AI Generator Website

AI Generator Website — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Environmental impact of AI

The environmental impact of the design, training, deployment and use of artificial intelligence includes the greenhouse gas emissions from generating electricity for data centres and computing hardware, operational and upstream water use, and material impacts from hardware manufacturing, mining and electronic waste. Estimating AI's environmental effects can be difficult because results depend on how impacts are measured, including whether accounting includes only model computation or also data-centre overhead, idle capacity, hardware manufacture, and local electricity supply. As these issues have received greater attention, governments and regulators have increasingly considered data-centre reporting requirements, energy-efficiency standards, and broader transparency measures for AI-related resource use. == Carbon footprint and energy use == AI-related energy use arises at multiple stages, including model training, fine-tuning, inference, storage, networking, and supporting infrastructure such as cooling and power conversion. === Individual level === Published estimates of energy use per AI request vary widely across models, tasks and measurement methods. A benchmark study presented at the 2024 ACM Conference on Fairness, Accountability, and Transparency found substantial differences between task types, with lower energy use for some text tasks and much higher energy use for image generation in the study's test conditions. In that benchmark, simple classification tasks consumed about 0.002–0.007 Wh per prompt on average (about 9% of a smartphone charge for 1,000 prompts), while text generation and text summarisation each used about 0.05 Wh per prompt; image generation averaged 2.91 Wh per prompt, and the least efficient image model in the study used 11.49 Wh per image (roughly equivalent to half a smartphone charge). First-party measurements in production environments have also been published. A 2025 Google study on Gemini assistant serving reported median per-prompt energy, emissions, and water-use estimates under the authors' accounting framework, while noting that different system boundaries can produce substantially different results. The study reported a median text-prompt estimate of about 0.24 Wh, which is roughly as much energy as watching nine seconds of television. The study also stated that software and infrastructure improvements reduced energy use by a factor of 33 and carbon emissions by a factor of 44 for a typical prompt over one year within the authors' framework. Researchers at the University of Michigan measured the energy consumption of various Meta Llama 3.1 models released in 2024 and found that smaller language models (8 billion parameters) use about 114 joules (0.03167 Wh) per response, while larger models (405 billion parameters) require up to 6,700 joules (1.861 Wh) per response. This corresponds to the energy needed to run a microwave oven for roughly one-tenth of a second and eight seconds, respectively. Comparisons between AI systems and human labour for specific tasks have produced mixed results and remain sensitive to assumptions about output quality, workload and system boundaries. A 2024 study in Scientific Reports reported 130 to 2900 times lower estimated carbon emissions for selected AI systems than for human writers and illustrators under its assumptions. A later Scientific Reports paper reported a counterexample for programming tasks under its assumptions, finding 5 to 19 times higher estimated emissions for the evaluated AI system than for human programmers on the benchmark used in that study. === System level === ==== Energy use and efficiency ==== AI electricity intensity depends not only on model architecture but also on hardware and facility efficiency. Data-centre operators commonly report Power usage effectiveness (PUE), which measures the ratio of total facility energy to IT equipment energy; a lower PUE indicates less overhead energy for cooling and other supporting infrastructure. Operators may also publish metrics and case studies on hardware efficiency, cooling systems and power sourcing. In its 2024 environmental report, Google stated that its 2023 total greenhouse gas emissions increased 13% year over year, primarily because of increased data-centre energy consumption and supply-chain emissions, while also reporting lower PUE than industry averages for its own facilities. The International Energy Agency has also reported that data centres remain a relatively small share of global electricity use overall, but that their local effects can be much more pronounced because demand is geographically concentrated. ==== Carbon footprint ==== At system level, AI contributes to rising electricity demand in data centres and related infrastructure. The International Energy Agency estimated that data centres used about 415 TWh of electricity in 2024, or around 1.5% of global electricity consumption, and projected that data-centre electricity use could rise to about 945 TWh by 2030, with AI identified as the main driver of that growth alongside other digital services. The carbon footprint of AI systems depends strongly on electricity sources, hardware efficiency, utilisation rates, and what stages are included in the accounting. Training large models can require substantial electricity, while total lifecycle impacts also depend on deployment scale and the amount of inference performed after training. Early analyses of frontier-model development reported rapid historical growth in training compute for selected systems, although later trends have depended on changes in model design, hardware and efficiency gains. Accounting methods that include upstream or embodied impacts, such as hardware manufacture and facilities construction, can materially affect estimates of AI-related emissions. === Decisions and strategies by individual companies === Large technology companies have reported that the expansion of AI and cloud infrastructure affects their sustainability targets, electricity demand, and resource use. Google, for example, attributed part of its emissions growth in 2023 to increased data-centre energy consumption and supply-chain emissions in its 2024 environmental report. Cloud and AI companies have also announced measures intended to reduce environmental impacts, including investment in more efficient hardware, low-carbon electricity procurement, alternative cooling systems, and water stewardship programmes. The extent, comparability, and third-party verification of such disclosures vary between firms and jurisdictions. == Water usage == Data centres can use water directly for cooling and indirectly through the water used in electricity generation, depending on the local energy mix. Public reporting on data-centre water use has often been inconsistent, making comparisons between operators and regions difficult. To standardise operational reporting, The Green Grid proposed the metric water usage effectiveness (WUE), defined as annual site water use divided by IT equipment energy use. WUE does not by itself measure local water stress, source sustainability, or all upstream water impacts. Studies of AI water use also distinguish between water withdrawal and water consumption. Research on AI-specific water use has argued that the water footprint of AI systems can be difficult to observe and may vary substantially by location, cooling design, and electricity source. A 2025 Communications of the ACM article summarised methods for estimating AI water footprints and emphasised the distinction between water withdrawal and water consumption. Li and colleagues estimated that global AI water withdrawal could reach 4.2–6.6 billion cubic metres in 2027 under the scenarios examined in their article. Using GPT-3, released by OpenAI in 2020, as an example, they estimated that training the model in Microsoft's U.S. data centres could consume about 700,000 litres of onsite water and about 5.4 million litres in total when offsite electricity-related water use was included; they also estimated that 10–50 medium-length GPT-3 responses could consume about 500 mL of water, depending on when and where the model was deployed. Published prompt-level estimates have also varied by system and accounting framework: the 2025 Google study on Gemini assistant serving reported a median text-prompt estimate of about 0.26 mL under its framework. Location can materially affect the significance of data-centre water use. Research on U.S. data centres found that one-fifth of servers' direct water footprint came from moderately to highly water-stressed watersheds, while nearly half of servers were fully or partially powered by plants located in water-stressed regions. A 2025 Reuters report, citing data from Verisk Maplecroft and NatureFinance, said that an average mid-sized data centre uses about 1.4 million litres of water per day for cooling and that Phoenix would experience a 32% increase in annual water stress if currently pl
Read more →
Comparison of color models in computer graphics

