AI Grammar Sentence Checker

AI Grammar Sentence Checker — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  VueScan

  VueScan is a computer program for image scanning, especially of photographs, including negatives. It supports optical character recognition (OCR) of text documents. The software can be downloaded and used free of charge, but adds a watermark on scans until a license is purchased. == Purpose == VueScan is intended to work with a large number of image scanners, excluding specialised professional scanners such as drum scanners, on many computer operating systems (OS), even if drivers for the scanner are not available for the OS. These scanners are supplied with device drivers and software to operate them, included in their price. A 2014 review considered that the reasons to purchase VueScan are to allow older scanners not supported by drivers for newer operating systems to be used in more up-to-date systems and for better scanning and processing of photographs (prints; also slides and negatives when supported by scanners) than is afforded by manufacturers' software. The review did not report any advantages to VueScan's processing of documents over other software. The reviewer considered VueScan comparable to SilverFast, a similar program, with support for some specific scanners better in one or the other. Vuescan supports more scanners, with a single purchase giving access to the full range of both film and flatbed scanners, and costs less. The VueScan program can be used with its own drivers or with drivers supplied by the scanner manufacturer, if supported by the operating system. VueScan drivers can also be used without the VueScan program by application software that supports scanning directly, such as Adobe Photoshop, again enabling the use of scanners without current manufacturers' drivers. In 2019 when Apple released macOS Catalina, they removed support for running 32-bit programs, including 32-bit drivers for scanning equipment. In response, Hamrick released VueScan 9.7, effectively saving thousands of scanners from being rendered obsolete. == Overview == VueScan enables the user to modify and fine-tune the scanning parameters. The program uses its own independent method to interface with scanner hardware, and can support many older scanners under computer operating systems for which drivers are not available, allowing old scanners to be used with newer platforms that do not otherwise support them. VueScan supports an increasing number of scanners and digital cameras; 2,400 on Windows, 2,100 on Mac OS X and 1,900 on Linux in 2018. VueScan is supplied as one downloadable file for each operating system, which supports the full range of scanners. Without the purchase of a license, the program runs in fully functional demonstration mode, identical to Professional mode, except that watermarks are superimposed on saved and printed images. Purchase of a license removes the watermark. A standard license allows updates for one year; a professional license allows unlimited updates and provides some additional features. VueScan supports optical character recognition (OCR), with English included, and 32 additional language packages available on its website. In September 2011, VueScan co-developer Ed Hamrick said that he was selling US$3 million per year of VueScan licenses.

  Read more →
• 

  Code (cryptography)

  In cryptology, a code is a method used to encrypt a message that operates at the level of meaning; that is, words or phrases are converted into something else. A code might transform "change" into "CVGDK" or "cocktail lounge". The U.S. National Security Agency defined a code as "A substitution cryptosystem in which the plaintext elements are primarily words, phrases, or sentences, and the code equivalents (called "code groups") typically consist of letters or digits (or both) in otherwise meaningless combinations of identical length." A codebook is needed to encrypt, and decrypt the phrases or words. By contrast, ciphers encrypt messages at the level of individual letters, or small groups of letters, or even, in modern ciphers, individual bits. Messages can be transformed first by a code, and then by a cipher. Such multiple encryption, or "superencryption" aims to make cryptanalysis more difficult. Another comparison between codes and ciphers is that a code typically represents a letter or groups of letters directly without the use of mathematics. As such the numbers are configured to represent these three values: 1001 = A, 1002 = B, 1003 = C, ... . The resulting message, then would be 1001 1002 1003 to communicate ABC. Ciphers, however, utilize a mathematical formula to represent letters or groups of letters. For example, A = 1, B = 2, C = 3, ... . Thus the message ABC results by multiplying each letter's value by 13. The message ABC, then would be 13 26 39. Codes have a variety of drawbacks, including susceptibility to cryptanalysis and the difficulty of managing the cumbersome codebooks, so ciphers are now the dominant technique in modern cryptography. In contrast, because codes are representational, they are not susceptible to mathematical analysis of the individual codebook elements. In the example, the message 13 26 39 can be cracked by dividing each number by 13 and then ranking them alphabetically. However, the focus of codebook cryptanalysis is the comparative frequency of the individual code elements matching the same frequency of letters within the plaintext messages using frequency analysis. In the above example, the code group, 1001, 1002, 1003, might occur more than once and that frequency might match the number of times that ABC occurs in plain text messages. (In the past, or in non-technical contexts, code and cipher are often used to refer to any form of encryption). == One- and two-part codes == Codes are defined by "codebooks" (physical or notional), which are dictionaries of codegroups listed with their corresponding plaintext. Codes originally had the codegroups assigned in 'plaintext order' for convenience of the code designed, or the encoder. For example, in a code using numeric code groups, a plaintext word starting with "a" would have a low-value group, while one starting with "z" would have a high-value group. The same codebook could be used to "encode" a plaintext message into a coded message or "codetext", and "decode" a codetext back into plaintext message. In order to make life more difficult for codebreakers, codemakers designed codes with no predictable relationship between the codegroups and the ordering of the matching plaintext. In practice, this meant that two codebooks were now required, one to find codegroups for encoding, the other to look up codegroups to find plaintext for decoding. Such "two-part" codes required more effort to develop, and twice as much effort to distribute (and discard safely when replaced), but they were harder to break. The Zimmermann Telegram in January 1917 used the German diplomatic "0075" two-part code system which contained upwards of 10,000 phrases and individual words. == One-time code == A one-time code is a prearranged word, phrase or symbol that is intended to be used only once to convey a simple message, often the signal to execute or abort some plan or confirm that it has succeeded or failed. One-time codes are often designed to be included in what would appear to be an innocent conversation. Done properly they are almost impossible to detect, though a trained analyst monitoring the communications of someone who has already aroused suspicion might be able to recognize a comment like "Aunt Bertha has gone into labor" as having an ominous meaning. Famous example of one time codes include: In the Bible, Jonathan prearranges a code with David, who is going into hiding from Jonathan's father, King Saul. If, during archery practice, Jonathan tells the servant retrieving arrows "the arrows are on this side of you," David may safely return to court; if the command is "the arrows are beyond you," David must flee. "One if by land; two if by sea" in "Paul Revere's Ride" made famous in the poem by Henry Wadsworth Longfellow "Climb Mount Niitaka" - the signal to Japanese planes to begin the attack on Pearl Harbor During World War II the British Broadcasting Corporation's overseas service frequently included "personal messages" as part of its regular broadcast schedule. The seemingly nonsensical stream of messages read out by announcers were actually one time codes intended for Special Operations Executive (SOE) agents operating behind enemy lines. An example might be "The princess wears red shoes" or "Mimi's cat is asleep under the table". Each code message was read out twice. By such means, the French Resistance were instructed to start sabotaging rail and other transport links the night before D-day. "Over all of Spain, the sky is clear" was a signal (broadcast on radio) to start the nationalist military revolt in Spain on July 17, 1936. Sometimes messages are not prearranged and rely on shared knowledge hopefully known only to the recipients. An example is the telegram sent to U.S. President Harry Truman, then at the Potsdam Conference to meet with Soviet premier Joseph Stalin, informing Truman of the first successful test of an atomic bomb. "Operated on this morning. Diagnosis not yet complete but results seem satisfactory and already exceed expectations. Local press release necessary as interest extends great distance. Dr. Groves pleased. He returns tomorrow. I will keep you posted." == Idiot code == An idiot code is a code that is created by the parties using it. This type of communication is akin to the hand signals used by armies in the field. Example: Any sentence where 'day' and 'night' are used means 'attack'. The location mentioned in the following sentence specifies the location to be attacked. Plaintext: Attack X. Codetext: We walked day and night through the streets but couldn't find it! Tomorrow we'll head into X. An early use of the term appears to be by George Perrault, a character in the science fiction book Friday by Robert A. Heinlein: The simplest sort [of code] and thereby impossible to break. The first ad told the person or persons concerned to carry out number seven or expect number seven or it said something about something designated as seven. This one says the same with respect to code item number ten. But the meaning of the numbers cannot be deduced through statistical analysis because the code can be changed long before a useful statistical universe can be reached. It's an idiot code... and an idiot code can never be broken if the user has the good sense not to go too often to the well. Terrorism expert Magnus Ranstorp said that the men who carried out the September 11 attacks on the United States used basic e-mail and what he calls "idiot code" to discuss their plans. == Cryptanalysis of codes == While solving a monoalphabetic substitution cipher is easy, solving even a simple code is difficult. Decrypting a coded message is a little like trying to translate a document written in a foreign language, with the task basically amounting to building up a "dictionary" of the codegroups and the plaintext words they represent. One fingerhold on a simple code is the fact that some words are more common than others, such as "the" or "a" in English. In telegraphic messages, the codegroup for "STOP" (i.e., end of sentence or paragraph) is usually very common. This helps define the structure of the message in terms of sentences, if not their meaning, and this is cryptanalytically useful. Further progress can be made against a code by collecting many codetexts encrypted with the same code and then using information from other sources spies newspapers diplomatic cocktail party chat the location from where a message was sent where it was being sent to (i.e., traffic analysis) the time the message was sent, events occurring before and after the message was sent the normal habits of the people sending the coded messages etc. For example, a particular codegroup found almost exclusively in messages from a particular army and nowhere else might very well indicate the commander of that army. A codegroup that appears in messages preceding an attack on a particular location may very well stand for that location. Cribs can be an immediate giveaway to the definiti

