AI For Business Rules

AI For Business Rules — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Moving object detection

    Moving object detection

    Moving object detection is a technique used in computer vision and image processing. Multiple consecutive frames from a video are compared by various methods to determine if any moving object is detected. Moving objects detection has been used for wide range of applications like video surveillance, activity recognition, road condition monitoring, airport safety, monitoring of protection along marine border, etc. == Definition == Moving object detection is to recognize the physical movement of an object in a given place or region. By acting segmentation among moving objects and stationary area or region, the moving objects' motion can be tracked and thus analyzed later. To achieve this, consider a video is a structure built upon single frames, moving object detection is to find the foreground moving target(s), either in each video frame or only when the moving target shows the first appearance in the video. == Traditional methods == Among all the traditional moving object detection methods, we could categorize them into four major approaches: Background subtraction, Frame differencing, Temporal Differencing, and Optical Flow. === Frame differencing === Instead of using traditional approach, to use image subtraction operator by subtracting second and images afterwards, the frame differencing method makes comparisons between two successive frames to detect moving targets. === Temporal differencing === The temporal differencing method identifies the moving object by applying pixel-wise difference method with two or three consecutive frames.

    Read more →
  • Kerckhoffs's principle

    Kerckhoffs's principle

    Kerckhoffs's principle (also called Kerckhoffs's desideratum, assumption, axiom, doctrine or law) of cryptography was stated by the Dutch cryptographer Auguste Kerckhoffs in the 19th century. The principle holds that a cryptosystem should be secure, even if everything about the system, except the key, is public knowledge. This concept is widely embraced by cryptographers, in contrast to security through obscurity, which is not. Kerckhoffs's principle was phrased by the American mathematician Claude Shannon as "the enemy knows the system", i.e., "one ought to design systems under the assumption that the enemy will immediately gain full familiarity with them". In that form, it is called Shannon's maxim. Another formulation by American researcher and professor Steven M. Bellovin is: In other words—design your system assuming that your opponents know it in detail. (A former official at NSA's National Computer Security Center told me that the standard assumption there was that serial number 1 of any new device was delivered to the Kremlin.) == Origins == The invention of telegraphy radically changed military communications and increased the number of messages that needed to be protected from the enemy dramatically, leading to the development of field ciphers which had to be easy to use without large confidential codebooks prone to capture on the battlefield. It was this environment which led to the development of Kerckhoffs's requirements. Auguste Kerckhoffs was a professor of German language at Ecole des Hautes Etudes Commerciales (HEC) in Paris. In early 1883, Kerckhoffs's article, La Cryptographie Militaire, was published in two parts in the Journal of Military Science, in which he stated six design rules for military ciphers. Translated from French, they are: The system must be practically, if not mathematically, indecipherable; It should not require secrecy, and it should not be a problem if it falls into enemy hands; It must be possible to communicate and remember the key without using written notes, and correspondents must be able to change or modify it at will; It must be applicable to telegraph communications; It must be portable, and should not require several persons to handle or operate; Lastly, given the circumstances in which it is to be used, the system must be easy to use and should not be stressful to use or require its users to know and comply with a long list of rules. Some are no longer relevant given the ability of computers to perform complex encryption. The second rule, now known as Kerckhoffs's principle, is still critically important. == Explanation of the principle == Kerckhoffs viewed cryptography as a rival to, and a better alternative than, steganographic encoding, which was common in the nineteenth century for hiding the meaning of military messages. One problem with encoding schemes is that they rely on humanly-held secrets such as "dictionaries" which disclose for example, the secret meaning of words. Steganographic-like dictionaries, once revealed, permanently compromise a corresponding encoding system. Another problem is that the risk of exposure increases as the number of users holding the secrets increases. Nineteenth century cryptography, in contrast, used simple tables which provided for the transposition of alphanumeric characters, generally given row-column intersections which could be modified by keys which were generally short, numeric, and could be committed to human memory. The system was considered "indecipherable" because tables and keys do not convey meaning by themselves. Secret messages can be compromised only if a matching set of table, key, and message falls into enemy hands in a relevant time frame. Kerckhoffs viewed tactical messages as only having a few hours of relevance. Systems are not necessarily compromised, because their components (i.e. alphanumeric character tables and keys) can be easily changed. === Advantage of secret keys === Using secure cryptography is supposed to replace the difficult problem of keeping messages secure with a much more manageable one, keeping relatively small keys secure. A system that requires long-term secrecy for something as large and complex as the whole design of a cryptographic system obviously cannot achieve that goal. It only replaces one hard problem with another. However, if a system is secure even when the enemy knows everything except the key, then all that is needed is to manage keeping the keys secret. There are a large number of ways the internal details of a widely used system could be discovered. The most obvious is that someone could bribe, blackmail, or otherwise threaten staff or customers into explaining the system. In war, for example, one side will probably capture some equipment and people from the other side. Each side will also use spies to gather information. If a method involves software, someone could do memory dumps or run the software under the control of a debugger in order to understand the method. If hardware is being used, someone could buy or steal some of the hardware and build whatever programs or gadgets needed to test it. Hardware can also be dismantled so that the chip details can be examined under the microscope. === Maintaining security === A generalization some make from Kerckhoffs's principle is: "The fewer and simpler the secrets that one must keep to ensure system security, the easier it is to maintain system security." Bruce Schneier ties it in with a belief that all security systems must be designed to fail as gracefully as possible: Kerckhoffs's principle applies beyond codes and ciphers to security systems in general: every secret creates a potential failure point. Secrecy, in other words, is a prime cause of brittleness—and therefore something likely to make a system prone to catastrophic collapse. Conversely, openness provides ductility. Any security system depends crucially on keeping some things secret. However, Kerckhoffs's principle points out that the things kept secret ought to be those least costly to change if inadvertently disclosed. For example, a cryptographic algorithm may be implemented by hardware and software that is widely distributed among users. If security depends on keeping that secret, then disclosure leads to major logistic difficulties in developing, testing, and distributing implementations of a new algorithm – it is "brittle". On the other hand, if keeping the algorithm secret is not important, but only the keys used with the algorithm must be secret, then disclosure of the keys simply requires the simpler, less costly process of generating and distributing new keys. == Applications == In accordance with Kerckhoffs's principle, the majority of civilian cryptography makes use of publicly known algorithms. By contrast, ciphers used to protect classified government or military information are often kept secret (see Type 1 encryption). However, it should not be assumed that government/military ciphers must be kept secret to maintain security. It is possible that they are intended to be as cryptographically sound as public algorithms, and the decision to keep them secret is in keeping with a layered security posture. == Security through obscurity == It is moderately common for companies to keep the inner workings of a system secret. Some argue this "security by obscurity" makes the product safer and less vulnerable to attack. A counter-argument is that keeping the innards secret may improve security in the short term, but in the long run, only systems that have been published and analyzed should be trusted. Steven Bellovin and Randy Bush commented: Security Through Obscurity Considered Dangerous Hiding security vulnerabilities in algorithms, software, and/or hardware decreases the likelihood they will be repaired and increases the likelihood that they can and will be exploited. Discouraging or outlawing discussion of weaknesses and vulnerabilities is extremely dangerous and deleterious to the security of computer systems, the network, and its citizens. Open Discussion Encourages Better Security The long history of cryptography and cryptoanalysis has shown time and time again that open discussion and analysis of algorithms exposes weaknesses not thought of by the original authors, and thereby leads to better and more secure algorithms. As Kerckhoffs noted about cipher systems in 1883 [Kerc83], "Il faut qu'il n'exige pas le secret, et qu'il puisse sans inconvénient tomber entre les mains de l'ennemi." (Roughly, "the system must not require secrecy and must be able to be stolen by the enemy without causing trouble.")

