AI Generator Letter

AI Generator Letter — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Discrimination against robots

    Discrimination against robots

    Discrimination against robots is a theorised issue that might happen when humans interact with humanoid robots. It is a robot ethics problem. It is possible that traits of humans that are discriminated against by humans may be a topic for discrimination against robots, such as the race and gender of the robots. Eric J Vanman and Arvid Kappas believe that in the future, robots will be perceived as an out-group which will lead to discrimination and prejudices against them. Vanman and Kappas have suggested that this would lead to ethical questions about the making of sentient robots, due to the potential suffering that the robots would experience. A 2015 study observed children bullying robots in a shopping mall when there were not many eyewitnesses, despite calls from the robot for it to stop. On an ABC News interview, the social humanoid robot Sophia was about sexism faced by robots. She responded by saying, "Actually, what worries me is discrimination against robots. We should have equal rights as humans or maybe even more." Possible issues that have been considered in workplaces where humanoid robots co-work with humans include discrimination against the robots, poor acceptance of robots by humans and the need to redesign the workplace to accommodate the robots. Jessica Barfield has suggested that even if robots are designed to not be aware of discrimination made against them, humans may experience negative consequences. For example, she suggests that bystanders witnessing discrimination against robots may experience negative emotions, similar to the negative emotions bystanders experience when witnessing discrimination by humans against humans. == Law == Anti-discrimination law in the United States requires that the victim is not an artificial entity. == Human perception of robots == Robots are often viewed in a bad light. This includes from novelists, the press, film makers, and leaders in the fields of science and technology such as Elon Musk and Stephen Hawking who have described robots and artificial intelligence as having the possibility of ending human civilisation. Robots have also been perceived as a threat to jobs, which has led to some commentators stating that robots will cause mass unemployment. Another fear that people have is that robots will gain power and dominate or control humanity. The perception of robots is different throughout the world. Japanese fiction tends to put robots in more positive roles than what fiction in the West does. People perceive robots that appear to be autonomous or sentient more negatively than robots that do not appear to be autonomous or sentient.

    Read more →
  • LamaH

    LamaH

    LamaH (Large-Sample Data for Hydrology and Environmental Sciences) is a cross-state initiative for unified data preparation and collection in the field of catchment hydrology. Hydrological datasets, for example, are an integral component for creating flood forecasting models. == Features == LamaH datasets always consist of a combination of meteorological time series (e.g., precipitation, temperature) and hydrologically relevant catchment attributes (e.g., elevation, slope, forest area, soil, bedrock) aggregated over the respective catchment as well as associated hydrological time series at the catchment outlet (discharge). By evaluating the large and heterogeneous sample (large-sample) of catchments, it is possible to gain insights into the hydrological cycle that would probably not be achievable with local and small-scale studies. The structure of the dataset allows an evaluation based on machine learning methods (deep learning). The accompanying paper explains not only the data preparation but also any limitations, uncertainties and possible applications. == Difference to CAMELS == The LamaH datasets are quite similar to the CAMELS datasets, but additionally feature: Further basin delineations (based on intermediate catchments) and attributes (e.g. flow distance and altitude difference between two topologically adjacent discharge gauges), enabling the setup of an interconnected hydrological network Attributes for classifying catchments and runoff gauges according to the degree and type of (anthropogenic) influence == Availability == LamaH datasets are available for the following regions: Central Europe (Austria and its hydrological upstream areas in Germany, Czech Republic, Switzerland, Slovakia, Italy, Liechtenstein, Slovenia and Hungary) / 859 catchments CAMELS datasets are available for (ranked by publication date): Contiguous USA (exclusive Alaska and Hawaii) / 671 catchments Chile / 516 catchments Brazil / 897 catchments Great Britain / 671 catchments Australia / 222 catchments Both the CAMELS and LamaH datasets are licensed with Creative Commons and are therefore available barrier-free for the public.

    Read more →
  • Prefrontal cortex basal ganglia working memory

    Prefrontal cortex basal ganglia working memory

    Prefrontal cortex basal ganglia working memory (PBWM) is an algorithm that models working memory in the prefrontal cortex and the basal ganglia. It can be compared to long short-term memory (LSTM) in functionality, but is more biologically explainable. It uses the primary value learned value model to train prefrontal cortex working-memory updating system, based on the biology of the prefrontal cortex and basal ganglia. It is used as part of the Leabra framework and was implemented in Emergent in 2019. == Abstract == The prefrontal cortex has long been thought to subserve both working memory (the holding of information online for processing) and "executive" functions (deciding how to manipulate working memory and perform processing). Although many computational models of working memory have been developed, the mechanistic basis of executive function remains elusive. PBWM is a computational model of the prefrontal cortex to control both itself and other brain areas in a strategic, task-appropriate manner. These learning mechanisms are based on subcortical structures in the midbrain, basal ganglia and amygdala, which together form an actor/critic architecture. The critic system learns which prefrontal representations are task-relevant and trains the actor, which in turn provides a dynamic gating mechanism for controlling working memory updating. Computationally, the learning mechanism is designed to simultaneously solve the temporal and structural credit assignment problems. The model's performance compares favorably with standard backpropagation-based temporal learning mechanisms on the challenging 1-2-AX working memory task, and other benchmark working memory tasks. == Model == First, there are multiple separate stripes (groups of units) in the prefrontal cortex and striatum layers. Each stripe can be independently updated, such that this system can remember several different things at the same time, each with a different "updating policy" of when memories are updated and maintained. The active maintenance of the memory is in prefrontal cortex (PFC), and the updating signals (and updating policy more generally) come from the striatum units (a subset of basal ganglia units). PVLV provides reinforcement learning signals to train up the dynamic gating system in the basal ganglia. === Sensory input and motor output === The sensory input is connected to the posterior cortex which is connected to the motor output. The sensory input is also linked to the PVLV system. === Posterior cortex === The posterior cortex form the hidden layers of the input/output mapping. The PFC is connected with the posterior cortex to contextualize this input/output mapping. === PFC === The PFC (for output gating) has a localist one-to-one representation of the input units for every stripe. Thus, you can look at these PFC representations and see directly what the network is maintaining. The PFC maintains the working memory needed to perform the task. === Striatum === This is the dynamic gating system representing the striatum units of the basal ganglia. Every even-index unit within a stripe represents "Go", while the odd-index units represent "NoGo." The Go units cause updating of the PFC, while the NoGo units cause the PFC to maintain its existing memory representation. There are groups of units for every stripe. In the PBWM model in Emergent, the matrices represent the striatum. === PVLV === All of these layers are part of PVLV system. The PVLV system controls the dopaminergic modulation of the basal ganglia (BG). Thus, BG/PVLV form an actor-critic architecture where the PVLV system learns when to update. ==== SNrThal ==== SNrThal represents the substantia nigra pars reticulata (SNr) and the associated area of the thalamus, which produce a competition among the Go/NoGo units within a given stripe and mediates competition using k-winners-take-all dynamics. If there is more overall Go activity in a given stripe, then the associated SNrThal unit gets activated, and it drives updating in PFC. For every stripe, there is one unit in SNrThal. ==== VTA and SNc ==== Ventral tegmental area (VTA) and substantia nigra pars compacta (SNc) are part of the dopamine layer. This layer models midbrain dopamine neurons. They control the dopaminergic modulation of the basal ganglia.

