AI Face Look

AI Face Look — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  AlphaChip (controversy)

  The AlphaChip controversy refers to a series of public, scholarly, and legal disputes surrounding a 2021 Nature paper by Google-affiliated researchers. The paper describes an approach to macro placement, a stage of chip floorplanning, based on reinforcement learning (RL), a machine learning method in which a system iteratively improves its decisions by optimizing performance-based reward signals. The primary technical question is whether the new techniques are better than existing (non-AI) techniques. Both internal Google studies and external attempts to replicate the algorithm have failed to show the claimed benefits. No head-to-head comparison is available because the data used in the paper is proprietary, and Google has not released any results from running its algorithm on public benchmarks. This has resulted in considerable skepticism over the paper's claims. In addition, the inability of others (both inside and outside of Google) to replicate the claimed results have sparked concerns about the paper’s methodology, reproducibility, and scientific integrity. The lead researchers of the Nature paper were affiliated with Google Brain, which became part of Google DeepMind, and later spun off into the company Ricursive. == Motivation for research: Macro placement in chip layout == Chip design for modern integrated circuits is a complex, expert-driven process that relies on electronic design automation. It determines the performance of the final chip, and takes weeks or months to complete. Advances that produce better designs, or complete the process faster, are commercially and academically significant. Macro placement is a step during chip design that determines the locations of large circuit components (macros) within a chip. It is followed by detailed placement, which places the far more numerous but much smaller standard cells. Alternatively, mixed-size placement simultaneously places both large macros and millions of small cells, requiring algorithms to handle objects that differ by several orders of magnitude in area and mobility. The number of macros per circuit typically ranges from several to thousands. Wiring must be performed after placement, and the details of this wiring strongly influence the power, performance, and area (PPA) of the completed chip. The full wiring calculation is very resource intensive, so placement tools typically use a proxy cost, a simplified objective function used to guide the placement algorithm during training and evaluation. The faithfulness of the chosen proxy cost to the final objective cost is a critical aspect of placer performance. === State of the art as of 2021 === Chips have been designed since the 1960s, so there were many existing methods as of 2021. Available options included manual design, academic tools, and commercial offerings. Academic methods include combinatorial optimization techniques such as simulated annealing, analytical placement, hierarchical heuristics, and as of 2019 reinforcement learning and broader machine learning techniques.. Existing (non-AI) academic tools for solving the same problem include APlace, NTUplace3, ePlace, RePlace, and DREAMPlace. Commercial EDA vendors also offered automated software tools for floorplanning and mixed-size placement. For instance, as of 2019 Cadence’s Innovus implementation software offered a Concurrent Macro Placer (CMP) feature to automatically place large blocks and standard cells. == The 2021 Nature paper and its claims == In 2021, Nature published a paper under the title “A graph‑placement methodology for fast chip design” co‑authored by 21 Google-affiliated researchers. The paper reported that an RL agent could generate macro placements for integrated circuits "in under six hours" and achieve improvements over human-designed layouts in power, timing performance, and area (PPA), standard chip-quality metrics referring respectively to energy consumption, chip operating speed, and silicon footprint (evaluated after wire routing). It introduced a sequential macro placement algorithm in which macros are placed one at a time instead of optimizing their locations concurrently. At each step, the algorithm selects a location for a single macro on a discretized chip canvas, conditioning its decision on the placements of previously placed macros. This sequential formulation converts macro placement into a long-horizon decision process in which early placement choices constrain later ones. After macro placement, force-directed placement is applied to place standard cells connected to the macros. Deep reinforcement learning is used to train a policy network to place macros by maximizing a reward that reflects final placement quality (for example, wirelength and congestion). Policy learning occurs during self‑play for one or multiple circuit designs. Further placement optimizations refine the overall layout by balancing wirelength, density, and overlap constraints, while treating the macro locations produced by the RL policy as fixed obstacles. The approach relies on pre-training, in which the RL model is first trained on a corpus of prior designs (twenty in the Nature paper) to learn general placement patterns before being fine-tuned on a specific chip. Circuit examples used in the study were parts of proprietary Google TPU designs, called blocks (or floorplan partitions). The paper reported results on five blocks and described the approach as generalizable across chip designs. == Controversy == Soon after the paper's publication, controversy arose over whether the claims were true, whether they were sufficiently proven, and whether academic standards were followed. These controversies arose both within Google and among external academic experts. === Internal dispute at Google and legal proceedings === In 2022, Satrajit Chatterjee, a Google engineer involved in reviewing the AlphaChip work, raised concerns internally and drafted an alternative analysis, (Stronger Baselines) arguing that established methods outperformed the RL approach under fair comparison. In March 2022, Google declined to publish this analysis and terminated Chatterjee's employment. Chatterjee filed a wrongful dismissal lawsuit, alleging that representations related to the AlphaChip research involved fraud and scientific misconduct. According to court documents, Chatterjee's study was conducted "in the context of a large potential Google Cloud deal". He noted that it "would have been unethical to imply that we had revolutionary technology when our tests showed otherwise" and claimed Google was deliberately withholding material information. Furthermore, the committee that reviewed his paper and disapproved its publication was allegedly chaired by subordinates of Jeff Dean, a senior co-author of the Nature paper. Google’s subsequent motion to dismiss was denied, holding that Chatterjee had plausibly alleged retaliation for refusing to engage in conduct he believed would violate state or federal law. === External controversy === The external questions can be summarized in four main points: (a) Are the claims supported by the evidence provided? (b) Did the paper provide enough information to allow the results to be independently reproduced and verified? If so, are the results an improvement over existing academic and commercial tools? (c) Were the comparisons in the paper done fairly and with full disclosure? (d) Were academic standards followed? Each of these is discussed below. ==== Are the claims supported by the evidence provided? ==== The Nature paper described the reduction in design-process time as going from "days or weeks" to "hours", but did not provide per-design time breakdowns or specify the number of engineers, their level of expertise, or the baseline tools and workflow against which this comparison was made. It was also unclear whether the "days or weeks" baseline included time spent on other tasks such as functional design changes. The paper also evaluated the method on fewer benchmarks (five) than is common in the field, and showed mixed results across different evaluation goals While the approach was described as improving circuit area, this claim seems unsupported, as the RL optimization did not alter the overall circuit area, as it adjusted only the locations of fixed-shape non-overlapping circuit components within a fixed rectangular layout boundary. ==== Comparison with existing methods, and replicating the algorithm ==== Because macro placement is largely geometric and its fundamental algorithms are not tied to a specific process node, competing approaches can be evaluated on public benchmarks (tests) across technologies, rather than primarily on proprietary internal designs. This is standard procedure when comparing academic placers, see . In contrast, Google has only reported results only on internal proprietary designs, and as of 2026 has not offered comparisons with prior methods on common benchmarks. Researchers at the University of Califor

  Read more →
• 

  Mass media use by the Islamic State

  The Islamic State (IS) is known for its extensive and effective use of propaganda. It uses a version of the Muslim Black Standard flag and developed an emblem which has clear symbolic meaning in the Muslim world. The Islamic State targets younger audiences, such as teenagers and young adults, since they are more vulnerable to propaganda. It is known to exploit the internet to spread its propaganda by establishing websites, such as the Al Fustat domain. Videos by the Islamic State are commonly accompanied by nasheeds (chants), notable examples being the chant Dawlat al-Islam Qamat, which came to be viewed as an unofficial anthem of the Islamic State, and Salil al-Sawarim. Academic research has emphasized the scale and volume of Islamic State media production beyond its flagship magazines. A quantitative study cited in R. Malash’s academic work documented 1,373 distinct Islamic State media products released over a six-month period between 1 August 2017 and 28 February 2018, including magazines, newsletters, reports, photographic releases, audio recordings, and other media formats. Scholars have used such datasets to illustrate the breadth and intensity of the group’s media output, particularly during periods of territorial decline, when propaganda activity remained high despite military pressure. == Traditional media == === Al-Furqan Foundation for Media Production === In January 2006, shortly after the group's rebranding as the "Islamic State of Iraq", it established the Al-Furqan Foundation for Media Production (Arabic: مؤسسة الفرقان للإنتاج الإعلامي, romanized: Muasasat al-Furqān lil'īntāj al'ilāmī), which produces CDs, DVDs, posters, pamphlets, and web-related propaganda products and official statements. It is the primary media production house of the Islamic State and responsible for production of major media releases, including the statements of the spokesmen and leaders of the group. On January 10, 2006, Al-Furqan released its very first video, titled (Arabic: زحف الأنوار, romanized: Zahf al-Anwār) It was founded by the Iraqi man Dr Wa'il al-Fayad, known as Abu Muhammad al-Furqan. He got his name "Al-Furqan" from his role in founding this media house, which was named after the 25th surah of the Quran Al-Furqan. It is the oldest media production house for the Islamic State, being founded in November 2006 to release media for the Islamic State of Iraq. The earliest release indexed by the SITE Intelligence Group is on 21 November 2006, documenting the storming of a police station in the Iraqi town of Miqdadiyah. Al-Furqan is considered to be a considerable innovation in jihadist media, with Kavkaz Center describing it as "a milestone on the path of jihad, a distinguished media that takes the great care in the management of the conflict with the crusaders and their tails and to expose the lies in the crusader's media." In October 2007, the Long War Journal reported on United States Army raids targeting Al-Furqan media cell members across Iraq, including in Mosul and Samarra. Between August 2013 and March 2014 they released the 22 part series Messages from the Land of Epic Battles. On 2 September 2014 SITE Intelligence Group discovered the beheading video called A Second Message to America, about the death of Steven Sotloff. Since then, Al-Furqan has released videos of their operations across Iraq and Syria, as well as execution videos directed to governments around the world. In April 2019, Al-Furqan released a video Interviewing Abu Bakr al-Baghdadi. Al-Furqan also produces media in the form of audio, which consists mostly of recordings of IS leaders and spokesmen giving speeches, as well as producing a single nasheed under their name called "Ya Allah Al-Jannah" (O Allah, (we ask you for) Paradise), sung by now-dead member of IS, Uqab Al-Marzuqi. === Al-I'tisam Foundation for Media Production === The Islamic State of Iraq founded a second media foundation - Al-I'tisam Media Foundation - around 2011, marked by their first video release, titled "The Conqueror of the Murtaddin: Abu Ahmad Al-Ansari". The foundation has since released a few series of videos, 50 parts of "Windows on the Land of Battles", 9 parts of "Pictures from the Land of Battles", a 9-part series quoting leaders about the establishment of the Islamic State, and other series before their last release, "Deterring the Safavids in Salah ad-Din" in 2015. Since then, there were no further releases from their behalf. === Al-Hayat Media Center === In mid-2014, IS established the Al-Hayat Media Center, which targets Western audiences and produces material in English, German, Russian, Urdu, Indonesian, Turkish, Bengali, Chinese, Bosnian, Kurdish, Uyghur, and French. When IS announced its expansion to other countries in November 2014 it established media departments for the new branches, and its media apparatus ensured that the new branches follow the same models it uses in Iraq and Syria. Then FBI Director James Comey said that IS's "propaganda is unusually slick," noting that, "They are broadcasting... in something like 23 languages". In July 2014, Al-Hayat began publishing a digital magazine called Dabiq, in a number of different languages including English. According to the magazine, its name is taken from the town of Dabiq in northern Syria, which is mentioned in a hadith about Armageddon. Al-Hayat also began publishing other digital magazines, including the Turkish language Konstantiniyye, the Ottoman word for Istanbul, the French language Dar al-Islam, and the Russian language Istok (Russian: Исток). By late 2016, these magazines had apparently all been discontinued, with Al-Hayat's material being consolidated into a new magazine called Rumiyah (Arabic for Rome). === Al-Naba === While the group's glossy, foreign-language magazines like Dabiq and Rumiyah ceased publication as the group lost territory, the weekly Arabic newsletter Al-Naba (The News) has continued to publish regularly, becoming the central pillar of the group's "media jihad" in the post-territorial phase. Recent scholarship, including studies published in 2025, suggests that Al-Naba serves a dual purpose: maintaining internal cohesion among dispersed fighters and projecting a narrative of endurance to enemies. Unlike the earlier magazines which were designed for recruitment, Al-Naba focuses on bureaucratic reporting, military statistics, and religious instruction. These are then translated and disseminated by decentralized supporter networks ("media mujahideen") to reach non-Arabic speakers. === Furat Media Center === The Al-Furat Media Center is another media center established in around 2015 to cater towards non-Arab speaking audiences. However, unlike the other organizations, the production wasn't as professional as ones made by the other media centers. Instead, they partially relied on local media departments and foreign communities of the Mujahideen to produce short-form videos. However, some professional long-form videos were also made under their behalf. As of now, the media center is the only known active branch of all the media centers of the Islamic State, after heavy losses from past campaigns against them. Their last release was "The Resolve of Muwahhidin in Russia", where videos from the Surovikino penal colony hostage crisis were edited and released. === Ajnad Foundation for Media Production === Ajnad Foundation is one of the official media wings of Islamic State which produces nasheeds and Quran recitations. It was established in January 2014 and has released more than 150 nasheeds. === Asdaa Foundation === Like the Ajnad Foundation, the Asdaa Foundation (Arabic: مؤسسة أصداء) or Asedaa Foundation produces Anasheed (Islamic chants). The foundation is the closest counterpart to Ajnad in producing Islamic State nasheeds, only difference being Ajnad is directly linked to the Islamic State while Asdaa is only classified as a "supporter organization" (munaser/munasera). The foundation had humble beginnings possibly in Yemen, where low-quality nasheeds were produced at first by 2 munshids, Abu Layth Al-Iraqi and Abu Ya'qub Al-Yamani. After that, the quality had improved a bit (possibly with new equipment and increased recognition) and eventually had its nasheeds included in the Islamic State's official media releases. One of its munshids, Abu Hafs is a renowned munshid who sings around 70 nasheeds, who as well works with Ajnad Foundation in some instances. He is currently alive, and working under Ansar Production Center (مركز إنتاج الأنصار), another Munasir foundation and Asedaa. Another Yemeni munshid, Abu Musab al-Adani, worked temporarily with Asdaa Foundation before defecting back to AQAP, from which he previously defected from. Some of their anasheed is used in IS's execution videos, a popular one is their human slaughterhouse execution video released during the time of Eid Al-Adha in 2016. The background nasheed they used was "We Came To Fill The Horizons With Terror", produced by the Asd

