AI For Business Brian Hanson

AI For Business Brian Hanson — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Comparison of color models in computer graphics

  This article provides introductory information about the RGB, HSV, and HSL color models from a computer graphics (web pages, images) perspective. An introduction to colors is also provided to support the main discussion. == Basics of color == === Primary colors and hue === First, "color" refers to the human brain's subjective interpretation of combinations of a narrow band of wavelengths of light. For this reason, the definition of "color" is not based on a strict set of physical phenomena. Therefore, even basic concepts like "primary colors" are not clearly defined. For example, traditional "Painter's Colors" use red, blue, and yellow as the primary colors, "Printer's Colors" use cyan, yellow, and magenta, and "Light Colors" use red, green, and blue. "Light colors", more formally known as additive colors, are formed by combining red, green, and blue light. This article refers to additive colors and refers to red, green, and blue as the primary colors. Hue is a term describing a pure color, that is, a color not modified by tinting or shading (see below). In additive colors, hues are formed by combining two primary colors. When two primary colors are combined in equal intensities, the result is a "secondary color". === Color wheel === A color wheel is a tool that provides a visual representation of the relationships between all possible hues. The primary colors are arranged around a circle at equal (120 degree) intervals. (Warning: Color wheels frequently depict "Painter's Colors" primary colors, which leads to a different set of hues than additive colors.) The illustration shows a simple color wheel based on the additive colors. Note that the position (top, right) of the starting color, typically red, is arbitrary, as is the order of green and blue (clockwise, counter-clockwise). The illustration also shows the secondary colors, yellow, cyan, and magenta, located halfway between (60 degrees) the primary colors. == Complementary color == The complement of a hue is the hue that is opposite it (180 degrees) on the color wheel. Using additive colors, mixing a hue and its complement in equal amounts produces white. === Tints and shades === The following discussion uses an illustration involving three projectors pointing to the same spot on a screen. Each projector is capable of generating one hue. The "intensities" of each projector are "matched" and can be equally adjusted from zero to full. (Note: "Intensity" is used here in the same sense as the RGB color model. The subject of matching, or "gamma correction", is beyond the level of this article.) A shade is produced by "dimming" a maximum chroma color. Painters refer to this as "adding black". In our illustration, one projector is set to full intensity, a second is set to some intensity between zero and full, and third is set to zero. "Dimming" is accomplished by decreasing each projector's intensity setting to the same fraction of its start setting. In the shade example, with any fully shaded hue, that all three projectors are set to zero intensity, resulting in black. A tint is produced by "lightening" a maximum chroma color. Painters refer to this as "adding white". In our illustration, one projector is set to full intensity, a second is set to some intensity between zero and full, and third is set to zero. "Lightening" is accomplished by increasing each projector's intensity setting by the same fraction from its start setting to full. In the tinting example, note that the third projector is now contributing. When the hue is fully lightened, all three projectors are each at full intensity, and the result is white. Note an attribute of the total intensity in the additive model. If full intensity for one projector is 1, then a primary color has a combined intensity of 1. A secondary color has a total intensity of 2. White has a total intensity of 3. Tinting, or "adding white", increases the total intensity of the hue. While this is simply a fact, the HSL model will take this fact into account in its design. === Tones === Tone is a general term, typically used by painters, to refer to the effects of reducing the "colorfulness" of a maximum chroma color; painters refer to it as "adding gray". Note that gray is not a color or even a single concept but refers to all the range of values between black and white where all three primary colors are equally represented. The general term is provided as more specific terms have conflicting definitions in different color models. Thus, shading takes a hue toward black, tinting takes a hue towards white, and tones cover the range between. == Choosing a color model == No one color model is necessarily "better" than another. Typically, the choice of a color model is dictated by external factors, such as a graphics tool or the need to specify colors according to the CSS2 or CSS3 standard. The following discussion only describes how the models function, centered on the concepts of hue, shade, tint, and tone. === RGB === The RGB model's approach to colors is important because: It directly reflects the physical properties of "Truecolor" displays As of 2011, most graphic cards define pixel values in terms of the colors red, green, and blue. The typical range of intensity values for each color, 0–255, is based on taking a binary number with 32 bits and breaking it up into four bytes of 8 bits each. 8 bits can hold a value from 0 to 255. The fourth byte is used to specify the "alpha", or the opacity, of the color. Opacity comes into play when layers with different colors are stacked. If the color in the top layer is less than fully opaque (alpha < 255), the color from underlying layers "shows through". In the RGB model, hues are represented by specifying one color as full intensity (255), a second color with a variable intensity, and the third color with no intensity (0). The following provides some examples using red as the full-intensity and green as the partial-intensity colors; blue is always zero: Shades are created by multiplying the intensity of each primary color by 1 minus the shade factor, in the range 0 to 1. A shade factor of 0 does nothing to the hue, a shade factor of 1 produces black: new intensity = current intensity (1 – shade factor) The following provides examples using orange: Tints are created by modifying each primary color as follows: the intensity is increased so that the difference between the intensity and full intensity (255) is decreased by the tint factor, in the range 0 to 1. A tint factor of 0 does nothing, a tint factor of 1 produces white: new intensity = current intensity + (255 – current intensity) tint factor The following provides examples using orange: Tones are created by applying both a shade and a tint. The order in which the two operations are performed does not matter, with the following restriction: when a tint operation is performed on a shade, the intensity of the dominant color becomes the "full intensity"; that is, the intensity value of the dominant color must be used in place of 255. The following provides examples using orange: === HSV === The HSV, or HSB, model describes colors in terms of hue, saturation, and value (brightness). Note that the range of values for each attribute is arbitrarily defined by various tools or standards. Be sure to determine the value ranges before attempting to interpret a value. Hue corresponds directly to the concept of hue in the Color Basics section. The advantages of using hue are The angular relationship between tones around the color circle is easily identified Shades, tints, and tones can be generated easily without affecting the hue Saturation corresponds directly to the concept of tint in the Color Basics section, except that full saturation produces no tint, while zero saturation produces white, a shade of gray, or black. Value corresponds directly to the concept of intensity in the Color Basics section. Pure colors are produced by specifying a hue with full saturation and value Shades are produced by specifying a hue with full saturation and less than full value Tints are produced by specifying a hue with less than full saturation and full value Tones are produced by specifying a hue and both less than full saturation and value White is produced by specifying zero saturation and full value, regardless of hue Black is produced by specifying zero value, regardless of hue or saturation Shades of gray are produced by specifying zero saturation and between zero and full value The advantage of HSV is that each of its attributes corresponds directly to the basic color concepts, which makes it conceptually simple. The perceived disadvantage of HSV is that the saturation attribute corresponds to tinting, so desaturated colors have increasing total intensity. For this reason, the CSS3 standard plans to support RGB and HSL but not HSV. === HSL === The HSL model describes colors in terms of hue, saturation, and lightness (also called luminance). (Note: the definition of sa

