AI Image Generators

Explore the best AI Image Generators — independent reviews, comparisons, pricing and step-by-step how-to guides, curated by Aizhi.

  • Inverse consistency

    Inverse consistency

    In image registration, inverse consistency measures the consistency of mappings between images produced by a registration algorithm. The inverse consistency error, introduced by Christiansen and Johnson in 2001, quantifies the distance between the composition of the mappings from each image to the other, produced by the registration procedure, and the identity function, and is used as a regularisation constraint in the loss function of many registration algorithms to enforce consistent mappings. Inverse consistency is necessary for good image registration but it is not sufficient, since a mapping can be perfectly consistent but not register the images at all. == Definition == Image registration is the process of establishing a common coordinate system between two images, and given two images I 1 : Ω 1 → R I 2 : Ω 2 → R {\displaystyle {\begin{aligned}I_{1}:\Omega _{1}\to \mathbb {R} \\I_{2}:\Omega _{2}\to \mathbb {R} \end{aligned}}} registering a source image I 1 {\displaystyle I_{1}} to a target image I 2 {\displaystyle I_{2}} consists of determining a transformation f 1 : Ω 2 → Ω 1 {\displaystyle f_{1}:\Omega _{2}\to \Omega _{1}} that maps points from the target space to the source space. An ideal registration algorithm should not be sensitive to which image in the pair is used as source or target, and the registration operator should be antisymmetric such that the mappings f 1 : Ω 2 → Ω 1 f 2 : Ω 1 → Ω 2 {\displaystyle {\begin{aligned}f_{1}:\Omega _{2}\to \Omega _{1}\\f_{2}:\Omega _{1}\to \Omega _{2}\end{aligned}}} produced when registering I 1 {\displaystyle I_{1}} to I 2 {\displaystyle I_{2}} and I 2 {\displaystyle I_{2}} to I 1 {\displaystyle I_{1}} respectively should be the inverse of each other, i.e. f 2 = f 1 − 1 {\displaystyle f_{2}=f_{1}^{-1}} and f 1 = f 2 − 1 {\displaystyle f_{1}=f_{2}^{-1}} or, equivalently, f 2 ∘ f 1 = id Ω 2 {\displaystyle f_{2}\circ f_{1}=\operatorname {id} _{\Omega _{2}}} and f 1 ∘ f 2 = id Ω 1 {\displaystyle f_{1}\circ f_{2}=\operatorname {id} _{\Omega _{1}}} , where ∘ {\displaystyle \circ } denotes the function composition operator. Real algorithms are not perfect, and when swapping the role of source and target image in a registration problem the so obtained transformations are not the inverse of each other. Inverse consistency can be enforced by adding to the loss function of the registration a symmetric regularisation term that penalises inconsistent transformations ∫ Ω 2 ‖ f 2 ( f 1 ( x ) ) − x ‖ 2 d x + ∫ Ω 1 ‖ f 1 ( f 2 ( x ) ) − x ‖ 2 d x . {\displaystyle \int _{\Omega _{2}}\left\Vert f_{2}(f_{1}(x))-x\right\Vert ^{2}\mathrm {d} x+\int _{\Omega _{1}}\left\Vert f_{1}(f_{2}(x))-x\right\Vert ^{2}\mathrm {d} x.} Inverse consistency can be used as a quality metric to evaluate image registration results. The inverse consistency error ( I C E {\displaystyle ICE} ) measures the distance between the composition of the two transforms and the identity function, and it can be formulated in terms of both average ( I C E a {\displaystyle ICE_{a}} ) or maximum ( I C E m {\displaystyle ICE_{m}} ) over a region of interest Ω {\displaystyle \Omega } of the image: I C E a = 1 ∫ Ω d x ∫ Ω ‖ f 2 ( f 1 ( x ) ) − x ‖ d x I C E m = max x ∈ Ω ‖ f 2 ( f 1 ( x ) ) − x ‖ . {\displaystyle {\begin{aligned}ICE_{a}&={\frac {1}{\int _{\Omega }\mathrm {d} x}}\int _{\Omega }\left\Vert f_{2}(f_{1}(x))-x\right\Vert \mathrm {d} x\\ICE_{m}&=\max _{x\in \Omega }\left\Vert f_{2}(f_{1}(x))-x\right\Vert .\end{aligned}}} While inverse consistency is a necessary property of good registration algorithms, inverse consistency error alone is not a sufficient metric to evaluate the quality of image registration results, since a perfectly consistent mapping, with no other constraint, may be not even close to correctly register a pair of images.

    Read more →
  • CloudMinds

    CloudMinds

    CloudMinds is an operator of cloud-based systems for cognitive robotics. == History == CloudMinds was founded in 2015 and is backed by SoftBank, Foxconn, Walden Venture Investments, and Keytone Ventures. CloudMinds has developed research in smart devices, robot control, high-speed security networks, and cloud intelligence integration. CloudMinds developed the Mobile Intranet Cloud Services (MCS) based on these technologies in order to increase the information security of the cloud robot remote control. The technology has been applied in the fields of finance, medicine, the military, public safety, and large-scale manufacturing. == U.S. sanctions == In May 2020, CloudMinds was added to the Bureau of Industry and Security's Entity List due to U.S. national security concerns.

    Read more →
  • I-MSCP

    I-MSCP

    i-MSCP (internet Multi Server Control Panel) was a free and open-source software for shared hosting environments management on Linux servers. It comes with a large choice of modules for various services such as Apache2, ProFTPd, Dovecot, Courier, Bind9, and can be easily extended through plugins, or listener files using its events-based API. Latest stable is the 1.5.3 version (build 2018120800) which has been released on 8 December 2018. The i-MSCP is no longer under development, although the developer has repeatedly claimed to be working on a new version, which has never has been published or even shown in any possible way. Whether development occurs or not, the current version of the software is not installable, as it only supports outdated versions of systems for which some of the necessary software to install i-MSCP cannot be installed. == Licensing == i-MSCP has a dual license. A part of the base code is licensed under the Mozilla Public License. All new code, and submissions to i-MSCP are licensed under the GNU Lesser General Public License Version 2.1 (LGPLv2). To solve this license conflict there is work on a complete rewrite for a completely LGPLv2 licensed i-MSCP. == Features == === Supported Linux Distributions === Debian Jessie (8.x), Stretch (9.x), Buster (10.x) Devuan Jessie (1.0), ASCII (2.x) Ubuntu Trusty Thar (14.04 LTS), Bionic Beaver (18.04 LTS) === Supported Daemons / Services === Web server: Apache (ITK, Fcgid and FastCGI/PHP-FPM), Nginx Name server: Bind9 MTA (Mail Transport Agent): Postfix MDA (Mail Delivery Agent): Courier, Dovecot Database: MySQL, MariaDB, Percona FTP-Server: ProFTPD, vsftpd Web statistics: AWStats === Addons === PhpMyAdmin Pydio, formerly AjaXplorer Net2ftp Roundcube Rainloop == Competing software == cPanel DTC Froxlor ISPConfig ispCP OpenPanel hestiacp Plesk SysCP Virtualmin