  Read more →
• 

  Data steward

  A data steward is an oversight or data governance role within an organization, and is responsible for ensuring the quality and fitness for purpose of the organization's data assets, including the metadata for those data assets. A data steward may share some responsibilities with a data custodian, such as the awareness, accessibility, release, appropriate use, security and management of data. A data steward would also participate in the development and implementation of data assets. A data steward may seek to improve the quality and fitness for purpose of other data assets their organization depends upon but is not responsible for. Data stewards have a specialist role that utilizes an organization's data governance processes, policies, guidelines and responsibilities for administering an organizations' entire data in compliance with policy and/or regulatory obligations (e.g., GDPR, HIPAA). The overall objective of a data steward is the data quality of the data assets, datasets, data records and data elements. This includes documenting metainformation for the data, such as definitions, related rules/governance, physical manifestation, and related data models (most of these properties being specific to an attribute/concept relationship), identifying owners/custodian's various responsibilities, relations insight pertaining to attribute quality, aiding with project requirement data facilitation and documentation of capture rules. Data stewards begin the stewarding process with the identification of the data assets and elements which they will steward, with the ultimate result being standards, controls and data entry. The steward works closely with business glossary standards analysts (for standards), with data architect/modelers (for standards), with DQ analysts (for controls) and with operations team members (good-quality data going in per business rules) while entering data. Data stewardship roles are common when organizations attempt to exchange data precisely and consistently between computer systems and to reuse data-related resources. Master data management often makes references to the need for data stewardship for its implementation to succeed. Data stewardship must have precise purpose, fit for purpose or fitness. == Data steward responsibilities == A data steward ensures that each assigned data element: Has clear and unambiguous data element definition Does not conflict with other data elements in the metadata registry (removes duplicates, overlap etc.) Has clear enumerated value definitions if it is of type Code Is still being used (remove unused data elements) Is being used consistently in various computer systems Is being used, fit for purpose = Data Fitness Has adequate documentation on appropriate usage and notes Documents the origin and sources of authority on each metadata element Is protected against unauthorised access or change Responsibilities of data stewards vary between different organisations and institutions. For example, at Delft University of Technology, data stewards are perceived as the first contact point for any questions related to research data. They also have subject-specific background allowing them to easily connect with researchers and to contextualise data management problems to take into account disciplinary practices. == Types of data stewards == Depending on the set of data stewardship responsibilities assigned to an individual, there are 4 types (or dimensions of responsibility) of data stewards typically found within an organization: Data object data steward - responsible for managing reference data and attributes of one business data entity Business data steward - responsible for managing critical data, both reference and transactional, created or used by one business function. The data steward may also serve as a liaison between the organization's data users and technical teams, helping to bridge the gap between business needs and technical requirements. They may also play a role in educating others within the organization about best practices for data management, and advocating for data-driven decision-making. Process data steward - responsible for managing data across one business process System data steward - responsible for managing data for at least one IT system == Benefits of data stewardship == Systematic data stewardship can foster: Faster analysis Consistent use of data management resources Easy mapping of data between computer systems and exchange documents Lower costs associated with migration to (for example) service-oriented architecture (SOA) Mitigation of data risk Better control of dangers associated with privacy, legal, errors, etc. Assignment of each data element to a person sometimes seems like an unimportant process. But multiple groups have found that users have greater trust and usage rates in systems where they can contact a person with questions on each data element. == Examples == Delft University of Technology (TU Delft) offers an example of data stewardship implementation at a research institution. In 2017 the Data Stewardship Project was initiated at TU Delft to address research data management needs in a disciplinary manner across the whole campus. Dedicated data stewards with subject-specific background were appointed at every TU Delft faculty to support researchers with data management questions and to act as a linking point with the other institutional support services. The project is coordinated centrally by TU Delft Library, and it has its own website, blog and a YouTube channel. The [1]EPA metadata registry furnishes an example of data stewardship. Note that each data element therein has a "POC" (point of contact). In 2023, ETH Zurich launched the Data Stewardship Network (DSN) to facilitate collaboration among employees engaged in data management, analysis, and code development across research groups. The DSN serves as a platform for networking and knowledge exchange, aiming to professionalize the role of data stewards who support research data management and reproducible workflows. Established by the team for Research Data Management and Digital Curation at the ETH Library, the DSN collaborates with Scientific IT Services to provide expertise in areas such as storage infrastructure and reproducible workflows. == Data stewardship applications == Information stewardship applications are business solutions used by business users acting in the role of information steward (interpreting and enforcing information governance policy, for example). These developing solutions represent, for the most part, an amalgam of a number of disparate, previously IT-centric tools already on the market, but are organized and presented in such a way that information stewards (a business role) can support the work of information policy enforcement as part of their normal, business-centric, day-to-day work in a range of use cases. The initial push for the formation of this new category of packaged software came from operational use cases — that is, use of business data in and between transactional and operational business applications. This is where most of the master data management efforts are undertaken in organizations. However, there is also now a faster-growing interest in the new data lake arena for more analytical use cases.

  Read more →
• 

  Control break

  In computer programming, a control break is a change in the value of one of the keys on which a file is sorted, which requires some extra processing. For example, with an input file sorted by post code, the number of items found in each postal district might need to be printed on a report, and a heading shown for the next district. Quite often there is a hierarchy of nested control breaks in a program, such as streets within districts within areas, with the need for a grand total at the end. Structured programming techniques have been developed to ensure correct processing of control breaks in languages such as COBOL and to ensure that conditions such as empty input files and sequence errors are handled properly. With fourth-generation languages such as SQL, the programming language should handle most of the details of control breaks automatically.

