AI For Business Writing

AI For Business Writing — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Supermind AI

  Supermind is a state-funded Chinese artificial intelligence platform that tracks scientists and researchers internationally. The platform is the flagship project of Shenzhen's International Science and Technology Information Center. It mines data from science and technology databases such as Springer, Wiley, Clarivate and Elsevier. It is intended to detect technological breakthroughs and to identify possible sources of talent as part of China's efforts to advance technologically. The platform also uses government data security and security intelligence organizations such as Peng Cheng Laboratory, the China National GeneBank, BGI Group and the Key Laboratory of New Technologies of Security Intelligence. According to Hong Kong-based Asia Times, the platform, "While not an overt espionage tool...may be used to identify key personnel who could be bribed, deceived or manipulated into divulging classified information". The Organisation for Economic Co-operation and Development (OECD) flagged the project as an incident, meaning it may be of interest to policymakers and other stakeholders. US technology group American Edge Project criticized the project as a global risk of China's security services using the platform to place agents in jobs with access to important information, recruit technical personnel, and identify targets for hacking operations.

  Read more →
• 

  Bitstrips

  Bitstrips, Inc. was a Canadian media and technology company based in Toronto, founded in 2007 by Jacob Blackstock, David Kennedy, Shahan Panth, Dorian Baldwin, and Jesse Brown. The company created and offered a web application, Bitstrips.com, which allowed users to create comic strips using personalized avatars, and preset templates and poses. Brown and Blackstock explained that the service was meant to enable self-expression without the need to have artistic skills. Bitstrips was first presented in 2008 at South by Southwest in Austin, Texas, and the service later piloted and launched a version designed for use as educational software. The service achieved increasing prominence following the launch of versions for Facebook and mobile platforms. In 2014, Bitstrips launched a spin-off app known as Bitmoji, which allows users to create personalized stickers for use in instant messaging. In July 2016, Snapchat Inc. announced that it had acquired the company; the Bitstrips comic service was shut down, but Bitmoji remains operational, and has subsequently been given greater prominence within Snapchat's overall platform. == History == Bitstrips was co-developed by Toronto-based comic artist Jacob Blackstock and his high school friend, journalist Jesse Brown. The service was originally envisioned as a means to allow anyone to create their own comic strip without needing artistic skills. Brown explained that "it's so difficult and time-consuming to tell a story in comic book form, drawing the same characters again and again in these tiny little panels, and just the amount of craftsmanship required. And even if you can do it well, which I never could, it takes years to make a story." Brown stated that the service would be "groundwork for a whole new way to communicate", and went as far as describing the service as being a "YouTube for comics". Blackstock explained that the concept of Bitstrips was influenced by his own use of comics as a form of socialization; a student, Blackstock and his friends drew comics featuring each other and shared them during classes. He felt that Bitstrips was a "medium for self-expression", stating that "It's not just about you making the comics, but since you and your friends star in these comics, it's like you're the medium. The visual nature of comics just speaks so much louder than text." The service was publicly unveiled at South by Southwest in 2008. In 2009, the service introduced a version oriented towards the educational market, Bitstrips for Schools, which was initially piloted at a number of schools in Ontario. The service was praised by educators for being engaging to students, especially within language classes. Brown noted that students were using the service to create comics outside of class as well, stating that it was "so gratifying and shocking what people do with your tool to make their own stories in ways that you never would have anticipated. Some of them are just brilliant." In December 2012, Bitstrips launched a version for Facebook; by July 2013, Bitstrips had 10 million unique users on Facebook, having created over 50 million comics. In October 2013, Bitstrips launched a mobile app; in two months, Bitstrips became a top-downloaded app in 40 countries, and over 30 million avatars had been created with it. In November 2013, Bitstrips secured a round of funding from Horizons Ventures and Li Ka-shing. In October 2014, Bitstrips launched Bitmoji, a spin-off app that allows users to create stickers featuring Bitstrips characters in various templates. In July 2016, following unconfirmed reports earlier in the year, Snapchat Inc. announced that it had acquired Bitstrips. The company's staff continue to operate out of Toronto, but the original Bitstrips comic service was shut down in favour of focusing exclusively on Bitmoji, leaving many Bitstrips users to call for a reboot of the comic service.

  Read more →
• 

  Optical granulometry

  Optical granulometry is the process of measuring the different grain sizes in a granular material, based on a photograph. Technology has been created to analyze a photograph and create statistics based on what the picture portrays. This information is vital in maintaining machinery in various trades worldwide. Mining companies can use optical granulometry to analyze inactive or moving rock to quantify the size of these fragments. Forestry companies can zero in on wood chip sizes without stopping the production process, and minimize sizing errors. With more photoanalysis technologies being produced, mining companies have shown an increased interest in these types of systems because of their ability to maintain efficiency throughout the mining process. Companies are saving millions of dollars annually because of this new technology, and are cutting back on maintenance costs on equipment. In order for optical granulometry to be completely successful, an accurate photo must be taken – under sufficient lighting, and using proper technology – to obtain quantified results. If these requirements are met, an image analysis system can be implemented. == The process == Software uses four basic steps in determining the average size of material: See the Wikipedia article on Photoanalysis to see how mining, forestry and agricultural companies are using this technology to improve quality control techniques. == Smartphone-based, segmentation-free estimation of grain size distribution == Recently, a methodology has emerged by which soil grain size distribution can be inferred from optical images acquired with commodity smartphones by training convolutional neural networks to predict parameters of the distribution curve directly from the image, without explicit image segmentation . In this approach, a standardized image of a soil surface is captured under controlled conditions, preprocessed to reduce device-specific variability, and passed to a regression model that outputs the parameters of a cumulative distribution function e.g., a two-parameter Weibull curve. The resulting distribution can be used to derive geotechnical descriptors and class boundaries.

