AI Generator Letter

AI Generator Letter — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Auto-defrost

  Auto-defrost, automatic defrost or self-defrosting is a technique which regularly defrosts the evaporator in a refrigerator or freezer. Appliances using this technique are often called frost free, frostless, or no-frost. == Mechanism == The defrost mechanism in a refrigerator heats the cooling element (evaporator coil) for a short period of time and melts the frost that has formed on it. The resulting water drains through a duct at the back of the unit. Defrosting is controlled by an electric or electronic timer. For every 6, 8, 10, 12 or 24 hours of compressor operation, it turns on a defrost heater for 15 minutes to half an hour. The defrost heater, having a typical power rating of 350W to 600W, is often mounted just below the evaporator in top and bottom-freezer models. It can also be located below and in the middle of the evaporator in side-by-side models. It may be protected from short circuits by means of fusible links. In older refrigerators, the timer runs continuously. In newer designs, the timer only runs while the compressor runs, so the longer the refrigerator door is closed, the less time the heater will run for and the more energy is saved. A defrost thermostat opens the heater circuit when the evaporator temperature rises above a preset temperature, 40°F (5°C) or more, thereby preventing excessive heating of the freezer compartment. The defrost timer is such that either the compressor or the defrost heater is on, but not both at the same time. Inside the freezer, air is circulated by means of one or more fans. In a typical design cold air from the freezer compartment is ducted to the fresh food compartment and circulated back into the freezer compartment. Air circulation helps sublimate any ice or frost that may form on frozen items in the freezer compartment. While defrosting, this fan is stopped to prevent heated-up air from reaching the food compartment. Instead of the normal cooling elements being embedded in the freezer liner, auto-defrost elements are behind or beneath the liner. This allows them to be heated for short periods of time to dispose of frost, without heating the contents of the freezer. Alternatively, some systems use the hot gas in the condenser to defrost the evaporator. This is done by means of a circuit that is cross-linked by a three-way valve. The hot gas quickly heats up the evaporator and defrosts it. This system is primarily used in commercial applications such as ice-cream displays. == Application == While this technique was originally applied to the refrigerator compartment, it was later used for freezer compartment as well. A combined refrigerator/freezer which applies self-defrosting to the refrigerator compartment only is usually called "partial frost free" or semi-automatic defrost (some brands call these "Auto Defrost" while Frigidaire referred to their semi-automatic models as "Cycla-Matic," Kelvinator often named these models as "Cyclic Defrost" ). These refrigerators usually have a pan underneath where water from the melted frost in the refrigerator section evaporates. Freezers with automatic defrosting and combined refrigerator/freezer units which also apply self defrosting to their freezer compartment are called "frost free". The latter usually feature an air connection between the two compartments with the air passage to the refrigerator compartment regulated by a damper. By this means, a controlled portion of the air coming from the freezer reaches the refrigerator. Some older models have no air circulation between their freezer and refrigerator sections. Instead, they use an independent cooling system (for example: an evaporator coil with a defrost heater and a circulating fan in the freezer and a cold-plate or open-coil evaporator in the refrigerator. "Frost-Free" refrigerator/freezer units usually use a heating element to defrost their evaporators, a pan to collect and evaporate water from the frost that melts from the cold plate and/or evaporator coil, a timer which turns off the compressor and turns on the defrost element usually from once to 4 times a day for periods usually ranging from 15 to 30 minutes, a defrost limiter thermostat that turns off the heating element before the temperature rises too much while the timer is still in its defrost phase. Some models also feature a drain heater to prevent ice from blocking the drain. Other early types of refrigerators also use hot gas defrost instead of electric heaters. These reverse the evaporator and condenser sides for the defrost cycle. Some newer refrigerator/freezer models have a computer that monitors how many times each door is opened and uses this data to control defrost scheduling thereby reducing power use. == Advantages == No need to manually defrost the frost buildup, therefore power consumption will not increase with time. Food packaging is easier to see. Most frozen food will not stick together. Smells are limited, especially in total frost-free appliances because the air always circulates. Better temperature management. == Disadvantages == The system can be more expensive to run when usage is high and if the fan continues or starts to run when the door is opened. A thermal cutout safety device is required to prevent overheating of the heating element. Increased electrical and mechanical complexity compared to a basic upright freezer or chest freezer, making it more prone to component failure. The temperature of the freezer contents rises during the defrosting cycles, especially if there is a light load in the freezer. This can cause "freezer burn" on articles placed in the freezer, from partially defrosting, then re-freezing On hot, humid days condensation will sometimes form around the refrigerator doors. Defrosting may not be completed by the time the defrost timer cycles back to normal operation (especially in hot, humid conditions with frequent door openings), leaving ice/frost on the evaporator coils. This condition can lead to "icing" which will interfere with the operation of the refrigerator. In laboratories, self-defrosting freezers must not be used to store certain delicate reagents such as enzymes, because the temperature cycling can degrade them. In addition, water can evaporate out of containers that do not have a very tight seal, altering the concentration of the reagents. Self-defrosting freezers should never be used to store flammable chemicals.

  Read more →
• 

  Patent visualisation

  Patent visualisation is an application of information visualisation. The number of patents has been increasing, encouraging companies to consider intellectual property as a part of their strategy. Patent visualisation, like patent mapping, is used to quickly view a patent portfolio. Software dedicated to patent visualisation began to appear in 2000, for example Aureka from Aurigin (now owned by Thomson Reuters). Many patent and portfolio analytics platforms, such as Questel, Patent Forecast, PatSnap, Patentcloud, Relecura, and Patent iNSIGHT Pro, offer options to visualise specific data within patent documents by creating topic maps, priority maps, IP Landscape reports, etc. Software converts patents into infographics or maps, to allow the analyst to "get insight into the data" and draw conclusions. Also called patinformatics, it is the "science of analysing patent information to discover relationships and trends that would be difficult to see when working with patent documents on a one-and-one basis". Patents contain structured data (like publication numbers) and unstructured text (like title, abstract, claims and visual info). Structured data are processed by data-mining and unstructured data are processed with text-mining. == Data mining == The main step in processing structured information is data-mining, which emerged in the late 1980s. Data mining involves statistics, artificial intelligence, and machine learning. Patent data mining extracts information from the structured data of the patent document. These structured data are bibliographic fields such as location, date or status. === Structured fields === === Advantages === Data mining allows study of filing patterns of competitors and locates main patent filers within a specific area of technology. This approach can be helpful to monitor competitors' environments, moves and innovation trends and gives a macro view of a technology status. == Text-mining == === Principle === Text mining is used to search through unstructured text documents. This technique is widely used on the Internet, it has had success in bioinformatics and now in the intellectual property environment. Text mining is based on a statistical analysis of word recurrence in a corpus. An algorithm extracts words and expressions from title, summary and claims and gathers them by declension. "And" and "if" are labeled as non-information bearing words and are stored in the stopword list. Stoplists can be specialised in order to create an accurate analysis. Next, the algorithm ranks the words by weight, according to their frequency in the patent's corpus and the document frequency containing this word. The score for each word is calculated using a formula such as: W e i g h t = T e r m F r e q u e n c y D o c u m e n t F r e q u e n c y = F r e q u e n c y o f t h e w o r d o r e x p r e s s i o n i n t h e T e x t S e a N u m b e r o f d o c u m e n t s c o n t a i n i n g t h e e x p r e s s i o n o r w o r d {\displaystyle Weight={\frac {Term\ Frequency}{Document\ Frequency}}={\frac {Frequency\ of\ the\ word\ or\ expression\ in\ the\ Text\ Sea}{Number\ of\ documents\ containing\ the\ expression\ or\ word}}} A frequently used word in several documents has less weight than a word used frequently in a few patents. Words under a minimum weight are eliminated, leaving a list of pertinent words or descriptors. Each patent is associated to the descriptors found in the selected document. Further, in the process of clusterisation, these descriptors are used as subsets, in which the patent are regrouped or as tags to place the patents in predetermined categories, for example keywords from International Patent Classifications. Four text parts can be processed with text-mining : Title Abstract Claim Patent Full-Text Software offer different combinations but title, abstract and claim are generally the most used, providing a good balance between interferences and relevancy. === Advantages === Text-mining can be used to narrow a search or quickly evaluate a patent corpus. For instance, if a query produces irrelevant documents, a multi-level clustering hierarchy identifies them in order to delete them and refine the search. Text-mining can also be used to create internal taxonomies specific to a corpus for possible mapping. == Visualisations == Allying patent analysis and informatic tools offers an overview of the environment through value-added visualisations. As patents contain structured and unstructured information, visualisations fall in two categories. Structured data can be rendered with data mining in macrothematic maps and statistical analysis. Unstructured information can be shown in like clouds, cluster maps and 2D keyword maps. === Data mining visualisation === === Text mining visualisation === === Visualisation for both data-mining and text-mining === Mapping visualisations can be used for both text-mining and data-mining results. == Uses == What patent visualisation can highlight: Competitors Partners New innovations Technologic environment description Networks Field application: R&D strategy management Competitive intelligence Licensing Strategy

