AI Headshot Apk

AI Headshot Apk — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Shaded Picture System

    Shaded Picture System

    The Shaded Picture System was a 3D raster computer display processor introduced by Evans & Sutherland in October 1973. The Shaded Picture System was the first general-purpose, commercially available raster computer graphics display processor capable of real-time, shaded 3D graphics. It could only display black and white graphics at a resolution of 256 by 256. It was extremely expensive, and very few units were ever sold. == History == The principles of shaded, hidden-line true 3D graphics were pioneered at the University of Utah in 1967. However, this algorithm was slow and would take several minutes to produce an image. In 1970, Gary Watkins developed a FORTRAN simulator of a faster algorithm that would theoretically generate shaded 3D images in real-time, "if implemented in suitable hardware". The simulator itself was still not capable of real-time shaded 3D image rendering. Evans & Sutherland developed a functional prototype of this "suitable hardware", which was later sold as the Shaded Picture System in 1973. About a year earlier in 1972, Evans & Sutherland sold the first and only CT1 to Case Western Reserve University. The CT1, or Continuous Tone 1, was a specialized image generator, not meant as a marketable or mass-produced product. At the time, the CT1, along with G.E./NASA's upgraded Electronic Scene Generator from 1971, would have been the only real-time raster graphics systems sold to customers comparable to the Shaded Picture System, although both the CT1 and Electronic Scene Generator were intentionally produced as one-off products and specialized for the needs of their customers. The Shaded Picture System, in contrast, was intentionally marketed.In early 1975, Evans & Sutherland demonstrated a random-access video frame buffer using relatively low-cost semiconductor memory, which was much more capable than the Shaded Picture System. When interfaced with a (non-shaded) E&S Picture System, the frame buffer had a resolution of 512 by 512 in grayscale and partial color capabilities. By the end of 1975, this frame buffer was commercially available.

    Read more →
  • Downloadable content

    Downloadable content

    Downloadable content (DLC) is additional content created for an already released video game, distributed through the Internet by the game's publisher. It can be added for no extra cost or as a form of video game monetization, enabling the publisher to gain additional revenue from a title after it has been purchased, often using a microtransaction system. DLC can range from cosmetic content, such as skins, to new in-game content, like characters, levels, modes, and larger expansions that may contain a mix of such content as a continuation of the base game. In some games, multiple DLCs (including future DLC not yet released) may be bundled as part of a "season pass"—typically at a discount rather than purchasing each DLC individually. While the Dreamcast was the first home console to support DLC (albeit in a limited form due to hardware and internet connection limitations), Microsoft's Xbox helped popularize the concept. Since the seventh generation of video game consoles, DLC has been a prevalent feature of major video game platforms with internet connectivity. == Etymology == Since the popularization of microtransactions in online distribution platforms such as Steam, the term DLC has become a synonymous for any form of paid content in video games, regardless of whether they constitute the download of new content. Furthermore, this led to the creation of the oxymoronic term "on-disc DLC" for content included on the game's original files but locked behind a paywall. == History == === Precursors to DLC === The earliest form of downloadable content were offerings of full games, such as on the Atari 2600's GameLine service, which allowed users to download games using a telephone line. A similar service, Sega Channel, allowed for the downloading of games to the Sega Genesis over a cable line. While the GameLine and Sega Channel services allowed for the distribution of entire titles, they did not provide downloadable content for existing titles. Expansion packs were sold at retail for some PC games, which featured content such as additional levels, characters, or maps for a base game. They often required an installation of the original game in order to function, but some games (such as Half-Life) had "standalone" expansions, which were essentially spin-off games that reused engine code and assets from the original game. === On consoles === The Dreamcast was the first console to feature online support as a standard; DLC was available, though limited in size due to the narrowband connection and the 200 block limit of the Visual Memory Unit memory card. These online features were still considered a breakthrough in video games. With the release of the Xbox, Microsoft was the second company to implement downloadable content. Many Xbox titles, including Splinter Cell, Halo 2, and Ninja Gaiden, offered varying amounts of extra content, available for download through the Xbox Live service. Most of this content was available free. With the advent of the GameCube, Nintendo was the third company to implement downloadable content. Many GameCube titles offered varying amounts of extra content from Game Boy Advance titles with the GameCube – Game Boy Advance link cable. All of this content was available free. The Xbox 360 (2005) included more robust support for digital distribution, including DLC downloads and purchases, via its Xbox Live Marketplace service. Microsoft believed that publishers would benefit by offering small pieces of content at a small cost ($1 to $5), rather than full expansion packs (~$20), as this would allow players to pick and chose what content they desired, providing revenue to the publishers. Microsoft also utilized a digital currency known as "Microsoft Points" for transactions, which could also be purchased through physical gift cards to avoid the banking fees associated with the small price points. The PlayStation 3 (2006) adopted the same approach with their downloadable hub, the PlayStation Store. Sony planned on having the bulk of its content be purchased separately via many separate online microtransactions for PlayStation Network titles, including Gran Turismo HD Concept and Gran Turismo 5 Prologue. The Wii (2006) featured a sparser amount of downloadable content on their Wii Shop Channel, the bulk of which is accounted for by digital distribution of emulated Nintendo titles from previous generations. Music video games, such as titles from the Guitar Hero and Rock Band franchises, took significant advantage of downloadable content as a means of offering new songs to be played in-game. Harmonix claimed that Guitar Hero II would feature "more online content than anyone has ever seen in a game to this date." Rock Band features the largest number of downloadable items of any console video game, with a steady number of new songs that were added weekly between 2007 and 2013. Acquiring all the downloadable content for Rock Band would, as of July 12, 2012, cost $5,880.10. === On personal computers === As the popularity and speed of internet connections rose, so did the popularity of using the internet for digital distribution of media. User-created game mods and maps were distributed exclusively online, as they were mainly created by people without the infrastructure capable of distributing the content through physical media. In 1997, Cavedog offered a new unit every month as free downloadable content for their real-time strategy computer game Total Annihilation. Later PC digital distribution platforms, such as Games for Windows Marketplace and Steam, would add support for DLC in a similar manner to consoles. === On handhelds === Nokia phones of the late 1990s and early 2000s shipped with side-scrolling shooter Space Impact, available on various models. With the introduction of WAP in 2000, additional downloadable content for the game, with extra levels, became available. The Nintendo Wi-Fi Connection service on the Nintendo DS could be used to obtain a form of DLC for certain games, such as Picross DS—where players could download puzzle "packs" of classic puzzles from previous Picross series games (such as Mario's Picross). as well as downloadable user generated content. Due to the Nintendo DS's use of cartridges and lack of dedicated storage, most "DLC" for DS games was limited in scope, or in some cases (such as Professor Layton and the Curious Village and Moero! Nekketsu Rhythm Damashii Osu! Tatakae! Ouendan 2), was already part of the game's data on the cartridge, and merely unlocked. Its successor, the Nintendo 3DS, natively supported the purchase of DLC for supported titles via Nintendo eShop. Starting with iPhone OS 3, downloadable content became available for the platform via applications bought from the App Store. While this ability was initially only available to developers for paid applications, Apple eventually allowed for developers to offer this in free applications as well in October 2009. == On-disc DLC == In some cases, a purchased DLC may not actually download new content to the device, but merely consists of data used to enable associated content that is already present within the game's data. DLC of this nature revealed via data mining is typically referred to as "on-disc DLC" or PULC (premium unlockable content). This practice has sometimes been considered controversial, with publishers being accused of using what is effectively a microtransaction to lock access to content that was already contained within the game as sold at retail. Data relating to future DLC may be included on-disc or downloaded during updates for technical reasons as well, either to ensure online multiplayer compatibility for existing content between players who have not yet purchased the new DLC, or as dormant support code for planned content that is still in development at the time of the release. == Monetization == Downloadable content is often offered for a price. Since Facebook games popularized the business model of microtransactions, some have criticized downloadable content as being overpriced and an incentive for developers to leave items out of the initial release, with The Elder Scrolls IV: Oblivion's horse armor DLC having faced a mixed reception upon its release for that reason. However, by 2009, the Horse Armor DLC was one of the top ten content packs that Bethesda had sold, which justified the DLC model for future games. Where a normal software disc may allow its license sold or traded, DLC is generally locked to a specific user's account and does not come with the ability to transfer that license to another user. In addition to individual content downloads, video game publishers sometimes offer a "season pass", which allows users to pre-order a selection of upcoming content over a specific time period, and ensuring the customer's ability to immediately obtain the content upon release. As users do not have the ability to fully preview the content before their purchase, there is a chance that the content of a season

