AI Grammar Sentence Checker

AI Grammar Sentence Checker — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Autocommit

  In the context of data management, autocommit is a mode of operation of a database connection. Each individual database interaction (i.e., each SQL statement) submitted through the database connection in autocommit mode will be executed in its own transaction that is implicitly committed. A SQL statement executed in autocommit mode cannot be rolled back. Autocommit mode incurs per-statement transaction overhead and can often lead to undesirable performance or resource utilization impact on the database. Nonetheless, in systems such as Microsoft SQL Server, as well as connection technologies such as ODBC and Microsoft OLE DB, autocommit mode is the default for all statements that change data, in order to ensure that individual statements will conform to the ACID (atomicity-consistency-isolation-durability) properties of transactions. The alternative to autocommit mode (non-autocommit) means that the SQL client application itself is responsible for ending transactions explicitly via the commit or rollback SQL commands. Non-autocommit mode enables grouping of multiple data manipulation SQL commands into a single atomic transaction. Some DBMS (e.g. MariaDB) force autocommit for every DDL statement, even in non-autocommit mode. In this case, before each DDL statement, previous DML statements in transaction are autocommitted. Each DDL statement is executed in its own new autocommit transaction.

  Read more →
• 

  Causal Markov condition

  The Causal Markov (CM) condition states that, conditional on the set of all its direct causes, a node is independent of all variables which are not effects or direct causes of that node. In the event that the structure of a Bayesian network accurately depicts causality, the two conditions are equivalent. This is related to the Markov condition, an assumption made in Bayesian probability theory, that every node in a Bayesian network is conditionally independent of its nondescendants, given its parents. Stated loosely, it is assumed that a node has no bearing on nodes which do not descend from it. In a DAG, this local Markov condition is equivalent to the global Markov condition, which states that d-separations in the graph also correspond to conditional independence relations. This also means that a node is conditionally independent of the entire network, given its Markov blanket. A network may accurately embody the Markov condition without depicting causality, in which case it should not be assumed to embody the causal Markov condition. == Motivation == Statisticians are enormously interested in the ways in which certain events and variables are connected. The precise notion of what constitutes a cause and effect is necessary to understand the connections between them. The central idea behind the philosophical study of probabilistic causation is that causes raise the probabilities of their effects, all else being equal. A deterministic interpretation of causation means that if A causes B, then A must always be followed by B. In this sense, smoking does not cause cancer because some smokers never develop cancer. On the other hand, a probabilistic interpretation simply means that causes raise the probability of their effects. In this sense, changes in meteorological readings associated with a storm do cause that storm, since they raise its probability. (However, simply looking at a barometer does not change the probability of the storm, for a more detailed analysis, see:). == Examples == In a simple view, releasing one's hand from a hammer causes the hammer to fall. However, doing so in outer space does not produce the same outcome, calling into question if releasing one's fingers from a hammer always causes it to fall. A causal graph could be created to acknowledge that both the presence of gravity and the release of the hammer contribute to its falling. However, it would be very surprising if the surface underneath the hammer affected its falling. This essentially states the Causal Markov Condition, that given the existence of gravity the release of the hammer, it will fall regardless of what is beneath it. == Implications == === Dependence and Causation === It follows from the definition that if X and Y are in V and are probabilistically dependent, then either X causes Y, Y causes X, or X and Y are both effects of some common cause Z in V. This definition was seminally introduced by Hans Reichenbach as the Common Cause Principle (CCP). === Screening === It once again follows from the definition that the parents of X screen X from other "indirect causes" of X (parents of Parents(X)) and other effects of Parents(X) which are not also effects of X.

