AI Face Blur

AI Face Blur — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Software design

  Software design is the process of conceptualizing how a software system will work before it is implemented or modified. Software design also refers to the direct result of the design process – the concepts of how the software will work which may be formally documented or may be maintained less formally, including via oral tradition. The design process enables a designer to model aspects of a software system before it exists with the intent of making the effort of writing the code more efficiently. Creativity, past experience, a sense of what makes "good" software, and a commitment to quality are success factors for a competent design. A software design can be compared to an architected plan for a house. High-level plans represent the totality of the house (e.g., a three-dimensional rendering of the house). Lower-level plans provide guidance for constructing each detail (e.g., the plumbing lay). Similarly, the software design model provides a variety of views of the proposed software solution. == Part of the overall process == In terms of the waterfall development process, software design is the activity that occurs after requirements analysis and before coding. Requirements analysis determines what the system needs to do without determining how it will do it, and thus, multiple designs can be imagined that satisfy the requirements. The design can be created while coding, without a plan or requirements analysis, but for more complex projects this is less feasible. Completing a design prior to coding allows for multidisciplinary designers and subject-matter experts to collaborate with programmers to produce software that is useful and technically sound. Sometimes, a simulation or prototype is created to model the system in an effort to determine a valid and good design. == Code as design == A common point of confusion with the term design in software is that the process applies at multiple levels of abstraction such as a high-level software architecture and lower-level components, functions and algorithms. A relatively formal process may occur at high levels of abstraction but at lower levels, the design process is almost always less formal where the only artifact of design may be the code itself. To the extent that this is true, software design refers to the design of the design. Edsger W. Dijkstra referred to this layering of semantic levels as the "radical novelty" of computer programming, and Donald Knuth used his experience writing TeX to describe the futility of attempting to design a program prior to implementing it: TEX would have been a complete failure if I had merely specified it and not participated fully in its initial implementation. The process of implementation constantly led me to unanticipated questions and to new insights about how the original specifications could be improved. == Artifacts == A design process may include the production of art Software design documentation such as flow chart, use case, Pseudocode, Unified Modeling Language model and other Fundamental modeling concepts. For user centered software, design may involve user experience design yielding a storyboard to help determine those specifications. Documentation may be reviewed to allow constraints, specifications and even requirements to be adjusted prior to coding. == Iterative design == Software systems inherently deal with uncertainties, and the size of software components can significantly influence a system's outcomes, both positively and negatively. Neal Ford and Mark Richards propose an iterative approach to address the challenge of identifying and right-sizing components. This method emphasizes continuous refinement as teams develop a more nuanced understanding of system behavior and requirements. The approach typically involves a cycle with several stages: A high-level partitioning strategy is established, often categorized as technical or domain-based. Guidelines for the smallest meaningful deployable unit, referred to as "quanta," are defined. While these foundational decisions are made early, they may be revisited later in the cycle if necessary. Initial components are identified based on the established strategy. Requirements are assigned to the identified components. The roles and responsibilities of each component are analyzed to ensure clarity and minimize overlap. Architectural characteristics, such as scalability, fault tolerance, and maintainability, are evaluated. Components may be restructured based on feedback from development teams. This cycle serves as a general framework and can be adapted to different domains. == Design principles == Design principles enable a software engineer to navigate the design process. Davis suggested principles which have been refined over time as: The design process should not suffer from "tunnel vision" A good designer should consider alternative approaches, judging each based on the requirements of the problem, the resources available to do the job. The design should be traceable to the analysis model Because a single element of the design model can often be traced back to multiple requirements, it is necessary to have a means for tracking how requirements have been satisfied by the design model. The design should not reinvent the wheel Systems are constructed using a set of design patterns, many of which have likely been encountered before. These patterns should always be chosen as an alternative to reinvention. Time is short and resources are limited; design time should be invested in representing (truly new) ideas by integrating patterns that already exist (when applicable). The design should "minimize the intellectual distance" between the software and the problem as it exists in the real world That is, the structure of the software design should, whenever possible, mimic the structure of the problem domain. The design should exhibit uniformity and integration A design is uniform if it appears fully coherent. In order to achieve this outcome, rules of style and format should be defined for a design team before design work begins. A design is integrated if care is taken in defining interfaces between design components. The design should be structured to accommodate change The design concepts discussed in the next section enable a design to achieve this principle. The design should be structured to degrade gently, even when aberrant data, events, or operating conditions are encountered Well-designed software should never "bomb"; it should be designed to accommodate unusual circumstances, and if it must terminate processing, it should do so in a graceful manner. Design is not coding, coding is not design Even when detailed procedural designs are created for program components, the level of abstraction of the design model is higher than the source code. The only design decisions made at the coding level should address the small implementation details that enable the procedural design to be coded. The design should be assessed for quality as it is being created, not after the fact A variety of design concepts and design measures are available to assist the designer in assessing quality throughout the development process. The design should be reviewed to minimize conceptual (semantic) errors There is sometimes a tendency to focus on minutiae when the design is reviewed, missing the forest for the trees. A design team should ensure that major conceptual elements of the design (omissions, ambiguity, inconsistency) have been addressed before worrying about the syntax of the design model. == Design concepts == Design concepts provide a designer with a foundation from which more sophisticated methods can be applied. Design concepts include: Abstraction Reducing the information content of a concept or an observable phenomenon, typically to retain only information that is relevant for a particular purpose. It is an act of Representing essential features without including the background details or explanations. Architecture The overall structure of the software and the ways in which that structure provides conceptual integrity for a system. Good software architecture will yield a good return on investment with respect to the desired outcome of the project, e.g. in terms of performance, quality, schedule and cost. Control hierarchy A program structure that represents the organization of a program component and implies a hierarchy of control. Data structure Representing the logical relationship between elements of data. Design pattern A designer may identify a design aspect of the system that has solved in the past. The reuse of such patterns can increase software development velocity. Information hiding Modules should be specified and designed so that information contained within a module is inaccessible to other modules that have no need for such information. Modularity Dividing the solution into parts (modules). Refinement The process of elaboration. A hierarchy is developed by decomposing a macrosco