  Read more →
• 

  Manual override

  A manual override (MO) or manual analog override (MAO) is a mechanism where control is taken from an automated system and given to the user. For example, a manual override in photography refers to the ability for the human photographer to turn off the automatic aperture sizing, automatic focusing, or any other automated system on the camera. Some manual overrides can be used to veto an automated system's judgment when the system is in error. An example of this is a printer's ink level detection: in one case, a researcher found that when he overrode the system, up to 38% more pages could be printed at good quality by the printer than the automated system would have allowed. Automated systems are becoming increasingly common and integrated into everyday objects such as automobiles and domestic appliances. This development of ubiquitous computing raises general issues of policy and law about the need for manual overrides for matters of great importance such as life-threatening situations and major economic decisions. The loyalty of such autonomous devices then becomes an issue. If they follow rules installed by the manufacturer or required by law and refuse to cede control in some situations then the owners of the devices may feel disempowered, alienated and lacking true ownership. == Major incidents == China Airlines Flight 140 crashed, causing many deaths, due to a misunderstanding about the manual overrides for the autopilot. The Take-Off/Go Around system had been activated to abort a landing. It was programmed to ignore manual controls in this situation but the human pilots tried to continue the landing. The conflicting control signals from the pilots and autopilot then resulted in the aircraft stalling and crashing. The autopilot for this aircraft type was then reprogrammed so that it would never ignore a manual override.

  Read more →
• 

  Z-order

  Z-order is an ordering of overlapping two-dimensional objects, such as windows in a stacking window manager, shapes in a vector graphics editor, or objects in a 3D application. One of the features of a typical GUI is that windows may overlap, so that one window hides part or all of another. When two windows overlap, their Z-order determines which one appears on top of the other. == Definition == The term "Z-order" refers to the order of objects along the Z-axis. In coordinate geometry, X typically refers to the horizontal axis (left to right), Y to the vertical axis (up and down), and Z refers to the axis perpendicular to the other two (forward or backward). One can think of the windows in a GUI as a series of planes parallel to the surface of the monitor. The windows are therefore stacked along the Z-axis, and the Z-order information thus specifies the front-to-back ordering of the windows on the screen. An analogy would be some sheets of paper scattered on top of a table, each sheet being a window, the table your computer screen, and the top sheet having the highest Z value. == Use == Typically, users of a GUI can affect the Z-order by selecting a window to be brought to the foreground (that is, "above" or "in front of" all the other windows). Some window managers allow interaction with windows while they are not in the foreground, while others will bring a window to the front whenever it receives input from the user. It is also possible for special windows to be designated "always on top"; these are then fixed to the top of the Z-order so that (with few exceptions) no other window can overlap them. When dealing with visual objects on a computer screen, an object with a Z-order of 1 would be visually "underneath" an object with a Z-order of 2 or greater. This is the same as making "layers" of objects where the Z-order determines what object is on top of another. An HTML page can use CSS to specify the Z-order so that some objects can be layered over others. Z-ordering is also used in 3D applications to determine object visibility based on overlap from other objects. This confers a speed advantage to the user as the computer does not need to render unseen objects. In practice, of course, some objects may be only partially obscured, and this is a complication that must be taken into account. In early real-time 3D graphics, Z-order was applied on a per-polygon basis to avoid using Z-buffer, which was considered expensive at the time. In modern 3D graphics, Z-order is used for order-dependent rendering, for example with semi-transparent objects. It can also be used to reduce the problem of Z-fighting, by either rendering farther objects first and then using weak inequality as the depth test or, conversely, rendering front-to-back and using strict inequality. == z-index == The actual number assigned to a particular place in the Z-order is sometimes known as the z-index. In particular the CSS property that sets the stack order of specific elements is known as the z-index. An element with greater stack order is always in front of another element with lower stack order. Negative values can also be used in the same manner. A negative value will appear behind a positive one. z-index only works on elements that have a position value (e.g. position: relative;) and for many coders, this one of the first things to investigate when debugging why the z-index isn't working. Like all other CSS properties, it can be set with JavaScript, with the following syntax:

  Read more →
• 

  Piranesi (software)

  Piranesi is an interactive paint system that enables the user to create artistic images from 3D scenes created using conventional modeling applications. == Image format == Piranesi uses the proprietary EPix file format. For every pixel, additional information is stored, such as distance from the viewer and material settings. EPix files can be rendered from 3D scenes using a fixed viewpoint by Piranesi's companion software, Vedute.

