech companies using social recruiting applications to find and screen applicants. As more companies saw value in filling jobs by putting them on the social platforms where millions of people spend at least 37 minutes daily, there developed a much larger focus on social recruiting among the talent acquisition community. By mid-2013, many major enterprise companies such as Pepsi, Gap, AIG, and Oracle had begun effectively utilizing social recruiting software, making it clear that large corporations were open to automating or streamlining (and ultimately investing in) their social recruiting processes.
Data philanthropy
Data philanthropy refers to the practice of private companies donating corporate data. This data is usually donated to nonprofits or donation-run organizations that have difficulty keeping up with expensive data collection technology. The concept was introduced through the United Nations Global Pulse initiative in 2011 to explore corporate data assets for humanitarian, academic, and societal causes. For example, anonymized mobile data could be used to track disease outbreaks, or data on consumer actions may be shared with researchers to study public health and economic trends. == Definition == A large portion of data collected from the internet consists of user-generated content, such as blogs, social media posts, and information submitted through lead generation and data forms. Additionally, corporations gather and analyze consumer data to gain insight into customer behavior, identify potential markets, and inform investment decisions. United Nations Global Pulse director Robert Kirkpatrick has referred to this type of data as "massive passive data" or "data exhaust." == Challenges == While data philanthropy can enhance development policies, making users' private data available to various organizations raises concerns regarding privacy, ownership, and the equitable use of data. Different techniques, such as differential privacy and alphanumeric strings of information, can allow access to personal data while ensuring user anonymity. However, even if these algorithms work, re-identification may still be possible. Another challenge is convincing corporations to share their data. The data collected by corporations provides them with market competitiveness and insight regarding consumer behavior. Corporations may fear losing their competitive edge if they share the information they have collected with the public. Numerous moral challenges are also encountered. In 2016, Mariarosaria Taddeo, a digital ethics professor at the University of Oxford, proposed an ethical framework to address them. == Sharing strategies == The goal of data philanthropy is to create a global data commons where companies, governments, and individuals can contribute anonymous, aggregated datasets. The United Nations Global Pulse offers four different tactics that companies can use to share their data that preserve consumer anonymity: Share aggregated and derived data sets for analysis under nondisclosure agreements (NDA) Allow researchers to analyze data within the private company's own network under NDAs Real-Time Data Commons: data pooled and aggregated among multiple companies of the same industry to protect competitiveness Public/Private Alerting Network: companies mine data behind their own firewalls and share indicators == Application in various fields == Many corporations take part in data philanthropy, including social networking platforms (e.g., Facebook, Twitter), telecommunications providers (e.g., Verizon, AT&T), and search engines (e.g., Google, Bing). Collecting and sharing anonymized, aggregated user-generated data is made available through data-sharing systems to support research, policy development, and social impact initiatives. By participating in such efforts, these organizations contribute to causes regarded as beneficial to society, allowing institutions to give back meaningfully. With the onset of technological advancements, the sharing of data on a global scale and an in-depth analysis of these data structures could mitigate the effects of global issues such as natural disasters and epidemics. Robert Kirkpatrick, the Director of the United Nations Global Pulse, has argued that this aggregated information is beneficial for the common good and can lead to developments in research and data production in a range of varied fields. === Digital disease detection === Health researchers use digital disease detection by collecting data from various sources—such as social media platforms (e.g., Twitter, Facebook), mobile devices (e.g., cell phones, smartphones), online search queries, mobile apps, and sensor data from wearables and environmental sensors—to monitor and predict the spread of infectious diseases. This approach allows them to track and anticipate outbreaks of epidemics (e.g., COVID-19, Ebola), pandemics, vector-borne diseases (e.g., malaria, dengue fever), and respiratory illnesses (e.g., influenza, SARS), improving response and intervention strategies for the spread of diseases. In 2008, Centers for Disease Control and Prevention collaborated with Google and launched Google Flu Trends, a website that tracked flu-related searches and user locations to track the spread of the flu. Users could visit Google Flu Trends to compare the amount of flu-related search activity versus the reported numbers of flu outbreaks on a graphical map. One drawback of this method of tracking was that Google searches are sometimes performed due to curiosity rather than when an individual is suffering from the flu. According to Ashley Fowlkes, an epidemiologist in the CDC Influenza division, "The Google Flu Trends system tries to account for that type of media bias by modeling search terms over time to see which ones remain stable." Google Flu Trends is no longer publishing current flu estimates on the public website; however, visitors to the site can still view and download previous estimates. Current data can be shared with verified researchers. A study from the Harvard School of Public Health (HSPH), published in the October 12, 2012 issue of Science, discussed how phone data helped curb the spread of malaria in Kenya. The researchers mapped phone calls and texts made by 14,816,521 Kenyan mobile phone subscribers. When individuals left their primary living location, the destination and length of journey were calculated. This data was then compared to a 2009 malaria prevalence map to estimate the disease's commonality in each location. Combining all this information, the