AI Generator Song Maker

AI Generator Song Maker — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Motor theory of speech perception

  The motor theory of speech perception is the hypothesis that people perceive spoken words by identifying the vocal tract gestures with which they are pronounced rather than by identifying the sound patterns that speech generates. It originally claimed that speech perception is done through a specialized module that is innate and human-specific. Though the idea of a module has been qualified in more recent versions of the theory, the idea remains that the role of the speech motor system is not only to produce speech articulations but also to detect them. The hypothesis has gained more interest outside the field of speech perception than inside. This has increased particularly since the discovery of mirror neurons that link the production and perception of motor movements, including those made by the vocal tract. The theory was initially proposed in the Haskins Laboratories in the 1950s by Alvin Liberman and Franklin S. Cooper, and developed further by Donald Shankweiler, Michael Studdert-Kennedy, Ignatius Mattingly, Carol Fowler and Douglas Whalen. == Origins and development == The hypothesis has its origins in research using pattern playback to create reading machines for the blind that would substitute sounds for orthographic letters. This led to a close examination of how spoken sounds correspond to the acoustic spectrogram of them as a sequence of auditory sounds. This found that successive consonants and vowels overlap in time with one another (a phenomenon known as coarticulation). This suggested that speech is not heard like an acoustic "alphabet" or "cipher," but as a "code" of overlapping speech gestures. === Associationist approach === Initially, the theory was associationist: infants mimic the speech they hear and that this leads to behavioristic associations between articulation and its sensory consequences. Later, this overt mimicry would be short-circuited and become speech perception. This aspect of the theory was dropped, however, with the discovery that prelinguistic infants could already detect most of the phonetic contrasts used to separate different speech sounds. === Cognitivist approach === The behavioristic approach was replaced by a cognitivist one in which there was a speech module. The module detected speech in terms of hidden distal objects rather than at the proximal or immediate level of their input. The evidence for this was the research finding that speech processing was special such as duplex perception. === Changing distal objects === Initially, speech perception was assumed to link to speech objects that were both the invariant movements of speech articulators the invariant motor commands sent to muscles to move the vocal tract articulators This was later revised to include the phonetic gestures rather than motor commands, and then the gestures intended by the speaker at a prevocal, linguistic level, rather than actual movements. === Modern revision === The "speech is special" claim has been dropped, as it was found that speech perception could occur for nonspeech sounds (for example, slamming doors for duplex perception). === Mirror neurons === The discovery of mirror neurons has led to renewed interest in the motor theory of speech perception, and the theory still has its advocates, although there are also critics. == Support == === Nonauditory gesture information === If speech is identified in terms of how it is physically made, then nonauditory information should be incorporated into speech percepts even if it is still subjectively heard as "sounds". This is, in fact, the case. The McGurk effect shows that seeing the production of a spoken syllable that differs from an auditory cue synchronized with it affects the perception of the auditory one. In other words, if someone hears "ba" but sees a video of someone pronouncing "ga", what they hear is different—some people believe they hear "da". People find it easier to hear speech in noise if they can see the speaker. People can hear syllables better when their production can be felt haptically. === Categorical perception === Using a speech synthesizer, speech sounds can be varied in place of articulation along a continuum from /bɑ/ to /dɑ/ to /ɡɑ/, or in voice onset time on a continuum from /dɑ/ to /tɑ/ (for example). When listeners are asked to discriminate between two different sounds, they perceive sounds as belonging to discrete categories, even though the sounds vary continuously. In other words, 10 sounds (with the sound on one extreme being /dɑ/ and the sound on the other extreme being /tɑ/, and the ones in the middle varying on a scale) may all be acoustically different from one another, but the listener will hear all of them as either /dɑ/ or /tɑ/. Likewise, the English consonant /d/ may vary in its acoustic details across different phonetic contexts (the /d/ in /du/ does not technically sound the same as the one in /di/, for example), but all /d/'s as perceived by a listener fall within one category (voiced alveolar plosive) and that is because "linguistic representations are abstract, canonical, phonetic segments or the gestures that underlie these segments." This suggests that humans identify speech using categorical perception, and thus that a specialized module, such as that proposed by the motor theory of speech perception, may be on the right track. === Speech imitation === If people can hear the gestures in speech, then the imitation of speech should be very fast, as in when words are repeated that are heard in headphones as in speech shadowing. People can repeat heard syllables more quickly than they would be able to produce them normally. === Speech production === Hearing speech activates vocal tract muscles, and the motor cortex and premotor cortex. The integration of auditory and visual input in speech perception also involves such areas. Disrupting the premotor cortex disrupts the perception of speech units such as plosives. The activation of the motor areas occurs in terms of the phonemic features which link with the vocal track articulators that create speech gestures. The perception of a speech sound is aided by pre-emptively stimulating the motor representation of the articulators responsible for its pronunciation . Auditory and motor cortical coupling is restricted to a specific range of neuronal firing frequency. === Perception-action meshing === Evidence exists that perception and production are generally coupled in the motor system. This is supported by the existence of mirror neurons that are activated both by seeing (or hearing) an action and when that action is carried out. Another source of evidence is that for common coding theory between the representations used for perception and action. == Criticisms == The motor theory of speech perception is not widely held in the field of speech perception, though it is more popular in other fields, such as theoretical linguistics. As three of its advocates have noted, "it has few proponents within the field of speech perception, and many authors cite it primarily to offer critical commentary".p. 361 Several critiques of it exist. === Multiple sources === Speech perception is affected by nonproduction sources of information, such as context. Individual words are hard to understand in isolation but easy when heard in sentence context. It therefore seems that speech perception uses multiple sources that are integrated together in an optimal way. === Production === The motor theory of speech perception would predict that speech motor abilities in infants predict their speech perception abilities, but in actuality it is the other way around. It would also predict that defects in speech production would impair speech perception, but they do not. However, this only affects the first and already superseded behaviorist version of the theory, where infants were supposed to learn all production-perception patterns by imitation early in childhood. This is no longer the mainstream view of motor-speech theorists. === Speech module === Several sources of evidence for a specialized speech module have failed to be supported. Duplex perception can be observed with door slams. The McGurk effect can also be achieved with nonlinguistic stimuli, such as showing someone a video of a basketball bouncing but playing the sound of a ping-pong ball bouncing. As for categorical perception, listeners can be sensitive to acoustic differences within single phonetic categories. As a result, this part of the theory has been dropped by some researchers. === Sublexical tasks === The evidence provided for the motor theory of speech perception is limited to tasks such as syllable discrimination that use speech units not full spoken words or spoken sentences. As a result, "speech perception is sometimes interpreted as referring to the perception of speech at the sublexical level. However, the ultimate goal of these studies is presumably to understand the neural processes supporting the ability to process spee

