AI For Business Strategy Mit

AI For Business Strategy Mit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Image subtraction

Image subtraction or pixel subtraction or difference imaging is an image processing technique whereby the digital numeric value of one pixel or whole image is subtracted from another image, and a new image generated from the result. This is primarily done for one of two reasons – levelling uneven sections of an image such as half an image having a shadow on it, or detecting changes between two images. This method can show things in the image that have changed position, brightness, color, or shape. For this technique to work, the two images must first be spatially aligned to match features between them, and their photometric values and point spread functions must be made compatible, either by careful calibration, or by post-processing (using color mapping). The complexity of the pre-processing needed before differencing varies with the type of image, but is essential to ensure good subtraction of static features. This is commonly used in fields such as time-domain astronomy (known primarily as difference imaging) to find objects that fluctuate in brightness or move. In automated searches for asteroids or Kuiper belt objects, the target moves and will be in one place in one image, and in another place in a reference image made an hour or day later. Thus, image processing algorithms can make the fixed stars in the background disappear, leaving only the target. Distinct families of astronomical image subtraction techniques have emerged, operating in both image space or frequency space, with distinct trade-offs in both quality of subtraction and computational cost. These algorithms lie at the heart of almost all modern (and upcoming) transient surveys, and can enable the detection of even faint supernovae embedded in bright galaxies. Nevertheless, in astronomical imaging, significant 'residuals' remain around bright, complex sources, necessitating further algorithmic steps to identify candidates (known as real-bogus classification) The Hutchinson metric can be used to "measure of the discrepancy between two images for use in fractal image processing".
Read more →
Geographical cluster

A geographical cluster is a localized anomaly, usually an excess of something given the distribution or variation of something else. Often it is considered as an incidence rate that is unusual in that there is more of some variable than might be expected. Examples would include: a local excess disease rate, a crime hot spot, areas of high unemployment, accident blackspots, unusually high positive residuals from a model, high concentrations of flora or fauna, physical features or events like earthquake epicenters etc... Identifying these extreme regions may be useful in that there could be implicit geographical associations with other variables that can be identified and would be of interest. Pattern detection via the identification of such geographical clusters is a very simple and generic form of geographical analysis that has many applications in many different contexts. The emphasis is on localized clustering or patterning because this may well contain the most useful information. A geographical cluster is different from a high concentration as it is generally second order, involving the factoring in of the distribution of something else. == Geographical cluster detection == Identifying geographical clusters can be an important stage in a geographical analysis. Mapping the locations of unusual concentrations may help identify causes of these. Some techniques include the Geographical Analysis Machine and Besag and Newell's cluster detection method.
Read more →
Ground truth

Ground truth is information that is known to be real or true, provided by direct observation and measurement (i.e. empirical evidence) as opposed to information provided by inference. The term ground truth appeared in remote sensing literature as early as 1972, when NASA described it as essential "data about ... materials on the earth's surface" used to calibrate measurements. It was later adopted by the statistical modeling and machine learning communities. == Etymology == The Oxford English Dictionary (s.v. ground truth) records the use of the word Groundtruth in the sense of 'fundamental truth' from Henry Ellison's poem "The Siberian Exile's Tale", published in 1833. == Usage == The term "ground truth" can be used as a noun, adjective, and verb. Noun: "ground truth" (no hyphen). Example: "The ground truth is essential for training accurate models." Adjective: "ground-truth" (hyphenated compound adjective). Example: "We need to use ground-truth data to validate the model." Verb: "to ground-truth" or "to groundtruth" (compound verb,). Example: "We need to ground-truth the results to ensure their accuracy." == Statistics and machine learning == In statistics and machine learning, ground truth is the ideal expected result, used in statistical models to prove or disprove research hypotheses. "Ground truthing" is the process of gathering the good data for this test. Ground truth is typically included in labeled data. In machine learning, "ground truth" is not necessarily objectively correct or true. For example, in training AI models or relevance rankers, it may be a set of judgments made by people or inferred from user behavior, which may depend on context. For example, in Bayesian spam filtering, a supervised learning system is typically trained by examples labeled as spam and non-spam. Although these labels may be subjective or inaccurate, they are considered ground truth. True ground truth in machine learning is objective data. For example, suppose we are testing a stereo vision system to see how well it can estimate 3D positions. A calibrated laser rangefinder may provide accurate distances as ground truth. == Remote sensing == In remote sensing, "ground truth" refers to information collected at the imaged location. Ground truth allows image data to be related to real features and materials on the ground. The collection of ground truth data enables calibration of remote-sensing data, and aids in the interpretation and analysis of what is being sensed. Examples include cartography, meteorology, analysis of aerial photographs, satellite imagery and other techniques in which data are gathered at a distance. More specifically, ground truth may refer to a process in which "pixels" on a satellite image are compared to what is imaged (at the time of capture) in order to verify the contents of the "pixels" in the image (noting that the concept of "pixel" is imaging-system-dependent). In the case of a classified image, supervised classification can help to determine the accuracy of the classification by the remote sensing system which can minimize error in the classification. Ground truth is usually done on site, correlating what is known with surface observations and measurements of various properties of the features of the ground resolution cells under study in the remotely sensed digital image. The process also involves taking geographic coordinates of the ground resolution cell with GPS technology and comparing those with the coordinates of the "pixel" being studied provided by the remote sensing software to understand and analyze the location errors and how it may affect a particular study. Ground truth is important in the initial supervised classification of an image. When the identity and location of land cover types are known through a combination of field work, maps, and personal experience these areas are known as training sites. The spectral characteristics of these areas are used to train the remote sensing software using decision rules for classifying the rest of the image. These decision rules such as Maximum Likelihood Classification, Parallelopiped Classification, and Minimum Distance Classification offer different techniques to classify an image. Additional ground truth sites allow the remote sensor to establish an error matrix that validates the accuracy of the classification method used. Different classification methods may have different percentages of error for a given classification project. It is important that the remote sensor chooses a classification method that works best with the number of classifications used while providing the least amount of error. Ground truth also helps with atmospheric correction. Since images from satellites have to pass through the atmosphere, they can get distorted because of absorption in the atmosphere. So ground truth can help fully identify objects in satellite photos. === Errors of commission === An example of an error of commission is when a pixel reports the presence of a feature (such a tree) that, in reality, is absent (no tree is actually present). Ground truthing ensures that the error matrices have a higher accuracy percentage than would be the case if no pixels were ground-truthed. This value is the complement of the user's accuracy, i.e. Commission Error = 1 - user's accuracy. === Errors of omission === An example of an error of omission is when pixels of a certain type, for example, maple trees, are not classified as maple trees. The process of ground-truthing helps to ensure that the pixel is classified correctly and the error matrices are more accurate. This value is the complement of the producer's accuracy, i.e. Omission Error = 1 - producer's accuracy == Geographical information systems == In GIS the spatial data is modeled as field (like in remote sensing raster images) or as object (like in vectorial map representation). They are modeled from the real world (also named geographical reality), typically by a cartographic process (illustrated). Geographic information systems such as GIS, GPS, and GNSS, have become so widespread that the term "ground truth" has taken on special meaning in that context. If the location coordinates returned by a location method such as GPS are an estimate of a location, then the "ground truth" is the actual location on Earth. A smart phone might return a set of estimated location coordinates such as 43.87870, −103.45901. The ground truth being estimated by those coordinates is the tip of George Washington's nose on Mount Rushmore. The accuracy of the estimate is the maximum distance between the location coordinates and the ground truth. We could say in this case that the estimate accuracy is 10 meters, meaning that the point on Earth represented by the location coordinates is thought to be within 10 meters of George's nose—the ground truth. In slang, the coordinates indicate where we think George Washington's nose is located, and the ground truth is where it really is. In practice a smart phone or hand-held GPS unit is routinely able to estimate the ground truth within 6–10 meters. Specialized instruments can reduce GPS measurement error to under a centimeter. == Military usage == US military slang uses "ground truth" to refer to the facts comprising a tactical situation—as opposed to intelligence reports, mission plans, and other descriptions reflecting the conative or policy-based projections of the industrial·military complex. The term appears in the title of the Iraq War documentary film The Ground Truth (2006), and also in military publications, for example Stars and Stripes saying: "Stripes decided to figure out what the ground truth was in Iraq."
Read more →
ID3 algorithm