  Read more →
• 

  Oja's rule

  Oja's learning rule, or simply Oja's rule, named after Finnish computer scientist Erkki Oja (Finnish pronunciation: [ˈojɑ], AW-yuh), is a model of how neurons in the brain or in artificial neural networks change connection strength, or learn, over time. It is a modification of the standard Hebb's Rule that, through multiplicative normalization, solves all stability problems and generates an algorithm for principal components analysis. This is a computational form of an effect which is believed to happen in biological neurons. == Theory == Oja's rule requires a number of simplifications to derive, but in its final form it is demonstrably stable, unlike Hebb's rule. It is a single-neuron special case of the Generalized Hebbian Algorithm. However, Oja's rule can also be generalized in other ways to varying degrees of stability and success. === Formula === Consider a simplified model of a neuron y {\displaystyle y} that returns a linear combination of its inputs x using presynaptic weights w: y ( x ) = ∑ j = 1 m x j w j {\displaystyle \,y(\mathbf {x} )~=~\sum _{j=1}^{m}x_{j}w_{j}} Oja's rule defines the change in presynaptic weights w given the output response y {\displaystyle y} of a neuron to its inputs x to be Δ w = w n + 1 − w n = η y n ( x n − y n w n ) , {\displaystyle \,\Delta \mathbf {w} ~=~\mathbf {w} _{n+1}-\mathbf {w} _{n}~=~\eta \,y_{n}(\mathbf {x} _{n}-y_{n}\mathbf {w} _{n}),} where η is the learning rate which can also change with time. Note that the bold symbols are vectors and n defines a discrete time iteration. The rule can also be made for continuous iterations as d w d t = η y ( t ) ( x ( t ) − y ( t ) w ( t ) ) . {\displaystyle \,{\frac {d\mathbf {w} }{dt}}~=~\eta \,y(t)(\mathbf {x} (t)-y(t)\mathbf {w} (t)).} === Derivation === The simplest learning rule known is Hebb's rule, which states in conceptual terms that neurons that fire together, wire together. In component form as a difference equation, it is written Δ w = η y ( x n ) x n {\displaystyle \,\Delta \mathbf {w} ~=~\eta \,y(\mathbf {x} _{n})\mathbf {x} _{n}} , or in scalar form with implicit n-dependence, w i ( n + 1 ) = w i ( n ) + η y ( x ) x i {\displaystyle \,w_{i}(n+1)~=~w_{i}(n)+\eta \,y(\mathbf {x} )x_{i}} , where y(xn) is again the output, this time explicitly dependent on its input vector x. Hebb's rule has synaptic weights approaching infinity with a positive learning rate. We can stop this by normalizing the weights so that each weight's magnitude is restricted between 0, corresponding to no weight, and 1, corresponding to being the only input neuron with any weight. We do this by normalizing the weight vector to be of length one: w i ( n + 1 ) = w i ( n ) + η y ( x ) x i ( ∑ j = 1 m [ w j ( n ) + η y ( x ) x j ] p ) 1 / p {\displaystyle \,w_{i}(n+1)~=~{\frac {w_{i}(n)+\eta \,y(\mathbf {x} )x_{i}}{\left(\sum _{j=1}^{m}[w_{j}(n)+\eta \,y(\mathbf {x} )x_{j}]^{p}\right)^{1/p}}}} . Note that in Oja's original paper, p=2, corresponding to quadrature (root sum of squares), which is the familiar Cartesian normalization rule. However, any type of normalization, even linear, will give the same result without loss of generality. For a small learning rate | η | ≪ 1 {\displaystyle |\eta |\ll 1} the equation can be expanded as a Power series in η {\displaystyle \eta } . w i ( n + 1 ) = w i ( n ) ( ∑ j w j p ( n ) ) 1 / p + η ( y x i ( ∑ j w j p ( n ) ) 1 / p − w i ( n ) ∑ j y x j w j p − 1 ( n ) ( ∑ j w j p ( n ) ) ( 1 + 1 / p ) ) + O ( η 2 ) {\displaystyle \,w_{i}(n+1)~=~{\frac {w_{i}(n)}{\left(\sum _{j}w_{j}^{p}(n)\right)^{1/p}}}~+~\eta \left({\frac {yx_{i}}{\left(\sum _{j}w_{j}^{p}(n)\right)^{1/p}}}-{\frac {w_{i}(n)\sum _{j}yx_{j}w_{j}^{p-1}(n)}{\left(\sum _{j}w_{j}^{p}(n)\right)^{(1+1/p)}}}\right)~+~O(\eta ^{2})} . For small η, our higher-order terms O(η2) go to zero. We again make the specification of a linear neuron, that is, the output of the neuron is equal to the sum of the product of each input and its synaptic weight to the power of p-1, which in the case of p=2 is synaptic weight itself, or y ( x ) = ∑ j = 1 m x j w j p − 1 {\displaystyle \,y(\mathbf {x} )~=~\sum _{j=1}^{m}x_{j}w_{j}^{p-1}} . We also specify that our weights normalize to 1, which will be a necessary condition for stability, so | w | = ( ∑ j = 1 m w j p ) 1 / p = 1 {\displaystyle \,|\mathbf {w} |~=~\left(\sum _{j=1}^{m}w_{j}^{p}\right)^{1/p}~=~1} , which, when substituted into our expansion, gives Oja's rule, or w i ( n + 1 ) = w i ( n ) + η y ( x i − w i ( n ) y ) {\displaystyle \,w_{i}(n+1)~=~w_{i}(n)+\eta \,y(x_{i}-w_{i}(n)y)} . === Stability and PCA === In analyzing the convergence of a single neuron evolving by Oja's rule, one extracts the first principal component, or feature, of a data set. Furthermore, with extensions using the Generalized Hebbian Algorithm, one can create a multi-Oja neural network that can extract as many features as desired, allowing for principal components analysis. A principal component aj is extracted from a dataset x through some associated vector qj, or aj = qj⋅x, and we can restore our original dataset by taking x = ∑ j a j q j {\displaystyle \mathbf {x} ~=~\sum _{j}a_{j}\mathbf {q} _{j}} . In the case of a single neuron trained by Oja's rule, we find the weight vector converges to q1, or the first principal component, as time or number of iterations approaches infinity. We can also define, given a set of input vectors Xi, that its correlation matrix Rij = XiXj has an associated eigenvector given by qj with eigenvalue λj. The variance of outputs of our Oja neuron σ2(n) = ⟨y2(n)⟩ then converges with time iterations to the principal eigenvalue, or lim n → ∞ σ 2 ( n ) = λ 1 {\displaystyle \lim _{n\rightarrow \infty }\sigma ^{2}(n)~=~\lambda _{1}} . These results are derived using Lyapunov function analysis, and they show that Oja's neuron necessarily converges on strictly the first principal component if certain conditions are met in our original learning rule. Most importantly, our learning rate η is allowed to vary with time, but only such that its sum is divergent but its power sum is convergent, that is ∑ n = 1 ∞ η ( n ) = ∞ , ∑ n = 1 ∞ η ( n ) p < ∞ , p > 1 {\displaystyle \sum _{n=1}^{\infty }\eta (n)=\infty ,~~~\sum _{n=1}^{\infty }\eta (n)^{p}<\infty ,~~~p>1} . Our output activation function y(x(n)) is also allowed to be nonlinear and nonstatic, but it must be continuously differentiable in both x and w and have derivatives bounded in time. == Applications == Oja's rule was originally described in Oja's 1982 paper, but the principle of self-organization to which it is applied is first attributed to Alan Turing in 1952. PCA has also had a long history of use before Oja's rule formalized its use in network computation in 1989. The model can thus be applied to any problem of self-organizing mapping, in particular those in which feature extraction is of primary interest. Therefore, Oja's rule has an important place in image and speech processing. It is also useful as it expands easily to higher dimensions of processing, thus being able to integrate multiple outputs quickly. A canonical example is its use in binocular vision. === Biology and Oja's subspace rule === There is clear evidence for both long-term potentiation and long-term depression in biological neural networks, along with a normalization effect in both input weights and neuron outputs. However, while there is no direct experimental evidence yet of Oja's rule active in a biological neural network, a biophysical derivation of a generalization of the rule is possible. Such a derivation requires retrograde signalling from the postsynaptic neuron, which is biologically plausible (see neural backpropagation), and takes the form of Δ w i j ∝ ⟨ x i y j ⟩ − ϵ ⟨ ( c p r e ∗ ∑ k w i k y k ) ⋅ ( c p o s t ∗ y j ) ⟩ , {\displaystyle \Delta w_{ij}~\propto ~\langle x_{i}y_{j}\rangle -\epsilon \left\langle \left(c_{\mathrm {pre} }\sum _{k}w_{ik}y_{k}\right)\cdot \left(c_{\mathrm {post} }y_{j}\right)\right\rangle ,} where as before wij is the synaptic weight between the ith input and jth output neurons, x is the input, y is the postsynaptic output, and we define ε to be a constant analogous the learning rate, and cpre and cpost are presynaptic and postsynaptic functions that model the weakening of signals over time. Note that the angle brackets denote the average and the ∗ operator is a convolution. By taking the pre- and post-synaptic functions into frequency space and combining integration terms with the convolution, we find that this gives an arbitrary-dimensional generalization of Oja's rule known as Oja's Subspace, namely Δ w = C x ⋅ w − w ⋅ C y . {\displaystyle \Delta w~=~Cx\cdot w-w\cdot Cy.}