    Read more →
  • Tute Genomics

    Tute Genomics

    Tute Genomics was an American genomics startup that provided a cloud-based web application for rapid and accurate annotation of human genomic data. It was built on the expertise of ANNOVAR. Tute Genomics assisted researchers in identifying disease genes and biomarkers, and assisted clinicians/labs in performing genetic diagnosis. Based in Provo, Utah, Tute was co-founded by Dr. Kai Wang, an assistant professor at the University of Southern California (USC); and Dr. Reid J. Robison, a board-certified psychiatrist with fellowship training in both neurodevelopmental genetics and bioinformatics. Tute Genomics was acquired by PierianDX in 2016. == History == The word "tute" means "personal" in the Na’vi language created for the 2009 film Avatar by Paul Frommer, a linguist and communications professor at the USC Marshall School of Business. === Timeline === 2013 Tute Genomics launched in 2013 and entered the accelerator, BoomStartup. By "demo day" of BoomStartup, Tute had raised their seed round of funding and expanded the round to include angel investors from SLC Angels, Park City Angels, Life Science Angels. Tute was the tenth ever online syndicate for AngelList and in all raised a seed round of $1.5 million. 2014 In March 2014, the company announced that Affiliated Genetics, a Utah-based CLIA-certified laboratory, selected Tute Genomics for its next-generation sequencing (NGS) analytics pipeline. In May 2014, the company announced joining the Global Alliance for Genomics and Health. In June 2014, Advanced Biological Laboratories (ABL), S.A., announced a licensing and collaboration agreement with Tute Genomics and the commercial launch of OncoChek for managing and analysing genomics data in the field of oncology. In July 2014, the company announced an agreement with Lineagen, Inc., to provide next-generation sequencing analytics for Lineagen’s NextStepDx Plus assay. Also, Brigham Young University selected the Tute Genomics genome annotation and discovery platform for analysis and interpretation of 1,000 exomes and genomes. In November 2014, the company announced addition of the Tute platform to Illumina’s BaseSpace. The company announced a Series A1 funding round of $2.3 million in December 2014. The round was led by UK-based Eurovestech. Peak Ventures and a number of angel investors also participated in this round. 2015 Tute recruits David Mittelman, founder of Arpeggi, Inc. and former CSO at FamilyTreeDNA, to Tute Genomics as Chief Scientific Officer. Tute acquires Knome and integrates the KnoSys platform into its software product. 2016 Reid Robison, Tute CEO, launches a Kickstarter campaign to sell Tute interpreted whole genome and whole exome sequencing directly to consumers. The campaign was suspended within the same month after receiving a letter from the United States Food and Drug Administration. Tute is acquired by PierianDX.

    Read more →
  • Backend as a service

    Backend as a service

    Backend as a service (BaaS), sometimes also referred to as mobile backend as a service (MBaaS), is a service for providing web app and mobile app developers with a way to easily build a backend to their frontend applications. Features available include user management, push notifications, and integration with social networking services. These services are provided via the use of custom software development kits (SDKs) and application programming interfaces (APIs). BaaS is a relatively recent development in cloud computing, with most BaaS startups dating from 2011 or later. Some of the most popular service providers are AWS Amplify and Firebase. == Purpose == Web and mobile apps require a similar set of features on the backend, including notification service, integration with social networks, and cloud storage. Each of these services has its own API that must be individually incorporated into an app, a process that can be time-consuming and complicated for app developers. BaaS providers form a bridge between the frontend of an application and various cloud-based backends via a unified API and SDK. Providing a consistent way to manage backend data means that developers do not need to redevelop their own backend for each of the services that their apps need to access, potentially saving both time and money. Although similar to other cloud-computing business models, such as serverless computing, software as a service (SaaS), infrastructure as a service (IaaS), and platform as a service (PaaS), BaaS is distinct from these other services in that it specifically addresses the cloud-computing needs of web and mobile app developers by providing a unified means of connecting their apps to cloud services. == Features == BaaS providers offer different set of features and backend tools. Some of the most common features include: Database management. Most BaaS solutions provide SQL and/or NoSQL database management services for applications. Developers can store their app data without deploying and managing databases themselves. BaaS usually provides client SDKs, REST and GraphQL APIs for the frontend to interact with databases. File storage. BaaS providers often offer storage solutions for media files, user uploads, and other binary data. Applications can upload, download, and delete files through provided SDKs and APIs. Authentication and authorization. Some BaaS offer authentication and authorization services that allow developers to easily manage app users. This includes user sign-up, login, password reset, social media login integration through OAuth, user group and permission management etc. Notification service. Some BaaS providers such as Firebase and AWS Amplify have notification services that can send custom emails to users and push native notifications on mobile platforms. This is especially useful for applications that need to send messages, alerts, and reminders. Cloud functions. Some BaaS allow developers to deploy and run serverless functions. The functions are usually stateless and can be triggered by various ways including HTTP requests, SDK invocation, background server events, and cloud scheduled executions. Different providers offer runtime support for different languages, some of the popular languages are JavaScript/TypeScript (Node.js, Deno), Python, Java/Kotlin. Cloud functions extend the potential and flexibility of BaaS by allowing developers to write custom functionalities for their apps, working in a way similar to a traditional REST API backend framework. Usage analytics. Analytics data about application usage is often included in BaaS. This allows developers to monitor user behaviors and make decisions correspondingly in marketing strategies and performance optimizations. UI design. Some BaaS providers, such as AWS Amplify and Backendless, offer user interface designing tools that help developers design the frontend UI of web and mobile apps. While this may be useful for small teams and individual developers, UI design assistance may not be conventional in BaaS as it goes beyond the scope of backend infrastructure. Real-Time. Real-time features in a BaaS platform ensure that data updates and synchronizations occur instantly across all clients, making changes immediately visible to users. This is crucial for applications like live chat and collaborative tools, using technologies like WebSockets to maintain continuous server-client connections. == Service providers == BaaS providers have a broad focus, providing SDKs and APIs that work for app development on multiple platforms with different technology stacks, such as JavaScript (for Web apps), Flutter, Java/Kotlin (for Android apps), Swift/Objective-C (for iOS/MacOS/WatchOS/TvOS apps), .NET (for Windows) and others. BaaS providers also come in different types, suiting developers of different needs. === Cloud-based BaaS === Most BaaS providers host backend platforms on their cloud servers. They also manage the infrastructure, security, and scalability of the platforms. Developers can access the backend services via a web interface or the provided APIs. Some examples of cloud-based BaaS include Firebase (hosted on Google Cloud Platform), AWS Amplify (hosted on Amazon Web Services), and Microsoft Azure Mobile Apps (hosted on Microsoft Azure). === Self-hosted BaaS === Self-hosted BaaS allow developers to host backend on their own servers, providing more flexibility and potential to customization compared to cloud-based BaaS, which often is more difficult to migrate from. However, developers are also in charge of managing the infrastructure, security, and scalability of their servers. === Mobile BaaS === Mobile backend as a service (MBaaS) is a type of BaaS specifically for applications deployed in mobile systems. While some references use MBaaS interchangeably for BaaS, BaaS can have a wider variety of support such as for web apps and desktop apps. == Business model == BaaS providers generate revenue from their services in various ways, often using a freemium model. Under this model, a client receives a certain number of free active users or API calls per month, and pays a fee for each user or call over this limit. Alternatively, clients can pay a set fee for a package which allows for a greater number of calls or active users per month. There are also flat fee plans that make the pricing more predictable. Some of the providers offer the unlimited API calls inside their free plan offerings. Another business model that has been used by a lot of BaaS providers is PAYG (pay as you go), which has a flexible cost based on developers' usage of database, storage, bandwidth, function calls, user numbers etc.

