AI Grammar Summarizer

AI Grammar Summarizer — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Advanced automation functions

  In automation production technology the actions performed by an automated process are executed by a program of instructions which is run during a work cycle. To execute work cycle programs, an automated system should be available to execute these advanced functions. == Safety monitoring == If there is a need for workers in an automated system, a safety monitoring is required for the occupational safety and health of the workers. In a safety monitoring various steps can take place including a complete stop of the system, sounding an alarm or reducing the operating speed. Usually, limiting switches are sensors like temperature probes, heat and smoke detectors or pressure sensitive floor pads. == Maintenance and repair diagnostics == There are three modes of operations which are used in a cycle of maintenance and repair diagnostics: status monitoring, failure diagnostics and recommendation of the repair procedure. In the status monitoring mode, the current system status is displayed. The failure diagnostics mode takes place when a failure occurs. The system will then suggest an adequate repair procedure to a team of experts. == Error detection and recovery == The error detection mode is a step to determine if and when a failure occurs in automated system. The possible errors can be divided into three categories. random errors, systematic errors and aberrations. While in the error recovery mode, remedy actions take place for all detected errors.

  Read more →
• 

  FreePBX Distro

  The FreePBX Distro was a freeware unified communications software system that consisted of FreePBX, a graphical user interface (GUI) for configuring, controlling and managing Asterisk PBX software. The FreePBX Distro included packages that offer VoIP, PBX, Fax, IVR, voice-mail and email functions. The FreePBX Distro Linux distribution was based on CentOS, which maintains binary compatibility with Red Hat Enterprise Linux. FreePBX has contributed to the popularity of Asterisk. As a result of CentOS Linux being discontinued and the last version of CentOS 7 going out of support on June 30, 2024, FreePBX 17 has moved over to and is supported on Debian Linux. FreePBX will no longer be providing a pre-configured FreePBX Distro, but will provide a script to install FreePBX on a fresh install of Debian Linux. In-place migration will not be possible, but will be possible by restoring a backup on the new version from the previous version. As FreePBX 16 will be supported until the release of FreePBX 18, FreePBX on this distribution will still work and be supported, however, there will be no further support for the underlying operating system. == Installation == The Official FreePBX Distro is installed from a ISO image available by web download, that includes the system CentOS, Asterisk, FreePBX GUI and assorted dependencies. This can then either be burned to DVD or written to a USB stick for installation == Support for telephony hardware == The FreePBX Distro has built-in support for cards from multiple vendors, including Digium, OpenVox, Alto, Rhino Equipment, Xorcom and Sangoma. The FreePBX Distro supports a large number of phone models via open-source modules. Supported VoIP phone manufacturers include Algo, AND, AudioCodes, Cisco, Cyberdata, Digium, Grandstream, Mitel/Aastra, Nortel/Avaya, Panasonic, Polycom, Sangoma, Snom, Xorcom and Yealink. == Development == FreePBX made its debut in 2004 as the AMP project (Asterisk Management Portal). The FreePBX Distro was released in 2011 as an turnkey solution for building a PBX using Asterisk, CentOS and FreePBX. FreePBX has over 1 million active production PBXs and over 20,000 new systems added each month. The core telephony engine is Asterisk, as configured by the Open Source FreePBX GUI. The last stable release is FreePBX Distro Stable SNG7-PBX16-64bit-2302-1 based on these main components: FreePBX 16 CentOS 7.8 Asterisk 16, 18, 19 (20 supported by upgrade once installed)

  Read more →
• 

  Browser sniffing

  Browser sniffing (also known as User agent sniffing and browser detection) is a set of techniques used in websites and web applications in order to determine the web browser a visitor is using, and to serve browser-appropriate content to the visitor. It is also used to detect mobile browsers and send them mobile-optimized websites. This practice is sometimes used to circumvent incompatibilities between browsers due to misinterpretation of HTML, Cascading Style Sheets (CSS), or the Document Object Model (DOM). While the World Wide Web Consortium maintains up-to-date central versions of some of the most important Web standards in the form of recommendations, in practice no software developer has designed a browser which adheres exactly to these standards; implementation of other standards and protocols, such as SVG and XMLHttpRequest, varies as well. As a result, different browsers display the same page differently, and so browser sniffing was developed to detect the web browser in order to help ensure consistent display of content. == Sniffer methods == === Client-side sniffing === Web pages can use programming languages such as JavaScript which are interpreted by the user agent, with results sent to the web server. For example: This code is run by the client computer, and the results are used by other code to make necessary adjustments on client-side. In this example, the client computer is asked to determine whether the browser can use a feature called ActiveX. Since this feature was proprietary to Microsoft, a positive result will indicate that the client may be running Microsoft's Internet Explorer. This is no longer a reliable indicator since Microsoft's open-source release of the ActiveX code, however, meaning that it can be used by any browser. === Standard Browser detection method === The web server communicates with the client using a communication protocol known as HTTP, or Hypertext Transfer Protocol, which specifies that the client send the server information about the browser being used to view the website in a User-Agent header. === Server-side sniffing === Extensive browser techniques enable persistent user tracking even if users try to stay anonymous. See device fingerprint for more details on browser fingerprinting. == Issues and standards == Many websites use browser sniffing to determine whether a visitor's browser is unable to use certain features (such as JavaScript, DHTML, ActiveX, or cascading style sheets), and display an error page if a certain browser is not used. However, it is virtually impossible to account for the tremendous variety of browsers available to users. Generally, a web designer using browser sniffing to determine what kind of page to present will test for the three or four most popular browsers, and provide content tailored to each of these. If a user is employing a user agent not tested for, there is no guarantee that a usable page will be served; thus, the user may be forced either to change browsers or to avoid the page. The World Wide Web Consortium, which sets standards for the construction of web pages, recommends that web sites be designed in accordance with its standards, and be arranged to "fail gracefully" when presented to a browser which cannot deal with a particular standard. Browser sniffing increases maintenance needed. Websites treating some browsers differently should provide an alternative version for other browsers. Use of user agent strings are error-prone because the developer must check for the appropriate part, such as "Gecko" instead of "Firefox". They must also ensure that future versions are supported. Furthermore, some browsers allow changing the user agent string, making the technique useless.