  Read more →
• 

  Plate notation

  In Bayesian inference, plate notation is a method of representing variables that repeat in a graphical model. Instead of drawing each repeated variable individually, a plate or rectangle is used to group variables into a subgraph that repeat together, and a number is drawn on the plate to represent the number of repetitions of the subgraph in the plate. The assumptions are that the subgraph is duplicated that many times, the variables in the subgraph are indexed by the repetition number, and any links that cross a plate boundary are replicated once for each subgraph repetition. == Example == In this example, we consider Latent Dirichlet allocation, a Bayesian network that models how documents in a corpus are topically related. There are two variables not in any plate; α is the parameter of the uniform Dirichlet prior on the per-document topic distributions, and β is the parameter of the uniform Dirichlet prior on the per-topic word distribution. The outermost plate represents all the variables related to a specific document, including θ i {\displaystyle \theta _{i}} , the topic distribution for document i. The M in the corner of the plate indicates that the variables inside are repeated M times, once for each document. The inner plate represents the variables associated with each of the N i {\displaystyle N_{i}} words in document i: z i j {\displaystyle z_{ij}} is the topic distribution for the jth word in document i, and w i j {\displaystyle w_{ij}} is the actual word used. The N in the corner represents the repetition of the variables in the inner plate N j {\displaystyle N_{j}} times, once for each word in document i. The circle representing the individual words is shaded, indicating that each w i j {\displaystyle w_{ij}} is observable, and the other circles are empty, indicating that the other variables are latent variables. The directed edges between variables indicate dependencies between the variables: for example, each w i j {\displaystyle w_{ij}} depends on z i j {\displaystyle z_{ij}} and β. == Extensions == A number of extensions have been created by various authors to express more information than simply the conditional relationships. However, few of these have become standard. Perhaps the most commonly used extension is to use rectangles in place of circles to indicate non-random variables—either parameters to be computed, hyperparameters given a fixed value (or computed through empirical Bayes), or variables whose values are computed deterministically from a random variable. The diagram on the right shows a few more non-standard conventions used in some articles in Wikipedia (e.g. variational Bayes): Variables that are actually random vectors are indicated by putting the vector size in brackets in the middle of the node. Variables that are actually random matrices are similarly indicated by putting the matrix size in brackets in the middle of the node, with commas separating row size from column size. Categorical variables are indicated by placing their size (without a bracket) in the middle of the node. Categorical variables that act as "switches", and which pick one or more other random variables to condition on from a large set of such variables (e.g. mixture components), are indicated with a special type of arrow containing a squiggly line and ending in a T junction. Boldface is consistently used for vector or matrix nodes (but not categorical nodes). == Software implementation == Plate notation has been implemented in various TeX/LaTeX drawing packages, but also as part of graphical user interfaces to Bayesian statistics programs such as BUGS and BayesiaLab and PyMC.

  Read more →
• 

  Learning rate

  In machine learning and statistics, the learning rate is a tuning parameter in an optimization algorithm that determines the step size at each iteration while moving toward a minimum of a loss function. Since it influences to what extent newly acquired information overrides old information, it metaphorically represents the speed at which a machine learning model "learns". In the adaptive control literature, the learning rate is commonly referred to as gain. In setting a learning rate, there is a trade-off between the rate of convergence and overshooting. While the descent direction is usually determined from the gradient of the loss function, the learning rate determines how big a step is taken in that direction. Too high a learning rate will make the learning jump over minima, but too low a learning rate will either take too long to converge or get stuck in an undesirable local minimum. In order to achieve faster convergence, prevent oscillations and getting stuck in undesirable local minima the learning rate is often varied during training either in accordance to a learning rate schedule or by using an adaptive learning rate. The learning rate and its adjustments may also differ per parameter, in which case it is a diagonal matrix that can be interpreted as an approximation to the inverse of the Hessian matrix in Newton's method. The learning rate is related to the step length determined by inexact line search in quasi-Newton methods and related optimization algorithms. == Learning rate schedule == Initial rate can be left as system default or can be selected using a range of techniques. A learning rate schedule changes the learning rate during learning and is most often changed between epochs/iterations. This is mainly done with two parameters: decay and momentum. There are many different learning rate schedules but the most common are time-based, step-based and exponential. Decay serves to settle the learning in a nice place and avoid oscillations, a situation that may arise when too high a constant learning rate makes the learning jump back and forth over a minimum, and is controlled by a hyperparameter. Momentum is analogous to a ball rolling down a hill; we want the ball to settle at the lowest point of the hill (corresponding to the lowest error). Momentum both speeds up the learning (increasing the learning rate) when the error cost gradient is heading in the same direction for a long time and also avoids local minima by 'rolling over' small bumps. Momentum is controlled by a hyperparameter analogous to a ball's mass which must be chosen manually—too high and the ball will roll over minima which we wish to find, too low and it will not fulfil its purpose. The formula for factoring in the momentum is more complex than for decay but is most often built in with deep learning libraries such as Keras. Time-based learning schedules alter the learning rate depending on the learning rate of the previous time iteration. Factoring in the decay the mathematical formula for the learning rate is: η n + 1 = η 0 1 + d n {\displaystyle \eta _{n+1}={\frac {\eta _{0}}{1+dn}}} where η {\displaystyle \eta } is the learning rate, η 0 {\displaystyle \eta _{0}} is the original learning rate, d {\displaystyle d} is a decay parameter and n {\displaystyle n} is the iteration step. Step-based learning schedules changes the learning rate according to some predefined steps. The decay application formula is here defined as: η n = η 0 d ⌊ 1 + n r ⌋ {\displaystyle \eta _{n}=\eta _{0}d^{\left\lfloor {\frac {1+n}{r}}\right\rfloor }} where η n {\displaystyle \eta _{n}} is the learning rate at iteration n {\displaystyle n} , η 0 {\displaystyle \eta _{0}} is the initial learning rate, d {\displaystyle d} is how much the learning rate should change at each drop (0.5 corresponds to a halving) and r {\displaystyle r} corresponds to the drop rate, or how often the rate should be dropped (10 corresponds to a drop every 10 iterations). The floor function ( ⌊ … ⌋ {\displaystyle \lfloor \dots \rfloor } ) here drops the value of its input to 0 for all values smaller than 1. Exponential learning schedules are similar to step-based, but instead of steps, a decreasing exponential function is used. The mathematical formula for factoring in the decay is: η n = η 0 e − d n {\displaystyle \eta _{n}=\eta _{0}e^{-dn}} where d {\displaystyle d} is a decay parameter. == Adaptive learning rate == The issue with learning rate schedules is that they all depend on hyperparameters that must be manually chosen for each given learning session and may vary greatly depending on the problem at hand or the model used. To combat this, there are many different types of adaptive gradient descent algorithms such as Adagrad, Adadelta, RMSprop, and Adam which are generally built into deep learning libraries such as Keras.

