AI Face Look

AI Face Look — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Screen space ambient occlusion

    Screen space ambient occlusion

    Screen space ambient occlusion (SSAO) is a computer graphics technique for efficiently approximating the ambient occlusion effect in real time. It was developed by Vladimir Kajalin while working at Crytek and was used for the first time in 2007 by the video game Crysis, also developed by Crytek. == Implementation == The algorithm is implemented as a pixel shader, analyzing the scene depth buffer which is stored in a texture. For every pixel on the screen, the pixel shader samples the depth values around the current pixel and tries to compute the amount of occlusion from each of the sampled points. In its simplest implementation, the occlusion factor depends only on the depth difference between sampled point and current point. Without additional smart solutions, such a brute force method would require about 200 texture reads per pixel for good visual quality. This is not acceptable for real-time rendering on current graphics hardware. In order to get high quality results with far fewer reads, sampling is performed using a randomly rotated kernel. The kernel orientation is repeated every N screen pixels in order to have only high-frequency noise in the final picture. In the end this high frequency noise is greatly removed by a NxN post-process blurring step taking into account depth discontinuities (using methods such as comparing adjacent normals and depths). Such a solution allows a reduction in the number of depth samples per pixel to about 16 or fewer while maintaining a high quality result, and allows the use of SSAO in soft real-time applications like computer games. Compared to other ambient occlusion solutions, SSAO has the following advantages: Independent from scene complexity. No data pre-processing needed, no loading time and no memory allocations in system memory. Works with dynamic scenes. Works in the same consistent way for every pixel on the screen. No CPU usage – it can be executed completely on the GPU. May be easily integrated into any modern graphics pipeline. SSAO also has the following disadvantages: Rather local and in many cases view-dependent, as it is dependent on adjacent texel depths which may be generated by any geometry whatsoever. Hard to correctly smooth/blur out the noise without interfering with depth discontinuities, such as object edges (the occlusion should not "bleed" onto objects). Because SSAO operates only on the current depth buffer, it can miss occluding geometry that is not rasterized into the z-buffer and may produce undersampling-related artifacts.

    Read more →
  • Locality-sensitive hashing

    Locality-sensitive hashing

    In computer science, locality-sensitive hashing (LSH) is a fuzzy hashing technique that hashes similar input items into the same "buckets" with high probability. The number of buckets is much smaller than the universe of possible input items. Since similar items end up in the same buckets, this technique can be used for data clustering and nearest neighbor search. It differs from conventional hashing techniques in that hash collisions are maximized, not minimized. Alternatively, the technique can be seen as a way to reduce the dimensionality of high-dimensional data; high-dimensional input items can be reduced to low-dimensional versions while preserving relative distances between items. Hashing-based approximate nearest-neighbor search algorithms generally use one of two main categories of hashing methods: either data-independent methods, such as locality-sensitive hashing (LSH); or data-dependent methods, such as locality-preserving hashing (LPH). Locality-preserving hashing was initially devised as a way to facilitate data pipelining in implementations of massively parallel algorithms that use randomized routing and universal hashing to reduce memory contention and network congestion. == Definitions == A finite family F {\displaystyle {\mathcal {F}}} of functions h : M → S {\displaystyle h\colon M\to S} is defined to be an LSH family for a metric space M = ( M , d ) {\displaystyle {\mathcal {M}}=(M,d)} , a threshold r > 0 {\displaystyle r>0} , an approximation factor c > 1 {\displaystyle c>1} , and probabilities p 1 > p 2 {\displaystyle p_{1}>p_{2}} if it satisfies the following condition. For any two points a , b ∈ M {\displaystyle a,b\in M} and a hash function h {\displaystyle h} chosen uniformly at random from F {\displaystyle {\mathcal {F}}} : If d ( a , b ) ≤ r {\displaystyle d(a,b)\leq r} , then h ( a ) = h ( b ) {\displaystyle h(a)=h(b)} (i.e., a and b collide) with probability at least p 1 {\displaystyle p_{1}} , If d ( a , b ) ≥ c r {\displaystyle d(a,b)\geq cr} , then h ( a ) = h ( b ) {\displaystyle h(a)=h(b)} with probability at most p 2 {\displaystyle p_{2}} . Such a family F {\displaystyle {\mathcal {F}}} is called ( r , c r , p 1 , p 2 ) {\displaystyle (r,cr,p_{1},p_{2})} -sensitive. === LSH with respect to a similarity measure === Alternatively it is possible to define an LSH family on a universe of items U endowed with a similarity function ϕ : U × U → [ 0 , 1 ] {\displaystyle \phi \colon U\times U\to [0,1]} . In this setting, a LSH scheme is a family of hash functions H coupled with a probability distribution D over H such that a function h ∈ H {\displaystyle h\in H} chosen according to D satisfies P r [ h ( a ) = h ( b ) ] = ϕ ( a , b ) {\displaystyle Pr[h(a)=h(b)]=\phi (a,b)} for each a , b ∈ U {\displaystyle a,b\in U} . === Amplification === Given a ( d 1 , d 2 , p 1 , p 2 ) {\displaystyle (d_{1},d_{2},p_{1},p_{2})} -sensitive family F {\displaystyle {\mathcal {F}}} , we can construct new families G {\displaystyle {\mathcal {G}}} by either the AND-construction or OR-construction of F {\displaystyle {\mathcal {F}}} . To create an AND-construction, we define a new family G {\displaystyle {\mathcal {G}}} of hash functions g, where each function g is constructed from k random functions h 1 , … , h k {\displaystyle h_{1},\ldots ,h_{k}} from F {\displaystyle {\mathcal {F}}} . We then say that for a hash function g ∈ G {\displaystyle g\in {\mathcal {G}}} , g ( x ) = g ( y ) {\displaystyle g(x)=g(y)} if and only if all h i ( x ) = h i ( y ) {\displaystyle h_{i}(x)=h_{i}(y)} for i = 1 , 2 , … , k {\displaystyle i=1,2,\ldots ,k} . Since the members of F {\displaystyle {\mathcal {F}}} are independently chosen for any g ∈ G {\displaystyle g\in {\mathcal {G}}} , G {\displaystyle {\mathcal {G}}} is a ( d 1 , d 2 , p 1 k , p 2 k ) {\displaystyle (d_{1},d_{2},p_{1}^{k},p_{2}^{k})} -sensitive family. To create an OR-construction, we define a new family G {\displaystyle {\mathcal {G}}} of hash functions g, where each function g is constructed from k random functions h 1 , … , h k {\displaystyle h_{1},\ldots ,h_{k}} from F {\displaystyle {\mathcal {F}}} . We then say that for a hash function g ∈ G {\displaystyle g\in {\mathcal {G}}} , g ( x ) = g ( y ) {\displaystyle g(x)=g(y)} if and only if h i ( x ) = h i ( y ) {\displaystyle h_{i}(x)=h_{i}(y)} for one or more values of i. Since the members of F {\displaystyle {\mathcal {F}}} are independently chosen for any g ∈ G {\displaystyle g\in {\mathcal {G}}} , G {\displaystyle {\mathcal {G}}} is a ( d 1 , d 2 , 1 − ( 1 − p 1 ) k , 1 − ( 1 − p 2 ) k ) {\displaystyle (d_{1},d_{2},1-(1-p_{1})^{k},1-(1-p_{2})^{k})} -sensitive family. == Applications == LSH has been applied to several problem domains, including: Near-duplicate detection Hierarchical clustering Genome-wide association study Image similarity identification VisualRank Gene expression similarity identification Audio similarity identification Nearest neighbor search Audio fingerprint Digital video fingerprinting Shared memory organization in parallel computing Physical data organization in database management systems Training fully connected neural networks Computer security Machine learning == Methods == === Bit sampling for Hamming distance === One of the easiest ways to construct an LSH family is by bit sampling. This approach works for the Hamming distance over d-dimensional vectors { 0 , 1 } d {\displaystyle \{0,1\}^{d}} . Here, the family F {\displaystyle {\mathcal {F}}} of hash functions is simply the family of all the projections of points on one of the d {\displaystyle d} coordinates, i.e., F = { h : { 0 , 1 } d → { 0 , 1 } ∣ h ( x ) = x i for some i ∈ { 1 , … , d } } {\displaystyle {\mathcal {F}}=\{h\colon \{0,1\}^{d}\to \{0,1\}\mid h(x)=x_{i}{\text{ for some }}i\in \{1,\ldots ,d\}\}} , where x i {\displaystyle x_{i}} is the i {\displaystyle i} th coordinate of x {\displaystyle x} . A random function h {\displaystyle h} from F {\displaystyle {\mathcal {F}}} simply selects a random bit from the input point. This family has the following parameters: P 1 = 1 − R / d {\displaystyle P_{1}=1-R/d} , P 2 = 1 − c R / d {\displaystyle P_{2}=1-cR/d} . That is, any two vectors x , y {\displaystyle x,y} with Hamming distance at most R {\displaystyle R} collide under a random h {\displaystyle h} with probability at least P 1 {\displaystyle P_{1}} . Any x , y {\displaystyle x,y} with Hamming distance at least c R {\displaystyle cR} collide with probability at most P 2 {\displaystyle P_{2}} . === Min-wise independent permutations === Suppose U is composed of subsets of some ground set of enumerable items S and the similarity function of interest is the Jaccard index J. If π is a permutation on the indices of S, for A ⊆ S {\displaystyle A\subseteq S} let h ( A ) = min a ∈ A { π ( a ) } {\displaystyle h(A)=\min _{a\in A}\{\pi (a)\}} . Each possible choice of π defines a single hash function h mapping input sets to elements of S. Define the function family H to be the set of all such functions and let D be the uniform distribution. Given two sets A , B ⊆ S {\displaystyle A,B\subseteq S} the event that h ( A ) = h ( B ) {\displaystyle h(A)=h(B)} corresponds exactly to the event that the minimizer of π over A ∪ B {\displaystyle A\cup B} lies inside A ∩ B {\displaystyle A\cap B} . As h was chosen uniformly at random, P r [ h ( A ) = h ( B ) ] = J ( A , B ) {\displaystyle Pr[h(A)=h(B)]=J(A,B)\,} and ( H , D ) {\displaystyle (H,D)\,} define an LSH scheme for the Jaccard index. Because the symmetric group on n elements has size n!, choosing a truly random permutation from the full symmetric group is infeasible for even moderately sized n. Because of this fact, there has been significant work on finding a family of permutations that is "min-wise independent" — a permutation family for which each element of the domain has equal probability of being the minimum under a randomly chosen π. It has been established that a min-wise independent family of permutations is at least of size lcm ⁡ { 1 , 2 , … , n } ≥ e n − o ( n ) {\displaystyle \operatorname {lcm} \{\,1,2,\ldots ,n\,\}\geq e^{n-o(n)}} , and that this bound is tight. Because min-wise independent families are too big for practical applications, two variant notions of min-wise independence are introduced: restricted min-wise independent permutations families, and approximate min-wise independent families. Restricted min-wise independence is the min-wise independence property restricted to certain sets of cardinality at most k. Approximate min-wise independence differs from the property by at most a fixed ε. === Open source methods === ==== Nilsimsa Hash ==== Nilsimsa is a locality-sensitive hashing algorithm used in anti-spam efforts. The goal of Nilsimsa is to generate a hash digest of an email message such that the digests of two similar messages are similar to each other. The paper suggests that the Nilsimsa satisfies three requirements: The digest identifying each message should not