  Read more →
• 

  CrocBITE

  CrocBITE (currently CrocAttack) was an online database of wild crocodilian attacks reported on humans in the world. The non-profit online research tool helped to scientifically analyze crocodilian behavior via complex models. Users were encouraged to feed information in a crowdsourcing manner. This website excludes captive crocodilian attacks, as well as non-fatal bites on professional handlers, rangers, staff, or researchers, and crocodilian attacks on pets and livestock, because its primary goal is to analyze natural human-crocodilian conflict in the wild for conservation and management purposes, and that these incidents do are not considered indicative of natural species behavior or typical human-wildlife conflict, as well as not providing enough useful data and helping researchers understand wild population behavior or typical human-wildlife conflict dynamics and helps create safety strategies for people living or working near wild crocodilians, rather than tracking workplace accidents in zoos or farms. While fatal incidents involving handlers are sometimes included on the website, typical captive incidents (such as handlers being bitten by them in zoos) are excluded because they are considered manageable professional risks rather than general public safety threats. == About == The online database was established in 2013 (2013) by Dr Adam Britton, a researcher at Charles Darwin University, his student Brandon Sideleau and Erin Britton. It was a compilation of government records, individual reports, registered contributors and historical data. Dr Simon Pooley, Junior Research fellow, Imperial College London joined hands to further the studies. The collaboration culminated when Dr Pooley met Dr Britton at the IUCN Crocodile Specialist Group, in Louisiana in 2014. The program received funds from Economic and Social Research Council, United Kingdom to the tune of A$30,000 and unspecified resourced plus amount from Big Gecko Crocodilian Research, Crocodillian.com and Charles Darwin University. The research yielded pertinent observations that provide inside into crocodile attacks. It was observed that most attacks on humans occur from bites of Saltwater crocodile as against the popular understanding of Nile crocodiles taking the top spot. This is not, however, believed to be the actual case, as most attacks by the Nile crocodile are believed to go unreported or only reported on a local level. The broad category of Nile crocodile attacks were segmented into West African crocodile and Crocodylus niloticus (the Nile Crocodile) species to get a clear understanding of their respective attack zones. The objective was that the information would be used by communities and conservation managers to help inform and educate people about how to keep safe. The information was vital for Australia and Africa where such attacks are more likely than in other parts of the world. This was the only database of its kind with such comprehensive collection of information made available online. The database is no longer online, and its founder Adam Britton is in custody having pleaded guilty to charges of bestiality on September 25, 2023. It has been rebranded and renamed CrocAttack, and serves as a updated database focusing on human-crocodilian conflict and records over 8,500 incidents from the past decades.

  Read more →
• 

  Graphics address remapping table

  The graphics address remapping table (GART), also known as the graphics aperture remapping table, or graphics translation table (GTT), is an I/O memory management unit (IOMMU) used by Accelerated Graphics Port (AGP) and PCI Express (PCIe) graphics cards. The GART allows the graphics card direct memory access (DMA) to the host system memory, through which buffers of textures, polygon meshes and other data are loaded. AMD later reused the same mechanism for I/O virtualization with other peripherals including disk controllers and network adapters. A GART is used as a means of data exchange between the main memory and video memory through which buffers (i.e. paging/swapping) of textures, polygon meshes and other data are loaded, but can also be used to expand the amount of video memory available for systems with only integrated or shared graphics (i.e. no discrete or inbuilt graphics processor), such as Intel HD Graphics processors. However, this type of memory (expansion) remapping has a caveat that affects the entire system: specifically, any GART, pre-allocated memory becomes pooled and cannot be utilised for any other purposes but graphics memory and display rendering. Since PCI Express, the GART is extended to the GTT (Graphics Translation Table), which act as a buffer or cache between system memory and graphics card, and in PCI Express, the GTT buffer size is changeable by the GPU driver. == Operating system support == === Windows === Support for AGP GART was added since Windows 95 OSR2. Later, support for GTT was added since Windows XP SP2 and Windows Vista. === Linux === Jeff Hartmann served as the primary maintainer of the Linux kernel's agpgart driver, which began as part of Brian Paul's Utah GLX accelerated Mesa 3D driver project. The developers primarily targeted Linux 2.4.x kernels, but made patches available against older 2.2.x kernels. Dave Jones heavily reworked agpgart for the Linux 2.6.x kernels, along with more contributions from Jeff Hartmann. === FreeBSD === In FreeBSD, the agpgart driver appeared in its 4.1 release. === Solaris === AGPgart support was introduced into Solaris Express Developer Edition as of its 7/05 release.

  Read more →
• 

  Magiran

  Magiran (Persian: مگیران)—Iran's publications database—is a digital library that was founded in 2000 and includes digitized versions of scientific journals, which currently provides the possibility of searching among the full text of 1,500 journals. Registration is required for full access to the database, but access to some items such as newspapers is also possible without registration. A list of Iranian researchers is also maintained there.