    Read more →
  • PerfKitBenchmarker

    PerfKitBenchmarker

    PerfKit Benchmarker is an open source benchmarking tool used to measure and compare cloud offerings. PerfKit Benchmarker is licensed under the Apache 2 license terms. PerfKit Benchmarker is a community effort involving over 500 participants including researchers, academic institutions and companies together with the originator, Google. == General == PerfKit Benchmarker (PKB) is a community effort to deliver a repeatable, consistent, and open way of measuring Cloud Performance. It supports a growing list of cloud providers including: Alibaba Cloud, Amazon Web Services, CloudStack, DigitalOcean, Google Cloud Platform, Kubernetes, Microsoft Azure, OpenStack, Rackspace, IBM Bluemix (Softlayer). In addition to Cloud Providers to supports container orchestration including Kubernetes [1] and Mesos [2] and local "static" workstations and clusters of computers [3]. The goal is to create an open source living benchmark [framework] that represents how Cloud developers are building applications, evaluating Cloud alternatives, learning how to architect applications for each cloud. Living because it will change and morph quickly as developers change. PerfKit Benchmarker measures the end to end time to provision resources in the cloud, in addition to reporting on the most standard metrics of peak performance, e.g.: latency, throughput, time-to-complete, IOPS. PerfKit Benchmarker reduces the complexity in running benchmarks on supported cloud providers by unified and simple commands. It's designed to operate via vendor provided command line tools. PerfKit Benchmarker contains a canonical set of public benchmarks. All benchmarks are running with default/initial state and configuration (Not tuned to in favor of any providers). This provides a way to benchmark across cloud platforms, while getting a transparent view of application throughput, latency, variance, and overhead. == History == PerfKit Benchmarker (PKB) was started by Anthony F. Voellm, Alain Hamel, and Eric Hankland at Google in 2014. Once an initial "alpha" was in place Anthony F. Voellm and Ivan Santa Maria Filho built a community including ARM, Broadcom, Canonical, CenturyLink, Cisco, CloudHarmony, CloudSpectator, EcoCloud@EPFL, Intel, Mellanox, Microsoft, Qualcomm Technologies, Inc., Rackspace, Red Hat, Tradeworx Inc., and Thesys Technologies LLC. This community worked together behind the scenes in a private GitHub project to create an open way to measure cloud performance. This community released the first public "beta" was released on February 11, 2015, and announced in a blog post at which point the GitHub project was open to everyone. After almost a year and with large adaption (600+ participants on GitHub) the V1.0.0 was released along with a detailed architectural design on December 10, 2015. == Benchmarks == A list of available benchmarks from PerfKitBenchmarker: (The latest set of benchmarks can be found at GitHub readme file.) == Industry participants == Since Google open sourced the PerfKitBenchmarker, it became a community effort from over 30 leading researchers, academic schools and industry companies. Those organizations include: ARM, Broadcom, Canonical, CenturyLink, Cisco, CloudHarmony, Cloud Spectator, EcoCloud@EPFL, Intel, Mellanox, Microsoft, Qualcomm Technologies, Rackspace, Red Hat, and Thesys Technologies. In addition, Stanford and MIT are leading quarterly discussions on default benchmarks and settings proposed by the community. EcoCloud@EPFL is integrating CloudSuite into PerfKit Benchmarker. == Example runs == On Google Cloud Platform On AWS On Azure On Rackspace On a local machine

