AI For Students Articles

AI For Students Articles — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Image warping

  Image warping is the process of digitally manipulating an image such that any shapes portrayed in the image have been significantly distorted. Warping may be used for correcting image distortion as well as for creative purposes (e.g., morphing). The same techniques are equally applicable to video. While an image can be transformed in various ways, pure warping means that points are mapped to points without changing the colors. This can be based mathematically on any function from (part of) the plane to the plane. If the function is injective the original can be reconstructed. If the function is a bijection any image can be inversely transformed. Some methods are: Images may be distorted through simulation of optical aberrations. Images may be viewed as if they had been projected onto a curved or mirrored surface. (This is often seen in ray traced images.) Images can be partitioned into image polygons and each polygon distorted. Images can be distorted using morphing. The most obvious approach to transforming a digital image is the forward mapping. This applies the transform directly to the source image, typically generating unevenly-spaced points that will then be interpolated to generate the required regularly-spaced pixels. However, for injective transforms reverse mapping is also available. This applies the inverse transform to the target pixels to find the unevenly-spaced locations in the source image that contribute to them. Estimating them from source image pixels will require interpolation of the source image. To work out what kind of warping has taken place between consecutive images, one can use optical flow estimation techniques. == Image warping toolbox == ImWIP is an open-source, image warping tool for modeling deformation and motion in digital images, which contains differentiable image warping operators, together with their exact adjoints and derivatives.

  Read more →
• 

  Site Security Handbook

  The Site Security Handbook, RFC 2196, is a guide on setting computer security policies and procedures for sites that have systems on the Internet (however, the information provided should also be useful to sites not yet connected to the Internet). The guide lists issues and factors that a site must consider when setting their own policies. It makes a number of recommendations and provides discussions of relevant areas. This guide is only a framework for setting security policies and procedures. In order to have an effective set of policies and procedures, a site will have to make many decisions, gain agreement, and then communicate and implement these policies. The guide is a product of the IETF SSH working group, and was published in 1997, obsoleting the earlier RFC 1244 from 1991.

  Read more →
• 

  Vigloo

  Vigloo (Korean: 비글루) is a South Korean microdrama, also known as short-form drama, series streaming platform owned by SpoonLabs, with headquarters in Seoul. It provides content produced in South Korea, Japan, and the United States. Vigloo produced the first AI-created short-form drama in South Korea. == History == Vigloo launched in July 2024. After receiving an equity investment of $86 million (₩120 billion) by South Korean video game company Krafton in September 2024, Vigloo expanded to the U.S. In January 2025, Vigloo unveiled its first in-house produced drama, Xs Who Want to Kill: Adultery Investigation Unit. Vigloo had been testing the use of AI in post-production and visual effects, and in October 2025 released two original dramas produced entirely with AI. It adapted its live action Japanese short-form drama Boyfriend Search Project – Kissing 5 Men into the first short-form animation series made with AI technology in South Korea. Of the top free entertainment iOS apps in South Korea, Vigloo ranks Number 3 as of January 2026. == Service == === Content === Vigloo offers both original and licensed content. It partnered with Passionflix to repackage the latter's original series The Secret Life of Amy Bensen into 35 vertical "bite-sized episodes". The most popular genre is romance, such as romantasy. === Business Model === Vigloo is available around the world, providing subtitles in nine languages, including Korean, English, and Japanese. Fifty percent of Vigloo's revenue comes from the U.S. Vigloo operates on a freemium model, where viewers can try several episodes and then can choose to continue by subscription or in-app purchases. As of September 2025, 70% of Vigloo viewers were over 35 years old. === Microdramas === Emerging during the early COVID period in China, microdramas have grown into a 7-billion-dollar market with dozens of dedicated platforms now operating. Although the format first expanded across Asia, short-form scripted content optimized for mobile viewing is increasingly being produced and watched in markets worldwide. == Series == A Vampire in the Alpha's Den Fight for Love Matrimoney Signed, Sealed, Deceived by My Billionaire Mailboy Spring Break Bucket List Stake to the Heart

  Read more →
• 

  Tandem Money

  Tandem is one of the UK's original challenger banks. Tandem is a digital bank with a mobile app, and no branches. The acquisition of Harrods Bank in 2017 allowed the company to provide services using the former's banking licence. Tandem Bank Limited is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority. Tandem has offices across the UK in Blackpool, Cardiff, Durham and London, employing over 500 people. == History == The company was founded by Ricky Knox, Matt Cooper and Michael Kent in 2014. In December 2016, Tandem announced that it had secured a £35 million investment from The Sanpower Group, the Chinese company that also owned the department store House of Fraser; however, £29 million of this investment was later revoked by Sanpower over concerns that the Chinese Government would object to the investment following increased restrictions on outbound investment in China. This resulted in a delay in the launch of Tandem's savings products, which, at the time of the revocation, was expected imminently and, more importantly, meant that Tandem volunteered the return of their banking license but retained all other permissions. In April 2018, Tandem launched fixed-term savings accounts, offering one-, two- and three-year terms through its app. === Acquisitions === In August 2017, it was announced that Tandem would fully acquire Harrods Bank, founded in 1893, in a deal that would bring a near-£200m loan book, over £300m of deposits and nearly £80 million of capital. Prior to its sale to Tandem Money, Harrods Bank catered for high-net-worth (HNW) individuals and operated from the Harrods store in Knightsbridge, London. It offered a variety of personal and business current and savings accounts, mortgages, foreign currency and gold bullion trading services. On 7 August 2017, Tandem Money Limited announced a deal to acquire 100% of Harrods Bank Limited shares. The purchase deal closed successfully on 11 January 2018. In March 2018, Tandem agreed to acquire Pariti Technologies Limited, developers of the Pariti money management application. In August 2020 Tandem acquired green home improvement loan specialists Allium Lending Group. It was announced on 8 February 2021 that Tandem had agreed to purchase the mortgage book from private bank Bank and Clients, consisting of 300 B&C customers for an undisclosed amount. In January 2022 Tandem Bank acquired consumer lender Oplo, creating a combined business with £1.2 billion of total assets. In April 2023, it was announced that Tandem had acquired money-sharing app Loop Money. At the time of the purchase, one of Loop's founders – Paul Pester – was also chairman at Tandem. == Features == Tandem Bank offers customers savings, mortgages, personal and secured loans, green home improvement loans and motor finance. In November 2022, the bank launched its new Tandem Marketplace, providing information and resources to help promote greener living.

