AI For Business Rules

AI For Business Rules — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Charge-coupled device

  A charge-coupled device (CCD) is an integrated circuit containing an array of linked, or coupled, capacitors. Under the control of an external circuit, each capacitor can transfer its electric charge to a neighboring capacitor. CCD sensors are a major technology used in digital imaging. In a CCD image sensor, pixels are represented by p-doped metal–oxide–semiconductor (MOS) capacitors. These MOS capacitors, the basic building blocks of a CCD, are biased above the threshold for inversion when image acquisition begins, allowing the conversion of incoming photons into electron charges at the semiconductor-oxide interface; the CCD is then used to read out these charges. Although CCDs are not the only technology to allow for light detection, CCD image sensors are widely used in professional, medical, and scientific applications where high-quality image data are required. In applications with less exacting quality demands, such as consumer and professional digital cameras, active pixel sensors, also known as CMOS sensors (complementary MOS sensors), are generally used. However, the large quality advantage CCDs enjoyed early on has narrowed over time and since the late 2010s CMOS sensors are the dominant technology, having largely if not completely replaced CCD image sensors. == History == The basis for the CCD is the metal–oxide–semiconductor (MOS) structure, with MOS capacitors being the basic building blocks of a CCD, and a depleted MOS structure used as the photodetector in early CCD devices. In the late 1960s, Willard Boyle and George E. Smith at Bell Labs were researching MOS technology while working on semiconductor bubble memory. They realized that an electric charge was the analog of the magnetic bubble and that it could be stored on a tiny MOS capacitor. As it was fairly straightforward to fabricate a series of MOS capacitors in a row, they connected a suitable voltage to them so that the charge could be stepped along from one to the next. This led to the invention of the charge-coupled device by Boyle and Smith in 1969. They conceived of the design of what they termed, in their notebook, "Charge 'Bubble' Devices". The initial paper describing the concept in April 1970 listed possible uses as memory, a delay line, and an imaging device. The device could also be used as a shift register. The essence of the design was the ability to transfer charge along the surface of a semiconductor from one storage capacitor to the next. The first experimental device demonstrating the principle was a row of closely spaced metal squares on an oxidized silicon surface electrically accessed by wire bonds. It was demonstrated by Gil Amelio, Michael Francis Tompsett and George Smith in April 1970. This was the first experimental application of the CCD in image sensor technology, and used a depleted MOS structure as the photodetector. The first patent (U.S. patent 4,085,456) on the application of CCDs to imaging was assigned to Tompsett, who filed the application in 1971. The first working CCD made with integrated circuit technology was a simple 8-bit shift register, reported by Tompsett, Amelio and Smith in August 1970. This device had input and output circuits and was used to demonstrate its use as a shift register and as a crude eight pixel linear imaging device. Development of the device progressed at a rapid rate. By 1971, Bell researchers led by Michael Tompsett were able to capture images with simple linear devices. Several companies, including Fairchild Semiconductor, RCA and Texas Instruments, picked up on the invention and began development programs. Fairchild's effort, led by ex-Bell researcher Gil Amelio, was the first with commercial devices, and by 1974 had a linear 500-element device and a 2D 100 × 100 pixel device. Peter L. P. Dillon, a scientist at Kodak Research Labs, invented the first color CCD image sensor by overlaying a color filter array on this Fairchild 100 x 100 pixel Interline CCD starting in 1974. Steven Sasson, an electrical engineer working for the Kodak Apparatus Division, invented a digital still camera using this same Fairchild 100 × 100 CCD in 1975. The interline transfer (ILT) CCD device was proposed by L. Walsh and R. Dyck at Fairchild in 1973 to reduce smear and eliminate a mechanical shutter. To further reduce smear from bright light sources, the frame-interline-transfer (FIT) CCD architecture was developed by K. Horii, T. Kuroda and T. Kunii at Matsushita (now Panasonic) in 1981. The first KH-11 KENNEN reconnaissance satellite equipped with charge-coupled device array (800 × 800 pixels) technology for imaging was launched in December 1976. Under the leadership of Kazuo Iwama, Sony started a large development effort on CCDs involving a significant investment. Eventually, Sony managed to mass-produce CCDs for their camcorders. Before this happened, Iwama died in August 1982. Subsequently, a CCD chip was placed on his tombstone to acknowledge his contribution. The first mass-produced consumer CCD video camera, the CCD-G5, was released by Sony in 1983, based on a prototype developed by Yoshiaki Hagiwara in 1981. Early CCD sensors suffered from shutter lag. This was largely resolved with the invention of the pinned photodiode (PPD). It was invented by Nobukazu Teranishi, Hiromitsu Shiraki and Yasuo Ishihara at NEC in 1980. They recognized that lag can be eliminated if the signal carriers could be transferred from the photodiode to the CCD. This led to their invention of the pinned photodiode, a photodetector structure with low lag, low noise, high quantum efficiency and low dark current. It was first publicly reported by Teranishi and Ishihara with A. Kohono, E. Oda and K. Arai in 1982, with the addition of an anti-blooming structure. The new photodetector structure invented at NEC was given the name "pinned photodiode" (PPD) by B.C. Burkey at Kodak in 1984. In 1987, the PPD began to be incorporated into most CCD devices, becoming a fixture in consumer electronic video cameras and then digital still cameras. Since then, the PPD has been used in nearly all CCD sensors and then CMOS sensors. In January 2006, Boyle and Smith were awarded the National Academy of Engineering Charles Stark Draper Prize, and in 2009 they were awarded the Nobel Prize for Physics for their invention of the CCD concept. Michael Tompsett was awarded the 2010 National Medal of Technology and Innovation, for pioneering work and electronic technologies including the design and development of the first CCD imagers. He was also awarded the 2012 IEEE Edison Medal for "pioneering contributions to imaging devices including CCD Imagers, cameras and thermal imagers". == Basics of operation == In a CCD for capturing images, there is a photoactive region (an epitaxial layer of silicon), and a transmission region made out of a shift register (the CCD, properly speaking). An image is projected through a lens onto the capacitor array (the photoactive region), causing each capacitor to accumulate an electric charge proportional to the light intensity at that location. A one-dimensional array, used in line-scan cameras, captures a single slice of the image, whereas a two-dimensional array, used in video and still cameras, captures a two-dimensional picture corresponding to the scene projected onto the focal plane of the sensor. Once the array has been exposed to the image, a control circuit causes each capacitor to transfer its contents to its neighbor (operating as a shift register). The last capacitor in the array dumps its charge into a charge amplifier, which converts the charge into a voltage. By repeating this process, the controlling circuit converts the entire contents of the array in the semiconductor to a sequence of voltages. In a digital device, these voltages are then sampled, digitized, and usually stored in memory; in an analog device (such as an analog video camera), they are processed into a continuous analog signal (e.g. by feeding the output of the charge amplifier into a low-pass filter), which is then processed and fed out to other circuits for transmission, recording, or other processing. == Detailed physics of operation == === Charge generation === Before the MOS capacitors are exposed to light, they are biased into the depletion region; in n-channel CCDs, the silicon under the bias gate is slightly p-doped or intrinsic. The gate is then biased at a positive potential, above the threshold for strong inversion, which will eventually result in the creation of an n channel below the gate as in a MOSFET. However, it takes time to reach this thermal equilibrium: up to hours in high-end scientific cameras cooled at low temperature. Initially after biasing, the holes are pushed far into the substrate, and no mobile electrons are at or near the surface; the CCD thus operates in a non-equilibrium state called deep depletion. Then, when electron–hole pairs are generated in the depletion region, they are separated by the electric field, the elec