  Read more →
• 

  Social media use by businesses

  Social media use by businesses includes a range of applications. Although social media accessed via desktop computers offer an online shopping variety of opportunities for companies in a wide range of business sectors, mobile social media, which users can access when they are "on the go" via tablet computers or smartphones, benefit companies because of the location- and time-sensitive awareness of their users. Mobile social media tools can be used for marketing research, communication, sales promotions/discounts, informal employee learning/organizational development, relationship development/loyalty programs, and e-commerce. Marketing research: Mobile social media applications provide companies data about offline consumer movements at a level of detail that was previously accessible to online companies only. These applications allow any business to know the exact time a customer who uses social media entered one of its locations, as well as know the social media comments made during the visit. Communication: Mobile social media communication takes two forms: company-to-consumer (in which a company may establish a connection to a consumer based on its location and provide reviews about locations nearby) and user-generated content. For example, McDonald's offered $5 and $10 gift-cards to 100 users randomly selected among those checking in at one of its restaurants. This promotion increased check-ins by 33% (from 2,146 to 2,865), resulted in over 50 articles and blog posts, and prompted several hundred thousand news feeds and Twitter messages. Sales promotions and discounts: Although customers have had to use printed coupons in the past, mobile social media allows companies to tailor promotions to specific users at specific times. For example, when launching its California-Cancun service, Virgin America offered users who checked in through Loopt at one of three designated taco trucks in San Francisco or Los Angeles between 11 a.m. and 3 p.m. on 31 August 2010, two tacos for $1 and two flights to Cancun or Cabo for the price of one. This special promotion was only available to people who were at a certain location at a certain time. Relationship development and loyalty programs: In order to increase long-term relationships with customers, companies can develop loyalty programs that allow customers who check-in via social media regularly at a location to earn discounts or perks. For example, American Eagle Outfitters remunerates such customers with a tiered 10%, 15%, or 20% discount on their total purchase. Informal employee learning/organizational development is facilitated by social media. Technologies such as blogs, wiki pages, web forums, social networks and other social media act as technology enhanced learning (TEL) tools, and their users perceive change in organizational structure, culture and knowledge management. The prerequisite for the successful use of social media are motivated employees who want to use the new technologies. It is central for companies to understand the factors that determine the willingness to use social media. Customer service and support: A company can gain cost savings and increase revenue and customer satisfaction by using social media platforms in customer service and support. By using social media tools, company's have easy and widescale contact to its customers and simultaneously increase their brand knowledge. E-commerce: Social media sites are increasingly implementing marketing-friendly strategies, creating platforms that are mutually beneficial for users, businesses, and the networks themselves in the popularity and accessibility of e-commerce, or online purchases. The user who posts their comments about a company's product or service benefits because they are able to share their views with their online friends and acquaintances. The company benefits because it obtains insight (positive or negative) about how their product or service is viewed by consumers. Mobile social media applications such as Amazon.com and Pinterest have started to influence an upward trend in the popularity and accessibility of e-commerce. E-commerce businesses may refer to social media as consumer-generated media (CGM). A common thread running through all definitions of social media is a blending of technology and social interaction for the co-creation of value for the business or organization that is using it. People obtain valuable information, education, news, and other data from electronic and print media. Social media are distinct from industrial and traditional media such as newspapers, magazines, television, and film as they are comparatively inexpensive marketing tools and are highly accessible. They enable anyone, including private individuals, to publish or access information easily. Industrial media generally require significant resources to publish information, and in most cases the articles go through many revisions before being published. This process adds to the cost and the resulting market price. Originally social media was only used by individuals, but now it is used by both businesses and nonprofit organizations and also in government and politics. One characteristic shared by both social and industrial media is the capability to reach small or large audiences; for example, either a blog post or a television show may reach no people or millions of people. Some of the properties that help describe the differences between social and industrial media are: Quality: In industrial (traditional) publishing—mediated by a publisher—the typical range of quality is substantially narrower (skewing to the high quality side) than in niche, unmediated markets like user-generated social media posts. The main challenge posed by the content in social media sites is the fact that the distribution of quality has high variance: from very high-quality items to low-quality, sometimes even abusive or inappropriate content. Reach: Both industrial and social media technologies provide scale and are capable of reaching a global audience. Industrial media, however, typically use a centralized framework for organization, production, and dissemination, whereas social media are by their very nature more decentralized, less hierarchical, and distinguished by multiple points of production and utility. Frequency: The number of times users access a type of media per day. Heavy social media users, such as young people, check their social media account numerous times throughout the day. Accessibility: The means of production for industrial media are typically government or corporate (privately owned); social media tools are generally available to the public at little or no cost, or they are supported by advertising revenue. While social media tools are available to anyone with access to Internet and a computer or mobile device, due to the digital divide, the poorest segment of the population lacks access to the Internet and computer. Low-income people may have more access to traditional media (TV, radio, etc.), as an inexpensive TV and aerial or radio costs much less than an inexpensive computer or mobile device. Moreover, in many regions, TV or radio owners can tune into free over the air programming; computer or mobile device owners need Internet access to go to social media sites. Usability: Industrial media production typically requires specialized skills and training. For example, in the 1970s, to record a pop song, an aspiring singer would have to rent time in an expensive professional recording studio and hire an audio engineer. Conversely, most social media activities, such as posting a video of oneself singing a song require only modest reinterpretation of existing skills (assuming a person understands Web 2.0 technologies); in theory, anyone with access to the Internet can operate the means of social media production, and post digital pictures, videos or text online. Immediacy: The time lag between communications produced by industrial media can be long (days, weeks, or even months, by the time the content has been reviewed by various editors and fact checkers) compared to social media (which can be capable of virtually instantaneous responses). The immediacy of social media can be seen as a strength, in that it enables regular people to instantly communicate their opinions and information. At the same time, the immediacy of social media can also be seen as a weakness, as the lack of fact checking and editorial "gatekeepers" facilitates the circulation of hoaxes and fake news. Permanence: Industrial media, once created, cannot be altered (e.g., once a magazine article or paper book is printed and distributed, changes cannot be made to that same article in that print run) whereas social media posts can be altered almost instantaneously, when the user decides to edit their post or due to comments from other readers. Community media constitute a hybrid of industrial and social media. Though community-owned, some community radio,

  Read more →
• 

  Chaos Communication Congress

  The Chaos Communication Congress is an annual hacker conference organized by the Chaos Computer Club. The congress features a variety of lectures and workshops on technical and political issues related to security, cryptography, privacy and online freedom of speech. It has taken place regularly at the end of the year since 1984, with the current date and duration (27–30 December) established in 2005. It is considered one of the largest events of its kind, alongside DEF CON in Las Vegas. == History == The congress is held in Germany. It started in 1984 in Hamburg, moved to Berlin in 1998, and back to Hamburg in 2012, having exceeded the capacity of the Berlin venue with more than 4500 attendees. Since then, it attracts an increasing number of people: around 6600 attendees in 2012, over 13000 in 2015, and more than 15000 in 2017. From 2017 to 2019, it took place at the Trade Fair Grounds in Leipzig, since the Hamburg venue (CCH) was closed for renovation in 2017 and the existing space was not enough for the growing congress. The congress moved back to Hamburg in 2023, after the renovation of CCH was finished. A large range of speakers are featured. The event is organized by volunteers called Chaos Angels. The non-members entry fee for four days was €100 in 2016, and was raised to €120 in 2018 to include a public transport ticket for the Leipzig area. An important part of the congress are the assemblies, semi-open spaces with clusters of tables and internet connections for groups and individuals to collaborate and socialize in projects, workshops and hands-on talks. These assembly spaces, introduced at the 2012 meeting, combine the hack center project space and distributed group spaces of former years. From 1997 to 2004 the congress also hosted the annual German Lockpicking Championships. 2005 was the first year the Congress lasted four days instead of three and lacked the German Lockpicking Championships. 2020 was the first year where the Congress did not take place at a physical location due to the COVID-19 pandemic, giving way to the first Remote Chaos Experience (rC3). The Chaos Computer Club announced to return to the now newly renovated Congress Center Hamburg for the 37th edition of the Chaos Communication Congress. The announcement confirms the usual date of 27-30 December, notably omitting the year it will be held. On 18 October 2022, they confirmed that the congress will indeed not be held in 2022. On 6 October 2023, the CCC announced that 37C3 will take place again on the usual dates in 2023. === Timeline ===

  Read more →
• 

  Data lake

  A data lake is a system or repository of data stored in its natural/raw format, usually object blobs or files. A data lake is usually a single store of data including raw copies of source system data, sensor data, social data etc., and transformed data used for tasks such as reporting, visualization, advanced analytics, and machine learning. A data lake can include structured data from relational databases (rows and columns), semi-structured data (CSV, logs, XML, JSON), unstructured data (emails, documents, PDFs), and binary data (images, audio, video). A data lake can be established on premises (within an organization's data centers) or in the cloud (using cloud services). == Background == James Dixon, then chief technology officer at Pentaho, coined the term by 2011 to contrast it with data mart, which is a smaller repository of interesting attributes derived from raw data. In promoting data lakes, he argued that data marts have several inherent problems, such as information siloing. PricewaterhouseCoopers (PwC) said that data lakes could "put an end to data silos". In their study on data lakes, they noted that enterprises were "starting to extract and place data for analytics into a single, Hadoop-based repository." == Examples == Many companies use cloud storage services such as Google Cloud Storage and Amazon S3 or a distributed file system such as Apache Hadoop distributed file system (HDFS). There is a gradual academic interest in the concept of data lakes. For example, Personal DataLake at Cardiff University is a new type of data lake which aims at managing big data of individual users by providing a single point of collecting, organizing, and sharing personal data. Early data lakes, such as Hadoop 1.0, had limited capabilities because it only supported batch-oriented processing (Map Reduce). Interacting with it required expertise in Java, map reduce and higher-level tools like Apache Pig, Apache Spark and Apache Hive (which were also originally batch-oriented). == Criticism == Poorly managed data lakes have been facetiously called data swamps. In June 2015, David Needle characterized "so-called data lakes" as "one of the more controversial ways to manage big data". PwC was also careful to note in their research that not all data lake initiatives are successful. They quote Sean Martin, CTO of Cambridge Semantics: We see customers creating big data graveyards, dumping everything into Hadoop distributed file system (HDFS) and hoping to do something with it down the road. But then they just lose track of what’s there. The main challenge is not creating a data lake, but taking advantage of the opportunities it presents. They describe companies that build successful data lakes as gradually maturing their lake as they figure out which data and metadata are important to the organization. Another criticism is that the term data lake is used with many different meanings. It may be used to refer to, for example: any tools or data management practices that are not data warehouses; a particular technology for implementation; a raw data reservoir; a hub for ETL offload; or a central hub for self-service analytics. While critiques of data lakes are warranted, in many cases they apply to other data projects as well. For example, the definition of data warehouse is also changeable, and not all data warehouse efforts have been successful. In response to various critiques, McKinsey noted that the data lake should be viewed as a service model for delivering business value within the enterprise, not a technology outcome. == Data lakehouses == Data lakehouses are a hybrid approach that can ingest a variety of raw data formats like a data lake, while also providing ACID transactions and enforced data quality like a data warehouse.

  Read more →
• 

  Data item

  A data item describes an atomic state of a particular object concerning a specific property at a certain time point. A collection of data items for the same object at the same time forms an object instance (or table row). Any type of complex information can be broken down to elementary data items (atomic state). Data items are identified by object (o), property (p) and time (t), while the value (v) is a function of o, p and t: v = F(o,p,t). Values typically are represented by symbols like numbers, texts, images, sounds or videos. Values are not necessarily atomic. A value's complexity depends on the complexity of the property and time component. When looking at databases or XML files, the object is usually identified by an object name or other type of object identifier, which is part of the "data". Properties are defined as columns (table row), properties (object instance) or tags (XML). Often, time is not explicitly expressed and is an attribute applying to the complete data set. Other data collections provide time on the instance level (time series), column level, or even attribute/property level.