This article provides introductory information about the RGB, HSV, and HSL color models from a computer graphics (web pages, images) perspective. An introduction to colors is also provided to support the main discussion. == Basics of color == === Primary colors and hue === First, "color" refers to the human brain's subjective interpretation of combinations of a narrow band of wavelengths of light. For this reason, the definition of "color" is not based on a strict set of physical phenomena. Therefore, even basic concepts like "primary colors" are not clearly defined. For example, traditional "Painter's Colors" use red, blue, and yellow as the primary colors, "Printer's Colors" use cyan, yellow, and magenta, and "Light Colors" use red, green, and blue. "Light colors", more formally known as additive colors, are formed by combining red, green, and blue light. This article refers to additive colors and refers to red, green, and blue as the primary colors. Hue is a term describing a pure color, that is, a color not modified by tinting or shading (see below). In additive colors, hues are formed by combining two primary colors. When two primary colors are combined in equal intensities, the result is a "secondary color". === Color wheel === A color wheel is a tool that provides a visual representation of the relationships between all possible hues. The primary colors are arranged around a circle at equal (120 degree) intervals. (Warning: Color wheels frequently depict "Painter's Colors" primary colors, which leads to a different set of hues than additive colors.) The illustration shows a simple color wheel based on the additive colors. Note that the position (top, right) of the starting color, typically red, is arbitrary, as is the order of green and blue (clockwise, counter-clockwise). The illustration also shows the secondary colors, yellow, cyan, and magenta, located halfway between (60 degrees) the primary colors. == Complementary color == The complement of a hue is the hue that is opposite it (180 degrees) on the color wheel. Using additive colors, mixing a hue and its complement in equal amounts produces white. === Tints and shades === The following discussion uses an illustration involving three projectors pointing to the same spot on a screen. Each projector is capable of generating one hue. The "intensities" of each projector are "matched" and can be equally adjusted from zero to full. (Note: "Intensity" is used here in the same sense as the RGB color model. The subject of matching, or "gamma correction", is beyond the level of this article.) A shade is produced by "dimming" a maximum chroma color. Painters refer to this as "adding black". In our illustration, one projector is set to full intensity, a second is set to some intensity between zero and full, and third is set to zero. "Dimming" is accomplished by decreasing each projector's intensity setting to the same fraction of its start setting. In the shade example, with any fully shaded hue, that all three projectors are set to zero intensity, resulting in black. A tint is produced by "lightening" a maximum chroma color. Painters refer to this as "adding white". In our illustration, one projector is set to full intensity, a second is set to some intensity between zero and full, and third is set to zero. "Lightening" is accomplished by increasing each projector's intensity setting by the same fraction from its start setting to full. In the tinting example, note that the third projector is now contributing. When the hue is fully lightened, all three projectors are each at full intensity, and the result is white. Note an attribute of the total intensity in the additive model. If full intensity for one projector is 1, then a primary color has a combined intensity of 1. A secondary color has a total intensity of 2. White has a total intensity of 3. Tinting, or "adding white", increases the total intensity of the hue. While this is simply a fact, the HSL model will take this fact into account in its design. === Tones === Tone is a general term, typically used by painters, to refer to the effects of reducing the "colorfulness" of a maximum chroma color; painters refer to it as "adding gray". Note that gray is not a color or even a single concept but refers to all the range of values between black and white where all three primary colors are equally represented. The general term is provided as more specific terms have conflicting definitions in different color models. Thus, shading takes a hue toward black, tinting takes a hue towards white, and tones cover the range between. == Choosing a color model == No one color model is necessarily "better" than another. Typically, the choice of a color model is dictated by external factors, such as a graphics tool or the need to specify colors according to the CSS2 or CSS3 standard. The following discussion only describes how the models function, centered on the concepts of hue, shade, tint, and tone. === RGB === The RGB model's approach to colors is important because: It directly reflects the physical properties of "Truecolor" displays As of 2011, most graphic cards define pixel values in terms of the colors red, green, and blue. The typical range of intensity values for each color, 0–255, is based on taking a binary number with 32 bits and breaking it up into four bytes of 8 bits each. 8 bits can hold a value from 0 to 255. The fourth byte is used to specify the "alpha", or the opacity, of the color. Opacity comes into play when layers with different colors are stacked. If the color in the top layer is less than fully opaque (alpha < 255), the color from underlying layers "shows through". In the RGB model, hues are represented by specifying one color as full intensity (255), a second color with a variable intensity, and the third color with no intensity (0). The following provides some examples using red as the full-intensity and green as the partial-intensity colors; blue is always zero: Shades are created by multiplying the intensity of each primary color by 1 minus the shade factor, in the range 0 to 1. A shade factor of 0 does nothing to the hue, a shade factor of 1 produces black: new intensity = current intensity (1 – shade factor) The following provides examples using orange: Tints are created by modifying each primary color as follows: the intensity is increased so that the difference between the intensity and full intensity (255) is decreased by the tint factor, in the range 0 to 1. A tint factor of 0 does nothing, a tint factor of 1 produces white: new intensity = current intensity + (255 – current intensity) tint factor The following provides examples using orange: Tones are created by applying both a shade and a tint. The order in which the two operations are performed does not matter, with the following restriction: when a tint operation is performed on a shade, the intensity of the dominant color becomes the "full intensity"; that is, the intensity value of the dominant color must be used in place of 255. The following provides examples using orange: === HSV === The HSV, or HSB, model describes colors in terms of hue, saturation, and value (brightness). Note that the range of values for each attribute is arbitrarily defined by various tools or standards. Be sure to determine the value ranges before attempting to interpret a value. Hue corresponds directly to the concept of hue in the Color Basics section. The advantages of using hue are The angular relationship between tones around the color circle is easily identified Shades, tints, and tones can be generated easily without affecting the hue Saturation corresponds directly to the concept of tint in the Color Basics section, except that full saturation produces no tint, while zero saturation produces white, a shade of gray, or black. Value corresponds directly to the concept of intensity in the Color Basics section. Pure colors are produced by specifying a hue with full saturation and value Shades are produced by specifying a hue with full saturation and less than full value Tints are produced by specifying a hue with less than full saturation and full value Tones are produced by specifying a hue and both less than full saturation and value White is produced by specifying zero saturation and full value, regardless of hue Black is produced by specifying zero value, regardless of hue or saturation Shades of gray are produced by specifying zero saturation and between zero and full value The advantage of HSV is that each of its attributes corresponds directly to the basic color concepts, which makes it conceptually simple. The perceived disadvantage of HSV is that the saturation attribute corresponds to tinting, so desaturated colors have increasing total intensity. For this reason, the CSS3 standard plans to support RGB and HSL but not HSV. === HSL === The HSL model describes colors in terms of hue, saturation, and lightness (also called luminance). (Note: the definition of sa
Read more →
Key–value database