  Read more →
• 

  Telecommunications

  Telecommunication, often used in its plural form or abbreviated as telecom, is the transmission of information over a distance using electrical or electronic means, typically through cables, radio waves, or other communication technologies. These means of transmission may be divided into communication channels for multiplexing, allowing for a single medium to transmit several concurrent communication sessions. Long-distance technologies invented during the 19th, 20th and 21st centuries generally use electric power, and include the electrical telegraph, telephone, television, and radio. Early telecommunication networks used metal wires as the medium for transmitting signals. These networks were used for telegraphy and telephony for many decades. In the first decade of the 20th century, a revolution in wireless communication began with breakthroughs including those made in radio communications by Guglielmo Marconi, who won the 1909 Nobel Prize in Physics. Other early pioneers in electrical and electronic telecommunications include co-inventors of the telegraph Charles Wheatstone and Samuel Morse, numerous inventors and developers of the telephone including Antonio Meucci, Philipp Reis, Elisha Gray and Alexander Graham Bell, inventors of radio Edwin Armstrong and Lee de Forest, as well as inventors of television like Vladimir K. Zworykin, John Logie Baird and Philo Farnsworth. Since the 1960s, the proliferation of digital technologies has meant that voice communications have gradually been supplemented by data. The physical limitations of metallic media prompted the development of optical fibre. The Internet, a technology independent of any given medium, has provided global access to services for individual users and further reduced location and time limitations on communications. == Definition == At the 1932 Plenipotentiary Telegraph Conference and the International Radiotelegraph Conference in Madrid, the two organizations merged to form the International Telecommunication Union (ITU). They defined telecommunication as "any telegraphic or telephonic communication of signs, signals, writing, facsimiles and sounds of any kind, by wire, wireless or other systems or processes of electric signaling or visual signaling (semaphores)." The definition was later reconfirmed, according to Article 1.3 of the ITU Radio Regulations, which defined it as "Any transmission, emission or reception of signs, signals, writings, images and sounds or intelligence of any nature by wire, radio, optical, or other electromagnetic systems". As such, slow communications technologies like postal mail and pneumatic tubes are excluded from the telecommunication's definition. The term telecommunication was coined in 1904 by the French engineer and novelist Édouard Estaunié, who defined it as "remote transmission of thought through electricity". Telecommunication is a compound noun formed from the Greek prefix tele- (τῆλε), meaning distant, far off, or afar, and the Latin verb communicare, meaning to share. Communication was first used as an English word in the late 14th century. It comes from Old French comunicacion (14c., Modern French communication), from Latin communicationem (nominative communication), noun of action from past participle stem of communicare, "to share, divide out; communicate, impart, inform; join, unite, participate in," literally, "to make common", from communis. == History == Many transmission media have been used for long-distance communication throughout history, from smoke signals, beacons, semaphore telegraphs, signal flags, and optical heliographs to wires and empty space made to carry electromagnetic signals. === Before the electrical and electronic era === Long-distance communication was used long before the discovery of electricity and electromagnetism enabled the invention of telecommunications. A few of the many ingenious methods for communicating over distances prior to that are described here. Homing pigeons have been used throughout history by different cultures. Pigeon post had Persian roots and was later used by the Romans to aid their military. Frontinus claimed Julius Caesar used pigeons as messengers in his conquest of Gaul. The Greeks also conveyed the names of the victors at the Olympic Games to various cities using homing pigeons. In the early 19th century, the Dutch government used the system in Java and Sumatra. And in 1849, Paul Julius Reuter started a pigeon service to fly stock prices between Aachen and Brussels, a service that operated for a year until the gap in the telegraph link was closed. In the Middle Ages, chains of beacons were commonly used on hilltops as a means of relaying a signal. Beacon chains suffered the drawback that they could only pass a single bit of information, so the meaning of the message, such as "the enemy has been sighted" had to be agreed upon in advance. One notable instance of their use was during the Spanish Armada, when a beacon chain relayed a signal from Plymouth to London. In 1792, Claude Chappe, a French engineer, built the first fixed visual telegraphy system (or semaphore line) between Lille and Paris. However semaphore suffered from the need for skilled operators and expensive towers at intervals of ten to thirty kilometres (six to nineteen miles). As a result of competition from the electrical telegraph, the last commercial line was abandoned in 1880. === Telegraph and telephone === On July 25, 1837, the first commercial electrical telegraph was demonstrated by English inventor Sir William Fothergill Cooke and English scientist Sir Charles Wheatstone. Both inventors viewed their device as "an improvement to the [existing] electromagnetic telegraph" and not as a new device. Samuel Morse independently developed a version of the electrical telegraph that he unsuccessfully demonstrated on September 2, 1837. His code was an important advance over Wheatstone's signaling method. The first transatlantic telegraph cable was successfully completed on July 27, 1866, allowing transatlantic telecommunication for the first time. After early attempts to develop a talking telegraph by Antonio Meucci and a telefon by Johann Philipp Reis, a patent for the conventional telephone was filed by Alexander Bell in February 1876 (just a few hours before Elisha Gray filed a patent caveat for a similar device). The first commercial telephone services were set up by the Bell Telephone Company in 1878 and 1879 on both sides of the Atlantic in the cities of New Haven and London. === Radio and television === In 1894, Italian inventor Guglielmo Marconi began developing wireless communication using the then-newly discovered phenomenon of radio waves, demonstrating, by 1901, that they could be transmitted across the Atlantic Ocean. This was the start of wireless telegraphy by radio. On 17 December 1902, a transmission from the Marconi station in Glace Bay, Nova Scotia, Canada, became the world's first radio message to cross the Atlantic from North America. In 1904, a commercial service was established to transmit nightly news summaries to subscribing ships, which incorporated them into their onboard newspapers. World War I accelerated the development of radio for military communications. After the war, commercial radio AM broadcasting began in the 1920s and became an important mass medium for entertainment and news. World War II again accelerated the development of radio for the wartime purposes of aircraft and land communication, radio navigation, and radar. Development of stereo FM broadcasting of radio began in the 1930s in the United States and the 1940s in the United Kingdom, displacing AM as the dominant commercial standard in the 1970s. On March 25, 1925, John Logie Baird demonstrated the transmission of moving pictures at the London department store Selfridges. Baird's device relied upon the Nipkow disk by Paul Nipkow and thus became known as the mechanical television. It formed the basis of experimental broadcasts done by the British Broadcasting Corporation beginning on 30 September 1929. === Vacuum tubes === Vacuum tubes use thermionic emission of electrons from a heated cathode for a number of fundamental electronic functions such as signal amplification and current rectification. The simplest vacuum tube, the diode invented in 1904 by John Ambrose Fleming, contains only a heated electron-emitting cathode and an anode. Electrons can only flow in one direction through the device—from the cathode to the anode. Adding one or more control grids within the tube enables the current between the cathode and anode to be controlled by the voltage on the grid or grids. These devices became a key component of electronic circuits for the first half of the 20th century and were crucial to the development of radio, television, radar, sound recording and reproduction, long-distance telephone networks, and analogue and early digital computers. While some applications had used earlier technologies such as the sp

  Read more →
• 

  DexNet

  Dex-net is a robotic. It uses a Grasp Quality Convolutional Neural Network to learn how to grasp unusually shaped objects. == History == Dex-net was developed by University of California, Berkeley professor Ken Goldberg and graduate student Jeff Mahler. == Design == Dex-net includes a high-resolution 3-D sensor and two arms, each controlled by a different neural network. One arm is equipped with a conventional robot gripper and another with a suction system. The robot’s software scans an object and then asks both neural networks to decide, on the fly, whether to grab or suck a particular object. It runs on an off-the-shelf industrial machine made by Swiss robotics company ABB. The software learns by attempting to pick up objects in a virtual environment. Dex-Net can generalize from an object it has seen before to a new one. The robot can "nudge" such virtual objects to examine if it is unsure how to grasp them. The trial data set was 6.7 million point clouds, grasps and analytic grasp metrics generated from thousands of 3D models. Grasps are defined as a gripper's planar position, angle and depth relative to an RGB-D sensor. == Mean picks per hour == A metric called mean picks per hour (MPPH) is calculated by multiplying the average time per pick and the average probability of success for a specific set of objects. The new metric allows labs working on picking robots to compare their results. Humans are capable of between 400 and 600 MPPH. In a contest organized by Amazon recently, the best robots were capable of between 70 and 95. Dex-net has achieved 200 to 300.

  Read more →
• 

  Microelectronics

  Microelectronics is a subfield of electronics. As the name suggests, microelectronics relates to the study and manufacture (or microfabrication) of very small electronic designs and components. Usually, but not always, this means micrometre-scale or smaller. These devices are typically made from semiconductor materials. Many components of a normal electronic design are available in a microelectronic equivalent. These include transistors, capacitors, inductors, resistors, diodes and (naturally) insulators and conductors can all be found in microelectronic devices. Unique wiring techniques such as wire bonding are also often used in microelectronics because of the unusually small size of the components, leads and pads. This technique requires specialized equipment and is expensive. Digital integrated circuits (ICs) consist of billions of transistors, resistors, diodes, and capacitors. Analog circuits commonly contain resistors and capacitors as well. Inductors are used in some high frequency analog circuits, but tend to occupy larger chip area due to their lower reactance at low frequencies. Gyrators can replace them in many applications. As techniques have improved, the scale of microelectronic components has continued to decrease. At smaller scales, the relative impact of intrinsic circuit properties, such as unintended interactions between components or their parts, may become more significant. These are called parasitic effects, and the goal of the microelectronics design engineer is to find ways to compensate for or to minimize these effects, while delivering smaller, faster, and cheaper devices. Today, microelectronics design is largely aided by electronic design automation (EDA) software.