    Read more →
  • Bayesian hierarchical modeling

    Bayesian hierarchical modeling

    Bayesian hierarchical modelling is a statistical model written in multiple levels (hierarchical form) that estimates the posterior distribution of model parameters using the Bayesian method. The sub-models combine to form the hierarchical model, and Bayes' theorem is used to integrate them with the observed data and account for all the uncertainty that is present. This integration enables calculation of updated posterior over the (hyper)parameters, effectively updating prior beliefs in light of the observed data. Frequentist statistics may yield conclusions seemingly incompatible with those offered by Bayesian statistics due to the Bayesian treatment of the parameters as random variables and its use of subjective information in establishing assumptions on these parameters. As the approaches answer different questions the formal results are not technically contradictory but the two approaches disagree over which answer is relevant to particular applications. Bayesians argue that relevant information regarding decision-making and updating beliefs cannot be ignored and that hierarchical modeling has the potential to overrule classical methods in applications where respondents give multiple observational data. Moreover, the model has proven to be robust, with the posterior distribution less sensitive to the more flexible hierarchical priors. Hierarchical modeling, as its name implies, retains nested data structure, and is used when information is available at several different levels of observational units. For example, in epidemiological modeling to describe infection trajectories for multiple countries, observational units are countries, and each country has its own time-based profile of daily infected cases. In decline curve analysis to describe oil or gas production decline curve for multiple wells, observational units are oil or gas wells in a reservoir region, and each well has each own time-based profile of oil or gas production rates (usually, barrels per month). Hierarchical modeling is used to devise computation based strategies for multiparameter problems. == Philosophy == Statistical methods and models commonly involve multiple parameters that can be regarded as related or connected in such a way that the problem implies a dependence of the joint probability model for these parameters. Individual degrees of belief, expressed in the form of probabilities, come with uncertainty. Amidst this is the change of the degrees of belief over time. As was stated by Professor José M. Bernardo and Professor Adrian F. Smith, "The actuality of the learning process consists in the evolution of individual and subjective beliefs about the reality." These subjective probabilities are more directly involved in the mind rather than the physical probabilities. Hence, it is with this need of updating beliefs that Bayesians have formulated an alternative statistical model which takes into account the prior occurrence of a particular event. == Bayes' theorem == The assumed occurrence of a real-world event will typically modify preferences between certain options. This is done by modifying the degrees of belief attached, by an individual, to the events defining the options. Suppose in a study of the effectiveness of cardiac treatments, with the patients in hospital j having survival probability θ j {\displaystyle \theta _{j}} , the survival probability will be updated with the occurrence of y, the event in which a controversial serum is created which, as believed by some, increases survival in cardiac patients. In order to make updated probability statements about θ j {\displaystyle \theta _{j}} , given the occurrence of event y, we must begin with a model providing a joint probability distribution for θ j {\displaystyle \theta _{j}} and y. This can be written as a product of the two distributions that are often referred to as the prior distribution P ( θ ) {\displaystyle P(\theta )} and the sampling distribution P ( y ∣ θ ) {\displaystyle P(y\mid \theta )} respectively: P ( θ , y ) = P ( θ ) P ( y ∣ θ ) {\displaystyle P(\theta ,y)=P(\theta )P(y\mid \theta )} Using the basic property of conditional probability, the posterior distribution will yield: P ( θ ∣ y ) = P ( θ , y ) P ( y ) = P ( y ∣ θ ) P ( θ ) P ( y ) {\displaystyle P(\theta \mid y)={\frac {P(\theta ,y)}{P(y)}}={\frac {P(y\mid \theta )P(\theta )}{P(y)}}} This equation, showing the relationship between the conditional probability and the individual events, is known as Bayes' theorem. This simple expression encapsulates the technical core of Bayesian inference which aims to deconstruct the probability, P ( θ ∣ y ) {\displaystyle P(\theta \mid y)} , relative to solvable subsets of its supportive evidence. == Exchangeability == The usual starting point of a statistical analysis is the assumption that the n values y 1 , y 2 , … , y n {\displaystyle y_{1},y_{2},\ldots ,y_{n}} are exchangeable. If no information – other than data y – is available to distinguish any of the θ j {\displaystyle \theta _{j}} 's from any others, and no ordering or grouping of the parameters can be made, one must assume symmetry of prior distribution parameters. This symmetry is represented probabilistically by exchangeability. Generally, it is useful and appropriate to model data from an exchangeable distribution as independently and identically distributed, given some unknown parameter vector θ {\displaystyle \theta } , with distribution P ( θ ) {\displaystyle P(\theta )} . === Finite exchangeability === For a fixed number n, the set y 1 , y 2 , … , y n {\displaystyle y_{1},y_{2},\ldots ,y_{n}} is exchangeable if the joint probability P ( y 1 , y 2 , … , y n ) {\displaystyle P(y_{1},y_{2},\ldots ,y_{n})} is invariant under permutations of the indices. That is, for every permutation π {\displaystyle \pi } or ( π 1 , π 2 , … , π n ) {\displaystyle (\pi _{1},\pi _{2},\ldots ,\pi _{n})} of (1, 2, …, n), P ( y 1 , y 2 , … , y n ) = P ( y π 1 , y π 2 , … , y π n ) . {\displaystyle P(y_{1},y_{2},\ldots ,y_{n})=P(y_{\pi _{1}},y_{\pi _{2}},\ldots ,y_{\pi _{n}}).} The following is an exchangeable, but not independent and identical (iid), example: Consider an urn with a red ball and a blue ball inside, with probability 1 2 {\displaystyle {\frac {1}{2}}} of drawing either. Balls are drawn without replacement, i.e. after one ball is drawn from the n {\displaystyle n} balls, there will be n − 1 {\displaystyle n-1} remaining balls left for the next draw. Let Y i = { 1 , if the i th ball is red , 0 , otherwise . {\displaystyle {\text{Let }}Y_{i}={\begin{cases}1,&{\text{if the }}i{\text{th ball is red}},\\0,&{\text{otherwise}}.\end{cases}}} The probability of selecting a red ball in the first draw and a blue ball in the second draw is equal to the probability of selecting a blue ball on the first draw and a red on the second, both of which are 1/2: P ( y 1 = 1 , y 2 = 0 ) = P ( y 1 = 0 , y 2 = 1 ) = 1 2 {\displaystyle P(y_{1}=1,y_{2}=0)=P(y_{1}=0,y_{2}=1)={\frac {1}{2}}} . This makes y 1 {\displaystyle y_{1}} and y 2 {\displaystyle y_{2}} exchangeable. But the probability of selecting a red ball on the second draw given that the red ball has already been selected in the first is 0. This is not equal to the probability that the red ball is selected in the second draw, which is 1/2: P ( y 2 = 1 ∣ y 1 = 1 ) = 0 ≠ P ( y 2 = 1 ) = 1 2 {\displaystyle P(y_{2}=1\mid y_{1}=1)=0\neq P(y_{2}=1)={\frac {1}{2}}} . Thus, y 1 {\displaystyle y_{1}} and y 2 {\displaystyle y_{2}} are not independent. If x 1 , … , x n {\displaystyle x_{1},\ldots ,x_{n}} are independent and identically distributed, then they are exchangeable, but the converse is not necessarily true. === Infinite exchangeability === Infinite exchangeability is the property that every finite subset of an infinite sequence y 1 {\displaystyle y_{1}} , y 2 , … {\displaystyle y_{2},\ldots } is exchangeable. For any n, the sequence y 1 , y 2 , … , y n {\displaystyle y_{1},y_{2},\ldots ,y_{n}} is exchangeable. == Hierarchical models == === Components === Bayesian hierarchical modeling makes use of two important concepts in deriving the posterior distribution, namely: Hyperparameters: parameters of the prior distribution Hyperpriors: distributions of Hyperparameters Suppose a random variable Y follows a normal distribution with parameter θ {\displaystyle \theta } as the mean and 1 as the variance, that is Y ∣ θ ∼ N ( θ , 1 ) {\displaystyle Y\mid \theta \sim N(\theta ,1)} . The tilde relation ∼ {\displaystyle \sim } can be read as "has the distribution of" or "is distributed as". Suppose also that the parameter θ {\displaystyle \theta } has a distribution given by a normal distribution with mean μ {\displaystyle \mu } and variance 1, i.e. θ ∣ μ ∼ N ( μ , 1 ) {\displaystyle \theta \mid \mu \sim N(\mu ,1)} . Furthermore, μ {\displaystyle \mu } follows another distribution given, for example, by the standard normal distribution, N ( 0 , 1 ) {\displaystyle {\text{N}}(0,1)} . The parameter μ {\dis

