AI Generator Character

AI Generator Character — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Anthrobotics

Anthrobotics is the science of developing and studying robots that are either entirely or in some way human-like. The term anthrobotics was originally coined by Mark Rosheim in a paper entitled "Design of An Omnidirectional Arm" presented at the IEEE International Conference on Robotics and Automation, May 13–18, 1990, pp. 2162–2167. Rosheim says he derived the term from "...Anthropomorphic and Robotics to distinguish the new generation of dexterous robots from its simple industrial robot forebears." The word gained wider recognition as a result of its use in the title of Rosheim's subsequent book Robot Evolution: The Development of Anthrobotics, which focussed on facsimiles of human physical and psychological skills and attributes. However, a wider definition of the term anthrobotics has been proposed, in which the meaning is derived from anthropology rather than anthropomorphic. This usage includes robots that respond to input in a human-like fashion, rather than simply mimicking human actions, thus theoretically being able to respond more flexibly or to adapt to unforeseen circumstances. This expanded definition also encompasses robots that are situated in social environments with the ability to respond to those environments appropriately, such as insect robots, robotic pets, and the like. Anthrobotics is now taught at some universities, encouraging students not only to design and build robots for environments beyond current industrial applications, but also to speculate on the future of robotics that are embedded in the world at large, as mobile phones and computers are today. In 2016 philosopher Luis de Miranda created the Anthrobotics Cluster at the University of Edinburgh "a platform of cross-disciplinary research that seeks to investigate some of the biggest questions that will need to be answered" on the relationship between humans, robots and intelligent systems and "a think tank on the social spread of robotics, and also how automation is part of the definition of what humans have always been". to explore the symbiotic relationship between humans and automated protocols.
Read more →
Clipping (computer graphics)

Clipping, in the context of computer graphics, is a method to selectively enable or disable rendering operations within a defined region of interest. Mathematically, clipping can be described using the terminology of constructive geometry. A rendering algorithm only draws pixels in the intersection between the clip region and the scene model. Lines and surfaces outside the view volume (aka. frustum) are removed. Clip regions are commonly specified to improve render performance. Pixels that will be drawn are said to be within the clip region. Pixels that will not be drawn are outside the clip region. More informally, pixels that will not be drawn are said to be "clipped." == In 2D graphics == In two-dimensional graphics, a clip region may be defined so that pixels are only drawn within the boundaries of a window or frame. Clip regions can also be used to selectively control pixel rendering for aesthetic or artistic purposes. In many implementations, the final clip region is the composite (or intersection) of one or more application-defined shapes, as well as any system hardware constraints In one example application, consider an image editing program. A user application may render the image into a viewport. As the user zooms and scrolls to view a smaller portion of the image, the application can set a clip boundary so that pixels outside the viewport are not rendered. In addition, GUI widgets, overlays, and other windows or frames may obscure some pixels from the original image. In this sense, the clip region is the composite of the application-defined "user clip" and the "device clip" enforced by the system's software and hardware implementation. Application software can take advantage of this clip information to save computation time, energy, and memory, avoiding work related to pixels that aren't visible. == In 3D graphics == In three-dimensional graphics, the terminology of clipping can be used to describe many related features. Typically, "clipping" refers to operations in the plane that work with rectangular shapes, and "culling" refers to more general methods to selectively process scene model elements. This terminology is not rigid, and exact usage varies among many sources. Scene model elements include geometric primitives: points or vertices; line segments or edges; polygons or faces; and more abstract model objects such as curves, splines, surfaces, and even text. In complicated scene models, individual elements may be selectively disabled (clipped) for reasons including visibility within the viewport (frustum culling); orientation (backface culling), obscuration by other scene or model elements (occlusion culling, depth- or "z" clipping). Sophisticated algorithms exist to efficiently detect and perform such clipping. Many optimized clipping methods rely on specific hardware acceleration logic provided by a graphics processing unit (GPU). The concept of clipping can be extended to higher dimensionality using methods of abstract algebraic geometry. === Near clipping === Beyond projection of vertices & 2D clipping, near clipping is required to correctly rasterise 3D primitives; this is because vertices may have been projected behind the eye. Near clipping ensures that all the vertices used have valid 2D coordinates. Together with far-clipping it also helps prevent overflow of depth-buffer values. Some early texture mapping hardware (using forward texture mapping) in video games suffered from complications associated with near clipping and UV coordinates. === Occlusion clipping (Z- or depth clipping) === In 3D computer graphics, "Z" often refers to the depth axis in the system of coordinates centered at the viewport origin: "Z" is used interchangeably with "depth", and conceptually corresponds to the distance "into the virtual screen." In this coordinate system, "X" and "Y" therefore refer to a conventional cartesian coordinate system laid out on the user's screen or viewport. This viewport is defined by the geometry of the viewing frustum, and parameterizes the field of view. Z-clipping, or depth clipping, refers to techniques that selectively render certain scene objects based on their depth relative to the screen. Most graphics toolkits allow the programmer to specify a "near" and "far" clip depth, and only portions of objects between those two planes are displayed. A creative application programmer can use this method to render visualizations of the interior of a 3D object in the scene. For example, a medical imaging application could use this technique to render the organs inside a human body. A video game programmer can use clipping information to accelerate game logic. For example, a tall wall or building that occludes other game entities can save GPU time that would otherwise be spent transforming and texturing items in the rear areas of the scene; and a tightly integrated software program can use this same information to save CPU time by optimizing out game logic for objects that aren't seen by the player. == Algorithms == Line clipping algorithms: Cohen–Sutherland Liang–Barsky Fast-clipping Cyrus–Beck Nicholl–Lee–Nicholl Skala O(lg N) algorithm Polygon clipping algorithms: Greiner–Hormann Sutherland–Hodgman Weiler–Atherton Vatti Rendering methodologies Painter's algorithm
Read more →
Non-photorealistic rendering