  Read more →
• 

  Glossary of robotics

  Robotics is the branch of technology that deals with the design, construction, operation, structural disposition, manufacture and application of robots. Robotics is related to the sciences of electronics, engineering, mechanics, and software. The following is a list of common definitions related to the Robotics field. == A == Actuator: a motor that translates control signals into mechanical movement. The control signals are usually electrical but may, more rarely, be pneumatic or hydraulic. The power supply may likewise be any of these. It is common for electrical control to be used to modulate a high-power pneumatic or hydraulic motor. Aerobot: a robot capable of independent flight on other planets. A type of aerial robot. Arduino: The current platform of choice for small-scale robotic experimentation and physical computing. Artificial intelligence: is the intelligence of machines and the branch of computer science that aims to create it. Aura (satellite): a robotic spacecraft launched by NASA in 2004 which collects atmospheric data from Earth. Automaton: an early self-operating robot, performing exactly the same actions, over and over. Autonomous vehicle: a vehicle equipped with an autopilot system, which is capable of driving from one point to another without input from a human operator. == B == Biomimetic: See Bionics. Bionics: also known as biomimetics, biognosis, biomimicry, or bionical creativity engineering is the application of biological methods and systems found in nature to the study and design of engineering systems and modern technology. == C == CAD/CAM (computer-aided design and computer-aided manufacturing): These systems and their data may be integrated into robotic operations. Čapek, Karel: Czech author who coined the term 'robot' in his 1921 play, Rossum's Universal Robots. Chandra X-ray Observatory: a robotic spacecraft launched by NASA in 1999 to collect astronomical data. Cloud robotics: robots empowered with more capacity and intelligence from cloud. Combat, robot: a hobby or sport event where two or more robots fight in an arena to disable each other. This has developed from a hobby in the 1990s to several TV series worldwide. Cruise missile: a robot-controlled guided missile that carries an explosive payload. Cyborg: also known as a cybernetic organism, a being with both biological and artificial (e.g. electronic, mechanical or robotic) parts. == D == Degrees of freedom: the extent to which a robot can move itself; expressed in terms of Cartesian coordinates (x, y, and z) and angular movements (yaw, pitch, and roll). Delta robot: a tripod linkage, used to construct fast-acting manipulators with a wide range of movement. Drive Power: The energy source or sources for the robot actuators. == E == Emergent behaviour, a complicated resultant behaviour that emerges from the repeated operation of simple underlying behaviours. Envelope (Space), Maximum The volume of space encompassing the maximum designed movements of all robot parts including the end-effector, workpiece, and attachments. Explosive ordnance disposal robot A mobile robot designed to assess whether an object contains explosives; some carry detonators that can be deposited at the object and activated after the robot withdraws. == F == FIRST(For Inspiration and Recognition of Science and Technology): an organization founded by inventor Dean Kamen in 1989 in order to develop ways to inspire students in engineering and technology fields. Forward chaining: a process in which events or received data are considered by an entity to intelligently adapt its behavior. == G == Gynoid: A humanoid robot designed to look like a human female. == H == Haptic: tactile feedback technology using the operator's sense of touch. Also sometimes applied to robot manipulators with their own touch sensitivity. Hexapod (platform): A movable platform using six linear actuators. Often used in flight simulators and fairground rides, they also have applications as a robotic manipulator. Hexapod (walker): A six-legged walking robot, using a simple insect-like locomotion. Human–computer interaction. Humanoid: A robotic entity designed to resemble a human being in form, function, or both. Hydraulics: the control of mechanical force and movement, generated by the application of liquid under pressure. cf. pneumatics. == I == Industrial robot: A reprogrammable, multifunctional manipulator designed to move material, parts, tools, or specialized devices through variable programmed motions for the performance of a variety of tasks. Insect robot: A small robot designed to imitate insect behaviors rather than complex human behaviors. == K == Kalman filter: a mathematical technique to estimate the value of a sensor measurement, from a series of intermittent and noisy values. Kinematics: the study of motion, as applied to robots. This includes both the design of linkages to perform motion, their power, control and stability; also their planning, such as choosing a sequence of movements to achieve a broader task. Inverse Kinematics: the process of determining joint angles required for a robot's end-effector to reach a desired position and orientation in space. Used in motion planning to calculate motor commands from target positions. == L == Linear actuator A form of motor that generates a linear movement directly. == M == Manipulator or gripper: A robotic 'hand'. Mobile robot: A self-propelled and self-contained robot that is capable of moving over a mechanically unconstrained course. Muting: The deactivation of a presence-sensing safeguarding device during a portion of the robot cycle. Mecanum wheel: A wheel fitted with angled rollers that enables a robot vehicle to move in multiple directions, including sideways. == O == Ornithopter – An aerial robot or drone that achieves flight through a flapping-wing mechanism rather than rotating blades or fixed wings, often utilized for highly maneuverable flight. == P == Parallel manipulator: an articulated robot or manipulator based on a number of kinematic chains, actuators and joints, in parallel. cf. serial manipulator. Pendant: Any portable control device that permits an operator to control the robot from within the restricted envelope (space) of the robot. Pneumatics: the control of mechanical force and movement, generated by the application of compressed gas. cf. hydraulics. Powered exoskeleton: is a wearable mobile machine that allow for limb movement with increased strength and endurance. Prosthetic robots: programmable manipulators or devices for missing human limbs. == R == Remote manipulator: A manipulator under direct human control, often used for work with hazardous materials. Robonaut: a development project conducted by NASA to create humanoid robots capable of using space tools and working in similar environments to suited astronauts. == S == Sensor fusion:The process of combining data from multiple sensors, such as LiDAR, cameras, global positioning systems (GPS), and inertial measurement units (IMUs), to produce a more accurate and reliable understanding of an environment than using a single sensor alone. It is widely used in robotics and autonomous systems to improve perception, localization, and decision-making. Serial manipulator: an articulated robot or manipulator with a single series kinematic chain of actuators. cf. parallel manipulator. Service robots are machines that extend human capabilities. Servo, a motor that moves to and maintains a set position under command, rather than continuously moving. Servomechanism An automatic device that uses error-sensing negative feedback to correct the performance of a mechanism. Single Point of Control The ability to operate the robot such that initiation or robot motion from one source of control is possible only from that source and cannot be overridden from another source. Slow Speed Control A mode of robot motion control where the velocity of the robot is limited to allow persons sufficient time either to withdraw the hazardous motion or stop the robot. Snake robot A robot component resembling a tentacle or elephant's trunk, where many small actuators are used to allow continuous curved motion of a robot component, with many degrees of freedom. This is usually applied to snake-arm robots, which use this as a flexible manipulator. A rarer application is the snakebot, where the entire robot is mobile and snake-like, so as to gain access through narrow spaces. Stepper motor Stewart platform A movable platform using six linear actuators, hence also known as a Hexapod. Subsumption architecture A robot architecture that uses a modular, bottom-up design beginning with the least complex behavioral tasks. Surgical robot, a remote manipulator used for keyhole surgery Swarm robotics involve large numbers of mostly simple physical robots. Their actions may seek to incorporate emergent behavior observed in social insects (swarm intelligence). Synchro == T == Teach Mode: The control state that al