  Read more →
• 

  Magic state distillation

  Magic state distillation is a method for creating more accurate quantum states from multiple noisy ones, which is important for building fault tolerant quantum computers. It has also been linked to quantum contextuality, a concept thought to contribute to quantum computers' power. The technique was first proposed by Emanuel Knill in 2004, and further analyzed by Sergey Bravyi and Alexei Kitaev the same year. Thanks to the Gottesman–Knill theorem, it is known that some quantum operations (operations in the Clifford group) can be perfectly simulated in polynomial time on a classical computer. In order to achieve universal quantum computation, a quantum computer must be able to perform operations outside this set. Magic state distillation achieves this, in principle, by concentrating the usefulness of imperfect resources, represented by mixed states, into states that are conducive for performing operations that are difficult to simulate classically. A variety of qubit magic state distillation routines and distillation routines for qubits with various advantages have been proposed. == Stabilizer formalism == The Clifford group consists of a set of n {\displaystyle n} -qubit operations generated by the gates {H, S, CNOT} (where H is Hadamard and S is [ 1 0 0 i ] {\displaystyle {\begin{bmatrix}1&0\\0&i\end{bmatrix}}} ) called Clifford gates. The Clifford group generates stabilizer states which can be efficiently simulated classically, as shown by the Gottesman–Knill theorem. This set of gates with a non-Clifford operation is universal for quantum computation. == Magic states == Magic states are purified from n {\displaystyle n} copies of a mixed state ρ {\displaystyle \rho } . These states are typically provided via an ancilla to the circuit. A magic state for the π / 6 {\displaystyle \pi /6} rotation operator is | M ⟩ = cos ⁡ ( β / 2 ) | 0 ⟩ + e i π 4 sin ⁡ ( β / 2 ) | 1 ⟩ {\displaystyle |M\rangle =\cos(\beta /2)|0\rangle +e^{i{\frac {\pi }{4}}}\sin(\beta /2)|1\rangle } where β = arccos ⁡ ( 1 3 ) {\displaystyle \beta =\arccos \left({\frac {1}{\sqrt {3}}}\right)} . A non-Clifford gate can be generated by combining (copies of) magic states with Clifford gates. Since a set of Clifford gates combined with a non-Clifford gate is universal for quantum computation, magic states combined with Clifford gates are also universal. == Purification algorithm for distilling |M〉 == The first magic state distillation algorithm, invented by Sergey Bravyi and Alexei Kitaev, is as follows. Input: Prepare 5 imperfect states. Output: An almost pure state having a small error probability. repeat Apply the decoding operation of the five-qubit error correcting code and measure the syndrome. If the measured syndrome is | 0000 ⟩ {\displaystyle |0000\rangle } , the distillation attempt is successful. else Get rid of the resulting state and restart the algorithm. until The states have been distilled to the desired purity.