Non-photorealistic rendering (NPR) is an area of computer graphics that focuses on enabling a wide variety of expressive styles for digital art, in contrast to traditional computer graphics, which focuses on photorealism. NPR is inspired by other artistic modes such as painting, drawing, technical illustration, and animated cartoons. NPR has appeared in movies and video games in the form of cel-shaded animation (also known as "toon" shading) as well as in scientific visualization, architectural illustration and experimental animation. == History and criticism of the term == The term non-photorealistic rendering is believed to have been coined by the SIGGRAPH 1990 papers committee, who held a session entitled "Non Photo Realistic Rendering". The term has received some criticism: The term "photorealism" has different meanings for graphics researchers (see "photorealistic rendering") and artists. For artists—who are the target consumers of NPR techniques—it refers to a school of painting that focuses on reproducing the effect of a camera lens, with all the distortion and hyper-reflections that it creates. For graphics researchers, however, it refers to an image that is visually indistinguishable from reality. In fact, graphics researchers lump the kinds of visual distortions that are used by photorealist painters into "non-photorealism". Describing something by what it is not is problematic. Equivalent (made-up) comparisons might be "non-elephant biology" or "non-geometric mathematics". NPR researchers have stated that they expect the term will disappear eventually and be replaced by the now more general term "computer graphics", with "photorealistic graphics" being the term used to describe "traditional" computer graphics. Many techniques that are used to create 'non-photorealistic' images are not rendering techniques. They are modelling techniques, or post-processing techniques. While the latter are coming to be known as 'image-based rendering', sketch-based modelling techniques, cannot technically be included under this heading, which is very inconvenient for conference organisers. The first conference on non-photorealistic animation and rendering included a discussion of possible alternative names. Among those suggested were "expressive graphics", "artistic rendering", "non-realistic graphics", "art-based rendering", and "psychographics". All of these terms have been used in various research papers on the topic, but the "non-photorealistic" term seems to have nonetheless taken hold. The first technical meeting dedicated to NPR was the ACM-sponsored Symposium on Non-Photorealistic Rendering and Animation(NPAR) in 2000. NPAR is traditionally co-located with the Annecy Animated Film Festival, running on even numbered years. From 2007 onward, NPAR began to also run on odd-numbered years, co-located with ACM SIGGRAPH. == 3D == Three-dimensional NPR is the style that is most commonly seen in video games and movies. The output from this technique is almost always a 3D model that has been modified from the original input model to portray a new artistic style. In many cases, the geometry of the model is identical to the original geometry, and only the material applied to the surface is modified. With increased availability of programmable GPU's, shaders have allowed NPR effects to be applied to the rasterised image that is to be displayed to the screen. The majority of NPR techniques applied to 3D geometry are intended to make the scene appear two-dimensional. NPR techniques for 3D images include cel shading and Gooch shading. Many methods can be used to draw stylized outlines and strokes from 3D models, including occluding contours and Suggestive contours. For enhanced legibility, the most useful technical illustrations for technical communication are not necessarily photorealistic. Non-photorealistic renderings, such as exploded view diagrams, greatly assist in showing placement of parts in a complex system. Cartoon rendering, also called cel shading or toon shading, is a non-photorealistic rendering technique used to give 3D computer graphics a flat, cartoon-like appearance. Its defining feature is the use of distinct shading colors rather than smooth gradients, producing a look reminiscent of comic books or animated films. This technique is often used to blend 3D objects and environments with 2D hand-animated elements while maintaining a consistent look. Treasure Planet movie by Disney is an example of blending these techniques. == 2D == The input to a two dimensional NPR system is typically an image or video. The output is a typically an artistic rendering of that input imagery (for example in a watercolor, painterly or sketched style) although some 2D NPR serves non-artistic purposes e.g. data visualization. The artistic rendering of images and video (often referred to as image stylization) traditionally focused upon heuristic algorithms that seek to simulate the placement of brush strokes on a digital canvas. Arguably, the earliest example of 2D NPR is Paul Haeberli's 'Paint by Numbers' at SIGGRAPH 1990. This (and similar interactive techniques) provide the user with a canvas that they can "paint" on using the cursor — as the user paints, a stylized version of the image is revealed on the canvas. This is especially useful for people who want to simulate different sizes of brush strokes according to different areas of the image. Subsequently, basic image processing operations using gradient operators or statistical moments were used to automate this process and minimize user interaction in the late nineties (although artistic control remains with the user via setting parameters of the algorithms). This automation enabled practical application of 2D NPR to video, for the first time in the living paintings of the movie What Dreams May Come (1998). More sophisticated image abstractions techniques were developed in the early 2000s harnessing computer vision operators e.g. image salience, or segmentation operators to drive stroke placement. Around this time, machine learning began to influence image stylization algorithms notably image analogy that could learn to mimic the style of an existing artwork. The advent of deep learning has re-kindled activity in image stylization, notably with neural style transfer (NST) algorithms that can mimic a wide gamut of artistic styles from single visual examples. These algorithms underpin mobile apps capable of the same e.g. Prisma In addition to the above stylization methods, a related class of techniques in 2D NPR address the simulation of artistic media. These methods include simulating the diffusion of ink through different kinds of paper, and also of pigments through water for simulation of watercolor. == Artistic rendering == Artistic rendering is the application of visual art styles to rendering. For photorealistic rendering styles, the emphasis is on accurate reproduction of light-and-shadow and the surface properties of the depicted objects, composition, or other more generic qualities. When the emphasis is on unique interpretive rendering styles, visual information is interpreted by the artist and displayed accordingly using the chosen art medium and level of abstraction in abstract art. In computer graphics, interpretive rendering styles are known as non-photorealistic rendering styles, but may be used to simplify technical illustrations. Rendering styles that combine photorealism with non-photorealism are known as hyperrealistic rendering styles. == Notable films and games == This section lists some seminal uses of NPR techniques in films, games and software. See cel-shaded animation for a list of uses of toon-shading in games and movies.
Read more →
Fillrate

In computer graphics, a video card's pixel fillrate refers to the number of pixels that can be rendered on the screen and written to video memory in one second. Pixel fillrates are given in megapixels per second or in gigapixels per second (in the case of newer cards), and are obtained by multiplying the number of render output units (ROPs) by the clock frequency of the graphics processing unit (GPU) of a video card. A similar concept, texture fillrate, refers to the number of texture map elements (texels) the GPU can map to pixels in one second. Texture fillrate is obtained by multiplying the number of texture mapping units (TMUs) by the clock frequency of the GPU. Texture fillrates are given in mega or gigatexels per second. However, there is no full agreement on how to calculate and report fillrates. Another possible method is to multiply the number of pixel pipelines by the GPU's clock frequency. The results of these multiplications correspond to a theoretical number. The actual fillrate depends on many other factors. In the past, the fillrate has been used as an indicator of performance by video card manufacturers such as ATI and NVIDIA, however, the importance of the fillrate as a measurement of performance has declined as the bottleneck in graphics applications has shifted. For example, today, the number and speed of unified shader processing units has gained attention. Although fillrate doesn't provide a substantial bottleneck in games, it can still provide a bottleneck for certain parts of the game, for example applying a gaussian blur can be bottlenecked by fillrate. Scene complexity can be increased by overdrawing, which happens when an object is drawn to the frame buffer, and another object (such as a wall) is then drawn on top of it, covering it up. The time spent drawing the first object is thus wasted because it is not visible. When a sequence of scenes is extremely complex (many pixels have to be drawn for each scene), the frame rate for the sequence may drop. When designing graphics intensive applications, one can determine whether the application is fillrate-limited (or shader limited) by seeing if the frame rate increases dramatically when the application runs at a lower resolution or in a smaller window. Although this is not a full-proof method, modern videogame engines can dynamically reduce the level-of-detail required and thereby reducing fillrate-limited applications. The best way to find fillrate bottlenecks is to use GPU vendor software like NVIDIA Nsight Graphics, AMD Radeon GPU Profile and the Intel Graphics Performance Analyzers.
Read more →
Computer audition