    Read more →
  • Q-learning

    Q-learning

    Q-learning is a reinforcement learning algorithm that trains an agent to assign values to its possible actions based on its current state, without requiring a model of the environment (model-free). It can handle problems with stochastic transitions and rewards without requiring adaptations. For example, in a grid maze, an agent learns to reach an exit worth 10 points. At a junction, Q-learning might assign a higher value to moving right than left if right gets to the exit faster, improving this choice by trying both directions over time. For any finite Markov decision process, Q-learning finds an optimal policy in the sense of maximizing the expected value of the total reward over any and all successive steps, starting from the current state. Q-learning can identify an optimal action-selection policy for any given finite Markov decision process, given infinite exploration time and a partly random policy. "Q" refers to the function that the algorithm computes: the expected reward—that is, the quality—of an action taken in a given state. == Reinforcement learning == Reinforcement learning involves an agent, a set of states S {\displaystyle {\mathcal {S}}} , and a set A {\displaystyle {\mathcal {A}}} of actions per state. By performing an action a ∈ A {\displaystyle a\in {\mathcal {A}}} , the agent transitions from state to state. Executing an action in a specific state provides the agent with a reward (a numerical score). The goal of the agent is to maximize its total reward. It does this by adding the maximum reward attainable from future states to the reward for achieving its current state, effectively influencing the current action by the potential future reward. This potential reward is a weighted sum of expected values of the rewards of all future steps starting from the current state. As an example, consider the process of boarding a train, in which the reward is measured by the negative of the total time spent boarding (alternatively, the cost of boarding the train is equal to the boarding time). One strategy is to enter the train door as soon as they open, minimizing the initial wait time for yourself. If the train is crowded, however, then you will have a slow entry after the initial action of entering the door as people are fighting you to depart the train as you attempt to board. The total boarding time, or cost, is then: 0 seconds wait time + 15 seconds fight time On the next day, by random chance (exploration), you decide to wait and let other people depart first. This initially results in a longer wait time. However, less time is spent fighting the departing passengers. Overall, this path has a higher reward than that of the previous day, since the total boarding time is now: 5 second wait time + 0 second fight time Through exploration, despite the initial (patient) action resulting in a larger cost (or negative reward) than in the forceful strategy, the overall cost is lower, thus revealing a more rewarding strategy. == Algorithm == After Δ t {\displaystyle \Delta t} steps into the future the agent will decide some next step. The weight for this step is calculated as γ Δ t {\displaystyle \gamma ^{\Delta t}} , where γ {\displaystyle \gamma } (the discount factor) is a number between 0 and 1 ( 0 ≤ γ ≤ 1 {\displaystyle 0\leq \gamma \leq 1} ). Assuming γ < 1 {\displaystyle \gamma <1} , it has the effect of valuing rewards received earlier higher than those received later (reflecting the value of a "good start"). γ {\displaystyle \gamma } may also be interpreted as the probability to succeed (or survive) at every step Δ t {\displaystyle \Delta t} . The algorithm, therefore, has a function that calculates the quality of a state–action combination: Q : S × A → R {\displaystyle Q:{\mathcal {S}}\times {\mathcal {A}}\to \mathbb {R} } . Before learning begins, ⁠ Q {\displaystyle Q} ⁠ is initialized to a possibly arbitrary fixed value (chosen by the programmer). Then, at each time t {\displaystyle t} the agent selects an action A t {\displaystyle A_{t}} , observes a reward R t + 1 {\displaystyle R_{t+1}} , enters a new state S t + 1 {\displaystyle S_{t+1}} (that may depend on both the previous state S t {\displaystyle S_{t}} and the selected action), and Q {\displaystyle Q} is updated. The core of the algorithm is a Bellman equation as a simple value iteration update, using the weighted average of the current value and the new information: Q n e w ( S t , A t ) ← ( 1 − α ⏟ learning rate ) ⋅ Q ( S t , A t ) ⏟ current value + α ⏟ learning rate ⋅ ( R t + 1 ⏟ reward + γ ⏟ discount factor ⋅ max a Q ( S t + 1 , a ) ⏟ estimate of optimal future value ⏟ new value (temporal difference target) ) {\displaystyle Q^{new}(S_{t},A_{t})\leftarrow (1-\underbrace {\alpha } _{\text{learning rate}})\cdot \underbrace {Q(S_{t},A_{t})} _{\text{current value}}+\underbrace {\alpha } _{\text{learning rate}}\cdot {\bigg (}\underbrace {\underbrace {R_{t+1}} _{\text{reward}}+\underbrace {\gamma } _{\text{discount factor}}\cdot \underbrace {\max _{a}Q(S_{t+1},a)} _{\text{estimate of optimal future value}}} _{\text{new value (temporal difference target)}}{\bigg )}} where R t + 1 {\displaystyle R_{t+1}} is the reward received when moving from the state S t {\displaystyle S_{t}} to the state S t + 1 {\displaystyle S_{t+1}} , and α {\displaystyle \alpha } is the learning rate ( 0 < α ≤ 1 ) {\displaystyle (0<\alpha \leq 1)} . Note that Q n e w ( S t , A t ) {\displaystyle Q^{new}(S_{t},A_{t})} is the sum of three terms: ( 1 − α ) Q ( S t , A t ) {\displaystyle (1-\alpha )Q(S_{t},A_{t})} : the current value (weighted by one minus the learning rate) α R t + 1 {\displaystyle \alpha \,R_{t+1}} : the reward R t + 1 {\displaystyle R_{t+1}} to obtain if action A t {\displaystyle A_{t}} is taken when in state S t {\displaystyle S_{t}} (weighted by learning rate) α γ max a Q ( S t + 1 , a ) {\displaystyle \alpha \gamma \max _{a}Q(S_{t+1},a)} : the maximum reward that can be obtained from state S t + 1 {\displaystyle S_{t+1}} (weighted by learning rate and discount factor) An episode of the algorithm ends when state S t + 1 {\displaystyle S_{t+1}} is a final or terminal state. However, Q-learning can also learn in non-episodic tasks (as a result of the property of convergent infinite series). If the discount factor is lower than 1, the action values are finite even if the problem can contain infinite loops or paths. For all final states s f {\displaystyle s_{f}} , Q ( s f , a ) {\displaystyle Q(s_{f},a)} is never updated, but is set to the reward value r {\displaystyle r} observed for state s f {\displaystyle s_{f}} . In most cases, Q ( s f , a ) {\displaystyle Q(s_{f},a)} can be taken to equal zero. == Influence of variables == === Learning rate === The learning rate or step size determines to what extent newly acquired information overrides old information. A factor of 0 makes the agent learn nothing (exclusively exploiting prior knowledge), while a factor of 1 makes the agent consider only the most recent information (ignoring prior knowledge to explore possibilities). In fully deterministic environments, a learning rate of α t = 1 {\displaystyle \alpha _{t}=1} is optimal. When the problem is stochastic, the algorithm converges under some technical conditions on the learning rate that require it to decrease to zero. In practice, often a constant learning rate is used, such as α t = 0.1 {\displaystyle \alpha _{t}=0.1} for all t {\displaystyle t} . === Discount factor === The discount factor ⁠ γ {\displaystyle \gamma } ⁠ determines the importance of future rewards. A factor of 0 will make the agent "myopic" (or short-sighted) by only considering current rewards, i.e. r t {\displaystyle r_{t}} (in the update rule above), while a factor approaching 1 will make it strive for a long-term high reward. If the discount factor meets or exceeds 1, the action values may diverge. For ⁠ γ = 1 {\displaystyle \gamma =1} ⁠, without a terminal state, or if the agent never reaches one, all environment histories become infinitely long, and utilities with additive, undiscounted rewards generally become infinite. Even with a discount factor only slightly lower than 1, Q-function learning leads to propagation of errors and instabilities when the value function is approximated with an artificial neural network. In that case, starting with a lower discount factor and increasing it towards its final value accelerates learning. === Initial conditions (Q0) === Since Q-learning is an iterative algorithm, it implicitly assumes an initial condition before the first update occurs. High initial values, also known as "optimistic initial conditions", can encourage exploration: no matter what action is selected, the update rule will cause it to have lower values than the other alternative, thus increasing their choice probability. The first reward r {\displaystyle r} can be used to reset the initial conditions. According to this idea, the first time an action is taken the reward is used to set the value