  Read more →
• 

  Camfecting

  In computer security, camfecting is the process of attempting to hack into a person's webcam and activate it without the webcam owner's permission. The remotely activated webcam can be used to watch anything within the webcam's field of vision, sometimes including the webcam owner themselves. Camfecting is most often carried out by infecting the victim's computer with a virus that can provide the hacker access to their webcam. This attack is specifically targeted at the victim's webcam, and hence the name camfecting, a portmanteau of the words camera and infecting. Typically, a webcam hacker or a camfecter sends his victim an innocent-looking application which has a hidden Trojan software through which the camfecter can control the victim's webcam. The camfecter virus installs itself silently when the victim runs the original application. Once installed, the camfecter can turn on the webcam and capture pictures/videos. The camfecter software works just like the original webcam software present in the victim computer, the only difference being that the camfecter controls the software instead of the webcam's owner. == Notable cases == Marcus Thomas, former assistant director of the FBI's Operational Technology Division in Quantico, said in a 2013 story in The Washington Post that the FBI had been able to covertly activate a computer's camera—without triggering the light that lets users know it is recording—for several years. In November 2013, American teenager Jared James Abrahams pleaded guilty to hacking over 100-150 women and installing the highly invasive malware Blackshades on their computers in order to obtain nude images and videos of them. One of his victims was Miss Teen USA 2013 Cassidy Wolf. Researchers from Johns Hopkins University have shown how to covertly capture images from the iSight camera on MacBook and iMac models released before 2008, by reprogramming the microcontroller's firmware. == Prevention == A computer that does not have an up-to-date webcam software or any anti-virus (or firewall) software installed and operational may be at increased risk for camfecting from different types of malware. Softcams may nominally increase this risk, if not maintained or configured properly. Although a person cannot protect themselves from zero-day exploits that could potentially activate a camera unknowingly, such as Pegasus is able to do on smartphones. The only way to truly avoid being watched through your own camera is by blocking it physically, since software blocks can be overriden by advanced persistent threats. A simple piece of tape is more commonly used to offuscate the feed of the camera. With even Mark Zuckerberg doing so on his personal laptop that appeared during a presentation. And it being the way Snowden, an ex-contractor for the NSA, is portrayed to do so to prevent camfecting in the biopic Snowden. There is now a market for the manufacture and sale of sliding lens covers that allow users to physically block their computer's camera and, in some cases, microphone. A number of phone and laptop manufacturers tried to implement pop-up cameras that can only be opened manually by the user. But the trend did not become mainstream because of the engineering it took to keep the mechanisms up to date, aswell as the fragility and durability of the cameras.

  Read more →
• 

  Brooklyn Bridge (software)

  The Brooklyn Bridge from White Crane Systems was a data transfer enabler. Although it came with some hardware, it was the software which was the basis of the product. It also could transform the data's format. == Overview == The New York Times described its category as being among "communications packages used to transfer files." In an era of 300 baud, Brooklyn Bridge operated at "115,200 baud" so that a transfer which "at 300 baud took 4 minutes and 36 seconds" only needed 5 seconds. Unlike some communications packages, this one retains the original version-date, so as not to alarm people when they seem to have what looks like an update, when it's not. == Description == Once the software is installed, users comfortable with typing the word "COPY" can do so as readily as they sneakernet. An earlier review described it as "less cumbersome than conventional communications software" The use of neither specialized hardware nor specialized software is ideal in an era when this can be done using online or other "outside" services.

  Read more →
• 

  Dashboard (computing)

  In computer information systems, a dashboard is a type of graphical user interface which often provides at-a-glance views of data relevant to a particular objective or process through a combination of visualizations and summary information. In other usage, "dashboard" is another name for "progress report" or "report" and is considered a form of data visualization. The dashboard is often accessible by a web browser and is typically linked to regularly updating data sources. Dashboards are often interactive and facilitate users to explore the data themselves, usually by clicking into elements to view more detailed information. The term dashboard originates from the automobile dashboard where drivers monitor the major functions at a glance via the instrument panel. == History == The idea of digital dashboards followed the study of decision support systems in the 1970s. Early predecessors of the modern business dashboard were first developed in the 1980s in the form of Executive Information Systems (EISs). Due to problems primarily with data refreshing and handling, it was soon realized that the approach wasn't practical as information was often incomplete, unreliable, and spread across too many disparate sources. Thus, EISs hibernated until the 1990s when the information age quickened pace and data warehousing, and online analytical processing (OLAP) allowed dashboards to function adequately. Despite the availability of enabling technologies, the dashboard use didn't become popular until later in that decade, with the rise of key performance indicators (KPIs), and the introduction of Robert S. Kaplan and David P. Norton's balanced scorecard. In the late 1990s, Microsoft promoted a concept known as the Digital Nervous System and "digital dashboards" were described as being one leg of that concept. Today, the use of dashboards forms an important part of Business Performance Management (BPM). Initially dashboards were used for monitoring purposes, now with the advancement of technology, dashboards are being used for more analytical purposes. The use of dashboards has now been incorporating; scenario analysis, drill down capabilities, and presentation format flexibility. == Benefits == Digital dashboards allow managers to monitor the contribution of the various departments in their organization. In addition, they enable “rolling up” of information to present a consolidated view across an organization. To gauge exactly how well an organization is performing overall, digital dashboards allow you to capture and report specific data points from each department within the organization, thus providing a "snapshot" of performance. Benefits of using digital dashboards include: Visual presentation of performance measures Ability to identify and correct negative trends Measure efficiencies/inefficiencies Ability to generate detailed reports showing new trends Ability to make more informed decisions based on collected business intelligence Dashboards offers a holistic view of the entire business as it gives the manager a bird's eye view into the performance of sales, data inventory, web traffic, social media analytics and other associated data that is visually presented on a single dashboard. Dashboards lead to better management of marketing/financial strategies as a dashboard for the display of marketing data makes the process of marketing easier and more reliable as compared to doing it manually. Web analytics play a crucial role in shaping the marketing strategy of many businesses. Dashboards also facilitate for better tracking of sales and financial reporting as the data is more precise and in one area. Lastly, dashboards offer for better customer service through monitoring because they keep both the managers and the clients updated on the project progress through automated emails and notifications. == Align strategies and organizational goals == Gain total visibility of all systems instantly Quick identification of data outliers and correlations Consolidated reporting into one location Available on mobile devices to quickly access metrics == Classification == Dashboards can be broken down according to role and are either strategic, analytical, operational, or informational. Dashboards are the 3rd step on the information ladder, demonstrating the conversion of data to increasingly valuable insights. Strategic dashboards support managers at any level in an organization and provide the quick overview that decision-makers need to monitor the health and opportunities of the business. Dashboards of this type focus on high-level measures of performance and forecasts. Strategic dashboards benefit from static snapshots of data (daily, weekly, monthly, and quarterly) that are not constantly changing from one moment to the next. Dashboards for analytical purposes often include more context, comparisons, and history, along with subtler performance evaluators. In addition, analytical dashboards typically support interactions with the data, such as drilling down into the underlying details. Dashboards for monitoring operations are often designed differently from those that support strategic decision making or data analysis and often require monitoring of activities and events that are constantly changing and might require attention and response at a moment's notice. == Types of dashboards == Digital dashboards may be laid out to track the flows inherent in the business processes that they monitor. Graphically, users may see the high-level processes and then drill down into low-level data. This level of detail is often buried deep within the corporate enterprise and otherwise unavailable to the senior executives. Three main types of digital dashboards dominate the market today: desktop software applications, web-browser-based applications, and desktop applications are also known as desktop widgets. The last are driven by a widget engine. Both Desktop and Browser-based providers enable the distribution of dashboards via a web browser. An example of the latter is web-based-browser Asana, which helps teams orchestrate their work, from daily tasks to strategic cross-functional initiatives. With it, teams can manage everything from company objectives to digital transformation to product launches and marketing campaigns. Specialized dashboards may track all corporate functions. Examples include human resources, recruiting, sales, operations, security, information technology, project management, customer relationship management, digital marketing and many more departmental dashboards. For a smaller organization like a startup a compact startup scorecard dashboard tracks important activities across lot of domains ranging from social media to sales. Digital dashboard projects involve business units as the driver and the information technology department as the enabler. Therefore, the success of dashboard projects depends on the relevancy/importance of information provided within the dashboard. This includes the metrics chosen to monitor and the timeliness of the data forming those metrics; data must be up to date and accurate. Key performance indicators, balanced scorecards, and sales performance figures are some of the content appropriate on business dashboards. === Performance Dashboards === Dashboards involve the combination of visual and functional features. This combination of features helps improve cognition and interpretation. A performance dashboard sits at the intersection of two powerful disciplines: business intelligence and performance management. Therefore, there are different users who could use these dashboards for different reasons. For example, a level of workers could look at monitoring inventory while those in more managerial roles can look at lagging measure. Then executives could utilize the dashboard to evaluate strategic performance against objectives. == Dashboards and scorecards == Balanced scorecards and dashboards have been linked together as if they were interchangeable. However, although both visually display critical information, the difference is in the format: Scorecards can open the quality of an operation while dashboards provide calculated direction. A balanced scorecard has what they called a "prescriptive" format. It should always contain these components: Perspectives – group Objectives – verb-noun phrases pulled from a strategy plan Measures – also called metric or key performance indicators (KPIs) Spotlight indicators – red, yellow, or green symbols that provide an at-a-glance view of a measure's performance. Each of these sections ensures that a Balanced Scorecard is essentially connected to the businesses critical strategic needs. The design of a dashboard is more loosely defined. Dashboards are usually a series of graphics, charts, gauges and other visual indicators that can be monitored and interpreted. Even when there is a strategic link, on a dashboard, it may not be noticed as such since objectives are not normally pre