    Read more →
  • Chunked transfer encoding

    Chunked transfer encoding

    Chunked transfer encoding is a streaming data transfer mechanism available in Hypertext Transfer Protocol (HTTP) version 1.1, defined in RFC 9112 §7.1. In chunked transfer encoding, the data stream is divided into a series of non-overlapping "chunks". The chunks are sent out and received independently of one another. At any given time, no knowledge of the data stream outside the currently-being-processed chunk is necessary for either the sender or the receiver. Each chunk is preceded by its size in bytes and transmission ends when a zero-length chunk is received. The chunked keyword in the Transfer-Encoding header is used to indicate chunked transfer. Chunked transfer encoding is not supported in HTTP/2, which provides its own mechanisms for data streaming. == Rationale == The introduction of chunked encoding provided various benefits: Chunked transfer encoding allows a server to maintain an HTTP persistent connection for dynamically generated content. In this case, the HTTP Content-Length header cannot be used to delimit the content and the next HTTP request/response, as the content size is not yet known. Chunked encoding has the benefit that it is not necessary to generate the full content before writing the header, as it allows streaming of content as chunks and explicitly signaling the end of the content, making the connection available for the next HTTP request/response. Chunked encoding allows the sender to send additional header fields after the message body. This is important in cases where values of a field cannot be known until the content has been produced, such as when the content of the message must be digitally signed. Without chunked encoding, the sender would have to buffer the content until it was complete in order to calculate a field value and send it before the content. == Applicability == For version 1.1 of the HTTP protocol, the chunked transfer mechanism is considered to be always and anyway acceptable, even if not listed in the Transfer-Encoding (TE) request header field, and when used with other transfer mechanisms, should always be applied last to the transferred data and never more than one time. This transfer encoding method also allows additional entity header fields to be sent after the last chunk if the client specified the "trailers" parameter as an argument of the TE request field. The origin server of the response can also decide to send additional entity trailers even if the client did not specify the "trailers" parameter, but only if the metadata is optional (i.e. the client can use the received entity without them). Whenever the trailers are used, the server should list their names in the Trailer header field; three header field types are specifically prohibited from appearing as a trailer field: Content-Length, Trailer, and Transfer-Encoding. == Format == If a Transfer-Encoding field with a value of "chunked" is specified in an HTTP message (either a request sent by a client or the response from the server), the body of the message consists of one or more chunks and one terminating chunk with an optional trailer before the final ␍␊ sequence (i.e. carriage return followed by line feed). Each chunk starts with the number of octets of the data it embeds expressed as a hexadecimal number in ASCII followed by optional parameters (chunk extension) and a terminating ␍␊ sequence, followed by the chunk data. The chunk is terminated by ␍␊. If chunk extensions are provided, the chunk size is terminated by a semicolon and followed by the parameters, each also delimited by semicolons. Each parameter is encoded as an extension name followed by an optional equal sign and value. These parameters could be used for a running message digest or digital signature, or to indicate an estimated transfer progress, for instance. The terminating chunk is a special chunk of zero length. It may contain a trailer, which consists of a (possibly empty) sequence of entity header fields. Normally, such header fields would be sent in the message's header; however, it may be more efficient to determine them after processing the entire message entity. In that case, it is useful to send those headers in the trailer. Header fields that regulate the use of trailers are Transfer-Encoding with the "trailers" parameter (used in requests) and Trailer (used in responses). == Use with compression == HTTP servers often use compression to optimize transmission, for example with Content-Encoding: gzip or Content-Encoding: deflate. If both compression and chunked encoding are enabled, then the content stream is first compressed, then chunked; so the chunk encoding itself is not compressed, and the data in each chunk is compressed holistically (i.e. based on the whole content). The remote endpoint then decodes the stream by concatenating the chunks and uncompressing the result. == Example == === Encoded data === The following example contains three chunks of size 4, 7, and 11 (hexadecimal "B") octets of data. 4␍␊Wiki␍␊7␍␊pedia i␍␊B␍␊n ␍␊chunks.␍␊0␍␊␍␊ Below is an annotated version of the encoded data. 4␍␊ (chunk size is four octets) Wiki (four octets of data) ␍␊ (end of chunk) 7␍␊ (chunk size is seven octets) pedia i (seven octets of data) ␍␊ (end of chunk) B␍␊ (chunk size is eleven octets) n ␍␊chunks. (eleven octets of data) ␍␊ (end of chunk) 0␍␊ (chunk size is zero octets, no more chunks) ␍␊ (end of final chunk with zero data octets) Note: Each chunk's size excludes the two ␍␊ bytes that terminate the data of each chunk. === Decoded data === Decoding the above example produces the following octets: Wikipedia in ␍␊chunks. The bytes above are typically displayed as Wikipedia in chunks.

    Read more →
  • Bitcoin Satoshi Vision

    Bitcoin Satoshi Vision

    Bitcoin Satoshi Vision (BSV) is a cryptocurrency that is a hard fork of Bitcoin Cash. Bitcoin Satoshi Vision was created in November 2018 by a group of individuals led by Craig Steven Wright, who has claimed since 2015 to be Satoshi Nakamoto, the creator of the original bitcoin. == History == === 2018 split from Bitcoin Cash === On 15 November 2018, a hard fork chain split of Bitcoin Cash occurred between two rival factions called Bitcoin Cash and Bitcoin SV. On 15 November 2018 Bitcoin Cash traded at about $289, and Bitcoin SV traded at about $96.50, down from $425.01 on 14 November for the un-split Bitcoin Cash. The split originated from what was described as a "civil war" in two competing Bitcoin Cash camps. The first camp, supported by entrepreneur Roger Ver and Jihan Wu of Bitmain, promoted the software entitled Bitcoin ABC (short for Adjustable Blocksize Cap), which would maintain the block size at 32 MB. The second camp led by Craig Steven Wright and billionaire Calvin Ayre put forth a competing software version Bitcoin SV, short for "Bitcoin Satoshi Vision", which would increase the block size limit to 128 MB. === 2019 de-listing from Binance === In April 2019, an online feud broke out between those who supported the claims of Bitcoin SV supporter Craig Wright that he was Satoshi Nakamoto, and those who did not. The feud resulted in cryptocurrency exchange Binance de-listing Bitcoin SV from their platform, stating that: At Binance, we periodically review each digital asset we list to ensure that it continues to meet the high level of standard we expect. When a coin or token no longer meets this standard, or the industry changes, we conduct a more in-depth review and potentially delist it. We believe this best protects all of our users. When we conduct these reviews, we consider a variety of factors. Here are some that drive whether we decide to delist a digital asset: Commitment of team to project Level and quality of development activity Network / smart contract stability Level of public communication Responsiveness to our periodic due diligence requests Evidence of unethical / fraudulent conduct Contribution to a healthy and sustainable crypto ecosystem === 2021 network attack === In August 2021, Bitcoin SV suffered a 51% attack, after previously suffering attacks in June and July of the same year. Such an attack involves cryptocurrency miners gaining control of more than half of a network's computing power; these kinds of network attacks have the goal of preventing new transactions from gaining confirmations, allowing the attackers to double-spend coins. Adam James, senior editor at OKEx Insights claimed that "In the intermediate term, the attack has seemingly somewhat-negligible impact on its current price action," however "Faith in [Bitcoin SV] will likely be reduced following the incident." === 2024 high court ruling === In March 2024, Mr Justice James Mellor in the British High Court ruled that Wright is not Satoshi Nakamoto.

    Read more →
  • Shepp–Logan phantom

    Shepp–Logan phantom

    The Shepp–Logan phantom is a standard test image created by Larry Shepp and Benjamin F. Logan for their 1974 paper "The Fourier Reconstruction of a Head Section". It serves as the model of a human head in the development and testing of image reconstruction algorithms. == Definition == The function describing the phantom is defined as the sum of 10 ellipses inside a 2×2 square:

