AI Headshot Enhancer

AI Headshot Enhancer — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Evaluation of binary classifiers

  Evaluation of a binary classifier typically assigns a numerical value, or values, to a classifier that represent its accuracy. An example is error rate, which measures how frequently the classifier makes a mistake. There are many metrics that can be used; different fields have different preferences. For example, in medicine sensitivity and specificity are often used, while in computer science precision and recall are preferred. An important distinction is between metrics that are independent of the prevalence or skew (how often each class occurs in the population), and metrics that depend on the prevalence – both types are useful, but they have very different properties. Often, evaluation is used to compare two methods of classification, so that one can be adopted and the other discarded. Such comparisons are more directly achieved by a form of evaluation that results in a single unitary metric rather than a pair of metrics. == Contingency table == Given a data set, a classification (the output of a classifier on that set) gives two numbers: the number of positives and the number of negatives, which add up to the total size of the set. To evaluate a classifier, one compares its output to another reference classification – ideally a perfect classification, but in practice the output of another gold standard test – and cross tabulates the data into a 2×2 contingency table, comparing the two classifications. One then evaluates the classifier relative to the gold standard by computing summary statistics of these 4 numbers. Generally these statistics will be scale invariant (scaling all the numbers by the same factor does not change the output), to make them independent of population size, which is achieved by using ratios of homogeneous functions, most simply homogeneous linear or homogeneous quadratic functions. Say we test some people for the presence of a disease. Some of these people have the disease, and our test correctly says they are positive. They are called true positives (TP). Some have the disease, but the test incorrectly claims they don't. They are called false negatives (FN). Some don't have the disease, and the test says they don't – true negatives (TN). Finally, there might be healthy people who have a positive test result – false positives (FP). These can be arranged into a 2×2 contingency table (confusion matrix), conventionally with the test result on the vertical axis and the actual condition on the horizontal axis. These numbers can then be totaled, yielding both a grand total and marginal totals. Totaling the entire table, the number of true positives, false negatives, true negatives, and false positives add up to 100% of the set. Totaling the columns (adding vertically) the number of true positives and false positives add up to 100% of the test positives, and likewise for negatives. Totaling the rows (adding horizontally), the number of true positives and false negatives add up to 100% of the condition positives (conversely for negatives). The basic marginal ratio statistics are obtained by dividing the 2×2=4 values in the table by the marginal totals (either rows or columns), yielding 2 auxiliary 2×2 tables, for a total of 8 ratios. These ratios come in 4 complementary pairs, each pair summing to 1, and so each of these derived 2×2 tables can be summarized as a pair of 2 numbers, together with their complements. Further statistics can be obtained by taking ratios of these ratios, ratios of ratios, or more complicated functions. The contingency table and the most common derived ratios are summarized below; see sequel for details. Note that the rows correspond to the condition actually being positive or negative (or classified as such by the gold standard), as indicated by the color-coding, and the associated statistics are prevalence-independent, while the columns correspond to the test being positive or negative, and the associated statistics are prevalence-dependent. There are analogous likelihood ratios for prediction values, but these are less commonly used, and not depicted above. == Pairs of metrics == Often accuracy is evaluated with a pair of metrics composed in a standard pattern. === Sensitivity and specificity === The fundamental prevalence-independent statistics are sensitivity and specificity. Sensitivity or True Positive Rate (TPR), also known as recall, is the proportion of people that tested positive and are positive (True Positive, TP) of all the people that actually are positive (Condition Positive, CP = TP + FN). It can be seen as the probability that the test is positive given that the patient is sick. With higher sensitivity, fewer actual cases of disease go undetected (or, in the case of the factory quality control, fewer faulty products go to the market). Specificity (SPC) or True Negative Rate (TNR) is the proportion of people that tested negative and are negative (True Negative, TN) of all the people that actually are negative (Condition Negative, CN = TN + FP). As with sensitivity, it can be looked at as the probability that the test result is negative given that the patient is not sick. With higher specificity, fewer healthy people are labeled as sick (or, in the factory case, fewer good products are discarded). The relationship between sensitivity and specificity, as well as the performance of the classifier, can be visualized and studied using the Receiver Operating Characteristic (ROC) curve. In theory, sensitivity and specificity are independent in the sense that it is possible to achieve 100% in both (such as in the red/blue ball example given above). In more practical, less contrived instances, however, there is usually a trade-off, such that they are inversely proportional to one another to some extent. This is because we rarely measure the actual thing we would like to classify; rather, we generally measure an indicator of the thing we would like to classify, referred to as a surrogate marker. The reason why 100% is achievable in the ball example is because redness and blueness is determined by directly detecting redness and blueness. However, indicators are sometimes compromised, such as when non-indicators mimic indicators or when indicators are time-dependent, only becoming evident after a certain lag time. The following example of a pregnancy test will make use of such an indicator. Modern pregnancy tests do not use the pregnancy itself to determine pregnancy status; rather, human chorionic gonadotropin is used, or hCG, present in the urine of gravid females, as a surrogate marker to indicate that a woman is pregnant. Because hCG can also be produced by a tumor, the specificity of modern pregnancy tests cannot be 100% (because false positives are possible). Also, because hCG is present in the urine in such small concentrations after fertilization and early embryogenesis, the sensitivity of modern pregnancy tests cannot be 100% (because false negatives are possible). === Positive and negative predictive values === In addition to sensitivity and specificity, the performance of a binary classification test can be measured with positive predictive value (PPV), also known as precision, and negative predictive value (NPV). The positive prediction value answers the question "If the test result is positive, how well does that predict an actual presence of disease?". It is calculated as TP/(TP + FP); that is, it is the proportion of true positives out of all positive results. The negative prediction value is the same, but for negatives, naturally. ==== Impact of prevalence on predictive values ==== Prevalence has a significant impact on prediction values. As an example, suppose there is a test for a disease with 99% sensitivity and 99% specificity. If 2000 people are tested and the prevalence (in the sample) is 50%, 1000 of them are sick and 1000 of them are healthy. Thus about 990 true positives and 990 true negatives are likely, with 10 false positives and 10 false negatives. The positive and negative prediction values would be 99%, so there can be high confidence in the result. However, if the prevalence is only 5%, so of the 2000 people only 100 are really sick, then the prediction values change significantly. The likely result is 99 true positives, 1 false negative, 1881 true negatives and 19 false positives. Of the 19+99 people tested positive, only 99 really have the disease – that means, intuitively, that given that a patient's test result is positive, there is only 84% chance that they really have the disease. On the other hand, given that the patient's test result is negative, there is only 1 chance in 1882, or 0.05% probability, that the patient has the disease despite the test result. === Precision and recall === Precision and recall can be interpreted as (estimated) conditional probabilities: Precision is given by P ( C = P | C ^ = P ) {\displaystyle P(C=P|{\hat {C}}=P)} while recall is given by P ( C ^ = P | C = P ) {\displaystyle P({\hat {C}}=P|C=P)} , where C ^ {\

