AI Generator Of Trump

AI Generator Of Trump — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Automated storage and retrieval system

  An automated storage and retrieval system (ASRS or AS/RS) consists of a variety of computer-controlled systems for automatically placing and retrieving loads from defined storage locations. Automated storage and retrieval systems (AS/RS) are typically used in applications where: There is a very high volume of loads being moved into and out of storage Storage density is important because of space constraints No value is added in this process (no processing, only storage and transport) Accuracy is critical because of potential expensive damages to the load An AS/RS can be used with standard loads as well as nonstandard loads, meaning that each standard load can fit in a uniformly-sized volume; for example, the film canisters in the image of the Defense Visual Information Center are each stored as part of the contents of the uniformly sized metal boxes, which are shown in the image. Standard loads simplify the handling of a request of an item. In addition, audits of the accuracy of the inventory of contents can be restricted to the contents of an individual metal box, rather than undergoing a top-to-bottom search of the entire facility, for a single item. They can also be used in self storage places. == Overview == AS/RS systems are designed for automated storage and retrieval of parts and items in manufacturing, distribution, retail, wholesale and institutions. They first originated in the 1960s, initially focusing on heavy pallet loads but with the evolution of the technology the handled loads have become smaller. The systems operate under computerized control, maintaining an inventory of stored items. Retrieval of items is accomplished by specifying the item type and quantity to be retrieved. The computer determines where in the storage area the item can be retrieved from and schedules the retrieval. It directs the proper automated storage and retrieval machine (SRM) to the location where the item is stored and directs the machine to deposit the item at a location where it is to be picked up. A system of conveyors and or automated guided vehicles is sometimes part of the AS/RS system. These take loads into and out of the storage area and move them to the manufacturing floor or loading docks. To store items, the pallet or tray is placed at an input station for the system, the information for inventory is entered into a computer terminal and the AS/RS system moves the load to the storage area, determines a suitable location for the item, and stores the load. As items are stored into or retrieved from the racks, the computer updates its inventory accordingly. The benefits of an AS/RS system include reduced labor for transporting items into and out of inventory, reduced inventory levels, more accurate tracking of inventory, and space savings. Items are often stored more densely than in systems where items are stored and retrieved manually. Within the storage, items can be placed on trays or hang from bars, which are attached to chains/drives in order to move up and down. The equipment required for an AS/RS include a storage & retrieval machine (SRM) that is used for rapid storage and retrieval of material. SRMs are used to move loads vertically or horizontally, and can also move laterally to place objects in the correct storage location. The trend towards Just In Time production often requires sub-pallet level availability of production inputs, and AS/RS is a much faster way of organizing the storage of smaller items next to production lines. The Material Handling Institute of America (MHIA), the non-profit trade association for the material handling world, and its members have categorised AS/RS into two primary segments: Fixed Aisle and Carousels/Vertical Lift Modules (VLMs). Both sets of technologies provide automated storage and retrieval for parts and items, but use different technologies. Each technology has its unique set of benefits and disadvantages. Fixed Aisle systems are characteristically larger systems whereas carousels and Vertical Lift Modules are used individually or grouped, but in small to medium-sized applications. A fixed-aisle AS/R machine (stacker crane) is one of two main designs: single-masted or double masted. Most are supported on a track and ceiling guided at the top by guide rails or channels to ensure accurate vertical alignment, although some are suspended from the ceiling. The 'shuttles' that make up the system travel between fixed storage shelves to deposit or retrieve a requested load (ranging from a single book in a library system to a several ton pallet of goods in a warehouse system). The entire unit moves horizontally within an aisle, while the shuttles are able to elevate up to the necessary height to reach the load, and can extend and retract to store or retrieve loads that are several positions deep in the shelving. A semi-automated system can be achieved by utilizing only specialized shuttles within an existing rack system. Another AS/RS technology is known as shuttle technology. In this technology the horizontal movement is made by independent shuttles each operating on one level of the rack while a lift at a fixed position within the rack is responsible for the vertical movement. By using two separate machines for these two axes the shuttle technology is able to provide higher throughput rates than stacker cranes. Storage and Retrieval Machines pick up or drop off loads to the rest of the supporting transportation system at specific stations, where inbound and outbound loads are precisely positioned for proper handling. In addition, there are several types of Automated Storage & Retrieval Systems (AS/RS) devices called Unit-load AS/RS, Mini-load AS/RS, Mid-Load AS/RS, Vertical Lift Modules (VLMs), Horizontal Carousels and Vertical Carousels. These systems are used either as stand-alone units or in integrated workstations called pods or systems. These units are usually integrated with various types of pick to light systems and use either a microprocessor controller for basic usage or inventory management software. These systems are ideal for increasing space utilization up to 90%, productivity levels by 90%, accuracy to 99.9%+ levels and throughput up to 750 lines per hour/per operator or more depending on the configuration of the system. == Horizontal carousels == Robotic Inserter/Extractor devices can be used for horizontal carousels. The robotic device is positioned in the front or rear of up to three horizontal carousels tiered high. The robot grabs the tote required in the order and often replenishes at the same time to speed up throughput. The tote(s) are then delivered to a conveyor, which routes it to a work station for picking or replenishing. Up to eight transactions per minute per unit can be done. Totes or containers up to 36" x 36" x 36" can be used in a system. On a simplistic level, horizontal carousels are also often used as "rotating shelving". With simple "fetch" command, items are brought to the operator and otherwise wasted space is eliminated. AS/RS Applications: Most applications of AS/RS technology have been associated with warehousing and distribution operations. An AS/RS can also be used to store raw materials and work in process in manufacturing. Three application areas can be distinguished for AS/RS: (1) Unit load storage and handling, (2) Order picking, and (3) Work in process storage. Unit load storage and retrieval applications are represented by unit load AS/RS and deep-lane storage systems. These kinds of applications are commonly found in warehousing for finishing goods in a distribution center, rarely in manufacturing. Deep-lane systems are used in the food industry. As described above, order picking involves retrieving materials in less than full unit load quantities. Minilpass, man-on board, and items retrieval systems are used for this second application area. Work in process storage is a more recent application of automated storage technology. While it is desirable to minimize the amount of work in process, WIP is unavoidable and must be effectively managed. Automated storage systems, either automated storage/retrieval systems or carousel systems, represent an efficient way to store materials between processing steps, particularly in batch and job shop production. In high production, work in process is often carried between operations by conveyor system, which this serve both storage and transport functions. === Inventory Category-specific AS/RS === Each inventory category—raw materials, work-in-process, and finished goods—requires its own specialized Automated Storage and Retrieval System (AS/RS). Particularly for work-in-process (WIP) inventories, due to variations in manufacturing processes, the AS/RS systems are significantly different in design and function, tailored specifically to match unique handling, storage, and retrieval requirements === Installed applications === Installed applications of this technology can be wide-ranging. In some librarie

