AI Headshot Improver — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.
Yap Speech Cloud was a multimodal speech recognition system developed by American technology company Yap Inc. It offered a fully cloud-based speech-to-text transcription platform that was used by customers such as Microsoft. The Company was a contestant at the inaugural TechCrunch conference and was subsequently acquired by Amazon in September 2011 to help develop products such as Alexa Voice Service, Echo, and Fire TV.
Read more →
Blockmodeling is a set or a coherent framework, that is used for analyzing social structure and also for setting procedure(s) for partitioning (clustering) social network's units (nodes, vertices, actors), based on specific patterns, which form a distinctive structure through interconnectivity. It is primarily used in statistics, machine learning and network science. As an empirical procedure, blockmodeling assumes that all the units in a specific network can be grouped together to such extent to which they are equivalent. Regarding equivalency, it can be structural, regular or generalized. Using blockmodeling, a network can be analyzed using newly created blockmodels, which transforms large and complex network into a smaller and more comprehensible one. At the same time, the blockmodeling is used to operationalize social roles. While some contend that the blockmodeling is just clustering methods, Bonacich and McConaghy state that "it is a theoretically grounded and algebraic approach to the analysis of the structure of relations". Blockmodeling's unique ability lies in the fact that it considers the structure not just as a set of direct relations, but also takes into account all other possible compound relations that are based on the direct ones. The principles of blockmodeling were first introduced by Francois Lorrain and Harrison C. White in 1971. Blockmodeling is considered as "an important set of network analytic tools" as it deals with delineation of role structures (the well-defined places in social structures, also known as positions) and the discerning the fundamental structure of social networks. According to Batagelj, the primary "goal of blockmodeling is to reduce a large, potentially incoherent network to a smaller comprehensible structure that can be interpreted more readily". Blockmodeling was at first used for analysis in sociometry and psychometrics, but has now spread also to other sciences. == Definition == A network as a system is composed of (or defined by) two different sets: one set of units (nodes, vertices, actors) and one set of links between the units. Using both sets, it is possible to create a graph, describing the structure of the network. During blockmodeling, the researcher is faced with two problems: how to partition the units (e.g., how to determine the clusters (or classes), that then form vertices in a blockmodel) and then how to determine the links in the blockmodel (and at the same time the values of these links). In the social sciences, the networks are usually social networks, composed of several individuals (units) and selected social relationships among them (links). Real-world networks can be large and complex; blockmodeling is used to simplify them into smaller structures that can be easier to interpret. Specifically, blockmodeling partitions the units into clusters and then determines the ties among the clusters. At the same time, blockmodeling can be used to explain the social roles existing in the network, as it is assumed that the created cluster of units mimics (or is closely associated with) the units' social roles. Blockmodeling can thus be defined as a set of approaches for partitioning units into clusters (also known as positions) and links into blocks, which are further defined by the newly obtained clusters. A block (also blockmodel) is defined as a submatrix, that shows interconnectivity (links) between nodes, present in the same or different clusters. Each of these positions in the cluster is defined by a set of (in)direct ties to and from other social positions. These links (connections) can be directed or undirected; there can be multiple links between the same pair of objects or they can have weights on them. If there are not any multiple links in a network, it is called a simple network. A matrix representation of a graph is composed of ordered units, in rows and columns, based on their names. The ordered units with similar patterns of links are partitioned together in the same clusters. Clusters are then arranged together so that units from the same clusters are placed next to each other, thus preserving interconnectivity. In the next step, the units (from the same clusters) are transformed into a blockmodel. With this, several blockmodels are usually formed, one being core cluster and others being cohesive; a core cluster is always connected to cohesive ones, while cohesive ones cannot be linked together. Clustering of nodes is based on the equivalence, such as structural and regular. The primary objective of the matrix form is to visually present relations between the persons included in the cluster. These ties are coded dichotomously (as present or absent), and the rows in the matrix form indicate the source of the ties, while the columns represent the destination of the ties. Equivalence can have two basic approaches: the equivalent units have the same connection pattern to the same neighbors or these units have same or similar connection pattern to different neighbors. If the units are connected to the rest of network in identical ways, then they are structurally equivalent. Units can also be regularly equivalent, when they are equivalently connected to equivalent others. With blockmodeling, it is necessary to consider the issue of results being affected by measurement errors in the initial stage of acquiring the data. == Different approaches == Regarding what kind of network is undergoing blockmodeling, a different approach is necessary. Networks can be one–mode or two–mode. In the former all units can be connected to any other unit and where units are of the same type, while in the latter the units are connected only to the unit(s) of a different type. Regarding relationships between units, they can be single–relational or multi–relational networks. Further more, the networks can be temporal or multilevel and also binary (only 0 and 1) or signed (allowing negative ties)/values (other values are possible) networks. Different approaches to blockmodeling can be grouped into two main classes: deterministic blockmodeling and stochastic blockmodeling approaches. Deterministic blockmodeling is then further divided into direct and indirect blockmodeling approaches. Among direct blockmodeling approaches are: structural equivalence and regular equivalence. Structural equivalence is a state, when units are connected to the rest of the network in an identical way(s), while regular equivalence occurs when units are equally related to equivalent others (units are not necessarily sharing neighbors, but have neighbour that are themselves similar). Indirect blockmodeling approaches, where partitioning is dealt with as a traditional cluster analysis problem (measuring (dis)similarity results in a (dis)similarity matrix), are: conventional blockmodeling, generalized blockmodeling: generalized blockmodeling of binary networks, generalized blockmodeling of valued networks and generalized homogeneity blockmodeling, prespecified blockmodeling. According to Brusco and Steinley (2011), the blockmodeling can be categorized (using a number of dimensions): deterministic or stochastic blockmodeling, one–mode or two–mode networks, signed or unsigned networks, exploratory or confirmatory blockmodeling. == Blockmodels == Blockmodels (sometimes also block models) are structures in which: vertices (e.g., units, nodes) are assembled within a cluster, with each cluster identified as a vertex; from such vertices a graph can be constructed; combinations of all the links (ties), represented in a block as a single link between positions, while at the same time constructing one tie for each block. In a case, when there are no ties in a block, there will be no ties between the two positions that define the block. Computer programs can partition the social network according to pre-set conditions. When empirical blocks can be reasonably approximated in terms of ideal blocks, such blockmodels can be reduced to a blockimage, which is a representation of the original network, capturing its underlying 'functional anatomy'. Thus, blockmodels can "permit the data to characterize their own structure", and at the same time not seek to manifest a preconceived structure imposed by the researcher. Blockmodels can be created indirectly or directly, based on the construction of the criterion function. Indirect construction refers to a function, based on "compatible (dis)similarity measure between paris of units", while the direct construction is "a function measuring the fit of real blocks induced by a given clustering to the corresponding ideal blocks with perfect relations within each cluster and between clusters according to the considered types of connections (equivalence)". === Types === Blockmodels can be specified regarding the intuition, substance or the insight into the nature of the studied network; this can result in such models as follows: parent-child role systems, organizational hierarchies, systems of
Read more →
The clustering illusion is the tendency to erroneously consider the inevitable "streaks" or "clusters" arising in small samples from random distributions to be non-random. The illusion is caused by a human tendency to underpredict the amount of variability likely to appear in a small sample of random or pseudorandom data. Thomas Gilovich, an early author on the subject, argued that the effect occurs for different types of random dispersions. Some might perceive patterns in stock market price fluctuations over time, or clusters in two-dimensional data such as the locations of impact of World War II V-1 flying bombs on maps of London. Although Londoners developed specific theories about the pattern of impacts within London, a statistical analysis by R. D. Clarke originally published in 1946 showed that the impacts of V-2 rockets on London were a close fit to a random distribution. == Similar biases == Using this cognitive bias in causal reasoning may result in the Texas sharpshooter fallacy, in which differences in data are ignored and similarities are overemphasized. More general forms of erroneous pattern recognition are pareidolia and apophenia. Related biases are the illusion of control which the clustering illusion could contribute to, and insensitivity to sample size in which people don't expect greater variation in smaller samples. A different cognitive bias involving misunderstanding of chance streams is the gambler's fallacy. == Possible causes == Daniel Kahneman and Amos Tversky explained this kind of misprediction as being caused by the representativeness heuristic (which itself they also first proposed).