  Read more →
• 

  Cipher

  In cryptography, a cipher (or cypher) is an algorithm for performing encryption or decryption—a series of well-defined steps that can be followed as a procedure. An alternative, less common term is encipherment. To encipher or encode is to convert information into cipher or code. In common parlance, "cipher" is synonymous with "code", as they are both a set of steps that encrypt a message; however, the concepts are distinct in cryptography, especially classical cryptography. Codes generally substitute different length strings of characters in the output, while ciphers generally substitute the same number of characters as are input. A code maps one meaning with another. Words and phrases can be coded as letters or numbers. Codes typically have direct meaning from input to key. Codes primarily function to save time. Ciphers are algorithmic. The given input must follow the cipher's process to be solved. Ciphers are commonly used to encrypt written information. Codes operated by substituting according to a large codebook which linked a random string of characters or numbers to a word or phrase. For example, "UQJHSE" could be the code for "Proceed to the following coordinates.". When using a cipher the original information is known as plaintext, and the encrypted form as ciphertext. The ciphertext message contains all the information of the plaintext message, but is not in a format readable by a human or computer without the proper mechanism to decrypt it. The operation of a cipher usually depends on a piece of auxiliary information, called a key (or, in traditional NSA parlance, a cryptovariable). The encrypting procedure is varied depending on the key, which changes the detailed operation of the algorithm. A key must be selected before using a cipher to encrypt a message, with some exceptions such as ROT13 and Atbash. Most modern ciphers can be categorized in several ways: By whether they work on blocks of symbols usually of a fixed size (block ciphers), or on a continuous stream of symbols (stream ciphers). By whether the same key is used for both encryption and decryption (symmetric key algorithms), or if a different key is used for each (asymmetric key algorithms). If the algorithm is symmetric, the key must be known to the recipient and sender and to no one else. If the algorithm is an asymmetric one, the enciphering key is different from, but closely related to, the deciphering key. If one key cannot be deduced from the other, the asymmetric key algorithm has the public/private key property and one of the keys may be made public without loss of confidentiality. == Etymology == Originating from the Sanskrit word for zero शून्य (śuṇya), via the Arabic word صفر (ṣifr), the word "cipher" spread to Europe as part of the Arabic numeral system during the Middle Ages. The Roman numeral system lacked the concept of zero, and this limited advances in mathematics. In this transition, the word was adopted into Medieval Latin as cifra, and then into Middle French as cifre. This eventually led to the English word cipher (also spelt cypher). One theory for how the term came to refer to encoding is that the concept of zero was confusing to Europeans, and so the term came to refer to a message or communication that was not easily understood. The term cipher was later also used to refer to any Arabic digit, or to calculation using them, so encoding text in the form of Arabic numerals is literally converting the text to "ciphers". == Versus codes == In casual contexts, "code" and "cipher" can typically be used interchangeably; however, the technical usages of the words refer to different concepts. Codes contain meaning; words and phrases are assigned to numbers or symbols, creating a shorter message. An example of this is the commercial telegraph code which was used to shorten long telegraph messages which resulted from entering into commercial contracts using exchanges of telegrams. Another example is given by whole word ciphers, which allow the user to replace an entire word with a symbol or character, much like the way written Japanese utilizes Kanji (meaning Chinese characters in Japanese) characters to supplement the native Japanese characters representing syllables. An example using English language with Kanji could be to replace "The quick brown fox jumps over the lazy dog" by "The quick brown 狐 jumps 上 the lazy 犬". Stenographers sometimes use specific symbols to abbreviate whole words. Ciphers, on the other hand, work at a lower level: the level of individual letters, small groups of letters, or, in modern schemes, individual bits and blocks of bits. Some systems used both codes and ciphers in one system, using superencipherment to increase the security. In some cases the terms codes and ciphers are used synonymously with substitution and transposition, respectively. Historically, cryptography was split into a dichotomy of codes and ciphers, while coding had its own terminology analogous to that of ciphers: "encoding, codetext, decoding" and so on. However, codes have a variety of drawbacks, including susceptibility to cryptanalysis and the difficulty of managing a cumbersome codebook. Because of this, codes have fallen into disuse in modern cryptography, and ciphers are the dominant technique. == Types == There are a variety of different types of encryption. Algorithms used earlier in the history of cryptography are substantially different from modern methods, and modern ciphers can be classified according to how they operate and whether they use one or two keys. === Historical === The Caesar Cipher is one of the earliest known cryptographic systems. Julius Caesar used a cipher that shifts the letters in the alphabet in place by three and wrapping the remaining letters to the front to write to Marcus Tullius Cicero in approximately 50 BC. Historical pen and paper ciphers used in the past are sometimes known as classical ciphers. They include simple substitution ciphers (such as ROT13) and transposition ciphers (such as a Rail Fence Cipher). For example, "GOOD DOG" can be encrypted as "PLLX XLP" where "L" substitutes for "O", "P" for "G", and "X" for "D" in the message. Transposition of the letters "GOOD DOG" can result in "DGOGDOO". These simple ciphers and examples are easy to crack, even without plaintext-ciphertext pairs. In the 1640s, the Parliamentarian commander, Edward Montagu, 2nd Earl of Manchester, developed ciphers to send coded messages to his allies during the English Civil War. The English theologian John Wilkins published a book in 1641 titled "Mercury, or The Secret and Swift Messenger" and described a musical cipher wherein letters of the alphabet were substituted for music notes. This species of melodic cipher was depicted in greater detail by author Abraham Rees in his book Cyclopædia (1778). Simple ciphers were replaced by polyalphabetic substitution ciphers (such as the Vigenère) which changed the substitution alphabet for every letter. For example, "GOOD DOG" can be encrypted as "PLSX TWF" where "L", "S", and "W" substitute for "O". With even a small amount of known or estimated plaintext, simple polyalphabetic substitution ciphers and letter transposition ciphers designed for pen and paper encryption are easy to crack. It is possible to create a secure pen and paper cipher based on a one-time pad, but these have other disadvantages. During the early twentieth century, electro-mechanical machines were invented to do encryption and decryption using transposition, polyalphabetic substitution, and a kind of "additive" substitution. In rotor machines, several rotor disks provided polyalphabetic substitution, while plug boards provided another substitution. Keys were easily changed by changing the rotor disks and the plugboard wires. Although these encryption methods were more complex than previous schemes and required machines to encrypt and decrypt, other machines such as the British Bombe were invented to crack these encryption methods. === Modern === Modern encryption methods can be divided by two criteria: by type of key used, and by type of input data. By type of key used ciphers are divided into: symmetric key algorithms (Private-key cryptography), where one same key is used for encryption and decryption, and asymmetric key algorithms (Public-key cryptography), where two different keys are used for encryption and decryption. In a symmetric key algorithm (e.g., DES and AES), the sender and receiver must have a shared key set up in advance and kept secret from all other parties; the sender uses this key for encryption, and the receiver uses the same key for decryption. The design of AES (Advanced Encryption System) was beneficial because it aimed to overcome the flaws in the design of the DES (Data encryption standard). AES's designer's claim that the common means of modern cipher cryptanalytic attacks are ineffective against AES due to its design structure. Ciphers can be distinguished into two types by the type o

