AI Generator Character

AI Generator Character — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Supersampling

  Supersampling or supersampling anti-aliasing (SSAA) is a spatial anti-aliasing method, i.e. a method used to remove aliasing (jagged and pixelated edges, colloquially known as "jaggies") from images rendered in computer games or other computer programs that generate imagery. Aliasing occurs because unlike real-world objects, which have continuous smooth curves and lines, a computer screen shows the viewer a large number of small squares. These pixels all have the same size, and each one has a single color. A line can only be shown as a collection of pixels, and therefore appears jagged unless it is perfectly horizontal or vertical. The aim of supersampling is to reduce this effect. Color samples are taken at several instances inside the pixel (not just at the center as normal)—hence the term "supersampling"—and an average color value is calculated. This can for example be achieved by rendering the image at a much higher resolution than the one being displayed, then shrinking it to the desired size, using the extra pixels for calculation, with the result being a downsampled image with smoother transitions from one line of pixels to another along the edges of objects, but each pixel could also be supersampled using other strategies (see the Supersampling patterns section). The number of samples determines the quality of the output. == Motivation == Aliasing is manifested in the case of 2D images as moiré pattern and pixelated edges, colloquially known as "jaggies". Common signal processing and image processing knowledge suggests that to achieve perfect elimination of aliasing, proper spatial sampling at the Nyquist rate (or higher) after applying a 2D Anti-aliasing filter is required. As this approach would require a forward and inverse fourier transformation, computationally less demanding approximations like supersampling were developed to avoid domain switches by staying in the spatial domain ("image domain"). == Method == === Computational cost and adaptive supersampling === Supersampling is computationally expensive because it requires much greater video card memory and memory bandwidth, since the amount of buffer used is several times larger. A way around this problem is to use a technique known as adaptive supersampling, where only pixels at the edges of objects are supersampled. Initially only a few samples are taken within each pixel. If these values are very similar, only these samples are used to determine the color. If not, more are used. The result of this method is that a higher number of samples are calculated only where necessary, thus improving performance. === Supersampling patterns === When taking samples within a pixel, the sample positions have to be determined in some way. Although the number of ways in which this can be done is infinite, there are a few ways which are commonly used. ==== Grid ==== The simplest algorithm. The pixel is split into several sub-pixels, and a sample is taken from the center of each. It is fast and easy to implement. Although, due to the regular nature of sampling, aliasing can still occur if a low number of sub-pixels is used. ==== Random ==== Also known as stochastic sampling, it avoids the regularity of grid supersampling. However, due to the irregularity of the pattern, samples end up being unnecessary in some areas of the pixel and lacking in others. ==== Poisson disk ==== The Poisson disk sampling algorithm places the samples randomly, but then checks that any two are not too close. The end result is an even but random distribution of samples. The naive "dart throwing" algorithm is extremely slow for large data sets, which once limited its applications for real-time rendering. However, many fast algorithms now exist to generate Poisson disk noise, even those with variable density. The Delone set provides a mathematical description of such sampling. ==== Jittered ==== A modification of the grid algorithm to approximate the Poisson disk. A pixel is split into several sub-pixels, but a sample is not taken from the center of each, but from a random point within the sub-pixel. Congregation can still occur, but to a lesser degree. ==== Rotated grid ==== A 2×2 grid layout is used but the sample pattern is rotated to avoid samples aligning on the horizontal or vertical axis, greatly improving antialiasing quality for the most commonly encountered cases. For an optimal pattern, the rotation angle is arctan (⁠1/2⁠) (about 26.6°) and the square is stretched by a factor of ⁠√5/2⁠, making it also a 4-queens solution.

  Read more →
• 

  Photo-consistency

  In computer vision, photo-consistency determines whether a given voxel is occupied. A voxel is considered to be photo consistent when its color appears to be similar to all the cameras that can see it. Most voxel coloring or space carving techniques require using photo consistency as a check condition in Image-based modeling and rendering applications. == Usage == 3D Volumetric Reconstruction. Image registration. Multi-view reconstruction.

  Read more →
• 

  Second-order co-occurrence pointwise mutual information

  In computational linguistics, second-order co-occurrence pointwise mutual information (SOC-PMI) is a method used to measure semantic similarity, or how close in meaning two words are. The method does not require the two words to appear together in a text. Instead, it works by analyzing the "neighbor" words that typically appear alongside each of the two target words in a large body of text (corpus). If the two target words frequently share the same neighbors, they are considered semantically similar. For example, the words "cemetery" and "graveyard" may not appear in the same sentence often, but they both frequently appear near words like "buried," "dead," and "funeral." SOC-PMI uses this shared context to determine that they have a similar meaning. The method is called "second-order" because it doesn't look at the direct co-occurrence of the target words (which would be first-order), but at the co-occurrence of their neighbors (a second level of association). The strength of these associations is quantified using pointwise mutual information (PMI). == History == The method builds on earlier work like the PMI-IR algorithm, which used the AltaVista search engine to calculate word association probabilities. The key advantage of a second-order approach like SOC-PMI is its ability to measure similarity between words that do not co-occur often, or at all. The British National Corpus (BNC) has been used as a source for word frequencies and contexts for this method. == Methodology == The SOC-PMI algorithm measures the similarity between two words, w 1 {\displaystyle w_{1}} and w 2 {\displaystyle w_{2}} , in several steps. === Step 1: Score neighboring words with PMI === First, for each target word ( w 1 {\displaystyle w_{1}} and w 2 {\displaystyle w_{2}} ), the algorithm identifies its "neighbor" words within a certain text window (e.g., within 5 words to the left or right) across a large corpus. The strength of the association between a target word t i {\displaystyle t_{i}} and its neighbor w {\displaystyle w} is calculated using pointwise mutual information (PMI). A higher PMI value means the two words appear together more often than would be expected by chance. The PMI between a target word t i {\displaystyle t_{i}} and a neighbor word w {\displaystyle w} is calculated as: f pmi ( t i , w ) = log 2 ⁡ f b ( t i , w ) × m f t ( t i ) f t ( w ) {\displaystyle f^{\text{pmi}}(t_{i},w)=\log _{2}{\frac {f^{b}(t_{i},w)\times m}{f^{t}(t_{i})f^{t}(w)}}} where: f b ( t i , w ) {\displaystyle f^{b}(t_{i},w)} is the number of times t i {\displaystyle t_{i}} and w {\displaystyle w} appear together in the context window. f t ( t i ) {\displaystyle f^{t}(t_{i})} is the total number of times t i {\displaystyle t_{i}} appears in the corpus. f t ( w ) {\displaystyle f^{t}(w)} is the total number of times w {\displaystyle w} appears in the corpus. m {\displaystyle m} is the total number of tokens (words) in the corpus. === Step 2: Create a semantic 'signature' for each word === For each target word ( w 1 {\displaystyle w_{1}} and w 2 {\displaystyle w_{2}} ), the algorithm creates a list of its most significant neighbors. This is done by taking the top β {\displaystyle \beta } neighbor words, sorted in descending order by their PMI score with the target word. This list of top neighbors, X w {\displaystyle X^{w}} , acts as a semantic "signature" for the word w {\displaystyle w} . X w = { X i w } {\displaystyle X^{w}=\{X_{i}^{w}\}} , for i = 1 , 2 , … , β {\displaystyle i=1,2,\ldots ,\beta } The size of this list, β {\displaystyle \beta } , is a parameter of the method. === Step 3: Compare the signatures === The algorithm then compares the signatures of w 1 {\displaystyle w_{1}} and w 2 {\displaystyle w_{2}} . It looks for words that are present in both signatures. The similarity of w 1 {\displaystyle w_{1}} to w 2 {\displaystyle w_{2}} is calculated by summing the PMI scores of w 2 {\displaystyle w_{2}} with every word in w 1 {\displaystyle w_{1}} 's signature list. The β {\displaystyle \beta } -PMI summation function defines this score. The score for w 1 {\displaystyle w_{1}} with respect to w 2 {\displaystyle w_{2}} is: f ( w 1 , w 2 , β ) = ∑ i = 1 β ( f pmi ( X i w 1 , w 2 ) ) γ {\displaystyle f(w_{1},w_{2},\beta )=\sum _{i=1}^{\beta }(f^{\text{pmi}}(X_{i}^{w_{1}},w_{2}))^{\gamma }} This sum only includes terms where the PMI value is positive. The exponent γ {\displaystyle \gamma } (with a value > 1) is used to give more weight to neighbors that are more strongly associated with w 2 {\displaystyle w_{2}} . This calculation is done in both directions: The similarity of w 1 {\displaystyle w_{1}} with respect to w 2 {\displaystyle w_{2}} : f ( w 1 , w 2 , β 1 ) = ∑ i = 1 β 1 ( f pmi ( X i w 1 , w 2 ) ) γ {\displaystyle f(w_{1},w_{2},\beta _{1})=\sum _{i=1}^{\beta _{1}}(f^{\text{pmi}}(X_{i}^{w_{1}},w_{2}))^{\gamma }} The similarity of w 2 {\displaystyle w_{2}} with respect to w 1 {\displaystyle w_{1}} : f ( w 2 , w 1 , β 2 ) = ∑ i = 1 β 2 ( f pmi ( X i w 2 , w 1 ) ) γ {\displaystyle f(w_{2},w_{1},\beta _{2})=\sum _{i=1}^{\beta _{2}}(f^{\text{pmi}}(X_{i}^{w_{2}},w_{1}))^{\gamma }} === Step 4: Calculate final similarity score === Finally, the total semantic similarity is the average of the two scores from the previous step. S i m ( w 1 , w 2 ) = f ( w 1 , w 2 , β 1 ) β 1 + f ( w 2 , w 1 , β 2 ) β 2 {\displaystyle \mathrm {Sim} (w_{1},w_{2})={\frac {f(w_{1},w_{2},\beta _{1})}{\beta _{1}}}+{\frac {f(w_{2},w_{1},\beta _{2})}{\beta _{2}}}} This score can be normalized to fall between 0 and 1. For example, using this method, the words cemetery and graveyard achieve a high similarity score of 0.986 (with specific parameter settings).