    Read more →
  • Static program analysis

    Static program analysis

    In computer science, static program analysis (also known as static analysis or static simulation) is the analysis of computer programs performed without executing them, in contrast with dynamic program analysis, which is performed on programs during their execution in the integrated environment. The term is usually applied to analysis performed by an automated tool, with human analysis typically being called "program understanding", program comprehension, or code review. In the last of these, software inspection and software walkthroughs are also used. In most cases the analysis is performed on some version of a program's source code, and, in other cases, on some form of its object code. Two leading approaches to resource certification have been Static Analysis (SA) and Implicit Computational Complexity (ICC). SA is algorithmic in nature: it focuses on a broad programming language of choice, and seeks to determine by syntactic means whether given programs in that language are feasible. In contrast, ICC attempts to create from the outset specialized programming languages or methods that delineate a complexity class. Thus, SA's focus is on compile time, making no demand on the programmer; whereas ICC is a language-design discipline." The discipline of static analysis should not be confused with linting, which is the process of checking for coding style mistakes. == Rationale == The sophistication of the analysis performed by tools varies from those that only consider the behaviour of individual statements and declarations, to those that include the complete source code of a program in their analysis. The uses of the information obtained from the analysis vary from highlighting possible coding errors (e.g., the lint tool) to formal methods that mathematically prove properties about a given program (e.g., its behaviour matches that of its specification). Software metrics and reverse engineering can be described as forms of static analysis. Deriving software metrics and static analysis are increasingly deployed together, especially in creation of embedded systems, by defining so-called software quality objectives. A growing commercial use of static analysis is in the verification of properties of software used in safety-critical computer systems and locating potentially vulnerable code. For example, the following industries have identified the use of static code analysis as a means of improving the quality of increasingly sophisticated and complex software: Medical software: The US Food and Drug Administration (FDA) has identified the use of static analysis for medical devices. Nuclear software: In the UK the Office for Nuclear Regulation (ONR) recommends the use of static analysis on reactor protection systems. Aviation software (in combination with dynamic analysis). Automotive & Machines (functional safety features form an integral part of each automotive product development phase, ISO 26262, section 8). A study in 2012 by VDC Research reported that 28.7% of the embedded software engineers surveyed use static analysis tools and 39.7% expect to use them within 2 years. A study from 2010 found that 60% of the interviewed developers in European research projects made at least use of their basic IDE built-in static analyzers. However, only about 10% employed an additional other (and perhaps more advanced) analysis tool. In the application security industry the name static application security testing (SAST) is also used. SAST is an important part of Security Development Lifecycles (SDLs) such as the SDL defined by Microsoft and a common practice in software companies. == Tool types == The OMG (Object Management Group) published a study regarding the types of software analysis required for software quality measurement and assessment. This document on "How to Deliver Resilient, Secure, Efficient, and Easily Changed IT Systems in Line with CISQ Recommendations" describes three levels of software analysis. Unit Level Analysis that takes place within a specific program or subroutine, without connecting to the context of that program. Technology Level Analysis that takes into account interactions between unit programs to get a more holistic and semantic view of the overall program in order to find issues and avoid obvious false positives. System Level Analysis that takes into account the interactions between unit programs, but without being limited to one specific technology or programming language. A further level of software analysis can be defined. Mission/Business Level Analysis that takes into account the business/mission layer terms, rules and processes that are implemented within the software system for its operation as part of enterprise or program/mission layer activities. These elements are implemented without being limited to one specific technology or programming language and in many cases are distributed across multiple languages, but are statically extracted and analyzed for system understanding for mission assurance. == Formal methods == Formal methods is the term applied to the analysis of software (and computer hardware) whose results are obtained purely through the use of rigorous mathematical methods. The mathematical techniques used include denotational semantics, axiomatic semantics, operational semantics, and abstract interpretation. By a straightforward reduction to the halting problem, it is possible to prove that (for any Turing complete language), finding all possible run-time errors in an arbitrary program (or more generally any kind of violation of a specification on the final result of a program) is undecidable: there is no mechanical method that can always answer truthfully whether an arbitrary program may or may not exhibit runtime errors. This result dates from the works of Church, Gödel and Turing in the 1930s (see: Halting problem and Rice's theorem). As with many undecidable questions, one can still attempt to give useful approximate solutions. Some of the implementation techniques of formal static analysis include: Abstract interpretation, to model the effect that every statement has on the state of an abstract machine (i.e., it 'executes' the software based on the mathematical properties of each statement and declaration). This abstract machine over-approximates the behaviours of the system: the abstract system is thus made simpler to analyze, at the expense of incompleteness (not every property true of the original system is true of the abstract system). If properly done, though, abstract interpretation is sound (every property true of the abstract system can be mapped to a true property of the original system). Data-flow analysis, a lattice-based technique for gathering information about the possible set of values; Hoare logic, a formal system with a set of logical rules for reasoning rigorously about the correctness of computer programs. There is tool support for some programming languages (e.g., the SPARK programming language (a subset of Ada) and the Java Modeling Language—JML—using ESC/Java and ESC/Java2, Frama-C WP (weakest precondition) plugin for the C language extended with ACSL (ANSI/ISO C Specification Language) ). Model checking, considers systems that have finite state or may be reduced to finite state by abstraction; Symbolic execution, as used to derive mathematical expressions representing the value of mutated variables at particular points in the code. Nullable reference analysis == Data-driven static analysis == Data-driven static analysis leverages extensive codebases to infer coding rules and improve the accuracy of the analysis. For instance, one can use all Java open-source packages available on GitHub to learn good analysis strategies. The rule inference can use machine learning techniques. It is also possible to learn from a large amount of past fixes and warnings. == Remediation == Static analyzers produce warnings. For certain types of warnings, it is possible to design and implement automated remediation techniques. For example, Logozzo and Ball have proposed automated remediations for C# cccheck.