  Read more →
• 

  Real-Time UML

  Real-Time UML (RTUML) refers to the application of the Unified Modelling Language (UML) for the analysis, design, and implementation of real-time and embedded systems, where timing constraints, concurrency, and resource management are critical. It extends standard UML with profiles, notations, and semantics to handle hard and soft real-time requirements, such as modelling predictable response times and fault tolerance. RTUML is not a separate language but a methodology leveraging UML diagrams (e.g., statecharts, sequence diagrams) for time-sensitive applications like automotive controls, avionics, and medical devices. The term is closely associated with Bruce Powel Douglass, who popularised it through his books and the Harmony process for embedded software development. As of 2025, RTUML remains relevant in industries requiring certified systems, though its adoption varies with agile methodologies and model-driven engineering tools. == Background == Real-Time UML emerged in the late 1990s as UML was standardized by the Object Management Group (OMG) in 1997, addressing the need for object-oriented modeling in real-time systems previously dominated by procedural languages like C. Traditional real-time development relied on "bare metal" programming or theoretical models, but RTUML introduced visual notations for object structure, behaviour, and timing. Bruce Powel Douglass’s 1999 book, Real-Time UML: Developing Efficient Objects for Embedded Systems, formalised the approach, emphasising statecharts for concurrency and timing constraints. Later editions (2004, 2006) incorporated UML 2.0 features like activity and timing diagrams, aligning with OMG’s Real-Time Profile (now part of MARTE—Modelling and Analysis of Real-Time and Embedded Systems). The Harmony process integrates RTUML with executable models for simulation and code generation. RTUML addresses hard real-time systems (e.g., strict deadlines in avionics) versus soft real-time (e.g., media streaming), using UML extensions for schedulability analysis. == Key concepts == RTUML adapts UML diagrams and techniques for real-time needs: Statecharts and Behaviour Modelling: Extended state machines model reactive behaviour, using and-states for concurrency, pseudostates for transitions, and timing constraints (e.g., {duration < 10ms}). Examples include cardiac pacemaker models. Sequence and Interaction Diagrams: Capture message timing, priorities, and resource allocation in multi-threaded systems. Architectural Patterns: Define logical and physical architectures with active objects for concurrency and patterns like observer or publisher-subscriber. Timing and Constraints: Use Object Constraint Language (OCL) for specifying deadlines and priorities. Profiles and Extensions: OMG’s UML Profile for Schedulability, Performance, and Time (SPT) and MARTE add stereotypes like RT::ActiveObject. These support iterative development, from requirements to deployment, often with tools like IBM Rhapsody or Enterprise Architect. == Applications == RTUML is used in: Embedded Systems: Modelling automotive ECUs or UAV controls. Avionics and Defence: DO-178C-compliant designs for fault tolerance. Medical Devices: Pacemakers or ventilators with precise timing. Industrial Automation: RTOS task visualisation via sequence diagrams. Tools like IBM Rhapsody support RTUML for model-based development and code generation in C/C++. == Criticism and adoption == RTUML’s complexity can overwhelm simple systems, and its use in agile environments is limited, where lightweight diagrams are preferred. Surveys indicate UML (including RTUML) is used in 30–50% of embedded projects, often for documentation rather than full model-driven engineering. It remains standard in academia and certified industries like aerospace.

  Read more →
• 

  Sprite (computer graphics)