  Read more →
• 

  List of cryptography journals

  List of cryptography journals includes notable peer-reviewed academic journals that focus on cryptography, cryptanalysis, information security, and related areas in computer science and mathematics. == Notable journals == Cryptologia Designs, Codes and Cryptography IEEE Transactions on Information Theory International Journal of Information Security Journal of Cryptology Journal of Computer Security ACM Transactions on Privacy and Security Information Processing Letters Information and Computation

  Read more →
• 

  Scrolling

  In computer displays, filmmaking, television production, video games and other kinetic displays, scrolling is sliding text, images or video across a monitor or display, vertically or horizontally. "Scrolling," as such, does not change the layout of the text or pictures but moves (pans or tilts) the user's view across what is apparently a larger image that is not wholly seen. A common television and movie special effect is to scroll credits, while leaving the background stationary. Scrolling may take place completely without user intervention (as in film credits) or, on an interactive device, be triggered by touchscreen or a keypress and continue without further intervention until a further user action, or be entirely controlled by input devices. Scrolling may take place in discrete increments (perhaps one or a few lines of text at a time), or continuously (smooth scrolling). Frame rate is the speed at which an entire image is redisplayed. It is related to scrolling in that changes to text and image position can only happen as often as the image can be redisplayed. When frame rate is a limiting factor, one smooth scrolling technique is to blur images during movement that would otherwise appear to "jump". == Computing == === Implementation === Scrolling is often carried out on a computer by the CPU (software scrolling) or by a graphics processor. Some systems feature hardware scrolling, where an image may be offset as it is displayed, without any frame buffer manipulation (see also hardware windowing). This was especially common in 8 and 16bit video game consoles. === UI paradigms === In a WIMP-style graphical user interface (GUI), user-controlled scrolling is carried out by manipulating a scrollbar with a mouse, or using keyboard shortcuts, often the arrow keys. Scrolling is often supported by text user interfaces and command line interfaces. Older computer terminals changed the entire contents of the display one screenful ("page") at a time; this paging mode requires fewer resources than scrolling. Scrolling displays often also support page mode. Typically certain keys or key combinations page up or down; on PC-compatible keyboards the page up and page down keys or the space bar are used; earlier computers often used control key combinations. Some computer mice have a scroll wheel, which scrolls the display, often vertically, when rolled; others have scroll balls or tilt wheels which allow both vertical and horizontal scrolling. Some software supports other ways of scrolling. Adobe Reader has a mode identified by a small hand icon ("hand tool") on the document, which can then be dragged by clicking on it and moving the mouse as if sliding a large sheet of paper. When this feature is implemented on a touchscreen it is called kinetic scrolling. Touch-screens often use inertial scrolling, in which the scrolling motion of an object continues in a decaying fashion after release of the touch, simulating the appearance of an object with inertia. An early implementation of such behavior was in the "Star7" PDA of Sun Microsystems ca. 1991–1992. Scrolling can be controlled in other software-dependent ways by a PC mouse. Some scroll wheels can be pressed down, functioning like a button. Depending on the software, this allows both horizontal and vertical scrolling by dragging in the direction desired; when the mouse is moved to the original position, scrolling stops. A few scroll wheels can also be tilted, scrolling horizontally in one direction until released. On touchscreen devices, scrolling is a multi-touch gesture, done by swiping a finger on the screen vertically in the direction opposite to where the user wants to scroll to. If any content is too wide to fit on a display, horizontal scrolling is required to view all of it. In applications such as graphics and spreadsheets there is often more content than can fit either the width or the height of the screen at a comfortable scale, and scrolling in both directions is necessary. === Infinite scrolling === In contrast to material divided into discrete pages, the web design approach of infinite scrolling dynamically adds new material to the user display, leading to a continuous, apparently bottomless or endless scrolling experience. === Text === In languages written horizontally, such as most Western languages, text documents longer than will fit on the screen are often displayed wrapped and sized to fit the screen width, and scrolled vertically to bring desired content into view. It is possible to display lines too long to fit the display without wrapping, scrolling horizontally to view each entire line. However, this requires inconvenient constant line-by-line scrolling, while vertical scrolling is only needed after reading a full screenful. Software such as word processors and web browsers normally uses word-wrapping to display as many words in a single line as will fit the width of the screen or window or, for text organised in columns, each column. === Demos === Scrolling texts, also referred to as scrolltexts or scrollers, played an important part in the birth of the computer demo culture. The software crackers often used their deep knowledge of computer platforms to transform the information that accompanied their releases into crack intros. The sole role of these intros was to scroll the text on the screen in an impressive way. == Film and television == Scrolling is commonly used to display the credits at the end of films and television programs. Scrolling is often used in the form of a news ticker towards the bottom of the picture for content such as television news, scrolling sideways across the screen, delivering short-form content. In the dynamic layout of kinetic typography, scrolling typography can scroll across the flat screen, or can appear to recede or advance. An iconic example is the Star Wars opening crawl inspired by the Flash Gordon serials. == Video games == In computer and video games, scrolling of a playing field allows the player to control an object in a large contiguous area. Early examples of this method include Taito's 1974 vertical-scrolling racing video game Speed Race, Sega's 1976 forward-scrolling racing games Moto-Cross (Fonz) and Road Race, and Super Bug. Previously the flip-screen method was used to indicate moving backgrounds. The Namco Galaxian arcade system board introduced with Galaxian in 1979 pioneered a sprite system that animated pre-loaded sprites over a scrolling background, which became the basis for Nintendo's Radar Scope and Donkey Kong arcade hardware and home consoles such as the Nintendo Entertainment System. Parallax scrolling, which was first featured in Moon Patrol, involves several semi-transparent layers (called playfields), which scroll on top of each other at varying rates in order to give an early pseudo-3D illusion of depth. Belt scrolling is a method used in side-scrolling beat 'em up games with a downward camera angle where players can move up and down in addition to left and right. == Studies == A 1993 article by George Fitzmaurice studied spatially aware palmtop computers. These devices had a 3D sensor, and moving the device caused the contents to move as if the contents were fixed in place. This interaction could be referred to as “moving to scroll.” Also, if the user moved the device away from their body, they would zoom in; conversely, the device would zoom out if the user pulled the device closer to them. Smartphone cameras and “optical flow” image analysis utilize this technique nowadays. A 1996 research paper by Jun Rekimoto analyzed tilting operations as scrolling techniques on small screen interfaces. Users could not only tilt to scroll, but also tilt to select menu items. These techniques proved especially useful for field workers, since they only needed to hold and control the device with one hand. A study from 2013 by Selina Sharmin, Oleg Špakov, and Kari-Jouko Räihä explored the action of reading text on a screen while the text auto-scrolls based on the user's eye tracking patterns. The control group simply read text on a screen and manually scrolled. The study found that participants preferred to read primarily at the top of the screen, so the screen scrolled down whenever participants’ eyes began to look toward the bottom of the screen. This auto-scrolling caused no statistically significant difference in reading speed or performance. An undated study occurring during or after 2010 by Dede Frederick, James Mohler, Mihaela Vorvoreanu, and Ronald Glotzbach noted that parallax scrolling "may cause certain people to experience nausea."