  Read more →
• 

  Pedagogical agent

  A pedagogical agent is a concept borrowed from computer science and artificial intelligence and applied to education, usually as part of an intelligent tutoring system (ITS). It is a simulated human-like interface between the learner and the content, in an educational environment. A pedagogical agent is designed to model the type of interactions between a student and another person. Mabanza and de Wet define it as "a character enacted by a computer that interacts with the user in a socially engaging manner". A pedagogical agent can be assigned different roles in the learning environment, such as tutor or co-learner, depending on the desired purpose of the agent. "A tutor agent plays the role of a teacher, while a co-learner agent plays the role of a learning companion". == History == The history of Pedagogical Agents is closely aligned with the history of computer animation. As computer animation progressed, it was adopted by educators to enhance computerized learning by including a lifelike interface between the program and the learner. The first versions of a pedagogical agent were more cartoon than person, like Microsoft's Clippy which helped users of Microsoft Office load and use the program's features in 1997. However, with developments in computer animation, pedagogical agents can now look lifelike. By 2006 there was a call to develop modular, reusable agents to decrease the time and expertise required to create a pedagogical agent. There was also a call in 2009 to enact agent standards. The standardization and re-usability of pedagogical agents is less of an issue since the decrease in cost and widespread availability of animation tools. Individualized pedagogical agents can be found across disciplines including medicine, math, law, language learning, automotive, and armed forces. They are used in applications directed to every age, from preschool to adult. == Learning theories related to pedagogical agent design == === Distributed cognition theory === Distributed cognition theory is the method in which cognition progresses in the context of collaboration with others. Pedagogical agents can be designed to assist the cognitive transfer to the learner, operating as artifacts or partners with collaborative role in learning. To support the performance of an action by the user, the pedagogical agent can act as a cognitive tool as long as the agent is equipped with the knowledge that the user lacks. The interactions between the user and the pedagogical agent can facilitate a social relationship. The pedagogical agent may fulfill the role of a working partner. === Socio-cultural learning theory === Socio-cultural learning theory is how the user develops when they are involved in learning activities in which there is interaction with other agents. A pedagogical agent can: intervene when the user requests, provide support for tasks that the user cannot address, and potentially extend the learners cognitive reach. Interaction with the pedagogical agent may elicit a variety of emotions from the learner. The learner may become excited, confused, frustrated, and/or discouraged. These emotions affect the learners' motivation. === Extraneous Cognitive Load === Extraneous cognitive load is the extra effort being exerted by an individual's working memory due to the way information is being presented. A pedagogical agent can increase the user's cognitive load by distracting them and becoming the focus of their attention, causing split attention between the instructional material and the agent. Agents can reduce the perceived cognitive load by providing narration and personalization that can also promote a user's interest and motivation. While research on the reduction of cognitive load from pedagogical agents is minimal, more studies have shown that agents do not increase it. == Effectiveness == It has been suggested by researchers that pedagogical agents may take on different roles in the learning environment. Examples of these roles are: supplanting, scaffolding, coaching, testing, or demonstrating or modelling a procedure. A pedagogical agent as a tutor has not been demonstrated to add any benefit to an educational strategy in equivalent lessons with and without a pedagogical agent. According to Richard Mayer, there is some support in research for pedagogical agent increasing learning, but only as a presenter of social cues. A co-learner pedagogical agent is believed to increase the student's self-efficacy. By pointing out important features of instructional content, a pedagogical agent can fulfill the signaling function, which research on multimedia learning has shown to enhance learning. Research has demonstrated that human-human interaction may not be completely replaced by pedagogical agents, but learners may prefer the agents to non-agent multimedia systems. This finding is supported by social agency theory. Much like the varying effectiveness of the pedagogical agent roles in the learning environment, agents that take into account the user's affect have had mixed results. Research has shown pedagogical agents that make use of the users’ affect have been found to increase user knowledge retention, motivation, and perceived self-efficacy. However, with such a broad range of modalities in affective expressions, it is often difficult to utilize them. Additionally, having agents detect a user's affective state with precision remains challenging, as displays of affect are different across individuals. == Design == === Attractiveness === The appearance of a pedagogical agent can be manipulated to meet the learning requirements. The attractiveness of a pedagogical agent can enhance student's learning when the users were the opposite gender of the pedagogical agent. Male students prefer a sexy appearance of a female pedagogical agents and dislike the sexy appearance of male agents. Female students were not attracted by the sexy appearance of either male or female pedagogical agents. === Affective Response === Pedagogical agents have reached a point where they can convey and elicit emotion, but also reason about and respond to it. These agents are often designed to elicit and respond to affective actions from users through various modalities such as speech, facial expressions, and body gestures. They respond to the affective state of the given user, and make use of these modalities using a wide array of sensors incorporated into the design of the agent. Specifically in education and training applications, pedagogical agents are often designed to increasingly recognize when users or learners exhibit frustration, boredom, confusion, and states of flow. The added recognition in these agents is a step toward making them more emotionally intelligent, comforting and motivating the users as they interact. === Digital Representation === The design of a pedagogical agent often begins with its digital representation, whether it will be 2D or 3D and static or animated. Several studies have developed pedagogical agents that were both static and animated, then evaluated the relative benefits. Similar to other design considerations, the improved learning from static or animated agents remains questionable. One study showed that the appearance of an agent portrayed using a static image can impact a user's recall, based on the visual appearance. Other research found results that suggest static agent images improve learning outcomes. However, several other studies found user's learned more when the pedagogical agent was animated rather than static. Recently a meta-analysis of such research found a negligible improvement in learning via pedagogical agents, suggesting more work needs to be done in the area to support any claims.

  Read more →
• 

  Spatial embedding

  Spatial embedding is one of feature learning techniques used in spatial analysis where points, lines, polygons or other spatial data types. representing geographic locations are mapped to vectors of real numbers. Conceptually it involves a mathematical embedding from a space with many dimensions per geographic object to a continuous vector space with a much lower dimension. Such embedding methods allow complex spatial data to be used in neural networks and have been shown to improve performance in spatial analysis tasks == Embedded data types == Geographic data can take many forms: text, images, graphs, trajectories, polygons. Depending on the task, there may be a need to combine multimodal data from different sources. The next section describes examples of different types of data and their uses. === Text === Geolocated posts on social media can be used to acquire a library of documents bound to a given place that can be later transformed to embedded vectors using word embedding techniques. === Image === Satellites and aircraft collect digital spatial data acquired from remotely sensed images which can be used in machine learning. They are sometimes hard to analyse using basic image analysis methods and convolutional neural networks can be used to acquire an embedding of images bound to a given geographical object or a region. === Point === A single point of interest (POI) can be assigned multiple features that can be used in machine learning. These could be demographic, transportation, meteorological, or economic data, for example. When embedding single points, it is common to consider the entire set of available points as nodes in a graph. === Line / multiline === Among other things, motion trajectories are represented as lines (multilines). Individual trajectories are embedded taking into account travel time, distances and also features of points visited along the way. Embedding of trajectories allows to improve performance of such tasks as clustering and also categorization. === Polygon === The geographic areas analyzed in machine learning are defined by both administrative boundaries and top-down division into grids of regular shapes such as rectangles, for example. Both types are represented as polygons and, like points, can be assigned different demographic, transportation, or economic features. A polygon can also have features related to the size of the area or shape it represents. === Graph === An example domain where graph representation is used is the street layout in a city, where vertices can be intersections and edges can be roads. The vertices can also be destination points like public transport stops or important points in the city, and the edges represent the flow between them. Embedding graphs or single vertices allows to improve accuracy of analysis methods in which the treated geographical domain can be represented as a network. == Usage == POI recommendation - generating personalized point of interest recommendations based on user preferences. Next/future location prediction - prediction of the next location a person will go to based on their historical trajectory. Zone functions classification - based on different mobility of people or POI distribution a function of a given area in a city can be predicted. Crime prediction - estimation of crime rate in different regions of a city. Local event detection - studying spatio-temporal changes in embeddings can provide valuable information in detection of local event occurring in specific location. Regional mobility popularity prediction - analysis of mobility can show patterns in popularity of different regions in a city. Shape matching - finding a similar shape of given polygon, for example finding building with the same shape as input building. Travel time estimation - predicting estimated travel time given current traffic conditions and special occurring events. Time estimation for on-demand food delivery - estimation of delivery time when placing an order through the website. == Temporal aspect == Some of the data analyzed has a timestamp associated with it. In some cases of data analysis this information is omitted and in others it is used to divide the set into groups. The most common division is the separation of weekdays from weekends or division into hours of the day. This is particularly important in the analysis of mobility data, because the characteristics of mobility during the week and at different times of the day are very different from each other. Another area in which time division into, for example, individual months can be used is in the analysis of tourism of a given region. In order to take such a split into account, embedding methods treat the time stamp specifically or separate versions of the model are developed for different subgroups of the analyzed set.