Computer audition (CA) or machine listening is the general field of study of algorithms and systems for audio interpretation by machines. Since the notion of what it means for a machine to "hear" is very broad and somewhat vague, computer audition attempts to bring together several disciplines that originally dealt with specific problems or had a concrete application in mind. The engineer Paris Smaragdis, interviewed in Technology Review, talks about these systems — "software that uses sound to locate people moving through rooms, monitor machinery for impending breakdowns, or activate traffic cameras to record accidents." Inspired by models of human audition, CA deals with questions of representation, transduction, grouping, use of musical knowledge and general sound semantics for the purpose of performing intelligent operations on audio and music signals by the computer. Technically this requires a combination of methods from the fields of signal processing, auditory modelling, music perception and cognition, pattern recognition, and machine learning, as well as more traditional methods of artificial intelligence for musical knowledge representation. == Applications == Like computer vision versus image processing, computer audition versus audio engineering deals with understanding of audio rather than processing. It also differs from problems of speech understanding by machine since it deals with general audio signals, such as natural sounds and musical recordings. Applications of computer audition are widely varying, and include search for sounds, genre recognition, acoustic monitoring, music transcription, score following, audio texture, music improvisation, emotion in audio and so on. == Related disciplines == Computer Audition overlaps with the following disciplines: Music information retrieval: methods for search and analysis of similarity between music signals. Auditory scene analysis: understanding and description of audio sources and events. Computational musicology and mathematical music theory: use of algorithms that employ musical knowledge for analysis of music data. Computer music: use of computers in creative musical applications. Machine musicianship: audition driven interactive music systems. == Areas of study == Since audio signals are interpreted by the human ear–brain system, that complex perceptual mechanism should be simulated somehow in software for "machine listening". In other words, to perform on par with humans, the computer should hear and understand audio content much as humans do. Analyzing audio accurately involves several fields: electrical engineering (spectrum analysis, filtering, and audio transforms); artificial intelligence (machine learning and sound classification); psychoacoustics (sound perception); cognitive sciences (neuroscience and artificial intelligence); acoustics (physics of sound production); and music (harmony, rhythm, and timbre). Furthermore, audio transformations such as pitch shifting, time stretching, and sound object filtering, should be perceptually and musically meaningful. For best results, these transformations require perceptual understanding of spectral models, high-level feature extraction, and sound analysis/synthesis. Finally, structuring and coding the content of an audio file (sound and metadata) could benefit from efficient compression schemes, which discard inaudible information in the sound. Computational models of music and sound perception and cognition can lead to a more meaningful representation, a more intuitive digital manipulation and generation of sound and music in musical human-machine interfaces. The study of CA could be roughly divided into the following sub-problems: Representation: signal and symbolic. This aspect deals with time-frequency representations, both in terms of notes and spectral models, including pattern playback and audio texture. Feature extraction: sound descriptors, segmentation, onset, pitch and envelope detection, chroma, and auditory representations. Musical knowledge structures: analysis of tonality, rhythm, and harmonies. Sound similarity: methods for comparison between sounds, sound identification, novelty detection, segmentation, and clustering. Sequence modeling: matching and alignment between signals and note sequences. Source separation: methods of grouping of simultaneous sounds, such as multiple pitch detection and time-frequency clustering methods. Auditory cognition: modeling of emotions, anticipation and familiarity, auditory surprise, and analysis of musical structure. Multi-modal analysis: finding correspondences between textual, visual, and audio signals. === Representation issues === Computer audition deals with audio signals that can be represented in a variety of fashions, from direct encoding of digital audio in two or more channels to symbolically represented synthesis instructions. Audio signals are usually represented in terms of analogue or digital recordings. Digital recordings are samples of acoustic waveform or parameters of audio compression algorithms. One of the unique properties of musical signals is that they often combine different types of representations, such as graphical scores and sequences of performance actions that are encoded as MIDI files. Since audio signals usually comprise multiple sound sources, then unlike speech signals that can be efficiently described in terms of specific models (such as source-filter model), it is hard to devise a parametric representation for general audio. Parametric audio representations usually use filter banks or sinusoidal models to capture multiple sound parameters, sometimes increasing the representation size in order to capture internal structure in the signal. Additional types of data that are relevant for computer audition are textual descriptions of audio contents, such as annotations, reviews, and visual information in the case of audio-visual recordings. === Features === Description of contents of general audio signals usually requires extraction of features that capture specific aspects of the audio signal. Generally speaking, one could divide the features into signal or mathematical descriptors such as energy, description of spectral shape etc., statistical characterization such as change or novelty detection, special representations that are better adapted to the nature of musical signals or the auditory system, such as logarithmic growth of sensitivity (bandwidth) in frequency or octave invariance (chroma). Since parametric models in audio usually require very many parameters, the features are used to summarize properties of multiple parameters in a more compact or salient representation. === Musical knowledge === Finding specific musical structures is possible by using musical knowledge as well as supervised and unsupervised machine learning methods. Examples of this include detection of tonality according to distribution of frequencies that correspond to patterns of occurrence of notes in musical scales, distribution of note onset times for detection of beat structure, distribution of energies in different frequencies to detect musical chords and so on. === Sound similarity and sequence modeling === Comparison of sounds can be done by comparison of features with or without reference to time. In some cases an overall similarity can be assessed by close values of features between two sounds. In other cases when temporal structure is important, methods of dynamic time warping need to be applied to "correct" for different temporal scales of acoustic events. Finding repetitions and similar sub-sequences of sonic events is important for tasks such as texture synthesis and machine improvisation. === Source separation === Since one of the basic characteristics of general audio is that it comprises multiple simultaneously sounding sources, such as multiple musical instruments, people talking, machine noises or animal vocalization, the ability to identify and separate individual sources is very desirable. Unfortunately, there are no methods that can solve this problem in a robust fashion. Existing methods of source separation rely sometimes on correlation between different audio channels in multi-channel recordings. The ability to separate sources from stereo signals requires different techniques than those usually applied in communications where multiple sensors are available. Other source separation methods rely on training or clustering of features in mono recording, such as tracking harmonically related partials for multiple pitch detection. Some methods, before explicit recognition, rely on revealing structures in data without knowing the structures (like recognizing objects in abstract pictures without attributing them meaningful labels) by finding the least complex data representations, for instance describing audio scenes as generated by a few tone patterns and their trajectories (polyphonic voices) and acoustical contours drawn by a tone (c
Read more →
Roposo

