AI Generator Character

AI Generator Character — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Microscope image processing

  Microscope image processing is a broad term that covers the use of digital image processing techniques to process, analyze and present images obtained from a microscope. Such processing is now commonplace in a number of diverse fields such as medicine, biological research, cancer research, drug testing, metallurgy, etc. A number of manufacturers of microscopes now specifically design in features that allow the microscopes to interface to an image processing system. == Image acquisition == Until the early 1990s, most image acquisition in video microscopy applications was typically done with an analog video camera, often simply closed circuit TV cameras. While this required the use of a frame grabber to digitize the images, video cameras provided images at full video frame rate (25-30 frames per second) allowing live video recording and processing. While the advent of solid state detectors yielded several advantages, the real-time video camera was actually superior in many respects. Today, acquisition is usually done using a CCD camera mounted in the optical path of the microscope. The camera may be full colour or monochrome. Very often, very high resolution cameras are employed to gain as much direct information as possible. Cryogenic cooling is also common, to minimise noise. Often digital cameras used for this application provide pixel intensity data to a resolution of 12-16 bits, much higher than is used in consumer imaging products. Ironically, in recent years, much effort has been put into acquiring data at video rates, or higher (25-30 frames per second or higher). What was once easy with off-the-shelf video cameras now requires special, high speed electronics to handle the vast digital data bandwidth. Higher speed acquisition allows dynamic processes to be observed in real time, or stored for later playback and analysis. Combined with the high image resolution, this approach can generate vast quantities of raw data, which can be a challenge to deal with, even with a modern computer system. While current CCD detectors allow very high image resolution, often this involves a trade-off because, for a given chip size, as the pixel count increases, the pixel size decreases. As the pixels get smaller, their well depth decreases, reducing the number of electrons that can be stored. In turn, this results in a poorer signal-to-noise ratio. For best results, one must select an appropriate sensor for a given application. Because microscope images have an intrinsic limiting resolution, it often makes little sense to use a noisy, high resolution detector for image acquisition. A more modest detector, with larger pixels, can often produce much higher quality images because of reduced noise. This is especially important in low-light applications such as fluorescence microscopy. Moreover, one must also consider the temporal resolution requirements of the application. A lower resolution detector will often have a significantly higher acquisition rate, permitting the observation of faster events. Conversely, if the observed object is motionless, one may wish to acquire images at the highest possible spatial resolution without regard to the time required to acquire a single image. == 2D image techniques == Image processing for microscopy application begins with fundamental techniques intended to most accurately reproduce the information contained in the microscopic sample. This might include adjusting the brightness and contrast of the image, averaging images to reduce image noise and correcting for illumination non-uniformities. Such processing involves only basic arithmetic operations between images (i.e. addition, subtraction, multiplication and division). The vast majority of processing done on microscope image is of this nature. Another class of common 2D operations called image convolution are often used to reduce or enhance image details. Such "blurring" and "sharpening" algorithms in most programs work by altering a pixel's value based on a weighted sum of that and the surrounding pixels (a more detailed description of kernel based convolution deserves an entry for itself) or by altering the frequency domain function of the image using Fourier Transform. Most image processing techniques are performed in the Frequency domain. Other basic two dimensional techniques include operations such as image rotation, warping, color balancing etc. At times, advanced techniques are employed with the goal of "undoing" the distortion of the optical path of the microscope, thus eliminating distortions and blurring caused by the instrumentation. This process is called deconvolution, and a variety of algorithms have been developed, some of great mathematical complexity. The end result is an image far sharper and clearer than could be obtained in the optical domain alone. This is typically a 3-dimensional operation, that analyzes a volumetric image (i.e. images taken at a variety of focal planes through the sample) and uses this data to reconstruct a more accurate 3-dimensional image. == 3D image techniques == Another common requirement is to take a series of images at a fixed position, but at different focal depths. Since most microscopic samples are essentially transparent, and the depth of field of the focused sample is exceptionally narrow, it is possible to capture images "through" a three-dimensional object using 2D equipment like confocal microscopes. Software is then able to reconstruct a 3D model of the original sample which may be manipulated appropriately. The processing turns a 2D instrument into a 3D instrument, which would not otherwise exist. In recent times this technique has led to a number of scientific discoveries in cell biology. == Analysis == Analysis of images will vary considerably according to application. Typical analysis includes determining where the edges of an object are, counting similar objects, calculating the area, perimeter length and other useful measurements of each object. A common approach is to create an image mask which only includes pixels that match certain criteria, then perform simpler scanning operations on the resulting mask. It is also possible to label objects and track their motion over a series of frames in a video sequence.

  Read more →
• 

  List of security-focused operating systems

  This is a list of operating systems specifically focused on security. Similar concepts include security-evaluated operating systems that have achieved certification from an auditing organization, and trusted operating systems that provide sufficient support for multilevel security and evidence of correctness to meet a particular set of requirements. == Linux == === Android-based === GrapheneOS is a security-focused, Android-based mobile OS that uses a hardened kernel, C library, custom memory allocator (hardened_malloc), and a hardened Chromium-based browser named Vanadium. It also offers privacy/security features, such as Duress PIN/Password or disabling the USB-C port at a driver/hardware level to avoid exploitation. It deploys exploit mitigations such as hardware-based memory tagging, secure app spawning, restricted dynamic code loading, and more. === Debian-based === Linux Kodachi is a security-focused operating system. Tails is aimed at preserving privacy and anonymity. KickSecure is a security-focused Linux distribution that aims to be "hardened by default". It uses network hardening, kernel hardening, Strong Linux User Account Isolation, better randomness, root access restrictions, and app-specific hardening. Whonix is an anonymity focused operating system based on KickSecure. It consists of two virtual machines, And all communications are routed through Tor. === Other Linux distributions === Alpine Linux is designed to be small, simple, and secure. It uses musl, BusyBox, and OpenRC instead of the more commonly used glibc, GNU Core Utilities, and systemd. Owl - Openwall GNU/Linux, a security-enhanced Linux distribution for servers. Secureblue, a Fedora Silverblue based distro that uses a hardened kernel, custom memory allocator (hardened_malloc), Trivalent, a security-focused, Chromium-based browser inspired by Vanadium, and many other exploit mitigations. == BSD == OpenBSD is a Unix-like operating system that emphasizes portability, standardization, correctness, proactive security, and integrated cryptography. == Xen == Qubes OS aims to provide security through isolation. Isolation is provided through the use of virtualization technology. This allows the segmentation of applications into secure virtual machines.