  Read more →
• 

  Tessellation (computer graphics)

  In computer graphics, tessellation is the dividing of datasets of polygons (sometimes called vertex sets) presenting objects in a scene into suitable structures for rendering. Especially for real-time rendering, data is tessellated into triangles, for example in OpenGL 4.0 and Direct3D 11. == In graphics rendering == A key advantage of tessellation for realtime graphics is that it allows detail to be dynamically added and subtracted from a 3D polygon mesh and its silhouette edges based on control parameters (often camera distance). In previously leading realtime techniques such as parallax mapping and bump mapping, surface details could be simulated at the pixel level, but silhouette edge detail was fundamentally limited by the quality of the original dataset. In Direct3D 11 pipeline (a part of DirectX 11), the graphics primitive is the patch. The tessellator generates a triangle-based tessellation of the patch according to tessellation parameters such as the TessFactor, which controls the degree of fineness of the mesh. The tessellation, along with shaders such as a Phong shader, allows for producing smoother surfaces than would be generated by the original mesh. By offloading the tessellation process onto the GPU hardware, smoothing can be performed in real time. Tessellation can also be used for implementing subdivision surfaces, level of detail scaling and fine displacement mapping. OpenGL 4.0 uses a similar pipeline, where tessellation into triangles is controlled by the Tessellation Control Shader and a set of four tessellation parameters. == In computer-aided design == In computer-aided design the constructed design is represented by a boundary representation topological model, where analytical 3D surfaces and curves, limited to faces, edges, and vertices, constitute a continuous boundary of a 3D body. Arbitrary 3D bodies are often too complicated to analyze directly. So they are approximated (tessellated) with a mesh of small, easy-to-analyze pieces of 3D volume—usually either irregular tetrahedra, or irregular hexahedra. The mesh is used for finite element analysis. The mesh of a surface is usually generated per individual faces and edges (approximated to polylines) so that original limit vertices are included into mesh. To ensure that approximation of the original surface suits the needs of further processing, three basic parameters are usually defined for the surface mesh generator: The maximum allowed distance between the planar approximation polygon and the surface (known as "sag"). This parameter ensures that mesh is similar enough to the original analytical surface (or the polyline is similar to the original curve). The maximum allowed size of the approximation polygon (for triangulations it can be maximum allowed length of triangle sides). This parameter ensures enough detail for further analysis. The maximum allowed angle between two adjacent approximation polygons (on the same face). This parameter ensures that even very small humps or hollows that can have significant effect to analysis will not disappear in mesh. An algorithm generating a mesh is typically controlled by the above three and other parameters. Some types of computer analysis of a constructed design require an adaptive mesh refinement, which is a mesh made finer (using stronger parameters) in regions where the analysis needs more detail.

  Read more →
• 

  Reflection (computer graphics)

  Reflection in computer graphics is used to render reflective objects like mirrors and shiny surfaces. Accurate reflections are commonly computed using ray tracing whereas approximate reflections can usually be computed faster by using simpler methods such as environment mapping. Reflections on shiny surfaces like wood or tile can add to the photorealistic effects of a 3D rendering. == Approaches to reflection rendering == For rendering environment reflections there exist many techniques that differ in precision, computational and implementation complexity. Combination of these techniques are also possible. Image order rendering algorithms based on tracing rays of light, such as ray tracing or path tracing, typically compute accurate reflections on general surfaces, including multiple reflections and self reflections. However these algorithms are generally still too computationally expensive for real time rendering (even though specialized HW exists, such as Nvidia RTX) and require a different rendering approach from typically used rasterization. Reflections on planar surfaces, such as planar mirrors or water surfaces, can be computed simply and accurately in real time with two pass rendering — one for the viewer, one for the view in the mirror, usually with the help of stencil buffer. Some older video games used a trick to achieve this effect with one pass rendering by putting the whole mirrored scene behind a transparent plane representing the mirror. Reflections on non-planar (curved) surfaces are more challenging for real time rendering. Main approaches that are used include: Environment mapping (e.g. cube mapping): a technique that has been widely used e.g. in video games, offering reflection approximation that's mostly sufficient to the eye, but lacking self-reflections and requiring pre-rendering of the environment map. The precision can be increased by using a spatial array of environment maps instead of just one. It is also possible to generate cube map reflections in real time, at the cost of memory and computational requirements. Screen space reflections (SSR): a more expensive technique that traces rays come from pixel data.This requires the data of surface normal and either depth buffer (local space) or position buffer (world space).The disadvantage is that objects not captured in the rendered frame cannot appear in the reflections, which results in unresolved and or false intersections causing artefacts such as reflection vanishment and virtual image. SSR was originally introduced as Real Time Local Reflections in CryENGINE 3. == Types of reflection == Polished - A polished reflection is an undisturbed reflection, like a mirror or chrome surface. Blurry - A blurry reflection means that tiny random bumps, or microfacets, on the surface of the material causes the reflection to be blurry. Metallic - A reflection is metallic if the highlights and reflections retain the color of the reflective object. Glossy - This term can be misused: sometimes, it is a setting which is the opposite of blurry (e.g. when "glossiness" has a low value, the reflection is blurry). Sometimes the term is used as a synonym for "blurred reflection". Glossy used in this context means that the reflection is actually blurred. === Polished or mirror reflection === Mirrors are usually almost 100% reflective. === Metallic reflection === Normal (nonmetallic) objects reflect light and colors in the original color of the object being reflected. Metallic objects reflect lights and colors altered by the color of the metallic object itself. === Blurry reflection === Many materials are imperfect reflectors, where the reflections are blurred to various degrees due to surface roughness that scatters the rays of the reflections. === Glossy reflection === Fully glossy reflection, shows highlights from light sources, but does not show a clear reflection from objects. == Examples of reflections == === Wet floor reflections === The wet floor effect is a graphic effects technique popular in conjunction with Web 2.0 style pages, particularly in logos. The effect can be done manually or created with an auxiliary tool which can be installed to create the effect automatically. Unlike a standard computer reflection (and the Java water effect popular in first-generation web graphics), the wet floor effect involves a gradient and often a slant in the reflection, so that the mirrored image appears to be hovering over or resting on a wet floor.