  Read more →
• 

  Electronic lab notebook

  An electronic lab notebook or electronic laboratory notebook (ELN) is a computer program designed to replace paper laboratory notebooks. Lab notebooks in general are used by scientists, engineers, and technicians to document research, experiments, and procedures performed in a laboratory. A lab notebook is often maintained to be a legal document and may be used in a court of law as evidence. Similar to an inventor's notebook, the lab notebook is also often referred to in patent prosecution and intellectual property litigation. Electronic lab notebooks offer many benefits to the user as well as organizations; they are easier to search upon, simplify data copying and backups, and support collaboration amongst many users. ELNs can have fine-grained access controls, and can be more secure than their paper counterparts. They also allow the direct incorporation of data from instruments, replacing the practice of printing out data to be stapled into a paper notebook. == Types == ELNs can be divided into two categories: "Specific ELNs" contain features designed to work with specific applications, scientific instrumentation or data types. "Cross-disciplinary ELNs" or "Generic ELNs" are designed to support access to all data and information that needs to be recorded in a lab notebook. Lab Platforms that combine an ELN, LIMS, and scientific data management together, all-in-one configurable software environment. Solutions range from specialized programs designed from the ground up for use as an ELN, to modifications or direct use of more general programs. Examples of using more general software as an ELN include using OpenWetWare, a MediaWiki install (running the same software that Wikipedia uses), WordPress, or the use of general note taking software such as OneNote as an ELN. ELN's come in many different forms. They can be standalone programs, use a client-server model, or be entirely web-based. Some use a lab-notebook approach, others resemble a blog. ELNs are embracing artificial intelligence and LLM technology to provide scientific AI chat assistants. A good many variations on the "ELN" acronym have appeared. Differences between systems with different names are often subtle, with considerable functional overlap between them. Examples include "ERN" (Electronic Research Notebook), "ERMS" (Electronic Resource (or Research or Records) Management System (or Software) and SDMS (Scientific Data (or Document) Management System (or Software). Ultimately, these types of systems all strive to do the same thing: Capture, record, centralize and protect scientific data in a way that is highly searchable, historically accurate, and legally stringent, and which also promotes secure collaboration, greater efficiency, reduced mistakes and lowered total research costs. == Objectives == A good electronic laboratory notebook should offer a secure environment to protect the integrity of both data and process, whilst also affording the flexibility to adopt new processes or changes to existing processes without recourse to further software development. The package architecture should be a modular design, so as to offer the benefit of minimizing validation costs of any subsequent changes that you may wish to make in the future as your needs change. A good electronic laboratory notebook should be an "out of the box" solution that, as standard, has fully configurable forms to comply with the requirements of regulated analytical groups through to a sophisticated ELN for inclusion of structures, spectra, chromatograms, pictures, text, etc. where a preconfigured form is less appropriate. All data within the system may be stored in a database (e.g. MySQL, MS-SQL, Oracle) and be fully searchable. The system should enable data to be collected, stored and retrieved through any combination of forms or ELN that best meets the requirements of the user. The application should enable secure forms to be generated that accept laboratory data input via PCs and/or laptops / palmtops, and should be directly linked to electronic devices such as laboratory balances, pH meters, etc. Networked or wireless communications should be accommodated for by the package which will allow data to be interrogated, tabulated, checked, approved, stored and archived to comply with the latest regulatory guidance and legislation. A system should also include a scheduling option for routine procedures such as equipment qualification and study related timelines. It should include configurable qualification requirements to automatically verify that instruments have been cleaned and calibrated within a specified time period, that reagents have been quality-checked and have not expired, and that workers are trained and authorized to use the equipment and perform the procedures. == Regulatory and legal aspects == The laboratory accreditation criteria found in the ISO 17025 standard needs to be considered for the protection and computer backup of electronic records. These criteria can be found specifically in clause 4.13.1.4 of the standard. Electronic lab notebooks used for development or research in regulated industries, such as medical devices or pharmaceuticals, are expected to comply with FDA regulations related to software validation. The purpose of the regulations is to ensure the integrity of the entries in terms of time, authorship, and content. Unlike ELNs for patent protection, FDA is not concerned with patent interference proceedings, but is concerned with avoidance of falsification. Typical provisions related to software validation are included in the medical device regulations at 21 CFR 820 (et seq.) and Title 21 CFR Part 11. Essentially, the requirements are that the software has been designed and implemented to be suitable for its intended purposes. Evidence to show that this is the case is often provided by a Software Requirements Specification (SRS) setting forth the intended uses and the needs that the ELN will meet; one or more testing protocols that, when followed, demonstrate that the ELN meets the requirements of the specification and that the requirements are satisfied under worst-case conditions. Security, audit trails, prevention of unauthorized changes without substantial collusion of otherwise independent personnel (i.e., those having no interest in the content of the ELN such as independent quality unit personnel) and similar tests are fundamental. Finally, one or more reports demonstrating the results of the testing in accordance with the predefined protocols are required prior to release of the ELN software for use. If the reports show that the software failed to satisfy any of the SRS requirements, then corrective and preventive action ("CAPA") must be undertaken and documented. Such CAPA may extend to minor software revisions, or changes in architecture or major revisions. CAPA activities need to be documented as well. Aside from the requirements to follow such steps for regulated industry, such an approach is generally a good practice in terms of development and release of any software to assure its quality and fitness for use. There are standards related to software development and testing that can be applied (see ref.).