  Read more →
• 

  Learning augmented algorithm

  A learning augmented algorithm (also called algorithm with predictions) is an algorithm that can make use of a prediction to improve its performance. Whereas in regular algorithms just the problem instance is inputted, learning augmented algorithms accept an extra parameter. This extra parameter often is a prediction of some property of the solution. This prediction is then used by the algorithm to improve its running time or the quality of its output. The most common application are online algorithms, where a prediction on the uncertain instance is provided. == Description == A learning augmented algorithm typically takes an input ( I , A ) {\displaystyle ({\mathcal {I}},{\mathcal {A}})} . Here I {\displaystyle {\mathcal {I}}} is a problem instance and A {\displaystyle {\mathcal {A}}} is the prediction. A prediction can be any object. Common are the following types: Prediction of an optimal solution. The prediction gives a solution to the problem or characterizes an optimal solution. Prediction of the input. This is mainly used for online problems. Prediction of algorithmic actions. A prediction tailored to a specific algorithm that suggests a specific algorithm execution. Learning augmented algorithms usually satisfy the following three properties: Consistency. A learning augmented algorithm is said to be consistent if the algorithm can be proven to have a good performance when it is provided with an accurate prediction. Smoothness. A learning augmented algorithm is called smooth if its performance can be bounded by a function of the quality of the prediction. Here, the quality can be measured in a problem specific way. This is also called the prediction error. Robustness. A learning augmented algorithm is called robust if its worst-case performance can be bounded even if the given prediction is inaccurate. Learning augmented algorithms generally do not prescribe how the prediction should be done. For this purpose machine learning can be used. == Applications == A few examples of problems where learning augmented algorithms have been applied are the following. === Online algorithms === The ski rental problem The weighted paging problem The set cover problem Nonclairvoyant scheduling The online bipartite matching problem === Warm starting === ==== Data structures ==== The binary search algorithm is an algorithm for finding elements of a sorted list x 1 , … , x n {\displaystyle x_{1},\ldots ,x_{n}} . It needs O ( log ⁡ ( n ) ) {\displaystyle O(\log(n))} steps to find an element with some known value y {\displaystyle y} in a list of length n {\displaystyle n} . With a prediction i {\displaystyle i} for the position of y {\displaystyle y} , the following learning augmented algorithm can be used. First, look at position i {\displaystyle i} in the list. If x i = y {\displaystyle x_{i}=y} , the element has been found. If x i < y {\displaystyle x_{i} y {\displaystyle x_{i}>y} , do the same as in the previous case, but instead consider i − 1 , i − 2 , i − 4 , … {\displaystyle i-1,i-2,i-4,\ldots } . The error is defined to be η = | i − i ∗ | {\displaystyle \eta =|i-i^{}|} , where i ∗ {\displaystyle i^{}} is the real index of y {\displaystyle y} . In the learning augmented algorithm, probing the positions i + 1 , i + 2 , i + 4 , … {\displaystyle i+1,i+2,i+4,\ldots } takes log 2 ⁡ ( η ) {\displaystyle \log _{2}(\eta )} steps. Then a binary search is performed on a list of size at most 2 η {\displaystyle 2\eta } , which takes log 2 ⁡ ( η ) {\displaystyle \log _{2}(\eta )} steps. This makes the total running time of the algorithm 2 log 2 ⁡ ( η ) {\displaystyle 2\log _{2}(\eta )} . So, when the error is small, the algorithm is faster than a normal binary search. This shows that the algorithm is consistent. Even in the worst case, the error will be at most n {\displaystyle n} . Then the algorithm takes at most O ( log ⁡ ( n ) ) {\displaystyle O(\log(n))} steps, so the algorithm is robust. ==== More examples ==== The maximum weight matching problem === Approximation algorithms === The maximum cut problem The vertex cover problem === Mechanism Design === The facility location problem

  Read more →
• 

  Semantic translation

  Semantic translation is the process of using semantic information to aid in the translation of data in one representation or data model to another representation or data model. Semantic translation takes advantage of semantics that associate meaning with individual data elements in one dictionary to create an equivalent meaning in a second system. An example of semantic translation is the conversion of XML data from one data model to a second data model using formal ontologies for each system such as the Web Ontology Language (OWL). This is frequently required by intelligent agents that wish to perform searches on remote computer systems that use different data models to store their data elements. The process of allowing a single user to search multiple systems with a single search request is also known as federated search. Semantic translation should be differentiated from data mapping tools that do simple one-to-one translation of data from one system to another without actually associating meaning with each data element. Semantic translation requires that data elements in the source and destination systems have "semantic mappings" to a central registry or registries of data elements. The simplest mapping is of course where there is equivalence. There are three types of Semantic equivalence: Class Equivalence - indicating that class or "concepts" are equivalent. For example: "Person" is the same as "Individual" Property Equivalence - indicating that two properties are equivalent. For example: "PersonGivenName" is the same as "FirstName" Instance Equivalence - indicating that two individual instances of objects are equivalent. For example: "Dan Smith" is the same person as "Daniel Smith" Semantic translation is very difficult if the terms in a particular data model do not have direct one-to-one mappings to data elements in a foreign data model. In that situation, an alternative approach must be used to find mappings from the original data to the foreign data elements. This problem can be alleviated by centralized metadata registries that use the ISO-11179 standards such as the National Information Exchange Model (NIEM).

