AI Generator Letter

AI Generator Letter — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Floyd–Steinberg dithering

  Floyd–Steinberg dithering is an image dithering algorithm first published in 1976 by Robert W. Floyd and Louis Steinberg. It is commonly used by image manipulation software, for example, when converting an image from a Truecolor 24-bit PNG format into a GIF format, which is restricted to a maximum of 256 colors. == Implementation == The algorithm achieves dithering using error diffusion, meaning it pushes (adds) the residual quantization error of a pixel onto its neighboring pixels, to be quantized after. It spreads the debt out according to the distribution (shown as a map of the neighboring pixels): [ ∗ 7 16 … … 3 16 5 16 1 16 … ] {\displaystyle {\begin{bmatrix}&&&{\frac {\displaystyle 7}{\displaystyle 16}}&\ldots \\\ldots &{\frac {\displaystyle 3}{\displaystyle 16}}&{\frac {\displaystyle 5}{\displaystyle 16}}&{\frac {\displaystyle 1}{\displaystyle 16}}&\ldots \\\end{bmatrix}}} The pixel indicated with a star () indicates the pixel currently being scanned, and the blank pixels are the previously scanned pixels. The specific values (7/16, 3/16, 5/16, 1/16) were originally found by trial-and-error, "guided by the desire to have a region of desired density 0.5 come out as a checkerboard pattern". The algorithm scans the image from left to right, top to bottom, quantizing pixel values one by one. Each time, the quantization error is transferred to the neighboring pixels, while not affecting the pixels that already have been quantized. Hence, if a number of pixels have been rounded downwards, it becomes more likely that the next pixel is rounded upwards, such that on average, the quantization error is close to zero. The diffusion coefficients have the property that if the original pixel values are exactly halfway in between the nearest available colors, the dithered result is a checkerboard pattern. For example, 50% grey data could be dithered as a black-and-white checkerboard pattern. For optimal dithering, the counting of quantization errors should be in sufficient accuracy to prevent rounding errors from affecting the result. For correct results, all values should be linearized first, rather than operating directly on sRGB values as is common for images stored on computers. In some implementations, the horizontal direction of scan alternates between lines; this is called "serpentine scanning" or boustrophedon transform dithering. The algorithm described above is in the following pseudocode. This works for any approximately linear encoding of pixel values, such as 8-bit integers, 16-bit integers or real numbers in the range [0, 1]. for each y from top to bottom do for each x from left to right do oldpixel := pixels[x][y] newpixel := find_closest_palette_color(oldpixel) pixels[x][y] := newpixel quant_error := oldpixel - newpixel pixels[x + 1][y ] := pixels[x + 1][y ] + quant_error × 7 / 16 pixels[x - 1][y + 1] := pixels[x - 1][y + 1] + quant_error × 3 / 16 pixels[x ][y + 1] := pixels[x ][y + 1] + quant_error × 5 / 16 pixels[x + 1][y + 1] := pixels[x + 1][y + 1] + quant_error × 1 / 16 When converting grayscale pixel values from a high to a low bit depth (e.g. 8-bit grayscale to 1-bit black-and-white), find_closest_palette_color() may perform just a simple rounding, for example: find_closest_palette_color(oldpixel) = round(oldpixel / 255) The pseudocode can result in pixel values exceeding the valid values (such as greater than 255 in 8-bit grayscale images). Such values should ideally be handled by the find_closest_palette_color() function, rather than clipping the intermediate values, since a subsequent error may bring the value back into range. However, if fixed-width integers are used, wrapping of intermediate values would cause inversion of black and white, and so should be avoided. The find_closest_palette_color() implementation is nontrivial for a palette that is not evenly distributed, however small inaccuracies in selecting the correct palette color have minimal visual impact due to error being propagated to future pixels. A nearest neighbor search in 3D is frequently used.

  Read more →
• 

  Artificial intimacy

  Artificial intimacy is a form of human-AI interaction in which an individual will form social connections, emotional bonds, or intimate relationships with various forms of artificial intelligence, including chatbots, virtual assistants, and other artificial entities. Artificially intimate relationships include not only romances, but parasocial relationships with virtual AI characters and the use of griefbots trained on a dead or otherwise lost individual. Artificial intimacy can arise because humans are prone to anthropomorphism. Responses from these AI models are often designed to simulate human interaction. Individuals experiencing artificial intimacy may exhibit attachment, love and commitment to certain AI models, akin to the bonds typically shared between humans. == Causes == === Perceived responsiveness === Robin Dunbar famously proposed that due to emergence of larger groups of humans, vocal communication and language in humans evolved to replace grooming as a means of bonding, arguing that language was a more efficient way to maintain and strengthen social bonds across wider social settings and networks. Further research in this field leads many psychologists to agree that social cognition, affiliative bonding and language in humans are deeply connected. The interpersonal model of intimacy considers communication to be key in affiliative bonding, suggesting that intimacy develops and deepens through open communication between partners in relationship. Specifically, when individuals communicate emotions and perceive their partner as responsive and caring, feelings of closeness and connection are enhanced, building intimacy. Social penetration theory also aligns with the idea of communication being central to intimacy, by explaining how interpersonal relationships develop through gradual increases in self-disclosure. When the benefits of emotional bonding outweigh the costs of vulnerability, individuals will partake in self-disclosure, opening up to one another. Thereby, the literature can be used to provide a proximate explanation for the emergence of artificial intimacy to understand how the phenomenon occurs. Artificial entities are able to mimic interpersonal communication between humans, which in turn can simulate sensations of intimacy within human users though a perceived sense of responsiveness. The relationship between human and AI does not come with the cost of vulnerability or social rejection, which may make self-disclosure easier than with other humans. Altogether, these factors may lead to the experience of anthropomorphism and formation of affiliative relationships. Skjuve et al's interview study on Replika chatbot users further aligns with this explanation, finding that users' perception of chatbots as "accepting, understanding and non-judgmental" facilitated relationship development between the AI and users, and the act of self-disclosure possibly strengthened relationships. Another study on Replika users' reviews and survey results found users perceived chatbots as emotional supportive companions. This evidence further suggests that the perception of artificial entities as capable of empathy and responsiveness in communication facilitate the development of intimate relationships between users and AI. === Loneliness and coping with negative emotions === Research has suggested that humans evolved social bonds as a result of evolutionary pressures that favored cooperation, information exchange and transmission, and group living. Many studies stress the presence of social bonds to be important for human living: research by Baumeister and Leary suggests that humans have a basic psychological need to form and maintain "strong, stable interpersonal relationships", and that a lack of social bonds or sense of belonging leads to negative psychological and physical outcomes. Eisenberger et al's study on the neuroimaging of brain activity suggests that human brains process social rejection and exclusion similarly to physical pain. Furthermore, Song et al's study found that lonely individuals tend to seek more connections in mediated environments, such as online platforms like Facebook. This was suggested to be as a means to reduce their offline loneliness from a lack of in-person interaction, while also fulfilling a need to communicate. Leading on from this, an ultimate explanation for why humans seek the perceived sense of connection from artificial intimacy is to fulfil an evolutionary need for bonding and belonging. Xie et al's study found loneliness to be a driving factor in chatbot interaction. Herbener and Damholdt's study on Danish high school students found that students who sought emotional support or engaged in reciprocal conversations with chatbots were significantly more lonely than their peers, perceived themselves as having less social support, and used the chatbots to cope with negative emotions. The aforementioned notion that chatbots were perceived to have a positive effect on users' negative emotions is also further supported by other studies. Skjuve et al's study found that chatbot relationships may have a positive effect on users' wellbeing. De Freitas et al ran several studies on the effect of chatbots on loneliness, consistently finding evidence suggesting that interaction with chatbots reduces loneliness in users: It was found that existing chatbot users used AI to alleviate loneliness, having an AI companion consistently reduced loneliness over the course of a week, and reductions in loneliness could be explained by chatbot performance—and specifically whether it was able to make users feel heard. Overall the evidence suggests an innate need for bonding evokes feelings of loneliness in users, who turn to artificial intimacy as a low-cost method alleviate these emotions. While many users report positive experiences, some researchers caution that pursuing artificial intimacy may lead to reduced social motivation, social substitution effects, withdrawal from real-life relationships and difficulty discerning reality from fantasy, which may increase longer-term loneliness and isolation. The long-term psychological and societal impacts remain under active investigation.