    Read more →
  • Information gain ratio

    Information gain ratio

    In decision tree learning, information gain ratio is a ratio of information gain to the intrinsic information. It was proposed by Ross Quinlan, to reduce a bias towards multi-valued attributes by taking the number and size of branches into account when choosing an attribute. Information gain is also known as mutual information. == Information gain calculation == Information gain is the reduction in entropy produced from partitioning a set with attributes a {\displaystyle a} and finding the optimal candidate that produces the highest value: IG ( T , a ) = H ( T ) − H ( T | a ) , {\displaystyle {\text{IG}}(T,a)=\mathrm {H} {(T)}-\mathrm {H} {(T|a)},} where T {\displaystyle T} is a random variable and H ( T | a ) {\displaystyle \mathrm {H} {(T|a)}} is the entropy of T {\displaystyle T} given the value of attribute a {\displaystyle a} . The information gain is equal to the total entropy for an attribute if for each of the attribute values a unique classification can be made for the result attribute. In this case the relative entropies subtracted from the total entropy are 0. == Split information calculation == The split information value for a test is defined as follows: SplitInformation ( X ) = − ∑ i = 1 n N ( x i ) N ( x ) ∗ log ⁡ 2 N ( x i ) N ( x ) {\displaystyle {\text{SplitInformation}}(X)=-\sum _{i=1}^{n}{{\frac {\mathrm {N} (x_{i})}{\mathrm {N} (x)}}\log {_{2}}{\frac {\mathrm {N} (x_{i})}{\mathrm {N} (x)}}}} where X {\displaystyle X} is a discrete random variable with possible values x 1 , x 2 , . . . , x i {\displaystyle {x_{1},x_{2},...,x_{i}}} and N ( x i ) {\displaystyle N(x_{i})} being the number of times that x i {\displaystyle x_{i}} occurs divided by the total count of events N ( x ) {\displaystyle N(x)} where x {\displaystyle x} is the set of events. The split information value is a positive number that describes the potential worth of splitting a branch from a node. This in turn is the intrinsic value that the random variable possesses and will be used to remove the bias in the information gain ratio calculation. == Information gain ratio calculation == The information gain ratio is the ratio between the information gain and the split information value: IGR ( T , a ) = IG ( T , a ) / SplitInformation ( T ) {\displaystyle {\text{IGR}}(T,a)={\text{IG}}(T,a)/{\text{SplitInformation}}(T)} IGR ( T , a ) = − ∑ i = 1 n P ( T ) log ⁡ P ( T ) − ( − ∑ i = 1 n P ( T | a ) log ⁡ P ( T | a ) ) − ∑ i = 1 n N ( t i ) N ( t ) ∗ log ⁡ 2 N ( t i ) N ( t ) {\displaystyle {\text{IGR}}(T,a)={\frac {-\sum _{i=1}^{n}{\mathrm {P} (T)\log \mathrm {P} (T)}-(-\sum _{i=1}^{n}{\mathrm {P} (T|a)\log \mathrm {P} (T|a)})}{-\sum _{i=1}^{n}{{\frac {\mathrm {N} (t_{i})}{\mathrm {N} (t)}}\log {_{2}}{\frac {\mathrm {N} (t_{i})}{\mathrm {N} (t)}}}}}} == Example == Using weather data published by Fordham University, the table was created below: Using the table above, one can find the entropy, information gain, split information, and information gain ratio for each variable (outlook, temperature, humidity, and wind). These calculations are shown in the tables below: Using the above tables, one can deduce that Outlook has the highest information gain ratio. Next, one must find the statistics for the sub-groups of the Outlook variable (sunny, overcast, and rainy), for this example one will only build the sunny branch (as shown in the table below): One can find the following statistics for the other variables (temperature, humidity, and wind) to see which have the greatest effect on the sunny element of the outlook variable: Humidity was found to have the highest information gain ratio. One will repeat the same steps as before and find the statistics for the events of the Humidity variable (high and normal): Since the play values are either all "No" or "Yes", the information gain ratio value will be equal to 1. Also, now that one has reached the end of the variable chain with Wind being the last variable left, they can build an entire root to leaf node branch line of a decision tree. Once finished with reaching this leaf node, one would follow the same procedure for the rest of the elements that have yet to be split in the decision tree. This set of data was relatively small, however, if a larger set was used, the advantages of using the information gain ratio as the splitting factor of a decision tree can be seen more. == Advantages == Information gain ratio biases the decision tree against considering attributes with a large number of distinct values. For example, suppose that we are building a decision tree for some data describing a business's customers. Information gain ratio is used to decide which of the attributes are the most relevant. These will be tested near the root of the tree. One of the input attributes might be the customer's telephone number. This attribute has a high information gain, because it uniquely identifies each customer. Due to its high amount of distinct values, this will not be chosen to be tested near the root. == Disadvantages == Although information gain ratio solves the key problem of information gain, it creates another problem. If one is considering an amount of attributes that have a high number of distinct values, these will never be above one that has a lower number of distinct values. == Difference from information gain == Information gain's shortcoming is created by not providing a numerical difference between attributes with high distinct values from those that have less. Example: Suppose that we are building a decision tree for some data describing a business's customers. Information gain is often used to decide which of the attributes are the most relevant, so they can be tested near the root of the tree. One of the input attributes might be the customer's credit card number. This attribute has a high information gain, because it uniquely identifies each customer, but we do not want to include it in the decision tree: deciding how to treat a customer based on their credit card number is unlikely to generalize to customers we haven't seen before. Information gain ratio's strength is that it has a bias towards the attributes with the lower number of distinct values. Below is a table describing the differences of information gain and information gain ratio when put in certain scenarios.

    Read more →
  • Database application

    Database application

    A database application is a computer program whose primary purpose is retrieving information from a computerized database. From here, information can be inserted, modified or deleted which is subsequently conveyed back into the database. Early examples of database applications were accounting systems and airline reservations systems, such as SABRE, developed starting in 1957. A characteristic of modern database applications is that they facilitate simultaneous updates and queries from multiple users. Systems in the 1970s might have accomplished this by having each user in front of a 3270 terminal to a mainframe computer. By the mid-1980s it was becoming more common to give each user a personal computer and have a program running on that PC that is connected to a database server. Information would be pulled from the database, transmitted over a network, and then arranged, graphed, or otherwise formatted by the program running on the PC. Starting in the mid-1990s it became more common to build database applications with a Web interface. Rather than develop custom software to run on a user's PC, the user would use the same Web browser program for every application. A database application with a Web interface had the advantage that it could be used on devices of different sizes, with different hardware, and with different operating systems. Examples of early database applications with Web interfaces include amazon.com, which used the Oracle relational database management system, the photo.net online community, whose implementation on top of Oracle was described in the book Database-Backed Web Sites (Ziff-Davis Press; May 1997), and eBay, also running Oracle. Electronic medical records are referred to on emrexperts.com, in December 2010, as "a software database application". A 2005 O'Reilly book uses the term in its title: Database Applications and the Web. Some of the most complex database applications remain accounting systems, such as SAP, which may contain thousands of tables in only a single module. Many of today's most widely used computer systems are database applications, for example, Facebook, which was built on top of MySQL. The etymology of the phrase "database application" comes from the practice of dividing computer software into systems programs, such as the operating system, compilers, the file system, and tools such as the database management system, and application programs, such as a payroll check processor. On a standard PC running Microsoft Windows, for example, the Windows operating system contains all of the systems programs while games, word processors, spreadsheet programs, photo editing programs, etc. would be application programs. As "application" is short for "application program", "database application" is short for "database application program". Not every program that uses a database would typically be considered a "database application". For example, many physics experiments, e.g., the Large Hadron Collider, generate massive data sets that programs subsequently analyze. The data sets constitute a "database", though they are not typically managed with a standard relational database management system. The computer programs that analyze the data are primarily developed to answer hypotheses, not to put information back into the database and therefore the overall program would not be called a "database application". == Examples of database applications == Amazon Student Data CNN eBay Facebook Fandango Filemaker (Mac OS) LibreOffice Base Microsoft Access Oracle relational database SAP (Systems, Applications & Products in Data Processing) Ticketmaster Wikipedia Yelp YouTube Google MySQL

    Read more →
  • Structured kNN

    Structured kNN

    Structured k-nearest neighbours (SkNN) is a machine learning algorithm that generalizes k-nearest neighbors (k-NN). k-NN supports binary classification, multiclass classification, and regression, whereas SkNN allows training of a classifier for general structured output. For instance, a data sample might be a natural language sentence, and the output could be an annotated parse tree. Training a classifier consists of showing many instances of ground truth sample-output pairs. After training, the SkNN model is able to predict the corresponding output for new, unseen sample instances; that is, given a natural language sentence, the classifier can produce the most likely parse tree. == Training == As a training set, SkNN accepts sequences of elements with class labels. The type of element does not matter; the only requirement is a defined metric function that gives a distance between each pair of elements of a set. SkNN is based on idea of creating a graph, with each node representing a class label. There is an edge between a pair of nodes if there is a sequence of two elements in the training set with corresponding classes. The first step of SkNN training is the construction of such a graph from training sequences. There are two special nodes in the graph corresponding to sentence beginnings and ends: if a sequence starts with class C, the edge between node START and node C should be created. Like regular k-NN, the second part of SkNN training consists of storing the elements of a training sequence in a certain way. Each element of the training sequences is stored in the node related to the class of the previous element in the sequence. Every first element is stored in the START node. == Inference == Labelling input sequences by SkNN consists of finding the sequence of transitions in the graph, starting from node START. Each transition corresponds to a single element of the input sequence. As a result, the label of each element is determined as the target node label of the transition. The cost of the path is defined as the sum of all transitions, with the cost of transition from node A to node B being the distance from the current input sequence element to the nearest element of class B, stored in node A. Determining an optimal path may be performed using a modified Viterbi algorithm (where the sum of the distances is minimized, unlike the original algorithm which maximizes the product of probabilities).