  Read more →
• 

  Cryptographic Service Provider

  A cryptographic service provider (CSP) is a package that "provides a concrete implementation of certain cryptographic services." A CSP offers operations and protocols to support a variety of use cases. The cryptographic application programming interface (API) provided by the CSP provides common solutions for different platforms, for example hardware and cloud services. == Microsoft Windows == In Microsoft Windows, a Cryptographic Service Provider is a software library that implements the Microsoft CryptoAPI (CAPI). CSPs implement encoding and decoding functions, which computer application programs may use, for example, to implement strong user authentication or for secure email. CSPs are independent modules that can be used by different applications. A user program calls CryptoAPI functions and these are redirected to CSPs functions. Since CSPs are responsible for implementing cryptographic algorithms and standards, applications do not need to be concerned about security details. Furthermore, each application can define which CSP it is going to use on its calls to CryptoAPI. In fact, all cryptographic activity is implemented in CSPs. CryptoAPI only works as a bridge between the application and the CSP. CSPs are implemented basically as a special type of DLL with special restrictions on loading and use. Every CSP must be digitally signed by Microsoft and the signature is verified when Windows loads the CSP. In addition, after being loaded, Windows periodically re-scans the CSP to detect tampering, either by malicious software such as computer viruses or by the user him/herself trying to circumvent restrictions (for example on cryptographic key length) that might be built into the CSP's code. To obtain a signature, non-Microsoft CSP developers must supply paperwork to Microsoft promising to obey various legal restrictions and giving valid contact information. As of circa 2000, Microsoft did not charge any fees to supply these signatures. For development and testing purposes, a CSP developer can configure Windows to recognize the developer's own signatures instead of Microsoft's, but this is a somewhat complex and obscure operation unsuitable for nontechnical end users. The CAPI/CSP architecture had its origins in the era of restrictive US government controls on the export of cryptography. Microsoft's default or "base" CSP then included with Windows was limited to 512-bit RSA public-key cryptography and 40-bit symmetric cryptography, the maximum key lengths permitted in exportable mass market software at the time. CSPs implementing stronger cryptography were available only to U.S. residents, unless the CSPs themselves had received U.S. government export approval. The system of requiring CSPs to be signed only on presentation of completed paperwork was intended to prevent the easy spread of unauthorized CSPs implemented by anonymous or foreign developers. As such, it was presented as a concession made by Microsoft to the government, in order to get export approval for the CAPI itself. After the Bernstein v. United States court decision establishing computer source code as protected free speech and the transfer of cryptographic regulatory authority from the U.S. State Department to the more pro-export Commerce Department, the restrictions on key lengths were dropped, and the CSPs shipped with Windows now include full-strength cryptography. The main use of third-party CSPs is to interface with external cryptography hardware such as hardware security modules (HSM) or smart cards. === Smart Card CSP === These cryptographic functions can be realized by a smart card, thus the Smart Card CSP is the Microsoft way of a PKCS#11. Microsoft Windows is identifying the correct Smart Card CSP, which have to be used, analyzing the answer to reset (ATR) of the smart card, which is registered in the Windows Registry. Installing a new CSP, all ATRs of the supported smart cards are enlisted in the registry. === Use of CSP in MS Office password protection === Cryptographic service providers can be used for encryption of Word, Excel, and PowerPoint documents starting from Microsoft Office XP. A standard encryption algorithm with a 40-bit key is used by default, but enabling a CSP enhances key length and thus makes decryption process more continuous. This only applies to passwords that are required to open document because this password type is the only one that encrypts a password-protected document.

  Read more →
• 

  Social bot

  A social bot, refers to fully or partially automated social media accounts designed to perform most regular users’ actions, such as liking, posting content, and chatting with other users. Although their levels of autonomy vary, and often include a human-in-the-loop, social bots can use artificial intelligence to perform social media actions and can use large language models to mimic human dialogue. Social bots can operate alone or in groups that coordinate messaging as part of a network of coordinated inauthentic behavior. Social bots are often used to perform ad fraud by artificially boosting viewership and engagement metrics and to spread disinformation on social media. == Uses == Social bots are used for a large number of purposes on a variety of social media platforms, including Twitter, Instagram, Facebook, and YouTube. One common use of social bots is to inflate a social media user's apparent popularity, usually by artificially manipulating their engagement metrics with large volumes of fake likes, reposts, or replies. Social bots can similarly be used to artificially inflate a user's follower count with fake followers, creating a false perception of a larger and more influential online following than is the case. The use of social bots to create the impression of a large social media influence allows individuals, brands, and organizations to attract a higher number of human followers and boost their online presence. Fake engagement can be bought and sold in the black market of social media engagement. Corporations typically use automated customer service agents on social media to affordably manage high levels of support requests. Social bots are used to send automated responses to users’ questions, sometimes prompting the user to private message the support account with additional information. The increased use of automated support bots and virtual assistants has led to some companies laying off customer-service staff. Social bots are also often used to influence public opinion. Autonomous bot accounts can flood social media with large numbers of posts expressing support for certain products, companies, or political campaigns, creating the impression of organic grassroots support. This can create a false perception of the number of people who support a certain position, which may also have effects on the direction of stock prices or on elections. Messages with similar content can also influence fads or trends. Many social bots are also used to amplify phishing attacks. These malicious bots are used to trick a social media user into giving up their passwords or other personal data. This is usually accomplished by posting links claiming to direct users to news articles that would in actuality direct to malicious websites containing malware. Scammers often use URL shortening services such as TinyURL and bit.ly to disguise a link's domain address, increasing the likelihood of a user clicking the malicious link. The presence of fake social media followers and high levels of engagement help convince the victim that the scammer is in fact a trusted user. Social bots can be a tool for computational propaganda. Bots can also be used for algorithmic curation, algorithmic radicalization, and/or influence-for-hire, a term that refers to the selling of an account on social media platforms. == History == Bots have coexisted with computer technology since the earliest days of computing. Social bots have their roots in the 1950s with Alan Turing, whose work focused on machine intelligence with the development of the Turing Test. The following decades saw further progress made towards the goal of creating programs capable of mimicking human behavior, notably with Joseph Weizenbaum’s creation of ELIZA. Considered to be one of the first Chatbots, ELIZA could simulate natural conversations with human users through pattern matching. Its most famous script was DOCTOR, a simulation of a Rogerian psychotherapist that was programmed to chat with patients and respond to questions. With the growth of social media platforms in the early 2000s, these bots could be used to interact with much larger user groups in an inconspicuous manner. Early instances of autonomous agents on social media could be found on sites like MySpace, with social bots being used by marketing firms to inflate activity on a user’s page in an effort to make them appear more popular. Social bots have been observed on a large variety of social media websites, with Twitter being one of the most widely observed examples. The creation of Twitter bots is generally against the site’s terms of service when used to post spam or to automatically like and follow other users, but some degree of automation using Twitter’s API may be permitted if used for “entertainment, informational, or novelty purposes.” Other platforms such as Reddit and Discord also allow for the use of social bots as long as they are not used to violate policies regarding harmful content and abusive behavior. Social media platforms have developed their own automated tools to filter out messages that come from bots, although they cannot detect all bot messages. == Legal regulation == Due to the difficulty of recognizing social bots and separating them from "eligible" automation via social media APIs, it is unclear how legal regulation can be enforced. Social bots are expected to play a role in shaping public opinion by autonomously acting as influencers. Some social bots have been used to rapidly spread misinformation, manipulate stock markets, influence opinion on companies and brands, promote political campaigns, and engage in malicious phishing campaigns. In the United States, some states have started to implement legislation in an attempt to regulate the use of social bots. In 2019, California passed the Bolstering Online Transparency Act (the B.O.T. Act) to make it unlawful to use automated software to appear indistinguishable from humans for the purpose of influencing a social media user's purchasing and voting decisions. Other states such as Utah and Colorado have passed similar bills to restrict the use of social bots. The Artificial Intelligence Act (AI Act) in the European Union is the first comprehensive law governing the use of Artificial Intelligence. The law requires transparency in AI to prevent users from being tricked into believing they are communicating with another human. AI-generated content on social media must be clearly marked as such, preventing social bots from using AI in a manner that mimics human behavior. == Detection == The first generation of bots could sometimes be distinguished from real users by their often superhuman capacities to post messages. Later developments have succeeded in imprinting more "human" activity and behavioral patterns in the agent. With enough bots, it might be even possible to achieve artificial social proof. To unambiguously detect social bots as what they are, a variety of criteria must be applied together using pattern detection techniques, some of which are: cartoon figures as user pictures sometimes also random real user pictures are captured (identity fraud) reposting rate temporal patterns sentiment expression followers-to-friends ratio length of user names variability in (re)posted messages engagement rate (like/followers rate) analysis of the time series of social media posts Social bots are always becoming increasingly difficult to detect and understand. The bots' human-like behavior, ever-changing behavior of the bots, and the sheer volume of bots covering every platform may have been a factor in the challenges of removing them. Social media sites, like Twitter, are among the most affected, with CNBC reporting up to 48 million of the 319 million users (roughly 15%) were bots in 2017. Botometer (formerly BotOrNot) is a public Web service that checks the activity of a Twitter account and gives it a score based on how likely the account is to be a bot. The system leverages over a thousand features. An active method for detecting early spam bots was to set up honeypot accounts that post nonsensical content, which may get reposted (retweeted) by the bots. However, bots evolve quickly, and detection methods have to be updated constantly, because otherwise they may get useless after a few years. One method is the use of Benford's Law for predicting the frequency distribution of significant leading digits to detect malicious bots online. This study was first introduced at the University of Pretoria in 2020. Another method is artificial-intelligence-driven detection. Some of the sub-categories of this type of detection would be active learning loop flow, feature engineering, unsupervised learning, supervised learning, and correlation discovery. Some operations of bots work together in a synchronized way. For example, ISIS used Twitter to amplify its Islamic content by numerous orchestrated accounts which further pushed an item to the Hot List news, thus further a