    Read more →
  • Content-oriented workflow models

    Content-oriented workflow models

    In data management, a content-oriented workflow model seeks to articulate workflow progression by the presence of content units (like data-records/objects/documents). Most content-oriented workflow approaches provide a life-cycle model for content units, such that workflow progression can be qualified by conditions on the state of the units. Most approaches are research and work in progress and the content models and life-cycle models are more or less formalized. The term content-oriented workflows is an umbrella term for several scientific workflow approaches, namely "data-driven", "resource-driven", "artifact-centric", "object-aware", and "document-oriented". Thus, the meaning of "content" ranges from simple data attributes to self-contained documents; the term "content-oriented workflows" appeared at first in as an umbrella term. Such a general term, independent from a specific approach, is necessary to contrast the content-oriented modelling principle with traditional activity-oriented workflow models (like Petri nets or BPMN) where a workflow is driven by a control flow and where the content production perspective is neglected or even missing. The term "content" was chosen to subsume the different levels in granularity of the content units in the respective workflow models; it was also chosen to make associations with content management. Both terms "artifact-centric" and "data-driven" would also be good candidates for an umbrella term, but each is closely related to a specific approach of a single working group. The "artifact-centric" group itself (i.e. IBM Research) has generalized the characteristics of their approach and has used "information-centric" as an umbrella term in. Yet, the term information is too unspecific in the context of computer science, thus, "content-orientated workflows" is considered as good compromise. == Workflow Model Approaches == === Data-driven === The data-driven process structures provides a sophisticated workflow model being specialized on hierarchical write-and-review-processes. The approach provides interleaved synchronization of sub-processes and extends activity diagrams. Unfortunately, the COREPRO prototype implementation is not publicly available. Research on the project had been ceased. The general idea has been continued by Reichert in form of the #Object-aware approach. Synonyms data-driven process structures / data-driven modeling and coordination Protagonists Dr. Dominic Müller (University of Twente), Joachim Herbst (DaimlerChrysler Research), and Manfred Reichert (at this time Assoc. Prof. at Univ. of Twente, currently Prof. at Ulm Univ.) Organization(s) University of Twente, DaimlerChrysler Period 2005 - 2007 Selected publications Implementation COREPRO === Resource-driven === The resource-driven workflow system is an early approach that considered workflows from a content-oriented perspective and emphasizes on the missing support for plain document-driven processes by traditional activity-oriented workflow engines. The resource-driven approach demonstrated the application of database triggers for handling workflow events. Still the system implementation is centralized and the workflow schema is statically defined. The project appeared in 2005 but many aspects are considered future work by the authors. Research did not continue on the project. Wang completed his PhD thesis in 2009, yet, his thesis does not mention the resource-driven approach to workflow modelling but is about discrete event simulation. Synonyms Resource-based Workflows / Document-Driven Workflow Systems Protagonists Jianrui Wang and Prof. Akhil Kumar Organization Pennsylvania State University Period 2005 - today Selected publications Implementation N/A === Artifact-centric === The artifact-centric approach provides a framework for content-oriented workflows. In this model, the enterprise application landscape includes distributed business services, while the workflow engine is centralized. Process enactment is integrated with database management system infrastructure, and the project is funded by IBM. Synonyms artifact-centric business process models / artifact-based business process (ACP) / artifact-centric workflows Protagonists Richard Hull and Dr. Kamal Bhattacharya as well as Cagdas E. Gerede and Jianwen Su Organization IBM (T.J. Watson Research Center, NY) Period 2007 - today Selected publications Implementation ArtiFact === Object-aware === The object-aware approach manages a set of object types and generates forms for creating object instances. The form completion flow is controlled by transitions between object configurations each describing a progressing set of mandatory attributes. Each object configuration is named by an object state. The data production flow is user-shifting and it is discrete by defining a sequence of object states. The discussion is currently limited to a centralized system, without any workflows across different organizations. However, the approach is of great relevance to many domains like concurrent engineering. Finally, the object-aware approach and its PHILharmonicFlows system are going to provide general-purpose workflow systems for generic enactment of data production processes. Synonyms object-aware process management / datenorientiertes Prozess-Management-System Protagonists Vera Künzle and Prof. Manfred Reichert Organization Ulm University Period 2009 - today Selected publications Implementation PHILharmonicFlows === Distributed Document-oriented === Distributed document-oriented process management (dDPM) enables distributed case handling in heterogeneous system environments and it is based on document-oriented integration. The workflow model reflects the paper-based working practice in inter-institutional healthcare scenarios. It targets distributed knowledge-driven ad hoc workflows, wherein distributed information systems are required to coordinate work with initially unknown sets of actors and activities. The distributed workflow engine supports process planning & process history as well as participant management and process template creation with import/export. The workflow engine embeds a functional fusion of 1) group-based instant messaging 2) with a shared work list editor 3) with version control. The software implementation of dDPM is α-Flow which is available as open source. dDPM and α-Flow provide a content-oriented approach to schema-less workflows. The complete distributed case handling application is provided in form of a single active Document ("α-Doc"). The α-Doc is a case file (as information carrier) with an embedded workflow engine (in form of active properties). Inviting process participants is equivalent to providing them with a copy of an α-Doc, copying it like an ordinary desktop file. All α-Docs that belong to the same case can synchronize each other, based on the participant management, electronic postboxes, store-and-forward messaging, and an offline-capable synchronization protocol. Synonyms distributed document-oriented process management (dDPM), distributed case handling via active documents Protagonists Christoph P. Neumann and Prof. Richard Lenz Organization Friedrich-Alexander-Universität Erlangen-Nürnberg Period 2009 - 2012 Selected Publications and a PhD thesis Implementation α-Flow (open source) == Related Concepts == === Content Management === The bandwidth of Content management systems (CMS) reaches from Web content management systems (WCMS) and Document management system (DMS) to Enterprise Content Management (ECM). Mature DMS products support document production workflows in a basic form, primarily focusing on review cycle workflows concerning a single document. === Groupware and Computer-Supported Cooperative Work === Groupware focuses on messaging (like E-Mail, Chat, and Instant Messaging), shared calendars (e.g. Lotus Notes, Microsoft Outlook with Exchange Server), and conferencing (e.g. Skype). Groupware overlaps with Computer-supported cooperative work (CSCW), that originated from shared multimedia editors (for live drawing/sketching) and synchronous multi-user applications like desktop sharing. The extensive conceptual claim of CSWC must be put into perspective by its actual solution scope, that is available as the CSCW Matrix. === Case Handling === The case handling paradigm stems from Prof. van der Aalst and gained momentum in 2005. The core features are: (a) provide all information available, i.e. present the case as a whole rather than showing bits and pieces, (b) decide about activities on the basis of the information available rather than the activities already executed, (c) separate work distribution from authorization and allow for additional types of roles, not just the execute role, and (d) allow workers to view and add/modify data before or after the corresponding activities have been executed. In healthcare, the flow of a patient between healthcare professionals is considered as a workflow - with activities that inc

    Read more →
  • Social collaboration

    Social collaboration

    Social collaboration refers to processes that help multiple people or groups interact and share information to achieve common goals. Such processes find their 'natural' environment on the Internet, where collaboration and social dissemination of information are made easier by current innovations and the proliferation of the web. Sharing concepts on a digital collaboration environment often facilitates a "brainstorming" process, where new ideas may emerge due to the varied contributions of individuals. These individuals may hail from different walks of life, different cultures and different age groups, their diverse thought processes help in adding new dimensions to ideas, dimensions that previously may have been missed. A crucial concept behind social collaboration is that 'ideas are everywhere.' Individuals are able to share their ideas in an unrestricted environment as anyone can get involved and the discussion is not limited to only those who have domain knowledge. Social collaboration is also known as enterprise social networking, and the products to support it are often branded enterprise social networks (ESNs). It is important that we understand the rhythm of social collaboration. There needs to be a balance, with ease to move from focused solitary work to brainstorming for problem solving in group work. This critical balance can be achieved by creating structures or a work environment where it is not too rigid to prevent brainstorming in group work nor too loose to result in total chaos. Social collaboration should happen at the edge of chaos. Work practices should support social collaboration. The most effective environment is one that supports opportunistic planning. Opportunistic planning provides a general plan but then gives enough room for flexibility to change activities and tasks until the last moment. This way, people are able to cope up with unforeseen developments and not throwing away everything with one grand plan. == Comparison to social networking == Social collaboration is related to social networking, with the distinction that while social networking is individual-centric, social collaboration is entirely group-centric. Generally speaking, social networking means socializing for personal, professional or entertainment purposes, for example, LinkedIn and Facebook. Social collaboration, on the other hand, means working socially to achieve a common goal, for example, GitHub and Quora. Social networking services generally focus on individuals sharing messages in a more-or-less undirected way and receiving messages from many sources into a single personalized activity feed. Social collaboration services, on the other hand, focus on the identification of groups and collaboration spaces in which messages are explicitly directed at the group and the group activity feed is seen the same way by everyone. Social collaboration may refer to time-bound collaborations with an explicit goal to be completed or perpetual collaborations in which the goal is knowledge sharing (e.g. community of practice, online community). == Comparison to crowdsourcing == Social collaboration is similar to crowdsourcing as it involves individuals working together towards a common goal. Crowdsourcing is a method for harnessing specific information from a large, diverse group of people. Unlike social collaboration, which involves much communication and cooperation among a large group of people, crowdsourcing is more like individuals working towards the common goal relatively independently. Therefore, the process of working involves less communication. Andrea Grover, curator of a crowdsourcing art show, explained that collaboration among individuals is an appealing experience, because participation is "a low investment, with the possibility of a high return." == Social collaboration software == Notable social collaboration software includes Glip messaging, Google Apps, Knowledge Plaza Electronic Document System and Social Intranet, Microsoft Lync social collaboration tool for businesses, Slack, Weekdone for managers, and Wrike. == Future == Social collaboration is going to be used as a tool in companies to enhance productivity. Social workers could be able to use social collaboration tools to manage personal tasks, professional projects and social networks with other colleagues within the same organization. Social collaboration will serve as a platform to get people involved and connected. This kind of platform provides a spiritual training practice for social workers. Social collaboration software could help enhance the communication between customers and employees and build trust in the organization. When we need real-time chat, it would be excellent to include every participant in a shared and archived forum which keeps a record of important information and logs. So collaborators need not worry about losing important records while working towards the common goal. The interactive communication and synchronous environment promote understanding among colleagues. Collaboration helps in building strong relationships between workers, which in turn leads to faster problem solving. The close connection between workers and customers creates a scalable organization which naturally increases the trust and faith that customers have in the company. Therefore, the interactive customer relationship levels up customer satisfaction in ways that traditional collaboration methods cannot. Apart from its effect on the way work will be conducted in the future, social collaboration will also affect society. In the coming years social collaboration will be the driving force in societal change as more and more people work together to get their vision across to governments and governing agencies. An example of this is Change.org, an online petition tool where users can help bring their government's attention to pressing social issues that need to be addressed.