In decision tree learning, ID3 (Iterative Dichotomiser 3) is a greedy algorithm invented by Ross Quinlan used to generate a decision tree from a dataset. ID3 is the precursor to the C4.5 algorithm. The 3 in the name is meant to signify that this was Quinlan's third attempt at a model based on entropy-based splitting, and the term dichotimser is a misnomer as it implies a binary split, but the ID3 algorithm can split on multi-valued attributes. == Algorithm == The ID3 algorithm begins with the original set S {\displaystyle S} as the root node. On each iteration of the algorithm, it iterates through every unused attribute of the set S {\displaystyle S} and calculates the entropy H ( S ) {\displaystyle \mathrm {H} {(S)}} or the information gain I G ( S ) {\displaystyle IG(S)} of that attribute. It then selects the attribute which has the smallest entropy (or largest information gain) value. The set S {\displaystyle S} is then split or partitioned by the selected attribute to produce subsets of the data. (For example, a node can be split into child nodes based upon the subsets of the population whose ages are less than 50, between 50 and 100, and greater than 100.) The algorithm continues to recurse on each subset, considering only attributes never selected before. Recursion on a subset may stop in one of these cases: every element in the subset belongs to the same class; in which case the node is turned into a leaf node and labelled with the class of the examples. there are no more attributes to be selected, but the examples still do not belong to the same class. In this case, the node is made a leaf node and labelled with the most common class of the examples in the subset. there are no examples in the subset, which happens when no example in the parent set was found to match a specific value of the selected attribute. An example could be the absence of a person among the population with age over 100 years. Then a leaf node is created and labelled with the most common class of the examples in the parent node's set. Throughout the algorithm, the decision tree is constructed with each non-terminal node (internal node) representing the selected attribute on which the data was split, and terminal nodes (leaf nodes) representing the class label of the final subset of this branch. === Summary === Calculate the entropy of every attribute a {\displaystyle a} of the data set S {\displaystyle S} . Partition ("split") the set S {\displaystyle S} into subsets using the attribute for which the resulting entropy after splitting is minimized; or, equivalently, information gain is maximum. Make a decision tree node containing that attribute. Recurse on subsets using the remaining attributes. === Properties === ID3 does not guarantee an optimal solution. It can converge upon local optima. It uses a greedy strategy by selecting the locally best attribute to split the dataset on each iteration. The algorithm's optimality can be improved by using backtracking during the search for the optimal decision tree at the cost of possibly taking longer. ID3 can overfit the training data. To avoid overfitting, smaller decision trees should be preferred over larger ones. This algorithm usually produces small trees, but it does not always produce the smallest possible decision tree. ID3 is harder to use on continuous data than on factored data (factored data has a discrete number of possible values, thus reducing the possible branch points). If the values of any given attribute are continuous, then there are many more places to split the data on this attribute, and searching for the best value to split by can be time-consuming. === Usage === The ID3 algorithm is used by training on a data set S {\displaystyle S} to produce a decision tree which is stored in memory. At runtime, this decision tree is used to classify new test cases (feature vectors) by traversing the decision tree using the features of the datum to arrive at a leaf node. == The ID3 metrics == === Entropy === Entropy H ( S ) {\displaystyle \mathrm {H} {(S)}} is a measure of the amount of uncertainty in the (data) set S {\displaystyle S} (i.e. entropy characterizes the (data) set S {\displaystyle S} ). H ( S ) = ∑ x ∈ X − p ( x ) log 2 ⁡ p ( x ) {\displaystyle \mathrm {H} {(S)}=\sum _{x\in X}{-p(x)\log _{2}p(x)}} Where, S {\displaystyle S} – The current dataset for which entropy is being calculated This changes at each step of the ID3 algorithm, either to a subset of the previous set in the case of splitting on an attribute or to a "sibling" partition of the parent in case the recursion terminated previously. X {\displaystyle X} – The set of classes in S {\displaystyle S} p ( x ) {\displaystyle p(x)} – The proportion of the number of elements in class x {\displaystyle x} to the number of elements in set S {\displaystyle S} When H ( S ) = 0 {\displaystyle \mathrm {H} {(S)}=0} , the set S {\displaystyle S} is perfectly classified (i.e. all elements in S {\displaystyle S} are of the same class). In ID3, entropy is calculated for each remaining attribute. The attribute with the smallest entropy is used to split the set S {\displaystyle S} on this iteration. Entropy in information theory measures how much information is expected to be gained upon measuring a random variable; as such, it can also be used to quantify the amount to which the distribution of the quantity's values is unknown. A constant quantity has zero entropy, as its distribution is perfectly known. In contrast, a uniformly distributed random variable (discretely or continuously uniform) maximizes entropy. Therefore, the greater the entropy at a node, the less information is known about the classification of data at this stage of the tree; and therefore, the greater the potential to improve the classification here. As such, ID3 is a greedy heuristic performing a best-first search for locally optimal entropy values. Its accuracy can be improved by preprocessing the data. === Information gain === Information gain I G ( A ) {\displaystyle IG(A)} is the measure of the difference in entropy from before to after the set S {\displaystyle S} is split on an attribute A {\displaystyle A} . In other words, how much uncertainty in S {\displaystyle S} was reduced after splitting set S {\displaystyle S} on attribute A {\displaystyle A} . I G ( S , A ) = H ( S ) − ∑ t ∈ T p ( t ) H ( t ) = H ( S ) − H ( S | A ) . {\displaystyle IG(S,A)=\mathrm {H} {(S)}-\sum _{t\in T}p(t)\mathrm {H} {(t)}=\mathrm {H} {(S)}-\mathrm {H} {(S|A)}.} Where, H ( S ) {\displaystyle \mathrm {H} (S)} – Entropy of set S {\displaystyle S} T {\displaystyle T} – The subsets created from splitting set S {\displaystyle S} by attribute A {\displaystyle A} such that S = ⋃ t ∈ T t {\displaystyle S=\bigcup _{t\in T}t} p ( t ) {\displaystyle p(t)} – The proportion of the number of elements in t {\displaystyle t} to the number of elements in set S {\displaystyle S} H ( t ) {\displaystyle \mathrm {H} (t)} – Entropy of subset t {\displaystyle t} In ID3, information gain can be calculated (instead of entropy) for each remaining attribute. The attribute with the largest information gain is used to split the set S {\displaystyle S} on this iteration.
Read more →
Pwnie Awards