  Read more →
• 

  Variable-message sign

  A variable- (also changeable-, electronic-, or dynamic-) message sign or message board, often abbreviated VMS, VMB, CMS, or DMS, and in the UK known as a matrix sign, is an electronic traffic sign often used on roadways to give travelers information about special events. Such signs warn of traffic congestion, accidents, incidents such as terrorist attacks, Amber/Silver/Blue Alerts, roadwork zones, or speed limits on a specific highway segment. In urban areas, VMS are used within parking guidance and information systems to guide drivers to available car parking spaces. They may also ask vehicles to take alternative routes, limit travel speed, warn of duration and location of the incidents, inform of the traffic conditions, or display general public safety messages. == History == VMS systems were deployed at least as early as the 1950s on the New Jersey Turnpike. The road's signs of that period, and up to around 2012, were capable of displaying a few messages in neon, all oriented around warning drivers to slow down: "REDUCE SPEED", followed by a warning of either construction, accident, congestion, ice, snow, or fog at a certain distance ahead. The New Jersey Turnpike Authority replaced those signs (along with 1990s-vintage dot-matrix VMS systems along the Garden State Parkway) with more flexible electronic signs between 2010 and 2016. The current VMS systems are largely deployed on freeways, trunk highways, or in work zones. On the interchange of I-5 and SR 120 in San Joaquin County, California, an automated visibility and speed warning system was installed in 1996 to warn traffic of reduced visibility due to fog (where tule fog is a common problem in the winter), and of slow or stopped traffic. Message Signs were deployed in Ontario during the 1990s and are now being upgraded on 400-series highways as well as two pilot secondary highways in northeastern Ontario. == Technologies and types == Early variable message signs included static signs with words that would illuminate (often using neon tubing) indicating the type of incident that occurred, or signs that used rotating prisms (trilons) to change the message being displayed. These were later replaced by dot matrix displays typically using eggcrate, fiber optic, or flip-disc technology, which were capable of displaying a much wider range of messages than earlier static variable message signs. Since the late 1990s, the most common technology used in new installations for variable message signs are LED displays. In recent years, some newer LED variable message signs have the ability to display colored text and graphics. Dot-matrix variable message signs are divided into three subgroups: character matrix, row matrix, and full matrix. In a character matrix VMS, each character is given its own matrix with equal horizontal spacing between them, typically with two or three rows of characters. In a full matrix VMS, the entire sign is a single large dot matrix display, allowing the display of different fonts and graphics. A row matrix VMS is a hybrid of the two types, divided into two or three rows like a character matrix display, except each row is a single long dot matrix display instead of being split per character horizontally. Overhead variable message signs are today available in three form factors: front access, rear access, and walk-in. In a front access variable message sign, maintenance is performed by lifting the sign open from the front. Most smaller VMS are of the front access form factor, and are typically installed today on major arterials. The rear access form factor is similar to the front access form factor, except that maintenance is performed from the rear of the sign, and are commonly used for medium-sized dynamic message signs installed along the roadside of freeways (instead of overhead). The walk-in form factor is a more recent introduction, where maintenance on the sign is performed from the inside of the sign. A key advantage of the walk-in form factor is that lane closures are generally not required to perform maintenance on the sign. Most of the largest VMS units installed today are walk-in units, and are typically installed overhead on freeways. The NJ Turnpike Authority counts five unique types of variable message signs under its jurisdiction, at least one of which has been replaced by newer signs. They are: "REDUCE SPEED" neon signs (1950s-2010, obsolete, have now been replaced). "Changeable message signs" (trilon/ rotating-drum signs that can be used for closing roads or moving traffic to other roadways). Electronic VMS: signs with remotely controlled messages displayed on them; the messages are sent from the State Traffic Management Center, updating the signs automatically. Variable speed limit signs - used for varying the posted speed limits within work zones and in emergencies. Portable VMS: movable "electronic VMS". A portable VMS has much the same characteristics as a fixed electronic VMS, but can be moved from location to location as the need dictates. == Usage == Early models required an operator to be physically present when programming a message, whereas newer models may be reprogrammed remotely via a wired or wireless network or cellphone connection. A complete message on a panel generally includes a problem statement indicating incident, roadwork, stalled vehicle etc.; a location statement indicating where the incident is located; an effect statement indicating lane closure, delay, etc. and an action statement giving suggestion what to do traffic conditions ahead. These signs are also used for Amber alert messages, and in some states, Silver and Blue Alert messages. In some places, VMSes are set up with permanent, semi-static displays indicating predicted travel times to important traffic destinations such as major cities or interchanges along the route of a highway. Typical messages provide the following information: Promotional messages about services provided by a road authority during non-critical hours, such as carpooling efforts, travelers' information stations and 5-1-1 lines Crashes, including vehicle spin-out or rollover Road Works Incidents affecting normal traffic flow in a lane or on shoulders Non-recurring congestion, often a residual effect of cleared crash Closures of an entire road, e.g. over a mountain pass in winter. Exit ramp closures Debris on roadway Vehicle fires Wildfires Short-term maintenance or construction lasting less than three days Pavement failure alerts AMBER, Silver, and Blue Alerts, as well as weather warnings via the warning infrastructure of NOAA Weather Radio's SAME system Travel times Variable speed limits Car park occupancy levels speed sign, for recommending a speed to approach the next traffic light in its green phase. The information comes from a variety of traffic monitoring and surveillance systems. It is expected that by providing real-time information on special events on the oncoming road, VMS can improve motorists' route selection, reduce travel time, mitigate the severity and duration of incidents and improve the performance of the transportation network. === United Kingdom === Do not enter the motorway when the red lamps are flashing in pairs from side to side. On 27 March 1972, the first motorway computer-controlled warning lights in the UK, with 59 miles on the M6 from Broughton, Lancashire to Barthomley, on the Cheshire boundary, and 26 miles on the M62 east of Whitefield, was switched on by Michael Heseltine and Charles Legh Shuldham Cornwall-Legh, 5th Baron Grey of Codnor at the headquarters of Cheshire Constabulary on Nuns Road. It was centred at a police computer centre at Westhoughton, that connected to police stations in Preston and Chester. The Chester site was soon be connected to the M53 and M57. Four other regional computer centres would be opened at Perry Barr near the M6, Scratchwood near the M1, at Hook near the M3, and at Almondsbury near the M4. Most British motorways would be covered by 1975. The system was designed by GEC and had taken five years to design. == Safety messages for drivers == Increasingly, signs have been used to remind drivers to buckle seat belts ("Click It or Ticket"), obey the speed limit, and stay off the road if impaired ("Drive sober or get pulled over"). In a federal study, a slight majority of drivers reported that public safety messages on dynamic message signs impacted their driving behaviors. The Ohio Department of Transportation began using humorous dynamic message signs in 2015, perplexing some drivers. Examples of humorous signs seen in New Jersey, Arizona, Texas, Pennsylvania, Delaware, Iowa, New York, Minnesota and Ohio include: "Hold on to your butts. Help prevent forest fires." "We'll be blunt. Don't drive high." "Visiting in-laws? Slow down, get there late." "Only sparklers should be lit." and “Don’t drive Star Spangled hammered." (for Fourth of July) "Hocus pocus – drive with focus." and "Slow down in work zones - my mummy works here." (f