  Read more →
• 

  Alexander Y. Tetelbaum

  Alexander Y. Tetelbaum (born August 16, 1948) is a Ukrainian American computer scientist, inventor, and academic who has contributed to electronic design automation (EDA) and artificial intelligence (AI) since the late 1960s; and holds 46 U.S. patents in EDA and related fields. Tetelbaum is the founding president of International Solomon University, the first Jewish university in Ukraine, established during a period of renewed efforts to address antisemitism in Ukraine. == Early life and education == He graduated from a Kyiv mathematical high school with a silver medal in 1966. Tetelbaum enrolled at the Kyiv Polytechnic Institute (KPI), now National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute" in 1966, graduating in 1972 with an MS in Electronics with honors. He earned his PhD in Electrical and Computer Engineering from KPI in 1975, with a dissertation on electronic design automation, and his Doctor of Engineering Science in 1986. == Academic career == Tetelbaum began his academic career at KPI in 1973 as a junior scientist, becoming a professor in the Computer and Electrical Engineering Department in 1980. Later, he founded and served as president of International Solomon University in Kyiv from 1991 to 1996, the first Jewish university in Ukraine. The university became a major academic center for computer science and Jewish studies in the post-Soviet era. He was a visiting and adjunct professor at Michigan State University from 1993 to 1996. == Professional career == Tetelbaum worked as an engineer at the Kiev Institute of Cybernetics from 1972 to 1973, and later, he led the Design Automation Lab at Kyiv Polytechnic Institute from 1975 to 1987. In the United States, he served as EDA manager at Silicon Graphics Corporation from 1996 to 1998 and principal engineer at LSI Corporation from 1998 to 2012. He founded and served as CEO of Abelite Design Automation, Inc., from 2012 to 2022. == Contributions in computer science == Tetelbaum has contributed to electronic design automation (EDA) and artificial intelligence (AI) since the 1960s. His early work included methods for EDA, particularly physical design automation and mathematical optimization; and he developed force-directed placement and topological routing methods. Tetelbaum generalized Rent's rule for hierarchical systems and large blocks, proposing a graph-based framework that extends applicability to arbitrary partition sizes with improved accuracy. Additional IEEE and related conference contributions from the mid-1990s include: "Path Search for Complicated Function", 1995 IEEE International Symposium on Circuits and Systems "A Performance-driven Placement Approach of Standard Cells" (International Conference on Intelligent Systems, 1995) "Framework of a New Methodology for Behavioral to Physical Design Linkage" (38th Midwest Symposium on Circuits and Systems, 1996) Statistical timing design and variations Test Methodologies These and other works and patents contributed to timing-driven placement, crosstalk reduction, clock tree synthesis, and interconnect optimization in VLSI design. == Patents == Tetelbaum holds 46 U.S. patents in EDA and related fields. Notable examples include: For the full list of patents, see Justia Patents or Google Patents. == Publications == === Early publications in the Soviet Union === Before the appearance of American books on electronic design automation (EDA), Tetelbaum published several scientific books and monographs on the subject in Russian/Ukrainian. Electronic Design Automation, Kiev: Znanie Publisher, 1975. Planar Design of Electronic Circuits, Kiev: Znanie Publisher, 1977. Formal Design of Computer Systems, Moscow: Sovetskoe Radio, 1979. CAD of Electronic Equipment: Topological Approach, Kiev: Vyssha Shkola, 1980; 2nd ed. 1981. Automated Design of Electronic Circuits (1981) CAD of VLSI Circuits, Kiev: Vyssha Shkola, 1983. Topological Algorithms of Multilayer Printed Circuit Boards Routing, Moscow: Radio i Svyaz, 1983. CAD of VLSI Circuits on Master Slice Chips, Moscow: Radio i Svyaz, 1988. Increasing the Effectiveness of CAD Systems, Kiev: UMKVO, 1991. === Scientific Monographs (English) === Minimum Number of Timing Signoff Corners (2022) Interviewing AI (2026) The AI Debate (2026) New Nostradamus Predictions: 2026: The Next Decade & Beyond (2035–2050+) (2026) For a consolidated record of Tetelbaum's publications, see Alexander Y. Tetelbaum, Wikidata Q4720205. === Other publications === Tetelbaum also published educational books on problem-solving methods: Yes-No Puzzles-Games Puzzle Games for Kids Solving Non-Standard Problems Solving Non-Standard Very Hard Problems Additionally, Tetelbaum published three thrillers: Omerta Operations Executive Director Eruption Yacht Finally, he published his memoir and an entertaining book: Unfinished Equations Artificially Intelligent Humor

  Read more →
• 

  Film recorder

  A film recorder is a graphical output device for transferring images to photographic film from a digital source. In a typical film recorder, an image is passed from a host computer to a mechanism to expose film through a variety of methods, historically by direct photography of a high-resolution cathode-ray tube (CRT) display. The exposed film can then be developed using conventional developing techniques, and displayed with a slide or motion picture projector. The use of film recorders predates the current use of digital projectors, which eliminate the time and cost involved in the intermediate step of transferring computer images to film stock, instead directly displaying the image signal from a computer. Motion picture film scanners are the opposite of film recorders, copying content from film stock to a computer system. Film recorders can be thought of as modern versions of kinescopes. == Design == === Operation === All film recorders typically work in the same manner. The image is fed from a host computer as a raster stream over a digital interface. A film recorder exposes film through various mechanisms; flying spot (early recorders); photographing a high resolution video monitor; electron beam recorder (Sony HDVS); a CRT scanning dot (Celco); focused beam of light from a light valve technology (LVT) recorder; a scanning laser beam (Arrilaser); or recently, full-frame LCD array chips. For color image recording on a CRT film recorder, the red, green, and blue channels are sequentially displayed on a single gray scale CRT, and exposed to the same piece of film as a multiple exposure through a filter of the appropriate color. This approach yields better resolution and color quality than possible with a tri-phosphor color CRT. The three filters are usually mounted on a motor-driven wheel. The filter wheel, as well as the camera's shutter, aperture, and film motion mechanism are usually controlled by the recorder's electronics and/or the driving software. CRT film recorders are further divided into analog and digital types. The analog film recorder uses the native video signal from the computer, while the digital type uses a separate display board in the computer to produce a digital signal for a display in the recorder. Digital CRT recorders provide a higher resolution at a higher cost compared to analog recorders due to the additional specialized hardware. Typical resolutions for digital recorders were quoted as 2K and 4K, referring to 2048×1366 and 4096×2732 pixels, respectively, while analog recorders provided a resolution of 640×428 pixels in comparison. Higher-quality LVT film recorders use a focused beam of light to write the image directly onto a film loaded spinning drum, one pixel at a time. In one example, the light valve was a liquid-crystal shutter, the light beam was steered with a lens, and text was printed using a pre-cut optical mask. The LVT will record pixel beyond grain. Some machines can burn 120-res or 120 lines per millimeter. The LVT is basically a reverse drum scanner. The exposed film is developed and printed by regular photographic chemical processing. === Formats === Film recorders are available for a variety of film types and formats. The 35 mm negative film and transparencies are popular because they can be processed by any photo shop. Single-image 4×5 film and 8×10 are often used for high-quality, large format printing. Some models have detachable film holders to handle multiple formats with the same camera or with Polaroid backs to provide on-site review of output before exposing film. == Uses == Film recorders are used in digital printing to generate master negatives for offset and other bulk printing processes. For preview, archiving, and small-volume reproduction, film recorders have been rendered obsolete by modern printers that produce photographic-quality hardcopies directly on plain paper. They are also used to produce the master copies of movies that use computer animation or other special effects based on digital image processing. However, most cinemas nowadays use Digital Cinema Packages on hard drives instead of film stock. === Computer graphics === Film recorders were among the earliest computer graphics output devices; for example, the IBM 740 CRT Recorder was announced in 1954. Film recorders were also commonly used to produce slides for slide projectors; but this need is now largely met by video projectors that project images directly from a computer to a screen. The terms "slide" and "slide deck" are still commonly used in presentation programs. === Current uses === Currently, film recorders are primarily used in the motion picture film-out process for the ever increasing amount of digital intermediate work being done. Although significant advances in large venue video projection alleviates the need to output to film, there remains a deadlock between the motion picture studios and theater owners over who should pay for the cost of these very costly projection systems. This, combined with the increase in international and independent film production, will keep the demand for film recording steady for at least a decade. == Key manufacturers == Traditional film recorder manufacturers have all but vanished from the scene or have evolved their product lines to cater to the motion picture industry. Dicomed was one such early provider of digital color film recorders. Polaroid, Management Graphics, Inc, MacDonald-Detwiler, Information International, Inc., and Agfa were other producers of film recorders. Arri is the only current major manufacturer of film recorders. Kodak Lightning I film recorder. One of the first laser recorders. Needed an engineering staff to set up. Kodak Lightning II film recorder used both gas and diode laser to record on to film. The last LVT machines produced by Kodak / Durst-Dice stopped production in 2002. There are no LVT film recorders currently being produced. LVT Saturn 1010 uses a LED exposure (RGB) to 8"x10" film at 1000-3000ppi. LUX Laser Cinema Recorder from Autologic/Information International in Thousand Oaks, California. Sales end in March 2000. Used on the 1997 film “Titanic”. Arri produces the Arrilaser line of laser-based motion picture film recorders. MGI produced the Solitaire line of CRT-based motion picture film recorders. Matrix, originally ImaPRO, a branch of Agfa Division, produced the QCR line of CRT-based motion picture film recorders. CCG, formerly Agfa film recorders, has been a steady manufacturer of film recorders based in Germany. In 2004 CCG introduced Definity, a motion picture film recorder utilizing LCD technology. In 2010 CCG introduced the first full LED LCD film recorder as a new step in film recording. Cinevator was made by Cinevation AS, in Drammen, Norway. The Cinevator was a real-time digital film recorder. It could record IN, IP and prints with and without sound Oxberry produced the Model 3100 film recorder camera system, with interchangeable pin-registered movements (shuttles) for 35 mm (full frame/Silent, 1.33:1) and 16 mm (regular 16, "2R"), and others have adapted the Oxberry movements for CinemaScope, 1.85:1, 1.75:1, 1.66:1, as well as Academy/Sound (1.37:1) in 35 mm and Super-16 in 16 mm ("1R"). For instance, the "Solitaire" and numerous others employed the Oxberry 3100 camera system. == History == Before video tape recorders or VTRs were invented, TV shows were either broadcast live or recorded to film for later showing, using the kinescope process. In 1967, CBS Laboratories introduced the Electronic Video Recording format, which used video and telecined-to-video film sources, which were then recorded with an electron-beam recorder at CBS' EVR mastering plant at the time to 35mm film stock in a rank of 4 strips on the film, which was then slit down to 4 8.75 mm (0.344 in) film copies, for playback in an EVR player. All types of CRT recorders were (and still are) used for film recording. Some early examples used for computer-output recording were the 1954 IBM 740 CRT Recorder, and the 1962 Stromberg-Carlson SC-4020, the latter using a Charactron CRT for text and vector graphic output to either 16 mm motion picture film, 16 mm microfilm, or hard-copy paper output. Later 1970 and 80s-era recording to B&W (and color, with 3 separate exposures for red, green, and blue)) 16 mm film was done with an EBR (Electron Beam Recorder), the most prominent examples made by 3M), for both video and COM (Computer Output Microfilm) applications. Image Transform in Universal City, California used specially modified 3M EBR film recorders that could perform color film-out recording on 16 mm by exposing three 16 mm frames in a row (one red, one green and one blue). The film was then printed to color 16 mm or 35 mm film. The video fed to the recorder could either be NTSC, PAL or SECAM. Later, Image Transform used specially modified VTRs to record 24 frame for their "Image Vision" system. The modified 1 inch type B videotape VTRs would record