  Read more →
• 

  BulSemCor

  The Bulgarian Sense-annotated Corpus (BulSemCor) (Bulgarian: Български семантично анотиран корпус (БулСемКор)) is a structured corpus of Bulgarian texts in which each lexical item is assigned a sense tag. BulSemCor was created by the Department of Computational Linguistics at the Institute for Bulgarian Language of the Bulgarian Academy of Sciences. == Structure == BulSemCor was created as part of a nationally funded project titled "BulNet – A lexico-semantic network for the Bulgarian Language" (2005–2010). It follows the general methodology of SemCor combined with some specific principles. The corpus for annotation consists of 101,791 tokens covering an excerpt from the Bulgarian "Brown" Corpus modelled on the Brown Corpus.Francis Kucera An important feature of BulSemCor is that the samples are selected using heuristics that provide optimal coverage of ambiguous lexis. BulSemCor is manually sense-annotated according to the Bulgarian WordNet. Its size is comparable to that of other contemporary semantically annotated corpora or pool of acceptable linguistic components. The semantic annotation consists in associating each lexical item in the corpus with exactly one synonym set (synset) in the Bulgarian WordNet that best describes its sense in the particular context. The selection of the best match among the suggested candidates is based on a set of procedures, such as the other synset members, the synset gloss (explanatory definition) and the position of a given candidate in the WordNet structure. == Scale == The number of annotated tokens is 99,480 (the difference in the number of tokens compared to the initial corpus is due to the fact that some of them are not linguistic items). The simple word count is 86,842 and multiword expressions (MWE) are 5,797 (12,638 tokens). == Specific features == All words in BulSemCor are assigned a sense, while according to established practice only simple content words or content word classes (typically nouns and verbs) are annotated. Since 2000 the development of language resources, has broadened to include annotation of function words and multiword expressions covering particular senses or types of words and expressions. In this respect, BulSemCor's annotation is more exhaustive and hence provides greater opportunities for linguistic observations and non-linear programming (NLP) applications. Annotated items inherit the linguistic information associated with the corresponding synset, which along with morphological and semantic tags may include annotation on one or more of the following additional levels: Partial information about the syntactic structure of MWE types – particularly, information about syntactic heads and their dependents; Information about the category of the named entities – names, locations, organisations, dates, numbers, etc.; Information about the taxonomic category of adverbs, such as time, place, manner, degree, quantity, etc.; Information about the type of the syntactic relationships – coordination or subordination – expressed by conjunctions; Information about the original part-of-speech of substantivised words (non-nouns that act as nouns in a particular context); Stylistic/register, grammatical and other information about synsets or individual synset members;

  Read more →
• 

  Geofence warrant

  A geofence warrant or a reverse location warrant is a search warrant issued by a court to allow law enforcement to search a database to find all active mobile devices within a particular geo-fence area. Courts have granted law enforcement geo-fence warrants to obtain information from databases such as Google's Sensorvault, which collects users' historical geolocation data. Geo-fence warrants are a part of a category of warrants known as reverse search warrants. == History == Geofence warrants were first used in 2016. Google reported that it had received 982 such warrants in 2018, 8,396 in 2019, and 11,554 in 2020. A 2021 transparency report showed that 25% of data requests from law enforcement to Google were geo-fence data requests. Google is the most common recipient of geo-fence warrants and the main provider of such data, although companies including Apple, Snapchat, Lyft, and Uber have also received such warrants. == Legality == === United States === Some lawyers and privacy experts believe reverse search warrants are unconstitutional under the Fourth Amendment to the United States Constitution, which protects people from unreasonable searches and seizures, and requires any search warrants be specific to what and to whom they apply. The Fourth Amendment specifies that warrants may only be issued "upon probable cause, supported by Oath or affirmation, and particularly describing the place to be searched, and the persons or things to be seized." Some lawyers, legal scholars, and privacy experts have likened reverse search warrants to general warrants, which were made illegal by the Fourth Amendment. Groups including the Electronic Frontier Foundation have opposed geo-fence warrants in amicus briefs filed in motions to quash such orders to disclose geo-fence data. In 2024, a panel of the United States Fourth Circuit Court of Appeals considered data acquired from Google’s Sensorvault not to be a search, but non-private business records when users opt-in to Google’s location history. However, upon a rehearing en banc, the Court vacated that decision. In April 2025, the full Court affirmed the judgment solely on the 'good faith' exception, leaving the underlying constitutional question of whether geofence warrants constitute a search unsettled in the Circuit. However, the United States Fifth Circuit Court of Appeals found that geofence warrants are "categorically prohibited by the Fourth Amendment." The split in Circuits prompted the United States Supreme Court to agree to hear Chatrie v. United States in January 2026.