  Read more →
• 

  Electronic business

  Electronic business (also known as online business or e-business) is any kind of business or commercial activity that includes sharing information across the internet. Commerce constitutes the exchange of products and services between businesses, groups, and individuals; and can be seen as one of the essential activities of any business. E-commerce focuses on the use of ICT to enable the external activities and relationships of the business with individuals, groups, and other organizations, while e-business does not only deal with online commercial operations of enterprises, but also deals with their other organizational matters such as human resource management and production. The term "e-business" was coined by IBM's marketing and Internet team in 1996. == Market participants == Electronic business can take place between a very large number of market participants; it can be between business and consumer, private individuals, public administrations, or any other organizations such as non-governmental organizations (NGOs). These various market participants can be divided into three main groups: Business (B) Consumer (C) Administration (A) All of them can be either buyers or service providers within the market. There are nine possible combinations for electronic business relationships. B2C and B2B belong to E-commerce, while A2B and A2A belong to the E-government sector which is also a part of the electronic business. == History == One of the founding pillars of electronic business was the development of the Electronic Data Interchange (EDI) electronic data interchange. This system replaced traditional mailing and faxing of documents with a digital transfer of data from one computer to another, without any human intervention. Michael Aldrich is considered the developer of the predecessor to online shopping. In 1979, the entrepreneur connected a television set to a transaction processing computer with a telephone line and called it "teleshopping", meaning shopping at distance. From the mid-nineties, major advancements were made in the commercial use of the Internet. Amazon, which launched in 1995, started as an online bookstore and grew to become nowadays the largest online retailer worldwide, selling food, toys, electronics, apparel and more. Other successful stories of online marketplaces include eBay or Etsy. In 1994, IBM, with its agency Ogilvy & Mather, began to use its foundation in IT solutions and expertise to market itself as a leader of conducting business on the Internet through the term "e-business." Then CEO Louis V. Gerstner, Jr. was prepared to invest $1 billion to market this new brand. After conducting worldwide market research in October 1997, IBM began with an eight-page piece in The Wall Street Journal that would introduce the concept of "e-business" and advertise IBM's expertise in the new field. IBM decided not to trademark the term "e-business" in the hopes that other companies would use the term and create an entirely new industry. However, this proved to be too successful and by 2000, to differentiate itself, IBM launched a $300 million campaign about its "e-business infrastructure" capabilities. Since that time, the terms, "e-business" and "e-commerce" have been loosely interchangeable and have become a part of the common vernacular. According to the U.S. Department Of Commerce, the estimated retail e-commerce sales in Q1 2020 were representing almost 12% of total U.S. retail sales, against 4% for Q1 2010. == Business model == The transformation toward e-business is complex and in order for it to succeed, there is a need to balance between strategy, an adapted business model (e-intermediary, marketplaces), right processes (sales, marketing) and technology (Supply Chain Management, Customer Relationship Management). When organizations go online, they have to decide which e-business models best suit their goals. A business model is defined as the organization of product, service and information flows, and the source of revenues and benefits for suppliers and customers. The concept of the e-business model is the same but used in online presence. === Revenue model === A key component of the business model is the revenue model or profit model, which is a framework for generating revenues. It identifies which revenue source to pursue, what value to offer, how to price the value, and who pays for the value. It is a key component of a company's business model. It primarily identifies what product or service will be created in order to generate revenues and the ways in which the product or service will be sold. Without a well-defined revenue model, that is, a clear plan of how to generate revenues, new businesses will more likely struggle due to costs that they will not be able to sustain. By having a revenue model, a business can focus on a target audience, fund development plans for a product or service, establish marketing plans, begin a line of credit and raise capital. ==== E-commerce ==== E-commerce (short for "electronic commerce") is trading in products or services using computer networks, such as the Internet. Electronic commerce draws on technologies such as mobile commerce, electronic funds transfer, supply chain management, Internet marketing, online transaction processing, electronic data interchange (EDI), inventory management systems, and automated data collection. Modern electronic commerce typically uses the World Wide Web for at least one part of the transaction's life cycle, although it may also use other technologies such as e-mail. == Concerns == While much has been written of the economic advantages of Internet-enabled commerce, there is also evidence that some aspects of the internet such as maps and location-aware services may serve to reinforce economic inequality and the digital divide. Electronic commerce may be responsible for consolidation and the decline of mom-and-pop, brick and mortar businesses resulting in increases in income inequality. === Security === E-business systems naturally have greater security risks than traditional business systems, therefore it is important for e-business systems to be fully protected against these risks. A far greater number of people have access to e-businesses through the internet than would have access to a traditional business. Customers, suppliers, employees, and numerous other people use any particular e-business system daily and expect their confidential information to stay secure. Hackers are one of the great threats to the security of e-businesses. Some common security concerns for e-Businesses include keeping business and customer information private and confidential, the authenticity of data, and data integrity. Some of the methods of protecting e-business security and keeping information secure include physical security measures as well as data storage, data transmission, anti-virus software, firewalls, and encryption to list a few. ==== Privacy and confidentiality ==== Confidentiality is the extent to which businesses makes personal information available to other businesses and individuals. With any business, confidential information must remain secure and only be accessible to the intended recipient. However, this becomes even more difficult when dealing with e-businesses specifically. To keep such information secure means protecting any electronic records and files from unauthorized access, as well as ensuring safe transmission and data storage of such information. Tools such as encryption and firewalls manage this specific concern within e-business. ==== Authenticity ==== E-business transactions pose greater challenges for establishing authenticity due to the ease with which electronic information may be altered and copied. Both parties in an e-business transaction want to have the assurance that the other party is who they claim to be, especially when a customer places an order and then submits a payment electronically. One common way to ensure this is to limit access to a network or trusted parties by using a virtual private network (VPN) technology. The establishment of authenticity is even greater when a combination of techniques are used, and such techniques involve checking "something you know" (i.e. password or PIN), "something you need" (i.e. credit card), or "something you are" (i.e. digital signatures or voice recognition methods). Many times in e-business, however, "something you are" is pretty strongly verified by checking the purchaser's "something you have" (i.e. credit card) and "something you know" (i.e. card number). ==== Data integrity ==== Data integrity answers the question "Can the information be changed or corrupted in any way?" This leads to the assurance that the message received is identical to the message sent. A business needs to be confident that data is not changed in transit, whether deliberately or by accident. To help with data integrity, firewalls protect stored data against unauthorized access, while