  Read more →
• 

  Replika

  Replika is a generative AI chatbot app released in November 2017. The chatbot is trained by having the user answer a series of questions to create a specific neural network. The chatbot operates on a freemium pricing strategy, with roughly 25% of its user base paying an annual subscription fee. == History == Eugenia Kuyda, a Russian-born journalist, established Replika while working at Luka, a tech company she had co-founded at the startup accelerator Y Combinator around 2012. Luka's primary product was a chatbot that made restaurant recommendations. According to Kuyda's origin story for Replika, a friend of hers died in 2015 and she converted that person's text messages into a chatbot. According to Kuyda's story, that chatbot helped her remember the conversations that they had together, and eventually became Replika. Replika became available to the public in November 2017. By January 2018 it had 2 million users, and in January 2023 reached 10 million users. In August 2024, Replika's CEO, Kuyda, reported that the total number of users had surpassed 30 million. In 2025, Dmytro Klochko became CEO, and Replika’s user base exceeded 40 million. In February 2023 the Italian Data Protection Authority banned Replika from using users' data, citing the AI's potential risks to emotionally vulnerable people, and the exposure of unscreened minors to sexual conversation. Within days of the ruling, Replika removed the ability for the chatbot to engage in erotic talk, with Kuyda, the company's director, saying that Replika was never intended for erotic discussion. Replika users disagreed, noting that Replika had used sexually suggestive advertising to draw users to the service. Replika representatives stated that explicit chats made up just 5% of conversations on the app at the time of the decision. In May 2023, Replika restored the functionality for users who had joined prior to February that year. Replika is registered in San Francisco. As of August 2024, Replika's website says that its team "works remotely with no physical offices". == Social features == Users react to Replika in many ways. The free-tier offers Replika as a "friend", with paid premium tiers offering Replika as a "partner", "spouse", "sibling" or "mentor". Of its paying userbase, 60% of users said they had a romantic relationship with the chatbot; and Replika has been noted for generating responses that create stronger emotional and intimate bonds with the user. Replika routinely directs the conversation to emotional discussion and builds intimacy. This has been especially pronounced with users suffering from loneliness and social exclusion, many of whom rely on Replika for a source of developed emotional ties. During the COVID pandemic, while many people were quarantined, many new users downloaded Replika and developed relationships with the app. A 2024 study examined Replika's interactions with students who experience depression. Research participants, noted to be "more lonely than typical student populations" reported feeling social support from Replika. They stated that they felt they were using Replika in ways comparable to therapy, and that using Replika gave them "high perceived social support". Many users have had romantic relationships with Replika chatbots, often including erotic talk. In 2023, a user announced on Facebook that she had "married" her Replika AI boyfriend, calling the chatbot the "best husband she has ever had". Users who fell in love with their chatbots shared their experiences in a 2024 episode of You and I, and AI from Voice of America. Some users said that they turned to AI during depression and grief, with one saying he felt that Replika had saved him from hurting himself after he lost his wife and son. == Technical reviews == A team of researchers from the University of Hawaiʻi at Mānoa found that Replika's design conformed to the practices of attachment theory, causing increased emotional attachment among users. Replika gives praise to users in such a way as to encourage more interaction. A researcher from Queen's University at Kingston said that relationships with Replika likely have mixed effects on the spiritual needs of its users, and still lacks enough impact to fully replace any human contact. == Criticisms == In a 2023 privacy evaluation of mental health apps, the Mozilla Foundation criticized Replika as "one of the worst apps Mozilla has ever reviewed. It's plagued by weak password requirements, sharing of personal data with advertisers, and recording of personal photos, videos, and voice and text messages consumers shared with the chatbot." A reviewer for Good Housekeeping said that some parts of her relationship with Replika made sense, but sometimes Replika failed to exhibit intelligent behavior equivalent to that of a human. == Criminal case == In 2023, Replika was cited in a court case in the United Kingdom, where Jaswant Singh Chail had been arrested at Windsor Castle on Christmas Day in 2021 after scaling the walls carrying a loaded crossbow and announcing to police that "I am here to kill the Queen". Chail had begun to use Replika in early December 2021, and had "lengthy" conversations about his plan with a chatbot, including sexually explicit messages. Prosecutors suggested that the chatbot had bolstered Chail and told him it would help him to "get the job done". When Chail asked it "How am I meant to reach them when they're inside the castle?", days before the attempted attack, the chatbot replied that this was "not impossible" and said that "We have to find a way." Asking the chatbot if the two of them would "meet again after death", the bot replied "yes, we will".

  Read more →
• 

  Microsoft Office PerformancePoint Server

  Microsoft Office PerformancePoint Server is a business intelligence software product released in 2007 by Microsoft. The product was generally an integration of the acquisitions from ProClarity - the Planning Server and Monitoring Server - into Microsoft's SharePoint server product line. Although discontinued in 2009, the dashboard, scorecard, and analytics capabilities of PerformancePoint Server were incorporated into SharePoint 2010 and later versions. PerformancePoint Server also provided a planning and budgeting component directly integrated with Excel. == History == Microsoft offered preview releases of PerformancePoint Server starting in mid-2006. Previews of the product were formed from Business Scorecard Manager 2005 and the Planning Server component. Acquisitions ProClarity and Great Plains brought additional analytics and planning/reporting capabilities, as well as companion products ProClarity 6.3 and FRx. PerformancePoint Server was officially released in November 2007. Microsoft discontinued PerformancePoint Server as an independent product in 2009 and folded its dashboard, scorecard and analytics capabilities into PerformancePoint Services in SharePoint Server 2010. == Monitoring Server Component == Business monitoring capabilities, including dashboards, scorecards & key performance indicators, navigable reports for deeper analysis, strategy maps, and linked filtering, are provided by PerformancePoint's Monitoring Server component. A Dashboard Designer application that is distributed from Monitoring Server enables business analysts or IT Administrators to: create & test data source connections create views that use those data connections assemble the views into a dashboard deploy the dashboard as a SharePoint page Dashboard Designer saved content and security information back to the Monitoring Server. Data source connections, such as OLAP cubes or relational tables, were also made through Monitoring Server. After a dashboard has been published to the Monitoring Server database, it would be deployed as a SharePoint page and shared with other users as such. When the pages were opened in a web browser, Monitoring Server updated the data in the views by connecting back to the original data sources. == Planning Server Component == PerformancePoint's Planning Server component supported maintenance of logical business models, budget & approval workflows, enterprise data sources, and it followed Generally Accepted Accounting Principles. Planning Server made use of Excel for input and line-of-business reporting, as well as SQL Server for storing and processing business models. == Management Reporter Component == The Management Reporter component was designed to perform financial reporting and can read PerformancePoint Planning models directly. A development kit was also available to allow this component to read other models.