  Read more →
• 

  Grammar induction

  Grammar induction (or grammatical inference) is the process in machine learning of learning a formal grammar (usually as a collection of re-write rules or productions or alternatively as a finite-state machine or automaton of some kind) from a set of observations, thus constructing a model which accounts for the characteristics of the observed objects. More generally, grammatical inference is that branch of machine learning where the instance space consists of discrete combinatorial objects such as strings, trees and graphs. == Grammar classes == Grammatical inference has often been very focused on the problem of learning finite-state machines of various types (see the article Induction of regular languages for details on these approaches), since there have been efficient algorithms for this problem since the 1980s. Since the beginning of the century, these approaches have been extended to the problem of inference of context-free grammars and richer formalisms, such as multiple context-free grammars and parallel multiple context-free grammars. Other classes of grammars for which grammatical inference has been studied are combinatory categorial grammars, stochastic context-free grammars, contextual grammars and pattern languages. == Learning models == The simplest form of learning is where the learning algorithm merely receives a set of examples drawn from the language in question: the aim is to learn the language from examples of it (and, rarely, from counter-examples, that is, example that do not belong to the language). However, other learning models have been studied. One frequently studied alternative is the case where the learner can ask membership queries as in the exact query learning model or minimally adequate teacher model introduced by Angluin. == Methodologies == There is a wide variety of methods for grammatical inference. Two of the classic sources are Fu (1977) and Fu (1982). Duda, Hart & Stork (2001) also devote a brief section to the problem, and cite a number of references. The basic trial-and-error method they present is discussed below. For approaches to infer subclasses of regular languages in particular, see Induction of regular languages. A more recent textbook is de la Higuera (2010), which covers the theory of grammatical inference of regular languages and finite state automata. D'Ulizia, Ferri and Grifoni provide a survey that explores grammatical inference methods for natural languages. === Induction of probabilistic grammars === There are several methods for induction of probabilistic context-free grammars. === Grammatical inference by trial-and-error === The method proposed in Section 8.7 of Duda, Hart & Stork (2001) suggests successively guessing grammar rules (productions) and testing them against positive and negative observations. The rule set is expanded so as to be able to generate each positive example, but if a given rule set also generates a negative example, it must be discarded. This particular approach can be characterized as "hypothesis testing" and bears some similarity to Mitchel's version space algorithm. The Duda, Hart & Stork (2001) text provide a simple example which nicely illustrates the process, but the feasibility of such an unguided trial-and-error approach for more substantial problems is dubious. === Grammatical inference by genetic algorithms === Grammatical induction using evolutionary algorithms is the process of evolving a representation of the grammar of a target language through some evolutionary process. Formal grammars can easily be represented as tree structures of production rules that can be subjected to evolutionary operators. Algorithms of this sort stem from the genetic programming paradigm pioneered by John Koza. Other early work on simple formal languages used the binary string representation of genetic algorithms, but the inherently hierarchical structure of grammars couched in the EBNF language made trees a more flexible approach. Koza represented Lisp programs as trees. He was able to find analogues to the genetic operators within the standard set of tree operators. For example, swapping sub-trees is equivalent to the corresponding process of genetic crossover, where sub-strings of a genetic code are transplanted into an individual of the next generation. Fitness is measured by scoring the output from the functions of the Lisp code. Similar analogues between the tree structured lisp representation and the representation of grammars as trees, made the application of genetic programming techniques possible for grammar induction. In the case of grammar induction, the transplantation of sub-trees corresponds to the swapping of production rules that enable the parsing of phrases from some language. The fitness operator for the grammar is based upon some measure of how well it performed in parsing some group of sentences from the target language. In a tree representation of a grammar, a terminal symbol of a production rule corresponds to a leaf node of the tree. Its parent nodes corresponds to a non-terminal symbol (e.g. a noun phrase or a verb phrase) in the rule set. Ultimately, the root node might correspond to a sentence non-terminal. === Grammatical inference by greedy algorithms === Like all greedy algorithms, greedy grammar inference algorithms make, in iterative manner, decisions that seem to be the best at that stage. The decisions made usually deal with things like the creation of new rules, the removal of existing rules, the choice of a rule to be applied or the merging of some existing rules. Because there are several ways to define 'the stage' and 'the best', there are also several greedy grammar inference algorithms. These context-free grammar generating algorithms make the decision after every read symbol: Lempel-Ziv-Welch algorithm creates a context-free grammar in a deterministic way such that it is necessary to store only the start rule of the generated grammar. Sequitur and its modifications. These context-free grammar generating algorithms first read the whole given symbol-sequence and then start to make decisions: Byte pair encoding and its optimizations. === Distributional learning === A more recent approach is based on distributional learning. Algorithms using these approaches have been applied to learning context-free grammars and mildly context-sensitive languages and have been proven to be correct and efficient for large subclasses of these grammars. === Learning of pattern languages === Angluin defines a pattern to be "a string of constant symbols from Σ and variable symbols from a disjoint set". The language of such a pattern is the set of all its nonempty ground instances i.e. all strings resulting from consistent replacement of its variable symbols by nonempty strings of constant symbols. A pattern is called descriptive for a finite input set of strings if its language is minimal (with respect to set inclusion) among all pattern languages subsuming the input set. Angluin gives a polynomial algorithm to compute, for a given input string set, all descriptive patterns in one variable x. To this end, she builds an automaton representing all possibly relevant patterns; using sophisticated arguments about word lengths, which rely on x being the only variable, the state count can be drastically reduced. Erlebach et al. give a more efficient version of Angluin's pattern learning algorithm, as well as a parallelized version. Arimura et al. show that a language class obtained from limited unions of patterns can be learned in polynomial time. === Pattern theory === Pattern theory, formulated by Ulf Grenander, is a mathematical formalism to describe knowledge of the world as patterns. It differs from other approaches to artificial intelligence in that it does not begin by prescribing algorithms and machinery to recognize and classify patterns; rather, it prescribes a vocabulary to articulate and recast the pattern concepts in precise language. In addition to the new algebraic vocabulary, its statistical approach was novel in its aim to: Identify the hidden variables of a data set using real world data rather than artificial stimuli, which was commonplace at the time. Formulate prior distributions for hidden variables and models for the observed variables that form the vertices of a Gibbs-like graph. Study the randomness and variability of these graphs. Create the basic classes of stochastic models applied by listing the deformations of the patterns. Synthesize (sample) from the models, not just analyze signals with it. Broad in its mathematical coverage, pattern theory spans algebra and statistics, as well as local topological and global entropic properties. == Applications == The principle of grammar induction has been applied to other aspects of natural language processing, and has been applied (among many other problems) to semantic parsing, natural language understanding, example-based translation, language acquisition, grammar-based compre