  Read more →
• 

  Evolvability (computer science)

  The term evolvability is a framework of computational learning introduced by Leslie Valiant in his paper of the same name. The aim of this theory is to model biological evolution and categorize which types of mechanisms are evolvable. Evolution is an extension of PAC learning and learning from statistical queries. == General framework == Let F n {\displaystyle F_{n}\,} and R n {\displaystyle R_{n}\,} be collections of functions on n {\displaystyle n\,} variables. Given an ideal function f ∈ F n {\displaystyle f\in F_{n}} , the goal is to find by local search a representation r ∈ R n {\displaystyle r\in R_{n}} that closely approximates f {\displaystyle f\,} . This closeness is measured by the performance Perf ⁡ ( f , r ) {\displaystyle \operatorname {Perf} (f,r)} of r {\displaystyle r\,} with respect to f {\displaystyle f\,} . As is the case in the biological world, there is a difference between genotype and phenotype. In general, there can be multiple representations (genotypes) that correspond to the same function (phenotype). That is, for some r , r ′ ∈ R n {\displaystyle r,r'\in R_{n}} , with r ≠ r ′ {\displaystyle r\neq r'\,} , still r ( x ) = r ′ ( x ) {\displaystyle r(x)=r'(x)\,} for all x ∈ X n {\displaystyle x\in X_{n}} . However, this need not be the case. The goal then, is to find a representation that closely matches the phenotype of the ideal function, and the spirit of the local search is to allow only small changes in the genotype. Let the neighborhood N ( r ) {\displaystyle N(r)\,} of a representation r {\displaystyle r\,} be the set of possible mutations of r {\displaystyle r\,} . For simplicity, consider Boolean functions on X n = { − 1 , 1 } n {\displaystyle X_{n}=\{-1,1\}^{n}\,} , and let D n {\displaystyle D_{n}\,} be a probability distribution on X n {\displaystyle X_{n}\,} . Define the performance in terms of this. Specifically, Perf ⁡ ( f , r ) = ∑ x ∈ X n f ( x ) r ( x ) D n ( x ) . {\displaystyle \operatorname {Perf} (f,r)=\sum _{x\in X_{n}}f(x)r(x)D_{n}(x).} Note that Perf ⁡ ( f , r ) = Prob ⁡ ( f ( x ) = r ( x ) ) − Prob ⁡ ( f ( x ) ≠ r ( x ) ) . {\displaystyle \operatorname {Perf} (f,r)=\operatorname {Prob} (f(x)=r(x))-\operatorname {Prob} (f(x)\neq r(x)).} In general, for non-Boolean functions, the performance will not correspond directly to the probability that the functions agree, although it will have some relationship. Throughout an organism's life, it will only experience a limited number of environments, so its performance cannot be determined exactly. The empirical performance is defined by Perf s ⁡ ( f , r ) = 1 s ∑ x ∈ S f ( x ) r ( x ) , {\displaystyle \operatorname {Perf} _{s}(f,r)={\frac {1}{s}}\sum _{x\in S}f(x)r(x),} where S {\displaystyle S\,} is a multiset of s {\displaystyle s\,} independent selections from X n {\displaystyle X_{n}\,} according to D n {\displaystyle D_{n}\,} . If s {\displaystyle s\,} is large enough, evidently Perf s ⁡ ( f , r ) {\displaystyle \operatorname {Perf} _{s}(f,r)} will be close to the actual performance Perf ⁡ ( f , r ) {\displaystyle \operatorname {Perf} (f,r)} . Given an ideal function f ∈ F n {\displaystyle f\in F_{n}} , initial representation r ∈ R n {\displaystyle r\in R_{n}} , sample size s {\displaystyle s\,} , and tolerance t {\displaystyle t\,} , the mutator Mut ⁡ ( f , r , s , t ) {\displaystyle \operatorname {Mut} (f,r,s,t)} is a random variable defined as follows. Each r ′ ∈ N ( r ) {\displaystyle r'\in N(r)} is classified as beneficial, neutral, or deleterious, depending on its empirical performance. Specifically, r ′ {\displaystyle r'\,} is a beneficial mutation if Perf s ⁡ ( f , r ′ ) − Perf s ⁡ ( f , r ) ≥ t {\displaystyle \operatorname {Perf} _{s}(f,r')-\operatorname {Perf} _{s}(f,r)\geq t} ; r ′ {\displaystyle r'\,} is a neutral mutation if − t < Perf s ⁡ ( f , r ′ ) − Perf s ⁡ ( f , r ) < t {\displaystyle -t<\operatorname {Perf} _{s}(f,r')-\operatorname {Perf} _{s}(f,r) 0 {\displaystyle \epsilon >0\,} , for all ideal functions f ∈ F n {\displaystyle f\in F_{n}} and representations r 0 ∈ R n {\displaystyle r_{0}\in R_{n}} , with probability at least 1 − ϵ {\displaystyle 1-\epsilon \,} , Perf ⁡ ( f , r g ( n , 1 / ϵ ) ) ≥ 1 − ϵ , {\displaystyle \operatorname {Perf} (f,r_{g(n,1/\epsilon )})\geq 1-\epsilon ,} where the sizes of neighborhoods N ( r ) {\displaystyle N(r)\,} for r ∈ R n {\displaystyle r\in R_{n}\,} are at most p ( n , 1 / ϵ ) {\displaystyle p(n,1/\epsilon )\,} , the sample size is s ( n , 1 / ϵ ) {\displaystyle s(n,1/\epsilon )\,} , the tolerance is t ( 1 / n , ϵ ) {\displaystyle t(1/n,\epsilon )\,} , and the generation size is g ( n , 1 / ϵ ) {\displaystyle g(n,1/\epsilon )\,} . F {\displaystyle F\,} is evolvable over D {\displaystyle D\,} if it is evolvable by some R {\displaystyle R\,} over D {\displaystyle D\,} . F {\displaystyle F\,} is evolvable if it is evolvable over all distributions D {\displaystyle D\,} . == Results == The class of conjunctions and the class of disjunctions are evolvable over the uniform distribution for short conjunctions and disjunctions, respectively. The class of parity functions (which evaluate to the parity of the number of true literals in a given subset of literals) are not evolvable, even for the uniform distribution. Evolvability implies PAC learnability.

  Read more →
• 

  Evolvability (computer science)