A key-value database, or key-value store, is a data storage paradigm designed for storing, retrieving, and managing associative arrays, a data structure more commonly known today as a dictionary. Dictionaries contain a collection of objects, or records, which in turn have many different fields within them. These records are stored and retrieved using a key that uniquely identifies the record, and is used to find the data within the database. Key-value databases differ from the better known relational databases (RDB). RDBs pre-define the data structure in the database as a series of tables containing fields with well-defined data types. Exposing the data types to the database program allows it to apply various optimizations. In contrast, key-value systems treat the value as opaque to the database itself, and typically support only simple operations such as storing, retrieving, updating, and deleting a value by its key. This offers considerable flexibility and makes such systems well suited to low-latency, high-throughput workloads dominated by direct key lookups, but less suitable for applications that require complex queries or explicit relationships among records. A lack of standardization, limited transaction support, and relatively simple query interfaces long restricted many key-value systems to specialized uses, but the rapid move to cloud computing after 2010 helped drive renewed interest in them as part of the broader NoSQL movement. Some graph databases, such as ArangoDB, are also key–value databases internally, adding the concept of relationships (pointers) between records as a first-class data type. == Types and examples == Key–value systems span a wide consistency spectrum, from eventually consistent designs to strongly consistent or serializable ones, and some allow the consistency level to be configured as part of the trade-off against latency and availability. Renewed interest in key–value and other NoSQL systems was driven in part by the demands of big data, distributed, and cloud applications. Their scalability and availability made them attractive for cloud data management, although limited transaction support, low-level query interfaces, and the lack of standardization remained obstacles to wider adoption. Some maintain data in memory (RAM), while others employ solid-state drives or rotating disks. Some key–value systems add additional structure to their keys. For example, Oracle NoSQL Database organizes records using composite keys with "major" and "minor" components, an arrangement that Oracle compares to a directory-path structure in a file system. More generally, however, key–value stores are defined by their use of unique keys associated with opaque values and by their emphasis on simple key-based operations. Unix included dbm (database manager), a minimal database library written by Ken Thompson for managing associative arrays with a single key and hash-based access. Later implementations and related libraries included sdbm, GNU dbm (gdbm), and Berkeley DB. A more recent example is RocksDB, a persistent key–value storage engine developed at Facebook and designed for large-scale applications. Other examples include in-memory systems such as Memcached and Redis, and persistent systems such as Berkeley DB, Riak, and Voldemort.
Read more →
Capture the flag (cybersecurity)

In computer security, Capture the Flag (CTF) is an exercise in which participants attempt to find text strings, called "flags", which are secretly hidden in purposefully vulnerable programs or websites. They can be used for both competitive or educational purposes. In two main variations of CTFs, participants either steal flags from other participants (attack/defense-style CTFs) or from organizers (jeopardy-style challenges). A mixed competition combines these two styles. Competitions can include hiding flags in hardware devices, they can be both online or in-person, and can be advanced or entry-level. The game is inspired by the traditional outdoor sport with the same name. CTFs are used as a tool for developing and refining cybersecurity skills, making them popular in both professional and academic settings. == Overview == Capture the Flag (CTF) is a cybersecurity competition that is used to test and develop computer security skills. It was first developed in 1996 at DEF CON, the largest cybersecurity conference in the United States which is hosted annually in Las Vegas, Nevada. The conference hosts a weekend of cybersecurity competitions, including their flagship CTF. Two popular CTF formats are jeopardy and attack-defense. Both formats test participant’s knowledge in cybersecurity, but differ in objective. In the Jeopardy format, participating teams must complete as many challenges of varying point values from a various categories such as cryptography, web exploitation, and reverse engineering. In the attack-defense format, competing teams must defend their vulnerable computer systems while attacking their opponent's systems. The exercise involves a diverse array of tasks, including exploitation and cracking passwords, but there is little evidence showing how these tasks translate into cybersecurity knowledge held by security experts. Recent research has shown that the Capture the Flag tasks mainly covered technical knowledge but lacked social topics like social engineering and awareness on cybersecurity. == Educational applications == CTFs have been shown to be an effective way to improve cybersecurity education through gamification. There are many examples of CTFs designed to teach cybersecurity skills to a wide variety of audiences, including PicoCTF, organized by the Carnegie Mellon CyLab, which is oriented towards high school students, and Arizona State University supported pwn.college. Beyond educational CTF events and resources, CTFs has been shown to be a highly effective way to instill cybersecurity concepts in the classroom. CTFs have been included in undergraduate computer science classes such as Introduction to Information Security at the National University of Singapore. CTFs are also popular in military academies. They are often included as part of the curriculum for cybersecurity courses, with the NSA organized Cyber Exercise culminating in a CTF competition between the US service academies and military colleges. == Competitions == Many CTF organizers register their competition with the CTFtime platform. This allows the tracking of the position of teams over time and across competitions. These include "Plaid Parliament of Pwning", "More Smoked Leet Chicken", "Dragon Sector", "dcua", "Eat, Sleep, Pwn, Repeat", "perfect blue", "organizers" and "Blue Water". Overall the "Plaid Parliament of Pwning" and "Dragon Sector" have both placed first worldwide the most with three times each. === Community competitions === Every year there are dozens of CTFs organized in a variety of formats. Many CTFs are associated with cybersecurity conferences such as DEF CON, various editions of SANS Institute's NetWars, HITCON, and BSides. The DEF CON CTF, an attack-defence CTF, is notable for being one of the oldest CTF competitions to exist, and has been variously referred to as the "World Series", "Superbowl", and "Olympics", of hacking by media outlets. The NYU Tandon hosted Cybersecurity Awareness Worldwide (CSAW) CTF is one of the largest open-entry competitions for students learning cybersecurity from around the world. In 2021, it hosted over 1200 teams during the qualification round. In addition to conference organized CTFs, many CTF clubs and teams organize CTF competitions. Many CTF clubs and teams are associated with universities, such as the CMU associated Plaid Parliament of Pwning, which hosts PlaidCTF, and the ASU associated Shellphish. Some community CTFs are online and open to all participants. The SANS Institute Holiday Hack Challenge and TryHackMe Advent of Cyber. === Government-supported competitions === Governmentally supported CTF competitions include the DARPA Cyber Grand Challenge and ENISA European Cybersecurity Challenge. In 2023, the US Space Force-sponsored Hack-a-Sat CTF competition included, for the first time, a live orbital satellite for participants to exploit. === Corporate-supported competitions === Corporations and other organizations sometimes use CTFs as a training or evaluation exercise, with benefits similar to those in educational settings. In addition to internal CTF exercises, some corporations such as Google and Tencent host publicly accessible CTF competitions. == In popular culture == In Mr. Robot, a qualification round for the DEF CON CTF competition is depicted in the season 3 opener "eps3.0_power-saver-mode.h". The logo for DEF CON can be seen in the background. In The Undeclared War, a CTF is depicted in the opening scene of the series as a recruitment exercise used by GCHQ. Go Go Squid!, a Chinese television series, is based around training for and competing in highly stylized CTF competitions .
Read more →
Superintelligence ban