The Pwnie Awards are an annual awards ceremony that recognizes both excellence and incompetence in the field of information security, described by SecurityWeek as an event that "recognizes excellence and mocks incompetence in cybersecurity." Winners are selected by a committee of security industry professionals from nominations collected from the information security community. Nominees are announced yearly at Summercon, and the awards themselves are presented at the Black Hat Security Conference. == Origins == The name Pwnie Award is based on the word "pwn", which is hacker slang meaning to "compromise" or "control" based on the previous usage of the word "own" (and it is pronounced similarly). The name "The Pwnie Awards," pronounced as "Pony," is meant to sound like the Tony Awards, an awards ceremony for Broadway theater in New York City. == History == The Pwnie Awards were founded in 2007 by Alexander Sotirov and Dino Dai Zovi following discussions regarding Dino's discovery of a cross-platform QuickTime vulnerability (CVE-2007-2175) and Alexander's discovery of an ANI file processing vulnerability (CVE-2007-0038) in Internet Explorer. == Winners == === 2024 === Most Epic Fail: Crowdstrike for 2024 CrowdStrike incident Best Mobile Bug: Operation Triangulation Lamest Vendor Response: Xiaomi for obstructing Pwn2Own researchers from using their services Best Cryptographic Attack: GoFetch Best Desktop Bug: forcing realtime WebAudio playback in Chrome (CVE-2023-5996) Best Song: Touch Some Grass by UwU Underground Best Privilege Escalation: Windows Streaming Service UAF (CVE-2024-30089) by Valentina Palmiotti (chompie) Best Remote Code Execution: Microsoft Message Queuing (MSMQ) Remote Code Execution Vulnerability (CVE-2024-30080) Most Epic Achievement: Discovery and reverse engineering of the XZ Utils backdoor Most Innovative Research: Let the Cache Cache and Let the WebAssembly Assemble: Knocking’ on Chrome’s Shell by Edouard Bochin, Tao Yan, and Bo Qu Most Underhyped Research: See No Eval: Runtime Dynamic Code Execution in Objective-C === 2023 === Best Desktop Bug: CountExposure! by RyeLv(@b2ahex) Best Cryptographic Attack: Video-based cryptanalysis: Extracting Cryptographic Keys from Video Footage of a Device’s Power LED by Ben Nassi, Etay Iluz, Or Cohen, Ofek Vayner, Dudi Nassi, Boris Zadov, Yuval Elovici Best Song: Clickin’ Most Innovative Research: Inside Apple’s Lightning: Jtagging the iPhone for Fuzzing and Profit Most Under-Hyped Research: Activation Context Cache Poisoning Best Privilege Escalation Bug: URB Excalibur: Slicing Through the Gordian Knot of VMware VM Escapes Best Remote Code Execution Bug: ClamAV RCE Lamest Vendor Response: Three Lessons From Threema: Analysis of a Secure Messenger Most Epic Fail: “Holy fucking bingle, we have the no fly list,” Epic Achievement: Clement Lecigne: 0-days hunter world champion Lifetime Achievement Award: Mudge === 2022 === Lamest Vendor Response: Google's "TAG" response team for "unilaterally shutting down a counterterrorism operation." Epic Achievement: Yuki Chen’s Windows Server-Side RCE Bugs Most Epic Fail: HackerOne Employee Caught Stealing Vulnerability Reports for Personal Gains Best Desktop Bug: Pietro Borrello, Andreas Kogler, Martin Schwarzl, Moritz Lipp, Daniel Gruss, Michael Schwarz for Architecturally Leaking Data from the Microarchitecture Most Innovative Research: Pietro Borrello, Martin Schwarzl, Moritz Lipp, Daniel Gruss, Michael Schwarz for Custom Processing Unit: Tracing and Patching Intel Atom Microcode Best Cryptographic Attack: Hertzbleed: Turning Power Side-Channel Attacks Into Remote Timing Attacks on x86 by Yingchen Wang, Riccardo Paccagnella, Elizabeth Tang He, Hovav Shacham, Christopher Fletcher, David Kohlbrenner Best Remote Code Execution Bug: KunlunLab for Windows RPC Runtime Remote Code Execution (CVE-2022-26809) Best Privilege Escalation Bug: Qidan He of Dawnslab, for Mystique in the House: The Droid Vulnerability Chain That Owns All Your Userspace Best Mobile Bug: FORCEDENTRY Most Under-Hyped Research: Yannay Livneh for Spoofing IP with IPIP Best Song: Dialed Up by Project Mammoth === 2021 === Lamest Vendor Response: Cellebrite, for their response to Moxie, the creator of Signal, reverse-engineering their UFED and accompanying software and reporting a discovered exploit. Epic Achievement: Ilfak Guilfanov, in honor of IDA's 30th Anniversary. Best Privilege Escalation Bug: Baron Samedit of Qualys, for the discovery of a 10-year-old exploit in sudo. Best Song: The Ransomware Song by Forrest Brazeal Best Server-Side Bug: Orange Tsai, for his Microsoft Exchange Server ProxyLogon attack surface discoveries. Best Cryptographic Attack: The NSA for its disclosure of a bug in the verification of signatures in Windows which breaks the certificate trust chain. Most Innovative Research: Enes Göktaş, Kaveh Razavi, Georgios Portokalidis, Herbert Bos, and Cristiano Giuffrida at VUSec for their research on the "BlindSide" Attack. Most Epic Fail: Microsoft, for their failure to fix PrintNightmare. Best Client-Side Bug: Gunnar Alendal's discovery of a buffer overflow on the Samsung Galaxy S20's secure chip. Most Under-Hyped Research: The Qualys Research Team for 21Nails, 21 vulnerabilities in Exim, the Internet's most popular mail server. === 2020 === Best Server-Side Bug: BraveStarr (CVE-2020-10188) – A Fedora 31 netkit telnetd remote exploit (Ronald Huizer') Best Privilege Escalation Bug: checkm8 – A permanent unpatchable USB bootrom exploit for a billion iOS devices. (axi0mX) Epic Achievement: "Remotely Rooting Modern Android Devices" (Guang Gong) Best Cryptographic Attack: Zerologon vulnerability (Tom Tervoort, CVE-2020-1472) Best Client-Side Bug: RCE on Samsung Phones via MMS (CVE-2020-8899 and -16747), a zero click remote execution attack. (Mateusz Jurczyk) Most Under-Hyped Research: Vulnerabilities in System Management Mode (SMM) and Trusted Execution Technology (TXT) (CVE-2019-0151 and -0152) (Gabriel Negreira Barbosa, Rodrigo Rubira Branco, Joe Cihula) Most Innovative Research: TRRespass: When Memory Vendors Tell You Their Chips Are Rowhammer-free, They Are Not. (Pietro Frigo, Emanuele Vannacci, Hasan Hassan, Victor van der Veen, Onur Mutlu, Cristiano Giuffrida, Herbert Bos, Kaveh Razavi) Most Epic Fail: Microsoft; for the implementation of Elliptic-curve signatures which allowed attackers to generate private pairs for public keys of any signer, allowing HTTPS and signed binary spoofing. (CVE-2020-0601) Best Song: Powertrace by Rebekka Aigner, Daniel Gruss, Manuel Weber, Moritz Lipp, Patrick Radkohl, Andreas Kogler, Maria Eichlseder, ElTonno, tunefish, Yuki and Kater Lamest Vendor Response: Daniel J. Bernstein (CVE-2005-1513) === 2019 === Best Server-Side Bug: Orange Tsai and Meh Chang, for their SSL VPN research. Most Innovative Research: Vectorized Emulation Brandon Falk Best Cryptographic Attack: \m/ Dr4g0nbl00d \m/ Mathy Vanhoef, Eyal Ronen Lamest Vendor Response: Bitfi Most Over-hyped Bug: Allegations of Supermicro hardware backdoors, Bloomberg Most Under-hyped Bug: Thrangrycat, (Jatin Kataria, Red Balloon Security) === 2018 === Most Innovative Research: Spectre/Meltdown (Paul Kocher, Jann Horn, Anders Fogh, Daniel Genkin, Daniel Gruss, Werner Haas, Mike Hamburg, Moritz Lipp, Stefan Mangard, Thomas Prescher, Michael Schwarz, Yuval Yarom) Best Privilege Escalation Bug: Spectre/Meltdown (Paul Kocher, Jann Horn, Anders Fogh, Daniel Genkin, Daniel Gruss, Werner Haas, Mike Hamburg, Moritz Lipp, Stefan Mangard, Thomas Prescher, Michael Schwarz, Yuval Yarom) Lifetime Achievement: Michał Zalewski Best Cryptographic Attack: ROBOT - Return Of Bleichenbacher’s Oracle Threat Hanno Böck, Juraj Somorovsky, Craig Young Lamest Vendor Response: Bitfi hardware crypto-wallet, after the "unhackable" device was hacked to extract the keys required to steal coins and rooted to play Doom. === 2017 === Epic Achievement: Federico Bento for Finally getting TIOCSTI ioctl attack fixed Most Innovative Research: ASLR on the line Ben Gras, Kaveh Razavi, Erik Bosman, Herbert Bos, Cristiano Giuffrida Best Privilege Escalation Bug: DRAMMER Victor van der Veen, Yanick Fratantonio, Martina Lindorfer, Daniel Gruss, Clementine Maurice, Giovanni Vigna, Herbert Bos, Kaveh Razavi, Cristiano Giuffrida Best Cryptographic Attack: The first collision for full SHA-1 Marc Stevens, Elie Bursztein, Pierre Karpman, Ange Albertini, Yarik Markov Lamest Vendor Response: Lennart Poettering - for mishandling security vulnerabilities most spectacularly for multiple critical Systemd bugs Best Song: Hello (From the Other Side) - Manuel Weber, Michael Schwarz, Daniel Gruss, Moritz Lipp, Rebekka Aigner === 2016 === Most Innovative Research: Dedup Est Machina: Memory Deduplication as an Advanced Exploitation Vector Erik Bosman, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida Lifetime Achievement: Peiter Zatko aka Mudge Best Cryptographic Attack: DROWN attack Nimrod Aviram et al. Best Song: Cyberlier - Katie Mous
Read more →
Persian Speech Corpus