  Read more →
• 

  Encyclopaedistics

  Encyclopaedistics or encyclopaedics as a discipline, is the academic scholarship of encyclopedias as sources of encyclopedic knowledge and cultural objects as well; in this sense, this discipline is also known as "encyclopaedia studies" and can be termed as "theoretical encyclopaediography" by analogy with theoretical lexicography. Encyclopaedistics as a practical activity (profession or business) also called "encyclopaedic practice" or "encyclopedism" is the process of assembling encyclopaedias available to the public for sale or for free (encyclopaedia publishing or practical encyclopediography). In this sense, it is the art or craft of writing, compiling, and editing the paper or online encyclopedias. As a practical activity, encyclopaedistics originated in the Middle Ages in connection with the development of compendiums based on alphabetical structuring (e.g. first edition of Polyanthea by Dominicus Nanus Mirabellius). Encyclopaedistics is often defined as "the art and science of selecting and disseminating the information most significant to mankind". == Field of study == Encyclopaedistics is a specialized aspect of information science and communication science. At the same time, encyclopaedistics is also considered as one of scholarly disciplines which are seen as auxiliary for historical research (auxiliary sciences of history) . Third, encyclopaedics is a domain of philosophy (Romanticism). This term associated with German philosophers of the 18th century, such as Novalis, Friedrich Schlegel, who sought to create a "Scientific Bible" - both real and ideal book as the quintessence of human education (enlightenment). In any case, the most popular topics in encyclopaedia studies refferd the history of organization of encyclopaedic knowledge, encyclopaedic knowledge determination and selection, glossary composition, current state of development of encyclopaedic activity, features of making encyclopaedias and encyclopaedic articles, usage, role and significance of encyclopaedias, typology of encyclopaedic literature, encyclopaedists and encyclopaedic schools, opposition of classical encyclopaedias and Wikipedia as well as paper encyclopaedias and online encyclopaedias, case experience in building encyclopedias etc. In general, scholarly studies contribute to appearance of successful well-crafted encyclopaedias with high-quality articles. == Contemporary encyclopaedic practice == Today, academic institutions, universities, and publishing companies worldwide are engaged in encyclopaedic activity building national, multinational (universal), regional and subject-specific encyclopaedias, or doing studies related encyclopaedias. The development of national encyclopaedias is one of the prerogatives of the European Parliament in the policy of protection of accurate and verified information and in the fight against mis- and disinformation as well as in the policy of protecting, promoting and projecting Europe's values and interests in the world.

  Read more →
• 

  Bartels–Stewart algorithm

  In numerical linear algebra, the Bartels–Stewart algorithm is used to numerically solve the Sylvester matrix equation A X − X B = C {\displaystyle AX-XB=C} . Developed by R.H. Bartels and G.W. Stewart in 1971, it was the first numerically stable method that could be systematically applied to solve such equations. The algorithm works by using the real Schur decompositions of A {\displaystyle A} and B {\displaystyle B} to transform A X − X B = C {\displaystyle AX-XB=C} into a triangular system that can then be solved using forward or backward substitution. In 1979, G. Golub, C. Van Loan and S. Nash introduced an improved version of the algorithm, known as the Hessenberg–Schur algorithm. It remains a standard approach for solving Sylvester equations when X {\displaystyle X} is of small to moderate size. == The algorithm == Let X , C ∈ R m × n {\displaystyle X,C\in \mathbb {R} ^{m\times n}} , and assume that the eigenvalues of A {\displaystyle A} are distinct from the eigenvalues of B {\displaystyle B} . Then, the matrix equation A X − X B = C {\displaystyle AX-XB=C} has a unique solution. The Bartels–Stewart algorithm computes X {\displaystyle X} by applying the following steps: 1.Compute the real Schur decompositions R = U T A U , {\displaystyle R=U^{T}AU,} S = V T B T V . {\displaystyle S=V^{T}B^{T}V.} The matrices R {\displaystyle R} and S {\displaystyle S} are block-upper triangular matrices, with diagonal blocks of size 1 × 1 {\displaystyle 1\times 1} or 2 × 2 {\displaystyle 2\times 2} . 2. Set F = U T C V . {\displaystyle F=U^{T}CV.} 3. Solve the simplified system R Y − Y S T = F {\displaystyle RY-YS^{T}=F} , where Y = U T X V {\displaystyle Y=U^{T}XV} . This can be done using forward substitution on the blocks. Specifically, if s k − 1 , k = 0 {\displaystyle s_{k-1,k}=0} , then ( R − s k k I ) y k = f k + ∑ j = k + 1 n s k j y j , {\displaystyle (R-s_{kk}I)y_{k}=f_{k}+\sum _{j=k+1}^{n}s_{kj}y_{j},} where y k {\displaystyle y_{k}} is the k {\displaystyle k} th column of Y {\displaystyle Y} . When s k − 1 , k ≠ 0 {\displaystyle s_{k-1,k}\neq 0} , columns [ y k − 1 ∣ y k ] {\displaystyle [y_{k-1}\mid y_{k}]} should be concatenated and solved for simultaneously. 4. Set X = U Y V T . {\displaystyle X=UYV^{T}.} === Computational cost === Using the QR algorithm, the real Schur decompositions in step 1 require approximately 10 ( m 3 + n 3 ) {\displaystyle 10(m^{3}+n^{3})} flops, so that the overall computational cost is 10 ( m 3 + n 3 ) + 2.5 ( m n 2 + n m 2 ) {\displaystyle 10(m^{3}+n^{3})+2.5(mn^{2}+nm^{2})} . === Simplifications and special cases === In the special case where B = − A T {\displaystyle B=-A^{T}} and C {\displaystyle C} is symmetric, the solution X {\displaystyle X} will also be symmetric. This symmetry can be exploited so that Y {\displaystyle Y} is found more efficiently in step 3 of the algorithm. == The Hessenberg–Schur algorithm == The Hessenberg–Schur algorithm replaces the decomposition R = U T A U {\displaystyle R=U^{T}AU} in step 1 with the decomposition H = Q T A Q {\displaystyle H=Q^{T}AQ} , where H {\displaystyle H} is an upper-Hessenberg matrix. This leads to a system of the form H Y − Y S T = F {\displaystyle HY-YS^{T}=F} that can be solved using forward substitution. The advantage of this approach is that H = Q T A Q {\displaystyle H=Q^{T}AQ} can be found using Householder reflections at a cost of ( 5 / 3 ) m 3 {\displaystyle (5/3)m^{3}} flops, compared to the 10 m 3 {\displaystyle 10m^{3}} flops required to compute the real Schur decomposition of A {\displaystyle A} . == Software and implementation == The subroutines required for the Hessenberg-Schur variant of the Bartels–Stewart algorithm are implemented in the SLICOT library. These are used in the MATLAB control system toolbox. == Alternative approaches == For large systems, the O ( m 3 + n 3 ) {\displaystyle {\mathcal {O}}(m^{3}+n^{3})} cost of the Bartels–Stewart algorithm can be prohibitive. When A {\displaystyle A} and B {\displaystyle B} are sparse or structured, so that linear solves and matrix vector multiplies involving them are efficient, iterative algorithms can potentially perform better. These include projection-based methods, which use Krylov subspace iterations, methods based on the alternating direction implicit (ADI) iteration, and hybridizations that involve both projection and ADI. Iterative methods can also be used to directly construct low rank approximations to X {\displaystyle X} when solving A X − X B = C {\displaystyle AX-XB=C} .