    Read more →
  • Security switch

    Security switch

    A security switch is a hardware device designed to protect computers, laptops, smartphones and similar devices from unauthorized access or operation, distinct from a virtual security switch which offers software protection. Security switches should be operated by an authorized user only; for this reason, it should be isolated from other devices, in order to prevent unauthorized access, and it should not be possible to bypass it, in order to prevent malicious manipulation. The primary purpose of a security switch is to provide protection against surveillance, eavesdropping, malware, spyware, and theft of digital devices. Unlike other protections or techniques, a security switch can provide protection even if security has already been breached, since it does not have any access from other components and is not accessible by software. It can additionally disconnect or block peripheral devices, and perform "man in the middle" operations. A security switch can be used for human presence detection since it can only be initiated by a human operator. It can also be used as a firewall. == Types == === Hardware kill switch === A hardware kill switch (HKS) is a physical switch that cuts the signal or power line to the device or disable the chip running them. == Examples == A cellphone is compromised by malicious software, and the device initiates video and audio recording. When the user activates the “prevent capture of audio/video” mode of the security switch, that either physically disconnects or cut the power to the microphone and the camera, which stops the recording. A laptop that has an embedded security switch is stolen. The security switch detects a lack of communication from a specific external source for 12 hours, and responds by disconnecting the screen, keyboard and other key components, rendering the laptop useless, with no possibility of recovery, even with a full format. A user wishes to prevent tracking of their location. The user then activates geolocation protection and the security switch disables all GPS communication, eliminating the possibility of tracking the device's location. A user desires to eliminate the possibility of their PIN being copied from their smartphone. They can activate the secure input function, causing the security switch to disconnect the touch screen from the operating system, so input signals are not available to any devices except the switch. A security switch performs scheduled monitoring and finds that a program is attempting to download malicious content from the internet. It then activates internet security function and disables internet access, interrupting the download. If laptop software is compromised by air-gap malware, the user may activate the security switch and disconnect the speaker and microphone, so it can not establish communication with the device. == History == Google started to work on a hardware kill switch for AI in 2016. In 2019, Apple, and Google, along with a handful of smaller players, are designing “kill switches” that cut the power to the microphones or cameras in their devices. Googles first product that implemented this is Nest Hub Max. Hardware kill switches are already available and widely tested on the PinePhone, Librem, Shiftphone, to cut power to the input peripherals (microphone, camera) but also the network connectivity modules (wifi, cellular network).

    Read more →
  • Sharpness aware minimization

    Sharpness aware minimization

    Sharpness Aware Minimization (SAM) is an optimization algorithm used in machine learning that aims to improve model generalization. The method seeks to find model parameters that are located in regions of the loss landscape with uniformly low loss values, rather than parameters that only achieve a minimal loss value at a single point. This approach is described as finding "flat" minima instead of "sharp" ones. The rationale is that models trained this way are less sensitive to variations between training and test data, which can lead to better performance on unseen data. The algorithm was introduced in a 2020 paper by a team of researchers including Pierre Foret, Ariel Kleiner, Hossein Mobahi, and Behnam Neyshabur. == Underlying Principle == SAM modifies the standard training objective by minimizing a "sharpness-aware" loss. This is formulated as a minimax problem where the inner objective seeks to find the highest loss value in the immediate neighborhood of the current model weights, and the outer objective minimizes this value: min w max ‖ ϵ ‖ p ≤ ρ L train ( w + ϵ ) + λ ‖ w ‖ 2 2 {\displaystyle \min _{w}\max _{\|\epsilon \|_{p}\leq \rho }L_{\text{train}}(w+\epsilon )+\lambda \|w\|_{2}^{2}} In this formulation: w {\displaystyle w} represents the model's parameters (weights). L train {\displaystyle L_{\text{train}}} is the loss calculated on the training data. ϵ {\displaystyle \epsilon } is a perturbation applied to the weights. ρ {\displaystyle \rho } is a hyperparameter that defines the radius of the neighborhood (an L p {\displaystyle L_{p}} ball) to search for the highest loss. An optional L2 regularization term, scaled by λ {\displaystyle \lambda } , can be included. A direct solution to the inner maximization problem is computationally expensive. SAM approximates it by taking a single gradient ascent step to find the perturbation ϵ {\displaystyle \epsilon } . This is calculated as: ϵ ( w ) = ρ ∇ L train ( w ) ‖ ∇ L train ( w ) ‖ 2 {\displaystyle \epsilon (w)=\rho {\frac {\nabla L_{\text{train}}(w)}{\|\nabla L_{\text{train}}(w)\|_{2}}}} The optimization process for each training step involves two stages. First, an "ascent step" computes a perturbed set of weights, w adv = w + ϵ ( w ) {\displaystyle w_{\text{adv}}=w+\epsilon (w)} , by moving towards the direction of the highest local loss. Second, a "descent step" updates the original weights w {\displaystyle w} using the gradient calculated at these perturbed weights, ∇ L train ( w adv ) {\displaystyle \nabla L_{\text{train}}(w_{\text{adv}})} . This update is typically performed using a standard optimizer like SGD or Adam. == Application and Performance == SAM has been applied in various machine learning contexts, primarily in computer vision. Research has shown it can improve generalization performance in models such as Convolutional Neural Networks (CNNs) and Vision Transformers (ViTs) on image datasets including ImageNet, CIFAR-10, and CIFAR-100. The algorithm has also been found to be effective in training models with noisy labels, where it performs comparably to methods designed specifically for this problem. Some studies indicate that SAM and its variants can improve out-of-distribution (OOD) generalization, which is a model's ability to perform well on data from distributions not seen during training. Other areas where it has been applied include gradual domain adaptation and mitigating overfitting in scenarios with repeated exposure to training examples. == Limitations == A primary limitation of SAM is its computational cost. By requiring two gradient computations (one for the ascent and one for the descent) per optimization step, it approximately doubles the training time compared to standard optimizers. The theoretical convergence properties of SAM are still under investigation. Some research suggests that with a constant step size, SAM may not converge to a stationary point. The accuracy of the single gradient step approximation for finding the worst-case perturbation may also decrease during the training process. The effectiveness of SAM can also be domain-dependent. While it has shown benefits for computer vision tasks, its impact on other areas, such as GPT-style language models where each training example is seen only once, has been reported as limited in some studies. Furthermore, while SAM seeks flat minima, some research suggests that not all flat minima necessarily lead to good generalization. The algorithm also introduces the neighborhood size ρ {\displaystyle \rho } as a new hyperparameter, which requires tuning. == Research, Variants, and Enhancements == Active research on SAM focuses on reducing its computational overhead and improving its performance. Several variants have been proposed to make the algorithm more efficient. These include methods that attempt to parallelize the two gradient computations, apply the perturbation to only a subset of parameters, or reduce the number of computation steps required. Other approaches use historical gradient information or apply SAM steps intermittently to lower the computational burden. To improve performance and robustness, variants have been developed that adapt the neighborhood size based on model parameter scales (Adaptive SAM or ASAM) or incorporate information about the curvature of the loss landscape (Curvature Regularized SAM or CR-SAM). Other research explores refining the perturbation step by focusing on specific components of the gradient or combining SAM with techniques like random smoothing. Theoretical work continues to analyze the algorithm's behavior, including its implicit bias towards flatter minima and the development of broader frameworks for sharpness-aware optimization that use different measures of sharpness.