    Read more →
  • Plug compatibility

    Plug compatibility

    Plug compatibility is a characteristic of computer hardware that performs exactly like that of another vendor. Manufacturers who made replacements for IBM peripherals were referred to as plug-compatible manufacturers (PCMs). Later plug-compatible mainframe (also PCM) referred to IBM-compatible mainframe computers. PCM can also mean plug-compatible machine or plug-compatible module. == Plug compatibility and peripherals == Before the rise of the plug-compatible peripheral industry, computing systems were either configured with peripherals designed and built by the CPU vendor or designed to use vendor-selected rebadged devices. The first examples of plug-compatible IBM subsystems were tape drives and controls offered by Telex beginning 1965. Memorex in 1968 was first to enter the IBM plug-compatible disk market, followed shortly thereafter by a number of suppliers such as CDC, Itel, and Storage Technology Corporation. This was boosted by the world's largest user of computing equipment, the US General Services Administration, buying plug-compatible equipment. Eventually there were third-party plug-compatible alternatives to most first-party peripherals and first-party system main memory. == Plug compatibility and computer systems == A plug-compatible machine is one that is backward compatible with a prior machine. In particular, a new computer system that is plug-compatible has not only the same connectors and protocol interfaces to peripherals, but also binary-code compatibility—it runs the same software as the old system. A plug compatible manufacturer, or PCM, is a company that makes such products. One recurring theme in plug-compatible systems is the ability to be bug compatible as well. That is, if the forerunner system had software or interface problems, then the successor must have (or simulate) the same problems. Otherwise, the new system may generate unpredictable results, defeating the objective of full compatibility. Thus, it is important for customers to understand the difference between a bug and a feature, where the latter is defined as an intentional modification to the previous system (e.g. higher speed, lighter weight, smaller package, better operator controls, etc.). === Plug compatibility and IBM mainframes === The original example of plug-compatible mainframes was the Amdahl 470 mainframe computer which was plug-compatible with the IBM System 360 and 370, costing millions of dollars to develop. Similar systems were available from Comparex, Fujitsu, and Hitachi. Not all were large systems. Most of these system vendors eventually left the PCM market. In late 1981, there were eight PCM companies, and collectively they had 36 IBM-compatible models. == Non-computer usage of plug compatibility == Plug compatibility may also be used to describe replacement criteria for other components available from multiple sources. For example, a plug-compatible cooling fan may need to have not only the same physical size and shape, but also similar capability, run from the same voltage, use similar power, attach with a standard electrical connector, and have similar mounting arrangements. Some non-conforming units may be re-packaged or modified to meet plug-compatible requirements, as where an adapter plate is provided for mounting, or a different tool and instructions are supplied for installation, and these modifications would be reflected in the bill of materials for such components. Similar issues arise for computer system interfaces when competitors wish to offer an easy upgrade path. In general, plug-compatible systems are designed where industry or de facto standards have rigorously defined the environment, and there is a large installed population of machines that can benefit from third-party enhancements. Plug compatible does not mean identical. However, nothing prevents a company from developing follow-on products that are backward-compatible with its own early products.