  Read more →
• 

  Transfer function matrix

  In control system theory, and various branches of engineering, a transfer function matrix, or just transfer matrix is a generalisation of the transfer functions of single-input single-output (SISO) systems to multiple-input and multiple-output (MIMO) systems. The matrix relates the outputs of the system to its inputs. It is a particularly useful construction for linear time-invariant (LTI) systems because it can be expressed in terms of the s-plane. In some systems, especially ones consisting entirely of passive components, it can be ambiguous which variables are inputs and which are outputs. In electrical engineering, a common scheme is to gather all the voltage variables on one side and all the current variables on the other regardless of which are inputs or outputs. This results in all the elements of the transfer matrix being in units of impedance. The concept of impedance (and hence impedance matrices) has been borrowed into other energy domains by analogy, especially mechanics and acoustics. Many control systems span several different energy domains. This requires transfer matrices with elements in mixed units. This is needed both to describe transducers that make connections between domains and to describe the system as a whole. If the matrix is to properly model energy flows in the system, compatible variables must be chosen to allow this. == General == A MIMO system with m outputs and n inputs is represented by a m × n matrix. Each entry in the matrix is in the form of a transfer function relating an output to an input. For example, for a three-input, two-output system, one might write, [ y 1 y 2 ] = [ g 11 g 12 g 13 g 21 g 22 g 23 ] [ u 1 u 2 u 3 ] {\displaystyle {\begin{bmatrix}y_{1}\\y_{2}\end{bmatrix}}={\begin{bmatrix}g_{11}&g_{12}&g_{13}\\g_{21}&g_{22}&g_{23}\end{bmatrix}}{\begin{bmatrix}u_{1}\\u_{2}\\u_{3}\end{bmatrix}}} where the un are the inputs, the ym are the outputs, and the gmn are the transfer functions. This may be written more succinctly in matrix operator notation as, Y = G U {\displaystyle \mathbf {Y} =\mathbf {G} \mathbf {U} } where Y is a column vector of the outputs, G is a matrix of the transfer functions, and U is a column vector of the inputs. In many cases, the system under consideration is a linear time-invariant (LTI) system. In such cases, it is convenient to express the transfer matrix in terms of the Laplace transform (in the case of continuous time variables) or the z-transform (in the case of discrete time variables) of the variables. This may be indicated by writing, for instance, Y ( s ) = G ( s ) U ( s ) {\displaystyle \mathbf {Y} (s)=\mathbf {G} (s)\mathbf {U} (s)} which indicates that the variables and matrix are in terms of s, the complex frequency variable of the s-plane arising from Laplace transforms, rather than time. The examples in this article are all assumed to be in this form, although that is not explicitly indicated for brevity. For discrete time systems s is replaced by z from the z-transform, but this makes no difference to subsequent analysis. The matrix is particularly useful when it is a proper rational matrix, that is, all its elements are proper rational functions. In this case, the state-space representation can be applied. In systems engineering, the overall system transfer matrix G (s) is decomposed into two parts: H (s) representing the system being controlled, and C(s) representing the control system. C (s) takes as its inputs the inputs of G (s) and the outputs of H (s). The outputs of C (s) form the inputs for H (s). == Electrical systems == In electrical systems, it is often the case that the distinction between input and output variables is ambiguous. They can be either, depending on circumstance and point of view. In such cases, the concept of port (a place where energy is transferred from one system to another) can be more useful than input and output. It is customary to define two variables for each port (p): the voltage across it (Vp) and the current entering it (Ip). For instance, the transfer matrix of a two-port network can be defined as follows, [ V 1 V 2 ] = [ z 11 z 12 z 21 z 22 ] [ I 1 I 2 ] {\displaystyle {\begin{bmatrix}V_{1}\\V_{2}\end{bmatrix}}={\begin{bmatrix}z_{11}&z_{12}\\z_{21}&z_{22}\\\end{bmatrix}}{\begin{bmatrix}I_{1}\\I_{2}\end{bmatrix}}} where the zmn are called the impedance parameters, or z-parameters. They are so-called because they are in units of impedance and relate port currents to a port voltage. The z-parameters are not the only way that transfer matrices are defined for two-port networks. Six basic matrices relate voltages and currents, each with advantages for particular system network topologies. However, only two of these can be extended beyond two ports to an arbitrary number of ports. These two are the z-parameters and their inverse, the admittance parameters or y-parameters. To understand the relationship between port voltages and currents and inputs and outputs, consider the simple voltage divider circuit. If we only wish to consider the output voltage (V2) resulting from applying the input voltage (V1) then the transfer function can be expressed as, [ V 2 ] = [ R 2 R 1 + R 2 ] [ V 1 ] {\displaystyle {\begin{bmatrix}V_{2}\end{bmatrix}}={\begin{bmatrix}{\dfrac {R_{2}}{R_{1}+R_{2}}}\end{bmatrix}}{\begin{bmatrix}V_{1}\end{bmatrix}}} which can be considered the trivial case of a 1×1 transfer matrix. The expression correctly predicts the output voltage if there is no current leaving port 2, but is increasingly inaccurate as the load increases. If, however, we attempt to use the circuit in reverse, driving it with a voltage at port 2 and calculate the resulting voltage at port 1 the expression gives completely the wrong result even with no load on port 1. It predicts a greater voltage at port 1 than was applied at port 2, an impossibility with a purely resistive circuit like this one. To correctly predict the behaviour of the circuit, the currents entering or leaving the ports must also be taken into account, which is what the transfer matrix does. The impedance matrix for the voltage divider circuit is, [ V 1 V 2 ] = [ R 1 + R 2 R 2 R 2 R 2 ] [ I 1 I 2 ] {\displaystyle {\begin{bmatrix}V_{1}\\V_{2}\end{bmatrix}}={\begin{bmatrix}R_{1}+R_{2}&R_{2}\\R_{2}&R_{2}\end{bmatrix}}{\begin{bmatrix}I_{1}\\I_{2}\end{bmatrix}}} which fully describes its behaviour under all input and output conditions. At microwave frequencies, none of the transfer matrices based on port voltages and currents are convenient to use in practice. Voltage is difficult to measure directly, current next to impossible, and the open circuits and short circuits required by the measurement technique cannot be achieved with any accuracy. For waveguide implementations, circuit voltage and current are entirely meaningless. Transfer matrices using different sorts of variables are used instead. These are the powers transmitted into, and reflected from a port, which are readily measured in the transmission line technology used in distributed-element circuits in the microwave band. The most well-known and widely used of these sorts of parameters is the scattering parameters, or s-parameters. == Mechanical and other systems == The concept of impedance can be extended into the mechanical and other domains through a mechanical-electrical analogy, hence the impedance parameters and other forms of 2-port network parameters can also be extended to the mechanical domain. To do this, an effort variable and a flow variable are made analogues of voltage and current, respectively. For mechanical systems under translation these variables are force and velocity respectively. Expressing the behaviour of a mechanical component as a two-port or multi-port with a transfer matrix is a useful thing to do because, like electrical circuits, the component can often be operated in reverse and its behaviour is dependent on the loads at the inputs and outputs. For instance, a gear train is often characterised simply by its gear ratio, a SISO transfer function. However, the gearbox output shaft can be driven around to turn the input shaft, requiring a MIMO analysis. In this example, the effort and flow variables are torque T and angular velocity ω, respectively. The transfer matrix in terms of z-parameters will look like, [ T 1 T 2 ] = [ z 11 z 12 z 21 z 22 ] [ ω 1 ω 2 ] {\displaystyle {\begin{bmatrix}T_{1}\\T_{2}\end{bmatrix}}={\begin{bmatrix}z_{11}&z_{12}\\z_{21}&z_{22}\end{bmatrix}}{\begin{bmatrix}\omega _{1}\\\omega _{2}\end{bmatrix}}} However, the z-parameters are not necessarily the most convenient for characterising gear trains. A gear train is the analogue of an electrical transformer and the h-parameters (hybrid parameters) better describe transformers because they directly include the turns ratios (the analogue of gear ratios). The gearbox transfer matrix in h-parameter format is, [ T 1 ω 2 ] = [ h 11 h 12 h 21 h 22 ] [ ω 1 T 2 ] {\displaystyle {\begin{bmatrix}T_{1}\\\omega _{2}\end{bm