Read more →
In mathematics, Bondy's theorem is a bound on the number of elements needed to distinguish the sets in a family of sets from each other. It belongs to the field of combinatorics, and is named after John Adrian Bondy, who published it in 1972. == Statement == The theorem is as follows: Let X be a set with n elements and let A1, A2, ..., An be distinct subsets of X. Then there exists a subset S of X with n − 1 elements such that the sets Ai ∩ S are all distinct. In other words, if we have a 0-1 matrix with n rows and n columns such that each row is distinct, we can remove one column such that the rows of the resulting n × (n − 1) matrix are distinct. == Example == Consider the 4 × 4 matrix [ 1 1 0 1 0 1 0 1 0 0 1 1 0 1 1 0 ] {\displaystyle {\begin{bmatrix}1&1&0&1\\0&1&0&1\\0&0&1&1\\0&1&1&0\end{bmatrix}}} where all rows are pairwise distinct. If we delete, for example, the first column, the resulting matrix [ 1 0 1 1 0 1 0 1 1 1 1 0 ] {\displaystyle {\begin{bmatrix}1&0&1\\1&0&1\\0&1&1\\1&1&0\end{bmatrix}}} no longer has this property: the first row is identical to the second row. Nevertheless, by Bondy's theorem we know that we can always find a column that can be deleted without introducing any identical rows. In this case, we can delete the third column: all rows of the 3 × 4 matrix [ 1 1 1 0 1 1 0 0 1 0 1 0 ] {\displaystyle {\begin{bmatrix}1&1&1\\0&1&1\\0&0&1\\0&1&0\end{bmatrix}}} are distinct. Another possibility would have been deleting the fourth column. == Learning theory application == From the perspective of computational learning theory, Bondy's theorem can be rephrased as follows: Let C be a concept class over a finite domain X. Then there exists a subset S of X with the size at most |C| − 1 such that S is a witness set for every concept in C. This implies that every finite concept class C has its teaching dimension bounded by |C| − 1.
Read more →
The Apache OpenNLP library is a machine learning based toolkit for the processing of natural language text. It supports the most common NLP tasks, such as language detection, tokenization, sentence segmentation, part-of-speech tagging, named entity extraction, chunking, parsing and coreference resolution. These tasks are usually required to build more advanced text processing services.
Read more →
The Persian Speech Corpus is a Modern Persian speech corpus for speech synthesis. The corpus contains phonetic and orthographic transcriptions of about 2.5 hours of Persian speech aligned with recorded speech on the phoneme level, including annotations of word boundaries. Previous spoken corpora of Persian include FARSDAT, which consists of read aloud speech from newspaper texts from 100 Persian speakers and the Telephone FARsi Spoken language DATabase (TFARSDAT) which comprises seven hours of read and spontaneous speech produced by 60 native speakers of Persian from ten regions of Iran. The Persian Speech Corpus was built using the same methodologies laid out in the doctoral project on Modern Standard Arabic of Nawar Halabi at the University of Southampton. The work was funded by MicroLinkPC, who own an exclusive license to commercialise the corpus, though the corpus is available for non-commercial use through the corpus' website. It is distributed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. The corpus was built for speech synthesis purposes, but has been used for building HMM based voices in Persian. It can also be used to automatically align other speech corpora with their phonetic transcript and could be used as part of a larger corpus for training speech recognition systems. == Contents == The corpus is downloadable from its website, and contains the following: 396 .wav files containing spoken utterances 396 .lab files containing text utterances 396 .TextGrid files containing the phoneme labels with time stamps of the boundaries where these occur in the .wav files. phonetic-transcript.txt which has the form "[wav_filename]" "[Phoneme Sequence]" in every line orthographic-transcript.txt which has the form "[wav_filename]" "[Orthographic Transcript]" in every line
Read more →
Multimodal learning is a type of deep learning that integrates and processes multiple types of data, referred to as modalities, such as text, audio, images, or video. This integration allows for a more holistic understanding of complex data, improving model performance in tasks like visual question answering, cross-modal retrieval, text-to-image generation, aesthetic ranking, and image captioning. Multimodal learning was proposed in 2011 at the beginning of the deep learning period. Large multimodal models, such as Google Gemini and GPT-4o, have become increasingly popular since 2023, enabling increased versatility and a broader understanding of real-world phenomena. == Motivation == Data usually comes with different modalities which carry different information. For example, it is very common to caption an image to convey the information not presented in the image itself. Similarly, sometimes it is more straightforward to use an image to describe information which may not be obvious from text. As a result, if different words appear in similar images, then these words likely describe the same thing. Conversely, if a word is used to describe seemingly dissimilar images, then these images may represent the same object. Thus, in cases dealing with multi-modal data, it is important to use a model which is able to jointly represent the information such that the model can capture the combined information from different modalities. == Multimodal transformers == Models such as CLIP (Contrastive Language–Image Pretraining) learn joint representations of images and text by optimizing contrastive objectives, allowing the model to match images with their corresponding textual descriptions. == Multimodal deep Boltzmann machines == A Boltzmann machine is a type of stochastic neural network invented by Geoffrey Hinton and Terry Sejnowski in 1985. Boltzmann machines can be seen as the stochastic, generative counterpart of Hopfield nets. They are named after the Boltzmann distribution in statistical mechanics. The units in Boltzmann machines are divided into two groups: visible units and hidden units. Each unit is like a neuron with a binary output that represents whether it is activated or not. General Boltzmann machines allow connection between any units. However, learning is impractical using general Boltzmann Machines because the computational time is exponential to the size of the machine. A more efficient architecture is called restricted Boltzmann machine where connection is only allowed between hidden unit and visible unit, which is described in the next section. Multimodal deep Boltzmann machines can process and learn from different types of information, such as images and text, simultaneously. This can notably be done by having a separate deep Boltzmann machine for each modality, for example one for images and one for text, joined at an additional top hidden layer. == Applications == Multimodal machine learning has numerous applications across various domains: Cross-modal retrieval: cross-modal retrieval allows users to search for data across different modalities (e.g., retrieving images based on text descriptions), improving multimedia search engines and content recommendation systems. Classification and missing data retrieval: multimodal Deep Boltzmann Machines outperform traditional models like support vector machines and latent Dirichlet allocation in classification tasks and can predict missing data in multimodal datasets, such as images and text. Healthcare diagnostics: multimodal models integrate medical imaging, genomic data, and patient records to improve diagnostic accuracy and early disease detection, especially in cancer screening. Content generation: models like DALL·E generate images from textual descriptions, benefiting creative industries, while cross-modal retrieval enables dynamic multimedia searches. Robotics and human-computer interaction: multimodal learning improves interaction in robotics and AI by integrating sensory inputs like speech, vision, and touch, aiding autonomous systems and human-computer interaction. Emotion recognition: combining visual, audio, and text data, multimodal systems enhance sentiment analysis and emotion recognition, applied in customer service, social media, and marketing.