    Read more →
  • DVD

    DVD

    DVD (digital video disc or digital versatile disc) is a digital optical disc data storage format. It was invented and developed in 1995 and first released on November 1, 1996, in Japan. The medium can store any kind of digital data and has been widely used to store video programs (watched using DVD players), software and other computer files. DVDs offer significantly higher storage capacity than compact discs (CD) while having the same dimensions. A standard single-layer DVD can store up to 4.7 GB of data, a dual-layer DVD up to 8.5 GB. Dual-layer, double-sided DVDs can store up to a maximum of 17.08 GB. Prerecorded DVDs are mass-produced using molding machines that physically stamp data onto the DVD. Such discs are a form of DVD-ROM because data can only be read and not written or erased. Blank recordable DVD discs (DVD-R and DVD+R) can be recorded once using a DVD recorder and then function as a DVD-ROM. Rewritable DVDs (DVD-RW, DVD+RW, and DVD-RAM) can be recorded and erased many times. DVDs are used in DVD-Video consumer digital video format and less commonly in DVD-Audio consumer digital audio format, as well as for authoring DVD discs written in a special AVCHD format to hold high definition material (often in conjunction with AVCHD format camcorders). DVDs containing other types of information may be referred to as DVD data discs. == Etymology == The Oxford English Dictionary comments that, "In 1995, rival manufacturers of the product initially named digital video disc agreed that, in order to emphasize the flexibility of the format for multimedia applications, the preferred abbreviation DVD would be understood to denote digital versatile disc." The OED also states that in 1995, "The companies said the official name of the format will simply be DVD. Toshiba had been using the name 'digital video disc', but that was switched to 'digital versatile disc' after computer companies complained that it left out their applications." "Digital versatile disc" is the explanation provided in a DVD Forum Primer from 2000 and in the DVD Forum's mission statement, which the purpose is to promote broad acceptance of DVD products on technology, across entertainment, and other industries. Because DVDs became highly popular for the distribution of movies in the 2000s, the term DVD became popularly used in English as a noun to describe specifically a full-length movie released on the format; for example the phrase "to watch a DVD" describes watching a movie on DVD. == History == === Development and launch === Released in 1987, CD Video used analog video encoding on optical discs matching the established standard 120 mm (4.7 in) size of audio CDs. Video CD (VCD) became one of the first formats for distributing digitally encoded films in this format, in 1993. In the same year, two new optical disc storage formats were being developed. One was the Multimedia Compact Disc (MMCD), backed by Philips and Sony (developers of the CD and CD-i), and the other was the Super Density (SD) disc, supported by Toshiba, Time Warner, Matsushita Electric, Hitachi, Mitsubishi Electric, Pioneer, Thomson, and JVC. By the time of the press launches for both formats in January 1995, the MMCD nomenclature had been dropped, and Philips and Sony were referring to their format as Digital Video Disc (DVD). On May 3, 1995, an ad hoc industry technical group formed from five computer companies (IBM, Apple, Compaq, Hewlett-Packard, and Microsoft) issued a press release stating that they would only accept a single format. The group voted to boycott both formats unless the two camps agreed on a single, converged standard. They recruited Lou Gerstner, president of IBM, to pressure the executives of the warring factions. In one significant compromise, the MMCD and SD groups agreed to adopt proposal SD 9, which specified that both layers of the dual-layered disc be read from the same side—instead of proposal SD 10, which would have created a two-sided disc that users would have to turn over. Philips/Sony strongly insisted on the source code, EFMPlus, that Kees Schouhamer Immink had designed for the MMCD, because it makes it possible to apply the existing CD servo technology. Its drawback was a loss from 5 to 4.7 Gigabytes of capacity. As a result, the DVD specification provided a storage capacity of 4.7 GB (4.38 GiB) for a single-layered, single-sided disc and 8.5 GB (7.92 GiB) for a dual-layered, single-sided disc. The DVD specification ended up similar to Toshiba and Matsushita's Super Density Disc, except for the dual-layer option. MMCD was single-sided and optionally dual-layer, whereas SD was two half-thickness, single-layer discs which were pressed separately and then glued together to form a double-sided disc. Philips and Sony decided that it was in their best interests to end the format war, and on September 15, 1995 agreed to unify with companies backing the Super Density Disc to release a single format, with technologies from both. After other compromises between MMCD and SD, the group of computer companies won the day, and a single format was agreed upon. The computer companies also collaborated with the Optical Storage Technology Association (OSTA) on the use of their implementation of the ISO-13346 file system (known as Universal Disk Format) for use on the new DVDs. The format's details were finalized on December 8, 1995. In November 1995, Samsung announced it would start mass-producing DVDs by September 1996. The format launched on November 1, 1996, in Japan, mostly with music video releases. The first major releases from Warner Home Video arrived on December 20, 1996, with four titles being available. The format's release in the U.S. was delayed multiple times, from August 1996, to October 1996, November 1996, before finally settling on early 1997. Players began to be produced domestically that winter, with March 24, 1997, as the U.S. launch date of the format proper in seven test markets. Approximately 32 titles were available on launch day, mainly from the Warner Bros., MGM, and New Line libraries, with the notable inclusion of the 1996 film Twister. However, the launch was planned for the following day (March 25), leading to a distribution change with retailers and studios to prevent similar violations of breaking the street date. The nationwide rollout for the format happened on August 22, 1997. DTS announced in late 1997 that they would be coming onto the format. The sound system company revealed details in a November 1997 online interview, and clarified it would release discs in early 1998. However, this date would be pushed back several times before finally releasing their first titles at the 1999 Consumer Electronics Show. In 2001, blank DVD recordable discs cost the equivalent of $27.34 US dollars in 2022. === Adoption === Movie and home entertainment distributors adopted the DVD format to replace the ubiquitous VHS tape as the primary consumer video distribution format. Immediately following the formal adoption of a unified standard for DVD, two of the four leading video game console companies (Sega and The 3DO Company) said they already had plans to design a gaming console with DVDs as the source medium. Sony stated at the time that they had no plans to use DVD in their gaming systems, despite being one of the developers of the DVD format and eventually the first company to actually release a DVD-based console. Game consoles such as the PlayStation 2, Xbox, and Xbox 360 use DVDs as their source medium for games and other software. Contemporary games for Windows were also distributed on DVD. Early DVDs were mastered using DLT tape, but using DVD-R DL or +R DL eventually became common. TV DVD combos, combining a standard definition CRT TV or an HD flat panel TV with a DVD mechanism under the CRT or on the back of the flat panel, and VCR/DVD combos were also available for purchase. For consumers, DVD soon overtook VHS as the favored choice for home movie releases. In 2001, DVD players outsold VCRs for the first time in the United States. At that time, one in four American households owned a DVD player. By 2007, about 80% of Americans owned a DVD player, a figure that had surpassed VCRs; it was also higher than personal computers or cable television. == Specifications == The DVD specifications created and updated by the DVD Forum are published as so-called DVD Books (e.g. DVD-ROM Book, DVD-Audio Book, DVD-Video Book, DVD-R Book, DVD-RW Book, DVD-RAM Book, DVD-AR (Audio Recording) Book, DVD-VR (Video Recording) Book, etc.). DVD discs are made up of two discs; normally one is blank, and the other contains data. Each disc is 0.6 mm thick, and they are glued together to form a DVD disc. The gluing process must be done carefully to make the disc as flat as possible to avoid both birefringence and "disc tilt", which is when the disc is not perfectly flat, preventing it from being read. Some specifications for mechanical, physical and optical characteristics of DV

    Read more →
  • Dropbox Carousel

    Dropbox Carousel

    Dropbox Carousel was a photo and video management app offered by Dropbox. The third-party native app, available on Android and iOS, allowed users to store, manage, and organize photos. Photos were organized by date, time and event and backed up on Dropbox. It competed in this space against other online photo storage services such as Google's Google Photos, Apple's iCloud, and Yahoo's Flickr. Chris Lee, Dropbox's head of product development for Carousel described the app as an add-on to Dropbox, a “dedicated experience for photos and videos” and a space for “reliving personal memories”. == History == Mailbox founder, Gentry Underwood unveiled Carousel at a gathering in San Francisco on April 9, 2014. Much of the features in Carousel come from Snapjoy, a photo start-up, that Dropbox acquired on December 19, 2012. When Carousel was launched, it marked amongst many others, a series of acquisitions made by Dropbox to prep up before opening its stock for public offering. The acquisitions would help demonstrate its expansive product offerings pitching potential profitability to investors. In December 2015, Dropbox announced that Carousel would be shut down and some Carousel features would be integrated into the primary Dropbox application. On March 31, 2016, Carousel was deactivated. == Features == Carousel prompted users to free local storage once it had synced and backed-up local photos to the cloud. Flashback was a feature (enabled by default) that showed past photos or videos taken the same day, a year, or some years back. Flashback used an algorithm designed to identify human faces - resulting in greater likelihood of the user's picture or people in the user's close circle appearing. A scrollable timeline, which was earlier a scroll wheel, at the bottom let the user scroll to photo(s) at a specific date with a finger swipe.