  Read more →
• 

  Automated penetration testing

  Automated penetration testing (also known as autonomous penetration testing or automated offensive security) is the application of software-driven workflows and orchestration to simulate cyberattack techniques. These methods are used to identify, validate, and exploit security vulnerabilities in IT assets such as networks, applications, and cloud infrastructure. Automated penetration testing is the use of software to simulate cyberattacks in order to rapidly identify exploitable vulnerabilities across systems without relying solely on human testers. In technical literature, the term describes a spectrum of activities ranging from scripted exploit orchestration to experimental systems designed for fully autonomous attack planning. Automated Penetration Testing falls short of testing using manual experts in terms of discovery of deep complex vulnerabilities and contextual business logic vulnerabilities. == Terminology and scope == The label “automated penetration testing” appears frequently in vendor and practitioner writing but lacks a single, neutral, standards-based definition. In the literature the term’s scope varies: some authors use it to mean automation of specific penetration-testing tasks (scanning, exploitation attempts, evidence collection), others to describe integrated, repeatable assessment pipelines, and a smaller body of work investigates autonomous decision-making agents that select attack steps algorithmically. To avoid implying consensus, this article describes common techniques and architectures reported in the literature and industry, and it notes where claims are primarily found in practitioner publications or early-stage research. Its important to note the differences between automated penetration testing and traditional penetration testing using human skill. The most important difference is scope and speed. Automated penetration testing generally fails at discovering exposures and weakness associated with business logic due to a lack of contextual understanding. The benefit of Automated Penetration testing is speed at which it can be conducted. Traditional penetration testing also is expected to be accurate and contain no false positives. This is due to the human validation aspect of the test. Automated approaches are expected to contain mistakes and false positives which need to be validated upon completion of the test. == History == Automated offensive techniques build on decades of tools and scripting that aided vulnerability discovery and exploitation. Early vulnerability scanners and community scripting in the 1990s and 2000s created the first layers of automation. Later, modular exploitation frameworks (notably Metasploit) integrated scanning and exploitation modules and made automated proof-of-concept attacks more accessible. Over the 2010s–2020s, as cloud platforms, APIs and continuous delivery practices increased the need for frequent validation, academic and industry interest in formalizing automated approaches also grew. == Methodologies and architectures == Descriptions in the literature and technical reports cluster automated capabilities into several overlapping models: Scripted/engineered playbooks (task automation): Predefined workflows or playbooks encode common attack paths (for example, web application exploit sequences or lateral-movement chains). These playbooks are designed to reproduce known techniques in a controlled way to validate exploitability and reduce manual repetition. Exploit-oriented orchestration: Automation orchestrates exploitation modules from established frameworks to perform controlled proof-of-concept attacks that confirm exploitability rather than simply flagging potential weaknesses. This approach can reduce false positives versus passive scanning when tests are run in an appropriately controlled environment. Orchestrated multi-tool pipelines: A coordinated toolchain integrates reconnaissance, vulnerability scanning, credential testing, exploitation modules and reporting. Data and state persist across stages so that multi-step workflows (e.g., discover → escalate → pivot) can be executed repeatably, approximating manual penetration-test methodologies at larger scale. Continuous / CI-integrated testing: Automation embedded in build or deployment pipelines (CI/CD) triggers assessments automatically on new builds, configuration changes, or on a schedule, supporting frequent, repeatable validation aligned with DevOps practices. Academic theses and experimental work describe CI/CD-integrated proof-of-concept systems for web applications and internal networks. Research on autonomous planning and learning: Recent academic work explores machine learning and reinforcement-learning approaches to select or prioritise attack steps, generate attack sequences, or optimize the testing path; these approaches are largely experimental and raise distinct validation and safety questions. == Tools and vendors == Automated penetration testing is provided by a mix of open-source projects, commercial platforms, and professional services. These often follow the penetration testing as a service (PTaaS) model, which integrates automated scanning with manual validation by security analysts. Examples of widely known tools and vendors in the space include exploitation frameworks such as Metasploit, commercial automated platforms and PTaaS providers, and specialist vendors that offer breach-and-attack simulation (BAS) or continuous testing capabilities. == Applications and deployment models == In industry practice, some organizations deploy automated techniques through dedicated security validation platforms rather than bespoke toolchains. These platforms are typically used for continuous or scheduled validation in pre-production or controlled environments and are often positioned alongside, rather than in place of, human-led penetration testing. Examples discussed in secondary literature include platforms such as Pentera, which are commonly classified under breach-and-attack simulation or automated security validation rather than as standalone penetration-testing methodologies.

  Read more →
• 

  Video browsing

  Video browsing, also known as exploratory video search, is the interactive process of skimming through video content in order to satisfy some information need or to interactively check if the video content is relevant. While originally proposed to help users inspecting a single video through visual thumbnails, modern video browsing tools enable users to quickly find desired information in a video archive by iterative human–computer interaction through an exploratory search approach. Many of these tools presume a smart user that wants features to interactively inspect video content, as well as automatic content filtering features. For that purpose, several video interaction features are usually provided, such as sophisticated navigation in video or search by a content-based query. Video browsing tools often build on lower-level video content analysis, such as shot transition detection, keyframe extraction, semantic concept detection, and create a structured content overview of the video file or video archive. Furthermore, they usually provide sophisticated navigation features, such as advanced timelines, visual seeker bars or a list of selected thumbnails, as well as means for content querying. Examples of content queries are shot filtering through visual concepts (e.g., only shots showing cars), through some specific characteristics (e.g., color or motion filtering), through user-provided sketches (e.g., a visually drawn sketch), or through content-based similarity search. == History == Video browsing was originally proposed by Iranian engineer Farshid Arman, Taiwanese computer scientist Arding Hsu, and computer scientist Ming-Yee Chiu, while working at Siemens, and it was presented at the ACM International Conference in August 1993. They described a shot detection algorithm for compressed video that was originally encoded with discrete cosine transform (DCT) video coding standards such as JPEG, MPEG and H.26x. The basic idea was that, since the DCT coefficients are mathematically related to the spatial domain and represent the content of each frame, they can be used to detect the differences between video frames. In the algorithm, a subset of blocks in a frame and a subset of DCT coefficients for each block are used as motion vector representation for the frame. By operating on compressed DCT representations, the algorithm significantly reduces the computational requirements for decompression and enables effective video browsing. The algorithm represents separate shots of a video sequence by an r-frame, a thumbnail of the shot framed by a motion tracking region. A variation of this concept was later adopted for QBIC video content mosaics, where each r-frame is a salient still from the shot it represents. === Video Notebook === Modern video browsing solutions include Video Notebook, a Menlo Park startup founded in 2021 by Mike Lanza, which uses computer vision to extract slides and optical character recognition and speech recognition to facilitate video search. The software can be either used on the client side (using a browser extension), where the slides and text are extracted while the video is watched (e.g. on a video platform like YouTube or Udemy), or on the server side. Processed videos, which can be viewed in the Video Notebook web app, feature a video browsing user interface with extracted timestamped slides, a search bar for querying the video (or a collection of videos), and text chapters. Video Notebook customers include organisations like Ernst & Young. === Video Browser Showdown === The Video Browser Showdown (VBS) is an annual live evaluation competition for exploratory video search tools, where international researchers use video browsing tools to solve ad-hoc video search tasks on a moderately large data set as fast as possible. The main goal of the VBS, which started in 2012 at the International Conference on MultiMedia Modeling (MMM), is to advance the performance of video browsing tools. Since 2016, the VBS also collaborates with TRECVID. The aim of the VBS is to evaluate video browsing tools for efficiency at known-item search (KIS) tasks with a well-defined data set in direct comparison to other tools.