  Read more →
• 

  Data profiling

  Data profiling is the process of examining the data available from an existing information source (e.g. a database or a file) and collecting statistics or informative summaries about that data. The purpose of these statistics may be to: Find out whether existing data can be easily used for other purposes Improve the ability to search data by tagging it with keywords, descriptions, or assigning it to a category Assess data quality, including whether the data conforms to particular standards or patterns Assess the risk involved in integrating data in new applications, including the challenges of joins Discover metadata of the source database, including value patterns and distributions, key candidates, foreign-key candidates, and functional dependencies Assess whether known metadata accurately describes the actual values in the source database Understanding data challenges early in any data intensive project, so that late project surprises are avoided. Finding data problems late in the project can lead to delays and cost overruns. Have an enterprise view of all data, for uses such as master data management, where key data is needed, or data governance for improving data quality. == Introduction == Data profiling refers to the analysis of information for use in a data warehouse in order to clarify the structure, content, relationships, and derivation rules of the data. Profiling helps to not only understand anomalies and assess data quality, but also to discover, register, and assess enterprise metadata. The result of the analysis is used to determine the suitability of the candidate source systems, usually giving the basis for an early go/no-go decision, and also to identify problems for later solution design. == How data profiling is conducted == Data profiling utilizes methods of descriptive statistics such as minimum, maximum, mean, mode, percentile, standard deviation, frequency, variation, aggregates such as count and sum, and additional metadata information obtained during data profiling such as data type, length, discrete values, uniqueness, occurrence of null values, typical string patterns, and abstract type recognition. The metadata can then be used to discover problems such as illegal values, misspellings, missing values, varying value representation, and duplicates. Different analyses are performed for different structural levels. E.g. single columns could be profiled individually to get an understanding of frequency distribution of different values, type, and use of each column. Embedded value dependencies can be exposed in a cross-columns analysis. Finally, overlapping value sets possibly representing foreign key relationships between entities can be explored in an inter-table analysis. Normally, purpose-built tools are used for data profiling to ease the process. The computational complexity increases when going from single column, to single table, to cross-table structural profiling. Therefore, performance is an evaluation criterion for profiling tools. == When is data profiling conducted? == According to Kimball, data profiling is performed several times and with varying intensity throughout the data warehouse developing process. A light profiling assessment should be undertaken immediately after candidate source systems have been identified and DW/BI business requirements have been satisfied. The purpose of this initial analysis is to clarify at an early stage if the correct data is available at the appropriate detail level and that anomalies can be handled subsequently. If this is not the case the project may be terminated. Additionally, more in-depth profiling is done prior to the dimensional modeling process in order assess what is required to convert data into a dimensional model. Detailed profiling extends into the ETL system design process in order to determine the appropriate data to extract and which filters to apply to the data set. Additionally, data profiling may be conducted in the data warehouse development process after data has been loaded into staging, the data marts, etc. Conducting data at these stages helps ensure that data cleaning and transformations have been done correctly and in compliance of requirements. == Benefits and examples == Data profiling can improve data quality, shorten the implementation cycle of major projects, and improve users' understanding of data. Discovering business knowledge embedded in data itself is one of the significant benefits derived from data profiling. It can improve data accuracy in corporate databases.

  Read more →
• 

  Data lineage

  Data lineage refers to the process of tracking how data is generated, transformed, transmitted and used across systems over time. It documents data's origins, transformations and movements, providing detailed visibility into its life cycle. This process simplifies the identification of errors in data analytics workflows, by enabling users to trace issues back to their root causes. Data lineage facilitates the ability to replay specific segments or inputs of the dataflow. This can be used in debugging or regenerating lost outputs. In database systems, this concept is closely related to data provenance, which involves maintaining records of inputs, entities, systems and processes that influence data. Data provenance provides a historical record of data origins and transformations. It supports forensic activities such as data-dependency analysis, error/compromise detection, recovery, auditing and compliance analysis: "Lineage is a simple type of why provenance." Data governance plays a critical role in managing metadata by establishing guidelines, strategies and policies. Enhancing data lineage with data quality measures and master data management adds business value. Although data lineage is typically represented through a graphical user interface (GUI), the methods for gathering and exposing metadata to this interface can vary. Based on the metadata collection approach, data lineage can be categorized into three types: Those involving software packages for structured data, programming languages and Big data systems. Data lineage information includes technical metadata about data transformations. Enriched data lineage may include additional elements such as data quality test results, reference data, data models, business terminology, data stewardship information, program management details and enterprise systems associated with data points and transformations. Data lineage visualization tools often include masking features that allow users to focus on information relevant to specific use cases. To unify representations across disparate systems, metadata normalization or standardization may be required. == Representation of data lineage == Representation broadly depends on the scope of the metadata management and reference point of interest. Data lineage provides sources of the data and intermediate data flow hops from the reference point with backward data lineage, leading to the final destination's data points and its intermediate data flows with forward data lineage. These views can be combined with end-to-end lineage for a reference point that provides a complete audit trail of that data point of interest from sources to their final destinations. As the data points or hops increase, the complexity of such representation becomes incomprehensible. Thus, the best feature of the data lineage view is the ability to simplify the view by temporarily masking unwanted peripheral data points. Tools with the masking feature enable scalability of the view and enhance analysis with the best user experience for both technical and business users. Data lineage also enables companies to trace sources of specific business data to track errors, implement changes in processes and implementing system migrations to save significant amounts of time and resources. Data lineage can improve efficiency in business intelligence BI processes. Data lineage can be represented visually to discover the data flow and movement from its source to destination via various changes and hops on its way in the enterprise environment. This includes how the data is transformed along the way, how the representation and parameters change and how the data splits or converges after each hop. A simple representation of the Data Lineage can be shown with dots and lines, where dots represent data containers for data points, and lines connecting them represent transformations the data undergoes between the data containers. Data lineage can be visualized at various levels based on the granularity of the view. At a very high-level, data lineage is visualized as systems that the data interacts with before it reaches its destination. At its most granular, visualizations at the data point level can provide the details of the data point and its historical behavior, attribute properties and trends and data quality of the data passed through that specific data point in the data lineage. The scope of the data lineage determines the volume of metadata required to represent its data lineage. Usually, data governance and data management of an organization determine the scope of the data lineage based on their regulations, enterprise data management strategy, data impact, reporting attributes and critical data elements of the organization. == Rationale == Distributed systems like Google Map Reduce, Microsoft Dryad, Apache Hadoop (an open-source project) and Google Pregel provide such platforms for businesses and users. However, even with these systems, Big Data analytics can take several hours, days or weeks to run, simply due to the data volumes involved. For example, a ratings prediction algorithm for the Netflix Prize challenge took nearly 20 hours to execute on 50 cores, and a large-scale image processing task to estimate geographic information took 3 days to complete using 400 cores. "The Large Synoptic Survey Telescope is expected to generate terabytes of data every night and eventually store more than 50 petabytes, while in the bioinformatics sector, the 12 largest genome sequencing houses in the world now store petabytes of data apiece. It is very difficult for a data scientist to trace an unknown or an unanticipated result. === Big data debugging === Big data analytics is the process of examining large data sets to uncover hidden patterns, unknown correlations, market trends, customer preferences and other useful business information. Machine learning, among other algorithms, is used to transform and analyze the data. Due to the large size of the data, there could be unknown features in the data. The massive scale and unstructured nature of data, the complexity of these analytics pipelines, and long runtimes pose significant manageability and debugging challenges. Even a single error in these analytics can be extremely difficult to identify and remove. While one may debug them by re-running the entire analytics through a debugger for stepwise debugging, this can be expensive due to the amount of time and resources needed. Auditing and data validation are other major problems due to the growing ease of access to relevant data sources for use in experiments, the sharing of data between scientific communities and use of third-party data in business enterprises. As such, more cost-efficient ways of analyzing data intensive scale-able computing (DISC) are crucial to their continued effective use. === Challenges in Big Data debugging === ==== Massive scale ==== According to an EMC/IDC study, 2.8 ZB of data were created and replicated in 2012. Furthermore, the same study states that the digital universe will double every two years between now and 2020, and that there will be approximately 5.2 TB of data for every person in 2020. Based on current technology, the storage of this much data will mean greater energy usage by data centers. ==== Unstructured data ==== Unstructured data usually refers to information that doesn't reside in a traditional row-column database. Unstructured data files often include text and multimedia content, such as e-mail messages, word processing documents, videos, photos, audio files, presentations, web pages and many other kinds of business documents. While these types of files may have an internal structure, they are still considered "unstructured" because the data they contain doesn't fit neatly into a database. The amount of unstructured data in enterprises is growing many times faster than structured databases are growing. Big data can include both structured and unstructured data, but IDC estimates that 90 percent of Big Data is unstructured data. The fundamental challenge of unstructured data sources is that they are difficult for non-technical business users and data analysts alike to unbox, understand and prepare for analytic use. Beyond issues of structure, the sheer volume of this type of data contributes to such difficulty. Because of this, current data mining techniques often leave out valuable information and make analyzing unstructured data laborious and expensive. In today's competitive business environment, companies have to find and analyze the relevant data they need quickly. The challenge is going through the volumes of data and accessing the level of detail needed, all at a high speed. The challenge only grows as the degree of granularity increases. One possible solution is hardware. Some vendors are using increased memory and parallel processing to crunch large volumes of data quickly. Another method is putting data in-memory but using a grid

  Read more →
• 

  SCinet

  SCinet is the high-performance network built annually by volunteers in support of SC (formerly Supercomputing, the International Conference for High Performance Computing, Networking, Storage and Analysis). SCinet is the primary network for the yearly conference and is used by attendees and exhibitors to demonstrate and test high-performance computing and networking applications. == International Community == SCinet is also a hub for the international networking community. It provides a platform to share the latest research, technologies, and demonstrations for networks, network technology providers, and even software developers who are in charge of supporting HPC communities at their own institutions or organizations. == Volunteers == Nearly 200 volunteers from educational institutions, high performance computing sites, equipment vendors, research and education networks, government agencies and telecommunications carriers collaborate via technology and in-person to design, build and operate SCinet. While many of these credentialed individuals have volunteered at SCinet for years, first timers join the team each year. They include international students and participants in the National Science Foundation-funded Women in IT Networking at SC (WINS) program. The 2017 SCinet team included women and men from high performance computing institutions in the U.S. and throughout the world. == History == Originated in 1991 as an initiative within the SC conference to provide networking to attendees, SCinet has grown to become the "World's Fastest Network" during the duration of the conference. For 29 years, SCinet has provided SC attendees and the high performance computing (HPC) community with the innovative network platform necessary to internationally interconnect, transport, and display HPC research during SC. Historically, SCinet has been used as a platform to test networking technology and applications which have found their way into common use. == Research and development == In the past years, SCinet deployed conference wide networking technologies such as ATM, FDDI, HiPPi before they were deployed commercially.