    Read more →
  • Vapnik–Chervonenkis theory

    Vapnik–Chervonenkis theory

    Vapnik–Chervonenkis theory (also known as VC theory) was developed during 1960–1990 by Vladimir Vapnik and Alexey Chervonenkis. The theory is a form of computational learning theory, which attempts to explain the learning process from a statistical point of view. == Introduction == VC theory covers at least four parts (as explained in The Nature of Statistical Learning Theory): Theory of consistency of learning processes What are (necessary and sufficient) conditions for consistency of a learning process based on the empirical risk minimization principle? Nonasymptotic theory of the rate of convergence of learning processes How fast is the rate of convergence of the learning process? Theory of controlling the generalization ability of learning processes How can one control the rate of convergence (the generalization ability) of the learning process? Theory of constructing learning machines How can one construct algorithms that can control the generalization ability? VC Theory is a major subbranch of statistical learning theory. One of its main applications in statistical learning theory is to provide generalization conditions for learning algorithms. From this point of view, VC theory is related to stability, which is an alternative approach for characterizing generalization. In addition, VC theory and VC dimension are instrumental in the theory of empirical processes, in the case of processes indexed by VC classes. Arguably these are the most important applications of the VC theory, and are employed in proving generalization. Several techniques will be introduced that are widely used in the empirical process and VC theory. The discussion is mainly based on the book Weak Convergence and Empirical Processes: With Applications to Statistics. == Overview of VC theory in empirical processes == === Background on empirical processes === Let ( X , A ) {\displaystyle ({\mathcal {X}},{\mathcal {A}})} be a measurable space. For any measure Q {\displaystyle Q} on ( X , A ) {\displaystyle ({\mathcal {X}},{\mathcal {A}})} , and any measurable functions f : X → R {\displaystyle f:{\mathcal {X}}\to \mathbf {R} } , define Q f = ∫ f d Q {\displaystyle Qf=\int fdQ} Measurability issues will be ignored here, for more technical detail see. Let F {\displaystyle {\mathcal {F}}} be a class of measurable functions f : X → R {\displaystyle f:{\mathcal {X}}\to \mathbf {R} } and define: ‖ Q ‖ F = sup { | Q f | : f ∈ F } . {\displaystyle \|Q\|_{\mathcal {F}}=\sup\{\vert Qf\vert \ :\ f\in {\mathcal {F}}\}.} Let X 1 , … , X n {\displaystyle X_{1},\ldots ,X_{n}} be independent, identically distributed random elements of ( X , A ) {\displaystyle ({\mathcal {X}},{\mathcal {A}})} . Then define the empirical measure P n = n − 1 ∑ i = 1 n δ X i , {\displaystyle \mathbb {P} _{n}=n^{-1}\sum _{i=1}^{n}\delta _{X_{i}},} where δ here stands for the Dirac measure. The empirical measure induces a map F → R {\displaystyle {\mathcal {F}}\to \mathbf {R} } given by: f ↦ P n f = 1 n ( f ( X 1 ) + . . . + f ( X n ) ) {\displaystyle f\mapsto \mathbb {P} _{n}f={\frac {1}{n}}(f(X_{1})+...+f(X_{n}))} Now suppose P is the underlying true distribution of the data, which is unknown. Empirical Processes theory aims at identifying classes F {\displaystyle {\mathcal {F}}} for which statements such as the following hold: uniform law of large numbers: ‖ P n − P ‖ F → n 0 , {\displaystyle \|\mathbb {P} _{n}-P\|_{\mathcal {F}}{\underset {n}{\to }}0,} That is, as n → ∞ {\displaystyle n\to \infty } , | 1 n ( f ( X 1 ) + . . . + f ( X n ) ) − ∫ f d P | → 0 {\displaystyle \left|{\frac {1}{n}}(f(X_{1})+...+f(X_{n}))-\int fdP\right|\to 0} uniformly for all f ∈ F {\displaystyle f\in {\mathcal {F}}} . uniform central limit theorem: G n = n ( P n − P ) ⇝ G , in ℓ ∞ ( F ) {\displaystyle \mathbb {G} _{n}={\sqrt {n}}(\mathbb {P} _{n}-P)\rightsquigarrow \mathbb {G} ,\quad {\text{in }}\ell ^{\infty }({\mathcal {F}})} In the former case F {\displaystyle {\mathcal {F}}} is called Glivenko–Cantelli class, and in the latter case (under the assumption ∀ x , sup f ∈ F | f ( x ) − P f | < ∞ {\displaystyle \forall x,\sup \nolimits _{f\in {\mathcal {F}}}\vert f(x)-Pf\vert <\infty } ) the class F {\displaystyle {\mathcal {F}}} is called Donsker or P-Donsker. A Donsker class is Glivenko–Cantelli in probability by an application of Slutsky's theorem. These statements are true for a single f {\displaystyle f} , by standard LLN, CLT arguments under regularity conditions, and the difficulty in the Empirical Processes comes in because joint statements are being made for all f ∈ F {\displaystyle f\in {\mathcal {F}}} . Intuitively then, the set F {\displaystyle {\mathcal {F}}} cannot be too large, and as it turns out that the geometry of F {\displaystyle {\mathcal {F}}} plays a very important role. One way of measuring how big the function set F {\displaystyle {\mathcal {F}}} is to use the so-called covering numbers. The covering number N ( ε , F , ‖ ⋅ ‖ ) {\displaystyle N(\varepsilon ,{\mathcal {F}},\|\cdot \|)} is the minimal number of balls { g : ‖ g − f ‖ < ε } {\displaystyle \{g:\|g-f\|<\varepsilon \}} needed to cover the set F {\displaystyle {\mathcal {F}}} (here it is obviously assumed that there is an underlying norm on F {\displaystyle {\mathcal {F}}} ). The entropy is the logarithm of the covering number. Two sufficient conditions are provided below, under which it can be proved that the set F {\displaystyle {\mathcal {F}}} is Glivenko–Cantelli or Donsker. A class F {\displaystyle {\mathcal {F}}} is P-Glivenko–Cantelli if it is P-measurable with envelope F such that P ∗ F < ∞ {\displaystyle P^{\ast }F<\infty } and satisfies: ∀ ε > 0 sup Q N ( ε ‖ F ‖ Q , F , L 1 ( Q ) ) < ∞ . {\displaystyle \forall \varepsilon >0\quad \sup \nolimits _{Q}N(\varepsilon \|F\|_{Q},{\mathcal {F}},L_{1}(Q))<\infty .} The next condition is a version of Dudley's theorem. If F {\displaystyle {\mathcal {F}}} is a class of functions such that ∫ 0 ∞ sup Q log ⁡ N ( ε ‖ F ‖ Q , 2 , F , L 2 ( Q ) ) d ε < ∞ {\displaystyle \int _{0}^{\infty }\sup \nolimits _{Q}{\sqrt {\log N\left(\varepsilon \|F\|_{Q,2},{\mathcal {F}},L_{2}(Q)\right)}}d\varepsilon <\infty } then F {\displaystyle {\mathcal {F}}} is P-Donsker for every probability measure P such that P ∗ F 2 < ∞ {\displaystyle P^{\ast }F^{2}<\infty } . In the last integral, the notation means ‖ f ‖ Q , 2 = ( ∫ | f | 2 d Q ) 1 2 {\displaystyle \|f\|_{Q,2}=\left(\int |f|^{2}dQ\right)^{\frac {1}{2}}} . === Symmetrization === The majority of the arguments about how to bound the empirical process rely on symmetrization, maximal and concentration inequalities, and chaining. Symmetrization is usually the first step of the proofs, and since it is used in many machine learning proofs on bounding empirical loss functions (including the proof of the VC inequality which is discussed in the next section). It is presented here: Consider the empirical process: f ↦ ( P n − P ) f = 1 n ∑ i = 1 n ( f ( X i ) − P f ) {\displaystyle f\mapsto (\mathbb {P} _{n}-P)f={\dfrac {1}{n}}\sum _{i=1}^{n}(f(X_{i})-Pf)} Turns out that there is a connection between the empirical and the following symmetrized process: f ↦ P n 0 f = 1 n ∑ i = 1 n ε i f ( X i ) {\displaystyle f\mapsto \mathbb {P} _{n}^{0}f={\dfrac {1}{n}}\sum _{i=1}^{n}\varepsilon _{i}f(X_{i})} The symmetrized process is a Rademacher process, conditionally on the data X i {\displaystyle X_{i}} . Therefore, it is a sub-Gaussian process by Hoeffding's inequality. Lemma (Symmetrization). For every nondecreasing, convex Φ: R → R and class of measurable functions F {\displaystyle {\mathcal {F}}} , E Φ ( ‖ P n − P ‖ F ) ≤ E Φ ( 2 ‖ P n 0 ‖ F ) {\displaystyle \mathbb {E} \Phi (\|\mathbb {P} _{n}-P\|_{\mathcal {F}})\leq \mathbb {E} \Phi \left(2\left\|\mathbb {P} _{n}^{0}\right\|_{\mathcal {F}}\right)} The proof of the Symmetrization lemma relies on introducing independent copies of the original variables X i {\displaystyle X_{i}} (sometimes referred to as a ghost sample) and replacing the inner expectation of the LHS by these copies. After an application of Jensen's inequality different signs could be introduced (hence the name symmetrization) without changing the expectation. The proof can be found below because of its instructive nature. The same proof method can be used to prove the Glivenko–Cantelli theorem. A typical way of proving empirical CLTs, first uses symmetrization to pass the empirical process to P n 0 {\displaystyle \mathbb {P} _{n}^{0}} and then argue conditionally on the data, using the fact that Rademacher processes are simple processes with nice properties. === VC Connection === It turns out that there is a fascinating connection between certain combinatorial properties of the set F {\displaystyle {\mathcal {F}}} and the entropy numbers. Uniform covering numbers can be controlled by the notion of Vapnik–Chervonenkis classes of sets – or shortly VC sets. Consider a collection C {\displaystyle {\mathcal {C}}} of subsets of the sample space X {\displaystyle