  Read more →
• 

  Government Secure Intranet

  Government Secure Intranet (GSi) was a United Kingdom government wide area network, whose main purpose was to enable connected organisations to communicate electronically and securely at low protective marking levels. It was known for the '.gsi.gov.uk' family of domains for government email. Migration away from these domains began in 2019 and was completed in 2023. == History == === Use === Many UK government organisations used the GSi to transfer files on a peer-to-peer (P2P) basis between similarly accredited networks. The network itself was open within the context of its accreditation – it imposed no restrictions on traffic types carried across the network, restrictions and policy control were left to the connecting departments. Email traffic in and out of the network was filtered by an external provider. === Origin === The concept of GSi was defined by the Cabinet Office, and was turned into practical reality by the Internet Special Products group of Cable & Wireless (then known as Mercury Communications) at their Brentford premises. GSi development started late 1996, and can be roughly dated by checking the registration date of its first domain name, 'gsi.net', registered 30 May 1997. The formal go-live date was several months later (according to the Central Computer and Telecommunications Agency (CCTA) this was February 1998). The main drivers behind the development of GSi was the plethora of inter-agency connections in UK government which made managing security and connectivity budgets problematic. GSi not only provided better oversight, it also normalised connectivity. GSi was designed as an accredited, dual link connected Internet Protocol backbone, it imposed no restrictions on what type of traffic it carried; any restrictions were considered a policy decision for each connecting department. The design of GSi partly supported the then developing eGIF interoperability standards. This was a direct consequence of the two key technical people driving the project, one from Cable & Wireless, one from the UK government in the form of the CCTA. GSi used SMTP as mail transport protocol, and the conversion from the then prevalent X.400 email facilities to SMTP proved for many departments an improvement in reliability and speed. In the case of X.400, this conversion also cut email costs substantially as X.400 message conversions were still chargeable even if the conversion failed due to message size. In some cases, the ROI of such an email conversion was as short as two months. The creation of GSi handed Cable & Wireless a monopoly on UK government data connectivity. GSi can be considered one of the more successful UK government IT projects from the point of view of take up - even when still in pilot phase, demand increased to a point where service windows had to be imposed to continue building the platform to full strength. The development of GSi was also the root of the creation of the CESG Listed Adviser Scheme (CLAS). During the build of GSi, the need for accredited advisers became clear as advice on connectivity invariably involved discussing government confidential matters. CESG eventually responded with the above CLAS scheme. === Operations contract === GSi was operated on a five-year renewable contract basis. Energis won this contract from Cable & Wireless in August 2003. Cable & Wireless then bought Energis in 2005, thus regaining control over the platform. Cable and Wireless Worldwide won the GSi Convergence Framework (GCF) contract in 2011. The GSi and Managed Telecommunications Service (MTS) framework agreements finished in August 2011 with contracts running on to 12 February 2012. GCF is intended to facilitate the migration to the Public Services Network. === Previous developments === Government Connect went live across local authorities in England and Wales. Government Connect is a pan-government programme providing an accredited and secure network between central government and every local authority in England and Wales and allows exchange of RESTRICTED information between authorities. The GCSX network is part of the wider GSi and provides connectivity to nearly all central departments. Scottish local authorities have already established a similar network known as the Government Secure Extranet (GSX). Local authorities with a GCSX connection can now use a GCSX email account to exchange sensitive data, including DWP benefits data, patient identifiable data, with health sector staff who have a NHS.net email address, e.g. PCT staff and GPs. As both GCSX and the Police National Network (PNN) are both connected to the wider Government Secure Intranet (GSi), data can be transferred securely between local authorities and the Police. GC Mail can be used now to replace the existing less efficient and less secure methods of exchanging data between local authorities and the Police. Local authorities that deliver Housing and Council Tax benefits are taking part in the e-Transfers programme, which is e-enabling the process for delivery of Local Authority Input Documents (LAIDs) and Local Authority Claim Information (LACIs). Version 4.1 of the Code of Connection for compliance was introduced in 2010. Compared with version 3.2 the main Code of Connection version 4.1 areas of are: Mobile working - full implementation of compliant service Firewall specification (EAL 4) Execution of unauthorised software Requirement for IT Healthchecks (CHECK / CREST / TigerScheme) Labelling e-mails with protective markings. == Public Services Network == The Public Services Network is a UK Government programme that unified the provision of network infrastructure across the United Kingdom public sector into an interconnected "network of networks". This included large elements of GSi. It is now a legacy network. Centrally procured public sector networks migrated across to the PSN framework as they reached the end of their contract terms, either through an interim framework or directly. The Government Secure Intranet (GSi) contracts expired in September 2011, running on to 12 February 2012 and were replaced by the transitional Government Secure Intranet Convergence Framework (GCF).

  Read more →
• 

  Wumpus world

  Wumpus world is a simple world use in artificial intelligence for which to represent knowledge and to reason. Wumpus world was introduced by Michael Genesereth, and is discussed in the Russell-Norvig Artificial Intelligence book Artificial Intelligence: A Modern Approach. Wumpus World is loosely inspired by the 1972 video game Hunt the Wumpus. == Problem description == In Artificial Intelligence: A Modern Approach, the wumpus world features a 4x4 grid, containing a monster called a wumpus, multiple bottomless pits and hidden gold. The agent starts at (1,1) and has to find the gold and return to the starting position. The agent loses 1 point for every move and gains 1000 points for bringing the gold to the starting position. The agent can sense pits by a breeze, stench indicates a wumpus, and sparkle indicates gold. The wumpus can be killed by an arrow but costs 10 points.