  Read more →
• 

  Sex differences in social media use

  Men and women use social media in different ways and with different frequencies. In general, several researchers have found that women tend to use social network services (SNSs) more than men and primiarly to socialize. == Differences == === Predilection for usage === Many studies have found that women are more likely to use either specific SNSs such as Facebook or MySpace or SNSs in general. In 2015, 73% of online men and 80% of online women used social networking sites. The gap in gender differences has become less apparent in LinkedIn. In 2015 about 26 percent of online men and 25% of online women used the business-and employee-oriented networking site. Researchers who have examined the gender of users of multiple SNSs have found contradictory results. Hargittai's groundbreaking 2007 study examining race, gender, and other differences between undergraduate college student users of SNSs found that women were not only more likely to have used SNSes than men but that they were also more likely to have used many different services, including Facebook, MySpace, and Friendster; these differences persisted in several models and analyses. Although she only surveyed students at one institution – the University of Illinois at Chicago – Hargittai selected that institution intentionally as "an ideal location for studies of how different kinds of people use online sites and services." In contrast, data collected by the Pew Internet & American Life Project found that men were more likely to have multiple SNS profiles. Although the sample sizes of the two surveys are comparable – 1,650 Internet users in the Pew survey compared with 1,060 in Hargittai's survey – the data from the Pew survey are newer and arguably more representative of the entire adult United States population. Pinterest, Facebook, and Instagram attract more females. Picture sharing sites overall are very popular among women. Pinterest alone attracts three times as many female users than male. However, use of Pinterest by men has increased from 5% in 2012. Facebook attracts about 77% of women online. Instagram is also more likely to attract women. Men are more likely to participate in online forums like Reddit, Digg or Slashdot. One in five men claim to be a part of an online forum. === Uses === In general, women seem to use SNSs more to explicitly foster social connections. A study conducted by Pew research centers found that women were more avid users of social media. In November 2010, the gap between men and women was as high as 15%. Female participants in a multi-stage study conducted in 2007 to discover the motivations of Facebook users scored higher on scales for social connection and posting of photographs. Studies have also been conducted on the differences between females and males with regards to blogging. The Pew Research Center found that younger females are more likely to blog than males their own age, even males that are older than them. Similarly, in a study of blogs maintained in MySpace, women were found to be more likely to not only write blogs but also write about family, romantic relationships, friendships, and health in those blogs. A study of Swedish SNS users found that women were more likely to have expressions of friendship, specifically in the areas of (a) publishing photos of their friends, (b) specifically naming their best friends, and (c) writing poems to and about their friends. Women were also more likely to have expressions related to family relationships and romantic relationships. One of the key findings of this research is that those men who do have expressions of romantic relationships in their profile had expressions just as strong as the women. However, the researcher speculated that this may be in part due to a desire to publicly express heterosexual behaviors and mannerisms instead of merely expressing romantic feelings. A large-scale study of gender differences in MySpace found that both men and women tended to have a majority of female Friends, and both men and women tended to have a majority of female "Top" Friends in the site. A later study found women to author disproportionately many (public) comments in MySpace, but an investigation into the role of emotion in public MySpace comments found that women both give and receive stronger positive emotion. It was hypothesised that women are simply more effective at using social networking sites because they are better able to harness positive emotion. A study focused on the influence of gender and personality on individuals' use of online social networking websites such as Facebook, reported that men use social networking sites with the intention of forming new relationships, whereas, women use them more for relationship maintenance. In addition to this, women are more likely to use Facebook or MySpace to compare themselves to others and also to search for information. Men, however, are more likely to look at other people's profiles with in the intention to find friends. Women were less successful at actually finding new friends, but more successful at "maintaining existing relationships, making new relationships, using for academic purposes and following specific agenda". Similarly, men also self-reported this motivation "while women reported using them more for relationship maintenance". === Personality === OCEAN personality traits are known to systematically vary between human males and females. In one study, the same women were more extraverted and agreeable, such as less neurotic while on social media than offline. Other studies associated neuroticism with female use of social media. === Privacy === Privacy has been the primary topic of many studies of SNS users, and many of these studies have found differences between male and female SNS users, although some studies have found results contradictory to those found in other studies. Some researchers have found that women are more protective of their personal information and more likely to have private profiles. Other researchers have found that women are less likely to post some types of information. Acquisti and Gross found that women in their sample were less likely to reveal their sexual orientation, personal address, or cell phone number. This is similar to Pew Internet & American Life research of children users of SNSs that found that boys and girls presented different views of privacy and behaviors, with girls being more concerned about and restrictive of information such as city, town, last name, and cell phone number that could be used to locate them. At least one group of researchers has found that women are less likely to share information that "identifies them directly – last name, cell phone number, and address or home phone number," linking that resistance to women's greater concerns about "cyberstalking", "cyberbullying", and security problems. Despite these concerns about privacy, researchers have found that women are more likely to maintain up-to-date photos of themselves. Further, Kolek and Saunders found in their sample of college student Facebook users that women were more likely to not only post a photograph of themselves in their profile but that they were more likely to have a publicly viewable Facebook account (a contradictory finding compared to many other studies), post photos, and post photo albums. Women were more likely to have: (a) a publicly viewable Facebook account, (b) more photo albums, (c) more photos, (d) a photo of themselves as their profile picture, (e) positive references to alcohol, partying, or drugs, and (f) more positive references to or about the institution or institution-related activities. In general, women were more likely to disclose information about themselves in their Facebook profile, with the primary exception of sharing their telephone number. Similarly, female respondents to Strano's study were more likely to keep their profile photo recent and choose a photo that made them appear attractive, happy, and fun-loving. Citing several examples, Strano opined that there may also be a difference in how men and women Facebook users display and interpret profile photos depicting relationships. Privacy has also been a concern for the SnapChat app, which allows you to send messages either text or photo or video which then disappear. One study has shown that security is not a major concern for the majority of users and that most do not use Snapchat to send sensitive content (although up to 25% may do so experimentally). As part of their research almost no statistically significant gender differences were found. === Cyberbullying === Past research carried out to investigate if there are any gender differences in cyber-bullying has found that boys commit more cyber verbal bullying, cyber forgery and more violence based on hidden identity or presenting themselves as other person. === Mansplaining === A 2021 article found that mansplaining could be seen more prominent online rather than offl

  Read more →
• 

  AS2

  AS2 (Applicability Statement 2) is a specification on how to transport structured business-to-business data securely and reliably over the Internet. Security is achieved by using digital certificates and encryption. == Background == AS2 was created in 2002 by the IETF to replace AS1, which they created in the early 1990s. The adoption of AS2 grew rapidly throughout the early 2000s because major players in the retail and fast-moving consumer goods industries championed AS2. Walmart was the first major retailer to require its suppliers to use the AS2 protocol instead of relying on dial-up modems for ordering goods. Amazon, Target, Lowe's, Bed, Bath, & Beyond and thousands of others followed suit. Many other industries use the AS2 protocol, including healthcare, as AS2 meets legal HIPAA requirements. In some cases, AS2 is a way to bypass expensive value-added networks previously used for data interchange. == Technical overview == AS2 is specified in RFC 4130, and is based on HTTP and S/MIME. It was the second AS protocol developed and uses the same signing, encryption and MDN (as defined by RFC3798) conventions used in the original AS1 protocol introduced in the late 1990s by IETF. In other words: Files are encoded as "attachments" in a standardized S/MIME message (an AS2 message). AS2 does not specify the contents of the files. Usually, the file contents are in a standardized format that is separately agreed upon, such as XML or EDIFACT. AS2 messages are always sent using the HTTP or HTTPS protocol (Secure Sockets Layer — also known as SSL — is implied by HTTPS) and usually use the "POST" method (use of "GET" is rare). Messages can be signed, but do not have to be. Messages can be encrypted, but do not have to be. Messages may request a Message Disposition Notification (MDN) back if all went well, but do not have to request such a message. If the original AS2 message requested an MDN: Upon the receipt of the message and its successful decryption or signature validation (as necessary) a "success" MDN will be sent back to the original sender. This MDN is typically signed but never encrypted (unless temporarily encrypted in transit via HTTPS). Upon the receipt and successful verification of the signature on the MDN, the original sender will "know" that the recipient got their message (this provides the "Non-repudiation" element of AS2). If there are any problems receiving or interpreting the original AS2 message, a "failed" MDN may be sent back. However, part of the AS2 protocol states that the client must treat a lack of an MDN as a failure as well, so some AS2 receivers will not return an MDN in this case. Like any other AS file transfer, AS2 file transfers typically require both sides of the exchange to trade X.509 certificates and specific "trading partner" names before any transfers can take place. AS2 trading partner names can usually be any valid phrase. === MDN options === Unlike AS1 or AS3 file transfers, AS2 file transfers offer several "MDN return" options instead of the traditional options of "yes" or "no". Specifically, the choices are: ==== AS2 w/ "Sync" MDNs ==== Return Synchronous MDN via HTTP(S) ("AS2 Sync") - This popular option allows AS2 MDNs to be returned to AS2 message sender clients over the same HTTP connection they used to send the original message. This "MDN while you wait" capability makes "AS2 Sync" transfers the fastest of any type of AS file transfer, but it also keeps this flavor of MDN requests from being used with large files (which may time out in low-bandwidth situations). ==== AS2 w/ "ASync" MDNs ==== Return Asynchronous MDN via HTTP(S) (a.k.a. "AS2 Async") - This popular option allows AS2 MDNs to be returned to the AS2 message sender's server later over a different HTTP connection. This flavor of MDN request is usually used if large files are involved or if your trading partner's AS2 server has poor Internet service. ==== AS2 w/ "Email" MDNs ==== Return (Asynchronous) MDN via Email - This rarely used option allows AS2 MDNs to be returned to AS2 message senders via email rather than HTTP. Otherwise, it is similar to "AS2 Async (HTTP)". ==== AS2 w/ No MDNs ==== Do not return MDN - This option works like it does in any other AS protocol: the receiver of an AS2 message with this option set simply does not try to return an MDN to the AS2 message sender. ==== Filename preservation ==== AS2 filename preservation feature will be used to communicate the filename to the trading partner. The banking industry relies on filenames being communicated between trading partners. AS2 vendors are currently certifying that implementation of filename communication conforms to the standard and is interoperable. There are two profiles for filename preservation being optionally tested under AS2 testing: Filename preservation without MDN responses Filename preservation with an associated MDN response certification Walmart recommends contacting Drummond Group, LLC for more information on EDIINT AS2, or for a list of interoperable-testing AS2 software providers. == Benefits == For many businesses, the use of AS2 and electronic data interchange (EDI) is not a choice so much as it is a requirement of doing business with a large customer or partner. That said, AS2 is a universal protocol that has benefits, from both business and technology vantage points. === Business case === Cut costs by using the web for EDI file transfers, AS2 reduces the cost of transactions from expensive VANs. Extend EDI to more partners; with lower costs and universal web connectivity, AS2 allows organizations to implement EDI with partners worldwide that have little EDI infrastructure. Save time by eliminating the need to manually process orders. Eliminate errors by turning manual processes into automated processes. Universal solution — AS2 is established and tested, so no one has to re-invent the wheel. === Technological advantages === Leverage the web: if an organization can share data securely via the web, they already have much of the infrastructure for AS2. Unlimited EDI data — there are no practical limitations on transaction sizes via the web, and AS2 includes features for managing large transfers. Payload Agnostic — AS2 can be used to transport any type of document. While EDI X12, EDIFACT and XML are common, any mutually agreed-upon format may be transferred.