  Read more →
• 

  Matt Mullenweg

  Matthew Charles Mullenweg (born January 11, 1984) is an American web developer and entrepreneur. He is known as a co-founder of the free and open-source web publishing software WordPress, and the founder of Automattic. == Early life and education == Mullenweg was born January 11, 1984, in Houston, Texas, to Chuck and Kathleen Mullenweg and grew up in the Willowbend neighborhood. His older sister was born in 1974. His father, who died in 2016, was a computer programmer who worked for Brown & Root, and encouraged his children to start using home computers at an early age. His mother was a stay-at-home mother. The Mullenwegs were raised Catholic. He attended Kinder High School for the Performing and Visual Arts, studying jazz and playing the saxophone. Mullenweg suffered from migraines as a child that forced him to miss extended periods of school. He attended the University of Houston for two years, studying philosophy and political science. He dropped out after his sophomore year in 2004 to work for CNET, which promised him that he could allocate time to the development of WordPress. == Career == Mullenweg began blogging in 2002 on the open source platform b2. B2 developer Michael Valdrighi abandoned the project and Mullenweg took it over in 2003. He and Mike Little created a b2 fork that year they called WordPress and published it under the GNU General Public License. In March 2003, he co-founded the Global Multimedia Protocols Group (GMPG) with Eric A. Meyer and Tantek Çelik. In April 2004, he helped launch Ping-O-Matic, a mechanism for notifying search engines about blog updates. In October 2004, he was hired by CNET who would allow him to develop WordPress part-time as part of his job. He dropped out of college and moved to San Francisco for the position. === Automattic === After leaving CNET in 2005, Mullenweg founded Automattic as a fully distributed company. Toni Schneider was hired as CEO so Mullenweg could learn how to manage a large organization. During this period, Mullenweg focused on product development while Schneider managed the company. In January 2014, Mullenweg resumed the role of CEO, replacing Schneider. He led Automattic's expansion and a series of acquisitions, including WooCommerce in 2015, The Atavist Magazine in 2018, Tumblr in 2019, Pocket Casts in 2021, and Beeper in 2024. Mullenweg received the Heinz Award for Technology, the Economy and Employment in 2016, for "helping to democratize online publishing". Automattic's valuation reached $7.5 billion in 2021. At the time, WordPress hosted 28 million websites, or 40 percent of all websites on the Internet. == Public disputes == On several occasions, Mullenweg has publicly challenged competitors to WordPress and WordPress.com. He has stated that he prefers to settle disputes in the court of public opinion and described his approach as "brinksmanship", noting that the potential cost of legal action could put Automattic in a "tough spot". In 2008, shortly before WordPress 2.5's release, Six Apart's Movable Type published "A WordPress 2.5 Upgrade Guide"—a comparison of their CMS with their rival, WordPress—as a company blog article that Mullenweg characterized as "desperate and dirty". In 2013, developers on the digital marketplace Envato were banned from speaking at WordPress events after he criticized the platform for selling WordPress themes with the graphics and CSS components under a proprietary license instead of the GPL. In 2016, Mullenweg accused Wix.com, a competitor to WordPress.com, of reusing WordPress's mobile text editor code in Wix's own mobile app without adhering to the terms of the GPL. Despite the license's requirement to publish anything built with GPL code under the GPL, Wix's CEO claimed that the company open-sourced their forked version of the component and satisfied the license's terms before the app switched to its own fork of the MIT-licensed text editor that the WordPress editor was based upon. The new fork added a clause to the MIT license that forbids redistribution under any other license. In 2022, Mullenweg criticized GoDaddy for not reinvesting in the WordPress project sufficiently. On January 9, 2025, the representative of the WordPress Sustainability team, Thijs Buijs, resigned via WordPress.org’s Slack channel, citing dissatisfaction with Matt Mullenweg’s December 24, 2024, Reddit post titled “What drama should I create in 2025?” highlighting concerns about what he described as “unsustainable leadership”. In response, Matt Mullenweg thanked Thijs Buijs for reminding him of the existence of a sustainability team, announced its disbanding, and subsequently closed Wordpress.org's #sustainability Slack channel. === Tumblr === Mullenweg began a three-month sabbatical from his role as CEO at the beginning of February 2024. During that time, Mullenweg engaged in a public feud with a transgender Tumblr user who, frustrated with the failure of Tumblr (owned by Automattic) to address transphobic harassment, posted that she wished Mullenweg would die in a comedic way. The user was subsequently banned. Responding to user uproar, Mullenweg addressed the ban in posts on his personal Tumblr blog, in which he characterized the post as a death threat, and shared private account information about the user. Mullenweg also responded to individual commenters on Tumblr in posts and direct messages, and went to Twitter to respond to the banned user's tweets about the situation. A few days later, transgender employees of Tumblr and Automattic made a post on the official Tumblr staff blog characterizing his response as "unwarranted and harmful" and stating that he did not speak on their behalf. They also said that the user's post was not a realistic threat of violence and not the reason for her ban. === WP Engine dispute === == Audrey Capital == Mullenweg is a principal at angel investment firm Audrey Capital, which he co-founded in 2008 alongside Naveen Selvadurai and Audrey Kim. As of 2024, the company lists investments in companies such as CoinDesk, MakerBot, Sonos, SpaceX, Ring, as well as software companies including Calm, Chartbeat, DailyBurn, Memrise, Genius, Nord Security and Telegram. It has also funded startups that provide services to web developers including Creative Market, GitLab, NPM, SendGrid, Stripe and Typekit. From 2017 to 2019, Mullenweg also served as a board member for GitLab. Mullenweg has employed a team of contributors to WordPress through Audrey Capital since 2010, who work separately from Automattic. On the 20th anniversary of WordPress' initial release, Mullenweg announced a scholarship program aimed at the children of significant contributors to open-source projects.

  Read more →
• 

  Computational intelligence

  In computer science, computational intelligence (CI) refers to concepts, paradigms, algorithms and implementations of systems that are designed to show "intelligent" behavior in complex and changing environments. These systems are aimed at mastering complex tasks in a wide variety of technical or commercial areas and offer solutions that recognize and interpret patterns, control processes, support decision-making or autonomously manoeuvre vehicles or robots in unknown environments, among other things. These concepts and paradigms are characterized by the ability to learn or adapt to new situations, to generalize, to abstract, to discover and associate. Nature-analog or nature-inspired methods play a key role in this. CI approaches primarily address those complex real-world problems for which traditional or mathematical modeling is not appropriate for various reasons: the processes cannot be described exactly with complete knowledge, the processes are too complex for mathematical reasoning, they contain some uncertainties during the process, such as unforeseen changes in the environment or in the process itself, or the processes are simply stochastic in nature. Thus, CI techniques are properly aimed at processes that are ill-defined, complex, nonlinear, time-varying and/or stochastic. A recent definition of the IEEE Computational Intelligence Societey describes CI as the theory, design, application and development of biologically and linguistically motivated computational paradigms. Traditionally the three main pillars of CI have been Neural Networks, Fuzzy Systems and Evolutionary Computation. ... CI is an evolving field and at present in addition to the three main constituents, it encompasses computing paradigms like ambient intelligence, artificial life, cultural learning, artificial endocrine networks, social reasoning, and artificial hormone networks. ... Over the last few years there has been an explosion of research on Deep Learning, in particular deep convolutional neural networks. Nowadays, deep learning has become the core method for artificial intelligence. In fact, some of the most successful AI systems are based on CI. However, as CI is an emerging and developing field there is no final definition of CI, especially in terms of the list of concepts and paradigms that belong to it. The general requirements for the development of an “intelligent system” are ultimately always the same, namely the simulation of intelligent thinking and action in a specific area of application. To do this, the knowledge about this area must be represented in a model so that it can be processed. The quality of the resulting system depends largely on how well the model was chosen in the development process. Sometimes data-driven methods are suitable for finding a good model and sometimes logic-based knowledge representations deliver better results. Hybrid models are usually used in real applications. According to actual textbooks, the following methods and paradigms, which largely complement each other, can be regarded as parts of CI: Fuzzy systems Neural networks and, in particular, convolutional neural networks Evolutionary computation and, in particular, multi-objective evolutionary optimization Swarm intelligence Bayesian networks Artificial immune systems Learning theory Probabilistic methods == Relationship between hard and soft computing and artificial and computational intelligence == Artificial intelligence (AI) is used in the media, but also by some of the scientists involved, as a kind of umbrella term for the various techniques associated with it or with CI. Craenen and Eiben state that attempts to define or at least describe CI can usually be assigned to one or more of the following groups: "Relative definition” comparing CI to AI Conceptual treatment of key notions and their roles in CI Listing of the (established) areas that belong to it The relationship between CI and AI has been a frequently discussed topic during the development of CI. While the above list implies that they are synonyms, the vast majority of AI/CI researchers working on the subject consider them to be distinct fields, where either CI is an alternative to AI AI includes CI CI includes AI The view of the first of the above three points goes back to Zadeh, the founder of the fuzzy set theory, who differentiated machine intelligence into hard and soft computing techniques, which are used in artificial intelligence on the one hand and computational intelligence on the other. In hard computing (HC) and traditional AI (e.g. expert systems), inaccuracy and uncertainty are undesirable characteristics of a system, while soft computing (SC) and thus CI focus on dealing with these characteristics. The adjacent figure illustrates this view and lists the most important CI techniques. Another frequently mentioned distinguishing feature is the representation of information in symbolic form in AI and in sub-symbolic form in CI techniques. Hard computing is a conventional computing method based on the principles of certainty and accuracy and it is deterministic. It requires a precisely stated analytical model of the task to be processed and a prewritten program, i.e. a fixed set of instructions. The models used are based on Boolean logic (also called crisp logic), where e.g. an element can be either a member of a set or not and there is nothing in between. When applied to real-world tasks, systems based on HC result in specific control actions defined by a mathematical model or algorithm. If an unforeseen situation occurs that is not included in the model or algorithm used, the action will most likely fail. Soft computing, on the other hand, is based on the fact that the human mind is capable of storing information and processing it in a goal-oriented way, even if it is imprecise and lacks certainty. SC is based on the model of the human brain with probabilistic thinking, fuzzy logic and multi-valued logic. Soft computing can process a wealth of data and perform a large number of computations, which may not be exact, in parallel. For hard problems for which no satisfying exact solutions based on HC are available, SC methods can be applied successfully. SC methods are usually stochastic in nature i.e., they are a randomly defined processes that can be analyzed statistically but not with precision. Up to now, the results of some CI methods, such as deep learning, cannot be verified and it is also not clear what they are based on. This problem represents an important scientific issue for the future. AI and CI are catchy terms, but they are also so similar that they can be confused. The meaning of both terms has developed and changed over a long period of time, with AI being used first. Bezdek describes this impressively and concludes that such buzzwords are frequently used and hyped by the scientific community, science management and (science) journalism. Not least because AI and biological intelligence are emotionally charged terms and it is still difficult to find a generally accepted definition for the basic term intelligence. == History == In 1950, Alan Turing, one of the founding fathers of computer science, developed a test for computer intelligence known as the Turing test. In this test, a person can ask questions via a keyboard and a monitor without knowing whether his counterpart is a human or a computer. A computer is considered intelligent if the interrogator cannot distinguish the computer from a human. This illustrates the discussion about intelligent computers at the beginning of the computer age. The term Computational Intelligence was first used as the title of the journal of the same name in 1985 and later by the IEEE Neural Networks Council (NNC), which was founded 1989 by a group of researchers interested in the development of biological and artificial neural networks. On November 21, 2001, the NNC became the IEEE Neural Networks Society, to become the IEEE Computational Intelligence Society two years later by including new areas of interest such as fuzzy systems and evolutionary computation. The NNC helped organize the first IEEE World Congress on Computational Intelligence in Orlando, Florida in 1994. On this conference the first clear definition of Computational Intelligence was introduced by Bezdek: A system is computationally intelligent when it: deals with only numerical (low-level) data, has pattern-recognition components, does not use knowledge in the AI sense; and additionally when it (begins to) exhibit (1) computational adaptivity; (2) computational fault tolerance; (3) speed approaching human-like turnaround and (4) error rates that approximate human performance. Today, with machine learning and deep learning in particular utilizing a breadth of supervised, unsupervised, and reinforcement learning approaches, the CI landscape has been greatly enhanced, with novell intelligent approaches. == The main algorithmic approaches of CI and their applicati

