AI Grammar English

AI Grammar English — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  AI safety

  AI safety is an interdisciplinary field focused on preventing accidents, misuse, or other harmful consequences arising from artificial intelligence systems. It encompasses AI alignment (which aims to ensure AI systems behave as intended), monitoring AI systems for risks, and enhancing their robustness. The field is particularly concerned with existential risks posed by advanced AI models. Beyond technical research, AI safety involves developing norms and policies that promote safety, including advocacy for regulations at different levels of government. The field gained significant popularity in 2023, with rapid progress in generative AI and public concerns voiced by researchers and CEOs about potential dangers. During the 2023 AI Safety Summit, the United States and the United Kingdom both established their own AI Safety Institute. However, researchers have expressed concern that AI safety measures are not keeping pace with the rapid development of AI capabilities. == Motivations == Scholars discuss current risks from critical systems failures, bias, and AI-enabled surveillance, as well as emerging risks like technological unemployment, digital manipulation, weaponization, AI-enabled cyberattacks and bioterrorism. They also discuss speculative risks from losing control of future artificial general intelligence (AGI) agents, or from AI enabling perpetually stable dictatorships. === Existential safety === Some have criticized concerns about AGI, such as Andrew Ng who compared them in 2015 to "worrying about overpopulation on Mars when we have not even set foot on the planet yet". Stuart J. Russell on the other side urges caution, arguing that "it is better to anticipate human ingenuity than to underestimate it". AI researchers have widely differing opinions about the severity and primary sources of risk posed by AI technology – though surveys suggest that experts take high consequence risks seriously. In two surveys of AI researchers, the median respondent was optimistic about AI overall, but placed a 5% probability on an "extremely bad (e.g. human extinction)" outcome of advanced AI. In a 2022 survey of the natural language processing community, 37% agreed or weakly agreed that it is plausible that AI decisions could lead to a catastrophe that is "at least as bad as an all-out nuclear war". == History == Risks from AI began to be seriously discussed at the start of the computer age: Moreover, if we move in the direction of making machines which learn and whose behavior is modified by experience, we must face the fact that every degree of independence we give the machine is a degree of possible defiance of our wishes. In 1988 Blay Whitby published a book outlining the need for AI to be developed along ethical and socially responsible lines. From 2008 to 2009, the Association for the Advancement of Artificial Intelligence (AAAI) commissioned a study to explore and address potential long-term societal influences of AI research and development. The panel was generally skeptical of the radical views expressed by science-fiction authors but agreed that "additional research would be valuable on methods for understanding and verifying the range of behaviors of complex computational systems to minimize unexpected outcomes". In 2011, Roman Yampolskiy introduced the term "AI safety engineering" at the Philosophy and Theory of Artificial Intelligence conference, listing prior failures of AI systems and arguing that "the frequency and seriousness of such events will steadily increase as AIs become more capable". In 2014, philosopher Nick Bostrom published the book Superintelligence: Paths, Dangers, Strategies. He has the opinion that the rise of AGI has the potential to create various societal issues, ranging from the displacement of the workforce by AI, manipulation of political and military structures, to even the possibility of human extinction. His argument that future advanced systems may pose a threat to human existence prompted Elon Musk, Bill Gates, and Stephen Hawking to voice similar concerns. In 2015, dozens of artificial intelligence experts signed an open letter on artificial intelligence calling for research on the societal impacts of AI and outlining concrete directions. To date, the letter has been signed by over 8000 people including Yann LeCun, Shane Legg, Yoshua Bengio, and Stuart Russell. In the same year, a group of academics led by professor Stuart J. Russell founded the Center for Human-Compatible AI at the University of California Berkeley and the Future of Life Institute awarded $6.5 million in grants for research aimed at "ensuring artificial intelligence (AI) remains safe, ethical and beneficial". In 2016, the White House Office of Science and Technology Policy and Carnegie Mellon University announced The Public Workshop on Safety and Control for Artificial Intelligence, which was one of a sequence of four White House workshops aimed at investigating "the advantages and drawbacks" of AI. In the same year, Concrete Problems in AI Safety – one of the first and most influential technical AI Safety agendas – was published. In 2017, the Future of Life Institute sponsored the Asilomar Conference on Beneficial AI, where more than 100 thought leaders formulated principles for beneficial AI including "Race Avoidance: Teams developing AI systems should actively cooperate to avoid corner-cutting on safety standards". In 2018, the DeepMind Safety team outlined AI safety problems in specification, robustness, and assurance. The following year, researchers organized a workshop at ICLR that focused on these problem areas. In 2021, Unsolved Problems in ML Safety was published, outlining research directions in robustness, monitoring, alignment, and systemic safety. In 2023, Rishi Sunak said he wants the United Kingdom to be the "geographical home of global AI safety regulation" and to host the first global summit on AI safety. The AI safety summit took place in November 2023, and focused on the risks of misuse and loss of control associated with frontier AI models. During the summit the intention to create the International Scientific Report on the Safety of Advanced AI was announced. In 2024, The US and UK forged a new partnership on the science of AI safety. The MoU was signed on 1 April 2024 by US commerce secretary Gina Raimondo and UK technology secretary Michelle Donelan to jointly develop advanced AI model testing, following commitments announced at an AI Safety Summit in Bletchley Park in November. In 2025, an international team of 96 experts chaired by Yoshua Bengio published the first International AI Safety Report. The report, commissioned by 30 nations and the United Nations, represents the first global scientific review of potential risks associated with advanced artificial intelligence. It details potential threats stemming from misuse, malfunction, and societal disruption, with the objective of informing policy through evidence-based findings, without providing specific recommendations. == Research focus == AI safety research areas include robustness, monitoring, and alignment. === Robustness === ==== Adversarial robustness ==== AI systems are often vulnerable to adversarial examples or "inputs to machine learning (ML) models that an attacker has intentionally designed to cause the model to make a mistake". For example, in 2013, Szegedy et al. discovered that adding specific imperceptible perturbations to an image could cause it to be misclassified with high confidence. This continues to be an issue with neural networks, though in recent work the perturbations are generally large enough to be perceptible. The image on the right is predicted to be an ostrich after the perturbation is applied. (Left) is a correctly predicted sample, (center) perturbation applied magnified by 10x, (right) adversarial example. Adversarial robustness is often associated with security. Researchers demonstrated that an audio signal could be imperceptibly modified so that speech-to-text systems transcribe it to any message the attacker chooses. Network intrusion and malware detection systems also must be adversarially robust since attackers may design their attacks to fool detectors. Models that represent objectives (reward models) must also be adversarially robust. For example, a reward model might estimate how helpful a text response is and a language model might be trained to maximize this score. Researchers have shown that if a language model is trained for long enough, it will leverage the vulnerabilities of the reward model to achieve a better score and perform worse on the intended task. This issue can be addressed by improving the adversarial robustness of the reward model. More generally, any AI system used to evaluate another AI system must be adversarially robust. This could include monitoring tools, since they could also potentially be tampered with to produce a higher reward. Large language models (LLMs) can be vulnerable to prom