  Read more →
• 

  Factorization of polynomials over finite fields

  In mathematics and computer algebra the factorization of a polynomial consists of decomposing it into a product of irreducible factors. This decomposition is theoretically possible and is unique for polynomials with coefficients in any field, but rather strong restrictions on the field of the coefficients are needed to allow the computation of the factorization by means of an algorithm. In practice, algorithms have been designed only for polynomials with coefficients in a finite field, in the field of rationals or in a finitely generated field extension of one of them. All factorization algorithms, including the case of multivariate polynomials over the rational numbers, reduce the problem to this case; see polynomial factorization. It is also used for various applications of finite fields, such as coding theory (cyclic redundancy codes and BCH codes), cryptography (public key cryptography by the means of elliptic curves), and computational number theory. As the reduction of the factorization of multivariate polynomials to that of univariate polynomials does not have any specificity in the case of coefficients in a finite field, only polynomials with one variable are considered in this article. == Background == === Finite field === The theory of finite fields, whose origins can be traced back to the works of Gauss and Galois, has played a part in various branches of mathematics. Due to the applicability of the concept in other topics of mathematics and sciences like computer science there has been a resurgence of interest in finite fields and this is partly due to important applications in coding theory and cryptography. Applications of finite fields introduce some of these developments in cryptography, computer algebra and coding theory. A finite field or Galois field is a field with a finite order (number of elements). The order of a finite field is always a prime or a power of prime. For each prime power q = pr, there exists exactly one finite field with q elements, up to isomorphism. This field is denoted GF(q) or Fq. If p is prime, GF(p) is the prime field of order p; it is the field of residue classes modulo p, and its p elements are denoted 0, 1, ..., p−1. Thus a = b in GF(p) means the same as a ≡ b (mod p). === Irreducible polynomials === Let F be a finite field. As for general fields, a non-constant polynomial f in F[x] is said to be irreducible over F if it is not the product of two polynomials of positive degree. A polynomial of positive degree that is not irreducible over F is called reducible over F. Irreducible polynomials allow us to construct the finite fields of non-prime order. In fact, for a prime power q, let Fq be the finite field with q elements, unique up to isomorphism. A polynomial f of degree n greater than one, which is irreducible over Fq, defines a field extension of degree n which is isomorphic to the field with qn elements: the elements of this extension are the polynomials of degree lower than n; addition, subtraction and multiplication by an element of Fq are those of the polynomials; the product of two elements is the remainder of the division by f of their product as polynomials; the inverse of an element may be computed by the extended GCD algorithm (see Arithmetic of algebraic extensions). It follows that, to compute in a finite field of non prime order, one needs to generate an irreducible polynomial. For this, the common method is to take a polynomial at random and test it for irreducibility. For sake of efficiency of the multiplication in the field, it is usual to search for polynomials of the shape xn + ax + b. Irreducible polynomials over finite fields are also useful for pseudorandom number generators using feedback shift registers and discrete logarithm over F2n. The number of irreducible monic polynomials of degree n over Fq is the number of aperiodic necklaces, given by Moreau's necklace-counting function Mq(n). The closely related necklace function Nq(n) counts monic polynomials of degree n which are primary (a power of an irreducible); or alternatively irreducible polynomials of all degrees d which divide n. === Example === The polynomial P = x4 + 1 is irreducible over Q but not over any finite field. On any field extension of F2, P = (x + 1)4. On every other finite field, at least one of −1, 2 and −2 is a square, because the product of two non-squares is a square and so we have If − 1 = a 2 , {\displaystyle -1=a^{2},} then P = ( x 2 + a ) ( x 2 − a ) . {\displaystyle P=(x^{2}+a)(x^{2}-a).} If 2 = b 2 , {\displaystyle 2=b^{2},} then P = ( x 2 + b x + 1 ) ( x 2 − b x + 1 ) . {\displaystyle P=(x^{2}+bx+1)(x^{2}-bx+1).} If − 2 = c 2 , {\displaystyle -2=c^{2},} then P = ( x 2 + c x − 1 ) ( x 2 − c x − 1 ) . {\displaystyle P=(x^{2}+cx-1)(x^{2}-cx-1).} === Complexity === Polynomial factoring algorithms use basic polynomial operations such as products, divisions, gcd, powers of one polynomial modulo another, etc. A multiplication of two polynomials of degree at most n can be done in O(n2) operations in Fq using "classical" arithmetic, or in O(nlog(n) log(log(n)) ) operations in Fq using "fast" arithmetic. A Euclidean division (division with remainder) can be performed within the same time bounds. The cost of a polynomial greatest common divisor between two polynomials of degree at most n can be taken as O(n2) operations in Fq using classical methods, or as O(nlog2(n) log(log(n)) ) operations in Fq using fast methods. For polynomials h, g of degree at most n, the exponentiation hq mod g can be done with O(log(q)) polynomial products, using exponentiation by squaring method, that is O(n2log(q)) operations in Fq using classical methods, or O(nlog(q)log(n) log(log(n))) operations in Fq using fast methods. In the algorithms that follow, the complexities are expressed in terms of number of arithmetic operations in Fq, using classical algorithms for the arithmetic of polynomials. == Factoring algorithms == Many algorithms for factoring polynomials over finite fields include the following three stages: Square-free factorization Distinct-degree factorization Equal-degree factorization An important exception is Berlekamp's algorithm, which combines stages 2 and 3. === Berlekamp's algorithm === Berlekamp's algorithm is historically important as being the first factorization algorithm which works well in practice. However, it contains a loop on the elements of the ground field, which implies that it is practicable only over small finite fields. For a fixed ground field, its time complexity is polynomial, but, for general ground fields, the complexity is exponential in the size of the ground field. === Square-free factorization === The algorithm determines a square-free factorization for polynomials whose coefficients come from the finite field Fq of order q = pm with p a prime. This algorithm firstly determines the derivative and then computes the gcd of the polynomial and its derivative. If it is not one then the gcd is again divided into the original polynomial, provided that the derivative is not zero (a case that exists for non-constant polynomials defined over finite fields). This algorithm uses the fact that, if the derivative of a polynomial is zero, then it is a polynomial in xp, which is, if the coefficients belong to Fp, the pth power of the polynomial obtained by substituting x by x1/p. If the coefficients do not belong to Fp, the pth root of a polynomial with zero derivative is obtained by the same substitution on x, completed by applying the inverse of the Frobenius automorphism to the coefficients. This algorithm works also over a field of characteristic zero, with the only difference that it never enters in the blocks of instructions where pth roots are computed. However, in this case, Yun's algorithm is much more efficient because it computes the greatest common divisors of polynomials of lower degrees. A consequence is that, when factoring a polynomial over the integers, the algorithm which follows is not used: one first computes the square-free factorization over the integers, and to factor the resulting polynomials, one chooses a p such that they remain square-free modulo p. Algorithm: SFF (Square-Free Factorization) Input: A monic polynomial f in Fq[x] where q = pm Output: Square-free factorization of f R ← 1 # Make w be the product (without multiplicity) of all factors of f that have # multiplicity not divisible by p c ← gcd(f, f′) w ← f/c # Step 1: Identify all factors in w i ← 1 while w ≠ 1 do y ← gcd(w, c) fac ← w / y R ← R · faci w ← y; c ← c / y; i ← i + 1 end while # c is now the product (with multiplicity) of the remaining factors of f # Step 2: Identify all remaining factors using recursion # Note that these are the factors of f that have multiplicity divisible by p if c ≠ 1 then c ← c1/p R ← R·SFF(c)p end if Output(R) The idea is to identify the product of all irreducible factors of f with the same multiplicity. This is done in two steps. The first step uses the formal d