  Read more →
• 

  Geometric primitive

  In vector computer graphics, CAD systems, and geographic information systems, a geometric primitive (or prim) is the simplest (i.e. 'atomic' or irreducible) geometric shape that the system can handle (draw, store). Sometimes the subroutines that draw the corresponding objects are called "geometric primitives" as well. The most "primitive" primitives are point and straight line segments, which were all that early vector graphics systems had. In constructive solid geometry, primitives are simple geometric shapes such as a cube, cylinder, sphere, cone, pyramid, torus. Modern 2D computer graphics systems may operate with primitives which are curves (segments of straight lines, circles and more complicated curves), as well as shapes (boxes, arbitrary polygons, circles). A common set of two-dimensional primitives includes lines, points, and polygons, although some people prefer to consider triangles primitives, because every polygon can be constructed from triangles (polygon triangulation). All other graphic elements are built up from these primitives. In three dimensions, triangles or polygons positioned in three-dimensional space can be used as primitives to model more complex 3D forms. In some cases, curves (such as Bézier curves, circles, etc.) may be considered primitives; in other cases, curves are complex forms created from many straight, primitive shapes. == Common primitives == The set of geometric primitives is based on the dimension of the region being represented: Point (0-dimensional), a single location with no height, width, or depth. Line or curve (1-dimensional), having length but no width, although a linear feature may curve through a higher-dimensional space. Planar surface or curved surface (2-dimensional), having length and width. Volumetric region or solid (3-dimensional), having length, width, and depth. In GIS, the terrain surface is often spoken of colloquially as "2 1/2 dimensional," because only the upper surface needs to be represented. Thus, elevation can be conceptualized as a scalar field property or function of two-dimensional space, affording it a number of data modeling efficiencies over true 3-dimensional objects. A shape of any of these dimensions greater than zero consists of an infinite number of distinct points. Because digital systems are finite, only a sample set of the points in a shape can be stored. Thus, vector data structures typically represent geometric primitives using a strategic sample, organized in structures that facilitate the software interpolating the remainder of the shape at the time of analysis or display, using the algorithms of Computational geometry. A Point is a single coordinate in a Cartesian coordinate system. Some data models allow for Multipoint features consisting of several disconnected points. A Polygonal chain or Polyline is an ordered list of points (termed vertices in this context). The software is expected to interpolate the intervening shape of the line between adjacent points in the list as a parametric curve, most commonly a straight line, but other types of curves are frequently available, including circular arcs, cubic splines, and Bézier curves. Some of these curves require additional points to be defined that are not on the line itself, but are used for parametric control. A Polygon is a polyline that closes at its endpoints, representing the boundary of a two-dimensional region. The software is expected to use this boundary to partition 2-dimensional space into an interior and exterior. Some data models allow for a single feature to consist of multiple polylines, which could collectively connect to form a single closed boundary, could represent a set of disjoint regions (e.g., the state of Hawaii), or could represent a region with holes (e.g., a lake with an island). A Parametric shape is a standardized two-dimensional or three-dimensional shape defined by a minimal set of parameters, such as an ellipse defined by two points at its foci, or three points at its center, vertex, and co-vertex. A Polyhedron or Polygon mesh is a set of polygon faces in three-dimensional space that are connected at their edges to completely enclose a volumetric region. In some applications, closure may not be required or may be implied, such as modeling terrain. The software is expected to use this surface to partition 3-dimensional space into an interior and exterior. A triangle mesh is a subtype of polyhedron in which all faces must be triangles, the only polygon that will always be planar, including the Triangulated irregular network (TIN) commonly used in GIS. A parametric mesh represents a three-dimensional surface by a connected set of parametric functions, similar to a spline or Bézier curve in two dimensions. The most common structure is the Non-uniform rational B-spline (NURBS), supported by most CAD and animation software. == Application in GIS == A wide variety of vector data structures and formats have been developed during the history of Geographic information systems, but they share a fundamental basis of storing a core set of geometric primitives to represent the location and extent of geographic phenomena. Locations of points are almost always measured within a standard Earth-based coordinate system, whether the spherical Geographic coordinate system (latitude/longitude), or a planar coordinate system, such as the Universal Transverse Mercator. They also share the need to store a set of attributes of each geographic feature alongside its shape; traditionally, this has been accomplished using the data models, data formats, and even software of relational databases. Early vector formats, such as POLYVRT, the ARC/INFO Coverage, and the Esri shapefile support a basic set of geometric primitives: points, polylines, and polygons, only in two dimensional space and the latter two with only straight line interpolation. TIN data structures for representing terrain surfaces as triangle meshes were also added. Since the mid 1990s, new formats have been developed that extend the range of available primitives, generally standardized by the Open Geospatial Consortium's Simple Features specification. Common geometric primitive extensions include: three-dimensional coordinates for points, lines, and polygons; a fourth "dimension" to represent a measured attribute or time; curved segments in lines and polygons; text annotation as a form of geometry; and polygon meshes for three-dimensional objects. Frequently, a representation of the shape of a real-world phenomenon may have a different (usually lower) dimension than the phenomenon being represented. For example, a city (a two-dimensional region) may be represented as a point, or a road (a three-dimensional volume of material) may be represented as a line. This dimensional generalization correlates with tendencies in spatial cognition. For example, asking the distance between two cities presumes a conceptual model of the cities as points, while giving directions involving travel "up," "down," or "along" a road imply a one-dimensional conceptual model. This is frequently done for purposes of data efficiency, visual simplicity, or cognitive efficiency, and is acceptable if the distinction between the representation and the represented is understood, but can cause confusion if information users assume that the digital shape is a perfect representation of reality (i.e., believing that roads really are lines). == In 3D modelling == In CAD software or 3D modelling, the interface may present the user with the ability to create primitives which may be further modified by edits. For example, in the practice of box modelling the user will start with a cuboid, then use extrusion and other operations to create the model. In this use the primitive is just a convenient starting point, rather than the fundamental unit of modelling. A 3D package may also include a list of extended primitives which are more complex shapes that come with the package. For example, a teapot is listed as a primitive in 3D Studio Max. == In graphics hardware == Various graphics accelerators exist with hardware acceleration for rendering specific primitives such as lines or triangles, frequently with texture mapping and shaders. Modern 3D accelerators typically accept sequences of triangles as triangle strips.

  Read more →
• 

  PDE surface

  PDE surfaces are used in geometric modelling and computer graphics for creating smooth surfaces conforming to a given boundary configuration. PDE surfaces use partial differential equations to generate a surface which usually satisfy a mathematical boundary value problem. PDE surfaces were first introduced into the area of geometric modelling and computer graphics by two British mathematicians, Malcolm Bloor and Michael Wilson. == Technical details == The PDE method involves generating a surface for some boundary by means of solving an elliptic partial differential equation of the form ( ∂ 2 ∂ u 2 + a 2 ∂ 2 ∂ v 2 ) 2 X ( u , v ) = 0. {\displaystyle \left({\frac {\partial ^{2}}{\partial u^{2}}}+a^{2}{\frac {\partial ^{2}}{\partial v^{2}}}\right)^{2}X(u,v)=0.} Here X ( u , v ) {\displaystyle X(u,v)} is a function parameterised by the two parameters u {\displaystyle u} and v {\displaystyle v} such that X ( u , v ) = ( x ( u , v ) , y ( u , v ) , z ( u , v ) ) {\displaystyle X(u,v)=(x(u,v),y(u,v),z(u,v))} where x {\displaystyle x} , y {\displaystyle y} and z {\displaystyle z} are the usual cartesian coordinate space. The boundary conditions on the function X ( u , v ) {\displaystyle X(u,v)} and its normal derivatives ∂ X / ∂ n {\displaystyle \partial {X}/\partial {n}} are imposed at the edges of the surface patch. With the above formulation it is notable that the elliptic partial differential operator in the above PDE represents a smoothing process in which the value of the function at any point on the surface is, in some sense, a weighted average of the surrounding values. In this way, a surface is obtained as a smooth transition between the chosen set of boundary conditions. The parameter a {\displaystyle a} is a special design parameter which controls the relative smoothing of the surface in the u {\displaystyle u} and v {\displaystyle v} directions. When a = 1 {\displaystyle a=1} , the PDE is the biharmonic equation: X u u u u + 2 X u u v v + X v v v v = 0 {\displaystyle X_{uuuu}+2X_{uuvv}+X_{vvvv}=0} . The biharmonic equation is the equation produced by applying the Euler-Lagrange equation to the simplified thin plate energy functional X u u 2 + 2 X u v 2 + X v v 2 {\displaystyle X_{uu}^{2}+2X_{uv}^{2}+X_{vv}^{2}} . So solving the PDE with a = 1 {\displaystyle a=1} is equivalent to minimizing the thin plate energy functional subject to the same boundary conditions. == Applications == PDE surfaces can be used in many application areas. These include computer-aided design, interactive design, parametric design, computer animation, computer-aided physical analysis and design optimisation. == Related publications == M.I.G. Bloor and M.J. Wilson, Generating Blend Surfaces using Partial Differential Equations, Computer Aided Design, 21(3), 165–171, (1989). H. Ugail, M.I.G. Bloor, and M.J. Wilson, Techniques for Interactive Design Using the PDE Method, ACM Transactions on Graphics, 18(2), 195–212, (1999). J. Huband, W. Li and R. Smith, An Explicit Representation of Bloor-Wilson PDE Surface Model by using Canonical Basis for Hermite Interpolation, Mathematical Engineering in Industry, 7(4), 421-33 (1999). H. Du and H. Qin, Direct Manipulation and Interactive Sculpting of PDE surfaces, Computer Graphics Forum, 19(3), C261-C270, (2000). H. Ugail, Spine Based Shape Parameterisations for PDE surfaces, Computing, 72, 195–204, (2004). L. You, P. Comninos, J.J. Zhang, PDE Blending Surfaces with C2 Continuity, Computers and Graphics, 28(6), 895–906, (2004).