  Read more →
• 

  Turret lathe

  A turret lathe is a form of metalworking lathe that is used for repetitive production of duplicate parts, which by the nature of their cutting process are usually interchangeable. It evolved from earlier lathes with the addition of the turret, which is an indexable toolholder that allows multiple cutting operations to be performed, each with a different cutting tool, in easy, rapid succession, with no need for the operator to perform set-up tasks in between (such as installing or uninstalling tools) or to control the toolpath. The latter is due to the toolpath's being controlled by the machine, either in jig-like fashion, via the mechanical limits placed on it by the turret's slide and stops, or via digitally-directed servomechanisms for computer numerical control lathes. The name derives from the way early turrets took the general form of a flattened cylindrical block mounted to the lathe's cross-slide, capable of rotating about the vertical axis and with toolholders projecting out to all sides, and thus vaguely resembled a swiveling gun turret. Capstan lathe is the usual name in the UK and Commonwealth, though the two terms are also used in contrast: see below, Capstan versus turret. == History == Turret lathes became indispensable to the production of interchangeable parts and for mass production. The first turret lathe was built by Stephen Fitch in 1845 to manufacture screws for pistol percussion parts. In the mid-nineteenth century, the need for interchangeable parts for Colt revolvers enhanced the role of turret lathes in achieving this goal as part of the "American system" of manufacturing arms. Clock-making and bicycle manufacturing had similar requirements. Christopher Spencer invented the first fully automated turret lathe in 1873, which led to designs using cam action or hydraulic mechanisms. From the late-19th through mid-20th centuries, turret lathes, both manual and automatic (i.e., screw machines and chuckers), were one of the most important classes of machine tools for mass production. They were used extensively in the mass production for the war effort in World War II. The U.S. company Warner & Swasey was one of the premier brands in heavy turret lathes between the 1910s and 1960s; it became the world's largest manufacturer of such lathes by 1928. During World War II, it employed 7,000 people and produced half of the turret lathes manufactured in the United States. == Types == There are many variants of the turret lathe. They can be most generally classified by size (small, medium, or large); method of control (manual, automated mechanically, or automated via computer (numerical control (NC) or computer numerical control (CNC)); and bed orientation (horizontal or vertical). === Archetypical: horizontal, manual === In the late 1830s a "capstan lathe" with a turret was patented in Britain. The first American turret lathe was invented by Stephen Fitch in 1845. The archetypical turret lathe, and the first in order of historical appearance, is the horizontal-bed, manual turret lathe. The term "turret lathe" without further qualification is still understood to refer to this type. The formative decades for this class of machine were the 1840s through 1860s, when the basic idea of mounting an indexable turret on a bench lathe or engine lathe was born, developed, and disseminated from the originating shops to many other factories. Some important tool-builders in this development were Stephen Fitch; Gay, Silver & Co.; Elisha K. Root of Colt; J.D. Alvord of the Sharps Armory; Frederick W. Howe, Richard S. Lawrence, and Henry D. Stone of Robbins & Lawrence; J.R. Brown of Brown & Sharpe; and Francis A. Pratt of Pratt & Whitney. Various designers at these and other firms later made further refinements. === Semi-automatic === Sometimes machines similar to those above, but with power feeds and automatic turret-indexing at the end of the return stroke, are called "semi-automatic turret lathes". This nomenclature distinction is blurry and not consistently observed. The term "turret lathe" encompasses them all. During the 1860s, when semi-automatic turret lathes were developed, they were sometimes called "automatic". What we today would call "automatics", that is, fully automatic machines, had not been developed yet. During that era both manual and semi-automatic turret lathes were sometimes called "screw machines", although we today reserve that term for fully automatic machines. === Automatic === During the 1870s through 1890s, the mechanically automated "automatic" turret lathe was developed and disseminated. These machines can execute many part-cutting cycles without human intervention. Thus the duties of the operator, which were already greatly reduced by the manual turret lathe, were even further reduced, and productivity increased. These machines use cams to automate the sliding and indexing of the turret and the opening and closing of the chuck. Thus, they execute the part-cutting cycle somewhat analogously to the way in which an elaborate cuckoo clock performs an automated theater show. Small- to medium-sized automatic turret lathes are usually called "screw machines" or "automatic screw machines", while larger ones are usually called "automatic chucking lathes", "automatic chuckers", or "chuckers". Such machine tools of the "automatic" variety, which in the pre-computer era meant mechanically automated, had already reached a highly advanced state by World War I. === Computer numerical control === When World War II ended, the digital computer was poised to develop from a colossal laboratory curiosity into a practical technology that could begin to disseminate into business and industry. The advent of computer-based automation in machine tools via numerical control (NC) and then computer numerical control (CNC) displaced to a large extent, but not at all completely, the previously existing manual and mechanically automated machines. Numerically controlled turrets allow automated selection of tools on a turret. CNC lathes may be horizontal or vertical in orientation and mount six separate tools on one or more turrets. Such machine tools can work in two axes per turret, with up to six axes being feasible for complex work. === Vertical === Vertical turret lathes have the workpiece held vertically, which allows the headstock to sit on the floor and the faceplate to become a horizontal rotating table, analogous to a huge potter's wheel. This is useful for the handling of very large, heavy, short workpieces. Vertical lathes in general are also called "vertical boring mills" or often simply "boring mills"; therefore a vertical turret lathe is a vertical boring mill equipped with a turret. == Other variations == === Capstan versus turret === The term "capstan lathe" overlaps in sense with the term "turret lathe" to a large extent. In many times and places, it has been understood to be synonymous with "turret lathe". In other times and places it has been held in technical contradistinction to "turret lathe", with the difference being in whether the turret's slide is fixed to the bed (ram-type turret) or slides on the bed's ways (saddle-type turret). The difference in terminology is mostly a matter of United Kingdom and Commonwealth usage versus United States usage. === Flat === A subtype of horizontal turret lathe is the flat-turret lathe. Its turret is flat (and analogous to a rotary table), allowing the turret to pass beneath the part. Patented by James Hartness of Jones & Lamson, and first disseminated in the 1890s, it was developed to provide more rigidity via requiring less overhang in the tool setup, especially when the part is relatively long. === Hollow-hexagon === Hollow-hexagon turret lathes competed with flat-turret lathes by taking the conventional hexagon turret and making it hollow, allowing the part to pass into it during the cut, analogously to how the part would pass over the flat turret. In both cases, the main idea is to increase rigidity by allowing a relatively long part to be turned without the tool overhang that would be needed with a conventional turret, which is not flat or hollow. === Monitor lathe === The term "monitor lathe" formerly (1860s–1940s) referred to the class of small- to medium-sized manual turret lathes used on relatively small work. The name was inspired by the monitor-class warships, which the monitor lathe's turret resembled. Today, lathes of such appearance, such as the Hardinge DSM-59 and its many clones, are still common, but the name "monitor lathe" is no longer current in the industry. === Toolpost turrets and tailstock turrets === Turrets can be added to non-turret lathes (bench lathes, engine lathes, toolroom lathes, etc.) by mounting them on the toolpost, tailstock, or both. Often these turrets are not as large as a turret lathe's, and they usually do not offer the sliding and stopping that a turret lathe's turret does; but they do offer the ability to index through successive tool