    Read more →
  • False answer supervision

    False answer supervision

    False answer supervision (FAS) refers to VoIP fraud where the billed duration for the caller is more than the duration of the actual connection duration. The FAS is usually performed by VoIP wholesalers in their softswitches for randomly selected calls. Adding a small amount of extra billed seconds for many calls results in significant revenue for the VoIP wholesaler. == Implementation of FAS == The FAS fraud can be implemented in a softswitch in many different ways. These include: False billing of party A without calling a party B. Usually a fake ringback tone, loopback audio or voicemail message is played Start of billing before actual answer of party B Extra billing after disconnection of party B == Detection of FAS == The FAS can be detected and blocked in a softswitch. Common methods are: Manual verification of call detail records: listening to voice recordings Identification of FAS types and using algorithms to automatically detect the FAS RTP audio signal processing: detection of voice RTP audio signal processing: detection of silence RTP audio signal processing: detection of ringback tone

    Read more →
  • Coupling (electronics)

    Coupling (electronics)

    In electronics, electric power and telecommunication, coupling is the transfer of electrical energy from one circuit to another, or between parts of a circuit. Coupling can be deliberate as part of the function of the circuit, or it may be undesirable, for instance due to coupling to stray fields. For example, energy is transferred from a power source to an electrical load by means of conductive coupling, which may be either resistive or direct coupling. An AC potential may be transferred from one circuit segment to another having a DC potential by use of a capacitor. Electrical energy may be transferred from one circuit segment to another segment with different impedance by use of a transformer; this is known as impedance matching. These are examples of electrostatic and electrodynamic inductive coupling. == Types == Electrical conduction: Direct coupling, also called conductive coupling and galvanic coupling Resistive conduction Atmospheric plasma channel coupling Electromagnetic induction: Electrodynamic induction — commonly called inductive coupling, also magnetic coupling Capacitive coupling Evanescent wave coupling Electromagnetic radiation: Radio waves — Wireless telecommunications. Electromagnetic interference (EMI) — Sometimes called radio frequency interference (RFI), is unwanted coupling. Electromagnetic compatibility (EMC) requires techniques to avoid such unwanted coupling, such as electromagnetic shielding. Microwave power transmission Other kinds of energy coupling: Acoustic coupler

    Read more →
  • History of operating systems

    History of operating systems

    Computer operating systems (OSes) provide a set of functions needed and used by most application programs on a computer, and the links needed to control and synchronize computer hardware. On the first computers, with no operating system, every program needed the full hardware specification to run correctly and perform standard tasks, and its own drivers for peripheral devices like printers and punched paper card readers. The growing complexity of hardware and application programs eventually made operating systems a necessity for everyday use. == Background == Early computers lacked any form of operating system. Instead, the user (rarely also the computer operator), had sole use of the machine for a scheduled period of time. The user would deliver his program to a computer operator who would be responsible for loading the computer with the program and data needed for its 'run'. Eventually, the end of a user's program could be detected and a control program automatically loaded which would load the next user's program, relieving the operator of having to load in each user's program individually and introducing the era of 'batched' programming. That is, a number of user programs could all be loaded together in a batch. Loading of program and data was accomplished in various ways including toggle switches (only used by a user on the earliest of computers, but later used by the computer operator to control the computer, e.g., to start it up, to shut it down, to 'pause', to 'dump' its RAM contents, and/or to control its input and/or its output), punched paper cards and magnetic or paper tape. Once loaded, the machine would be set to execute each program singly until that program completed, crashed, exceeded its time limit or went into a(n infinite) loop. In those early days, there were only 'Control Program' units for providing the software necessary to control the computers and ancillary hardware, e.g., for such semi hardware functions as I/O . None of the early 'Control Programs' were sufficiently sophisticated to recognize a looping user program or initiate a recovery action. Detection and recovery from a looping program was another critical operator function and was usually detected by the sound of the looping computer, whereupon the operator would simply initiate a complete dump of the executing program (for later debugging by the programmer) and then load in (or instruct the computer to go on to) the next user's program. Programs could sometimes be debugged via a control panel using dials, toggle switches and panel lights, making it a very manual and error-prone process. But, this was quite rare, since the high cost of even the simplest of the early computers prohibited such exclusive use of a computer by an individual programmer. Almost all program debugging was done away from any computer by the original programmer perusing the program and the dump of its execution obtained, e.g., by the computer operator or automatically by some computer hardware exception detection (such as a timeout, an attempt to divide by zero, or an over or underflow). Programmers then could only very rarely have more than one computer 'run' per day! Symbolic languages, e.g., assemblers and compilers were developed for programmers to translate symbolic program code into machine code that previously would have been hand-encoded. Later machines came with libraries of support code on punched cards or magnetic tape, which would be linked to the user's program to assist in operations such as input and output. This was the genesis of the modern-day operating system; however, machines still ran a single program or job at a time. At Cambridge University in England the job queue was at one time a string from which tapes attached to corresponding job tickets were hung with stationery pegs. == Mainframes == The first operating system used for real work was GM-NAA I/O, produced in 1956 by General Motors' Research division for its IBM 704. Most other early operating systems for IBM mainframes were also produced by customers. Early operating systems were very diverse, with each vendor or customer producing one or more operating systems specific to their particular mainframe computer. Every operating system, even from the same vendor, could have radically different models of commands, operating procedures, and such facilities as debugging aids. Typically, each time the manufacturer brought out a new machine, there would be a new operating system, and most applications would have to be manually adjusted, recompiled, and retested. === Systems on IBM hardware === Building on customer experience and requirements, IBM took on a more active role in developing operating systems for the 709, 1410, 7010, 7040, 7044, 7090 and 7094. IBM also collaborated with universities. The state of affairs continued until the mid 1960s when IBM, already a leading hardware vendor, stopped work on existing systems and put all its effort into developing the System/360 series of machines, all of which used the same instruction and input/output architecture. IBM intended to develop a single operating system for the new hardware, the OS/360. The problems encountered in the development of the OS/360 are legendary, and are described by Fred Brooks in The Mythical Man-Month—a book that has become a classic of software engineering. Because of performance differences across the hardware range and delays with software development, a whole family of operating systems was introduced instead of a single OS/360. IBM wound up releasing a series of stop-gaps followed by two longer-lived operating systems: OS/360 for mid-range and large systems. This was available in three system generation options: PCP for early users and for those without the resources for multiprogramming. MFT for mid-range systems, replaced by MFT-II in OS/360 Release 15/16. This had one successor, OS/VS1, which was discontinued in the 1980s. MVT for large systems. This was similar in most ways to PCP and MFT (most programs could be ported among the three without being re-compiled), but has more sophisticated memory management and a time-sharing facility, TSO. MVT had several successors including the current z/OS. DOS/360 for small System/360 models had several successors including the current z/VSE. It was significantly different from OS/360. IBM maintained full compatibility with the past, so that programs developed in the sixties can still run under z/VSE (if developed for DOS/360) or z/OS (if developed for MFT or MVT) with no change. IBM also developed TSS/360, a time-sharing system for the System/360 Model 67. Overcompensating for their perceived importance of developing a timeshare system, they set hundreds of developers to work on the project. Early releases of TSS were slow and unreliable; by the time TSS had acceptable performance and reliability, IBM wanted its TSS users to migrate to OS/360 and OS/VS2; while IBM offered a TSS/370 PRPQ, they dropped it after 3 releases. Several operating systems for the IBM S/360 and S/370 architectures were developed by third parties, including the Michigan Terminal System (MTS) and MUSIC/SP. === Other mainframe operating systems === Control Data Corporation developed the SCOPE operating systems in the 1960s, for batch processing and later developed the MACE operating system for time sharing, which was the basis for the later Kronos. In cooperation with the University of Minnesota, the Kronos and later the NOS operating systems were developed during the 1970s, which supported simultaneous batch and time sharing use. Like many commercial time sharing systems, its interface was an extension of the DTSS time sharing system, one of the pioneering efforts in timesharing and programming languages. In the late 1970s, Control Data and the University of Illinois developed the PLATO system, which used plasma panel displays and long-distance time sharing networks. PLATO was remarkably innovative for its time; the shared memory model of PLATO's TUTOR programming language allowed applications such as real-time chat and multi-user graphical games. For the UNIVAC 1107, UNIVAC, the first commercial computer manufacturer, produced the EXEC I operating system, and Computer Sciences Corporation developed the EXEC II operating system and delivered it to UNIVAC. EXEC II was ported to the UNIVAC 1108. Later, UNIVAC developed the EXEC 8 operating system for the 1108; it was the basis for operating systems for later members of the family. Like all early mainframe systems, EXEC I and EXEC II were a batch-oriented system that managed magnetic drums, disks, card readers and line printers; EXEC 8 supported both batch processing and on-line transaction processing. In the 1970s, UNIVAC produced the Real-Time Basic (RTB) system to support large-scale time sharing, also patterned after the Dartmouth BASIC system. Burroughs Corporation introduced the B5000 in 1961 with the MCP (Master Control Program) operating system. The B5000