  Read more →
• 

  Growth function

  The growth function, also called the shatter coefficient or the shattering number, measures the richness of a set family or class of functions. It is especially used in the context of statistical learning theory, where it is used to study properties of statistical learning methods. The term 'growth function' was coined by Vapnik and Chervonenkis in their 1968 paper, where they also proved many of its properties. It is a basic concept in machine learning. == Definitions == === Set-family definition === Let H {\displaystyle H} be a set family (a set of sets) and C {\displaystyle C} a set. Their intersection is defined as the following set-family: H ∩ C := { h ∩ C ∣ h ∈ H } {\displaystyle H\cap C:=\{h\cap C\mid h\in H\}} The intersection-size (also called the index) of H {\displaystyle H} with respect to C {\displaystyle C} is | H ∩ C | {\displaystyle |H\cap C|} . If a set C m {\displaystyle C_{m}} has m {\displaystyle m} elements then the index is at most 2 m {\displaystyle 2^{m}} . If the index is exactly 2m then the set C {\displaystyle C} is said to be shattered by H {\displaystyle H} , because H ∩ C {\displaystyle H\cap C} contains all the subsets of C {\displaystyle C} , i.e.: | H ∩ C | = 2 | C | , {\displaystyle |H\cap C|=2^{|C|},} The growth function measures the size of H ∩ C {\displaystyle H\cap C} as a function of | C | {\displaystyle |C|} . Formally: Growth ⁡ ( H , m ) := max C : | C | = m | H ∩ C | {\displaystyle \operatorname {Growth} (H,m):=\max _{C:|C|=m}|H\cap C|} === Hypothesis-class definition === Equivalently, let H {\displaystyle H} be a hypothesis-class (a set of binary functions) and C {\displaystyle C} a set with m {\displaystyle m} elements. The restriction of H {\displaystyle H} to C {\displaystyle C} is the set of binary functions on C {\displaystyle C} that can be derived from H {\displaystyle H} : H C := { ( h ( x 1 ) , … , h ( x m ) ) ∣ h ∈ H , x i ∈ C } {\displaystyle H_{C}:=\{(h(x_{1}),\ldots ,h(x_{m}))\mid h\in H,x_{i}\in C\}} The growth function measures the size of H C {\displaystyle H_{C}} as a function of | C | {\displaystyle |C|} : Growth ⁡ ( H , m ) := max C : | C | = m | H C | {\displaystyle \operatorname {Growth} (H,m):=\max _{C:|C|=m}|H_{C}|} == Examples == 1. The domain is the real line R {\displaystyle \mathbb {R} } . The set-family H {\displaystyle H} contains all the half-lines (rays) from a given number to positive infinity, i.e., all sets of the form { x > x 0 ∣ x ∈ R } {\displaystyle \{x>x_{0}\mid x\in \mathbb {R} \}} for some x 0 ∈ R {\displaystyle x_{0}\in \mathbb {R} } . For any set C {\displaystyle C} of m {\displaystyle m} real numbers, the intersection H ∩ C {\displaystyle H\cap C} contains m + 1 {\displaystyle m+1} sets: the empty set, the set containing the largest element of C {\displaystyle C} , the set containing the two largest elements of C {\displaystyle C} , and so on. Therefore: Growth ⁡ ( H , m ) = m + 1 {\displaystyle \operatorname {Growth} (H,m)=m+1} . The same is true whether H {\displaystyle H} contains open half-lines, closed half-lines, or both. 2. The domain is the segment [ 0 , 1 ] {\displaystyle [0,1]} . The set-family H {\displaystyle H} contains all the open sets. For any finite set C {\displaystyle C} of m {\displaystyle m} real numbers, the intersection H ∩ C {\displaystyle H\cap C} contains all possible subsets of C {\displaystyle C} . There are 2 m {\displaystyle 2^{m}} such subsets, so Growth ⁡ ( H , m ) = 2 m {\displaystyle \operatorname {Growth} (H,m)=2^{m}} . 3. The domain is the Euclidean space R n {\displaystyle \mathbb {R} ^{n}} . The set-family H {\displaystyle H} contains all the half-spaces of the form: x ⋅ ϕ ≥ 1 {\displaystyle x\cdot \phi \geq 1} , where ϕ {\displaystyle \phi } is a fixed vector. Then Growth ⁡ ( H , m ) = Comp ⁡ ( n , m ) {\displaystyle \operatorname {Growth} (H,m)=\operatorname {Comp} (n,m)} , where Comp is the number of components in a partitioning of an n-dimensional space by m hyperplanes. 4. The domain is the real line R {\displaystyle \mathbb {R} } . The set-family H {\displaystyle H} contains all the real intervals, i.e., all sets of the form { x ∈ [ x 0 , x 1 ] | x ∈ R } {\displaystyle \{x\in [x_{0},x_{1}]|x\in \mathbb {R} \}} for some x 0 , x 1 ∈ R {\displaystyle x_{0},x_{1}\in \mathbb {R} } . For any set C {\displaystyle C} of m {\displaystyle m} real numbers, the intersection H ∩ C {\displaystyle H\cap C} contains all runs of between 0 and m {\displaystyle m} consecutive elements of C {\displaystyle C} . The number of such runs is ( m + 1 2 ) + 1 {\displaystyle {m+1 \choose 2}+1} , so Growth ⁡ ( H , m ) = ( m + 1 2 ) + 1 {\displaystyle \operatorname {Growth} (H,m)={m+1 \choose 2}+1} . == Polynomial or exponential == The main property that makes the growth function interesting is that it can be either polynomial or exponential - nothing in-between. The following is a property of the intersection-size: If, for some set C m {\displaystyle C_{m}} of size m {\displaystyle m} , and for some number n ≤ m {\displaystyle n\leq m} , | H ∩ C m | ≥ Comp ⁡ ( n , m ) {\displaystyle |H\cap C_{m}|\geq \operatorname {Comp} (n,m)} - then, there exists a subset C n ⊆ C m {\displaystyle C_{n}\subseteq C_{m}} of size n {\displaystyle n} such that | H ∩ C n | = 2 n {\displaystyle |H\cap C_{n}|=2^{n}} . This implies the following property of the Growth function. For every family H {\displaystyle H} there are two cases: The exponential case: Growth ⁡ ( H , m ) = 2 m {\displaystyle \operatorname {Growth} (H,m)=2^{m}} identically. The polynomial case: Growth ⁡ ( H , m ) {\displaystyle \operatorname {Growth} (H,m)} is majorized by Comp ⁡ ( n , m ) ≤ m n + 1 {\displaystyle \operatorname {Comp} (n,m)\leq m^{n}+1} , where n {\displaystyle n} is the smallest integer for which Growth ⁡ ( H , n ) < 2 n {\displaystyle \operatorname {Growth} (H,n)<2^{n}} . == Other properties == === Trivial upper bound === For any finite H {\displaystyle H} : Growth ⁡ ( H , m ) ≤ | H | {\displaystyle \operatorname {Growth} (H,m)\leq |H|} since for every C {\displaystyle C} , the number of elements in H ∩ C {\displaystyle H\cap C} is at most | H | {\displaystyle |H|} . Therefore, the growth function is mainly interesting when H {\displaystyle H} is infinite. === Exponential upper bound === For any nonempty H {\displaystyle H} : Growth ⁡ ( H , m ) ≤ 2 m {\displaystyle \operatorname {Growth} (H,m)\leq 2^{m}} I.e, the growth function has an exponential upper-bound. We say that a set-family H {\displaystyle H} shatters a set C {\displaystyle C} if their intersection contains all possible subsets of C {\displaystyle C} , i.e. H ∩ C = 2 C {\displaystyle H\cap C=2^{C}} . If H {\displaystyle H} shatters C {\displaystyle C} of size m {\displaystyle m} , then Growth ⁡ ( H , C ) = 2 m {\displaystyle \operatorname {Growth} (H,C)=2^{m}} , which is the upper bound. === Cartesian intersection === Define the Cartesian intersection of two set-families as: H 1 ⨂ H 2 := { h 1 ∩ h 2 ∣ h 1 ∈ H 1 , h 2 ∈ H 2 } {\displaystyle H_{1}\bigotimes H_{2}:=\{h_{1}\cap h_{2}\mid h_{1}\in H_{1},h_{2}\in H_{2}\}} . Then: Growth ⁡ ( H 1 ⨂ H 2 , m ) ≤ Growth ⁡ ( H 1 , m ) ⋅ Growth ⁡ ( H 2 , m ) {\displaystyle \operatorname {Growth} (H_{1}\bigotimes H_{2},m)\leq \operatorname {Growth} (H_{1},m)\cdot \operatorname {Growth} (H_{2},m)} === Union === For every two set-families: Growth ⁡ ( H 1 ∪ H 2 , m ) ≤ Growth ⁡ ( H 1 , m ) + Growth ⁡ ( H 2 , m ) {\displaystyle \operatorname {Growth} (H_{1}\cup H_{2},m)\leq \operatorname {Growth} (H_{1},m)+\operatorname {Growth} (H_{2},m)} === VC dimension === The VC dimension of H {\displaystyle H} is defined according to these two cases: In the polynomial case, VCDim ⁡ ( H ) = n − 1 {\displaystyle \operatorname {VCDim} (H)=n-1} = the largest integer d {\displaystyle d} for which Growth ⁡ ( H , d ) = 2 d {\displaystyle \operatorname {Growth} (H,d)=2^{d}} . In the exponential case VCDim ⁡ ( H ) = ∞ {\displaystyle \operatorname {VCDim} (H)=\infty } . So VCDim ⁡ ( H ) ≥ d {\displaystyle \operatorname {VCDim} (H)\geq d} if-and-only-if Growth ⁡ ( H , d ) = 2 d {\displaystyle \operatorname {Growth} (H,d)=2^{d}} . The growth function can be regarded as a refinement of the concept of VC dimension. The VC dimension only tells us whether Growth ⁡ ( H , d ) {\displaystyle \operatorname {Growth} (H,d)} is equal to or smaller than 2 d {\displaystyle 2^{d}} , while the growth function tells us exactly how Growth ⁡ ( H , m ) {\displaystyle \operatorname {Growth} (H,m)} changes as a function of m {\displaystyle m} . Another connection between the growth function and the VC dimension is given by the Sauer–Shelah lemma: If VCDim ⁡ ( H ) = d {\displaystyle \operatorname {VCDim} (H)=d} , then: for all m {\displaystyle m} : Growth ⁡ ( H , m ) ≤ ∑ i = 0 d ( m i ) {\displaystyle \operatorname {Growth} (H,m)\leq \sum _{i=0}^{d}{m \choose i}} In particular, for all m > d + 1 {\displaystyle m>d+1} : Growth ⁡ ( H , m ) ≤ ( e m / d ) d = O ( m d ) {\displaystyle \operatorname {Growth} (H,m)\leq (

  Read more →
• 

  IBM Watsonx

  Watsonx is a platform by IBM for building and managing artificial intelligence (AI) applications for business use. Released on May 9, 2023, the platform provides software tools and infrastructure for companies to work with both IBM's own AI models and models from third-party sources. The platform consists of three main components: watsonx.ai, a studio for training, validating, and deploying AI models; watsonx.data, a system for storing and managing data used by the models; and watsonx.governance, a toolkit to ensure AI applications are compliant with company policies and regulations. A key feature of the platform is that it can be trained on a company's private data to perform specialized tasks, a process known as fine-tuning. IBM states that this client-specific data is not used to train its own models. == History == Watsonx was introduced on May 9, 2023, at the annual IBM Think conference, as a platform that includes multiple services. Just like Watson AI computer with the similar name, Watsonx was named after Thomas J. Watson, IBM's founder and first CEO. On February 13, 2024, Anaconda partnered with IBM to embed its open-source Python packages into Watsonx. Watsonx is used at ESPN's Fantasy Football App for managing players' performance, and by Italian telecommunications company Wind Tre. It was employed to generate editorial content around nominees during the 66th Annual Grammy Awards. In 2025, Wimbledon integrated IBM watsonx generative AI into its app and website. Integrated with IBM Safer Payments, IBM watsonx has been used in banking sector fraud detection and anti-money laundering (AML) systems. == Services == === watsonx.ai === Watsonx.ai is a platform that allows AI developers to leverage a wide range of LLMs under IBM's own Granite series and others such as Facebook's LLaMA-2, free and open-source model Mistral, and many others present in the Hugging Face community. These models come pre-trained and optimized for various natural language processing (NLP) applications.The platform also allows fine-tuning with its Tuning Studio. === watsonx.data === Watsonx.data is a platform designed to assist clients in addressing issues related to data volume, complexity, cost, and governance.. The platform facilitates seamless data access, whether stored in the cloud or on-premises, through a single entry point. === watsonx.governance === Watsonx.governance is a platform that utilizes IBM's AI capabilities to implement AI lifecycle governance. This helps them manage risks and maintain compliance with evolving AI and industry regulations, while reducing AI bias through automated oversight.