  Read more →
• 

  Vue.js

  Vue.js (commonly referred to as Vue; pronounced "view") is an open-source model–view–viewmodel front end JavaScript framework for building user interfaces and single-page applications. It was created by Evan You and is maintained by him and the rest of the active core team members. == Overview == Vue.js features an incrementally adaptable architecture that focuses on declarative rendering and component composition. The core library is focused on the view layer only. Advanced features required for complex applications such as routing, state management and build tooling are offered via officially maintained supporting libraries and packages. Vue.js allows for extending HTML with HTML attributes called directives. The directives offer functionality to HTML applications, and come as either built-in or user defined directives. == History == Vue was created by Evan You after working for Google using AngularJS in several projects. He later summed up his thought process: "I figured, what if I could just extract the part that I really liked about Angular and build something really lightweight." The first source code commit to the project was dated July 2013, at which time it was originally named "Seed". Vue was first publicly announced the following February, in 2014. Version names are often derived from manga and anime series, with the first letters arranged in alphabetical order. === Versions === When a new major is released i.e. v3.y.z, the last minor i.e. 2.x.y will become a LTS release for 18 months (bug fixes and security patches) and for the following 18 months will be in maintenance mode (security patches only). Vue 3 was officially released in September 2020. According to the State of Vue.js Report 2025, 96% of surveyed developers reported having used Vue 3.x. However, 35% also indicated that they used Vue 2.7.x in the past year, reflecting continued reliance on Vue 2 despite its end of support. The report also noted that more than a quarter of respondents encountered challenges when migrating from Vue 2 to Vue 3. === State management evolution === 2015 - Vuex introduced as official state management solution 2021 - Pinia development begins as Vuex 5 experiment 2022 - Pinia becomes officially recommended for new projects 2023 - Vue team announces Vuex maintenance mode transition According to the State of Vue.js Report 2025, the Vue's core team recommendation is reflected in developer adoption–over 80% of surveyed developers reported using Pinia while Vuex still had 38.4% usage, indicating ongoing reliance on the older library. == Features == === Components === Vue components extend basic HTML elements to encapsulate reusable code. At a high level, components are custom elements to which the Vue's compiler attaches behavior. In Vue, a component is essentially a Vue instance with pre-defined options. The code snippet below contains an example of a Vue component. The component presents a button and prints the number of times the button is clicked: === Templates === Vue uses an HTML-based template syntax that allows binding the rendered DOM to the underlying Vue instance's data. All Vue templates are valid HTML that can be parsed by specification-compliant browsers and HTML parsers. Vue compiles the templates into virtual DOM render functions. A virtual Document Object Model (or "DOM") allows Vue to render components in its memory before updating the browser. Combined with the reactivity system, Vue can calculate the minimal number of components to re-render and apply the minimal amount of DOM manipulations when the app state changes. Vue users can use template syntax or choose to directly write render functions using hyperscript either through function calls or JSX. Render functions allow applications to be built from software components. === Reactivity === Vue features a reactivity system that uses plain JavaScript objects and optimized re-rendering. Each component keeps track of its reactive dependencies during its render, so the system knows precisely when to re-render, and which components to re-render. === Transitions === Vue provides a variety of ways to apply transition effects when items are inserted, updated, or removed from the DOM. This includes tools to: Automatically apply classes for CSS transitions and animations Integrate third-party CSS animation libraries, such as Animate.css Use JavaScript to directly manipulate the DOM during transition hooks Integrate third-party JavaScript animation libraries, such as Velocity.js When an element wrapped in a transition component is inserted or removed, this is what happens: Vue will automatically sniff whether the target element has CSS transitions or animations applied. If it does, CSS transition classes will be added/removed at appropriate timings. If the transition component provided JavaScript hooks, these hooks will be called at appropriate timings. If no CSS transitions/animations are detected and no JavaScript hooks are provided, the DOM operations for insertion and/or removal will be executed immediately on next frame. === Routing === A traditional disadvantage of single-page applications (SPAs) is the inability to share links to the exact "sub" page within a specific web page. Because SPAs serve their users only one URL-based response from the server (it typically serves index.html or index.vue), bookmarking certain screens or sharing links to specific sections is normally difficult if not impossible. To solve this problem, many client-side routers delimit their dynamic URLs with a "hashbang" (#!), e.g. page.com/#!/. However, with HTML5 most modern browsers support routing without hashbangs. Vue provides an interface to change what is displayed on the page based on the current URL path – regardless of how it was changed (whether by emailed link, refresh, or in-page links). Additionally, using a front-end router allows for the intentional transition of the browser path when certain browser events (i.e. clicks) occur on buttons or links. Vue itself doesn't come with front-end hashed routing. But the open-source "vue-router" package provides an API to update the application's URL, supports the back button (navigating history), and email password resets or email verification links with authentication URL parameters. It supports mapping nested routes to nested components and offers fine-grained transition control. With Vue, developers are already composing applications with small building blocks building larger components. With vue-router added to the mix, components must merely be mapped to the routes they belong to, and parent/root routes must indicate where children should render. The code above: Sets a front-end route at websitename.com/user/. Which will render in the User component defined in (const User...) Allows the User component to pass in the particular id of the user which was typed into the URL using the $route object's params key: $route.params.id. This template (varying by the params passed into the router) will be rendered into inside the DOM's div#app. The finally generated HTML for someone typing in: websitename.com/user/1 will be: == Ecosystem == The core library comes with tools and libraries both developed by the core team and contributors. === Official tooling === Devtools – Browser devtools extension for debugging Vue.js applications Vite – Standard Tooling for rapid Vue.js development Vue Loader – a webpack loader that allows the writing of Vue components in a format called Single-File Components (SFCs) Vue.js Plugins Collection - Collection of almost 100 plugins and ecosystem libraries across various categories. === Official libraries === Vue Router – The official router, suitable for building SPAs Pinia – The official state management solution === Video courses === Vue School – Expert-led courses on Vue.js and its ecosystem. === State management libraries === Pinia – Official state management solution with modular architecture Vuex – Legacy state management library, now in maintenance mode VueUse – Collection of 200+ composition utilities including state management helpers === Community & Core Teams Resources === The State of Vue.js Report - A comprehensive publication about Vue.js created since 2017 by Monterail, Vue & Nuxt Official Partner. Each edition includes unique data from developer survey, key ecosystem trends and case studies. The latest 5th edition released in March 2025 was co-created with Evan You and Vue&Nuxt Core Teams. Although the Vue.js Ecosystem is generally very well-developed, developers point to some ecosystem gaps as one of the most important thing missing (as of March 2025 Developer Survey in the State of Vue.js Report 2025). 22% of respondents mentioned the lack of robust, official component libraries like MUI or Radix, and the need for better testing utilities. There was also demand for more modular, enterprise-ready solutions for dashboards, e-commerce, and animation libraries similar to Fr