Roposo is an Indian video-sharing social media service, owned by Glance, a subsidiary of InMobi. Roposo provides a space where users can share posts related to different topics like food, comedy, music, poetry, fashion and travel. It is a platform where people express visually with homemade videos and photos. The app offers a TV-like browsing experience with user-generated content on its channels. Users can also use editing tools on the platform and upload their content. == History == Established in July 2014 under Relevant E-solutions Pvt. Ltd., Roposo is the brainchild of three IIT Delhi alumni – Mayank Bhangadia, Avinash Saxena, and Kaushal Shubhank. Under Bhangadia's leadership, the company pivoted from a fashion-based network into a short-form video platform with AI-powered moderation, and its journey was featured as a Harvard Business Publishing case study. In November 2019, Roposo was acquired by InMobi's Glance Digital Experience Pvt. Ltd.(the mobile content platform and part of the InMobi Group). When the Chinese-owned video-sharing app TikTok was banned on 30 June 2020, the app saw a huge spike in users with several TikTok users registering on Roposo. == Technology == The open platform has some features such as a TV-like browsing, different channels, a chat feature that lets buyers and sellers converse directly through the platform, and creation tools such as an option to add voice-over, music and GIF stickers for videos and photos.
Read more →
VieON

VieON is an mobile application for television and video on demand provided by VieON Joint Stock Company (formerly Dzones), a subsidiary of DatVietVAC Media and Entertainment Group in Vietnam. The app was launched in 2020, featuring over 140 domestic and international television channels, original series, popular entertainment programs known nationwide, top-tier sports events and live streaming of major events. Additionally, VieON provides animated films, television series and television programs from various countries such as South Korea and China. == History == The application was planned for development in 2016, with the cooperation of strategic consulting partner BCG Digital Ventures from the United States. Prior to 2020, VieON was a rebranded version of VTVcab ON, a product managed by Vietnam Cable Television Corporation (VTVCab) and DatVietVAC. On June 15, 2020, after four years of research and testing, the new version of VieON was officially released by DatVietVAC Group, with Vie Channel Joint Stock Company as the business entity and service provider. This is considered the official launch date of the application. On July 21, 2023, VieON transitioned its business operations and service provision to VieON Joint Stock Company. In January 2024, VieON officially launched its global version, VieON Global, targeting Vietnamese users living abroad. == Background == According to Kantar Media Vietnam, up to 84% of Vietnamese people aged 15–54 use social media daily, and in a similar survey by Nielsen, 90% of respondents said they watch live TV weekly. Additionally, according to research organization Muvi, Southeast Asia's OTT market revenue could reach $650 million annually starting next year. Understanding this, DatVietVAC Group has planned to research and develop an OTT application, even though the Vietnamese market already has some major players such as FPT Play and the international giant Netflix. Additionally, DatVietVAC does not hide its ambition to make this application the number one entertainment channel for Vietnamese people.
Read more →
Intel Management Engine