  In computer graphics, a sprite is a two-dimensional bitmap that is integrated into a larger scene, most often in a 2D video game. Originally, the term sprite referred to fixed-sized objects composited together, by hardware, with a background. Use of the term has since become more general. Systems with hardware sprites include arcade video games of the 1970s and 1980s; game consoles including as the Atari VCS (1977), ColecoVision (1982), Famicom (1983), Genesis/Mega Drive (1988); and home computers such as the TI-99/4 (1979), Atari 8-bit computers (1979), Commodore 64 (1982), MSX (1983), Amiga (1985), and X68000 (1987). Hardware varies in the number of sprites supported, the size and colors of each sprite, and special effects such as scaling or reporting pixel-precise overlap. Hardware composition of sprites occurs as each scan line is prepared for the video output device, such as a cathode-ray tube, without involvement of the main CPU and without the need for a full-screen frame buffer. Sprites can be positioned or altered by setting attributes used during the hardware composition process. The number of sprites which can be displayed per scan line is often lower than the total number of sprites a system supports. For example, the Texas Instruments TMS9918 chip supports 32 sprites, but only four can appear on the same scan line. The CPUs in modern computers, video game consoles, and mobile devices are fast enough that bitmaps can be drawn into a frame buffer without special hardware assistance. Beyond that, GPUs can render vast numbers of scaled, rotated, anti-aliased, partially translucent, very high resolution images in parallel with the CPU. == Etymology == According to Karl Guttag, one of two engineers for the 1979 Texas Instruments TMS9918 video display processor, this use of the word sprite came from David Ackley, a manager at TI. It was also used by Danny Hillis at Texas Instruments in the late 1970s. The term was derived from the fact that sprites "float" on top of the background image without overwriting it, much like a ghost or mythological sprite. Some hardware manufacturers used different terms, especially before sprite became common: Player/Missile Graphics was a term used by Atari, Inc. for hardware sprites in the Atari 8-bit computers (1979) and Atari 5200 console (1982). The term reflects the use for both characters ("players") and smaller associated objects ("missiles") that share the same color. The earlier Atari Video Computer System and some Atari arcade games used player, missile, and ball. Stamp was used in some arcade hardware in the early 1980s, including Ms. Pac-Man. Movable Object Block, or MOB, was used in MOS Technology's graphics chip literature. Commodore, the main user of MOS chips and the owner of MOS for most of the chip maker's lifetime, instead used the term sprite for the Commodore 64. OBJs (short for objects) is used in the developer manuals for the NES, Super NES, and Game Boy. The region of video RAM used to store sprite attributes and coordinates is called OAM (Object Attribute Memory). This also applies to the Game Boy Advance and Nintendo DS. == History == === Arcade video games === The use of sprites originated with arcade video games. Nolan Bushnell came up with the original concept when he developed the first arcade video game, Computer Space (1971). Technical limitations made it difficult to adapt the early mainframe game Spacewar! (1962), which performed an entire screen refresh for every little movement, so he came up with a solution to the problem: controlling each individual game element with a dedicated transistor. The rockets were essentially hardwired bitmaps that moved around the screen independently of the background, an important innovation for producing screen images more efficiently and providing the basis for sprite graphics. The earliest video games to represent player characters as human player sprites were arcade sports video games, beginning with Taito's TV Basketball, released in April 1974 and licensed to Midway Manufacturing for release in North America. Designed by Tomohiro Nishikado, he wanted to move beyond simple Pong-style rectangles to character graphics, by rearranging the rectangle shapes into objects that look like basketball players and basketball hoops. Ramtek released another sports video game in October 1974, Baseball, which similarly displayed human-like characters. The Namco Galaxian arcade system board, for the 1979 arcade game Galaxian, displays animated, multi-colored sprites over a scrolling background. It became the basis for Nintendo's Radar Scope and Donkey Kong arcade hardware and home consoles such as the Nintendo Entertainment System. According to Steve Golson from General Computer Corporation, the term "stamp" was used instead of "sprite" at the time. === Home systems === Signetics devised the first chips capable of generating sprite graphics (referred to as objects by Signetics) for home systems. The Signetics 2636 video processors were first used in the 1978 1292 Advanced Programmable Video System and later in the 1979 Elektor TV Games Computer. The Atari VCS, released in 1977, has a hardware sprite implementation where five graphical objects can be moved independently of the game playfield. The term sprite was not in use at the time. The VCS's sprites are called movable objects in the programming manual, further identified as two players, two missiles, and one ball. These each consist of a single row of pixels that are displayed on a scan line. To produce a two-dimensional shape, the sprite's single-row bitmap is altered by software from one scan line to the next. The 1979 Atari 400 and 800 home computers have similar, but more elaborate, circuitry capable of moving eight single-color objects per scan line: four 8-bit wide players and four 2-bit wide missiles. Each is the full height of the display—a long, thin strip. DMA from a table in memory automatically sets the graphics pattern registers for each scan line. Hardware registers control the horizontal position of each player and missile. Vertical motion is achieved by moving the bitmap data within a player or missile's strip. The feature was called player/missile graphics by Atari. Texas Instruments developed the TMS9918 chip with sprite support for its 1979 TI-99/4 home computer. An updated version is used in the 1981 TI-99/4A. === In 2.5D and 3D games === Sprites remained popular with the rise of 2.5D games (those which recreate a 3D game space from a 2D map) in the late 1980s and early 1990s. A technique called billboarding allows 2.5D games to keep onscreen sprites rotated toward the player view at all times. Some 2.5D games, such as 1993's Doom, allow the same entity to be represented by different sprites depending on its rotation relative to the viewer, furthering the illusion of 3D. Fully 3D games usually present world objects as 3D models, but sprites are supported in some 3D game engines, such as GoldSrc and Unreal, and may be billboarded or locked to fixed orientations. Sprites remain useful for small details, particle effects, and other applications where the lack of a third dimension is not a major detriment. == Systems with hardware sprites == These are base hardware specs and do not include additional programming techniques, such as using raster interrupts to repurpose sprites mid-frame.