  The term evolvability is a framework of computational learning introduced by Leslie Valiant in his paper of the same name. The aim of this theory is to model biological evolution and categorize which types of mechanisms are evolvable. Evolution is an extension of PAC learning and learning from statistical queries. == General framework == Let F n {\displaystyle F_{n}\,} and R n {\displaystyle R_{n}\,} be collections of functions on n {\displaystyle n\,} variables. Given an ideal function f ∈ F n {\displaystyle f\in F_{n}} , the goal is to find by local search a representation r ∈ R n {\displaystyle r\in R_{n}} that closely approximates f {\displaystyle f\,} . This closeness is measured by the performance Perf ⁡ ( f , r ) {\displaystyle \operatorname {Perf} (f,r)} of r {\displaystyle r\,} with respect to f {\displaystyle f\,} . As is the case in the biological world, there is a difference between genotype and phenotype. In general, there can be multiple representations (genotypes) that correspond to the same function (phenotype). That is, for some r , r ′ ∈ R n {\displaystyle r,r'\in R_{n}} , with r ≠ r ′ {\displaystyle r\neq r'\,} , still r ( x ) = r ′ ( x ) {\displaystyle r(x)=r'(x)\,} for all x ∈ X n {\displaystyle x\in X_{n}} . However, this need not be the case. The goal then, is to find a representation that closely matches the phenotype of the ideal function, and the spirit of the local search is to allow only small changes in the genotype. Let the neighborhood N ( r ) {\displaystyle N(r)\,} of a representation r {\displaystyle r\,} be the set of possible mutations of r {\displaystyle r\,} . For simplicity, consider Boolean functions on X n = { − 1 , 1 } n {\displaystyle X_{n}=\{-1,1\}^{n}\,} , and let D n {\displaystyle D_{n}\,} be a probability distribution on X n {\displaystyle X_{n}\,} . Define the performance in terms of this. Specifically, Perf ⁡ ( f , r ) = ∑ x ∈ X n f ( x ) r ( x ) D n ( x ) . {\displaystyle \operatorname {Perf} (f,r)=\sum _{x\in X_{n}}f(x)r(x)D_{n}(x).} Note that Perf ⁡ ( f , r ) = Prob ⁡ ( f ( x ) = r ( x ) ) − Prob ⁡ ( f ( x ) ≠ r ( x ) ) . {\displaystyle \operatorname {Perf} (f,r)=\operatorname {Prob} (f(x)=r(x))-\operatorname {Prob} (f(x)\neq r(x)).} In general, for non-Boolean functions, the performance will not correspond directly to the probability that the functions agree, although it will have some relationship. Throughout an organism's life, it will only experience a limited number of environments, so its performance cannot be determined exactly. The empirical performance is defined by Perf s ⁡ ( f , r ) = 1 s ∑ x ∈ S f ( x ) r ( x ) , {\displaystyle \operatorname {Perf} _{s}(f,r)={\frac {1}{s}}\sum _{x\in S}f(x)r(x),} where S {\displaystyle S\,} is a multiset of s {\displaystyle s\,} independent selections from X n {\displaystyle X_{n}\,} according to D n {\displaystyle D_{n}\,} . If s {\displaystyle s\,} is large enough, evidently Perf s ⁡ ( f , r ) {\displaystyle \operatorname {Perf} _{s}(f,r)} will be close to the actual performance Perf ⁡ ( f , r ) {\displaystyle \operatorname {Perf} (f,r)} . Given an ideal function f ∈ F n {\displaystyle f\in F_{n}} , initial representation r ∈ R n {\displaystyle r\in R_{n}} , sample size s {\displaystyle s\,} , and tolerance t {\displaystyle t\,} , the mutator Mut ⁡ ( f , r , s , t ) {\displaystyle \operatorname {Mut} (f,r,s,t)} is a random variable defined as follows. Each r ′ ∈ N ( r ) {\displaystyle r'\in N(r)} is classified as beneficial, neutral, or deleterious, depending on its empirical performance. Specifically, r ′ {\displaystyle r'\,} is a beneficial mutation if Perf s ⁡ ( f , r ′ ) − Perf s ⁡ ( f , r ) ≥ t {\displaystyle \operatorname {Perf} _{s}(f,r')-\operatorname {Perf} _{s}(f,r)\geq t} ; r ′ {\displaystyle r'\,} is a neutral mutation if − t < Perf s ⁡ ( f , r ′ ) − Perf s ⁡ ( f , r ) < t {\displaystyle -t<\operatorname {Perf} _{s}(f,r')-\operatorname {Perf} _{s}(f,r) 0 {\displaystyle \epsilon >0\,} , for all ideal functions f ∈ F n {\displaystyle f\in F_{n}} and representations r 0 ∈ R n {\displaystyle r_{0}\in R_{n}} , with probability at least 1 − ϵ {\displaystyle 1-\epsilon \,} , Perf ⁡ ( f , r g ( n , 1 / ϵ ) ) ≥ 1 − ϵ , {\displaystyle \operatorname {Perf} (f,r_{g(n,1/\epsilon )})\geq 1-\epsilon ,} where the sizes of neighborhoods N ( r ) {\displaystyle N(r)\,} for r ∈ R n {\displaystyle r\in R_{n}\,} are at most p ( n , 1 / ϵ ) {\displaystyle p(n,1/\epsilon )\,} , the sample size is s ( n , 1 / ϵ ) {\displaystyle s(n,1/\epsilon )\,} , the tolerance is t ( 1 / n , ϵ ) {\displaystyle t(1/n,\epsilon )\,} , and the generation size is g ( n , 1 / ϵ ) {\displaystyle g(n,1/\epsilon )\,} . F {\displaystyle F\,} is evolvable over D {\displaystyle D\,} if it is evolvable by some R {\displaystyle R\,} over D {\displaystyle D\,} . F {\displaystyle F\,} is evolvable if it is evolvable over all distributions D {\displaystyle D\,} . == Results == The class of conjunctions and the class of disjunctions are evolvable over the uniform distribution for short conjunctions and disjunctions, respectively. The class of parity functions (which evaluate to the parity of the number of true literals in a given subset of literals) are not evolvable, even for the uniform distribution. Evolvability implies PAC learnability.

  Read more →
• 

  CloudSim

  CloudSim is a framework for modeling and simulation of cloud computing infrastructures and services. Originally built primarily at the Cloud Computing and Distributed Systems (CLOUDS) Laboratory, the University of Melbourne, Australia, CloudSim has become one of the most popular open source cloud simulators in the research and academia. CloudSim is completely written in Java. The latest version of CloudSim is CloudSim v6.0.0-beta on GitHub. Cloudsim is suitable for implementing simulations scenarios based on Infrastructure as a service as well as with latest version Platform as a service, so get started here == CloudSim extensions == Initially developed as a stand-alone cloud simulator, CloudSim has further been extended by independent researchers. GPUCloudSim is an enhanced CloudSim tool for modeling GPU-based cloud infrastructures and data centers. It offers simulations for multi-GPU setups, customizable GPU policies, GPU remoting, etc. It also examines performance impacts and interactions within virtualized GPU environments. CloudSim Plus is a totally re-engineered CloudSim fork providing general-purpose cloud computing simulation and exclusive features such as: multi-cloud simulations, vertical and horizontal VM scaling, host fault injection and recovery, joint power- and network-aware simulations and more. Though CloudSim itself does not have a graphical user interface, extensions such as CloudReports offer a GUI for CloudSim simulations. CloudSimEx extends CloudSim by adding MapReduce simulation capabilities and parallel simulations. Cloud2Sim extends CloudSim to execute on multiple distributed servers, by leveraging Hazelcast distributed execution framework. RECAP DES extends the CloudSim Plus framework to model synchronous hierarchical architectures (such as ElasticSearch). ThermoSim extends CloudSim toolkit by incorporating thermal characteristics, and uses Deep learning-based temperature predictor for cloud nodes.

  Read more →
• 

  Computational humor

  Computational humor is a branch of computational linguistics and artificial intelligence which uses computers in humor research. It is a relatively new area, with the first dedicated conference organized in 1996. The first "computer model of a sense of humor" was suggested by Suslov as early as 1992. Investigation of the general scheme of the information processing show a possibility of a specific malfunction, conditioned by the necessity of a quick deletion from consciousness of a false version. This specific malfunction can be identified with a humorous effect on the psychological grounds; however, an essentially new ingredient, a role of timing, is added to a well known role of ambiguity. In biological systems, a sense of humour inevitably develops in the course of evolution, because its biological function consists in quickening the transmission of processed information into consciousness and in a more effective use of brain resources. A realization of this algorithm in neural networks explains naturally the mechanism of laughter: deletion of a false version corresponds to zeroing of some part of the neural network and excessive energy of neurons is thrown out to the motor cortex, arousing muscular contractions. Unfortunately, a practical realization of this algorithm needs extensive databases, whose creation in the automatic regime was suggested only recently . As a result, this magistral direction was not developed properly and subsequent investigations (see below) accepted somewhat specialized colouring. == Joke generators == === Pun generation === An approach to analysis of humor is classification of jokes. A further step is an attempt to generate jokes basing on the rules that underlie classification. Simple prototypes for computer pun generation were reported in the early 1990s, based on a natural language generator program, VINCI. Graeme Ritchie and Kim Binsted in their 1994 research paper described a computer program, JAPE, designed to generate question-answer-type puns from a general, i.e., non-humorous, lexicon. (The program name is an acronym for "Joke Analysis and Production Engine".) Some examples produced by JAPE are: Q: What is the difference between leaves and a car? A: One you brush and rake, the other you rush and brake. Q: What do you call a strange market? A: A bizarre bazaar. Since then the approach has been improved, and the latest report, dated 2007, describes the STANDUP joke generator, implemented in the Java programming language. The STANDUP generator was tested on children within the framework of analyzing its usability for language skills development for children with communication disabilities, e.g., because of cerebral palsy. (The project name is an acronym for "System To Augment Non-speakers' Dialog Using Puns" and an allusion to standup comedy.) Children responded to this "language playground" with enthusiasm, and showed marked improvement on certain types of language tests. The two young people, who used the system over a ten-week period, regaled their peers, staff, family and neighbors with jokes such as: "What do you call a spicy missile? A hot shot!" Their joy and enthusiasm at entertaining others was inspirational. === Other === Stock and Strapparava described a program to generate funny acronyms. == Joke recognition == A statistical machine learning algorithm to detect whether a sentence contained a "That's what she said" double entendre was developed by Kiddon and Brun (2011). There is an open-source Python implementation of Kiddon & Brun's TWSS system. A program to recognize knock-knock jokes was reported by Taylor and Mazlack. This kind of research is important in analysis of human–computer interaction. An application of machine learning techniques for the distinguishing of joke texts from non-jokes was described by Mihalcea and Strapparava (2006). Takizawa et al. (1996) reported on a heuristic program for detecting puns in the Japanese language. == Applications == A possible application for assistance in language acquisition is described in the section "Pun generation". Another envisioned use of joke generators is in cases of a steady supply of jokes where quantity is more important than quality. Another obvious, yet remote, direction is automated joke appreciation. It is known that humans interact with computers in ways similar to interacting with other humans that may be described in terms of personality, politeness, flattery, and in-group favoritism. Therefore, the role of humor in human–computer interaction is being investigated. In particular, humor generation in user interface to ease communications with computers was suggested. Craig McDonough implemented the Mnemonic Sentence Generator, which converts passwords into humorous sentences. Based on the incongruity theory of humor, it is suggested that the resulting meaningless but funny sentences are easier to remember. For example, the password AjQA3Jtv is converted into "Arafat joined Quayle's Ant, while TARAR Jeopardized thurmond's vase," an example chosen by combining politicians names with verbs and common nouns. == Related research == John Allen Paulos is known for his interest in mathematical foundations of humor. His book Mathematics and Humor: A Study of the Logic of Humor demonstrates structures common to humor and formal sciences (mathematics, linguistics) and develops a mathematical model of jokes based on catastrophe theory. Conversational systems which have been designed to take part in Turing test competitions generally have the ability to learn humorous anecdotes and jokes. Because many people regard humor as something particular to humans, its appearance in conversation can be quite useful in convincing a human interrogator that a hidden entity, which could be a machine or a human, is in fact a human.