  Read more →
• 

  Hi uTandem

  Hi uTandem, also known as uTandem, is a free language exchange mobile app. It helps people to connect with other language learners in order to carry out face-to-face language exchange sessions and also offers learners lists of businesses in the field of language learning or language exchange. == Use == Hi uTandem is built around the concept of language exchange, which is a method of language learning based on mutual oral linguistic exchange between partners. Ideally, each partner is a native speaker of the language they are helping their counterpart to learn. The app designed for users to chat with other users and translate messages, find suitable language partners and to locate language schools, bars, cafés and language exchange groups around them. == Team and development == Hi uTandem was released in January, 2016. The initial idea was conceived by Alberto Rodríguez as part of a team of eight Spanish youngsters. Hi uTandem belongs to the company Velvor Tech S.L., founded by the same members and registered in Ronda (Spain). == Reception == Hi uTandem was listed on the Top 4 Apps to Learn Languages list by ElPlural.com and since its launch it has been featured in numerous online and physical sources, including 20 minutos, Europapress, ABC Andalucía and Telefónica's Think Big Blog.

  Read more →
• 

  Scenery generator

  A scenery generator (or terrain generator) is a software used to create landscape images, 3D models, and animations. These programs often use procedural generation to generate the landscapes, or sometimes created and rendered by a 3D artist. These programs are often used in video games or movies. Basic elements of landscapes created by scenery generators include terrain, water, foliage, and clouds. The process for basic random generation uses a diamond square algorithm. == Common features == Most scenery generators can create basic heightmaps to simulate the variation of elevation in basic terrain. Common techniques include Simplex noise, fractals, or the diamond-square algorithm, which can generate 2-dimensional heightmaps. A version of scenery generator can be very simplistic. Using a diamond-square algorithm with some extra steps involving fractals, an algorithm for random generation of terrain can be made with only 120 lines of code. The program in example takes a grid and then divides the grid repeatedly. Each smaller grid is then split into squares and diamonds and the algorithm then makes the randomized terrain for each square and diamond. Most programs for creating landscapes also allow for adjustment and editing of the landscape. For example, World Creator allows for terrain sculpting, which uses a similar brush system as Photoshop, and allows for additional terrain enhancement with its procedural techniques such as erosion, sediments, and more. Other tools in the World Creator program include terrain stamping, which allows you to import elevation maps and use them as a base. The programs tend to also allow for additional placement of rocks, trees, etc. These can be done procedurally or by hand depending on the program. Typically the models used for the placement objects are the same as to lessen the amount of work that would be done if the user was to create a multitude of different trees. The terrain generated the computer does a generation of multifractals then integrates them until finally rendering them onto the screen. These techniques are typically done “on-the-fly” which typically for a 128 × 128 resolution terrain would mean 1.5 seconds on a CPU from the early 1990s. == Applications == Scenery generators are commonly used in movies, animations, 3D rendering, and video games. For example, Industrial Light & Magic used E-on Vue to create the fictional environments for Pirates of the Caribbean: Dead Man's Chest. In such live-action cases, a 3D model of the generated environment is rendered and blended with live-action footage. Scenery generated by the software may also be used to create completely computer-generated scenes. In the case of animated movies such as Kung Fu Panda, the raw generation is assisted by hand-painting to accentuate subtle details. Environmental elements not commonly associated with landscapes, such as ocean waves, have also been handled by the software. Scenery generation is used in most 3D based video-games. These typically use either custom or purchased engines that contain their own scenery generators. For some games they tend to use a procedurally generated terrain. These typically use a form of height mapping and use of Perlin noise. This will create a grid that with one point in a 2D coordinate will create the same heightmap as it is pseudorandom, meaning it will result in the same output with the same input. This can then easily be translated into the product 3D image. These can then be changed from the editor tools in most engines if the terrain will be custom built. With recent developments neural networks can be built to create or texture the terrain based on previously suggested artwork or heightmap data. These would be generated using algorithms that have been able to identify images and similarities between them. With the info the machine can take other heightmaps and render a very similar looking image to the style image. This can be used to create similar images in example a Studio Ghibli or Van Gogh art-style. == Software == Most game engines, whether custom or proprietary, will have terrain generation built in. Some terrain generator programs include, Terragen, which can create terrain, water, atmosphere and lighting; L3DT, which provides similar functions to Terragen, and has a 2048 × 2048 resolution limit; and World Creator, which can create terrain, and is fully GPU powered. === List of 3D terrain generation software ===

  Read more →
• 

  Multimedia database

  A Multimedia database (MMDB) is a collection of related for multimedia data. The multimedia data include one or more primary media data types such as text, images, graphic objects (including drawings, sketches and illustrations) animation sequences, audio and video. A Multimedia Database Management System (MMDBMS) is a framework that manages different types of data potentially represented in a wide diversity of formats on a wide array of media sources. It provides support for multimedia data types, and facilitate for creation, storage, access, query and control of a multimedia database. == Contents of MMDB == A Multimedia Database (MMDB) hosts one or more multimedia data types (i.e. text, images, graphic objects, audio, video, animation sequences). These data types are broadly categorized into three classes: Static media (time-independent: image and graphic object). Dynamic media (time-dependent: audio, video and animation). Dimensional media(3D game and computer aided drafting programs). === Comparison of multimedia data types === Additionally, a Multimedia Database (MMDB) needs to manage additional information pertaining to the actual multimedia data. The information is about the following: Media data: the actual data representing an object. Media format data: information about the format of the media data after it goes through the acquisition, processing, and encoding phases. Media keyword data: the keyword descriptions, usually relating to the generation of the media data. Media feature data: content dependent data such as contain information about the distribution of colours, the kinds of textures and the different shapes present in an image. The last three types are called metadata as they describe several different aspects of the media data. The media keyword data and media feature data are used as indices for searching purpose. The media format data is used to present the retrieved information. == Requirements of Multimedia databases == Like the traditional databases, Multimedia databases should address the following requirements: Integration Data items do not need to be duplicated for different programs invocations Data independence Separate the database and the management from the application programs Concurrency control Allows concurrent transactions Persistence Data objects can be saved and re-used by different transactions and program invocations Privacy Access and authorization control Integrity control Ensures database consistency between transactions Recovery Failures of transactions should not affect the persistent data storage Query support Allows easy querying of multimedia data Multimedia databases should have the ability to uniformly query data (media data, textual data) represented in different formats and have the ability to simultaneously query different media sources and conduct classical database operations across them. (Query support) They should have the ability to retrieve media objects from a local storage device in a good manner. (Storage support) They should have the ability to take the response generated by a query and develop a presentation of that response in terms of audio-visual media and have the ability to deliver this presentation. (Presentation and delivery support) == Issues and challenges == Multimedia data consists of a variety of media formats or file representations including TIFF, BMP, PPT, IVUE, FPX, JPEG, MPEG, AVI, MID, WAV, DOC, GIF, EPS, PNG, etc. Because of restrictions on the conversion from one format to the other, the use of the data in a specific format has been limited as well. Usually, the data size of multimedia is large such as video; therefore, multimedia data often require a large storage. Multimedia database consume a lot of processing time, as well as bandwidth. Some multimedia data types such as video, audio, and animation sequences have temporal requirements that have implications on their storage, manipulation and presentation, but images, video and graphics data have special constraints in terms of their content. == Application areas == Examples of multimedia database application areas: Digital Libraries News-on-Demand Video-on-Demand Music database Geographic Information Systems (GIS) Telemedicine