  Read more →
• 

  Human–AI interaction

  Human–AI interaction is a developing field of research and a sub-field of human–computer interaction (HCI). HCI is a field of research that explores the interactions between humans and computer-based technology, focusing on design implementation, user experience, and psychological factors. With the proliferation of artificial intelligence (AI), there has developed a sub-section of HCI research dedicated specifically to artificial intelligence and how people interact with and are impacted by it. This is human–AI interaction, abbreviated either as HAX or HAII. == Introduction == Artificial intelligence (AI), in general, has fluid definitions and varied research applications, but in brief can be applied to mechanizing tasks that would require human intelligence to complete. AI are tools designed to replicate the human abilities of navigating uncertainty, active learning, and processing information in different contexts. Within the context of HCI and HAX research, artificial intelligence can be broken into two sub-fields, natural language processing (NLP) and computer vision (CV). AI technologies notably include machine-learning, deep-learning and neural networks, and large-language models (LLMs). As a new and rapidly developing technology, AI is changing how computers work and therefore changing how humans interact with computers. Unlike the traditional human-computer interaction, where a human directs a machine, human-AI interaction is characterized by a more collaborative relationship between the computer program (the AI) and the human user, as AI is perceived as an active agent rather than a tool. This changing dynamic creates new questions and necessitates new research methods that are not present in traditional HCI research. According to a scoping review on the state of the discipline, the HAX field comprises research on the "design, development, and evaluation of AI systems" and encompasses the themes of human-AI collaboration, human-AI competition, human-AI conflict, and human-AI symbiosis. == Design == Machine learning and artificial intelligence have been used for decades in targeted advertising and to recommend content in social media. Ethical Guidelines (Framework for ethical AI development) == User Experience (UX) == This section should handle research on how users interact with tools. What techniques do they use, do they develop habits, what types of programs and devices are they using to access these tools, what do they use these tools to do exactly. === Cognitive Frameworks in AI Tool Users === AI has been viewed with various expectations, attributions, and often misconceptions. Many people exclusively understand AI as the LLM chatbots they interact with, like ChatGPT or Claude, or other generative AI programs. [Insert section: discuss how people interact with these specific AI tools as a connection to the following paragraphs] Most fundamentally, humans have a mental model of understanding AI's reasoning and motivation for its decision recommendations, and building a holistic and precise mental model of AI helps people create prompts to receive more valuable responses from AI. However, these mental models are not whole because people can only gain more information about AI through their limited interaction with it; more interaction with AI builds a better mental model that a person may build to produce better prompt outcomes. Research on human-AI interaction has emphasized that users develop mental models of AI systems and revise those models through repeated use, feedback, and explanation, while design research has stressed the importance of communicating capabilities and limitations early and supporting trust calibration through explanation and correction. In a 2025 SSRN working paper, John DeVadoss proposed "Hypothetico-Deductive Interaction" (HDI), a framework that describes human-AI interaction as a mutual process of conjecture and refutation in which users test assumptions about an AI system's capabilities while the system infers and updates assumptions about user goals through its responses and clarifying questions. DeVadoss argued that this framing helps explain prompt iteration, weak capability awareness, and trust miscalibration, and suggested design responses such as clearer communication of uncertainty, easier correction, actionable explanations, and safer failure modes. == Research themes == === Human-AI collaboration === Human-AI collaboration occurs when the human and AI supervise the task on the same level and extent to achieve the same goal. Some collaboration occurs in the form of augmenting human capability. AI may help human ability in analysis and decision-making through providing and weighing a volume of information, and learning to defer to the human decision when it recognizes its unreliability. It is especially beneficial when the human can detect a task that AI can be trusted to make few errors so that there is not a lot of excessive checking process required on the human's end. Some findings show signs of human-AI augmentation, or human–AI symbiosis, in which AI enhances human ability in a way that co-working on a task with AI produces better outcomes than a human working alone. For example: the quality and speed of customer service tasks increase when a human agent collaborates with AI, training on specific models allows AI to improve diagnoses in clinical settings, and AI with human-intervention can improve creativity of artwork while fully AI-generated haikus were rated negatively. Human-AI synergy, a concept in which human-AI collaboration would produce more optimal outcomes than either human or AI working alone could explain why AI does not always help with performance. Some AI features and development may accelerate human-AI synergy, while others may stagnate it. For example, when AI updates for better performance, it sometimes worsens the team performance with human and AI by reducing the compatibility with the new model and the mental model a user has developed on the previous version. Research has found that AI often supports human capabilities in the form of human-AI augmentation and not human-AI synergy, potentially because people rely too much on AI and stop thinking on their own. Prompting people to actively engage in analysis and think when to follow AI recommendations reduces their over-reliance, especially for individuals with higher need for cognition. === Human-AI competition === Robots and computers have substituted routine tasks historically completed by humans, but agentic AI has made it possible to also replace cognitive tasks including taking phone calls for appointments and driving a car. At the point of 2016, research has estimated that 45% of paid activities could be replaced by AI by 2030. Perceived autonomy of robots is known to increase people's negative attitude toward them, and worry about the technology taking over leads people to reject it. There has been a consistent tendency of algorithm aversion in which people prefer human advice over AI advice. However, people are not always able to tell apart tasks completed by AI or other humans. See AI takeover for more information. It is also notable that this sentiment is more prominent in the Western cultures as Westerners tend to show less positive views about AI compared to East Asians. == Research on the psychological impacts of AI == === Perception on others who use AI === As much as people perceive and make judgment about AI itself, they also form impressions of themselves and others who use AI. In the workplace, employees who disclose the use of AI in their tasks are more likely to receive feedback that they are not as hardworking as those who are in the same job who receive non-AI help to complete the same tasks. AI use disclosure diminishes the perceived legitimacy in the employee's task and decision making which ultimately leads observers to distrust people who use AI. Although these negative effects of AI use disclosure are weakened by the observers who use AI frequently themselves, the effect is still not attenuated by the observers' positive attitude towards AI. === Bias, AI, and human === Although AI provides a wide range of information and suggestions to its users, AI itself is not free of biases and stereotypes, and it does not always help people reduce their cognitive errors and biases. People are prone to such errors by failing to see other potential ideas and cases that are not listed by AI responses and committing to a decision suggested by AI that directly contradicts the correct information and directions that they are already aware of. Gender bias is also reflected as the female gendering of AI technologies which conceptualizes females as a helpful assistant. == Emotional connection with AI == Human-AI interaction has been theorized in the context of interpersonal relationships mainly in social psychology, communications and media studies, and as a technology interface through the lens of hu