    Read more →
  • Rectified linear unit

    Rectified linear unit

    In the context of artificial neural networks, the rectifier or ReLU (rectified linear unit) activation function is an activation function defined as the non-negative part of its argument, i.e., the ramp function: ReLU ⁡ ( x ) = x + = max ( 0 , x ) = x + | x | 2 = { x if x > 0 , 0 x ≤ 0 {\displaystyle \operatorname {ReLU} (x)=x^{+}=\max(0,x)={\frac {x+|x|}{2}}={\begin{cases}x&{\text{if }}x>0,\\0&x\leq 0\end{cases}}} where x {\displaystyle x} is the input to a neuron. This is analogous to half-wave rectification in electrical engineering. ReLU is one of the most popular activation functions for artificial neural networks, and finds application in computer vision and speech recognition using deep neural nets and computational neuroscience. == History == The ReLU was first used by Alston Householder in 1941 as a mathematical abstraction of biological neural networks. Kunihiko Fukushima in 1969 used ReLU in the context of visual feature extraction in hierarchical neural networks. In 1998, Gregory Woodbury demonstrated that the rectified linear function could account for a broad range of emergent properties in the visual cortex. His work showed that a single unified model could drive the joint development of refined retinotopic maps, ocular dominance columns, and orientation selectivity. By utilizing the rectifier's "cutoff" property, Woodbury achieved a close quantitative fit to biological data, matching the spatial periodicities and topographic refinement patterns observed in macaque and cat cortical maps. Furthermore, he extended this framework to adult plasticity, accurately replicating the spatial and temporal dynamics of lesion-induced cortical reorganization. This research established that the rectified linear response was a necessary mechanism for the stable self-organisation and maintenance of complex, multi-feature neural maps. In 2000, Hahnloser et al. argued that ReLU approximates the biological relationship between neural firing rates and input current, in addition to enabling recurrent neural network dynamics to stabilise under weaker criteria. Prior to 2010, most activation functions used were the logistic sigmoid (which is inspired by probability theory; see logistic regression) and its more numerically efficient counterpart, the hyperbolic tangent. Around 2010, the use of ReLU became common again. Jarrett et al. (2009) noted that rectification by either absolute or ReLU (which they called "positive part") was critical for object recognition in convolutional neural networks (CNNs), specifically because it allows average pooling without neighboring filter outputs cancelling each other out. They hypothesized that the use of sigmoid or tanh was responsible for poor performance in previous CNNs. Nair and Hinton (2010) made a theoretical argument that the softplus activation function should be used, in that the softplus function numerically approximates the sum of an exponential number of linear models that share parameters. They then proposed ReLU as a good approximation to it. Specifically, they began by considering a single binary neuron in a Boltzmann machine that takes x {\displaystyle x} as input, and produces 1 as output with probability σ ( x ) = 1 1 + e − x {\displaystyle \sigma (x)={\frac {1}{1+e^{-x}}}} . They then considered extending its range of output by making infinitely many copies of it X 1 , X 2 , X 3 , … {\displaystyle X_{1},X_{2},X_{3},\dots } , that all take the same input, offset by an amount 0.5 , 1.5 , 2.5 , … {\displaystyle 0.5,1.5,2.5,\dots } , then their outputs are added together as ∑ i = 1 ∞ X i {\displaystyle \sum _{i=1}^{\infty }X_{i}} . They then demonstrated that ∑ i = 1 ∞ X i {\displaystyle \sum _{i=1}^{\infty }X_{i}} is approximately equal to N ( log ⁡ ( 1 + e x ) , σ ( x ) ) {\displaystyle {\mathcal {N}}(\log(1+e^{x}),\sigma (x))} , which is also approximately equal to ReLU ⁡ ( N ( x , σ ( x ) ) ) {\displaystyle \operatorname {ReLU} ({\mathcal {N}}(x,\sigma (x)))} , where N {\displaystyle {\mathcal {N}}} stands for the gaussian distribution. They also argued for another reason for using ReLU: that it allows "intensity equivariance" in image recognition. That is, multiplying input image by a constant k {\displaystyle k} multiplies the output also. In contrast, this is false for other activation functions like sigmoid or tanh. They found that ReLU activation allowed good empirical performance in restricted Boltzmann machines. Glorot et al (2011) argued that ReLU has the following advantages over sigmoid or tanh: ReLU is more similar to biological neurons' responses in their main operating regime. ReLU avoids vanishing gradients. ReLU is cheaper to compute. ReLU creates sparse representation naturally, because many hidden units output exactly zero for a given input. They also found empirically that deep networks trained with ReLU can achieve strong performance without unsupervised pre-training, especially on large, purely supervised tasks. In 2017, the rectified linear function became a central component of the transformer architecture introduced in the Vaswani et al paper "Attention Is All You Need". Within every transformer layer, ReLU is utilized in the position-wise feed-forward networks (FFN), defined by Equation 2 of their paper: FFN ⁡ ( x ) = max ( 0 , x W 1 + b 1 ) W 2 + b 2 {\displaystyle \operatorname {FFN} (x)=\max(0,xW_{1}+b_{1})W_{2}+b_{2}} This equation is foundational to the model's capacity; while the attention mechanism determines the relationships between tokens, the ReLU-based FFN performs the majority of the numerical computation and houses the bulk of the model's parameters. The efficiency and scalability of this rectified framework triggered a global technological revolution, enabling the development of Large Language Models that have had a profound economic impact. The industrial response to this architecture—including the massive expansion of AI-specific hardware and the birth of the generative AI sector—has positioned the Transformer as a cornerstone of 21st-century infrastructure. During the post 2017 period of rapid AI advancement, the rectified linear unit function has been key to achieving increased model performance and scaling due to the fact that it zeros out responses that are immaterial for a given stimuli, preventing them from accumulating in massive scale models. It is the complete silencing of the parts of the model found to be stimuli-irrelevant during learning that allows for scaling. As the stimuli-irrelevant proportion of the model becomes more massive, these highly numerous connections within the model would inevitably accumulate during scaling no matter how small each individual response is. Therefore, the rectified linear unit function, with its absolute zeroing property, enabled the scaling to hundred billion parameter models and beyond. Early Transformer scaling giants like GPT-3 (2020) and Falcon-180B (2023) relied on the rectified linear unit function explicitly, while successors such as GPT-4 (2023) and Llama 3 (2024) utilized smoother variants like GELU or SwiGLU. These variants were used to improve training stability while fundamentally preserving the rectified principle of zeroing low responses. At the centre of modern artificial intelligence ReLU and its variants maintain absolute zero response across the bulk of the model at any one time, while maintaining approximately linear reponses for stimuli-relevant connections enabling high performance on each specific cognitive task. This feature of activation sparsity has been critical for massive scaling and performance gains of AI models right up to the present day. == Advantages == Advantages of ReLU include: Sparse activation: for example, in a randomly initialized network, only about 50% of hidden units are activated (i.e. have a non-zero output). Better gradient propagation: fewer vanishing gradient problems compared to sigmoidal activation functions that saturate in both directions. Efficiency: only requires comparison and addition. Scale-invariant (homogeneous, or "intensity equivariance"): max ( 0 , a x ) = a max ( 0 , x ) for a ≥ 0 {\displaystyle \max(0,ax)=a\max(0,x){\text{ for }}a\geq 0} . == Potential problems == Possible downsides can include: Non-differentiability at zero (however, it is differentiable anywhere else, and the value of the derivative at zero can be chosen to be 0 or 1 arbitrarily). Not zero-centered: ReLU outputs are always non-negative. This can make it harder for the network to learn during backpropagation, because gradient updates tend to push weights in one direction (positive or negative). Batch normalization can help address this. ReLU is unbounded. Redundancy of the parametrization: Because ReLU is scale-invariant, the network computes the exact same function by scaling the weights and biases in front of a ReLU activation by k {\displaystyle k} , and the weights after by 1 / k {\displaystyle 1/k} . Dying ReLU: ReLU neurons can sometimes be pushed into states