  Read more →
• 

  World Database of Happiness

  The World Database of Happiness is a web-based archive of research findings on subjective appreciation of life, based in the Erasmus Happiness Economics Research Organization of the Erasmus University Rotterdam in The Netherlands. The database contains both an overview of scientific publications on happiness and a digest of research findings. Happiness is defined as the degree to which an individual judges the quality of his or her life as a whole favorably. Two 'components' of happiness are distinguished: hedonic level of affect (the degree to which pleasant affect dominates) and contentment (perceived realization of wants). == Aims == The World Database of Happiness is a tool to quickly acquire an overview on the ever-growing stream of research findings on happiness Medio 2023 the database covered some 16,000 scientific publications on happiness, from which were extracted 23,000 distributional findings (on how happy people are) and another 24,000 correlational findings (on factors associated with more and less happiness). The first findings date from 1915. == Technique == The World Database of Happiness is a ‘findings archive’, which consists of electronic ‘finding pages’ on which separate research results are described in a standard format and terminology. These finding pages can be selected on various characteristics, such as population studies, the measure of happiness used and observed co-variates. All finding-pages have a specific internet address to which links can be made in scientific review papers or policy recommendations. This allows a concise presentation of many findings in a table, while providing readers with access to detail. == Scientific use == The Database has been cited in 254 scientific papers, for example to access under what conditions economic growth enhances average happiness or to show that rising mean happiness at first raises happiness inequality, but further rise will diminish these differences, or that healthy eating is associated with more happiness, even after controlling for the effect on health Another finding is that relative simple happiness training techniques raise happiness by some 5% == Popular use == The World Database of Happiness is often used by popular media to make lists of the happiest countries around the globe. An example is the Happy Planet Index, which aims to chart sustainable happiness all over the world by combining data on longevity, happiness and the size of the ecological footprint of citizens. == Strengths and weaknesses == The database has a clear conceptual focus, it includes only research findings on subjective enjoyment of one's life as a whole. Thereby it evades the Babel that has haunted the study of happiness for ages. The other side of that coin is that much interesting research is left out. The findings are reported with technical details about measurement and statistical analysis. This detail is welcomed by scholars, but makes the information difficult to digest for lay-persons. Still another limitation is that the determinants of happiness appear to vary considerably across persons and situations, which make it hard to draw general conclusions about the causes of happiness. What is clear is that poor health, separation, unemployment and lack of social contact are all strongly negatively associated with happiness. Another problem for the World database of happiness is that the studies on happiness increase with such a high rate that it gets increasingly difficult to offer a complete overview of all research findings. A further concern is that the Database of Happiness is exclusively focused on hedonic happiness (feeling good) and not on mature happiness that might exist in the face of suffering

  Read more →
• 

  Airborne Networking

  An Airborne Network (AN) is the infrastructure owned by the United States Air Force that provides communication transport services through at least one node that is on a platform capable of flight. == Background == === Definition === The intent of the US Air Force's Airborne Network is to expand the Global Information Grid (GIG) to connect the three major domains of warfare: Air, Space, and Terrestrial. The Transformational Satellite Communications System network currently provides connectivity for all communication through space assets. The Combat Information Transport System and Theater Deployable Communications provide terrestrial connectivity for theatre based operations. The Airborne Network is engineered to utilize all airborne assets to connect with space and surface networks building a seamless communications platform across all domains. === Capabilities === The capabilities identified by this type of system are vastly beyond that of our current military. This system will enable the Air Force to provide a transportable network, flexible enough to communicate with any air, space, or ground asset in the area. The network will provide a beyond line-of-sight (LoS) communications infrastructure that can be packed up and moved in and out of the designated battlespace, enabling the military to have a reliable and secure communications network that extends globally. The network is designed to be flexible enough to provide the right communication and network packages for a specific region, mission, or technology. Operationally, The AN is designed to be self-forming, self-organizing, and self-generating, with nodes joining and leaving the network as they enter and exit a specific region. The network consists of dedicated tactical links, wideband air-to-air links, and ad hoc networks constructed by the Joint Tactical Radio System (JTRS) networking services. JTRS is a software-defined radio that will work with many existing military and civilian radios. It includes integrated encryption and Wideband Networking Software to create mobile ad hoc networks. It also provides system performance analysis and fault diagnostics automatically, reducing the demand for human intervention and network maintenance. === Intended Use === The AN was designed as the cornerstone for the new military doctrine known as Network Centric Warfare. This doctrine was developed to use information superiority to equip warfighters with more precise information enabling commanders and shooters to make smarter decisions faster. The AN contributes to Network Centric Warfare by enabling commanders to provide real-time information to warfighters in the air and on the ground. Warfighters can then utilize more information and make more educated decisions about how to act in a particular situation. Once the act has been carried out commanders will have immediate information about the result and can make judgments on how to continue. All-in-all the AN was designed to reduce the time necessary to identify a target, make clear and educated decisions to pull or not to pull the trigger, and assess battle == Topologies == There are four main network topologies that will be deployed and vary based on the placement of backbone and subnet class networks. === Space, Air, Ground Tether === Establishing a direct connection to another aircraft or ground node, via a point-to-point link for nodes within LOS or via a Satellite Communications (SATCOM) link for nodes that are beyond line-of-sight is known as tethering. SATCOM links provide connectivity to a network ground entry point. Strike aircraft that accompany C2 aircraft such as an AWACS are tethered via point-to-point links. Finally, C2 or intelligence, surveillance, and reconnaissnce (ISR) aircraft may connect via a LOS link directly to a network ground entry point. Each of these tethered alternatives works exactly like a hub or switch that has an entry point to a larger network and allows their connected users access to that network. === Flat Ad Hoc === A flat ad hoc topology refers to establishing nonpersistent network connections as needed among AN nodes that are present at a given time. With this network the nodes dynamically “discover” other nodes to which they can interconnect and form the network. The specific interconnections between the nodes are not planned in advance, but are made as opportunities arise. The nodes join and leave the network at will, continually changing connections to neighbor nodes based upon their location and mobility characteristics. === Tiered Ad Hoc === Ad hoc networks can be flat in the sense that all nodes are peers of each other in a single network, as discussed above, or they can dynamically organize themselves into hierarchical tiers such that higher tiers are used to move data between more localized subnets. This network topology can be compared to any conventional deployed network that utilizes routers, switches, and hubs to temporarily connect users. === Persistent Backbone === A network topology characterized by a persistent backbone is established using relatively persistent wideband connections among high-value platforms flying relatively stable orbits. It provides the connectivity between the tactical subnets which are considered edge networks relative to the backbone. This provides concentration points for connectivity to the space backbone as well as to terrestrial networks. This type of network topology is comparable to a conventional permanent network with established data trunks, routers, switches, and hubs to connect users. == Architecture == === Network Management === The platform management system enables operators to manage all on-board network elements. It interfaces and interoperates with the Airborne Network management system to enable operators to manage remote network elements in the airborne network. The network management system monitors the health of the network by passively testing the network for faults and latency. The system will also actively troubleshoot faults with probes to identify and isolate faulty connections, and enables operators to apply network parameters and security changes to all systems based on the status of the network. === Routing/Switching === Routing and switching enables data to be dynamically transmitted over the network to other nodes. Routing protocols must be able to identify nodes transmitted within their own platform and data to be sent to other platforms regardless of the current topology. The routing protocol must also provide seamless roaming by ensuring that no routed packets are lost when a node changes its point of attachment to the network. Maintaining scalability is important in routing as the network is constantly changing. The network must be able to function with numerous levels of platforms, varying numbers of fast moving platforms, and varying amounts of traffic per platform. Routers and switches will use metrics to determine the best paths to take when routing data. The routing protocol utilized for the AN will be an Adaptive Quality of Service routing protocol. === Gateways/Proxies === Gateways and proxies enable the connection numerous technology types regardless of age to communicate across the IP-based network. Gateways and proxies are essential in the operation of this network because so many different technologies are used to communicate in each domain. These systems will facilitate the transition of the legacy on-board infrastructure, transmission systems, tactical data link systems, and user applications to the objective airborne network systems. Therefore, they are only temporary until all platforms use a standardized IP radio for transmission. === Performance Enhancing Proxies === Performance Enhancing Proxies improve the performance of user applications running across the Airborne Network by countering wireless network impairments, such as limited bandwidth, long delays, high loss rates, and disruptions in network connections. Proxy systems are implemented between the user application and the network and can be used to improve performance at the application and transport functional layers of the OSI model. Some techniques that can be employed include: Compression: Data compression or header compression can be used to minimize the number of bits sent over the network. Data bundling: Smaller data packets can be combined (bundled) into a single large packet for transmission over the network. Caching: A local cache can be used to save and provide data objects that are requested multiple times, reducing transmissions over the network (and improving response times). Store and forward: Message queuing can be used to ensure message delivery to users who become disconnected from the network or are unable to connect to the network for a period of time. Once the platform connects, the stored messages are sent. Pipelining: Rather than opening several separate network connections pipelining can be used to share a single networ