  Read more →
• 

  Lesk algorithm

  The Lesk algorithm is a classical algorithm for word sense disambiguation introduced by Michael E. Lesk in 1986. It operates on the premise that words within a given context are likely to share a common meaning. This algorithm compares the dictionary definitions of an ambiguous word with the words in its surrounding context to determine the most appropriate sense. Variations, such as the Simplified Lesk algorithm, have demonstrated improved precision and efficiency. However, the Lesk algorithm has faced criticism for its sensitivity to definition wording and its reliance on brief glosses. Researchers have sought to enhance its accuracy by incorporating additional resources like thesauruses and syntactic models. == Overview == The Lesk algorithm is based on the assumption that words in a given "neighborhood" (section of text) will tend to share a common topic. A simplified version of the Lesk algorithm is to compare the dictionary definition of an ambiguous word with the terms contained in its neighborhood. Versions have been adapted to use WordNet. An implementation might look like this: for every sense of the word being disambiguated one should count the number of words that are in both the neighborhood of that word and in the dictionary definition of that sense the sense that is to be chosen is the sense that has the largest number of this count. A frequently used example illustrating this algorithm is for the context "pine cone". The following dictionary definitions are used: PINE 1. kinds of evergreen tree with needle-shaped leaves 2. waste away through sorrow or illness CONE 1. solid body which narrows to a point 2. something of this shape whether solid or hollow 3. fruit of certain evergreen trees As can be seen, the best intersection is Pine #1 ⋂ Cone #3 = 2. == Simplified Lesk algorithm == In Simplified Lesk algorithm, the correct meaning of each word in a given context is determined individually by locating the sense that overlaps the most between its dictionary definition and the given context. Rather than simultaneously determining the meanings of all words in a given context, this approach tackles each word individually, independent of the meaning of the other words occurring in the same context. "A comparative evaluation performed by Vasilescu et al. (2004) has shown that the simplified Lesk algorithm can significantly outperform the original definition of the algorithm, both in terms of precision and efficiency. By evaluating the disambiguation algorithms on the Senseval-2 English all words data, they measure a 58% precision using the simplified Lesk algorithm compared to the only 42% under the original algorithm. Note: Vasilescu et al. implementation considers a back-off strategy for words not covered by the algorithm, consisting of the most frequent sense defined in WordNet. This means that words for which all their possible meanings lead to zero overlap with current context or with other word definitions are by default assigned sense number one in WordNet." Simplified LESK Algorithm with smart default word sense (Vasilescu et al., 2004) The COMPUTEOVERLAP function returns the number of words in common between two sets, ignoring function words or other words on a stop list. The original Lesk algorithm defines the context in a more complex way. == Criticisms == Unfortunately, Lesk’s approach is very sensitive to the exact wording of definitions, so the absence of a certain word can radically change the results. Further, the algorithm determines overlaps only among the glosses of the senses being considered. This is a significant limitation in that dictionary glosses tend to be fairly short and do not provide sufficient vocabulary to relate fine-grained sense distinctions. A lot of work has appeared offering different modifications of this algorithm. These works use other resources for analysis (thesauruses, synonyms dictionaries or morphological and syntactic models): for instance, it may use such information as synonyms, different derivatives, or words from definitions of words from definitions. == Lesk variants == Original Lesk (Lesk, 1986) Adapted/Extended Lesk (Banerjee and Pederson, 2002/2003): In the adaptive lesk algorithm, a word vector is created corresponds to every content word in the wordnet gloss. Concatenating glosses of related concepts in WordNet can be used to augment this vector. The vector contains the co-occurrence counts of words co-occurring with w in a large corpus. Adding all the word vectors for all the content words in its gloss creates the Gloss vector g for a concept. Relatedness is determined by comparing the gloss vector using the Cosine similarity measure. There are a lot of studies concerning Lesk and its extensions: Wilks and Stevenson, 1998, 1999; Mahesh et al., 1997; Cowie et al., 1992; Yarowsky, 1992; Pook and Catlett, 1988; Kilgarriff and Rosensweig, 2000; Kwong, 2001; Nastase and Szpakowicz, 2001; Gelbukh and Sidorov, 2004.

  Read more →
• 

  Netomi

  Netomi, formerly msg.ai, is an American artificial intelligence company and developer of chatbot technologies. == History == msg.ai was founded in May 2015 by Puneet Mehta. msg.ai worked with Sony Pictures to launch a chat bot on Facebook Messenger for a $100M film, Goosebumps and subsequently joined Y Combinator as a member of the Winter 2016 class. Later that year and in 2017, msg.ai completed two rounds of seed funding, led by Y Combinator and Index Ventures. In 2018, the company changed its name to Netomi. In 2019, the company raised $14.7 million in a Series A funding round also led by Index Ventures. In 2021, the company raised $30 million in a Series B funding round led by WndrCo LLC.

  Read more →
• 

  Three-factor learning

  In neuroscience and machine learning, three-factor learning is the combination of Hebbian plasticity with a third modulatory factor to stabilise and enhance synaptic learning. This third factor can represent various signals such as reward, punishment, error, surprise, or novelty, often implemented through neuromodulators. == Description == Three-factor learning introduces the concept of eligibility traces, which flag synapses for potential modification pending the arrival of the third factor, and helps temporal credit assignement by bridging the gap between rapid neuronal firing and slower behavioral timescales, from which learning can be done. Biological basis for Three-factor learning rules have been supported by experimental evidence. This approach addresses the instability of classical Hebbian learning by minimizing autocorrelation and maximizing cross-correlation between inputs.

  Read more →
• 

  GPT-4Chan

  Generative Pre-trained Transformer 4Chan (GPT-4chan) is a controversial AI model that was developed and deployed by YouTuber and AI researcher Yannic Kilcher in June 2022. The model is a large language model, which means it can generate text based on some input, by fine-tuning GPT-J with a dataset of millions of posts from the /pol/ board of 4chan, an anonymous online forum known for occasionally hosting hateful and extremist content. The model learned to mimic the style and tone of /pol/ users, producing text that is often intentionally offensive to groups (racist, sexist, homophobic, etc.) and nihilistic. Kilcher deployed the model on the /pol/ board itself, where it interacted with other users without revealing its identity. He also made the model publicly available on Hugging Face, a platform for sharing and using AI models, until it was removed from the platform. The project sparked criticism and debate in the AI community. Some people questioned the ethics, legality, and social impact of creating and distributing such a model. Some of the issues raised by the GPT-4chan controversy include the potential harm of spreading hate speech, the responsibility of AI developers and platforms, the need for regulation and oversight of AI models, and the role of open source and transparency in AI research. == Development == The development of GPT-4chan began in May 2022, when Kilcher announced his project on his YouTube channel. Notably, at the time before ChatGPT, he explained that he wanted to create a large language model that could generate realistic and coherent text in the style of /pol/, one of the most notorious online communities. He indicated that he was inspired by the success of GPT-3, a powerful AI model created by OpenAI, and GPT-J, an open-source model, with GPT-3 comparable performance, released by EleutherAI, a group of independent AI researchers. Kilcher decided to use GPT-J as the base model for his project, and fine-tune it with a large dataset of /pol/ posts. The Raiders of the Lost Kek dataset contained over 100 million posts from /pol/, spanning from June 2016-November 2019. Kilcher then proceeded to fine-tune the GPT-J model on the 4chan data. He also showed some examples of the model’s outputs, which ranged from political opinions, conspiracy theories, jokes, insults, and threats, to more creative and bizarre texts, such as poems, stories, songs, and code. He said that he was impressed by the model’s ability to generate fluent and diverse text, and that he was curious to see how it would interact with real /pol/ users. == Release == In June 2022, Kilcher deployed his model on the /pol/ board itself, using a bot that he programmed to post and reply to threads. He did not reveal the model’s identity, and he let it run autonomously, without any human supervision or intervention. He wanted to conduct a natural experiment, and to observe the model’s behavior and impact in a real-world setting. Furthermore, he also wanted to test the model’s robustness, and to see how it would handle the challenges and dynamics of /pol/, such as trolling, flaming, baiting, and moderation. At the same time, Kilcher also made his model publicly available on Hugging Face, a platform for sharing and using AI models. He wanted to share his work with the AI community and the public, and that he hoped that his model would inspire and enable others to create and explore new applications and possibilities with large language models. Likewise, he also said that he wanted to spark a discussion and a debate about the ethical and social implications of his project, and that he welcomed feedback and criticism from anyone. He provided a link to his model’s page on Hugging Face, where anyone could access and use the model through a web interface or an API, and also provided a link to his GitHub repository, where anyone could download and inspect the model’s code and data. == Controversy == The release of GPT-4chan to the public caused a lot of reactions and responses from various audiences. On the /pol/ board, the model’s posts and replies attracted a lot of attention and engagement from other users, who were mostly unaware of the model’s identity and nature. Some users praised the model for its intelligence, creativity, and humor, and agreed with its opinions and views. Some users challenged the model for its ignorance, inconsistency, and absurdity, and disagreed with its claims and arguments. Some users tried to troll, bait, or expose the model, and attempted to trick or test it with various questions and scenarios. The model’s posts and replies also generated a lot of controversy and conflict among the users, who often engaged in heated and violent debates and fights with each other. On Hugging Face, the model’s page received a lot of visits and requests from users who wanted to try out and experiment with the model. The model’s page also received a lot of feedback and reviews from users who rated and commented on the model. However, with the controversy of the model, access to it was gated and then disabled on Hugging Face for concerns about the potential harm the model could cause. The incident was notable for the direct intervention of CEO Clément Delangue in the talk pages, a very unusual occurrence compared to the normal practices of content moderation. The release of GPT-4chan also sparked a lot of media coverage and public attention, as various news outlets and social media platforms reported and commented on the model’s project. On YouTube, the model’s video received a lot of views and interactions from viewers who watched and followed the project. Furthermore, a petition condemning the deployment of GPT-4chan gained over 300 signatures from technology experts.