    Read more →
  • Seam carving

    Seam carving

    Seam carving (or liquid rescaling) is an algorithm for content-aware image resizing, developed by Shai Avidan, of Mitsubishi Electric Research Laboratories (MERL), and Ariel Shamir, of the Interdisciplinary Center and MERL. It functions by establishing a number of seams (paths of least importance) in an image and automatically removes seams to reduce image size or inserts seams to extend it. Seam carving also allows manually defining areas in which pixels may not be modified, and features the ability to remove whole objects from photographs. The purpose of the algorithm is image retargeting, which is the problem of displaying images without distortion on media of various sizes (cell phones, projection screens) using document standards, like HTML, that already support dynamic changes in page layout and text but not images. Image Retargeting was invented by Vidya Setlur, Saeko Takage, Ramesh Raskar, Michael Gleicher and Bruce Gooch in 2005. The work by Setlur et al. won the 10-year impact award in 2015. == Seams == Seams can be either vertical or horizontal. A vertical seam is a path of pixels connected from top to bottom in an image with one pixel in each row. A horizontal seam is similar with the exception of the connection being from left to right. The importance/energy function values a pixel by measuring its contrast with its neighbor pixels. == Process == The below example describes the process of seam carving: The seams to remove depends only on the dimension (height or width) one wants to shrink. It is also possible to invert step 4 so the algorithm enlarges in one dimension by copying a low energy seam and averaging its pixels with its neighbors. === Computing seams === Computing a seam consists of finding a path of minimum energy cost from one end of the image to another. This can be done via Dijkstra's algorithm, dynamic programming, greedy algorithm or graph cuts among others. ==== Dynamic programming ==== Dynamic programming is a programming method that stores the results of sub-calculations in order to simplify calculating a more complex result. Dynamic programming can be used to compute seams. If attempting to compute a vertical seam (path) of lowest energy, for each pixel in a row we compute the energy of the current pixel plus the energy of one of the three possible pixels above it. The images below depict a DP process to compute one optimal seam. Each square represents a pixel, with the top-left value in red representing the energy value of that pixel. The value in black represents the cumulative sum of energies leading up to and including that pixel. The energy calculation is trivially parallelized for simple functions. The calculation of the DP array can also be parallelized with some interprocess communication. However, the problem of making multiple seams at the same time is harder for two reasons: the energy needs to be regenerated for each removal for correctness and simply tracing back multiple seams can form overlaps. Avidan 2007 computes all seams by removing each seam iteratively and storing an "index map" to record all the seams generated. The map holds a "nth seam" number for each pixel on the image, and can be used later for size adjustment. If one ignores both issues however, a greedy approximation for parallel seam carving is possible. To do so, one starts with the minimum-energy pixel at one end, and keep choosing the minimum energy path to the other end. The used pixels are marked so that they are not picked again. Local seams can also be computed for smaller parts of the image in parallel for a good approximation. == Issues == The algorithm may need user-provided information to reduce errors. This can consist of painting the regions which are to be preserved. With human faces it is possible to use face detection. Sometimes the algorithm, by removing a low energy seam, may end up inadvertently creating a seam of higher energy. The solution to this is to simulate a removal of a seam, and then check the energy delta to see if the energy increases (forward energy). If it does, prefer other seams instead. == Implementations == Adobe Systems acquired a non-exclusive license to seam carving technology from MERL, and implemented it as a feature in Photoshop CS4, where it is called Content Aware Scaling. As the license is non-exclusive, other popular computer graphics applications (e. g. GIMP, digiKam, and ImageMagick) as well as some stand-alone programs (e. g. iResizer) also have implementations of this technique, some of which are released as free and open source software. There also exists an implementation for webpages. == Improvements and extensions == Better energy function and application to video by introducing 2D (time+1D) seams. Faster implementation on GPU. Application of this forward energy function to static images. Multi-operator: Combine with cropping and scaling. Much faster removal of multiple seams. Removing seams through neural deformation fields to extend to continuous domains like 3D scenes. A 2010 review of eight image retargeting methods found that seam carving produced output that was ranked among the worst of the tested algorithms. It was, however, a part of one of the highest-ranking algorithms: the multi-operator extension mentioned above (combined with cropping and scaling).

    Read more →
  • Common Voice

    Common Voice

    Common Voice is a crowdsourcing project started by Mozilla to create a free and open speech corpus. The project is supported by volunteers who record sample sentences with a microphone and review recordings of other users. The transcribed sentences are collected in a voice database available under the public domain license CC0. This license ensures that developers can use the database for voice-to-text and text-to-voice applications without restrictions or costs. == Aims == Common Voice aims to provide diverse voice samples. According to Mozilla's Katharina Borchert, many existing projects took datasets from public radio or otherwise had datasets that underrepresented both women and people with pronounced accents. == Voice database == The first dataset was released in November 2017. More than 20,000 users worldwide had recorded 500 hours of English sentences. In February 2019, the first batch of languages was released for use. This included 18 languages such as English, French, German and Mandarin Chinese, but also less prevalent languages like Welsh and Kabyle. In total, this included almost 1,400 hours of recorded voice data from more than 42,000 contributors. By July 2020 the database had amassed 7,226 hours of voice recordings in 54 languages, 5,591 hours of which had been verified by volunteers. In May 2021, following the work to add Kinyarwanda, the project received a grant to add Kiswahili. At the beginning of 2022, Bengali.AI partnered with Common Voice to launch the "Bangla Speech Recognition" project that aims to make machines understand the Bangla language. 2000 hours of voice was collected. In September 2022, it was announced that the Twi language of Ghana was the 100th language to be added to the database. As of December 2025, Mozilla Common Voice collects voice data for over 250 languages, with the most hours having been collected in English, Catalan, Kinyarwanda, Belarusian and Esperanto.