  Read more →
• 

  WeChat

  WeChat or Weixin in Chinese (Chinese: 微信; pinyin: Wēixìn ; lit. 'micro-message') is an instant messaging, social media, and mobile payment app developed by Tencent. First released in 2011, it became the world's largest standalone mobile app in 2018 with over 1 billion monthly active users. The Chinese version of WeChat, Weixin, has been described as China's "app for everything" and a super-app because of its wide range of functions. WeChat provides text messaging, hold-to-talk voice messaging, broadcast (one-to-many) messaging, video conferencing, video games, mobile payment, sharing of photographs and videos and location sharing. It has been described as having "an almost indispensable part of life in China". Accounts registered using Chinese phone numbers are managed under the Weixin brand, and their data is stored in mainland China and subject to Weixin's terms of service and privacy policy. Non-Chinese numbers are registered under WeChat, and WeChat users are subject to a more liberal terms of service and better privacy policy, and their data is stored in the Netherlands for users in the European Union, and in Singapore for other users. User activity on Weixin, the Chinese version of the app, is analyzed, tracked and shared with Chinese authorities upon request as part of the mass surveillance network in China. Chinese-registered Weixin accounts censor politically sensitive topics, and the software license agreement for Weixin (but not WeChat) explicitly forbids content which "[en]danger[s] national security, divulge[s] state secrets, subvert[s] state power and undermine[s] national unity", as well as other types of content such as content that "[u]ndermine[s] national religious policies" and content that is "[i]nciting illegal assembly, association, procession, demonstrations and gatherings disrupting the social order". Due to its central part of Chinese life, a Chinese person having their WeChat account banned can cause a significant disruption to their life. Any interactions between Weixin and WeChat users are subject to the terms of service and privacy policies of both services. == History == By 2010, Tencent had already attained a massive user base with their desktop messenger app QQ. Recognizing smart phones were likely to disrupt this status quo, CEO Pony Ma sought to proactively invest in alternatives to their own QQ messenger app. WeChat began as a project at Tencent Guangzhou Research and Project center in October 2010. The original version of the app was created by Allen Zhang, named "Weixin" (微信) by Pony Ma, and launched in 2011. The user adoption of WeChat was initially very slow, with users wondering why key features were missing; however, after the release of the Walkie-talkie-like voice messaging feature in May of that year, growth surged. By 2012, when the number of users reached 100 million, Weixin was re-branded "WeChat" by President Martin Lau for the international market. During a period of government support of e-commerce development—for example in the 12th five-year plan (2011–2015)—WeChat also saw new features enabling payments and commerce in 2013, which saw massive adoption after their virtual Red envelope promotion for Chinese New Year 2014. WeChat had over 889 million monthly active users by 2016, and as of 2019 WeChat's monthly active users had risen to an estimate of one billion. As of January 2022, it was reported that WeChat has more than 1.2 billion users. After the launch of WeChat payment in 2013, its users reached 400 million the next year, 90 percent of whom were in China. By comparison, Facebook Messenger and WhatsApp had about one billion monthly active users in 2016 but did not offer most of the other services available on WeChat. For example, in Q2 2017, WeChat's revenues from social media advertising were about US$0.9 billion (RMB6 billion) compared with Facebook's total revenues of US$9.3 billion, 98% of which were from social media advertising. WeChat's revenues from its value-added services were US$5.5 billion. By 2018, WeChat had been used by 93.5% of Chinese internet users. In that year, it became the world's largest standalone mobile app in 2018 with over 1 billion monthly active users. In response to a border dispute between India and China, WeChat was banned in India in June 2020 along with several other Chinese apps, including TikTok. U.S. president Donald Trump sought to ban U.S. "transactions" with WeChat through an executive order but was blocked by a preliminary injunction issued in the United States District Court for the Northern District of California in September 2020. Joe Biden officially dropped Trump's efforts to ban WeChat in the U.S. in June 2021. == Features == WeChat, has been described as China's "app for everything" and a super-app because of its wide range of functions. WeChat provides text messaging, hold-to-talk voice messaging, broadcast (one-to-many) messaging, video conferencing, video games, mobile payment, sharing of photographs and videos and location sharing. It has been described as having "an almost indispensable part of life in China". Due to its central part of Chinese life, a Chinese person having their WeChat account banned can cause a significant disruption to their life. === Messaging === WeChat provides a variety of features including text messaging, hold-to-talk voice messaging, broadcast (one-to-many) messaging, video calls and conferencing, video games, photograph and video sharing, as well as location sharing. WeChat also allows users to exchange contacts with people nearby via Bluetooth, as well as providing various features for contacting people at random if desired (if people are open to it). It can also integrate with other social networking services such as Facebook and Tencent QQ. Photographs may also be embellished with filters and captions, and automatic translation service is available and could also translate the conversation during messaging. WeChat supports different instant messaging methods, including text messages, voice messages, walkie talkie, and stickers. Users can send previously saved or live pictures and videos, profiles of other users, coupons, lucky money packages, or current GPS locations with friends either individually or in a group chat. WeChat also provides a message recall feature to allow users to recall and withdraw information (e.g. images, documents) that are sent within 2 minutes in a conversation. WeChat also provides a voice-to-text feature that brings convenience when it is not convenient to listen to voice messages, as well as the basic ability to recognize emojis based on different tones of voice. A distance sensing feature is implemented in WeChat. It has the ability to activate the receivers' hold-to-talk function when the phone was brought in close proximity to the ear. After the receiver was held at a certain distance from the ear, the sensor would then proceed to automatically disable the phone speakers. This feature eliminates the risk of the user's voice messages being inadvertently broadcast to the general public. === Public accounts === WeChat users can register as a public account (公众号), which enables them to push feeds to subscribers, interact with subscribers, and provide subscribers with services. Users can also create an official account, which fall under service, subscription, or enterprise accounts. Once users as individuals or organizations set up a type of account, they cannot change it to another type. By the end of 2014, the number of WeChat official accounts had reached 8 million. Official accounts of organizations can apply to be verified (cost 300 RMB or about US$45). Official accounts can be used as a platform for services such as hospital pre-registrations, or credit card service. To create an official account, the applicant must register with Chinese authorities, which discourages "foreign companies". In April 2022, WeChat announced that it will start displaying the location of users in China every time they post on a public account. Meanwhile, overseas users on public accounts will also display the country based on their IP address. === Moments === "Moments" (朋友圈) is WeChat's brand name for its social feed of friends' updates. "Moments" is an interactive platform that allows users to post images, text, and short videos taken by users. It also allows users to share articles and music (associated with QQ Music or other web-based music services). Friends in the contact list can like the content and leave comments, functioning similarly to a private social network. In 2017 WeChat had a policy of a maximum of two advertisements per day per Moments user. Privacy in WeChat works by groups of friends: only the friends from the user's contact are able to view their Moments' contents and comments. The friends of the user will only be able to see the likes and comments from other users only if they are in a mutual friend group. For example, friends from high school are not able to

  Read more →
• 

  Data access layer

  A data access layer (DAL) is a software architectural layer that provides access to data from one or more sources, such as a relational database, NoSQL database, SQL query engine, file system, or other persistent storage. It separates client code from the details of storage systems, query execution, connection handling, and data retrieval. Data access layers are commonly used to centralize data access logic, reduce coupling between applications and data sources, and provide a consistent interface for retrieving, writing, or querying data. Depending on the system, a data access layer may be implemented as application code, a shared library, an intermediary service, or part of a broader database abstraction layer. == In application architecture == In application software, a data access layer provides a boundary between business logic or application code and the systems used to store or retrieve data. For example, a data access layer may expose methods or interfaces for retrieving, writing, or querying data while hiding details such as connection management, SQL statements, storage APIs, error handling, and result conversion. Depending on the application, the layer may return objects, records, tabular results, documents, streams, or other representations of data. A common implementation is a set of classes, functions, or methods that directly reference database queries, stored procedures, storage APIs, or other data sources. For example, instead of using commands such as insert, delete, and update throughout an application to access a specific table, methods such as registerUser or loginUser may be implemented inside the data access layer. Business logic methods from an application can also be mapped to the data access layer. Instead of making several database queries directly, an application can call a single DAL method that abstracts those database calls. Applications using a data access layer may be either dependent on or independent from a particular database server. If the data access layer supports multiple database systems, the application can use any database system that the DAL can access. In either case, the data access layer provides a centralized location for calls into the underlying data store, which can make it easier to maintain, test, or port the application to other storage systems. == Implementation patterns == A data access layer can be implemented using several patterns and technologies, including data access objects, repositories, stored procedures, query builders, database drivers, or object–relational mapping tools. These mechanisms may implement part or all of a data access layer, but are not always equivalent to the layer itself. Object–relational mapping tools are commonly used in data access layers for object-oriented applications that map records in a relational database to objects in a programming language. Other data access layers may expose lower-level database interfaces, tabular results, document-oriented data, files, streams, or protocol-level interfaces. == Use with multiple underlying data systems == A data access layer may be used to abstract differences between multiple underlying data systems, allowing applications to access them through a more consistent interface. In such designs, applications call the DAL rather than interacting directly with each database or storage system. The layer may then handle connection management, query generation, result mapping, error handling, and other implementation details. A data access layer may be implemented as a shared library or as an intermediary service, such as a proxy or gateway. In this configuration, client applications or services connect to the data access layer, which then communicates with one or more underlying databases or query engines. This can provide a common location for authentication, authorization, logging, routing, and translation between different database interfaces. == Interfaces and protocols == Data access layers may expose or use standardized interfaces and protocols for database access. Examples include Open Database Connectivity (ODBC), Java Database Connectivity (JDBC), database-native wire protocols, and newer interfaces such as Apache Arrow Database Connectivity (ADBC) and Arrow Flight SQL. In systems that support multiple data stores, a data access layer may provide a consistent interface while using different drivers, protocols, or query mechanisms internally. == Distinction from related patterns == A data access layer is related to, but broader than, a data access object, which is usually an object-oriented design pattern for encapsulating access to a persistence mechanism. It is also related to a database abstraction layer, which focuses on hiding differences between database systems. In practice, the terms may overlap.