    Read more →
  • Singularity studies

    Singularity studies

    Singularity studies is an interdisciplinary academic field which examines the idea of technological singularity — the hypothesised point at which artificial intelligence may surpass human intelligence, might be attained by artificial intelligence (AI), robotics, and other technologies and sciences, and its social impacts. In this academic field, the study and research are conducted across a broad array of terrains such as information science, robotics, social informatics, economics, philosophy, and ethics. The primary aim of singularity studies is to gain an integrative understanding of the transformation of social systems occurring in tandem with the explosive evolution of AI and also the changes to be effected by such transformation in the view of humans, ethics, and legal systems. == History == An academic work on technological singurality has appeared in computer science, philosophy, sociology, and law since the early 1990s. Early discussions of an intelligence explosion were popularised by science-fiction writer Vernor Vinge in 1993 and later systematised by futurist Ray Kurzweil. Since the 2010s, universities such as Oxford, Stanford, and Keio have established dedicated programmes, while peer-reviewed journals have begun to publish scenario analyses and policy studies. Ongoing debates question the predictive value of singularity scenarios and warn against a deterministic view of technology. == Characteristics of research == Singularity studies extends beyond mere future predictions and offer an intellectual foundation for proactively designing and creating a desirable future. Principal research themes in this realm include: Ethics of AI; Social implications of technologies; Possibility of harmonious coexistence of humans and AI; Communication with AI; and Redesign of social systems. == Technologists and academics == Vernor Vinge: Propounded the concept of singularity in 1993, making a massive impact on the academic and science-fiction spheres. Ray Kurzweil: Predicted the advent around 2045 of the technological singularity in his 2005 book The Singularity Is Near. Nick Bostrom: Offered philosophical reflections on superintelligence and the risks posed by AI. He is the founding director of the now-dissolved Future of Humanity Institute at the University of Oxford. === Japan === Kento Sasano: A social informatician, AI educator, and inventor. He is the president of the Japan Society of Singularity Studies. == Challenges and outlook == Singularity studies is still evolving as an academic field, and quite a few challenges remain unresolved in regard to the systematization of their theories, research methods, and educational curricula. That said, in this day and age of accelerating technological and societal shifts, interdisciplinary approaches have gained in importance and are drawing much attention in the arenas of scholarly research, intercorporate collaboration, and policy planning.

    Read more →
  • Hardware security

    Hardware security

    Hardware security is a discipline originated from the cryptographic engineering and involves hardware design, access control, secure multi-party computation, secure key storage, ensuring code authenticity, measures to ensure that the supply chain that built the product is secure among other things. A hardware security module (HSM) is a physical computing device that safeguards and manages digital keys for strong authentication and provides cryptoprocessing. These modules traditionally come in the form of a plug-in card or an external device that attaches directly to a computer or network server. Some providers in this discipline consider that the key difference between hardware security and software security is that hardware security is implemented using "non-Turing-machine" logic (raw combinatorial logic or simple state machines). One approach, referred to as "hardsec", uses FPGAs to implement non-Turing-machine security controls as a way of combining the security of hardware with the flexibility of software. Hardware backdoors are backdoors in hardware. Conceptionally related, a hardware Trojan (HT) is a malicious modification of electronic system, particularly in the context of integrated circuit. A physical unclonable function (PUF) is a physical entity that is embodied in a physical structure and is easy to evaluate but hard to predict. Further, an individual PUF device must be easy to make but practically impossible to duplicate, even given the exact manufacturing process that produced it. In this respect it is the hardware analog of a one-way function. The name "physical unclonable function" might be a little misleading as some PUFs are clonable, and most PUFs are noisy and therefore do not achieve the requirements for a function. Today, PUFs are usually implemented in integrated circuits and are typically used in applications with high security requirements. Many attacks on sensitive data and resources reported by organizations occur from within the organization itself.