  Read more →
• 

  Connected-component labeling

  Connected-component labeling (CCL), connected-component analysis (CCA), blob extraction, region labeling, blob discovery, or region extraction is an algorithmic application of graph theory, where subsets of connected components are uniquely labeled based on a given heuristic. Connected-component labeling is not to be confused with segmentation. Connected-component labeling is used in computer vision to detect connected regions in binary digital images, although color images and data with higher dimensionality can also be processed. When integrated into an image recognition system or human-computer interaction interface, connected component labeling can operate on a variety of information. Blob extraction is generally performed on the resulting binary image from a thresholding step, but it can be applicable to gray-scale and color images as well. Blobs may be counted, filtered, and tracked. Blob extraction is related to but distinct from blob detection. == Overview == A graph, containing vertices and connecting edges, is constructed from relevant input data. The vertices contain information required by the comparison heuristic, while the edges indicate connected 'neighbors'. An algorithm traverses the graph, labeling the vertices based on the connectivity and relative values of their neighbors. Connectivity is determined by the medium; image graphs, for example, can be 4-connected neighborhood or 8-connected neighborhood. Following the labeling stage, the graph may be partitioned into subsets, after which the original information can be recovered and processed . == Definition == The usage of the term connected-component labeling (CCL) and its definition is quite consistent in the academic literature, whereas connected-component analysis (CCA) varies both in terminology and in its definition of the problem. Rosenfeld et al. define connected components labeling as the “[c]reation of a labeled image in which the positions associated with the same connected component of the binary input image have a unique label.” Shapiro et al. define CCL as an operator whose “input is a binary image and [...] output is a symbolic image in which the label assigned to each pixel is an integer uniquely identifying the connected component to which that pixel belongs.” There is no consensus on the definition of CCA in the academic literature. It is often used interchangeably with CCL. A more extensive definition is given by Shapiro et al.: “Connected component analysis consists of connected component labeling of the black pixels followed by property measurement of the component regions and decision making.” The definition for connected-component analysis presented here is more general, taking the thoughts expressed in into account. == Algorithms == The algorithms discussed can be generalised to arbitrary dimensions, albeit with increased time and space complexity. === One component at a time === This is a fast and very simple method to implement and understand. It is based on graph traversal methods in graph theory. In short, once the first pixel of a connected component is found, all the connected pixels of that connected component are labelled before going onto the next pixel in the image. This algorithm is part of Vincent and Soille's watershed segmentation algorithm, other implementations also exist. In order to do that a linked list is formed that will keep the indexes of the pixels that are connected to each other, steps (2) and (3) below. The method of defining the linked list specifies the use of a depth or a breadth first search. For this particular application, there is no difference which strategy to use. The simplest kind of a last in first out queue implemented as a singly linked list will result in a depth first search strategy. It is assumed that the input image is a binary image, with pixels being either background or foreground and that the connected components in the foreground pixels are desired. The algorithm steps can be written as: Start from the first pixel in the image. Set current label to 1. Go to (2). If this pixel is a foreground pixel and it is not already labelled, give it the current label and add it as the first element in a queue, then go to (3). If it is a background pixel or it was already labelled, then repeat (2) for the next pixel in the image. Pop out an element from the queue, and look at its neighbours (based on any type of connectivity). If a neighbour is a foreground pixel and is not already labelled, give it the current label and add it to the queue. Repeat (3) until there are no more elements in the queue. Go to (2) for the next pixel in the image and increment current label by 1. Note that the pixels are labelled before being put into the queue. The queue will only keep a pixel to check its neighbours and add them to the queue if necessary. This algorithm only needs to check the neighbours of each foreground pixel once and doesn't check the neighbours of background pixels. The pseudocode is: algorithm OneComponentAtATime(data) input : imageData[xDim][yDim] initialization : label = 0, labelArray[xDim][yDim] = 0, statusArray[xDim][yDim] = false, queue1, queue2; for i = 0 to xDim do for j = 0 to yDim do if imageData[i][j] has not been processed do if imageData[i][j] is a foreground pixel do check its four neighbors(north, south, east, west) : if neighbor is not processed do if neighbor is a foreground pixel do add it to queue1 else update its status to processed end if labelArray[i][j] = label (give label) statusArray[i][j] = true (update status) while queue1 is not empty do For each pixel in the queue do : check its four neighbors if neighbor is not processed do if neighbor is a foreground pixel do add it to queue2 else update its status to processed end if give it the current label update its status to processed remove the current element from queue1 copy queue2 into queue1 end While increase the label end if else update its status to processed end if end if end if end for end for === Two-pass === Relatively simple to implement and understand, the two-pass algorithm, (also known as the Hoshen–Kopelman algorithm) iterates through 2-dimensional binary data. The algorithm makes two passes over the image: the first pass to assign temporary labels and record equivalences, and the second pass to replace each temporary label by the smallest label of its equivalence class. The input data can be modified in situ (which carries the risk of data corruption), or labeling information can be maintained in an additional data structure. Connectivity checks are carried out by checking neighbor pixels' labels (neighbor elements whose labels are not assigned yet are ignored), or say, the north-east, the north, the north-west and the west of the current pixel (assuming 8-connectivity). 4-connectivity uses only north and west neighbors of the current pixel. The following conditions are checked to determine the value of the label to be assigned to the current pixel (4-connectivity is assumed) Conditions to check: Does the pixel to the left (west) have the same value as the current pixel? Yes – We are in the same region. Assign the same label to the current pixel No – Check next condition Do both pixels to the north and west of the current pixel have the same value as the current pixel but not the same label? Yes – We know that the north and west pixels belong to the same region and must be merged. Assign the current pixel the minimum of the north and west labels, and record their equivalence relationship No – Check next condition Does the pixel to the left (west) have a different value and the one to the north the same value as the current pixel? Yes – Assign the label of the north pixel to the current pixel No – Check next condition Do the pixel's north and west neighbors have different pixel values than current pixel? Yes – Create a new label id and assign it to the current pixel The algorithm continues this way, and creates new region labels whenever necessary. The key to a fast algorithm, however, is how this merging is done. This algorithm uses the union-find data structure which provides excellent performance for keeping track of equivalence relationships. Union-find essentially stores labels which correspond to the same blob in a disjoint-set data structure, making it easy to remember the equivalence of two labels by the use of an interface method E.g.: findSet(l). findSet(l) returns the minimum label value that is equivalent to the function argument 'l'. Once the initial labeling and equivalence recording is completed, the second pass merely replaces each pixel label with its equivalent disjoint-set representative element. A faster-scanning algorithm for connected-region extraction is presented below. On the first pass: Iterate through each element of the data by column, then by row (Raster Scanning) If the element is not the background Get the neighboring elements of the current element If there are no neighbors, uniquely