  Read more →
• 

  WebGPU Shading Language

  WebGPU Shading Language (WGSL, internet media type: text/wgsl) is a high-level shading language and the normative shader language for the WebGPU API on the web. WGSL's syntax is influenced by Rust and is designed with strong static validation, explicit resource binding, and portability in mind for secure execution in browsers. In web contexts, WebGPU implementations accept WGSL source and perform compilation to platform-specific intermediate forms (for example, to SPIR‑V, DXIL, or MSL via the user agent), but such backends are not exposed to web content. == History and background == Graphics on the web historically used WebGL, with shaders written in GLSL ES. As applications demanded more modern GPU features and finer control over compute and graphics pipelines, the W3C's GPU for the Web Community Group and Working Group created WebGPU and its companion shading language, WGSL, to provide a secure, portable model suitable for the web platform. WGSL was developed to be human-readable, avoid undefined behavior common in legacy shading languages, and align closely with WebGPU's resource and validation model. == Design goals == WGSL's design emphasizes: Safety and determinism suitable for web security constraints (extensive static validation and well-defined semantics). Portability across diverse GPU backends via an abstract resource model shared with WebGPU. Readability and explicitness (no preprocessor, minimal implicit conversions, explicit address spaces and bindings). Alignment with modern GPU features (compute, storage buffers, textures, atomics) while retaining a familiar C/Rust-like syntax. == Language overview == === Types and values === Core scalar types include bool, i32, u32, and f32. Vectors (e.g., vec2, vec3, vec4) and matrices (up to 4×4) are available for floating-point element types. Optional f16 (half precision) may be enabled via a WebGPU feature; availability is implementation-dependent. Atomic types (atomic, atomic) support limited atomic operations in qualified address spaces. === Variables and address spaces === Variables are declared with let (immutable), var (mutable), or const (compile-time constant). Storage classes (address spaces) include function, private, workgroup, uniform, and storage with read or read_write access as applicable. WGSL defines explicit layout and alignment rules; attributes such as @align, @size, and @stride control data layout for buffer interoperability. === Functions and control flow === Functions use explicit parameter and return types. Control flow includes if, switch, for, while, and loop constructs, with break/continue. Recursion is disallowed; entry-point call graphs must be acyclic. === Entry points and attributes === Shaders define stage entry points with @vertex, @fragment, or @compute. Attributes annotate bindings and interfaces, including @group, @binding (resource binding), @location (user-defined I/O), @builtin (stage built-ins such as position or global_invocation_id), @interpolate, and @workgroup_size. === Resources === WGSL exposes buffers (uniform, storage), textures (sampled, storage, and multisampled variants), and samplers (filtering/non-filtering/comparison). The binding model is explicit via descriptor sets called groups and bindings, matching WebGPU's pipeline layout model. == Compilation and validation == Browsers compile WGSL to platform-appropriate representations and native driver formats; the specific compilation pipeline is not observable by web content. WGSL source undergoes strict parsing and static validation, and WebGPU enforces robust resource access rules to avoid out-of-bounds memory hazards, contributing to predictable behavior across implementations. == Shader stages == WGSL supports three pipeline stages: vertex, fragment, and compute. === Vertex shaders === Vertex shaders transform per-vertex inputs and produce values for rasterization, including a clip-space position written to the position builtin. ==== Example ==== === Fragment shaders === Fragment shaders run per-fragment and compute color (and optionally depth) outputs written to color attachments. ==== Example ==== If half-precision (vec4h, shorthand for vec4) is desired, the code must be prefaced with a enable f16; statement. === Compute shaders === Compute shaders run in workgroups and are used for general-purpose GPU computations. ==== Example ==== == Differences from GLSL and HLSL == Compared with legacy shading languages, WGSL: Omits a preprocessor and requires explicit types and conversions. Uses explicit address spaces and binding annotations aligned with WebGPU's model. Enforces strict validation to avoid undefined behavior common in other shading languages. Defines a portable, web-focused feature set; 16-bit types and other features are opt-in and may depend on device capabilities.