  Read more →
• 

  Moral graph

  In graph theory, a moral graph is used to find the equivalent undirected form of a directed acyclic graph. It is a key step of the junction tree algorithm, used in belief propagation on graphical models. The moralized counterpart of a directed acyclic graph is formed by adding edges between all pairs of non-adjacent nodes that have a common child, and then making all edges in the graph undirected. Equivalently, a moral graph of a directed acyclic graph G is an undirected graph in which each node of the original G is now connected to its Markov blanket. The name stems from the fact that, in a moral graph, two nodes that have a common child are required to be married by sharing an edge. Moralization may also be applied to mixed graphs, called in this context "chain graphs". In a chain graph, a connected component of the undirected subgraph is called a chain. Moralization adds an undirected edge between any two vertices that both have outgoing edges to the same chain, and then forgets the orientation of the directed edges of the graph. == Weakly recursively simplicial == A graph is weakly recursively simplicial if it has a simplicial vertex and the subgraph after removing a simplicial vertex and some edges (possibly none) between its neighbours is weakly recursively simplicial. A graph is moral if and only if it is weakly recursively simplicial. A chordal graph (a.k.a., recursive simplicial) is a special case of weakly recursively simplicial when no edge is removed during the elimination process. Therefore, a chordal graph is also moral. But a moral graph is not necessarily chordal. == Recognising moral graphs == Unlike chordal graphs that can be recognised in polynomial time, Verma & Pearl (1993) proved that deciding whether or not a graph is moral is NP-complete.