The Persian Speech Corpus is a Modern Persian speech corpus for speech synthesis. The corpus contains phonetic and orthographic transcriptions of about 2.5 hours of Persian speech aligned with recorded speech on the phoneme level, including annotations of word boundaries. Previous spoken corpora of Persian include FARSDAT, which consists of read aloud speech from newspaper texts from 100 Persian speakers and the Telephone FARsi Spoken language DATabase (TFARSDAT) which comprises seven hours of read and spontaneous speech produced by 60 native speakers of Persian from ten regions of Iran. The Persian Speech Corpus was built using the same methodologies laid out in the doctoral project on Modern Standard Arabic of Nawar Halabi at the University of Southampton. The work was funded by MicroLinkPC, who own an exclusive license to commercialise the corpus, though the corpus is available for non-commercial use through the corpus' website. It is distributed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. The corpus was built for speech synthesis purposes, but has been used for building HMM based voices in Persian. It can also be used to automatically align other speech corpora with their phonetic transcript and could be used as part of a larger corpus for training speech recognition systems. == Contents == The corpus is downloadable from its website, and contains the following: 396 .wav files containing spoken utterances 396 .lab files containing text utterances 396 .TextGrid files containing the phoneme labels with time stamps of the boundaries where these occur in the .wav files. phonetic-transcript.txt which has the form "[wav_filename]" "[Phoneme Sequence]" in every line orthographic-transcript.txt which has the form "[wav_filename]" "[Orthographic Transcript]" in every line
Read more →
Markov blanket

In statistics and machine learning, a Markov blanket of a random variable is a set of variables that renders the variable conditionally independent of all other variables in the system. This concept is central in probabilistic graphical models and feature selection. If a Markov blanket is minimal—meaning that no variable in it can be removed without losing this conditional independence—it is called a Markov boundary. Identifying a Markov blanket or boundary allows for efficient inference and helps isolate relevant variables for prediction or causal reasoning. The terms Markov blanket and Markov boundary were coined by Judea Pearl in 1988. A Markov blanket may be derived from the structure of a probabilistic graphical model such as a Bayesian network or Markov random field. == Definition == A Markov blanket of a random variable Y {\displaystyle Y} in a random variable set S = { X 1 , … , X n } {\displaystyle {\mathcal {S}}=\{X_{1},\ldots ,X_{n}\}} is any subset S 1 {\displaystyle {\mathcal {S}}_{1}} of S {\displaystyle {\mathcal {S}}} , conditioned on which other variables are independent with Y {\displaystyle Y} : Y ⊥ ⊥ S ∖ S 1 ∣ S 1 {\displaystyle Y\perp \!\!\!\perp {\mathcal {S}}\smallsetminus {\mathcal {S}}_{1}\mid {\mathcal {S}}_{1}} It means that S 1 {\displaystyle {\mathcal {S}}_{1}} contains at least all the information one needs to infer Y {\displaystyle Y} , where the variables in S ∖ S 1 {\displaystyle {\mathcal {S}}\smallsetminus {\mathcal {S}}_{1}} are redundant. In general, a given Markov blanket is not unique. Any set in S {\displaystyle {\mathcal {S}}} that contains a Markov blanket is also a Markov blanket itself. Specifically, S {\displaystyle {\mathcal {S}}} is a Markov blanket of Y {\displaystyle Y} in S {\displaystyle {\mathcal {S}}} . === Example === In a Bayesian network, the Markov blanket of a node consists of its parents, its children, and its children's other parents (i.e., co-parents). Knowing the values of these nodes makes the target node conditionally independent of the rest of the network. In a Markov random field, the Markov blanket of a node is simply its immediate neighbors. == Markov condition == The concept of a Markov blanket is rooted in the Markov condition, which states that in a probabilistic graphical model, each variable is conditionally independent of its non-descendants given its parents. This condition implies the existence of a minimal separating set — the Markov blanket — that shields a variable from the rest of the network. For instance, when a person holds an object stationary against gravity, the object’s acceleration is fully determined by its direct causes—namely, the upward force from the hand and the downward gravitational pull. Other variables such as air pressure or temperature are causally irrelevant. == Markov boundary == A Markov boundary of Y {\displaystyle Y} in S {\displaystyle {\mathcal {S}}} is a subset S 2 {\displaystyle {\mathcal {S}}_{2}} of S {\displaystyle {\mathcal {S}}} , such that S 2 {\displaystyle {\mathcal {S}}_{2}} itself is a Markov blanket of Y {\displaystyle Y} , but any proper subset of S 2 {\displaystyle {\mathcal {S}}_{2}} is not a Markov blanket of Y {\displaystyle Y} . In other words, a Markov boundary is a minimal Markov blanket. The Markov boundary of a node A {\displaystyle A} in a Bayesian network is the set of nodes composed of A {\displaystyle A} 's parents, A {\displaystyle A} 's children, and A {\displaystyle A} 's children's other parents. In a Markov random field, the Markov boundary for a node is the set of its neighboring nodes. In a dependency network, the Markov boundary for a node is the set of its parents. === Uniqueness of Markov boundary === The Markov boundary always exists. Under some mild conditions, the Markov boundary is unique. However, for most practical and theoretical scenarios multiple Markov boundaries may provide alternative solutions. When there are multiple Markov boundaries, quantities measuring causal effect could fail. == In cognitive science == In the study of consciousness, brain function, and complex adaptive systems, Markov blankets are proposed as a mathematical mechanism which delimits the extent of cognitive entities, whether it be physical or causal.
Read more →
XGBoost

XGBoost (eXtreme Gradient Boosting) is an open-source software library which provides a regularizing gradient boosting framework for C++, Java, Python, R, Julia, Perl, and Scala. It works on Linux, Microsoft Windows, and macOS. From the project description, it aims to provide a "Scalable, Portable and Distributed Gradient Boosting (GBM, GBRT, GBDT) Library". It runs on a single machine, as well as the distributed processing frameworks Apache Hadoop, Apache Spark, Apache Flink, and Dask. XGBoost gained much popularity and attention in the mid-2010s as the algorithm of choice for many winning teams of machine learning competitions. == History == XGBoost initially started as a research project by Tianqi Chen as part of the Distributed (Deep) Machine Learning Community (DMLC) group at the University of Washington. Initially, it began as a terminal application which could be configured using a libsvm configuration file. It became well known in the ML competition circles after its use in the winning solution of the Higgs Machine Learning Challenge. Soon after, the Python and R packages were built, and XGBoost now has package implementations for Java, Scala, Julia, Perl, and other languages. This brought the library to more developers and contributed to its popularity among the Kaggle community, where it has been used for a large number of competitions. It was soon integrated with a number of other packages making it easier to use in their respective communities. It has now been integrated with scikit-learn for Python users and with the caret package for R users. It can also be integrated into Data Flow frameworks like Apache Spark, Apache Hadoop, and Apache Flink using the abstracted Rabit and XGBoost4J. XGBoost is also available on OpenCL for FPGAs. An efficient, scalable implementation of XGBoost has been published by Tianqi Chen and Carlos Guestrin. While the XGBoost model often achieves higher accuracy than a single decision tree, it sacrifices the intrinsic interpretability of decision trees. For example, following the path that a decision tree takes to make its decision is trivial and self-explained, but following the paths of hundreds or thousands of trees is much harder. == Features == Salient features of XGBoost which make it different from other gradient boosting algorithms include: Clever penalization of trees A proportional shrinking of leaf nodes Newton Boosting Extra randomization parameter Implementation on single, distributed systems and out-of-core computation Automatic feature selection Theoretically justified weighted quantile sketching for efficient computation Parallel tree structure boosting with sparsity Efficient cacheable block structure for decision tree training == The algorithm == XGBoost works as Newton–Raphson in function space unlike gradient boosting that works as gradient descent in function space, a second order Taylor approximation is used in the loss function to make the connection to Newton–Raphson method. A generic unregularized XGBoost algorithm is: == Parameters == XGBoost has parameters which can be specified to affect how it functions and performs. Some parameters include: Learning rate (also known as the "step size" or “"shrinkage"), it is a number between 0 and 1 (default is 0.3), which determines the rate the algorithm learns from each iteration. n_estimators, sets the number of trees to be built in the ensemble, where more trees generally increases the complexity of the model, but can lead to overfitting with too many trees. Gamma (also known as Lagrange multiplier or the minimum loss reduction parameter), controls the minimum amount of loss reduction required to make a further split on a leaf node of the tree. The default in XGBoost is 0 . max_depth, represents how deeply each tree in the boosting process can grow during training, where the default is 6. == Awards == John Chambers Award (2016) High Energy Physics meets Machine Learning award (HEP meets ML) (2016)
Read more →
Single particle analysis