  Read more →
• 

  Media preservation

  Preservation of documents, pictures, recordings, digital content, etc., is a major aspect of archival science. It is also an important consideration for people who are creating time capsules, family history, historical documents, scrapbooks and family trees. Common storage media are not permanent, and there are few reliable methods of preserving documents and pictures for the future. == Paper/prints (photos) == Color negatives and ordinary color prints may fade away to nothing in a relatively short period if not stored and handled properly. This happens even if the negatives and prints are kept in the dark, because ambient light is not the determining factor, but heat and humidity are. The color degradation is the result of the dyes used in the color processes. Because color processing results in a less stable image than traditional black-and-white processing, black-and-white pictures from the 1920s are more likely to survive long-term than color films and photographs from after the middle 20th century. Black-and-white photographic films using silver halide emulsions are the only film types that have proven to last for archival storage. The determining factors for longevity include the film base type, proper processing (develop, stop, fix and wash) and proper storage. Early films used a Cellulose nitrate base which was prone to decomposition and highly flammable. Nitrate film was replaced with acetate-base films. These Cellulose acetate films were later discovered to outgass acids (also referred to as vinegar syndrome). Acetate films were replaced in the early 1980s by polyester film base materials which have been determined to be more stable than film stocks with a nitrate or acetate base. Color prints made on most inkjet printers look very good at first but they have a very short lifespan, measured in months rather than in years. Even prints from commercial photo labs will start to fade in a matter of years if not processed properly and stored in cool, dry environments. == Documents/books == With documents for which the media are not so critical as what the documents contain, the information in documents can be copied by using photocopiers and image scanners. Books and manuscripts can also have their information saved without destruction by using a book scanner. Where the medium itself needs to be preserved, for example if a document is a crayon sketch by a famous artist on paper, a complex process of preservation may be used. Depending on the condition and importance of the item this can include gluing the media onto more stable media, or protective enclosing of the media. Polyester sleeves, acid-free folders, and pH buffered document boxes are common supportive protective enclosures whose selection must match the media's chemical and physical properties. Other considerations in preserving paper/books are: Damaging light, particularly UV light, which fades and destroys media over time by breaking down the molecules. Atmosphere contains small traces of sulfur dioxide and nitric acid which turn media yellow and break the fibers down. Humidity and moisture also aid in the breakdown of media. If there is too much, the document can be attacked by bacteria, and if too little, cellulose material breaks down. Temperature, particularly elevated ones, can destroy some media. Low temperatures can cause the water to form crystals which expands destroying the structure of paper-based documents. == Online photo albums == Although there are many websites that allow the upload of photographs and videos, digital preservation for the long-term is still considered an issue. There is a lack of confidence that such websites are capable of storing data for long periods of time (ex. 50 years) without data degradation or loss. == Optical media - CD, DVD, Blu-ray, M-Disc == Write-once optical media, such as CD-Rs and DVD-Rs, typically contain an organic dye that distinguishes data reading from data writing based on the dye's transparency along the disc. Conventional CDs and DVDs have finite shelf-life due to natural degradation of the dye; the newer M-DISC uses inorganic material technology to produce molded DVDs and Blu-Rays (up to 3-layer 100GB BDXL) with a claimed lifespan of 100-1000 years if stored correctly with most BD & BDXL rated read/writers enabling the higher power mode for the M-Disc format after 2011. The National Archives and Records Administration lists published life expectancies to be 10 or 25 years or more for normal CDs and DVDs and conservative life expectancies to be between 2 and 5 years. Storage environments, such as temperature and humidity, as well as handling conditions such as frequency of media use and compatibility between the recorder and media, affect media shelf-life. Improvements in media storage and migrations to new recording technologies can make certain formats obsolete within their respective lifespan. Technologists have pointed to internet streaming services, where services such as video-on-demand have contributed to the 33 percent decline in DVD sales the past 5 years, as a challenge for digital preservation. == Magnetic media - video cassettes, tapes, hard drives == Magnetic media such as audio and video tape and floppy disks also have limited life spans. Audio and video tapes require specific care and handling to ensure that the recorded information will be preserved. For information that must be preserved indefinitely, periodic transcription from old media to new ones is necessary, not only because the media are unstable but also because the recording technology may become obsolete. Magnetic media also deteriorates naturally with typical shelf lives between 10 and 20 years. Magnetic tape can degrade from binder hydrolysis or magnetic remanence decay. Binder hydrolysis, also known as sticky-shed syndrome, refers to the breakdown of binder, or glue, that holds the magnetic particles to the polyester base of the tape. Tapes which have been stored in hot, humid conditions are particularly vulnerable to this phenomenon and may suffer from accelerated degradation. Severe binder can cause the magnetic material to fall off or sheds from the base, leaving a pile of dust and clear backing. Archivists can bake the tape, which evaporates water molecules on the tape, to temporarily restore the binder before making a copy. Magnetic tape can also be destabilized by magnetic remanence decay, which refers to the weakening of the tape's magnetization over time. This weakens the affected tape's readability, leading to reduced sound clarity and volume or picture hue and contrast. Baking the tape will not restore magnetization. Media at risk include recorded media such as master audio recordings of symphonies and videotape recordings of the news gathered over the last 40 years. Threats to media that must be considered when archiving important record media include accidental erasure, physical loss due to disasters such as fires and floods, and media degradation. Along with the actual media being degraded over the years, the machines that are available to play back or reproduce the audio sources are becoming archaic themselves. Manufacturers and their support (parts, technical updates) for their machines have disappeared throughout the years. Even if the medium is vaulted and archived correctly, the mechanical properties of the machines have deteriorated to the point that they could do more harm than good to the tape being played. Many major film studios are now backing up their libraries by converting them to electronic media files, such as .AIFF or .WAV-based files via digital audio workstations. That way, even if the digital platform manufacturer goes out of business or no longer supports their product, the files can still be played on any common computer. There is a detailed process that must take place previous to the final archival product now that a digital solution is in place. Sample rates and their conversion and reference speed are both critical in this process. In floppy disks, the lubricants inside the plastic jackets of many older floppies promote the decay of the magnetic medium. Also, the alignment of the magnetic particles of the disk substrate may gradually degrade, leading to a loss of formatting and data. Early laser disk media were prone to degradation as the layers of the disk substrate were bonded with an adhesive that was vulnerable to decay and would crumble over time. This would lead the different layers of the disk to peel apart, damaging the pitted data surface and rendering the disk unreadable.

  Read more →
• 

  Communications system

  A communications system is a collection of individual telecommunications networks systems, relay stations, tributary stations, and terminal equipment usually capable of interconnection and interoperation to form an integrated whole. Communication systems allow the transfer of information from one place to another or from one device to another through a specified channel or medium. The components of a communications system serve a common purpose, are technically compatible, use common procedures, respond to controls, and operate in union. In the structure of a communication system, the transmitter first converts the data received from the source into a light signal and transmits it through the medium to the destination of the receiver. The receiver connected at the receiving end converts it to digital data, maintaining certain protocols e.g. FTP, ISP assigned protocols etc. Telecommunications is a method of communication (e.g., for sports broadcasting, mass media, journalism, etc.). Communication is the act of conveying intended meanings from one entity or group to another through the use of mutually understood signs and semiotic rules. == Types == === By media === An optical communication system is any form of communications system that uses light as the transmission medium. Equipment consists of a transmitter, which encodes a message into an optical signal, a communication channel, which carries the signal to its destination, and a receiver, which reproduces the message from the received optical signal. Fiber-optic communication systems transmit information from one place to another by sending light through an optical fiber. The light forms a carrier signal that is modulated to carry information. A radio communication system is composed of several communications subsystems that give exterior communications capabilities. A radio communication system comprises a transmitting conductor in which electrical oscillations or currents are produced and which is arranged to cause such currents or oscillations to be propagated through the free space medium from one point to another remote therefrom and a receiving conductor at such distant point adapted to be excited by the oscillations or currents propagated from the transmitter. Power-line communication systems operate by impressing a modulated carrier signal on power wires. Different types of power-line communications use different frequency bands, depending on the signal transmission characteristics of the power wiring used. Since the power wiring system was originally intended for transmission of AC power, the power wire circuits have only a limited ability to carry higher frequencies. The propagation problem is a limiting factor for each type of power line communications. === By technology === A duplex communication system is a system composed of two connected parties or devices which can communicate with one another in both directions. The term duplex is used when describing communication between two parties or devices. Duplex systems are employed in nearly all communications networks, either to allow for a communication "two-way street" between two connected parties or to provide a "reverse path" for the monitoring and remote adjustment of equipment in the field. An antenna is basically a small length of a conductor that is used to radiate or receive electromagnetic waves. It acts as a conversion device. At the transmitting end it converts high frequency current into electromagnetic waves. At the receiving end it transforms electromagnetic waves into electrical signals that is fed into the input of the receiver. several types of antenna are used in communication. Examples of communications subsystems include the Defense Communications System (DCS). === Examples: by technology === Telephone Mobile phone Tablet computer Television Telegraph Edison Telegraph TV cable Computer === By application area === The term transmission system is used in the telecommunications industry to emphasize the intermediate media, protocols, and equipment in the circuit, rather than particular end-user applications. A tactical communications system is a communications system that (a) is used within, or in direct support of tactical forces (b) is designed to meet the requirements of changing tactical situations and varying environmental conditions, (c) provides securable communications, such as voice, data, and video, among mobile users to facilitate command and control within, and in support of, tactical forces, and (d) usually requires extremely short installation times, usually on the order of hours, in order to meet the requirements of frequent relocation. An Emergency communication system is any system (typically computer based) that is organized for the primary purpose of supporting the two way communication of emergency messages between both individuals and groups of individuals. These systems are commonly designed to integrate the cross-communication of messages between are variety of communication technologies. An Automatic call distributor (ACD) is a communication system that automatically queues, assigns and connects callers to handlers. This is used often in customer service (such as for product or service complaints), ordering by telephone (such as in a ticket office), or coordination services (such as in air traffic control). A Voice Communication Control System (VCCS) is essentially an ACD with characteristics that make it more adapted to use in critical situations (no waiting for dial tone, or lengthy recorded announcements, radio and telephone lines equally easily connected to, individual lines immediately accessible etc..) == Key components == =