  Read more →
• 

  Webull

  Webull Corporation, often stylized as simply Webull, is a U.S.-based financial services holding company headquartered in St. Petersburg, Florida. It owns and operates the Webull electronic trading platform for self-directed retail investors. Depending on jurisdiction, the Webull platform offers trading in stocks, exchange-traded funds (ETFs), options, margin, bonds, cryptocurrency and futures, as well as market-data tools. Webull began operations in 2016 under Hunan Fumi Information Technology, a China-based financial technology company founded by Wang Anquan. It launched U.S. brokerage services through Webull Financial LLC in 2018 and expanded during the retail-trading boom of 2020 and 2021. In April 2025, Webull became a publicly traded company on the Nasdaq through a merger with special-purpose acquisition company SK Growth Opportunities Corporation. The company's U.S. brokerage revenue relies substantially on payment for order flow, with options trading accounting for the larger share of its order-flow rebates in 2025. Webull has faced regulatory actions related to options customer approvals, complaint handling, suspicious activity reporting, social-media marketing and customer disclosures. It has also faced scrutiny from U.S. lawmakers and state officials over its historical and operational ties to China and the handling of U.S. customer data. == History == === Founding === Webull was founded in 2016 under Hunan Fumi Information Technology, a China-based financial technology company, by Wang Anquan, a former employee of Alibaba Group and Xiaomi. Hunan Fumi Information Technology received backing from Xiaomi, Shunwei Capital, and other investors in China. Fumi Technology was a Hunan-based fintech start-up incubated by Xiaomi and raised about CNY200 million (approximately US$30 million) in a Series B financing round in 2018. On May 24, 2017, Webull Financial LLC was established as a Delaware limited liability company. It began offering brokerage services in the United States in May 2018. Wang hired Anthony Denier as CEO of the U.S. brokerage that year and the two mapped out their strategy on napkins at a Mexican restaurant in New York City. Webull Corporation was incorporated in the Cayman Islands in September 2019 as the group's holding company. === Retail trading boom === In May 2020, the company received SEC approval to launch a robo-advisor on its platform. By August 2020, the platform had over 11 million registered users, and in October 2020, it had 750,000 daily active users. Webull introduced options trading in 2020 and later added cryptocurrency trading through a separate digital-asset business. In November 2020, Webull began supporting cryptocurrency transactions. In December 2020, Webull launched trading services in Hong Kong. During the GameStop short squeeze in January 2021, Webull gained attention as some retail traders looked for alternatives to Robinhood. On January 27, 2021, Webull recorded its highest-ever number of active daily users, at 952,000, and the Webull app was downloaded across the Apple App and Google Play stores an estimated 100,000 times. That week, approximately 1.2 million people downloaded the Webull mobile app, which the company reported as a 1,548% week-over-week increase. On January 28, 2021, Webull was directed by its clearing house to temporarily halt buy orders for stocks affected by the GameStop short squeeze. In June 2021, Webull was reported to be considering a U.S. initial public offering that could raise up to $400 million. === Restructuring and expansion === Webull restructured its China-related corporate arrangements in 2022 and later stated that Hunan Fumi was no longer affiliated with the group. In 2022 and 2023, Webull expanded in several non-U.S. markets, including Singapore, Australia, South Africa, Japan, the United Kingdom and Indonesia. In June 2023, Webull moved cryptocurrency trading to a separate app called Webull Pay. By the end of 2023, Webull had 4.3 million funded accounts and US$8.2 billion in customer assets. In January 2024, Anthony Denier was promoted to group president of Webull Corporation. In November 2024, Webull launched overnight, or extended-hours, trading, expanding the trading window of U.S. stocks for users inside and outside the United States. === SPAC merger and Nasdaq listing === On February 28, 2024, Webull agreed to go public through a business combination with SK Growth Opportunities Corporation (NASDAQ: SKGR), a special-purpose acquisition company, in a deal that valued the company at approximately US$7.3 billion. The proposed valuation drew scrutiny because of Webull's limited financial disclosure at announcement, reliance on payment for order flow and small expected public float. SK Growth shareholders approved the business combination on March 30, 2025, and the transaction closed on April 10, 2025. Webull's Class A ordinary shares and warrants began trading on the Nasdaq on April 11, 2025 under the ticker symbols BULL and BULLW (incentive warrants traded under BULLZ until their redemption in June 2025). The merger brought Webull to the public market but generated little cash for the company: after shareholder redemptions, Webull disclosed net proceeds of US$430,066 from the transaction. After the listing, Webull's shares experienced extreme volatility, rising as much as 500% to US$79.56 on April 14, 2025, after closing at US$13.25 on the prior trading day. The initial post-listing surge increased the value of Webull holdings owned by earlier investors, including RIT Capital Partners, which had first invested in Webull in 2021. In April 2026, after Webull's shares had fallen about 70% over the previous year, the company authorized a US$100 million share repurchase program. == Business model and financials == Webull provides a self-directed electronic trading platform available through mobile, desktop and web applications. Depending on jurisdiction, the platform offers trading in stocks, exchange-traded funds, options, margin, futures, fixed income products, cryptocurrency, cash management features and market data tools. In the United States, Webull Financial LLC is a registered broker-dealer and member of FINRA and the Securities Investor Protection Corporation, while Webull operates in other markets through locally licensed brokerage subsidiaries. Webull operates a commission-free or low-cost brokerage model for self-directed retail investors. In the United States, a substantial part of its trading-related revenue comes from payment for order flow, while in some non-U.S. markets the company more commonly charges commissions directly to customers. The platform is aimed at more active retail investors, including users seeking options tools, extended-hours trading and real-time market data. For 2025, Webull reported total revenue of US$571.0 million, up from US$390.2 million in 2024. Equity and option order-flow rebates accounted for US$304.1 million, or 53.3% of revenue, making order-flow rebates the company's largest reported revenue category. Interest-related income accounted for US$154.3 million, handling charge income for US$87.3 million and other revenue for US$25.3 million. Options were the larger component of the company's order-flow rebates in 2025, generating US$210.0 million compared with US$94.2 million from equities. Webull also generates revenue from interest-related activities, including margin financing, customer bank deposits, stock lending and corporate bank deposits. The company has stated that its interest-related income is affected by interest rates, customer cash balances, margin balances and demand for stock lending. The company had approximately 20 million registered users worldwide as of February 2024. As of December 31, 2025, it reported 26.8 million registered users, 5.0 million funded accounts and US$24.6 billion in customer assets. As of March 2025, Webull operated in Hong Kong, Singapore, Australia, South Africa, Japan, the United Kingdom, the United States, Indonesia, Canada, Brazil, Thailand, Malaysia and Mexico. == Marketing and sponsorships == Webull has used paid digital advertising, referral incentives, free-stock promotions, affiliate marketing and sports sponsorships to acquire customers and promote its brand. In its 2025 annual filing, the company reported marketing and branding expenses of US$152.3 million in 2023, US$138.7 million in 2024 and US$135.9 million in 2025. Webull said most of its advertising and promotion costs were related to paid search and paid social advertising, and that it had reduced free-stock promotions while shifting toward deposit- and asset-transfer-based incentives. In September 2021, BSE Global, the parent company of the Brooklyn Nets and New York Liberty, entered into a global multi-year agreement with Webull. Under the agreement, Webull became an official sponsor and online brokerage partner of the teams, with branding that included a jersey patch on Brooklyn Nets uniforms. Spo