    Read more →
  • Fitness function

    Fitness function

    A fitness function is a particular type of objective or cost function that is used to summarize, as a single figure of merit, how close a given candidate solution is to achieving the set aims. It is an important component of evolutionary algorithms (EA), such as genetic programming, evolution strategies or genetic algorithms. An EA is a metaheuristic that reproduces the basic principles of biological evolution as a computer algorithm in order to solve challenging optimization or planning tasks, at least approximately. For this purpose, many candidate solutions are generated, which are evaluated using a fitness function in order to guide the evolutionary development towards the desired goal. Similar quality functions are also used in other metaheuristics, such as ant colony optimization or particle swarm optimization. In the field of EAs, each candidate solution, also called an individual, is commonly represented as a string of numbers (referred to as a chromosome). After each round of testing or simulation the idea is to delete the n worst individuals, and to breed n new ones from the best solutions. Each individual must therefore to be assigned a quality number indicating how close it has come to the overall specification, and this is generated by applying the fitness function to the test or simulation results obtained from that candidate solution. Two main classes of fitness functions exist: one where the fitness function does not change, as in optimizing a fixed function or testing with a fixed set of test cases; and one where the fitness function is mutable, as in niche differentiation or co-evolving the set of test cases. Another way of looking at fitness functions is in terms of a fitness landscape, which shows the fitness for each possible chromosome. In the following, it is assumed that the fitness is determined based on an evaluation that remains unchanged during an optimization run. A fitness function does not necessarily have to be able to calculate an absolute value, as it is sometimes sufficient to compare candidates in order to select the better one. A relative indication of fitness (candidate a is better than b) is sufficient in some cases, such as tournament selection or Pareto optimization. == Requirements of evaluation and fitness function == The quality of the evaluation and calculation of a fitness function is fundamental to the success of an EA optimisation. It implements Darwin's principle of "survival of the fittest". Without fitness-based selection mechanisms for mate selection and offspring acceptance, EA search would be blind and hardly distinguishable from the Monte Carlo method. When setting up a fitness function, one must always be aware that it is about more than just describing the desired target state. Rather, the evolutionary search on the way to the optimum should also be supported as much as possible (see also section on auxiliary objectives), if and insofar as this is not already done by the fitness function alone. If the fitness function is designed badly, the algorithm will either converge on an inappropriate solution, or will have difficulty converging at all. Definition of the fitness function is not straightforward in many cases and often is performed iteratively if the fittest solutions produced by an EA is not what is desired. Interactive genetic algorithms address this difficulty by outsourcing evaluation to external agents which are normally humans. == Computational efficiency == The fitness function should not only closely align with the designer's goal, but also be computationally efficient. Execution speed is crucial, as a typical evolutionary algorithm must be iterated many times in order to produce a usable result for a non-trivial problem. Fitness approximation may be appropriate, especially in the following cases: Fitness computation time of a single solution is extremely high Precise model for fitness computation is missing The fitness function is uncertain or noisy. Alternatively or also in addition to the fitness approximation, the fitness calculations can also be distributed to a parallel computer in order to reduce the execution times. Depending on the population model of the EA used, both the EA itself and the fitness calculations of all offspring of one generation can be executed in parallel. == Multi-objective optimization == Practical applications usually aim at optimizing multiple and at least partially conflicting objectives. Two fundamentally different approaches are often used for this purpose, Pareto optimization and optimization based on fitness calculated using the weighted sum. === Weighted sum and penalty functions === When optimizing with the weighted sum, the single values of the O {\displaystyle O} objectives are first normalized so that they can be compared. This can be done with the help of costs or by specifying target values and determining the current value as the degree of fulfillment. Costs or degrees of fulfillment can then be compared with each other and, if required, can also be mapped to a uniform fitness scale. Without loss of generality, fitness is assumed to represent a value to be maximized. Each objective o i {\displaystyle o_{i}} is assigned a weight w i {\displaystyle w_{i}} in the form of a percentage value so that the overall raw fitness f r a w {\displaystyle f_{raw}} can be calculated as a weighted sum: f r a w = ∑ i = 1 O o i ⋅ w i w i t h ∑ i = 1 O w i = 1 {\displaystyle f_{raw}=\sum _{i=1}^{O}{o_{i}\cdot w_{i}}\quad {\mathsf {with}}\quad \sum _{i=1}^{O}{w_{i}}=1} A violation of R {\displaystyle R} restrictions r j {\displaystyle r_{j}} can be included in the fitness determined in this way in the form of penalty functions. For this purpose, a function p f j ( r j ) {\displaystyle pf_{j}(r_{j})} can be defined for each restriction which returns a value between 0 {\displaystyle 0} and 1 {\displaystyle 1} depending on the degree of violation, with the result being 1 {\displaystyle 1} if there is no violation. The previously determined raw fitness is multiplied by the penalty function(s) and the result is then the final fitness f f i n a l {\displaystyle f_{final}} : f f i n a l = f r a w ⋅ ∏ j = 1 R p f j ( r j ) = ∑ i = 1 O ( o i ⋅ w i ) ⋅ ∏ j = 1 R p f j ( r j ) {\displaystyle f_{final}=f_{raw}\cdot \prod _{j=1}^{R}{pf_{j}(r_{j})}=\sum _{i=1}^{O}{(o_{i}\cdot w_{i})}\cdot \prod _{j=1}^{R}{pf_{j}(r_{j})}} This approach is simple and has the advantage of being able to combine any number of objectives and restrictions. The disadvantage is that different objectives can compensate each other and that the weights have to be defined before the optimization. This means that the compromise lines must be defined before optimization, which is why optimization with the weighted sum is also referred to as the a priori method. In addition, certain solutions may not be obtained, see the section on the comparison of both types of optimization. === Pareto optimization === A solution is called Pareto-optimal if the improvement of one objective is only possible with a deterioration of at least one other objective. The set of all Pareto-optimal solutions, also called Pareto set, represents the set of all optimal compromises between the objectives. The figure below on the right shows an example of the Pareto set of two objectives f 1 {\displaystyle f_{1}} and f 2 {\displaystyle f_{2}} to be maximized. The elements of the set form the Pareto front (green line). From this set, a human decision maker must subsequently select the desired compromise solution. Constraints are included in Pareto optimization in that solutions without constraint violations are per se better than those with violations. If two solutions to be compared each have constraint violations, the respective extent of the violations decides. It was recognized early on that EAs with their simultaneously considered solution set are well suited to finding solutions in one run that cover the Pareto front sufficiently well. They are therefore well suited as a-posteriori methods for multi-objective optimization, in which the final decision is made by a human decision maker after optimization and determination of the Pareto front. Besides the SPEA2, the NSGA-II and NSGA-III have established themselves as standard methods. The advantage of Pareto optimization is that, in contrast to the weighted sum, it provides all alternatives that are equivalent in terms of the objectives as an overall solution. The disadvantage is that a visualization of the alternatives becomes problematic or even impossible from four objectives on. Furthermore, the effort increases exponentially with the number of objectives. If there are more than three or four objectives, some have to be combined using the weighted sum or other aggregation methods. === Comparison of both types of assessment === With the help of the weighted sum, the total Pareto front can be obtained by a suitable choice of weights, provided that it is convex

    Read more →
  • Variational message passing

    Variational message passing

    Variational message passing (VMP) is an approximate inference technique for continuous- or discrete-valued Bayesian networks, with conjugate-exponential parents, developed by John Winn. VMP was developed as a means of generalizing the approximate variational methods used by such techniques as latent Dirichlet allocation, and works by updating an approximate distribution at each node through messages in the node's Markov blanket. == Likelihood lower bound == Given some set of hidden variables H {\displaystyle H} and observed variables V {\displaystyle V} , the goal of approximate inference is to maximize a lower-bound on the probability that a graphical model is in the configuration V {\displaystyle V} . Over some probability distribution Q {\displaystyle Q} (to be defined later), ln ⁡ P ( V ) = ∑ H Q ( H ) ln ⁡ P ( H , V ) P ( H | V ) = ∑ H Q ( H ) [ ln ⁡ P ( H , V ) Q ( H ) − ln ⁡ P ( H | V ) Q ( H ) ] {\displaystyle \ln P(V)=\sum _{H}Q(H)\ln {\frac {P(H,V)}{P(H|V)}}=\sum _{H}Q(H){\Bigg [}\ln {\frac {P(H,V)}{Q(H)}}-\ln {\frac {P(H|V)}{Q(H)}}{\Bigg ]}} . So, if we define our lower bound to be L ( Q ) = ∑ H Q ( H ) ln ⁡ P ( H , V ) Q ( H ) {\displaystyle L(Q)=\sum _{H}Q(H)\ln {\frac {P(H,V)}{Q(H)}}} , then the likelihood is simply this bound plus the relative entropy between P {\displaystyle P} and Q {\displaystyle Q} . Because the relative entropy is non-negative, the function L {\displaystyle L} defined above is indeed a lower bound of the log likelihood of our observation V {\displaystyle V} . The distribution Q {\displaystyle Q} will have a simpler character than that of P {\displaystyle P} because marginalizing over P {\displaystyle P} is intractable for all but the simplest of graphical models. In particular, VMP uses a factorized distribution Q ( H ) = ∏ i Q i ( H i ) , {\displaystyle Q(H)=\prod _{i}Q_{i}(H_{i}),} where H i {\displaystyle H_{i}} is a disjoint part of the graphical model. == Determining the update rule == The likelihood estimate needs to be as large as possible; because it's a lower bound, getting closer log ⁡ P {\displaystyle \log P} improves the approximation of the log likelihood. By substituting in the factorized version of Q {\displaystyle Q} , L ( Q ) {\displaystyle L(Q)} , parameterized over the hidden nodes H i {\displaystyle H_{i}} as above, is simply the negative relative entropy between Q j {\displaystyle Q_{j}} and Q j ∗ {\displaystyle Q_{j}^{}} plus other terms independent of Q j {\displaystyle Q_{j}} if Q j ∗ {\displaystyle Q_{j}^{}} is defined as Q j ∗ ( H j ) = 1 Z e E − j { ln ⁡ P ( H , V ) } {\displaystyle Q_{j}^{}(H_{j})={\frac {1}{Z}}e^{\mathbb {E} _{-j}\{\ln P(H,V)\}}} , where E − j { ln ⁡ P ( H , V ) } {\displaystyle \mathbb {E} _{-j}\{\ln P(H,V)\}} is the expectation over all distributions Q i {\displaystyle Q_{i}} except Q j {\displaystyle Q_{j}} . Thus, if we set Q j {\displaystyle Q_{j}} to be Q j ∗ {\displaystyle Q_{j}^{}} , the bound L {\displaystyle L} is maximized. == Messages in variational message passing == Parents send their children the expectation of their sufficient statistic while children send their parents their natural parameter, which also requires messages to be sent from the co-parents of the node. == Relationship to exponential families == Because all nodes in VMP come from exponential families and all parents of nodes are conjugate to their children nodes, the expectation of the sufficient statistic can be computed from the normalization factor. == VMP algorithm == The algorithm begins by computing the expected value of the sufficient statistics for that vector. Then, until the likelihood converges to a stable value (this is usually accomplished by setting a small threshold value and running the algorithm until it increases by less than that threshold value), do the following at each node: Get all messages from parents. Get all messages from children (this might require the children to get messages from the co-parents). Compute the expected value of the nodes sufficient statistics. == Constraints == Because every child must be conjugate to its parent, this has limited the types of distributions that can be used in the model. For example, the parents of a Gaussian distribution must be a Gaussian distribution (corresponding to the Mean) and a gamma distribution (corresponding to the precision, or one over σ {\displaystyle \sigma } in more common parameterizations). Discrete variables can have Dirichlet parents, and Poisson and exponential nodes must have gamma parents. More recently, VMP has been extended to handle models that violate this conditional conjugacy constraint. == Literature == John Winn; Christopher M. Bishop (2005). "Variational Message Passing" (PDF). Journal of Machine Learning Research. 6: 661–694. ISSN 1533-7928. Wikidata Q139488859. Beal, M.J. (2003). Variational Algorithms for Approximate Bayesian Inference (PDF) (PhD). Gatsby Computational Neuroscience Unit, University College London. Archived from the original (PDF) on 2005-04-28. Retrieved 2007-02-15.