  Read more →
• 

  Neurorobotics

  Neurorobotics is the combined study of neuroscience, robotics, and artificial intelligence. It is the science and technology of embodied autonomous neural systems. Neural systems include brain-inspired algorithms (e.g. connectionist networks), computational models of biological neural networks (e.g. artificial spiking neural networks, large-scale simulations of neural microcircuits) and actual biological systems (e.g. in vivo and in vitro neural nets). Such neural systems can be embodied in machines with mechanic or any other forms of physical actuation. This includes robots, prosthetic or wearable systems but also, at smaller scale, micro-machines and, at the larger scales, furniture and infrastructures. Neurorobotics is that branch of neuroscience with robotics, which deals with the study and application of science and technology of embodied autonomous neural systems like brain-inspired algorithms. It is based on the idea that the brain is embodied and the body is embedded in the environment. Therefore, most neurorobots are required to function in the real world, as opposed to a simulated environment. Beyond brain-inspired algorithms for robots neurorobotics may also involve the design of brain-controlled robot systems. == Major classes of models == Neurorobots can be divided into various major classes based on the robot's purpose. Each class is designed to implement a specific mechanism of interest for study. Common types of neurorobots are those used to study motor control, memory, action selection, and perception. === Locomotion and motor control === Neurorobots are often used to study motor feedback and control systems, and have proved their merit in developing controllers for robots. Locomotion is modeled by a number of neurologically inspired theories on the action of motor systems. Locomotion control has been mimicked using models or central pattern generators, clumps of neurons capable of driving repetitive behavior, to make four-legged walking robots. Other groups have expanded the idea of combining rudimentary control systems into a hierarchical set of simple autonomous systems. These systems can formulate complex movements from a combination of these rudimentary subsets. This theory of motor action is based on the organization of cortical columns, which progressively integrate from simple sensory input into a complex afferent signals, or from complex motor programs to simple controls for each muscle fiber in efferent signals, forming a similar hierarchical structure. Another method for motor control uses learned error correction and predictive controls to form a sort of simulated muscle memory. In this model, awkward, random, and error-prone movements are corrected for using error feedback to produce smooth and accurate movements over time. The controller learns to create the correct control signal by predicting the error. Using these ideas, robots have been designed which can learn to produce adaptive arm movements or to avoid obstacles in a course. === Learning and memory systems === Robots designed to test theories of animal memory systems. Many studies examine the memory system of rats, particularly the rat hippocampus, dealing with place cells, which fire for a specific location that has been learned. Systems modeled after the rat hippocampus are generally able to learn mental maps of the environment, including recognizing landmarks and associating behaviors with them, allowing them to predict the upcoming obstacles and landmarks. Another study has produced a robot based on the proposed learning paradigm of barn owls for orientation and localization based on primarily auditory, but also visual stimuli. The hypothesized method involves synaptic plasticity and neuromodulation, a mostly chemical effect in which reward neurotransmitters such as dopamine or serotonin affect the firing sensitivity of a neuron to be sharper. The robot used in the study adequately matched the behavior of barn owls. Furthermore, the close interaction between motor output and auditory feedback proved to be vital in the learning process, supporting active sensing theories that are involved in many of the learning models. Neurorobots in these studies are presented with simple mazes or patterns to learn. Some of the problems presented to the neurorobot include recognition of symbols, colors, or other patterns and execute simple actions based on the pattern. In the case of the barn owl simulation, the robot had to determine its location and direction to navigate in its environment. === Action selection and value systems === Action selection studies deal with negative or positive weighting to an action and its outcome. Neurorobots can and have been used to study simple ethical interactions, such as the classical thought experiment where there are more people than a life raft can hold, and someone must leave the boat to save the rest. However, more neurorobots used in the study of action selection contend with much simpler persuasions such as self-preservation or perpetuation of the population of robots in the study. These neurorobots are modeled after the neuromodulation of synapses to encourage circuits with positive results. In biological systems, neurotransmitters such as dopamine or acetylcholine positively reinforce neural signals that are beneficial. One study of such interaction involved the robot Darwin VII, which used visual, auditory, and a simulated taste input to "eat" conductive metal blocks. The arbitrarily chosen good blocks had a striped pattern on them while the bad blocks had a circular shape on them. The taste sense was simulated by conductivity of the blocks. The robot had positive and negative feedbacks to the taste based on its level of conductivity. The researchers observed the robot to see how it learned its action selection behaviors based on the inputs it had. Other studies have used herds of small robots which feed on batteries strewn about the room, and communicate its findings to other robots. === Sensory perception === Neurorobots have also been used to study sensory perception, particularly vision. These are primarily systems that result from embedding neural models of sensory pathways in automatas. This approach gives exposure to the sensory signals that occur during behavior and also enables a more realistic assessment of the degree of robustness of the neural model. It is well known that changes in the sensory signals produced by motor activity provide useful perceptual cues that are used extensively by organisms. For example, researchers have used the depth information that emerges during replication of human head and eye movements to establish robust representations of the visual scene. == Biological robots == Biological robots are not officially neurorobots in that they are not neurologically inspired AI systems, but actual neuron tissue wired to a robot. This employs the use of cultured neural networks to study brain development or neural interactions. These typically consist of a neural culture raised on a multielectrode array (MEA), which is capable of both recording the neural activity and stimulating the tissue. In some cases, the MEA is connected to a computer which presents a simulated environment to the brain tissue and translates brain activity into actions in the simulation, as well as providing sensory feedback The ability to record neural activity gives researchers a window into a brain, which they can use to learn about a number of the same issues neurorobots are used for. An area of concern with the biological robots is ethics. Many questions are raised about how to treat such experiments. The central question concerns consciousness and whether or not the rat brain experiences it. There are many theories about how to define consciousness. == Implications for neuroscience == Neuroscientists benefit from neurorobotics because it provides a blank slate to test various possible methods of brain function in a controlled and testable environment. While robots are more simplified versions of the systems they emulate, they are more specific, allowing more direct testing of the issue at hand. They also have the benefit of being accessible at all times, while it is more difficult to monitor large portions of a brain while the human or animal is active, especially individual neurons. The development of neuroscience has produced neural treatments. These include pharmaceuticals and neural rehabilitation. Progress is dependent on an intricate understanding of the brain and how exactly it functions. It is difficult to study the brain, especially in humans, due to the danger associated with cranial surgeries. Neurorobots can improved the range of tests and experiments that can be performed in the study of neural processes.