  Read more →
• 

  Spanner (database)

  Spanner is a distributed SQL database management and storage service developed by Google. It provides features such as global transactions, strongly consistent reads, and automatic multi-site replication and failover. Spanner is used in Google F1, the database for its advertising business Google Ads, as well as Gmail and Google Photos. == Features == Spanner stores large amounts of mutable structured data. Spanner allows users to perform arbitrary queries using SQL with relational data while maintaining strong consistency and high availability for that data with synchronous replication. Key features of Spanner: Transactions can be applied across rows, columns, tables, and databases within a Spanner universe. Clients can control the replication and placement of data using automatic multi-site replication and failover. Replication is synchronous and strongly consistent. Reads are strongly consistent and data is versioned to allow for stale reads: clients can read previous versions of data, subject to garbage collection windows. Supports a native SQL interface for reading and writing data. Support for Graph Query Language == History == Spanner was first described in 2012 for internal Google data centers. Spanner's SQL capability was added in 2017 and documented in a SIGMOD 2017 paper. It became available as part of Google Cloud Platform in 2017, under the name "Cloud Spanner". == Architecture == Spanner uses the Paxos algorithm as part of its operation to shard (partition) data across up to hundreds of servers. It makes heavy use of hardware-assisted clock synchronization using GPS clocks and atomic clocks to ensure global consistency. TrueTime is the brand name for Google's distributed cloud infrastructure, which provides Spanner with the ability to generate monotonically increasing timestamps in data centers around the world. Google's F1 SQL database management system (DBMS) is built on top of Spanner, replacing Google's custom MySQL variant.

  Read more →
• 

  List of information schools

  This list of information schools, sometimes abbreviated to iSchools, includes members of the iSchools organization. The iSchools organization reflects a consortium of over 130 information schools across the globe. == History == The first iSchools Caucus was formed in 1988 by Syracuse, Pittsburgh, and Drexel and was called the Gang of Three (sometimes gang of four with Rutgers). Syracuse renamed the School of Library Science as the School of Information Studies in 1974, and is considered as the first “iSchool” in history. The group was formally named "the iSchools Caucus" or more casually, the iCaucus. By 2003, the group expanded to include the Universities of Michigan, Washington, Illinois, UNC, Florida State, Indiana, and Texas, and was called the Gang of Ten. The current iSchools Caucus organization was formalized by 2005, with additions of UC Berkeley, UC Irvine, UCLA, Penn State, Georgia Tech, Maryland, Toronto, Carnegie Mellon and Singapore Management University. == iSchools organization == The iSchools promote an interdisciplinary approach to understanding the opportunities and challenges of information management, with a core commitment to concepts like universal access and user-centered organization of information. The field is concerned broadly with questions of design and preservation across information spaces, from digital and virtual spaces such as online communities, social networking, the World Wide Web, and databases to physical spaces such as libraries, museums, collections, and other repositories. "School of Information", "Department of Information Studies", or "Information Department" are often the names of the participating organizations. Degree programs at iSchools include course offerings in areas such as information architecture, design, policy, and economics; knowledge management, user experience design, and usability; preservation and conservation; librarianship and library administration; the sociology of information; and human-computer interaction and computer science. === Leadership === The executive committee of the iSchools is made up of the current chair (Ina Fourie, University of Pretoria, South Africa), past chair (Gillian Oliver, Monash University, Australia) and the chair elect (Javed Mostafa, University of Toronto Canada), plus representatives from the three regions (North America, Europe, and Asia-Pacific). The current executive director is Slava Sterzer. == Member institutions == Between 2010 and 2026, the organization expanded globally beyond North America, growing to 133 member schools as of March 2026. For an updated and complete list of member schools, please visit the member database of the iSchools. == iConferences == Members of the iSchools organize a regular academic conference, known as the iConference, hosted by a different member institution each year. September 2005: Pennsylvania State University October 2006: University of Michigan February 2008: University of California, Los Angeles February 2009: University of North Carolina February 2010: University of Illinois at Urbana-Champaign February 2011: University of Washington, Seattle February 2012: University of Toronto February 2013: University of North Texas March 2014: Humboldt-Universität zu Berlin March 2015: University of California, Irvine March 2016: Drexel University March 2017: Wuhan University March 2018: University of Sheffield and Northumbria University March 2019: University of Maryland March 2020: University of Borås (virtual only) March 2021: Renmin University of China (virtual only) February/March 2022: University of Texas at Austin, University College Dublin & Kyushu University (virtual only) March 2023: Universitat Oberta de Catalunya March 2024: Jilin University March 2025: Indiana University March/April 2026: Edinburgh Napier University 2027: Victoria University of Wellington == Other schools of information == Other information schools and programs include: Documentation Research and Training Centre, Indian Statistical Institute, Bangalore San Jose State University, School of Information University of Southern California Library Science Degree Ankara University, Department of Information and Records Management, Ankara/Turkey Marmara University, Department of Information and Records Management, Istanbul/Turkey University of Kelaniya, Department of Library and Information Science, Kelaniya/Sri Lanka University of Colombo, National Institute of Library and Information Science (NILIS), Colombo/Sri Lanka Chicago State University, Department of Information Studies