  Read more →
• 

  Data custodian

  In data governance groups, responsibilities for data management are increasingly divided between the business process owners and information technology (IT) departments. Two functional titles commonly used for these roles are data steward and data custodian. Data Stewards are commonly responsible for data content, context, and associated business rules. Data custodians are responsible for the safe custody, transport, storage of the data and implementation of business rules. Simply put, Data Stewards are responsible for what is stored in a data field, while data custodians are responsible for the technical environment and database structure. Common job titles for data custodians are database administrator (DBA), data modeler, ETL developer and data engineer. == Data custodian responsibilities == A data custodian ensures: Access to the data is authorized and controlled Data stewards are identified for each data set Technical processes sustain data integrity Processes exist for data quality issue resolution in partnership with data stewards Technical controls safeguard data Data added to data sets are consistent with the common data model Versions of master data are maintained along with the history of changes Change management practices are applied in maintenance of the database Data content and changes can be audited

  Read more →
• 

  List of cryptography journals

  List of cryptography journals includes notable peer-reviewed academic journals that focus on cryptography, cryptanalysis, information security, and related areas in computer science and mathematics. == Notable journals == Cryptologia Designs, Codes and Cryptography IEEE Transactions on Information Theory International Journal of Information Security Journal of Cryptology Journal of Computer Security ACM Transactions on Privacy and Security Information Processing Letters Information and Computation

  Read more →
• 

  Deep Learning Super Sampling

  Deep Learning Super Sampling (DLSS) is a suite of real-time deep learning image enhancement and upscaling technologies developed by Nvidia that are available in a number of video games. The goal of these technologies is to allow the majority of the graphics pipeline to run at a lower resolution for increased performance, and then infer a higher resolution image from this that approximates the same level of detail as if the image had been rendered at this higher resolution. This allows for higher graphical settings or frame rates for a given output resolution, depending on user preference. All generations of DLSS are available on all RTX-branded cards from Nvidia in supported titles. However, the Frame Generation feature is only supported on RTX 40 series GPUs or newer and Multi Frame Generation is only available on 50 series GPUs. == History == Nvidia advertised DLSS as a key feature of GeForce RTX 20 series GPUs when they launched in September 2018. At that time, the results were limited to a few video games, namely Battlefield V, or Metro Exodus, because the algorithm had to be trained specifically on each game on which it was applied and the results were usually not as good as simple resolution upscaling. In 2019, Control shipped with ray tracing and an image processing algorithm that approximated DLSS, which did not use the Tensor Cores. In April 2020, Nvidia advertised and shipped an improved version of DLSS named DLSS 2 with driver version 445.75. DLSS 2.0 was available for a few existing games including Control and Wolfenstein: Youngblood, and would later be added to many newly released games and game engines such as Unreal Engine and Unity. This time Nvidia said that it used the Tensor Cores again, and that the AI did not need to be trained specifically on each game. Despite sharing the DLSS branding, the two iterations of DLSS differ significantly and are not backwards-compatible. In January 2025, Nvidia stated that there are over 540 games and apps supporting DLSS, and that over 80% of Nvidia RTX users activate DLSS. In March 2025, there were more than 100 games that support DLSS 4, according to Nvidia. By May 2025, over 125 games supported DLSS 4. The first video game console to use DLSS, the Nintendo Switch 2, was released on June 5, 2025. Nvidia announced DLSS 4.5 at CES 2026. In January 2026, Nvidia stated that over 250 games and applications support Multi Frame Generation. On March 16, 2026, at GTC 2026, Nvidia CEO Jensen Huang presented DLSS 5, a real-time AI model based on neural rendering that realistically enhances lighting and material surfaces at up to 4K resolution while retaining the developer's intended art style. It is planned to release in fall of 2026. In a blog post on its website, Nvidia has announced that DLSS 5 will be available in such games as Assassin's Creed Shadows, Delta Force, Hogwarts Legacy, Naraka: Bladepoint, Phantom Blade Zero, Resident Evil Requiem, Starfield, The Elder Scrolls IV: Oblivion Remastered, and more. On May 31, 2026, Nvidia announced an updated version of Ray Reconstruction for DLSS 4.5 in a blog post, scheduled for release on all RTX GPUs in August of the same year. They said it is designed to better embed spatial awareness into scenes and analyze engine data on movements and lighting conditions, resulting in a sharper, more stable, and less noisy image. === Release timeline === == Technology == === DLSS 1 === The first iteration of DLSS is a predominantly spatial image upscaler with two stages, both relying on convolutional auto-encoder neural networks. The first step is an image enhancement network which uses the current frame and motion vectors to perform edge enhancement, and spatial anti-aliasing. The second stage is an image upscaling step which uses the single raw, low-resolution frame to upscale the image to the desired output resolution. Using just a single frame for upscaling means the neural network itself must generate a large amount of new information to produce the high-resolution output, which can result in slight hallucinations such as leaves that differ in style to the source content. The neural networks are trained on a per-game basis by generating a "perfect frame" using traditional supersampling to 64 samples per pixel, as well as the motion vectors for each frame. The data collected must be as comprehensive as possible, including as many levels, times of day, graphical settings, resolutions, etc. as possible. This data is also augmented using common augmentations such as rotations, colour changes, and random noise to help generalize the test data. Training is performed on Nvidia's Saturn V supercomputer. This first iteration received a mixed response, with many criticizing the often soft appearance and artifacts along with glitches in certain situations; likely a side effect of the limited data from only using a single frame input to the neural networks which could not be trained to perform optimally in all scenarios and edge-cases. Nvidia also demonstrated the ability for the auto-encoder networks to learn the ability to recreate depth-of-field and motion blur, although this functionality has never been included in a publicly released product. === DLSS 2 === DLSS 2 is a temporal anti-aliasing upsampling (TAAU) implementation, using data from previous frames extensively through sub-pixel jittering to resolve fine detail and reduce aliasing. The data DLSS 2 collects includes: the raw low-resolution input, motion vectors, depth buffers, and exposure / brightness information. It can also be used as a simpler TAA implementation where the image is rendered at 100% resolution, rather than being upsampled by DLSS, Nvidia brands this as DLAA (Deep Learning Anti-Aliasing). TAA(U) is used in many modern video games and game engines; however, all previous implementations have used some form of manually written heuristics to prevent temporal artifacts such as ghosting and flickering. One example of this is neighborhood clamping which forcefully prevents samples collected in previous frames from deviating too much compared to nearby pixels in newer frames. This helps to identify and fix many temporal artifacts, but deliberately removing fine details in this way is analogous to applying a blur filter, and thus the final image can appear blurry when using this method. DLSS 2 uses a convolutional auto-encoder neural network trained to identify and fix temporal artifacts, instead of manually programmed heuristics as mentioned above. Because of this, DLSS 2 can generally resolve detail better than other TAA and TAAU implementations, while also removing most temporal artifacts. This is why DLSS 2 can sometimes produce a sharper image than rendering at higher, or even native resolutions using traditional TAA. However, no temporal solution is perfect, and artifacts (ghosting in particular) are still visible in some scenarios when using DLSS 2. Because temporal artifacts occur in most art styles and environments in broadly the same way, the neural network that powers DLSS 2 does not need to be retrained when being used in different games. Despite this, Nvidia does frequently ship new minor revisions of DLSS 2 with new titles, so this could suggest some minor training optimizations may be performed as games are released, although Nvidia does not provide changelogs for these minor revisions to confirm this. The main advancements compared to DLSS 1 include: Significantly improved detail retention, a generalized neural network that does not need to be re-trained per-game, and ~2x less overhead (~1–2 ms vs ~2–4 ms). It should also be noted that forms of TAAU such as DLSS 2 are not upscalers in the same sense as techniques such as ESRGAN or DLSS 1, which attempt to create new information from a low-resolution source; instead, TAAU works to recover data from previous frames, rather than creating new data. In practice, this means low resolution textures in games will still appear low-resolution when using current TAAU techniques. This is why Nvidia recommends game developers use higher resolution textures than they would normally for a given rendering resolution by applying a mip-map bias when DLSS 2 is enabled. === DLSS 3 === Augments DLSS 2 with improved image quality and the introduction of a new motion interpolation feature, called Frame Generation. The DLSS Frame Generation algorithm takes two rendered frames from the rendering pipeline and generates a new frame that smoothly transitions between them. For every frame rendered, one additional frame is generated. DLSS 3.0 makes use of a new generation Optical Flow Accelerator (OFA) included in the Ada Lovelace architecture of GeForce RTX 40 series GPUs and with that is exclusive to them. The new OFA is said to be faster and more accurate than the one already available in previous Turing and Ampere RTX GPUs. === DLSS 3.5 === DLSS 3.5 adds Ray Reconstruction, replacing multiple denoising algorithms with a single AI model trained o