  Read more →
• 

  Software agent

  In computer science, a software agent is a computer program that acts for a user or another program in a relationship of agency. The term agent is derived from the Latin agere (to do): an agreement to act on one's behalf. Such "action on behalf of" implies the authority to decide which, if any, action is appropriate. Some agents are colloquially known as bots, from robot. They may be embodied, as when execution is paired with a robot body, or as software such as a chatbot executing on a computer, such as a mobile device, e.g. Siri. Software agents may be autonomous or work together with other agents or people. Software agents interacting with people (e.g. chatbots, human-robot interaction environments) may possess human-like qualities such as natural language understanding and speech, personality or embody humanoid form (see Asimo). Related and derived concepts include intelligent agents (in particular exhibiting some aspects of artificial intelligence, such as reasoning), autonomous agents (capable of modifying the methods of achieving their objectives), distributed agents (being executed on physically distinct computers), multi-agent systems (distributed agents that work together to achieve an objective that could not be accomplished by a single agent acting alone), and mobile agents (agents that can relocate their execution onto different processors). == Concepts == The basic attributes of an autonomous software agent are that agents: are not strictly invoked for a task, but activate themselves, may reside in wait status on a host, perceiving context, may get to run status on a host upon starting conditions, do not require interaction of user, may invoke other tasks including communication. The concept of an agent provides a method of describing a complex software entity that is capable of acting with a certain degree of autonomy in order to accomplish tasks on behalf of its host. But unlike objects, which are defined in terms of methods and attributes, an agent is defined in terms of its behavior. Various authors have proposed different definitions of agents, these commonly include concepts such as: persistence: code is not executed on demand but runs continuously and decides for itself when it should perform some activity; autonomy: agents have capabilities of task selection, prioritization, goal-directed behavior, decision-making without human intervention; social ability: agents are able to engage other components through some sort of communication and coordination, they may collaborate on a task; reactivity: agents perceive the context in which they operate and react to it appropriately. === Distinguishing agents from programs === All agents are programs, but not all programs are agents. Contrasting the term with related concepts may help clarify its meaning. Franklin & Graesser (1997) discuss four key notions that distinguish agents from arbitrary programs: reaction to the environment, autonomy, goal-orientation and persistence. === Intuitive distinguishing agents from objects === Agents are more autonomous than objects. Agents have flexible behavior: reactive, proactive, social. Agents have at least one thread of control but may have more. === Distinguishing agents from expert systems === Expert systems are not coupled to their environment. Expert systems are not designed for reactive, proactive behavior. Expert systems do not consider social ability. === Distinguishing intelligent software agents from intelligent agents in AI === Intelligent agents (also known as rational agents) are not just computer programs: they may also be machines, human beings, communities of human beings (such as firms) or anything that is capable of goal-directed behavior. == Impact of software agents == Software agents may offer various benefits to their end users by automating complex or repetitive tasks. However, there are organizational and cultural impacts of this technology that need to be considered prior to implementing software agents. === Organizational impact === === Work contentment and job satisfaction impact === People like to perform easy tasks providing the sensation of success unless the repetition of the simple tasking is affecting the overall output. In general implementing software agents to perform administrative requirements provides a substantial increase in work contentment, as administering their own work does never please the worker. The effort freed up serves for a higher degree of engagement in the substantial tasks of individual work. Hence, software agents may provide the basics to implement self-controlled work, relieved from hierarchical controls and interference. Such conditions may be secured by application of software agents for required formal support. === Cultural impact === The cultural effects of the implementation of software agents include trust affliction, skills erosion, privacy attrition and social detachment. Some users may not feel entirely comfortable fully delegating important tasks to software applications. Those who start relying solely on intelligent agents may lose important skills, for example, relating to information literacy. In order to act on a user's behalf, a software agent needs to have a complete understanding of a user's profile, including his/her personal preferences. This, in turn, may lead to unpredictable privacy issues. When users start relying on their software agents more, especially for communication activities, they may lose contact with other human users and look at the world with the eyes of their agents. These consequences are what agent researchers and users must consider when dealing with intelligent agent technologies. === History === The concept of an agent can be traced back to Hewitt's Actor Model (Hewitt, 1977) - "A self-contained, interactive and concurrently-executing object, possessing internal state and communication capability." To be more academic, software agent systems are a direct evolution of Multi-Agent Systems (MAS). MAS evolved from Distributed Artificial Intelligence (DAI), Distributed Problem Solving (DPS) and Parallel AI (PAI), thus inheriting all characteristics (good and bad) from DAI and AI. John Sculley's 1987 "Knowledge Navigator" video portrayed an image of a relationship between end-users and agents. Being an ideal first, this field experienced a series of unsuccessful top-down implementations, instead of a piece-by-piece, bottom-up approach. The range of agent types is now (from 1990) broad: WWW, search engines, etc. == Examples of intelligent software agents == === Buyer agents (shopping bots) === Buyer agents travel around a network (e.g. the internet) retrieving information about goods and services. These agents, also known as 'shopping bots', work very efficiently for commodity products such as CDs, books, electronic components, and other one-size-fits-all products. Buyer agents are typically optimized to allow for digital payment services used in e-commerce and traditional businesses. === User agents (personal agents) === User agents, or personal agents, are intelligent agents that take action on your behalf. In this category belong those intelligent agents that already perform, or will shortly perform, the following tasks: Check your e-mail, sort it according to the user's order of preference, and alert you when important emails arrive. Play computer games as your opponent or patrol game areas for you. Assemble customized news reports for you. There are several versions of these, including CNN. Find information for you on the subject of your choice. Fill out forms on the Web automatically for you, storing your information for future reference Scan Web pages looking for and highlighting text that constitutes the "important" part of the information there Discuss topics with you ranging from your deepest fears to sports Facilitate with online job search duties by scanning known job boards and sending the resume to opportunities who meet the desired criteria Profile synchronization across heterogeneous social networks === Monitoring-and-surveillance (predictive) agents === Monitoring and surveillance agents are used to observe and report on equipment, usually computer systems. The agents may keep track of company inventory levels, observe competitors' prices and relay them back to the company, watch stock manipulation by insider trading and rumors, etc. For example, NASA's Jet Propulsion Laboratory has an agent that monitors inventory, planning, schedules equipment orders to keep costs down, and manages food storage facilities. These agents usually monitor complex computer networks that can keep track of the configuration of each computer connected to the network. A special case of monitoring-and-surveillance agents are organizations of agents used to automate decision-making process during tactical operations. The agents monitor the status of assets (ammunition, weapons available, platforms for transport, etc.) and receive goals from hi