  Read more →
• 

  Verge3D

  Verge3D is a real-time renderer and a toolkit used for creating interactive 3D experiences running on websites. == Overview == Verge3D enables users to convert content from 3D modelling tools (Blender, 3ds Max, and Maya are currently supported) to view in a web browser. Verge3D was created by the same core group of software engineers that previously created the Blend4Web framework. == Features == Verge3D uses WebGL for rendering. It incorporates components of the Three.js library and exposes its API to application developers. Puzzles Application functionality can be added via JavaScript, either by writing code directly or by using Puzzles, Verge3D’s visual programming environment based on Google Blockly. Puzzles is aimed primarily at non-programmers allowing quick creation of interactive scenarios in a drag-and-drop fashion. App Manager and web publishing App Manager is a lightweight web-based tool for creating, managing and publishing Verge3D projects, running on top of the local development server. Verge3D Network service integrated in the App Manager allows for publishing Verge3D applications via Amazon S3 and EC2 cloud services. PBR For purposes of authoring materials, a glTF 2.0-compliant physically based rendering pipeline is offered alongside the standard shader-based approach. PBR textures can be authored using external texturing software such as Substance Painter for which Verge3D offers the corresponding export preset. Besides the glTF 2.0 model, Verge3D supports physical materials of 3ds Max and Maya (with Autodesk Arnold as reference), and Blender's real-time Eevee materials. glTF and DCC software integration Verge3D integrates directly with Blender, 3ds Max, and Maya, enabling users to create 3D geometry, materials, and animations inside the software, then export them in the JSON-based glTF format. The Sneak Peek feature allows for exporting and viewing scenes from the DCC tool environment. Facebook 3D posts For Facebook publishing, Verge3D offers a specific GLB export option. The exported GLB files are displayed and can be opened in the App Manager. Asset compression Exported files can optionally use LZMA compression, resulting in a reduction in file size of up to 6x. UI and website layouts Interface layouts, created using external WYSIWYG editors, can be linked with Puzzles to trigger changes to a 3D scene being rendered in the browser and vice versa. Animation Verge3D supports skeletal animation, including animation of bipeds and character rigs, and allows for animation of material parameters. Model parts can also be set up to be dragged by the user. Physics The physics module can be linked separately to enable collision detection, dynamically moving objects, support for characters and vehicles, springs, ropes and cloth simulation. As of version 2.11, simple physics simulations can be created and controlled without coding via Puzzles, the visual programming system used by Verge3D. AR/VR The 2.10 update added support for WebXR, an in-development open technology designed to enable virtual reality and augmented reality experiences to be displayed in web browsers. It works with both headsets with controllers, like the HTC Vive and Oculus Rift, and those without, like Google Cardboard. AR/VR experiences can enabled via Puzzles or JavaScript. == Workflow == Verge3D's workflow differs substantially from other mainstream WebGL frameworks. Development of a new Verge3D application is usually started from modeling, texturing and animating 3D objects. The models are assembled in the 3D authoring tool. The scene file is then used as a basis for a Verge3D project initialized from the App Manager. An interactive scenario is optionally added using the Puzzles editor. A Verge3D application can be previewed in the web browser at any development stage using the App Manager. The finished web application can be deployed on the Verge3D Network, on Facebook or on the user's website. == Notable uses == NASA's Jet Propulsion Laboratory used Verge3D to create an interactive 3D visualization of the Mars InSight lander. The web application allows for exploring and interacting with the real-time model of the spacecraft, with the possibility to move different parts and unfurl the solar panels. NASA's older interactive web application Experience Curiosity was ported to Verge3D from Blend4Web. The application makes it possible to operate the rover, control its cameras and the robotic arm and reproduces some of the prominent events of the Mars Science Laboratory mission. Route 66 Digital's Escape Room used Verge3D and Blender. This interactive short explores how users can navigate 3D spaces and interact with objects without the need for instruction.

  Read more →
• 

  Eugene Goostman

  Eugene Goostman is a chatbot that some regard as having passed the Turing test, a test of a computer's ability to communicate indistinguishably from a human. Developed in Saint Petersburg in 2001 by a group of three programmers, the Russian-born Vladimir Veselov, Ukrainian-born Eugene Demchenko, and Russian-born Sergey Ulasen, Goostman is portrayed as a 13-year-old Ukrainian boy—characteristics that are intended to induce forgiveness in those with whom it interacts for its grammatical errors and lack of general knowledge. The Goostman bot has competed in a number of Turing test contests since its creation, and finished second in the 2005 and 2008 Loebner Prize contest. In June 2012, at an event marking what would have been the 100th birthday of the test's author, Alan Turing, Goostman won a competition promoted as the largest-ever Turing test contest, in which it successfully convinced 29% of its judges that it was human. On 7 June 2014, at a contest marking the 60th anniversary of Turing's death, 33% of the event's judges thought that Goostman was human; the event's organiser Kevin Warwick considered it to have passed Turing's test as a result, per Turing's prediction in his 1950 paper "Computing Machinery and Intelligence", that by the year 2000, machines would be capable of fooling 30% of human judges after five minutes of questioning. The validity and relevance of the announcement of Goostman's pass was questioned by critics, who noted the exaggeration of the achievement by Warwick, the bot's use of personality quirks and humour in an attempt to misdirect users from its non-human tendencies and lack of real intelligence, along with "passes" achieved by other chatbots at similar events. == Personality == Eugene Goostman is portrayed as being a 13-year-old boy from Odesa, Ukraine, who has a pet guinea pig and a father who is a gynaecologist. Veselov stated that Goostman was designed to be a "character with a believable personality". The choice of age was intentional, as, in Veselov's opinion, a thirteen-year-old is "not too old to know everything and not too young to know nothing". Goostman's young age also induces people who "converse" with him to forgive minor grammatical errors in his responses. In 2014, work was made on improving the bot's "dialog controller", allowing Goostman to output more human-like dialogue. A conversation between Scott Aaronson and Eugene Goostman ran as follows: == Competitions == Eugene Goostman has competed in a number of Turing test competitions, including the Loebner Prize contest; it finished joint second in the Loebner test in 2001, and came second to Jabberwacky in 2005 and to Elbot in 2008. On 23 June 2012, Goostman won a Turing test competition at Bletchley Park in Milton Keynes, held to mark the centenary of its namesake, Alan Turing. The competition, which featured five bots, twenty-five hidden humans, and thirty judges, was considered to be the largest-ever Turing test contest by its organizers. After a series of five-minute-long text conversations, 29% of the judges were convinced that the bot was an actual human. === 2014 "pass" === On 7 June 2014, in a Turing test competition at the Royal Society, organised by Kevin Warwick of the University of Reading to mark the 60th anniversary of Turing's death, Goostman won after 33% of the judges were convinced that the bot was human. 30 judges took part in the event, which included Lord Sharkey, a sponsor of Turing's posthumous pardon, artificial intelligence Professor Aaron Sloman, Fellow of the Royal Society Mark Pagel and Red Dwarf actor Robert Llewellyn. Each judge partook in a textual conversation with each of the five bots; at the same time, they also conversed with a human. In all, a total of 300 conversations were conducted. In Warwick's view, this made Goostman the first machine to pass a Turing test. In a press release, he added that: Some will claim that the Test has already been passed. The words Turing Test have been applied to similar competitions around the world. However this event involved more simultaneous comparison tests than ever before, was independently verified and, crucially, the conversations were unrestricted. A true Turing Test does not set the questions or topics prior to the conversations. In his 1950 paper "Computing Machinery and Intelligence", Turing predicted that by the year 2000, computer programs would be sufficiently advanced that the average interrogator would, after five minutes of questioning, "not have more than 70 per cent chance" of correctly guessing whether they were speaking to a human or a machine. Although Turing phrased this as a prediction rather than a "threshold for intelligence", commentators believe that Warwick had chosen to interpret it as meaning that if 30% of interrogators were fooled, the software had "passed the Turing test". ==== Reactions ==== Warwick's claim that Eugene Goostman was the first ever chatbot to pass a Turing test was met with scepticism; critics acknowledged similar "passes" made in the past by other chatbots under the 30% criteria, including PC Therapist in 1991 (which tricked 5 of 10 judges, 50%), and at the Techniche festival in 2011, where a modified version of Cleverbot tricked 59.3% of 1334 votes (which included the 30 judges, along with an audience). Cleverbot's developer, Rollo Carpenter, argued that Turing tests can only prove that a machine can "imitate" intelligence rather than show actual intelligence. Gary Marcus was critical of Warwick's claims, arguing that Goostman's "success" was only the result of a "cleverly-coded piece of software", going on to say that "it's easy to see how an untrained judge might mistake wit for reality, but once you have an understanding of how this sort of system works, the constant misdirection and deflection becomes obvious, even irritating. The illusion, in other words, is fleeting." While acknowledging IBM's Deep Blue and Watson projects—single-purpose computer systems meant for playing chess and the quiz show Jeopardy! respectively—as examples of computer systems that show a degree of intelligence in their specialised field, he further argued that they were not an equivalent to a computer system that shows "broad" intelligence, and could—for example, watch a television programme and answer questions on its content. Marcus stated that "no existing combination of hardware and software can learn completely new things at will the way a clever child can." However, he still believed that there were potential uses for technology such as that of Goostman, specifically suggesting the creation of "believable", interactive video game characters. Imperial College London professor Murray Shanahan questioned the validity and scientific basis of the test, stating that it was "completely misplaced, and it devalues real AI research. It makes it seem like science fiction AI is nearly here, when in fact it's not and it's incredibly difficult." Mike Masnick, editor of the blog Techdirt, was also skeptical, questioning publicity blunders such as the five chatbots being referred to in press releases as "supercomputers", and saying that "creating a chatbot that can fool humans is not really the same thing as creating artificial intelligence."