  Read more →
• 

  Snapshot isolation

  In databases, and transaction processing (transaction management), snapshot isolation is a guarantee that all reads made in a transaction will see a consistent snapshot of the database (in practice it reads the last committed values that existed at the time it started), and the transaction itself will successfully commit only if no updates it has made conflict with any concurrent updates made since that snapshot. Snapshot isolation has been adopted by several major database management systems, such as InterBase, Firebird, Oracle, MySQL, PostgreSQL, SQL Anywhere, MongoDB and Microsoft SQL Server (2005 and later). The main reason for its adoption is that it allows better performance than serializability, yet still avoids most of the concurrency anomalies that serializability avoids (but not all). In practice snapshot isolation is implemented within multiversion concurrency control (MVCC), where generational values of each data item (versions) are maintained: MVCC is a common way to increase concurrency and performance by generating a new version of a database object each time the object is written, and allowing transactions' read operations of several last relevant versions (of each object). Snapshot isolation has been used to criticize the ANSI SQL-92 standard's definition of isolation levels, as it exhibits none of the "anomalies" that the SQL standard prohibited, yet is not serializable (the anomaly-free isolation level defined by ANSI). In spite of its distinction from serializability, snapshot isolation is sometimes referred to as serializable by Oracle. == Definition == A transaction executing under snapshot isolation appears to operate on a personal snapshot of the database, taken at the start of the transaction. When the transaction concludes, it will successfully commit only if the values updated by the transaction have not been changed externally since the snapshot was taken. Such a write–write conflict will cause the transaction to abort. In a write skew anomaly, two transactions (T1 and T2) concurrently read an overlapping data set (e.g. values V1 and V2), concurrently make disjoint updates (e.g. T1 updates V1, T2 updates V2), and finally concurrently commit, neither having seen the update performed by the other. Were the system serializable, such an anomaly would be impossible, as either T1 or T2 would have to occur "first", and be visible to the other. In contrast, snapshot isolation permits write skew anomalies. As a concrete example, imagine V1 and V2 are two balances held by a single person, Phil. The bank will allow either V1 or V2 to run a deficit, provided the total held in both is never negative (i.e. V1 + V2 ≥ 0). Both balances are currently $100. Phil initiates two transactions concurrently, T1 withdrawing $200 from V1, and T2 withdrawing $200 from V2. If the database guaranteed serializable transactions, the simplest way of coding T1 is to deduct $200 from V1, and then verify that V1 + V2 ≥ 0 still holds, aborting if not. T2 similarly deducts $200 from V2 and then verifies V1 + V2 ≥ 0. Since the transactions must serialize, either T1 happens first, leaving V1 = −$100, V2 = $100, and preventing T2 from succeeding (since V1 + (V2 − $200) is now −$200), or T2 happens first and similarly prevents T1 from committing. If the database is under snapshot isolation(MVCC), however, T1 and T2 operate on private snapshots of the database: each deducts $200 from an account, and then verifies that the new total is zero, using the other account value that held when the snapshot was taken. Since neither update conflicts, both commit successfully, leaving V1 = V2 = −$100, and V1 + V2 = −$200. Some systems built using multiversion concurrency control (MVCC) may support (only) snapshot isolation to allow transactions to proceed without worrying about concurrent operations, and more importantly without needing to re-verify all read operations when the transaction finally commits. This is convenient because MVCC maintains a series of recent history consistent states. The only information that must be stored during the transaction is a list of updates made, which can be scanned for conflicts fairly easily before being committed. However, MVCC systems (such as MarkLogic) will use locks to serialize writes together with MVCC to obtain some of the performance gains and still support the stronger "serializability" level of isolation. == Workarounds == Potential inconsistency problems arising from write skew anomalies can be fixed by adding (otherwise unnecessary) updates to the transactions in order to enforce the serializability property. Materialize the conflict Add a special conflict table, which both transactions update in order to create a direct write–write conflict. Promotion Have one transaction "update" a read-only location (replacing a value with the same value) in order to create a direct write–write conflict (or use an equivalent promotion, e.g. Oracle's SELECT FOR UPDATE). In the example above, we can materialize the conflict by adding a new table which makes the hidden constraint explicit, mapping each person to their total balance. Phil would start off with a total balance of $200, and each transaction would attempt to subtract $200 from this, creating a write–write conflict that would prevent the two from succeeding concurrently. However, this approach violates the normal form. Alternatively, we can promote one of the transaction's reads to a write. For instance, T2 could set V1 = V1, creating an artificial write–write conflict with T1 and, again, preventing the two from succeeding concurrently. This solution may not always be possible. In general, therefore, snapshot isolation puts some of the problem of maintaining non-trivial constraints onto the user, who may not appreciate either the potential pitfalls or the possible solutions. The upside to this transfer is better performance. == Terminology == Snapshot isolation is called "serializable" mode in Oracle and PostgreSQL versions prior to 9.1, which may cause confusion with the "real serializability" mode. There are arguments both for and against this decision; what is clear is that users must be aware of the distinction to avoid possible undesired anomalous behavior in their database system logic. == History == Snapshot isolation arose from work on multiversion concurrency control databases, where multiple versions of the database are maintained concurrently to allow readers to execute without colliding with writers. Such a system allows a natural definition and implementation of such an isolation level. InterBase, later owned by Borland, was acknowledged to provide SI rather than full serializability in version 4, and likely permitted write-skew anomalies since its first release in 1985. Unfortunately, the ANSI SQL-92 standard was written with a lock-based database in mind, and hence is rather vague when applied to MVCC systems. Berenson et al. wrote a paper in 1995 critiquing the SQL standard, and cited snapshot isolation as an example of an isolation level that did not exhibit the standard anomalies described in the ANSI SQL-92 standard, yet still had anomalous behaviour when compared with serializable transactions. In 2008, Cahill et al. showed that write-skew anomalies could be prevented by detecting and aborting "dangerous" triplets of concurrent transactions. This implementation of serializability is well-suited to multiversion concurrency control databases, and has been adopted in PostgreSQL 9.1, where it is known as Serializable Snapshot Isolation (SSI). When used consistently, this eliminates the need for the above workarounds. The downside over snapshot isolation is an increase in aborted transactions. This can perform better or worse than snapshot isolation with the above workarounds, depending on workload.