The Intel Management Engine (ME), also known as the Intel Manageability Engine, is an autonomous subsystem that has been incorporated in virtually all of Intel's processor chipsets since 2008. It is located in the Platform Controller Hub of modern Intel motherboards. The Intel Management Engine always runs as long as the motherboard is receiving power, even when the computer is turned off. This issue can be mitigated with the deployment of a hardware device which is able to disconnect all connections to mains power as well as all internal forms of energy storage. The Electronic Frontier Foundation and some security researchers have voiced concern that the Management Engine is a backdoor. Intel's main competitor, AMD, has incorporated the equivalent AMD Secure Technology (formally called Platform Security Processor) in virtually all of its post-2013 CPUs. == Difference from Intel AMT == The Management Engine is often confused with Intel AMT (Intel Active Management Technology). AMT runs on the ME, but is only available on processors with vPro. AMT gives device owners remote administration of their computer, such as powering it on or off, and reinstalling the operating system. However, the ME itself has been built into all Intel chipsets since 2008, not only those with AMT. While AMT can be unprovisioned by the owner, there is no official, documented way to disable the ME. == Design == The subsystem primarily consists of proprietary firmware running on a separate microprocessor that performs tasks during boot-up, while the computer is running, and while it is asleep. As long as the chipset or SoC is supplied with power (via battery or power supply), it continues to run even when the system is turned off. Intel claims the ME is required to provide full performance. Its exact workings are largely undocumented and its code is obfuscated using confidential Huffman tables stored directly in hardware, so the firmware does not contain the information necessary to decode its contents. === Hardware === Starting with ME 11 (introduced in Skylake CPUs), it is based on the Intel Quark x86-based 32-bit CPU and runs the MINIX 3 operating system. The ME firmware is stored in a partition of the SPI BIOS Flash, using the Embedded Flash File System (EFFS). Previous versions were based on an ARC core, with the Management Engine running the ThreadX RTOS. Versions 1.x to 5.x of the ME used the ARCTangent-A4 (32-bit only instructions) whereas versions 6.x to 8.x used the newer ARCompact (mixed 32- and 16-bit instruction set architecture). Starting with ME 7.1, the ARC processor could also execute signed Java applets. The ME has its own MAC and IP address for the out-of-band management interface, with direct access to the Ethernet controller; one portion of the Ethernet traffic is diverted to the ME even before reaching the host's operating system, for what support exists in various Ethernet controllers, exported and made configurable via Management Component Transport Protocol (MCTP). The ME also communicates with the host via PCI interface. Under Linux, communication between the host and the ME is done via /dev/mei or /dev/mei0. Until the release of Nehalem processors, the ME was usually embedded into the motherboard's northbridge, following the Memory Controller Hub (MCH) layout. With the newer Intel architectures (Intel 5 Series onwards), the ME is integrated into the Platform Controller Hub (PCH). === Firmware === By Intel's current terminology as of 2017, ME is one of several firmware sets for the Converged Security and Manageability Engine (CSME). Prior to AMT version 11, CSME was called Intel Management Engine BIOS Extension (Intel MEBx). Management Engine (ME) – mainstream chipsets Server Platform Services (SPS) – server chipsets and SoCs Trusted Execution Engine (TXE) – tablet/embedded/low power It was also found that the ME firmware version 11 runs MINIX 3. Management of the ME modules for provisioning inside the UEFI is done via a tool called Intel Flash Image Tool (FITC). ==== Modules ==== Active Management Technology (AMT) Intel Boot Guard (IBG) and Secure Boot Quiet System Technology (QST), formerly known as Advanced Fan Speed Control (AFSC), which provides support for acoustically optimized fan speed control, and monitoring of temperature, voltage, current and fan speed sensors that are provided in the chipset, CPU and other devices present on the motherboard. Communication with the QST firmware subsystem is documented and available through the official software development kit (SDK). Protected Audio Video Path, enforces HDCP Intel Anti-Theft Technology (AT), discontinued in 2015 Serial over LAN (SOL) Intel Platform Trust Technology (PTT), a firmware-based Trusted Platform Module (TPM) Near Field Communication, a middleware for NFC readers and vendors to access NFC cards and provide secure element access, found in later MEI versions. == The intricacies of working with Intel ME == It should also be noted that the ME region requires special cleaning and subsequent initialisation, for example, after replacing the platform hub on the motherboard. Usually, this requires an SPI programmer. There are known successful cases of this operation being performed. == Security vulnerabilities == Several weaknesses have been found in the ME. On May 1, 2017, Intel confirmed a Remote Elevation of Privilege bug (SA-00075) in its Management Technology. Every Intel platform with provisioned Intel Standard Manageability, Active Management Technology, or Small Business Technology, from Nehalem in 2008 to Kaby Lake in 2017 has a remotely exploitable security hole in the ME. Several ways to disable the ME without authorization that could allow ME's functions to be sabotaged have been found. Additional major security flaws in the ME affecting a very large number of computers incorporating ME, Trusted Execution Engine (TXE), and Server Platform Services (SPS) firmware, from Skylake in 2015 to Coffee Lake in 2017, were confirmed by Intel on November 20, 2017 (SA-00086). Unlike SA-00075, this bug is even present if AMT is absent, not provisioned or if the ME was "disabled" by any of the known unofficial methods. In July 2018, another set of vulnerabilities was disclosed (SA-00112). In September 2018, yet another vulnerability was published (SA-00125). === Ring −3 rootkit === A ring −3 rootkit was demonstrated by Invisible Things Lab for the Q35 chipset; it does not work for the later Q45 chipset as Intel implemented additional protections. The exploit worked by remapping the normally protected memory region (top 16 MB of RAM) reserved for the ME. The ME rootkit could be installed regardless of whether the AMT is present or enabled on the system, as the chipset always contains the ARC ME coprocessor. (The "−3" designation was chosen because the ME coprocessor works even when the system is in the S3 state. Thus, it was considered a layer below the System Management Mode rootkits.) For the vulnerable Q35 chipset, a keystroke logger ME-based rootkit was demonstrated by Patrick Stewin. === Zero-touch provisioning === Another security evaluation by Vassilios Ververis showed serious weaknesses in the GM45 chipset implementation. In particular, it criticized AMT for transmitting unencrypted passwords in the SMB provisioning mode when the IDE redirection and Serial over LAN features are used. It also found that the "zero touch" provisioning mode (ZTC) is still enabled even when the AMT appears to be disabled in BIOS. For about 60 euros, Ververis purchased from GoDaddy a certificate that is accepted by the ME firmware and allows remote "zero touch" provisioning of (possibly unsuspecting) machines, which broadcast their HELLO packets to would-be configuration servers. === SA-00075 (a.k.a. Silent Bob is Silent) === In May 2017, Intel confirmed that many computers with AMT have had an unpatched critical privilege escalation vulnerability (CVE-2017-5689). The vulnerability was nicknamed "Silent Bob is Silent" by the researchers who had reported it to Intel. It affects numerous laptops, desktops and servers sold by Dell, Fujitsu, Hewlett-Packard (later Hewlett Packard Enterprise and HP Inc.), Intel, Lenovo, and possibly others. Those researchers claimed that the bug affects systems made in 2010 or later. Other reports claimed the bug also affects systems made as long ago as 2008. The vulnerability was described as giving remote attackers: "full control of affected machines, including the ability to read and modify everything. It can be used to install persistent malware (possibly in firmware), and read and modify any data." === PLATINUM === In June 2017, the PLATINUM cybercrime group became notable for exploiting the serial over LAN (SOL) capabilities of AMT to perform data exfiltration of stolen documents. SOL is disabled by default and must be enabled to exploit this vulnerability. === SA-00086 === Some months after the previous bugs, and subsequent warnings from the EFF, securi
Read more →
Enonic XP

Enonic XP is a free and open-source content platform. Developed by the Norwegian software company Enonic, the platform can be used to build websites, progressive web applications, or web-based APIs. Enonic XP uses an application framework for coding server logic with JavaScript, and has no need for SQL as it ships with an integrated content repository. The CMS is fully decoupled, meaning developers can create traditional websites and landing pages, or use XP in headless mode, that is without the presentation layer, for loading editorial content onto any device or client. Enonic is used by major organizations in Norway, including the national postal service Norway Post, the insurance company Gjensidige, the Norwegian Labour and Welfare Administration, and all the top football clubs in the national football league for men, Eliteserien. == Overview == Enonic XP ships with the content management system (CMS) Content Studio. This includes a visual drag and drop editor, a landing page editor, support for multi-site and multi-language, media and structured content, advanced image editing, responsive user interface, permissions and roles management, revision and version control, and bulk publishing. Integrations and applications can be directly installed via the "Applications" section in XP, where the platform finds apps approved in the official Enonic Market. There are no third-party databases in Enonic XP. Instead, the developers have built a distributed storage repository, avoiding the need to index content. The system brings together capabilities from Filesystem, NoSQL, document stores, and search in the storage technology, which automatically indexes everything put into the storage. Enonic XP supports deployment of server side JavaScript. The open-source framework runs on top of a JVM (Java virtual machine), and allows developers to run the same code in the browser and on the server, thus enabling them to employ JavaScript. While running on the Java virtual machine, Enonic XP can be deployed on most infrastructures. The dependency on a third-party application server to deploy code has been removed, as the platform is an application server by default. A developer can for instance insert his own modules and code straight into the system while it is running. JavaScript unifies all the technical elements, and Enonic XP features a MVC framework where everything on the back-end can be coded with server-side JavaScript. The Enonic platform can use any template engine. === Progressive web apps === Another feature of Enonic XP is the possibility for developers to create progressive web apps (PWA). A PWA is a web application that is a regular web page or website, but can appear to the user like a mobile application. === Headless CMS and integrations === Enonic XP is headless, which means it separates content and presentation. The platform supports GraphQL, provides several default APIs, and allows for building custom APIs through the Guillotine starter kit. Consequently, Enonic supports modern front-end frameworks, and offers integrations with e.g. Next.js and React. == History == Enonic AS was founded in 2000 by Morten Øien Eriksen and Thomas Sigdestad. The software company specialized in building services and solutions, including a content management system known as "Vertical Site", then "Enonic CMS". Being aware that they had application, database, and website teams working on separate silos toward the same goal, Enonic sought to combine the different elements into a single software. The resulting application platform Enonic XP, first released in 2015, includes a CMS as an optional surface layer. In March 2020, Enonic XP was ranked by SoftwareReviews, a division of Info-Tech Research Group, a Canadian IT research and analyst firm, as the "Leader" in Web Experience Management. The ranking is based on user reviews, and is featured in SoftwareReviews‘ Digital Experience Data Quadrant Report, a comprehensive evaluation and ranking of leading Web Experience Management vendors. Enonic was also ranked first in 2021 and 2022. === Release history === Enonic XP assumed the mantle from the previous content management system Enonic CMS, and thus began with "version 5.0.0." The following list only contains major releases. == Development and support == Enonic offers a user and developer community consisting of a forum, support system with tickets, documentation, codex, learning and training center with certifications, and various community groups. Writing about the support system, Mike Johnston of CMS Critic notes that "enterprise customers obviously get access to a higher level of personalized support, where the Enonic support team can respond as fast as two hours." The support system is divided in three levels: silver, gold and platinum—from next day business support to 24/7 support. As Enonic XP is open-source, known vulnerabilities, bugs and issues are listed on GitHub.
Read more →
Display list