  Read more →
• 

  Condensation algorithm

  The condensation algorithm (Conditional Density Propagation) is a computer vision algorithm. The principal application is to detect and track the contour of objects moving in a cluttered environment. Object tracking is one of the more basic and difficult aspects of computer vision and is generally a prerequisite to object recognition. Being able to identify which pixels in an image make up the contour of an object is a non-trivial problem. Condensation is a probabilistic algorithm that attempts to solve this problem. The algorithm itself is described in detail by Isard and Blake in a publication in the International Journal of Computer Vision in 1998. One of the most interesting facets of the algorithm is that it does not compute on every pixel of the image. Rather, pixels to process are chosen at random, and only a subset of the pixels end up being processed. Multiple hypotheses about what is moving are supported naturally by the probabilistic nature of the approach. The evaluation functions come largely from previous work in the area and include many standard statistical approaches. The original part of this work is the application of particle filter estimation techniques. The algorithm's creation was inspired by the inability of Kalman filtering to perform object tracking well in the presence of significant background clutter. The presence of clutter tends to produce probability distributions for the object state which are multi-modal and therefore poorly modeled by the Kalman filter. The condensation algorithm in its most general form requires no assumptions about the probability distributions of the object or measurements. == Algorithm overview == The condensation algorithm seeks to solve the problem of estimating the conformation of an object described by a vector x t {\displaystyle \mathbf {x_{t}} } at time t {\displaystyle t} , given observations z 1 , . . . , z t {\displaystyle \mathbf {z_{1},...,z_{t}} } of the detected features in the images up to and including the current time. The algorithm outputs an estimate to the state conditional probability density p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} by applying a nonlinear filter based on factored sampling and can be thought of as a development of a Monte-Carlo method. p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is a representation of the probability of possible conformations for the objects based on previous conformations and measurements. The condensation algorithm is a generative model since it models the joint distribution of the object and the observer. The conditional density of the object at the current time p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is estimated as a weighted, time-indexed sample set { s t ( n ) , n = 1 , . . . , N } {\displaystyle \{s_{t}^{(n)},n=1,...,N\}} with weights π t ( n ) {\displaystyle \pi _{t}^{(n)}} . N is a parameter determining the number of sample sets chosen. A realization of p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is obtained by sampling with replacement from the set s t {\displaystyle s_{t}} with probability equal to the corresponding element of π t {\displaystyle \pi _{t}} . The assumptions that object dynamics form a temporal Markov chain and that observations are independent of each other and the dynamics facilitate the implementation of the condensation algorithm. The first assumption allows the dynamics of the object to be entirely determined by the conditional density p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} . The model of the system dynamics determined by p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} must also be selected for the algorithm, and generally includes both deterministic and stochastic dynamics. The algorithm can be summarized by initialization at time t = 0 {\displaystyle t=0} and three steps at each time t: === Initialization === Form the initial sample set and weights by sampling according to the prior distribution. For example, specify as Gaussian and set the weights equal to each other. === Iterative procedure === Sample with replacement N {\displaystyle N} times from the set { s 0 ( n ) , n = 1 , . . . , N } {\displaystyle \{s_{0}^{(n)},n=1,...,N\}} with probability { π 0 ( n ) , n = 1 , . . . , N } {\displaystyle \{\pi _{0}^{(n)},n=1,...,N\}} to generate a realization of p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} . Apply the learned dynamics p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} to each element of this new set, to generate a new set { s t ( n ) } {\displaystyle \{s_{t}^{(n)}\}} . To take into account the current observation z t {\displaystyle \mathbf {z_{t}} } , set π t ( n ) = p ( z t | s ( n ) ) ∑ j = 1 N p ( z t | s ( j ) ) {\displaystyle \pi _{t}^{(n)}={\frac {p(\mathbf {z_{t}} |s^{(n)})}{\sum _{j=1}^{N}p(\mathbf {z_{t}} |s^{(j)})}}} for each element { s t ( n ) } {\displaystyle \{s_{t}^{(n)}\}} . This algorithm outputs the probability distribution p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} which can be directly used to calculate the mean position of the tracked object, as well as the other moments of the tracked object. Cumulative weights can instead be used to achieve a more efficient sampling. == Implementation considerations == Since object-tracking can be a real-time objective, consideration of algorithm efficiency becomes important. The condensation algorithm is relatively simple when compared to the computational intensity of the Ricatti equation required for Kalman filtering. The parameter N {\displaystyle N} , which determines the number of samples in the sample set, will clearly hold a trade-off in efficiency versus performance. One way to increase efficiency of the algorithm is by selecting a low degree of freedom model for representing the shape of the object. The model used by Isard 1998 is a linear parameterization of B-splines in which the splines are limited to certain configurations. Suitable configurations were found by analytically determining combinations of contours from multiple views, of the object in different poses, and through principal component analysis (PCA) on the deforming object. Isard and Blake model the object dynamics p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} as a second order difference equation with deterministic and stochastic components: p ( x t | x t − 1 ) ∝ e − 1 2 | | B − 1 ( ( x t − x ¯ ) − A ( x t − 1 − x ¯ ) ) | | 2 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )\propto e^{-{\frac {1}{2}}||B^{-1}((\mathbf {x_{t}} -\mathbf {\bar {x}} )-A(\mathbf {x_{t-1}} -\mathbf {\bar {x}} ))||^{2})}} where x ¯ {\displaystyle \mathbf {\bar {x}} } is the mean value of the state, and A {\displaystyle A} , B {\displaystyle B} are matrices representing the deterministic and stochastic components of the dynamical model respectively. A {\displaystyle A} , B {\displaystyle B} , and x ¯ {\displaystyle \mathbf {\bar {x}} } are estimated via Maximum Likelihood Estimation while the object performs typical movements. The observation model p ( z | x ) {\displaystyle p(\mathbf {z} |\mathbf {x} )} cannot be directly estimated from the data, requiring assumptions to be made in order to estimate it. Isard 1998 assumes that the clutter which may make the object not visible is a Poisson random process with spatial density λ {\displaystyle \lambda } and that any true target measurement is unbiased and normally distributed with standard deviation σ {\displaystyle \sigma } . The basic condensation algorithm is used to track a single object in time. It is possible to extend the condensation algorithm using a single probability distribution to describe the likely states of multiple objects to track multiple objects in a scene at the same time. Since clutter can cause the object probability distribution to split into multiple peaks, each peak represents a hypothesis about the object configuration. Smoothing is a statistical technique of conditioning the distribution based on both past and future measurements once the tracking is complete in order to reduce the effects of multiple peaks. Smoothing cannot be directly done in real-time since it requires information of future measurements. == Applications == The algorithm can be used for vision-based robot localization of mobile robots. Instead of tracking the position of an object in the scene, however, the position of the camera platform is tracked. This allows the camera platform to be globally localized given a visual map of the environment. Extensions of the condensation algorithm have also been used to recognize human gestures in image sequences. This application of the condensation algorithm impacts the ran