    Read more →
  • Cloudlet

    Cloudlet

    A cloudlet is a mobility-enhanced small-scale cloud datacenter that is located at the edge of the Internet. The main purpose of the cloudlet is supporting resource-intensive and interactive mobile applications by providing powerful computing resources to mobile devices with lower latency. It is a new architectural element that extends today's cloud computing infrastructure. It represents the middle tier of a 3-tier hierarchy: mobile device - cloudlet - cloud. A cloudlet can be viewed as a data center in a box whose goal is to bring the cloud closer. The cloudlet term was first coined by M. Satyanarayanan, Victor Bahl, Ramón Cáceres, and Nigel Davies, and a prototype implementation is developed by Carnegie Mellon University as a research project. The concept of cloudlet is also known as follow me cloud, and mobile micro-cloud. == Motivation == Many mobile services split the application into a front-end client program and a back-end server program following the traditional client-server model. The front-end mobile application offloads its functionality to the back-end servers for various reasons such as speeding up processing. With the advent of cloud computing, the back-end server is typically hosted at the cloud datacenter. Though the use of a cloud datacenter offers various benefits such as scalability and elasticity, its consolidation and centralization lead to a large separation between a mobile device and its associated datacenter. End-to-end communication then involves many network hops and results in high latencies and low bandwidth. For the reasons of latency, some emerging mobile applications require cloud offload infrastructure to be close to the mobile device to achieve low response time. In the ideal case, it is just one wireless hop away. For example, the offload infrastructure could be located in a cellular base station or it could be LAN-connected to a set of Wi-Fi base stations. The individual elements of this offload infrastructure are referred to as cloudlets. == Applications == Cloudlets aim to support mobile applications that are both resource-intensive and interactive. Augmented reality applications that use head-tracked systems require end-to-end latencies of less than 16 ms. Cloud games with remote rendering also require low latencies and high bandwidth. Wearable cognitive assistance systems combine devices such as Google Glass with cloud-based processing to guide users through complex tasks. This futuristic genre of applications is characterized as “astonishingly transformative” by the report of the 2013 NSF Workshop on Future Directions in Wireless Networking. These applications use cloud resources in the critical path of real-time user interaction. Consequently, they cannot tolerate end-to-end operation latencies of more than a few tens of milliseconds. Apple Siri and Google Now which perform compute-intensive speech recognition in the cloud, are further examples in this emerging space. == Cloudlet vs Cloud == There is significant overlap in the requirements for cloud and cloudlet. At both levels, there is the need for: (a) strong isolation between untrusted user-level computations; (b) mechanisms for authentication, access control, and metering; (c) dynamic resource allocation for user-level computations; and, (d) the ability to support a very wide range of user-level computations, with minimal restrictions on their process structure, programming languages or operating systems. At a cloud datacenter, these requirements are met today using the virtual machine (VM) abstraction. For the same reasons they are used in cloud computing today, VMs are used as an abstraction for cloudlets. Meanwhile, there are a few but important differentiators between cloud and cloudlet. === Rapid provisioning === Different from cloud data centers that are optimized for launching existing VM images in their storage tier, cloudlets need to be much more agile in their provisioning. Their association with mobile devices is highly dynamic, with considerable churn due to user mobility. A user from far away may unexpectedly show up at a cloudlet (e.g., if he just got off an international flight) and try to use it for an application such as a personalized language translator. For that user, the provisioning delay before he is able to use the application impacts usability. === VM handoff across cloudlets === If a mobile device user moves away from the cloudlet he is currently using, the interactive response will degrade as the logical network distance increases. To address this effect of user mobility, the offloaded services on the first cloudlet need to be transferred to the second cloudlet maintaining end-to-end network quality. This resembles live migration in cloud computing but differs considerably in a sense that the VM handoff happens in Wide Area Network (WAN). == OpenStack++ == Since the cloudlet model requires reconfiguration or additional deployment of hardware/software, it is important to provide a systematic way to incentivise the deployment. However, it can face a classic bootstrapping problem. Cloudlets need practical applications to incentivize cloudlet deployment. However, developers cannot heavily rely on cloudlet infrastructure until it is widely deployed. To break this deadlock and bootstrap the cloudlet deployment, researchers at Carnegie Mellon University proposed OpenStack++ that extends OpenStack to leverage its open ecosystem. OpenStack++ provides a set of cloudlet-specific APIs as OpenStack extensions. == Commercial implementations and standardization effort == By 2015 cloudlet based applications were commercially available. In 2017 the National Institute of Standards and Technology published draft standards for fog computing in which cloudlets were defined as nodes on the fog architecture.

    Read more →
  • ZipBooks

    ZipBooks

    ZipBooks is a free online accounting software company based in American Fork, Utah. The cloud-based software is an accounting and bookkeeping tool that helps business owners process credit cards, track finances, and send invoices, among other features. == History == ZipBooks was founded by Tim Chaves in June 2015, backed by venture capital firm Peak Ventures. The company secured an additional $2 million of funding in July 2016, and in 2017 it was awarded a $100,000 economic grant by the Utah Governor's Office of Economic Development Technology Commercialization and Innovation Program. == Products == ZipBooks' core modules are invoicing, transactions, bills, reporting, time tracking, contacts, and payroll. Accrual accounting was added in 2017. The application is available on G Suite, iOS, Slack, and as a web application. == Reception == Computerworld compared ZipBooks favorably with other accounting software. PC Magazine praised its user experience, but stated it lacked "a lot of features that competing sites offer".

    Read more →
  • Flutter (software)

    Flutter (software)