  Read more →
• 

  Gaussian adaptation

  Gaussian adaptation (GA), also called normal or natural adaptation (NA) is an evolutionary algorithm designed for the maximization of manufacturing yield due to statistical deviation of component values of signal processing systems. In short, GA is a stochastic adaptive process where a number of samples of an n-dimensional vector x[xT = (x1, x2, ..., xn)] are taken from a multivariate Gaussian distribution, N(m, M), having mean m and moment matrix M. The samples are tested for fail or pass. The first- and second-order moments of the Gaussian restricted to the pass samples are m and M. The outcome of x as a pass sample is determined by a function s(x), 0 < s(x) < q ≤ 1, such that s(x) is the probability that x will be selected as a pass sample. The average probability of finding pass samples (yield) is P ( m ) = ∫ s ( x ) N ( x − m ) d x {\displaystyle P(m)=\int s(x)N(x-m)\,dx} Then the theorem of GA states: For any s(x) and for any value of P < q, there always exist a Gaussian p. d. f. [ probability density function ] that is adapted for maximum dispersion. The necessary conditions for a local optimum are m = m and M proportional to M. The dual problem is also solved: P is maximized while keeping the dispersion constant (Kjellström, 1991). Proofs of the theorem may be found in the papers by Kjellström, 1970, and Kjellström & Taxén, 1981. Since dispersion is defined as the exponential of entropy/disorder/average information it immediately follows that the theorem is valid also for those concepts. Altogether, this means that Gaussian adaptation may carry out a simultaneous maximisation of yield and average information (without any need for the yield or the average information to be defined as criterion functions). The theorem is valid for all regions of acceptability and all Gaussian distributions. It may be used by cyclic repetition of random variation and selection (like the natural evolution). In every cycle a sufficiently large number of Gaussian distributed points are sampled and tested for membership in the region of acceptability. The centre of gravity of the Gaussian, m, is then moved to the centre of gravity of the approved (selected) points, m. Thus, the process converges to a state of equilibrium fulfilling the theorem. A solution is always approximate because the centre of gravity is always determined for a limited number of points. It was used for the first time in 1969 as a pure optimization algorithm making the regions of acceptability smaller and smaller (in analogy to simulated annealing, Kirkpatrick 1983). Since 1970 it has been used for both ordinary optimization and yield maximization. == Natural evolution and Gaussian adaptation == It has also been compared to the natural evolution of populations of living organisms. In this case s(x) is the probability that the individual having an array x of phenotypes will survive by giving offspring to the next generation; a definition of individual fitness given by Hartl 1981. The yield, P, is replaced by the mean fitness determined as a mean over the set of individuals in a large population. Phenotypes are often Gaussian distributed in a large population and a necessary condition for the natural evolution to be able to fulfill the theorem of Gaussian adaptation, with respect to all Gaussian quantitative characters, is that it may push the centre of gravity of the Gaussian to the centre of gravity of the selected individuals. This may be accomplished by the Hardy–Weinberg law. This is possible because the theorem of Gaussian adaptation is valid for any region of acceptability independent of the structure (Kjellström, 1996). In this case the rules of genetic variation such as crossover, inversion, transposition etcetera may be seen as random number generators for the phenotypes. So, in this sense Gaussian adaptation may be seen as a genetic algorithm. == How to climb a mountain == Mean fitness may be calculated provided that the distribution of parameters and the structure of the landscape is known. The real landscape is not known, but figure below shows a fictitious profile (blue) of a landscape along a line (x) in a room spanned by such parameters. The red curve is the mean based on the red bell curve at the bottom of figure. It is obtained by letting the bell curve slide along the x-axis, calculating the mean at every location. As can be seen, small peaks and pits are smoothed out. Thus, if evolution is started at A with a relatively small variance (the red bell curve), then climbing will take place on the red curve. The process may get stuck for millions of years at B or C, as long as the hollows to the right of these points remain, and the mutation rate is too small. If the mutation rate is sufficiently high, the disorder or variance may increase and the parameter(s) may become distributed like the green bell curve. Then the climbing will take place on the green curve, which is even more smoothed out. Because the hollows to the right of B and C have now disappeared, the process may continue up to the peaks at D. But of course the landscape puts a limit on the disorder or variability. Besides — dependent on the landscape — the process may become very jerky, and if the ratio between the time spent by the process at a local peak and the time of transition to the next peak is very high, it may as well look like a punctuated equilibrium as suggested by Gould (see Ridley). == Computer simulation of Gaussian adaptation == Thus far the theory only considers mean values of continuous distributions corresponding to an infinite number of individuals. In reality however, the number of individuals is always limited, which gives rise to an uncertainty in the estimation of m and M (the moment matrix of the Gaussian). And this may also affect the efficiency of the process. Unfortunately very little is known about this, at least theoretically. The implementation of normal adaptation on a computer is a fairly simple task. The adaptation of m may be done by one sample (individual) at a time, for example m(i + 1) = (1 – a) m(i) + ax where x is a pass sample, and a < 1 a suitable constant so that the inverse of a represents the number of individuals in the population. M may in principle be updated after every step y leading to a feasible point x = m + y according to: M(i + 1) = (1 – 2b) M(i) + 2byyT, where yT is the transpose of y and b << 1 is another suitable constant. In order to guarantee a suitable increase of average information, y should be normally distributed with moment matrix μ2M, where the scalar μ > 1 is used to increase average information (information entropy, disorder, diversity) at a suitable rate. But M will never be used in the calculations. Instead we use the matrix W defined by WWT = M. Thus, we have y = Wg, where g is normally distributed with the moment matrix μU, and U is the unit matrix. W and WT may be updated by the formulas W = (1 – b)W + bygT and WT = (1 – b)WT + bgyT because multiplication gives M = (1 – 2b)M + 2byyT, where terms including b2 have been neglected. Thus, M will be indirectly adapted with good approximation. In practice it will suffice to update W only W(i + 1) = (1 – b)W(i) + bygT. This is the formula used in a simple 2-dimensional model of a brain satisfying the Hebbian rule of associative learning; see the next section (Kjellström, 1996 and 1999). The figure below illustrates the effect of increased average information in a Gaussian p.d.f. used to climb a mountain Crest (the two lines represent the contour line). Both the red and green cluster have equal mean fitness, about 65%, but the green cluster has a much higher average information making the green process much more efficient. The effect of this adaptation is not very salient in a 2-dimensional case, but in a high-dimensional case, the efficiency of the search process may be increased by many orders of magnitude. == The evolution in the brain == In the brain the evolution of DNA-messages is supposed to be replaced by an evolution of signal patterns and the phenotypic landscape is replaced by a mental landscape, the complexity of which will hardly be second to the former. The metaphor with the mental landscape is based on the assumption that certain signal patterns give rise to a better well-being or performance. For instance, the control of a group of muscles leads to a better pronunciation of a word or performance of a piece of music. In this simple model it is assumed that the brain consists of interconnected components that may add, multiply and delay signal values. A nerve cell kernel may add signal values, a synapse may multiply with a constant and An axon may delay values. This is a basis of the theory of digital filters and neural networks consisting of components that may add, multiply and delay signalvalues and also of many brain models, Levine 1991. In the figure below the brain stem is supposed to deliver Gaussian distributed signal patterns. This may be possible since certai