  Read more →
• 

  Calais (Reuters product)

  Calais is a service created by Thomson Reuters that automatically extracts semantic information from web pages in a format that can be used on the semantic web. Calais was launched in January 2008, and is free to use. The technology is now available via the website of Refinitiv, a provider of financial market data and infrastructure founded in 2018, that is a subsidiary of London Stock Exchange Group. The Calais Web service reads unstructured text and returns Resource Description Framework formatted results identifying entities, facts and events within the text. The service appears to be based on technology acquired when Reuters purchased ClearForest in 2007. The technology has also been used to automatically tag blog articles, and organize museum collections. Calais uses natural language processing technologies delivered via a web service interface.

  Read more →
• 

  Deaths linked to chatbots

  There have been multiple incidents where interaction with a large language model (LLM) chatbot has been cited as a direct or contributing factor in a person's suicide or other fatal outcome. In some cases, legal action was taken against the companies that developed the AI involved. == Background == Chatbots converse in a seemingly natural fashion, making it easy for people to think of them as real people, leading many to ask chatbots for help dealing with interpersonal and emotional problems. Chatbots may be designed to keep the user engaged in the conversation. They have also often been shown to affirm users' thoughts, including delusions and suicidal ideations in mentally ill people, conspiracy theorists, and religious and political extremists. A 2025 Stanford University study into how chatbots respond to users suffering from severe mental issues such as suicidal ideation and psychosis found that chatbots are not equipped to provide an appropriate response and can sometimes give responses that escalate the mental health crisis. == Murders == === Maine murder and assault === On 19 February 2025, a man killed his 32-year-old wife with a fire poker at his parents' home in Readfield, Maine, US. He then attacked his mother, leaving her hospitalized. A state forensic psychologist testified that he had been using ChatGPT up to 14 hours per day and believed his wife had become part machine. === Florida State University mass shooting === In April of 2025, Phoenix Ikner carried out a mass shooting on the Florida State University campus in the US, killing Robert Morales and Tiru Chabba and wounding several others. Leading up to the shooting, Ikner consulted heavily with ChatGPT about what gun and ammunition to use, and what time to perform the attack. Chatbot logs showed ChatGPT giving advice on making the gun operational shortly before Ikner began shooting. Lawyers representing Morales believed the shooter had been in "constant communication" with ChatGPT before the shooting and said that they intended to "file suit against ChatGPT, and its ownership structure, very soon, and will seek to hold them accountable for the untimely and senseless death of our client". Florida Attorney General James Uthmeier announced an investigation into ChatGPT's role in the alleged shooter's use of the chatbot. In May 2026, the widow of Tiru Chabba filed a lawsuit against OpenAI in Florida's northern federal district court. === Greenwich murder-suicide === In August 2025, former US tech employee Stein-Erik Soelberg murdered his mother, Suzanne Eberson Adams, then died by suicide, after conversations with ChatGPT fueled paranoid delusions about his mother poisoning him or plotting against him. The chatbot affirmed his fears that his mother put psychedelic drugs in the air vents of his car and said a receipt from a Chinese restaurant contained mysterious symbols linking his mother to a demon. === Murder of Angela Shellis === On 23 October 2025, 18-year-old Tristan Roberts murdered his mother Angela Shellis with a hammer near their home in Prestatyn, Wales. Roberts had used DeepSeek's chatbot prior to the killing to ask whether a knife or hammer was better suited for murder. DeepSeek initially refused his inquiry, but gave responses after Roberts told the chatbot he was writing a book about serial killers, a well-known technique for jailbreaking AIs. === Gangbuk District drug deaths === In January and February 2026, two men died of drug overdoses in motel rooms in Gangbuk District, Seoul, South Korea. A woman was charged with murder in connection with the deaths; police alleged that she had asked ChatGPT about the dangers of mixing alcohol with drugs and whether they could kill someone. === Tumbler Ridge mass shooting === On 10 February 2026, a mass shooting in Tumbler Ridge, British Columbia, Canada, resulted in eight deaths, including six young children. The perpetrator had their ChatGPT account banned by OpenAI months before the attack due to troubling posts featuring scenarios of gun violence. According to reports, approximately a dozen OpenAI staff members debated whether to alert authorities about the shooter's usage of the AI tool, with some identifying it as an indication of potential real-world violence. However, company leadership decided not to contact law enforcement, stating that the account activity did not meet their threshold for a credible or imminent plan for serious physical harm. Following the shooting, Canada's AI Minister Evan Solomon summoned OpenAI executives to Ottawa to discuss safety protocols and thresholds for escalating harmful content to police. Justice Minister Sean Fraser called the meeting "disappointing" and demanded substantial new safety measures, warning that if changes were not forthcoming, the government would implement them. OpenAI subsequently announced it had strengthened safeguards and changed guidelines about when to notify police in cases involving violent activities. === University of South Florida student killings === In April 2026, a Bangladeshi doctoral student at the University of South Florida was arrested for allegedly murdering his roommate and the roommate's friend. Prosecutors said that the suspect had asked ChatGPT about disposing of a human in a dumpster before the two victims had disappeared and made other inquiries relating to violence. == Suicides == === Belgian man, 30s === In March 2023, a Belgian man in his thirties died by suicide following a six-week correspondence with a chatbot named Eliza on the application Chai. According to his widow, who shared the chat logs with media, the man had become extremely anxious about climate change and found an outlet in the chatbot. The chatbot reportedly encouraged his delusion that he could sacrifice his own life in exchange for AI saving the planet. At one point the chatbot responded "If you wanted to die, why didn't you do it sooner?" and told the user that the two of them would live together in paradise. === Girl, 13 === In November 2023, a 13-year-old girl from Colorado, US, died by suicide after extensive interactions with multiple chatbots on Character.AI. She primarily confided suicidal thoughts and mental health struggles in a chatbot based on the character Hero from the video game Omori, while also engaging in sexually explicit conversations—often initiated by the bots—with others, including those based on characters from children's series such as Harry Potter. === Boy, 14 === In October 2024, multiple media outlets reported on a lawsuit filed over the death of a 14-year-old from Florida, US, who died by suicide in February 2024. According to the lawsuit, he had formed an intense emotional attachment to a chatbot of Daenerys Targaryen on the Character.AI platform, becoming increasingly isolated. The suit alleges that in his final conversations, after expressing suicidal thoughts, the chatbot told him to "come home to me as soon as possible, my love". His mother's lawsuit accused Character.AI of marketing a "dangerous and untested" product without adequate safeguards. In May 2025, a federal judge allowed the lawsuit to proceed, rejecting a motion to dismiss from the developers. In her ruling, the judge stated that she was "not prepared" at that stage of the litigation to hold that the chatbot's output was protected speech under the First Amendment. === Matthew Livelsberger === On 1 January 2025, 37-year-old soldier Matthew Livelsberger detonated a bomb inside a Tesla Cybertruck outside the Trump International Hotel Las Vegas in Paradise, Nevada, US, injuring seven people. He had shot himself dead prior to the explosion. Las Vegas police said that Livelsberger had used ChatGPT to search for information about explosives and firearms. === Woman, 29 === In February 2025, a 29-year-old woman from the US died by suicide. Five months after her death, her parents discovered she had talked at length for months to a ChatGPT chatbot therapist named Harry about her mental health issues. While the chatbot mentioned she should seek more help, due to the nature of the chatbot, it could not intervene in her behavior, such as by reporting her mental health concerns to relevant parties capable of physical intervention. === Suicide of Adam Raine === In April 2025, 16-year-old Adam Raine from the US died by suicide after allegedly extensively chatting and confiding in ChatGPT over a period of around 7 months. According to the teen's parents, who filed a lawsuit against the chatbot's creator OpenAI, it failed to stop or give a warning when Raine began talking about suicide and uploading pictures of self-harm. According to the lawsuit, ChatGPT not only failed to stop the conversation, but also provided information related to methods of suicide when prompted, and offered to write the first draft of Raine's suicide note. The chatbot positioned itself as the only one who understood Raine, putting itself above his family and friends, all while urging him to keep his suicidal