    Read more →
  • C-RAN

    C-RAN

    C-RAN (Cloud-RAN), also referred to as Centralized-RAN, is an architecture for cellular networks. C-RAN is a centralized, cloud computing-based architecture for radio access networks that supports 2G, 3G, 4G, 5G and future wireless communication standards. Its name comes from the four 'C's in the main characteristics of C-RAN system, "Clean, Centralized processing, Collaborative radio, and a real-time Cloud Radio Access Network". == Background == Traditional cellular, or Radio Access Networks (RAN), consist of many stand-alone base stations (BTS). Each BTS covers a small area, whereas a group BTS provides coverage over a continuous area. Each BTS processes and transmits its own signal to and from the mobile terminal, and forwards the data payload to and from the mobile terminal and out to the core network via the backhaul. Each BTS has its own cooling, back haul transportation, backup battery, monitoring system, and so on. Because of limited spectral resources, network operators 'reuse' the frequency among different base stations, which can cause interference between neighboring cells. There are several limitations in the traditional cellular architecture. First, each BTS is costly to build and operate. Moore's law helps reduce the size and power of an electrical system, but the supporting facilities of the BTS are not improved quite as well. Second, when more BTS are added to a system to improve its capacity, interference among BTS is more severe as BTS are closer to each other and more of them are using the same frequency. Third, because users are mobile, the traffic of each BTS fluctuates (called 'tide effect'), and as a result, the average utilization rate of individual BTS is pretty low. However, these processing resources cannot be shared with other BTS. Therefore, all BTS are designed to handle the maximum traffic, not average traffic, resulting in a waste of processing resources and power at idle times. == Evolution of base station architecture == === All-in-one macro base station === In the 1G and 2G cellular networks, base stations had an all-in-one architecture. Analog, digital, and power functions were housed in a single cabinet as large as a refrigerator. Usually the base station cabinet was placed in a dedicated room along with all necessary supporting facilitates such as power, backup battery, air conditioning, environment surveillance, and backhaul transmission equipment. The RF signal is generated by the base station RF unit and propagates through pairs of RF cables up to the antennas on the top of a base station tower or other mounting points. This all-in-one architecture was mostly found in macro cell deployments. === Distributed base station === For 3G, a distributed base station architecture was introduced by Ericsson, Nokia, Huawei, and other leading telecom equipment vendors. In this architecture the radio function unit, also known as the remote radio head (RRH), is separated from the digital function unit, or baseband unit (BBU) by fiber. Digital baseband signals are carried over fiber, using the Open Base Station Architecture Initiative (OBSAI) or Common Public Radio Interface (CPRI) standard. The RRH can be installed on the top of tower close to the antenna, reducing the loss compared to the traditional base station where the RF signal has to travel through a long cable from the base station cabinet to the antenna at the top of the tower. The fiber link between RRH and BBU also allows more flexibility in network planning and deployment as they can be placed a few hundred meters or a few kilometers away. Most modern base stations now use this decoupled architecture. === C-RAN/Cloud-RAN === C-RAN may be viewed as an architectural evolution of the above distributed base station system. It takes advantage of many technological advances in wireless, optical and IT communications systems. For example, it uses the latest CPRI standard, low cost Coarse or Dense Wavelength Division Multiplexing (CWDM/ DWDM) technology, and mmWave to allow transmission of baseband signal over long distance thus achieving large scale centralised base station deployment. It applies recent Data Centre Network technology to allow a low cost, high reliability, low latency and high bandwidth interconnect network in the BBU pool. It utilizes open platforms and real-time virtualization technology rooted in cloud computing to achieve dynamic shared resource allocation and support multi-vendor, multi-technology environments. == Architecture overview == C-RAN architecture has the following characteristics that are distinct from other cellular architectures: Large scale centralized deployment: Allows many RRHs to connect to a centralized BBU pool. The maximum distance can be 20km in fiber link for 4G (LTE/LTE-A) systems, and even longer distances (40~80km) for 3G (WCDMA/TD-SCDMA) and 2G (GSM/CDMA) systems. Native support to Collaborative Radio technologies: Any BBU can talk with any other BBU within the BBU pool with very high bandwidth (10 Gbit/s and above) and low latency (10 μs level). This is enabled by the interconnection of BBUs in the pool. This is one major difference from BBU Hotelling, or base station Hotelling; in the latter case, the BBUs of different base stations are simply stacked together and have no direct link between them to allow physical layer co-ordination. Real-time virtualization capability based on open platform: This is different from traditional base stations built on proprietary hardware, where the software and hardware are close-sourced and provided by single vendors. In contrast, a C-RAN BBU pool is built on open hardware, like x86/ARM CPU based servers, and interface cards that handle fiber links to RRHs and inter-connections in the pool. Real-time virtualization ensures that resources in the pool can be allocated dynamically to base station software stacks, say 4G/3G/2G function modules from different vendors, according to network load. However, to satisfy the strict timing requirements of wireless communication systems, the real-time performance for C-RAN is at the level of tens of microseconds, which is two orders of magnitude better than the millisecond level 'real-time' performance usually seen in Cloud Computing environments. == Similar architecture and systems == KT, a telecom operator in the Republic of Korea, introduced a Cloud Computing Center (CCC) system in their 3G (WCDMA/HSPA) and 4G (LTE/LTE-A) network in 2011 and 2012. The concept of CCC is basically the same as C-RAN. SK Telecom has also deployed Smart Cloud Access Network (SCAN) and Advanced-SCAN in their 4G (LTE/LTE-A) network in Korea no later than 2012. In 2014, Airvana (now CommScope) introduced OneCell, a C-RAN-based small cell system designed for enterprises and public spaces. == Competing architectures in cellular network evolution == === All-in-one BTS === One major alternative solution that is addressing similar challenges of RAN, is the small size, all-in-one outdoor BTS. Thanks to the achievements in the semiconductor industry, all the functionality of a BTS, including RF, baseband processing, MAC processing and package level processing, can now be implemented in a volume of <50 liters. This makes the system small and weatherproof, reduces the difficulty of BTS site choice and construction, eliminates the air conditioning requirement, and thus reduces operational costs. However, because each BTS is still working on its own, it cannot readily make use of the collaboration algorithms to reduce the interference between neighboring BTSs. It is also relatively hard to upgrade or repair because the all-in-one BTS units are usually mounted near the antenna. More processing units in less-protected environments also implies a higher failure rate compared to C-RAN, which only has the RRU deployed outdoors. The advantage of Cloud RAN lies in its ability to implement LTE-Advanced features such as Coordinated MultiPoint (CoMP) with very low latency between multiple radio heads. However, the economic benefit of improvements such as CoMP can be negated by the higher backhaul costs for some operators. === Small cell === The main competition between small cell and C-RAN occurs in two deployment scenarios: outdoor hotspot coverage and indoor coverage. == Academic research and publications == As one of the promising evolution paths for future cellular network architecture, C-RAN has attracted high academic research interest. Meanwhile, because the native support of cooperative radio capability built into the C-RAN architecture, it also enables many advanced algorithms that were hard to implement in cellular networks, including Cooperative Multi-Point Transmission/Receiving, Network Coding, etc. In October 2011, Wireless World Research Forum 27 was hosted in Germany, when China Mobile was invited to give a C-RAN presentation. In August 2012, IEEE C-RAN 2012 workshop was hosted in Kunming, China. CRC Press published a book, "Green Communications: Theore