  Read more →
• 

  Digital image correlation for electronics

  Digital image correlation analyses have applications in material property characterization, displacement measurement, and strain mapping. As such, DIC is becoming an increasingly popular tool when evaluating the thermo-mechanical behavior of electronic components and systems. == CTE measurements and glass transition temperature identification == The most common application of DIC in the electronics industry is the measurement of coefficient of thermal expansion (CTE). Because it is a non-contact, full-field surface technique, DIC is ideal for measuring the effective CTE of printed circuit boards (PCB) and individual surfaces of electronic components. It is especially useful for characterizing the properties of complex integrated circuits, as the combined thermal expansion effects of the substrate, molding compound, and die make effective CTE difficult to estimate at the substrate surface with other experimental methods. DIC techniques can be used to calculate average in-plane strain as a function of temperature over an area of interest during a thermal profile. Linear curve-fitting and slope calculation can then be used to estimate an effective CTE for the observed area. Because the driving factor in solder fatigue is most often the CTE mismatch between a component and the PCB it is soldered to, accurate CTE measurements are vital for calculating printed circuit board assembly (PCBA) reliability metrics. DIC is also useful for characterizing the thermal properties of polymers. Polymers are often used in electronic assemblies as potting compounds, conformal coatings, adhesives, molding compounds, dielectrics, and underfills. Because the stiffness of such materials can vary widely, accurately determining their thermal characteristics with contact techniques that transfer load to the specimen, such as dynamic mechanical analysis (DMA) and thermomechanical analysis (TMA), is difficult to do with consistency. Accurate CTE measurements are important for these materials because, depending on the specific use case, expansion and contraction of these materials can drastically affect solder joint reliability. For example, if a stiff conformal coating or other polymeric encapsulation is allowed to flow under a QFN, its expansion and contraction during thermal cycling can add tensile stress to the solder joints and expedite fatigue failure. DIC techniques will also allow the detection of glass transition temperature (Tg). At a glass transition temperature, the strain vs. temperature plot will exhibit a change in slope. Determining the Tg is very important for polymeric materials that could have glass transition temperatures within the operating temperature range of the electronics assemblies and components on which they are used. For example, some potting materials can see the Elastic Modulus of the material change by a factor of 100 or more over the glass transition region. Such changes can have drastic effects on an electronic assembly's reliability if they are not planned for in the design process. == Out-of-plane component warpage == When 3D DIC techniques are employed, out-of-plane motion can be tracked in addition to in-plane motion. Out-of-plane warpage is especially of interest at the component level of electronics packaging for solder joint reliability quantification. Excessive warpage during reflow can contribute to defective solder joints by lifting the edges of the component away from the board and creating head-in-pillow defects in ball grid arrays (BGA). Warpage can also shorten the fatigue life of adequate joints by adding tensile stresses to edge joints during thermal cycling. == Thermo-mechanical strain mapping == When a PCBA is over-constrained, thermo-mechanical stress brought about during thermal expansion can cause board strains that could negatively affect individual component and overall assembly reliability. The full-field monitoring capabilities of an image correlation technique allow for the measurement of strain magnitude and location on the surface of a specimen during a displacement-causing event, such as PCBA during a thermal profile. These "strain maps" allow for the comparison of strain levels over full areas of interest. Many traditional discrete methods, like extensometers and strain gauges, only allow for localized measurements of strain, inhibiting their ability to efficiently measure strain across larger areas of interest. DIC techniques have also been used to generate strain maps from purely mechanical events, such as drop impact tests, on electronic assemblies.

  Read more →
• 

  Errored second

  In telecommunications and data communication systems, an errored second is an interval of a second during which any error whatsoever has occurred, regardless of whether that error was a single bit error or a complete loss of communication for that entire second. The type of error is not important for the purpose of counting errored seconds. In communication systems with very low uncorrected bit error rates, such as modern fiber-optic transmission systems, or systems with higher low-level error rates that are corrected using large amounts of forward error correction, errored seconds are often a better measure of the effective user-visible error rate than the raw bit error rate. For many modern packet-switched communication systems, even a single uncorrected bit error is enough to cause the loss of a data packet by causing its CRC check to fail; whether that packet loss was caused by a single bit error or a hundred-bit-long error burst is irrelevant. For systems using large amounts of forward error correction, the reverse applies; a single low-level bit error will almost never occur, since any small errors will almost always be corrected, but any error sufficiently large to cause the forward error correction to fail will almost always result in a large burst error. More specialist and precise definitions of errored seconds exist in standards such as the T1 and DS1 transport systems.