researchers could estimate the probability of an individual carrying malaria and map the movement of the disease. This research can be used to track the spread of similar diseases. === Humanitarian aid === Calling patterns of mobile phone users can determine the socioeconomic standings of the populace, which can be used to deduce "its access to housing, education, healthcare, and basic services such as water and electricity." Researchers from Columbia University and Karolinska Institute used daily SIM card location data from both before and after the 2010 Haiti earthquake to estimate the movement of people both in response to the earthquake and during the related 2010 Haiti cholera outbreak. Their research suggests that mobile phone data can provide rapid and accurate estimates of population movements during disasters and outbreaks of infectious disease. Big data can also provide information on looming disasters and can assist relief organizations in rapid-response and locating displaced individuals. By analyzing specific patterns within this 'big data', governments and NGOs can enhance responses to disruptive events such as natural disasters, disease outbreaks, and global economic crises. Leveraging real-time information enables a deeper understanding of individual well-being, allowing for more effective interventions. Corporations utilize digital services, such as human sensor systems, to detect and solve impending problems within communities. This is a strategy used by the private sector to anonymously share customer information for public benefit, while preserving user privacy. === Impoverished areas === Poverty still remains a worldwide issue, with over 2.5 billion people currently impoverished. Statistics indicate the widespread use of mobile phones, even within impoverished communities. Additional data can be collected through Internet access, social media, utility payments and governmental statistics. Data-driven activities can lead to the accumulation of 'big data', which in turn can assist international non-governmental organizations in documenting and evaluating the needs of underprivileged populations. Through data philanthropy, NGOs can distribute information while cooperating with governments and private companies. === Corporate === Data philanthropy incorporates aspects of social philanthropy by allowing corporations to create profound impacts through the act of giving back by dispersing proprietary datasets. The public sector collects and preserves information, considered an essential asset. Companies track and analyze users' online activities to gain insight into their needs related to new products and services. These companies view the welfare of the population as key to business expansion and progression by using their data to highlight global citizens' issues. Experts in the private sector emphasize the importance of integrating diverse data sources—such as retail, mobile, and social media data—to develop essential solutions for global challenges. In Data Philanthropy:
EXAPT
EXAPT (a portmanteau of "Extended Subset of APT") is a production-oriented programming language that allows users to generate NC programs with control information for machining tools and facilitates decision-making for production-related issues that may arise during various machining processes. EXAPT was first developed to address industrial requirements. Through the years, the company created additional software for the manufacturing industry. Today, EXAPT offers a suite of SAAS products and services for the manufacturing industry. The trade name, EXAPT, is most commonly associated with the CAD/CAM-System, production data, and tool management software of the German company EXAPT Systemtechnik GmbH based in Aachen, DE. == General == EXAPT is a modularly built programming system for all NC machining operations as Drilling Turning Milling Turn-Milling Nibbling Flame-, laser-, plasma- and water jet cutting Wire eroding Operations with industrial robots Due to the modular structure, the main product groups, EXAPTcam and EXAPTpdo, are gradually expandable and permit individual software for the manufacturing industry used individually and also in a compound with an existing IT environment. == Functionality == EXAPTcam meets the requirements for NC planning, especially for the cutting operations such as turning, drilling, and milling up to 5-axis simultaneous machining. Thereby new process technologies, tool, and machine concepts are constantly involved. In the NC programming data from different sources such as 3D CAD models, drawings or tables can flow in. The possibilities of NC programming reaches from language-oriented to feature-oriented NC programming. The integrated EXAPT knowledge database and intelligent and scalable automatisms support the user. The EXAPT NC planning also covers the generation of production information as clamping and tool plans, presetting data or time calculations. The realistic simulation possibilities of NC planning and NC control data provide with production reliability. EXAPTpdo (EXAPT ProductionsDataOrganization) provides a neutrally applicable technology platform for the information compound of the NC planning - to the shop floor. This applies to all NC production data that are necessary for the set-up of NC machines, for the provision, presetting, and stocking of manufacturing resources and provided by EXAPTpdo in a central database. Besides classical functions of the tool management system (TMS) as the management of cutting tools, measuring, testing and clamping devices the technology data management and tool lifecycle management (TLM) is also included. System-supported "where-used lists" helps to handle the manufacturing resource cycle by secured requirement determination and requirement fulfillment. Unnecessary transports and unplanned dispositive adjustments are dropped, stocks are reduced, set-up times reduced and the throughput is increased. EXAPTpdo synchronizes involved systems within the value chain. Stock systems, MES systems or ERP systems (e.g. from the purchasing or production areas) do not work in isolation from each other but they interact with each other. EXAPTpdo provides the base to Smart Factory, for more flexibility in production and faster communication. == History == With the foundation of the EXAPT-Verein in 1967 as spin-off of the universities Aachen, Berlin and Stuttgart the further development "EXAPT (EXtended Subset of APT)" of the programming language "APT (Automatically Programmed Tool)" was focused and so the first milestone for the EXAPT history was set. In the same year the system EXAPT 1 for drilling and simple milling tasks became available. 