Superintelligence ban refers to proposed legal, ethical, or policy measures intended to restrict or prohibit the development of artificial superintelligence, AI systems that would surpass human cognitive abilities in nearly all domains. The idea arises from concerns that such systems could become uncontrollable, potentially posing existential threats to humanity or causing severe social and economic disruption. == Background == The concept of limiting or banning superintelligence research has roots in early 21st-century debates on artificial general intelligence (AGI) safety. Thinkers such as Nick Bostrom and Eliezer Yudkowsky warned that self-improving AI could rapidly exceed human oversight. As advanced models like large-scale language models and autonomous agents began demonstrating complex reasoning abilities, policymakers and ethicists increasingly discussed the need for legal constraints on the creation of systems capable of recursive self-improvement. In October 2025, the Future of Life Institute published a statement calling for "a prohibition on the development of superintelligence, not lifted before there is broad scientific consensus that it will be done safely and controllably, and strong public buy-in." This statement was signed by various public personalities, such as Richard Branson and Steve Wozniak, and AI experts, such as Yoshua Bengio and Geoffrey Hinton. == Rationale == Supporters of a superintelligence ban argue that once AI systems surpass human intelligence, traditional containment, alignment, and control methods may fail. They contend that even limited experimentation with such systems could lead to irreversible outcomes, including loss of human decision-making power or unintended global harm. Some propose international treaties modeled after the nuclear non-proliferation framework to prevent a competitive AI arms race. Opponents argue that a ban would be difficult to define and enforce, given the lack of a precise threshold distinguishing advanced AGI from superintelligence. They also warn that excessive restriction could slow scientific progress, hinder beneficial automation, and encourage unregulated underground research. == Global discussion == Although no government has enacted an explicit superintelligence ban, the idea has been debated within the European Union, United Nations, and several independent AI safety organizations. The Future of Life Institute, Center for AI Safety, and other organizations have called for international cooperation to manage risks associated with the pursuit of superintelligent systems. In 2024 and 2025, proposals for a temporary moratorium on frontier AI research were circulated among major technology firms and research institutes, reflecting growing public concern over the trajectory of AI capabilities.
Read more →
CityEngine

ArcGIS CityEngine is a commercial 3D modeling program. Developed by Esri R&D Center Zurich (formerly Procedural Inc.), it specializes in the generation of 3D urban environments to support the creation of detailed large-scale 3D city models. Unlike traditional 3D modeling methodology, which uses computer-aided design (CAD) tools and techniques, CityEngine takes a procedural modeling approach which shapes generation via a rules-based system. Due to its integration with the wider ArcGIS platform, CityEngine can also be used with geographic information system (GIS) datasets. CityEngine can be used for urban planning and architecture, graphics visualization, game development, entertainment, and archeology. CityEngine can be used to visualize the building information modeling (BIM) data of buildings in a larger urban context, making for more realistic construction projects. == History and releases == === Software history === ArcGIS CityEngine, originally named Esri CityEngine, was developed at Swiss technology university ETH Zurich by Pascal Mueller, the co-founder and CEO of Procedural Inc. While researching for his PhD at the ETH Computer Vision Lab, Mueller invented a number of techniques for procedural modeling of 3D architecture that make up the foundation of CityEngine. CityEngine publically debuted at the 2001 SIGGRAPH conference; since then, additional research papers have been published that have contributed to CityEngine and its features. The first commercial version of CityEngine was released in 2008. In 2007, Procedural Inc. was founded and separated from ETH Zurich, the top-ranking technology university in Switzerland. In the summer of 2011, Procedural Inc. was acquired by Esri Inc., becoming Esri R&D Center Zurich. Esri CityEngine was renamed to ArcGIS CityEngine in June 2020 to offically make it a part of the ArcGIS software suite. === Releases === === Licensing and pricing === ArcGIS CityEngine is included in the Professional and Professional Plus tiers of ArcGIS Online. Pricing may vary by region and distributors. In the US, the professional tier costs US$2,200 per year; in the UK, it is £4,200 per year (excluding VAT). CityEngine can be purchased elsewhere via a local Esri partner. . Once purchased, users can download and obtain license details from the MyEsri portal. == Features == CGA (computer generated architecture) parametric modeling rules to control mass, geometry assets, proportions, or texturing of buildings or streets on a citywide scale Select a target location and import geo-referenced satellite imagery and 3D terrain of the location to more quickly build accurate urban environments through OpenStreetMap integration Interactively control specific street or building parameters, such as height or age Import/export geo-spatial/vector data with industry-standard formats such as Esri Shapefile, File Geodatabase, and OpenStreetMap, as well as file formats for WebGL, KMZ, Collada, Autodesk FBX, Autodesk Maya, 3DS, Wavefront OBJ, RenderMan RIB, Alembic, e-on software's Vue, Universal Scene Description USD, Khronos Group GLTF, Unreal Engine, and Unreal Datasmith Script and generate rules-based reports to show socioeconomic figures (e.g., Gross Floor Area (GFA) and Floor Area Ratio (FAR)) to analyze their urban design proposals. VR viewing of modeled environments with Samsung Gear VR Use a variety of materials through the Esri materials library == Procedural modeling == ArcGIS CityEngine uses a procedural modeling approach to automatically generate models through a predefined rule set. The rules are defined through a CGA shape grammar system, enabling the creation of complex parametric models. Users can change or add the shape grammar as needed. Urban environments can be modeled within CityEngine by starting with creating a street network (either from the street drawing tool or with data imported from map data). Then, lots may be subdivided as many times as specified, resulting in a map of multiple lots and streets. CityEngine can then be instructed to start generating the buildings using defined procedural modeling rules. At this point, the city model can be re-designed and adjusted by changing the parameters or the shape grammar. === Geodesign === Though CityEngine is not an analytical tool like GIS, discussions about geodesign often mention the use of ArcGIS CityEngine. As it can be used to enhance 3D shape generation in ArcGIS, ArcGIS CityEngine is a critical product to improve the applicability of geodesign by using geospatial information to design or analyze a city. == Applications == === Urban design and planning === Garsdale Design used ArcGIS CityEngine in the creation of city master plans in Iraq before 2013, both to model existing historic areas and also model future plans. Larger companies like Foster+Partners and HOK Architects have also used CityEngine in their urban planning projects. === Urban and environmental studies === Because its primary feature is building informative city models, some urban researchers use CityEngine to compare land-use planning schemes, for example in very dense global cities such as Hong Kong and Seoul. Environmental scientists can also utilize the instant 3D model generation in CityEngine, which can make for more convenient informative research than modeling a city by creating each building individually. === Game development === CityEngine can be used as a tool in the creation of video games that require detailed 3D environments to assign interactive scripts. === Movie industry === Zootopia (also known outside of the US as Zootopolis), which won the 2016 Academy Award for Best Animated Feature Film, used CityEngine to model the city in its movie. multi-scaling city, the designers used CityEngine due to its rule-based system. CityEngine was also used to create Big Hero 6's San-Fransokyo. === Military === Due to its integration with the Esri product suite and its ability to process geospatial data to create 3D scenes/maps, CityEngine can be used within military/defense organizations. == List of movies and TV shows using CityEngine == Studios and companies rarely state what software they use in their pipelines. When CityEngine is mentioned as a tool in production, it's often in a small reference in a larger article. Movies only claimed to use CityEngine by a single Esri employee Presented at FMX 2025 workshop == Ports == ArcGIS CityEngine is built on top of Eclipse IDE, and has therefore able to be used on Windows and Linux operating systems. Support for macOS was stopped in March 2021. == Plugins and extensions == ArcGIS CityEngine currently works with a number of third party 3D modeling, rendering, and analytical software products via its SDK and API; these currently are: ArcGIS CityEngine for ArcGIS Urban: ArcGIS Urban Suite Puma: ArcGIS CityEngine for Rhinoceros 3D Palladio: ArcGIS CityEngine for Houdini Serlio: ArcGIS CityEngine for Maya PyPRT: ArcGIS CityEngine for Python ArcGIS CityEngine provides a Python scripting interface built on Jython (current version 2.7.0) which allows users to create their own tools and functionality. == Publications ==
Read more →
Ray tracing (graphics)