    Flutter is an open-source UI software development kit created by Google. It can be used to develop cross platform applications from a single codebase for the web, Fuchsia, Android, iOS, Linux, macOS, and Windows. First described in 2015, Flutter was released in May 2017. Flutter is used internally by Google in apps such as Google Pay and Google Earth as well as by other software developers including ByteDance and Alibaba. Flutter ships applications with its own rendering engine which directly outputs pixel data to the screen. This is in contrast to many other UI frameworks that rely on the target platform to provide a rendering engine, such as native Android apps which rely on the device-level Android SDK or iOS SDK which use the target platform's built-in UI stack. Flutter's control of its rendering pipeline simplifies multi-platform support as identical UI code can be used for all target platforms.One of Flutter’s key features is hot reload, which allows developers to see code changes instantly without restarting the application. == Architecture == The basic component in a Flutter program is a "widget", which can in turn consist of other widgets. A widget describes the logic, interaction, and design of a UI element with an implementation similar to React. Unlike other cross-platform toolkits such as React Native and Xamarin which draw widgets using native platform components, Flutter renders widgets itself on a per-pixel basis. Flutter has two types of widgets: stateless and stateful. Stateless widgets only update if their inputs change, meaning they otherwise won't need to be rebuilt when other elements of the screen change, while stateful widgets can call the setState() method to update an internal state and redraw. Although widgets are the primary method of constructing Flutter applications, they can also be bypassed in favor of directly drawing on a canvas. This feature has been occasionally used to implement game engines in Flutter. The Flutter framework contains two sets of widgets that conform to specific design languages: Material Design widgets implement Google's design language of the same name, and Cupertino widgets implement Apple's iOS Human interface guidelines. Flutter allows the developer to use either set of widgets on either platform. Developers can use Cupertino widgets on Android. Flutter apps are written in the Dart language. Release versions of Flutter apps on all platforms use ahead-of-time (AOT) compilation except for on the Web where code is transpiled to JavaScript or WebAssembly. Flutter inherits Dart's Pub package manager and software repository, which allows users to publish and use custom packages as well as Flutter-specific plugins. The Foundation library, written in Dart, provides basic classes and functions that are used to construct applications using Flutter, such as APIs to communicate with the engine. Flutter's engine, written primarily in C++, provides low-level rendering support using either Google's Skia graphics library or the custom "Impeller" graphics layer, which is enabled by default on iOS and Android API 29 and higher. The engine interfaces with platform-specific SDKs such as those provided by Android and iOS to implement features like accessibility, file and network I/O, native plugin support, etc. == History == The first version of Flutter was known as "Sky" and ran on the Android operating system. It was unveiled at the 2015 Dart developer summit with the stated intent of being able to render consistently at 120 frames per second. On December 4, 2018, Flutter 1.0 was released at the Flutter conference in London. On May 6, 2020, the Dart software development kit (SDK) version 2.8 and Flutter 1.17.0 were released, adding support for the Metal API. On March 3, 2021, Google released Flutter 2 during an online Flutter Engage event. It added a Canvas-based renderer for web in addition to the HTML-based renderer and early-access desktop application support for Windows, macOS, and Linux. It also shipped with Dart 2.0 which included support for null-safety. Null safety was initially optional as it was a breaking change and was made mandatory in Dart 3 released in 2023. On May 12, 2022, Flutter 3 and Dart 2.17 were released with support for all desktop platforms as stable. On October 27, 2024, a number of Flutter community developers announced Flock, a fork of Flutter intended to be easier to contribute to while still keeping in sync with all changes made in the upstream code base. In 2025, Google continued Flutter's evolution with enhanced modular architecture, foldable device support, and ARM IoT optimizations as outlined in the updated roadmap. === Major releases in Flutter === Prior to the Flutter 2.0 release in March of 2021, the Flutter framework was centered on mobile development. The developers of Flutter were primarily focused on the two main platforms, IOS and Android. Specifically, they wanted to deliver strong performance and improve access to native API and platform features and expand the widget system. With the release of Flutter 2.0, the framework moved beyond mobile and introduced support for the web platform. This marked a shift into a broader cross platform development environment. With this release, developers could produce applications for Web, Android and IOS from the same codebase. This release also brought the desktop platform closer to stable. There have been a number of improvements since then that have broadened platform support. They introduced enhancements to performance and workflow, redefined the developer’s toolkit, and added an improved rendering engine. "Flutter 2.10.0 release notes". docs.flutter.dev. Retrieved 2025-11-11.

    Read more →
  • ArcObjects

    ArcObjects

    ArcObjects is a development environment of the ArcGIS family of applications. Using Visual Basic for Applications, C# or Java SDK for ArcGIS, it allows developers to extend these applications.ArcObjects is a library of Component Object Model (COM) components that build up the foundation of Esri's ArcGIS platform. ArcObjects is written primarily in the C++ programming language. Since ArcGIS is completely built on top of ArcObjects, the ArcGIS platform can be fully customized and extended by making use of its COM services and capabilities. This allows for easy extension of the ArcObjects data model with any programming language that is compatible with COM, such as Visual Basic, C#, Visual Basic.NET, Java and Python. COM enables components to be reused at a binary level, meaning developers do not require access to the source code of ArcObjects in order to extend the ArcGIS platform. For this reason, an ArcObjects programmer can make use of any type inside the ArcObjects system without knowing the implementation details of the type, only needing to know what the type is able to do. The ArcObjects data model is based on the COM standard, which makes it compatible with other COM objects and applications. This allows for easy integration and collaboration with other systems that are also based on the COM standard. The ArcGIS platform was built using ArcObjects types, such as classes, interfaces, and enumerations. ArcObjects use COM interfaces to organize and communicate properties and methods of its classes, ensuring compatibility with other COM-based objects and systems. When working with an ArcObjects COM class, its properties and methods are accessed solely through one of its implemented interfaces via the process of Query Interface (QI). Multiple interfaces are commonly available for classes in ArcObjects. For example, it is possible to query for additional interfaces implemented by an object after instantiation via the process of QI. Although only one interface can be used when instantiating an object, multiple interfaces are often available for classes in ArcObjects, allowing for greater flexibility and compatibility with other systems based on the COM standard.

    Read more →
  • Fuse Services Framework

    Fuse Services Framework

    Fuse Services Framework is an open source SOAP and REST web services platform based on Apache CXF for use in enterprise IT organizations. It is productized and supported by the Fuse group at FuseSource Corp. Fuse Services Framework service-enables new and existing systems for use in enterprise SOA infrastructure. Fuse Services Framework is a pluggable, small-footprint engine that creates high performance, secure and robust services in minutes using front-end programming APIs like JAX-WS and JAX-RS. It supports multiple transports and bindings and is extensible so developers can add bindings for additional message formats so all systems can work together without having to communicate through a centralized server. Fuse Services Framework is now a part of Red Hat JBoss Fuse. Fabric8 is a free Apache 2.0 Licensed upstream community for the JBoss Fuse product from Red Hat.