  Read more →
• 

  WomanStats Project

  The WomanStats Project is a donor-funded research and database project housed at Brigham Young University that "seeks to collect detailed statistical data on the status of women around the world, and to connect that data with data on the security of states." The WomanStats Database aims to provide a comprehensive compilation of information on the status of women in the world. Coders comb the extant literature and conduct expert interviews to find qualitative and quantitative information on over 300 indicators of women's status in 174 countries with populations of at least 200,000. Access to the online database is free. == History and structure == WomanStats began as an outgrowth of a paper Dr. Valerie M. Hudson (of the Brigham Young University Political Science department) and one of her graduate students, Andrea den Boer, published in International Security on the association between national security and the abnormal sex ratio in Asia. After the success and influence of their first article, (later added as one of their top twenty national security articles of that journal of all time), Hudson and den Boer did further research on the connection between the status of women and national security, but found that there was no single database that covered the range of topics that they needed for their research. Consequently, they began compiling information on variables regarding the status of women around the world. The database was officially formed in 2001 and grew exponentially as it later added more variables. The Project went live on the Internet in July 2007. The principal investigators are: Valerie M. Hudson (International Relations), Bonnie Ballif-Spanvill (Psychology, emeritus), and Chad F. Emmett (Geography) all from Brigham Young University, Mary Caprioli from the University of Minnesota, Duluth (International Relations), Rose McDermott from Brown University (International Relations), Andrea Den Boer from the University of Kent at Canterbury in the United Kingdom (International Relations) and S. Matthew Stearmer from the Ohio State University (Sociology; doctoral student). Approximately a dozen undergraduate and graduate students at Brigham Young University and Texas A&M University work at any one time as coders for the project. The coders take the raw quantitative and qualitative data collected in government reports, news articles, research papers, etc. and sort the applicable information on women into categories. They may also implement scales developed by the principal investigators, or that they (the students) themselves have developed. == Database == As of February 2011, the database has 307 variables, covers 174 nations with populations over 200,000, uses 18,015 sources and contains over 111,000 individual data points. All data is referenced to original sources. Not every variable has information for each country; similarly, not all countries have information for each variable: overall, about 70% of country-variable combinations have information. These database coding gaps exist where information is not available or is incomplete, or variables are not collected and reported by governments or international organizations. At times, information from different sources may be contradictory, and the WomanStats Database records this discrepant information for triangulation purposes. == Users and role of the database == The database is meant to help fill a hole in the extant data on the situation of women around the world. WomanStats data and research has been vetted and/or used by the United Nations, the United States Department of Defense, the Central Intelligence Agency, and the World Bank. Their data and research were also used by the United States Senate Committee on Foreign Relations in crafting the International Violence Against Women’s Act. The Inter-Agency Network on Women and Gender Equality (IANWGE) of the United Nations has stated that the WomanStats project "filled a major gap in the availability of data on women" (2007). Victor Asal and Mitchell Brown, researchers not affiliated with WomanStats, stated in an article published in Politics and Policy that "one of the most significant challenges of cross-national empirical studies of the prevalence of interpersonal violence is the paucity of available data, particularly reliable data," and that "WomanStats has allowed for an important first glimpse at analyzing the factors related to interpersonal violence." They conclude by stating that "Our findings suggest that, in the same way that larger disciplinary resources have invested in interstate and intrastate war, disciplinary resources need to be expended in creating a data set exploring interpersonal violence. Until the rights and the lives of women and children are taken as seriously as the survival of states by more proactively collaborating on projects like WomanStats, we will continue to only have a small lens through which to understand problems like this." Princeton University professor Evan S. Liberman wrote, "Although data on political regimes and group conflict have been in far greater demand by political scientists than data on gender politics and policies, two gender-related databases provide...examples of innovative HIRDs. Both the Womanstats database project (Hudson et al. 2009) and the Research Network on Gender Politics and the State (RNGS) project (McBride et al. 2008) are well-integrated presentations of quantitative and qualitative data characterizing the quality of gender relations around the world and, in particular, analytic descriptions of the treatment of women."." == Research == The research component of WomanStats focuses on exploring the relationship between the situation of women and the behavior and security of states. Current research initiatives include: Exploring the relationship between violent instability and inequity and family law. Examining the effect of polygyny and marriage market dislocations on the rise of suicide terrorism. Documenting discrepancies between laws on the books and cultural practices on the ground concerning gender issues. Investigating how well the situation of women predicts the peacefulness of nations-states, compared to their variables such as democracy, wealth, and civilization. The Project has published articles in International Security, International Studies Quarterly, Peace and Conflict, Journal of Peace Research, Political Psychology, Cumberland Law Review, and World Political Review, and has a forthcoming book from Columbia University Press.

  Read more →
• 

  SCADA Strangelove

  SCADA Strangelove is an independent group of information security researchers founded in 2012, focused on security assessment of industrial control systems (ICS) and SCADA. == Activities == Main fields of research include: Discovery of 0-day vulnerabilities in cyber physical systems and coordinated vulnerability disclosure; Security assessment of ICS protocols and development suites; Identification of publicly Internet-connected ICS components and secure it with help of proper authorities; Development of security hardening guides for ICS software; Mapping cybersecurity on to functional safety; Awareness control and delivery of information regarding the actual security state of ICS systems. SCADA Strangelove's interests expand further than classic ICS components and covers various embedded systems, however, and encompass smart home components, solar panels, wind turbines, SmartGrid as well as other areas. == Projects == Group members have and continue to develop and publish numerous open source tools for scanning, fingerprinting, security evaluation and password bruteforcing for ICS devices. These devices work over industrial protocols such as modbus, Siemens S7, MMS, ISO EC 60870, ProfiNet. In 2014 Shodan used some of the published tools for building a map of ICS devices which is publicly available on the Internet. Open source security assessment frameworks, such as THC Hydra, Metasploit, and DigitalBond Redpoint have used Shodan-developed tools and techniques. The group has published security-hardening guidelines for industrial solutions based on Siemens SIMATIC WinCC and WinCC Flexible. The guidelines contain detailed security configuration walk-throughs, descriptions of internal security features and appropriate best practices. Among the group’s more noticeable projects is Choo Choo PWN (CCP) also named the Critical Infrastructure Attack (CIA). This is an interactive laboratory built upon ICS software and hardware used in real world. Every system is connected to a toy city infrastructure, which includes factories, railroads and other facilities. The laboratory has been demonstrated at various conferences including PHDays, Power of Community, and 30C3. Primarily the laboratory is used for the discovery of new vulnerabilities and for evaluation of security mechanisms, however it is also used for workshops and other educational activities. At Positive Hack Days IV, contestants found several 0-day vulnerabilities in Indusoft Web Studio 7.1 by Schneider Electric, and in specific ICS hardware RTU PET-7000 during the ICS vulnerability discovery challenge. The group supports Secure Open SmartGrid (SCADASOS) project to find and fix vulnerabilities in intellectual power grid components such as photovoltaic power station, wind turbine, power inverter. More than 80 000 industrial devices were discovered and isolated from the Internet in 2015. == Appearances == Group members are frequently seen presenting at conferences like CCC, SCADA Security Scientific Symposium, Positive Hack Days. Most notable talks are: === 29C3 === An overview of vulnerabilities discovered in the widely distributed Siemens SIMATIC WinCC software and tools that are implemented for searching ICS on the Internet. === PHDays === This talk consisted of an overview of vulnerabilities discovered in various systems produced by ABB, Emerson, Honeywell and Siemens and was presented at PHDays III and PHDays IV. === Confidence 2014 === Implications of security research aimed at realization of various industrial network protocols Profinet, Modbus, DNP3, IEC 61850-8-1 (MMS), IEC (International Electrotechnical Commission) 61870-5-101/104, FTE (Fault Tolerant Ethernet), Siemens S7. === PacSec 2014 === Presentations of security research showing the impact of radio and 3G/4G networks on the security of mobile devices as well as on industrial equipment. === 31C3 === Analysis of security architecture and implementation of the most wide spread platforms for wind and solar energy generation which produce many gigawatts of it. === 32C3 === Cybersecurity assessment of railway signaling systems such as Automatic Train Control (ATC), Computer-based interlocking (CBI) and European Train Control System (ETCS). === China Internet Security Conference 2016 === In "Greater China Cyber Threat Landscape" keynote by Sergey Gordeychik an overview of vulnerabilities, attacks and cyber-security incidents in Greater China region was presented. === Recon 2017 === In talk "Hopeless: Relay Protection for Substation Automation" by Kirill Nesterov and Alexander Tlyapov security analysis results of key Digital Substation component - Relay Protection Terminals was presented. Vulnerabilities, including remote code execution in Siemens SIPROTEC, General Electric Line Distance Relay, NARI and ABB protective relays was presented. == Philosophy == All names, catchwords and graphical elements refer to Stanley Kubrick’s film, Dr. Strangelove. In their talks, group members often refer to Cold War events such as the Caribbean Crisis, and draw parallels between nuclear arms race and the current escalation of cyberwar. Group members follow the approach of “responsible disclosure” and “ready to wait for years, while vendor is patching the vulnerability”. Public exploits for discovered vulnerabilities are not published. This is on account of the longevity of ICS and by implication the long process of patching ICS. However, conflicts still happen, notably in 2012 when the talk at DEF CON was called off due to a dispute of persistent weaknesses in Siemens industrial software.