    Read more →
  • Conditional disclosure of secrets

    Conditional disclosure of secrets

    Conditional disclosure of secrets (CDS) is a primitive, studied in information-theoretic cryptography, that allows distributed, non-communicating parties to coordinate the release of information to a third party. CDS was initially introduced for use in the context of private information retrieval, and has been related to communication complexity and non-local quantum computation. == Definition of conditional disclosure of secrets == The conditional disclosure of secrets setting involves three players; Alice, Bob and the referee. Alice receives an input x ∈ { 0 , 1 } n {\displaystyle x\in \{0,1\}^{n}} and a secret z ∈ { 0 , 1 } {\displaystyle z\in \{0,1\}} , and Bob receives a string y ∈ { 0 , 1 } n {\displaystyle y\in \{0,1\}^{n}} . A choice of Boolean function f : { 0 , 1 } 2 n → { 0 , 1 } {\displaystyle f:\{0,1\}^{2n}\rightarrow \{0,1\}} is fixed in advance and known to all players. Alice and Bob cannot communicate with one another, but share a string of random bits which we label r {\displaystyle r} . Alice and Bob compute messages m A = m A ( x , z , r ) {\displaystyle m_{A}=m_{A}(x,z,r)} and m B = m B ( y , r ) {\displaystyle m_{B}=m_{B}(y,r)} , which they send to the referee. The referee knows ( x , y ) {\displaystyle (x,y)} . A CDS protocol consists of the encoding maps applied by Alice and Bob. A protocol is said to be ϵ {\displaystyle \epsilon } -correct if, for all ( x , y ) ∈ f − 1 ( 1 ) {\displaystyle (x,y)\in f^{-1}(1)} , the referee can determine z {\displaystyle z} with probability 1 − ϵ {\displaystyle 1-\epsilon } . A protocol is said to be δ {\displaystyle \delta } -secure if, for all ( x , y ) ∈ f − 1 ( 0 ) {\displaystyle (x,y)\in f^{-1}(0)} the distribution of the messages is δ {\displaystyle \delta } close to a simulator distribution (in total variation distance), where the simulator distribution is independent of z {\displaystyle z} . The communication complexity of a CDS protocol P is the total number of bits of message sent by Alice and Bob. The CDS communication cost of a function, C D S ϵ , δ ( f ) {\displaystyle CDS_{\epsilon ,\delta }(f)} is the minimal communication cost of an ϵ {\displaystyle \epsilon } -correct, δ {\displaystyle \delta } secure protocol that implements f {\displaystyle f} . The randomness complexity and randomness cost of implementing a function in the CDS model are defined similarly, but consider the number of bits of shared random bits held by Alice and Bob. == Basic properties of the primitive == === Amplification === Supposing we have an ϵ {\displaystyle \epsilon } -correct and δ {\displaystyle \delta } -secure CDS protocol, it is known that we can find a new protocol which reduces the correctness and privacy errors at the expense of an increased communication and randomness cost. More specifically, the following theorem has been proven Theorem (Amplification). A CDS protocol for f which supports a single-bit secret with privacy and correctness error of 1/3 can be transformed into a new CDS protocol with privacy and correctness error of 2 − Ω ( k ) {\displaystyle 2^{-\Omega (k)}} and communication/randomness complexity which are larger than those of the original protocol by a multiplicative factor of O(k). In fact, somewhat more than the above theorem is true in that the size of the secret can also be made to be of length k {\displaystyle k} , while simultaneously reducing the correctness and privacy errors as above. The proof involves first encoding the secret z {\displaystyle z} into a secret sharing scheme, and then running the original CDS protocol on each share of the resulting scheme. === Closure === If a CDS protocol for a function f {\displaystyle f} is known, then certain simple modifications of f {\displaystyle f} have CDS protocols with similar efficiency. The simplest case is to consider a CDS protocol for function f {\displaystyle f} and ask for a similarly efficient protocol for the negation of f {\displaystyle f} , labelled ¬ f {\displaystyle \neg f} . This is addressed by the following theorem Theorem (CDS is closed under complement). Suppose that f has a CDS protocol with randomness cost of ρ {\displaystyle \rho } bits, communication complexity of t {\displaystyle t} bits, and privacy and correctness errors δ = ϵ = 2 − k {\displaystyle \delta =\epsilon =2^{-k}} . Then ¬ f {\displaystyle \neg f} has a CDS scheme with similar privacy and correctness errors, and randomness and communication complexity of O ( k 3 ρ 2 t + k 3 ρ 3 ) {\displaystyle O(k^{3}\rho ^{2}t+k^{3}\rho ^{3})} . The cost of a CDS protocol is also closed under formula's, in the following sense. Consider two functions f 1 {\displaystyle f_{1}} and f 2 {\displaystyle f_{2}} . Then, the communication and randomness costs of f 1 ∧ f 2 {\displaystyle f_{1}\wedge f_{2}} as well as f 1 ∨ f 2 {\displaystyle f_{1}\vee f_{2}} are not much larger than the sum of the costs for f 1 {\displaystyle f_{1}} and f 2 {\displaystyle f_{2}} . See Applebaum et al. for a precise statement. == Upper and lower bounds on communication cost == Given a function f {\displaystyle f} we would like to understand the communication and randomness costs to implement f {\displaystyle f} in the CDS setting. Towards understanding this, protocols for implementing CDS have been developed (which give an upper bound on the cost) and lower bound strategies have been developed. For most functions, there is a large gap between the known upper and lower bound, so understanding the cost of CDS remains largely an open problem. This section presents some of what is known so far about the cost of CDS. === Secret sharing based upper bound === A subject with a close relationship to CDS is secret sharing. Secret sharing constructions provide an upper bound on the cost of CDS protocols. A secret sharing scheme encodes a secret, s {\displaystyle s} into a set of shares S 1 , . . . , S n {\displaystyle S_{1},...,S_{n}} . Associated to any secret sharing scheme is an access structure, which consists of a set of authorized sets A = A 1 , . . . , A k {\displaystyle {\mathcal {A}}={A_{1},...,A_{k}}} with A i ⊆ { S 1 , . . . , S n } {\displaystyle A_{i}\subseteq \{S_{1},...,S_{n}\}} . The authorized sets are those subsets of the A i {\displaystyle A_{i}} from which it is possible to recover the secret recorded into the scheme. A succinct way to describe an access structure is in terms of a function f A : { 0 , 1 } n → { 0 , 1 } {\displaystyle f_{\mathcal {A}}:\{0,1\}^{n}\rightarrow \{0,1\}} . Each subset of the shares K [ x ] ⊂ { S 1 , . . . , S n } {\displaystyle K[x]\subset \{S_{1},...,S_{n}\}} is labelled by a string x ∈ { 0 , 1 } n {\displaystyle x\in \{0,1\}^{n}} such that x i = 1 {\displaystyle x_{i}=1} if and only if S i ∈ K {\displaystyle S_{i}\in K} . Then we define f A {\displaystyle f_{\mathcal {A}}} to be such that f A ( x ) = 1 {\displaystyle f_{\mathcal {A}}(x)=1} if and only if K [ x ] ∈ A {\displaystyle K[x]\in {\mathcal {A}}} . In words, the function f A {\displaystyle f_{\mathcal {A}}} is 1 when given an authorized subset as input, and 0 otherwise. A basic result in the theory of secret sharing is that an access structure A {\displaystyle {\mathcal {A}}} can be realized in a secret sharing scheme if and only if f A {\displaystyle f_{\mathcal {A}}} is monotone. The size of a secret sharing scheme is defined as the total number of bits in the shares S i {\displaystyle S_{i}} . For monotone functions, there is an upper bound on the communication cost in CDS for any monotone function f {\displaystyle f} in terms of the size of any secret sharing scheme with access structure given by f {\displaystyle f} , C D S ϵ = 0 , δ = 0 ( f ) ≤ S h a r i n g S i z e ( f ) {\displaystyle CDS_{\epsilon =0,\delta =0}(f)\leq SharingSize(f)} For some concrete classes of secret sharing schemes, this relationship can be extended to general (non-monotone) Boolean functions. This leads to an upper bound on CDS cost in terms of the size of any span program that computes f {\displaystyle f} , C D S ϵ = 0 , δ = 0 ( f ) ≤ S P k ( f ) {\displaystyle CDS_{\epsilon =0,\delta =0}(f)\leq SP_{k}(f)} The class of problems with efficient (polynomial size) span program is the complexity class M o d k L {\displaystyle Mod_{k}L} , so problems in this class have efficient CDS protocols. === Sub-exponential upper bounds for all functions === Using a matching vector family based construction, it has been proven that ∀ f , C D S ϵ = 0 , δ = 0 ( f ) ≤ 2 O ( n log ⁡ n ) {\displaystyle \forall f,\,\,\,\,\,\,CDS_{\epsilon =0,\delta =0}(f)\leq 2^{O({\sqrt {n\log n}})}} . The technique for this proof is similar to one used to prove upper bounds on private information retrieval. This upper bound on CDS also leads to sub-exponential upper bounds on the size of a large class of secret sharing schemes. === Lower bounds from communication complexity === In a CDS protocol, the referee is given the inputs ( x , y ) {\displaystyle (x,y)} . This means it is not clear if the messages sent by Alice a