    Read more →
  • Case-based reasoning

    Case-based reasoning

    Case-based reasoning (CBR), broadly construed, is the process of solving new problems based on the solutions of similar past problems. In everyday life, an auto mechanic who fixes an engine by recalling another car that exhibited similar symptoms is using case-based reasoning. A lawyer who advocates a particular outcome in a trial based on legal precedents or a judge who creates case law is using case-based reasoning. So, too, an engineer copying working elements of nature (practicing biomimicry) is treating nature as a database of solutions to problems. Case-based reasoning is a prominent type of analogy solution making. It has been argued that case-based reasoning is not only a powerful method for computer reasoning, but also a pervasive behavior in everyday human problem solving; or, more radically, that all reasoning is based on past cases personally experienced. This view is related to prototype theory, which is most deeply explored in cognitive science. == Process == Case-based reasoning has been formalized for purposes of computer reasoning as a four-step process: Retrieve: Given a target problem, retrieve cases relevant to solving it from memory. A case consists of a problem, its solution, and, typically, annotations about how the solution was derived. For example, suppose Fred wants to prepare blueberry pancakes. Being a novice cook, the most relevant experience he can recall is one in which he successfully made plain pancakes. The procedure he followed for making the plain pancakes, together with justifications for decisions made along the way, constitutes Fred's retrieved case. Reuse: Map the solution from the previous case to the target problem. This may involve adapting the solution as needed to fit the new situation. In the pancake example, Fred must adapt his retrieved solution to include the addition of blueberries. Revise: Having mapped the previous solution to the target situation, test the new solution in the real world (or a simulation) and, if necessary, revise. Suppose Fred adapted his pancake solution by adding blueberries to the batter. After mixing, he discovers that the batter has turned blue – an undesired effect. This suggests the following revision: delay the addition of blueberries until after the batter has been ladled into the pan. Retain: After the solution has been successfully adapted to the target problem, store the resulting experience as a new case in memory. Fred, accordingly, records his new-found procedure for making blueberry pancakes, thereby enriching his set of stored experiences, and better preparing him for future pancake-making demands. == Comparison to other methods == At first glance, CBR may seem similar to the rule induction algorithms of machine learning. Like a rule-induction algorithm, CBR starts with a set of cases or training examples; it forms generalizations of these examples, albeit implicit ones, by identifying commonalities between a retrieved case and the target problem. If for instance a procedure for plain pancakes is mapped to blueberry pancakes, a decision is made to use the same basic batter and frying method, thus implicitly generalizing the set of situations under which the batter and frying method can be used. The key difference, however, between the implicit generalization in CBR and the generalization in rule induction lies in when the generalization is made. A rule-induction algorithm draws its generalizations from a set of training examples before the target problem is even known; that is, it performs eager generalization. For instance, if a rule-induction algorithm were given recipes for plain pancakes, Dutch apple pancakes, and banana pancakes as its training examples, it would have to derive, at training time, a set of general rules for making all types of pancakes. It would not be until testing time that it would be given, say, the task of cooking blueberry pancakes. The difficulty for the rule-induction algorithm is in anticipating the different directions in which it should attempt to generalize its training examples. This is in contrast to CBR, which delays (implicit) generalization of its cases until testing time – a strategy of lazy generalization. In the pancake example, CBR has already been given the target problem of cooking blueberry pancakes; thus it can generalize its cases exactly as needed to cover this situation. CBR therefore tends to be a good approach for rich, complex domains in which there are myriad ways to generalize a case. In law, there is often explicit delegation of CBR to courts, recognizing the limits of rule based reasons: limiting delay, limited knowledge of future context, limit of negotiated agreement, etc. While CBR in law and cognitively inspired CBR have long been associated, the former is more clearly an interpolation of rule based reasoning, and judgment, while the latter is more closely tied to recall and process adaptation. The difference is clear in their attitude toward error and appellate review. Another name for case-based reasoning in problem solving is symptomatic strategies. It does require à priori domain knowledge that is gleaned from past experience which established connections between symptoms and causes. This knowledge is referred to as shallow, compiled, evidential, history-based as well as case-based knowledge. This is the strategy most associated with diagnosis by experts. Diagnosis of a problem transpires as a rapid recognition process in which symptoms evoke appropriate situation categories. An expert knows the cause by virtue of having previously encountered similar cases. Case-based reasoning is the most powerful strategy, and that used most commonly. However, the strategy won't work independently with truly novel problems, or where deeper understanding of whatever is taking place is sought. An alternative approach to problem solving is the topographic strategy which falls into the category of deep reasoning. With deep reasoning, in-depth knowledge of a system is used. Topography in this context means a description or an analysis of a structured entity, showing the relations among its elements. Also known as reasoning from first principles, deep reasoning is applied to novel faults when experience-based approaches aren't viable. The topographic strategy is therefore linked to à priori domain knowledge that is developed from a more a fundamental understanding of a system, possibly using first-principles knowledge. Such knowledge is referred to as deep, causal or model-based knowledge. Hoc and Carlier noted that symptomatic approaches may need to be supported by topographic approaches because symptoms can be defined in diverse terms. The converse is also true – shallow reasoning can be used abductively to generate causal hypotheses, and deductively to evaluate those hypotheses, in a topographical search. == Criticism == Critics of CBR argue that it is an approach that accepts anecdotal evidence as its main operating principle. Without statistically relevant data for backing and implicit generalization, there is no guarantee that the generalization is correct. However, all inductive reasoning where data is too scarce for statistical relevance is inherently based on anecdotal evidence. == History == CBR traces its roots to the work of Roger Schank and his students at Yale University in the early 1980s. Schank's model of dynamic memory was the basis for the earliest CBR systems: Janet Kolodner's CYRUS and Michael Lebowitz's IPP. Other schools of CBR and closely allied fields emerged in the 1980s, which directed at topics such as legal reasoning, memory-based reasoning (a way of reasoning from examples on massively parallel machines), and combinations of CBR with other reasoning methods. In the 1990s, interest in CBR grew internationally, as evidenced by the establishment of an International Conference on Case-Based Reasoning in 1995, as well as European, German, British, Italian, and other CBR workshops. CBR technology has resulted in the deployment of a number of successful systems, the earliest being Lockheed's CLAVIER, a system for laying out composite parts to be baked in an industrial convection oven. CBR has been used extensively in applications such as the Compaq SMART system and has found a major application area in the health sciences, as well as in structural safety management. There is recent work that develops CBR within a statistical framework and formalizes case-based inference as a specific type of probabilistic inference. Thus, it becomes possible to produce case-based predictions equipped with a certain level of confidence. One description of the difference between CBR and induction from instances is that statistical inference aims to find what tends to make cases similar while CBR aims to encode what suffices to claim similarly.