In 3D computer graphics, ray tracing is a technique for modeling light transport for use in a wide variety of rendering algorithms for generating digital images. On a spectrum of computational cost and visual fidelity, ray tracing-based rendering techniques, such as ray casting, recursive ray tracing, distribution ray tracing, photon mapping and path tracing, are generally slower and higher fidelity than scanline rendering methods. Thus, ray tracing was first deployed in applications where taking a relatively long time to render could be tolerated, such as still CGI images, and film and television visual effects (VFX), but was less suited to real-time applications such as video games, where speed is critical in rendering each frame. Since 2018, however, hardware acceleration for real-time ray tracing has become standard on new commercial graphics cards, and graphics APIs have followed suit, allowing developers to use hybrid ray tracing and rasterization-based rendering in games and other real-time applications with a lesser hit to frame render times. Ray tracing is capable of simulating a variety of optical effects, such as reflection, refraction, soft shadows, scattering, depth of field, motion blur, caustics, ambient occlusion and dispersion phenomena (such as chromatic aberration). It can also be used to trace the path of sound waves in a similar fashion to light waves, making it a viable option for more immersive sound design in video games by rendering realistic reverberation and echoes. In fact, any physical wave or particle phenomenon with approximately linear motion can be simulated with ray tracing. Ray tracing–based rendering techniques that sample light over a domain typically generate multiple rays and often rely on denoising to reduce the resulting noise. == History == The idea of ray tracing comes from as early as the 16th century, when it was described by Albrecht Dürer, who is credited for its invention. Dürer described multiple techniques for projecting 3-D scenes onto an image plane. Some of these project chosen geometry onto the image plane, as is done with rasterization today. Others determine what geometry is visible along a given ray, as is done with ray tracing. Using a computer for ray tracing to generate shaded pictures was first accomplished by Arthur Appel in 1968. Appel used ray tracing for primary visibility (determining the closest surface to the camera at each image point) by tracing a ray through each point to be shaded into the scene to identify the visible surface. The closest surface intersected by the ray was the visible one. This non-recursive ray tracing-based rendering algorithm is today called "ray casting". His algorithm then traced secondary rays to the light source from each point being shaded to determine whether the point was in shadow or not. Later, in 1971, Goldstein and Nagel of MAGI (Mathematical Applications Group, Inc.) published "3-D Visual Simulation", wherein ray tracing was used to make shaded pictures of solids. At the ray-surface intersection point found, they computed the surface normal and, knowing the position of the light source, computed the brightness of the pixel on the screen. Their publication describes a short (30-second) film "made using the University of Maryland's display hardware outfitted with a 16mm camera. The film showed the helicopter and a simple ground-level gun emplacement. The helicopter was programmed to undergo a series of maneuvers including turns, take-offs, and landings, etc., until it eventually is shot down and crashed." A CDC 6600 computer was used. MAGI produced an animation video called MAGI/SynthaVision Sampler in 1974. Another early instance of ray casting came in 1976, when Scott Roth created a flip book animation in Bob Sproull's computer graphics course at Caltech. The scanned pages are shown as a video in the accompanying image. Roth's computer program noted an edge point at a pixel location if the ray intersected a bounded plane different from that of its neighbors. Of course, a ray could intersect multiple planes in space, but only the surface point closest to the camera was noted as visible. The platform was a DEC PDP-10, a Tektronix storage-tube display, and a printer which would create an image of the display on rolling thermal paper. Roth extended the framework, introduced the term ray casting in the context of computer graphics and solid modeling, and in 1982 published his work while at GM Research Labs. Turner Whitted was the first to show recursive ray tracing for mirror reflection and for refraction through translucent objects, with an angle determined by the solid's index of refraction, and to use ray tracing for anti-aliasing. Whitted also showed ray traced shadows. He produced a recursive ray traced film called The Compleat Angler in 1979 while an engineer at Bell Labs. Whitted's deeply recursive ray tracing algorithm reframed rendering from being primarily a matter of surface visibility determination to being a matter of light transport. His paper inspired a series of subsequent work by others that included distribution ray tracing and finally unbiased path tracing, which provides the rendering equation framework that has allowed computer-generated imagery to be faithful to reality. For decades, global illumination in major films using computer-generated imagery was approximated with additional lights. Ray tracing-based rendering eventually changed that by enabling physically based light transport. Early feature films rendered entirely using path tracing include Monster House (2006), Cloudy with a Chance of Meatballs (2009), and Monsters University (2013). == Algorithm overview == Optical ray tracing describes a method for producing visual images constructed in 3D computer graphics environments, with more photorealism than either ray casting or scanline rendering techniques. It works by tracing a path from an imaginary eye through each pixel in a virtual screen, and calculating the color of the object visible through it. Scenes in ray tracing are described mathematically by a programmer or by a visual artist (normally using intermediary tools). Scenes may also incorporate data from images and models captured by means such as digital photography. Typically, each ray must be tested for intersection with some subset of all the objects in the scene. Once the nearest object has been identified, the algorithm will estimate the incoming light at the point of intersection, examine the material properties of the object, and combine this information to calculate the final color of the pixel. Certain illumination algorithms and reflective or translucent materials may require more rays to be re-cast into the scene. It may at first seem counterintuitive or "backward" to send rays away from the camera, rather than into it (as actual light does in reality), but doing so is many orders of magnitude more efficient. Since the overwhelming majority of light rays from a given light source do not make it directly into the viewer's eye, a "forward" simulation could potentially waste a tremendous amount of computation on light paths that are never recorded. Therefore, the shortcut taken in ray tracing is to presuppose that a given ray intersects the view frame. After either a maximum number of reflections or a ray traveling a certain distance without intersection, the ray ceases to travel and the pixel's value is updated. === Calculate rays for rectangular viewport === On input we have (in calculation we use vector normalization and cross product): E ∈ R 3 {\displaystyle E\in \mathbb {R^{3}} } eye position T ∈ R 3 {\displaystyle T\in \mathbb {R^{3}} } target position θ ∈ [ 0 , π ] {\displaystyle \theta \in [0,\pi ]} field of view - for humans, we can assume ≈ π / 2 rad = 90 ∘ {\displaystyle \approx \pi /2{\text{ rad}}=90^{\circ }} m , k ∈ N {\displaystyle m,k\in \mathbb {N} } numbers of square pixels on viewport vertical and horizontal direction i , j ∈ N , 1 ≤ i ≤ k ∧ 1 ≤ j ≤ m {\displaystyle i,j\in \mathbb {N} ,1\leq i\leq k\land 1\leq j\leq m} numbers of actual pixel v → ∈ R 3 {\displaystyle {\vec {v}}\in \mathbb {R^{3}} } vertical vector which indicates where is up and down, usually v → = [ 0 , 1 , 0 ] {\displaystyle {\vec {v}}=[0,1,0]} - roll component which determine viewport rotation around point C (where the axis of rotation is the ET section) The idea is to find the position of each viewport pixel center P i j {\displaystyle P_{ij}} which allows us to find the line going from eye E {\displaystyle E} through that pixel and finally get the ray described by point E {\displaystyle E} and vector R → i j = P i j − E {\displaystyle {\vec {R}}_{ij}=P_{ij}-E} (or its normalization r → i j {\displaystyle {\vec {r}}_{ij}} ). First we need to find the coordinates of the bottom left viewport pixel P 1 m {\displaystyle P_{1m}} and find the next pixel by making a shift along directions parallel to viewport (vectors b → n {\displaystyle {\vec {b}}_{n
Read more →
Line Drawing System-1