    Read more →
  • YrWall

    YrWall

    YrWall is a Digital Graffiti Wall developed by event company Luma, where designs are created on a large wall using a modified spray paint can. The can contains no paint, instead it has an IR light which is tracked by a computer vision system and the image immediately back-projected onto the wall. The inbuilt YrWall software has much of the functionality of a typical computer paint program, with a pop-out interface which enables users to change colour, spray width, opacity, work with stencils and use animated items such as swirls, stars, drips and splats. Recent additions to YrWall include options to email a JPEG of the completed design and create personalised stickers and T-shirts. == Dragons' Den == The inventor of YrWall, Tom Hogan, and his business partner, Tim Williams, appeared on Episode 4 of Series 8 of the BBC show Dragons' Den. Seeking investment in YrWall, the entrepreneurs were successful in gaining £50,000 for 40% of the YrWall parent company Lumacoustics from Dragons Deborah Meaden and Peter Jones. == World's Largest Interactive Graffiti Wall == In September 2009 YrWall was used to create the 'World's Largest Interactive Graffiti Wall' at the Bristol Festival, UK. Artists used the standard 3.5 m2 YrWall to produce artwork which was in turn projected live onto a 26m x 10m space on the side of the iconic Lloyds amphitheatre building.

    Read more →
  • InfiniBand

    InfiniBand

    InfiniBand (IB) is a computer networking standard used in high-performance computing that features very high throughput and very low latency. It is used for data interconnect both among and within computers. InfiniBand is also used as either a direct or switched interconnect between servers and storage systems, as well as an interconnect between storage systems. It is designed to be scalable and uses a switched fabric network topology. Between 2014 and June 2016, it was the most commonly used interconnect in the TOP500 list of supercomputers. Mellanox (acquired by Nvidia) manufactures InfiniBand host bus adapters and network switches, which are used by large computer system and database vendors in their product lines. As a computer cluster interconnect, IB competes with Ethernet, Fibre Channel, and Intel Omni-Path. The technology is promoted by the InfiniBand Trade Association. == History == InfiniBand originated in 1999 from the merger of two competing designs: Future I/O and Next Generation I/O (NGIO). NGIO was led by Intel, with a specification released in 1998, and joined by Sun Microsystems and Dell. Future I/O was backed by Compaq, IBM, and Hewlett-Packard. This led to the formation of the InfiniBand Trade Association (IBTA), which included both sets of hardware vendors as well as software vendors such as Microsoft. At the time it was thought some of the more powerful computers were approaching the interconnect bottleneck of the PCI bus, in spite of upgrades like PCI-X. Version 1.0 of the InfiniBand Architecture Specification was released in 2000. Initially the IBTA vision for IB was simultaneously a replacement for PCI in I/O, Ethernet in the machine room, cluster interconnect and Fibre Channel. IBTA also envisaged decomposing server hardware on an IB fabric. Mellanox had been founded in 1999 to develop NGIO technology, but by 2001 shipped an InfiniBand product line called InfiniBridge at 10 Gbit/second speeds. Following the burst of the dot-com bubble there was hesitation in the industry to invest in such a far-reaching technology jump. By 2002, Intel announced that instead of shipping IB integrated circuits ("chips"), it would focus on developing PCI Express, and Microsoft discontinued IB development in favor of extending Ethernet. Sun Microsystems and Hitachi continued to support IB. In 2003, the System X supercomputer built at Virginia Tech used InfiniBand in what was estimated to be the third largest computer in the world at the time. The OpenIB Alliance (later renamed OpenFabrics Alliance) was founded in 2004 to develop an open set of software for the Linux kernel. By February, 2005, the support was accepted into the 2.6.11 Linux kernel. In November 2005 storage devices finally were released using InfiniBand from vendors such as Engenio. Cisco, desiring to keep technology superior to Ethernet off the market, adopted a "buy to kill" strategy. Cisco successfully killed InfiniBand switching companies such as Topspin via acquisition. Of the top 500 supercomputers in 2009, Gigabit Ethernet was the internal interconnect technology in 259 installations, compared with 181 using InfiniBand. In 2010, market leaders Mellanox and Voltaire merged, leaving just one other IB vendor, QLogic, primarily a Fibre Channel vendor. At the 2011 International Supercomputing Conference, links running at about 56 gigabits per second (known as FDR, see below), were announced and demonstrated by connecting booths in the trade show. In 2012, Intel acquired QLogic's InfiniBand technology, leaving only one independent supplier. By 2014, InfiniBand was the most popular internal connection technology for supercomputers, although within two years, 10 Gigabit Ethernet started displacing it. In 2016, it was reported that Oracle Corporation (an investor in Mellanox) might engineer its own InfiniBand hardware. In 2019 Nvidia acquired Mellanox, the last independent supplier of InfiniBand products. == Specification == Specifications are published by the InfiniBand trade association. === Performance === Original names for speeds were single-data rate (SDR), double-data rate (DDR) and quad-data rate (QDR) as given below. Subsequently, other three-letter initialisms were added for even higher data rates. Notes Each link is duplex. Links can be aggregated: most systems use a 4 link/lane connector (QSFP). HDR often makes use of 2x links (aka HDR100, 100 Gb link using 2 lanes of HDR, while still using a QSFP connector). NDR introduced OSFP connectors which host one or two links at 2x (NDR200) or 4x (NDR400). They are not logically configured as a single 8x link, even when connecting switches together with an OSFP cable. InfiniBand provides remote direct memory access (RDMA) capabilities for low CPU overhead. === Topology === InfiniBand uses a switched fabric topology, as opposed to early shared medium Ethernet. All transmissions begin or end at a channel adapter. Each processor contains a host channel adapter (HCA) and each peripheral has a target channel adapter (TCA). These adapters can also exchange information for security or quality of service (QoS). === Messages === InfiniBand transmits data in packets of up to 4 KB that are taken together to form a message. A message can be: a remote direct memory access read or write a channel send or receive a transaction-based operation (that can be reversed) a multicast transmission an atomic operation === Physical interconnection === In addition to a board form factor connection, it can use both active and passive copper (up to 10 meters) and optical fiber cable (up to 10 km). QSFP connectors are used. The InfiniBand Association also specified the CXP connector system for speeds up to 120 Gbit/s over copper, active optical cables, and optical transceivers using parallel multi-mode fiber cables with 24-fiber MPO connectors. === Software interfaces === Mellanox operating system support is available for Solaris, FreeBSD, Red Hat Enterprise Linux, SUSE Linux Enterprise Server (SLES), Windows, HP-UX, VMware ESX, and AIX. InfiniBand has no specific standard application programming interface (API). The standard only lists a set of verbs such as ibv_open_device or ibv_post_send, which are abstract representations of functions or methods that must exist. The syntax of these functions is left to the vendors. Sometimes for reference this is called the verbs API. The de facto standard software is developed by OpenFabrics Alliance and called the Open Fabrics Enterprise Distribution (OFED). It is released under two licenses GPL2 or BSD license for Linux and FreeBSD, and as Mellanox OFED for Windows (product names: WinOF / WinOF-2; attributed as host controller driver for matching specific ConnectX 3 to 5 devices) under a choice of BSD license for Windows. It has been adopted by most of the InfiniBand vendors, for Linux, FreeBSD, and Microsoft Windows. IBM refers to a software library called libibverbs, for its AIX operating system, as well as "AIX InfiniBand verbs". The Linux kernel support was integrated in 2005 into the kernel version 2.6.11. === Ethernet over InfiniBand === Ethernet over InfiniBand, abbreviated to EoIB, is an Ethernet implementation over the InfiniBand protocol and connector technology. EoIB enables multiple Ethernet bandwidths varying on the InfiniBand (IB) version. Ethernet's implementation of the Internet Protocol Suite, usually referred to as TCP/IP, is different in some details compared to the direct InfiniBand protocol in IP over IB (IPoIB).