  Read more →
• 

  VK (service)

  VK (short for its original name VKontakte; Russian: ВКонтакте, lit. 'InContact') is a Russian online social media and social networking service based in Saint Petersburg. VK is available in multiple languages but it is predominantly used by Russian speakers. VK users can message each other publicly or privately, edit messages, create groups, public pages, and events; share and tag images, audio, and video; and play browser-based games. As of August 2018, VK had at least 500 million accounts. As of November 2022, it was the sixth most popular website in Russia. The network was also popular in Ukraine until it was banned by the Verkhovna Rada in 2017. According to Semrush, in 2024, VK was the 30th most visited website in the world; as YouTube is subject to blocking in Russia, VK Video overtook Google's top position in monthly web traffic for the first time in December 2024, as part of the major substitution to domestic business. == History == VKontakte was conceived in 2006 when Pavel Durov, creator of the popular student forum spbgu.ru, met his former classmate Vyacheslav Mirilashvili in St. Petersburg after graduating from the Faculty of Philology at St Petersburg State University. Vyacheslav showed Durov the increasingly popular Facebook, after which the friends decided to create a new Russian social network. Lev Leviev, an Israeli classmate of Vyacheslav Mirilashivili, became the third co-founder. Vyacheslav Mirilashvili borrowed the money from his billionaire father and became the largest shareholder. Lev Leviev took over operational management, and Durov became CEO. Pavel Durov convinced his older brother Nikolai, a multiple winner of international math and programming competitions, to develop the site. Durov launched VKontakte for beta testing in September 2006. The following month, the domain name Vkontakte.ru was registered. The new project was incorporated on 19 January 2007 as a Russian private limited company. In February 2007 the site reached a user base of over 100,000 and was recognized as the second largest company in Russia's nascent social network market. In the same month, the site was subjected to a severe DDoS attack, which briefly put it offline. The user base reached 1 million in July 2007, and 10 million in April 2008. In December 2008 VK overtook rival Odnoklassniki as Russia's most popular social networking service. == Website == Similar to many social networks, the platform's fundamental features revolve around private messaging, sharing photos, posting status updates, and exchanging links with friends. VK also provides tools for administering online communities and managing celebrity pages. The site allows its users to upload, search and stream media content, such as videos and music. VK features an advanced search engine, that allows complex queries for finding friends, as well as a real-time news search. VK updated its features and design in April 2016. === Features === Messaging. VK Private Messages can be exchanged between groups of 2 to 500 people. An email address can also be specified as the recipient. Each message may contain up to 10 attachments: Photos, Videos, Audio Files, Maps (an embedded map with a manually placed marker), and Documents. News. VK users can post on their profile walls, each post may contain up to 10 attachments – media files, maps, and documents (see above). User mentions and hashtags are supported. In the case of multiple photo attachments, the previews are automatically scaled and arranged in a magazine-style layout. The news feed can be switched between all news (default) and most interesting modes. The site features a news-recommendation engine, global real-time search, and individual search for posts and comments on specific users' walls. Communities. VK features three types of communities. Groups are better suited for decentralized communities (discussion boards, wiki-style articles, editable by all members, etc.). Public pages is a news feed-orientated broadcasting tool for celebrities and businesses. The two types are largely interchangeable, the main difference being in the default settings. The third type of community is called Events, which are used for appropriately organizing concerts and events in an appropriate way. Like buttons. VK like buttons for posts, comments, media, and external sites operate differently from Facebook. Liked content doesn't get automatically pushed to the user's wall, but is saved in the private Favorites section instead. The user has to press a second 'share with friends' button to share an item on their wall or send it via private message to a friend. Privacy. Users can control the availability of their content within the network and on the Internet. Blanket and granular privacy settings are available for pages and individual content. Synchronization with other social networks. Any news published on the VK wall will appear on Facebook or Twitter. Certain news may not be published by clicking on the logo next to the "Send" button. Editing a post in VK does not change the post in Facebook or Twitter and vice versa. However, removing the news in VK will remove it from other social networks. SMS service. Russian users can receive and reply to a private message or leave a comment for community news using SMS. Music. Users have access to the audio files uploaded by other users. In addition, users can upload the audio files themselves, create playlists and share audios with others by attaching to messages and wall posts. The uploaded audio files cannot violate copyright laws. === Popularity === As of May 2017, according to Alexa Internet ranking, VK is one of the most visited websites in some Eurasian countries. It is: 4th most visited in Russia; 3rd most visited in Belarus; 6th most visited in Kazakhstan; 8th most visited in Kyrgyzstan and Moldova; 12th most visited in Latvia. It was the fourth most viewed site in Ukraine until, in May 2017, the Ukrainian government banned the use of VK in Ukraine. According to a study for May 2018 conducted by Factum Group Ukraine VK remained the fourth most viewed site in Ukraine, but Facebook was twice as much visited. For 2019, VK appeared as the most visited social network in Ukraine according to Alexa. According to the Internet Association of Ukraine the share of Ukrainian Internet users who visit VK daily had fallen from 54% to 10% from September 2016 to September 2019. They also claimed in November 2019 that Facebook was the most popular social network. VK was expected to gain most of the users lost by Facebook and Instagram after they were blocked in Russia in 2022, according to a Calltouch poll. == Ownership == Initially, founder and CEO Pavel Durov owned 20% of shares (although he had majority voting power through proxy votes), and a trio of Russian-Israeli investors Yitzchak Mirilashvili, his father Mikhael Mirilashvili, and Lev Leviev owned 60%, 10%, and 10% respectively. In 2007, Digital Sky Technologies, an investment company managed by Yuri Milner, acquired a total of 24.99% of the shares from shareholders, investing $16.3 million. In preparation for the IPO in September 2010, DST separated international and Russian assets: the former formed the DST Global fund, while the latter, including VKontakte and rival social network Odnoklassniki, were merged into Mail.ru Group. Mail.ru Group used part of the money to acquire 7.5% of the social network for $112.5 million at a valuation of the entire project of 1.5 billion dollars. After exercising a 7.5% option in July 2011 for $111.7 million, Mail.ru Group accumulated a 39.99% stake in VKontakte. The head of Mail.ru Group, Dmitry Grishin, voiced the company's intention to gain 100% control over VKontakte. MRG was discussing with shareholders to buy out shares from the valuation of the entire company in $2-3 billion. In the summer of 2011, Mirilashvili and Leviev were ready to accept in payment owned by Mail.ru Group shares of Facebook, Groupon, and Zynga, but the deal failed due to Durov's unwillingness to sell a stake on MRG terms. Later, the co-founders considered VKontakte's IPO as an alternative. In March 2012, Durov "accidentally" became plugged into the negotiations where Mirilashvili and Leviev discussed selling their stakes directly to Mail.ru Group's main investor, Alisher Usmanov. On the same day, Durov deleted the pages of the first co-investors, stopped contacting them, and soon announced that VKontakte would postpone its IPO indefinitely. On 29 May 2012, Mail.ru Group announced its decision to yield control of the company to Durov by offering him the voting rights on its shares. Combined with Durov's personal 12% stake, this gave him 52% of the votes. In April 2013, the Mirilashvili family sold its 40% share in VK to United Capital Partners for $1.12 billion, while Lev Leviev sold his 8% share in the same deal, giving United Capital Partners 48% ownership. In January 2014, VK's founder Pavel Durov sold his 12% stake in the company to I