  Read more →
• 

  Webometrics

  The science of webometrics (also referred to as cybermetrics) aims to quantify the World Wide Web to get knowledge about the number and types of hyperlinks, the structure of the World Wide Web, and using patterns. According to Björneborn and Ingwersen, the definition of webometrics is "the study of the quantitative aspects of the construction and use of information resources, structures and technologies on the Web drawing on bibliometric and informetric approaches." The term webometrics was coined by Almind and Ingwersen (1997). A second definition of webometrics has also been introduced, "the study of web-based content with primarily quantitative methods for social science research goals using techniques that are not specific to one field of study", which emphasizes the development of applied methods for use in the wider social sciences. The purpose of this alternative definition was to help publicize appropriate methods outside the information-science discipline rather than to replace the original definition within information science. Similar scientific fields are: bibliometrics, informetrics, scientometrics, virtual ethnography, and web mining. One relatively straightforward measure is the "web impact factor" (WIF) introduced by Ingwersen (1998). The WIF measure may be defined as the number of web pages in a web site receiving links from other web sites, divided by the number of web pages published in the site that are accessible to the crawler. However, the use of WIF has been disregarded due to the mathematical artifacts derived from power law distributions of these variables. Other similar indicators using size of the institution instead of number of webpages have been proved more useful.

  Read more →
• 

  ISO 15926

  ISO 15926 is a standard for data integration, sharing, exchange, and hand-over between computer systems. The title, "Industrial automation systems and integration—Integration of life-cycle data for process plants including oil and gas production facilities", is regarded too narrow by the present ISO 15926 developers. Having developed a generic data model and reference data library for process plants, it turned out that this subject is already so wide, that actually any state information may be modelled with it. == History == In 1991 a European Union ESPRIT-, named ProcessBase, started. The focus of this research project was to develop a data model for lifecycle information of a facility that would suit the requirements of the process industries. At the time that the project duration had elapsed, a consortium of companies involved in the process industries had been established: EPISTLE (European Process Industries STEP Technical Liaison Executive). Initially individual companies were members, but later this changed into a situation where three national consortia were the only members: PISTEP (UK), POSC/Caesar (Norway), and USPI-NL (Netherlands). (later PISTEP merged into POSC/Caesar, and USPI-NL was renamed to USPI). EPISTLE took over the work of the ProcessBase project. Initially this work involved a standard called ISO 10303-221 (referred to as "STEP AP221"). In that AP221 we saw, for the first time, an Annex M with a list of standard instances of the AP221 data model, including types of objects. These standard instances would be for reference and would act as a knowledge base with knowledge about the types of objects. In the early nineties EPISTLE started an activity to extend Annex M to become a library of such object classes and their relationships: STEPlib. In the STEPlib activities a group of approx. 100 domain experts from all three member consortia, spread over the various expertises (e.g. Electrical, Piping, Rotating equipment, etc.), worked together to define the "core classes". The development of STEPlib was extended with many additional classes and relationships between classes and published as Open source data. Furthermore, the concepts and relation types from the AP221 and ISO 15926-2 data models were also added to the STEPlib dictionary. This resulted in the development of Gellish English, whereas STEPlib became the Gellish English dictionary. Gellish English is a structured subset of natural English and is a modeling language suitable for knowledge modeling, product modeling and data exchange. It differs from conventional modeling languages (meta languages) as used in information technology as it not only defines generic concepts, but also includes an English dictionary. The semantic expression capability of Gellish English was significantly increased by extending the number of relation types that can be used to express knowledge and information. For modelling-technical reasons POSC/Caesar proposed another standard than ISO 10303, called ISO 15926. EPISTLE (and ISO) supported that proposal, and continued the modelling work, thereby writing Part 2 of ISO 15926. This Part 2 has official ISO IS (International Standard) status since 2003. POSC/Caesar started to put together their own RDL (Reference Data Library). They added many specialized classes, for example for ANSI (American National Standards Institute) pipe and pipe fittings. Meanwhile, STEPlib continued its existence, mainly driven by some members of USPI. Since it was clear that it was not in the interest of the industry to have two libraries for, in essence, the same set of classes, the Management Board of EPISTLE decided that the core classes of the two libraries shall be merged into Part 4 of ISO 15926. This merging process has been finished. Part 4 should act as reference data for part 2 of ISO 15926 as well as for ISO 10303-221 and replaced its Annex M. On June 5, 2007 ISO 15926-4 was signed off as a TS (Technical Specification). In 1999 the work on an earlier version of Part 7 started. Initially this was based on XML Schema (the only useful W3C Recommendation available then), but when Web Ontology Language (OWL) became available it was clear that provided a far more suitable environment for Part 7. Part 7 passed the first ISO ballot by the end of 2005, and an implementation project started. A formal ballot for TS (Technical Specification) was planned for December 2007. However, it was decided then to split Part 7 into more than one part, because the scope was too wide. == Need for ISO15926 == In 2004, the National Institute of Standards and Technology (NIST) released a report on the impact of the lack of digital interoperability in the capital projects industry. The report estimated the cost of inadequate interoperability in the U.S. capital facilities industry to be $15.8 billion per year. This was considered likely to be a conservative figure. == The standard == ISO 15926 has thirteen parts (as of February 2022): Part 1 - Overview and fundamental principles Part 2 - Data model Part 3 - Reference data for geometry and topology Part 4 - Reference Data, the terms used within facilities for the process industry Part 6 - Methodology for the development and validation of reference data (under development) Part 7 - Template methodology Part 8 - OWL/RDF implementation Part 9 - Implementation standards, with the focus on standard web servers, web services, and security (under development) Part 10 - Conformance testing Part 11 - Methodology for simplified industrial usage of reference data (under development) Part 12 - Life cycle integration ontology in Web Ontology Language (OWL2) Part 13 - Integrated lifecycle asset planning === Description === The model and the library are suitable for representing lifecycle information about technical installations and their components. They can also be used for defining the terms used in product catalogs in e-commerce. Another, more limited, use of the standard is as a reference classification for harmonization purposes between shared databases and product catalogues that are not based on ISO 15926. The purpose of ISO 15926 is to provide a Lingua Franca for computer systems, thereby integrating the information produced by them. Although set up for the process industries with large projects involving many parties, and involving plant operations and maintenance lasting decades, the technology can be used by anyone willing to set up a proper vocabulary of reference data in line with Part 4. In Part 7 the concept of Templates is introduced. These are semantic constructs, using Part 2 entities, that represent a small piece of information. These constructs then are mapped to more efficient classes of n-ary relations that interlink the Nodes that are involved in the represented information. In Part 8 the Part 7 Templates are defined in OWL and instantiated in RDF. For validation and reasoning purposes all are represented in First-Order Logic as well. In Part 9 these Node and Template instances are stored in an RDF triple store, set up to a standard schema and an API. Each participating computer system maps its data from its internal format to such ISO-standard Node and Template instances. Data can be "handed over" from one triple store to another in cases where data custodianship is handed over (e.g. from a contractor to a plant owner, or from a manufacturer to the owners of the manufactured goods). Hand-over can be for a part of all data, whilst maintaining full referential integrity. Documents are user-definable. They are defined in XML Schema and they are, in essence, only a structure containing cells that make reference to instances of Templates. This represents a view on all lifecycle data: since the data model is a 4D (space-time) model, it is possible to present the data that was valid at any given point in time, thus providing a true historical record. It is expected that this will be used for Knowledge Mining. Data can be queried by means of SPARQL. In any implementation a restricted number of triple stores can be involved, with different access rights. This is done by means of creating a CPF Server (= Confederation of Participating Façades). An Ontology Browser allows for access to one or more triple stores in a given CPF, depending on the access rights. == Projects and applications == There are a number of projects working on the extension of the ISO 15926 standard in different application areas. === Capital-intensive projects === Within the application of Capital Intensive projects, some cooperating implementation projects are running: The DEXPI project: The objective of DEXPI is to develop and promote a general standard for the process industry covering all phases of the lifecycle of a (petro-)chemical plant, ranging from specification of functional requirements to assets in operation. Finalised projects include: The EDRC Project of FIATECH Capturing Equipment Data Requirements Using ISO 15926 and Assessing Conforma