    Read more →
  • G.hn

    G.hn

    Gigabit Home Networking (G.hn) is a specification for wired home networking that supports speeds up to 2 Gbit/s and operates over four types of legacy wires: telephone wiring, coaxial cables, power lines and plastic optical fiber. Some benefits of a multi-wire standard are lower equipment development costs and lower deployment costs for service providers (by allowing customer self-install). == History == G.hn was developed under the International Telecommunication Union's Telecommunication Standardization sector (the ITU-T) and promoted by the HomeGrid Forum and several other organizations. ITU-T Recommendation (the ITU's term for standard) G.9960, which received approval on October 9, 2009, specified the physical layers and the architecture of G.hn. The Data Link Layer (Recommendation G.9961) was approved on June 11, 2010. Prominent organizations, including CEPca, HomePNA, and UPA, who were creators of some of these interfaces, rallied behind the latest version of the standard, emphasizing its potential and significance in the home networking domain. Moreover, the ITU-T extended the technology with multiple input, multiple output (MIMO) technology to increase data rates and signaling distance. This new feature was approved in March 2012 under G.9963 Recommendation. The development and promotion of G.hn have been significantly supported by the HomeGrid Forum and several other organizations. The technology was not only designed to address home-networking challenges but also found applications beyond this initial scope, showcasing its versatility and potential in the networking domain. == Technical specifications == === Technical overview === G.hn specifies a single physical layer based on fast Fourier transform (FFT) orthogonal frequency-division multiplexing (OFDM) modulation and low-density parity-check code (LDPC) forward error correction (FEC) code. G.hn includes the capability to notch specific frequency bands to avoid interference with amateur radio bands and other licensed radio services. G.hn includes mechanisms to avoid interference with legacy home networking technologies and also with other wireline systems such as VDSL2 or other types of DSL used to access the home. OFDM systems split the transmitted signal into multiple orthogonal sub-carriers. In G.hn each one of the sub-carriers is modulated using QAM. The maximum QAM constellation supported by G.hn is 4096-QAM (12-bit QAM). The G.hn media access control is based on a time division multiple access (TDMA) architecture, in which a "domain master" schedules Transmission Opportunities (TXOPs) that can be used by one or more devices in the "domain". There are two types of TXOPs: Contention-Free Transmission Opportunities (CFTXOP), which have a fixed duration and are allocated to a specific pair of transmitter and receiver. CFTXOP are used for implementing TDMA Channel Access for specific applications that require quality of service (QoS) guarantees. Shared Transmission Opportunities (STXOP), which are shared among multiple devices in the network. STXOP are divided into Time Slots (TS). There are two types of TS: Contention-Free Time Slots (CFTS), which are used for implementing "implicit" token passing Channel Access. In G.hn, a series of consecutive CFTS is allocated to a number of devices. The allocation is performed by the "domain master" and broadcast to all nodes in the network. There are pre-defined rules that specify which device can transmit after another device has finished using the channel. As all devices know "who is next", there is no need to explicitly send a "token" between devices. The process of "passing the token" is implicit and ensures that there are no collisions during Channel access. Contention-Based Time Slots (CBTS), which are used for implementing CSMA/CARP Channel Access. In general, CSMA systems cannot completely avoid collisions, so CBTS are only useful for applications that do not have strict Quality of Service requirements. ==== Optimization for each medium ==== Although most elements of G.hn are common for all three media supported by the standard (power lines, phone lines and coaxial cable), G.hn includes media-specific optimizations for each media. Some of these media-specific parameters include: OFDM Carrier Spacing: 195.31 kHz in coaxial, 48.82 kHz in phone lines, 24.41 kHz in power lines. FEC Rates: G.hn's FEC can operate with code rates 1/2, 2/3, 5/6, 16/18 and 20/21. Although these rates are not media specific, it is expected that the higher code rates will be used in cleaner media (such as coaxial) while the lower code rates will be used in noisy environments such as power lines. Automatic repeat request (ARQ) mechanisms: G.hn supports operation both with and without ARQ (re-transmission). Although this is not media specific, it is expected that ARQ-less operation is sometimes appropriate for cleaner media (such as coaxial) while ARQ operation is appropriate for noisy environments such as power lines. Power levels and frequency bands: G.hn defines different power masks for each medium. MIMO support: Recommendation G.9963 includes provisions for transmitting G.hn signals over multiple AC wires (phase, neutral, ground), if they are physically available. In July 2016, G.9963 was updated to include MIMO support over twisted pairs. ==== Security ==== G.hn uses the Advanced Encryption Standard (AES) encryption algorithm (with a 128-bit key length) using the CCMP protocol to ensure confidentiality and message integrity. Authentication and key exchange is done following ITU-T Recommendation X.1035. G.hn specifies point-to-point security inside a domain, which means that each pair of transmitter and receiver uses a unique encryption key which is not shared by other devices in the same domain. For example, if node Alice sends data to node Bob, node Eve (in the same domain as Alice and Bob) will not be able to easily eavesdrop their communication. G.hn supports the concept of relays, in which one device can receive a message from one node and deliver it to another node farther away in the same domain. Relaying becomes critical for applications with complex network topologies that need to cover large distances, such as those found in industrial or utility applications. While a relay can read the source and target addresses, it cannot read the message's content due to its body being end-to-end-encrypted. ==== Profiles ==== The G.hn architecture includes the concept of profiles. Profiles are intended to address G.hn nodes with significantly different levels of complexity. In G.hn the higher complexity profiles are proper supersets of lower complexity profiles, so that devices based on different profiles can interoperate with each other. Examples of G.hn devices based on high complexity profiles are Residential Gateways or Set-Top Boxes. Examples of G.hn devices based on low complexity profiles are home automation, home security and smart grid devices. ==== Technical parameters ==== The chart depicts a summary of the crucial technical specifications of the G.hn standard. Many of these technical elements are consistent across different physical media, with variations seen in areas such as Tone Spacing and frequency ranges. This uniformity is essential as it allows silicon manufacturers to produce a singular chip capable of implementing all three media types, leading to cost savings. Presently, G.hn chipsets are compatible with all three media types. This compatibility allows system manufacturers to create devices that can adjust to any wiring type simply by modifying a software configuration in the equipment. === Spectrum === The G.hn spectrum depends on the medium as shown in the diagram below: === Protocol stack === G.hn specifies the physical layer and the data link layer, according to the OSI model. The G.hn Data Link Layer (Recommendation G.9961) is divided into three sub-layers: The Application Protocol Convergence (APC) Layer, which accepts frames (usually in Ethernet format) from the upper layer (Application Entity) and encapsulates them into G.hn APC protocol data units (APDUs). The maximum payload of each APDU is 214 bytes. The logical link control (LLC), which is responsible for encryption, aggregation, segmentation and automatic repeat-request. This sub-layer is also responsible for "relaying" of APDUs between nodes that may not be able to communicate through a direct connection. The medium access control (MAC), which schedules channel access. The G.hn physical layer (Recommendation G.9960) is divided into three sub-layers: The Physical Coding Sub-layer (PCS), responsible for generating PHY headers. The Physical Medium Attachment (PMA), responsible for scrambling and forward error correction coding/decoding. The Physical Medium Dependent (PMD), responsible for bit-loading and OFDM modulation. The interface between the Application Entity and the Data Link Layer is called A-interface. The interface between the Data Link Layer and the ph