  Read more →
• 

  TRAME

  TRAME (TRAnsmission of MEssages) was the name of the second computer network in the world similar to the internet to be used in an electric utility. Like the internet, the base technology was packet switching; it was developed by the electric utility ENHER in Barcelona. It was deployed by the same utility, first in Catalonia and Aragón, Spain, and later in other places. Its development started in 1974 and the first routers, called nodes at that time, were deployed by 1978. The network was in operation until 2016 (38 years) with successive technological software and hardware updates. == Beginnings == In 1974, packet switching was a technology known only in research circles. The concept began in 1968 in association with the United States' Advanced Research Projects Agency (ARPA) research project ARPANET. The idea of applying the packet switching concept to electric utilities control communication networks first appeared in 1974 when the Swedish power utility Vattenfall started to create its TIDAS packet-switching network and was followed by the Spanish electric utility ENHER, which aimed to telecontrol and automate its high-voltage power grid. For this purpose, ENHER created a specific team of people to develop both the packet-switching network and the supervisory control and data acquisition (SCADA) system, also called the telecontrol system. By 1978 the first four TRAME routers were available and by 1980, eight of them were deployed and operating. The printed circuit boards (PCBs) controlling the communication lines were connected to a shared memory PCB allowing them to exchange data and messages. The project was developed together with its main initial application, the Telecontrol or SCADA system SICL (Sistema Integral de Control Local) with which initially they shared a very similar hardware. The maximum link capacity was 9600 bit/s, which in 1980 was the maximum possible on a 4 kHz wide voice channel at the time. These channels were the basic unit of the then-analog communication systems in use. By that time power utilities used either telephone calls or low speed (below 1200bit/s) dedicated links for telecontrol, typically shared among ten high-voltage electrical substations. == Services == The basic service provided by the TRAME network was SCADA or Telecontrol to automate the high-voltage power grid, thus improving operational efficiency, which was until then operated manually with telephone communication between human operators. Each TRAME router was associated with one or more remote terminal units (RTUs) of the SICL telecontrol system. It also had connected screens, and later PCs, located in electrical substations to interchange messages between them and with the Control Center located in the well-known Casa Fuster in Barcelona. It was a kind of predecessor to today's e-mail. Later, in the 1990s, other protocols (X.25, IP) were developed to include corporate information technology (IT) terminals, company physical surveillance systems and other services. Additionally, applications and terminals were developed for the transmission of voice and video over the TRAME network. == Protocols == The TRAME routing system, like that of the original ARPANET, was based on the Bellman-Ford algorithm but with "split-horizon" as in the Swedish TIDAS network, but with an original improvement. This protocol allows optimal paths to be found in meshed networks for each packet to be transmitted, allowing the shared use of the same network by multiple services. In contrast, traditional circuit-switched technology used to establish dedicated circuits for each service or communication. The addressing of routers and terminals used a proprietary system with a 16-bit address; it would be the equivalent of the well-known IP (Internet Protocol) version 4 (IPv4), still in use on the internet today, which uses 32-bit addresses. It is necessary to take into account that in 1978, the IPv4 protocol did not yet exist since the IPv4 version used on the internet did not appear until 1981, and in fact, did not reach the general public until much later. The line protocols were also proprietary and were called UCL (Unidad de Control de Línea, 'line control unit'), which linked the routers together, and UTR (Unión TRAME-Remotas), the access protocol. They were designed to offer the highest quality of service required by the telecontrol/SCADA function in terms of data integrity and availability set by the International Electrotechnical Commission (IEC) IEC-870-5-1 and ANSI C37.1. standards, and because the protocol used at the time in corporate computer networks, HDLC (high-level data link control), did not offer enough quality for critical industrial applications. Later on, other protocols like X.25 and IP were also made compatible with the aforementioned TRAME protocols. In 2000, the UTR protocol was replaced by the international standard IEC 60870- 5-101/104. Initially network flow control was based on the management of eight data priorities in head-of-the-line (HOL) waiting queues. Later and after some experimentation, a flow control method based on a bit indicating route congestion and management of the gap between packets when accessing the network was adopted. This required measuring the capacity of the route bottleneck. An end-to-end protocol was also added for some flows requiring order preservation like X.25. == Evolution == To last for 38 years, the technology had to endure intense evolution. There were essentially four TRAME generations which are summarized in the table. A description of the four generations of TRAME is provided below. === TRAME 1 === The project began in 1974 and in 1978 a first network with four routers was already installed and in operation at the electric utility ENHER. In 1980, the network had eight nodes in operation (see Figure I). The hardware was based on the Zilog Z80 processor and had a multiprocessor structure with 16 processors sharing a common memory. The software was developed at ENHER's headquarters located in the well-known Casa Fuster, Passeig de Gràcia, 132, Barcelona, using the Z80 assembly language. Beyond 1980 the software began to be written in C programming language and an HP64000 Logic Development System emulator was used for the purpose. The hardware was produced by ISEL, an INI (Instituto Nacional de Indústria) company. The routing system was a variant of Bellman-Ford with split-horizon. It was an improvement of the original ARPA network routing system consisting of an original update procedure which allowed for a faster reaction to changes. The distance function was the number of packets in the output waiting queues plus one. The line protocols (UCL for internal lines linking routers and UTR for accessing the network) were designed to meet the stringent requirements set for telecontrol (SCADA) of high-voltage power networks (IEC-870-5-1 and ANSI C37.1 standards). At the OSI transport layer, windows with a width of 1 to 8, depending on the required service, residing in the terminals were used. Initially, addresses were only 14 bits long to address both the routers (called nodes by then) and the devices connected to them. They were made up of two fields, an 8-bit field to address the router and a 6-bit sub-address to address the terminals connected to it. The node address was assigned to the nodes and not to the ends of the links as in the internet. The basic advantages of TRAME over other technologies used in electric utilities at the time were in part due to the packet technology itself: ability to manage any network topology, automatic adaptability to topological and traffic changes, integration of different link technologies (digital or analog) and capacities in a single network, open and decentralized intercommunicability between users and devices, simultaneous communication with several users and locations from a single physical connection, and integrated network supervision. In fact, the network was provided from its inception with a supervision center consisting of a computer and a synoptic board located at the company's headquarters (see Figure II). But other advantages were due to the specific design of TRAME: high data integrity, priority support for packets, and ease of including special protocols such as the many SCADA protocols in use at that time. All of the above resulted in improved quality of service, especially with respect to data availability and data integrity, and in the integration of services in a single network. Part of the evolution of its deployment can be seen in Figures II to IV. === TRAME 2 === In 1990, TRAME 2 was fully deployed and TRAME 1 was replaced. The processor of the new hardware was Intel 80286 and the hardware structure and external appearance of the routers was very similar to that of TRAME 1. The software was written in C and the above-mentioned emulator continued to be used. Improvements over TRAME 1 were the introduction of the standardized X.25 access protocol

  Read more →
• 

  Computer network

  In computer science, computer engineering, and telecommunications, a network is a group of communicating computers and peripherals known as hosts, which communicate data to other hosts via communication protocols, as facilitated by networking hardware. Within a computer network, hosts are identified by network addresses, which allow networking hardware to locate and identify hosts. Hosts may also have hostnames, memorable labels for the host nodes, which can be mapped to a network address using a hosts file or a name server such as Domain Name Service. The physical medium that supports information exchange includes wired media like copper cables, optical fibers, and wireless radio-frequency media. The arrangement of hosts and hardware within a network architecture is known as the network topology. The first computer network was created in 1940 when George Stibitz connected a terminal at Dartmouth to his Complex Number Calculator at Bell Labs in New York. Today, almost all computers are connected to a computer network, such as the global Internet or embedded networks such as those found in many modern electronic devices. Many applications have only limited functionality unless they are connected to a network. Networks support applications and services, such as access to the World Wide Web, digital video and audio, application and storage servers, printers, and email and instant messaging applications. == History == === Early origins (1940 – 1960s) === In 1940, George Stibitz of Bell Labs connected a teletype at Dartmouth to a Bell Labs computer running his Complex Number Calculator to demonstrate the use of computers at long distance. This was the first real-time, remote use of a computing machine. In the late 1950s, a network of computers was built for the U.S. military Semi-Automatic Ground Environment (SAGE) radar system using the Bell 101 modem. It was the first commercial modem for computers, released by AT&T Corporation in 1958. The modem allowed digital data to be transmitted over regular unconditioned telephone lines at a speed of 110 bits per second (bit/s). In 1959, Christopher Strachey filed a patent application for time-sharing in the United Kingdom and John McCarthy initiated the first project to implement time-sharing of user programs at MIT. Strachey passed the concept on to J. C. R. Licklider at the inaugural UNESCO Information Processing Conference in Paris that year. McCarthy was instrumental in the creation of three of the earliest time-sharing systems (the Compatible Time-Sharing System in 1961, the BBN Time-Sharing System in 1962, and the Dartmouth Time-Sharing System in 1963). In 1959, Anatoly Kitov proposed to the Central Committee of the Communist Party of the Soviet Union a detailed plan for the re-organization of the control of the Soviet armed forces and of the Soviet economy on the basis of a network of computing centers. Kitov's proposal was rejected, as later was the 1962 OGAS economy management network project. During the 1960s, Paul Baran and Donald Davies independently invented the concept of packet switching for data communication between computers over a network. Baran's work addressed adaptive routing of message blocks across a distributed network, but did not include routers with software switches, nor the idea that users, rather than the network itself, would provide the reliability. Davies' hierarchical network design included high-speed routers, communication protocols and the essence of the end-to-end principle. The NPL network, a local area network at the National Physical Laboratory (United Kingdom), pioneered the implementation of the concept in 1968-69 using 768 kbit/s links. Both Baran's and Davies' inventions were seminal contributions that influenced the development of computer networks. === ARPANET (1969 – 1974) === In 1962 and 1963, J. C. R. Licklider sent a series of memos to office colleagues discussing the concept of the "Intergalactic Computer Network", a computer network intended to allow general communications among computer users. This ultimately became the basis for the ARPANET, which began in 1969. That year, the first four nodes of the ARPANET were connected using 50 kbit/s circuits between the University of California at Los Angeles, the Stanford Research Institute, the University of California, Santa Barbara, and the University of Utah. Designed principally by Bob Kahn, the network's routing, flow control, software design and network control were developed by the IMP team working for Bolt Beranek & Newman. In the early 1970s, Leonard Kleinrock carried out mathematical work to model the performance of packet-switched networks, which underpinned the development of the ARPANET. His theoretical work on hierarchical routing in the late 1970s with student Farouk Kamoun remains critical to the operation of the Internet today. In 1973, Peter Kirstein put internetworking into practice at University College London (UCL), connecting the ARPANET to British academic networks, the first international heterogeneous computer network. That same year, Robert Metcalfe wrote a formal memo at Xerox PARC describing Ethernet, a local area networking system he created with David Boggs. It was inspired by the packet radio ALOHAnet, started by Norman Abramson and Franklin Kuo at the University of Hawaii in the late 1960s. Metcalfe and Boggs, with John Shoch and Edward Taft, also developed the PARC Universal Packet for internetworking. That year, the French CYCLADES network, directed by Louis Pouzin was the first to make the hosts responsible for the reliable delivery of data, rather than this being a centralized service of the network itself. === The internet (1974 – present) === In 1974, Vint Cerf and Bob Kahn published their seminal 1974 paper on internetworking, A Protocol for Packet Network Intercommunication. Later that year, Cerf, Yogen Dalal, and Carl Sunshine wrote the first Transmission Control Protocol (TCP) specification, RFC 675, coining the term Internet as a shorthand for internetworking. In July 1976, Metcalfe and Boggs published their paper "Ethernet: Distributed Packet Switching for Local Computer Networks" and in December 1977, together with Butler Lampson and Charles P. Thacker, they received U.S. patent 4063220A for their invention. In 1976, John Murphy of Datapoint Corporation created ARCNET, a token-passing network first used to share storage devices. In 1979, Robert Metcalfe pursued making Ethernet an open standard. In 1980, Ethernet was upgraded from the original 2.94 Mbit/s protocol to the 10 Mbit/s protocol, which was developed by Ron Crane, Bob Garner, Roy Ogus, Hal Murray, Dave Redell and Yogen Dalal. In 1986, the National Science Foundation (NSF) launched the National Science Foundation Network (NSFNET) as a general-purpose research network connecting various NSF-funded sites to each other and to regional research and education networks. In 1995, the transmission speed capacity for Ethernet increased from 10 Mbit/s to 100 Mbit/s. By 1998, Ethernet supported transmission speeds of 1 Gbit/s. Subsequently, higher speeds of up to 800 Gbit/s were added (as of 2025). The scaling of Ethernet has been a contributing factor to its continued use. In the 1980s and 1990s, as embedded systems were becoming increasingly important in factories, cars, and airplanes, network protocols were developed to allow the embedded computers to communicate. In the late 1990s and 2000s, ubiquitous computing and an Internet of Things became popular. === Commercial usage === In 1960, the commercial airline reservation system semi-automatic business research environment (SABRE) went online with two connected mainframes. In 1965, Western Electric introduced the first widely used telephone switch that implemented computer control in the switching fabric. In 1972, commercial services were first deployed on experimental public data networks in Europe. Public data networks in Europe, North America and Japan began using X.25 in the late 1970s and interconnected with X.75. This underlying infrastructure was used for expanding TCP/IP networks in the 1980s. In 1977, the first long-distance fiber network was deployed by GTE in Long Beach, California. == Hardware == === Network links === The transmission media used to link devices to form a computer network include electrical cable, optical fiber, and free space. In the OSI model, the software to handle the media is defined at layers 1 and 2 — the physical layer and the data link layer. Common examples of networking technologies include: Ethernet is a widely adopted family of networking technologies that use copper and fiber media in local area networks (LAN). The media and protocol standards that enable communication between networked devices over Ethernet are defined by IEEE 802.3. Wireless LAN standards, which use radio waves. Some standards use infrared signals as a transmission medium. Power line communication uses a building's power cabling to transmit