    Read more →
  • TheFWA

    TheFWA

    FWA (Favourite Website Awards) is an international award platform that honors and rewards web designers, developers and agencies around the world for excellence within the field of web design and development. The FWA was founded in May 2000 by Rob Ford. In November 2012, The FWA was the most visited website award program in the history of the internet, with over 170 millions site visits. == Jury == The FWA jury is composed of more than 500 web professionals (200 women + 200 men) from 35 countries. == Awards granted == FWA of the Day (FOTD) : Every day, the FWA jury selects the best project, FWA of the Month (FOTM): Every month, the FWA jury selects the best project, People's Choice Award (PCA) : Every year, a public vote selects the people's favourite project, FWA of the Year (FOTY) : Every year, the FWA jury selects the best project. == Hall Of Fame == The FWA Hall of Fame was established in May 2007 (to celebrate the seventh anniversary of the FWA), as a recognition of web's greatest individuals and companies.

    Read more →
  • Blue check

    Blue check

    A blue check is used on social media platforms, notably X (formerly known as Twitter), to indicate the authenticity of an account. Since November 2022, Twitter users whose accounts are at least 90 days old and have a verified phone number receive verification upon subscribing to X Premium or Verified Organizations; this status persists as long as the subscription remains active. When introduced in June 2009, the system provided the site's readers with a means to distinguish genuine notable account holders, such as celebrities and organizations, from impostors or parodies. Until November 2022, a blue checkmark displayed against an account name indicated that Twitter had taken steps to ensure that the account was actually owned by the person or organization whom it claimed to represent. The checkmark does not imply endorsement from Twitter, and does not mean that tweets from a verified account are necessarily accurate or truthful in any way. People with verified accounts on Twitter are often colloquially referred to as "blue checks" on social media and by reporters. In November 2022, the verification program was modified heavily by new owner Elon Musk, extending verification to any account with a verified phone number and an active subscription to an eligible X Premium (formerly Twitter Blue) plan. These changes faced criticism from users and the media, who believed that the changes would ease impersonation, and allow accounts spreading misleading information to feign credibility. In a related change, Twitter introduced additional gold and gray checkmarks, used by Verified Organizations and government-affiliated accounts, respectively. Twitter claims that the changes to verification are required to "reduce fraudulent accounts and bots". Twitter users who had been verified through the previous system were known as "legacy verified" accounts; legacy verification was deprecated in April 2023, and stripped from accounts who do not meet the new payment requirements. Musk later implied that he had been personally paying for the X Premium subscriptions of several notable celebrities. == Until November 2022 == In June 2009, after being criticized by Kanye West and sued by Tony La Russa over unauthorized accounts run by impersonators, the company launched their "Verified Accounts" program. Twitter stated that an account with a "blue tick" verification badge indicates "we've been in contact with the person or entity the account is representing and verified that it is approved". After the beta period, the company stated in their FAQ that it "proactively verifies accounts on an ongoing basis to make it easier for users to find who they're looking for" and that they "do not accept requests for verification from the general public". Originally, Twitter took on the responsibility of reaching out to celebrities and other notable people to confirm their identities in order to establish a verified account. In July 2016, Twitter announced a public application process to grant verified status to an account "if it is determined to be of public interest" and that verification "does not imply an endorsement". In 2016, the company began accepting requests for verification, but it was discontinued the same year. Twitter explained that the volume of requests for verified accounts had exceeded its ability to cope; rather, Twitter determines on its own whom to approach about verified accounts, limiting verification to accounts which are "authentic, notable, and active". In November 2020, Twitter announced a relaunch of its verification system in 2021. According to the new policy, Twitter verifies six different types of accounts; for three of them (companies, brands, and influential individuals like activists), the existence of a Wikipedia page will be one criterion for showing that the account has "Off Twitter Notability". === Controversy === On June 21, 2014, actor William Shatner raised an issue with several Engadget editorial staff and their verification status on Twitter. Besides the site's social media editor, John Colucci, Shatner also targeted several junior members of the staff for being "nobodies", unlike some of his actor colleagues who did not bear such distinction. Shatner claimed Colucci and the team were bullying him when giving a text interview to Mashable. Over a month later, Shatner continued to discuss the issue on his Tumblr page, to which Engadget replied by defending its team and discussing the controversy surrounding the social media verification. Twitter's practice and process for verifying accounts came under scrutiny again in 2017 after the company verified the account of white supremacist and far-right political activist, Jason Kessler. Many who criticized Twitter's decision to verify Kessler's account saw this as a political act on the company's behalf. In response, Twitter put its verification process on hold. The company tweeted, "Verification was meant to authenticate identity & voice but it is interpreted as an endorsement or an indicator of importance. We recognize that we have created this confusion and need to resolve it. We have paused all general verifications while we work and will report back soon." As of November 2017, Twitter continued to deny verification of Julian Assange's account following his requests. In November 2019, Dalit activists of India alleged that higher-caste people get Twitter verification easily and trended hashtags #CancelAllBlueTicksInIndia and #CasteistTwitter. Critics have said that the company's verification process is not transparent and causes digital marginalisation of already marginalised communities. Twitter India rejected the allegations, calling them "impartial" and working on a "case-by-case" policy. == Since November 2022 == On April 20, 2023, Twitter (known as X since July 2023) began removing verification status for users of public interest, causing a controversy among Twitter users. The website's system was altered, allowing any individual to receive verification for a monthly fee, an act which saw significant criticism. Following the acquisition of Twitter by Elon Musk on October 28, 2022, Musk told Twitter employees to introduce paid verification by November 7 through Twitter Blue. The Verge reported that the updated Blue subscription would cost $19.99 per month, and users would lose their verification status if they did not join within 90 days. Following backlash, Musk tweeted, in response to author Stephen King, a lowered $8 price on November 1, 2022. Twitter confirmed the new price of $7.99 per month on November 5, 2022. The new verification system began rollout on November 9, 2022, a day after the 2022 United States elections. The decision to delay its rollout was to address concerns about users potentially spreading misinformation about voting results by posing as news outlets and lawmakers. At the same time, Twitter introduced a secondary gray "Official" label on some high-profile accounts, but removed them hours after launch. Less than 48 hours later, Twitter reinstated the gray "Official" label, after multiple users were suspended for deliberately impersonating reporters and high-profile athletes like LeBron James. A viral tweet from an account purporting to be the pharmaceutical company Eli Lilly and Company caused the company's stock to fall after announcing "insulin is free now". As a result, Twitter disabled new Blue subscriptions on November 11, 2022. === Announcement === In October 2022, Casey Newton of Platformer reported that executives at Twitter began discussing the possibility of users being forced to pay for Twitter Blue in order to keep their verification status. Musk publicly announced that verification was "being revamped right now" after Newton's article; according to The Verge, Twitter planned to increase the price of Twitter Blue from US$4.99 per month to US$19.99 per month. Users would have had 90 days to subscribe or face losing their verification status, and employees were told to implement paid verification by November 9 or risk getting fired. Upon the news that Twitter Blue would cost US$19.99 per month, author Stephen King expressed displeasure towards Twitter and stated that he would leave. Musk, replying to King's tweet, proposed that the service should cost US$7.99 instead. In a separate tweet, Musk wrote that Twitter Blue subscribers would receive priority in replies, mentions, and search, fewer advertisements, and longer audio and video. Although paid verification was expected to be launched by November 7, the reintroduction of Twitter Blue was delayed until after the 2022 United States elections on November 9, according to a memo obtained by The New York Times. The announcement of paid verification resulted in several accounts facetiously impersonating Musk, such as those of comedians Kathy Griffin and Sarah Silverman, being suspended. In response, Musk announced that impersonators using Twitter Blue "will be permanently suspended". An "official