Read more →
In statistics the mean squared prediction error (MSPE), also known as mean squared error of the predictions, of a smoothing, curve fitting, or regression procedure is the expected value of the squared prediction errors (PE), the square difference between the fitted values implied by the predictive function g ^ {\displaystyle {\widehat {g}}} and the values of the (unobservable) true value g. It is an inverse measure of the explanatory power of g ^ , {\displaystyle {\widehat {g}},} and can be used in the process of cross-validation of an estimated model. Knowledge of g would be required in order to calculate the MSPE exactly; in practice, MSPE is estimated. == Formulation == If the smoothing or fitting procedure has projection matrix (i.e., hat matrix) L, which maps the observed values vector y {\displaystyle y} to predicted values vector y ^ = L y , {\displaystyle {\hat {y}}=Ly,} then PE and MSPE are formulated as: P E i = g ( x i ) − g ^ ( x i ) , {\displaystyle \operatorname {PE_{i}} =g(x_{i})-{\widehat {g}}(x_{i}),} MSPE = E [ PE i 2 ] = ∑ i = 1 n PE i 2 / n . {\displaystyle \operatorname {MSPE} =\operatorname {E} \left[\operatorname {PE} _{i}^{2}\right]=\sum _{i=1}^{n}\operatorname {PE} _{i}^{2}/n.} The MSPE can be decomposed into two terms: the squared bias (mean error) of the fitted values and the variance of the fitted values: MSPE = ME 2 + VAR , {\displaystyle \operatorname {MSPE} =\operatorname {ME} ^{2}+\operatorname {VAR} ,} ME = E [ g ^ ( x i ) − g ( x i ) ] {\displaystyle \operatorname {ME} =\operatorname {E} \left[{\widehat {g}}(x_{i})-g(x_{i})\right]} VAR = E [ ( g ^ ( x i ) − E [ g ( x i ) ] ) 2 ] . {\displaystyle \operatorname {VAR} =\operatorname {E} \left[\left({\widehat {g}}(x_{i})-\operatorname {E} \left[{g}(x_{i})\right]\right)^{2}\right].} The quantity SSPE=nMSPE is called sum squared prediction error. The root mean squared prediction error is the square root of MSPE: RMSPE=√MSPE. == Computation of MSPE over out-of-sample data == The mean squared prediction error can be computed exactly in two contexts. First, with a data sample of length n, the data analyst may run the regression over only q of the data points (with q < n), holding back the other n – q data points with the specific purpose of using them to compute the estimated model’s MSPE out of sample (i.e., not using data that were used in the model estimation process). Since the regression process is tailored to the q in-sample points, normally the in-sample MSPE will be smaller than the out-of-sample one computed over the n – q held-back points. If the increase in the MSPE out of sample compared to in sample is relatively slight, that results in the model being viewed favorably. And if two models are to be compared, the one with the lower MSPE over the n – q out-of-sample data points is viewed more favorably, regardless of the models’ relative in-sample performances. The out-of-sample MSPE in this context is exact for the out-of-sample data points that it was computed over, but is merely an estimate of the model’s MSPE for the mostly unobserved population from which the data were drawn. Second, as time goes on more data may become available to the data analyst, and then the MSPE can be computed over these new data. == Estimation of MSPE over the population == When the model has been estimated over all available data with none held back, the MSPE of the model over the entire population of mostly unobserved data can be estimated as follows. For the model y i = g ( x i ) + σ ε i {\displaystyle y_{i}=g(x_{i})+\sigma \varepsilon _{i}} where ε i ∼ N ( 0 , 1 ) {\displaystyle \varepsilon _{i}\sim {\mathcal {N}}(0,1)} , one may write n ⋅ MSPE ( L ) = g T ( I − L ) T ( I − L ) g + σ 2 tr [ L T L ] . {\displaystyle n\cdot \operatorname {MSPE} (L)=g^{\text{T}}(I-L)^{\text{T}}(I-L)g+\sigma ^{2}\operatorname {tr} \left[L^{\text{T}}L\right].} Using in-sample data values, the first term on the right side is equivalent to ∑ i = 1 n ( E [ g ( x i ) − g ^ ( x i ) ] ) 2 = E [ ∑ i = 1 n ( y i − g ^ ( x i ) ) 2 ] − σ 2 tr [ ( I − L ) T ( I − L ) ] . {\displaystyle \sum _{i=1}^{n}\left(\operatorname {E} \left[g(x_{i})-{\widehat {g}}(x_{i})\right]\right)^{2}=\operatorname {E} \left[\sum _{i=1}^{n}\left(y_{i}-{\widehat {g}}(x_{i})\right)^{2}\right]-\sigma ^{2}\operatorname {tr} \left[\left(I-L\right)^{T}\left(I-L\right)\right].} Thus, n ⋅ MSPE ( L ) = E [ ∑ i = 1 n ( y i − g ^ ( x i ) ) 2 ] − σ 2 ( n − tr [ L ] ) . {\displaystyle n\cdot \operatorname {MSPE} (L)=\operatorname {E} \left[\sum _{i=1}^{n}\left(y_{i}-{\widehat {g}}(x_{i})\right)^{2}\right]-\sigma ^{2}\left(n-\operatorname {tr} \left[L\right]\right).} If σ 2 {\displaystyle \sigma ^{2}} is known or well-estimated by σ ^ 2 {\displaystyle {\widehat {\sigma }}^{2}} , it becomes possible to estimate MSPE by n ⋅ M S P E ^ ( L ) = ∑ i = 1 n ( y i − g ^ ( x i ) ) 2 − σ ^ 2 ( n − tr [ L ] ) . {\displaystyle n\cdot \operatorname {\widehat {MSPE}} (L)=\sum _{i=1}^{n}\left(y_{i}-{\widehat {g}}(x_{i})\right)^{2}-{\widehat {\sigma }}^{2}\left(n-\operatorname {tr} \left[L\right]\right).} Colin Mallows advocated this method in the construction of his model selection statistic Cp, which is a normalized version of the estimated MSPE: C p = ∑ i = 1 n ( y i − g ^ ( x i ) ) 2 σ ^ 2 − n + 2 p . {\displaystyle C_{p}={\frac {\sum _{i=1}^{n}\left(y_{i}-{\widehat {g}}(x_{i})\right)^{2}}{{\widehat {\sigma }}^{2}}}-n+2p.} where p the number of estimated parameters p and σ ^ 2 {\displaystyle {\widehat {\sigma }}^{2}} is computed from the version of the model that includes all possible regressors. That concludes this proof.