  Read more →
• 

  Ciphertext

  In cryptography, ciphertext or cyphertext is the result of encryption performed on plaintext using an algorithm, called a cipher. Ciphertext is also known as encrypted or encoded information because it contains a form of the original plaintext that is unreadable by a human or computer without the proper cipher to decrypt it. This process prevents the loss of sensitive information via hacking. Decryption, the inverse of encryption, is the process of turning ciphertext into readable plaintext. Ciphertext is not to be confused with codetext, because the latter is a result of a code, not a cipher. == Conceptual underpinnings == Let m {\displaystyle m\!} be the plaintext message that Alice wants to secretly transmit to Bob and let E k {\displaystyle E_{k}\!} be the encryption cipher, where k {\displaystyle _{k}\!} is a cryptographic key. Alice must first transform the plaintext into ciphertext, c {\displaystyle c\!} , in order to securely send the message to Bob, as follows: c = E k ( m ) . {\displaystyle c=E_{k}(m).\!} In a symmetric-key system, Bob knows Alice's encryption key. Once the message is encrypted, Alice can safely transmit it to Bob (assuming no one else knows the key). In order to read Alice's message, Bob must decrypt the ciphertext using E k − 1 {\displaystyle {E_{k}}^{-1}\!} which is known as the decryption cipher, D k : {\displaystyle D_{k}:\!} D k ( c ) = D k ( E k ( m ) ) = m . {\displaystyle D_{k}(c)=D_{k}(E_{k}(m))=m.\!} Alternatively, in a non-symmetric key system, everyone, not just Alice and Bob, knows the encryption key; but the decryption key cannot be inferred from the encryption key. Only Bob knows the decryption key D k , {\displaystyle D_{k},} and decryption proceeds as D k ( c ) = m . {\displaystyle D_{k}(c)=m.} == Types of ciphers == The history of cryptography began thousands of years ago. Cryptography uses a variety of different types of encryption. Earlier algorithms were performed by hand and are substantially different from modern algorithms, which are generally executed by a machine. === Historical ciphers === Historical pen and paper ciphers used in the past are sometimes known as classical ciphers. They include: Substitution cipher: the units of plaintext are replaced with ciphertext (e.g., Caesar cipher and one-time pad) Polyalphabetic substitution cipher: a substitution cipher using multiple substitution alphabets (e.g., Vigenère cipher and Enigma machine) Polygraphic substitution cipher: the unit of substitution is a sequence of two or more letters rather than just one (e.g., Playfair cipher) Transposition cipher: the ciphertext is a permutation of the plaintext (e.g., rail fence cipher) Historical ciphers are not generally used as a standalone encryption technique because they are quite easy to crack. Many of the classical ciphers, with the exception of the one-time pad, can be cracked using brute force. === Modern ciphers === Modern ciphers are more secure than classical ciphers and are designed to withstand a wide range of attacks. An attacker should not be able to find the key used in a modern cipher, even if they know any specifics about the plaintext and its corresponding ciphertext. Modern encryption methods can be divided into the following categories: Private-key cryptography (symmetric key algorithm): one shared key is used for encryption and decryption Public-key cryptography (asymmetric key algorithm): two different keys are used for encryption and decryption In a symmetric key algorithm (e.g., DES, AES), the sender and receiver have a shared key established in advance: the sender uses the shared key to perform encryption; the receiver uses the shared key to perform decryption. Symmetric key algorithms can either be block ciphers or stream ciphers. Block ciphers operate on fixed-length groups of bits, called blocks, with an unvarying transformation. Stream ciphers encrypt plaintext digits one at a time on a continuous stream of data, with the transformation of successive digits varying during the encryption process. In an asymmetric key algorithm (e.g., RSA), there are two different keys: a public key and a private key. The public key is published, thereby allowing any sender to perform encryption. The private key is kept secret by the receiver, thereby allowing only the receiver to correctly perform decryption. == Cryptanalysis == Cryptanalysis (also referred to as codebreaking or cracking the code) is the study of applying various methodologies to obtain the meaning of encrypted information, without having access to the cipher required to correctly decrypt the information. This typically involves gaining an understanding of the system design and determining the cipher. Cryptanalysts can follow one or more attack models to crack a cipher, depending upon what information is available and the type of cipher being analyzed. Ciphertext is generally the most easily obtained part of a cryptosystem and therefore is an important part of cryptanalysis. === Attack models === Ciphertext-only: the cryptanalyst has access only to a collection of ciphertexts or code texts. This is the weakest attack model because the cryptanalyst has limited information. Modern ciphers rarely fail under this attack. Known-plaintext: the attacker has a set of ciphertexts to which they know the corresponding plaintext Chosen-plaintext attack: the attacker can obtain the ciphertexts corresponding to an arbitrary set of plaintexts of their own choosing Batch chosen-plaintext attack: where the cryptanalyst chooses all plaintexts before any of them are encrypted. This is often the meaning of an unqualified use of "chosen-plaintext attack". Adaptive chosen-plaintext attack: where the cryptanalyst makes a series of interactive queries, choosing subsequent plaintexts based on the information from the previous encryptions. Chosen-ciphertext attack: the attacker can obtain the plaintexts corresponding to an arbitrary set of ciphertexts of their own choosing Adaptive chosen-ciphertext attack Indifferent chosen-ciphertext attack Related-key attack: similar to a chosen-plaintext attack, except the attacker can obtain ciphertexts encrypted under two different keys. The keys are unknown, but the relationship between them is known (e.g., two keys that differ in the one bit). == Famous ciphertexts == The Babington Plot ciphers The Shugborough inscription The Zimmermann Telegram The Magic Words are Squeamish Ossifrage The cryptogram in "The Gold-Bug" Beale ciphers Kryptos Zodiac Killer ciphers

  Read more →
• 

  Content engineering

  Content engineering is a term applied to an engineering specialty dealing with the complexities around the use of content in computer-facilitated environments. Content authoring and production, content management, content modeling, content conversion, and content use and repurposing are all areas involving this practice. It is not a specialty with wide industry recognition and is often performed on an ad hoc basis by members of software development or content production or marketing staff, but is beginning to be recognized as a necessary function in any complex content-centric project involving both content production as well as software system development mainly involving content management systems (CMS) or digital experience platforms (DXP). Content engineering tends to bridge the gap between groups involved in the production of content (publishing and editorial staff, marketing, sales, human resources) and more technologically oriented departments such as software development, or IT that put this content to use in web or other software-based environments, and requires an understanding of the issues and processes of both sides. Typically, content engineering involves extensive use of embedded XML technologies, XML being the most widespread language for representing structured content. Content management systems are a key technology often used in the practice of content engineering. == Definition == Content engineering is the practice of organizing the shape and structure of content by deploying content and metadata models, in authoring and publishing processes in a manner that meets the requirements of an organization's Content Strategy, and its implementation through the use of technology such as CMS, XML, schema markup, artificial intelligence, APIs and others. == Purpose and goal == In very general terms, content engineering practices aim to maximize the ROI of content through content reuse and improving efficiency of content marketing, content operations, content strategy. Content engineering can help address content challenges that fairly typical organizations face: Siloed content supply chains Duplicate content in a myriad of formats Inefficient content authoring workflows Chunky, unstructured content Outdated technology Technology in place does not match needs Inability to reuse content across channels (multi-channel content) Metadata and schema are not used Lack of standards for metadata Lack of findability of content for internal and external use Poor SEO performance Inability to implement personalization == Key skills == Content engineering draws on a combination of technical, strategic, and editorial competencies. Practitioners typically require proficiency across several domains: === Content modeling and information architecture === Content engineers design structured content models that define how content is created, stored, and distributed. This includes building taxonomies, ontologies, and metadata schemas that enable content reuse across channels and platforms. === Structured content and markup languages === Proficiency in XML, JSON, HTML, and schema.org markup is fundamental. Content engineers use these languages to structure content for machine readability, search engine optimization, and interoperability between systems. === Content management systems and platforms === Content engineers require working knowledge of content management systems (CMS), digital experience platforms (DXP), and headless CMS architectures. This includes configuring content types, workflows, and publishing pipelines within these systems. === Workflow design and automation === Designing and implementing content workflows - from authoring through review, approval, and distribution - is a core function. Increasingly, this involves configuring AI-assisted and agentic workflows that automate research, drafting, repurposing, and distribution tasks at scale. === Content strategy and editorial understanding === Unlike purely technical roles, content engineering requires a working understanding of content strategy, brand management, editorial standards, and audience analysis. Content engineers must translate strategic objectives into technical content structures and system configurations. === API integration and data interoperability === Content engineers work with APIs to connect content systems, analytics platforms, distribution channels, and third-party services. Understanding how content flows between systems is essential for enabling multi-channel publishing and content personalization. === Analytics and performance measurement === Measuring content effectiveness through web analytics, SEO performance data, and engagement metrics informs how content engineers refine structures, metadata, and distribution workflows. == The role of a content engineer == Content engineers bridge the divide between content strategists and producers and the developers and content managers who publish and distribute content. But rather than simply wedging themselves between these players, content engineers help define and facilitate the content structure during the entire content strategy, production and distribution cycle from beginning to end. As the role has evolved, content engineers are increasingly expected to build and manage AI-powered content systems, moving beyond traditional CMS configuration into agentic workflows that automate content research, production, and distribution. By integrating skills in business and technology, content engineers do not see content as static or finished. Rather, they look at the value of the content and how it can best be adapted and personalized to serve customers and emerging content platforms, technologies, and opportunities. === Create customer experience === Content marketing suffers from two fundamental limitations that constrain the true power and potential that a great content marketing plan can bring to a business' bottom line: Content relevance: how to make content more relevant and personalized to their audiences. The marketer and content strategist direct the customer experience itself, and the content engineer makes it happen with content structure, schema, metadata, microdata, taxonomy, and CMS topology. Content agility: Marketers who are burdened with one-size-fits-all content remain stuck managing their content rather than their customers' experience. Content engineers give marketers the "super powers" to move content-powered experiences across interfaces and personalization variants. === Break down barriers === Empower content strategists: Content engineers work with content strategists by helping them connect content not as a fixed message, but as a modular construct which can be channeled and manipulated. Enable content producers: A content engineer will work with a content producer by helping to find new sources of content and ways the content can be combined and presented. Guide and free developers: The content engineer helps translate marketing strategy into clear technical needs and functions developers can build into content management systems Enhance content management: Develop content structures that make it easier for content writers and content managers to author to a single, very usable, interface for even complex content types that might contain dozens of elements. Engineer content for success: Content engineers help all members of a marketing team work more smoothly, with the support and structures needed to get the most out of the content they produce. === Salary benchmarks === Content engineering roles command significantly higher salaries than traditional content marketing positions. In the United States, IC-level content engineers earn between $120,000 and $165,000 annually, while senior roles reach $160,000 to $220,000. Head of content engineering positions range from $200,000 to $280,000, and VP-level roles can exceed $375,000. The emergence of dedicated content engineer job postings from companies such as Exit Five reflects the growing recognition of the role as a distinct function within marketing organizations.