    Read more →
  • Intelligent control

    Intelligent control

    Intelligent control is a class of control techniques that use various artificial intelligence computing approaches like neural networks, Bayesian probability, fuzzy logic, machine learning, reinforcement learning, evolutionary computation and genetic algorithms. == Overview == Intelligent control can be divided into the following major sub-domains: Neural network control Machine learning control Reinforcement learning Bayesian control Fuzzy control Neuro-fuzzy control Expert Systems Genetic control New control techniques are created continuously as new models of intelligent behavior are created and computational methods developed to support them. === Neural network controller === Neural networks have been used to solve problems in almost all spheres of science and technology. Neural network control basically involves two steps: System identification Control It has been shown that a feedforward network with nonlinear, continuous and differentiable activation functions have universal approximation capability. Recurrent networks have also been used for system identification. Given, a set of input-output data pairs, system identification aims to form a mapping among these data pairs. Such a network is supposed to capture the dynamics of a system. For the control part, deep reinforcement learning has shown its ability to control complex systems. === Bayesian controllers === Bayesian probability has produced a number of algorithms that are in common use in many advanced control systems, serving as state space estimators of some variables that are used in the controller. The Kalman filter and the Particle filter are two examples of popular Bayesian control components. The Bayesian approach to controller design often requires an important effort in deriving the so-called system model and measurement model, which are the mathematical relationships linking the state variables to the sensor measurements available in the controlled system. In this respect, it is very closely linked to the system-theoretic approach to control design.

    Read more →
  • Boba liberal

    Boba liberal

    Boba liberal is a term mostly used within the Asian diaspora communities in the West, especially in the United States. It describes someone of East or Southeast Asian descent living in the West who has a shallow, surface-level liberal outlook. It is also occasionally used to describe conservatives who weaponize their East or Southeast Asian identity. The neologism emerged among the Asian American leftist community on Twitter who accused "boba liberals" of only holding their liberal beliefs to appear more white-adjacent by engaging in progressive social movements or viewpoints, while at the same time disregarding and trivializing issues concerning Asians. Mary Chao, writing for The North Jersey Record, said that "Asians call peers boba liberals when they aspire to liberal whiteness." An article in The Yale Herald described it as a term "used to describe the ethnocentric politics of Asian Americans, usually of East Asian descent, who exclusively advocate for issues that benefit themselves, without acknowledging problematic dimensions of their own history and working to support other people of color." The feminist magazine Fem said that "the faces of boba liberalism are Asian Americans that are part of the middle and upper economic class. As a result, boba liberals disregard the negative effects of capitalism because they profit from it. For instance, boba liberals tend to focus on advocating for Asian representation in white spaces, or discussing whether or not wearing chopsticks in one's hair is culture appropriation. These topics are popular within boba liberal circles, all while dialogue regarding inequality, globalization, and racial injustice are purposely neglected." UnHerd notes that conservative Asian Americans have used the term not to critique capitalism, but to "aim at a small but influential group of progressive Asian-American activists who are supposedly selling out other Asians, especially working-class Asians, in order to win brownie points from elite, generally white liberals." MRAsians have similarly used the term to attack Asian American feminists who supported the Black Lives Matter movement. The Asian identity of boba liberals has often been accused of being shallow and superficial. Boba liberals are accused of using surface-level stereotypical Asian traits such as liking boba tea to bolster their Asian credentials. Plan A Magazine, an Asian diaspora magazine, described the film Crazy Rich Asians and the sitcom Fresh Off the Boat as "boba liberal media", calling them the result of "a specific kind of atomized identity politics". Other media outlets have connected the Crazy Rich Asians film to boba liberalism. == Controversy == The term "boba liberal" was coined in 2019 by Vietnamese American Twitter user Redmond (@diaspora_is_red) to analyze a form of Asian American liberalism through a Marxist lens. Redmond has criticized the misappropriation of their neologism by stripping away the Marxist framework by failing to discuss "socialism, communism, the capitalist system, imperialism, and the diaspora bourgeoisie" and conflating "boba liberalism" with the flawed concept of "East Asian privilege". In 2024, Redmond criticized misuse of the term by conservatives and liberals, and said "The term boba liberalism can go away for all I care. It's corny and stale". === United States === One commentator described boba liberals as supporting policies that primarily benefit upper-income Asian-Americans, and not necessarily the Asian-American community as a whole. Therefore, while the word "liberal" is used in the term, it is not mutually exclusive to one specific ideology, as it may also extend to conservative-aligned Asians in some areas, as they would often take advantage of the "model minority" label by defending such measures.