  Read more →
• 

  Fantavision

  Fantavision is an animation program by Scott Anderson for the Apple II and published by Broderbund in 1985. Versions were released for the Apple IIGS (1987), Amiga (1988), and MS-DOS (1988). Fantavision allows the creation of vector graphics animations using the mouse and keyboard. The user creates frames, and the software generates the frames between them. Because this is done in real-time, it allows for creative exploration and quick changes. The program uses a graphical user interface in the style of the Macintosh with pull-down menus and black text on a white background. Advertisements claimed Fantavision a revolutionary breakthrough that brings the animation features of "tweening" and "transforming" to home computers. == Reception == Compute! in 1989 called Fantavision the best animation program for the IBM PC, although it noted the inability to draw curves. == Reviews == Games #70

  Read more →
• 

  Three-factor learning

  In neuroscience and machine learning, three-factor learning is the combination of Hebbian plasticity with a third modulatory factor to stabilise and enhance synaptic learning. This third factor can represent various signals such as reward, punishment, error, surprise, or novelty, often implemented through neuromodulators. == Description == Three-factor learning introduces the concept of eligibility traces, which flag synapses for potential modification pending the arrival of the third factor, and helps temporal credit assignement by bridging the gap between rapid neuronal firing and slower behavioral timescales, from which learning can be done. Biological basis for Three-factor learning rules have been supported by experimental evidence. This approach addresses the instability of classical Hebbian learning by minimizing autocorrelation and maximizing cross-correlation between inputs.

  Read more →
• 

  Zolostays

  Zolostays is a real-tech co-living focused startup that provides ready-to-move rooms/beds. It was founded in 2015 by Nikhil Sikri, Akhil Sikri and Sneha Choudhry. == Overview == During the pandemic, Zolo provided 75 of rent-free accommodation to those who lost their jobs. Zolo uses bulk inventory in usually residential township and ties up with real estate companies to make the rooms/beds available. Zolostays has both revenue sharing and leased model. == History == Zolostays was founded in 2015 to solve the problem of students and young professionals who would move to temporarily go to other cities to study and work and look for affordable housing. In 2020, it was operating in 10 Indian cities. It has four round of funding, with total $98 million.

  Read more →
• 

  Joint constraints

  Joint constraints are rotational constraints on the joints of an artificial system. They are used in an inverse kinematics chain, in fields including 3D animation or robotics. Joint constraints can be implemented in a number of ways, but the most common method is to limit rotation about the X, Y and Z axis independently. An elbow, for instance, could be represented by limiting rotation on X and Z axis to 0 degrees, and constraining the Y-axis rotation to 130 degrees. To simulate joint constraints more accurately, dot-products can be used with an independent axis to repulse the child bones orientation from the unreachable axis. Limiting the orientation of the child bone to a border of vectors tangent to the surface of the joint, repulsing the child bone away from the border, can also be useful in the precise restriction of shoulder movement.

  Read more →
• 

  Scanimate

  Scanimate is an analog computer animation (video synthesizer) system created by Lee Harrison III of Denver, Colorado. Harrison had developed its predecessor, ANIMAC, which generated used a motion capture system, based on a body suit with potentiometers. In contrast, Scanimate included TV technology. Scanimate's successor was called Caesar, and used a digital computer to control the analog system. The eight Scanimate systems were used to produce much of the video-based animation seen on television between most of the 1970s and early 1980s in commercials, promotions, and show openings. One of the major advantages the Scanimate system had over film-based animation and computer animation was the ability to create animations in real time. The speed with which animation could be produced on the system because of this, as well as its range of possible effects, helped it to supersede film-based animation techniques for television graphics. By the mid-1980s, it was superseded by digital computer animation, which produced sharper images and more sophisticated 3D imagery. Animations created on Scanimate and similar analog computer animation systems have a number of characteristic features that distinguish them from film-based animation: the motion is extremely fluid, using all 60 fields per second (in NTSC format video) or 50 fields (in PAL format video) rather than the 24 frames per second that film uses; the colors are much brighter and more saturated; and the images have a very "electronic" look that results from the direct manipulation of video signals through which the Scanimate produces the images. == How it works == A special high-resolution (around 945 lines) monochrome camera records high-contrast artwork. The image is then displayed on a high-resolution screen. Unlike a normal monitor, its deflection signals are passed through a special analog computer that enables the operator to bend the image in a variety of ways. The image is then shot from the screen by either a film camera or a video camera. In the case of a video camera, this signal is then fed into a colorizer, a device that takes certain shades of grey and turns it into color as well as transparency. The idea behind this is that the output of the Scanimate itself is always monochrome. Another advantage of the colorizer is that it gives the operator the ability to continuously add layers of graphics. This makes possible the creation of very complex graphics. This is done by using two video recorders. The background is played by one recorder and then recorded by another one. This process is repeated for every layer. This requires very high-quality video recorders (such as both the Ampex VR-2000 or IVC's IVC-9000 of Scanimate's era, the IVC-9000 being used quite frequently for Scanimate composition due to its very high generational quality between re-recordings). == Current usage == Two of the Scanimates are still in use at ZFx studios in Asheville, North Carolina. The original "Black Swan" R&D machine has been updated with more modern power supplies and can produce material in standard or 1080P high definition video. The "white Pearl" machine is the last one produced and is being kept in its original configuration for historical purposes by David Sieg at ZFx inc. The machines are installed in a working production environment with Grass Valley switchers, Kaleidoscope digital video effects systems, and Accom digital disk recorders for layering. == Use in television, music and films == === Music videos === Let's Groove by Earth, Wind & Fire Get Down on It by Kool & the Gang Blame It on the Boogie by The Jacksons Knock on Wood by Amii Stewart Popcorn Love by New Edition === TV programs/movies === === TV channels/home video/TV productions ===