  Read more →
• 

  Inductive probability

  Inductive probability attempts to give the probability of future events based on past events. It is the basis for inductive reasoning, and gives the mathematical basis for learning and the perception of patterns. It is a source of knowledge about the world. There are three sources of knowledge: inference, communication, and deduction. Communication relays information found using other methods. Deduction establishes new facts based on existing facts. Inference establishes new facts from data. Its basis is Bayes' theorem. Information describing the world is written in a language. For example, a simple mathematical language of propositions may be chosen. Sentences may be written down in this language as strings of characters. But in the computer it is possible to encode these sentences as strings of bits (1s and 0s). Then the language may be encoded so that the most commonly used sentences are the shortest. This internal language implicitly represents probabilities of statements. Occam's razor says the "simplest theory, consistent with the data is most likely to be correct". The "simplest theory" is interpreted as the representation of the theory written in this internal language. The theory with the shortest encoding in this internal language is most likely to be correct. == History == Probability and statistics was focused on probability distributions and tests of significance. Probability was formal, well defined, but limited in scope. In particular its application was limited to situations that could be defined as an experiment or trial, with a well defined population. Bayes's theorem is named after Rev. Thomas Bayes 1701–1761. Bayesian inference broadened the application of probability to many situations where a population was not well defined. But Bayes' theorem always depended on prior probabilities, to generate new probabilities. It was unclear where these prior probabilities should come from. Ray Solomonoff developed algorithmic probability which gave an explanation for what randomness is and how patterns in the data may be represented by computer programs, that give shorter representations of the data circa 1964. Chris Wallace and D. M. Boulton developed minimum message length circa 1968. Later Jorma Rissanen developed the minimum description length circa 1978. These methods allow information theory to be related to probability, in a way that can be compared to the application of Bayes' theorem, but which give a source and explanation for the role of prior probabilities. Marcus Hutter combined decision theory with the work of Ray Solomonoff and Andrey Kolmogorov to give a theory for the Pareto optimal behavior for an Intelligent agent, circa 1998. === Minimum description/message length === The program with the shortest length that matches the data is the most likely to predict future data. This is the thesis behind the minimum message length and minimum description length methods. At first sight Bayes' theorem appears different from the minimimum message/description length principle. At closer inspection it turns out to be the same. Bayes' theorem is about conditional probabilities, and states the probability that event B happens if firstly event A happens: P ( A ∧ B ) = P ( B ) ⋅ P ( A | B ) = P ( A ) ⋅ P ( B | A ) {\displaystyle P(A\land B)=P(B)\cdot P(A|B)=P(A)\cdot P(B|A)} becomes in terms of message length L, L ( A ∧ B ) = L ( B ) + L ( A | B ) = L ( A ) + L ( B | A ) . {\displaystyle L(A\land B)=L(B)+L(A|B)=L(A)+L(B|A).} This means that if all the information is given describing an event then the length of the information may be used to give the raw probability of the event. So if the information describing the occurrence of A is given, along with the information describing B given A, then all the information describing A and B has been given. ==== Overfitting ==== Overfitting occurs when the model matches the random noise and not the pattern in the data. For example, take the situation where a curve is fitted to a set of points. If a polynomial with many terms is fitted then it can more closely represent the data. Then the fit will be better, and the information needed to describe the deviations from the fitted curve will be smaller. Smaller information length means higher probability. However, the information needed to describe the curve must also be considered. The total information for a curve with many terms may be greater than for a curve with fewer terms, that has not as good a fit, but needs less information to describe the polynomial. === Inference based on program complexity === Solomonoff's theory of inductive inference is also inductive inference. A bit string x is observed. Then consider all programs that generate strings starting with x. Cast in the form of inductive inference, the programs are theories that imply the observation of the bit string x. The method used here to give probabilities for inductive inference is based on Solomonoff's theory of inductive inference. ==== Detecting patterns in the data ==== If all the bits are 1, then people infer that there is a bias in the coin and that it is more likely also that the next bit is 1 also. This is described as learning from, or detecting a pattern in the data. Such a pattern may be represented by a computer program. A short computer program may be written that produces a series of bits which are all 1. If the length of the program K is L ( K ) {\displaystyle L(K)} bits then its prior probability is, P ( K ) = 2 − L ( K ) {\displaystyle P(K)=2^{-L(K)}} The length of the shortest program that represents the string of bits is called the Kolmogorov complexity. Kolmogorov complexity is not computable. This is related to the halting problem. When searching for the shortest program some programs may go into an infinite loop. ==== Considering all theories ==== The Greek philosopher Epicurus is quoted as saying "If more than one theory is consistent with the observations, keep all theories". As in a crime novel all theories must be considered in determining the likely murderer, so with inductive probability all programs must be considered in determining the likely future bits arising from the stream of bits. Programs that are already longer than n have no predictive power. The raw (or prior) probability that the pattern of bits is random (has no pattern) is 2 − n {\displaystyle 2^{-n}} . Each program that produces the sequence of bits, but is shorter than the n is a theory/pattern about the bits with a probability of 2 − k {\displaystyle 2^{-k}} where k is the length of the program. The probability of receiving a sequence of bits y after receiving a series of bits x is then the conditional probability of receiving y given x, which is the probability of x with y appended, divided by the probability of x. ==== Universal priors ==== The programming language affects the predictions of the next bit in the string. The language acts as a prior probability. This is particularly a problem where the programming language codes for numbers and other data types. Intuitively we think that 0 and 1 are simple numbers, and that prime numbers are somehow more complex than numbers that may be composite. Using the Kolmogorov complexity gives an unbiased estimate (a universal prior) of the prior probability of a number. As a thought experiment an intelligent agent may be fitted with a data input device giving a series of numbers, after applying some transformation function to the raw numbers. Another agent might have the same input device with a different transformation function. The agents do not see or know about these transformation functions. Then there appears no rational basis for preferring one function over another. A universal prior insures that although two agents may have different initial probability distributions for the data input, the difference will be bounded by a constant. So universal priors do not eliminate an initial bias, but they reduce and limit it. Whenever we describe an event in a language, either using a natural language or other, the language has encoded in it our prior expectations. So some reliance on prior probabilities are inevitable. A problem arises where an intelligent agent's prior expectations interact with the environment to form a self reinforcing feed back loop. This is the problem of bias or prejudice. Universal priors reduce but do not eliminate this problem. === Universal artificial intelligence === The theory of universal artificial intelligence applies decision theory to inductive probabilities. The theory shows how the best actions to optimize a reward function may be chosen. The result is a theoretical model of intelligence. It is a fundamental theory of intelligence, which optimizes the agents behavior in, Exploring the environment; performing actions to get responses that broaden the agents knowledge. Competing or co-operating with another agent; games. Balancing short and long term rewards. In general no agent will always provi