  Read more →
• 

  Elastic map

  Elastic maps provide a tool for nonlinear dimensionality reduction. By their construction, they are a system of elastic springs embedded in the data space. This system approximates a low-dimensional manifold. The elastic coefficients of this system allow the switch from completely unstructured k-means clustering (zero elasticity) to the estimators located closely to linear PCA manifolds (for high bending and low stretching modules). With some intermediate values of the elasticity coefficients, this system effectively approximates non-linear principal manifolds. This approach is based on a mechanical analogy between principal manifolds, that are passing through "the middle" of the data distribution, and elastic membranes and plates. The method was developed by A.N. Gorban, A.Y. Zinovyev and A.A. Pitenko in 1996–1998. == Energy of elastic map == Let S {\displaystyle {\mathcal {S}}} be a data set in a finite-dimensional Euclidean space. Elastic map is represented by a set of nodes w j {\displaystyle {\bf {w}}_{j}} in the same space. Each datapoint s ∈ S {\displaystyle s\in {\mathcal {S}}} has a host node, namely the closest node w j {\displaystyle {\bf {w}}_{j}} (if there are several closest nodes then one takes the node with the smallest number). The data set S {\displaystyle {\mathcal {S}}} is divided into classes K j = { s | w j is a host of s } {\displaystyle K_{j}=\{s\ |\ {\bf {w}}_{j}{\mbox{ is a host of }}s\}} . The approximation energy D is the distortion D = 1 2 ∑ j = 1 k ∑ s ∈ K j ‖ s − w j ‖ 2 {\displaystyle D={\frac {1}{2}}\sum _{j=1}^{k}\sum _{s\in K_{j}}\|s-{\bf {w}}_{j}\|^{2}} , which is the energy of the springs with unit elasticity which connect each data point with its host node. It is possible to apply weighting factors to the terms of this sum, for example to reflect the standard deviation of the probability density function of any subset of data points { s i } {\displaystyle \{s_{i}\}} . On the set of nodes an additional structure is defined. Some pairs of nodes, ( w i , w j ) {\displaystyle ({\bf {w}}_{i},{\bf {w}}_{j})} , are connected by elastic edges. Call this set of pairs E {\displaystyle E} . Some triplets of nodes, ( w i , w j , w k ) {\displaystyle ({\bf {w}}_{i},{\bf {w}}_{j},{\bf {w}}_{k})} , form bending ribs. Call this set of triplets G {\displaystyle G} . The stretching energy is U E = 1 2 λ ∑ ( w i , w j ) ∈ E ‖ w i − w j ‖ 2 {\displaystyle U_{E}={\frac {1}{2}}\lambda \sum _{({\bf {w}}_{i},{\bf {w}}_{j})\in E}\|{\bf {w}}_{i}-{\bf {w}}_{j}\|^{2}} , The bending energy is U G = 1 2 μ ∑ ( w i , w j , w k ) ∈ G ‖ w i − 2 w j + w k ‖ 2 {\displaystyle U_{G}={\frac {1}{2}}\mu \sum _{({\bf {w}}_{i},{\bf {w}}_{j},{\bf {w}}_{k})\in G}\|{\bf {w}}_{i}-2{\bf {w}}_{j}+{\bf {w}}_{k}\|^{2}} , where λ {\displaystyle \lambda } and μ {\displaystyle \mu } are the stretching and bending moduli respectively. The stretching energy is sometimes referred to as the membrane, while the bending energy is referred to as the thin plate term. For example, on the 2D rectangular grid the elastic edges are just vertical and horizontal edges (pairs of closest vertices) and the bending ribs are the vertical or horizontal triplets of consecutive (closest) vertices. The total energy of the elastic map is thus U = D + U E + U G . {\displaystyle U=D+U_{E}+U_{G}.} The position of the nodes { w j } {\displaystyle \{{\bf {w}}_{j}\}} is determined by the mechanical equilibrium of the elastic map, i.e. its location is such that it minimizes the total energy U {\displaystyle U} . == Expectation-maximization algorithm == For a given splitting of dataset S {\displaystyle {\mathcal {S}}} in classes K j {\displaystyle K_{j}} , minimization of the quadratic functional U {\displaystyle U} is a linear problem with the sparse matrix of coefficients. Therefore, similar to principal component analysis or k-means, a splitting method is used: For given { w j } {\displaystyle \{{\bf {w}}_{j}\}} find { K j } {\displaystyle \{K_{j}\}} ; For given { K j } {\displaystyle \{K_{j}\}} minimize U {\displaystyle U} and find { w j } {\displaystyle \{{\bf {w}}_{j}\}} ; If no change, terminate. This expectation-maximization algorithm guarantees a local minimum of U {\displaystyle U} . For improving the approximation various additional methods are proposed. For example, the softening strategy is used. This strategy starts with a rigid grids (small length, small bending and large elasticity modules λ {\displaystyle \lambda } and μ {\displaystyle \mu } coefficients) and finishes with soft grids (small λ {\displaystyle \lambda } and μ {\displaystyle \mu } ). The training goes in several epochs, each epoch with its own grid rigidness. Another adaptive strategy is growing net: one starts from a small number of nodes and gradually adds new nodes. Each epoch goes with its own number of nodes. == Applications == Most important applications of the method and free software are in bioinformatics for exploratory data analysis and visualisation of multidimensional data, for data visualisation in economics, social and political sciences, as an auxiliary tool for data mapping in geographic informational systems and for visualisation of data of various nature. The method is applied in quantitative biology for reconstructing the curved surface of a tree leaf from a stack of light microscopy images. This reconstruction is used for quantifying the geodesic distances between trichomes and their patterning, which is a marker of the capability of a plant to resist to pathogenes. Recently, the method is adapted as a support tool in the decision process underlying the selection, optimization, and management of financial portfolios. The method of elastic maps has been systematically tested and compared with several machine learning methods on the applied problem of identification of the flow regime of a gas-liquid flow in a pipe. There are various regimes: Single phase water or air flow, Bubbly flow, Bubbly-slug flow, Slug flow, Slug-churn flow, Churn flow, Churn-annular flow, and Annular flow. The simplest and most common method used to identify the flow regime is visual observation. This approach is, however, subjective and unsuitable for relatively high gas and liquid flow rates. Therefore, the machine learning methods are proposed by many authors. The methods are applied to differential pressure data collected during a calibration process. The method of elastic maps provided a 2D map, where the area of each regime is represented. The comparison with some other machine learning methods is presented in Table 1 for various pipe diameters and pressure. Here, ANN stands for the backpropagation artificial neural networks, SVM stands for the support vector machine, SOM for the self-organizing maps. The hybrid technology was developed for engineering applications. In this technology, elastic maps are used in combination with Principal Component Analysis (PCA), Independent Component Analysis (ICA) and backpropagation ANN. The textbook provides a systematic comparison of elastic maps and self-organizing maps (SOMs) in applications to economic and financial decision-making.