  Read more →
• 

  ImageMixer

  ImageMixer is a brand name of video editing software that edits digital video and still image in camcorders and authors to VCD and DVD. It is a second-party Japanese product, distributed by Pixela Corporation, a Japanese manufacturer of PC peripheral hardware and multimedia software. == Bundling == ImageMixer is widely used for several camcorder brands, such as JVC, Hitachi and Canon. Also, Sony has chosen to package ImageMixer with its DVD and HDD Handycam. == ImageMixer series == ImageMixer has other series of software for digital camera, such as ImageMixer Label Maker and ImageMixer DVD dubbing. ImageMixer also has movie editing solution for Macintosh. == Windows Vista version of ImageMixer == A Windows Vista version of ImageMixer has been developed (ImageMixer3).

  Read more →
• 

  Desktop Window Manager

  Desktop Window Manager (DWM, previously Desktop Compositing Engine or DCE in builds of pre-reset Windows Longhorn) is the compositing window manager in Microsoft Windows since Windows Vista that enables the use of hardware acceleration to render the graphical user interface of Windows. It was originally created to enable portions of the new "Windows Aero" user experience, which allowed for effects such as transparency, 3D window switching and more. It is also included with Windows Server 2008, but requires the "Desktop Experience" feature and compatible graphics drivers to be installed. == Architecture == The Desktop Window Manager is a compositing window manager, meaning that each program has a buffer that it writes data to; DWM then composites each program's buffer into a final image. By comparison, the stacking window manager in Windows XP and earlier (and also Windows Vista and Windows 7 with Windows Aero disabled) comprises a single display buffer to which all programs write. DWM works in different ways depending on the operating system (Windows 7 or Windows Vista) and on the version of the graphics drivers it uses (WDDM 1.0 or 1.1). Under Windows 7 and with WDDM 1.1 drivers, DWM only writes the program's buffer to the video RAM, even if it is a graphics device interface (GDI) program. This is because Windows 7 supports (limited) hardware acceleration for GDI and in doing so does not need to keep a copy of the buffer in system RAM so that the CPU can write to it. Because the compositor has access to the graphics of all applications, it easily allows visual effects that string together visuals from multiple applications, such as transparency. DWM uses DirectX to perform the function of compositing and rendering in the GPU, freeing the CPU of the task of managing the rendering from the off-screen buffers to the display. However, it does not affect applications painting to the off-screen buffers – depending on the technologies used for that, this might still be CPU-bound. DWM-agnostic rendering techniques like GDI are redirected to the buffers by rendering the user interface (UI) as bitmaps. DWM-aware rendering technologies like WPF directly make the internal data structures available in a DWM-compatible format. The window contents in the buffers are then converted to DirectX textures. The desktop itself is a full-screen Direct3D surface, with windows being represented as a mesh consisting of two adjacent (and mutually inverted) triangles, which are transformed to represent a 2D rectangle. The texture, representing the UI chrome, is then mapped onto these rectangles. Window transitions are implemented as transformations of the meshes, using shader programs. With Windows Vista, the transitions are limited to the set of built-in shaders that implement the transformations. Greg Schechter, a developer at Microsoft has suggested that this might be opened up for developers and users to plug in their own effects in a future release. DWM only maps the primary desktop object as a 3D surface; other desktop objects, including virtual desktops as well as the secure desktop used by User Account Control are not. Because all applications render to an off-screen buffer, they can be read off the buffer embedded in other applications as well. Since the off-screen buffer is constantly updated by the application, the embedded rendering will be a dynamic representation of the application window and not a static rendering. This is how the live thumbnail previews and Windows Flip work in Windows Vista and Windows 7. DWM exposes a public API that allows applications to access these thumbnail representations. The size of the thumbnail is not fixed; applications can request the thumbnails at any size - smaller than the original window, at the same size or even larger - and DWM will scale them properly before returning. Aero Flip does not use the public thumbnail APIs as they do not allow for directly accessing the Direct3D textures. Instead, Aero Flip is implemented directly in the DWM engine. The Desktop Window Manager uses Media Integration Layer (MIL), the unmanaged compositor which it shares with Windows Presentation Foundation, to represent the windows as composition nodes in a composition tree. The composition tree represents the desktop and all the windows hosted in it, which are then rendered by MIL from the back of the scene to the front. Since all the windows contribute to the final image, the color of a resultant pixel can be decided by more than one window. This is used to implement effects such as per-pixel transparency. DWM allows custom shaders to be invoked to control how pixels from multiple applications are used to create the displayed pixel. The DWM includes built-in Pixel Shader 2.0 programs which compute the color of a pixel in a window by averaging the color of the pixel as determined by the window behind it and its neighboring pixels. These shaders are used by DWM to achieve the blur effect in the window borders of windows managed by DWM, and optionally for the areas where it is requested by the application. Since MIL provides a retained mode graphics system by caching the composition trees, the job of repainting and refreshing the screen when windows are moved is handled by DWM and MIL, freeing the application of the responsibility. The background data is already in the composition tree and the off-screen buffers and is directly used to render the background. In pre-Vista Windows OSs, background applications had to be requested to re-render themselves by sending them the WM_PAINT message. DWM uses double-buffered graphics to prevent flickering and tearing when moving windows. The compositing engine uses optimizations such as culling to improve performance, as well as not redrawing areas that have not changed. Because the compositor is multi-monitor aware, DWM natively supports this too. During full-screen applications, such as games, DWM does not perform window compositing and therefore performance will not appreciably decrease. On Windows 8 and Windows Server 2012, DWM is used at all times and cannot be disabled, due to the new "start screen experience" implemented. Since the DWM process is usually required to run at all times on Windows 8, users experiencing an issue with the process are seeing memory usage decrease after a system reboot. This is often the first step in a long list of troubleshooting tasks that can help. It is possible to prevent DWM from restarting temporarily in Windows 8, which causes the desktop to turn black, the taskbar grey, and break the start screen/modern apps, but desktop apps will continue to function and appear just like Windows 7 and Vista's Basic theme, based on the single-buffer renderer used by XP. They also use Windows 8's centered title bar, visible within Windows PreInstallation Environment. Starting up Windows without DWM will not work because the default lock screen requires DWM unlike the fallback lockscreen that appears as a command line interface program when Windows.UI.Logon.dll isn't present on Windows versions such as 1507 and later, so it can only be done on the fly, and does not have any practical purposes. Starting with Windows 10, disabling DWM in such a way will cause the entire compositing engine to break, even traditional desktop apps, due to Universal App implementations in the taskbar and new start menu. Windows can still be partially usable without the presence of DWM but requires Sihost.exe to not be present due to it relying on DWM. Most of the applications in Windows 11 require DWM to render UI elements and transparency, Windows 11's new task manager requires dwm to render menus unlike the fallback -d version. Unlike its predecessors, Windows 8 supports basic display adapters through Windows Advanced Rasterization Platform (WARP), which uses software rendering and the CPU to render the interface rather than the graphics card. This allows DWM to function without compatible drivers, but not at the same level of performance as with a normal graphics card. DWM on Windows 8 also adds support for stereoscopic 3D. == Redirection == For rendering techniques that are not DWM-aware, output must be redirected to the DWM buffers. With Windows, either GDI or DirectX can be used for rendering. To make these two work with DWM, redirection techniques for both are provided. With GDI, which is the most used UI rendering technique in Microsoft Windows, each application window is notified when it or a part of it comes in view and it is the job of the application to render itself. Without DWM, the rendering rasterizes the UI in a buffer in video memory, from where it is rendered to the screen. Under DWM, GDI calls are redirected to use the Canonical Display Driver (cdd.dll), a software renderer. A buffer equal to the size of the window is allocated in system memory and CDD.DLL outputs to this buffer rather than the video memory. Another buffer is allocated in the video memory to represent t