Read more →
Breakup Notifier was a web application written by product developer and programmer Dan Loewenherz that enabled its registered users to track the relationship status of their Facebook friends. An email notification was sent to the user when one of their Facebook friends changed their relationship status. The app was one of the most viral Facebook app's at the time of its release. It was mentioned in a skit on The Jay Leno Show and news of its popularity was published in Time magazine, The New York Post, CNET, and The Globe and Mail. == Popularity and Facebook controversy == Breakup Notifier gathered 100,000 users in less than 24 hours of its launch and reached a user base of more than 3,000,000 in February 2011. Facebook then blocked the app. Loewenherz later created an app named Crush Notifier, which differs from the original app in that users can check if they have a mutual crush. Breakup Notifier was later unblocked by Facebook and monetized.
Read more →
Multilinear principal component analysis (MPCA) is a multilinear extension of principal component analysis (PCA) that is used to analyze M-way arrays, also informally referred to as "data tensors". M-way arrays may be modeled by linear tensor models, such as CANDECOMP/Parafac, or by multilinear tensor models, such as multilinear principal component analysis (MPCA) or multilinear (tensor) independent component analysis (MICA). In 2005, Vasilescu and Terzopoulos introduced the Multilinear PCA terminology as a way to better differentiate between multilinear data models that employed 2nd order statistics versus higher order statistics to compute a set of independent components for each mode, such as Multilinear ICA Multilinear PCA may be applied to compute the causal factors of data formation, or as signal processing tool on data tensors whose individual observation have either been vectorized, or whose observations are treated as a collection of column/row observations, an "observation as a matrix", and concatenated into a data tensor. The latter approach is suitable for compression and reducing redundancy in the rows, columns and fibers that are unrelated to the causal factors of data formation. Vasilescu and Terzopoulos in their paper "TensorFaces" introduced the M-mode SVD algorithm which are algorithms misidentified in the literature as the HOSVD or the Tucker which employ the power method or gradient descent, respectively. Vasilescu and Terzopoulos framed the data analysis, recognition and synthesis problems as multilinear tensor problems. Data is viewed as the compositional consequence of several causal factors, that are well suited for multi-modal tensor factor analysis. The power of the tensor framework was showcased by analyzing human motion joint angles, facial images or textures in the following papers: Human Motion Signatures (CVPR 2001, ICPR 2002), face recognition – TensorFaces, (ECCV 2002, CVPR 2003, etc.) and computer graphics – TensorTextures (Siggraph 2004). == The algorithm == The MPCA solution follows the alternating least square (ALS) approach. It is iterative in nature. As in PCA, MPCA works on centered data. Centering is a little more complicated for tensors, and it is problem dependent. == Feature selection == MPCA features: Supervised MPCA is employed in causal factor analysis that facilitates object recognition while a semi-supervised MPCA feature selection is employed in visualization tasks. == Extensions == Various extension of MPCA: Robust MPCA (RMPCA) Multi-Tensor Factorization, that also finds the number of components automatically (MTF)
Read more →
Relief is an algorithm developed by Kenji Kira and Larry Rendell in 1992 that takes a filter-method approach to feature selection that is notably sensitive to feature interactions. It was originally designed for application to binary classification problems with discrete or numerical features. Relief calculates a feature score for each feature which can then be applied to rank and select top scoring features for feature selection. Alternatively, these scores may be applied as feature weights to guide downstream modeling. Relief feature scoring is based on the identification of feature value differences between nearest neighbor instance pairs. If a feature value difference is observed in a neighboring instance pair with the same class (a 'hit'), the feature score decreases. Alternatively, if a feature value difference is observed in a neighboring instance pair with different class values (a 'miss'), the feature score increases. The original Relief algorithm has since inspired a family of Relief-based feature selection algorithms (RBAs), including the ReliefF algorithm. Beyond the original Relief algorithm, RBAs have been adapted to (1) perform more reliably in noisy problems, (2) generalize to multi-class problems (3) generalize to numerical outcome (i.e. regression) problems, and (4) to make them robust to incomplete (i.e. missing) data. To date, the development of RBA variants and extensions has focused on four areas; (1) improving performance of the 'core' Relief algorithm, i.e. examining strategies for neighbor selection and instance weighting, (2) improving scalability of the 'core' Relief algorithm to larger feature spaces through iterative approaches, (3) methods for flexibly adapting Relief to different data types, and (4) improving Relief run efficiency. Their strengths are that they are not dependent on heuristics, they run in low-order polynomial time, and they are noise-tolerant and robust to feature interactions, as well as being applicable for binary or continuous data; however, it does not discriminate between redundant features, and low numbers of training instances fool the algorithm. == Relief Algorithm == Take a data set with n instances of p features, belonging to two known classes. Within the data set, each feature should be scaled to the interval [0 1] (binary data should remain as 0 and 1). The algorithm will be repeated m times. Start with a p-long weight vector (W) of zeros. At each iteration, take the feature vector (X) belonging to one random instance, and the feature vectors of the instance closest to X (by Euclidean distance) from each class. The closest same-class instance is called 'near-hit', and the closest different-class instance is called 'near-miss'. Update the weight vector such that W i = W i − ( x i − n e a r H i t i ) 2 + ( x i − n e a r M i s s i ) 2 , {\displaystyle W_{i}=W_{i}-(x_{i}-\mathrm {nearHit} _{i})^{2}+(x_{i}-\mathrm {nearMiss} _{i})^{2},} where i {\displaystyle i} indexes the components and runs from 1 to p. Thus the weight of any given feature decreases if it differs from that feature in nearby instances of the same class more than nearby instances of the other class, and increases in the reverse case. After m iterations, divide each element of the weight vector by m. This becomes the relevance vector. Features are selected if their relevance is greater than a threshold τ. Kira and Rendell's experiments showed a clear contrast between relevant and irrelevant features, allowing τ to be determined by inspection. However, it can also be determined by Chebyshev's inequality for a given confidence level (α) that a τ of 1/sqrt(αm) is good enough to make the probability of a Type I error less than α, although it is stated that τ can be much smaller than that. Relief was also described as generalizable to multinomial classification by decomposition into a number of binary problems. == ReliefF Algorithm == Kononenko et al. propose a number of updates to Relief. Firstly, they find the near-hit and near-miss instances using the Manhattan (L1) norm rather than the Euclidean (L2) norm, although the rationale is not specified. Furthermore, they found taking the absolute differences between xi and near-hiti, and xi and near-missi to be sufficient when updating the weight vector (rather than the square of those differences). === Reliable probability estimation === Rather than repeating the algorithm m times, implement it exhaustively (i.e. n times, once for each instance) for relatively small n (up to one thousand). Furthermore, rather than finding the single nearest hit and single nearest miss, which may cause redundant and noisy attributes