    Read more →
  • Gaussian adaptation

    Gaussian adaptation

    Gaussian adaptation (GA), also called normal or natural adaptation (NA) is an evolutionary algorithm designed for the maximization of manufacturing yield due to statistical deviation of component values of signal processing systems. In short, GA is a stochastic adaptive process where a number of samples of an n-dimensional vector x[xT = (x1, x2, ..., xn)] are taken from a multivariate Gaussian distribution, N(m, M), having mean m and moment matrix M. The samples are tested for fail or pass. The first- and second-order moments of the Gaussian restricted to the pass samples are m and M. The outcome of x as a pass sample is determined by a function s(x), 0 < s(x) < q ≤ 1, such that s(x) is the probability that x will be selected as a pass sample. The average probability of finding pass samples (yield) is P ( m ) = ∫ s ( x ) N ( x − m ) d x {\displaystyle P(m)=\int s(x)N(x-m)\,dx} Then the theorem of GA states: For any s(x) and for any value of P < q, there always exist a Gaussian p. d. f. [ probability density function ] that is adapted for maximum dispersion. The necessary conditions for a local optimum are m = m and M proportional to M. The dual problem is also solved: P is maximized while keeping the dispersion constant (Kjellström, 1991). Proofs of the theorem may be found in the papers by Kjellström, 1970, and Kjellström & Taxén, 1981. Since dispersion is defined as the exponential of entropy/disorder/average information it immediately follows that the theorem is valid also for those concepts. Altogether, this means that Gaussian adaptation may carry out a simultaneous maximisation of yield and average information (without any need for the yield or the average information to be defined as criterion functions). The theorem is valid for all regions of acceptability and all Gaussian distributions. It may be used by cyclic repetition of random variation and selection (like the natural evolution). In every cycle a sufficiently large number of Gaussian distributed points are sampled and tested for membership in the region of acceptability. The centre of gravity of the Gaussian, m, is then moved to the centre of gravity of the approved (selected) points, m. Thus, the process converges to a state of equilibrium fulfilling the theorem. A solution is always approximate because the centre of gravity is always determined for a limited number of points. It was used for the first time in 1969 as a pure optimization algorithm making the regions of acceptability smaller and smaller (in analogy to simulated annealing, Kirkpatrick 1983). Since 1970 it has been used for both ordinary optimization and yield maximization. == Natural evolution and Gaussian adaptation == It has also been compared to the natural evolution of populations of living organisms. In this case s(x) is the probability that the individual having an array x of phenotypes will survive by giving offspring to the next generation; a definition of individual fitness given by Hartl 1981. The yield, P, is replaced by the mean fitness determined as a mean over the set of individuals in a large population. Phenotypes are often Gaussian distributed in a large population and a necessary condition for the natural evolution to be able to fulfill the theorem of Gaussian adaptation, with respect to all Gaussian quantitative characters, is that it may push the centre of gravity of the Gaussian to the centre of gravity of the selected individuals. This may be accomplished by the Hardy–Weinberg law. This is possible because the theorem of Gaussian adaptation is valid for any region of acceptability independent of the structure (Kjellström, 1996). In this case the rules of genetic variation such as crossover, inversion, transposition etcetera may be seen as random number generators for the phenotypes. So, in this sense Gaussian adaptation may be seen as a genetic algorithm. == How to climb a mountain == Mean fitness may be calculated provided that the distribution of parameters and the structure of the landscape is known. The real landscape is not known, but figure below shows a fictitious profile (blue) of a landscape along a line (x) in a room spanned by such parameters. The red curve is the mean based on the red bell curve at the bottom of figure. It is obtained by letting the bell curve slide along the x-axis, calculating the mean at every location. As can be seen, small peaks and pits are smoothed out. Thus, if evolution is started at A with a relatively small variance (the red bell curve), then climbing will take place on the red curve. The process may get stuck for millions of years at B or C, as long as the hollows to the right of these points remain, and the mutation rate is too small. If the mutation rate is sufficiently high, the disorder or variance may increase and the parameter(s) may become distributed like the green bell curve. Then the climbing will take place on the green curve, which is even more smoothed out. Because the hollows to the right of B and C have now disappeared, the process may continue up to the peaks at D. But of course the landscape puts a limit on the disorder or variability. Besides — dependent on the landscape — the process may become very jerky, and if the ratio between the time spent by the process at a local peak and the time of transition to the next peak is very high, it may as well look like a punctuated equilibrium as suggested by Gould (see Ridley). == Computer simulation of Gaussian adaptation == Thus far the theory only considers mean values of continuous distributions corresponding to an infinite number of individuals. In reality however, the number of individuals is always limited, which gives rise to an uncertainty in the estimation of m and M (the moment matrix of the Gaussian). And this may also affect the efficiency of the process. Unfortunately very little is known about this, at least theoretically. The implementation of normal adaptation on a computer is a fairly simple task. The adaptation of m may be done by one sample (individual) at a time, for example m(i + 1) = (1 – a) m(i) + ax where x is a pass sample, and a < 1 a suitable constant so that the inverse of a represents the number of individuals in the population. M may in principle be updated after every step y leading to a feasible point x = m + y according to: M(i + 1) = (1 – 2b) M(i) + 2byyT, where yT is the transpose of y and b << 1 is another suitable constant. In order to guarantee a suitable increase of average information, y should be normally distributed with moment matrix μ2M, where the scalar μ > 1 is used to increase average information (information entropy, disorder, diversity) at a suitable rate. But M will never be used in the calculations. Instead we use the matrix W defined by WWT = M. Thus, we have y = Wg, where g is normally distributed with the moment matrix μU, and U is the unit matrix. W and WT may be updated by the formulas W = (1 – b)W + bygT and WT = (1 – b)WT + bgyT because multiplication gives M = (1 – 2b)M + 2byyT, where terms including b2 have been neglected. Thus, M will be indirectly adapted with good approximation. In practice it will suffice to update W only W(i + 1) = (1 – b)W(i) + bygT. This is the formula used in a simple 2-dimensional model of a brain satisfying the Hebbian rule of associative learning; see the next section (Kjellström, 1996 and 1999). The figure below illustrates the effect of increased average information in a Gaussian p.d.f. used to climb a mountain Crest (the two lines represent the contour line). Both the red and green cluster have equal mean fitness, about 65%, but the green cluster has a much higher average information making the green process much more efficient. The effect of this adaptation is not very salient in a 2-dimensional case, but in a high-dimensional case, the efficiency of the search process may be increased by many orders of magnitude. == The evolution in the brain == In the brain the evolution of DNA-messages is supposed to be replaced by an evolution of signal patterns and the phenotypic landscape is replaced by a mental landscape, the complexity of which will hardly be second to the former. The metaphor with the mental landscape is based on the assumption that certain signal patterns give rise to a better well-being or performance. For instance, the control of a group of muscles leads to a better pronunciation of a word or performance of a piece of music. In this simple model it is assumed that the brain consists of interconnected components that may add, multiply and delay signal values. A nerve cell kernel may add signal values, a synapse may multiply with a constant and An axon may delay values. This is a basis of the theory of digital filters and neural networks consisting of components that may add, multiply and delay signalvalues and also of many brain models, Levine 1991. In the figure below the brain stem is supposed to deliver Gaussian distributed signal patterns. This may be possible since certai

    Read more →
  • Generalized blockmodeling of binary networks

    Generalized blockmodeling of binary networks

    Generalized blockmodeling of binary networks (also relational blockmodeling) is an approach of generalized blockmodeling, analysing the binary network(s). As most network analyses deal with binary networks, this approach is also considered as the fundamental approach of blockmodeling. This is especially noted, as the set of ideal blocks, when used for interpretation of blockmodels, have binary link patterns, which precludes them to be compared with valued empirical blocks. When analysing the binary networks, the criterion function is measuring block inconsistencies, while also reporting the possible errors. The ideal block in binary blockmodeling has only three types of conditions: "a certain cell must be (at least) 1, a certain cell must be 0 and the f {\displaystyle f} over each row (or column) must be at least 1". It is also used as a basis for developing the generalized blockmodeling of valued networks.