  Read more →
• 

  Artificial general intelligence

  Artificial general intelligence (AGI) is a hypothetical type of artificial intelligence that matches or surpasses human capabilities across virtually all cognitive tasks. Beyond AGI, artificial superintelligence (ASI) would outperform the best human abilities across every domain by a wide margin. Unlike artificial narrow intelligence (ANI), whose competence is confined to well‑defined tasks, an AGI system can generalise knowledge, transfer skills between domains, and solve novel problems without task‑specific reprogramming. Creating AGI is a stated goal of technology companies such as OpenAI, Google, xAI, and Meta. A 2020 survey identified 72 active AGI research and development projects across 37 countries. AGI is a common topic in science fiction and futures studies. Contention exists over whether AGI represents an existential risk. Some AI experts and industry figures have stated that mitigating the risk of human extinction posed by AGI should be a global priority. Others find the development of AGI to be in too remote a stage to present such a risk. == Terminology == AGI is also known as strong AI, full AI, human-level AI, human-level intelligent AI, or general intelligent action. The term "artificial general intelligence" was used in 1997 by Mark Gubrud in a discussion of the implications of fully automated military production and operations. A mathematical formalism of AGI named AIXI was proposed in 2000 by Marcus Hutter, who defines intelligence as "an agent’s ability to achieve goals or succeed in a wide range of environments". This type of AGI has also been called "universal artificial intelligence". The term AGI was re-introduced and popularized by Shane Legg and Ben Goertzel around 2002. Some academic sources reserve the term "strong AI" for computer programs that will experience sentience or consciousness. In contrast, weak AI (or narrow AI) can solve a specific problem but lacks general cognitive abilities. Some academic sources use "weak AI" to refer more broadly to any programs that neither experience consciousness nor have a mind in the same sense as humans. Related concepts include artificial superintelligence and transformative AI. An artificial superintelligence (ASI) is a hypothetical type of AGI that is much more generally intelligent than humans, while the notion of transformative AI relates to AI having a large impact on society, for example, similar to the agricultural or industrial revolution. A framework for classifying AGI was proposed in 2023 by Google DeepMind researchers. They define five performance levels of AGI: emerging, competent, expert, virtuoso, and superhuman. For example, a competent AGI is defined as an AI that outperforms 50% of skilled adults in a wide range of non-physical tasks, and a superhuman AGI (i.e., an artificial superintelligence) is similarly defined but with a threshold of 100%. They consider large language models like ChatGPT or LLaMA 2 to be instances of emerging AGI (comparable to unskilled humans). Regarding the autonomy of AGI and associated risks, they define five levels: tool (fully in human control), consultant, collaborator, expert, and agent (fully autonomous). == Characteristics == There is no single agreed-upon definition of intelligence as applied to computers. Computer scientist John McCarthy wrote in 2007: "We cannot yet characterize in general what kinds of computational procedures we want to call intelligent." === Intelligence traits === Researchers generally hold that a system is required to do all of the following to be regarded as an AGI: reason, use strategy, solve puzzles, and make judgments under uncertainty, represent knowledge, including common sense knowledge, plan, learn, communicate in natural language, if necessary, integrate these skills in completion of any given goal. Many interdisciplinary approaches (e.g. cognitive science, computational intelligence, and decision making) consider additional traits such as imagination (the ability to form novel mental images and concepts) and autonomy. Computer-based systems exhibiting these capabilities are now widespread, with modern large language models demonstrating computational creativity, automated reasoning, and decision support simultaneously across domains. === Physical traits === Other capabilities are considered desirable in intelligent systems, as they may affect intelligence or aid in its expression. These include: the ability to sense (e.g. see, hear, etc.), and the ability to act (e.g. move and manipulate objects, change location to explore, etc.) This includes the ability to detect and respond to hazard. === Tests for human-level AGI === Several tests meant to confirm human-level AGI have been considered. ==== Turing test ==== The Turing test was proposed by Alan Turing in his 1950 paper "Computing Machinery and Intelligence". This test involves a human judge engaging in natural language conversations with both a human and a machine designed to generate human-like responses. The machine passes the test if it can convince the judge that it is human a significant fraction of the time. Turing proposed this as a practical measure of machine intelligence, focusing on the ability to produce human-like responses rather than on the internal workings of the machine. The idea of the test is that the machine has to try and pretend to be a man, by answering questions put to it, and it will only pass if the pretence is reasonably convincing. A considerable portion of a jury, who should not be experts about machines, must be taken in by the pretence. In 2014, a chatbot named Eugene Goostman, designed to imitate a 13-year-old Ukrainian boy, reportedly passed a Turing Test event by convincing 33% of judges that it was human. However, this claim was met with significant skepticism from the AI research community, who questioned the test's implementation and its relevance to AGI. A 2025 pre‑registered, three‑party Turing‑test study by Cameron R. Jones and Benjamin K. Bergen showed that GPT-4.5 was judged to be the human in 73% of five‑minute text conversations—surpassing the 67% humanness rate of real confederates and meeting the researchers' criterion for having passed the test. ==== Ikea test ==== The "Ikea test", also known as the Flat Pack Furniture Test, involves an AI controlling a robot which attempts to assemble an Ikea flat-pack furniture product after having been shown the parts and instructions. As early as 2013, MIT's IkeaBot demonstrated fully autonomous multi-robot assembly of an IKEA Lack table in ten minutes, with no human intervention and no pre-programmed assembly instructions. The robots inferred the assembly sequence from the geometry of the parts alone. ==== Coffee test ==== Steve Wozniak proposed a test where a machine is required to enter an average American home and figure out how to make coffee. It must find the coffee machine, find the coffee, add water, find a mug, and brew the coffee by pushing the proper buttons. This test has been substantially approached across multiple systems. In January 2024, Figure AI's Figure 01 humanoid learned to operate a Keurig coffee machine autonomously after watching video demonstrations, using end-to-end neural networks to translate visual input into motor actions. In 2025, researchers at the University of Edinburgh published the ELLMER framework in Nature Machine Intelligence, demonstrating a robotic arm that interprets verbal instructions, analyses its surroundings, and autonomously makes coffee in dynamic kitchen environments — adapting to unforeseen obstacles in real time rather than following pre-programmed sequences. ==== Suleyman's test ==== Mustafa Suleyman's test proposes giving an AI model US$100,000 and asking it to obtain US$1 million. ==== Use of video-games ==== Adams, et al. propose that the ability to learn and succeed in a wide range of video games can be used to test AI intelligence. This range would include games unknown to the AGI developers before the test is administered. === AI-complete problems === A problem is informally called "AI-complete" or "AI-hard" if it is believed that AGI would be needed to solve it, because the solution is beyond the capabilities of a purpose-specific algorithm. == History == === Classical AI === Modern AI research began in the mid-1950s. The first generation of AI researchers were convinced that artificial general intelligence was possible and that it would exist in just a few decades. AI pioneer Herbert A. Simon wrote in 1965: "machines will be capable, within twenty years, of doing any work a man can do". Their predictions were the inspiration for Stanley Kubrick and Arthur C. Clarke's fictional character HAL 9000, who embodied what AI researchers believed they could create by the year 2001. AI pioneer Marvin Minsky was a consultant on the project of making HAL 9000 as realistic as possible according to the consensus predictions of the time. He said in 1967, "Within a generation... the problem of