  Read more →
• 

  Digital heritage

  The Charter on the Preservation of Digital Heritage of UNESCO defines digital heritage as embracing "cultural, educational, scientific and administrative resources, as well as technical, legal, medical and other kinds of information created digitally, or converted into digital form from existing analogue resources". Digital heritage also includes the use of digital media in the service of understanding and preserving cultural or natural heritage. The digitization of both cultural heritage and Natural heritage serves to enable the permanent access of current and future generations to culturally important objects ranging from literature and paintings to flora, fauna, or habitats. It is also used in the preservation and access of objects with enduring or significant historical, scientific, or cultural value including buildings, archeological sites, and natural phenomena. The main idea is the transformation of a material object into a virtual copy. It should not be confused with digital humanities, which uses digitizing technology to specifically help with research. There have been several debates concerning the efficiency of the process of digitizing heritage. Some of the drawbacks refer to the deterioration and technological obsolescence due to the lack of funding for archival materials and underdeveloped policies that would regulate such a process. Another main social debate has taken place around the restricted accessibility due to the digital divide that exists around the world. Nevertheless, new technologies enable easy, instant and cross boarder access to the digitized work. Many of these technologies include spatial and surveying technology to gain aerial or 3D images. Digital heritage is also used to monitor cultural heritage sites over years to help with preservation, maintenance, and sustainable tourism. It aims to observe any changes, diseases, or deterioration that may occur on objects. == Cultural and natural heritage == Digital Heritage that is not born-digital can be divided into two separate groups—digital cultural heritage and digital natural heritage. Digital cultural heritage is the maintenance or preservation of cultural objects through digitization. These are objects, in some cases entire cities, that are considered of cultural importance. These objects are sometimes able to be digitized or physically represented in minute detail. Digital cultural heritage also includes intangible heritage. These are things such as "oral traditions, customs, value systems, skills, traditional dances, diets, performances" and other unique features of a culture. Intangible heritage is particularly vulnerable to destruction due to urbanization. There are several projects and programs which concentrate on digital cultural heritage. One such project is Mapping Gothic France, which aims to document and preserve cathedrals across France using images, VR tours, laser scans, and panoramas. This allows for scientific and historical study and preservation of the cathedrals and also provides detailed access to the sites for anyone in the world. The aim of projects like these is to help with the preservation and restoration of cultural objects. After the fire at Notre-Dame de Paris in 2019, digital scans are a major component in the ongoing restoration. Digital natural heritage pertains to objects of natural heritage that are considered of cultural, scientific, or aesthetic importance. Digital heritage in this instance is used not only to grant access to these objects, but to monitor any changes over time, such as with plant or animal habitats. Geographic information systems are a form of technology that is used primarily in the study of natural heritage. Western Australia has one such digital heritage project where they have created a digital repository of native plants important to both the region and the Aboriginal people. This is in order to protect and preserve the important biological heritage of Western Australia. == Educational impact == The digitization of these heritage objects has impacts around the world and across many disciplines. The increase of digital items means that people, especially the youth, are able to learn about new objects and cultures online through various media. They provide viewers with a more in-depth experience with an item or place, instead of just an image. The media is also able to be curated to age- or educational-level appropriateness, making learning easier. Some of the technology used in education, especially in museums, includes mobile apps, virtual reality, social media, and video games. Cultural heritage institutions are using this technology to try to expand access, increase appreciation for these items, and to gain new viewpoints on their collections. Digital heritage also helps scientists, archeologists, or other historians and specialists collect data on these objects, providing more information on the objects and the past. Digital Heritage is still currently being studied and improved by several sectors invested in cultural and intellectual preservation. It is particularly of interest to museums, governments, and academic institutions. Research by these groups are creating new concepts, methodologies, and techniques for the implementation of digital heritage to protect this type of cultural and natural heritage. As new technologies are created, museums and other heritage institutions are provided with more ways of disseminating their information and engaging with the public. A lack of resources within certain groups may still hinder everyone from accessing digital heritage. == Technologies used == The digitization of cultural heritage is attained through several means. Some of the main technology used is spatial and surveying technology. Space archaeological technology - Observations from space satellites are non-intrusive and can be integrated with other technologies on the ground. It is used to photograph vast areas of earth and help with research. Remnants of ancient civilizations or other human objects are also able to be spotted via satellite imaging. Unmanned aerial vehicles - UAV, such as drones, are commonly used in digitization of cultural heritage objects. The Great Wall of China is one such site that has been digitized and analyzed through unmanned aerial vehicle investigation. The resulting images, 3-D scans, maps, and other data are used to evaluate and maintain the Great Wall. Laser Scanning - Laser scanning is used to scan an area and recreate spatially accurate depictions, such as a 3D model. Virtual and Augmented Reality - VR is used primarily for education but does have uses for reconstruction and research. It is used to provide users with an immersive experience, as though they are actually at the site. Geographic Information systems - GIS are used primarily to study objects and sites over time. It is also important in studying the socioeconomic status of the past. 3D Modeling - 3D modeling has become more widely used due to an increase in technology that works specifically with heritage sites. It is often used in tandem with GIS to reconstruct objects for restoration, documentation, preservation, and educational purposes. Data is collected using satellite or other aerial imaging and ground-based imaging. There is some concern about the accuracy and authenticity of these types of digital reconstructions and their effects on the sites themselves. A major barrier to digital heritage is the amount of resources it takes to undertake such projects, such as money, time, and technology. Money and the lack of qualified personnel are two that are considered the most obstructive. This is especially an issue in less developed areas or within underfunded groups such as minorities. == Virtual heritage == A particular branch of digital heritage, known as "virtual heritage", is formed by the use of information technology with the aim of recreating the experience of existing cultural heritage, as in (approximations of) virtual reality. It is hard to differentiate this branch from the core contribution of digital heritage which is storing the heritage data digitally. Parsinejad et al. developed two techniques for Digital Twinning of the architectural assets and representation of the physical assets virtually in the museum context. Two techniques are hand recording and digital recording and both have challenges in adoption and implementation of Digital Twin as a revolutionary concept. == Digital heritage stewardship == Digital heritage stewardship is a form of digital curation which is modeled after collaborative curation. Digital heritage stewardship means stepping away from typical curatorial practices (e.g. discovering, arranging, and sharing information, material, and/or content) in favor of practices which allow its stakeholders the opportunity to contribute historical, political, and social context and culture. The collaborative practice encourages the creation, engagement, and maintena

  Read more →
• 

  PDE surface

  PDE surfaces are used in geometric modelling and computer graphics for creating smooth surfaces conforming to a given boundary configuration. PDE surfaces use partial differential equations to generate a surface which usually satisfy a mathematical boundary value problem. PDE surfaces were first introduced into the area of geometric modelling and computer graphics by two British mathematicians, Malcolm Bloor and Michael Wilson. == Technical details == The PDE method involves generating a surface for some boundary by means of solving an elliptic partial differential equation of the form ( ∂ 2 ∂ u 2 + a 2 ∂ 2 ∂ v 2 ) 2 X ( u , v ) = 0. {\displaystyle \left({\frac {\partial ^{2}}{\partial u^{2}}}+a^{2}{\frac {\partial ^{2}}{\partial v^{2}}}\right)^{2}X(u,v)=0.} Here X ( u , v ) {\displaystyle X(u,v)} is a function parameterised by the two parameters u {\displaystyle u} and v {\displaystyle v} such that X ( u , v ) = ( x ( u , v ) , y ( u , v ) , z ( u , v ) ) {\displaystyle X(u,v)=(x(u,v),y(u,v),z(u,v))} where x {\displaystyle x} , y {\displaystyle y} and z {\displaystyle z} are the usual cartesian coordinate space. The boundary conditions on the function X ( u , v ) {\displaystyle X(u,v)} and its normal derivatives ∂ X / ∂ n {\displaystyle \partial {X}/\partial {n}} are imposed at the edges of the surface patch. With the above formulation it is notable that the elliptic partial differential operator in the above PDE represents a smoothing process in which the value of the function at any point on the surface is, in some sense, a weighted average of the surrounding values. In this way, a surface is obtained as a smooth transition between the chosen set of boundary conditions. The parameter a {\displaystyle a} is a special design parameter which controls the relative smoothing of the surface in the u {\displaystyle u} and v {\displaystyle v} directions. When a = 1 {\displaystyle a=1} , the PDE is the biharmonic equation: X u u u u + 2 X u u v v + X v v v v = 0 {\displaystyle X_{uuuu}+2X_{uuvv}+X_{vvvv}=0} . The biharmonic equation is the equation produced by applying the Euler-Lagrange equation to the simplified thin plate energy functional X u u 2 + 2 X u v 2 + X v v 2 {\displaystyle X_{uu}^{2}+2X_{uv}^{2}+X_{vv}^{2}} . So solving the PDE with a = 1 {\displaystyle a=1} is equivalent to minimizing the thin plate energy functional subject to the same boundary conditions. == Applications == PDE surfaces can be used in many application areas. These include computer-aided design, interactive design, parametric design, computer animation, computer-aided physical analysis and design optimisation. == Related publications == M.I.G. Bloor and M.J. Wilson, Generating Blend Surfaces using Partial Differential Equations, Computer Aided Design, 21(3), 165–171, (1989). H. Ugail, M.I.G. Bloor, and M.J. Wilson, Techniques for Interactive Design Using the PDE Method, ACM Transactions on Graphics, 18(2), 195–212, (1999). J. Huband, W. Li and R. Smith, An Explicit Representation of Bloor-Wilson PDE Surface Model by using Canonical Basis for Hermite Interpolation, Mathematical Engineering in Industry, 7(4), 421-33 (1999). H. Du and H. Qin, Direct Manipulation and Interactive Sculpting of PDE surfaces, Computer Graphics Forum, 19(3), C261-C270, (2000). H. Ugail, Spine Based Shape Parameterisations for PDE surfaces, Computing, 72, 195–204, (2004). L. You, P. Comninos, J.J. Zhang, PDE Blending Surfaces with C2 Continuity, Computers and Graphics, 28(6), 895–906, (2004).