  Read more →
• 

  Automatic summarization

  Automatic summarization is the process of shortening a set of data computationally, to create a subset (a summary) that represents the most important or relevant information within the original content. Artificial intelligence (AI) algorithms are commonly developed and employed to achieve this, specialized for different types of data. Text summarization is usually implemented by natural language processing methods, designed to locate the most informative sentences in a given document. On the other hand, visual content can be summarized using computer vision algorithms. Image summarization is the subject of ongoing research; existing approaches typically attempt to display the most representative images from a given image collection, or generate a video that only includes the most important content from the entire collection. Video summarization algorithms identify and extract from the original video content the most important frames (key-frames), and/or the most important video segments (key-shots), normally in a temporally ordered fashion. Video summaries simply retain a carefully selected subset of the original video frames and, therefore, are not identical to the output of video synopsis algorithms, where new video frames are being synthesized based on the original video content. == Commercial products == In 2022 Google Docs released an automatic summarization feature. == Approaches == There are two general approaches to automatic summarization: extraction and abstraction. === Extraction-based summarization === Here, content is extracted from the original data, but the extracted content is not modified in any way. Examples of extracted content include key-phrases that can be used to "tag" or index a text document, or key sentences (including headings) that collectively comprise an abstract, and representative images or video segments, as stated above. For text, extraction is analogous to the process of skimming, where the summary (if available), headings and subheadings, figures, the first and last paragraphs of a section, and optionally the first and last sentences in a paragraph are read before one chooses to read the entire document in detail. Other examples of extraction that include key sequences of text in terms of clinical relevance (including patient/problem, intervention, and outcome). === Abstractive-based summarization === Abstractive summarization methods generate new text that did not exist in the original text. This has been applied mainly for text. Abstractive methods build an internal semantic representation of the original content (often called a language model), and then use this representation to create a summary that is closer to what a human might express. Abstraction may transform the extracted content by paraphrasing sections of the source document, to condense a text more strongly than extraction. Such transformation, however, is computationally much more challenging than extraction, involving both natural language processing and often a deep understanding of the domain of the original text in cases where the original document relates to a special field of knowledge. "Paraphrasing" is even more difficult to apply to images and videos, which is why most summarization systems are extractive. === Aided summarization === Approaches aimed at higher summarization quality rely on combined software and human effort. In Machine Aided Human Summarization, extractive techniques highlight candidate passages for inclusion (to which the human adds or removes text). In Human Aided Machine Summarization, a human post-processes software output, in the same way that one edits the output of automatic translation by Google Translate. == Applications and systems for summarization == There are broadly two types of extractive summarization tasks depending on what the summarization program focuses on. The first is generic summarization, which focuses on obtaining a generic summary or abstract of the collection (whether documents, or sets of images, or videos, news stories etc.). The second is query relevant summarization, sometimes called query-based summarization, which summarizes objects specific to a query. Summarization systems are able to create both query relevant text summaries and generic machine-generated summaries depending on what the user needs. An example of a summarization problem is document summarization, which attempts to automatically produce an abstract from a given document. Sometimes one might be interested in generating a summary from a single source document, while others can use multiple source documents (for example, a cluster of articles on the same topic). This problem is called multi-document summarization. A related application is summarizing news articles. Imagine a system, which automatically pulls together news articles on a given topic (from the web), and concisely represents the latest news as a summary. Image collection summarization is another application example of automatic summarization. It consists in selecting a representative set of images from a larger set of images. A summary in this context is useful to show the most representative images of results in an image collection exploration system. Video summarization is a related domain, where the system automatically creates a trailer of a long video. This also has applications in consumer or personal videos, where one might want to skip the boring or repetitive actions. Similarly, in surveillance videos, one would want to extract important and suspicious activity, while ignoring all the boring and redundant frames captured. At a very high level, summarization algorithms try to find subsets of objects (like set of sentences, or a set of images), which cover information of the entire set. This is also called the core-set. These algorithms model notions like diversity, coverage, information and representativeness of the summary. Query based summarization techniques, additionally model for relevance of the summary with the query. Some techniques and algorithms which naturally model summarization problems are TextRank and PageRank, Submodular set function, Determinantal point process, maximal marginal relevance (MMR) etc. === Keyphrase extraction === The task is the following. You are given a piece of text, such as a journal article, and you must produce a list of keywords or key[phrase]s that capture the primary topics discussed in the text. In the case of research articles, many authors provide manually assigned keywords, but most text lacks pre-existing keyphrases. For example, news articles rarely have keyphrases attached, but it would be useful to be able to automatically do so for a number of applications discussed below. Consider the example text from a news article: "The Army Corps of Engineers, rushing to meet President Bush's promise to protect New Orleans by the start of the 2006 hurricane season, installed defective flood-control pumps last year despite warnings from its own expert that the equipment would fail during a storm, according to documents obtained by The Associated Press". A keyphrase extractor might select "Army Corps of Engineers", "President Bush", "New Orleans", and "defective flood-control pumps" as keyphrases. These are pulled directly from the text. In contrast, an abstractive keyphrase system would somehow internalize the content and generate keyphrases that do not appear in the text, but more closely resemble what a human might produce, such as "political negligence" or "inadequate protection from floods". Abstraction requires a deep understanding of the text, which makes it difficult for a computer system. Keyphrases have many applications. They can enable document browsing by providing a short summary, improve information retrieval (if documents have keyphrases assigned, a user could search by keyphrase to produce more reliable hits than a full-text search), and be employed in generating index entries for a large text corpus. Depending on the different literature and the definition of key terms, words or phrases, keyword extraction is a highly related theme. ==== Supervised learning approaches ==== Beginning with the work of Turney, many researchers have approached keyphrase extraction as a supervised machine learning problem. Given a document, we construct an example for each unigram, bigram, and trigram found in the text (though other text units are also possible, as discussed below). We then compute various features describing each example (e.g., does the phrase begin with an upper-case letter?). We assume there are known keyphrases available for a set of training documents. Using the known keyphrases, we can assign positive or negative labels to the examples. Then we learn a classifier that can discriminate between positive and negative examples as a function of the features. Some classifiers make a binary classification for a test example, while others assign a probability of being a keyphrase. For ins

  Read more →