  Read more →
• 

  Computer-aided software engineering

  Computer-aided software engineering (CASE) is a domain of software tools used to design and implement applications. CASE tools are similar to and are partly inspired by computer-aided design (CAD) tools used for designing hardware products. CASE tools are intended to help develop high-quality, defect-free, and maintainable software. CASE software was often associated with methods for the development of information systems together with automated tools that could be used in the software development process. == History == The Information System Design and Optimization System (ISDOS) project, started in 1968 at the University of Michigan, initiated a great deal of interest in the whole concept of using computer systems to help analysts in the very difficult process of analysing requirements and developing systems. Several papers by Daniel Teichroew fired a whole generation of enthusiasts with the potential of automated systems development. His Problem Statement Language / Problem Statement Analyzer (PSL/PSA) tool was a CASE tool although it predated the term. Another major thread emerged as a logical extension to the data dictionary of a database. By extending the range of metadata held, the attributes of an application could be held within a dictionary and used at runtime. This "active dictionary" became the precursor to the more modern model-driven engineering capability. However, the active dictionary did not provide a graphical representation of any of the metadata. It was the linking of the concept of a dictionary holding analysts' metadata, as derived from the use of an integrated set of techniques, together with the graphical representation of such data that gave rise to the earlier versions of CASE. The next entrant into the market was Excelerator from Index Technology in Cambridge, Mass. While DesignAid ran on Convergent Technologies and later Burroughs Ngen networked microcomputers, Index launched Excelerator on the IBM PC/AT platform. While, at the time of launch, and for several years, the IBM platform did not support networking or a centralized database as did the Convergent Technologies or Burroughs machines, the allure of IBM was strong, and Excelerator came to prominence. Hot on the heels of Excelerator were a rash of offerings from companies such as Knowledgeware (James Martin, Fran Tarkenton and Don Addington), Texas Instrument's CA Gen and Andersen Consulting's FOUNDATION toolset (DESIGN/1, INSTALL/1, FCP). CASE tools were at their peak in the early 1990s. According to the PC Magazine of January 1990, over 100 companies were offering nearly 200 different CASE tools. At the time IBM had proposed AD/Cycle, which was an alliance of software vendors centered on IBM's Software repository using IBM DB2 in mainframe and OS/2: The application development tools can be from several sources: from IBM, from vendors, and from the customers themselves. IBM has entered into relationships with Bachman Information Systems, Index Technology Corporation, and Knowledgeware wherein selected products from these vendors will be marketed through an IBM complementary marketing program to provide offerings that will help to achieve complete life-cycle coverage. With the decline of the mainframe, AD/Cycle and the Big CASE tools died off, opening the market for the mainstream CASE tools of today. Many of the leaders of the CASE market of the early 1990s ended up being purchased by Computer Associates, including IEW, IEF, ADW, Cayenne, and Learmonth & Burchett Management Systems (LBMS). The other trend that led to the evolution of CASE tools was the rise of object-oriented methods and tools. Most of the various tool vendors added some support for object-oriented methods and tools. In addition new products arose that were designed from the bottom up to support the object-oriented approach. Andersen developed its project Eagle as an alternative to Foundation. Several of the thought leaders in object-oriented development each developed their own methodology and CASE tool set: Jacobson, Rumbaugh, Booch, etc. Eventually, these diverse tool sets and methods were consolidated via standards led by the Object Management Group (OMG). The OMG's Unified Modelling Language (UML) is currently widely accepted as the industry standard for object-oriented modeling. == CASE software == === Tools === CASE tools support specific tasks in the software development life-cycle. They can be divided into the following categories: Business and analysis modeling: Graphical modeling tools. E.g., E/R modeling, object modeling, etc. Development: Design and construction phases of the life-cycle. Debugging environments. E.g., IISE LKO. Verification and validation: Analyze code and specifications for correctness, performance, etc. Configuration management: Control the check-in and check-out of repository objects and files. E.g., SCCS, IISE. Metrics and measurement: Analyze code for complexity, modularity (e.g., no "go to's"), performance, etc. Project management: Manage project plans, task assignments, scheduling. Another common way to distinguish CASE tools is the distinction between Upper CASE and Lower CASE. Upper CASE Tools support business and analysis modeling. They support traditional diagrammatic languages such as ER diagrams, Data flow diagram, Structure charts, Decision Trees, Decision tables, etc. Lower CASE Tools support development activities, such as physical design, debugging, construction, testing, component integration, maintenance, and reverse engineering. All other activities span the entire life-cycle and apply equally to upper and lower CASE. === Workbenches === Workbenches integrate two or more CASE tools and support specific software-process activities. Hence they achieve: A homogeneous and consistent interface (presentation integration) Seamless integration of tools and toolchains (control and data integration) An example workbench is Microsoft's Visual Basic programming environment. It incorporates several development tools: a GUI builder, a smart code editor, debugger, etc. Most commercial CASE products tended to be such workbenches that seamlessly integrated two or more tools. Workbenches also can be classified in the same manner as tools; as focusing on Analysis, Development, Verification, etc. as well as being focused on the upper case, lower case, or processes such as configuration management that span the complete life-cycle. === Environments === An environment is a collection of CASE tools or workbenches that attempts to support the complete software process. This contrasts with tools that focus on one specific task or a specific part of the life-cycle. CASE environments are classified by Fuggetta as follows: Toolkits: Loosely coupled collections of tools. These typically build on operating system workbenches such as the Unix Programmer's Workbench or the VMS VAX set. They typically perform integration via piping or some other basic mechanism to share data and pass control. The strength of easy integration is also one of the drawbacks. Simple passing of parameters via technologies such as shell scripting can't provide the kind of sophisticated integration that a common repository database can. Fourth generation: These environments are also known as 4GL standing for fourth generation language environments due to the fact that the early environments were designed around specific languages such as Visual Basic. They were the first environments to provide deep integration of multiple tools. Typically these environments were focused on specific types of applications. For example, user-interface driven applications that did standard atomic transactions to a relational database. Examples are Informix 4GL, and Focus. Language-centered: Environments based on a single often object-oriented language such as the Symbolics Lisp Genera environment or VisualWorks Smalltalk from Parcplace. In these environments all the operating system resources were objects in the object-oriented language. This provides powerful debugging and graphical opportunities but the code developed is mostly limited to the specific language. For this reason, these environments were mostly a niche within CASE. Their use was mostly for prototyping and R&D projects. A common core idea for these environments was the model–view–controller user interface that facilitated keeping multiple presentations of the same design consistent with the underlying model. The MVC architecture was adopted by the other types of CASE environments as well as many of the applications that were built with them. Integrated: These environments are an example of what most IT people tend to think of first when they think of CASE. Environments such as IBM's AD/Cycle, Andersen Consulting's FOUNDATION, the ICL CADES system, and DEC Cohesion. These environments attempt to cover the complete life-cycle from analysis to maintenance and provide an integrated database repository for storing all artifacts of the software pr

  Read more →
• 

  Bandhan Tod

  Bandhan Tod is a mobile app to stop child marriage in India's Bihar state through SOS button in the app. When the SOS on Bandhan Tod is activated, the nearest small NGO will attempt to resolve the issue. If the family resists, then the police gets notified. Till now so many child marriages has been cancelled through Bandhan Tod interventions. Bandhan Tod is an initiative of Gender Alliance managed by Prashanti Tiwari to support the state government's efforts to end child marriage and dowry.

  Read more →
• 

  Sentiment analysis

  Sentiment analysis (also known as opinion mining) is the use of natural language processing, text analysis, computational linguistics, and biometrics to systematically identify, extract, quantify, and study affective states and subjective information. Sentiment analysis is widely applied to voice of the customer materials such as reviews and survey responses, online and social media, and healthcare materials for applications that range from marketing to customer service to clinical medicine. With the rise of deep language models, such as RoBERTa, more difficult data domains can be analyzed, e.g., news texts where authors typically express their opinion/sentiment less explicitly. == Types == A basic task in sentiment analysis is classifying the polarity of a given text at the document, sentence, or feature/aspect level—whether the expressed opinion in a document, a sentence or an entity feature/aspect is positive, negative, or neutral. Advanced, "beyond polarity" sentiment classification looks, for instance, at emotional states such as enjoyment, anger, disgust, sadness, fear, and surprise. Precursors to sentimental analysis include the General Inquirer, which provided hints toward quantifying patterns in text and, separately, psychological research that examined a person's psychological state based on analysis of their verbal behavior. Subsequently, the method described in a patent by Volcani and Fogel, looked specifically at sentiment and identified individual words and phrases in text with respect to different emotional scales. A current system based on their work, called EffectCheck, presents synonyms that can be used to increase or decrease the level of evoked emotion in each scale. Many other subsequent efforts were less sophisticated, using a mere polar view of sentiment, from positive to negative, such as work by Turney, and Pang who applied different methods for detecting the polarity of product reviews and movie reviews respectively. This work is at the document level. One can also classify a document's polarity on a multi-way scale, which was attempted by Pang and Snyder among others: Pang and Lee expanded the basic task of classifying a movie review as either positive or negative to predict star ratings on either a 3- or a 4-star scale, while Snyder performed an in-depth analysis of restaurant reviews, predicting ratings for various aspects of the given restaurant, such as the food and atmosphere (on a five-star scale). First steps to bringing together various approaches—learning, lexical, knowledge-based, etc.—were taken in the 2004 AAAI Spring Symposium where linguists, computer scientists, and other interested researchers first aligned interests and proposed shared tasks and benchmark data sets for the systematic computational research on affect, appeal, subjectivity, and sentiment in text. Even though in most statistical classification methods, the neutral class is ignored under the assumption that neutral texts lie near the boundary of the binary classifier, several researchers suggest that, as in every polarity problem, three categories must be identified. Moreover, it can be proven that specific classifiers such as the Max Entropy and SVMs can benefit from the introduction of a neutral class and improve the overall accuracy of the classification. There are in principle two ways for operating with a neutral class. Either, the algorithm proceeds by first identifying the neutral language, filtering it out and then assessing the rest in terms of positive and negative sentiments, or it builds a three-way classification in one step. This second approach often involves estimating a probability distribution over all categories (e.g. naive Bayes classifiers as implemented by the NLTK). Whether and how to use a neutral class depends on the nature of the data: if the data is clearly clustered into neutral, negative and positive language, it makes sense to filter the neutral language out and focus on the polarity between positive and negative sentiments. If, in contrast, the data are mostly neutral with small deviations towards positive and negative affect, this strategy would make it harder to clearly distinguish between the two poles. A different method for determining sentiment is the use of a scaling system whereby words commonly associated with having a negative, neutral, or positive sentiment are given an associated number on a −10 to +10 scale (most negative up to most positive) or simply from 0 to a positive upper limit such as +4. This makes it possible to adjust the sentiment of a given term relative to its environment (usually on the level of the sentence). When a piece of unstructured text is analyzed using natural language processing, each concept in the specified environment is given a score based on the way sentiment words relate to the concept and its associated score. This allows movement to a more sophisticated understanding of sentiment, because it is now possible to adjust the sentiment value of a concept relative to modifications that may surround it. Words, for example, that intensify, relax or negate the sentiment expressed by the concept can affect its score. Alternatively, texts can be given a positive and negative sentiment strength score if the goal is to determine the sentiment in a text rather than the overall polarity and strength of the text. There are various other types of sentiment analysis, such as aspect-based sentiment analysis, grading sentiment analysis (positive, negative, neutral), multilingual sentiment analysis and detection of emotions. === Subjectivity/objectivity identification === This task is commonly defined as classifying a given text (usually a sentence) into one of two classes: objective or subjective. This problem can sometimes be more difficult than polarity classification. The subjectivity of words and phrases may depend on their context and an objective document may contain subjective sentences (e.g., a news article quoting people's opinions). Moreover, as mentioned by Su, results are largely dependent on the definition of subjectivity used when annotating texts. However, Pang showed that removing objective sentences from a document before classifying its polarity helped improve performance. Subjective and objective identification, emerging subtasks of sentiment analysis to use syntactic, semantic features, and machine learning knowledge to identify if a sentence or document contains facts or opinions. Awareness of recognizing factual and opinions is not recent, having possibly first presented by Carbonell at Yale University in 1979. The term objective refers to the incident carrying factual information. Example of an objective sentence: 'To be elected president of the United States, a candidate must be at least thirty-five years of age.' The term subjective describes the incident contains non-factual information in various forms, such as personal opinions, judgment, and predictions, also known as 'private states'. In the example down below, it reflects a private states 'We Americans'. Moreover, the target entity commented by the opinions can take several forms from tangible product to intangible topic matters stated in Liu (2010). Furthermore, three types of attitudes were observed by Liu (2010), 1) positive opinions, 2) neutral opinions, and 3) negative opinions. Example of a subjective sentence: 'We Americans need to elect a president who is mature and who is able to make wise decisions.' This analysis is a classification problem. Each class's collections of words or phrase indicators are defined for to locate desirable patterns on unannotated text. For subjective expression, a different word list has been created. Lists of subjective indicators in words or phrases have been developed by multiple researchers in the linguist and natural language processing field states in Riloff et al. (2003). A dictionary of extraction rules has to be created for measuring given expressions. Over the years, in subjective detection, the features extraction progression from curating features by hand to automated features learning. At the moment, automated learning methods can further separate into supervised and unsupervised machine learning. Patterns extraction with machine learning process annotated and unannotated text have been explored extensively by academic researchers. However, researchers recognized several challenges in developing fixed sets of rules for expressions respectably. Much of the challenges in rule development stems from the nature of textual information. Six challenges have been recognized by several researchers: 1) metaphorical expressions, 2) discrepancies in writings, 3) context-sensitive, 4) represented words with fewer usages, 5) time-sensitive, and 6) ever-growing volume. Metaphorical expressions. The text contains metaphoric expression may impact on the performance on the extraction. Besides, metaphors take in different forms, which may have been contribu