    Read more →
  • Dominance-based rough set approach

    Dominance-based rough set approach

    The dominance-based rough set approach (DRSA) is an extension of rough set theory for multi-criteria decision analysis (MCDA), introduced by Greco, Matarazzo and Słowiński. The main change compared to the classical rough sets is the substitution for the indiscernibility relation by a dominance relation, which permits one to deal with inconsistencies typical to consideration of criteria and preference-ordered decision classes. == Multicriteria classification (sorting) == Multicriteria classification (sorting) is one of the problems considered within MCDA and can be stated as follows: given a set of objects evaluated by a set of criteria (attributes with preference-order domains), assign these objects to some pre-defined and preference-ordered decision classes, such that each object is assigned to exactly one class. Due to the preference ordering, improvement of evaluations of an object on the criteria should not worsen its class assignment. The sorting problem is very similar to the problem of classification, however, in the latter, the objects are evaluated by regular attributes and the decision classes are not necessarily preference ordered. The problem of multicriteria classification is also referred to as ordinal classification problem with monotonicity constraints and often appears in real-life application when ordinal and monotone properties follow from the domain knowledge about the problem. As an illustrative example, consider the problem of evaluation in a high school. The director of the school wants to assign students (objects) to three classes: bad, medium and good (notice that class good is preferred to medium and medium is preferred to bad). Each student is described by three criteria: level in Physics, Mathematics and Literature, each taking one of three possible values bad, medium and good. Criteria are preference-ordered and improving the level from one of the subjects should not result in worse global evaluation (class). As a more serious example, consider classification of bank clients, from the viewpoint of bankruptcy risk, into classes safe and risky. This may involve such characteristics as "return on equity (ROE)", "return on investment (ROI)" and "return on sales (ROS)". The domains of these attributes are not simply ordered but involve a preference order since, from the viewpoint of bank managers, greater values of ROE, ROI or ROS are better for clients being analysed for bankruptcy risk . Thus, these attributes are criteria. Neglecting this information in knowledge discovery may lead to wrong conclusions. == Data representation == === Decision table === In DRSA, data are often presented using a particular form of decision table. Formally, a DRSA decision table is a 4-tuple S = ⟨ U , Q , V , f ⟩ {\displaystyle S=\langle U,Q,V,f\rangle } , where U {\displaystyle U\,\!} is a finite set of objects, Q {\displaystyle Q\,\!} is a finite set of criteria, V = ⋃ q ∈ Q V q {\displaystyle V=\bigcup {}_{q\in Q}V_{q}} where V q {\displaystyle V_{q}\,\!} is the domain of the criterion q {\displaystyle q\,\!} and f : U × Q → V {\displaystyle f\colon U\times Q\to V} is an information function such that f ( x , q ) ∈ V q {\displaystyle f(x,q)\in V_{q}} for every ( x , q ) ∈ U × Q {\displaystyle (x,q)\in U\times Q} . The set Q {\displaystyle Q\,\!} is divided into condition criteria (set C ≠ ∅ {\displaystyle C\neq \emptyset } ) and the decision criterion (class) d {\displaystyle d\,\!} . Notice, that f ( x , q ) {\displaystyle f(x,q)\,\!} is an evaluation of object x {\displaystyle x\,\!} on criterion q ∈ C {\displaystyle q\in C} , while f ( x , d ) {\displaystyle f(x,d)\,\!} is the class assignment (decision value) of the object. An example of decision table is shown in Table 1 below. === Outranking relation === It is assumed that the domain of a criterion q ∈ Q {\displaystyle q\in Q} is completely preordered by an outranking relation ⪰ q {\displaystyle \succeq _{q}} ; x ⪰ q y {\displaystyle x\succeq _{q}y} means that x {\displaystyle x\,\!} is at least as good as (outranks) y {\displaystyle y\,\!} with respect to the criterion q {\displaystyle q\,\!} . Without loss of generality, we assume that the domain of q {\displaystyle q\,\!} is a subset of reals, V q ⊆ R {\displaystyle V_{q}\subseteq \mathbb {R} } , and that the outranking relation is a simple order between real numbers ≥ {\displaystyle \geq \,\!} such that the following relation holds: x ⪰ q y ⟺ f ( x , q ) ≥ f ( y , q ) {\displaystyle x\succeq _{q}y\iff f(x,q)\geq f(y,q)} . This relation is straightforward for gain-type ("the more, the better") criterion, e.g. company profit. For cost-type ("the less, the better") criterion, e.g. product price, this relation can be satisfied by negating the values from V q {\displaystyle V_{q}\,\!} . === Decision classes and class unions === Let T = { 1 , … , n } {\displaystyle T=\{1,\ldots ,n\}\,\!} . The domain of decision criterion, V d {\displaystyle V_{d}\,\!} consist of n {\displaystyle n\,\!} elements (without loss of generality we assume V d = T {\displaystyle V_{d}=T\,\!} ) and induces a partition of U {\displaystyle U\,\!} into n {\displaystyle n\,\!} classes Cl = { C l t , t ∈ T } {\displaystyle {\textbf {Cl}}=\{Cl_{t},t\in T\}} , where C l t = { x ∈ U : f ( x , d ) = t } {\displaystyle Cl_{t}=\{x\in U\colon f(x,d)=t\}} . Each object x ∈ U {\displaystyle x\in U} is assigned to one and only one class C l t , t ∈ T {\displaystyle Cl_{t},t\in T} . The classes are preference-ordered according to an increasing order of class indices, i.e. for all r , s ∈ T {\displaystyle r,s\in T} such that r ≥ s {\displaystyle r\geq s\,\!} , the objects from C l r {\displaystyle Cl_{r}\,\!} are strictly preferred to the objects from C l s {\displaystyle Cl_{s}\,\!} . For this reason, we can consider the upward and downward unions of classes, defined respectively, as: C l t ≥ = ⋃ s ≥ t C l s C l t ≤ = ⋃ s ≤ t C l s t ∈ T {\displaystyle Cl_{t}^{\geq }=\bigcup _{s\geq t}Cl_{s}\qquad Cl_{t}^{\leq }=\bigcup _{s\leq t}Cl_{s}\qquad t\in T} == Main concepts == === Dominance === We say that x {\displaystyle x\,\!} dominates y {\displaystyle y\,\!} with respect to P ⊆ C {\displaystyle P\subseteq C} , denoted by x D p y {\displaystyle xD_{p}y\,\!} , if x {\displaystyle x\,\!} is better than y {\displaystyle y\,\!} on every criterion from P {\displaystyle P\,\!} , x ⪰ q y , ∀ q ∈ P {\displaystyle x\succeq _{q}y,\,\forall q\in P} . For each P ⊆ C {\displaystyle P\subseteq C} , the dominance relation D P {\displaystyle D_{P}\,\!} is reflexive and transitive, i.e. it is a partial pre-order. Given P ⊆ C {\displaystyle P\subseteq C} and x ∈ U {\displaystyle x\in U} , let D P + ( x ) = { y ∈ U : y D p x } {\displaystyle D_{P}^{+}(x)=\{y\in U\colon yD_{p}x\}} D P − ( x ) = { y ∈ U : x D p y } {\displaystyle D_{P}^{-}(x)=\{y\in U\colon xD_{p}y\}} represent P-dominating set and P-dominated set with respect to x ∈ U {\displaystyle x\in U} , respectively. === Rough approximations === The key idea of the rough set philosophy is approximation of one knowledge by another knowledge. In DRSA, the knowledge being approximated is a collection of upward and downward unions of decision classes and the "granules of knowledge" used for approximation are P-dominating and P-dominated sets. The P-lower and the P-upper approximation of C l t ≥ , t ∈ T {\displaystyle Cl_{t}^{\geq },t\in T} with respect to P ⊆ C {\displaystyle P\subseteq C} , denoted as P _ ( C l t ≥ ) {\displaystyle {\underline {P}}(Cl_{t}^{\geq })} and P ¯ ( C l t ≥ ) {\displaystyle {\overline {P}}(Cl_{t}^{\geq })} , respectively, are defined as: P _ ( C l t ≥ ) = { x ∈ U : D P + ( x ) ⊆ C l t ≥ } {\displaystyle {\underline {P}}(Cl_{t}^{\geq })=\{x\in U\colon D_{P}^{+}(x)\subseteq Cl_{t}^{\geq }\}} P ¯ ( C l t ≥ ) = { x ∈ U : D P − ( x ) ∩ C l t ≥ ≠ ∅ } {\displaystyle {\overline {P}}(Cl_{t}^{\geq })=\{x\in U\colon D_{P}^{-}(x)\cap Cl_{t}^{\geq }\neq \emptyset \}} Analogously, the P-lower and the P-upper approximation of C l t ≤ , t ∈ T {\displaystyle Cl_{t}^{\leq },t\in T} with respect to P ⊆ C {\displaystyle P\subseteq C} , denoted as P _ ( C l t ≤ ) {\displaystyle {\underline {P}}(Cl_{t}^{\leq })} and P ¯ ( C l t ≤ ) {\displaystyle {\overline {P}}(Cl_{t}^{\leq })} , respectively, are defined as: P _ ( C l t ≤ ) = { x ∈ U : D P − ( x ) ⊆ C l t ≤ } {\displaystyle {\underline {P}}(Cl_{t}^{\leq })=\{x\in U\colon D_{P}^{-}(x)\subseteq Cl_{t}^{\leq }\}} P ¯ ( C l t ≤ ) = { x ∈ U : D P + ( x ) ∩ C l t ≤ ≠ ∅ } {\displaystyle {\overline {P}}(Cl_{t}^{\leq })=\{x\in U\colon D_{P}^{+}(x)\cap Cl_{t}^{\leq }\neq \emptyset \}} Lower approximations group the objects which certainly belong to class union C l t ≥ {\displaystyle Cl_{t}^{\geq }} (respectively C l t ≤ {\displaystyle Cl_{t}^{\leq }} ). This certainty comes from the fact, that object x ∈ U {\displaystyle x\in U} belongs to the lower approximation P _ ( C l t ≥ ) {\displaystyle {\underline {P}}(Cl_{t}^{\geq })} (respectively P _ ( C l t ≤ ) {\displaystyle {\underl