  Read more →
• 

  Cover-coding

  Cover-coding is a technique for obscuring the data that is transmitted over an insecure link, to reduce the risks of snooping. An example of cover-coding would be for the sender to perform a bitwise XOR (exclusive OR) of the original data with a password or random number which is known to both sender and receiver. The resulting cover-coded data is then transmitted from sender to the receiver, who uncovers the original data by performing a further bitwise XOR (exclusive OR) operation on the received data using the same password or random number. ISO 18000-6C (EPC Class 1 Generation 2) RFID tags protect some operations with a cover code. The reader requests a random number from the tag, and the tag responds with a new random number. The reader then encrypts future communications with this number, using bitwise XOR, to the data it sends. Cover coding is secure if the tag signal can't be intercepted and the random number is not re-used. Compared to the loud transmissions from the reader, tag backscatter is much weaker and difficult -- but not impossible -- to intercept.

  Read more →
• 

  Yao's test

  In cryptography and the theory of computation, Yao's test is a test defined by Andrew Chi-Chih Yao in 1982, against pseudo-random sequences. A sequence of words passes Yao's test if an attacker with reasonable computational power cannot distinguish it from a sequence generated uniformly at random. == Formal statement == === Boolean circuits === Let P {\displaystyle P} be a polynomial, and S = { S k } k {\displaystyle S=\{S_{k}\}_{k}} be a collection of sets S k {\displaystyle S_{k}} of P ( k ) {\displaystyle P(k)} -bit long sequences, and for each k {\displaystyle k} , let μ k {\displaystyle \mu _{k}} be a probability distribution on S k {\displaystyle S_{k}} , and P C {\displaystyle P_{C}} be a polynomial. A predicting collection C = { C k } {\displaystyle C=\{C_{k}\}} is a collection of boolean circuits of size less than P C ( k ) {\displaystyle P_{C}(k)} . Let p k , S C {\displaystyle p_{k,S}^{C}} be the probability that on input s {\displaystyle s} , a string randomly selected in S k {\displaystyle S_{k}} with probability μ ( s ) {\displaystyle \mu (s)} , C k ( s ) = 1 {\displaystyle C_{k}(s)=1} , i.e. Moreover, let p k , U C {\displaystyle p_{k,U}^{C}} be the probability that C k ( s ) = 1 {\displaystyle C_{k}(s)=1} on input s {\displaystyle s} a P ( k ) {\displaystyle P(k)} -bit long sequence selected uniformly at random in { 0 , 1 } P ( k ) {\displaystyle \{0,1\}^{P(k)}} . We say that S {\displaystyle S} passes Yao's test if for all predicting collection C {\displaystyle C} , for all but finitely many k {\displaystyle k} , for all polynomial Q {\displaystyle Q} : === Probabilistic formulation === As in the case of the next-bit test, the predicting collection used in the above definition can be replaced by a probabilistic Turing machine, working in polynomial time. This also yields a strictly stronger definition of Yao's test (see Adleman's theorem). Indeed, one could decide undecidable properties of the pseudo-random sequence with the non-uniform circuits described above, whereas BPP machines can always be simulated by exponential-time deterministic Turing machines.

  Read more →
• 

  Learning rate

  In machine learning and statistics, the learning rate is a tuning parameter in an optimization algorithm that determines the step size at each iteration while moving toward a minimum of a loss function. Since it influences to what extent newly acquired information overrides old information, it metaphorically represents the speed at which a machine learning model "learns". In the adaptive control literature, the learning rate is commonly referred to as gain. In setting a learning rate, there is a trade-off between the rate of convergence and overshooting. While the descent direction is usually determined from the gradient of the loss function, the learning rate determines how big a step is taken in that direction. Too high a learning rate will make the learning jump over minima, but too low a learning rate will either take too long to converge or get stuck in an undesirable local minimum. In order to achieve faster convergence, prevent oscillations and getting stuck in undesirable local minima the learning rate is often varied during training either in accordance to a learning rate schedule or by using an adaptive learning rate. The learning rate and its adjustments may also differ per parameter, in which case it is a diagonal matrix that can be interpreted as an approximation to the inverse of the Hessian matrix in Newton's method. The learning rate is related to the step length determined by inexact line search in quasi-Newton methods and related optimization algorithms. == Learning rate schedule == Initial rate can be left as system default or can be selected using a range of techniques. A learning rate schedule changes the learning rate during learning and is most often changed between epochs/iterations. This is mainly done with two parameters: decay and momentum. There are many different learning rate schedules but the most common are time-based, step-based and exponential. Decay serves to settle the learning in a nice place and avoid oscillations, a situation that may arise when too high a constant learning rate makes the learning jump back and forth over a minimum, and is controlled by a hyperparameter. Momentum is analogous to a ball rolling down a hill; we want the ball to settle at the lowest point of the hill (corresponding to the lowest error). Momentum both speeds up the learning (increasing the learning rate) when the error cost gradient is heading in the same direction for a long time and also avoids local minima by 'rolling over' small bumps. Momentum is controlled by a hyperparameter analogous to a ball's mass which must be chosen manually—too high and the ball will roll over minima which we wish to find, too low and it will not fulfil its purpose. The formula for factoring in the momentum is more complex than for decay but is most often built in with deep learning libraries such as Keras. Time-based learning schedules alter the learning rate depending on the learning rate of the previous time iteration. Factoring in the decay the mathematical formula for the learning rate is: η n + 1 = η 0 1 + d n {\displaystyle \eta _{n+1}={\frac {\eta _{0}}{1+dn}}} where η {\displaystyle \eta } is the learning rate, η 0 {\displaystyle \eta _{0}} is the original learning rate, d {\displaystyle d} is a decay parameter and n {\displaystyle n} is the iteration step. Step-based learning schedules changes the learning rate according to some predefined steps. The decay application formula is here defined as: η n = η 0 d ⌊ 1 + n r ⌋ {\displaystyle \eta _{n}=\eta _{0}d^{\left\lfloor {\frac {1+n}{r}}\right\rfloor }} where η n {\displaystyle \eta _{n}} is the learning rate at iteration n {\displaystyle n} , η 0 {\displaystyle \eta _{0}} is the initial learning rate, d {\displaystyle d} is how much the learning rate should change at each drop (0.5 corresponds to a halving) and r {\displaystyle r} corresponds to the drop rate, or how often the rate should be dropped (10 corresponds to a drop every 10 iterations). The floor function ( ⌊ … ⌋ {\displaystyle \lfloor \dots \rfloor } ) here drops the value of its input to 0 for all values smaller than 1. Exponential learning schedules are similar to step-based, but instead of steps, a decreasing exponential function is used. The mathematical formula for factoring in the decay is: η n = η 0 e − d n {\displaystyle \eta _{n}=\eta _{0}e^{-dn}} where d {\displaystyle d} is a decay parameter. == Adaptive learning rate == The issue with learning rate schedules is that they all depend on hyperparameters that must be manually chosen for each given learning session and may vary greatly depending on the problem at hand or the model used. To combat this, there are many different types of adaptive gradient descent algorithms such as Adagrad, Adadelta, RMSprop, and Adam which are generally built into deep learning libraries such as Keras.