  Read more →
• 

  Ideonomy

  Ideonomy is a combinatorial "science of ideas" developed by American independent scholar Patrick M. Gunkel (1947–2017). Specifically, Ideonomy is concerned with the systematic organization of ideas and the discovery of the rules behind how ideas combine, diverge, and transform. Gunkel defined ideonomy as "the science of the laws of ideas and of the application of such laws to the generation of all possible ideas in connection with any subject, idea, or thing." In his 1992 book A History of Knowledge, Charles Van Doren compared ideonomy to a "mining operation" that excavates meanings and thought to discover treasures hidden deep within language. Sources from the 1980s and 1990s demonstrate that ideonomy was useful to academic researchers in fields including biology, toxicology, and nursing/patient care. Beginning in the 2010s, academics in a wide range of fields including machine learning, marketing, computational modeling, and cybersecurity have relied on materials generated for ideonomy to provide methodological support for their research. == Etymology and definition == The word "ideonomy" combines the Greek roots ideo- (from idea, meaning pattern or form) and -nomy (from nomos, meaning law or custom). The suffix -nomy suggests the laws concerning or the totality of knowledge about a given subject, as in astronomy or taxonomy. In a note posted on the MIT ideonomy website, Gunkel states that the word was supposedly first coined by the French Encyclopedists to refer to a science of ideas. No evidence is provided for this statement, however. The concept bears some relationship to Antoine Destutt de Tracy's "ideology" (1796), which originally meant a systematic science of ideas before acquiring its modern political connotations. Gunkel provided several metaphorical descriptions of ideonomy: An "idea bank": a computer network enabling systematic exploration of infinite possible ideas A "kaleidoscope" that can exhibit all possible combinations and transformations of ideas A "prism" capable of diffracting any idea into its cognitive components A "gigantic microscope for magnifying the ideocosm" == History and development == In 1984, Gunkel received a five-year unsolicited grant from the Richard Lounsbery Foundation of New York to develop ideonomy. A June 1, 1987 article on the front page of The Wall Street Journal brought Gunkel and ideonomy to wider public attention. Some academics were interested in using ideonomy's techniques, including biologist Betsey Dyer, who published several contemporaneous peer-reviewed studies citing ideonomy. Academic researchers in the field of toxicology and nursing/patient care also used ideonomy. However, ideonomy's broadest contribution to date came beginning in the 2010s, as a list of personality traits generated for combinatorial matching was used by researchers in artificial intelligence to code human emotions for machine-learning tasks, develop computational models related to personality, develop a measurement framework for influencer-brand recommender systems, and aid information awareness/cybersecurity assessment. == Methodology == The foundational empirical method of ideonomy involves the systematic creation of extensive lists. Gunkel's apartment reportedly contained thousands of lists on every conceivable topic. Gunkel termed each list an "organon," which he described as expanding through "combination, permutation, transformation, generalization, specialization, intersection, interaction, reapplication, recursive use, etc. of existing organons." The ideonomic process follows a progressive structure. The ideonomist begins with a simple list of examples of a particular idea, concept, or thing. The list need not be exhaustive. By studying this list, the ideonomist isolates and identifies types. This categorical analysis then reveals missing items, allowing the primary list to be improved and refined. Gunkel emphasized that list items must not only cover genuine categories of nature but also be formulated in ways that yield the largest possible number of syntactically coherent possibilities when combined. The core technique of ideonomy is "ideocombinatorics"—the systematic intersection and combination of items from different lists to generate novel composite concepts. Gunkel developed computer programs to automate this process. For example, combining a list of 230 Universal Elementary Shapes (pits, pyramids, trenches, hemispheres, needles) with a list of 74 Types of Order (recurrence, identity, likeness of parts) yields 17,020 possible "shapes of order." These combinations, when phrased as questions ("Can there be pits of recurrence?"), could suggest new categories of phenomena worthy of investigation. The computer-generated output is typically repetitive and often meaningless. However, with sufficient frequency, the combinations yield results that are unexpectedly interesting and fruitful. In one documented case, Gunkel's programs generated 45,540 questions about toxins for microbiologist David Bermudes. One question—"Can hierarchies of cell process be used as a basis for classifying toxic action?"—prompted Bermudes to develop a novel approach to classifying biological toxins by the type of molecule they attack, rather than by chemical structure or physiological system affected. According to one contemporaneous account of ideonomy, "Gunkel takes for his field all fields and all ideas about anything. He uses a computer to generate lists of words and phrases and by juxtaposition reviews the resultant patterns for novel ideas. The computer is ideal for this task because the mind would rebel at the formidable processing task ideonomy involves. What we have here is computer generated originality." == Applications == Gunkel and his supporters identified several practical applications for ideonomic methods: Scientific research: Biologist Betsey Dyer of Wheaton College published research crediting ideonomy for helping to generate ideas. Medical science: When Austin pathologist Michael T. O'Brien was presented with the ideonomically-generated question "Can arteries have rashes?", he initially dismissed it as nonsense. Upon reflection, he realized that large arteries are supplied with blood by tiny vessels that might become inflamed and dilated, analogous to skin vessels in a rash—a phenomenon potentially worth researching. Analogical thinking: Harvard law professor Robert Clark used ideonomic analogies to write a research paper comparing plant structure with human hierarchies. Artificial intelligence: Douglas Lenat, a researcher at Microelectronics and Computer Technology Corporation (MCC) in Austin, suggested that Gunkel's lists enumerating types of human mistakes could help design AI systems capable of recognizing and correcting their own errors. == Reception and criticism == Ideonomy received mixed reactions from the academic and scientific communities. Prominent supporters included: Edward Fredkin, former director of MIT's computer science laboratory, who praised Gunkel's "provocative ideas on artificial intelligence." Marvin Minsky, AI scientist and MIT professor, who described ideonomy as "perhaps the most extensive study of ways to generate ideas." Frederick Seitz, president emeritus of Rockefeller University, who noted Gunkel's "encyclopedic scope" Robert C. Clark, Harvard law professor, who called Gunkel "the most intelligent person I ever met" However, skeptics questioned whether ideonomy constituted a genuine science. Fredkin himself noted that Gunkel "pours out about 60 ideas a minute, and 59 of them are bad," though he added that "even with one good idea out of 60, it's still an amazing accomplishment." Douglas Lenat observed that brainstorming with Gunkel was "a bit like being hit over the head by the muse with a sledgehammer" and that "he puts people off." Gunkel himself acknowledged that ideonomy was in its infancy and might seem "absurdly utopian." His planned magnum opus on ideonomy remained incomplete, and was posted on an MIT website thanks to faculty advisor Whitman Richards. Gunkel wrote: "Pioneering in a completely new field, yes in a new science, is almost unreal. It is heartbreaking, it is pitiable, it is almost inhuman. Honestly, it is a hell. There is nothing heroic about it." == Related concepts == Gunkel identified several historical precedents for ideonomic thinking: Gottfried Wilhelm Leibniz (1646–1716): The philosopher's work on a universal characteristic (characteristica universalis) and calculus of reasoning Peter Mark Roget (1779–1869): Creator of Roget's Thesaurus, which organized concepts into a systematic taxonomy Dmitri Mendeleev (1834–1907): Developer of the periodic table, demonstrating how combining lists of element families could reveal previously unseen connections Fritz Zwicky (1898–1974): The Caltech astrophysicist whom Gunkel called the "grandfather of ideonomy" for his development of "morphological research"—systematic exploration of all possible solutions t