A display list, also called a command list in Direct3D 12 and a command buffer in Vulkan, is a series of graphics commands or instructions that are run when the list is executed. Systems that make use of display list functionality are called retained mode systems, while systems that do not are as opposed to immediate mode systems. In OpenGL, display lists are useful to redraw the same geometry or apply a set of state changes multiple times. This benefit is also used with Direct3D 12's bundle command lists. In Direct3D 12 and Vulkan, display lists are regularly used for per-frame recording and execution. == Origins in vector displays == The vector monitors or calligraphic displays of the 1960s and 1970s used electron beam deflection to draw line segments, points, and sometimes curves directly on a CRT screen. Because the image would immediately fade, it needed to be redrawn many times a second (storage tube CRTs retained the image until blanked, but they were unsuitable for interactive graphics). To refresh the display, a dedicated CPU called a Display Processor or Display Processing Unit (DPU) was used, which had a memory buffer for a "display list", "display file", or "display program" containing line segment coordinates and other information. Advanced Display Processors also supported control flow instructions, which were useful for drawing repetitive graphics such as text, and some could perform coordinate transformations such as 3D projection. == Home computer display list functionality == One of the earliest systems with a true display list was the Atari 8-bit computers. The display list (actually called so in Atari terminology) is a series of instructions for ANTIC, the video co-processor used in these machines. This program, stored in the computer's memory and executed by ANTIC in real-time, can specify blank lines, any of six text modes and eight graphics modes, which sections of the screen can be horizontally or vertically fine-scrolled, and trigger Display List Interrupts (called raster interrupts or HBI on other systems). The Amstrad PCW family contains a Display List function called the 'Roller RAM'. This is a 512-byte RAM area consisting of 256 16-bit pointers in RAM, one for each line of the 720 × 256 pixel display. Each pointer identifies the location of 90 bytes of monochrome pixels that hold the line's 720 pixel states. The 90 bytes of 8 pixel states are spaced at 8-byte intervals, so there are 7 unused bytes between each byte of pixel data. This suits how the text-orientated PCW constructs a typical screen buffer in RAM, where the first character's 8 rows are stored in the first 8 bytes, the second character's rows in the next 8 bytes, and so on. The Roller RAM was implemented to speed up display scrolling as it would have been unacceptably slow for its 3.4 MHz Z80 to move up the 23 KB display buffer 'by hand' i.e. in software. The Roller RAM starting entry used at the beginning of a screen refresh is controlled by a Z80-writable I/O register. Therefore, the screen can be scrolled simply by changing this I/O register. Another system using a Display List-like feature in hardware is the Amiga, which, not coincidentally, was also designed by some of the same people who developed the custom hardware for the Atari 8-bit computers. Once directed to produce a display mode, it would continue to do so automatically for every following scan line. The computer also included a dedicated co-processor, called "Copper", which ran a simple program or 'Copper List' intended for modifying hardware registers in sync with the display. The Copper List instructions could direct the Copper to wait for the display to reach a specific position on the screen, and then change the contents of hardware registers. In effect, it was a processor dedicated to servicing raster interrupts. The Copper was used by Workbench to mix multiple display modes (multiple resolutions and color palettes on the monitor at the same time), and by numerous programs to create rainbow and gradient effects on the screen. The Amiga Copper was also capable of reconfiguring the sprite engine mid-frame, with only one scanline of delay. This allowed the Amiga to draw more than its 8 hardware sprites, so long as the additional sprites did not share scanlines (or the one scanline gap) with more than 7 other sprites. i.e., so long as at least one sprite had finished drawing, another sprite could be added below it on the screen. Additionally, the later 32-bit AGA chipset allowed the drawing of bigger sprites (more pixels per row) while retaining the same multiplexing. The Amiga also had dedicated block-shifter ("blitter") hardware, which could draw larger objects into a framebuffer. This was often used in place of, or in addition to, sprites. In more primitive systems, the results of a display list can be simulated, though at the cost of CPU-intensive writes to certain display modes, color control, or other visual effect registers in the video device, rather than a series of rendering commands executed by the device. Thus, one must create the displayed image using some other rendering process, either before or while the CPU-driven display generation executes. In many cases, the image is also modified or re-rendered between frames. The image is then displayed in various ways, depending on the exact way in which the CPU-driven display code is implemented. Examples of the results possible on these older machines requiring CPU-driven video include effects such as Commodore 64/128's FLI mode, or Rainbow Processing on the ZX Spectrum. == Usage in OpenGL == To delimit a display list, the glNewList and glEndList functions are used, and to execute the list, the glCallList function is used. Almost all rendering commands that occur between the function calls are stored in the display list. Commands that affect the client state are not stored in display lists. Display lists are named with an integer value, and creating a display list with the same name as one already created overrides the first. The glNewList function expects two arguments: an integer representing the name of the list, and an enumeration for the compilation mode. The two modes include GL_COMPILE_AND_EXECUTE, which compiles and immediately executes, and GL_COMPILE, which only compiles the list. Display lists enable the use of the retained mode rendering pattern, which is a system in which graphics commands are recorded (retained) to execute in succession at a later time. This is contrary to immediate mode, where graphics commands are immediately executed on client calls. == Usage in Direct3D 12 == Command lists are created using the ID3D12Device::CreateCommandList function. Command lists may be created in several types: direct, bundle, compute, copy, video decode, video process, and video encoding. Direct command lists specify that a command list the GPU can execute, and doesn't inherit any GPU state. Bundles, are best used for storing and executing small sets of commands any number of times. This is used differently than regular command lists, where commands stored in a command list are typically executed only once. Compute command lists are used for general computations, with a common use being calculating mipmaps. A copy command list is strictly for copying and the video decode and video process command lists are for video decoding and processing respectively. Upon creation, command lists are in the recording state. Command lists may be re-used by calling the ID3D12GraphicsCommandList::Reset function. After recording commands, the command list must be transitioned out of the recording state by calling ID3D12GraphicsCommandList::Close. The command list is then executed by calling ID3D12CommandQueue::ExecuteCommandLists.
Read more →
Database virtualization