  Read more →
• 

  Sparse PCA

  Sparse principal component analysis (SPCA or sparse PCA) is a technique used in statistical analysis and, in particular, in the analysis of multivariate data sets. It extends the classic method of principal component analysis (PCA) for the reduction of dimensionality of data by introducing sparsity structures to the input variables. A particular disadvantage of ordinary PCA is that the principal components are usually linear combinations of all input variables. SPCA overcomes this disadvantage by finding components that are linear combinations of just a few input variables (SPCs). This means that some of the coefficients of the linear combinations defining the SPCs, called loadings, are equal to zero. The number of nonzero loadings is called the cardinality of the SPC. == Mathematical formulation == Consider a data matrix, X {\displaystyle X} , where each of the p {\displaystyle p} columns represent an input variable, and each of the n {\displaystyle n} rows represents an independent sample from data population. One assumes each column of X {\displaystyle X} has mean zero, otherwise one can subtract column-wise mean from each element of X {\displaystyle X} . Let Σ = 1 n − 1 X ⊤ X {\displaystyle \Sigma ={\frac {1}{n-1}}X^{\top }X} be the empirical covariance matrix of X {\displaystyle X} , which has dimension p × p {\displaystyle p\times p} . Given an integer k {\displaystyle k} with 1 ≤ k ≤ p {\displaystyle 1\leq k\leq p} , the sparse PCA problem can be formulated as maximizing the variance along a direction represented by vector v ∈ R p {\displaystyle v\in \mathbb {R} ^{p}} while constraining its cardinality: max v T Σ v subject to ‖ v ‖ 2 = 1 ‖ v ‖ 0 ≤ k . {\displaystyle {\begin{aligned}\max \quad &v^{T}\Sigma v\\{\text{subject to}}\quad &\left\Vert v\right\Vert _{2}=1\\&\left\Vert v\right\Vert _{0}\leq k.\end{aligned}}} Eq. 1 The first constraint specifies that v is a unit vector. In the second constraint, ‖ v ‖ 0 {\displaystyle \left\Vert v\right\Vert _{0}} represents the ℓ 0 {\displaystyle \ell _{0}} pseudo-norm of v, which is defined as the number of its non-zero components. So the second constraint specifies that the number of non-zero components in v is less than or equal to k, which is typically an integer that is much smaller than dimension p. The optimal value of Eq. 1 is known as the k-sparse largest eigenvalue. If one takes k=p, the problem reduces to the ordinary PCA, and the optimal value becomes the largest eigenvalue of covariance matrix Σ. After finding the optimal solution v, one deflates Σ to obtain a new matrix Σ 1 = Σ − ( v T Σ v ) v v T , {\displaystyle \Sigma _{1}=\Sigma -(v^{T}\Sigma v)vv^{T},} and iterate this process to obtain further principal components. However, unlike PCA, sparse PCA cannot guarantee that different principal components are orthogonal. In order to achieve orthogonality, additional constraints must be enforced. The following equivalent definition is in matrix form. Let V {\displaystyle V} be a p×p symmetric matrix, one can rewrite the sparse PCA problem as max T r ( Σ V ) subject to T r ( V ) = 1 ‖ V ‖ 0 ≤ k 2 R a n k ( V ) = 1 , V ⪰ 0. {\displaystyle {\begin{aligned}\max \quad &Tr(\Sigma V)\\{\text{subject to}}\quad &Tr(V)=1\\&\Vert V\Vert _{0}\leq k^{2}\\&Rank(V)=1,V\succeq 0.\end{aligned}}} Eq. 2 Tr is the matrix trace, and ‖ V ‖ 0 {\displaystyle \Vert V\Vert _{0}} represents the non-zero elements in matrix V. The last line specifies that V has matrix rank one and is positive semidefinite. The last line means that one has V = v v T {\displaystyle V=vv^{T}} , so Eq. 2 is equivalent to Eq. 1. Moreover, the rank constraint in this formulation is actually redundant, and therefore sparse PCA can be cast as the following mixed-integer semidefinite program max T r ( Σ V ) subject to T r ( V ) = 1 | V i , i | ≤ z i , ∀ i ∈ { 1 , . . . , p } , | V i , j | ≤ 1 2 z i , ∀ i , j ∈ { 1 , . . . , p } : i ≠ j , V ⪰ 0 , z ∈ { 0 , 1 } p , ∑ i z i ≤ k {\displaystyle {\begin{aligned}\max \quad &Tr(\Sigma V)\\{\text{subject to}}\quad &Tr(V)=1\\&\vert V_{i,i}\vert \leq z_{i},\forall i\in \{1,...,p\},\vert V_{i,j}\vert \leq {\frac {1}{2}}z_{i},\forall i,j\in \{1,...,p\}:i\neq j,\\&V\succeq 0,z\in \{0,1\}^{p},\sum _{i}z_{i}\leq k\end{aligned}}} Eq. 3 Because of the cardinality constraint, the maximization problem is hard to solve exactly, especially when dimension p is high. In fact, the sparse PCA problem in Eq. 1 is NP-hard in the strong sense. == Computational considerations == As most sparse problems, variable selection in SPCA is a computationally intractable non-convex NP-hard problem, therefore greedy sub-optimal algorithms are often employed to find solutions. Note also that SPCA introduces hyperparameters quantifying in what capacity large parameter values are penalized. These might need tuning to achieve satisfactory performance, thereby adding to the total computational cost. == Algorithms for SPCA == Several alternative approaches (of Eq. 1) have been proposed, including a regression framework, a penalized matrix decomposition framework, a convex relaxation/semidefinite programming framework, a generalized power method framework an alternating maximization framework forward-backward greedy search and exact methods using branch-and-bound techniques, a certifiably optimal branch-and-bound approach Bayesian formulation framework. A certifiably optimal mixed-integer semidefinite branch-and-cut approach The methodological and theoretical developments of Sparse PCA as well as its applications in scientific studies are recently reviewed in a survey paper. === Notes on Semidefinite Programming Relaxation === It has been proposed that sparse PCA can be approximated by semidefinite programming (SDP). If one drops the rank constraint and relaxes the cardinality constraint by a 1-norm convex constraint, one gets a semidefinite programming relaxation, which can be solved efficiently in polynomial time: max T r ( Σ V ) subject to T r ( V ) = 1 1 T | V | 1 ≤ k V ⪰ 0. {\displaystyle {\begin{aligned}\max \quad &Tr(\Sigma V)\\{\text{subject to}}\quad &Tr(V)=1\\&\mathbf {1} ^{T}|V|\mathbf {1} \leq k\\&V\succeq 0.\end{aligned}}} Eq. 3 In the second constraint, 1 {\displaystyle \mathbf {1} } is a p×1 vector of ones, and |V| is the matrix whose elements are the absolute values of the elements of V. The optimal solution V {\displaystyle V} to the relaxed problem Eq. 3 is not guaranteed to have rank one. In that case, V {\displaystyle V} can be truncated to retain only the dominant eigenvector. While the semidefinite program does not scale beyond n=300 covariates, it has been shown that a second-order cone relaxation of the semidefinite relaxation is almost as tight and successfully solves problems with n=1000s of covariates == Applications == === Financial Data Analysis === Suppose ordinary PCA is applied to a dataset where each input variable represents a different asset, it may generate principal components that are weighted combination of all the assets. In contrast, sparse PCA would produce principal components that are weighted combination of only a few input assets, so one can easily interpret its meaning. Furthermore, if one uses a trading strategy based on these principal components, fewer assets imply less transaction costs. === Biology === Consider a dataset where each input variable corresponds to a specific gene. Sparse PCA can produce a principal component that involves only a few genes, so researchers can focus on these specific genes for further analysis. === High-dimensional Hypothesis Testing === Contemporary datasets often have the number of input variables ( p {\displaystyle p} ) comparable with or even much larger than the number of samples ( n {\displaystyle n} ). It has been shown that if p / n {\displaystyle p/n} does not converge to zero, the classical PCA is not consistent. In other words, if we let k = p {\displaystyle k=p} in Eq. 1, then the optimal value does not converge to the largest eigenvalue of data population when the sample size n → ∞ {\displaystyle n\rightarrow \infty } , and the optimal solution does not converge to the direction of maximum variance. But sparse PCA can retain consistency even if p ≫ n . {\displaystyle p\gg n.} The k-sparse largest eigenvalue (the optimal value of Eq. 1) can be used to discriminate an isometric model, where every direction has the same variance, from a spiked covariance model in high-dimensional setting. Consider a hypothesis test where the null hypothesis specifies that data X {\displaystyle X} are generated from a multivariate normal distribution with mean 0 and covariance equal to an identity matrix, and the alternative hypothesis specifies that data X {\displaystyle X} is generated from a spiked model with signal strength θ {\displaystyle \theta } : H 0 : X ∼ N ( 0 , I p ) , H 1 : X ∼ N ( 0 , I p + θ v v T ) , {\displaystyle H_{0}:X\sim N(0,I_{p}),\quad H_{1}:X\sim N(0,I_{p}+\theta vv^{T}),} where v ∈ R p {\displaystyle v\in \mathbb {R} ^{p}

  Read more →
• 

  Sample (graphics)

  In computer graphics, a sample is an intersection of a channel and a pixel. The diagram below depicts a 24-bit pixel, consisting of 3 samples for Red, Green, and Blue. In this particular diagram, the Red sample occupies 9 bits, the Green sample occupies 7 bits and the Blue sample occupies 8 bits, totaling 24 bits per pixel. Note that the samples do not have to be equal size and not all samples are mandatory in a pixel. Also, a pixel can consist of more than 3 samples (e.g. 4 samples of the RGBA color space). A sample is related to a subpixel on a physical display.