  Read more →
• 

  KLJN Secure Key Exchange

  Random-resistor-random-temperature Kirchhoff-law-Johnson-noise key exchange, also known as RRRT-KLJN or simply KLJN, is an approach for distributing cryptographic keys between two parties that claims to offer unconditional security. This claim, which has been contested, is significant, as the only other key exchange approach claiming to offer unconditional security is Quantum key distribution. The KLJN secure key exchange scheme was proposed in 2005 by Laszlo Kish and Granqvist. It has the advantage over quantum key distribution in that it can be performed over a metallic wire with just four resistors, two noise generators, and four voltage measuring devices---equipment that is low-priced and can be readily manufactured. It has the disadvantage that several attacks against KLJN have been identified which must be defended against. "Given that the amount of effort and funding that goes into Quantum Cryptography is substantial (some even mock it as a distraction from the ultimate prize which is quantum computing), it seems to me that the fact that classic thermodynamic resources allow for similar inherent security should give one pause," wrote Henning Dekant, the founder of the Quantum Computing Meetup, in April 2013. The Cybersecurity Curricula 2017, a joint project of the Association for Computing Machinery, the IEEE Computer Society, the Association for Information Systems, and the International Federation for Information Processing Technical Committee on Information Security Education (IFIP WG 11.8) recommends teaching the KLJN Scheme as part of teaching "Advanced concepts" in its knowledge unit on cryptography. == See Also/Further Reading ==

  Read more →
• 

  Exercism

  Exercism is an online, open-source, free coding platform that offers code practice and mentorship on 77 different programming languages. == History == Software developer Katrina Owen created Exercism while she was teaching programming at Jumpstart Labs. The platform was developed as an internal tool to solve the problem of her own students not receiving feedback on the coding problems they were practicing. Katrina put the site publicly online and found that people were sharing it with their friends, practicing together and giving each other feedback. Within 12 months, the site had organically grown to see over 6,000 users had submitted code or feedback, and hundreds of volunteers contribute to the languages or tooling on the platform. In 2016, Jeremy Walker joined as co-founder and CEO. In July 2018, the site was relaunched with a new design and centered around a formal mentoring mode, at which point Katrina stepped back from day-to-day involvement. == Product == In the past, the website differed from other coding platforms by requiring students to download exercises through a command line client, solve the code on their own computers then submit the solution for feedback, at which point they can also view other's solutions to the same problem. Since its second relaunch in 2021, solutions can be edited and submitted through a web editor, though the command line client remains available. Exercism has tracks for 74 programming languages. Among the notable languages taught: ABAP, C, C#, C++, CoffeeScript, Delphi, Elm, Erlang, F#, Gleam, Go, Java, JavaScript, Julia, Kotlin, Objective-C, PHP, Python, Raku, Red, Ruby, Rust, Scala, Swift, and V (Vlang). In 2023, the site launched a "12 in 23" challenge for users to learn the basics of 12 different languages - one per month in 2023. == Open source == The Exercism codebase is open source. In April 2016, it consisted of 50 repositories including website code, API code, command-line code and, most of all, over 40 stand-alone repositories for different language tracks. As of February 2024 Exercism has 14,344 contributors, maintains 366 repositories, and 19,603 mentors.

  Read more →
• 

  Hardware random number generator

  In computing, a hardware random number generator (HRNG), true random number generator (TRNG), non-deterministic random bit generator (NRBG), or physical random number generator is a device that generates random numbers from a physical process capable of producing entropy, unlike a pseudorandom number generator (PRNG) that utilizes a deterministic algorithm and non-physical nondeterministic random bit generators that do not include hardware dedicated to generation of entropy. Many natural phenomena generate low-level, statistically random "noise" signals, including thermal and shot noise, jitter and metastability of electronic circuits, Brownian motion, and atmospheric noise. Researchers also used the photoelectric effect, involving a beam splitter, other quantum phenomena, and even nuclear decay (due to practical considerations the latter, as well as the atmospheric noise, is not viable except for fairly restricted applications or online distribution services). While "classical" (non-quantum) phenomena are not truly random, an unpredictable physical system is usually acceptable as a source of randomness, so the qualifiers "true" and "physical" are used interchangeably. A hardware random number generator is expected to output near-perfect random numbers ("full entropy"). A physical process usually does not have this property, and a practical TRNG typically includes a few blocks: a noise source that implements the physical process producing the entropy. Usually this process is analog, so a digitizer is used to convert the output of the analog source into a binary representation; a conditioner (randomness extractor) that improves the quality of the random bits; health tests. TRNGs are mostly used in cryptographical algorithms that get completely broken if the random numbers have low entropy, so the testing functionality is usually included. Hardware random number generators generally produce only a limited number of random bits per second. In order to increase the available output data rate, they are often used to generate the "seed" for a faster PRNG. PRNG also helps with the noise source "anonymization" (whitening out the noise source identifying characteristics) and entropy extraction. With a proper PRNG algorithm selected (cryptographically secure pseudorandom number generator, CSPRNG), the combination can satisfy the requirements of Federal Information Processing Standards and Common Criteria standards. == Uses == Hardware random number generators can be used in any application that needs randomness. However, in many scientific applications additional cost and complexity of a TRNG (when compared with pseudo random number generators) provide no meaningful benefits. TRNGs have additional drawbacks for data science and statistical applications: impossibility to re-run a series of numbers unless they are stored, reliance on an analog physical entity can obscure the failure of the source. The TRNGs therefore are primarily used in the applications where their unpredictability and the impossibility to re-run the sequence of numbers are crucial to the success of the implementation: in cryptography and gambling machines. === Cryptography === The major use for hardware random number generators is in the field of data encryption, for example to create random cryptographic keys and nonces needed to encrypt and sign data. In addition to randomness, there are at least two additional requirements imposed by the cryptographic applications: forward secrecy guarantees that the knowledge of the past output and internal state of the device should not enable the attacker to predict future data; backward secrecy protects the "opposite direction": knowledge of the output and internal state in the future should not divulge the preceding data. A typical way to fulfill these requirements is to use a TRNG to seed a cryptographically secure pseudorandom number generator. == History == Physical devices were used to generate random numbers for thousands of years, primarily for gambling. Dice in particular have been known for more than 5000 years (found on locations in modern Iraq and Iran), and flipping a coin (thus producing a random bit) dates at least to the times of ancient Rome. The first documented use of a physical random number generator for scientific purposes was by Francis Galton (1890). He devised a way to sample a probability distribution using a common gambling die. In addition to the top digit, Galton also looked at the face of a die closest to him, thus creating 64 = 24 outcomes (about 4.6 bits of randomness). Kendall and Babington-Smith (1938) used a fast-rotating 10-sector disk that was illuminated by periodic bursts of light. The sampling was done by a human who wrote the number under the light beam onto a pad. The device was utilized to produce a 100,000-digit random number table (at the time such tables were used for statistical experiments, like PRNG nowadays). On 29 April 1947, the RAND Corporation began generating random digits with an "electronic roulette wheel", consisting of a random frequency pulse source of about 100,000 pulses per second gated once per second with a constant frequency pulse and fed into a five-bit binary counter. Douglas Aircraft built the equipment, implementing Cecil Hasting's suggestion (RAND P-113) for a noise source (most likely the well known behavior of the 6D4 miniature gas thyratron tube, when placed in a magnetic field). Twenty of the 32 possible counter values were mapped onto the 10 decimal digits and the other 12 counter values were discarded. The results of a long run from the RAND machine, filtered and tested, were converted into a table, which originally existed only as a deck of punched cards, but was later published in 1955 as a book, 50 rows of 50 digits on each page (A Million Random Digits with 100,000 Normal Deviates). The RAND table was a significant breakthrough in delivering random numbers because such a large and carefully prepared table had never before been available. It has been a useful source for simulations, modeling, and for deriving the arbitrary constants in cryptographic algorithms to demonstrate that the constants had not been selected maliciously ("nothing up my sleeve numbers"). Since the early 1950s, research into TRNGs has been highly active, with thousands of research works published and about 2000 patents granted by 2017. == Physical phenomena with random properties == Multiple different TRNG designs were proposed over time with a large variety of noise sources and digitization techniques ("harvesting"). However, practical considerations (size, power, cost, performance, robustness) dictate the following desirable traits: use of a commonly available inexpensive silicon process; exclusive use of digital design techniques. This allows an easier system-on-chip integration and enables the use of FPGAs; compact and low-power design. This discourages use of analog components (e.g., amplifiers); mathematical justification of the entropy collection mechanisms. Stipčević & Koç in 2014 classified the physical phenomena used to implement TRNG into four groups: electrical noise; free-running oscillators; chaos; quantum effects. === Electrical noise-based RNG === Noise-based RNGs generally follow the same outline: the source of a noise generator is fed into a comparator. If the voltage is above threshold, the comparator output is 1, otherwise 0. The random bit value is latched using a flip-flop. Sources of noise vary and include: Johnson–Nyquist noise ("thermal noise"); Zener noise; avalanche breakdown. The drawbacks of using noise sources for an RNG design are: noise levels are hard to control, they vary with environmental changes and device-to-device; calibration processes needed to ensure a guaranteed amount of entropy are time-consuming; noise levels are typically low, thus the design requires power-hungry amplifiers. The sensitivity of amplifier inputs enables manipulation by an attacker; circuitry located nearby generates a lot of non-random noise thus lowering the entropy; a proof of randomness is near-impossible as multiple interacting physical processes are involved. === Chaos-based RNG === The idea of chaos-based noise stems from the use of a complex system that is hard to characterize by observing its behavior over time. For example, lasers can be put into (undesirable in other applications) chaos mode with chaotically fluctuating power, with power detected using a photodiode and sampled by a comparator. The design can be quite small, as all photonics elements can be integrated on-chip. Stipčević & Koç characterize this technique as "most objectionable", mostly due to the fact that chaotic behavior is usually controlled by a differential equation and no new randomness is introduced, thus there is a possibility of the chaos-based TRNG producing a limited subset of possible output strings. === Free-running oscillators-based RNG === The TRNGs based on a free-running oscilla