  Read more →
• 

  Dark mode

  A dark mode, dark theme, night mode, or light-on-dark color scheme is a color scheme that uses light-colored text, icons, and graphical user interface elements on a dark background. It is often discussed in terms of computer user interface design and web design. Many modern websites and operating systems offer the user an optional light-on-dark display mode. Some users find dark mode displays more visually appealing, and claim that it can reduce eye strain. Displaying white at full brightness uses roughly six times as much power as pure black on a 2016 Google Pixel, which has an OLED display. However, conventional LED displays may not benefit from reduced power consumption; but if a LED display has the partial dimming features, it still benefits from reduced power consumption. Most modern operating systems support an optional light-on-dark color scheme. == History == Microsoft introduced the high contrast themes in Windows 95. Later, Microsoft introduced a dark theme in the Anniversary Update of Windows 10 in 2016. In 2018, Apple followed in macOS Mojave. In September 2019, iOS 13 and Android 10 both introduced dark modes. Some operating systems provide tools to change the dark mode state automatically at sundown or sunrise. A "prefers-color-scheme" option was created for front-end web developers in 2019, being a CSS property that signals a user's choice for their system to use a light or dark color theme. Firefox and Chromium have optional dark theme for all internal screens. It is also possible for third-party developers to implement their own dark themes. There are also a variety of browser add-ons that can re-theme web sites with dark color schemes, also aligning with system theme. Wikipedia's mobile and desktop versions received a dark mode option in 2024. == Implementation == There is a prefers-color-scheme media query in CSS, to detect if the user has requested light or dark color scheme and serve the requested color scheme. It can be indicated from the user's operating system preference or a user agent. CSS example: JavaScript example: == Energy usage == Light on dark color schemes require less energy to display on OLED displays. This positively impacts battery life and reduces energy consumption. While an OLED will consume around 40% of the power of an LCD displaying an image that is primarily black, it can use more than three times as much power to display an image with a white background, such as a document or web site. This can lead to reduced battery life and higher energy usage unless a light-on-dark color scheme is used. The long-term reduced power usage may also prolong battery life or the useful life of the display and battery. The energy savings that can be achieved using a light-on-dark color scheme are because of how OLED screens work: in an OLED screen, each subpixel generates its own light and it only consumes power when generating light. This is in contrast to how an LCD works: in an LCD, subpixels either block or allow light from an always-on (lit) LED backlight to pass through. "AMOLED Black" color schemes (that use pure black instead of dark gray) do not necessarily save more energy than other light-on-dark color schemes that use dark gray instead of black, as the power consumption on an AMOLED screen decreases proportionately to the average brightness of the displayed pixels. Although it is true that AMOLED black does save more energy than dark gray, the additional energy savings are often negligible; AMOLED black will only give an additional energy saving of less than 1%, for instance, over the dark gray that's used in the dark theme for Google's official Android apps. In November 2018, Google confirmed that dark mode on Android saved battery life. == Web issues == Some argue that a color scheme with light text on a dark background is easier to read on the screen, because the lower overall brightness causes less eyestrain, while others argue to the contrary. Some pages on the web are designed for white backgrounds; Image assets (GIF, PNG, SVG, WOFF, etc) can be used improperly causing visual artifacts if dark mode is forced (instead of designed for) with a plugin like Dark Reader.