  Read more →
• 

  Stochastic variance reduction

  (Stochastic) variance reduction is an algorithmic approach to minimizing functions that can be decomposed into finite sums. By exploiting the finite sum structure, variance reduction techniques are able to achieve convergence rates that are impossible to achieve with methods that treat the objective as an infinite sum, as in the classical Stochastic approximation setting. Variance reduction approaches are widely used for training machine learning models such as logistic regression and support vector machines as these problems have finite-sum structure and uniform conditioning that make them ideal candidates for variance reduction. == Finite sum objectives == A function f {\displaystyle f} is considered to have finite sum structure if it can be decomposed into a summation or average: f ( x ) = 1 n ∑ i = 1 n f i ( x ) , {\displaystyle f(x)={\frac {1}{n}}\sum _{i=1}^{n}f_{i}(x),} where the function value and derivative of each f i {\displaystyle f_{i}} can be queried independently. Although variance reduction methods can be applied for any positive n {\displaystyle n} and any f i {\displaystyle f_{i}} structure, their favorable theoretical and practical properties arise when n {\displaystyle n} is large compared to the condition number of each f i {\displaystyle f_{i}} , and when the f i {\displaystyle f_{i}} have similar (but not necessarily identical) Lipschitz smoothness and strong convexity constants. The finite sum structure should be contrasted with the stochastic approximation setting which deals with functions of the form f ( θ ) = E ξ ⁡ [ F ( θ , ξ ) ] {\textstyle f(\theta )=\operatorname {E} _{\xi }[F(\theta ,\xi )]} which is the expected value of a function depending on a random variable ξ {\textstyle \xi } . Any finite sum problem can be optimized using a stochastic approximation algorithm by using F ( ⋅ , ξ ) = f ξ {\displaystyle F(\cdot ,\xi )=f_{\xi }} . == Rapid Convergence == Stochastic variance reduced methods without acceleration are able to find a minima of f {\displaystyle f} within accuracy ϵ > {\displaystyle \epsilon >} , i.e. f ( x ) − f ( x ∗ ) ≤ ϵ {\displaystyle f(x)-f(x_{})\leq \epsilon } in a number of steps of the order: O ( ( L μ + n ) log ⁡ ( 1 ϵ ) ) . {\displaystyle O\left(\left({\frac {L}{\mu }}+n\right)\log \left({\frac {1}{\epsilon }}\right)\right).} The number of steps depends only logarithmically on the level of accuracy required, in contrast to the stochastic approximation framework, where the number of steps O ( L / ( μ ϵ ) ) {\displaystyle O{\bigl (}L/(\mu \epsilon ){\bigr )}} required grows proportionally to the accuracy required. Stochastic variance reduction methods converge almost as fast as the gradient descent method's O ( ( L / μ ) log ⁡ ( 1 / ϵ ) ) {\displaystyle O{\bigl (}(L/\mu )\log(1/\epsilon ){\bigr )}} rate, despite using only a stochastic gradient, at a 1 / n {\displaystyle 1/n} lower cost than gradient descent. Accelerated methods in the stochastic variance reduction framework achieve even faster convergence rates, requiring only O ( ( n L μ + n ) log ⁡ ( 1 ϵ ) ) {\displaystyle O\left(\left({\sqrt {\frac {nL}{\mu }}}+n\right)\log \left({\frac {1}{\epsilon }}\right)\right)} steps to reach ϵ {\displaystyle \epsilon } accuracy, potentially n {\displaystyle {\sqrt {n}}} faster than non-accelerated methods. Lower complexity bounds. for the finite sum class establish that this rate is the fastest possible for smooth strongly convex problems. == Approaches == Variance reduction approaches fall within four main categories: table averaging methods, full-gradient snapshot methods, recursive estimator methods (e.g., SARAH), and dual methods. Each category contains methods designed for dealing with convex, non-smooth, and non-convex problems, each differing in hyper-parameter settings and other algorithmic details. === SAGA === In the SAGA method, the prototypical table averaging approach, a table of size n {\displaystyle n} is maintained that contains the last gradient witnessed for each f i {\displaystyle f_{i}} term, which we denote g i {\displaystyle g_{i}} . At each step, an index i {\displaystyle i} is sampled, and a new gradient ∇ f i ( x k ) {\displaystyle \nabla f_{i}(x_{k})} is computed. The iterate x k {\displaystyle x_{k}} is updated with: x k + 1 = x k − γ [ ∇ f i ( x k ) − g i + 1 n ∑ i = 1 n g i ] , {\displaystyle x_{k+1}=x_{k}-\gamma \left[\nabla f_{i}(x_{k})-g_{i}+{\frac {1}{n}}\sum _{i=1}^{n}g_{i}\right],} and afterwards table entry i {\displaystyle i} is updated with g i = ∇ f i ( x k ) {\displaystyle g_{i}=\nabla f_{i}(x_{k})} . SAGA is among the most popular of the variance reduction methods due to its simplicity, easily adaptable theory, and excellent performance. It is the successor of the SAG method, improving on its flexibility and performance. === SVRG === The stochastic variance reduced gradient method (SVRG), the prototypical snapshot method, uses a similar update except instead of using the average of a table it instead uses a full-gradient that is reevaluated at a snapshot point x ~ {\displaystyle {\tilde {x}}} at regular intervals of m ≥ n {\displaystyle m\geq n} iterations. The update becomes: x k + 1 = x k − γ [ ∇ f i ( x k ) − ∇ f i ( x ~ ) + ∇ f ( x ~ ) ] , {\displaystyle x_{k+1}=x_{k}-\gamma [\nabla f_{i}(x_{k})-\nabla f_{i}({\tilde {x}})+\nabla f({\tilde {x}})],} This approach requires two stochastic gradient evaluations per step, one to compute ∇ f i ( x k ) {\displaystyle \nabla f_{i}(x_{k})} and one to compute ∇ f i ( x ~ ) , {\displaystyle \nabla f_{i}({\tilde {x}}),} where-as table averaging approaches need only one. Despite the high computational cost, SVRG is popular as its simple convergence theory is highly adaptable to new optimization settings. It also has lower storage requirements than tabular averaging approaches, which make it applicable in many settings where tabular methods can not be used. === SARAH === The SARAH (stochastic recursive gradient) method maintains a recursive estimator of the gradient rather than storing a table of past gradients (as in SAGA) or computing periodic full-gradient snapshots (as in SVRG). At the start of an inner loop, a full gradient is computed at a reference point x ~ {\displaystyle {\tilde {x}}} : v 0 = ∇ f ( x ~ ) {\displaystyle v_{0}=\nabla f({\tilde {x}})} . For inner iterations, with a sampled index i k {\displaystyle i_{k}} , the gradient estimator and iterate are updated by: v k = ∇ f i k ( x k ) − ∇ f i k ( x k − 1 ) + v k − 1 , x k + 1 = x k − γ v k . {\displaystyle v_{k}=\nabla f_{i_{k}}(x_{k})-\nabla f_{i_{k}}(x_{k-1})+v_{k-1},\qquad x_{k+1}=x_{k}-\gamma v_{k}.} This recursion requires two component-gradient evaluations per step ∇ f i k ( x k ) {\displaystyle \nabla f_{i_{k}}(x_{k})} and ∇ f i k ( x k − 1 ) {\displaystyle \nabla f_{i_{k}}(x_{k-1})} but does not need to store per-sample gradients, resulting in lower memory cost than table-averaging methods. SARAH admits linear convergence for strongly convex functions and has been extended to more general nonconvex and composite problems. === SDCA === Exploiting the dual representation of the objective leads to another variance reduction approach that is particularly suited to finite-sums where each term has a structure that makes computing the convex conjugate f i ∗ , {\displaystyle f_{i}^{},} or its proximal operator tractable. The standard SDCA method considers finite sums that have additional structure compared to generic finite sum setting: f ( x ) = 1 n ∑ i = 1 n f i ( x T v i ) + λ 2 ‖ x ‖ 2 , {\displaystyle f(x)={\frac {1}{n}}\sum _{i=1}^{n}f_{i}(x^{T}v_{i})+{\frac {\lambda }{2}}\|x\|^{2},} where each f i {\displaystyle f_{i}} is 1 dimensional and each v i {\displaystyle v_{i}} is a data point associated with f i {\displaystyle f_{i}} . SDCA solves the dual problem: max α ∈ R n − 1 n ∑ i = 1 n f i ∗ ( − α i ) − λ 2 ‖ 1 λ n ∑ i = 1 n α i v i ‖ 2 , {\displaystyle \max _{\alpha \in \mathbb {R} ^{n}}-{\frac {1}{n}}\sum _{i=1}^{n}f_{i}^{}(-\alpha _{i})-{\frac {\lambda }{2}}\left\|{\frac {1}{\lambda n}}\sum _{i=1}^{n}\alpha _{i}v_{i}\right\|^{2},} by a stochastic coordinate ascent procedure, where at each step the objective is optimized with respect to a randomly chosen coordinate α i {\displaystyle \alpha _{i}} , leaving all other coordinates the same. An approximate primal solution x {\displaystyle x} can be recovered from the α {\displaystyle \alpha } values: x = 1 λ n ∑ i = 1 n α i v i {\displaystyle x={\frac {1}{\lambda n}}\sum _{i=1}^{n}\alpha _{i}v_{i}} . This method obtains similar theoretical rates of convergence to other stochastic variance reduced methods, while avoiding the need to specify a step-size parameter. It is fast in practice when λ {\displaystyle \lambda } is large, but significantly slower than the other approaches when λ {\displaystyle \lambda } is small. == Accelerated approaches == Accelerated variance reduction methods are built upon the standard methods above. The earliest approaches make use of proximal operators t