  Read more →
• 

  Texture artist

  A texture artist is an individual who develops textures for digital media, usually for video games, movies, web sites and television shows or things like 3D posters. These textures can be in the form of 2D or (rarely) 3D art that may be overlaid onto a polygon mesh to create a realistic 3D model. Texture artists often take advantage of web sites for the purposes of marketing their art and self-promotion of their skills with the goal of gaining employment from a professional game studio or to join a team working on a "mod" (modification) of an existing game in hopes of establishing industry or trade credentials.

  Read more →
• 

  Elasticity (data store)

  The elasticity of a data store relates to the flexibility of its data model and clustering capabilities. The greater the number of data model changes that can be tolerated, and the more easily the clustering can be managed, the more elastic the data store is considered to be. == Types == === Clustering elasticity === Clustering elasticity is the ease of adding or removing nodes from the distributed data store. Usually, this is a difficult and delicate task to be done by an expert in a relational database system. Some NoSQL data stores, like Apache Cassandra have an easy solution, and a node can be added/removed with a few changes in the properties and by adding specifying at least one seed. === Data-modelling elasticity === Relational databases are most often very inelastic, as they have a predefined data model that can only be adapted through redesign. Most NoSQL data stores, however, do not have a fixed schema. Each row can have a different number and even different type of columns. Concerning the data store, modifications in the schema are no problem. This makes this kind of data stores more elastic concerning the data model. The drawback is that the programmer has to take into account that the data model may change over time.

  Read more →
• 

  Period-tracking app

  Period-tracking apps are mobile applications used to track the menstrual cycle. They may be used to predict menstruation, to plan fertility, and to track health. Examples include Clue, Glow, and Flo. == Function == Users enter their dates of menstruation, and frequently other experiences such as vaginal discharge and spotting; premenstrual syndrome; changes in mood; menstrual cramps and other pain; and other symptoms such as appetite changes, bloating, and acne. The apps predict the date of users' next period, and often also their ovulation and fertile window. Some apps have additional features such as contraceptive reminders, educational content, tracking modes for use during pregnancy, or the ability to share one's menstrual cycle data with a partner. == Privacy == Period-tracking apps collect personal health data, potentially raising concerns about privacy. Researchers have warned that data may be transferred to third parties and used for consumer profiling and targeted advertising, used for employment and health insurance discrimination, or used to prosecute users for seeking abortions. After the 2022 decision by the United States Supreme Court to overturn Roe v. Wade, and the bans and restrictions on abortion in many US states that followed, many American women uninstalled the apps amidst fear that the data could be accessed by law enforcement and used to prosecute users. WIRED published a ranking of several period-tracking apps by data privacy.

  Read more →
• 

  Affinity (software)

  Affinity is a graphics editor developed by Serif, a subsidiary of Canva. It is simultaneously a vector graphics editor, a raster graphics editor and a desktop publishing application. It was first released in 2025 as a successor to Serif's Affinity Designer, Affinity Photo and Affinity Publisher, uniting the three editors into one application. While the previous versions competed individually against Adobe's Illustrator, Photoshop, and InDesign, Affinity 3.0 integrates their functionality into a single application. It uses a freemium model monetized by AI features exclusive to Canva Pro subscribers. == Functionality == Affinity is divided into a number of workspaces ("studios"), which are equivalent to the previous suite of Affinity applications: "vector" for vector graphics (Designer), "pixel" for raster editing (Photo), and "layout" for desktop publishing (Publisher). Additionally, it introduces the ability to create custom workspaces. The application supports real-time previews and non-destructive editing, which are based on GPU acceleration. Supported file formats include Adobe Photoshop, InDesign and Illustrator files, PDF, SVG, and TIFF, as well as a custom .af file format. === Vector editing === === Raster editing === Affinity includes photo editing tools including adjustments, masks, blend modes, batch processing, and retouching facilities. Additionally, the application can develop RAW files, similar to Adobe Lightroom. === Desktop publishing === Publishing features include master pages, text styles, and advanced typography. === AI features === The application supports Canva's existing AI features, such as background removal and generative fill. This requires a Canva subscription. == Development == === Background and acquisition (2014–2024) === Serif launched the original Affinity suite starting with Affinity Designer in 2014, followed by Photo (2015) and Publisher (2019). The software gained popularity for its one-time purchase model, contrasting with Adobe's subscription-based Creative Cloud. In November 2022, Serif released Version 2 of the suite, introducing a "Universal License" that covered all three apps across all platforms. In March 2024, Canva acquired Serif for approximately A$580 million (£300 million). Following user backlash regarding a potential shift to subscriptions, Canva and Serif issued a joint "Pledge" committing to four key principles: fair pricing, no mandatory subscriptions, perpetual licenses for existing products, and continued development of Affinity as a standalone suite. === Unified release (2025) === In September 2025, Serif pulled all existing versions of Affinity Designer, Affinity Photo and Affinity Publisher from sale ahead an upcoming announcement on 30 October; also ahead of the announcement, the iPadOS versions of the Affinity suite became free on App Store. During a "Creative Freedom" keynote on 30 October 2025, Canva released a new version now simply branded as "Affinity" (also known as "Affinity by Canva"), and referred to internally as version 3.0. Version 3 drops the separate applications and integrates their functionality into a singular application, and adds the ability to export directly to the Canva platform. It also adds a Canva AI studio, including background removal, "Expand & Edit", and generative fill. As of version 3, Affinity has switched to a freemium model; it is now available at no charge to users, although access to Canva AI features are locked behind the existing Canva Pro subscription service. Serif stated that the perpetually-licensed version 2 will remain available to existing owners, although it will no longer be actively maintained. The new version is currently available for macOS and Windows only, with an iPadOS version to be released soon. == Reception == The change in business model by Canva in 2025 was met with mixed reception, including concerns about its incorporation of AI features. Some users were concerned that their projects would be used for machine learning purposes, or that future versions would suffer from a lack of maintenance or become adware. Additionally, some felt it turned Affinity into fundamentally subscription-based software, given the prevalence of these features in professional contexts. Affinity publicly stated on social media that it would remain "free forever", users' projects would not be used to train AI models, and that "Canva has built a sustainable business model that allows this kind of generosity. And when more professionals use Affinity, Canva can sell more seats into businesses."