  Read more →
• 

  Perfectly Imperfect (platform)

  Perfectly Imperfect is an online newsletter and social media platform. It was initially founded in 2020 as a biweekly email newsletter that focused on recommendations. In January 2024, Perfectly Imperfect launched PI.FYI, a social media platform. The platform is based around sharing recommendations. Its main feed is presented in reverse chronological order and is not algorithmically curated. == History == Perfectly Imperfect was started during the COVID-19 pandemic by Tyler Bainbridge, alongside college friends Alex Cushing and Serey Morm, whom he met at UMass Lowell; Morm later departed. Motivated by a dissatisfaction with algorithm-driven recommendation culture, they launched on Substack in September 2020. Its early newsletter format, PI, published brief recommendation lists and personal notes from contributors. Contributors have included a mix of underground artists and more established creative figures, such as Charli XCX, Chloe Cherry, Chloe Wise, and Meetka Otto. In October 2024, PI announced it was leaving Substack to launch its own site. == Overview == The current platform, PI.FYI, features both editorial content (guest columns, long-form essays, staff picks) and user-generated recommendations. The platform also supports "Ask" posts, where users can solicit recommendations from the community, and allows commenting, liking, and profile customization. In August 2025, it launched an events feature. In 2022, Perfectly Imperfect hosted their first offline event at Baby's All Right in Brooklyn, with a performance by The Dare. They have since expanded their event promotion/sponsorship to markets such as Los Angeles, San Francisco, and even Auckland.

  Read more →
• 

  Public Services Network

  The Public Services Network (PSN) is a UK government's high-performance network, which helps public sector organisations work together, reduce duplication and share resources. It unified the provision of network infrastructure across the United Kingdom public sector into an interconnected "network of networks" to increase efficiency and reduce overall public expenditure. It is now a legacy network and public sector organisations are being migrated to using services on the public internet. == Origins == The Public Services Network (PSN) was launched officially as part of the Transformational Government Strategy commencing in 2005, under the original name of the Public Sector Network. Prior to this, some parts of local government had already successfully implemented the concept. The Hampshire Public Services Network (HPSN) was the first PSN, launched in 1999, followed closely by Kent County Councils partnerships with the KPSN. The HPSN, encompassing all of the borough, district and unitary councils, with the County Council, as well as the Fire Services, the Isle of Wight Council and 540 schools. National PSN technical and architecture compliance criteria were established from 2007, by GDS working with local government leaders from Socitm (the Society of Information Technology Management) on the National CIO Council and the Local CIO Council. The PSN's aim was to bring public services organisations with a common interest onto a single, coherent and standards-based ‘network of networks’. This would create influence, economies of scale and a commonality of standards for secure and easy inter-connection between public service organisations. The original concept of a network of networks strategy was based upon the work already undertaken in local government and recognition of Communities of Interest (COI) within the Criminal Justice Sector during work by the Office for Criminal Justice Reform (OCJR) between 2005 and 2007 to enable data sharing across business units. In this context a COI was defined as groups of Government departments and external partners who in combination provided services within a specific area of operation and used the same data, with a similar risk profile, shared risk appetite and common governance framework. Historically each group member had implemented their own networks and standards of operation in isolation with little or no consideration as to how services and data may be shared and resulting in increased costs of operation. The Network of Networks strategy proposed within OCJR recommended the creation of specific networks based upon these Communities of Interest which were joined together through data interchange gateways supporting common standards. Under this approach networks would be arranged by data type and business functions such as Criminal Justice, Health and Social Care, Defence and Intelligence or Public Finance rather than solely on established departmental boundaries. Within a COI, trust relationships and data interchange are readily supported, enabling data sharing without a need to cross network boundaries and providing benefits of scale without the challenges and compromises intrinsic to homogeneous cross sector networks. Data is made available without a need to transport it between organisations and control is retained by the data originator. In early 2007 a group of UK Government department CTOs in conjunction with the Office for Government Commerce Buying Solutions (OGC BS) established the vision for a single commonly provided, procured and managed public sector voice and data network infrastructure to replace the multitude of separately procured and managed networks serving various segments of the UK public sector; Education, Health, Central Government, Local Government etc. In 2008 an Industry Working Group was established to document the objectives and requirements more clearly. Their report set out the architectural and commercial principles as well as anticipated security, service management, governance and transition arrangements. == Architecture == The PSN comprises a core network, the Government Conveyancing Network or GCN provided by GCN Service Providers or GCNSPs. The GCN interconnects multiple operator networks, termed Direct Network Service Providers or DNSPs. Subscriber organisations contract to a connection from a local participating DNSP, connect via that to GCN and hence onwards to other interconnected networks and services. The GCN network is entirely based on IPv4 and MPLS and the GCNSPs are not currently mandated to provide IPv6, though they should have a roadmap to implementing it if and when required. == Commercial framework == In 2010 Virgin Media Business, BT, Cable & Wireless and Global Crossing signed Deeds of Undertaking (DoU) and subsequently achieved accreditation for providing GCN and IP VPN services. In March 2012, BT, Cable & Wireless, Capita Business Services, Eircom, Fujitsu, Kcom, Level 3, Logicalis, MDNX, Thales, Updata and Virgin Media Business were successful bidders for the initial two-year PSN Connectivity framework. In June 2012, 29 companies were confirmed as suppliers of ICT services to the UK public sector under the Government's PSN Services framework contract. Apart from most of the previous suppliers, additional companies also included 2e2, Airwave Solutions, Azzurri Communications, Cassidian, CSC Computer Sciences, Computacenter, Daisy Communications, Easynet Global Services, EE, Freedom Communications, Icom Holdings, NextiraOne, PageOne Communications, Phoenix IT Group, Siemens Communications, Specialist Computer Centres, Telefónica, telent Technology Services, Uniworld Communications and Vodafone. == Governance == The PSN is managed within the Cabinet Office where it is part of the Government Digital Service. == Early implementations == There were already notable initiatives in progress in county council areas, demonstrating public sector network integration in both the Hampshire HPSN2 network and in Kent's community network. Project Pathway was established as a pilot linking these two county-wide networks, with Virgin Media Business and Global Crossing the subscriber and GCN network elements. Staffordshire County Council was the first council in England to establish a PSN that included the county's NHS Health partners. Other county councils have since followed the leads of these councils. == Transition == Centrally procured public sector networks are expected to migrate across to the PSN framework as they reach the end of their contract terms, either through an interim framework or directly. The Government Secure Intranet (GSi) contracts expired in September 2011, running on to 12 February 2012 and were replaced by the transitional Government Secure Intranet Convergence Framework (GCF). The Managed Telephony Service (MTS) contract expired on 31 December 2011 and was replaced by the Managed Telephony Convergence Framework (MTCF). == Future plan == In a blog post published on 20 January 2017, Government Digital Service announced that the Technology Leaders Network (TLN) had agreed that government was starting a journey away from the PSN. This was because using the Internet was considered suitable for the vast majority of the work that the public sector does. The blog post confirmed that the 'move was not going to happen immediately' and stated that 'there's quite a bit of work to do across the public sector to prepare for the changes'. It also stated that it was too early for a full timeline to be provided, although all PSN-connected organisations would be updated as the process evolved. The blog post confirmed that organisations that need to access services that are only available on the PSN would still need to connect to it for the time being and continue to meet its assurance requirements. In a blog post published on 16 March 2017, Government Digital Service (GDS) set out its plans for PSN assurance. The blog post confirmed that the PSN compliance process wasn't 'going anywhere, certainly for a while yet'. It explained that the TLN agreed that – as one of the only recognised, externally accredited, cross-government common assurance standards – it 'needs to live on far beyond the end of the physical PSN network'. Government Digital Service, along with the National Cyber Security Centre (NCSC) and the Cyber and Government Security Directorate, are now looking at ways to expand and reframe PSN compliance in a new context that, while retaining the assurance principles that are the basis of the existing process, will aim to improve the process. A GDS blog post titled 'The road to closing down the PSN' published on 8 September 2020 describes how the public sector will migrate away from the PSN. The Cabinet Office has set up a programme called Future Networks for Government (FN4G) to help organisations move away from the PSN.

  Read more →