LDS-1 (Line Drawing System-1) was a calligraphic (vector, rather than raster) display processor and display device created by Evans & Sutherland in 1969. This model was known as the first graphics device with a graphics processing unit. == Features == It was controlled by a variety of host computers. Straight lines were smoothly rendered in real-time animation. General principles of operation were similar to the systems used today: 4x4 transformation matrices, 1x4 vertices. Possible uses included flight simulation (in the product brochure there are screenshots of landing on a carrier), scientific imaging and GIS systems. == History == The first LDS-1 was shipped to the customer (BBN) in August 1969. Only a few of these systems were ever built. One was used by the Los Angeles Times as their first typesetting/layout computer. One went to NASA Ames Research Center for Human Factors Research. Another was bought by the Port Authority of New York to develop a tugboat pilot trainer for navigation in the harbor. The MIT Dynamic Modeling had one, and there was a program for viewing an ongoing game of Maze War.
Read more →
Elowan

Elowan is a plant-robot cyborg. Using its own internal bioelectrical signals, The plant has a robotic extension that makes it move towards light sources. Electrodes are inserted into the leaves, stem, and ground to detect the faint bioelectrical signals the plant produces. Then they are amplified so the robot can read them. So when the plant "wants" to go to light, the cyborg automatically goes to the nearest light source. Future extensions of the robot could provide: Protection, growth frameworks, and nutrients. Other factors that could make the cyborg move are temperature, soil, and gravity conditions Elowan is one in a series of plant-electronic hybrid experiments.
Read more →
Commitment ordering