  Read more →
• 

  Visual cryptography

  Visual cryptography is a cryptographic technique which allows visual information (pictures, text, etc.) to be encrypted in such a way that the decrypted information appears as a visual image. One of the best-known techniques has been credited to Moni Naor and Adi Shamir, who developed it in 1994. They demonstrated a visual secret sharing scheme, where a binary image was broken up into n shares so that only someone with all n shares could decrypt the image, while any n − 1 shares revealed no information about the original image. Each share was printed on a separate transparency, and decryption was performed by overlaying the shares. When all n shares were overlaid, the original image would appear. There are several generalizations of the basic scheme including k-out-of-n visual cryptography, and using opaque sheets but illuminating them by multiple sets of identical illumination patterns under the recording of only one single-pixel detector, which exposed the image. Using a similar idea, transparencies can be used to implement a one-time pad encryption, where one transparency is a shared random pad, and another transparency acts as the ciphertext. Normally, there is an expansion of space requirement in visual cryptography. But if one of the two shares is structured recursively, the efficiency of visual cryptography can be increased to 100%. Some antecedents of visual cryptography are in patents from the 1960s. Other antecedents are in the work on perception and secure communication. Visual cryptography can be used to protect biometric templates in which decryption does not require any complex computations. == Example == In this example, the binary image has been split into two component images. Each component image has a pair of pixels for every pixel in the original image. These pixel pairs are shaded black or white according to the following rule: if the original image pixel was black, the pixel pairs in the component images must be complementary; randomly shade one ■□, and the other □■. When these complementary pairs are overlapped, they will appear dark gray. On the other hand, if the original image pixel was white, the pixel pairs in the component images must match: both ■□ or both □■. When these matching pairs are overlapped, they will appear light gray. So, when the two component images are superimposed, the original image appears. However, without the other component, a component image reveals no information about the original image; it is indistinguishable from a random pattern of ■□ / □■ pairs. Moreover, if you have one component image, you can use the shading rules above to produce a counterfeit component image that combines with it to produce any image at all. == (2, n) visual cryptography sharing case == Sharing a secret with an arbitrary number of people, n, such that at least 2 of them are required to decode the secret is one form of the visual secret sharing scheme presented by Moni Naor and Adi Shamir in 1994. In this scheme we have a secret image which is encoded into n shares printed on transparencies. The shares appear random and contain no decipherable information about the underlying secret image, however if any 2 of the shares are stacked on top of one another the secret image becomes decipherable by the human eye. Every pixel from the secret image is encoded into multiple subpixels in each share image using a matrix to determine the color of the pixels. In the (2, n) case, a white pixel in the secret image is encoded using a matrix from the following set, where each row gives the subpixel pattern for one of the components: {all permutations of the columns of} : C 0 = [ 1 0 . . . 0 1 0 . . . 0 . . . 1 0 . . . 0 ] . {\displaystyle \mathbf {C_{0}=} {\begin{bmatrix}1&0&...&0\\1&0&...&0\\...\\1&0&...&0\end{bmatrix}}.} While a black pixel in the secret image is encoded using a matrix from the following set: {all permutations of the columns of} : C 1 = [ 1 0 . . . 0 0 1 . . . 0 . . . 0 0 . . . 1 ] . {\displaystyle \mathbf {C_{1}=} {\begin{bmatrix}1&0&...&0\\0&1&...&0\\...\\0&0&...&1\end{bmatrix}}.} For instance in the (2,2) sharing case (the secret is split into 2 shares and both shares are required to decode the secret) we use complementary matrices to share a black pixel and identical matrices to share a white pixel. Stacking the shares we have all the subpixels associated with the black pixel now black while 50% of the subpixels associated with the white pixel remain white. == Cheating the (2, n) visual secret sharing scheme == Horng et al. proposed a method that allows n − 1 colluding parties to cheat an honest party in visual cryptography. They take advantage of knowing the underlying distribution of the pixels in the shares to create new shares that combine with existing shares to form a new secret message of the cheaters choosing. We know that 2 shares are enough to decode the secret image using the human visual system. But examining two shares also gives some information about the 3rd share. For instance, colluding participants may examine their shares to determine when they both have black pixels and use that information to determine that another participant will also have a black pixel in that location. Knowing where black pixels exist in another party's share allows them to create a new share that will combine with the predicted share to form a new secret message. In this way a set of colluding parties that have enough shares to access the secret code can cheat other honest parties. == Visual steganography == 2×2 subpixels can also encode a binary image in each component image. For example, each white pixel of each component image could be represented by two black subpixels, while each black pixel represented by three black subpixels. When overlaid, each white pixel of the secret image is represented by three black subpixels, while each black pixel is represented by all four subpixels black. Each corresponding pixel in the component images is randomly rotated to avoid orientation leaking information about the secret image. == In popular culture == In "Do Not Forsake Me Oh My Darling", a 1967 episode of TV series The Prisoner, the protagonist uses a visual cryptography overlay of multiple transparencies to reveal a secret message – the location of a scientist friend who had gone into hiding.

  Read more →