  Read more →
• 

  Over-the-top media services in India

  As per Govt of India, there are currently about 57 providers of over-the-top media services (OTT) in India, which distribute streaming media or video on demand over the Internet. == History and growth == The first dependent Indian OTT platform was BIGFlix, launched by Reliance Entertainment in 2008. In 2010 Digivive launched India's first OTT mobile app called nexGTv, which provides access to both live TV and on–demand content. nexGTV was the first app to live–stream Indian Premier League matches on smart phones and did so during 2013 and 2014. The livestream of the IPL since 2015, when rights were won, played an important role in the growth of another OTT platform, Hotstar (now JioHotstar) in India. OTT Platforms gained significant momentum in India when both DittoTV (Zee) and Sony Liv were launched in the Indian market around 2013. Following the initial push of Regional OTT platforms like Aha, Hoichoi, Sun NXT, Planet Marathi, Chaupal & MX Player. The Indian OTT industry saw rapid transformation with the entry of global OTT companies such as Netflix and Amazon Prime Video into the Indian market in 2016. Replacement of this competition with global enterprises caused local rivals to innovate in both region and hyper-regional content. === Hotstar === Hotstar (now JioHotstar) is the most subscribed–to OTT platform in India, owned by JioStar as of February 2025, with around 500 million active users and over 650 million downloads. According to Hotstar's India Watch Report 2018, 96% of watch time on Hotstar comes from videos longer than 20 minutes, while one–third of Hotstar subscribers watch television shows. In 2019, Hotstar began investing ₹120 crore in generating original content such as "Hotstar Specials." 80% of the viewership on Hotstar comes from drama, movies and sports programs. Hotstar has the exclusive streaming rights of IPL in India. === Netflix === American streaming service Netflix entered India in January 2016. In April 2017, it was registered as a limited liability partnership (LLP) and started commissioning content. It earned a net profit of ₹2020,000 (₹2.02 million) for fiscal year 2017. In fiscal year 2018, Netflix earned revenues of ₹580 million. According to Morgan Stanley Research, Netflix had the highest average watch time of more than 120 minutes but viewer counts of around 20 million in July 2018. As of 2018, Netflix has six million subscribers, of which 5–6% are paid members. India was not affected by Netflix's July 2018 increase in subscription rates for the US and Latin America. Netflix has stated its intent to invest ₹600 crore in the production of Indian original programming. In late 2018, Netflix bought 150,000 square feet (14,000 m2) of office space in Bandra–Kurla Complex (BKC) in Mumbai as their head office. As of December 2018, Netflix has more than 40 employees in India. === Other OTT providers === Sun NXT is an Indian video on demand service run by Sun TV Network. It was launched in June 2017, streaming in the Tamil language and six other languages. The platform has more than 4,000 Tamil movies and 200 Tamil shows, as well as regional movies and shows. Sun NXT also streams a large library of its own Sun TV shows and movies. Amazon Prime Video was launched in 2016. The platform has 2,300 titles available including 2,000 movies and about 400 shows. It has announced that it will invest ₹20 billion in creating original content in India. Besides English, Prime Video is available in six Indian languages as of December 2018. Amazon India launched Amazon Prime Music in February 2018. Eros Now, an OTT platform launched by Eros International, has the most content among the OTT providers in India, including over 12,000 films, 100,000 music tracks and albums, and 100 TV shows. Eros Now was named the Best OTT Platform of the Year 2019 at the British Asian Media Awards. It has 211.5 million registered users and 36.2 million paying subscribers as of September 2020. In February 2020, Aha OTT platform was launched, broadcasting exclusively Telugu content. In 2021, Planet Marathi became the first OTT platform dedicated to Marathi content in India, including web-series, films, music, theater, fiction and non-fiction reality shows. It is available for both Android and iOS mobile devices along with Android TV and Amazon Fire TV devices. Bollywood actress Madhuri Dixit helped launch the platform. With rising interest for Korean dramas, Rakuten Viki saw its biggest jump of web traffic from India in 2020 due to the COVID-19 lockdown, which led to ad localization on the platform. The OTT market in fiscal year 2020 was estimated to be worth $1.7 billion. === SonyLIV and ZEE5 === In December 2021, Sony and Zee announced their merger, and announced plans to merge their OTT platforms. The merger was called off. === OTT services launched as Amazon Prime video channels === The list is by alphabetical order, not by rank or popularity. == Content regulation == Due to the absence of any rules and regulation regarding OTT content, many OTT providers were accused of showing nudity, vulgarity and obscenity and hurting Hindu religious sentiments in their shows. Series which were the focus of controversy include Four More Shots Please!, Tandav, Paatal Lok, Sacred Games, Mirzapur Lust stories franchise, Rana Naidu. Thank You for Coming, and Annapoorani (2023). According to media reports, between 2018 and 2024, some OTT platforms emerged which started showing porn in the form of web series. Both the Supreme Court and Delhi High Court say that OTT regulation is necessary. === OTT regulation === On 25 Feb 2021, Indian govt introduced self-regulation rules for OTT platforms to stop obscene content and abusive language. On 19 March 2023, I&B minister Anurag Thakur said that self regulation does not mean that OTT should show obscenity and nudity. On 15 April 2023, I&B Secretary Apurva Chandra has said because of the government's soft-touch regulations on OTT industry have led to the creation of content that is undesirable and vulgar. On 26 April 2023, MIB India said that if nudity and obscenity is seen on any OTT platform, strict action will be taken against it. On 16 May 2023, Don't show obscene content, parliamentary panel told to Netflix and Amazon Prime Video. On 20 June 2023, the government told Netflix, Disney+ Hotstar and all other streaming services that their content should be independently reviewed for obscenity and violence before being shown online. On 27 June 2023, DPCGC took punitive action against Ullu for streaming obscene content and asked them to remove all their explicit shows or remove all adult scenes within 15 days. On 18 July 2023, Anarug Thakur said in a meeting with all OTT stakeholders that demeaning Indian culture will not be tolerated. OTT can't show vulgarity and nudity in the garb of 'creative expression'.The cited sources do not mention vulgarity - they say this was about demeaning Indian culture/society. On 22 August 2023, Indian government assured that it will bring rules and regulation to regulate vulgar and obscene content on social media and OTT platforms. On 10 November 2023, MIB India introduces the 'Broadcasting Service Regulation Bill', which included Programme code with Content Evaluation Committee(CEC) for every OTT platforms. Currently public consultation is ongoing till 15 January 2024. The draft bill mandates that all OTT streaming platforms can only broadcast those web series or content, which will be duly certified by Content Evaluation Committee(CEC). On 14 March 2024, the Ministry of Information and Broadcasting banned over 18 OTT apps from Google play store and suspended all of their 57 social media accounts, as well as closed nineteen streaming websites. The banned platforms were MoodX, Prime Play, Hunters, Besharams, Rabbit movies, Voovi, Fugi, Mojflix, Chikooflix, Nuefliks, Xtramood, NeonX VIP, X Prime, Tri Flicks, Uncut Adda, Dreams Films, Hot Shots VIP, and Yessma. On 25 July 2025, the Ministry of Information and Broadcasting banned from 25 OTT apps from Google play store and suspended all of their 40 social media accounts, as well as 26 closed streaming websites. The banned platforms were include ALTT, Ullu, Big Shots App, Desiflix, Boomex, NeonX VIP, Navarasa Lite, Gulab App, Kangan App, Bull App, ShowHit, Jalva App, Wow Entertainment, Look Entertainment, Hitprime, Fugi, Feneo, ShowX, Sol Talkies, Adda TV, HotX VIP, Hulchul App, MoodX, Triflicks, and Mojflix. On 24 February 2026, the Ministry of Information and Broadcasting banned from 5 OTT apps from Google play store and suspended all of their 5 social media accounts, as well as 5 closed streaming websites. The banned platforms were include Feel App, Digi Movieplex, Jugnu App, MoodX VIP, and Koyal Playpro. === Legal action === Currently OTT is regulated under the IT Rules 2021, which clearly stated that 'No content that is prohibited by law at the time being force can be Publishing or transmitted'. MIB has continuously taking action

  Read more →
• 

  Line detection

  In image processing, line detection is an algorithm that takes a collection of n edge points and finds all the lines on which these edge points lie. The most popular line detectors are the Hough transform and convolution-based techniques. == Hough transform == The Hough transform can be used to detect lines and the output is a parametric description of the lines in an image, for example ρ = r cos(θ) + c sin(θ). If there is a line in a row and column based image space, it can be defined ρ, the distance from the origin to the line along a perpendicular to the line, and θ, the angle of the perpendicular projection from the origin to the line measured in degrees clockwise from the positive row axis. Therefore, a line in the image corresponds to a point in the Hough space. The Hough space for lines has therefore these two dimensions θ and ρ, and a line is represented by a single point corresponding to a unique set of these parameters. The Hough transform can then be implemented by choosing a set of values of ρ and θ to use. For each pixel (r, c) in the image, compute r cos(θ) + c sin(θ) for each values of θ, and place the result in the appropriate position in the (ρ, θ) array. At the end, the values of (ρ, θ) with the highest values in the array will correspond to strongest lines in the image == Convolution-based technique == In a convolution-based technique, the line detector operator consists of a convolution masks tuned to detect the presence of lines of a particular width n and a θ orientation. Here are the four convolution masks to detect horizontal, vertical, oblique (+45 degrees), and oblique (−45 degrees) lines in an image. a) Horizontal mask(R1) (b) Vertical (R3) (C) Oblique (+45 degrees)(R2) (d) Oblique (−45 degrees)(R4) In practice, masks are run over the image and the responses are combined given by the following equation: R(x, y) = max(|R1 (x, y)|, |R2 (x, y)|, |R3 (x, y)|, |R4 (x, y)|) If R(x, y) > T, then discontinuity As can be seen below, if mask is overlay on the image (horizontal line), multiply the coincident values, and sum all these results, the output will be the (convolved image). For example, (−1)(0)+(−1)(0)+(−1)(0) + (2)(1) +(2)(1)+(2)(1) + (−1)(0)+(−1)(0)+(−1)(0) = 6 pixels on the second row, second column in the (convolved image) starting from the upper left corner of the horizontal lines. page 82 == Example == These masks above are tuned for light lines against a dark background, and would give a big negative response to dark lines against a light background. == Code example == The code was used to detect only the vertical lines in an image using Matlab and the result is below. The original image is the one on the top and the result is below it. As can be seen on the picture on the right, only the vertical lines were detected

  Read more →
• 

  Pridgen v University of Calgary

  Pridgen v University of Calgary was freedom of speech case which took place in Alberta, Canada, in 2010. The case deals with two university students, Keith and Steven Pridgen, who were found guilty and punished by the University of Calgary in 2008, on grounds of "non-academic misconduct". The University of Calgary defines "non-academic misconduct" as:(a) conduct which causes injury to a person and/or damage to University property and/or the property of any member of the University community; (b) unauthorized removal and/or unauthorized possession of University property; and (c) conduct which seriously disrupts the lawful educational and related activities of other students and/or University staff.The Court of the Queen's Bench of Alberta found the University of Calgary to be wrong in prosecuting ten students, including the Pridgen brothers, in regards to comments made about a professor on Facebook. The key ruling in this case was that the universities are not exempt from, and that these students were in fact protected under, section 2(b) of the Charter of Rights and Freedoms. This case is notable as it highlights the jurisdiction of the Charter in terms of both new media technologies and university institutions in Canada. == Background == Keith and Steven Pridgen were undergraduate students at the University of Calgary in 2008. The twin brothers shared a Law and Society class being taught by Aruna Mitra. Professor Mitra was teaching this class for the first time in her career, and many of the students were very critical of her knowledge of the course. A Facebook page entitled “I NO Longer Fear Hell, I Took a Course with Aruna Mitra” was created, and many students began posting comments. In particular, Steven Pridgen's comment on November 13, 2007, read: “Somehow I think she just got lazy and gave everybody a 65....that's what I got. Does anybody know how to apply to have it remarked?” Many students had similar concerns to Pridgen's and after having their work re-marked, a number of them did in fact receive higher grades. Keith Pridgen also commented on August 26, 2008: “Hey fellow LWSO. Homees.. So I am quite sure Mitra is NO LONGER TEACHING ANY COURSES WITH THE U OF C !!!!! Remember when she told us she was a long-term professor? Well, Actually she was only sessional and picked up our class at the last moment because another prof wasn't able to do it ...lucky us. Well, anyways I think we should all congratulate ourselves for leaving a Mitra-free legacy for future students!” On September 4, 2008, Aruna Mitra complained about the Facebook page to the Interim Dean of the Faculty of Communication and Culture at the University of Calgary. Dean Tettey called a meeting for the ten students who posted material about Mitra on the Facebook page. The meeting took place on September 18, 2008, and included four professors from the department as well as the Dean. At this meeting, all ten students, including the Pridgen brothers, were found guilty of non-academic misconduct. On November 20, 2008, the Appellant's received a letter from Dean Tettey advising them that their comments “clearly caused unwarranted professional and personal injury to Prof. Mitra and clearly meets the criteria for non-academic misconduct as outlined in the University of Calgary Calendar”. Keith Pridgen was put on probation for 24 months, and both brothers were required to write a letter of apology to Prof. Mitra and refrain from posting or circulating defamatory material regarding any faculty members of the University of Calgary. The Pridgen brothers appealed the decision to the University of Calgary Review Committee and later to the Board of Governors of the University of Calgary however neither of these attempts succeeded in having the decision overturned. == Opinion of the Court == Eight main issues to be determined were laid out by the Honourable Madam Justice J. Strekaf: (a) Does the Charter apply to the disciplinary proceedings taken by the Respondent; (b) If, so were the Applicants' Charter rights infringed; (c) Were the actions taken by the University ultra vires the jurisdiction of the Province of Alberta; (d) Did the Board of Governors err in refusing to hear the Applicants appeals; (e) Were the Applicants' denied a fair hearing; (f) Did the Review Committee provide adequate reasons for its decisions; (g) Did the Review Committee err in concluding that the activities of the Applicants constituted non-academic misconduct; and (h) What, if any, remedy should be granted to the Applicants. The Court determined from previous cases that "a non-government entity may still be subject to the Charter of Rights and freedoms when implementing a specific government policy or program". Justice Strekaf distinguished that the University was acting as agent of the provincial government in providing accessible post-secondary education services to students in Alberta pursuant to the provisions of the PSL Act. Justice Strekaf felt there was sufficient evidence to show that universities in Alberta have some level of reliance on government funds and therefore they are not a "Charter free zone". Justice Strekaf concluded that comments made by Keith and Steven Pridgen, regarding Professor Mitra, on Facebook did not constitute academic misconduct and the Pridgen brothers' right to freedom of expression, under section 2(b) of the Charter, was infringed by the University of Calgary Review Committee.