  Read more →
• 

  Multi-model database

  In the field of database design, a multi-model database is a database management system designed to support multiple data models against a single, integrated backend. In contrast, most database management systems are organized around a single data model that determines how data can be organized, stored, and manipulated. Document, graph, relational, and key–value models are examples of data models that may be supported by a multi-model database. == Background == The relational data model became popular after its publication by Edgar F. Codd in 1970. Due to increasing requirements for horizontal scalability and fault tolerance, NoSQL databases became prominent after 2009. NoSQL databases use a variety of data models, with document, graph, and key–value models being popular. A multi-model database is a database that can store, index and query data in more than one model. For some time, databases have primarily supported only one model, such as: relational database, document-oriented database, graph database or triplestore. A database that combines many of these is multi-model. This should not be confused with multimodal database systems such as Pixeltable or ApertureDB, which focus on unified management of different media types (images, video, audio, text) rather than different data models. For some time, it was all but forgotten (or considered irrelevant) that there were any other database models besides relational. The relational model and notion of third normal form were the default standard for all data storage. However, prior to the dominance of relational data modeling, from about 1980 to 2005, the hierarchical database model was commonly used. Since 2000 or 2010, many NoSQL models that are non-relational, including documents, triples, key–value stores and graphs are popular. Arguably, geospatial data, temporal data, and text data are also separate models, though indexed, queryable text data is generally termed a "search engine" rather than a database. The first time the word "multi-model" has been associated to the databases was on May 30, 2012 in Cologne, Germany, during the Luca Garulli's key note "NoSQL Adoption – What’s the Next Step?". Luca Garulli envisioned the evolution of the 1st generation NoSQL products into new products with more features able to be used by multiple use cases. The idea of multi-model databases can be traced back to Object–Relational Data Management Systems (ORDBMS) in the early 1990s and in a more broader scope even to federated and integrated DBMSs in the early 1980s. An ORDBMS system manages different types of data such as relational, object, text and spatial by plugging domain specific data types, functions and index implementations into the DBMS kernels. A multi-model database is most directly a response to the "polyglot persistence" approach of knitting together multiple database products, each handing a different model, to achieve a multi-model capability as described by Martin Fowler. This strategy has two major disadvantages: it leads to a significant increase in operational complexity, and there is no support for maintaining data consistency across the separate data stores, so multi-model databases have begun to fill in this gap. Multi-model databases are intended to offer the data modeling advantages of polyglot persistence, without its disadvantages. Operational complexity, in particular, is reduced through the use of a single data store. == Benchmarking multi-model databases == As more and more platforms are proposed to deal with multi-model data, there are a few works on benchmarking multi-model databases. For instance, Pluciennik, Oliveira, and UniBench reviewed existing multi-model databases and made an evaluation effort towards comparing multi-model databases and other SQL and NoSQL databases respectively. They pointed out that the advantages of multi-model databases over single-model databases are as follows : == Architecture == The main difference between the available multi-model databases is related to their architectures. Multi-model databases can support different models either within the engine or via different layers on top of the engine. Some products may provide an engine which supports documents and graphs while others provide layers on top of a key-key store. With a layered architecture, each data model is provided via its own component. == User-defined data models == In addition to offering multiple data models in a single data store, some databases allow developers to easily define custom data models. This capability is enabled by ACID transactions with high performance and scalability. In order for a custom data model to support concurrent updates, the database must be able to synchronize updates across multiple keys. ACID transactions, if they are sufficiently performant, allow such synchronization. JSON documents, graphs, and relational tables can all be implemented in a manner that inherits the horizontal scalability and fault-tolerance of the underlying data store. == Theoretical Foundation for Multi-Model Databases == The traditional theory of relations is not enough to accurately describe multi-model database systems. Recent research is focused on developing a new theoretical foundation for these systems. Category theory can provide a unified, rigorous language for modeling, integrating, and transforming different data models. By representing multi-model data as sets and their relationships as functions or relations within the Set category, we can create a formal framework to describe, manipulate, and understand various data models and how they interact.

  Read more →
• 

  No Thanks (app)

  No Thanks is a Palestinian boycott-awareness mobile application developed by Palestinian software engineer Ahmed Bashbash, created to assist consumers in identifying and boycotting products associated with companies linked to Israel. Launched in 13 November 2023, the app gained significant attention amid the Gaza–Israel conflict. == History == No Thanks is a mobile application developed by Ahmed Bashbash, a Palestinian software engineer from Gaza residing in Hungary. The app was conceived in October 2023 following the death of Bashbash's brother in an Israeli airstrike on October 31, 2023. His sister had previously died in 2020 due to delayed medical treatment. The app was officially launched on November 13, 2023, and quickly gained traction, got over 100,000 downloads within its first month of release. On November 30, 2023, Google removed the app from its Play Store due to a violation of its content policies. The app's home page included a description: "Welcome to No Thanks, here you can see if the product in your hand supports killing children in Palestine or not," which was deemed to contravene Google's guidelines on hate speech and sensitive content. On December 3, 2023, following changes to the app's description, Google reinstated the app.