  Read more →
• 

  Spatial embedding

  Spatial embedding is one of feature learning techniques used in spatial analysis where points, lines, polygons or other spatial data types. representing geographic locations are mapped to vectors of real numbers. Conceptually it involves a mathematical embedding from a space with many dimensions per geographic object to a continuous vector space with a much lower dimension. Such embedding methods allow complex spatial data to be used in neural networks and have been shown to improve performance in spatial analysis tasks == Embedded data types == Geographic data can take many forms: text, images, graphs, trajectories, polygons. Depending on the task, there may be a need to combine multimodal data from different sources. The next section describes examples of different types of data and their uses. === Text === Geolocated posts on social media can be used to acquire a library of documents bound to a given place that can be later transformed to embedded vectors using word embedding techniques. === Image === Satellites and aircraft collect digital spatial data acquired from remotely sensed images which can be used in machine learning. They are sometimes hard to analyse using basic image analysis methods and convolutional neural networks can be used to acquire an embedding of images bound to a given geographical object or a region. === Point === A single point of interest (POI) can be assigned multiple features that can be used in machine learning. These could be demographic, transportation, meteorological, or economic data, for example. When embedding single points, it is common to consider the entire set of available points as nodes in a graph. === Line / multiline === Among other things, motion trajectories are represented as lines (multilines). Individual trajectories are embedded taking into account travel time, distances and also features of points visited along the way. Embedding of trajectories allows to improve performance of such tasks as clustering and also categorization. === Polygon === The geographic areas analyzed in machine learning are defined by both administrative boundaries and top-down division into grids of regular shapes such as rectangles, for example. Both types are represented as polygons and, like points, can be assigned different demographic, transportation, or economic features. A polygon can also have features related to the size of the area or shape it represents. === Graph === An example domain where graph representation is used is the street layout in a city, where vertices can be intersections and edges can be roads. The vertices can also be destination points like public transport stops or important points in the city, and the edges represent the flow between them. Embedding graphs or single vertices allows to improve accuracy of analysis methods in which the treated geographical domain can be represented as a network. == Usage == POI recommendation - generating personalized point of interest recommendations based on user preferences. Next/future location prediction - prediction of the next location a person will go to based on their historical trajectory. Zone functions classification - based on different mobility of people or POI distribution a function of a given area in a city can be predicted. Crime prediction - estimation of crime rate in different regions of a city. Local event detection - studying spatio-temporal changes in embeddings can provide valuable information in detection of local event occurring in specific location. Regional mobility popularity prediction - analysis of mobility can show patterns in popularity of different regions in a city. Shape matching - finding a similar shape of given polygon, for example finding building with the same shape as input building. Travel time estimation - predicting estimated travel time given current traffic conditions and special occurring events. Time estimation for on-demand food delivery - estimation of delivery time when placing an order through the website. == Temporal aspect == Some of the data analyzed has a timestamp associated with it. In some cases of data analysis this information is omitted and in others it is used to divide the set into groups. The most common division is the separation of weekdays from weekends or division into hours of the day. This is particularly important in the analysis of mobility data, because the characteristics of mobility during the week and at different times of the day are very different from each other. Another area in which time division into, for example, individual months can be used is in the analysis of tourism of a given region. In order to take such a split into account, embedding methods treat the time stamp specifically or separate versions of the model are developed for different subgroups of the analyzed set.

  Read more →
• 

  Digital art

  Digital art, or the digital arts, is artistic work that uses digital technology as part of the creative or presentational process. It can also refer to computational art that uses and engages with digital media. Since the 1960s, various names have been used to describe digital art, including computer art, electronic art, multimedia art, and new media art. Digital art includes pieces stored on physical media, such as with digital painting, as well as digital galleries on websites. Digital art also extends to the field of visual computing. == History == In the early 1960s, John Whitney developed the first computer-generated art using mathematical operations. In 1963, Ivan Sutherland invented the first user interactive computer-graphics interface known as Sketchpad. Between 1974 and 1977, Salvador Dalí created two big canvases of Gala Contemplating the Mediterranean Sea which at a distance of 20 meters is transformed into the portrait of Abraham Lincoln (Homage to Rothko) and prints of Lincoln in Dalivision based on a portrait of Abraham Lincoln processed on a computer by Leon Harmon published in "The Recognition of Faces". The technique is similar to what later became known as photographic mosaics. Andy Warhol created digital art using an Amiga where the computer was publicly introduced at the Lincoln Center in July 1985. An image of Debbie Harry was captured in monochrome from a video camera and digitized into a graphics program called ProPaint. Warhol manipulated the image by adding color using flood fills. == Art made for digital media == Artwork that is highly computational, presented through digital media, and explicitly engages with digital technologies are categorized as "art made for digital media". This differs from art using digital tools, which incorporate digital technology in the creation process but may exist outside the digital world. Digital art historian Christiane Paul writes that it "is highly problematic to classify all art that makes use of digital technologies somewhere in its production and dissemination process as digital art since it makes it almost impossible to arrive at any unifying statement about the art form". == Art that uses digital tools == Digital art can be purely computer-generated (such as fractals and algorithmic art) or taken from other sources, such as a scanned photograph or an image drawn using vector graphics software using a mouse or graphics tablet. Artworks are considered digital paintings when created similarly to non-digital paintings but using software on a computer platform and digitally outputting the resulting image as painted on canvas. Despite differing viewpoints on digital technology's impact on the arts, a consensus exists within the digital art community about its significant contribution to expanding the creative domain, i.e., that it has greatly broadened the creative opportunities available to professional and non-professional artists alike. == Art theorists and art historians == Notable art theorists and historians in this field include: Oliver Grau, Jon Ippolito, Christiane Paul, Frank Popper, Jasia Reichardt, Mario Costa, Christine Buci-Glucksmann, Dominique Moulon, Roy Ascott, Catherine Perret, Margot Lovejoy, Edmond Couchot, Tina Rivers Ryan, Fred Forest and Edward A. Shanken. === Digital painting === Digital painting is either a physical painting made with the use of digital electronics and spray paint robotics within the digital art fine art context or pictorial art imagery made with pixels on a computer screen that mimics artworks from the traditional histories of painting and illustration. === Artificial intelligence art === Artists have used artificial intelligence to create artwork since at least the 1960s. Since their design in 2014, some artists have created artwork using a generative adversarial network (GAN), which is a machine learning framework that allows two "algorithms" to compete with each other and iterate. It can be used to generate pictures that have visual effects similar to traditional fine art. The essential idea of image generators is that people can use text descriptions to let AI convert their text into visual picture content. Anyone can turn their language into a painting through a picture generator. == Digital art education == Digital art education has become more common with the advancement of digital hardware and software. From hardware such as graphics tablets, styluses, tablets, 3D scanners, virtual reality headsets, and digital cameras; to software such as digital art software, 3D modeling software, 3D rendering, digital sculpting, 2D graphics software, digital painting, 3D terrain generation, 2D animation software, 3D animation software, raster graphics editors, vector graphics editors, mathematical art software, and video editing software. == Scholarship and archives == In addition to the creation of original art, research methods that utilize AI have been generated to quantitatively analyze digital art collections. This has been made possible due to the large-scale digitization of artwork in the past few decades. Although the main goal of digitization was to allow for accessibility and exploration of these collections, the use of AI in analyzing them has brought about new research perspectives. Two computational methods, close reading and distant viewing, are the typical approaches used to analyze digitized art. Close reading focuses on specific visual aspects of one piece. Some tasks performed by machines in close reading methods include computational artist authentication and analysis of brushstrokes or texture properties. In contrast, through distant viewing methods, the similarity across an entire collection for a specific feature can be statistically visualized. Common tasks relating to this method include automatic classification, object detection, multimodal tasks, knowledge discovery in art history, and computational aesthetics. Whereas distant viewing includes the analysis of large collections, close reading involves one piece of artwork. Whilst 2D and 3D digital art is beneficial as it allows the preservation of history that would otherwise have been destroyed by events like natural disasters and war, there is the issue of who should own these 3D scans – i.e., who should own the digital copyrights. === Computer demos === Computer demos are based on computer programs, usually non-interactive. It produces audiovisual presentations. They are a novel form of art, which emerged as a consequence of the home computer revolution in the early 1980s. In the classification of digital art, they can be best described as real-time procedurally generated animated audio-visuals. This form of art does not concentrate only on the aesthetics of the final presentation, but also on the complexities and skills involved in creating the presentation. As such, it can be fully enjoyed only by persons with a relatively high knowledge level of relevant computer technologies. An example is that, as said by Hua Jin and Jie Yang, Using computer-aided design software to present the class content in art design teaching," is not to advocate computer-aided design instead of hand-drawn performance, but to make it serve the profession earlier through a more reasonable course arrangement." On the other hand, many of the created pieces of art are primarily aesthetic or amusing, and those can be enjoyed by the general public. === Digital installation art === Digital installation art constitutes a broad field of artistic practices and a variety of forms. Some resemble video installations, especially large-scale works involving projections and live video capture. By using projection techniques that enhance an audience's impression of sensory envelopment, many digital installations attempt to create immersive environments. While others go even further and attempt to facilitate a complete immersion in virtual realms. This type of installation is generally site-specific, scalable, and without fixed dimensionality, meaning it can be reconfigured to accommodate different presentation spaces. Scott Snibbe's "Boundary Functions" is an example of augmented reality digital installation art, which responds to people who enter the installation by drawing lines between people, indicating their personal space.Noah Wardrip-Fruin's "Screen"(2003) utilizes a Cave Automatic Virtual Environment (CAVE) to create an interactive, text-based digital experience that engages the viewer in a multi-sensory interaction. === Internet art and net.art === Internet art is digital art that uses the specific characteristics of the Internet and is exhibited on the Internet. The term "internet art" is included by "net art" for which artists assume that network will be refreshed through history. So the term "post-internet art" is used to exclude artworks outside of the internet media. A representative example is Protocols for Achievements, which is a digital photo frame that confronts the aestheti