  Read more →
• 

  Democratization of technology

  Democratization of technology is the process by which access to technology rapidly extends to an ever-broader audience, especially from a select group of people to the average public. New technologies and improved user experiences have empowered those outside of the technical industry to access and use technological products and services. At an increasing scale, consumers have greater access to use and purchase technologically sophisticated products, as well as to participate meaningfully in the development of these products. Industry innovation and user demand have been associated with more affordable, user-friendly products. This is an ongoing process, beginning with the development of mass production and increasing dramatically as digitization became commonplace. Thomas Friedman argued that the era of globalization has been characterized by the democratization of technology, democratization of finance, and democratization of information. Technology has been critical in the latter two processes, facilitating the rapid expansion of access to specialized knowledge and tools, as well as changing the way that people view and demand such access. A counter argument is that this is just a process of 'massification' - more people can use banks, technology, have access to information, but it does not mean there is any more democratic influence over its production, or that this massification promotes Democracy. == History == Scholars and social critics often cite the invention of the printing press as a major invention that changed the course of history. The force of the printing press rested not in its impact on the printing industry or inventors, but on its ability to transmit information to a broader public by way of mass production. This event is so widely recognized because of its social impact – as a democratizing force. The printing press is often seen as the historical counterpart to the Internet. After the development of the Internet in 1969, its use remained limited to communications between scientists and within government, although use of email and boards gained popularity among those with access. It did not become a popular means of communication until the 1990s. In 1993 the US federal government opened the Internet to commerce and the creation of HTML formed the basis for universal accessibility. === Major innovations === The Internet has played a critical role in modern life as a typical feature of most Western households, and has been key in the democratization of knowledge. It not only constitutes arguably the most critical innovation in this trend thus far; it has also allowed users to gain knowledge of and access to other technologies. Users can learn of new developments more quickly, and purchase high-tech products otherwise only actively marketed to recognized experts. Social media has also empowered and emboldened users to become contributors and critics of technological developments. Some have argued that cloud computing is having a major effect by allowing users greater access through mobility and pay-as-you-use capacity. The open-source model allows users to participate directly in development of software, rather than indirect participation, through contributing opinions. By being shaped by the user, development is directly responsive to user demand and can be obtained for free or at a low cost. In a comparable trend, arduino and littleBits have made electronics more accessible to users of all backgrounds and ages. The development of 3D printers has the potential to increasingly democratize production. Generative artificial intelligence tools have the potential to democratize the process of innovation by improving the ability of individuals to specify and visualize ideas. The democratization of artificial intelligence refers to the transition from AI as a high-cost, specialized field to one accessible to non-experts and smaller organizations. This process is driven by the release of open-weights models, the availability of cloud computing for model training, and the emergence of no-code development platforms. While early AI development was concentrated within Big Tech firms and elite research universities, the 2020s saw a proliferation of public tools like ChatGPT and repositories such as Hugging Face, which lowered the technical barriers to entry. However, the trend has faced criticism as the "illusion of democratization," as the underlying GPU hardware remains concentrated among a few global providers. == Cultural impact == This trend is linked to the spread of knowledge of and ability to perform high-tech tasks, challenging previous conceptions of expertise. Widespread access to technology, including lower costs, was critical to the transition to the new economy. Similarly, democratization of technology was also fuelled by this economic transition, which produced demands for technological innovation and optimism in technology-driven progress. Since the 1980s, a spreading constructivist conception of technology has emphasized that the social and technical domains are critically intertwined. Scholars have argued that technology is non-neutral, defined contextually and locally by a certain relationship with society. Andrew Feenberg, a central thinker in the philosophy of technology, argued that democratizing technology means expanding technological design to include alternative interests and values. When successful in doing so, this can be a tool for increasing inclusiveness. This also suggests an important participatory role for consumers if technology is to be truly democratic. Feenberg asserts that this must be achieved by consumer intervention in a liberated design process. Improved access to specialized knowledge and tools has been associated with an increase in the "do it yourself" (DIY) trend. This has also been associated with consumerization, whereby personal or privately owned devices and software are also used for business purposes. Some have argued that this is linked to reduced dependence on traditional information technology departments. Astra Taylor, the author of the book The People's Platform: Taking Back Power and Culture in the Digital Age, argues, "The promotion of Internet-enabled amateurism is a lazy substitute for real equality of opportunity." === Industry impact === In some ways, democratization of technology has strengthened this industry. Markets have broadened and diversified. Consumer feedback and input is available at a very low or no cost. However, related industries are experiencing decreased demand for qualified professionals as consumers are able to fill more of their demands themselves. Users of a range of types and status have access to increasingly similar technology. Because of the decreased costs and expertise necessary to use products and software, professionals (e.g. in the audio industry) may experience loss of work. In some cases, technology is accessible but sufficiently complex that most users without specialized training are able to operate it without necessarily understanding how it works. Additionally, the process of consumerization has led to an influx in the number of devices in businesses and accessing private networks that IT departments cannot control or access. While this can lead to lowered operating costs and increased innovation, it is also associated with security concerns that most businesses are unable to address at the pace of the spread of technology. === Political impact === Some scholars have argued that technological change will bring about a third wave of democracy. The Internet has been recognized for its role in promoting increased citizen advocacy and government transparency. Jesse Chen, a leading thinker in democratic engagement technologies, distinguishes the democratizing effects of technology from democracy itself. Chen has argued that, while the Internet may have democratizing effects, the Internet alone cannot deliver democracy at all levels of society unless technologies are purposely designed for the nuances of democracy, specifically the engagement of large groups of people in between elections in and beyond government. The spread of the Internet and other forms of technology has led to increased global connectivity. Many scholars believe that it has been associated in the developing world not only with increased Western influence, but also with the spread of democracy through increased communication, efficiency, and access to information. Scholars have drawn associations between the level of technological connectedness and democracy in many nations. Technology can enhance democracy in the developed world as well. In addition to increased communication and transparency, some electorates have implemented online voting to accommodate an increased number of citizens.

  Read more →
• 

  Pridgen v University of Calgary

  Pridgen v University of Calgary was freedom of speech case which took place in Alberta, Canada, in 2010. The case deals with two university students, Keith and Steven Pridgen, who were found guilty and punished by the University of Calgary in 2008, on grounds of "non-academic misconduct". The University of Calgary defines "non-academic misconduct" as:(a) conduct which causes injury to a person and/or damage to University property and/or the property of any member of the University community; (b) unauthorized removal and/or unauthorized possession of University property; and (c) conduct which seriously disrupts the lawful educational and related activities of other students and/or University staff.The Court of the Queen's Bench of Alberta found the University of Calgary to be wrong in prosecuting ten students, including the Pridgen brothers, in regards to comments made about a professor on Facebook. The key ruling in this case was that the universities are not exempt from, and that these students were in fact protected under, section 2(b) of the Charter of Rights and Freedoms. This case is notable as it highlights the jurisdiction of the Charter in terms of both new media technologies and university institutions in Canada. == Background == Keith and Steven Pridgen were undergraduate students at the University of Calgary in 2008. The twin brothers shared a Law and Society class being taught by Aruna Mitra. Professor Mitra was teaching this class for the first time in her career, and many of the students were very critical of her knowledge of the course. A Facebook page entitled “I NO Longer Fear Hell, I Took a Course with Aruna Mitra” was created, and many students began posting comments. In particular, Steven Pridgen's comment on November 13, 2007, read: “Somehow I think she just got lazy and gave everybody a 65....that's what I got. Does anybody know how to apply to have it remarked?” Many students had similar concerns to Pridgen's and after having their work re-marked, a number of them did in fact receive higher grades. Keith Pridgen also commented on August 26, 2008: “Hey fellow LWSO. Homees.. So I am quite sure Mitra is NO LONGER TEACHING ANY COURSES WITH THE U OF C !!!!! Remember when she told us she was a long-term professor? Well, Actually she was only sessional and picked up our class at the last moment because another prof wasn't able to do it ...lucky us. Well, anyways I think we should all congratulate ourselves for leaving a Mitra-free legacy for future students!” On September 4, 2008, Aruna Mitra complained about the Facebook page to the Interim Dean of the Faculty of Communication and Culture at the University of Calgary. Dean Tettey called a meeting for the ten students who posted material about Mitra on the Facebook page. The meeting took place on September 18, 2008, and included four professors from the department as well as the Dean. At this meeting, all ten students, including the Pridgen brothers, were found guilty of non-academic misconduct. On November 20, 2008, the Appellant's received a letter from Dean Tettey advising them that their comments “clearly caused unwarranted professional and personal injury to Prof. Mitra and clearly meets the criteria for non-academic misconduct as outlined in the University of Calgary Calendar”. Keith Pridgen was put on probation for 24 months, and both brothers were required to write a letter of apology to Prof. Mitra and refrain from posting or circulating defamatory material regarding any faculty members of the University of Calgary. The Pridgen brothers appealed the decision to the University of Calgary Review Committee and later to the Board of Governors of the University of Calgary however neither of these attempts succeeded in having the decision overturned. == Opinion of the Court == Eight main issues to be determined were laid out by the Honourable Madam Justice J. Strekaf: (a) Does the Charter apply to the disciplinary proceedings taken by the Respondent; (b) If, so were the Applicants' Charter rights infringed; (c) Were the actions taken by the University ultra vires the jurisdiction of the Province of Alberta; (d) Did the Board of Governors err in refusing to hear the Applicants appeals; (e) Were the Applicants' denied a fair hearing; (f) Did the Review Committee provide adequate reasons for its decisions; (g) Did the Review Committee err in concluding that the activities of the Applicants constituted non-academic misconduct; and (h) What, if any, remedy should be granted to the Applicants. The Court determined from previous cases that "a non-government entity may still be subject to the Charter of Rights and freedoms when implementing a specific government policy or program". Justice Strekaf distinguished that the University was acting as agent of the provincial government in providing accessible post-secondary education services to students in Alberta pursuant to the provisions of the PSL Act. Justice Strekaf felt there was sufficient evidence to show that universities in Alberta have some level of reliance on government funds and therefore they are not a "Charter free zone". Justice Strekaf concluded that comments made by Keith and Steven Pridgen, regarding Professor Mitra, on Facebook did not constitute academic misconduct and the Pridgen brothers' right to freedom of expression, under section 2(b) of the Charter, was infringed by the University of Calgary Review Committee.