  Read more →
• 

  Analogical modeling

  Analogical modeling (AM) is a formal theory of exemplar based analogical reasoning, proposed by Royal Skousen, professor of Linguistics and English language at Brigham Young University in Provo, Utah. It is applicable to language modeling and other categorization tasks. Analogical modeling is related to connectionism and nearest neighbor approaches, in that it is data-based rather than abstraction-based; but it is distinguished by its ability to cope with imperfect datasets (such as caused by simulated short term memory limits) and to base predictions on all relevant segments of the dataset, whether near or far. In language modeling, AM has successfully predicted empirically valid forms for which no theoretical explanation was known (see the discussion of Finnish morphology in Skousen et al. 2002). == Implementation == === Overview === An exemplar-based model consists of a general-purpose modeling engine and a problem-specific dataset. Within the dataset, each exemplar (a case to be reasoned from, or an informative past experience) appears as a feature vector: a row of values for the set of parameters that define the problem. For example, in a spelling-to-sound task, the feature vector might consist of the letters of a word. Each exemplar in the dataset is stored with an outcome, such as a phoneme or phone to be generated. When the model is presented with a novel situation (in the form of an outcome-less feature vector), the engine algorithmically sorts the dataset to find exemplars that helpfully resemble it, and selects one, whose outcome is the model's prediction. The particulars of the algorithm distinguish one exemplar-based modeling system from another. In AM, we think of the feature values as characterizing a context, and the outcome as a behavior that occurs within that context. Accordingly, the novel situation is known as the given context. Given the known features of the context, the AM engine systematically generates all contexts that include it (all of its supracontexts), and extracts from the dataset the exemplars that belong to each. The engine then discards those supracontexts whose outcomes are inconsistent (this measure of consistency will be discussed further below), leaving an analogical set of supracontexts, and probabilistically selects an exemplar from the analogical set with a bias toward those in large supracontexts. This multilevel search exponentially magnifies the likelihood of a behavior's being predicted as it occurs reliably in settings that specifically resemble the given context. === Analogical modeling in detail === AM performs the same process for each case it is asked to evaluate. The given context, consisting of n variables, is used as a template to generate 2 n {\displaystyle 2^{n}} supracontexts. Each supracontext is a set of exemplars in which one or more variables have the same values that they do in the given context, and the other variables are ignored. In effect, each is a view of the data, created by filtering for some criteria of similarity to the given context, and the total set of supracontexts exhausts all such views. Alternatively, each supracontext is a theory of the task or a proposed rule whose predictive power needs to be evaluated. It is important to note that the supracontexts are not equal peers one with another; they are arranged by their distance from the given context, forming a hierarchy. If a supracontext specifies all of the variables that another one does and more, it is a subcontext of that other one, and it lies closer to the given context. (The hierarchy is not strictly branching; each supracontext can itself be a subcontext of several others, and can have several subcontexts.) This hierarchy becomes significant in the next step of the algorithm. The engine now chooses the analogical set from among the supracontexts. A supracontext may contain exemplars that only exhibit one behavior; it is deterministically homogeneous and is included. It is a view of the data that displays regularity, or a relevant theory that has never yet been disproven. A supracontext may exhibit several behaviors, but contain no exemplars that occur in any more specific supracontext (that is, in any of its subcontexts); in this case it is non-deterministically homogeneous and is included. Here there is no great evidence that a systematic behavior occurs, but also no counterargument. Finally, a supracontext may be heterogeneous, meaning that it exhibits behaviors that are found in a subcontext (closer to the given context), and also behaviors that are not. Where the ambiguous behavior of the nondeterministically homogeneous supracontext was accepted, this is rejected because the intervening subcontext demonstrates that there is a better theory to be found. The heterogeneous supracontext is therefore excluded. This guarantees that we see an increase in meaningfully consistent behavior in the analogical set as we approach the given context. With the analogical set chosen, each appearance of an exemplar (for a given exemplar may appear in several of the analogical supracontexts) is given a pointer to every other appearance of an exemplar within its supracontexts. One of these pointers is then selected at random and followed, and the exemplar to which it points provides the outcome. This gives each supracontext an importance proportional to the square of its size, and makes each exemplar likely to be selected in direct proportion to the sum of the sizes of all analogically consistent supracontexts in which it appears. Then, of course, the probability of predicting a particular outcome is proportional to the summed probabilities of all the exemplars that support it. (Skousen 2002, in Skousen et al. 2002, pp. 11–25, and Skousen 2003, both passim) === Formulas === Given a context with n {\displaystyle n} elements: total number of pairings: n 2 {\displaystyle n^{2}} number of agreements for outcome i: n i 2 {\displaystyle n_{i}^{2}} number of disagreements for outcome i: n i ( n − n i ) {\displaystyle n_{i}(n-n_{i})} total number of agreements: ∑ n i 2 {\displaystyle \sum {n_{i}^{2}}} total number of disagreements: ∑ n i ( n − n i ) = n 2 − ∑ n i 2 {\displaystyle \sum {n_{i}(n-n_{i})}=n^{2}-\sum {n_{i}^{2}}} === Example === This terminology is best understood through an example. In the example used in the second chapter of Skousen (1989), each context consists of three variables with potential values 0-3 Variable 1: 0,1,2,3 Variable 2: 0,1,2,3 Variable 3: 0,1,2,3 The two outcomes for the dataset are e and r, and the exemplars are: 3 1 0 e 0 3 2 r 2 1 0 r 2 1 2 r 3 1 1 r We define a network of pointers like so: The solid lines represent pointers between exemplars with matching outcomes; the dotted lines represent pointers between exemplars with non-matching outcomes. The statistics for this example are as follows: n = 5 {\displaystyle n=5} n r = 4 {\displaystyle n_{r}=4} n e = 1 {\displaystyle n_{e}=1} total number of pairings: n 2 = 25 {\displaystyle n^{2}=25} number of agreements for outcome r: n r 2 = 16 {\displaystyle n_{r}^{2}=16} number of agreements for outcome e: n e 2 = 1 {\displaystyle n_{e}^{2}=1} number of disagreements for outcome r: n r ( n − n r ) = 4 {\displaystyle n_{r}(n-n_{r})=4} number of disagreements for outcome e: n e ( n − n e ) = 4 {\displaystyle n_{e}(n-n_{e})=4} total number of agreements: n r 2 + n e 2 = 17 {\displaystyle n_{r}^{2}+n_{e}^{2}=17} total number of disagreements: n r ( n − n r ) + n e ( n − n e ) = n 2 − ( n r 2 + n e 2 ) = 8 {\displaystyle n_{r}(n-n_{r})+n_{e}(n-n_{e})=n^{2}-(n_{r}^{2}+n_{e}^{2})=8} uncertainty or fraction of disagreement: 8 / 25 = .32 {\displaystyle 8/25=.32} Behavior can only be predicted for a given context; in this example, let us predict the outcome for the context "3 1 2". To do this, we first find all of the contexts containing the given context; these contexts are called supracontexts. We find the supracontexts by systematically eliminating the variables in the given context; with m variables, there will generally be 2 m {\displaystyle 2^{m}} supracontexts. The following table lists each of the sub- and supracontexts; x means "not x", and - means "anything". These contexts are shown in the venn diagram below: The next step is to determine which exemplars belong to which contexts in order to determine which of the contexts are homogeneous. The table below shows each of the subcontexts, their behavior in terms of the given exemplars, and the number of disagreements within the behavior: Analyzing the subcontexts in the table above, we see that there is only 1 subcontext with any disagreements: "3 1 2", which in the dataset consists of "3 1 0 e" and "3 1 1 r". There are 2 disagreements in this subcontext; 1 pointing from each of the exemplars to the other (see the pointer network pictured above). Therefore, only supracontexts containing this subcontext will contain any disagreements. We use a simple rule to identify the homogeneous supraco