  Read more →
• 

  Deluxe Paint

  Deluxe Paint, often referred to as DPaint, is a bitmap graphics editor created by Dan Silva for Electronic Arts and published for the then-new Amiga 1000 in November 1985. A series of updated versions followed, some of which were ported to other platforms. An MS-DOS release with support for the 256 color VGA standard became popular for creating pixel graphics in video games in the 1990s. Author Dan Silva previously worked on the Cut & Paste word processor (1984), also from Electronic Arts. == History == Deluxe Paint began as an in-house art development tool called Prism. As author Dan Silva added features to Prism, it was developed as a showcase product to coincide with the Amiga's debut in 1985. Upon release, it was quickly embraced by the Amiga community and became the de facto graphics (and later animation) editor for the platform. Amiga manufacturer Commodore International later commissioned EA to create version 4.5 AGA to bundle with the new Advanced Graphics Architecture chipset (A1200, A4000) capable Amigas. Version 5 was the last release after Commodore's bankruptcy in 1994. Early versions of Deluxe Paint were available in protected and non copy-protected versions, the latter retailing for a slightly higher price. The copy protection scheme was later dropped. Deluxe Paint was first in a series of products from the Electronic Arts Tools group—then later moved to the ICE (for Interactivity, Creativity, and Education) group—which included such Amiga programs as Deluxe Music Construction Set (preceded by Music Construction Set for the Apple II), Deluxe Video, and the Studio series of paint programs for the Mac. With the development of Deluxe Paint, EA introduced the ILBM and ANIM file format standards for graphics. While widely used on the Amiga, these formats never gained widespread end user acceptance on other platforms, but were heavily used by game development companies. Deluxe Paint was used by LucasArts to make graphics for their adventure games such as The Secret of Monkey Island, and the name of a particular filename used to store the main protagonist Guybrush Threepwood was probably at the origin of his peculiar name. One of the main artist developer of the game, Mark Ferrari, in an interview for The Making of Monkey Island 30th Anniversary Documentary remembers that "there was a pulldown menu in DPaint called brushes, so character sprites were referred to as brushes", and the male protagonist was simply "the guy.brush" until the artist Steve Purcell suggested to take the very name "Guybrush". The author Ron Gilbert remembers that the PC DOS version of the file was named "guybrush.bbm". == Versions == === Amiga === Deluxe Paint I was released in 1985. A major feature was animation by using color cycling. The Amiga natively supports indexed color, where a pixel's color value does not carry any RGB hue information but instead is an index to a color palette (a collection of unique color values). By adjusting the color value in the palette, all pixels with that palette value change simultaneously in the image or animation, creating cyclic movement in the image. In the Christmas demo files on the Deluxe Paint I disk, this kind of animation (which is toggled by pressing the tab key) is used to depict falling snowflakes, a blinking Christmas tree, and a roaring fire in the fireplace. In 1986, Deluxe Paint II was introduced, which added many convenient features such as pattern and gradient fill, which could be selected by right-clicking on a fill tool. An effects menu with e.g. perspective transformation was also added. The screen format could now be changed from a dedicated selection page. Deluxe Paint III appeared in 1989 and added support for Extra Halfbrite. New editing modes allowed one to stencil certain colors to protect them, so it is possible to e.g. paint a landscape from front to back, with the foreground protected by a stencil. A major new feature of Deluxe Paint III was the ability to create cel-like animation, and animbrushes (1MB of RAM is needed for animation). These let the user pick up a section of an animation as an "animbrush", which can then be placed onto the canvas while it animates. Deluxe Paint III was one of the first paint programs to support animbrushes. This is similar to copy and paste, except one can pick up more than one image. Deluxe Paint IV (introduced in 1991), which did not include Silva as the lead programmer, offered significant new features like non-bitplane-indexed Hold-and-Modify support for creating images with up to 4,096 colors. Animation support was improved by adding a light table, i.e. onion skinning, and AnimBrush morphing. The color mixer was now a HAM region at the bottom of the screen (instead of a floating window as before) and allowed mixing adjacent colors similar to a real palette. Deluxe Paint 4.5 AGA appeared the following year, addressing the stability issues and providing support for the new A1200 and A4000 AGA machines and a revamped screen mode interface. It appeared in both standalone and Commodore-bundled versions. The final release, Deluxe Paint V, in 1995, supported true 24-bit RGB images. However, using only the AGA native chipset, the 24-bit RGB color was only held in computer memory, the on-screen image was displayed in HAM8 (18-bit color). === Apple IIGS === DeluxePaint II for the Apple IIGS was developed by Brent Iverson and released in 1987. === MS-DOS === Deluxe Paint II for MS-DOS was released in 1988, It required MS-DOS 2.0 and 640 kB of RAM. It supports CGA, EGA, MCGA, VGA, Hercules and Tandy IBM PC-compatible graphic cards. Deluxe Paint II Enhanced was released in 1989, requiring MS-DOS 2.11 and 640 kB of RAM. It supports resolutions up to 800x600 pixels with 256 colors. Deluxe Paint II Enhanced 2.0, released in 1994, was the most successful MS-DOS version, and was compatible with PC Paintbrush PCX image files. The MS-DOS conversion was done by Brent Iverson with the enhanced features by Steve Shaw. It supports CGA, EGA, MCGA, VGA, Hercules, Tandy, and Amstrad video cards, as well as early Super VGA video cards enabling it to support up to 800 × 600 with 256 (from 262,144) colors and 1024 × 768 with 16 colors. The sister product Deluxe Paint Animation (only for 320×200 pixels and 256 colors) was widely used, especially in video game development. === Atari ST === Deluxe Paint ST was developed by ArtisTech Development, published by Electronic Arts, and was released in 1990. It supports the Atari STE 4096 color palette and animated graphics. Features advertised for the Atari ST version include 3D perspective, design your own fonts, mirror symmetry, multi-color airbrushing & animations, printing up to poster size, split-screen magnification with variable zoom, and working on animations (including multiple animations). == Workflow == "[" and "]" hotkeys step through the indexed palette, turning indexed-pixel-painting into a fast two-handed mouse+keys process, and the right mouse button paints with the background color. For example, transparency is obtained as simply as selecting a background color index (a single right click on the palette GUI to change). colors could be locked from editing by use of a stencil (a list of color indices whose pixels should not be altered in the image data) and simple color-cycling animations could be created using contiguous entries in the palette. This was easy to change the hue and tone of a section of the image by altering the corresponding colors in the palette. (The specific section needed to use a dedicated part of the palette for this technique to work.) Brushes can be cut from the background by using the box, freehand, or polygon selection tools. They can then be used in the same manner as any other brush or pen. This functionality is simpler to use than the "stamp" tool of Photoshop or Alpha Channels as provided in later programs. Brushes can be rotated and scaled, even in 3D. After a brush is selected, it appears attached to the mouse cursor, providing an exact preview of what will be drawn. This allows precise pixel positioning of brushes. Animations stored in IFF ANIM format are delta compressed making animations both smaller and faster to playback. == Reception == Compute! criticized the documentation of the first release of DeluxePaint as inadequate, but stated that "DeluxePaint is a visual arts program of immense scope and flexibility". In later versions the documentation was much improved; for instance DeluxePaint IV came with a 300-page manual. Deluxe Paint was a hit for EA. The main line of the series, particularly installments one to three, has won a total of at least nine awards from independent publications and organizations, including three Amiga-specific awards. Deluxe Paint III also won Commodore International's Enterprise and Vision award in 1990, becoming the first software to win the award, for what the company's judges believed to be best utilizing the Amiga's graphical capabilities. Deluxe Pai