Commitment ordering (CO) is a class of interoperable serializability techniques in concurrency control of databases, transaction processing, and related applications. It allows optimistic (non-blocking) implementations. With the proliferation of multi-core processors, CO has also been increasingly utilized in concurrent programming, transactional memory, and software transactional memory (STM) to achieve serializability optimistically. CO is also the name of the resulting transaction schedule (history) property, defined in 1988 with the name dynamic atomicity. In a CO compliant schedule, the chronological order of commitment events of transactions is compatible with the precedence order of the respective transactions. CO is a broad special case of conflict serializability and effective means (reliable, high-performance, distributed, and scalable) to achieve global serializability (modular serializability) across any collection of database systems that possibly use different concurrency control mechanisms (CO also makes each system serializability compliant, if not already). Each not-CO-compliant database system is augmented with a CO component (the commitment order coordinator—COCO) which orders the commitment events for CO compliance, with neither data-access nor any other transaction operation interference. As such, CO provides a low overhead, general solution for global serializability (and distributed serializability), instrumental for global concurrency control (and distributed concurrency control) of multi-database systems and other transactional objects, possibly highly distributed (e.g., within cloud computing, grid computing, and networks of smartphones). An atomic commitment protocol (ACP; of any type) is a fundamental part of the solution, utilized to break global cycles in the conflict (precedence, serializability) graph. CO is the most general property (a necessary condition) that guarantees global serializability, if the database systems involved do not share concurrency control information beyond atomic commitment protocol (unmodified) messages and have no knowledge of whether transactions are global or local (the database systems are autonomous). Thus CO (with its variants) is the only general technique that does not require the typically costly distribution of local concurrency control information (e.g., local precedence relations, locks, timestamps, or tickets). It generalizes the popular strong strict two-phase locking (SS2PL) property, which in conjunction with the two-phase commit protocol (2PC), is the de facto standard to achieve global serializability across (SS2PL based) database systems. As a result, CO compliant database systems (with any different concurrency control types) can transparently join such SS2PL based solutions for global serializability. In addition, locking based global deadlocks are resolved automatically in a CO based multi-database environment, a vital side-benefit (including the special case of a completely SS2PL based environment; a previously unnoticed fact for SS2PL). Furthermore, strict commitment ordering (SCO; Raz 1991c), the intersection of Strictness and CO, provides better performance (shorter average transaction completion time and resulting in better transaction throughput) than SS2PL whenever read-write conflicts are present (identical blocking behavior for write-read and write-write conflicts; comparable locking overhead). The advantage of SCO is especially during lock contention. Strictness allows both SS2PL and SCO to use the same effective database recovery mechanisms. Two major generalizing variants of CO exist, extended CO (ECO; Raz 1993a) and multi-version CO (MVCO; Raz 1993b). They also provide global serializability without local concurrency control information distribution, can be combined with any relevant concurrency control, and allow optimistic (non-blocking) implementations. Both use additional information for relaxing CO constraints and achieving better concurrency and performance. Vote ordering (VO or Generalized CO (GCO); Raz 2009) is a container schedule set (property) and technique for CO and all its variants. Local VO is necessary for guaranteeing global serializability if the atomic commitment protocol (ACP) participants do not share concurrency control information (have the generalized autonomy property). CO and its variants inter-operate transparently, guaranteeing global serializability and automatic global deadlock resolution together in a mixed, heterogeneous environment with different variants. == Overview == The Commitment ordering (CO; Raz 1990, 1992, 1994, 2009) schedule property has been referred to also as Dynamic atomicity (since 1988), commit ordering, commit order serializability, and strong recoverability (since 1991). The latter is a misleading name since CO is incomparable with recoverability, and the term "strong" implies a special case. This means that a substantial recoverability property does not necessarily have the CO property and vice versa. In 2009 CO has been characterized as a major concurrency control method, together with the previously known (since the 1980s) three major methods: Locking, Time-stamp ordering, and Serialization graph testing, and as an enabler for the interoperability of systems using different concurrency control mechanisms. In a federated database system or any other more loosely defined multidatabase system, which are typically distributed in a communication network, transactions span multiple and possibly Distributed databases. Enforcing global serializability in such system is problematic. Even if every local schedule of a single database is still serializable, the global schedule of a whole system is not necessarily serializable. The massive communication exchanges of conflict information needed between databases to reach conflict serializability would lead to unacceptable performance, primarily due to computer and communication latency. The problem of achieving global serializability effectively had been characterized as open until the public disclosure of CO in 1991 by its inventor Yoav Raz (Raz 1991a; see also Global serializability). Enforcing CO is an effective way to enforce conflict serializability globally in a distributed system since enforcing CO locally in each database (or other transactional objects) also enforces it globally. Each database may use any, possibly different, type of concurrency control mechanism. With a local mechanism that already provides conflict serializability, enforcing CO locally does not cause any other aborts, since enforcing CO locally does not affect the data access scheduling strategy of the mechanism (this scheduling determines the serializability related aborts; such a mechanism typically does not consider the commitment events or their order). The CO solution requires no communication overhead since it uses (unmodified) atomic commitment protocol messages only, already needed by each distributed transaction to reach atomicity. An atomic commitment protocol plays a central role in the distributed CO algorithm, which enforces CO globally by breaking global cycles (cycles that span two or more databases) in the global conflict graph. CO, its special cases, and its generalizations are interoperable and achieve global serializability while transparently being utilized together in a single heterogeneous distributed environment comprising objects with possibly different concurrency control mechanisms. As such, Commitment ordering, including its special cases, and together with its generalizations (see CO variants below), provides a general, high performance, fully distributed solution (no central processing component or central data structure are needed) for guaranteeing global serializability in heterogeneous environments of multidatabase systems and other multiple transactional objects (objects with states accessed and modified only by transactions; e.g., in the framework of transactional processes, and within Cloud computing and Grid computing). The CO solution scales up with network size and the number of databases without any negative impact on performance (assuming the statistics of a single distributed transaction, e.g., the average number of databases involved with a single transaction, are unchanged). With the proliferation of Multi-core processors, Optimistic CO (OCO) has also been increasingly utilized to achieve serializability in software transactional memory, and numerous STM articles and patents utilizing "commit order" have already been published (e.g., Zhang et al. 2006). == The commitment ordering solution for global serializability == === General characterization of CO === Commitment ordering (CO) is a special case of conflict serializability. CO can be enforced with non-blocking mechanisms (each transaction can complete its task without having its data-access blocked, which allows optimistic concurrency control; however, commitment could be blo
Read more →
Anomaly Detection at Multiple Scales

Anomaly Detection at Multiple Scales, or ADAMS was a $35 million DARPA project designed to identify patterns and anomalies in very large data sets. It is under DARPA's Information Innovation office and began in 2011 and ended in August 2014 The project was intended to detect and prevent insider threats such as "a soldier in good mental health becoming homicidal or suicidal", an "innocent insider becoming malicious", or "a government employee [who] abuses access privileges to share classified information". Specific cases mentioned are Nadal Malik Hasan and WikiLeaks source Chelsea Manning. Commercial applications may include finance. The intended recipients of the system output are operators in the counterintelligence agencies. A final report was published on May 11, 2015, detailing a system known as Anomaly Detection Engine for Networks, or ADEN, developed by the University of Maryland, College Park, whose goal was to "identify malicious users within a network." Using multiple datasets from Wikipedia, Slashdot, and others, researchers were able to identify vandals and malicious users on a website using both conventional algorithms and artificial intelligence. The Proactive Discovery of Insider Threats Using Graph Analysis and Learning was part of the ADAMS project. The Georgia Tech team includes noted high-performance computing researcher David Bader (computer scientist).
Read more →
Colour banding