Database virtualization is the decoupling of the database layer, which lies between the storage and application layers within the application stack. Virtualization of the database layer enables a shift away from the physical, toward the logical or virtual. Virtualization enables compute and storage resources to be pooled and allocated on demand. This enables both the sharing of single server resources for multi-tenancy, as well as the pooling of server resources into a single logical database or cluster. In both cases, database virtualization provides increased flexibility, more granular and efficient allocation of pooled resources, and more scalable computing. == Virtual data partitioning == The act of partitioning data stores as a database grows has been in use for several decades. There are two primary ways that data has been partitioned inside legacy data management systems: Shared-data databases: an architecture that assumes all database cluster nodes share a single partition. Inter-node communications are used to synchronize update activities performed by different nodes on the cluster. Shared-data data management systems are limited to single-digit node clusters. Shared-nothing databases: an architecture in which all data is segregated to internally managed partitions with clear, well-defined data location boundaries. Shared-nothing databases require manual partition management. In virtual partitioning, logical data is abstracted from physical data by autonomously creating and managing large numbers of data partitions (100s to 1000s). Because they are autonomously maintained, the resources required to manage the partitions are minimal. This kind of massive partitioning results in: Partitions that are small, efficiently managed, and load-balanced. Systems that do not require re-partitioning events to define additional partitions, even when the hardware is changed. “Shared-data” and “shared-nothing” architectures allow scalability through multiple data partitions and cross-partition querying and transaction processing without full partition scanning. == Horizontal data partitioning == Partitioning database sources from consumers is a fundamental concept. With greater numbers of database sources, inserting a horizontal data virtualization layer between the sources and consumers helps address this complexity. Rick van der Lans, the author of multiple books on SQL and relational databases, has defined data virtualization as "the process of offering data consumers a data access interface that hides the technical aspects of stored data, such as location, storage structure, API, access language, and storage technology." == Advantages == Added flexibility and agility for existing computing infrastructure. Enhanced database performance. Pooling and sharing computing resources, either splitting them (multi-tenancy) or combining them (clustering). Simplification of administration and management. Increased fault tolerance.
Read more →
Shader lamps

Shader lamps is a computer graphic technique used to change the appearance of physical objects. The still or moving objects are illuminated, using one or more video projectors, by static or animated texture or video stream. The method was invented at University of North Carolina at Chapel Hill by Ramesh Raskar, Greg Welch, Kok-lim Low and Deepak Bandyopadhyay in 1999 [1] as a follow on to Spatial Augmented Reality [2] also invented at University of North Carolina at Chapel Hill in 1998 by Ramesh Raskar, Greg Welch and Henry Fuchs. A 3D graphic rendering software is typically used to compute the deformation caused by the non perpendicular, non-planar or even complex projection surface. Complex objects (or aggregation of multiple simple objects) create self shadows that must be compensated by using several projectors. The objects are typically replaced by neutral color ones, the projection giving all its visual properties, thus the name shader lamps. The technique can be used to create a sense of invisibility, by rendering transparency. The object is illuminated not by a replacement of its own visual properties, but by the corresponding visual surface placed behind the object as seen from an arbitrary viewing point.
Read more →
Cloudlet

A cloudlet is a mobility-enhanced small-scale cloud datacenter that is located at the edge of the Internet. The main purpose of the cloudlet is supporting resource-intensive and interactive mobile applications by providing powerful computing resources to mobile devices with lower latency. It is a new architectural element that extends today's cloud computing infrastructure. It represents the middle tier of a 3-tier hierarchy: mobile device - cloudlet - cloud. A cloudlet can be viewed as a data center in a box whose goal is to bring the cloud closer. The cloudlet term was first coined by M. Satyanarayanan, Victor Bahl, Ramón Cáceres, and Nigel Davies, and a prototype implementation is developed by Carnegie Mellon University as a research project. The concept of cloudlet is also known as follow me cloud, and mobile micro-cloud. == Motivation == Many mobile services split the application into a front-end client program and a back-end server program following the traditional client-server model. The front-end mobile application offloads its functionality to the back-end servers for various reasons such as speeding up processing. With the advent of cloud computing, the back-end server is typically hosted at the cloud datacenter. Though the use of a cloud datacenter offers various benefits such as scalability and elasticity, its consolidation and centralization lead to a large separation between a mobile device and its associated datacenter. End-to-end communication then involves many network hops and results in high latencies and low bandwidth. For the reasons of latency, some emerging mobile applications require cloud offload infrastructure to be close to the mobile device to achieve low response time. In the ideal case, it is just one wireless hop away. For example, the offload infrastructure could be located in a cellular base station or it could be LAN-connected to a set of Wi-Fi base stations. The individual elements of this offload infrastructure are referred to as cloudlets. == Applications == Cloudlets aim to support mobile applications that are both resource-intensive and interactive. Augmented reality applications that use head-tracked systems require end-to-end latencies of less than 16 ms. Cloud games with remote rendering also require low latencies and high bandwidth. Wearable cognitive assistance systems combine devices such as Google Glass with cloud-based processing to guide users through complex tasks. This futuristic genre of applications is characterized as “astonishingly transformative” by the report of the 2013 NSF Workshop on Future Directions in Wireless Networking. These applications use cloud resources in the critical path of real-time user interaction. Consequently, they cannot tolerate end-to-end operation latencies of more than a few tens of milliseconds. Apple Siri and Google Now which perform compute-intensive speech recognition in the cloud, are further examples in this emerging space. == Cloudlet vs Cloud == There is significant overlap in the requirements for cloud and cloudlet. At both levels, there is the need for: (a) strong isolation between untrusted user-level computations; (b) mechanisms for authentication, access control, and metering; (c) dynamic resource allocation for user-level computations; and, (d) the ability to support a very wide range of user-level computations, with minimal restrictions on their process structure, programming languages or operating systems. At a cloud datacenter, these requirements are met today using the virtual machine (VM) abstraction. For the same reasons they are used in cloud computing today, VMs are used as an abstraction for cloudlets. Meanwhile, there are a few but important differentiators between cloud and cloudlet. === Rapid provisioning === Different from cloud data centers that are optimized for launching existing VM images in their storage tier, cloudlets need to be much more agile in their provisioning. Their association with mobile devices is highly dynamic, with considerable churn due to user mobility. A user from far away may unexpectedly show up at a cloudlet (e.g., if he just got off an international flight) and try to use it for an application such as a personalized language translator. For that user, the provisioning delay before he is able to use the application impacts usability. === VM handoff across cloudlets === If a mobile device user moves away from the cloudlet he is currently using, the interactive response will degrade as the logical network distance increases. To address this effect of user mobility, the offloaded services on the first cloudlet need to be transferred to the second cloudlet maintaining end-to-end network quality. This resembles live migration in cloud computing but differs considerably in a sense that the VM handoff happens in Wide Area Network (WAN). == OpenStack++ == Since the cloudlet model requires reconfiguration or additional deployment of hardware/software, it is important to provide a systematic way to incentivise the deployment. However, it can face a classic bootstrapping problem. Cloudlets need practical applications to incentivize cloudlet deployment. However, developers cannot heavily rely on cloudlet infrastructure until it is widely deployed. To break this deadlock and bootstrap the cloudlet deployment, researchers at Carnegie Mellon University proposed OpenStack++ that extends OpenStack to leverage its open ecosystem. OpenStack++ provides a set of cloudlet-specific APIs as OpenStack extensions. == Commercial implementations and standardization effort == By 2015 cloudlet based applications were commercially available. In 2017 the National Institute of Standards and Technology published draft standards for fog computing in which cloudlets were defined as nodes on the fog architecture.
Read more →
Probiv