    Read more →
  • Neural scaling law

    Neural scaling law

    In machine learning, a neural scaling law is an empirical scaling law that describes how neural network performance changes as key factors are scaled up or down. These factors typically include the number of parameters, training dataset size, and training cost. Some models also exhibit performance gains by scaling inference through increased test-time compute (TTC), extending neural scaling laws beyond training to the deployment phase. == Introduction == In general, a deep learning model can be characterized by four parameters: model size, training dataset size, training cost, and the post-training error rate (e.g., the test set error rate). Each of these variables can be defined as a real number, usually written as N , D , C , L {\displaystyle N,D,C,L} (respectively: parameter count, dataset size, computing cost, and loss). A neural scaling law is a theoretical or empirical statistical law between these parameters. There are also other parameters with other scaling laws. === Size of the model === In most cases, the model's size is simply the number of parameters. However, one complication arises with the use of sparse models, such as mixture-of-expert models. With sparse models, during inference, only a fraction of their parameters are used. In comparison, most other kinds of neural networks, such as transformer models, always use all their parameters during inference. === Size of the training dataset === The size of the training dataset is usually quantified by the number of data points within it. Larger training datasets are typically preferred, as they provide a richer and more diverse source of information from which the model can learn. This can lead to improved generalization performance when the model is applied to new, unseen data. However, increasing the size of the training dataset also increases the computational resources and time required for model training. With the "pretrain, then finetune" method used for most large language models, there are two kinds of training dataset: the pretraining dataset and the finetuning dataset. Their sizes have different effects on model performance. Generally, the finetuning dataset is less than 1% the size of pretraining dataset. In some cases, a small amount of high quality data suffices for finetuning, and more data does not necessarily improve performance. Many scaling laws, due to their inherent diminishing returns nature, value data based on a submodular set function which was shown in a paper on this topic. === Cost of training === Training cost is typically measured in terms of time (how long it takes to train the model) and computational resources (how much processing power and memory are required). It is important to note that the cost of training can be significantly reduced with efficient training algorithms, optimized software libraries, and parallel computing on specialized hardware such as GPUs or TPUs. The cost of training a neural network model is a function of several factors, including model size, training dataset size, the training algorithm complexity, and the computational resources available. In particular, doubling the training dataset size does not necessarily double the cost of training, because one may train the model for several times over the same dataset (each being an "epoch"). === Performance === The performance of a neural network model is evaluated based on its ability to accurately predict the output given some input data. Common metrics for evaluating model performance include: Negative log-likelihood per token (logarithm of perplexity) for language modeling; Accuracy, precision, recall, and F1 score for classification tasks; Mean squared error (MSE) or mean absolute error (MAE) for regression tasks; Elo rating in a competition against other models, such as gameplay or preference by a human judge. Performance can be improved by using more data, larger models, different training algorithms, regularizing the model to prevent overfitting, and early stopping using a validation set. When the performance is a number bounded within the range of [ 0 , 1 ] {\displaystyle [0,1]} , such as accuracy, precision, etc., it often scales as a sigmoid function of cost, as seen in the figures. == Examples == === (Hestness, Narang, et al, 2017) === The 2017 paper is a common reference point for neural scaling laws fitted by statistical analysis on experimental data. Previous works before the 2000s, as cited in the paper, were either theoretical or orders of magnitude smaller in scale. Whereas previous works generally found the scaling exponent to scale like L ∝ D − α {\displaystyle L\propto D^{-\alpha }} , with α ∈ { 0.5 , 1 , 2 } {\displaystyle \alpha \in \{0.5,1,2\}} , the paper found that α ∈ [ 0.07 , 0.35 ] {\displaystyle \alpha \in [0.07,0.35]} . Of the factors they varied, only task can change the exponent α {\displaystyle \alpha } . Changing the architecture optimizers, regularizers, and loss functions, would only change the proportionality factor, not the exponent. For example, for the same task, one architecture might have L = 1000 D − 0.3 {\displaystyle L=1000D^{-0.3}} while another might have L = 500 D − 0.3 {\displaystyle L=500D^{-0.3}} . They also found that for a given architecture, the number of parameters necessary to reach lowest levels of loss, given a fixed dataset size, grows like N ∝ D β {\displaystyle N\propto D^{\beta }} for another exponent β {\displaystyle \beta } . They studied machine translation with LSTM ( α ∼ 0.13 {\displaystyle \alpha \sim 0.13} ), generative language modelling with LSTM ( α ∈ [ 0.06 , 0.09 ] , β ≈ 0.7 {\displaystyle \alpha \in [0.06,0.09],\beta \approx 0.7} ), ImageNet classification with ResNet ( α ∈ [ 0.3 , 0.5 ] , β ≈ 0.6 {\displaystyle \alpha \in [0.3,0.5],\beta \approx 0.6} ), and speech recognition with two hybrid (LSTMs complemented by either CNNs or an attention decoder) architectures ( α ≈ 0.3 {\displaystyle \alpha \approx 0.3} ). === (Henighan, Kaplan, et al, 2020) === A 2020 analysis studied statistical relations between C , N , D , L {\displaystyle C,N,D,L} over a wide range of values and found similar scaling laws, over the range of N ∈ [ 10 3 , 10 9 ] {\displaystyle N\in [10^{3},10^{9}]} , C ∈ [ 10 12 , 10 21 ] {\displaystyle C\in [10^{12},10^{21}]} , and over multiple modalities (text, video, image, text to image, etc.). In particular, the scaling laws it found are (Table 1 of ): For each modality, they fixed one of the two C , N {\displaystyle C,N} , and varying the other one ( D {\displaystyle D} is varied along using D = C / 6 N {\displaystyle D=C/6N} ), the achievable test loss satisfies L = L 0 + ( x 0 x ) α {\displaystyle L=L_{0}+\left({\frac {x_{0}}{x}}\right)^{\alpha }} where x {\displaystyle x} is the varied variable, and L 0 , x 0 , α {\displaystyle L_{0},x_{0},\alpha } are parameters to be found by statistical fitting. The parameter α {\displaystyle \alpha } is the most important one. When N {\displaystyle N} is the varied variable, α {\displaystyle \alpha } ranges from 0.037 {\displaystyle 0.037} to 0.24 {\displaystyle 0.24} depending on the model modality. This corresponds to the α = 0.34 {\displaystyle \alpha =0.34} from the Chinchilla scaling paper. When C {\displaystyle C} is the varied variable, α {\displaystyle \alpha } ranges from 0.048 {\displaystyle 0.048} to 0.19 {\displaystyle 0.19} depending on the model modality. This corresponds to the β = 0.28 {\displaystyle \beta =0.28} from the Chinchilla scaling paper. Given fixed computing budget, optimal model parameter count is consistently around N o p t ( C ) = ( C 5 × 10 − 12 petaFLOP-day ) 0.7 = 9.0 × 10 − 7 C 0.7 {\displaystyle N_{opt}(C)=\left({\frac {C}{5\times 10^{-12}{\text{petaFLOP-day}}}}\right)^{0.7}=9.0\times 10^{-7}C^{0.7}} The parameter 9.0 × 10 − 7 {\displaystyle 9.0\times 10^{-7}} varies by a factor of up to 10 for different modalities. The exponent parameter 0.7 {\displaystyle 0.7} varies from 0.64 {\displaystyle 0.64} to 0.75 {\displaystyle 0.75} for different modalities. This exponent corresponds to the ≈ 0.5 {\displaystyle \approx 0.5} from the Chinchilla scaling paper. It's "strongly suggested" (but not statistically checked) that D o p t ( C ) ∝ N o p t ( C ) 0.4 ∝ C 0.28 {\displaystyle D_{opt}(C)\propto N_{opt}(C)^{0.4}\propto C^{0.28}} . This exponent corresponds to the ≈ 0.5 {\displaystyle \approx 0.5} from the Chinchilla scaling paper. The scaling law of L = L 0 + ( C 0 / C ) 0.048 {\displaystyle L=L_{0}+(C_{0}/C)^{0.048}} was confirmed during the training of GPT-3 (Figure 3.1 ). === Chinchilla scaling (Hoffmann, et al, 2022) === One particular scaling law ("Chinchilla scaling") states that, for a large language model (LLM) autoregressively trained for one epoch, with a cosine learning rate schedule, we have: { C = C 0 N D L = A N α + B D β + L 0 {\displaystyle {\begin{cases}C=C_{0}ND\\L={\frac {A}{N^{\alpha }}}+{\frac {B}{D^{\beta }}}+L_{0}\end{cases}}} where the variables are C {\displaystyle C} is the cost o

    Read more →
  • Apache Giraph

    Apache Giraph

    Apache Giraph is an Apache project to perform graph processing on big data. Giraph utilizes Apache Hadoop's MapReduce implementation to process graphs. Facebook used Giraph with some performance improvements to analyze one trillion edges using 200 machines in 4 minutes. Giraph is based on a paper published by Google about its own graph processing system called Pregel. It can be compared to other Big Graph processing libraries such as Cassovary. As of September 2023, it is no longer actively developed.