Colour banding is a subtle form of posterisation in digital images, caused by the colour of each pixel being rounded to the nearest of the digital colour levels. While posterisation is often done for artistic effect, colour banding is an undesired artefact. In 24-bit colour modes, 8 bits per channel is usually considered sufficient to render images in Rec. 709 or sRGB. However the eye can see the difference between the colour levels, especially when there is a sharp border between two large areas of adjacent colour levels. This will happen with gradual gradients (like sunsets, dawns or clear blue skies), and also when blurring an image a large amount. Colour banding is more noticeable with fewer bits per pixel (BPP) at 16–256 colours (4–8 BPP), where there are fewer shades with a larger difference between them. The appearance of colour banding is exaggerated by the Mach bands effect. Possible solutions include the introduction of dithering and increasing the number of bits per colour channel. Because the banding comes from limitations in the presentation of the image, blurring the image does not fix this unless the image BPP is higher than the original.
Read more →
Semantic space

Semantic spaces in the natural language domain aim to create representations of natural language that are capable of capturing meaning. The original motivation for semantic spaces stems from two core challenges of natural language: Vocabulary mismatch (the fact that the same meaning can be expressed in many ways) and ambiguity of natural language (the fact that the same term can have several meanings). The application of semantic spaces in natural language processing (NLP) aims at overcoming limitations of rule-based or model-based approaches operating on the keyword level. The main drawback with these approaches is their brittleness, and the large manual effort required to create either rule-based NLP systems or training corpora for model learning. Rule-based and machine learning based models are fixed on the keyword level and break down if the vocabulary differs from that defined in the rules or from the training material used for the statistical models. Research in semantic spaces dates back more than 20 years. In 1996, two papers were published that raised a lot of attention around the general idea of creating semantic spaces: latent semantic analysis and Hyperspace Analogue to Language. However, their adoption was limited by the large computational effort required to construct and use those semantic spaces. A breakthrough with regard to the accuracy of modelling associative relations between words (e.g. "spider-web", "lighter-cigarette", as opposed to synonymous relations such as "whale-dolphin", "astronaut-driver") was achieved by explicit semantic analysis (ESA) in 2007. ESA was a novel (non-machine learning) based approach that represented words in the form of vectors with 100,000 dimensions (where each dimension represents an Article in Wikipedia). However practical applications of the approach are limited due to the large number of required dimensions in the vectors. More recently, advances in neural network techniques in combination with other new approaches (tensors) led to a host of new recent developments: Word2vec from Google, GloVe from Stanford University, and fastText from Facebook AI Research (FAIR) labs.
Read more →
Sports Card Investor

Sports Card Investor is an American sports collectibles media platform and mobile application founded by Geoff Wilson. The platform provides market data, analysis, and editorial content focused on sports trading cards and related collectibles. It operates a website, mobile app, and digital media channels covering developments in the sports card industry. The company posted its first YouTube video in July 2019, shortly before a period of rapid growth in sports card collecting in the early 2020s, which was marked by increased trading volumes and mainstream media attention. == History == Sports Card Investor was founded by Geoff Wilson, an entrepreneur and collector who began publishing sports card–related content online before launching the platform's dedicated app and subscription tools. In February 2020, the company launched Market Movers, the first website and app to chart sports card prices and track card collections. The platform expanded its media presence through partnerships and distribution agreements. In 2023, Yahoo Sports announced a new collectibles coverage initiative that included additional content from Sports Card Investor. In February 2024, the Sports Card Investor studio relocated to CardsHQ in Atlanta, Georgia, and visitors to the facility can watch Sports Card Investor videos being filmed. == Platform and content == The Sports Card Investor app provides users with pricing data, portfolio-tracking tools, and market-trend analysis for trading cards. The company also produces video and editorial content discussing market developments, grading trends, and major card releases. Coverage in industry publications has referenced Sports Card Investor in discussions about shifts in sports card licensing rights and hobby market reactions. == Industry context == The growth of Sports Card Investor coincided with a broader resurgence in trading card markets, including record sales and expanded retail presence. Mainstream outlets have cited the company and its founder in reporting on collectibles investing trends, grading practices, and market volatility. The Sports Card Investor app has attracted over 37,000 reviews on the Apple App Store, reflecting its strong user engagement within the sports card community.
Read more →
Vanish (computer science)

Vanish was a project to "give users control over the lifetime of personal data stored on the web." It was led by Roxana Geambasu at the University of Washington. The project proposed to allow a user to enter information to send across the internet, thereby relinquishing control of it. However, the user can include an "expiration date," after which the information is no longer usable by anyone who may have a copy of it, even the creator. The Vanish approach was found to be vulnerable to a Sybil attack and thus insecure by a team called Unvanish from the University of Texas, University of Michigan, and Princeton. == Theory == Vanish acts by automating the encryption of information entered by the user with an encryption key that is unknown to the user. Along with the information the user enters, the user also enters metadata concerning how long the information should remain available. The system then encrypts the information but does not store either the encryption key or the original information. Instead, it breaks up the decryption key into smaller components that are disseminated across distributed hash tables, or DHTs, via the Internet. The DHTs refresh information within their nodes on a set schedule unless configured to make the information persistent. The time delay entered by the user in the metadata controls how long the DHTs should allow the information to persist, but once that time period is over, the DHTs will reuse those nodes, making the information about the decryption stored irretrievable. As long as the decryption key may be reassembled from the DHTs, the information is retrievable. However, once the period entered by the user has lapsed, the information is no longer recoverable, as the user never possessed the decryption key. == Implementation == Vanish currently exists as a Firefox plug-in which allows a user to enter text into either a standard Gmail email or Facebook message and choose to send the message via Vanish. The message is then encrypted and sent via the normal networking pathways through the cloud to the recipient. The recipient must have the same Firefox plug-in to decrypt the message. The plugin accesses BitTorrent DHTs, which have 8-hour lifespans. This means the user may select an expiration date for the message in increments of 8 hours. After the expiration of the user-defined time span, the information in the DHT is overwritten, thereby eliminating the key. While both the user and recipient may have copies of the original encrypted message, the key used to turn it back into plain text is now gone. Although this particular instance of the data has become inaccessible, it's important to note that the information can always be saved by other means before expiration (copied or even via screen shots) and published again.
Read more →