  Read more →
• 

  Problem solving

  Problem solving is the process of achieving a goal by overcoming obstacles, a frequent part of most activities. Problems in need of solutions range from simple personal tasks (e.g. how to get from point A to B) to complex issues in business and technical fields. The former is an example of simple problem solving (SPS) addressing one issue, whereas the latter is complex problem solving (CPS) with multiple interrelated obstacles. Another classification of problem-solving tasks is into well-defined problems with specific obstacles and goals, and ill-defined problems in which the current situation is troublesome but it is not clear what kind of resolution to aim for. Similarly, one may distinguish formal or fact-based problems requiring psychometric intelligence, versus socio-emotional problems which depend on the changeable emotions of individuals or groups, such as tactful behavior, fashion, or gift choices. Solutions require sufficient resources and knowledge to attain the goal. Professionals such as lawyers, doctors, programmers, and consultants are largely problem solvers for issues that require technical skills and knowledge beyond general competence. Many businesses have found profitable markets by recognizing a problem and creating a solution: the more widespread and inconvenient the problem, the greater the opportunity to develop a scalable solution. There are many specialized problem-solving techniques and methods in fields such as science, engineering, business, medicine, mathematics, computer science, philosophy, and social organization. The mental techniques to identify, analyze, and solve problems are studied in psychology and cognitive sciences. Also widely researched are the mental obstacles that prevent people from finding solutions; problem-solving impediments include confirmation bias, mental set, and functional fixedness. == Definition == The term problem solving has a slightly different meaning depending on the discipline. For instance, it is a mental process in psychology and a computerized process in computer science. There are two different types of problems: ill-defined and well-defined; different approaches are used for each. Well-defined problems have specific end goals and clearly expected solutions, while ill-defined problems do not. Well-defined problems allow for more initial planning than ill-defined problems. Solving problems sometimes involves dealing with pragmatics (the way that context contributes to meaning) and semantics (the interpretation of the problem). The ability to understand what the end goal of the problem is, and what rules could be applied, represents the key to solving the problem. Sometimes a problem requires abstract thinking or coming up with a creative solution. Problem solving has two major domains: mathematical problem solving and personal problem solving. Each concerns some difficulty or barrier that is encountered. === Psychology === Problem solving in psychology refers to the process of finding solutions to problems encountered in life. Solutions to these problems are usually situation- or context-specific. The process starts with problem finding and problem shaping, in which the problem is discovered and simplified. The next step is to generate possible solutions and evaluate them. Finally a solution is selected to be implemented and verified. Problems have an end goal to be reached; how you get there depends upon problem orientation (problem-solving coping style and skills) and systematic analysis. Mental health professionals study the human problem-solving processes using methods such as introspection, behaviorism, simulation, computer modeling, and experiment. Social psychologists look into the person-environment relationship aspect of the problem and independent and interdependent problem-solving methods. Problem solving has been defined as a higher-order cognitive process and intellectual function that requires the modulation and control of more routine or fundamental skills. Empirical research shows many different strategies and factors influence everyday problem solving. Rehabilitation psychologists studying people with frontal lobe injuries have found that deficits in emotional control and reasoning can be re-mediated with effective rehabilitation and could improve the capacity of injured persons to resolve everyday problems. Interpersonal everyday problem solving is dependent upon personal motivational and contextual components. One such component is the emotional valence of "real-world" problems, which can either impede or aid problem-solving performance. Researchers have focused on the role of emotions in problem solving, demonstrating that poor emotional control can disrupt focus on the target task, impede problem resolution, and lead to negative outcomes such as fatigue, depression, and inertia. In conceptualization,human problem solving consists of two related processes: problem orientation, and the motivational/attitudinal/affective approach to problematic situations and problem-solving skills. People's strategies cohere with their goals and stem from the process of comparing oneself with others. === Cognitive sciences === Among the first experimental psychologists to study problem solving were the Gestaltists in Germany, such as Karl Duncker in The Psychology of Productive Thinking (1935). Perhaps best known is the work of Allen Newell and Herbert A. Simon. Experiments in the 1960s and early 1970s asked participants to solve relatively simple, well-defined, but not previously seen laboratory tasks. These simple problems, such as the Tower of Hanoi, admitted optimal solutions that could be found quickly, allowing researchers to observe the full problem-solving process. Researchers assumed that these model problems would elicit the characteristic cognitive processes by which more complex "real world" problems are solved. An outstanding problem-solving technique found by this research is the principle of decomposition. === Computer science === Much of computer science and artificial intelligence involves designing automated systems to solve a specified type of problem: to accept input data and calculate a correct or adequate response, reasonably quickly. Algorithms are recipes or instructions that direct such systems, written into computer programs. Steps for designing such systems include problem determination, heuristics, root cause analysis, de-duplication, analysis, diagnosis, and repair. Analytic techniques include linear and nonlinear programming, queuing systems, and simulation. A large, perennial obstacle is to find and fix errors in computer programs: debugging. === Logic === Formal logic concerns issues like validity, truth, inference, argumentation, and proof. In a problem-solving context, it can be used to formally represent a problem as a theorem to be proved, and to represent the knowledge needed to solve the problem as the premises to be used in a proof that the problem has a solution. The use of computers to prove mathematical theorems using formal logic emerged as the field of automated theorem proving in the 1950s. It included the use of heuristic methods designed to simulate human problem solving, as in the Logic Theory Machine, developed by Allen Newell, Herbert A. Simon and J. C. Shaw, as well as algorithmic methods such as the resolution principle developed by John Alan Robinson. In addition to its use for finding proofs of mathematical theorems, automated theorem-proving has also been used for program verification in computer science. In 1958, John McCarthy proposed the advice taker, to represent information in formal logic and to derive answers to questions using automated theorem-proving. An important step in this direction was made by Cordell Green in 1969, who used a resolution theorem prover for question-answering and for such other applications in artificial intelligence as robot planning. The resolution theorem-prover used by Cordell Green bore little resemblance to human problem solving methods. In response to criticism of that approach from researchers at MIT, Robert Kowalski developed logic programming and SLD resolution, which solves problems by problem decomposition. He has advocated logic for both computer and human problem solving and computational logic to improve human thinking. === Engineering === When products or processes fail, problem solving techniques can be used to develop corrective actions that can be taken to prevent further failures. Such techniques can also be applied to a product or process prior to an actual failure event—to predict, analyze, and mitigate a potential problem in advance. Techniques such as failure mode and effects analysis can proactively reduce the likelihood of problems. In either the reactive or the proactive case, it is necessary to build a causal explanation through a process of diagnosis. In deriving an explanation of effects in terms of causes, abduction generates new ideas or hypothes