    Read more →
  • Hinge loss

    Hinge loss

    In machine learning, the hinge loss is a loss function used for training classifiers. The hinge loss is used for "maximum-margin" classification, most notably for support vector machines (SVMs). For an intended output t = ±1 and a classifier score y, the hinge loss of the prediction y is defined as ℓ ( y ) = max ( 0 , 1 − t ⋅ y ) {\displaystyle \ell (y)=\max(0,1-t\cdot y)} Note that y {\displaystyle y} should be the "raw" output of the classifier's decision function, not the predicted class label. For instance, in linear SVMs, y = w ⋅ x + b {\displaystyle y=\mathbf {w} \cdot \mathbf {x} +b} , where ( w , b ) {\displaystyle (\mathbf {w} ,b)} are the parameters of the hyperplane and x {\displaystyle \mathbf {x} } is the input variable(s). When t and y have the same sign (meaning y predicts the right class) and | y | ≥ 1 {\displaystyle |y|\geq 1} , the hinge loss ℓ ( y ) = 0 {\displaystyle \ell (y)=0} . When they have opposite signs, ℓ ( y ) {\displaystyle \ell (y)} increases linearly with y, and similarly if | y | < 1 {\displaystyle |y|<1} , even if it has the same sign (correct prediction, but not by enough margin). The Hinge loss is not a proper scoring rule. == Extensions == While binary SVMs are commonly extended to multiclass classification in a one-vs.-all or one-vs.-one fashion, it is also possible to extend the hinge loss itself for such an end. Several different variations of multiclass hinge loss have been proposed. For example, Crammer and Singer defined it for a linear classifier as ℓ ( y ) = max ( 0 , 1 + max y ≠ t w y x − w t x ) {\displaystyle \ell (y)=\max(0,1+\max _{y\neq t}\mathbf {w} _{y}\mathbf {x} -\mathbf {w} _{t}\mathbf {x} )} , where t {\displaystyle t} is the target label, w t {\displaystyle \mathbf {w} _{t}} and w y {\displaystyle \mathbf {w} _{y}} are the model parameters. Weston and Watkins provided a similar definition, but with a sum rather than a max: ℓ ( y ) = ∑ y ≠ t max ( 0 , 1 + w y x − w t x ) {\displaystyle \ell (y)=\sum _{y\neq t}\max(0,1+\mathbf {w} _{y}\mathbf {x} -\mathbf {w} _{t}\mathbf {x} )} . In structured prediction, the hinge loss can be further extended to structured output spaces. Structured SVMs with margin rescaling use the following variant, where w denotes the SVM's parameters, y the SVM's predictions, φ the joint feature function, and Δ the Hamming loss: ℓ ( y ) = max ( 0 , Δ ( y , t ) + ⟨ w , ϕ ( x , y ) ⟩ − ⟨ w , ϕ ( x , t ) ⟩ ) = max ( 0 , max y ∈ Y ( Δ ( y , t ) + ⟨ w , ϕ ( x , y ) ⟩ ) − ⟨ w , ϕ ( x , t ) ⟩ ) {\displaystyle {\begin{aligned}\ell (\mathbf {y} )&=\max(0,\Delta (\mathbf {y} ,\mathbf {t} )+\langle \mathbf {w} ,\phi (\mathbf {x} ,\mathbf {y} )\rangle -\langle \mathbf {w} ,\phi (\mathbf {x} ,\mathbf {t} )\rangle )\\&=\max(0,\max _{y\in {\mathcal {Y}}}\left(\Delta (\mathbf {y} ,\mathbf {t} )+\langle \mathbf {w} ,\phi (\mathbf {x} ,\mathbf {y} )\rangle \right)-\langle \mathbf {w} ,\phi (\mathbf {x} ,\mathbf {t} )\rangle )\end{aligned}}} . == Optimization == The hinge loss is a convex function, so many of the usual convex optimizers used in machine learning can work with it. It is not differentiable, but has a subgradient with respect to model parameters w of a linear SVM with score function y = w ⋅ x {\displaystyle y=\mathbf {w} \cdot \mathbf {x} } that is given by ∂ ℓ ∂ w i = { − t ⋅ x i if t ⋅ y < 1 , 0 otherwise . {\displaystyle {\frac {\partial \ell }{\partial w_{i}}}={\begin{cases}-t\cdot x_{i}&{\text{if }}t\cdot y<1,\\0&{\text{otherwise}}.\end{cases}}} However, since the derivative of the hinge loss at t y = 1 {\displaystyle ty=1} is undefined, smoothed versions may be preferred for optimization, such as Rennie and Srebro's ℓ ( y ) = { 1 2 − t y if t y ≤ 0 , 1 2 ( 1 − t y ) 2 if 0 < t y < 1 , 0 if 1 ≤ t y {\displaystyle \ell (y)={\begin{cases}{\frac {1}{2}}-ty&{\text{if}}~~ty\leq 0,\\{\frac {1}{2}}(1-ty)^{2}&{\text{if}}~~0 Read more →

  • VIGRA

    VIGRA

    VIGRA is the abbreviation for "Vision with Generic Algorithms". It is a free open-source computer vision library which focuses on customizable algorithms and data structures. VIGRA component can be easily adapted to specific needs of target application without compromising execution speed, by using template techniques similar to those in the C++ Standard Template Library. == Features == VIGRA is cross-platform, with working builds on Microsoft Windows, Mac OS X, Linux, and OpenBSD. Since version 1.7.1, VIGRA provides Python bindings based on numpy framework. == History == VIGRA was originally designed and implemented by scientists at University of Hamburg faculty of computer science; its core maintainers are now working at Heidelberg Collaboratory for Image Processing (HCI) University of Heidelberg. In the meantime, many developers have contributed to the project. == Application == CellCognition and ilastik uses VIGRA computer vision library. OpenOffice.org uses VIGRA as part of its headless software rendering backend; LibreOffice does so until version 5.2.

    Read more →
  • Spotify Kids

    Spotify Kids

    Spotify Kids is a Swedish kid-friendly Music streaming service developed by Spotify. It offers curated content for children, including music, audiobooks, lullabies, and bedtime stories, while providing their parents with parental controls. The service is only available to subscribers to Spotify's Premium Family subscription plan. == Function == Spotify Kids is a Swedish Kid-friendly Music Streaming Service that allows children to browse Spotify with parental controls. Using the app, parents can view their children's listening history, block specific songs, and share playlists with their children. The app also includes sing-along songs, playlists designed for young children, and curated audiobooks, lullabies, and bedtime stories. Access is included in Spotify's Premium Family subscription plan, and is exclusive to subscribers to the plan. Users can configure the app for a specific age group upon first launch. The playlists on Spotify Kids are curated by groups including Discovery Kids, Nickelodeon, Universal Pictures, and The Walt Disney Company. All content on the Spotify Kids app is curated by editors. As of March 2021, there were roughly 8,000 songs available on the platform. The design of the Spotify Kids app is colorful, and user interface varies depending on the age group for which the app is configured. Spotify Kids is designed to comply with consent and data collection regulations for apps used by children. TechCrunch explains that it is "designed on a grand scale to drive subscriptions to Spotify's top-tier $14.99-per-month Premium Family Plan." == Release == After being beta tested in Ireland in October 2019, it was released as a beta across the United Kingdom on February 11, 2020. It was later released in Sweden, Denmark, Australia, New Zealand, Mexico, Argentina, and Brazil. On March 31, 2021, it was made available in France, Canada, and the United States.

    Read more →
  • Clustering illusion

    Clustering illusion

    The clustering illusion is the tendency to erroneously consider the inevitable "streaks" or "clusters" arising in small samples from random distributions to be non-random. The illusion is caused by a human tendency to underpredict the amount of variability likely to appear in a small sample of random or pseudorandom data. Thomas Gilovich, an early author on the subject, argued that the effect occurs for different types of random dispersions. Some might perceive patterns in stock market price fluctuations over time, or clusters in two-dimensional data such as the locations of impact of World War II V-1 flying bombs on maps of London. Although Londoners developed specific theories about the pattern of impacts within London, a statistical analysis by R. D. Clarke originally published in 1946 showed that the impacts of V-2 rockets on London were a close fit to a random distribution. == Similar biases == Using this cognitive bias in causal reasoning may result in the Texas sharpshooter fallacy, in which differences in data are ignored and similarities are overemphasized. More general forms of erroneous pattern recognition are pareidolia and apophenia. Related biases are the illusion of control which the clustering illusion could contribute to, and insensitivity to sample size in which people don't expect greater variation in smaller samples. A different cognitive bias involving misunderstanding of chance streams is the gambler's fallacy. == Possible causes == Daniel Kahneman and Amos Tversky explained this kind of misprediction as being caused by the representativeness heuristic (which itself they also first proposed).

    Read more →
  • Apache Giraph

    Apache Giraph

    Apache Giraph is an Apache project to perform graph processing on big data. Giraph utilizes Apache Hadoop's MapReduce implementation to process graphs. Facebook used Giraph with some performance improvements to analyze one trillion edges using 200 machines in 4 minutes. Giraph is based on a paper published by Google about its own graph processing system called Pregel. It can be compared to other Big Graph processing libraries such as Cassovary. As of September 2023, it is no longer actively developed.

    Read more →