  Read more →
• 

  Concept class

  In computational learning theory in mathematics, a concept over a domain X is a total Boolean function over X. A concept class is a class of concepts. Concept classes are a subject of computational learning theory. Concept class terminology frequently appears in model theory associated with probably approximately correct (PAC) learning. In this setting, if one takes a set Y as a set of (classifier output) labels, and X is a set of examples, the map c : X → Y {\displaystyle c:X\to Y} , i.e. from examples to classifier labels (where Y = { 0 , 1 } {\displaystyle Y=\{0,1\}} and where c is a subset of X), c is then said to be a concept. A concept class C {\displaystyle C} is then a collection of such concepts. Given a class of concepts C, a subclass D is reachable if there exists a sample s such that D contains exactly those concepts in C that are extensions to s. Not every subclass is reachable. == Background == A sample s {\displaystyle s} is a partial function from X {\displaystyle X} to { 0 , 1 } {\displaystyle \{0,1\}} . Identifying a concept with its characteristic function mapping X {\displaystyle X} to { 0 , 1 } {\displaystyle \{0,1\}} , it is a special case of a sample. Two samples are consistent if they agree on the intersection of their domains. A sample s ′ {\displaystyle s'} extends another sample s {\displaystyle s} if the two are consistent and the domain of s {\displaystyle s} is contained in the domain of s ′ {\displaystyle s'} . == Examples == Suppose that C = S + ( X ) {\displaystyle C=S^{+}(X)} . Then: the subclass { { x } } {\displaystyle \{\{x\}\}} is reachable with the sample s = { ( x , 1 ) } {\displaystyle s=\{(x,1)\}} ; the subclass S + ( Y ) {\displaystyle S^{+}(Y)} for Y ⊆ X {\displaystyle Y\subseteq X} are reachable with a sample that maps the elements of X − Y {\displaystyle X-Y} to zero; the subclass S ( X ) {\displaystyle S(X)} , which consists of the singleton sets, is not reachable. == Applications == Let C {\displaystyle C} be some concept class. For any concept c ∈ C {\displaystyle c\in C} , we call this concept 1 / d {\displaystyle 1/d} -good for a positive integer d {\displaystyle d} if, for all x ∈ X {\displaystyle x\in X} , at least 1 / d {\displaystyle 1/d} of the concepts in C {\displaystyle C} agree with c {\displaystyle c} on the classification of x {\displaystyle x} . The fingerprint dimension F D ( C ) {\displaystyle FD(C)} of the entire concept class C {\displaystyle C} is the least positive integer d {\displaystyle d} such that every reachable subclass C ′ ⊆ C {\displaystyle C'\subseteq C} contains a concept that is 1 / d {\displaystyle 1/d} -good for it. This quantity can be used to bound the minimum number of equivalence queries needed to learn a class of concepts according to the following inequality: F D ( C ) − 1 ≤ # E Q ( C ) ≤ ⌈ F D ( C ) ln ⁡ ( | C | ) ⌉ {\textstyle FD(C)-1\leq \#EQ(C)\leq \lceil FD(C)\ln(|C|)\rceil } .

  Read more →
• 

  Managed private cloud

  Managed private cloud (also known as "hosted private cloud" or "single-tenant SaaS") refers to a principle in software architecture where a single instance of the software runs on a server, serves a single client organization (tenant), and is managed by a third party. The third-party provider is responsible for providing the hardware for the server and also for preliminary maintenance. This is in contrast to multitenancy, where multiple client organizations share a single server, or an on-premises deployment, where the client organization hosts its software instance. Managed private clouds also fall under the larger umbrella of cloud computing. == Adoption == The need for private clouds arose due to enterprises requiring a dedicated service and infrastructure for their cloud computing needs, such as for business-critical operations, improved security, and better control over their resources. Managed private cloud adoption is a popular choice among organizations. It has been on the rise due to enterprises requiring a dedicated cloud environment and preferring to avoid having to deal with management, maintenance, or future upgrade costs for the associated infrastructure and services. Such operational costs are unavoidable in on-premises private cloud data centers. == Advantages and challenges of managed private cloud == A managed private cloud cuts down on upkeep costs by outsourcing infrastructure management and maintenance to the managed cloud provider. It is easier to integrate an organization's existing software, services, and applications into a dedicated cloud hosting infrastructure which can be customized to the client's needs instead of a public cloud platform, whose hardware or infrastructure/software platform cannot be individualized to each client. Customers who choose a managed private cloud deployment usually choose them because of their desire for efficient cloud deployment, but also have the need for service customization or integration only available in a single-tenant environment. This chart shows the key benefits of the different types of deployments, and shows the overlap between these cloud solutions. This chart shows key drawbacks. Since deployments are done in a single-tenant environment, it is usually cost-prohibitive for small and medium-sized businesses. While server upkeep and maintenance are handled by the service provider, including network management and security, the client is charged for all such services. It is up to the potential client to determine if a managed private cloud solution aligns with their business objectives and budget. While the service provider maintains the upkeep of servers, network, and platform infrastructure, sensitive data is typically not stored on managed private clouds as it may leave business-critical information prone to breaches via third-party attacks on the cloud service provider. Common customizations and integrations include: Active Directory Single Sign-on Learning Management Systems Video Teleconferencing == Deployment strategies and service providers == Software companies have taken a variety of strategies in the Managed Private Cloud realm. Some software organizations have provided managed private cloud options internally, such as Microsoft. Companies that offer an on-premises deployment option, by definition, enable third-party companies to market Managed Private Cloud solutions. A few managed private cloud service providers are: Adobe Connect: Adobe Connect may be purchased for on-premises deployment, multi-tenant hosted deployment, managed private cloud as ACMS, or managed by third-party managed private cloud provider ConnectSolutions. Rackspace CenturyLink Microsoft licenses for Lync, SharePoint and Exchange may be purchased for on-premises deployment, a multi-tenant hosted deployment via Office 365, or managed by third-party cloud hosting from Azaleos, ConnectSolutions and others.

  Read more →
• 

  Distributional Soft Actor Critic

  Distributional Soft Actor Critic (DSAC) is a suite of model-free off-policy reinforcement learning algorithms, tailored for learning decision-making or control policies in complex systems with continuous action spaces. Distinct from traditional methods that focus solely on expected returns, DSAC algorithms are designed to learn a Gaussian distribution over stochastic returns, called value distribution. This focus on Gaussian value distribution learning notably diminishes value overestimations, which in turn boosts policy performance. Additionally, the value distribution learned by DSAC can also be used for risk-aware policy learning. From a technical standpoint, DSAC is essentially a distributional adaptation of the well-established soft actor-critic (SAC) method. To date, the DSAC family comprises two iterations: the original DSAC-v1 and its successor, DSAC-T (also known as DSAC-v2), with the latter demonstrating superior capabilities over the Soft Actor-Critic (SAC) in Mujoco benchmark tasks. The source code for DSAC-T can be found at the following URL: Jingliang-Duan/DSAC-T. Both iterations have been integrated into an advanced, Pytorch-powered reinforcement learning toolkit named GOPS: GOPS (General Optimal control Problem Solver).