Single particle analysis is a group of related computerized image processing techniques used to analyze images from transmission electron microscopy (TEM). These methods were developed to improve and extend the information obtainable from TEM images of particulate samples, typically proteins or other large biological entities such as viruses. Individual images of stained or unstained particles are very noisy, making interpretation difficult. Combining several digitized images of similar particles together gives an image with stronger and more easily interpretable features. An extension of this technique uses single particle methods to build up a three-dimensional reconstruction of the particle. Using cryo-electron microscopy it has become possible to generate reconstructions with sub-nanometer, near-atomic resolution resolution first in the case of highly symmetric viruses, and now in smaller, asymmetric proteins as well. == Techniques == Single particle analysis can be done on both negatively stained and vitreous ice-embedded transmission electron cryomicroscopy (CryoTEM) samples. Single particle analysis methods are, in general, reliant on the sample being homogeneous, although techniques for dealing with conformational heterogeneity are being developed. Images (micrographs) are taken with an electron microscope using charged-coupled device (CCD) detectors coupled to a phosphorescent layer (in the past, they were instead collected on film and digitized using high-quality scanners). The image processing is carried out using specialized software programs, often run on multi-processor computer clusters. Depending on the sample or the desired results, various steps of two- or three-dimensional processing can be done. === Alignment and classification === Biological samples, and especially samples embedded in thin vitreous ice, are highly radiation sensitive, thus only low electron doses can be used to image the sample. This low dose, as well as variations in the metal stain used (if used) means images have high noise relative to the signal given by the particle being observed. By aligning several similar images to each other so they are in register and then averaging them, an image with higher signal-to-noise ratio can be obtained. As the noise is mostly randomly distributed and the underlying image features constant, by averaging the intensity of each pixel over several images only the constant features are reinforced. Typically, the optimal alignment (a translation and an in-plane rotation) to map one image onto another is calculated by cross-correlation. However, a micrograph often contains particles in multiple different orientations and/or conformations, and so to get more representative image averages, a method is required to group similar particle images together into multiple sets. This is normally carried out using one of several data analysis and image classification algorithms, such as multi-variate statistical analysis and hierarchical ascendant classification, or k-means clustering. Often data sets of tens of thousands of particle images are used, and to reach an optimal solution an iterative procedure of alignment and classification is used, whereby strong image averages produced by classification are used as reference images for a subsequent alignment of the whole data set. === Image filtering === Image filtering (band-pass filtering) is often used to reduce the influence of high and/or low spatial frequency information in the images, which can affect the results of the alignment and classification procedures. This is particularly useful in negative stain images. The algorithms make use of fast Fourier transforms (FFT), often employing Gaussian shaped soft-edged masks in reciprocal space to suppress certain frequency ranges. High-pass filters remove low spatial frequencies (such as ramp or gradient effects), leaving the higher frequencies intact. Low-pass filters remove high spatial frequency features and have a blurring effect on fine details. === Contrast transfer function === Due to the nature of image formation in the electron microscope, bright-field TEM images are obtained using significant underfocus. This, along with features inherent in the microscope's lens system, creates blurring of the collected images visible as a point spread function. The combined effects of the imaging conditions are known as the contrast transfer function (CTF), and can be approximated mathematically as a function in reciprocal space. Specialized image processing techniques such as phase flipping and amplitude correction / Wiener filtering can (at least partially) correct for the CTF, and allow high resolution reconstructions. === Three-dimensional reconstruction === Transmission electron microscopy images are projections of the object showing the distribution of density through the object, similar to medical X-rays. By making use of the projection-slice theorem a three-dimensional reconstruction of the object can be generated by combining many images (2D projections) of the object taken from a range of viewing angles. Proteins in vitreous ice ideally adopt a random distribution of orientations (or viewing angles), allowing a fairly isotropic reconstruction if a large number of particle images are used. This contrasts with electron tomography, where the viewing angles are limited due to the geometry of the sample/imaging set up, giving an anisotropic reconstruction. Filtered back projection is a commonly used method of generating 3D reconstructions in single particle analysis, although many alternative algorithms exist. Before a reconstruction can be made, the orientation of the object in each image needs to be estimated. Several methods have been developed to work out the relative Euler angles of each image. Some are based on common lines (common 1D projections and sinograms), others use iterative projection matching algorithms. The latter works by beginning with a simple, low resolution 3D starting model and compares the experimental images to projections of the model and creates a new 3D to bootstrap towards a solution. Methods are also available for making 3D reconstructions of helical samples (such as tobacco mosaic virus), taking advantage of the inherent helical symmetry. Both real space methods (treating sections of the helix as single particles) and reciprocal space methods (using diffraction patterns) can be used for these samples. === Tilt methods === The specimen stage of the microscope can be tilted (typically along a single axis), allowing the single particle technique known as random conical tilt. An area of the specimen is imaged at both zero and at high angle (~60-70 degrees) tilts, or in the case of the related method of orthogonal tilt reconstruction, +45 and −45 degrees. Pairs of particles corresponding to the same object at two different tilts (tilt pairs) are selected, and by following the parameters used in subsequent alignment and classification steps a three-dimensional reconstruction can be generated relatively easily. This is because the viewing angle (defined as three Euler angles) of each particle is known from the tilt geometry. 3D reconstructions from random conical tilt suffer from missing information resulting from a restricted range of orientations. Known as the missing cone (due to the shape in reciprocal space), this causes distortions in the 3D maps. However, the missing cone problem can often be overcome by combining several tilt reconstructions. Tilt methods are best suited to negatively stained samples, and can be used for particles that adsorb to the carbon support film in preferred orientations. The phenomenon known as charging or beam-induced movement makes collecting high-tilt images of samples in vitreous ice challenging. === Map visualization and fitting === Various software programs are available that allow viewing the 3D maps. These often enable the user to manually dock in protein coordinates (structures from X-ray crystallography, NMR, or a computational model such as one found in the AlphaFold Protein Structure Database) of subunits into the electron density. Several programs can also fit subunits computationally; as of the 2020s using these programs tend to produce better accuracy than manual docking because they can perform labor-intensive tasks such as: The scale of SPA-derived maps depends on knowing the pixel size (angstorms per pixel), which is not always accurate. Programs can automatically correct for this difference by using coordinate data or by using knowledge of chemical bonds. Many proteins are made up of several roughly rigid protein domains linked by flexible parts. Pre-existing coordinate data, whether experimental or computational, may not exactly match the inter-domain positioning of the cyro-EM map. Modern programs can automatically "chop" pre-existing coordinate data into individual domains and fit them in individually. For higher-resolution structures, it is pos
Read more →
KXEN Inc.

KXEN was an American software company which existed from 1998 to 2013 when it was acquired by SAP AG. == History == KXEN was founded in June 1998 by Roger Haddad and Michel Bera. It was based in San Francisco, California with offices in Paris and London. On September 10, 2013, SAP AG announced plans to acquire KXEN. On October 1, 2013, a letter to KXEN customers announced the acquisition closed. KXEN primarily marketed predictive analytics software. == Predictive analytics == InfiniteInsight is a predictive modeling suite developed by KXEN that assists analytic professionals, and business executives to extract information from data. Among other functions, InfiniteInsight is used for variable importance, classification, regression, segmentation, time series, product recommendation, as described and expressed by the Java Data Mining interface, and for social network analysis. InfiniteInsight allows prediction of a behavior or a value, the forecast of a time series or the understanding of a group of individuals with similar behavior. Advanced functions include behavioral modeling, exporting the model code into different target environments or building predictive models on top of SAS or SPSS data files. Competitors are SAS Enterprise Miner, IBM SPSS Modeler, and Statistica. Open source predictive tools like the R package or Weka are also competitors, since they provide similar features free of charge.
Read more →
Multidimensional scaling