  Read more →
• 

  Confused deputy problem

  In information security, a confused deputy is a computer program that is tricked by another program (with fewer privileges or less rights) into misusing its authority on the system. It is a specific type of privilege escalation. The confused deputy problem is often cited as an example of why capability-based security is important. Capability systems protect against the confused deputy problem, whereas access-control list–based systems do not. Such systems can mitigate the confused deputy problem by eliminating ambient authority, allowing programs to act only on resources for which they hold explicit capabilities, whereas access-control list–based systems are more susceptible to it. However, this protection depends on correct implementation; in formally verified capability systems such as seL4, it can be shown that the kernel enforces capability constraints correctly, preventing such behavior at the system level. == Example == In the original example of a confused deputy, there was a compiler program provided on a commercial timesharing service. Users could run the compiler and optionally specify a filename where it would write debugging output, and the compiler would be able to write to that file if the user had permission to write there. The compiler also collected statistics about language feature usage. Those statistics were stored in a file called "(SYSX)STAT", in the directory "SYSX". To make this possible, the compiler program was given permission to write to files in SYSX. But there were other files in SYSX: in particular, the system's billing information was stored in a file "(SYSX)BILL". A user ran the compiler and named "(SYSX)BILL" as the desired debugging output file. This produced a confused deputy problem. The compiler made a request to the operating system to open (SYSX)BILL. Even though the user did not have access to that file, the compiler did, so the open succeeded. The compiler wrote the compilation output to the file (here "(SYSX)BILL") as normal, overwriting it, and the billing information was destroyed. === The confused deputy === In this example, the compiler program is the deputy because it is acting at the request of the user. The program is seen as 'confused' because it was tricked into overwriting the system's billing file. Whenever a program tries to access a file, the operating system needs to know two things: which file the program is asking for, and whether the program has permission to access the file. In the example, the file is designated by its name, “(SYSX)BILL”. The program receives the file name from the user, but does not know whether the user had permission to write the file. When the program opens the file, the system uses the program's permission, not the user's. When the file name was passed from the user to the program, the permission did not go along with it; the permission was increased by the system silently and automatically. It is not essential to the attack that the billing file be designated by a name represented as a string. The essential points are that: the designator for the file does not carry the full authority needed to access the file; the program's own permission to access the file is used implicitly. == Other examples == A cross-site request forgery (CSRF) is an example of a confused deputy attack that uses the web browser to perform sensitive actions against a web application. A common form of this attack occurs when a web application uses a cookie to authenticate all requests transmitted by a browser. Using JavaScript, an attacker can force a browser into transmitting authenticated HTTP requests. The Samy computer worm used cross-site scripting (XSS) to turn the browser's authenticated MySpace session into a confused deputy. Using XSS the worm forced the browser into posting an executable copy of the worm as a MySpace message which was then viewed and executed by friends of the infected user. Clickjacking is an attack where the user acts as the confused deputy. In this attack a user thinks they are harmlessly browsing a website (an attacker-controlled website) but they are in fact tricked into performing sensitive actions on another website. An FTP bounce attack can allow an attacker to connect indirectly to TCP ports to which the attacker's machine has no access, using a remote FTP server as the confused deputy. Another example relates to personal firewall software. It can restrict Internet access for specific applications. Some applications circumvent this by starting a browser with instructions to access a specific URL. The browser has authority to open a network connection, even though the application does not. Firewall software can attempt to address this by prompting the user in cases where one program starts another which then accesses the network. However, the user frequently does not have sufficient information to determine whether such an access is legitimate—false positives are common, and there is a substantial risk that even sophisticated users will become habituated to clicking "OK" to these prompts. Not every program that misuses authority is a confused deputy. Sometimes misuse of authority is simply a result of a program error. The confused deputy problem occurs when the designation of an object is passed from one program to another, and the associated permission changes unintentionally, without any explicit action by either party. It is insidious because neither party did anything explicit to change the authority. Another example is when an administrator authorizes an AI agent to act on their behalf, and that AI subsequently delegates authority to another AI agent neither vetted nor authorized by the original administrator. The unvetted AI can then act without permissions or oversight from the original developer. == Solutions == In some systems it is possible to ask the operating system to open a file using the permissions of another client. This solution has some drawbacks: It requires explicit attention to security by the server. A naive or careless server might not take this extra step. It becomes more difficult to identify the correct permission if the server is in turn the client of another service and wants to pass along access to the file. It requires the client to trust the server to not abuse the borrowed permissions. Note that intersecting the server and client's permissions does not solve the problem either, because the server may then have to be given very wide permissions (all of the time, rather than those needed for a given request) in order to act for arbitrary clients. The simplest way to solve the confused deputy problem is to bundle together the designation of an object and the permission to access that object. This is exactly what a capability is. Using capability security in the compiler example, the client would pass to the server a capability to the output file, such as a file descriptor, rather than the name of the file. Since it lacks a capability to the billing file, it cannot designate that file for output. In the cross-site request forgery example, a URL supplied "cross"-site would include its own authority independent of that of the client of the web browser.

  Read more →
• 

  Tactical NAV

  Tactical NAV, also known as TACNAV-X, is a location-based tracking app designed for use by military personnel. The app is primarily designed to assist in pinpointing enemy fire and mapping waypoints. Tactical NAV also helps users efficiently relay critical information to tactical operations centers for prompt decision-making regarding airstrikes or medical evacuations. The TACNAV-X platform is intended to enhance situational awareness, refine navigation capabilities, and assist in tactical decision-making across various operational environments. == Overview == Tactical NAV allows users to pinpoint enemy fire. == History == Tactical NAV was designed by U.S. Army Captain Jonathan J. Springer, a Field Artillery officer serving as a Battalion Fire Support Officer (FSO) in the 101st Airborne Division. Springer conceived the idea for the app during his third tour in Afghanistan in support of Operation Enduring Freedom. On June 25, 2010, after a rocket attack by the Taliban killed two soldiers in his battalion, he was inspired to create an app that would prevent similar losses in the future, enhance situational awareness, and assist soldiers serving on combat deployments. In 2010, Springer founded TacNav Systems (formerly AppDaddy Technologies) to develop mobile applications for use by military personnel. He tested the app during combat operations in eastern Afghanistan and verified TACNAV-X's accuracy using DAGRs, AFATDS, Falcon View, CPOF, ATAK, and other approved Department of Defense (DoD) systems. As of 2012, the app had been downloaded 8,000 times.