  Read more →
• 

  Radial basis function kernel

  In machine learning, the radial basis function kernel, or RBF kernel, is a popular kernel function used in various kernelized learning algorithms. In particular, it is commonly used in support vector machine classification. The RBF kernel on two samples x , x ′ ∈ R k {\displaystyle \mathbf {x} ,\mathbf {x'} \in \mathbb {R} ^{k}} , represented as feature vectors in some input space, is defined as K ( x , x ′ ) = exp ⁡ ( − ‖ x − x ′ ‖ 2 2 σ 2 ) {\displaystyle K(\mathbf {x} ,\mathbf {x'} )=\exp \left(-{\frac {\|\mathbf {x} -\mathbf {x'} \|^{2}}{2\sigma ^{2}}}\right)} ‖ x − x ′ ‖ 2 {\displaystyle \textstyle \|\mathbf {x} -\mathbf {x'} \|^{2}} may be recognized as the squared Euclidean distance between the two feature vectors. σ {\displaystyle \sigma } is a free parameter. An equivalent definition involves a parameter γ = 1 2 σ 2 {\displaystyle \textstyle \gamma ={\tfrac {1}{2\sigma ^{2}}}} : K ( x , x ′ ) = exp ⁡ ( − γ ‖ x − x ′ ‖ 2 ) {\displaystyle K(\mathbf {x} ,\mathbf {x'} )=\exp(-\gamma \|\mathbf {x} -\mathbf {x'} \|^{2})} Since the value of the RBF kernel decreases with distance and ranges between zero (in the infinite-distance limit) and one (when x = x'), it has a ready interpretation as a similarity measure. The feature space of the kernel has an infinite number of dimensions; for σ = 1 {\displaystyle \sigma =1} , its expansion using the multinomial theorem is: exp ⁡ ( − 1 2 ‖ x − x ′ ‖ 2 ) = exp ⁡ ( 2 2 x ⊤ x ′ − 1 2 ‖ x ‖ 2 − 1 2 ‖ x ′ ‖ 2 ) = exp ⁡ ( x ⊤ x ′ ) exp ⁡ ( − 1 2 ‖ x ‖ 2 ) exp ⁡ ( − 1 2 ‖ x ′ ‖ 2 ) = ∑ j = 0 ∞ ( x ⊤ x ′ ) j j ! exp ⁡ ( − 1 2 ‖ x ‖ 2 ) exp ⁡ ( − 1 2 ‖ x ′ ‖ 2 ) = ∑ j = 0 ∞ ∑ n 1 + n 2 + ⋯ + n k = j exp ⁡ ( − 1 2 ‖ x ‖ 2 ) x 1 n 1 ⋯ x k n k n 1 ! ⋯ n k ! exp ⁡ ( − 1 2 ‖ x ′ ‖ 2 ) x ′ 1 n 1 ⋯ x ′ k n k n 1 ! ⋯ n k ! = ⟨ φ ( x ) , φ ( x ′ ) ⟩ {\displaystyle {\begin{alignedat}{2}\exp \left(-{\frac {1}{2}}\|\mathbf {x} -\mathbf {x'} \|^{2}\right)&=\exp \left({\frac {2}{2}}\mathbf {x} ^{\top }\mathbf {x'} -{\frac {1}{2}}\|\mathbf {x} \|^{2}-{\frac {1}{2}}\|\mathbf {x'} \|^{2}\right)\\[5pt]&=\exp \left(\mathbf {x} ^{\top }\mathbf {x'} \right)\exp \left(-{\frac {1}{2}}\|\mathbf {x} \|^{2}\right)\exp \left(-{\frac {1}{2}}\|\mathbf {x'} \|^{2}\right)\\[5pt]&=\sum _{j=0}^{\infty }{\frac {(\mathbf {x} ^{\top }\mathbf {x'} )^{j}}{j!}}\exp \left(-{\frac {1}{2}}\|\mathbf {x} \|^{2}\right)\exp \left(-{\frac {1}{2}}\|\mathbf {x'} \|^{2}\right)\\[5pt]&=\sum _{j=0}^{\infty }\quad \sum _{n_{1}+n_{2}+\dots +n_{k}=j}\exp \left(-{\frac {1}{2}}\|\mathbf {x} \|^{2}\right){\frac {x_{1}^{n_{1}}\cdots x_{k}^{n_{k}}}{\sqrt {n_{1}!\cdots n_{k}!}}}\exp \left(-{\frac {1}{2}}\|\mathbf {x'} \|^{2}\right){\frac {{x'}_{1}^{n_{1}}\cdots {x'}_{k}^{n_{k}}}{\sqrt {n_{1}!\cdots n_{k}!}}}\\[5pt]&=\langle \varphi (\mathbf {x} ),\varphi (\mathbf {x'} )\rangle \end{alignedat}}} φ ( x ) = exp ⁡ ( − 1 2 ‖ x ‖ 2 ) ( a ℓ 0 ( 0 ) , a 1 ( 1 ) , … , a ℓ 1 ( 1 ) , … , a 1 ( j ) , … , a ℓ j ( j ) , … ) {\displaystyle \varphi (\mathbf {x} )=\exp \left(-{\frac {1}{2}}\|\mathbf {x} \|^{2}\right)\left(a_{\ell _{0}}^{(0)},a_{1}^{(1)},\dots ,a_{\ell _{1}}^{(1)},\dots ,a_{1}^{(j)},\dots ,a_{\ell _{j}}^{(j)},\dots \right)} where ℓ j = ( k + j − 1 j ) {\displaystyle \ell _{j}={\tbinom {k+j-1}{j}}} , a ℓ ( j ) = x 1 n 1 ⋯ x k n k n 1 ! ⋯ n k ! | n 1 + n 2 + ⋯ + n k = j ∧ 1 ≤ ℓ ≤ ℓ j {\displaystyle a_{\ell }^{(j)}={\frac {x_{1}^{n_{1}}\cdots x_{k}^{n_{k}}}{\sqrt {n_{1}!\cdots n_{k}!}}}\quad |\quad n_{1}+n_{2}+\dots +n_{k}=j\wedge 1\leq \ell \leq \ell _{j}} == Approximations == Because support vector machines and other models employing the kernel trick do not scale well to large numbers of training samples or large numbers of features in the input space, several approximations to the RBF kernel (and similar kernels) have been introduced. Typically, these take the form of a function z that maps a single vector to a vector of higher dimensionality, approximating the kernel: ⟨ z ( x ) , z ( x ′ ) ⟩ ≈ ⟨ φ ( x ) , φ ( x ′ ) ⟩ = K ( x , x ′ ) {\displaystyle \langle z(\mathbf {x} ),z(\mathbf {x'} )\rangle \approx \langle \varphi (\mathbf {x} ),\varphi (\mathbf {x'} )\rangle =K(\mathbf {x} ,\mathbf {x'} )} where φ {\displaystyle \textstyle \varphi } is the implicit mapping embedded in the RBF kernel. === Fourier random features === One way to construct such a z is to randomly sample from the Fourier transformation of the kernel φ ( x ) = 1 D [ cos ⁡ ⟨ w 1 , x ⟩ , sin ⁡ ⟨ w 1 , x ⟩ , … , cos ⁡ ⟨ w D , x ⟩ , sin ⁡ ⟨ w D , x ⟩ ] T {\displaystyle \varphi (x)={\frac {1}{\sqrt {D}}}[\cos \langle w_{1},x\rangle ,\sin \langle w_{1},x\rangle ,\ldots ,\cos \langle w_{D},x\rangle ,\sin \langle w_{D},x\rangle ]^{T}} where w 1 , . . . , w D {\displaystyle w_{1},...,w_{D}} are independent samples from the normal distribution N ( 0 , σ − 2 I ) {\displaystyle N(0,\sigma ^{-2}I)} . Theorem: E ⁡ [ ⟨ φ ( x ) , φ ( y ) ⟩ ] = e ‖ x − y ‖ 2 / ( 2 σ 2 ) . {\displaystyle \operatorname {E} [\langle \varphi (x),\varphi (y)\rangle ]=e^{\|x-y\|^{2}/(2\sigma ^{2})}.} Proof: It suffices to prove the case of D = 1 {\displaystyle D=1} . Use the trigonometric identity cos ⁡ ( a − b ) = cos ⁡ ( a ) cos ⁡ ( b ) + sin ⁡ ( a ) sin ⁡ ( b ) {\displaystyle \cos(a-b)=\cos(a)\cos(b)+\sin(a)\sin(b)} , the spherical symmetry of Gaussian distribution, then evaluate the integral ∫ − ∞ ∞ cos ⁡ ( k x ) e − x 2 / 2 2 π d x = e − k 2 / 2 . {\displaystyle \int _{-\infty }^{\infty }{\frac {\cos(kx)e^{-x^{2}/2}}{\sqrt {2\pi }}}dx=e^{-k^{2}/2}.} Theorem: Var ⁡ [ ⟨ φ ( x ) , φ ( y ) ⟩ ] = O ( D − 1 ) {\displaystyle \operatorname {Var} [\langle \varphi (x),\varphi (y)\rangle ]=O(D^{-1})} . (Appendix A.2). === Nyström method === Another approach uses the Nyström method to approximate the eigendecomposition of the Gram matrix K, using only a random sample of the training set.

  Read more →
• 

  Log-linear model

  A log-linear model is a mathematical model that takes the form of a function whose logarithm equals a linear combination of the parameters of the model, which makes it possible to apply (possibly multivariate) linear regression. That is, it has the general form exp ⁡ ( c + ∑ i w i f i ( X ) ) {\displaystyle \exp \left(c+\sum _{i}w_{i}f_{i}(X)\right)} , in which the fi(X) are quantities that are functions of the variable X, in general a vector of values, while c and the wi stand for the model parameters. The term may specifically be used for: A log-linear plot or graph, which is a type of semi-log plot. Poisson regression for contingency tables, a type of generalized linear model. The specific applications of log-linear models are where the output quantity lies in the range 0 to ∞, for values of the independent variables X, or more immediately, the transformed quantities fi(X) in the range −∞ to +∞. This may be contrasted to logistic models, similar to the logistic function, for which the output quantity lies in the range 0 to 1. Thus the contexts where these models are useful or realistic often depends on the range of the values being modelled.