  Read more →
• 

  Glow (app)

  Glow is a fertility awareness and period-tracking app. It is part of a suite of mobile apps focused on women's reproductive health and childcare, which includes Eve by Glow (a dedicated period tracker), Glow Nurture (a pregnancy tracker), and Glow Baby (a baby development tracker). The Glow company also operates an online shop that sells several fertility-related products, including ovulation test strips, pregnancy tests, and wearable breast pumps. In 2024, Glow was reported to have approximately 25 million users across its various apps and community message boards. == History == Glow debuted in August 2013 as an iOS app. It was founded by Michael Huang and Max Levchin and launched with $6 million in Series A funding from venture capital firms Founders Fund and Andreesen Horowitz. In 2014, Glow raised an additional $17 million in Series B funding, with Formation 8 joining existing investors. In 2015, Glow launched Ruby, an app dedicated to sexual health. That year, Wired reported that the company had added features to their apps allowing men to monitor their fertility. Glow subsequently released an additional set of apps focused on pregnancy tracking and infant development. In 2016, Glow reported that it had a total of approximately 3 million users; by 2018, this had grown to 15 million. Vox described it as one of the “big two” period and fertility tracking apps and the one that had started the “boom” in the femtech space. == Application and features == Glow was initially described as a fertility application that applied data-driven methods to menstrual and ovulation tracking. Core features include cycle logging, ovulation prediction, and symptom tracking. The app also provides educational content related to reproductive health and childcare, as well as a set of online message boards that allow individuals to share experiences and seek peer support. == Privacy and legal issues == Glow has received significant media attention for its privacy and security practices. In 2016, Consumer Reports identified potential exploits in the Glow app that they claimed could have exposed private user data to hackers. Glow subsequently reported that it had fixed the vulnerabilities and told The Washington Post they had no evidence that user data had been compromised. In September 2020, the California Attorney General announced a settlement with Glow related to Consumer Reports’ findings, which included a $250,000 civil penalty. Following the US Supreme Court's 2022 Dobbs v. Jackson ruling, which legalized state-level bans on abortion, Glow (and other fertility trackers, such as Clue and Flo) came under additional scrutiny over concerns that user data on abortions could be reported to law enforcement. After this surge of media interest, a research team affiliated with the University of New South Wales conducted an investigation into the privacy practices of several popular fertility apps, including Glow. Their review of Glow was mixed, noting that they provided several privacy settings and de-identified sensitive data, but that user information could still be disclosed in the future if the app was sold. Glow rejected that claim, telling the Australian Associated Press that it "did not share" personal data. The company also cited several internal security measures it had implemented and its apps' offline data protection setting, which allows users to permanently delete their health-related data. == Reception == In 2014, Fast Company reported that 20,000 women had used Glow to conceive. Later that year, The Guardian included Glow Nurture on its list of the best iPhone apps of 2014. Media coverage often praised Glow's array of menstrual tracking options, although some reviews also noted that fertility apps are not birth control tools and cautioned against relying on them for that purpose. In 2019, Cosmopolitan singled Glow's community of users as one of its standout features.