  Read more →
• 

  Social media use in education

  Social media in education is the use of social media to enhance education. Social media are "a group of Internet-based applications...that allow the creation and exchange of user-generated content". It is also known as the read/write web. As time went on and technology evolved, social media has been an integral part of people's lives, including students, scholars, and teachers. However, social media are controversial because, in addition to providing new means of connection, critics claim that they damage self-esteem, shorten attention spans, and increase mental health issues. A 2016 dissertation presented surveys that focused on the impact of social media. It reported that 54.6% of students believed that social media affected their studies positively (38% agree, 16.6% strongly agree). About 40% disagreed, and 4.7% of students strongly disagreed. 53% of female students reported that social media negatively impacted their studies. Among male students, 40% agreed that social media had a negative impact on studies, while 59% disagreed. A 2023 article dives deep into the rewards system of the brain in response to social media. This study compares the social rewards system in our brain to those from social media. From ages 10-12, most are receiving a cell phone, social rewards in the brain start to feel more satisfying. Leading to adulthood, the effects of social rewards are less likely to feel reliant on feedback from peers. Equivalent to a more mature prefrontal cortex, this enables a better management of their emotional reaction to these social rewards, meaning a more balanced and controlled reaction. == History == A survey from Cambridge International of nearly 20,000 teachers and students (ages 12–19) from 100 countries found that 48% of students use a desktop computer in class, 42% uses phones, 33% use interactive whiteboards and 20% use tablets. Desktop computers are more used than tablets. Teachers were abandoning the "no phones at school" rule. A 2024 research survey through Common Sense Education reported 54% of age 8-12 and 69% of ages 13-18 social media is an extensive distraction from homework. === United States === The long-running technology boom accelerated after the millennium. As of 2018, 95% of US teenage students had access to a smartphone and 45% said they were online almost constantly. In the early days of social media, access to technology was a significant issue as many students did not own not compatible devices and school budgets were often insufficient to purchase devices for student use. Despite backlash, Missouri passed a law that prohibited teachers from communicating privately with students over social media in 2011. Supporters were concerned that online communication between underage students and faculty could lead to inappropriate relationships. Some schools adopted a "Bring Your Own Device" (BYOD) policy, allowing students to bring Internet-accessing devices, such as phones or tablets to class. During the pandemic, the federal government offered funds that allowed more schools to purchase devices. Over time, more students acquired phones with social media access. Personal devices increased student satisfaction, but reduced teachers' ability to control device use in their classrooms. A 2018 Pew Research study reported that 95% of teenagers had a phone and used social media consistently. === Canada === The Peel District School Board (PDSB) in Ontario accepted the use of social media in the classroom. In 2013, the PDSB introduced BYOD and unblocked many social media sites. That was later replaced by a policy that dealt specifically with social media. == Uses == === Classroom === In the classroom, social media offers a way to systematically distribute and gather information from students. Teachers can supply documents, and audio/video media to students for immediate or later use. One study on higher education reported that devices and social media: created opportunities for interaction provided occasions for collaboration sped up information access offered more ways to learn situated learning. Frustrations included anti-technology instructors, device challenges, and devices as a distraction. Social media in classrooms can have a negative effect. A Yale University publication reported that students who used laptops in class for non-academic reasons had poorer performance. Students spent most of their time on social media, shopping, and other personal activities. Social media has helped many educators mentor their students more effectively. === Outside of class === Social media offer a venue for video calls, stories, feeds, and game playing that can enhance the learning process. Teachers can utilize social media to communicate with their students. Social media can provide students with resources that they can utilize in essays, projects, and presentations. Students can easily access comments made by teachers and peers and offer feedback to teachers. Social media can offer students the opportunity to collaborate by sharing information without requiring face to face meetings. Social media can allow students to more easily connect with experts, to go beyond course materials. Instructors in a 2010 study reported that online technologies (social media) can help students become comfortable having discussions outside the classroom better than traditional means. Teachers may face some risk when using social media outside the classroom, without appropriate work rules. Studies explores how college students' engagement with social media platforms influences their communication preferences and habits, particularly in relation to using school email for academic purposes. === Professional development === Social media can aid professional development, as teachers become students, enhancing knowledge transfer, skill master, and collaboration. === Non-academic uses === Schools can use social media to make public announcements. Teachers and administrators can communicate other important information to parents and students and to receive feedback from them. Families can keep up with school events and policies. === Ecology education === The potential of using social media in ecological, nature and forest education include: virtual nature groups can help promote good habits in forest tourism and recreation (nature ethics), by entering general rules in the regulations by administrators, e.g. "DO NOT PICK UP PLANTS UNKNOWN TO US", which is to protects rare species from pointless picking. social media activity motivates people to learn about nature in the field, allows them to gain knowledge, dispels popular myths, enables contact with scientists and practitioners, promotes valuable literature, websites, and at the same time reveals distortions and substantive errors in popular news services. contact is not only virtual. Despite financial barriers and distance, Internet users organize nature conventions. Such meetings are an opportunity not only to make friends, but also to learn about nature together and have fun. the possibility of contact between scientists and nature lovers via Facebook has become a source of cooperation in species inventory, e.g. the online campaign of the NATRIX Herpetological Society, which consists not only of collecting reports of observations of the smooth snake by Internet users, but also of drawing attention to the biology and threats to this species. Social media has become a place where ecology education quickly reaches people of different ages and social statuses. The nature groups that have been created, in which nature lovers, biologists, foresters and scientists participate, can have a real impact on the state of knowledge and data collection through citizen science. == Apps and services == Social media can allow students to participate in their field by working with organizations outside the classroom. By offering easier access to peers outside the classroom, students can broaden their perspectives and find support resources. Social media aided learning outside of the classroom through collaboration and innovation. One specific study, "Exploring education-related use of social media," called this "audience connectors". Audience connectors bring students together while studying with WhatsApp and Facebook. This study reported that "60 percent [of students in the study] agreed that technology changes education for the better." While social media can promote a beneficial education platform, downsides exist. Students may become skilled at "lifting material from the internet" rather than enhancing their personal understanding. Another downside is student attention spans decline. A concern raised by the students of this study showed how many use spell-check as a crutch and will see a trend of points taken off when spell-check is not an option. Apps like X allowed teachers to make classroom accounts where students can learn about social media in a controlled context. Teachers can post assignments on th

  Read more →
• 

  Attention (machine learning)