  Read more →
• 

  Biopython

  Biopython is an open-source collection of non-commercial Python modules for computational biology and bioinformatics. It makes robust and well-tested code easily accessible to researchers. Python is an object-oriented programming language and is a suitable choice for automation of common tasks. The availability of reusable libraries saves development time and lets researchers focus on addressing scientific questions. Biopython is constantly updated and maintained by a large team of volunteers across the globe. Biopython contains parsers for diverse bioinformatic sequence, alignment, and structure formats. Sequence formats include FASTA, FASTQ, GenBank, and EMBL. Alignment formats include Clustal, BLAST, PHYLIP, and NEXUS. Structural formats include the PDB, which contains the 3D atomic coordinates of the macromolecules. It has provisions to access information from biological databases like NCBI, Expasy, PBD, and BioSQL. This can be used in scripts or incorporated into their software. Biopython contains a standard sequence class, sequence alignment, and motif analysis tools. It also has clustering algorithms, a module for structural biology, and a module for phylogenetics analysis. == History == The development of Biopython began in 1999, and it was first released in July 2000. First "semi-complete" and "semi-stable" release was done in March 2001 and December 2002 respectively. It was developed during a similar time frame and with analogous goals to other projects that added bioinformatics capabilities to their respective programming languages, including BioPerl, BioRuby and BioJava. Early developers on the project included Jeff Chang, Andrew Dalke and Brad Chapman, though over 100 people have made contributions to date. In 2007, a similar Python project, namely PyCogent, was established. The initial scope of Biopython involved accessing, indexing and processing biological sequence files. The retrieved data from common biological databases will then be parsed into a python data structure. While this is still a major focus, over the following years added modules have extended its functionality to cover additional areas of biology. The key challenge in the design of parsers for bioinformatics file formats is the frequency at which the data formats change. This is due to inadequate curation of the structure of the data, and changes in the database contents. This problem is overcome by the application of a standard event-oriented parser design (see Key features and examples). As of version 1.77, Biopython no longer supports Python 2. The current stable release of Biopython version 1.85 was released on 15 January 2025. It only supports Python 3 and the recent releases of Biopython require NumPy (and not Numeric). == Design == Wherever possible, Biopython follows the conventions used by the Python programming language to make it easier for users familiar with Python. For example, Seq and SeqRecord objects can be manipulated via slicing, in a manner similar to Python's strings and lists. It is also designed to be functionally similar to other Bio projects, such as BioPerl. It is organized into modular sub-packages, e.g., Bio.Seq, Bio.Align, Bio.PDB, Bio.Entrez each of them useful in a different bioinformatics domain. It used principles, like encapsulation and polymorphism, notably in classes Seq, SeqRecord, and Bio.PDB.Structure. It can also interoperate with other Python tools (Pandas, Matplotlib and SciPy). Biopython can read and write most common file formats for each of its functional areas, and its license is permissive and compatible with most other software licenses, which allows Biopython to be used in a variety of software projects. == Requirements == Biopython is currently supported and tested with the following Python implementations: Python 3 or PyPy3 NumPy == Key features and examples == === Input and output === Biopython can read and write to a number of common formats. When reading files, descriptive information in the file is used to populate the members of Biopython classes, such as SeqRecord. This allows records of one file format to be converted into others. Very large sequence files can exceed a computer's memory resources, so Biopython provides various options for accessing records in large files. They can be loaded entirely into memory in Python data structures, such as lists or dictionaries, providing fast access at the cost of memory usage. Alternatively, the files can be read from disk as needed, with slower performance but lower memory requirements. === Sequences === A core concept in Biopython is the biological sequence, and this is represented by the Seq class. A Biopython Seq object is similar to a Python string in many respects: it supports the Python slice notation, can be concatenated with other sequences and is immutable. This object includes both general string-like and biological sequence-specific methods. It is best to store information about the biological type (DNA, RNA, protein) separately from the sequence, rather than using an explicit alphabet argument. === Sequence annotation === The SeqRecord class describes sequences, along with information such as name, description and features in the form of SeqFeature objects. Each SeqFeature object specifies the type of the feature and its location. Feature types can be ‘gene’, ‘CDS’ (coding sequence), ‘repeat_region’, ‘mobile_element’ or others, and the position of features in the sequence can be exact or approximate. === Accessing online databases === Through the Bio.Entrez module, users of Biopython can download biological data from NCBI databases. Each of the functions provided by the Entrez search engine is available through functions in this module, including searching for and downloading records. === Phylogeny === The Bio.Phylo module provides tools for working with and visualising phylogenetic trees. A variety of file formats are supported for reading and writing, including Newick, NEXUS and phyloXML. Common tree manipulations and traversals are supported via the Tree and Clade objects. Examples include converting and collating tree files, extracting subsets from a tree, changing a tree's root, and analysing branch features such as length or score. Rooted trees can be drawn in ASCII or using matplotlib (see Figure 1), and the Graphviz library can be used to create unrooted layouts (see Figure 2). === Genome diagrams === The GenomeDiagram module provides methods of visualising sequences within Biopython. Sequences can be drawn in a linear or circular form (see Figure 3), and many output formats are supported, including PDF and PNG. Diagrams are created by making tracks and then adding sequence features to those tracks. By looping over a sequence's features and using their attributes to decide if and how they are added to the diagram's tracks, one can exercise much control over the appearance of the final diagram. Cross-links can be drawn between different tracks, allowing one to compare multiple sequences in a single diagram. === Macromolecular structure === The Bio.PDB module can load molecular structures from PDB and mmCIF files, and was added to Biopython in 2003. The Structure object is central to this module, and it organises macromolecular structure in a hierarchical fashion: Structure objects contain Model objects which contain Chain objects which contain Residue objects which contain Atom objects. Disordered residues and atoms get their own classes, DisorderedResidue and DisorderedAtom, that describe their uncertain positions. Using Bio.PDB, one can navigate through individual components of a macromolecular structure file, such as examining each atom in a protein. Common analyses can be carried out, such as measuring distances or angles, comparing residues and calculating residue depth. === Population genetics === The Bio.PopGen module adds support to Biopython for Genepop, a software package for statistical analysis of population genetics. This allows for analyses of Hardy–Weinberg equilibrium, linkage disequilibrium and other features of a population's allele frequencies. This module can also carry out population genetic simulations using coalescent theory with the fastsimcoal2 program. === Wrappers for command line tools === Biopython previously included command-line wrappers for tools such as BLAST, Clustal, EMBOSS, and SAMtools. This option allowed users to run external tool commands from within the code using specialized Biopython classes. However, Bio.Application modules and their wrappers have deprecated and will be removed in future Biopython releases. The main reason for this is the high maintenance burden of updating them with the evolving external tools. The recommended approach is to directly construct and execute command-line tool commands using Python’s built-in subprocess module. This method provides flexibility and removes the dependency on the Biopython wrappers. subprocess is a native Python module useful for running ext

  Read more →
• 

  Information gain ratio

  In decision tree learning, information gain ratio is a ratio of information gain to the intrinsic information. It was proposed by Ross Quinlan, to reduce a bias towards multi-valued attributes by taking the number and size of branches into account when choosing an attribute. Information gain is also known as mutual information. == Information gain calculation == Information gain is the reduction in entropy produced from partitioning a set with attributes a {\displaystyle a} and finding the optimal candidate that produces the highest value: IG ( T , a ) = H ( T ) − H ( T | a ) , {\displaystyle {\text{IG}}(T,a)=\mathrm {H} {(T)}-\mathrm {H} {(T|a)},} where T {\displaystyle T} is a random variable and H ( T | a ) {\displaystyle \mathrm {H} {(T|a)}} is the entropy of T {\displaystyle T} given the value of attribute a {\displaystyle a} . The information gain is equal to the total entropy for an attribute if for each of the attribute values a unique classification can be made for the result attribute. In this case the relative entropies subtracted from the total entropy are 0. == Split information calculation == The split information value for a test is defined as follows: SplitInformation ( X ) = − ∑ i = 1 n N ( x i ) N ( x ) ∗ log ⁡ 2 N ( x i ) N ( x ) {\displaystyle {\text{SplitInformation}}(X)=-\sum _{i=1}^{n}{{\frac {\mathrm {N} (x_{i})}{\mathrm {N} (x)}}\log {_{2}}{\frac {\mathrm {N} (x_{i})}{\mathrm {N} (x)}}}} where X {\displaystyle X} is a discrete random variable with possible values x 1 , x 2 , . . . , x i {\displaystyle {x_{1},x_{2},...,x_{i}}} and N ( x i ) {\displaystyle N(x_{i})} being the number of times that x i {\displaystyle x_{i}} occurs divided by the total count of events N ( x ) {\displaystyle N(x)} where x {\displaystyle x} is the set of events. The split information value is a positive number that describes the potential worth of splitting a branch from a node. This in turn is the intrinsic value that the random variable possesses and will be used to remove the bias in the information gain ratio calculation. == Information gain ratio calculation == The information gain ratio is the ratio between the information gain and the split information value: IGR ( T , a ) = IG ( T , a ) / SplitInformation ( T ) {\displaystyle {\text{IGR}}(T,a)={\text{IG}}(T,a)/{\text{SplitInformation}}(T)} IGR ( T , a ) = − ∑ i = 1 n P ( T ) log ⁡ P ( T ) − ( − ∑ i = 1 n P ( T | a ) log ⁡ P ( T | a ) ) − ∑ i = 1 n N ( t i ) N ( t ) ∗ log ⁡ 2 N ( t i ) N ( t ) {\displaystyle {\text{IGR}}(T,a)={\frac {-\sum _{i=1}^{n}{\mathrm {P} (T)\log \mathrm {P} (T)}-(-\sum _{i=1}^{n}{\mathrm {P} (T|a)\log \mathrm {P} (T|a)})}{-\sum _{i=1}^{n}{{\frac {\mathrm {N} (t_{i})}{\mathrm {N} (t)}}\log {_{2}}{\frac {\mathrm {N} (t_{i})}{\mathrm {N} (t)}}}}}} == Example == Using weather data published by Fordham University, the table was created below: Using the table above, one can find the entropy, information gain, split information, and information gain ratio for each variable (outlook, temperature, humidity, and wind). These calculations are shown in the tables below: Using the above tables, one can deduce that Outlook has the highest information gain ratio. Next, one must find the statistics for the sub-groups of the Outlook variable (sunny, overcast, and rainy), for this example one will only build the sunny branch (as shown in the table below): One can find the following statistics for the other variables (temperature, humidity, and wind) to see which have the greatest effect on the sunny element of the outlook variable: Humidity was found to have the highest information gain ratio. One will repeat the same steps as before and find the statistics for the events of the Humidity variable (high and normal): Since the play values are either all "No" or "Yes", the information gain ratio value will be equal to 1. Also, now that one has reached the end of the variable chain with Wind being the last variable left, they can build an entire root to leaf node branch line of a decision tree. Once finished with reaching this leaf node, one would follow the same procedure for the rest of the elements that have yet to be split in the decision tree. This set of data was relatively small, however, if a larger set was used, the advantages of using the information gain ratio as the splitting factor of a decision tree can be seen more. == Advantages == Information gain ratio biases the decision tree against considering attributes with a large number of distinct values. For example, suppose that we are building a decision tree for some data describing a business's customers. Information gain ratio is used to decide which of the attributes are the most relevant. These will be tested near the root of the tree. One of the input attributes might be the customer's telephone number. This attribute has a high information gain, because it uniquely identifies each customer. Due to its high amount of distinct values, this will not be chosen to be tested near the root. == Disadvantages == Although information gain ratio solves the key problem of information gain, it creates another problem. If one is considering an amount of attributes that have a high number of distinct values, these will never be above one that has a lower number of distinct values. == Difference from information gain == Information gain's shortcoming is created by not providing a numerical difference between attributes with high distinct values from those that have less. Example: Suppose that we are building a decision tree for some data describing a business's customers. Information gain is often used to decide which of the attributes are the most relevant, so they can be tested near the root of the tree. One of the input attributes might be the customer's credit card number. This attribute has a high information gain, because it uniquely identifies each customer, but we do not want to include it in the decision tree: deciding how to treat a customer based on their credit card number is unlikely to generalize to customers we haven't seen before. Information gain ratio's strength is that it has a bias towards the attributes with the lower number of distinct values. Below is a table describing the differences of information gain and information gain ratio when put in certain scenarios.

  Read more →
• 

  Generalized multidimensional scaling

  Generalized multidimensional scaling (GMDS) is an extension of metric multidimensional scaling, in which the target space is non-Euclidean. When the dissimilarities are distances on a surface and the target space is another surface, GMDS allows finding the minimum-distortion embedding of one surface into another. GMDS is an emerging research direction. Currently, main applications are recognition of deformable objects (e.g. for three-dimensional face recognition) and texture mapping.

  Read more →