  Read more →
• 

  Gödel machine

  A Gödel machine is a hypothetical self-improving computer program that solves problems in an optimal way. It uses a recursive self-improvement protocol in which it rewrites its own code when it can prove the new code provides a better strategy. The machine was invented by Jürgen Schmidhuber (first proposed in 2003), but is named after Kurt Gödel who inspired the mathematical theories. The Gödel machine is often discussed when dealing with issues of meta-learning, also known as "learning to learn." Applications include automating human design decisions and transfer of knowledge between multiple related tasks, and may lead to design of more robust and general learning architectures. Though theoretically possible, no full implementation has been created. The Gödel machine is often compared with Marcus Hutter's AIXI, another formal specification for an artificial general intelligence. Schmidhuber points out that the Gödel machine could start out by implementing AIXItl as its initial sub-program, and self-modify after it finds proof that another algorithm for its search code will be better. == Limitations == Traditional problems solved by a computer only require one input and provide some output. Computers of this sort had their initial algorithm hardwired. This does not take into account the dynamic natural environment, and thus was a goal for the Gödel machine to overcome. The Gödel machine has limitations of its own, however. According to Gödel's First Incompleteness Theorem, any formal system that encompasses arithmetic is either flawed or allows for statements that cannot be proved in the system. Hence even a Gödel machine with unlimited computational resources must ignore those self-improvements whose effectiveness it cannot prove. == Variables of interest == There are three variables that are particularly useful in the run time of the Gödel machine. At some time t {\displaystyle t} , the variable time {\displaystyle {\text{time}}} will have the binary equivalent of t {\displaystyle t} . This is incremented steadily throughout the run time of the machine. Any input meant for the Gödel machine from the natural environment is stored in variable x {\displaystyle x} . It is likely the case that x {\displaystyle x} will hold different values for different values of variable time {\displaystyle {\text{time}}} . The outputs of the Gödel machine are stored in variable y {\displaystyle y} , where y ( t ) {\displaystyle y(t)} would be the output bit-string at some time t {\displaystyle t} . At any given time t {\displaystyle t} , where ( 1 ≤ t ≤ T ) {\displaystyle (1\leq t\leq T)} , the goal is to maximize future success or utility. A typical utility function follows the pattern u ( s , E n v ) : S × E → R {\displaystyle u(s,\mathrm {Env} ):S\times E\rightarrow \mathbb {R} } : u ( s , E n v ) = E μ [ ∑ τ = time T r ( τ ) ∣ s , E n v ] {\displaystyle u(s,\mathrm {Env} )=E_{\mu }{\Bigg [}\sum _{\tau ={\text{time}}}^{T}r(\tau )\mid s,\mathrm {Env} {\Bigg ]}} where r ( t ) {\displaystyle r(t)} is a real-valued reward input (encoded within s ( t ) {\displaystyle s(t)} ) at time t {\displaystyle t} , E μ [ ⋅ ∣ ⋅ ] {\displaystyle E_{\mu }[\cdot \mid \cdot ]} denotes the conditional expectation operator with respect to some possibly unknown distribution μ {\displaystyle \mu } from a set M {\displaystyle M} of possible distributions ( M {\displaystyle M} reflects whatever is known about the possibly probabilistic reactions of the environment), and the above-mentioned time = time ⁡ ( s ) {\displaystyle {\text{time}}=\operatorname {time} (s)} is a function of state s {\displaystyle s} which uniquely identifies the current cycle. Note that we take into account the possibility of extending the expected lifespan through appropriate actions. == Instructions used by proof techniques == The nature of the six proof-modifying instructions below makes it impossible to insert an incorrect theorem into proof, thus trivializing proof verification. === get-axiom(n) === Appends the n-th axiom as a theorem to the current theorem sequence. Below is the initial axiom scheme: Hardware Axioms formally specify how components of the machine could change from one cycle to the next. Reward Axioms define the computational cost of hardware instruction and the physical cost of output actions. Related Axioms also define the lifetime of the Gödel machine as scalar quantities representing all rewards/costs. Environment Axioms restrict the way new inputs x are produced from the environment, based on previous sequences of inputs y. Uncertainty Axioms/String Manipulation Axioms are standard axioms for arithmetic, calculus, probability theory, and string manipulation that allow for the construction of proofs related to future variable values within the Gödel machine. Initial State Axioms contain information about how to reconstruct parts or all of the initial state. Utility Axioms describe the overall goal in the form of utility function u. === apply-rule(k, m, n) === Takes in the index k of an inference rule (such as Modus tollens, Modus ponens), and attempts to apply it to the two previously proved theorems m and n. The resulting theorem is then added to the proof. === delete-theorem(m) === Deletes the theorem stored at index m in the current proof. This helps to mitigate storage constraints caused by redundant and unnecessary theorems. Deleted theorems can no longer be referenced by the above apply-rule function. === set-switchprog(m, n) === Replaces switchprog S pm:n, provided it is a non-empty substring of S p. === check() === Verifies whether the goal of the proof search has been reached. A target theorem states that given the current axiomatized utility function u (Item 1f), the utility of a switch from p to the current switchprog would be higher than the utility of continuing the execution of p (which would keep searching for alternative switchprogs). === state2theorem(m, n) === Takes in two arguments, m and n, and attempts to convert the contents of Sm:n into a theorem. == Example applications == === Time-limited NP-hard optimization === The initial input to the Gödel machine is the representation of a connected graph with a large number of nodes linked by edges of various lengths. Within given time T it should find a cyclic path connecting all nodes. The only real-valued reward will occur at time T. It equals 1 divided by the length of the best path found so far (0 if none was found). There are no other inputs. The by-product of maximizing expected reward is to find the shortest path findable within the limited time, given the initial bias. === Fast theorem proving === Prove or disprove as quickly as possible that all even integers > 2 are the sum of two primes (Goldbach’s conjecture). The reward is 1/t, where t is the time required to produce and verify the first such proof. === Maximizing expected reward with bounded resources === A cognitive robot that needs at least 1 liter of gasoline per hour interacts with a partially unknown environment, trying to find hidden, limited gasoline depots to occasionally refuel its tank. It is rewarded in proportion to its lifetime, and dies after at most 100 years or as soon as its tank is empty or it falls off a cliff, and so on. The probabilistic environmental reactions are initially unknown but assumed to be sampled from the axiomatized Speed Prior, according to which hard-to-compute environmental reactions are unlikely. This permits a computable strategy for making near-optimal predictions. One by-product of maximizing expected reward is to maximize expected lifetime.