  Read more →
• 

  Cyber attribution

  In the area of computer security, cyber attribution is an attribution of cybercrime, i.e., finding who perpetrated a cyberattack. Uncovering a perpetrator may give insights into various security issues, such as infiltration methods, communication channels, etc., and may help in enacting specific countermeasures. Cyber attribution is a costly endeavor requiring considerable resources and expertise in cyber forensic analysis. For governments and other major players dealing with cybercrime would require not only technical solutions, but legal and political ones as well, and for the latter ones cyber attribution is crucial. Attributing a cyberattack is difficult, and of limited interest to companies that are targeted by cyberattacks. In contrast, secret services often have a compelling interest in finding out whether a state is behind the attack. A further challenge in attribution of cyberattacks is the possibility of a false flag attack, where the actual perpetrator makes it appear that someone else caused the attack. Every stage of the attack may leave artifacts, such as entries in log files, that can be used to help determine the attacker's goals and identity. In the aftermath of an attack, investigators often begin by saving as many artifacts as they can find, and then try to determine the attacker.

  Read more →
• 

  Computer Graphics International

  Computer Graphics International (CGI) is one of the oldest annual international conferences on computer graphics. It is organized by the Computer Graphics Society (CGS). Researchers across the whole world are invited to share their experiences and novel achievements in various fields - like computer graphics and human-computer interaction. Former conferences have been held recently in Hong Kong (China), Geneva (Switzerland), Shanghai (China), Geneva (virtually), Calgary (Canada), Bintan (Indonesia) and Yokohama (Japan). == Awards == Starting in the year of 2013, CGI has given yearly a Best Paper Award and a Career Achievement Award. == Venues ==

  Read more →
• 

  Image

  An image or picture is a visual representation. An image can be two-dimensional, such as a drawing, painting, or photograph, or three-dimensional, such as a carving or sculpture. Images may be displayed through other media, including a projection on a surface, activation of electronic signals, or digital displays; they can also be reproduced through mechanical means, such as photography, printmaking, or photocopying. Images can also be animated through digital or physical processes. In the context of signal processing, an image is a distributed amplitude of color(s). In optics, the term image (or optical image) refers specifically to the reproduction of an object formed by light waves coming from the object. A volatile image exists or is perceived only for a short period. This may be a reflection of an object by a mirror, a projection of a camera obscura, or a scene displayed on a cathode-ray tube. A fixed image, also called a hard copy, is one that has been recorded on a material object, such as paper or textile. A mental image exists in an individual's mind as something one remembers or imagines. The subject of an image does not need to be real; it may be an abstract concept such as a graph or function or an imaginary entity. For a mental image to be understood outside of an individual's mind, however, there must be a way of conveying that mental image through the words or visual productions of the subject. == Characteristics == === Two-dimensional images === The broader sense of the word 'image' also encompasses any two-dimensional figure, such as a map, graph, pie chart, painting, or banner. In this wider sense, images can also be rendered manually, such as by drawing, the art of painting, or the graphic arts (such as lithography or etching). Additionally, images can be rendered automatically through printing, computer graphics technology, or a combination of both methods. A two-dimensional image does not need to use the entire visual system to be a visual representation. An example of this is a grayscale ("black and white") image, which uses the visual system's sensitivity to brightness across all wavelengths without taking into account different colors. A black-and-white visual representation of something is still an image, even though it does not fully use the visual system's capabilities. On the other hand, some processes can be used to create visual representations of objects that are otherwise inaccessible to the human visual system. These include microscopy for the magnification of minute objects, telescopes that can observe objects at great distances, X-rays that can visually represent the interior structures of the human body (among other objects), magnetic resonance imaging (MRI), positron emission tomography (PET scans), and others. Such processes often rely on detecting electromagnetic radiation that occurs beyond the light spectrum visible to the human eye and converting such signals into recognizable images. === Three-dimensional images === Aside from sculpture and other physical activities that can create three-dimensional images from solid material, some modern techniques, such as holography, can create three-dimensional images that are reproducible but intangible to human touch. Some photographic processes can now render the illusion of depth in an otherwise "flat" image, but "3-D photography" (stereoscopy) or "3-D film" are optical illusions that require special devices such as eyeglasses to create the illusion of depth. === Moving images === "Moving" two-dimensional images are actually illusions of movement perceived when still images are displayed in sequence, each image lasting less, and sometimes much less, than a fraction of a second. The traditional standard for the display of individual frames by a motion picture projector has been 24 frames per second (FPS) since at least the commercial introduction of "talking pictures" in the late 1920s, which necessitated a standard for synchronizing images and sounds. Even in electronic formats such as television and digital image displays, the apparent "motion" is actually the result of many individual lines giving the impression of continuous movement. This phenomenon has often been described as "persistence of vision": a physiological effect of light impressions remaining on the retina of the eye for very brief periods. Even though the term is still sometimes used in popular discussions of movies, it is not a scientifically valid explanation. Other terms emphasize the complex cognitive operations of the brain and the human visual system. "Flicker fusion", the "phi phenomenon", and "beta movement" are among the terms that have replaced "persistence of vision", though no one term seems adequate to describe the process. == Cultural and other uses == Image-making seems to have been common to virtually all human cultures since at least the Paleolithic era. Prehistoric examples of rock art—including cave paintings, petroglyphs, rock reliefs, and geoglyphs—have been found on every inhabited continent. Many of these images seem to have served various purposes: as a form of record-keeping; as an element of spiritual, religious, or magical practice; or even as a form of communication. Early writing systems, including hieroglyphics, ideographic writing, and even the Roman alphabet, owe their origins in some respects to pictorial representations. === Meaning and signification === Images of any type may convey different meanings and sensations for individual viewers, regardless of whether the image's creator intended them. An image may be taken simply as a more or less "accurate" copy of a person, place, thing, or event. It may represent an abstract concept, such as the political power of a ruler or ruling class, a practical or moral lesson, an object for spiritual or religious veneration, or an object—human or otherwise—to be desired. It may also be regarded for its purely aesthetic qualities, rarity, or monetary value. Such reactions can depend on the viewer's context. A religious image in a church may be regarded differently than the same image mounted in a museum. Some might view it simply as an object to be bought or sold. Viewers' reactions will also be guided or shaped by their education, class, race, and other contexts. The study of emotional sensations and their relationship to any given image falls into the categories of aesthetics and the philosophy of art. While such studies inevitably deal with issues of meaning, another approach to signification was suggested by the American philosopher, logician, and semiotician Charles Sanders Peirce. "Images" are one type of the broad category of "signs" proposed by Peirce. Although his ideas are complex and have changed over time, the three categories of signs that he distinguished stand out: The "icon," which relates to an object by resemblance to some quality of the object. A painted or photographed portrait is an icon by virtue of its resemblance to the painting's or photograph's subject. A more abstract representation, such as a map or diagram, can also be an icon. The "index," which relates to an object by some real connection. For example, smoke may be an index of fire, or the temperature recorded on a thermometer may be an index of a patient's illness or health. The "symbol," which lacks direct resemblance or connection to an object but whose association is arbitrarily assigned by the creator or dictated by cultural and historical habit, convention, etc. The color red, for example, may connote rage, beauty, prosperity, political affiliation, or other meanings within a given culture or context; the Swedish film director Ingmar Bergman claimed that his use of the color in his 1972 film Cries and Whispers came from his personal visualization of the human soul. A single image may exist in all three categories at the same time. The Statue of Liberty provides an example. While there have been countless two-dimensional and three-dimensional "reproductions" of the statue (i.e., "icons" themselves), the statue itself exists as an "icon" by virtue of its resemblance to a human woman (or, more specifically, previous representations of the Roman goddess Libertas or the female model used by the artist Frederic-Auguste Bartholdi). an "index" representing New York City or the United States of America in general due to its placement in New York Harbor, or with "immigration" from its proximity to the immigration center at Ellis Island. a "symbol" as a visualization of the abstract concept of "liberty" or "freedom" or even "opportunity" or "diversity". === Critiques of imagery === The nature of images, whether three-dimensional or two-dimensional, created for a specific purpose or only for aesthetic pleasure, has continued to provoke questions and even condemnation at different times and places. In his dialogue, The Republic, the Greek philosopher Plato described our apparent reality as a copy of a higher order of universal forms.