  Read more →
• 

  Computer network engineering

  Computer network engineering is a technology discipline within engineering that deals with the design, implementation, and management of computer networks. These systems contain both physical components, such as routers, switches, cables, and some logical elements, such as protocols and network services. Computer network engineers attempt to ensure that the data is transmitted efficiently, securely, and reliably over both local area networks (LANs) and wide area networks (WANs), as well as across the Internet. Computer networks often play a large role in modern industries ranging from telecommunications to cloud computing, enabling processes such as email and file sharing, as well as complex real-time services like video conferencing and online gaming. == Background == The evolution of network engineering is marked by significant milestones that have greatly impacted communication methods. These milestones particularly highlight the progress made in developing communication protocols that are vital to contemporary networking. This discipline originated in the 1960s with projects like ARPANET, which initiated important advancements in reliable data transmission. The advent of protocols such as TCP/IP revolutionized networking by enabling interoperability among various systems, which, in turn, fueled the rapid growth of the Internet. Key developments include the standardization of protocols and the shift towards increasingly complex layered architectures. These advancements have profoundly changed the way devices interact across global networks. == Network infrastructure design == The foundation of computer network engineering lies in the design of the network infrastructure. This involves planning both the physical layout of the network and its logical topology to ensure optimal data flow, reliability, and scalability. === Physical infrastructure === The physical infrastructure consists of the hardware used to transmit data, which is represented by the first layer of the OSI model. ==== Cabling ==== Copper cables such as ethernet over twisted pair are commonly used for short-distance connections, especially in local area networks (LANs), while fiber optic cables are favored for long-distance communication due to their high-speed transmission capabilities and lower susceptibility to interference. Fiber optics play a significant role in the backbone of large-scale networks, such as those used in data centers and internet service provider (ISP) infrastructures. ==== Wireless networks ==== In addition to wired connections, wireless networks have become a common component of physical infrastructure. These networks facilitate communication between devices without the need for physical cables, providing flexibility and mobility. Wireless technologies use a range of transmission methods, including radio frequency (RF) waves, infrared signals, and laser-based communication, allowing devices to connect to the network. Wi-Fi based on IEEE 802.11 standards is the most widely used wireless technology in local area networks and relies on RF waves to transmit data between devices and access points. Wireless networks operate across various frequency bands, including 2.4 GHz and 5 GHz, each offering unique ranges and data rates; the 2.4 GHz band provides broader coverage, while the 5 GHz band supports faster data rates with reduced interference, ideal for densely populated environments. Beyond Wi-Fi, other wireless transmission methods, such as infrared and laser-based communication, are used in specific contexts, like short-range, line-of-sight links or secure point-to-point communication. In mobile networks, cellular technologies like 3G, 4G, and 5G enable wide-area wireless connectivity. 3G introduced faster data rates for mobile browsing, while 4G significantly improved speed and capacity, supporting advanced applications like video streaming. The latest evolution, 5G, operates across a range of frequencies, including millimeter-wave bands, and provides high data rates, low latency, and support for more device connectivity, useful for applications like the Internet of Things (IoT) and autonomous systems. Together, these wireless technologies allow networks to meet a variety of connectivity needs across local and wide areas. ==== Network devices ==== Routers and switches help direct data traffic and assist in maintaining network security; network engineers configure these devices to optimize traffic flow and prevent network congestion. In wireless networks, wireless access points (WAP) allow devices to connect to the network. To expand coverage, multiple access points can be placed to create a wireless infrastructure. Beyond Wi-Fi, cellular network components like base stations and repeaters support connectivity in wide-area networks, while network controllers and firewalls manage traffic and enforce security policies. Together, these devices enable a secure, flexible, and scalable network architecture suitable for both local and wide-area coverage. === Logical topology === Beyond the physical infrastructure, a network must be organized logically, which defines how data is routed between devices. Various topologies, such as star, mesh, and hierarchical designs, are employed depending on the network’s requirements. In a star topology, for example, all devices are connected to a central hub that directs traffic. This configuration is relatively easy to manage and troubleshoot but can create a single point of failure. In contrast, a mesh topology, where each device is interconnected with several others, offers high redundancy and reliability but requires a more complex design and larger hardware investment. Large networks, especially those in enterprises, often employ a hierarchical model, dividing the network into core, distribution, and access layers to enhance scalability and performance. == Network protocols and communication standards == Communication protocols dictate how data in a network is transmitted, routed, and delivered. Depending on the goals of the specific network, protocols are selected to ensure that the network functions efficiently and securely. The Transmission Control Protocol/Internet Protocol (TCP/IP) suite is fundamental to modern computer networks, including the Internet. It defines how data is divided into packets, addressed, routed, and reassembled. The Internet Protocol (IP) is critical for routing packets between different networks. In addition to traditional protocols, advanced protocols such as Multiprotocol Label Switching (MPLS) and Segment Routing (SR) enhance traffic management and routing efficiency. For intra-domain routing, protocols like Open Shortest Path First (OSPF) and Enhanced Interior Gateway Routing Protocol (EIGRP) provide dynamic routing capabilities. On the local area network (LAN) level, protocols like Virtual Extensible LAN (VXLAN) and Network Virtualization using Generic Routing Encapsulation (NVGRE) facilitate the creation of virtual networks. Furthermore, Internet Protocol Security (IPsec) and Transport Layer Security (TLS) secure communication channels, ensuring data integrity and confidentiality. For real-time applications, protocols such as Real-time Transport Protocol (RTP) and WebRTC provide low-latency communication, making them suitable for video conferencing and streaming services. Additionally, protocols like QUIC enhance web performance and security by establishing secure connections with reduced latency. == Network security == As networks have become essential for business operations and personal communication, the demand for robust security measures has increased. Network security is a critical component of computer network engineering, concentrating on the protection of networks against unauthorized access, data breaches, and various cyber threats. Engineers are responsible for designing and implementing security measures that ensure the integrity and confidentiality of data transmitted across networks. Firewalls serve as barriers between trusted internal networks and external environments, such as the Internet. Network engineers configure firewalls, including next-generation firewalls (NGFW), which incorporate advanced features such as deep packet inspection and application awareness, thereby enabling more refined control over network traffic and protection against sophisticated attacks. In addition to firewalls, engineers use encryption protocols, including Internet Protocol Security (IPsec) and Transport Layer Security (TLS), to secure data in transit. These protocols provide a means of safeguarding sensitive information from interception and tampering. For secure remote access, Virtual Private Networks (VPNs) are deployed, using technologies to create encrypted tunnels for data transmission over public networks. These VPNs are often used for maintaining security when remote users access corporate networks but are also used ion other settings. To enhance threat detection and r