  In machine learning, attention is a method that determines the importance of each component in a sequence relative to the other components in that sequence. In natural language processing, importance is represented by "soft" weights assigned to each word in a sentence. More generally, attention encodes vectors called token embeddings across a fixed-width sequence that can range from tens to millions of tokens in size. Unlike "hard" weights, which are computed during the backwards training pass, "soft" weights exist only in the forward pass and therefore change with every step of the input. Earlier designs implemented the attention mechanism in a serial recurrent neural network (RNN) language translation system, but a more recent design, namely the transformer, removed the slower sequential RNN and relied more heavily on the faster parallel attention scheme. Inspired by ideas about attention in humans, the attention mechanism was developed to address the weaknesses of using information from the hidden layers of recurrent neural networks. Recurrent neural networks favor information contained in words at the end of a sentence and thus deemed more recent, thereby tending to attenuate the significance and associated predictive weight assigned to information earlier in the sentence. Attention allows a token equal access to any part of a sentence directly, rather than only through the previous state. == History == Additional surveys of the attention mechanism in deep learning are provided by Niu et al. and Soydaner. The major breakthrough came with self-attention, where each element in the input sequence attends to all others, enabling the model to capture global dependencies. This idea was central to the Transformer architecture, which replaced recurrence with attention mechanisms. As a result, Transformers became the foundation for models like BERT, T5 and generative pre-trained transformers (GPT). == Overview == The modern era of machine attention was revitalized by grafting an attention mechanism (Fig 1. orange) to an Encoder-Decoder. Figure 2 shows the internal step-by-step operation of the attention block (A) in Fig 1. === Interpreting attention weights === In translating between languages, alignment is the process of matching words from the source sentence to words of the translated sentence. Networks that perform verbatim translation without regard to word order would show the highest scores along the (dominant) diagonal of the matrix. The off-diagonal dominance shows that the attention mechanism is more nuanced. Consider an example of translating I love you to French. On the first pass through the decoder, 94% of the attention weight is on the first English word I, so the network offers the word je. On the second pass of the decoder, 88% of the attention weight is on the third English word you, so it offers t'. On the last pass, 95% of the attention weight is on the second English word love, so it offers aime. In the I love you example, the second word love is aligned with the third word aime. Stacking soft row vectors together for je, t', and aime yields an alignment matrix: Sometimes, alignment can be multiple-to-multiple. For example, the English phrase look it up corresponds to cherchez-le. Thus, "soft" attention weights work better than "hard" attention weights (setting one attention weight to 1, and the others to 0), as we would like the model to make a context vector consisting of a weighted sum of the hidden vectors, rather than "the best one", as there may not be a best hidden vector. == Variants == Many variants of attention implement soft weights, such as fast weight programmers, or fast weight controllers (1992). A "slow" neural network outputs the "fast" weights of another neural network through outer products. The slow network learns by gradient descent. It was later renamed as "linearized self-attention". Bahdanau-style attention, also referred to as additive attention, Luong-style attention, which is known as multiplicative attention, Early attention mechanisms similar to modern self-attention were proposed using recurrent neural networks. However, the highly parallelizable self-attention was introduced in 2017 and successfully used in the Transformer model, positional attention and factorized positional attention. For convolutional neural networks, attention mechanisms can be distinguished by the dimension on which they operate, namely: spatial attention, channel attention, or combinations. These variants recombine the encoder-side inputs to redistribute those effects to each target output. Often, a correlation-style matrix of dot products provides the re-weighting coefficients. In the figures below, W is the matrix of context attention weights, similar to the formula in Overview section above. == Optimizations == === Flash attention === The size of the attention matrix is proportional to the square of the number of input tokens. Therefore, when the input is long, calculating the attention matrix requires a lot of GPU memory. Flash attention is an implementation that reduces the memory needs and increases efficiency without sacrificing accuracy. It achieves this by partitioning the attention computation into smaller blocks that fit into the GPU's faster on-chip memory, reducing the need to store large intermediate matrices and thus lowering memory usage while increasing computational efficiency. === FlexAttention === FlexAttention is an attention kernel developed by Meta that allows users to modify attention scores prior to softmax and dynamically chooses the optimal attention algorithm. == Applications == Attention is widely used in natural language processing, computer vision, and speech recognition. In NLP, it improves context understanding in tasks like question answering and summarization. In vision, visual attention helps models focus on relevant image regions, enhancing object detection and image captioning. === Attention maps as explanations for vision transformers === From the original paper on vision transformers (ViT), visualizing attention scores as a heat map (called saliency maps or attention maps) has become an important and routine way to inspect the decision making process of ViT models. One can compute the attention maps with respect to any attention head at any layer, while the deeper layers tend to show more semantically meaningful visualization. Attention rollout is a recursive algorithm to combine attention scores across all layers, by computing the dot product of successive attention maps. Because vision transformers are typically trained in a self-supervised manner, attention maps are generally not class-sensitive. When a classification head is attached to the ViT backbone, class-discriminative attention maps (CDAM) combines attention maps and gradients with respect to the class [CLS] token. Some class-sensitive interpretability methods originally developed for convolutional neural networks can be also applied to ViT, such as GradCAM, which back-propagates the gradients to the outputs of the final attention layer. Using attention as basis of explanation for the transformers in language and vision is not without debate. While some pioneering papers analyzed and framed attention scores as explanations, higher attention scores do not always correlate with greater impact on model performances. == Mathematical representation == === Standard scaled dot-product attention === For matrices: Q ∈ R m × d k , K ∈ R n × d k {\displaystyle Q\in \mathbb {R} ^{m\times d_{k}},K\in \mathbb {R} ^{n\times d_{k}}} and V ∈ R n × d v {\displaystyle V\in \mathbb {R} ^{n\times d_{v}}} , the scaled dot-product, or QKV attention, is defined as: Attention ( Q , K , V ) = softmax ( Q K T d k ) V ∈ R m × d v {\displaystyle {\text{Attention}}(Q,K,V)={\text{softmax}}\left({\frac {QK^{T}}{\sqrt {d_{k}}}}\right)V\in \mathbb {R} ^{m\times d_{v}}} where T {\displaystyle {}^{T}} denotes transpose and the softmax function is applied independently to every row of its argument. The matrix Q {\displaystyle Q} contains m {\displaystyle m} queries, while matrices K , V {\displaystyle K,V} jointly contain an unordered set of n {\displaystyle n} key-value pairs. Value vectors in matrix V {\displaystyle V} are weighted using the weights resulting from the softmax operation, so that the rows of the m {\displaystyle m} -by- d v {\displaystyle d_{v}} output matrix are confined to the convex hull of the points in R d v {\displaystyle \mathbb {R} ^{d_{v}}} given by the rows of V {\displaystyle V} . To understand the permutation invariance and permutation equivariance properties of QKV attention, let A ∈ R m × m {\displaystyle A\in \mathbb {R} ^{m\times m}} and B ∈ R n × n {\displaystyle B\in \mathbb {R} ^{n\times n}} be permutation matrices; and D ∈ R m × n {\displaystyle D\in \mathbb {R} ^{m\times n}} an arbitrary matrix. The softmax function is permutation equivariant in the sense that: softmax ( A D B ) = A softmax ( D ) B {\displays

  Read more →
• 

  Web presence

  A web presence is a location on the World Wide Web where a person, business, or some other entity is represented (see also web property and point of presence). Examples of a web presence for a person could be a personal website, a blog, a profile page, a wiki page, or a social media point of presence (e.g. a LinkedIn profile, a Facebook account, or a Twitter account). Examples of a web presence for a business or some other entity could be a corporate website, a microsite, a page on a review site, a wiki page, or a social media point of presence (e.g., a LinkedIn company page and/or group, a Facebook business/brand/product page, or a Twitter account). Every web presence is associated with a unique web address to distinguish one point of presence from another. == Owned vs. unowned == Web presence can either be owned or unowned. Owned media exists when a single person or group can control the content that is published on its web presence (e.g. a corporate website or a personal Twitter account). However, when a single person or group cannot solely control the content, the creator is different from the owner. This is considered unowned media (see earned media). A Wikipedia page or a Yelp page about a person, company, or product would be an example of a known (or "earned") web presence. Occasionally, a first form of media known as "paid media" is often included in the discussion of media types: "earned vs. owned vs. paid". Paid media is commonly found in the form of advertisements, but it is not considered a form of web presence. == Management == Web presence management is the process of establishing and maintaining a digital footprint on the web. The three factors that are considered include the following: where a person or business has web presence; how each web presence represents its enterprise; and what is published at a point of presence. Web presence management is the discipline of determining and governing: the distribution of policy documents which platforms are most appropriate (e.g. internal vs. external blog, YouTube vs. Vimeo) the single inventory of personal or corporate web presence (e.g. partners or advocates) where on the web a business and any relatable assets are represented where on the web a business and any relatable assets are impersonated or pirated web properties with the particular entities they represent who has control over which web properties new web properties which are not in the personal or corporate inventory (e.g. someone creates a new presence) authorized and unauthorized changes to the creation (e.g. branding) of a web presence a workflow for creating a web property that follows its corporate standards === Management system === The purpose of a web presence management system is to manage the web presence of a person or business. This includes the collection of domain names, websites, social media, and other web pages where he, she, or it is being represented. The tool generally offers the following key functions: new presence discovery, inventory management, change detection, access control, stakeholder coordination, and compliance workflow. A web presence management system is meant to have a broader reach so that it emphasizes where a presence has been established, will be established, must be maintained, or must be remediated. An example of a web presence management system is the Brandle Presence Manager. In order to publish content to the various points of web presence, multiple content management systems and sometimes even social media management systems are often used. The primary focus of most content and social media management systems is limited to their specific web platforms. === Domain names === Another aspect of web presence management is managing the collection of domain names registered to the person or business. Any entity may register multiple domain names for the same property. As a result, they can link alternative spellings, different top-level domains, aliases, brands, or products to the same website. Similarly, negative or derogatory domain names may also be registered. This is done to prevent certain domain names from being used against the person or business. It is common for a larger business to have domain names registered by multiple employees at multiple domain name registrars, possibly a result of organizational or geographical requirements. Consequently, a web presence management system can be used to monitor all domain names registered by the business, regardless of the registrars used. == Discovery == Web presence discovery is the process of monitoring the web for a new point of presence about a person or business. Web presence discovery is often included in a web presence management system. Whether a new domain is registered, a new website is published, or a new social media account is established, it occurs outside of the person's or business’ control. As a result, its purpose is to assess a new point of presence and appropriately handle any violations. Web presence discovery differs from content listening. The former involves looking for new properties on the web, whereas the latter refers to analyzing content that already exists to hear how a person or business is seen often in near real time. Examples of content listening systems include Sysomos and Radian6, which is now a subsidiary of Salesforce.com. === Brand protection === A person or business may choose to watch for a new web presence that might appear to misrepresent or mislead an audience, such as counterfeiters, spoofers, or malicious hackers. One of the early software in the online brand protection marketplace was MarkMonitor, now part of Thomson Reuters. This software helped detect rogue domain names and websites. However, the modern day growth of social media has seen a rise in the number of fraudulent brand impersonations. It has become much easier for a new web presence to be created on those platforms, which results in a greater frequency of them today. As a preventive measure, online brand protection providers are now adding social media to their domain and website discovery options. === Security === The widespread growth of social media has also made it easier for unauthorized individuals to impersonate an employee. Consequently, social media has now become a recognized threat vector in that it can be used to socially engineer an attack on a business. To counter this, companies are able to use web presence monitoring tools to detect new points of presence on the web and thereby defend against socially engineered attacks. === Distributed inventory management === A web presence monitoring system can be used by a business to associate a new web property with its corporate inventory. It is designed to address autonomous, distributed behaviors. This usually applies to larger businesses whose geographically diverse employees are more prone to creating new points of presence on the web. For example, a retail chain may allow each local store to create and manage their web presence to market to and communicate with their local customer base. Similarly, a global business may have teams in each country or region who create and manage a web presence to adapt to local languages or cultures. == Monitoring == Web presence monitoring is the process of monitoring a known inventory of web presence to detect any changes that are made. Web presence monitoring is often included in a web presence management system and can serve multiple purposes for both larger corporations and certain individuals, such as celebrities. It is important to note that presence monitoring differs from content listening. The former involves monitoring the properties (e.g. branding) of a web property in an established inventory, whereas the latter refers to analyzing content that already exists to hear how a person or business is seen often in near real time. Additionally, presence monitoring focuses on owned media and content listening on earned media. === Corporate, brand, and regulatory compliance === Many companies ensure that certain standards are met for a property on the web that represents their business. For companies in regulated industries, such as finance and healthcare, the company may be required by law to ensure that all publicized content, regardless of platform or technology, follow specific requirements. The widespread growth of social media has seen a rise in the number of fraudulent corporate impersonations. It has become much easier for a new web presence to be created on these platforms, and so these are much more prevalent than they used to be. As a preventive measure, a web presence monitoring system alerts the company when a known property is changed, allowing for the property to be reviewed and amended so that it follows the proper standards. . A web presence monitoring system helps alert the company when a known property is changed, so it can be reviewed and brought back, if necessary, into compliance with the appro