    Read more →
  • Video game

    Video game

    A video game, computer game, or simply game is an electronic game that involves interaction with a user interface or input device (such as a joystick, controller, keyboard, or motion sensing device) to generate visual feedback from a display device, most commonly shown in a video format on a television set, computer monitor, flat-panel display or touchscreen on handheld devices, or a virtual reality headset. Most modern video games are audiovisual, with audio complement delivered through speakers or headphones, and sometimes also with other types of sensory feedback (e.g., haptic technology that provides tactile sensations). Some video games also allow microphone and webcam inputs for in-game chatting and livestreaming. Video games are typically categorized according to their hardware platform, which traditionally includes arcade video games, console games, and computer games (which includes LAN games, online games, and browser games). More recently, the video game industry has expanded onto mobile gaming through mobile devices (such as smartphones and tablet computers), virtual and augmented reality systems, and remote cloud gaming. Video games are also classified into a wide range of genres based on their style of gameplay and target audience. The first video game prototypes in the 1950s and 1960s were simple extensions of electronic games using video-like output from large, room-sized mainframe computers. The first consumer video game was the arcade video game Computer Space in 1971, which took inspiration from the earlier 1962 computer game Spacewar!. In 1972 came the now-iconic video game Pong and the first home console, the Magnavox Odyssey. The industry grew quickly during the "golden age" of arcade video games from the late 1970s to early 1980s but suffered from the crash of the North American video game market in 1983 due to loss of publishing control and saturation of the market. Following the crash, the industry matured, was dominated by Japanese companies such as Nintendo, Sega, and Sony, and established practices and methods around the development and distribution of video games to prevent a similar crash in the future, many of which continue to be followed. In the 2000s, the core industry centered on "AAA" games, leaving little room for riskier experimental games. Coupled with the availability of the Internet and digital distribution, this gave room for independent video game development (or "indie games") to gain prominence into the 2010s. Since then, the commercial importance of the video game industry has been increasing. The emerging Asian markets and proliferation of smartphone games in particular are altering player demographics towards casual and cozy gaming, and increasing monetization by incorporating games as a service. Today, video game development requires numerous skills, vision, teamwork, and liaisons between different parties, including developers, publishers, distributors, retailers, hardware manufacturers, and other marketers, to successfully bring a game to its consumers. As of 2020, the global video game market had estimated annual revenues of US$159 billion across hardware, software, and services, which is three times the size of the global music industry and four times that of the film industry in 2019, making it a formidable heavyweight across the modern entertainment industry. The video game market is also a major influence behind the electronics industry, where personal computer component, console, and peripheral sales, as well as consumer demands for better game performance, have been powerful driving factors for hardware design and innovation. == Origins == Early video games used interactive electronic devices with various display formats. The earliest example dates to 1947—a "cathode-ray tube amusement device" was filed for a patent on 25 January 1947, by Thomas T. Goldsmith Jr. and Estle Ray Mann, and issued on 14 December 1948, as U.S. Patent 2455992. Inspired by radar display technology, it consisted of an analog device allowing a user to control the parabolic arc of a dot on the screen to simulate a missile being fired at targets, which were paper drawings fixed to the screen. Other early examples include the Nimrod computer at the 1951 Festival of Britain; Christopher Strachey's Checkers, possibly the first game to display visuals on an electronic screen in 1952; OXO, a tic-tac-toe computer game by Alexander S. Douglas for the EDSAC in 1952; Tennis for Two, an electronic interactive game engineered by William Higinbotham in 1958; and Spacewar!, written by Massachusetts Institute of Technology students Martin Graetz, Steve Russell, and Wayne Wiitanen's on a DEC PDP-1 computer in 1962. Each game had different means of display: NIMROD had a panel of lights to play the game of Nim, OXO had a graphical display to play tic-tac-toe, Tennis for Two had an oscilloscope to display a side view of a tennis court, and Spacewar! had the DEC PDP-1's vector display to have two spaceships battle each other. These inventions laid the foundation for modern video games. In 1966, while working at Sanders Associates, Ralph H. Baer devised a system to play a basic table tennis game on a television screen. With the company's approval, Baer created the prototype known as the "Brown Box". Sanders patented Baer's innovations and licensed them to Magnavox, which commercialized the technology as the first home video game console, the Magnavox Odyssey, released in 1972. Separately, Nolan Bushnell and Ted Dabney, inspired by seeing Spacewar! running at Stanford University, devised a similar version running in a smaller coin-operated arcade cabinet using a less expensive computer. This was released as Computer Space, the first arcade video game, in 1971. Bushnell and Dabney went on to form Atari, Inc., and with Allan Alcorn, created their second arcade game in 1972, the hit ping pong-style Pong, which was directly inspired by the table tennis game on the Odyssey. Atari made a home version of Pong, which was released by Christmas 1975. The success of the Odyssey and Pong, both as an arcade game and home machine, launched the video game industry. Both Baer and Bushnell have been titled "Father of Video Games" for their contributions. == Terminology == The term "video game" was developed to describe electronic games played on a video display rather than on a teletype printer, audio speaker, or similar device. This also distinguished from handheld electronic games such as Merlin, which commonly used LED lights for indicators not in combination for imaging purposes. "Computer game" may also be used as a descriptor, as all these types of games essentially require the use of a computer processor; in some cases, it is used interchangeably with "video game". Particularly in the United Kingdom and Western Europe, this is common due to the historic relevance of domestically produced microcomputers. Other terms used include digital game, for example, by the Australian Bureau of Statistics. The term "computer game" can also refer to PC games, which are played primarily on personal computers or other flexible hardware systems, to distinguish them from console games, arcade games, or mobile games. Other terms, such as "television game", "telegame", or "TV game", had been used in the 1970s and early 1980s, particularly for home gaming consoles that rely on connection to a television set. However, these terms were also used interchangeably with "video game" in the 1970s, primarily due to "video" and "television" being synonymous. In Japan, where consoles like the Odyssey were first imported and then made within the country by the large television manufacturers such as Toshiba and Sharp Corporation, such games are known as "TV games", "TV geemu", or "terebi geemu". The term "TV game" is still commonly used into the 21st century. "Electronic game" may also be used to refer to video games, but this also incorporates devices like early handheld electronic games that lack any video output. The first appearance of the term "video game" emerged around 1973. The Oxford English Dictionary cited a 10 November 1973 BusinessWeek article as the first printed use of the term. Though Bushnell believed the term came from a vending magazine review of Computer Space in 1971, a review of the major vending magazines Vending Times and Cashbox showed that the term may have come even earlier, appearing first in a letter dated July 10, 1972. In the letter, Bushnell uses the term "video game" twice. Per video game historian Keith Smith, the sudden appearance suggested that the term had been proposed and readily adopted by those in the field. Around March 1973, Ed Adlum, who ran Cashbox's coin-operated section until 1972 and then later founded RePlay Magazine, covering the coin-op amusement field, in 1975, used the term in an article in March 1973. In a September 1982 issue of RePlay, Adlum is credited with first naming these games as "video games": "RePlay

    Read more →