  Read more →
• 

  Strong cryptography

  Strong cryptography or cryptographically strong are general terms used to designate the cryptographic algorithms that, when used correctly, provide a very high (usually insurmountable) level of protection against any eavesdropper, including the government agencies. There is no precise definition of the boundary line between the strong cryptography and (breakable) weak cryptography, as this border constantly shifts due to improvements in hardware and cryptanalysis techniques. These improvements eventually place the capabilities once available only to the NSA within the reach of a skilled individual, so in practice there are only two levels of cryptographic security, "cryptography that will stop your kid sister from reading your files, and cryptography that will stop major governments from reading your files" (Bruce Schneier). The strong cryptography algorithms have high security strength, for practical purposes usually defined as a number of bits in the key. For example, the United States government, when dealing with export control of encryption, considered as of 1999 any implementation of the symmetric encryption algorithm with the key length above 56 bits or its public key equivalent to be strong and thus potentially a subject to the export licensing. To be strong, an algorithm needs to have a sufficiently long key and be free of known mathematical weaknesses, as exploitation of these effectively reduces the key size. At the beginning of the 21st century, the typical security strength of the strong symmetrical encryption algorithms is 128 bits (slightly lower values still can be strong, but usually there is little technical gain in using smaller key sizes). Demonstrating the resistance of any cryptographic scheme to attack is a complex matter, requiring extensive testing and reviews, preferably in a public forum. Good algorithms and protocols are required (similarly, good materials are required to construct a strong building), but good system design and implementation is needed as well: "it is possible to build a cryptographically weak system using strong algorithms and protocols" (just like the use of good materials in construction does not guarantee a solid structure). Many real-life systems turn out to be weak when the strong cryptography is not used properly, for example, random nonces are reused A successful attack might not even involve algorithm at all, for example, if the key is generated from a password, guessing a weak password is easy and does not depend on the strength of the cryptographic primitives. A user can become the weakest link in the overall picture, for example, by sharing passwords and hardware tokens with the colleagues. == Background == The level of expense required for strong cryptography originally restricted its use to the government and military agencies, until the middle of the 20th century the process of encryption required a lot of human labor and errors (preventing the decryption) were very common, so only a small share of written information could have been encrypted. US government, in particular, was able to keep a monopoly on the development and use of cryptography in the US into the 1960s. In the 1970, the increased availability of powerful computers and unclassified research breakthroughs (Data Encryption Standard, the Diffie-Hellman and RSA algorithms) made strong cryptography available for civilian use. Mid-1990s saw the worldwide proliferation of knowledge and tools for strong cryptography. By the 21st century the technical limitations were gone, although the majority of the communication were still unencrypted. At the same the cost of building and running systems with strong cryptography became roughly the same as the one for the weak cryptography. The use of computers changed the process of cryptanalysis, famously with Bletchley Park's Colossus. But just as the development of digital computers and electronics helped in cryptanalysis, it also made possible much more complex ciphers. It is typically the case that use of a quality cipher is very efficient, while breaking it requires an effort many orders of magnitude larger - making cryptanalysis so inefficient and impractical as to be effectively impossible. == Cryptographically strong algorithms == This term "cryptographically strong" is often used to describe an encryption algorithm, and implies, in comparison to some other algorithm (which is thus cryptographically weak), greater resistance to attack. But it can also be used to describe hashing and unique identifier and filename creation algorithms. See for example the description of the Microsoft .NET runtime library function Path.GetRandomFileName. In this usage, the term means "difficult to guess". An encryption algorithm is intended to be unbreakable (in which case it is as strong as it can ever be), but might be breakable (in which case it is as weak as it can ever be) so there is not, in principle, a continuum of strength as the idiom would seem to imply: Algorithm A is stronger than Algorithm B which is stronger than Algorithm C, and so on. The situation is made more complex, and less subsumable into a single strength metric, by the fact that there are many types of cryptanalytic attack and that any given algorithm is likely to force the attacker to do more work to break it when using one attack than another. There is only one known unbreakable cryptographic system, the one-time pad, which is not generally possible to use because of the difficulties involved in exchanging one-time pads without them being compromised. So any encryption algorithm can be compared to the perfect algorithm, the one-time pad. The usual sense in which this term is (loosely) used, is in reference to a particular attack, brute force key search — especially in explanations for newcomers to the field. Indeed, with this attack (always assuming keys to have been randomly chosen), there is a continuum of resistance depending on the length of the key used. But even so there are two major problems: many algorithms allow use of different length keys at different times, and any algorithm can forgo use of the full key length possible. Thus, Blowfish and RC5 are block cipher algorithms whose design specifically allowed for several key lengths, and who cannot therefore be said to have any particular strength with respect to brute force key search. Furthermore, US export regulations restrict key length for exportable cryptographic products and in several cases in the 1980s and 1990s (e.g., famously in the case of Lotus Notes' export approval) only partial keys were used, decreasing 'strength' against brute force attack for those (export) versions. More or less the same thing happened outside the US as well, as for example in the case of more than one of the cryptographic algorithms in the GSM cellular telephone standard. The term is commonly used to convey that some algorithm is suitable for some task in cryptography or information security, but also resists cryptanalysis and has no, or fewer, security weaknesses. Tasks are varied, and might include: generating randomness encrypting data providing a method to ensure data integrity Cryptographically strong would seem to mean that the described method has some kind of maturity, perhaps even approved for use against different kinds of systematic attacks in theory and/or practice. Indeed, that the method may resist those attacks long enough to protect the information carried (and what stands behind the information) for a useful length of time. But due to the complexity and subtlety of the field, neither is almost ever the case. Since such assurances are not actually available in real practice, sleight of hand in language which implies that they are will generally be misleading. There will always be uncertainty as advances (e.g., in cryptanalytic theory or merely affordable computer capacity) may reduce the effort needed to successfully use some attack method against an algorithm. In addition, actual use of cryptographic algorithms requires their encapsulation in a cryptosystem, and doing so often introduces vulnerabilities which are not due to faults in an algorithm. For example, essentially all algorithms require random choice of keys, and any cryptosystem which does not provide such keys will be subject to attack regardless of any attack resistant qualities of the encryption algorithm(s) used. == Legal issues == Widespread use of encryption increases the costs of surveillance, so the government policies aim to regulate the use of the strong cryptography. In the 2000s, the effect of encryption on the surveillance capabilities was limited by the ever-increasing share of communications going through the global social media platforms, that did not use the strong encryption and provided governments with the requested data. Murphy talks about a legislative balance that needs to be struck between the power of the government that are broad enough to be able to follow the qui

  Read more →
• 

  BeeSafe

  BeeSafe is a personal safety mobile app launched in 2015 as a Slovak startup. It is a location-based security service that notifies family members and friends in case the user of the app gets in danger. The app has received numerous awards. The app has more than 700 downloads and 250 active logins from more than 60 countries worldwide. == History == BeeSafe was founded on March 20, 2015 by Peter Stražovec and Michal Kačerík. The project was a winner of Žilina’s Startup Weekend 2013 and a StartupAwards.SK 2015 finalist. Later on, the app was released in the Android and iOS marketplace. The whole BeeSafe project was in The Spot booster and incubator in Bratislava for three months. BeeSafe entered into an agreement with the city of Piešťany in November 2015 to increase the security of its citizen by connecting the mobile app with the police platform. It is the first city that started using the BeeSafe platform. Further on, the application tries to help people in other Slovak cities. The cities can see the users only if they are in danger. == Awards == BeeSafe app received the Via Bona award, it is a winner of a Slovak startup and has other nominations too.