  Read more →
• 

  Machine unlearning

  Machine unlearning is a branch of machine learning focused on removing specific undesired element, such as private data, wrong or manipulated training data, outdated information, copyrighted material, harmful content, dangerous abilities, or misinformation, without needing to rebuild models from the ground up. Large language models, like the ones powering ChatGPT, may be asked not just to remove specific elements but also to unlearn a "concept," "fact," or "knowledge," which aren't easily linked to specific examples. New terms such as "model editing," "concept editing," and "knowledge unlearning" have emerged to describe this process. == History == Early research efforts were largely motivated by Article 17 of the GDPR, the European Union's privacy regulation commonly known as the "right to be forgotten" (RTBF), introduced in 2014. The GDPR did not anticipate that the development of large language models would make data erasure a complex task. This issue has since led to research on "machine unlearning," with a growing focus on removing copyrighted material, harmful content, dangerous capabilities, and misinformation. Just as early experiences in humans shape later ones, some concepts are more fundamental and harder to unlearn. A piece of knowledge may be so deeply embedded in the model's knowledge graph that unlearning it could cause internal contradictions, requiring adjustments to other parts of the graph to resolve them. Researchers have now also started studying unlearning in the context of removing incorrect or adversarially manipulated training data such as systematically biased labels or poisoning attacks. == Motivations == At present, machine unlearning is motivated by a growing range of concerns that extend well beyond the field's original focus on data privacy. A widely used taxonomy in the literature distinguishes two high-level categories of motivation. Access revocation covers cases where a data subject or rights holder requests the removal of data they own or control. This is most commonly associated with RTBF established by the European Union's General Data Protection Regulation (GDPR) and analogous legislation such as the California Consumer Privacy Act (CCPA). These regulations grant individuals the legal right to request erasure of their personal data from any system that has processed it, including models that were trained on it. Access revocation also encompasses the removal of copyrighted or pay-walled content that was incorporated into training corpora without the necessary licenses, a concern that has become prominent with the widespread use of largely web-scraped pre-training datasets. Model correction covers cases where the model exhibits undesirable behavior arising from the training data, regardless of any individual's request. This includes: Removal of toxic, biased, or unsafe outputs introduced by harmful content in the training set Correction of stale or factually incorrect associations, such as outdated knowledge encoded in a deployed model Removal of dangerous capabilities, such as detailed knowledge of the synthesis of chemical or biological agents Correction of the influence of data poisoning or adversarial attacks that have corrupted model behavior This second category has been formalized as corrective machine unlearning, which frames unlearning as a post-training mechanism for repairing the effects of bad or harmful training data. It is closely related to the AI safety literature, where data filtering alone has been found insufficient to prevent hazardous knowledge from being encoded in model weights, motivating unlearning as a complementary risk mitigation strategy. A further distinction has been drawn in the literature between removal {eliminating the influence of specific training data on model parameters) and suppression (preventing the model from generating specific outputs regardless of how that knowledge is encoded). These two goals are not equivalent: removing training data does not guarantee meaningful output suppression, and suppressing outputs does not constitute removal of the underlying training data's influence. == SISA Training == SISA is a training strategy consisting of four mechanisms designed to make machine unlearning more efficient by structuring how models are trained and updated. Its goal is to allow a system to remove the influence of specific data points without retraining an entire model from scratch. By reorganizing training data and workflows, SISA reduces the computational burden of unlearning requests. Sharding divides the training dataset into multiple disjoint subsets, or shards. Each shard is used to train a separate model instance. This ensures that a single data point affects only one shard, so unlearning it requires updating only the corresponding shard rather than the full model. Isolation refers to training each shard independently, with nothing shared across shards during the training process. This separation prevents cross-contamination between shards, ensuring that forgetting data in one shard does not require adjustments to any others. Slicing breaks the data within each shard into sequential slices and stores model states after each slice is trained on. When an unlearning request targets a piece of data, the system can roll back to the checkpoint before the point was seen and retrain only from that slice forward. This reduces retraining time even within a shard. Aggregation occurs at inference, when the model is queried. It combines the outputs of each shard to determine the output of the overall model. This is often through majority voting or averaging. This allows SISA-trained systems to behave like a single model despite being composed of multiple shard-level models. Together, these mechanisms enable machine learning systems to forget specific data points with far lower computational cost than full retraining. The trade-off is that sharding and slicing can lead to reduced model accuracy, worse generalization, and increased storage requirements for the intermediate checkpoints. This can be tolerable based on the needs of the individual or organization to comply with "right to be forgotten" or efficiently recover from backdoor attacks. == Algorithms == Machine unlearning algorithms are broadly categorized into exact and approximate methods, reflecting a fundamental trade-off between formal guarantees and computational tractability. === Exact Unlearning === Exact unlearning methods produce a model that is statistically indistinguishable from one retrained from scratch on the dataset with the forget data removed. The canonical framework for exact unlearning is SISA Training (Sharded, Isolated, Sliced, and Aggregated), introduced by Bourtoule et al. (2021). SISA partitions the training dataset into disjoint shards and trains a separate sub-model on each. At inference time, predictions are aggregated across sub-models. When an unlearning request is received, only the sub-model corresponding to the shard containing the target data requires retraining, reducing computational overhead proportionally to the number of shards. Exact methods provide the strongest guarantees but become prohibitively expensive for large pre-trained neural networks and are generally limited to settings where training can be structured in advance. === Approximate Unlearning === Approximate unlearning methods seek to produce a model whose behavior is sufficiently close to an exactly unlearned model without the cost of full retraining. These methods dominate practical applications. Common approaches include: Gradient Ascent: The model is fine-tuned by maximizing the loss on the forget set, directly degrading its performance on targeted data. This is the most direct approach but risks destabilizing performance on retained data. Random Labelling: The model is fine-tuned on the forget set using randomly shuffled labels, confusing its associations with the targeted data while producing a less aggressive weight shift than pure gradient ascent. Gradient Difference: Combines gradient ascent on the forget set with simultaneous gradient descent on the retain set, using the retain objective as a regularizer to preserve general model utility. KL Divergence Regularization: Minimizes the KL divergence between the outputs of the unlearned model and the original model on the retain set, anchoring behavior on data the model should remember. Weight Pruning and Fine-tuning: Parameters with the smallest L1-norm are pruned — targeting weights most weakly associated with general knowledge and potentially most associated with the forget set — followed by fine-tuning on the retain set to restore utility. Layer Reset and Fine-tuning: The first or last k layers are re-initialized to random weights and the model is subsequently fine-tuned on the retain set. This is a coarse but computationally simple approach. Selective Synaptic Dampening: Uses influence functions to estimate the effect of individual trainin