1969 The industrial application of EXAPT 2 for the programming of NC machines with 2-axis linear and path control begins. In the following year, the development of the EXAPT modular system starts. 1972 BASIC-EXAPT is provided for the universal, homogeneous programming of all NC tasks. The support is made by the EXAPT applications consultancy. 1973 EXAPT 1.1 is provided for the programming of straight-cut and continuous-path controlled drilling and milling machines and machining centers. At the Hanover Fair (IHA 73) the interactive access to a mainframe via a time-sharing terminal for the part program entry and correction is presented and starts the replacement of the punch card. 1974 The possibilities for the use of process computers for the NC data transfer are leveled out. EXAPT offers the possibility of the result simulation when using plotters with display of tool paths and tools in assignment to the workpiece. In April 1975, the EXAPT NC Systemtechnik GmbH was founded with the aim, of enabling entry into the NC technique for small and medium-sized companies by a complete product and service program. In the following year, the system portfolio is extended with further system modules and service programs and the provision of postprocessors. 1978 The development activities on the EXAPT module system started in 1970 are completed. Using modern software techniques, the different system parts BASIC-EXAPT, EXAPT 1, EXAPT 1.1, and EXAPT 2 are composed of a total system. System support and applications consultancy become a new working focus. From the beginning to the middle of the 1980s Beside new portable software modules for CAD/CAM applications (e. g. CAPEX, NESTEX, CADEX, CADCPL), the first version of the EXAPT DNC system and extensions of the EXAPT NC programming system for the machining of sculptured surfaces are presented. 1988 EXAPT expands the software product range by systems for tool data management (BMO) and production data management (FDO). EXAPT trains more than 1,300 course participants including company-specific courses. 1992 The first version of the completely new product generation EXAPTplus is presented and the agency in Dresden is opened. 1993 The company name "EXAPT NC Systemtechnik GmbH" is changed to "EXAPT Systemtechnik GmbH." EXAPTplus is presented on PC under Windows NT at the EMO '93. The decentralization of the use of EXAPT systems expands the range of applications. In the following year, EXAPT-DNC is executable under Windows on a customary PC. Special hardware is not needed and so it can be used in compound with the database-supported EXAPT production data management system (FDO). 1995 EXAPTplus is also ready for complex application cases such as machining of tubes at extrusion tools. EXAPT-CADI provides the transfer of 2D CAD data to EXAPTplus. With the new office Gießen the marketing is strengthened. In the following year the EXAPT NC editor is developed for the direct processing of NC control data with tool path display and visualization of the tools. In the course of the market entry of more comfortable 3D CAD systems for the solid modelling of components a detailed evaluation of current systems is made in 1997. It is decided to use SolidWorks as a reference system for the solid-oriented NC planning with EXAPT. 1998 The first solution for the transfer of geometry data between SolidWorks and EXAPTplus is generated. The EXAPT organization systems are (beside SQL) also executable under Oracle now. The use of client server solutions supports the data flow in the production. 1999 AFR functions are provided in connection with EXAPTsolid to support a workpiece modelling for NC. The millennium capability is ensured for all EXAPT systems. AFR is a ground-breaking for the integration of third-party products. 2002 EXAPT-BMG is developed for the generation and visualization of tools with additional functions for the assembly from components. The acquisition of tools with their geometric and technological presentation offers extensive support of the NC planning with EXAPT systems. 2003 EXAPTpdo is available to optimize the process chains in production planning and production execution optimally regarding the increasing requirements of changing production conditions. 2004 Diverse system extensions are made in EXAPTplus, EXAPTsolid, EXAPT NC editor, EXAPTpdo for the complete machining on turning/milling centres with result reliability because of more extensive simulation based on realNC (Tecnomatix), for the use of new complex tool systems and the compound use between ERP systems as SAP and intelligent CNC systems. In the following year, EXAPTpdo is extended for the cross-order set-up optimization and provision of manufacturing re-sources especially for single and small series production with connection to purchase and physical portfolio management. 2006 The EXAPT systems are available for extended use as an information platform for production, the time management, and similar requirements. EXAPTsolid is extended for the feature-oriented milling operation and machine simulation. The NC programming of complex machine tools, e.g. three-turret-turning/milling centers is supported by EXAPT systems, as well as the use of multi-functional tools. 2007 A module for 3-5-axis simultaneous milling machining is presented.
Conjugate coding
Conjugate coding is a cryptographic tool, introduced by Stephen Wiesner in the late 1960s. It is part of the two applications Wiesner described for quantum coding, along with a method for creating fraud-proof banking notes. The application that the concept was based on was a method of transmitting multiple messages in such a way that reading one destroys the others. This is called quantum multiplexing and it uses photons polarized in conjugate bases as "qubits" to pass information. Conjugate coding also is a simple extension of a random number generator. At the behest of Charles Bennett, Wiesner published the manuscript explaining the basic idea of conjugate coding with a number of examples but it was not embraced because it was significantly ahead of its time. Because its publication has been rejected, it was developed to the world of public-key cryptography in the 1980s as oblivious transfer, first by Michael Rabin and then by Shimon Even. It is used in the field of quantum computing. The initial concept of quantum cryptography developed by Bennett and Gilles Brassard was also based on this concept.