to affect the selection of the nearest neighbors, ReliefF searches for k nearest hits and misses and averages their contribution to the weights of each feature. k can be tuned for any individual problem. === Incomplete data === In ReliefF, the contribution of missing values to the feature weight is determined using the conditional probability that two values should be the same or different, approximated with relative frequencies from the data set. This can be calculated if one or both features are missing. === Multi-class problems === Rather than use Kira and Rendell's proposed decomposition of a multinomial classification into a number of binomial problems, ReliefF searches for k near misses from each different class and averages their contributions for updating W, weighted with the prior probability of each class. == Other Relief-based Algorithm Extensions/Derivatives == The following RBAs are arranged chronologically from oldest to most recent. They include methods for improving (1) the core Relief algorithm concept, (2) iterative approaches for scalability, (3) adaptations to different data types, (4) strategies for computational efficiency, or (5) some combination of these goals. For more on RBAs see these book chapters or this most recent review paper. === RRELIEFF === Robnik-Šikonja and Kononenko propose further updates to ReliefF, making it appropriate for regression. === Relieved-F === Introduced deterministic neighbor selection approach and a new approach for incomplete data handling. === Iterative Relief === Implemented method to address bias against non-monotonic features. Introduced the first iterative Relief approach. For the first time, neighbors were uniquely determined by a radius threshold and instances were weighted by their distance from the target instance. === I-RELIEF === Introduced sigmoidal weighting based on distance from target instance. All instance pairs (not just a defined subset of neighbors) contributed to score updates. Proposed an on-line learning variant of Relief. Extended the iterative Relief concept. Introduced local-learning updates between iterations for improved convergence. === TuRF (a.k.a. Tuned ReliefF) === Specifically sought to address noise in large feature spaces through the recursive elimination of features and the iterative application of ReliefF. === Evaporative Cooling ReliefF === Similarly seeking to address noise in large feature spaces. Utilized an iterative `evaporative' removal of lowest quality features using ReliefF scores in association with mutual information. === EReliefF (a.k.a. Extended ReliefF) === Addressing issues related to incomplete and multi-class data. === VLSReliefF (a.k.a. Very Large Scale ReliefF) === Dramatically improves the efficiency of detecting 2-way feature interactions in very large feature spaces by scoring random feature subsets rather than the entire feature space. === ReliefMSS === Introduced calculation of feature weights relative to average feature 'diff' between instance pairs. === SURF === SURF identifies nearest neighbors (both hits and misses) based on a distance threshold from the target instance defined by the average distance between all pairs of instances in the training data. Results suggest improved power to detect 2-way epistatic interactions over ReliefF. === SURF (a.k.a. SURFStar) === SURF extends the SURF algorithm to not only utilized 'near' neighbors in scoring updates, but 'far' instances as well, but employing inverted scoring updates for 'far instance pairs. Results suggest improved power to detect 2-way epistatic interactions over SURF, but an inability to detect simple main effects (i.e. univariate associations). === SWRF === SWRF extends the SURF algorithm adopting sigmoid weighting to take distance from the threshold into account. Also introduced a modular framework for further developing RBAs called MoRF. === MultiSURF (a.k.a. MultiSURFStar) === MultiSURF extends the SURF algorithm adapting the near/far neighborhood boundaries based on the average and standard deviation of distances from the target instance to all others. MultiSURF uses the standard deviation to define a dead-band zone where 'middle-distance' instances do not contribute to scoring. Evidence suggests MultiSURF performs best in detecting pure 2-way feature interactions. === Reli
Read more →
In statistics, sufficient dimension reduction (SDR) is a paradigm for analyzing data that combines the ideas of dimension reduction with the concept of sufficiency. Dimension reduction has long been a primary goal of regression analysis. Given a response variable y and a p-dimensional predictor vector x {\displaystyle {\textbf {x}}} , regression analysis aims to study the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} , the conditional distribution of y {\displaystyle y} given x {\displaystyle {\textbf {x}}} . A dimension reduction is a function R ( x ) {\displaystyle R({\textbf {x}})} that maps x {\displaystyle {\textbf {x}}} to a subset of R k {\displaystyle \mathbb {R} ^{k}} , k < p, thereby reducing the dimension of x {\displaystyle {\textbf {x}}} . For example, R ( x ) {\displaystyle R({\textbf {x}})} may be one or more linear combinations of x {\displaystyle {\textbf {x}}} . A dimension reduction R ( x ) {\displaystyle R({\textbf {x}})} is said to be sufficient if the distribution of y ∣ R ( x ) {\displaystyle y\mid R({\textbf {x}})} is the same as that of y ∣ x {\displaystyle y\mid {\textbf {x}}} . In other words, no information about the regression is lost in reducing the dimension of x {\displaystyle {\textbf {x}}} if the reduction is sufficient. == Graphical motivation == In a regression setting, it is often useful to summarize the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} graphically. For instance, one may consider a scatterplot of y {\displaystyle y} versus one or more of the predictors or a linear combination of the predictors. A scatterplot that contains all available regression information is called a sufficient summary plot. When x {\displaystyle {\textbf {x}}} is high-dimensional, particularly when p ≥ 3 {\displaystyle p\geq 3} , it becomes increasingly challenging to construct and visually interpret sufficiency summary plots without reducing the data. Even three-dimensional scatter plots must be viewed via a computer program, and the third dimension can only be visualized by rotating the coordinate axes. However, if there exists a sufficient dimension reduction R ( x ) {\displaystyle R({\textbf {x}})} with small enough dimension, a sufficient summary plot of y {\displaystyle y} versus R ( x ) {\displaystyle R({\textbf {x}})} may be constructed and visually interpreted with relative ease. Hence sufficient dimension reduction allows for graphical intuition about the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} , which might not have otherwise been available for high-dimensional data. Most graphical methodology focuses primarily on dimension reduction involving linear combinations of x {\displaystyle {\textbf {x}}} . The rest of this article deals only with such reductions. == Dimension reduction subspace == Suppose R ( x ) = A T x {\displaystyle R({\textbf {x}})=A^{T}{\textbf {x}}} is a sufficient dimension reduction, where A {\displaystyle A} is a p × k {\displaystyle p\times k} matrix with rank k ≤ p {\displaystyle k\leq p} . Then the regression information for y ∣ x {\displaystyle y\mid {\textbf {x}}} can be inferred by studying the distribution of y ∣ A T x {\displaystyle y\mid A^{T}{\textbf {x}}} , and the plot of y {\displaystyle y} versus A T x {\displaystyle A^{T}{\textbf {x}}} is a sufficient summary plot. Without loss of generality, only the space spanned by the columns of A {\displaystyle A} need be considered. Let η {\displaystyle \eta } be a basis for the column space of A {\displaystyle A} , and let the space spanned by η {\displaystyle \eta } be denoted by S ( η ) {\displaystyle {\mathcal {S}}(\eta )} . It follows from the definition of a sufficient dimension reduction that F y ∣ x = F y ∣ η T x , {\displaystyle F_{y\mid x}=F_{y\mid \eta ^{T}x},} where F {\displaystyle F} denotes the appropriate distribution function. Another way to express this property is y ⊥ ⊥ x ∣ η T x , {\displaystyle y\perp \!