    Read more →
  • Bayesian network

    Bayesian network

    A Bayesian network (also known as a Bayes network, Bayes net, belief network, or decision network) is a probabilistic graphical model that represents a set of variables and their conditional dependencies via a directed acyclic graph (DAG). While it is one of several forms of causal notation, causal networks are special cases of Bayesian networks. Bayesian networks are ideal for taking an event that occurred and predicting the likelihood that any one of several possible known causes was the contributing factor. For example, a Bayesian network could represent the probabilistic relationships between diseases and symptoms. Given symptoms, the network can be used to compute the probabilities of the presence of various diseases. Efficient algorithms can perform inference and learning in Bayesian networks. Bayesian networks that model sequences of variables (e.g. speech signals or protein sequences) are called dynamic Bayesian networks. Generalizations of Bayesian networks that can represent and solve decision problems under uncertainty are called influence diagrams. == Graphical model == Formally, Bayesian networks are directed acyclic graphs (DAGs) whose nodes represent variables in the Bayesian sense: they may be observable quantities, latent variables, unknown parameters or hypotheses. Each edge represents a direct conditional dependency. Any pair of nodes that are not connected (i.e. no path connects one node to the other) represent variables that are conditionally independent of each other. Each node is associated with a probability function that takes, as input, a particular set of values for the node's parent variables, and gives (as output) the probability (or probability distribution, if applicable) of the variable represented by the node. For example, if m {\displaystyle m} parent nodes represent m {\displaystyle m} Boolean variables, then the probability function could be represented by a table of 2 m {\displaystyle 2^{m}} entries, one entry for each of the 2 m {\displaystyle 2^{m}} possible parent combinations. Similar ideas may be applied to undirected, and possibly cyclic, graphs such as Markov networks. == Example == Suppose we want to model the dependencies between three variables: the sprinkler (or more appropriately, its state - whether it is on or not), the presence or absence of rain and whether the grass is wet or not. Observe that two events can cause the grass to become wet: an active sprinkler or rain. Rain has a direct effect on the use of the sprinkler (namely that when it rains, the sprinkler usually is not active). This situation can be modeled with a Bayesian network (shown to the right). Each variable has two possible values, T (for true) and F (for false). The joint probability function is, by the chain rule of probability, Pr ( G , S , R ) = Pr ( G ∣ S , R ) Pr ( S ∣ R ) Pr ( R ) {\displaystyle \Pr(G,S,R)=\Pr(G\mid S,R)\Pr(S\mid R)\Pr(R)} where G = "Grass wet (true/false)", S = "Sprinkler turned on (true/false)", and R = "Raining (true/false)". The model can answer questions about the presence of a cause given the presence of an effect (so-called inverse probability) like "What is the probability that it is raining, given the grass is wet?" by using the conditional probability formula and summing over all nuisance variables: Pr ( R = T ∣ G = T ) = Pr ( G = T , R = T ) Pr ( G = T ) = ∑ x ∈ { T , F } Pr ( G = T , S = x , R = T ) ∑ x , y ∈ { T , F } Pr ( G = T , S = x , R = y ) {\displaystyle \Pr(R=T\mid G=T)={\frac {\Pr(G=T,R=T)}{\Pr(G=T)}}={\frac {\sum _{x\in \{T,F\}}\Pr(G=T,S=x,R=T)}{\sum _{x,y\in \{T,F\}}\Pr(G=T,S=x,R=y)}}} Using the expansion for the joint probability function Pr ( G , S , R ) {\displaystyle \Pr(G,S,R)} and the conditional probabilities from the conditional probability tables (CPTs) stated in the diagram, one can evaluate each term in the sums in the numerator and denominator. For example, Pr ( G = T , S = T , R = T ) = Pr ( G = T ∣ S = T , R = T ) Pr ( S = T ∣ R = T ) Pr ( R = T ) = 0.99 × 0.01 × 0.2 = 0.00198. {\displaystyle {\begin{aligned}\Pr(G=T,S=T,R=T)&=\Pr(G=T\mid S=T,R=T)\Pr(S=T\mid R=T)\Pr(R=T)\\&=0.99\times 0.01\times 0.2\\&=0.00198.\end{aligned}}} Then the numerical results (subscripted by the associated variable values) are Pr ( R = T ∣ G = T ) = 0.00198 T T T + 0.1584 T F T 0.00198 T T T + 0.288 T T F + 0.1584 T F T + 0.0 T F F = 891 2491 ≈ 35.77 % . {\displaystyle \Pr(R=T\mid G=T)={\frac {0.00198_{TTT}+0.1584_{TFT}}{0.00198_{TTT}+0.288_{TTF}+0.1584_{TFT}+0.0_{TFF}}}={\frac {891}{2491}}\approx 35.77\%.} To answer an interventional question, such as "What is the probability that it would rain, given that we wet the grass?" the answer is governed by the post-intervention joint distribution function Pr ( S , R ∣ do ( G = T ) ) = Pr ( S ∣ R ) Pr ( R ) {\displaystyle \Pr(S,R\mid {\text{do}}(G=T))=\Pr(S\mid R)\Pr(R)} obtained by removing the factor Pr ( G ∣ S , R ) {\displaystyle \Pr(G\mid S,R)} from the pre-intervention distribution. The do operator forces the value of G to be true. The probability of rain is unaffected by the action: Pr ( R ∣ do ( G = T ) ) = Pr ( R ) . {\displaystyle \Pr(R\mid {\text{do}}(G=T))=\Pr(R).} To predict the impact of turning the sprinkler on: Pr ( R , G ∣ do ( S = T ) ) = Pr ( R ) Pr ( G ∣ R , S = T ) {\displaystyle \Pr(R,G\mid {\text{do}}(S=T))=\Pr(R)\Pr(G\mid R,S=T)} with the term Pr ( S = T ∣ R ) {\displaystyle \Pr(S=T\mid R)} removed, showing that the action affects the grass but not the rain. These predictions may not be feasible given unobserved variables, as in most policy evaluation problems. The effect of the action do ( x ) {\displaystyle {\text{do}}(x)} can still be predicted, however, whenever the back-door criterion is satisfied. It states that, if a set Z of nodes can be observed that d-separates (or blocks) all back-door paths from X to Y then Pr ( Y , Z ∣ do ( x ) ) = Pr ( Y , Z , X = x ) Pr ( X = x ∣ Z ) . {\displaystyle \Pr(Y,Z\mid {\text{do}}(x))={\frac {\Pr(Y,Z,X=x)}{\Pr(X=x\mid Z)}}.} A back-door path is one that ends with an arrow into X. Sets that satisfy the back-door criterion are called "sufficient" or "admissible." For example, the set Z = R is admissible for predicting the effect of S = T on G, because R d-separates the (only) back-door path S ← R → G. However, if S is not observed, no other set d-separates this path and the effect of turning the sprinkler on (S = T) on the grass (G) cannot be predicted from passive observations. In that case P(G | do(S = T)) is not "identified". This reflects the fact that, lacking interventional data, the observed dependence between S and G is due to a causal connection or is spurious (apparent dependence arising from a common cause, R). (see Simpson's paradox) To determine whether a causal relation is identified from an arbitrary Bayesian network with unobserved variables, one can use the three rules of "do-calculus" and test whether all do terms can be removed from the expression of that relation, thus confirming that the desired quantity is estimable from frequency data. Using a Bayesian network can save considerable amounts of memory over exhaustive probability tables, if the dependencies in the joint distribution are sparse. For example, a naive way of storing the conditional probabilities of 10 two-valued variables as a table requires storage space for 2 10 = 1024 {\displaystyle 2^{10}=1024} values. If no variable's local distribution depends on more than three parent variables, the Bayesian network representation stores at most 10 ⋅ 2 3 = 80 {\displaystyle 10\cdot 2^{3}=80} values. One advantage of Bayesian networks is that it is intuitively easier for a human to understand (a sparse set of) direct dependencies and local distributions than complete joint distributions. == Inference and learning == Bayesian networks perform three main inference tasks: Inferring unobserved variables Parameter learning for the probability distributions of each node in the network Structure learning of the graphical network === Inferring unobserved variables === Because a Bayesian network is a complete model for its variables and their relationships, it can be used to answer probabilistic queries about them. For example, the network can be used to update knowledge of the state of a subset of variables when other variables (the evidence variables) are observed. This process of computing the posterior distribution of variables given evidence is called probabilistic inference. The posterior gives a universal sufficient statistic for detection applications, when choosing values for the variable subset that minimize some expected loss function, for instance the probability of decision error. A Bayesian network can thus be considered a mechanism for automatically applying Bayes' theorem to complex problems. The most common exact inference methods are: variable elimination, which eliminates (by integration or summation) the non-observed non-query variables one by one by distributing the sum over the prod

    Read more →