  Read more →
• 

  Airborne Networking

  An Airborne Network (AN) is the infrastructure owned by the United States Air Force that provides communication transport services through at least one node that is on a platform capable of flight. == Background == === Definition === The intent of the US Air Force's Airborne Network is to expand the Global Information Grid (GIG) to connect the three major domains of warfare: Air, Space, and Terrestrial. The Transformational Satellite Communications System network currently provides connectivity for all communication through space assets. The Combat Information Transport System and Theater Deployable Communications provide terrestrial connectivity for theatre based operations. The Airborne Network is engineered to utilize all airborne assets to connect with space and surface networks building a seamless communications platform across all domains. === Capabilities === The capabilities identified by this type of system are vastly beyond that of our current military. This system will enable the Air Force to provide a transportable network, flexible enough to communicate with any air, space, or ground asset in the area. The network will provide a beyond line-of-sight (LoS) communications infrastructure that can be packed up and moved in and out of the designated battlespace, enabling the military to have a reliable and secure communications network that extends globally. The network is designed to be flexible enough to provide the right communication and network packages for a specific region, mission, or technology. Operationally, The AN is designed to be self-forming, self-organizing, and self-generating, with nodes joining and leaving the network as they enter and exit a specific region. The network consists of dedicated tactical links, wideband air-to-air links, and ad hoc networks constructed by the Joint Tactical Radio System (JTRS) networking services. JTRS is a software-defined radio that will work with many existing military and civilian radios. It includes integrated encryption and Wideband Networking Software to create mobile ad hoc networks. It also provides system performance analysis and fault diagnostics automatically, reducing the demand for human intervention and network maintenance. === Intended Use === The AN was designed as the cornerstone for the new military doctrine known as Network Centric Warfare. This doctrine was developed to use information superiority to equip warfighters with more precise information enabling commanders and shooters to make smarter decisions faster. The AN contributes to Network Centric Warfare by enabling commanders to provide real-time information to warfighters in the air and on the ground. Warfighters can then utilize more information and make more educated decisions about how to act in a particular situation. Once the act has been carried out commanders will have immediate information about the result and can make judgments on how to continue. All-in-all the AN was designed to reduce the time necessary to identify a target, make clear and educated decisions to pull or not to pull the trigger, and assess battle == Topologies == There are four main network topologies that will be deployed and vary based on the placement of backbone and subnet class networks. === Space, Air, Ground Tether === Establishing a direct connection to another aircraft or ground node, via a point-to-point link for nodes within LOS or via a Satellite Communications (SATCOM) link for nodes that are beyond line-of-sight is known as tethering. SATCOM links provide connectivity to a network ground entry point. Strike aircraft that accompany C2 aircraft such as an AWACS are tethered via point-to-point links. Finally, C2 or intelligence, surveillance, and reconnaissnce (ISR) aircraft may connect via a LOS link directly to a network ground entry point. Each of these tethered alternatives works exactly like a hub or switch that has an entry point to a larger network and allows their connected users access to that network. === Flat Ad Hoc === A flat ad hoc topology refers to establishing nonpersistent network connections as needed among AN nodes that are present at a given time. With this network the nodes dynamically “discover” other nodes to which they can interconnect and form the network. The specific interconnections between the nodes are not planned in advance, but are made as opportunities arise. The nodes join and leave the network at will, continually changing connections to neighbor nodes based upon their location and mobility characteristics. === Tiered Ad Hoc === Ad hoc networks can be flat in the sense that all nodes are peers of each other in a single network, as discussed above, or they can dynamically organize themselves into hierarchical tiers such that higher tiers are used to move data between more localized subnets. This network topology can be compared to any conventional deployed network that utilizes routers, switches, and hubs to temporarily connect users. === Persistent Backbone === A network topology characterized by a persistent backbone is established using relatively persistent wideband connections among high-value platforms flying relatively stable orbits. It provides the connectivity between the tactical subnets which are considered edge networks relative to the backbone. This provides concentration points for connectivity to the space backbone as well as to terrestrial networks. This type of network topology is comparable to a conventional permanent network with established data trunks, routers, switches, and hubs to connect users. == Architecture == === Network Management === The platform management system enables operators to manage all on-board network elements. It interfaces and interoperates with the Airborne Network management system to enable operators to manage remote network elements in the airborne network. The network management system monitors the health of the network by passively testing the network for faults and latency. The system will also actively troubleshoot faults with probes to identify and isolate faulty connections, and enables operators to apply network parameters and security changes to all systems based on the status of the network. === Routing/Switching === Routing and switching enables data to be dynamically transmitted over the network to other nodes. Routing protocols must be able to identify nodes transmitted within their own platform and data to be sent to other platforms regardless of the current topology. The routing protocol must also provide seamless roaming by ensuring that no routed packets are lost when a node changes its point of attachment to the network. Maintaining scalability is important in routing as the network is constantly changing. The network must be able to function with numerous levels of platforms, varying numbers of fast moving platforms, and varying amounts of traffic per platform. Routers and switches will use metrics to determine the best paths to take when routing data. The routing protocol utilized for the AN will be an Adaptive Quality of Service routing protocol. === Gateways/Proxies === Gateways and proxies enable the connection numerous technology types regardless of age to communicate across the IP-based network. Gateways and proxies are essential in the operation of this network because so many different technologies are used to communicate in each domain. These systems will facilitate the transition of the legacy on-board infrastructure, transmission systems, tactical data link systems, and user applications to the objective airborne network systems. Therefore, they are only temporary until all platforms use a standardized IP radio for transmission. === Performance Enhancing Proxies === Performance Enhancing Proxies improve the performance of user applications running across the Airborne Network by countering wireless network impairments, such as limited bandwidth, long delays, high loss rates, and disruptions in network connections. Proxy systems are implemented between the user application and the network and can be used to improve performance at the application and transport functional layers of the OSI model. Some techniques that can be employed include: Compression: Data compression or header compression can be used to minimize the number of bits sent over the network. Data bundling: Smaller data packets can be combined (bundled) into a single large packet for transmission over the network. Caching: A local cache can be used to save and provide data objects that are requested multiple times, reducing transmissions over the network (and improving response times). Store and forward: Message queuing can be used to ensure message delivery to users who become disconnected from the network or are unable to connect to the network for a period of time. Once the platform connects, the stored messages are sent. Pipelining: Rather than opening several separate network connections pipelining can be used to share a single networ

  Read more →
• 

  Data lake

  A data lake is a system or repository of data stored in its natural/raw format, usually object blobs or files. A data lake is usually a single store of data including raw copies of source system data, sensor data, social data etc., and transformed data used for tasks such as reporting, visualization, advanced analytics, and machine learning. A data lake can include structured data from relational databases (rows and columns), semi-structured data (CSV, logs, XML, JSON), unstructured data (emails, documents, PDFs), and binary data (images, audio, video). A data lake can be established on premises (within an organization's data centers) or in the cloud (using cloud services). == Background == James Dixon, then chief technology officer at Pentaho, coined the term by 2011 to contrast it with data mart, which is a smaller repository of interesting attributes derived from raw data. In promoting data lakes, he argued that data marts have several inherent problems, such as information siloing. PricewaterhouseCoopers (PwC) said that data lakes could "put an end to data silos". In their study on data lakes, they noted that enterprises were "starting to extract and place data for analytics into a single, Hadoop-based repository." == Examples == Many companies use cloud storage services such as Google Cloud Storage and Amazon S3 or a distributed file system such as Apache Hadoop distributed file system (HDFS). There is a gradual academic interest in the concept of data lakes. For example, Personal DataLake at Cardiff University is a new type of data lake which aims at managing big data of individual users by providing a single point of collecting, organizing, and sharing personal data. Early data lakes, such as Hadoop 1.0, had limited capabilities because it only supported batch-oriented processing (Map Reduce). Interacting with it required expertise in Java, map reduce and higher-level tools like Apache Pig, Apache Spark and Apache Hive (which were also originally batch-oriented). == Criticism == Poorly managed data lakes have been facetiously called data swamps. In June 2015, David Needle characterized "so-called data lakes" as "one of the more controversial ways to manage big data". PwC was also careful to note in their research that not all data lake initiatives are successful. They quote Sean Martin, CTO of Cambridge Semantics: We see customers creating big data graveyards, dumping everything into Hadoop distributed file system (HDFS) and hoping to do something with it down the road. But then they just lose track of what’s there. The main challenge is not creating a data lake, but taking advantage of the opportunities it presents. They describe companies that build successful data lakes as gradually maturing their lake as they figure out which data and metadata are important to the organization. Another criticism is that the term data lake is used with many different meanings. It may be used to refer to, for example: any tools or data management practices that are not data warehouses; a particular technology for implementation; a raw data reservoir; a hub for ETL offload; or a central hub for self-service analytics. While critiques of data lakes are warranted, in many cases they apply to other data projects as well. For example, the definition of data warehouse is also changeable, and not all data warehouse efforts have been successful. In response to various critiques, McKinsey noted that the data lake should be viewed as a service model for delivering business value within the enterprise, not a technology outcome. == Data lakehouses == Data lakehouses are a hybrid approach that can ingest a variety of raw data formats like a data lake, while also providing ACID transactions and enforced data quality like a data warehouse.

  Read more →