    Read more →
  • Computer-aided software engineering

    Computer-aided software engineering

    Computer-aided software engineering (CASE) is a domain of software tools used to design and implement applications. CASE tools are similar to and are partly inspired by computer-aided design (CAD) tools used for designing hardware products. CASE tools are intended to help develop high-quality, defect-free, and maintainable software. CASE software was often associated with methods for the development of information systems together with automated tools that could be used in the software development process. == History == The Information System Design and Optimization System (ISDOS) project, started in 1968 at the University of Michigan, initiated a great deal of interest in the whole concept of using computer systems to help analysts in the very difficult process of analysing requirements and developing systems. Several papers by Daniel Teichroew fired a whole generation of enthusiasts with the potential of automated systems development. His Problem Statement Language / Problem Statement Analyzer (PSL/PSA) tool was a CASE tool although it predated the term. Another major thread emerged as a logical extension to the data dictionary of a database. By extending the range of metadata held, the attributes of an application could be held within a dictionary and used at runtime. This "active dictionary" became the precursor to the more modern model-driven engineering capability. However, the active dictionary did not provide a graphical representation of any of the metadata. It was the linking of the concept of a dictionary holding analysts' metadata, as derived from the use of an integrated set of techniques, together with the graphical representation of such data that gave rise to the earlier versions of CASE. The next entrant into the market was Excelerator from Index Technology in Cambridge, Mass. While DesignAid ran on Convergent Technologies and later Burroughs Ngen networked microcomputers, Index launched Excelerator on the IBM PC/AT platform. While, at the time of launch, and for several years, the IBM platform did not support networking or a centralized database as did the Convergent Technologies or Burroughs machines, the allure of IBM was strong, and Excelerator came to prominence. Hot on the heels of Excelerator were a rash of offerings from companies such as Knowledgeware (James Martin, Fran Tarkenton and Don Addington), Texas Instrument's CA Gen and Andersen Consulting's FOUNDATION toolset (DESIGN/1, INSTALL/1, FCP). CASE tools were at their peak in the early 1990s. According to the PC Magazine of January 1990, over 100 companies were offering nearly 200 different CASE tools. At the time IBM had proposed AD/Cycle, which was an alliance of software vendors centered on IBM's Software repository using IBM DB2 in mainframe and OS/2: The application development tools can be from several sources: from IBM, from vendors, and from the customers themselves. IBM has entered into relationships with Bachman Information Systems, Index Technology Corporation, and Knowledgeware wherein selected products from these vendors will be marketed through an IBM complementary marketing program to provide offerings that will help to achieve complete life-cycle coverage. With the decline of the mainframe, AD/Cycle and the Big CASE tools died off, opening the market for the mainstream CASE tools of today. Many of the leaders of the CASE market of the early 1990s ended up being purchased by Computer Associates, including IEW, IEF, ADW, Cayenne, and Learmonth & Burchett Management Systems (LBMS). The other trend that led to the evolution of CASE tools was the rise of object-oriented methods and tools. Most of the various tool vendors added some support for object-oriented methods and tools. In addition new products arose that were designed from the bottom up to support the object-oriented approach. Andersen developed its project Eagle as an alternative to Foundation. Several of the thought leaders in object-oriented development each developed their own methodology and CASE tool set: Jacobson, Rumbaugh, Booch, etc. Eventually, these diverse tool sets and methods were consolidated via standards led by the Object Management Group (OMG). The OMG's Unified Modelling Language (UML) is currently widely accepted as the industry standard for object-oriented modeling. == CASE software == === Tools === CASE tools support specific tasks in the software development life-cycle. They can be divided into the following categories: Business and analysis modeling: Graphical modeling tools. E.g., E/R modeling, object modeling, etc. Development: Design and construction phases of the life-cycle. Debugging environments. E.g., IISE LKO. Verification and validation: Analyze code and specifications for correctness, performance, etc. Configuration management: Control the check-in and check-out of repository objects and files. E.g., SCCS, IISE. Metrics and measurement: Analyze code for complexity, modularity (e.g., no "go to's"), performance, etc. Project management: Manage project plans, task assignments, scheduling. Another common way to distinguish CASE tools is the distinction between Upper CASE and Lower CASE. Upper CASE Tools support business and analysis modeling. They support traditional diagrammatic languages such as ER diagrams, Data flow diagram, Structure charts, Decision Trees, Decision tables, etc. Lower CASE Tools support development activities, such as physical design, debugging, construction, testing, component integration, maintenance, and reverse engineering. All other activities span the entire life-cycle and apply equally to upper and lower CASE. === Workbenches === Workbenches integrate two or more CASE tools and support specific software-process activities. Hence they achieve: A homogeneous and consistent interface (presentation integration) Seamless integration of tools and toolchains (control and data integration) An example workbench is Microsoft's Visual Basic programming environment. It incorporates several development tools: a GUI builder, a smart code editor, debugger, etc. Most commercial CASE products tended to be such workbenches that seamlessly integrated two or more tools. Workbenches also can be classified in the same manner as tools; as focusing on Analysis, Development, Verification, etc. as well as being focused on the upper case, lower case, or processes such as configuration management that span the complete life-cycle. === Environments === An environment is a collection of CASE tools or workbenches that attempts to support the complete software process. This contrasts with tools that focus on one specific task or a specific part of the life-cycle. CASE environments are classified by Fuggetta as follows: Toolkits: Loosely coupled collections of tools. These typically build on operating system workbenches such as the Unix Programmer's Workbench or the VMS VAX set. They typically perform integration via piping or some other basic mechanism to share data and pass control. The strength of easy integration is also one of the drawbacks. Simple passing of parameters via technologies such as shell scripting can't provide the kind of sophisticated integration that a common repository database can. Fourth generation: These environments are also known as 4GL standing for fourth generation language environments due to the fact that the early environments were designed around specific languages such as Visual Basic. They were the first environments to provide deep integration of multiple tools. Typically these environments were focused on specific types of applications. For example, user-interface driven applications that did standard atomic transactions to a relational database. Examples are Informix 4GL, and Focus. Language-centered: Environments based on a single often object-oriented language such as the Symbolics Lisp Genera environment or VisualWorks Smalltalk from Parcplace. In these environments all the operating system resources were objects in the object-oriented language. This provides powerful debugging and graphical opportunities but the code developed is mostly limited to the specific language. For this reason, these environments were mostly a niche within CASE. Their use was mostly for prototyping and R&D projects. A common core idea for these environments was the model–view–controller user interface that facilitated keeping multiple presentations of the same design consistent with the underlying model. The MVC architecture was adopted by the other types of CASE environments as well as many of the applications that were built with them. Integrated: These environments are an example of what most IT people tend to think of first when they think of CASE. Environments such as IBM's AD/Cycle, Andersen Consulting's FOUNDATION, the ICL CADES system, and DEC Cohesion. These environments attempt to cover the complete life-cycle from analysis to maintenance and provide an integrated database repository for storing all artifacts of the software pr