Multidimensional scaling (MDS) is a means of visualizing the level of similarity of individual cases of a data set. MDS is used to translate distances between each pair of n {\textstyle n} objects in a set into a configuration of n {\textstyle n} points mapped into an abstract Cartesian space. More technically, MDS refers to a set of related ordination techniques used in information visualization, in particular to display the information contained in a distance matrix. It is a form of non-linear dimensionality reduction. Given a distance matrix with the distances between each pair of objects in a set, and a chosen number of dimensions, N, an MDS algorithm places each object into N-dimensional space (a lower-dimensional representation) such that the between-object distances are preserved as well as possible. For N = 1, 2, and 3, the resulting points can be visualized on a scatter plot. Core theoretical contributions to MDS were made by James O. Ramsay of McGill University, who is also regarded as the founder of functional data analysis. == Types == MDS algorithms fall into a taxonomy, depending on the meaning of the input matrix: === Classical multidimensional scaling === It is also known as Principal Coordinates Analysis (PCoA), Torgerson Scaling or Torgerson–Gower scaling. It takes an input matrix giving dissimilarities between pairs of items and outputs a coordinate matrix whose configuration minimizes a loss function called strain, which is given by Strain D ( x 1 , x 2 , . . . , x n ) = ( ∑ i , j ( b i j − x i T x j ) 2 ∑ i , j b i j 2 ) 1 / 2 , {\displaystyle {\text{Strain}}_{D}(x_{1},x_{2},...,x_{n})={\Biggl (}{\frac {\sum _{i,j}{\bigl (}b_{ij}-x_{i}^{T}x_{j}{\bigr )}^{2}}{\sum _{i,j}b_{ij}^{2}}}{\Biggr )}^{1/2},} where x i {\displaystyle x_{i}} denote vectors in N-dimensional space, x i T x j {\displaystyle x_{i}^{T}x_{j}} denotes the scalar product between x i {\displaystyle x_{i}} and x j {\displaystyle x_{j}} , and b i j {\displaystyle b_{ij}} are the elements of the matrix B {\displaystyle B} defined on step 2 of the following algorithm, which are computed from the distances. Steps of a Classical MDS algorithm: Classical MDS uses the fact that the coordinate matrix X {\displaystyle X} can be derived by eigenvalue decomposition from B = X X ′ {\textstyle B=XX'} . And the matrix B {\textstyle B} can be computed from proximity matrix D {\textstyle D} by using double centering. Set up the squared proximity matrix D ( 2 ) = [ d i j 2 ] {\textstyle D^{(2)}=[d_{ij}^{2}]} Apply double centering: B = − 1 2 C D ( 2 ) C {\textstyle B=-{\frac {1}{2}}CD^{(2)}C} using the centering matrix C = I − 1 n J n {\textstyle C=I-{\frac {1}{n}}J_{n}} , where n {\textstyle n} is the number of objects, I {\textstyle I} is the n × n {\textstyle n\times n} identity matrix, and J n {\textstyle J_{n}} is an n × n {\textstyle n\times n} matrix of all ones. Determine the m {\textstyle m} largest eigenvalues λ 1 , λ 2 , . . . , λ m {\textstyle \lambda _{1},\lambda _{2},...,\lambda _{m}} and corresponding eigenvectors e 1 , e 2 , . . . , e m {\textstyle e_{1},e_{2},...,e_{m}} of B {\textstyle B} (where m {\textstyle m} is the number of dimensions desired for the output). Now, X = E m Λ m 1 / 2 {\textstyle X=E_{m}\Lambda _{m}^{1/2}} , where E m {\textstyle E_{m}} is the matrix of m {\textstyle m} eigenvectors and Λ m {\textstyle \Lambda _{m}} is the diagonal matrix of m {\textstyle m} eigenvalues of B {\textstyle B} . Classical MDS assumes metric distances. So this is not applicable for direct dissimilarity ratings. === Metric multidimensional scaling (mMDS) === It is a superset of classical MDS that generalizes the optimization procedure to a variety of loss functions and input matrices of known distances with weights and so on. A useful loss function in this context is called stress, which is often minimized using a procedure called stress majorization. Metric MDS minimizes the cost function called “stress” which is a residual sum of squares: Stress D ( x 1 , x 2 , . . . , x n ) = ∑ i ≠ j = 1 , . . . , n ( d i j − ‖ x i − x j ‖ ) 2 . {\displaystyle {\text{Stress}}_{D}(x_{1},x_{2},...,x_{n})={\sqrt {\sum _{i\neq j=1,...,n}{\bigl (}d_{ij}-\|x_{i}-x_{j}\|{\bigr )}^{2}}}.} Metric scaling uses a power transformation with a user-controlled exponent p {\textstyle p} : d i j p {\textstyle d_{ij}^{p}} and − d i j 2 p {\textstyle -d_{ij}^{2p}} for distance. In classical scaling p = 1. {\textstyle p=1.} Non-metric scaling is defined by the use of isotonic regression to nonparametrically estimate a transformation of the dissimilarities. === Non-metric multidimensional scaling (NMDS) === In contrast to metric MDS, non-metric MDS finds both a non-parametric monotonic relationship between the dissimilarities in the item-item matrix and the Euclidean distances between items, and the location of each item in the low-dimensional space. Let d i j {\displaystyle d_{ij}} be the dissimilarity between points i , j {\displaystyle i,j} . Let d ^ i j = ‖ x i − x j ‖ {\displaystyle {\hat {d}}_{ij}=\|x_{i}-x_{j}\|} be the Euclidean distance between embedded points x i , x j {\displaystyle x_{i},x_{j}} . Now, for each choice of the embedded points x i {\displaystyle x_{i}} and is a monotonically increasing function f {\displaystyle f} , define the "stress" function: S ( x 1 , . . . , x n ; f ) = ∑ i < j ( f ( d i j ) − d ^ i j ) 2 ∑ i < j d ^ i j 2 . {\displaystyle S(x_{1},...,x_{n};f)={\sqrt {\frac {\sum _{i Read more →
NETtalk (artificial neural network)

NETtalk is an artificial neural network that learns to pronounce written English text by supervised learning. It takes English text as input, and produces a matching phonetic transcriptions as output. It is the result of research carried out in the mid-1980s by Terrence Sejnowski and Charles Rosenberg. The intent behind NETtalk was to construct simplified models that might shed light on the complexity of learning human level cognitive tasks, and their implementation as a connectionist model that could also learn to perform a comparable task. The authors trained it by backpropagation. The network was trained on a large amount of English words and their corresponding pronunciations, and is able to generate pronunciations for unseen words with a high level of accuracy. The output of the network was a stream of phonemes, which fed into DECtalk to produce audible speech. It achieved popular success, appearing on the Today show. From the point of view of modeling human cognition, NETtalk does not specifically model the image processing stages and letter recognition of the visual cortex. Rather, it assumes that the letters have been pre-classified and recognized. It is NETtalk's task to learn proper associations between the correct pronunciation with a given sequence of letters based on the context in which the letters appear. A similar architecture was subsequently used for the opposite task, that of converting continuous speech signal to a phoneme sequence. == Training == The training dataset was a 20,008-word subset of the Brown Corpus, with manually annotated phoneme and stress for each letter. The development process was described in a 1993 interview. It took three months -- 250 person-hours -- to create the training dataset, but only a few days to train the network. After it was run successfully on this, the authors tried it on a phonological transcription of an interview with a young Latino boy from a barrio in Los Angeles. This resulted in a network that reproduced his Spanish accent. The original NETtalk was implemented on a Ridge 32, which took 0.275 seconds per learning step (one forward and one backward pass). Training NETtalk became a benchmark to test for the efficiency of backpropagation programs. For example, an implementation on Connection Machine-1 (with 16384 processors) ran at 52x speedup. An implementation on a 10-cell Warp ran at 340x speedup. The following table compiles the benchmark scores as of 1988. Speed is measured in "millions of connections per second" (MCPS). For example, the original NETtalk on Ridge 32 took 0.275 seconds per forward-backward pass, giving 18629 / 10 6 0.275 = 0.068 {\displaystyle {\frac {18629/10^{6}}{0.275}}=0.068} MCPS. Relative times are normalized to the MicroVax. == Architecture == The network had three layers and 18,629 adjustable weights, large by the standards of 1986. There were worries that it would overfit the dataset, but it was trained successfully. The input of the network has 203 units, divided into 7 groups of 29 units each. Each group is a one-hot encoding of one character. There are 29 possible characters: 26 letters, comma, period, and word boundary (whitespace). To produce the pronunciation of a single character, the network takes the character itself, as well as 3 characters before and 3 characters after it. The hidden layer has 80 units. The output has 26 units. 21 units encode for articulatory features (point of articulation, voicing, vowel height, etc.) of phonemes, and 5 units encode for stress and syllable boundaries. Sejnowski studied the learned representation in the network, and found that phonemes that sound similar are clustered together in representation space. The output of the network degrades, but remains understandable, when some hidden neurons are removed.
Read more →
Artificial intelligence content detection