\!\!\perp {\textbf {x}}\mid \eta ^{T}{\textbf {x}},} or y {\displaystyle y} is conditionally independent of x {\displaystyle {\textbf {x}}} , given η T x {\displaystyle \eta ^{T}{\textbf {x}}} . Then the subspace S ( η ) {\displaystyle {\mathcal {S}}(\eta )} is defined to be a dimension reduction subspace (DRS). === Structural dimensionality === For a regression y ∣ x {\displaystyle y\mid {\textbf {x}}} , the structural dimension, d {\displaystyle d} , is the smallest number of distinct linear combinations of x {\displaystyle {\textbf {x}}} necessary to preserve the conditional distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} . In other words, the smallest dimension reduction that is still sufficient maps x {\displaystyle {\textbf {x}}} to a subset of R d {\displaystyle \mathbb {R} ^{d}} . The corresponding DRS will be d-dimensional. === Minimum dimension reduction subspace === A subspace S {\displaystyle {\mathcal {S}}} is said to be a minimum DRS for y ∣ x {\displaystyle y\mid {\textbf {x}}} if it is a DRS and its dimension is less than or equal to that of all other DRSs for y ∣ x {\displaystyle y\mid {\textbf {x}}} . A minimum DRS S {\displaystyle {\mathcal {S}}} is not necessarily unique, but its dimension is equal to the structural dimension d {\displaystyle d} of y ∣ x {\displaystyle y\mid {\textbf {x}}} , by definition. If S {\displaystyle {\mathcal {S}}} has basis η {\displaystyle \eta } and is a minimum DRS, then a plot of y versus η T x {\displaystyle \eta ^{T}{\textbf {x}}} is a minimal sufficient summary plot, and it is (d + 1)-dimensional. == Central subspace == If a subspace S {\displaystyle {\mathcal {S}}} is a DRS for y ∣ x {\displaystyle y\mid {\textbf {x}}} , and if S ⊂ S drs {\displaystyle {\mathcal {S}}\subset {\mathcal {S}}_{\text{drs}}} for all other DRSs S drs {\displaystyle {\mathcal {S}}_{\text{drs}}} , then it is a central dimension reduction subspace, or simply a central subspace, and it is denoted by S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} . In other words, a central subspace for y ∣ x {\displaystyle y\mid {\textbf {x}}} exists if and only if the intersection ⋂ S drs {\textstyle \bigcap {\mathcal {S}}_{\text{drs}}} of all dimension reduction subspaces is also a dimension reduction subspace, and that intersection is the central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} . The central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} does not necessarily exist because the intersection ⋂ S drs {\textstyle \bigcap {\mathcal {S}}_{\text{drs}}} is not necessarily a DRS. However, if S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} does exist, then it is also the unique minimum dimension reduction subspace. === Existence of the central subspace === While the existence of the central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} is not guaranteed in every regression situation, there are some rather broad conditions under which its existence follows directly. For example, consider the following proposition from Cook (1998): Let S 1 {\displaystyle {\mathcal {S}}_{1}} and S 2 {\displaystyle {\mathcal {S}}_{2}} be dimension reduction subspaces for y ∣ x {\displaystyle y\mid {\textbf {x}}} . If x {\displaystyle {\textbf {x}}} has density f ( a ) > 0 {\displaystyle f(a)>0} for all a ∈ Ω x {\displaystyle a\in \Omega _{x}} and f ( a ) = 0 {\displaystyle f(a)=0} everywhere else, where Ω x {\displaystyle \Omega _{x}} is convex, then the intersection S 1 ∩ S 2 {\displaystyle {\mathcal {S}}_{1}\cap {\mathcal {S}}_{2}} is also a dimension reduction subspace. It follows from this proposition that the central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} exists for such x {\displaystyle {\textbf {x}}} . == Methods for dimension reduction == There are many existing methods for dimension reduction, both graphical and numeric. For example, sliced inverse regression (SIR) and sliced average variance estimation (SAVE) were introduced in the 1990s and continue to be widely used. Although SIR was originally designed to estimate an effective dimension reducing subspace, it is now understood that it estimates only the central subspace, which is generally different. More recent methods for dimension reduction include likelihood-based sufficient dimension reduction, estimating the central subspace based on the inverse third moment (or kth moment), estimating the central solution space, graphical regression, envelope model, and the principal support vector machine. For more details on these and other methods, consult the statistical literature. Principal components analysis (PCA) and similar methods for dimension reduction are not based on the sufficiency principle. === Example: linear regression === Consider the regression model y = α + β T x + ε , where ε ⊥ ⊥ x . {\displaystyle y=\alpha +\beta ^{T}{\textbf {x}}+\varepsilon ,{\text{ where }}\varepsilon \perp \!\!\!\perp {\textbf {x}}.} Note that the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} is the same as the distribution of y ∣ β T x {\displ
Read more →
The Text REtrieval Conference (TREC) is an ongoing series of workshops focusing on a list of different information retrieval (IR) research areas, or tracks. It is co-sponsored by the National Institute of Standards and Technology (NIST) and the Intelligence Advanced Research Projects Activity (part of the office of the Director of National Intelligence), and began in 1992 as part of the TIPSTER Text program. Its purpose is to support and encourage research within the information retrieval community by providing the infrastructure necessary for large-scale evaluation of text retrieval methodologies and to increase the speed of lab-to-product transfer of technology. TREC's evaluation protocols have improved many search technologies. A 2010 study estimated that "without TREC, U.S. Internet users would have spent up to 3.15 billion additional hours using web search engines between 1999 and 2009." Hal Varian the Chief Economist at Google wrote that "The TREC data revitalized research on information retrieval. Having a standard, widely available, and carefully constructed set of data laid the groundwork for further innovation in this field." Each track has a challenge wherein NIST provides participating groups with data sets and test problems. Depending on track, test problems might be questions, topics, or target extractable features. Uniform scoring is performed so the systems can be fairly evaluated. After evaluation of the results, a workshop provides a place for participants to collect together thoughts and ideas and present current and future research work.Text Retrieval Conference started in 1992, funded by DARPA (US Defense Advanced Research Project) and run by NIST. Its purpose was to support research within the information retrieval community by providing the infrastructure necessary for large-scale evaluation of text retrieval methodologies. == Goals == Encourage retrieval search based on large text collections Increase communication among industry, academia, and government by creating an open forum for the exchange of research ideas Speed the transfer of technology from research labs into commercial products by demonstrating substantial improvements retrieval methodologies on real world problems To increase the availability of appropriate evaluation techniques for use by industry and academia including development of new evaluation techniques more applicable to current systems TREC is overseen by a program committee consisting of representatives from government, industry, and academia. For each TREC, NIST provide a set of documents and questions. Participants run their own retrieval system on the data and return to NIST a list of retrieved top-ranked documents. NIST pools the individual result judges the retrieved documents for correctness and evaluates the results. The TREC cycle ends with a workshop that is a forum for participants to share their experiences. == Relevance judgments in TREC == TREC defines relevance as: "If you were writing a report on the subject of the topic and would use the information contained in the document in the report, then the document is relevant." Most TREC retrieval tasks use binary relevance: a document is either relevant or not relevant. Some TREC tasks use graded relevance, capturing multiple degrees of relevance. Most TREC collections are too large to perform complete relevance assessment; for these collections it is impossible to calculate the absolute recall for each query. To decide which documents to assess, TREC usually uses a method call pooling. In this method, the top-ranked n documents from each contributing run are aggregated, and the resulting document set is judged completely. == Various TRECs == In 1992 TREC-1 was held at NIST. The first conference attracted 28 groups of researchers from academia and industry. It demonstrated a wide range of different approaches to the retrieval of text from large document collections .Finally TREC1 revealed the facts that automatic construction of queries from natural language query statements seems to work. Techniques based on natural language processing were no better no worse than those based on vector or probabilistic approach. TREC2 Took place in August 1993. 