  Read more →
• 

  Micro stuttering

  Micro stuttering is a visual artifact in real-time computer graphics in which the time intervals between consecutively displayed frames are uneven, even though the average frame rate reported by benchmarking software appears adequate. Tools such as 3DMark typically compute frame rates over intervals of one second or more, which can conceal momentary drops in the instantaneous frame rate that the viewer perceives as hitching or jerking of on-screen motion. At low frame rates the effect is visible as a stutter in moving images, degrading the experience in interactive applications such as video games. In severe cases a lower but more consistent frame rate can appear smoother than a higher but more erratic one. The term gained prominence in the late 2000s in discussions of multi-GPU rendering (see History), but micro stuttering also affects single-GPU systems. Common causes on modern hardware include real-time shader compilation, asset streaming from storage, VRAM exhaustion, and driver bugs. == Causes == === Shader compilation === A common cause of micro stuttering on modern PCs is real-time shader compilation. Shaders are small programs that instruct the GPU on how to render visual effects such as lighting, shadows, and reflections. On consoles, developers can pre-compile all shaders for the known, fixed hardware. On PCs, the variety of GPU architectures means shaders must often be compiled at run time, either when the game launches or during gameplay itself. When the rendering engine encounters a shader that has not yet been compiled, the CPU must finish the compilation before the GPU can draw the affected object. This causes a spike in frame time that the player perceives as a hitch. The problem has been particularly associated with games built on Unreal Engine 4 running under DirectX 12, because DX12 shifts more shader management responsibility to the application. Several techniques exist to reduce shader compilation stutter. Pipeline State Object (PSO) pre-caching records the shader permutations used at runtime so that they can be compiled in advance on subsequent launches. Asynchronous shader compilation moves the work to background CPU threads to avoid blocking the main rendering thread. Platform-level services such as Steam's shader pre-caching distribute previously compiled shaders to users with matching GPU hardware. The Steam Deck, which contains a single fixed GPU, benefits from pre-compiled shader caches because all units share the same hardware configuration. === Other causes === Micro stuttering on single-GPU systems can have several additional causes. CPU bottlenecks or scheduling interruptions from background tasks can prevent the processor from preparing frames at regular intervals. Asset streaming during gameplay (loading textures, geometry, or audio from storage) can produce hitches sometimes called traversal stutter; the use of solid-state drives and technologies such as DirectStorage has reduced but not eliminated this. VRAM exhaustion forces data to be swapped between video memory and system memory over the PCI Express bus, which is slower. Graphics driver bugs can also introduce stutter; Nvidia released hotfix driver 551.46 in February 2024 to correct intermittent micro stuttering when V-Sync was enabled. == Measurement == Micro stuttering drew attention to the limitations of average frame rate as a performance metric. In 2013, Scott Wasson at The Tech Report published a series of articles advocating frame time analysis, in which the delivery time of every individual frame is recorded and plotted rather than collapsed into a single frames-per-second figure. This approach was adopted by other hardware review publications in the following years. GPU reviews now routinely report 1% low and 0.1% low frame rates alongside the average. The 1% low is the average frame rate of the slowest 1% of frames in a sample; it serves as an indicator of worst-case smoothness. A large gap between the average and the 1% low suggests poor frame pacing. Tools for capturing per-frame timing data include FRAPS, PresentMon, OCAT, CapFrameX, and MSI Afterburner with RivaTuner Statistics Server. == Mitigation == === Frame pacing === Frame pacing is a software technique that regulates the timing of frame delivery to produce even intervals between displayed frames. Game engines, GPU drivers, and platform libraries all implement frame pacing strategies to varying degrees. On mobile platforms, Google provides the Android Frame Pacing library (Swappy) as part of the Android Game Development Kit. In December 2025, the Khronos Group published the VK_EXT_present_timing Vulkan extension, giving developers explicit control over presentation timing in a cross-platform graphics API for the first time. === Variable refresh rate === Variable refresh rate (VRR) display technologies allow a monitor's refresh rate to change to match the GPU's frame output. Implementations include Nvidia G-Sync (2013), AMD FreeSync (2015), and the VESA Adaptive-Sync standard built into DisplayPort 1.2a and later. VRR eliminates the screen tearing that results from a mismatch between frame rate and refresh rate, and avoids the frame-holding behaviour of V-Sync that can itself cause stutter. It is effective at smoothing moderate frame rate fluctuations but cannot compensate for large sudden spikes in frame time such as those caused by shader compilation or heavy asset streaming. VRR support has become standard in gaming monitors, televisions (via HDMI 2.1), and the Xbox Series X/S and PlayStation 5 consoles. === Frame generation === Beginning with DLSS 3 on the GeForce RTX 40 series in 2022, Nvidia introduced AI-based frame generation, which uses dedicated optical flow hardware and a neural network to create new frames between traditionally rendered ones. AMD followed with FSR 3 in 2023, using an algorithmic approach, and the AI-based FSR 4 for the Radeon RX 9000 series in 2025. DLSS 4, released in January 2025 for the GeForce RTX 50 series, can generate up to three frames per rendered frame using a technique called Multi Frame Generation. Frame generation increases the displayed frame rate but introduces its own frame pacing concerns. If the underlying rendered frames are unevenly timed, the interpolated frames can make the unevenness more apparent rather than less. DLSS 4 addresses this with hardware-level flip metering on the GPU's display engine, which controls the timing of frame presentation more precisely than the CPU-based pacing used in DLSS 3. Both vendors pair frame generation with latency-reduction features (Nvidia Reflex and AMD Anti-Lag+) to offset the additional input latency that results from inserting synthetic frames into the pipeline. === Frame rate limiters === Capping the frame rate below the display's maximum refresh rate, using tools such as RivaTuner Statistics Server, in-game limiters, or driver-level settings, is a common way to improve frame pacing. Preventing the GPU from running ahead of the display reduces variability in frame delivery times and can produce a smoother result than an uncapped but more irregular frame rate. == History == === Multi-GPU configurations === Micro stuttering was first widely documented in the late 2000s as a side effect of multi-GPU configurations using Alternate Frame Rendering (AFR), in which consecutive frames are assigned to alternating GPUs. Because each GPU may take a different amount of time to complete its assigned frame — due to varying scene complexity, driver scheduling, or inter-GPU communication overhead — the resulting frame delivery is irregular even when the average frame rate is high. Both Nvidia SLI and AMD CrossFireX were affected, with dual-GPU setups exhibiting the worst frame pacing irregularities. In 2012 benchmarks using Battlefield 3, dual Radeon HD 7970 cards in CrossFire showed 85% variation in frame delivery times compared with 7% for a single card, while dual GeForce GTX 680 cards in SLI showed only 7% variation compared with 5% for a single card. Multi-GPU micro stuttering became a significant factor in the eventual decline and discontinuation of consumer multi-GPU gaming. Nvidia restricted SLI to a handful of enthusiast-class cards from the GeForce 10 series onward, then replaced it with NVLink on the GeForce RTX 20 series, which saw limited gaming adoption. AMD ceased active CrossFire development around 2017. By the mid-2020s, neither vendor's current consumer GPUs support multi-GPU rendering for games. Other factors that contributed to the decline include DirectX 12 placing multi-GPU support in the hands of game developers rather than driver authors, the incompatibility of temporal anti-aliasing and other temporal rendering techniques with AFR, and the increasing size, power draw, and cost of individual GPUs. The third-party utility RadeonPro could reduce CrossFire micro stuttering through dynamic V-Sync and frame pacing adjustments, and AMD later introduced a driver-level frame paci

  Read more →