  Read more →
• 

  Statistical shape analysis

  Statistical shape analysis is an analysis of the geometrical properties of some given set of shapes by statistical methods. For instance, it could be used to quantify differences between male and female gorilla skull shapes, normal and pathological bone shapes, leaf outlines with and without herbivory by insects, etc. Important aspects of shape analysis are to obtain a measure of distance between shapes, to estimate mean shapes from (possibly random) samples, to estimate shape variability within samples, to perform clustering and to test for differences between shapes. One of the main methods used is principal component analysis (PCA). Statistical shape analysis has applications in various fields, including medical imaging, computer vision, computational anatomy, sensor measurement, and geographical profiling. == Landmark-based techniques == In the point distribution model, a shape is determined by a finite set of coordinate points, known as landmark points. These landmark points often correspond to important identifiable features such as the corners of the eyes. Once the points are collected some form of registration is undertaken. This can be a baseline methods used by Fred Bookstein for geometric morphometrics in anthropology. Or an approach like Procrustes analysis which finds an average shape. David George Kendall investigated the statistical distribution of the shape of triangles, and represented each triangle by a point on a sphere. He used this distribution on the sphere to investigate ley lines and whether three stones were more likely to be co-linear than might be expected. Statistical distribution like the Kent distribution can be used to analyse the distribution of such spaces. Alternatively, shapes can be represented by curves or surfaces representing their contours, by the spatial region they occupy. == Shape deformations == Differences between shapes can be quantified by investigating deformations transforming one shape into another. In particular a diffeomorphism preserves smoothness in the deformation. This was pioneered in D'Arcy Thompson's On Growth and Form before the advent of computers. Deformations can be interpreted as resulting from a force applied to the shape. Mathematically, a deformation is defined as a mapping from a shape x to a shape y by a transformation function Φ {\displaystyle \Phi } , i.e., y = Φ ( x ) {\displaystyle y=\Phi (x)} . Given a notion of size of deformations, the distance between two shapes can be defined as the size of the smallest deformation between these shapes. Diffeomorphometry is the focus on comparison of shapes and forms with a metric structure based on diffeomorphisms, and is central to the field of Computational anatomy. Diffeomorphic registration, introduced in the 90's, is now an important player with existing codes bases organized around ANTS, DARTEL, DEMONS, LDDMM, StationaryLDDMM, and FastLDDMM are examples of actively used computational codes for constructing correspondences between coordinate systems based on sparse features and dense images. Voxel-based morphometry (VBM) is an important technology built on many of these principles. Methods based on diffeomorphic flows are also used. For example, deformations could be diffeomorphisms of the ambient space, resulting in the LDDMM (Large Deformation Diffeomorphic Metric Mapping) framework for shape comparison.

  Read more →
• 

  Desktop video

  Desktop video refers to a phenomenon lasting from the mid-1980s to the early 1990s when the graphics capabilities of personal computers such as the Amiga, Macintosh II, and specially-upgraded IBM PC compatibles had advanced to the point where individuals and local broadcasters could use them for analog non-linear editing and vision mixing in video production. Despite the use of computers, desktop video should not be confused with digital video since the video data remained analog, and it uses items like a VCR and a camcorder to record the video. Full-screen, full-motion video's vast storage requirements meant that the promise of digital encoding would not be realized on desktop computers for at least another decade. == Description == There were multiple models of genlock cards available to synchronize the content; the Newtek Video Toaster was commonly used in Amiga in countries that used NTSC (PAL-M in Brazil), while PCs had Truevision and Matrox Illuminator cards and Mac systems had the SuperMac Video Spigot and Radius VideoVision cards. Apple later introduced the Macintosh Quadra 840AV and Centris 660AV systems to specifically address this market. Desktop video was a parallel development to desktop publishing and enabled many small production houses and local TV stations to produce their own original content for the first time. Along with the advent of public-access cable channels, desktop video meant that television advertising became affordable for local businesses such as retailers, restaurants, real estate agents, contractors and auto dealers. As with the phrase desktop publishing, use of the term died out as the technologies to which it referred become the norm for any kind of video production.