  Read more →
• 

  The Master Algorithm

  The Master Algorithm: How the Quest for the Ultimate Learning Machine Will Remake Our World is a book by Pedro Domingos released in 2015. Domingos wrote the book in order to generate interest from people outside the field. == Overview == The book outlines five approaches of machine learning: inductive reasoning, connectionism, evolutionary computation, Bayes' theorem and analogical modelling. The author explains these tribes to the reader by referring to more understandable processes of logic, connections made in the brain, natural selection, probability and similarity judgments. Throughout the book, it is suggested that each different tribe has the potential to contribute to a unifying "master algorithm". Towards the end of the book the author pictures a "master algorithm" in the near future, where machine learning algorithms asymptotically grow to a perfect understanding of how the world and people in it work. Although the algorithm doesn't yet exist, he briefly reviews his own invention of the Markov logic network. == In the media == In 2016 Bill Gates recommended the book, alongside Nick Bostrom's Superintelligence, as one of two books everyone should read to understand AI. In 2018 the book was noted to be on Chinese Communist Party general secretary Xi Jinping's bookshelf. === Reception === A computer science educator stated in Times Higher Education that the examples are clear and accessible. In contrast, The Economist agreed Domingos "does a good job" but complained that he "constantly invents metaphors that grate or confuse". Kirkus Reviews praised the book, stating that "Readers unfamiliar with logic and computer theory will have a difficult time, but those who persist will discover fascinating insights." A New Scientist review called it "compelling but rather unquestioning".

  Read more →
• 

  T-vertices

  T-vertices is a term used in computer graphics to describe a problem that can occur during mesh refinement or mesh simplification. The most common case occurs in naive implementations of continuous level of detail, where a finer-level mesh is "sewn" together with a coarser-level mesh by simply aligning the finer vertices on the edges of the coarse polygons. The result is a continuous mesh, however due to the nature of the z-buffer and certain lighting algorithms such as Gouraud shading, visual artifacts can often be detected. Some modeling algorithms such as subdivision surfaces will fail when a model contains T-vertices.

  Read more →
• 

  Computer Graphics: Principles and Practice

  Computer Graphics: Principles and Practice is a textbook written by James D. Foley, Andries van Dam, Steven K. Feiner, John Hughes, Morgan McGuire, David F. Sklar, and Kurt Akeley and published by Addison–Wesley. First published in 1982 as Fundamentals of Interactive Computer Graphics, it is widely considered a classic standard reference book on the topic of computer graphics. It is sometimes known as the bible of computer graphics (due to its size). == Editions == === First Edition === The first edition, published in 1982 and titled Fundamentals of Interactive Computer Graphics, discussed the SGP library, which was based on ACM's SIGGRAPH CORE 1979 graphics standard, and focused on 2D vector graphics. === Second Edition === The second edition, published 1990, was completely rewritten and covered 2D and 3D raster and vector graphics, user interfaces, geometric modeling, anti-aliasing, advanced rendering algorithms and an introduction to animation. The SGP library was replaced by SRGP (Simple Raster Graphics Package), a library for 2D raster primitives and interaction handling, and SPHIGS (Simple PHIGS), a library for 3D primitives, which were specifically written for the book. === Second Edition in C === In the second edition in C, published in 1995, all examples were converted from Pascal to C. New implementations for the SRGP and SPHIGS graphics packages in C were also provided. === Third Edition === A third edition covering modern GPU architecture was released in July 2013. Examples in the third edition are written in C++, C#, WPF, GLSL, OpenGL, G3D, or pseudocode. == Awards == The book has won a Front Line Award (Hall of Fame) in 1998.

  Read more →