  Read more →
• 

  Usage share of operating systems

  The usage share of an operating system is the percentage of computers running that operating system (OS). These statistics are estimates as wide scale OS usage data is difficult to obtain and measure. Reliable primary sources are limited and data collection methodology is not formally agreed. Currently devices connected to the internet allow for web data collection to approximately measure OS usage. As of December 2025, Android, which uses the Linux kernel, is the world's most popular operating system with 38.94% of the global market, followed by Windows with 29.99%, iOS with 15.66%, macOS with 2.14%, and other operating systems with 10.78%. This is for all device types excluding embedded devices. For smartphones and other mobile devices, Android has 72% market share, and Apple's iOS has 28%. For desktop computers and laptops, Microsoft Windows has 60.8%, followed by unknown operating systems at 19.7%, Mac OS at 14.4%, desktop Linux at 3.2%, then Google's ChromeOS at 1.6%, as of March 2026. For tablets, Apple's iPadOS (a variant of iOS) has 52% share and Android has 48% worldwide. For the top 500 most powerful supercomputers, Linux distributions have had 100% of the market share since 2017. The global server operating system market share has Linux leading with a 63.1% marketshare, followed by Windows, Unix and other operating systems. Linux is also most used for web servers, and the most common Linux distribution is Ubuntu, followed by Debian. Linux has almost caught up with the second-most popular (desktop) OS, macOS, in some regions, such as in South America, and in Asia it's at 6.4% (7% with ChromeOS) vs 9.7% for macOS. In the US, ChromeOS is third at 5.5%, followed by (desktop) Linux at 4.3%. The most numerous type of device with an operating system are embedded systems. Not all embedded systems have operating systems, instead running their application code on the "bare metal"; of those that do have operating systems, a high percentage are standalone or do not have a web browser, which makes their usage share difficult to measure. Some operating systems used in embedded systems are more widely used than some of those mentioned above; for example, modern Intel microprocessors contain an embedded management processor running a version of the Minix operating system. == Worldwide device shipments == Shipments (to stores) do not necessarily translate to sales to consumers, therefore suggesting the numbers indicate popularity and/or usage could be misleading. Not only do smartphones sell in higher numbers than PCs, but also a lot more by dollar value, with the gap only projected to widen, to well over double. According to Gartner, the following is the worldwide device shipments (referring to wholesale) by operating system from 2012 to 2016, which includes smartphones, tablets, laptops and PCs together. On 27 January 2016, Paul Thurrott summarized the operating system market, the day after Apple announced "one billion devices": Apple's "active installed base" is now one billion devices. [..] Granted, some of those Apple devices were probably sold into the marketplace years ago. But that 1 billion figure can and should be compared to the numbers Microsoft touts for Windows 10 (200 million, most recently) or Windows more generally (1.5 billion active users, a number that hasn’t moved, magically, in years), and that Google touts for Android (over 1.4 billion, as of September). My understanding of iOS is that the user base was previously thought to be around 800 million strong, and when you factor out Macs and other non-iOS Apple devices, that's probably about right. But as you can see, there are three big personal computing platforms. And only one of them is actually declining. We’ll see how Windows 10 fares over the long term, but even if Microsoft hits the 1 billion figure in 1-2 years as promised, it will by then still be the smallest of those three platforms. In 2018, Apple stopped revealing unit sales in its reports. Since 2018, the company have been publishing only revenues per device models which, nonetheless, allowed the analysers to extrapolate the unit sales from the model revenues by applying the wholesale device prices. Other hardware manufacturers usually do not report unit sales. === PC shipments === For 2015 (and earlier), Gartner reports for "the year, worldwide PC shipments declined for the fourth consecutive year, which started in 2012 with the launch of tablets" with an 8% decline in PC sales for 2015 (not including cumulative decline in sales over the previous years). Microsoft backed away from their goal of one billion Windows 10 devices in three years (or "by the middle of 2018") and reported on 26 September 2016 that Windows 10 was running on over 400 million devices, and in March 2019, on more than 800 million. In May 2020, Gartner predicted further decline in all market segments for 2020 due to COVID-19, predicting a decline of 13.6% for all devices. while the "Work from Home Trend Saved PC Market from Collapse", with only a decline of 10.5% predicted for PCs. However, in the end, according to Gartner, PC shipments grew 10.7% in the fourth quarter of 2020 and reached 275 million units in 2020, a 4.8% increase from 2019 and the highest growth in ten years." Apple in 4th place for PCs had the largest growth in shipments for a company in Q4 of 31.3%, while "the fourth quarter of 2020 was another remarkable period of growth for Chromebooks, with shipments increasing around 200% year over year to reach 11.7 million units. In 2020, Chromebook shipments increased over 80% to total nearly 30 million units, largely due to demand from the North American education market." Chromebooks sold more (30 million) than Apple's Macs worldwide (22.5 million) in pandemic year 2020. According to the Catalyst group, the year 2021 had record high PC shipments with total shipments of 341 million units (including Chromebooks), 15% higher than 2020 and 27% higher than 2019, while being the largest shipment total since 2012. According to Gartner, worldwide PC shipments declined by 16.2% in 2022, the largest annual decrease since the mid-1990s, due to geopolitical, economic, and supply chain challenges. In 2024 and 2025, due to lower adoption of Windows 11 and Microsoft ending its support to Windows 10, the number of PCs shipped with pre-installed Windows OS dropped. Pundits attribute the low Windows 11 acceptance to its steep hardware requirements and especially the TPM 2.0 ready chipset requirement and the 2024 CrowdStrike-related IT outages. Meanwhile, the macOS device market share in PC device shipments increased to new heights, with improved numbers seen for Linux devices too. In Q3 2025, the macOS pre-installed device shipments increased by 14.9% year-over-year (YoY), while the overall PC-shipments increased only by 8.1%, in Q2 2025, it grew 21.4% YoY while the global PC-shipments increased only by 6.5%, and in Q1 2025, it grew 7% YoY while the global PC-shipments increased by 4.8%. === Tablet computers shipments === In 2015, eMarketer estimated at the beginning of the year that the tablet installed base would hit one billion for the first time (with China's use at 328 million, which Google Play doesn't serve or track, and the United States's use second at 156 million). At the end of the year, because of cheap tablets – not counted by all analysts – that goal was met (even excluding cumulative sales of previous years) as: Sales quintupled to an expected 1 billion units worldwide this year, from 216 million units in 2014, according to projections from the Envisioneering Group. While that number is far higher than the 200-plus million units globally projected by research firms IDC, Gartner and Forrester, Envisioneering analyst Richard Doherty says the rival estimates miss all the cheap Asian knockoff tablets that have been churning off assembly lines.[..] Forrester says its definition of tablets "is relatively narrow" while IDC says it includes some tablets by Amazon — but not all.[..] The top tech purchase of the year continued to be the smartphone, with an expected 1.5 billion sold worldwide, according to projections from researcher IDC. Last year saw some 1.2 billion sold.[..] Computers didn’t fare as well, despite the introduction of Microsoft's latest software upgrade, Windows 10, and the expected but not realized bump it would provide for consumers looking to skip the upgrade and just get a new computer instead. Some 281 million PCs were expected to be sold, according to IDC, down from 308 million in 2014. Folks tend to be happy with the older computers and keep them for longer, as more of our daily computing activities have moved to the smartphone.[..] While Windows 10 got good reviews from tech critics, only 11% of the 1-billion-plus Windows user base opted to do the upgrade, according to Microsoft. This suggests Microsoft has a ways to go before the software gets "hit" status. Apple's new operating system El Capitan has been