  Read more →
• 

  Afghan Girls Robotics Team

  The Afghan Girls Robotics Team, also known as the Afghan Dreamers, is an all-girl robotics team from Herat, Afghanistan, founded through the Digital Citizen Fund (DCF) in 2017 by Roya Mahboob and Alireza Mehraban. It is made up of girls between ages 12 and 18 and their mentors. Several members of the team were relocated to Qatar and Mexico by humanitarian and tech entrepreneur Sarah Porter following the fall of Kabul in August 2021. A documentary film featuring members of the team, titled Afghan Dreamers, was released by MTV Documentary Films in 2023. == Origins == The Afghan Girls Robotics Team was co-founded in 2017 by Roya Mahboob, who is their coach, mentor and sponsor, and founder of the Digital Citizen Fund (DCF), which is the parent organization for the team. Dean Kamen was planning a 2017 competition in the United States and had recruited Mahboob to form a team from Afghanistan. Out of 150 girls, 12 were selected for the first team. Before parts were sent by Kamen, they trained in the basement of the home of Mahboob's parents, with scrap metal and without safety equipment under the guidance of their coach, Mahboob's brother Alireza Mehraban, who is also a co-founder of the team. == 2017 and 2018 == In 2017, six members of the Afghan Girls Robotics Team traveled to the United States to participate in the international FIRST Global Challenge robotics competition. Their visas were rejected twice after they made two journeys from Herat to Kabul through Taliban-controlled areas, before officials in the United States government intervened to allow them to enter the United States. Customs officials also detained their robotics kits, which left them two weeks to construct their robot, unlike some teams that had more time. They were awarded a Silver medal for Courageous Achievement. One week after they returned home from the competition, the father of team captain Fatemah Qaderyan, Mohammad Asif Qaderyan, was killed in a suicide bombing. After their United States visas expired, the team participated in competitions in Estonia and Istanbul. Three of the 12 members participated in the 2017 Entrepreneurial Challenge at the Robotex festival in Estonia, and won the competition for their solar-powered robot designed to assist farmers. In 2018, the team trained in Canada, continued to travel in the United States for months and participate in competitions. == 2019 == The Afghan Girls Robotics team had aspirations to develop a science and technology school for girls in Afghanistan. Roya Mahboob interfaced with the School of Engineering and Applied Sciences (SEAS), the School of Architecture, and the Whitney and Betty MacMillan Center for International and Area Studies Yale University to design the infrastructure for what they named The Dreamer Institute. == 2020 == In March 2020, the governor of Herat at the time, in response to the COVID-19 pandemic in Afghanistan and a scarcity of ventilators, sought help with the design of low-cost ventilators, and the Afghan Girls Robotics Team was one of six teams contacted by the government. Using a design from Massachusetts Institute of Technology and with guidance from MIT engineers and Douglas Chin, a surgeon in California, the team developed a prototype with Toyota Corolla parts and a chain drive from a Honda motorcycle. UNICEF also supported the team with the acquisition of necessary parts during the three months they spent building the prototype that was completed in July 2020. Their design costs around $500 compared to $50,000 for a ventilator. In December 2020, Minister of Industry and Commerce Nizar Ahmad Ghoryani donated funding and obtained land for a factory to produce the ventilators. Under the direction of their mentor Roya Mahboob, the Afghan Dreamers also designed a UVC Robot for sanitization, and a Spray Robot for disinfection, both of which were approved by the Ministry of Health for production. == 2021 == In early August 2021, Somaya Faruqi, former captain of the team, was quoted by Public Radio International about the future of Afghanistan, stating, "We don’t support any group over another but for us what’s important is that we be able to continue our work. Women in Afghanistan have made a lot of progress over the past two decades and this progress must be respected." On August 17, 2021, the Afghan Girls Robotics Team and their coaches were reported to be attempting to evacuate, but unable to obtain a flight out of Afghanistan, and a lawyer appealed to Canada for assistance regarding the evacuation of the team members. As of August 19, 2021, nine members of the team and their coaches had evacuated to Qatar. The founder of the team, Roya Mahboob, and DCF board member, Elizabeth Schaeffer Brown, were previously in contact with the Qatari government to assist the team members in their evacuation from Afghanistan. By August 25, 2021, some members arrived in Mexico. Saghar, a team member who evacuated to Mexico, said, "We wanted to continue the path that we started to continue to go for our achievements and to go for having our dreams through reality. So that's why we decided to leave Afghanistan and go for somewhere safe" in an interview with The Associated Press. The members who have left Afghanistan participated in an online robotics competition in September and plan to continue their education. A documentary film titled Afghan Dreamers, produced by Beth Murphy and directed by David Greenwald, was in post-production when the team began to evacuate. == 2022 == The Afghan Dreamers were involved in a training program at the Texas A&M University at Qatar’s STEM Hub. == 2023 == The Afghan Girls Robotics Team had a booth at the 5th UN Conference on the Least Developed Countries, where they displayed some of the robots the team had constructed. == Afghan Dreamers documentary == The Afghan Dreamers documentary from MTV Documentary Films premiered in May 2023 on Paramount+. The film was directed by David Greenwald and produced by David Cowan and Beth Murphy. In a review for Screen Daily, Wendy Ide wrote, "This film, with its likeable cast of girl nerds and positive message, should enjoy a warm reception on the festival circuit, and will be of particular interest to events seeking to showcase women's stories from around the world. It also serves as a timely cautionary tale – a case study on just how quickly the rights and the opportunities of women can be curtailed, at the behest of the men in power." == Honors and awards == 2017 Silver medal for Courageous Achievement at the FIRST Global Challenge, science and technology 2017 Benefiting Humanity in AI Award at World Summit AI 2017 Winner, Entrepreneurship Challenge at Robotex in Estonia 2018 Permission to Dream Award, Raw Film Festival 2018 Conrad Innovation Challenge, Raw Film Festival 2018 Rookie All Star – District Championship, Canada 2018 Asia Game Changer Award Honoree 2019 Inspiring in Engineering Award – FIRST Detroit World Championship 2019 Asia Game Changer Award of California 2019 Safety Award – FIRST Global, Dubai 2021 Forbes 30 Under 30 Asia 2022 World Championships, Genoa, Switzerland

  Read more →