    Read more →
  • Netomi

    Netomi

    Netomi, formerly msg.ai, is an American artificial intelligence company and developer of chatbot technologies. == History == msg.ai was founded in May 2015 by Puneet Mehta. msg.ai worked with Sony Pictures to launch a chat bot on Facebook Messenger for a $100M film, Goosebumps and subsequently joined Y Combinator as a member of the Winter 2016 class. Later that year and in 2017, msg.ai completed two rounds of seed funding, led by Y Combinator and Index Ventures. In 2018, the company changed its name to Netomi. In 2019, the company raised $14.7 million in a Series A funding round also led by Index Ventures. In 2021, the company raised $30 million in a Series B funding round led by WndrCo LLC.

    Read more →
  • Malleability (cryptography)

    Malleability (cryptography)

    Malleability is a property of some cryptographic algorithms. An encryption algorithm is said to be malleable if it is possible to transform a ciphertext into another ciphertext which decrypts to a related plaintext. That is, given an encryption of a plaintext m {\displaystyle m} , it is possible to generate another ciphertext which decrypts to f ( m ) {\displaystyle f(m)} , for a known function f {\displaystyle f} , without necessarily knowing or learning m {\displaystyle m} . Malleability is often an undesirable property in a general-purpose cryptosystem, since it allows an attacker to modify the contents of a message. For example, suppose that a bank uses a stream cipher to hide its financial information, and a user sends an encrypted message containing, say, "TRANSFER $0000100.00 TO ACCOUNT #199." If an attacker can modify the message on the wire, and can guess the format of the unencrypted message, the attacker could change the amount of the transaction, or the recipient of the funds, e.g. "TRANSFER $0100000.00 TO ACCOUNT #227". Malleability does not refer to the attacker's ability to read the encrypted message. Both before and after tampering, the attacker cannot read the encrypted message. On the other hand, some cryptosystems are malleable by design. In other words, in some circumstances it may be viewed as a feature that anyone can transform an encryption of m {\displaystyle m} into a valid encryption of f ( m ) {\displaystyle f(m)} (for some restricted class of functions f {\displaystyle f} ) without necessarily learning m {\displaystyle m} . Such schemes are known as homomorphic encryption schemes. A cryptosystem may be semantically secure against chosen-plaintext attacks or even non-adaptive chosen-ciphertext attacks (CCA1) while still being malleable. However, security against adaptive chosen-ciphertext attacks (CCA2) is equivalent to non-malleability. == Example malleable cryptosystems == In a stream cipher, the ciphertext is produced by taking the exclusive or of the plaintext and a pseudorandom stream based on a secret key k {\displaystyle k} , as E ( m ) = m ⊕ S ( k ) {\displaystyle E(m)=m\oplus S(k)} . An adversary can construct an encryption of m ⊕ t {\displaystyle m\oplus t} for any t {\displaystyle t} , as E ( m ) ⊕ t = m ⊕ t ⊕ S ( k ) = E ( m ⊕ t ) {\displaystyle E(m)\oplus t=m\oplus t\oplus S(k)=E(m\oplus t)} . In the RSA cryptosystem, a plaintext m {\displaystyle m} is encrypted as E ( m ) = m e mod n {\displaystyle E(m)=m^{e}{\bmod {n}}} , where ( e , n ) {\displaystyle (e,n)} is the public key. Given such a ciphertext, an adversary can construct an encryption of m t {\displaystyle mt} for any t {\displaystyle t} , as E ( m ) ⋅ t e mod n = ( m t ) e mod n = E ( m t ) {\textstyle E(m)\cdot t^{e}{\bmod {n}}=(mt)^{e}{\bmod {n}}=E(mt)} . For this reason, RSA is commonly used together with padding methods such as OAEP or PKCS1. In the ElGamal cryptosystem, a plaintext m {\displaystyle m} is encrypted as E ( m ) = ( g b , m A b ) {\displaystyle E(m)=(g^{b},mA^{b})} , where ( g , A ) {\displaystyle (g,A)} is the public key. Given such a ciphertext ( c 1 , c 2 ) {\displaystyle (c_{1},c_{2})} , an adversary can compute ( c 1 , t ⋅ c 2 ) {\displaystyle (c_{1},t\cdot c_{2})} , which is a valid encryption of t m {\displaystyle tm} , for any t {\displaystyle t} . In contrast, the Cramer-Shoup system (which is based on ElGamal) is not malleable. In the Paillier, ElGamal, and RSA cryptosystems, it is also possible to combine several ciphertexts together in a useful way to produce a related ciphertext. In Paillier, given only the public key and an encryption of m 1 {\displaystyle m_{1}} and m 2 {\displaystyle m_{2}} , one can compute a valid encryption of their sum m 1 + m 2 {\displaystyle m_{1}+m_{2}} . In ElGamal and in RSA, one can combine encryptions of m 1 {\displaystyle m_{1}} and m 2 {\displaystyle m_{2}} to obtain a valid encryption of their product m 1 m 2 {\displaystyle m_{1}m_{2}} . Block ciphers in the cipher block chaining mode of operation, for example, are partly malleable: flipping a bit in a ciphertext block will completely mangle the plaintext it decrypts to, but will result in the same bit being flipped in the plaintext of the next block. This allows an attacker to 'sacrifice' one block of plaintext in order to change some data in the next one, possibly managing to maliciously alter the message. This is essentially the core idea of the padding oracle attack on CBC, which allows the attacker to decrypt almost an entire ciphertext without knowing the key. For this and many other reasons, a message authentication code is required to guard against any method of tampering. == Complete non-malleability == Fischlin, in 2005, defined the notion of complete non-malleability as the ability of the system to remain non-malleable while giving the adversary additional power to choose a new public key which could be a function of the original public key. In other words, the adversary shouldn't be able to come up with a ciphertext whose underlying plaintext is related to the original message through a relation that also takes public keys into account.

    Read more →
  • Media intelligence

    Media intelligence

    Media intelligence uses data mining and data science to analyze public, social and editorial media content. It refers to marketing systems that synthesize billions of online conversations into relevant information. This allow organizations to measure and manage content performance, understand trends, and drive communications and business strategy. Media intelligence can include software as a service using big data terminology. This includes questions about messaging efficiency, share of voice, audience geographical distribution, message amplification, influencer strategy, journalist outreach, creative resonance, and competitor performance in all these areas. Media intelligence differs from business intelligence in that it uses and analyzes data outside company firewalls. Examples of that data are user-generated content on social media sites, blogs, comment fields, and wikis etc. It may also include other public data sources like press releases, news, blogs, legal filings, reviews and job postings. Media intelligence may also include competitive intelligence, wherein information that is gathered from publicly available sources such as social media, press releases, and news announcements are used to better understand the strategies and tactics being deployed by competing businesses. Media intelligence is enhanced by means of emerging technologies like ambient intelligence, machine learning, semantic tagging, natural language processing, sentiment analysis and machine translation. == Technologies used == Different media intelligence platforms use different technologies for monitoring, curating content, engaging with content, data analysis and measurement of communications and marketing campaign success. These technology providers may obtain content by scraping content directly from websites or by connecting to the API provided by social media, or other content platforms that are created for 3rd party developers to develop their own applications and services that access data. Technology companies may also get data from a data reseller. Some social media monitoring and analytics companies use calls to data providers each time an end-user develops a query. Others archive and index social media posts to provide end users with on-demand access to historical data and enable methodologies and technologies leveraging network and relational data. Additional monitoring companies use crawlers and spidering technology to find keyword references, known as semantic analysis or natural language processing. Basic implementation involves curating data from social media on a large scale and analyzing the results to make sense out of it.

    Read more →