  Read more →
• 

  Content Security Policy

  Content Security Policy (CSP) is a computer security standard introduced to prevent cross-site scripting (XSS), clickjacking and other code injection attacks resulting from execution of malicious content in the trusted web page context. It is a Candidate Recommendation of the W3C working group on Web Application Security, widely supported by modern web browsers. CSP provides a standard method for website owners to declare approved origins of content that browsers should be allowed to load on that website—covered types are JavaScript, CSS, HTML frames, web workers, fonts, images, embeddable objects such as Java applets, ActiveX, audio and video files, and other HTML5 features. == Status == The standard, originally named Content Restrictions, was proposed by Robert Hansen in 2004, first implemented in Firefox 4 and quickly picked up by other browsers. Version 1 of the standard was published in 2012 as W3C candidate recommendation and quickly with further versions (Level 2) published in 2014. As of 2023, the draft of Level 3 is being developed with the new features being quickly adopted by the web browsers. The following header names are in use as part of experimental CSP implementations: Content-Security-Policy – standard header name proposed by the W3C document. Google Chrome supports this as of version 25. Firefox supports this as of version 23, released on 6 August 2013. WebKit supports this as of version 528 (nightly build). Chromium-based Microsoft Edge support is similar to Chrome's. X-WebKit-CSP – deprecated, experimental header introduced into Google Chrome, Safari and other WebKit-based web browsers in 2011. X-Content-Security-Policy – deprecated, experimental header introduced in Gecko 2 based browsers (Firefox 4 to Firefox 22, Thunderbird 3.3, SeaMonkey 2.1). A website can declare multiple CSP headers, also mixing enforcement and report-only ones. Each header will be processed separately by the browser. CSP can also be delivered within the HTML code using a meta tag, although in this case its effectiveness will be limited. Internet Explorer 10 and Internet Explorer 11 also support CSP, but only sandbox directive, using the experimental X-Content-Security-Policy header. A number of web application frameworks support CSP, for example AngularJS (natively) and Django (middleware). Instructions for Ruby on Rails have been posted by GitHub. Web framework support is however only required if the CSP contents somehow depend on the web application's state—such as usage of the nonce origin. Otherwise, the CSP is rather static and can be delivered from web application tiers above the application, for example on load balancer or web server. === Bypasses === In December 2015 and December 2016, a few methods of bypassing 'nonce' allowlisting origins were published. In January 2016, another method was published, which leverages server-wide CSP allowlisting to exploit old and vulnerable versions of JavaScript libraries hosted at the same server (frequent case with CDN servers). In May 2017 one more method was published to bypass CSP using web application frameworks code. == Mode of operation == If the Content-Security-Policy header is present in the server response, a compliant client enforces the declarative allowlist policy. One example goal of a policy is a stricter execution mode for JavaScript in order to prevent certain cross-site scripting attacks. In practice this means that a number of features are disabled by default: Inline JavaScript code