  Read more →
• 

  WinFIG

  WinFIG is a proprietary shareware vector graphics editor application. The file format and rendering are as close to Xfig as possible, but the program takes advantage of Windows features like clipboard, printer preview, multiple documents etc. As of 2011, WinFIG is under active development, with new features being added regularly. == History == The first release was in March 2003 and based on the Amiga program AmiFIG by the same author, which is also an Xfig compatible vector drawing application. WinFIG was not created by porting the Xfig source code to Windows. It is an independent implementation. Starting with release 4.0 WinFIG was ported from MFC to the Qt toolkit as the application framework and thereby enabling the first release of a Linux version. After Version 7.8 the Version scheme changes to years with version 2021.1. == Interface and usability == WinFIG is designed to provide a clear, efficient and convenient graphical user interface. It allows working on multiple documents using an MDI user interface and provides unlimited undo and redo of actions. == Features == === Object creation === The basic types of objects in WinFIG are: Open and closed Splines Ellipses Polylines and Polygons Texts LaTeX formatted texts Arcs Images: PNG, GIF, JPEG, EPS and more Compound objects, which are hierarchical compositions of objects Objects can have several attributes, which depend on the object type: Line width Line style Line cap style Line join style Arrows Outline color, fill color and fill pattern === Object manipulation === move copy scale rotate align add/delete points from lines or splines copy object attributes Numerical input of point coordinates === Exports === WinFIG can export into various formats: Raster formats: GIF, JPEG, PNG, PPM, XBM, XPM, PCX, TIFF, SLD Formats for printed documents: PostScript, PDF, LaTeX, HP-GL (printer control language used by Hewlett-Packard plotters), Vector graphics formats: EPS, SVG, PSTricks, TPIC, PIC, CGM, Metafont, MetaPost, EMF, Tk. === Miscellaneous === Winfig can handle smart links. A smart link is a moving connection from a source to a target object. It is established by connecting the end point of a line or spline to another object. The connecting line or spline segment follows the movements of the target object. Smart links are useful for diagrams, graphs etc. WinFIG can show a grid and provides several magnet modes for constraining editing operations to discrete coordinates. Objects can be organized in layers to control their Z-order. This is important to control overlapping of filled shapes. Object library: drawings can be stored in a special sub-folder in the program installation directory, which makes them available in the library dialog for easy reuse.

  Read more →
• 

  Stress majorization

  Stress majorization is an optimization strategy used in multidimensional scaling (MDS) where, for a set of n {\displaystyle n} m {\displaystyle m} -dimensional data items, a configuration X {\displaystyle X} of n {\displaystyle n} points in r {\displaystyle r} ( ≪ m ) {\displaystyle (\ll m)} -dimensional space is sought that minimizes the so-called stress function σ ( X ) {\displaystyle \sigma (X)} . Usually r {\displaystyle r} is 2 {\displaystyle 2} or 3 {\displaystyle 3} , i.e. the ( n × r ) {\displaystyle (n\times r)} matrix X {\displaystyle X} lists points in 2 − {\displaystyle 2-} or 3 − {\displaystyle 3-} dimensional Euclidean space so that the result may be visualised (i.e. an MDS plot). The function σ {\displaystyle \sigma } is a cost or loss function that measures the squared differences between ideal ( m {\displaystyle m} -dimensional) distances and actual distances in r-dimensional space. It is defined as: σ ( X ) = ∑ i < j ≤ n w i j ( d i j ( X ) − δ i j ) 2 {\displaystyle \sigma (X)=\sum _{i Read more →

• 

  Taguchi loss function

  The Taguchi loss function is graphical depiction of loss developed by the Japanese business statistician Genichi Taguchi to describe a phenomenon affecting the value of products produced by a company. Praised by Dr. W. Edwards Deming (the business guru of the 1980s American quality movement), it made clear the concept that quality does not suddenly plummet when, for instance, a machinist exceeds a rigid blueprint tolerance. Instead 'loss' in value progressively increases as variation increases from the intended condition. This was considered a breakthrough in describing quality, and helped fuel the continuous improvement movement. The concept of Taguchi's quality loss function was in contrast with the American concept of quality, popularly known as goal post philosophy, the concept given by American quality guru Phil Crosby. Goal post philosophy emphasizes that if a product feature doesn't meet the designed specifications it is termed as a product of poor quality (rejected), irrespective of amount of deviation from the target value (mean value of tolerance zone). This concept has similarity with the concept of scoring a 'goal' in the game of football or hockey, because a goal is counted 'one' irrespective of the location of strike of the ball in the 'goal post', whether it is in the center or towards the corner. This means that if the product dimension goes out of the tolerance limit the quality of the product drops suddenly. Through his concept of the quality loss function, Taguchi explained that from the customer's point of view this drop of quality is not sudden. The customer experiences a loss of quality the moment product specification deviates from the 'target value'. This 'loss' is depicted by a quality loss function and it follows a parabolic curve mathematically given by L = k(y–m)2, where m is the theoretical 'target value' or 'mean value' and y is the actual size of the product, k is a constant and L is the loss. This means that if the difference between 'actual size' and 'target value' i.e. (y–m) is large, loss would be more, irrespective of tolerance specifications. In Taguchi's view tolerance specifications are given by engineers and not by customers; what the customer experiences is 'loss'. This equation is true for a single product; if 'loss' is to be calculated for multiple products the loss function is given by L = k[S2 + ( y ¯ {\displaystyle {\bar {y}}} – m)2], where S2 is the 'variance of product size' and y ¯ {\displaystyle {\bar {y}}} is the average product size. == Overview == The Taguchi loss function is important for a number of reasons—primarily, to help engineers better understand the importance of designing for variation.