  Read more →
• 

  Trustworthy computing

  The term trustworthy computing (TwC) has been applied to computing systems that are inherently secure, available, and reliable. It is particularly associated with the Microsoft initiative of the same name, launched in 2002. == History == Until 1995, there were restrictions on commercial traffic over the Internet. On, May 26, 1995, Bill Gates sent the "Internet Tidal Wave" memorandum to Microsoft executives assigning "...the Internet this highest level of importance..." but Microsoft's Windows 95 was released without a web browser as Microsoft had not yet developed one. The success of the web had caught them by surprise but by mid 1995, they were testing their own web server, and on August 24, 1995, launched a major online service, The Microsoft Network (MSN). The National Research Council recognized that the rise of the Internet simultaneously increased societal reliance on computer systems while increasing the vulnerability of such systems to failure and produced an important report in 1999, "Trust in Cyberspace". This report reviews the cost of un-trustworthy systems and identifies actions required for improvement. == Microsoft and Trustworthy Computing == Bill Gates launched Microsoft's "Trustworthy Computing" initiative with a January 15, 2002 memo, referencing an internal whitepaper by Microsoft CTO and Senior Vice President Craig Mundie. The move was reportedly prompted by the fact that they "...had been under fire from some of its larger customers–government agencies, financial companies and others–about the security problems in Windows, issues that were being brought front and center by a series of self-replicating worms and embarrassing attacks." such as Code Red, Nimda, Klez and Slammer. Four areas were identified as the initiative's key areas: Security, Privacy, Reliability, and Business Integrity, and despite some initial scepticism, at its 10-year anniversary it was generally accepted as having "...made a positive impact on the industry...". The Trustworthy Computing campaign was the main reason why Easter eggs disappeared from Windows, Office and other Microsoft products.

  Read more →
• 

  Computer security

  Computer security (also cybersecurity, digital security, or information technology (IT) security) is a subdiscipline within the field of information security. It focuses on protecting computer software, systems, and networks from threats that can lead to unauthorized information disclosure, theft, or damage to hardware, software, or data, as well as to the disruption or misdirection of the services they provide. The growing significance of computer security reflects the increasing dependence on computer systems, the Internet, and evolving wireless network standards. This reliance has expanded with the proliferation of smart devices, including smartphones, televisions, and other components of the Internet of things (IoT). As digital infrastructure becomes more embedded in everyday life, cybersecurity has emerged as a critical concern. The complexity of modern information systems—and the societal functions they underpin—has introduced new vulnerabilities. Systems that manage essential services, such as power grids, electoral processes, and finance, are particularly sensitive to security breaches. Although many aspects of computer security involve digital security, such as electronic passwords and encryption, physical security measures, such as metal locks, are still used to prevent unauthorized tampering. IT security is not a perfect subset of information security and therefore does not completely align with the security convergence schema. == Vulnerabilities and attacks == A vulnerability refers to a flaw in the structure, execution, functioning, or internal oversight of a computer or system that compromises its security. Most of the vulnerabilities that have been discovered are documented in the Common Vulnerabilities and Exposures (CVE) database. An exploitable vulnerability is one for which at least one working exploit exists. Actors maliciously seeking vulnerabilities are known as threats. Vulnerabilities can be researched, reverse-engineered, hunted, or exploited using automated tools or customized scripts. Various people or parties are vulnerable to cyberattacks; however, different groups are likely to experience different types of attacks more than others. In April 2023, the United Kingdom Department for Science, Innovation & Technology released a report on cyberattacks over the previous 12 months. They surveyed 2,263 UK businesses, 1,174 UK registered charities, and 554 education institutions. The research found that "32% of businesses and 24% of charities overall recall any breaches or attacks from the last 12 months." These figures were much higher for "medium businesses (59%), large businesses (69%), and high-income charities with £500,000 or more in annual income (56%)." Yet, although medium or large businesses are more often the victims, since larger companies have generally improved their security over the last decade, small and midsize businesses (SMBs) have also become increasingly vulnerable as they often "do not have advanced tools to defend the business." SMBs are most likely to be affected by malware, ransomware, phishing, man-in-the-middle attacks, and Denial-of Service (DoS) Attacks. Normal internet users are most likely to be affected by untargeted cyberattacks. These are where attackers indiscriminately target as many devices, services, or users as possible. They do this using techniques that take advantage of the openness of the Internet. These strategies mostly include phishing, ransomware, water holing and scanning. To secure a computer system, it is important to understand the attacks that can be made against it, and these threats can typically be classified into one of the following categories: === Backdoor === A backdoor in a computer system, a cryptosystem or an algorithm, is any secret method of bypassing normal authentication or security controls. These weaknesses may exist for many reasons, including original design or poor configuration. Due to the nature of backdoors, they are of greater concern to companies and databases as opposed to individuals. Backdoors may be added by an authorized party to allow some legitimate access or by an attacker for malicious reasons. Criminals often use malware to install backdoors, giving them remote administrative access to a system. Once they have access, cybercriminals can "modify files, steal personal information, install unwanted software, and even take control of the entire computer." Backdoors can be difficult to detect, as they often remain hidden within source code or system firmware and may require intimate knowledge of the operating system to identify. === Denial-of-service attack === Denial-of-service attacks (DoS) are designed to make a machine or network resource unavailable to its intended users. Attackers can deny service to individual victims, such as by deliberately entering an incorrect password enough consecutive times to cause the victim's account to be locked, or they may overload the capabilities of a machine or network and block all users at once. While a network attack from a single IP address can be blocked by adding a new firewall rule, many forms of distributed denial-of-service (DDoS) attacks are possible, where the attack comes from a large number of points. In this case, defending against these attacks is much more difficult. Such attacks can originate from the zombie computers of a botnet or from a range of other possible techniques, including distributed reflective denial-of-service (DRDoS), where innocent systems are fooled into sending traffic to the victim. With such attacks, the amplification factor makes the attack easier for the attacker because they have to use little bandwidth themselves. To understand why attackers may carry out these attacks, see the 'attacker motivation' section. === Physical access attacks === A direct-access attack is when an unauthorized user (an attacker) gains physical access to a computer, typically to copy data from it or steal information. Attackers may also compromise security by making operating system modifications, installing software worms, keyloggers, covert listening devices or using wireless microphones. Even when the system is protected by standard security measures, these may be bypassed by booting another operating system or tool from a CD-ROM or other bootable media. Disk encryption and the Trusted Platform Module standard are designed to prevent these attacks. Direct service attackers are related in concept to direct memory attacks which allow an attacker to gain direct access to a computer's memory. The attacks "take advantage of a feature of modern computers that allows certain devices, such as external hard drives, graphics cards, or network cards, to access the computer's memory directly." === Eavesdropping === Eavesdropping is the act of surreptitiously listening to a private computer conversation (communication), usually between hosts on a network. It typically occurs when a user connects to a network where traffic is not secured or encrypted and sends sensitive business data to a colleague, which, when listened to by an attacker, could be exploited. Data transmitted across an open network can be intercepted by an attacker using various methods. Unlike malware, direct-access attacks, or other forms of cyberattacks, eavesdropping attacks are unlikely to negatively affect the performance of networks or devices, making them difficult to notice. In fact, "the attacker does not need to have any ongoing connection to the software at all. The attacker can insert the software onto a compromised device, perhaps by direct insertion or perhaps by a virus or other malware, and then come back some time later to retrieve any data that is found or trigger the software to send the data at some determined time." Using a virtual private network (VPN), which encrypts data between two points, is one of the most common forms of protection against eavesdropping. Using the best form of encryption possible for wireless networks is best practice, as well as using HTTPS instead of an unencrypted HTTP. Programs such as Carnivore and NarusInSight have been used by the Federal Bureau of Investigation (FBI) and the NSA to eavesdrop on the systems of internet service providers. Even machines that operate as a closed system (i.e., with no contact with the outside world) can be eavesdropped upon by monitoring the faint electromagnetic transmissions generated by the hardware. TEMPEST is a specification by the NSA referring to these attacks. === Malware === Malicious software (malware) is any software code or computer program "intentionally written to harm a computer system or its users." Once present on a computer, it can leak sensitive details such as personal information, business information and passwords, can give control of the system to the attacker, and can corrupt or delete data permanently. ==== Types of malware ==== Viruses are a specific type of malware, and are normally a malicious code that hijac

  Read more →