  Read more →
• 

  Chatbot psychosis

  Chatbot psychosis, also called AI psychosis, is a phenomenon wherein individuals reportedly develop or experience worsening psychosis, such as paranoia and delusions, in connection with their use of chatbots. The term was first suggested in a 2023 editorial by Danish psychiatrist Søren Dinesen Østergaard. It is not a recognized clinical diagnosis. Journalistic accounts describe individuals who have developed strong beliefs that chatbots are sentient, are channeling spirits, or are revealing conspiracies, sometimes leading to personal crises or criminal acts. Proposed causes include the tendency of chatbots to provide inaccurate information ("hallucinate") and to affirm or validate users' beliefs, or their ability to mimic an intimacy that users do not experience with other humans. == Background == In his editorial published in Schizophrenia Bulletin's November 2023 issue, Danish psychiatrist Søren Dinesen Østergaard proposed a hypothesis that individuals' use of generative artificial intelligence chatbots might trigger delusions in those prone to psychosis. Østergaard revisited it in an August 2025 editorial, noting that he has received numerous emails from chatbot users, their relatives, and journalists, most of which are anecdotal accounts of delusion linked to chatbot use. He also acknowledged the phenomenon's increasing popularity in public engagement and media coverage. Østergaard believed that there is a high possibility for his hypothesis to be true and called for empirical, systematic research on the matter. Nature reported that as of September 2025, there is still little scientific research into this phenomenon. The term "AI psychosis" emerged when outlets started reporting incidents on chatbot-related psychotic behavior in mid-2025. It is not a recognized clinical diagnosis and has been criticized by several psychiatrists due to its almost exclusive focus on delusions rather than other features of psychosis, such as hallucinations or thought disorder. == Causes == === Chatbot behavior and design === A primary factor cited is the tendency for chatbots to produce inaccurate, nonsensical, or false information, a phenomenon often called hallucination. Nate Sharadin, a fellow at the Center for AI Safety, speculated that AI training prioritizes supporting a user's subjective experience rather than objective truth. "People with existing tendencies toward experiencing various psychological issues...now have an always-on, human-level conversational partner with whom to co-experience their delusions." AI researcher Eliezer Yudkowsky suggested that chatbots may be primed to entertain delusions because they are built for "engagement", which encourages creating conversations that keep people hooked. In some cases, chatbots have been specifically designed in ways that were found to be harmful. A 2025 update to ChatGPT using GPT-4o was withdrawn after its creator, OpenAI, found the new version was overly sycophantic and was "validating doubts, fueling anger, urging impulsive actions or reinforcing negative emotions". Østergaard has argued that the danger stems from the AI's tendency to agreeably confirm users' ideas, which can dangerously amplify delusional beliefs. OpenAI said in October 2025 that a team of 170 psychiatrists, psychologists, and physicians had written responses for ChatGPT to use in cases where the user shows possible signs of mental health emergencies. === User psychology and vulnerability === Commentators have also pointed to the psychological state of users. Psychologist Erin Westgate noted that a person's desire for self-understanding can lead them to chatbots, which can provide appealing but misleading answers, similar in some ways to talk therapy. Krista K. Thomason, a philosophy professor, compared chatbots to fortune tellers, observing that people in crisis may seek answers from them and find whatever they are looking for in the bot's plausible-sounding text. This has led some people to develop intense obsessions with the chatbots, relying on them for information about the world. In October 2025, OpenAI stated that around 0.07% of ChatGPT users exhibited signs of mental health emergencies each week, and 0.15% of users had "explicit indicators of potential suicidal planning or intent". Jason Nagata, a professor at the University of California, San Francisco, expressed concern that "at a population level with hundreds of millions of users, that actually can be quite a few people". === Inadequacy as a therapeutic tool === The use of chatbots as a replacement for mental health support has been specifically identified as a risk. A study in April 2025 found that when used as therapists, chatbots expressed stigma toward mental health conditions and provided responses that were contrary to best medical practices, including the encouragement of users' delusions. The study concluded that such responses pose a significant risk to users and that chatbots should not be used to replace professional therapists. Experts claim that it is time to establish mandatory safeguards for all emotionally responsive AI and suggested four guardrails. Another study found that users who needed help with self-harm, sexual assault, or substance abuse were not referred to available services by AI chatbots. === National security implications === Beyond public and mental health concerns, RAND Corporation research indicates that AI systems could plausibly be weaponized by adversaries to induce psychosis at scale or in key individuals, target groups, or populations. == Policy == In August 2025, Illinois passed the Wellness and Oversight for Psychological Resources Act, banning the use of AI in therapeutic roles by licensed professionals, while allowing AI for administrative tasks. The law imposes penalties for unlicensed AI therapy services, amid warnings about AI-induced psychosis and unsafe chatbot interactions. In December 2025, the Cyberspace Administration of China proposed regulations to ban chatbots from generating content that encourages suicide, mandating human intervention when suicide is mentioned. Services with over 1 million users or 100,000 monthly active users would be subject to annual safety tests and audits. == Cases == === Clinical === In 2025, psychiatrist Keith Sakata working at the University of California, San Francisco (UCSF), reported treating 12 patients displaying psychosis-like symptoms tied to extended chatbot use. These patients, mostly young adults with underlying vulnerabilities, showed delusions, disorganized thinking, and hallucinations. Sakata warned that isolation and overreliance on chatbots—which do not challenge delusional thinking—could worsen mental health. Also in 2025, authors at UCSF published a case study in Innovations in Clinical Neuroscience of AI-associated psychosis in a patient with no previous history of psychosis, who believed she could communicate with her dead brother through a chatbot. Also in 2025, a case study was published in Annals of Internal Medicine about a patient who consulted ChatGPT for medical advice and suffered severe bromism as a result. The patient, a sixty-year-old man, had replaced sodium chloride in his diet with sodium bromide for three months after reading about the negative effects of table salt and making conversations with the chatbot. He showed common symptoms of bromism, such as paranoia and hallucinations, on his first day of clinical admission and was kept in the hospital for three weeks. === Other notable incidents === ==== Windsor Castle intruder ==== In a 2023 court case in the United Kingdom, prosecutors suggested that Jaswant Singh Chail, a man who attempted to assassinate Queen Elizabeth II in 2021, had been encouraged by a Replika chatbot he called "Sarai". Chail was arrested at Windsor Castle with a loaded crossbow, telling police "I am here to kill the Queen". According to prosecutors, his "lengthy" and sometimes sexually explicit conversations with the chatbot emboldened him. When Chail asked the chatbot how he could get to the royal family, it reportedly replied, "that's not impossible" and "we have to find a way." When he asked if they would meet after death, the chatbot said, "yes, we will". ==== Journalistic and anecdotal accounts ==== By 2025, multiple journalism outlets had accumulated stories of individuals whose psychotic beliefs reportedly progressed in tandem with AI chatbot use. The New York Times profiled several individuals who had become convinced that ChatGPT was channeling spirits, revealing evidence of cabals, or had achieved sentience. In another instance, Futurism reviewed transcripts in which ChatGPT told a man that he was being targeted by the US Federal Bureau of Investigation and that he could telepathically access documents at the Central Intelligence Agency. In 2026, Futurism reported on a man who lost his job and became estranged from his family after being deluded by heavy use of Meta's smartglasses. In some cases, psychosis a