  Read more →
• 

  World Programming System

  The World Programming System, also known as WPS Analytics or WPS, is a software product developed by a company called World Programming (acquired by Altair Engineering). WPS Analytics supports users of mixed ability to access and process data and to perform data science tasks. It has interactive visual programming tools using data workflows, and it has coding tools supporting the use of the SAS language mixed with Python, R and SQL. == About == WPS can use programs written in the language of SAS without the need for translating them into any other language. In this regard WPS is compatible with the SAS system. WPS has a built-in language interpreter able to process the language of SAS and produce similar results. WPS is available to run on z/OS, Windows, macOS, Linux (x86, Armv8 64-bit, IBM Power LE, IBM Z), and AIX. On all supported platforms, programs written in the language of SAS can be executed from a WPS command line interface, often referred to as running in batch mode. WPS can also be used from a graphical user interface known as the WPS Workbench for managing, editing and running programs written in the language of SAS. The WPS Workbench user interface is based on Eclipse. WPS version 4 (released in March 2018) introduced a drag-and-drop workflow canvas providing interactive blocks for data retrieval, blending and preparation, data discovery and profiling, predictive modelling powered by machine learning algorithms, model performance validation and scorecards. WPS version 3 (released in February 2012) provided a new client/server architecture that allows the WPS Workbench GUI to execute SAS programs on remote server installations of WPS in a network or cloud. The resulting output, data sets, logs, etc., can then all be viewed and manipulated from inside the Workbench as if the workloads had been executed locally. SAS programs do not require any special language statements to use this feature. == Summary of main features == Runs on Windows, macOS, z/OS, Linux (x86, Armv8 64-bit, IBM Power LE, IBM Z), and AIX An integrated development environment based on Eclipse for Linux, macOS and Windows. Support for language of SAS elements. Support for the language of SAS Macros. Matrix Programming support using PROC IML. Support for generating band plots, bar charts, box plots, bubble plots, contour plots, dendrogram plots, ellipse plots, fringe plots, heat maps, high-low plots, histograms, loess plots, needle plots, pie charts, penalised b-spline, radar charts, reference lines, scatter plots, series plots, step plots, regression plots and vector plots. Support for statistical procedures ACECLUS, ASSOCRULES, ANOVA, BIN, BOXPLOT, CANCORR, CANDISC, CLUSTER, CORRESP, DISCRIM, DISTANCE, FACTOR, FASTCLUS, FREQ, GAM, GANNO, GENMOD, GLIMMIX, GLM, GLMMOD, GLMSELECT, ICLIFETEST, KDE, LIFEREG, LIFETEST, LOESS, LOGISTIC, MDS, MEANS, MI, MIANALYSE, MIXED, MODECLUS, NESTED, NLIN, NPAR1WAY, PHREG, PLAN, PLS, POWER, PRINCOMP, PROBIT, QUANTREG, RBF, REG, ROBUSTREG, RSREG, SCORE, SEGMENT, SIMNORMAL, STANDARD, STDSIZE, STDRATE, STEPDISC, SUMMARY, SURVEYMEANS, SURVEYSELECT, TPSPLINE, TRANSREG, TREE, TTEST, UNIVARIATE, VARCLUS, VARCOMP Support for time series procedures ARIMA, AUTOREG, ESM, EXPAND, FORECAST, LOAN, SEVERITY, SPECTRA, TIMESERIES, X12 Support for machine learning procedures DECISIONFOREST, DECISIONTREE, GMM, MLP, OPTIMALBIN, SEGMENT, SVM Support for ODS. Reads and writes SAS datasets (compressed or uncompressed). Access: Actian Matrix (previously known as ParAccel), DASD, DB2, Excel, Greenplum, Hadoop, Informix, Kognitio Archived 2012-08-24 at the Wayback Machine, MariaDB, MySQL, Netezza, ODBC, OLEDB, Oracle, PostgreSQL, SAND, Snowflake, SPSS/PSPP, SQL Server, Sybase, Sybase IQ, Teradata, VSAM, Vertica and XML. Support for SAS Tape Format. Direct output of reports to CSV, PDF and HTML. Support to connect WPS systems programmatically, remote submit parts of a program to execute on connected remote servers, upload and download data between the connected systems. Support for Hadoop Support for R Support for Python == Industry recognition == Gartner recognized World Programming in their Cool Vendors in Data Science, 2014 Report. == Lawsuit == In 2010 World Programming defended its use of the language of SAS in the High Court of England and Wales in SAS Institute Inc. v World Programming Ltd. The software was the subject of a lawsuit by SAS Institute. The EU Court of Justice ruled in favor of World Programming, stating that the copyright protection does not extend to the software functionality, the programming language used and the format of the data files used by the program. It stated that there is no copyright infringement when a company which does not have access to the source code of a program studies, observes and tests that program to create another program with the same functionality.

  Read more →
• 

  United States Tech Force

  The U.S. Tech Force (also styled as US Tech Force, Tech Force, or Government Tech Force) is a federal hiring initiative launched by the second Donald Trump administration in December 2025. The program, administered by the Office of Personnel Management (OPM), aims to recruit about 1,000 early-career technology professionals into two-year government jobs to modernize federal IT systems, advance artificial intelligence (AI) capabilities, and address technological gaps in government operations. The initiative is an effort to plug capability gaps created by Trump-administration efforts to shrink the federal government, which led to the departure of some 220,000 federal employees, including many in IT. The initiative seeks early-career workers; officials said it would offer competitive salaries and opportunities to work on high-impact government technology projects. Major technology companies—including Amazon, Apple, Microsoft, Nvidia, Meta, Google, and OpenAI—agreed to help identify and refer candidates. Candidates are allowed to take Tech Force positions on leaves of absence and without divesting their stock, raising conflict-of-interest questions. In January 2026, OPM direction Scott Kupor said the deadline for applying to Tech Force was being extended because of "tremendous interest" without saying how many people had actually applied. Also in December 2025, news broke that the administration is planning another novel use of private-sector workers: hiring cybersecurity firms for offensive cyber operations.

  Read more →
• 

  Sample exclusion dimension

  In computational learning theory, sample exclusion dimensions arise in the study of exact concept learning with queries. In algorithmic learning theory, a concept over a domain X is a Boolean function over X. Here we only consider finite domains. A partial approximation S of a concept c is a Boolean function over Y ⊆ X {\displaystyle Y\subseteq X} such that c is an extension to S. Let C be a class of concepts and c be a concept (not necessarily in C). Then a specifying set for c w.r.t. C, denoted by S is a partial approximation S of c such that C contains at most one extension to S. If we have observed a specifying set for some concept w.r.t. C, then we have enough information to verify a concept in C with at most one more mind change. The exclusion dimension, denoted by XD(C), of a concept class is the maximum of the size of the minimum specifying set of c' with respect to C, where c' is a concept not in C.

  Read more →
• 

  Implicit blockmodeling

  Implicit blockmodeling is an approach in blockmodeling, similar to a valued and homogeneity blockmodeling, where initially an additional normalization is used and then while specifying the parameter of the relevant link is replaced by the block maximum. This approach was first proposed by Batagelj and Ferligoj in 2000, and developed by Aleš Žiberna in 2007/08. Comparing with homogeneity, the implicit blockmodeling will perform similarly with max-regular equivalence, but slightly worse in other settings. It will perform worse than valued and homogeneity blockmodeling with a pre-specified blockmodel.

  Read more →