  Read more →
• 

  Algorithmic inference

  Algorithmic inference gathers new developments in the statistical inference methods made feasible by the powerful computing devices widely available to any data analyst. Cornerstones in this field are computational learning theory, granular computing, bioinformatics, and, long ago, structural probability (Fraser 1966). The main focus is on the algorithms which compute statistics rooting the study of a random phenomenon, along with the amount of data they must feed on to produce reliable results. This shifts the interest of mathematicians from the study of the distribution laws to the functional properties of the statistics, and the interest of computer scientists from the algorithms for processing data to the information they process. == The Fisher parametric inference problem == Concerning the identification of the parameters of a distribution law, the mature reader may recall lengthy disputes in the mid 20th century about the interpretation of their variability in terms of fiducial distribution (Fisher 1956), structural probabilities (Fraser 1966), priors/posteriors (Ramsey 1925), and so on. From an epistemology viewpoint, this entailed a companion dispute as to the nature of probability: is it a physical feature of phenomena to be described through random variables or a way of synthesizing data about a phenomenon? Opting for the latter, Fisher defines a fiducial distribution law of parameters of a given random variable that he deduces from a sample of its specifications. With this law he computes, for instance "the probability that μ (mean of a Gaussian variable – omeur note) is less than any assigned value, or the probability that it lies between any assigned values, or, in short, its probability distribution, in the light of the sample observed". == The classic solution == Fisher fought hard to defend the difference and superiority of his notion of parameter distribution in comparison to analogous notions, such as Bayes' posterior distribution, Fraser's constructive probability and Neyman's confidence intervals. For half a century, Neyman's confidence intervals won out for all practical purposes, crediting the phenomenological nature of probability. With this perspective, when you deal with a Gaussian variable, its mean μ is fixed by the physical features of the phenomenon you are observing, where the observations are random operators, hence the observed values are specifications of a random sample. Because of their randomness, you may compute from the sample specific intervals containing the fixed μ with a given probability that you denote confidence. === Example === Let X be a Gaussian variable with parameters μ {\displaystyle \mu } and σ 2 {\displaystyle \sigma ^{2}} and { X 1 , … , X m } {\displaystyle \{X_{1},\ldots ,X_{m}\}} a sample drawn from it. Working with statistics S μ = ∑ i = 1 m X i {\displaystyle S_{\mu }=\sum _{i=1}^{m}X_{i}} and S σ 2 = ∑ i = 1 m ( X i − X ¯ ) 2 , where X ¯ = S μ m {\displaystyle S_{\sigma ^{2}}=\sum _{i=1}^{m}(X_{i}-{\overline {X}})^{2},{\text{ where }}{\overline {X}}={\frac {S_{\mu }}{m}}} is the sample mean, we recognize that T = S μ − m μ S σ 2 m − 1 m = X ¯ − μ S σ 2 / ( m ( m − 1 ) ) {\displaystyle T={\frac {S_{\mu }-m\mu }{\sqrt {S_{\sigma ^{2}}}}}{\sqrt {\frac {m-1}{m}}}={\frac {{\overline {X}}-\mu }{\sqrt {S_{\sigma ^{2}}/(m(m-1))}}}} follows a Student's t distribution (Wilks 1962) with parameter (degrees of freedom) m − 1, so that f T ( t ) = Γ ( m / 2 ) Γ ( ( m − 1 ) / 2 ) 1 π ( m − 1 ) ( 1 + t 2 m − 1 ) m / 2 . {\displaystyle f_{T}(t)={\frac {\Gamma (m/2)}{\Gamma ((m-1)/2)}}{\frac {1}{\sqrt {\pi (m-1)}}}\left(1+{\frac {t^{2}}{m-1}}\right)^{m/2}.} Gauging T between two quantiles and inverting its expression as a function of μ {\displaystyle \mu } you obtain confidence intervals for μ {\displaystyle \mu } . With the sample specification: x = { 7.14 , 6.3 , 3.9 , 6.46 , 0.2 , 2.94 , 4.14 , 4.69 , 6.02 , 1.58 } {\displaystyle \mathbf {x} =\{7.14,6.3,3.9,6.46,0.2,2.94,4.14,4.69,6.02,1.58\}} having size m = 10, you compute the statistics s μ = 43.37 {\displaystyle s_{\mu }=43.37} and s σ 2 = 46.07 {\displaystyle s_{\sigma ^{2}}=46.07} , and obtain a 0.90 confidence interval for μ {\displaystyle \mu } with extremes (3.03, 5.65). == Inferring functions with the help of a computer == From a modeling perspective the entire dispute looks like a chicken-egg dilemma: either fixed data by first and probability distribution of their properties as a consequence, or fixed properties by first and probability distribution of the observed data as a corollary. The classic solution has one benefit and one drawback. The former was appreciated particularly back when people still did computations with sheet and pencil. Per se, the task of computing a Neyman confidence interval for the fixed parameter θ is hard: you do not know θ, but you look for disposing around it an interval with a possibly very low probability of failing. The analytical solution is allowed for a very limited number of theoretical cases. Vice versa a large variety of instances may be quickly solved in an approximate way via the central limit theorem in terms of confidence interval around a Gaussian distribution – that's the benefit. The drawback is that the central limit theorem is applicable when the sample size is sufficiently large. Therefore, it is less and less applicable with the sample involved in modern inference instances. The fault is not in the sample size on its own part. Rather, this size is not sufficiently large because of the complexity of the inference problem. With the availability of large computing facilities, scientists refocused from isolated parameters inference to complex functions inference, i.e. re sets of highly nested parameters identifying functions. In these cases we speak about learning of functions (in terms for instance of regression, neuro-fuzzy system or computational learning) on the basis of highly informative samples. A first effect of having a complex structure linking data is the reduction of the number of sample degrees of freedom, i.e. the burning of a part of sample points, so that the effective sample size to be considered in the central limit theorem is too small. Focusing on the sample size ensuring a limited learning error with a given confidence level, the consequence is that the lower bound on this size grows with complexity indices such as VC dimension or detail of a class to which the function we want to learn belongs. === Example === A sample of 1,000 independent bits is enough to ensure an absolute error of at most 0.081 on the estimation of the parameter p of the underlying Bernoulli variable with a confidence of at least 0.99. The same size cannot guarantee a threshold less than 0.088 with the same confidence 0.99 when the error is identified with the probability that a 20-year-old man living in New York does not fit the ranges of height, weight and waistline observed on 1,000 Big Apple inhabitants. The accuracy shortage occurs because both the VC dimension and the detail of the class of parallelepipeds, among which the one observed from the 1,000 inhabitants' ranges falls, are equal to 6. == The general inversion problem solving the Fisher question == With insufficiently large samples, the approach: fixed sample – random properties suggests inference procedures in three steps: === Definition === For a random variable and a sample drawn from it a compatible distribution is a distribution having the same sampling mechanism M X = ( Z , g θ ) {\displaystyle {\mathcal {M}}_{X}=(Z,g_{\boldsymbol {\theta }})} of X with a value θ {\displaystyle {\boldsymbol {\theta }}} of the random parameter Θ {\displaystyle \mathbf {\Theta } } derived from a master equation rooted on a well-behaved statistic s. === Example === You may find the distribution law of the Pareto parameters A and K as an implementation example of the population bootstrap method as in the figure on the left. Implementing the twisting argument method, you get the distribution law F M ( μ ) {\displaystyle F_{M}(\mu )} of the mean M of a Gaussian variable X on the basis of the statistic s M = ∑ i = 1 m x i {\textstyle s_{M}=\sum _{i=1}^{m}x_{i}} when Σ 2 {\displaystyle \Sigma ^{2}} is known to be equal to σ 2 {\displaystyle \sigma ^{2}} (Apolloni, Malchiodi & Gaito 2006). Its expression is: F M ( μ ) = Φ ( m μ − s M σ m ) , {\displaystyle F_{M}(\mu )=\Phi {\left({\frac {m\mu -s_{M}}{\sigma {\sqrt {m}}}}\right)},} shown in the figure on the right, where Φ {\displaystyle \Phi } is the cumulative distribution function of a standard normal distribution. Computing a confidence interval for M given its distribution function is straightforward: we need only find two quantiles (for instance δ / 2 {\displaystyle \delta /2} and 1 − δ / 2 {\displaystyle 1-\delta /2} quantiles in case we are interested in a confidence interval of level δ symmetric in the tail's probabilities) as indicated on the left in the diagram showing the behavior of