  Read more →
• 

  Digital Cinema Package

  A Digital Cinema Package (DCP) is a collection of digital files used to store and convey digital cinema (DC) audio, image, and data streams. The term was popularized by Digital Cinema Initiatives, LLC in its original recommendation for packaging DC contents. However, the industry tends to apply the term to the structure more formally known as the composition. A DCP is a container format for compositions, a hierarchical file structure that represents a title version. The DCP may carry a partial composition (e.g. not a complete set of files), a single complete composition, or multiple and complete compositions. The composition consists of a Composition Playlist (in XML format) that defines the playback sequence of a set of Track Files. Track Files carry the essence (audio, image, subtitles), which is wrapped using Material eXchange Format (MXF). Track Files must contain only one essence type. Two track files at a minimum must be present in every composition (see SMPTE ST429-2 D-Cinema Packaging – DCP Constraints, or Cinepedia): a track file carrying picture essence, and a track file carrying audio essence. The composition, consisting of a Composition Playlist (CPL) and associated track files, are distributed as a Digital Cinema Package (DCP). A composition is a complete representation of a title version, while the DCP need not carry a full composition. However, as already noted, it is commonplace in the industry to discuss the title in terms of a DCP, as that is the deliverable to the cinema. The Picture Track File essence is compressed using JPEG 2000 and the Audio Track File carries a 24-bit linear PCM uncompressed multichannel WAV file. Encryption may optionally be applied to the essence of a track file to protect it from unauthorized use. The encryption used is AES 128-bit in CBC mode. In practice, there are two versions of composition in use. The original version is called Interop DCP. In 2009, a specification was published by SMPTE (SMPTE ST 429-2 Digital Cinema Packaging – DCP Constraints) for what is commonly referred to as SMPTE DCP. SMPTE DCP is similar but not backwards compatible with Interop DCP, resulting in an uphill effort to transition the industry from Interop DCP to SMPTE DCP. SMPTE DCP requires significant constraints to ensure success in the field, as shown by ISDCF. While legacy support for Interop DCP is necessary for commercial products, new productions are encouraged to be distributed in SMPTE DCP. == Technical specifications == The DCP root folder (in the storage medium) contains a number of files, some used to store the image and audio contents, and some other used to organize and manage the whole playlist. === Picture MXF files === Picture contents may be stored in one or more reels corresponding to one or more MXF files. Each reel contains pictures as MPEG-2 or JPEG 2000 essence, depending on the adopted codec. MPEG-2 is no longer compliant with the DCI specification. JPEG 2000 is the only accepted compression format. Supported frame rates are: SMPTE (JPEG 2000) 24, 25, 30, 48, 50, and 60 fps @ 2K 24, 25, and 30 fps @ 4K 24 and 48 fps @ 2K stereoscopic MXF Interop (JPEG 2000) – Deprecated 24 and 48 fps @ 2K (MXF Interop can be encoded at 25 frame/s but support is not guaranteed) 24 fps @ 4K 24 fps @ 2K stereoscopic MXF Interop (MPEG-2) – Deprecated 23.976 and 24 fps @ 1920 × 1080 Maximum frame sizes are 2048 × 1080 for 2K DC, and 4096 × 2160 for 4K DC. Common formats are: SMPTE (JPEG 2000) Flat (1998 × 1080 or 3996 × 2160), = 1.85:1 aspect ratio Scope (2048 × 858 or 4096 × 1716), ~2.39:1 aspect ratio HDTV (1920 × 1080 or 3840 × 2160), 16:9 aspect ratio (~1.78:1) (although not specifically defined in the DCI specification, this resolution is DCI compliant per section 8.4.3.2). Full (2048 × 1080 or 4096 × 2160) (~1.9:1 aspect ratio, official name by DCI is Full Container. Not widely accepted in cinemas.) MXF Interop (MPEG-2) – Deprecated Full Frame (1920 × 1080) 12 bits per component precision (36 bits total per pixel) XYZ' colorspace; the prime mark indicates gamma encoding (gamma=2.6) Maximum bit rate is 250 Mbit/s (1.3 MBytes per frame at 24 frame per second) === Sound MXF files === Sound contents are also stored in reels corresponding to picture reels in number and duration. In case of multilingual features, separate reels are required to convey different languages. Each file contains linear PCM essence. Sampling rate is 48,000 or 96,000 samples per second Sample precision of 24 bits Linear mapping (no companding) Up to 16 independent channels === Asset map file === List of all files included in the DCP, in XML format. === Composition playlist file === Defines the playback order during presentation. The order is saved in XML format in this file; each picture and sound reel is identified by its UUID. In the following example, a reel is composed by picture and sound: === Packing list file or package key list (PKL) === All files in the composition are hashed and their hash is stored here, in XML format. This file is generally used during ingestion in a digital cinema server to verify if data have been corrupted or tampered with in some way. For example, an MXF picture reel is identified by the following element: The hash value is the Base64 encoding of the SHA-1 checksum. It can be calculated with the command: openssl sha1 -binary "FILE_NAME" | openssl base64 === Volume index file === A single DCP may be stored in more than one medium (e.g., multiple hard disks). The XML file VOLINDEX is used to identify the volume order in the series. == 3D DCP == The DCP format is also used to store stereoscopic (3D) contents for 3D films. In this case, 48 frames exist for every second – 24 frames for the left eye, 24 frames for the right. Depending on the projection system used, the left eye and right eye pictures are either shown alternately (double or triple flash systems) at 48 fps or, on 4k systems, both left and right eye pictures are shown simultaneously, one above the other, at 24 fps. In triple flash systems, active shutter glasses are required whereas optical filtering such as circular polarisation is used in conjunction with passive glasses on polarized systems. Since the maximum bit rate is always 250 Mbit/s, this results in a net 125 Mbit/s for single frame, but the visual quality decrease is generally unnoticeable. == D-Box == D-Box codes for motion controlled seating (labelled as "Motion Data" in the DCP specification), if present, are stored as a monoaural WAV file on Sound Track channel 13. Motion Data tracks are unencrypted and not watermarked. == Creation == Most film producers and distributors rely on digital cinema encoding facilities to produce and quality control check a digital cinema package before release. Facilities follow strict guidelines set out in the DCI recommendations to ensure compatibility with all digital cinema equipment. For bigger studio release films, the facility will usually create a Digital Cinema Distribution Master (DCDM). A DCDM is the post-production step prior to a DCP. The frames are in XYZ TIFF format and both sound and picture are not yet wrapped into MXF files. A DCP can be encoded directly from a DCDM. A DCDM is useful for archiving purposes and also facilities can share them for international re-versioning purposes. They can easily be turned into alternative version DCPs for foreign territories. For smaller release films, the facility will usually skip the creation of a DCDM and instead encode directly from the Digital Source Master (DSM) the original film supplied to the encoding facility. A DSM can be supplied in a multitude of formats and color spaces. For this reason, the encoding facility needs to have extensive knowledge in color space handling including, on occasion, the use of 3D LUTs to carefully match the look of the finished DCP to a celluloid film print. This can be a highly involved process in which the DCP and the film print are "butterflied" (shown side by side) in a highly calibrated cinema. Less demanding DCPs are encoded from tape formats such as HDCAM SR. Quality control checks are always performed in calibrated cinemas and carefully checked for errors. QC checks are often attended by colorists, directors, sound mixers and other personnel to check for correct picture and sound reproduction in the finished DCP. == Accessibility == === Hearing impaired audio === A Hearing Impaired (HI) audio track is designed for people who are hearing-impaired to better hear dialog. Moviegoers can wear headphones which play this audio track synchronized with the film. Hearing Impaired audio is stored in the DCP on Sound Track channel 7. === Audio description === Audio description is narration for people who are blind or visually impaired. Audio description is stored in the DCP as "Visually Impaired-Native" (VI-N) audio on Sound Track channel 8. === Sign Language Video === A Sign Language Video track can be included in a DCP to allow for display of sign la

  Read more →