31 group of researchers participated in this. Two types of retrieval were examined. Retrieval using an ‘ad hoc’ query and retrieval using a ‘routing' query In TREC-3 a small group experiments worked with Spanish language collection and others dealt with interactive query formulation in multiple databases TREC-4 they made even shorter to investigate the problems with very short user statements TREC-5 includes both short and long versions of the topics with the goal of carrying out deeper investigation into which types of techniques work well on various lengths of topics In TREC-6 Three new tracks speech, cross language, high precision information retrieval were introduced. The goal of cross language information retrieval is to facilitate research on system that are able to retrieve relevant document regardless of language of the source document TREC-7 contained seven tracks out of which two were new Query track and very large corpus track. The goal of the query track was to create a large query collection TREC-8 contain seven tracks out of which two –question answering and web tracks were new. The objective of QA query is to explore the possibilities of providing answers to specific natural language queries TREC-9 Includes seven tracks In TREC-10 Video tracks introduced Video tracks design to promote research in content based retrieval from digital video In TREC-11 Novelty tracks introduced. The goal of novelty track is to investigate systems abilities to locate relevant and new information within the ranked set of documents returned by a traditional document retrieval system TREC-12 held in 2003 added three new tracks; Genome track, robust retrieval track, HARD (Highly Accurate Retrieval from Documents) == Tracks == === Current tracks === New tracks are added as new research needs are identified, this list is current for TREC 2018. CENTRE Track – Goal: run in parallel CLEF 2018, NTCIR-14, TREC 2018 to develop and tune an IR reproducibility evaluation protocol (new track for 2018). Common Core Track – Goal: an ad hoc search task over news documents. Complex Answer Retrieval (CAR) – Goal: to develop systems capable of answering complex information needs by collating information from an entire corpus. Incident Streams Track – Goal: to research technologies to automatically process social media streams during emergency situations (new track for TREC 2018). The News Track – Goal: partnership with The Washington Post to develop test collections in news environment (new for 2018). Precision Medicine Track – Goal: a specialization of the Clinical Decision Support track to focus on linking oncology patient data to clinical trials. Real-Time Summarization Track (RTS) – Goal: to explore techniques for real-time update summaries from social media streams. === Past tracks === Chemical Track – Goal: to develop and evaluate technology for large scale search in chemistry-related documents, including academic papers and patents, to better meet the needs of professional searchers, and specifically patent searchers and chemists. Clinical Decision Support Track – Goal: to investigate techniques for linking medical cases to information relevant for patient care Contextual Suggestion Track – Goal: to investigate search techniques for complex information needs that are highly dependent on context and user interests. Crowdsourcing Track – Goal: to provide a collaborative venue for exploring crowdsourcing methods both for evaluating search and for performing search tasks. Genomics Track – Goal: to study the retrieval of genomic data, not just gene sequences but also supporting documentation such as research papers, lab reports, etc. Last ran on TREC 2007. Dynamic Domain Track – Goal: to investigate domain-specific search algorithms that adapt to the dynamic information needs of professional users as they explore in complex domains. Enterprise Track – Goal: to study search over the data of an organization to complete some task. Last ran on TREC 2008. Entity Track – Goal: to perform entity-related search on Web data. These search tasks (such as finding entities and properties of entities) address common information needs that are not that well modeled as ad hoc document search. Cross-Language Track – Goal: to investigate the ability of retrieval systems to find documents topically regardless of source language. After 1999, this track spun off into CLEF. FedWeb Track – Goal: to select best resources to forward a query to, and merge the results so that most relevant are on the top. Federated Web Search Track – Goal: to investigate techniques for the selection and combination of search results from a large number of real on-line web search services. Filtering Track – Goal: to binarily decide retrieval of new
Read more →
Structured k-nearest neighbours (SkNN) is a machine learning algorithm that generalizes k-nearest neighbors (k-NN). k-NN supports binary classification, multiclass classification, and regression, whereas SkNN allows training of a classifier for general structured output. For instance, a data sample might be a natural language sentence, and the output could be an annotated parse tree. Training a classifier consists of showing many instances of ground truth sample-output pairs. After training, the SkNN model is able to predict the corresponding output for new, unseen sample instances; that is, given a natural language sentence, the classifier can produce the most likely parse tree. == Training == As a training set, SkNN accepts sequences of elements with class labels. The type of element does not matter; the only requirement is a defined metric function that gives a distance between each pair of elements of a set. SkNN is based on idea of creating a graph, with each node representing a class label. There is an edge between a pair of nodes if there is a sequence of two elements in the training set with corresponding classes. The first step of SkNN training is the construction of such a graph from training sequences. There are two special nodes in the graph corresponding to sentence beginnings and ends: if a sequence starts with class C, the edge between node START and node C should be created. Like regular k-NN, the second part of SkNN training consists of storing the elements of a training sequence in a certain way. Each element of the training sequences is stored in the node related to the class of the previous element in the sequence. Every first element is stored in the START node. == Inference == Labelling input sequences by SkNN consists of finding the sequence of transitions in the graph, starting from node START. Each transition corresponds to a single element of the input sequence. As a result, the label of each element is determined as the target node label of the transition. The cost of the path is defined as the sum of all transitions, with the cost of transition from node A to node B being the distance from the current input sequence element to the nearest element of class B, stored in node A. Determining an optimal path may be performed using a modified Viterbi algorithm (where the sum of the distances is minimized, unlike the original algorithm which maximizes the product of probabilities).