  Read more →
• 

  Distributed manufacturing

  Distributed manufacturing, also known as distributed production, cloud producing, distributed digital manufacturing, and local manufacturing, is a form of decentralized manufacturing practiced by enterprises using a network of geographically dispersed manufacturing facilities that are coordinated using information technology. It can also refer to local manufacture via the historic cottage industry model, or manufacturing that takes place in the homes of consumers. == Enterprise == In enterprise environments, the primary attribute of distributed manufacturing is the ability to create value at geographically dispersed locations. For example, shipping costs could be minimized when products are built geographically close to their intended markets. Also, products manufactured in a number of small facilities distributed over a wide area can be customized with details adapted to individual or regional tastes. Manufacturing components in different physical locations and then managing the supply chain to bring them together for final assembly of a product is also considered a form of distributed manufacturing. Digital networks combined with additive manufacturing allow companies a decentralized and geographically independent distributed production (cloud manufacturing). == Consumer == Within the maker movement and DIY culture, small scale production by consumers often using peer-to-peer resources is being referred to as distributed manufacturing. Consumers download digital designs from an open design repository website like Youmagine or Thingiverse and produce a product for low costs through a distributed network of 3D printing services such as 3D Hubs, Geomiq. In the most distributed form of distributed manufacturing the consumer becomes a prosumer and manufacturers products at home with an open-source 3-D printer such as the RepRap. In 2013 a desktop 3-D printer could be economically justified as a personal product fabricator and the number of free and open hardware designs were growing exponentially. Today there are millions of open hardware product designs at hundreds of repositories and there is some evidence consumers are 3-D printing to save money. For example, 2017 case studies probed the quality of: (1) six common complex toys; (2) Lego blocks; and (3) the customizability of open source board games and found that all filaments analyzed saved the prosumer over 75% of the cost of commercially available true alternative toys and over 90% for recyclebot filament. Overall, these results indicate a single 3D printing repository, MyMiniFactory, is saving consumers well over $60 million/year in offset purchases of only toys. These 3-D printers can now be used to make sophisticated high-value products like scientific instruments. Similarly, a study in 2022 found that 81% of open source designs provided economic savings and the total savings for the 3D printing community is more than $35 million from downloading only the top 100 products at YouMagine. In general, the savings are largest when compared to conventional products when prosumers use recycled materials in 'distributed recycling and additive manufacturing' (DRAM). == Emergency Distributed Manufacturing During COVID-19 Pandemic == Distributed manufacturing became far more visible during the COVID-19 pandemic because it offered a practical response to the breakdown of centralized global supply chains. As lock downs, border restrictions, and factory shutdowns disrupted conventional production, decentralized networks using local facilities such as Open Source Medical Supplies stepped in and manufactured over 48 million products. Additive manufacturing /3D printing were used to produce urgently needed items such as face shields, ventilators and their components, nasopharyngeal swabs, and other personal protective equipment. This demonstrated that distributed manufacturing could reduce lead times, improve responsiveness, and lessen dependence on distant suppliers during crisis conditions for a wide range of products. Peer-reviewed studies on pandemic-era manufacturing note that additive manufacturing was especially valuable because digital design files could be shared rapidly and produced close to the point of need, enabling hospitals, universities, small firms, and maker communities to supplement strained medical supply chains. The pandemic also helped shift distributed manufacturing from being seen as a niche or experimental model to a credible strategy for resilience, flexibility, and emergency response. At the same time, scholars caution that its wider adoption depends on solving issues related to quality assurance, regulation, material consistency, and coordination across distributed production sites. Overall, COVID-19 popularized distributed manufacturing by showing that localized, digitally enabled production could complement traditional manufacturing systems when speed, adaptability, and supply-chain resilience were critical. == Social change == Some call attention to the conjunction of commons-based peer production with distributed manufacturing techniques. The self-reinforced fantasy of a system of eternal growth can be overcome with the development of economies of scope, and here, the civil society can play an important role contributing to the raising of the whole productive structure to a higher plateau of more sustainable and customised productivity. Further, it is true that many issues, problems and threats rise due to the large democratization of the means of production, and especially regarding the physical ones. For instance, the recyclability of advanced nanomaterials is still questioned; weapons manufacturing could become easier; not to mention the implications on counterfeiting and on "intellectual property". It might be maintained that in contrast to the industrial paradigm whose competitive dynamics were about economies of scale, commons-based peer production and distributed manufacturing could develop economies of scope. While the advantages of scale rest on cheap global transportation, the economies of scope share infrastructure costs (intangible and tangible productive resources), taking advantage of the capabilities of the fabrication tools. And following Neil Gershenfeld in that "some of the least developed parts of the world need some of the most advanced technologies", commons-based peer production and distributed manufacturing may offer the necessary tools for thinking globally but act locally in response to certain problems and needs. As well as supporting individual personal manufacturing social and economic benefits are expected to result from the development of local production economies. In particular, the humanitarian and development sector are becoming increasingly interested in how distributed manufacturing can overcome the supply chain challenges of last mile distribution. Further, distributed manufacturing has been proposed as a key element in the Cosmopolitan localism or cosmolocalism framework to reconfigure production by prioritizing socio-ecological well-being over corporate profits, over-production and excess consumption. == Technology == By localizing manufacturing, distributed manufacturing may enable a balance between two opposite extreme qualities in technology development: Low technology and High tech. This balance is understood as an inclusive middle, a "mid-tech", that may go beyond the two polarities, incorporating them into a higher synthesis. Thus, in such an approach, low-tech and high-tech stop being mutually exclusive. They instead become a dialectic totality. Mid-tech may be abbreviated to "both…and…" instead of "neither…nor…". Mid-tech combines the efficiency and versatility of digital/automated technology with low-tech's potential for autonomy and resilience. == Contracting in Distributed Manufacturing == Research into contracting and order processing models tailored for distributed manufacturing has highlighted the need for flexible, role-based frameworks and advanced digital tools. These tools and frameworks are essential for addressing issues related to quality assurance, payment structures, legal compliance, and coordination among multiple actors. By addressing these challenges, contracting models for distributed manufacturing can unlock its potential for more localized, efficient, and sustainable production systems. A system prototype has been developed to simplify contracting for distributed manufacturing. This tool allows buyers to manage orders across multiple manufacturers using a single interface, automating workflows to ensure clarity and accountability for everyone involved. This research was led by the Internet of Production, as part of the mAkE project (African European Maker Innovation Ecosystem), funded by the European Horizon 2020 research and innovation programme.