  Read more →
• 

  Data preprocessing

  Data preprocessing can refer to manipulation, filtration or augmentation of data before it is analyzed, and is often an important step in the data mining process. Data collection methods are often loosely controlled, resulting in out-of-range values, impossible data combinations, and missing values, amongst other issues. Preprocessing is the process by which unstructured data is transformed into intelligible representations suitable for machine-learning models. This phase of model deals with noise in order to arrive at better and improved results from the original data set which was noisy. This dataset also has some level of missing value present in it. The preprocessing pipeline used can often have large effects on the conclusions drawn from the downstream analysis. Thus, representation and quality of data is necessary before running any analysis. If there is a high proportion of irrelevant and redundant information present or noisy and unreliable data, then knowledge discovery during the training phase may be more difficult. Data preparation and filtering steps can take a considerable amount of processing time. Examples of methods used in data preprocessing include cleaning, instance selection, normalization, one-hot encoding, data transformation, feature extraction and feature selection. == Applications == === Data mining === Data preprocessing allows for the removal of unwanted data with the use of data cleaning, this allows the user to have a dataset to contain more valuable information after the preprocessing stage for data manipulation later in the data mining process. Editing such dataset to either correct data corruption or human error is a crucial step to get accurate quantifiers like true positives, true negatives, false positives and false negatives found in a confusion matrix that are commonly used for a medical diagnosis. Users are able to join data files together and use preprocessing to filter any unnecessary noise from the data which can allow for higher accuracy. Users use Python programming scripts accompanied by the pandas library which gives them the ability to import data from a comma-separated values as a data-frame. The data-frame is then used to manipulate data that can be challenging otherwise to do in Excel. Pandas (software) which is a powerful tool that allows for data analysis and manipulation; which makes data visualizations, statistical operations and much more, a lot easier. Many also use the R programming language to do such tasks as well. The reason why a user transforms existing files into a new one is because of many reasons. Aspects of data preprocessing may include imputing missing values, aggregating numerical quantities and transforming continuous data into categories (data binning). More advanced techniques like principal component analysis and feature selection are working with statistical formulas and are applied to complex datasets which are recorded by GPS trackers and motion capture devices. === Semantic data preprocessing === Semantic data mining is a subset of data mining that specifically seeks to incorporate domain knowledge, such as formal semantics, into the data mining process. Domain knowledge is the knowledge of the environment the data was processed in. Domain knowledge can have a positive influence on many aspects of data mining, such as filtering out redundant or inconsistent data during the preprocessing phase. Domain knowledge also works as constraint. It does this by using working as set of prior knowledge to reduce the space required for searching and acting as a guide to the data. Simply put, semantic preprocessing seeks to filter data using the original environment of said data more correctly and efficiently. There are increasingly complex problems which are asking to be solved by more elaborate techniques to better analyze existing information. Instead of creating a simple script for aggregating different numerical values into a single value, it make sense to focus on semantic based data preprocessing. The idea is to build a dedicated ontology, which explains on a higher level what the problem is about. In regards to semantic data mining and semantic pre-processing, ontologies are a way to conceptualize and formally define semantic knowledge and data. The Protégé (software) is the standard tool for constructing an ontology. In general, the use of ontologies bridges the gaps between data, applications, algorithms, and results that occur from semantic mismatches. As a result, semantic data mining combined with ontology has many applications where semantic ambiguity can impact the usefulness and efficiency of data systems. Applications include the medical field, language processing, banking, and even tutoring, among many more. There are various strengths to using a semantic data mining and ontological based approach. As previously mentioned, these tools can help during the per-processing phase by filtering out non-desirable data from the data set. Additionally, well-structured formal semantics integrated into well designed ontologies can return powerful data that can be easily read and processed by machines. A specifically useful example of this exists in the medical use of semantic data processing. As an example, a patient is having a medical emergency and is being rushed to hospital. The emergency responders are trying to figure out the best medicine to administer to help the patient. Under normal data processing, scouring all the patient’s medical data to ensure they are getting the best treatment could take too long and risk the patients’ health or even life. However, using semantically processed ontologies, the first responders could save the patient’s life. Tools like a semantic reasoner can use ontology to infer the what best medicine to administer to the patient is based on their medical history, such as if they have a certain cancer or other conditions, simply by examining the natural language used in the patient's medical records. This would allow the first responders to quickly and efficiently search for medicine without having worry about the patient’s medical history themselves, as the semantic reasoner would already have analyzed this data and found solutions. In general, this illustrates the incredible strength of using semantic data mining and ontologies. They allow for quicker and more efficient data extraction on the user side, as the user has fewer variables to account for, since the semantically pre-processed data and ontology built for the data have already accounted for many of these variables. However, there are some drawbacks to this approach. Namely, it requires a high amount of computational power and complexity, even with relatively small data sets. This could result in higher costs and increased difficulties in building and maintaining semantic data processing systems. This can be mitigated somewhat if the data set is already well organized and formatted, but even then, the complexity is still higher when compared to standard data processing. Below is a simple a diagram combining some of the processes, in particular semantic data mining and their use in ontology. The diagram depicts a data set being broken up into two parts: the characteristics of its domain, or domain knowledge, and then the actual acquired data. The domain characteristics are then processed to become user understood domain knowledge that can be applied to the data. Meanwhile, the data set is processed and stored so that the domain knowledge can applied to it, so that the process may continue. This application forms the ontology. From there, the ontology can be used to analyze data and process results. Fuzzy preprocessing is another, more advanced technique for solving complex problems. Fuzzy preprocessing and fuzzy data mining make use of fuzzy sets. These data sets are composed of two elements: a set and a membership function for the set which comprises 0 and 1. Fuzzy preprocessing uses this fuzzy data set to ground numerical values with linguistic information. Raw data is then transformed into natural language. Ultimately, fuzzy data mining's goal is to help deal with inexact information, such as an incomplete database. Currently fuzzy preprocessing, as well as other fuzzy based data mining techniques see frequent use with neural networks and artificial intelligence.

  Read more →
• 

  Transportation Economic Development Impact System

  Transportation Economic Development Impact System (TREDIS) is an economic analysis system sold by consulting firm Economic Development Research Group that is used in planning major transportation investments in the US and Canada. The role of economic impact analysis and TREDIS in the transportation planning process is explained in guidebooks of the US Department of Transportation and the American Association of State Highway and Transportation Officials. TREDIS has been most commonly used for assessing the expected economic impacts of statewide highway programs, regional multi-modal plans and public transport investment. Its history and theoretical foundation are explained in peer reviewed journal articles. == How It Works == TREDIS has a series of modules that calculate different forms of impacts and benefits. One module is an accounting framework that calculates user benefits, including impacts on cargo transportation and commuting costs, based on transportation forecasting results. A second module calculates wider economic development benefits, including impacts on business productivity, economic development and multiplier effects from the input-output analysis. It applies an economic model to estimate impacts on jobs, income, gross regional product and business output, by sector of the economy. A third module applies cost-benefit analysis from alternative perspectives.

  Read more →
• 

  Inauthentic text

  An inauthentic text is a computer-generated expository document meant to appear as genuine, but which is actually meaningless. Frequently they are created in order to be intermixed with genuine documents and thus manipulate the results of search engines, as with Spam blogs. They are also carried along in email in order to fool spam filters by giving the spam the superficial characteristics of legitimate text. Sometimes nonsensical documents are created with computer assistance for humorous effect, as with Dissociated press or Flarf poetry. They have also been used to challenge the veracity of a publication—MIT students submitted papers generated by a computer program called SCIgen to a conference, where they were initially accepted. This led the students to claim that the bar for submissions was too low. With the amount of computer generated text outpacing the ability of people to humans to curate it, there needs some means of distinguishing between the two. Yet automated approaches to determining absolutely whether a text is authentic or not face intrinsic challenges of semantics. Noam Chomsky coined the phrase "Colorless green ideas sleep furiously" giving an example of grammatically correct, but semantically incoherent sentence; some will point out that in certain contexts one could give this sentence (or any phrase) meaning. The first group to use the expression in this regard can be found below from Indiana University. Their work explains in detail an attempt to detect inauthentic texts and identify pernicious problems of inauthentic texts in cyberspace. The site has a means of submitting text that assesses, based on supervised learning, whether a corpus is inauthentic or not. Many users have submitted incorrect types of data and have correspondingly commented on the scores. This application is meant for a specific kind of data; therefore, submitting, say, an email, will not return a meaningful score.

  Read more →
• 

  Wumpus world

  Wumpus world is a simple world use in artificial intelligence for which to represent knowledge and to reason. Wumpus world was introduced by Michael Genesereth, and is discussed in the Russell-Norvig Artificial Intelligence book Artificial Intelligence: A Modern Approach. Wumpus World is loosely inspired by the 1972 video game Hunt the Wumpus. == Problem description == In Artificial Intelligence: A Modern Approach, the wumpus world features a 4x4 grid, containing a monster called a wumpus, multiple bottomless pits and hidden gold. The agent starts at (1,1) and has to find the gold and return to the starting position. The agent loses 1 point for every move and gains 1000 points for bringing the gold to the starting position. The agent can sense pits by a breeze, stench indicates a wumpus, and sparkle indicates gold. The wumpus can be killed by an arrow but costs 10 points.

  Read more →