Read more →
Multispectral remote sensing is the collection and analysis of reflected, emitted, or back-scattered energy from an object or an area of interest in multiple bands of regions of the electromagnetic spectrum (Jensen, 2005). Subcategories of multispectral remote sensing include hyperspectral, in which hundreds of bands are collected and analyzed, and ultraspectral remote sensing where many hundreds of bands are used (Logicon, 1997). The main purpose of multispectral imaging is the potential to classify the image using multispectral classification. This is a much faster method of image analysis than is possible by human interpretation. == Multispectral remote sensing systems == Remote sensing systems gather data via instruments typically carried on satellites in orbit around the Earth. The remote sensing scanner detects the energy that radiates from the object or area of interest. This energy is recorded as an analog electrical signal and converted into a digital value though an A-to-D conversion. There are several multispectral remote sensing systems that can be categorized in the following way: === Multispectral imaging using discrete detectors and scanning mirrors === Landsat Multispectral Scanner (MSS) Landsat Thematic Mapper (TM) NOAA Geostationary Operational Environmental Satellite (GOES) NOAA Advanced Very High Resolution Radiometer (AVHRR) NASA and ORBIMAGE, Inc., Sea-viewing Wide field-of-view Sensor (SeaWiFS) Daedalus, Inc., Aircraft Multispectral Scanner (AMS) NASA Airborne Terrestrial Applications Sensor (ATLAS) === Multispectral imaging using linear arrays === SPOT 1, 2, and 3 High Resolution Visible (HRV) sensors and Spot 4 and 5 High Resolution Visible Infrared (HRVIR) and vegetation sensor Indian Remote Sensing System (IRS) Linear Imaging Self-scanning Sensor (LISS) Space Imaging, Inc. (IKONOS) Digital Globe, Inc. (QuickBird) ORBIMAGE, Inc. (OrbView-3) ImageSat International, Inc. (EROS A1) NASA Terra Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) NASA Terra Multiangle Imaging Spectroradiometer (MISR) === Imaging spectrometry using linear and area arrays === NASA Jet Propulsion Laboratory Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) Compact Airborne Spectrographic Imager 3 (CASI 3) NASA Terra Moderate Resolution Imaging Spectrometer (MODIS) NASA Earth Observer (EO-1) Advanced Land Imager (ALI), Hyperion, and LEISA Atmospheric Corrector (LAC) === Satellite analog and digital photographic systems === Russian SPIN-2 TK-350, and KVR-1000 NASA Space Shuttle and International Space Station Imagery == Multispectral classification methods == A variety of methods can be used for the multispectral classification of images: Algorithms based on parametric and nonparametric statistics that use ratio-and interval-scaled data and nonmetric methods that can also incorporate nominal scale data (Duda et al., 2001), Supervised or unsupervised classification logic, Hard or soft (fuzzy) set classification logic to create hard or fuzzy thematic output products, Per-pixel or object-oriented classification logic, and Hybrid approaches == Supervised classification == In this classification method, the identity and location of some of the land-cover types are obtained beforehand from a combination of fieldwork, interpretation of aerial photography, map analysis, and personal experience. The analyst would locate sites that have similar characteristics to the known land-cover types. These areas are known as training sites because the known characteristics of these sites are used to train the classification algorithm for eventual land-cover mapping of the remainder of the image. Multivariate statistical parameters (means, standard deviations, covariance matrices, correlation matrices, etc.) are calculated for each training site. All pixels inside and outside of the training sites are evaluated and allocated to the class with the more similar characteristics. === Classification scheme === The first step in the supervised classification method is to identify the land-cover and land-use classes to be used. Land-cover refers to the type of material present on the site (e.g. water, crops, forest, wet land, asphalt, and concrete). Land-use refers to the modifications made by people to the land cover (e.g. agriculture, commerce, settlement). All classes should be selected and defined carefully to properly classify remotely sensed data into the correct land-use and/or land-cover information. To achieve this purpose, it is necessary to use a classification system that contains taxonomically correct definitions of classes. If a hard classification is desired, the following classes should be used: Mutually exclusive: there is not any taxonomic overlap of any classes (i.e., rain forest and evergreen forest are distinct classes). Exhaustive: all land-covers in the area have been included. Hierarchical: sub-level classes (e.g., single-family residential, multiple-family residential) are created, allowing that these classes can be included in a higher category (e.g., residential). Some examples of hard classification schemes are: American Planning Association Land-Based Classification System United States Geological Survey Land-use/Land-cover Classification System for Use with Remote Sensor Data U.S. Department of the Interior Fish and Wildlife Service U.S. National Vegetation and Classification System International Geosphere-Biosphere Program IGBP Land Cover Classification System === Training sites === Once the classification scheme is adopted, the image analyst may select training sites in the image that are representative of the land-cover or land-use of interest. If the environment where the data was collected is relatively homogeneous, the training data can be used. If different conditions are found in the site, it would not be possible to extend the remote sensing training data to the site. To solve this problem, a geographical stratification should be done during the preliminary stages of the project. All differences should be recorded (e.g. soil type, water turbidity, crop species, etc.). These differences should be recorded on the imagery and the selection training sites made based on the geographical stratification of this data. The final classification map would be a composite of the individual stratum classifications. After the data are organized in different training sites, a measurement vector is created. This vector would contain the brightness values for each pixel in each band in each training class. The mean, standard deviation, variance-covariance matrix, and correlation matrix are calculated from the measurement vectors. Once the statistics from each training site are determined, the most effective bands for each class should be selected. The objective of this discrimination is to eliminate the bands that can provide redundant information. Graphical and statistical methods can be used to achieve this objective. Some of the graphic methods are: Bar graph spectral plots Cospectral mean vector plots Feature space plots Cospectral parallelepiped or ellipse plots === Classification algorithm === The last step in supervised classification is selecting an appropriate algorithm. The choice of a specific algorithm depends on the input data and the desired output. Parametric algorithms are based on the fact that the data is normally distributed. If the data is not normally distributed, nonparametric algorithms should be used. The more common nonparametric algorithms are: One-dimensional density slicing Parallelipiped Minimum distance Nearest-neighbor Expert system analysis Convolutional neural network == Unsupervised classification == Unsupervised classification (also known as clustering) is a method of partitioning remote sensor image data in multispectral feature space and extracting land-cover information. Unsupervised classification require less input information from the analyst compared to supervised classification because clustering does not require training data. This process consists in a series of numerical operations to search for the spectral properties of pixels. From this process, a map with m spectral classes is obtained. Using the map, the analyst tries to assign or transform the spectral classes into thematic information of interest (i.e. forest, agriculture, urban). This process may not be easy because some spectral clusters represent mixed classes of surface materials and may not be useful. The analyst has to understand the spectral characteristics of the terrain to be able to label clusters as a specific information class. There are hundreds of clustering algorithms. Two of the most conceptually simple algorithms are the chain method and the ISODATA method. === Chain method === The algorithm used in this method operates in a two-pass mode (it passes through the multispectral dataset two times. In the first pass, the program reads through the dataset and sequentially builds clusters (groups of p
Read more →