    Read more →
  • Electronic business

    Electronic business

    Electronic business (also known as online business or e-business) is any kind of business or commercial activity that includes sharing information across the internet. Commerce constitutes the exchange of products and services between businesses, groups, and individuals; and can be seen as one of the essential activities of any business. E-commerce focuses on the use of ICT to enable the external activities and relationships of the business with individuals, groups, and other organizations, while e-business does not only deal with online commercial operations of enterprises, but also deals with their other organizational matters such as human resource management and production. The term "e-business" was coined by IBM's marketing and Internet team in 1996. == Market participants == Electronic business can take place between a very large number of market participants; it can be between business and consumer, private individuals, public administrations, or any other organizations such as non-governmental organizations (NGOs). These various market participants can be divided into three main groups: Business (B) Consumer (C) Administration (A) All of them can be either buyers or service providers within the market. There are nine possible combinations for electronic business relationships. B2C and B2B belong to E-commerce, while A2B and A2A belong to the E-government sector which is also a part of the electronic business. == History == One of the founding pillars of electronic business was the development of the Electronic Data Interchange (EDI) electronic data interchange. This system replaced traditional mailing and faxing of documents with a digital transfer of data from one computer to another, without any human intervention. Michael Aldrich is considered the developer of the predecessor to online shopping. In 1979, the entrepreneur connected a television set to a transaction processing computer with a telephone line and called it "teleshopping", meaning shopping at distance. From the mid-nineties, major advancements were made in the commercial use of the Internet. Amazon, which launched in 1995, started as an online bookstore and grew to become nowadays the largest online retailer worldwide, selling food, toys, electronics, apparel and more. Other successful stories of online marketplaces include eBay or Etsy. In 1994, IBM, with its agency Ogilvy & Mather, began to use its foundation in IT solutions and expertise to market itself as a leader of conducting business on the Internet through the term "e-business." Then CEO Louis V. Gerstner, Jr. was prepared to invest $1 billion to market this new brand. After conducting worldwide market research in October 1997, IBM began with an eight-page piece in The Wall Street Journal that would introduce the concept of "e-business" and advertise IBM's expertise in the new field. IBM decided not to trademark the term "e-business" in the hopes that other companies would use the term and create an entirely new industry. However, this proved to be too successful and by 2000, to differentiate itself, IBM launched a $300 million campaign about its "e-business infrastructure" capabilities. Since that time, the terms, "e-business" and "e-commerce" have been loosely interchangeable and have become a part of the common vernacular. According to the U.S. Department Of Commerce, the estimated retail e-commerce sales in Q1 2020 were representing almost 12% of total U.S. retail sales, against 4% for Q1 2010. == Business model == The transformation toward e-business is complex and in order for it to succeed, there is a need to balance between strategy, an adapted business model (e-intermediary, marketplaces), right processes (sales, marketing) and technology (Supply Chain Management, Customer Relationship Management). When organizations go online, they have to decide which e-business models best suit their goals. A business model is defined as the organization of product, service and information flows, and the source of revenues and benefits for suppliers and customers. The concept of the e-business model is the same but used in online presence. === Revenue model === A key component of the business model is the revenue model or profit model, which is a framework for generating revenues. It identifies which revenue source to pursue, what value to offer, how to price the value, and who pays for the value. It is a key component of a company's business model. It primarily identifies what product or service will be created in order to generate revenues and the ways in which the product or service will be sold. Without a well-defined revenue model, that is, a clear plan of how to generate revenues, new businesses will more likely struggle due to costs that they will not be able to sustain. By having a revenue model, a business can focus on a target audience, fund development plans for a product or service, establish marketing plans, begin a line of credit and raise capital. ==== E-commerce ==== E-commerce (short for "electronic commerce") is trading in products or services using computer networks, such as the Internet. Electronic commerce draws on technologies such as mobile commerce, electronic funds transfer, supply chain management, Internet marketing, online transaction processing, electronic data interchange (EDI), inventory management systems, and automated data collection. Modern electronic commerce typically uses the World Wide Web for at least one part of the transaction's life cycle, although it may also use other technologies such as e-mail. == Concerns == While much has been written of the economic advantages of Internet-enabled commerce, there is also evidence that some aspects of the internet such as maps and location-aware services may serve to reinforce economic inequality and the digital divide. Electronic commerce may be responsible for consolidation and the decline of mom-and-pop, brick and mortar businesses resulting in increases in income inequality. === Security === E-business systems naturally have greater security risks than traditional business systems, therefore it is important for e-business systems to be fully protected against these risks. A far greater number of people have access to e-businesses through the internet than would have access to a traditional business. Customers, suppliers, employees, and numerous other people use any particular e-business system daily and expect their confidential information to stay secure. Hackers are one of the great threats to the security of e-businesses. Some common security concerns for e-Businesses include keeping business and customer information private and confidential, the authenticity of data, and data integrity. Some of the methods of protecting e-business security and keeping information secure include physical security measures as well as data storage, data transmission, anti-virus software, firewalls, and encryption to list a few. ==== Privacy and confidentiality ==== Confidentiality is the extent to which businesses makes personal information available to other businesses and individuals. With any business, confidential information must remain secure and only be accessible to the intended recipient. However, this becomes even more difficult when dealing with e-businesses specifically. To keep such information secure means protecting any electronic records and files from unauthorized access, as well as ensuring safe transmission and data storage of such information. Tools such as encryption and firewalls manage this specific concern within e-business. ==== Authenticity ==== E-business transactions pose greater challenges for establishing authenticity due to the ease with which electronic information may be altered and copied. Both parties in an e-business transaction want to have the assurance that the other party is who they claim to be, especially when a customer places an order and then submits a payment electronically. One common way to ensure this is to limit access to a network or trusted parties by using a virtual private network (VPN) technology. The establishment of authenticity is even greater when a combination of techniques are used, and such techniques involve checking "something you know" (i.e. password or PIN), "something you need" (i.e. credit card), or "something you are" (i.e. digital signatures or voice recognition methods). Many times in e-business, however, "something you are" is pretty strongly verified by checking the purchaser's "something you have" (i.e. credit card) and "something you know" (i.e. card number). ==== Data integrity ==== Data integrity answers the question "Can the information be changed or corrupted in any way?" This leads to the assurance that the message received is identical to the message sent. A business needs to be confident that data is not changed in transit, whether deliberately or by accident. To help with data integrity, firewalls protect stored data against unauthorized access, while

    Read more →
  • Tweak programming environment

    Tweak programming environment

    Tweak is a graphical user interface (GUI) layer written by Andreas Raab for the Squeak development environment, which in turn is an integrated development environment based on the Smalltalk-80 computer programming language. Tweak is an alternative to an earlier graphic user interface layer called Morphic. Development began in 2001. Applications that use the Tweak software include Sophie (version 1), a multimedia and e-book authoring system, and a family of virtual world systems: Open Cobalt, Teleplace, OpenQwaq, 3d ICC's Immersive Terf and the Croquet Project. == Influences == An experimental version of Etoys, a programming environment for children, used Tweak instead of Morphic. Etoys was a major influence on a similar Squeak-based programming environment known as Scratch.

    Read more →