Artificial intelligence detection software aims to determine whether some content (text, image, video, or audio) was generated using artificial intelligence (AI). This software is often unreliable. == Accuracy issues == Many AI detection tools have been shown to be unreliable in detecting AI-generated text. In a 2023 study conducted by Weber-Wulff et al., researchers evaluated 14 detection tools including Turnitin and GPTZero and found that "all scored below 80% of accuracy and only 5 over 70%." They also found that these tools tend to have a bias for classifying texts more as human than as AI, and that accuracy of these tools worsens upon paraphrasing. === False positives === In AI content detection, a false positive is when human-written work is incorrectly flagged as AI-written. Many AI detection platforms claim to have a minimal level of false positives, with Turnitin claiming a less than 1% false positive rate. However, later research by The Washington Post produced much higher rates of 50%, though they used a smaller sample size. False positives in an academic setting frequently lead to accusations of academic misconduct, which can have serious consequences for a student's academic record. Additionally, studies have shown evidence that many AI detection models are prone to give false positives to work written by people whose first language is not English, and also to neurodivergent people. In June 2023, Janelle Shane wrote that portions of her book You Look Like a Thing and I Love You were flagged as AI-generated. === False negatives === A false negative is a failure to identify documents with AI-written text. False negatives often happen as a result of a detection software's sensitivity level or because evasive techniques were used when generating the work to make it sound more human. False negatives are less of a concern academically, since they aren't likely to lead to accusations and ramifications. Notably, Turnitin stated they have a 15% false negative rate. == Text detection == For text, this is usually done to prevent alleged plagiarism, often by detecting repetition of words as telltale signs that a text was AI-generated (including hallucinations). Detection systems may also rely on stylistic and structural regularities associated with LLM output, such as unusually consistent grammar, formulaic transitions, repeated discourse markers, and recurring rhetorical templates. Some tools are designed less to establish authorship provenance than to flag prose that resembles common LLM-generated style patterns. They are often used by teachers marking their students, usually on an ad hoc basis. Following the release of ChatGPT and similar AI text generative software, many educational establishments have issued policies against the use of AI by students. AI text detection software is also used by those assessing job applicants, as well as online search engines, hiring, online moderation and publishing. Current detectors may sometimes be unreliable and have incorrectly marked work by humans as originating from AI while failing to detect AI-generated work in other instances. MIT Technology Review said that the technology "struggled to pick up ChatGPT-generated text that had been slightly rearranged by humans and obfuscated by a paraphrasing tool". AI text detection software has also been shown to discriminate against non-native speakers of English. Two students from the University of California, Davis, were referred to the university's Office of Student Success and Judicial Affairs (OSSJA) after their professors scanned their essays with positive results; the first with an AI detector called GPTZero, and the second with an AI detector integration in Turnitin. However, following media coverage, and a thorough investigation, the students were cleared of any wrongdoing. In April 2023, Cambridge University and other members of the Russell Group of universities in the United Kingdom opted out of Turnitin's AI text detection tool, after expressing concerns it was unreliable. The University of Texas at Austin opted out of the system six months later. In May 2023, a professor at Texas A&M University–Commerce used ChatGPT to detect whether his students' content was written by it, which ChatGPT said was the case. As such, he threatened to fail the class despite ChatGPT not being able to detect AI-generated writing. No students were prevented from graduating because of the issue, and all but one student (who admitted to using the software) were exonerated from accusations of having used ChatGPT in their content. In July 2023, a paper titled "GPT detectors are biased against non-native English writers" was released, reporting that GPTs discriminate against non-native English authors. The paper compared seven GPT detectors against essays from both non-native English speakers and essays from United States students. The essays from non-native English speakers had an average false positive rate of 61.3%. An article by Thomas Germain, published on Gizmodo in June 2024, reported job losses among freelance writers and journalists due to AI text detection software mistakenly classifying their work as AI-generated. In September 2024, Common Sense Media reported that generative AI detectors had a 20% false positive rate for Black students, compared to 10% of Latino students and 7% of White students. To improve the reliability of AI text detection, researchers have explored digital watermarking techniques. A 2023 paper titled "A Watermark for Large Language Models" presents a method to embed imperceptible watermarks into text generated by large language models (LLMs). This watermarking approach allows content to be flagged as AI-generated with a high level of accuracy, even when text is slightly paraphrased or modified. The technique is designed to be subtle and hard to detect for casual readers, thereby preserving readability, while providing a detectable signal for those employing specialized tools. However, while promising, watermarking faces challenges in remaining robust under adversarial transformations and ensuring compatibility across different LLMs. == Anti text detection == There is software available designed to bypass AI text detection. In practice, evasion may not require specialized bypass tools. Paraphrasing, style editing, and removal of repeated discourse markers can substantially reduce the effectiveness of detectors that rely on recognizable surface patterns. A study published in August 2023 analyzed 20 abstracts from papers published in the Eye Journal, which were then paraphrased using GPT-4.0. The AI-paraphrased abstracts were examined for plagiarism using QueText and for AI-generated content using Originality.AI. The texts were then re-processed through an adversarial software called Undetectable.ai in order to reduce the AI-detection scores. The study found that the AI detection tool, Originality.AI, identified text generated by GPT-4 with a mean accuracy of 91.3%. However, after reprocessing by Undetectable.ai, the detection accuracy of Originality.ai dropped to a mean accuracy of 27.8%. Some experts also believe that techniques like digital watermarking are ineffective because they can be removed or added to trigger false positives. "A Watermark for Large Language Models" paper by Kirchenbauer et al. (2023) also addresses potential vulnerabilities of watermarking techniques. The authors outline a range of adversarial tactics, including text insertion, deletion, and substitution attacks, that could be used to bypass watermark detection. These attacks vary in complexity, from simple paraphrasing to more sophisticated approaches involving tokenization and homoglyph alterations. The study highlights the challenge of maintaining watermark robustness against attackers who may employ automated paraphrasing tools or even specific language model replacements to alter text spans iteratively while retaining semantic similarity. Experimental results show that although such attacks can degrade watermark strength, they also come at the cost of text quality and increased computational resources. == Image, video, and audio detection == Several purported AI image detection software exist, to detect AI-generated images (for example, those originating from Midjourney or DALL-E). They are not completely reliable. Industry analyses have also noted that AI-driven image recognition systems often struggle in real-world environments, where inconsistent lighting, noise and variable visual inputs reduce detection reliability, a challenge highlighted in modern agricultural quality-control research. Others claim to identify video and audio deepfakes, but this technology is also not fully reliable yet either. Despite debate around the efficacy of watermarking, Google DeepMind is actively developing a detection software called SynthID, which works by inserting a digital watermark that is invisible to the human eye into the pixels of an image.
Read more →
Elastic map