  Read more →
• 

  Digital cinematography

  Digital cinematography is the process of capturing (recording) a motion picture using digital image sensors rather than through film stock. As digital technology has improved in recent years, this practice has become dominant. Since the 2000s, most movies across the world have been captured as well as distributed digitally. Many vendors have brought products to market, including traditional film camera vendors like Arri and Panavision, as well as new vendors like Red, Blackmagic, Silicon Imaging, Vision Research and companies which have traditionally focused on consumer and broadcast video equipment, like Sony, GoPro, and Panasonic. As of 2023, professional 4K digital cameras were approximately equal to 35mm film in their resolution and dynamic range capacity. Some filmmakers still prefer to use film picture formats to achieve the desired results. == History == The basis for digital cameras are metal–oxide–semiconductor (MOS) image sensors. The first practical semiconductor image sensor was the charge-coupled device (CCD), based on MOS capacitor technology. Following the commercialization of CCD sensors during the late 1970s to early 1980s, the entertainment industry slowly began transitioning to digital imaging and digital video over the next two decades. The CCD was followed by the CMOS active-pixel sensor (CMOS sensor), developed in the 1990s. Beginning in the late 1980s, Sony began marketing the concept of "electronic cinematography," utilizing its analog Sony HDVS professional video cameras. The effort met with very little success. However, this led to one of the earliest high definition video shot feature movies, Julia and Julia (1987). Rainbow (1996) was the world's first film to utilize extensive digital post production techniques. Shot entirely with Sony's first Solid State Electronic Cinematography cameras and featuring over 35 minutes of digital image processing and visual effects, all post production, sound effects, editing and scoring were completed digitally. The Digital High Definition image was transferred to a 35mm negative via an electron beam recorder for theatrical release. The first digitally videoed and post produced feature was Windhorse, shot in Tibet and Nepal in 1996 on the Sony DVW-700WS Digital Betacam and the prosumer Sony DCR-VX1000. The offline editing (Avid) and the online post and color work (Roland House / da Vinci) were also all digital. The film, transferred to 35mm negative for theatrical release, won Best U.S. Feature at the Santa Barbara Film Festival in 1998. In 1997, with the introduction of HDCAM recorders and 1920 × 1080 pixel digital professional video cameras based on CCD technology, the idea, now re-branded as "digital cinematography," began to gain traction in the market. Shot and released in 1998, The Last Broadcast is believed by some to be the first feature-length video shot and edited entirely on consumer-level digital equipment. In May 1999, George Lucas challenged the supremacy of the movie-making medium of film for the first time by including footage filmed with high-definition digital cameras in Star Wars: Episode I – The Phantom Menace. The digital footage blended seamlessly with the footage shot on film and he announced later that year he would film its sequels entirely on hi-def digital video. Also in 1999, digital projectors were installed in four theaters for the showing of The Phantom Menace. In May 2000, Vidocq, which was directed by Pitof, began principal photography shot entirely using a Sony HDW-F900 camera, with the video being released in September the next year. According to the Guinness World Records, Vidocq is the first full length feature filmed in digital high resolution. In June 2000, Star Wars: Episode II – Attack of the Clones began principal photography shot entirely using a Sony HDW-F900 camera as Lucas had previously stated. The film was released in May 2002. In May 2001 Once Upon a Time in Mexico was also shot in 24 frame-per-second high-definition digital video, partially developed by George Lucas using a Sony HDW-F900 camera, following Robert Rodriguez's introduction to the camera at Lucas' Skywalker Ranch facility whilst editing the sound for Spy Kids. A lesser-known movie, Russian Ark (2002), was also shot with the same camera and was the first tapeless digital movie, recorded on HDD instead of tape. In 2009, Slumdog Millionaire became the first movie shot mainly in digital to be awarded the Academy Award for Best Cinematography. The highest-grossing movie in the history of cinema, Avatar (2009), not only was shot on digital cameras as well, but also made the main revenues at the box office no longer by film, but digital projection. Major movies shot on digital video overtook those shot on film in 2013. Since 2016 over 90% of major films were shot on digital video. As of 2017, 92% of films are shot on digital. Only 24 major films released in 2018 were shot on 35mm. Since the 2000s, most movies across the world have been captured as well as distributed digitally. Today, cameras from companies like Sony, Panasonic, JVC and Canon offer a variety of choices for shooting high-definition video. At the high-end of the market, there has been an emergence of cameras aimed specifically at the digital cinema market. These cameras from Sony, Vision Research, Arri, Blackmagic Design, Panavision, Grass Valley and Red offer resolution and dynamic range that exceeds that of traditional video cameras, which are designed for the limited needs of broadcast television. == Technology == Digital cinematography captures motion pictures digitally in a process analogous to digital photography. While there is a clear technical distinction that separates the images captured in digital cinematography from video, the term "digital cinematography" is usually applied only in cases where digital acquisition is substituted for film acquisition, such as when shooting a feature film. The term is seldom applied when digital acquisition is substituted for video acquisition, as with live broadcast television programs. === Recording === ==== Cameras ==== Professional cameras include the Sony CineAlta (F) Series, Blackmagic Cinema Camera, Red One, Arri D-20, D-21 and Alexa, Panavision Genesis, Silicon Imaging SI-2K, Thomson Viper, Vision Research Phantom, IMAX 3D camera based on two Vision Research Phantom cores, Weisscam HS-1 and HS-2, GS Vitec noX, and the Fusion Camera System. Independent micro-budget filmmakers have also pressed low-cost consumer and prosumer cameras into service for digital filmmaking. Flagship smartphones like the Apple iPhone have been used to shoot movies like Unsane (shot on the iPhone 7 Plus) and Tangerine (shot on three iPhone 5S phones) and in January 2018, Unsane's director and Oscar winner Steven Soderbergh expressed an interest in filming other productions solely with iPhones going forward. ==== Sensors ==== Digital cinematography cameras capture digital images using image sensors, either charge-coupled device (CCD) sensors or CMOS active-pixel sensors, usually in one of two arrangements. Single chip cameras designed specifically for the digital cinematography market often use a single sensor (much like digital photo cameras), with dimensions similar in size to a 16 or 35 mm film frame or even (as with the Vision 65) a 65 mm film frame. An image can be projected onto a single large sensor exactly the same way it can be projected onto a film frame, so cameras with this design can be made with PL, PV and similar mounts, in order to use the wide range of existing high-end cinematography lenses available. Their large sensors also let these cameras achieve the same shallow depth of field as 35 or 65 mm motion picture film cameras, which many cinematographers consider an essential visual tool. Codecs Professional raw video recording codecs include Blackmagic Raw, Red Raw, Arri Raw and Canon Raw. ==== Video formats ==== Unlike other video formats, which are specified in terms of vertical resolution (for example, 1080p, which is 1920×1080 pixels), digital cinema formats are usually specified in terms of horizontal resolution. As a shorthand, these resolutions are often given in "nK" notation, where n is the multiplier of 1024 such that the horizontal resolution of a corresponding full-aperture, digitized film frame is exactly 1024 n {\displaystyle 1024n} pixels. Here the "K" has a customary meaning corresponding to the binary prefix "kibi" (ki). For instance, a 2K image is 2048 pixels wide, and a 4K image is 4096 pixels wide. Vertical resolutions vary with aspect ratios though; so a 2K image with an HDTV (16:9) aspect ratio is 2048×1152 pixels, while a 2K image with a SDTV or Academy ratio (4:3) is 2048×1536 pixels, and one with a Panavision ratio (2.39:1) would be 2048×856 pixels, and so on. Due to the "nK" notation not corresponding to specific horizontal resolutions per format a 2K image lacking, for example, the typical 35mm film soundtrack space, is only 182

  Read more →
• 

  HTTP cookie

  An HTTP cookie (also called web cookie, Internet cookie, browser cookie, or simply cookie) is a small block of data created by a web server while a user is browsing a website and placed on the user's computer or other device by the user's web browser. Cookies are placed on the device used to access a website, and more than one cookie may be placed on a user's device during a session. Cookies serve useful and sometimes essential functions on the web. They enable web servers to store stateful information (such as items added in the shopping cart in an online store) on the user's device or to track the user's browsing activity (including clicking particular buttons, logging in, or recording which pages were visited in the past). They can also be used to save information that the user previously entered into form fields, such as names, addresses, passwords, and payment card numbers for subsequent use. Authentication cookies are commonly used by web servers to authenticate that a user is logged in, and with which account they are logged in. Without the cookie, users would need to authenticate themselves by logging in on each page containing sensitive information that they wish to access. The security of an authentication cookie generally depends on the security of the issuing website and the user's web browser, and on whether the cookie data is encrypted. Security vulnerabilities may allow a cookie's data to be read by an attacker, used to gain access to user data, or used to gain access (with the user's credentials) to the website to which the cookie belongs (see cross-site scripting and cross-site request forgery for examples). Tracking cookies, and especially third-party tracking cookies, are commonly used as ways to compile long-term records of individuals' browsing histories — a potential privacy concern that prompted European and U.S. lawmakers to take action in 2011. European law requires that all websites targeting European Union member states gain "informed consent" from users before storing non-essential cookies on their device. == Background == === Origin of the name === The term cookie was coined by web-browser programmer Lou Montulli. It was derived from the term magic cookie, which is a packet of data a program receives and sends back unchanged, used by Unix programmers. === History === Magic cookies were already used in computing when computer programmer Lou Montulli had the idea of using them in web communications in June 1994. At the time, he was an employee of Netscape Communications, which was developing an e-commerce application for MCI. Vint Cerf and John Klensin represented MCI in technical discussions with Netscape Communications. MCI did not want its servers to have to retain partial transaction states, which led them to ask Netscape to find a way to store that state in each user's computer instead. Cookies provided a solution to the problem of reliably implementing a virtual shopping cart. Together with John Giannandrea, Montulli wrote the initial Netscape cookie specification the same year. Version 0.9beta of Mosaic Netscape, released on 13 October 1994, supported cookies. The first use of cookies (out of the labs) was checking whether visitors to the Netscape website had already visited the site. Montulli applied for a patent for the cookie technology in 1995, which was granted in 1998. Support for cookies was integrated with Internet Explorer in version 2, released in October 1995. The introduction of cookies was not widely known to the public at the time. In particular, cookies were accepted by default, and users were not notified of their presence. The public learned about cookies after the Financial Times published an article about them on 12 February 1996. In the same year, cookies received a lot of media attention, especially because of potential privacy implications. Cookies were discussed in two U.S. Federal Trade Commission hearings in 1996 and 1997. The development of the formal cookie specifications was already ongoing. In particular, the first discussions about a formal specification started in April 1995 on the www-talk mailing list. A special working group within the Internet Engineering Task Force (IETF) was formed. Two alternative proposals for introducing state in HTTP transactions had been proposed by Brian Behlendorf and David Kristol respectively. But the group, headed by Kristol himself and Lou Montulli, soon decided to use the Netscape specification as a starting point. In February 1996, the working group identified third-party cookies as a considerable privacy threat. The specification produced by the group was eventually published as RFC 2109 in February 1997. It specifies that third-party cookies were either not allowed at all, or at least not enabled by default. At this time, advertising companies were already using third-party cookies. The recommendation about third-party cookies of RFC 2109 was not followed by Netscape and Internet Explorer. RFC 2109 was superseded by RFC 2965 in October 2000. RFC 2965 added a Set-Cookie2 header field, which informally came to be called "RFC 2965-style cookies" as opposed to the original Set-Cookie header field which was called "Netscape-style cookies". Set-Cookie2 was seldom used, however, and was deprecated in RFC 6265 in April 2011 which was written as a definitive specification for cookies as used in the real world. No modern browser recognizes the Set-Cookie2 header field. == Terminology == === Session cookie === A session cookie (also known as an in-memory cookie, transient cookie or non-persistent cookie) exists only in temporary memory while the user navigates a website. Session cookies expire or are deleted when the user closes the web browser. Session cookies are identified by the browser by the absence of an expiration date assigned to them. === Persistent cookie === A persistent cookie expires at a specific date or after a specific length of time. For the persistent cookie's lifespan set by its creator, its information will be transmitted to the server every time the user visits the website that it belongs to, or every time the user views a resource belonging to that website from another website (such as an advertisement). For this reason, persistent cookies are sometimes referred to as tracking cookies because they can be used by advertisers to record information about a user's web browsing habits over an extended period of time. Persistent cookies are also used for reasons such as keeping users logged into their accounts on websites, to avoid re-entering login credentials at every visit. (See § Uses, below.) === Secure cookie === A secure cookie can only be transmitted over an encrypted connection (i.e. HTTPS). They cannot be transmitted over unencrypted connections (i.e. HTTP). This makes the cookie less likely to be exposed to cookie theft via eavesdropping. A cookie is made secure by adding the Secure flag to the cookie. === Http-only cookie === An http-only cookie cannot be accessed by client-side APIs, such as JavaScript. This restriction eliminates the threat of cookie theft via cross-site scripting (XSS). However, the cookie remains vulnerable to cross-site tracing (XST) and cross-site request forgery (CSRF) attacks. A cookie is given this characteristic by adding the HttpOnly flag to the cookie. === Same-site cookie === In 2016 Google Chrome version 51 introduced a new kind of cookie with attribute SameSite with possible values of Strict, Lax or None. With attribute SameSite=Strict, the browsers would only send cookies to a target domain that is the same as the origin domain. This would effectively mitigate cross-site request forgery (CSRF) attacks. With SameSite=Lax, browsers would send cookies with requests to a target domain even it is different from the origin domain, but only for safe requests such as GET (POST is unsafe) and not third-party cookies (inside iframe). Attribute SameSite=None would allow third-party (cross-site) cookies, however, most browsers require secure attribute on SameSite=None cookies. The Same-site cookie is incorporated into a new RFC draft for "Cookies: HTTP State Management Mechanism" to update RFC 6265 (if approved). Chrome, Firefox, and Edge started to support Same-site cookies. The key of rollout is the treatment of existing cookies without the SameSite attribute defined, Chrome has been treating those existing cookies as if SameSite=None, this would let all website/applications run as before. Google intended to change that default to SameSite=Lax in Chrome 80 planned to be released in February 2020, but due to potential for breakage of those applications/websites that rely on third-party/cross-site cookies and COVID-19 circumstances, Google postponed this change to Chrome 84. === Supercookie === A supercookie is a cookie with an origin of a top-level domain (such as .com) or a public suffix (such as .co.uk). Ordinary cookies, by contrast, have an origin of a specific domain name, such as ex

  Read more →