  Read more →
• 

  Immediate mode (computer graphics)

  Immediate mode is an API design pattern in computer graphics libraries, in which the client calls directly cause rendering of graphics objects to the display, or in which the data to describe rendering primitives is inserted frame by frame directly from the client into a command list (in the case of immediate mode primitive rendering), without the use of extensive indirection – thus immediate – to retained resources. It does not preclude the use of double-buffering. Retained mode is an alternative approach. Historically, retained mode has been the dominant style in GUI libraries; however, both can coexist in the same library and are not necessarily exclusive in practice. == Overview == In immediate mode, the scene (complete object model of the rendering primitives) is retained in the memory space of the client, instead of the graphics library. This implies that in an immediate mode application, the lists of graphical objects to be rendered are kept by the client and are not saved by the graphics library API. The application must re-issue all drawing commands required to describe the entire scene each time a new frame is required, regardless of actual changes. This method provides on the one hand a maximum of control and flexibility to the application program, but on the other hand it also generates continuous work load on the CPU. Examples of immediate mode rendering systems include Direct2D, OpenGL and Quartz. There are some immediate mode GUIs that are particularly suitable when used in conjunction with immediate mode rendering systems. == Immediate mode primitive rendering == Primitive vertex attribute data may be inserted frame by frame into a command buffer by a rendering API. This involves significant bandwidth and processor time (especially if the graphics processing unit is on a separate bus), but may be advantageous for data generated dynamically by the CPU. It is less common since the advent of increasingly versatile shaders, with which a graphics processing unit may generate increasingly complex effects without the need for CPU intervention. == Immediate mode rendering with vertex buffers == Although drawing commands have to be re-issued for each new frame, modern systems using this method are generally able to avoid the unnecessary duplication of more memory-intensive display data by referring to that unchanging data (via indirection) (e.g. textures and vertex buffers) in the drawing commands. == Immediate mode GUI == Graphical user interfaces traditionally use retained mode-style API design, but immediate mode GUIs instead use an immediate mode-style API design, in which user code directly specifies the GUI elements to draw in the user input loop. For example, rather than having a CreateButton() function that a user would call once to instantiate a button, an immediate-mode GUI API may have a DoButton() function which should be called whenever the button should be on screen. The technique was developed by Casey Muratori in 2002. Prominent implementations include Omar Cornut's Dear ImGui in C++, Nic Barker's Clay in C and Micha Mettke's Nuklear in C.

  Read more →
• 

  Patent visualisation

  Patent visualisation is an application of information visualisation. The number of patents has been increasing, encouraging companies to consider intellectual property as a part of their strategy. Patent visualisation, like patent mapping, is used to quickly view a patent portfolio. Software dedicated to patent visualisation began to appear in 2000, for example Aureka from Aurigin (now owned by Thomson Reuters). Many patent and portfolio analytics platforms, such as Questel, Patent Forecast, PatSnap, Patentcloud, Relecura, and Patent iNSIGHT Pro, offer options to visualise specific data within patent documents by creating topic maps, priority maps, IP Landscape reports, etc. Software converts patents into infographics or maps, to allow the analyst to "get insight into the data" and draw conclusions. Also called patinformatics, it is the "science of analysing patent information to discover relationships and trends that would be difficult to see when working with patent documents on a one-and-one basis". Patents contain structured data (like publication numbers) and unstructured text (like title, abstract, claims and visual info). Structured data are processed by data-mining and unstructured data are processed with text-mining. == Data mining == The main step in processing structured information is data-mining, which emerged in the late 1980s. Data mining involves statistics, artificial intelligence, and machine learning. Patent data mining extracts information from the structured data of the patent document. These structured data are bibliographic fields such as location, date or status. === Structured fields === === Advantages === Data mining allows study of filing patterns of competitors and locates main patent filers within a specific area of technology. This approach can be helpful to monitor competitors' environments, moves and innovation trends and gives a macro view of a technology status. == Text-mining == === Principle === Text mining is used to search through unstructured text documents. This technique is widely used on the Internet, it has had success in bioinformatics and now in the intellectual property environment. Text mining is based on a statistical analysis of word recurrence in a corpus. An algorithm extracts words and expressions from title, summary and claims and gathers them by declension. "And" and "if" are labeled as non-information bearing words and are stored in the stopword list. Stoplists can be specialised in order to create an accurate analysis. Next, the algorithm ranks the words by weight, according to their frequency in the patent's corpus and the document frequency containing this word. The score for each word is calculated using a formula such as: W e i g h t = T e r m F r e q u e n c y D o c u m e n t F r e q u e n c y = F r e q u e n c y o f t h e w o r d o r e x p r e s s i o n i n t h e T e x t S e a N u m b e r o f d o c u m e n t s c o n t a i n i n g t h e e x p r e s s i o n o r w o r d {\displaystyle Weight={\frac {Term\ Frequency}{Document\ Frequency}}={\frac {Frequency\ of\ the\ word\ or\ expression\ in\ the\ Text\ Sea}{Number\ of\ documents\ containing\ the\ expression\ or\ word}}} A frequently used word in several documents has less weight than a word used frequently in a few patents. Words under a minimum weight are eliminated, leaving a list of pertinent words or descriptors. Each patent is associated to the descriptors found in the selected document. Further, in the process of clusterisation, these descriptors are used as subsets, in which the patent are regrouped or as tags to place the patents in predetermined categories, for example keywords from International Patent Classifications. Four text parts can be processed with text-mining : Title Abstract Claim Patent Full-Text Software offer different combinations but title, abstract and claim are generally the most used, providing a good balance between interferences and relevancy. === Advantages === Text-mining can be used to narrow a search or quickly evaluate a patent corpus. For instance, if a query produces irrelevant documents, a multi-level clustering hierarchy identifies them in order to delete them and refine the search. Text-mining can also be used to create internal taxonomies specific to a corpus for possible mapping. == Visualisations == Allying patent analysis and informatic tools offers an overview of the environment through value-added visualisations. As patents contain structured and unstructured information, visualisations fall in two categories. Structured data can be rendered with data mining in macrothematic maps and statistical analysis. Unstructured information can be shown in like clouds, cluster maps and 2D keyword maps. === Data mining visualisation === === Text mining visualisation === === Visualisation for both data-mining and text-mining === Mapping visualisations can be used for both text-mining and data-mining results. == Uses == What patent visualisation can highlight: Competitors Partners New innovations Technologic environment description Networks Field application: R&D strategy management Competitive intelligence Licensing Strategy

  Read more →