Probiv (Russian: пробив, literally "to pierce" or "to punch through") is an illicit data market operating primarily in Russia, where personal information from restricted government and corporate databases is bought and sold through networks of corrupt officials and insiders. The probiv market operates as a parallel information economy built on corrupt officials from various sectors including traffic police, banks, telecommunications companies, and security services who sell access to restricted databases. For fees ranging from as little as $10 to several hundred dollars, buyers can obtain passport numbers, addresses, travel histories, vehicle registrations, and telecommunications records. The market operates through various channels, including specialized Telegram bots and darknet forums. == Notable uses == Probiv services have been utilized by diverse actors for various purposes. Investigative journalists have used the market to conduct high-profile investigations, including tracing the FSB unit allegedly behind the poisoning of Alexei Navalny. Russian police and security services themselves have routinely used the black market to track activists and opposition figures. Since Russia's invasion of Ukraine, Ukrainian intelligence services have exploited the market to identify Russian military officials. == Government response == In late 2024, Russian authorities introduced legislation imposing penalties of up to ten years in prison for accessing or distributing leaked data. Several operators of probiv services, including the teams behind Usersbox and Solaris, have been arrested. However, the crackdown appears to have had unintended consequences. Many operators have relocated their businesses abroad, where they operate with fewer constraints. Some services that previously cooperated with Russian authorities have severed those ties and moved staff out of the country.
Read more →
WIPO GREEN

WIPO GREEN is a World Intellectual Property Organization program established in 2013 that supports global efforts to address climate change and food security through sharing of sustainable technology innovations. == WIPO GREEN database == The WIPO GREEN database is the foundation of the platform. The database is a free, solutions-oriented, global innovation catalog that connects needs for solving environmental or climate change problems with sustainable solutions from prototypes to marketable products available for sale, license, collaborations, knowledge transfer, joint ventures, or collaborations. Green technology innovators can promote their products, businesses, organizations, and governments looking for green technologies can explain their needs and seek collaboration with providers. As of July 2022, WIPO GREEN has over 120,000 technologies, needs and experts, more than 2000 users in 110 countries, and has recorded over 1000 connections made between technology providers and seekers. The database utilizes AI-assisted auto-matching, user uploads tracing and alerts, full-text search for solutions based on long need descriptions, and the Patent2Solution search function for finding commercial applications of a patent, which are some of the unique features of the database. Free registration is required for detailed record view and uploading. All technologies uploaded to the WIPO GREEN database remain the property of the rights holder. It is up to the rights holder and the collaborating parties to structure agreements in the manner they feel is most appropriate and effective. WIPO GREEN does not require that technologies or innovations uploaded to the database be patented or in the process of being patented. Therefore, technology providers can upload their technology while related patent applications are pending. Technology providers are encouraged to upload technology solutions on the WIPO GREEN database and connect with other users to explore partnerships, technology transfers, including funding and licensing opportunities. == Acceleration projects == Acceleration projects work with WIPO GREEN partners and local organizations to explore local challenges and green opportunities for particular environmental needs. These projects are organized annually in different countries or regions around and connect providers and seekers of green technologies. For example, the Latin America Acceleration Project explores innovative new technologies in the region and facilitates green technology exchange between providers and seekers in green opportunities in intensified crop rotation, soil re-carbonization, and forest management in Argentina; zero-till or conservation agriculture in Brazil; and wine production in Chile. In October 2021, a project in Indonesia on palm oil mill effluent (POME), a by-product of palm oil production that emits greenhouse gases and reportedly harms flora and fauna in local rivers, identified viable green solutions to turn the high organic content of POME wastewater into biogas and other environmentally friendly uses. Former projects took place in Cambodia, Indonesia, and the Philippines around wastewater treatment, agriculture, and water technologies. == The Green Technology Book == In November 2022 at UNFCCC COP27, WIPO introduced its new Flagship publication the Green Technology Book. This digital-first publication aims to put innovation, technology and intellectual property at the forefront in the fight against climate change. The inaugural edition of this annual publication focused on available solutions for climate-change adaptation to reduce vulnerability as well as to increase resilience to the impacts of climate change. The book was created in cooperation with the Climate Technology Center and Network (CTCN) and the Egyptian Academy of Scientific Research and Technology (ASTR). It features 200 adaptation technologies, which are also available in the WIPO GREEN database of innovative technologies and needs. == Partners Network == WIPO GREEN partners are public or private institutions that wish to collaborate to advance WIPO GREEN’s mission. The network is aimed at helping the implementation and diffusion of green technology innovations around the world. Partners include government institutions, intergovernmental organizations, academia, and businesses – from small and medium-sized enterprises to Fortune 500 companies. As of 2022, WIPO GREEN has a network of over 146 partner organizations involved in green technology.
Read more →