Elastic maps provide a tool for nonlinear dimensionality reduction. By their construction, they are a system of elastic springs embedded in the data space. This system approximates a low-dimensional manifold. The elastic coefficients of this system allow the switch from completely unstructured k-means clustering (zero elasticity) to the estimators located closely to linear PCA manifolds (for high bending and low stretching modules). With some intermediate values of the elasticity coefficients, this system effectively approximates non-linear principal manifolds. This approach is based on a mechanical analogy between principal manifolds, that are passing through "the middle" of the data distribution, and elastic membranes and plates. The method was developed by A.N. Gorban, A.Y. Zinovyev and A.A. Pitenko in 1996–1998. == Energy of elastic map == Let S {\displaystyle {\mathcal {S}}} be a data set in a finite-dimensional Euclidean space. Elastic map is represented by a set of nodes w j {\displaystyle {\bf {w}}_{j}} in the same space. Each datapoint s ∈ S {\displaystyle s\in {\mathcal {S}}} has a host node, namely the closest node w j {\displaystyle {\bf {w}}_{j}} (if there are several closest nodes then one takes the node with the smallest number). The data set S {\displaystyle {\mathcal {S}}} is divided into classes K j = { s | w j is a host of s } {\displaystyle K_{j}=\{s\ |\ {\bf {w}}_{j}{\mbox{ is a host of }}s\}} . The approximation energy D is the distortion D = 1 2 ∑ j = 1 k ∑ s ∈ K j ‖ s − w j ‖ 2 {\displaystyle D={\frac {1}{2}}\sum _{j=1}^{k}\sum _{s\in K_{j}}\|s-{\bf {w}}_{j}\|^{2}} , which is the energy of the springs with unit elasticity which connect each data point with its host node. It is possible to apply weighting factors to the terms of this sum, for example to reflect the standard deviation of the probability density function of any subset of data points { s i } {\displaystyle \{s_{i}\}} . On the set of nodes an additional structure is defined. Some pairs of nodes, ( w i , w j ) {\displaystyle ({\bf {w}}_{i},{\bf {w}}_{j})} , are connected by elastic edges. Call this set of pairs E {\displaystyle E} . Some triplets of nodes, ( w i , w j , w k ) {\displaystyle ({\bf {w}}_{i},{\bf {w}}_{j},{\bf {w}}_{k})} , form bending ribs. Call this set of triplets G {\displaystyle G} . The stretching energy is U E = 1 2 λ ∑ ( w i , w j ) ∈ E ‖ w i − w j ‖ 2 {\displaystyle U_{E}={\frac {1}{2}}\lambda \sum _{({\bf {w}}_{i},{\bf {w}}_{j})\in E}\|{\bf {w}}_{i}-{\bf {w}}_{j}\|^{2}} , The bending energy is U G = 1 2 μ ∑ ( w i , w j , w k ) ∈ G ‖ w i − 2 w j + w k ‖ 2 {\displaystyle U_{G}={\frac {1}{2}}\mu \sum _{({\bf {w}}_{i},{\bf {w}}_{j},{\bf {w}}_{k})\in G}\|{\bf {w}}_{i}-2{\bf {w}}_{j}+{\bf {w}}_{k}\|^{2}} , where λ {\displaystyle \lambda } and μ {\displaystyle \mu } are the stretching and bending moduli respectively. The stretching energy is sometimes referred to as the membrane, while the bending energy is referred to as the thin plate term. For example, on the 2D rectangular grid the elastic edges are just vertical and horizontal edges (pairs of closest vertices) and the bending ribs are the vertical or horizontal triplets of consecutive (closest) vertices. The total energy of the elastic map is thus U = D + U E + U G . {\displaystyle U=D+U_{E}+U_{G}.} The position of the nodes { w j } {\displaystyle \{{\bf {w}}_{j}\}} is determined by the mechanical equilibrium of the elastic map, i.e. its location is such that it minimizes the total energy U {\displaystyle U} . == Expectation-maximization algorithm == For a given splitting of dataset S {\displaystyle {\mathcal {S}}} in classes K j {\displaystyle K_{j}} , minimization of the quadratic functional U {\displaystyle U} is a linear problem with the sparse matrix of coefficients. Therefore, similar to principal component analysis or k-means, a splitting method is used: For given { w j } {\displaystyle \{{\bf {w}}_{j}\}} find { K j } {\displaystyle \{K_{j}\}} ; For given { K j } {\displaystyle \{K_{j}\}} minimize U {\displaystyle U} and find { w j } {\displaystyle \{{\bf {w}}_{j}\}} ; If no change, terminate. This expectation-maximization algorithm guarantees a local minimum of U {\displaystyle U} . For improving the approximation various additional methods are proposed. For example, the softening strategy is used. This strategy starts with a rigid grids (small length, small bending and large elasticity modules λ {\displaystyle \lambda } and μ {\displaystyle \mu } coefficients) and finishes with soft grids (small λ {\displaystyle \lambda } and μ {\displaystyle \mu } ). The training goes in several epochs, each epoch with its own grid rigidness. Another adaptive strategy is growing net: one starts from a small number of nodes and gradually adds new nodes. Each epoch goes with its own number of nodes. == Applications == Most important applications of the method and free software are in bioinformatics for exploratory data analysis and visualisation of multidimensional data, for data visualisation in economics, social and political sciences, as an auxiliary tool for data mapping in geographic informational systems and for visualisation of data of various nature. The method is applied in quantitative biology for reconstructing the curved surface of a tree leaf from a stack of light microscopy images. This reconstruction is used for quantifying the geodesic distances between trichomes and their patterning, which is a marker of the capability of a plant to resist to pathogenes. Recently, the method is adapted as a support tool in the decision process underlying the selection, optimization, and management of financial portfolios. The method of elastic maps has been systematically tested and compared with several machine learning methods on the applied problem of identification of the flow regime of a gas-liquid flow in a pipe. There are various regimes: Single phase water or air flow, Bubbly flow, Bubbly-slug flow, Slug flow, Slug-churn flow, Churn flow, Churn-annular flow, and Annular flow. The simplest and most common method used to identify the flow regime is visual observation. This approach is, however, subjective and unsuitable for relatively high gas and liquid flow rates. Therefore, the machine learning methods are proposed by many authors. The methods are applied to differential pressure data collected during a calibration process. The method of elastic maps provided a 2D map, where the area of each regime is represented. The comparison with some other machine learning methods is presented in Table 1 for various pipe diameters and pressure. Here, ANN stands for the backpropagation artificial neural networks, SVM stands for the support vector machine, SOM for the self-organizing maps. The hybrid technology was developed for engineering applications. In this technology, elastic maps are used in combination with Principal Component Analysis (PCA), Independent Component Analysis (ICA) and backpropagation ANN. The textbook provides a systematic comparison of elastic maps and self-organizing maps (SOMs) in applications to economic and financial decision-making.
Read more →
XGBoost

XGBoost (eXtreme Gradient Boosting) is an open-source software library which provides a regularizing gradient boosting framework for C++, Java, Python, R, Julia, Perl, and Scala. It works on Linux, Microsoft Windows, and macOS. From the project description, it aims to provide a "Scalable, Portable and Distributed Gradient Boosting (GBM, GBRT, GBDT) Library". It runs on a single machine, as well as the distributed processing frameworks Apache Hadoop, Apache Spark, Apache Flink, and Dask. XGBoost gained much popularity and attention in the mid-2010s as the algorithm of choice for many winning teams of machine learning competitions. == History == XGBoost initially started as a research project by Tianqi Chen as part of the Distributed (Deep) Machine Learning Community (DMLC) group at the University of Washington. Initially, it began as a terminal application which could be configured using a libsvm configuration file. It became well known in the ML competition circles after its use in the winning solution of the Higgs Machine Learning Challenge. Soon after, the Python and R packages were built, and XGBoost now has package implementations for Java, Scala, Julia, Perl, and other languages. This brought the library to more developers and contributed to its popularity among the Kaggle community, where it has been used for a large number of competitions. It was soon integrated with a number of other packages making it easier to use in their respective communities. It has now been integrated with scikit-learn for Python users and with the caret package for R users. It can also be integrated into Data Flow frameworks like Apache Spark, Apache Hadoop, and Apache Flink using the abstracted Rabit and XGBoost4J. XGBoost is also available on OpenCL for FPGAs. An efficient, scalable implementation of XGBoost has been published by Tianqi Chen and Carlos Guestrin. While the XGBoost model often achieves higher accuracy than a single decision tree, it sacrifices the intrinsic interpretability of decision trees. For example, following the path that a decision tree takes to make its decision is trivial and self-explained, but following the paths of hundreds or thousands of trees is much harder. == Features == Salient features of XGBoost which make it different from other gradient boosting algorithms include: Clever penalization of trees A proportional shrinking of leaf nodes Newton Boosting Extra randomization parameter Implementation on single, distributed systems and out-of-core computation Automatic feature selection Theoretically justified weighted quantile sketching for efficient computation Parallel tree structure boosting with sparsity Efficient cacheable block structure for decision tree training == The algorithm == XGBoost works as Newton–Raphson in function space unlike gradient boosting that works as gradient descent in function space, a second order Taylor approximation is used in the loss function to make the connection to Newton–Raphson method. A generic unregularized XGBoost algorithm is: == Parameters == XGBoost has parameters which can be specified to affect how it functions and performs. Some parameters include: Learning rate (also known as the "step size" or “"shrinkage"), it is a number between 0 and 1 (default is 0.3), which determines the rate the algorithm learns from each iteration. n_estimators, sets the number of trees to be built in the ensemble, where more trees generally increases the complexity of the model, but can lead to overfitting with too many trees. Gamma (also known as Lagrange multiplier or the minimum loss reduction parameter), controls the minimum amount of loss reduction required to make a further split on a leaf node of the tree. The default in XGBoost is 0 . max_depth, represents how deeply each tree in the boosting process can grow during training, where the default is 6. == Awards == John Chambers Award (2016) High Energy Physics meets Machine Learning award (HEP meets ML) (2016)
Read more →