  Read more →
• 

  Shorty Awards

  The Shorty Awards (also known as "The Shortys") are awards for outstanding and innovative work in digital and social media content by brands, advertising agencies, and creators. The awards, which generally focus on short-term content, honor achievements in content creation on Twitter, Facebook, YouTube, Instagram, TikTok, Twitch, and other social networking sites. The Shorty Awards began in 2008 and initially recognized achievements by independent creators on Twitter, with the first formal awards ceremony occurring in February 2009. Since then, the awards, which are now awarded each spring, have shifted their focus to recognize content across numerous platforms. Entrant work is judged on the merits of excellence in creativity, strategy, and engagement by the Real Time Academy, a group of industry professionals selected by the Shorty Awards on the basis of their professional reputations, industry knowledge, and personal achievements (which may include previous Shorty wins). An additional public voting component, known as Audience Honor Voting, is also used to select Shorty Awards contenders. Notable Shorty Award winners include Malala Yousafzai, Trevor Noah, Michelle Obama, Conan O’Brien, Lady Gaga, Bill Nye, Jacob Reed, and Lizzo. Brands and organizations such as Chipotle, Duolingo, Marvel Studios, HBO, Red Bull, Airbnb, Nestle, BMW, UNICEF and the Human Rights Campaign have also been awarded. The Shorty Awards also produces an annual award program called The Shorty Impact Awards, a competition dedicated to showcasing digital and social media-based projects by brands, agencies, and organizations that seek to make the world a better place. == List of ceremonies == == 1st Shorty Awards == The awards were created in 2008 by tech entrepreneurs Greg Galant, Adam Varga, and Lee Semel of Sawhorse Media. They invited Twitter account holders to nominate the best Twitter users in general categories such as humor, news, food, and design. Winners were chosen by more than 30,000 Twitter users during the voting period. The founders of Twitter first heard about the awards after the contest had gotten underway and expressed support for it. The first Shorty Awards ceremony was held on February 11, 2009, at the Galapagos Art Space in Brooklyn, New York. Approximately 300 people attended the event. The event was hosted by CNN anchor Rick Sanchez and featured appearances by prominent Twitter users MC Hammer and Gary Vaynerchuk and a video appearance by Shaquille O'Neal. The awards, in 26 categories, were voted on by Twitter users. == 2nd Shorty Awards == Voting for the second Shorty Awards opened in January 2010 in 26 official categories. A Real-Time Photo of the Year category was added to the list of official categories for the first time, recognizing the best photo posted to services such as Twitpic, Yfrog, or Facebook. The second Shorty Awards competition introduced a panel of judges called the Real-Time Academy of Short Form Arts & Sciences whose members were Craig Newmark, David Pogue, Kurt Andersen, Caterina Fake, Joi Ito, Frank Moss, Alberto Ibargüen, Sreenath Sreenivasan, MC Hammer, Alyssa Milano and Jimmy Wales. After public nominations determined the finalists, the academy decided on the winners. Winners were announced at a ceremony held in the Times Center in The New York Times building in Manhattan that was also streamed online. The ceremony was hosted by CNN anchor Rick Sanchez, who presented awards in the official categories as well as the newly added Real-Time Photo of the Year and a special humanitarian award. == 3rd Shorty Awards == The nomination period for the third annual Shorty Awards opened in January 2011 and ran through February 11, 2011, except for new categories that had extended nomination deadlines. There were 30 official categories and five special categories. In addition to Real-Time Photo of the Year, for the first time the awards accepted nominations for Foursquare Mayor of the Year, Foursquare Location of the Year, Microblog of the Year on Tumblr, and a Connecting People award. The awards also introduced new Shorty Industry Awards to recognize the best uses of social media by brands and agencies. Winners were announced at a ceremony on March 28, 2011, hosted by Aasif Mandvi in the Times Center. Other Shorty Awards presenters were scheduled to include Kiefer Sutherland, Jerry Stiller, Anne Meara, Stephen Wallem, Miss USA Rima Fakih, and Miss Teen USA Kamie Crawford. == 4th Shorty Awards == The 4th Annual Shorty Awards featured Ricky Gervais and Tiffani Thiessen. 1.6 million tweeted nominations were made across all the categories to honor the top users on Twitter, Facebook, Tumblr, Foursquare, YouTube and other internet platforms. == 5th Shorty Awards == The 5th Annual Shorty Awards ceremony featured Felicia Day, James Urbaniak, Kristian Nairn, Hannibal Buress, Carrie Keagan, Chris Hardwick, David Karp and Coco Rocha. 2.4 million tweeted nominations were made across all the categories to honor the top users on Twitter, Facebook, Tumblr, Foursquare, YouTube and other internet sites. == 6th Shorty Awards == The ceremony took place on April 7, 2014, at the New York TimesCenter and was hosted by Comedian Natasha Leggero. The show included appearances by Patton Oswalt, Jamie Oliver, Kristen Bell, Jerry Seinfeld, Moshe Kasher, Julie Klausner, Erin Brady, Guy Kawasaki, Matt Walsh, Retta, Us the Duo, Big Boi, Gilbert Gottfried, Thomas Middleditch, Billie Jean King and Leandra Medine. Winners included Jerry Seinfeld and Will Ferrell. == 7th Shorty Awards == The Seventh Annual Shorty Awards was hosted by comedian Rachel Dratch and took place on April 20, 2015, at The Times Center in NYC. The Real-Time Academy, the judging body of the Shortys, tripled in size for the 7th annual Awards and included Alton Brown, Mamrie Hart, Nikki Glaser, OK Go, The Fine Bros, Debbie Sterling, Dan Savage, Deena Varshavskaya and Palmer Luckey. Panic! at the Disco was the musical guest at the ceremony. On-stage presenters included Kevin Jonas, Bill Nye, Bella Thorne, Wyclef Jean, Emily Kinney and Tyler Oakley. == 8th Shorty Awards == The Eighth Annual Shorty Awards were held in NYC at the TimesCenter on April 11, 2016. They were hosted by YouTuber, Writer and Comedian Mamrie Hart with musical performances from Nico & Vinz. Winners of the night included Bill Wurtz, DJ Khaled, Misty Copeland, Casey Neistat, Dwayne Johnson, Hannah Hart, Troye Sivan, Baddie Winkle, Kevin Hart, Taraji P. Henson, King Bach, and Zach King. == 9th Shorty Awards == The Ninth Annual Shorty Awards were held in NYC at the PlayStation Theater on April 23, 2017. They were hosted by two-time Emmy Award winner Tony Hale with a musical performance by Lizzo. Winners of the night included Bill Nye, Shay Mitchell, Doug the Pug, Gigi Gorgeous, Simone Biles, Mara Wilson, Gaten Matarazzo and Chrissy Teigen. == 10th Shorty Awards == The 10th Annual Shorty Awards, took place on April 15, 2018, at the PlayStation Theater, New York City. The ceremony was hosted by actress, singer, and songwriter Keke Palmer with a musical performance by Betty Who. == 11th Shorty Awards == The 11th Annual Shorty Awards were held on May 5, 2019, in New York City at the PlayStation Theater. The ceremony was hosted by American actress and comedian Kathy Griffin, with a musical performance by Tank and the Bangas. == 12th Shorty Awards == The 12th Annual Shorty Awards were held on May 3, 2020. Due to the COVID-19 pandemic, the ceremony took place online for the first time, with presenters and award winners filming from their own homes. The ceremony was hosted by actor J.B. Smoove and featured a remixed performance of Trap Queen by Fetty Wap. Award winners included Jack Stauber, Supercar Blondie, Rose and Rosie, and Greta Thunberg. == 13th Shorty Awards == The 13th Annual Shorty Awards took place from April 26 to May 14, 2021. The ceremony was hosted on different social media platforms, such as Instagram and Clubhouse, to create a more tailored experience. Winners were announced from May 11 to May 14, with 10 winners being revealed each hour from 1 to 4 p.m. EST on the Shorty Awards Instagram account. == 14th Shorty Awards == The 14th Annual Shorty Awards were held virtually on May 15, 2022, honoring the best in social media and digital content. Hosted by Jay Shetty, the event recognized influencers, brands, and organizations across various categories, celebrating excellence in digital storytelling and innovative online campaigns. Notable winners included Tabitha Brown for her food content and the D'Amelio Family for their contributions to family and parenting content. The event highlighted the role of digital media in connecting and inspiring audiences during challenging times. == 15th Shorty Awards == The 15th Annual Shorty Awards celebrated the best in social media and digital content on May 24, 2023, at Tribeca 360° in New York City. Hosted by Jay Pharoah, the event honored creators, brands, and organizations ac

  Read more →