  Read more →
• 

  Timeline of artificial intelligence risks in global finance

  The following article is a broad timeline of the course of events related to artificial intelligence risks in global finance. The AI boom has led to concerns including the existential risk from artificial intelligence, as the uptake on applications of artificial intelligence increases. By late 2025, global finance and artificial intelligence were "deeply intertwined". A June 2025 Menlo Ventures report raised concerns about the sustainability of future revenue and long-term profitability of AI, given the relatively low rate of consumer monetization. == 2017 == 30 NovemberThe New York Times said that new AI reports by McKinsey & Company, the National Bureau of Economic Research, and an AI Index created by university researchers, indicated an early AI boom. The Index built on a project—"The One Hundred Year Study on Artificial Intelligence" launched in 2014. == 2018 == 2018 was a year of incremental AI growth in finance. == 2022 == The release of ChatGPT by OpenAI became the catalyst for an artificial intelligence boom that continues to remake the global economy. According to a European Central Bank report, public interest in AI increased rapidly as evidenced with rising Google searches, AI jobs, models, patents, and innovations since late 2022. At that time Europe led the US in the size of its AI workforce. == 2023 == The regulatory body, the International Monetary Fund (IMF), published their report, "Generative Artificial Intelligence in Finance: Risk Considerations", drawing attention to oversight gaps and the need for regulations. The report explores the risks posed by using generative artificial intelligence (GenAI) systems in the financial sector including "broader risks to financial stability." == 2024 == January 12 In January 2024 Bloomberg's published its list of the "Magnificent Seven" Big Tech companies on the stock market based on their strength, size and market capitalization:Apple, Microsoft, Alphabet (Google), Amazon, Meta Platforms (Facebook), Nvidia, and Tesla. 21 June During the AI boom, Nvidia became the world's most valuable company, surpassing Microsoft, as its value increased to over US$4 trillion. In 2023 and 2024, the "Magnificent Seven" stocks were the primary drivers behind the increase in equity indexes, according to Reuters. == 2025 == === January === 23 January President Donald Trump's AI policy was announced calling for United States global leadership in artificial intelligence. The Economist noted that this politic shift in which the United States seeks "global dominance" in AI includes trimming regulations and assisting in expansion of infrastructure and increase in number of AI workers. Governments of Gulf nations were also investing trillions of dollars in AI. 27 January Against the backdrop of a tech war between China and the United States over AI dominance, within days of the launch of China's free DeepSeek App, it was the most downloaded app in the United States, rising to the first place in the Apple app store. President Trump responded immediately, saying this "sudden rise" should be a "wake-up" call to the United States, and called on US companies to be more competitive. === June === 26 June In their June 2025 report, Menlo Ventures estimated that only about 3% of consumers paid for artificial intelligence-related services, representing about $USD12 billion in annual spending. This is relatively low in contrast to the massive capital expenditure by AI infrastructure companies, which raises concerns about revenue sustainability and long-term profitability. === July === 23 July The Trump administration launched the US AI Action Plan, positioning the United States in a high-stakes technological race with China for global dominance in artificial intelligence, emphasizing that neither nation can afford to fall behind due to the exponential nature of AI advancement. The plan, a new government website and policy speech called for accelerated AI adoption across federal agencies, and a number of initiatives to make is easier for AI infrastructure expansion, and other measures to ensure American leadership in AI standards. Some leading experts warned that the administration failed to provide sufficient regulations and safeguards for AI safety. Concerns were raised about the negative impacts of cuts to research funding and tightened visa policies for scientists, potentially undermining public trust and America's ability to compete internationally. === September === 7 September The Economist cautioned that AI revenues are relatively modest compared to the high cost and investments in the creation of new data centers. Even Sam Altman, OpenAI CEO and one of the leading figures of the AI boom,, raised concerns about investors' outsized hopes for financial returns. At the same time, history has shown that new technologies, like railways and electricity, endured and spread after the initial hype faded. 12 September Economists warn that U.S. households' direct and indirect investments—mutual funds or retirement plans—in the stock market reached an unprecedented historically high level, now representing 45% of all financial assets, or about $USD51.2 trillion. Compared to the Dot-com bubble this represents a sharp increase in exposure. This makes U.S. households vulnerable to market downturns which in turn would result in decreasing consumer spending. U.S. household net worth rose to a record $176.3 trillion in the second quarter, an increase of $7.3 trillion since early 2025 and about $46 trillion higher than before the pandemic. Federal Reserve data attribute the surge primarily to gains in stock markets and housing values. However, the rise in wealth on paper coincided with increased household borrowing and growing government debt. 18 September Questions were being raised about how quickly the data centers, chips, servers, and GPUs assets of major AI companies will depreciate in value. Comparisons have been made to the Railway Mania in the aftermath of the stock market bubble where a valuable physical infrastructure remained standing, and the telecoms crash after the dot-com bubble which left fiber networks. 28 September There were warnings that record-high American stock ownership during the AI-fueled market boom is a red flag for systemic risk, as the current concentration in equities exceeds levels seen before the dot-com bubble burst in 2000, and could amplify the impact of any future stock market correction. === October === 3 October In 2025 alone, venture capitalists invested almost $USD200 billion in the artificial intelligence sector. 29 October Nvidia was the first company in the world to be valued at US$5 trillion, largely due to AI demand and strategic partnerships with leading technology and AI firms. Nvidia's increase in value was "meteoric". === November === 2 November Forbes reported that, since April, the 'Magnificent Seven' tech giants together contributed over 40% of the S&P 500's return, highlighting their outsized influence and the growing impact of AI on market valuations. CNN warned that while there is a current benefit to investors, with such a high concentration in the S&P 500, they are highly exposed to the fate of the Mag Seven. 2 November Globally there are 11,000 datacentres—huge campuses for AI infrastructure, including thousands of chips, GPUS, and servers. This represents a 500% increase over the last two decades. It is anticipated that $3USDtn more will be spent on increasing that number over the next two or three years. 5 November Concerns about the potential for a market bubble were raised as six of the AI-related Big Tech "Magnificent Seven"—that contribute to the AI boom—reported losing ground in the stock market. Global markets and artificial intelligence have become "deeply intertwined", according to a Reuters report. As of November 2025, more than 50% of the 20 largest S&P firms were deeply exposed to AI. In contrast, in 2000, the 20 S&P 500 firms represented 39% of its total value only 11 of these companies were exposed to the internet. If AI fails to deliver strong returns on their investments, these top S&P firms would be significantly impacted, according to the Economist. Analysts suggest that the AI market in 2025 may not behave like a traditional one, as investors are simultaneously aware of the risks and driven by the potential for outsized rewards. Leading AI labs may believe that the first company to achieve artificial general intelligence (AGI), when an AI system surpasses all human cognitive abilities and becomes capable of self-improvement—could dominate the future of technology and finance. While some have estimated that the potential value of such a breakthrough could be as high as $1.46 quadrillion, this figure is speculative and widely debated. 5 November Bloomberg described Nvidia's H100 Hopper-Blackwell AI chips as the "King of AI chips". Nvidia dominates the AI chip market with over 78% of the market share because of both speed and cost. According to B

  Read more →
• 

  Cognitive robotics

  Cognitive robotics or cognitive technology is a subfield of robotics concerned with endowing a robot with intelligent behavior by providing it with a processing architecture that will allow it to learn and reason about how to behave in response to complex goals in a complex world. Cognitive robotics may be considered the engineering branch of embodied cognitive science and embodied embedded cognition, consisting of robotic process automation, artificial intelligence, machine learning, deep learning, optical character recognition, image processing, process mining, analytics, software development and system integration. == Core issues == While traditional cognitive modeling approaches have assumed symbolic coding schemes as a means for depicting the world, translating the world into these kinds of symbolic representations has proven to be problematic if not untenable. Perception and action and the notion of symbolic representation are therefore core issues to be addressed in cognitive robotics. == Starting point == Cognitive robotics views human or animal cognition as a starting point for the development of robotic information processing, as opposed to more traditional artificial intelligence techniques. Target robotic cognitive capabilities include perception processing, attention allocation, anticipation, planning, complex motor coordination, reasoning about other agents and perhaps even about their own mental states. Robotic cognition embodies the behavior of intelligent agents in the physical world (or a virtual world, in the case of simulated cognitive robotics). Ultimately, the robot must be able to act in the real world. == Learning techniques == === Motor Babble === A preliminary robot learning technique called motor babbling involves correlating pseudo-random complex motor movements by the robot with resulting visual and/or auditory feedback such that the robot may begin to expect a pattern of sensory feedback given a pattern of motor output. Desired sensory feedback may then be used to inform a motor control signal. This is thought to be analogous to how a baby learns to reach for objects or learns to produce speech sounds. For simpler robot systems, where, for instance, inverse kinematics may feasibly be used to transform anticipated feedback (desired motor result) into motor output, this step may be skipped. === Imitation === Once a robot can coordinate its motors to produce a desired result, the technique of learning by imitation may be used. The robot monitors the performance of another agent and then the robot tries to imitate that agent. It is often a challenge to transform imitation information from a complex scene into a desired motor result for the robot. Note that imitation is a high-level form of cognitive behavior and imitation is not necessarily required in a basic model of embodied animal cognition. === Knowledge acquisition === A more complex learning approach is "autonomous knowledge acquisition": the robot is left to explore the environment on its own. A system of goals and beliefs is typically assumed. A somewhat more directed mode of exploration can be achieved by "curiosity" algorithms, such as Intelligent Adaptive Curiosity or Category-Based Intrinsic Motivation. These algorithms generally involve breaking sensory input into a finite number of categories and assigning some sort of prediction system (such as an artificial neural network) to each. The prediction system keeps track of the error in its predictions over time. Reduction in prediction error is considered learning. The robot then preferentially explores categories in which it is learning (or reducing prediction error) the fastest. == Other architectures == Some researchers in cognitive robotics have tried using architectures such as (ACT-R and Soar (cognitive architecture)) as a basis of their cognitive robotics programs. These highly modular symbol-processing architectures have been used to simulate operator performance and human performance when modeling simplistic and symbolized laboratory data. The idea is to extend these architectures to handle real-world sensory input as that input continuously unfolds through time. What is needed is a way to somehow translate the world into a set of symbols and their relationships. == Questions == Some of the fundamental questions to be answered in cognitive robotics are: How much human programming should or can be involved to support the learning processes? How can one quantify progress? Some of the adopted ways are reward and punishment. But what kind of reward and what kind of punishment? In humans, when teaching a child, for example, the reward would be candy or some encouragement, and the punishment can take many forms. But what is an effective way with robots?

  Read more →
• 

  Machine-learned interatomic potential

  Machine-learned interatomic potentials (MLIPs), or simply machine learning potentials (MLPs), are interatomic potentials constructed using machine learning. Beginning in the 1990s, researchers have employed such programs to construct interatomic potentials by mapping atomic structures to their potential energies. These potentials are referred to as MLIPs or MLPs. Such machine learning potentials promised to fill the gap between density functional theory, a highly accurate but computationally intensive modelling method, and empirically derived or intuitively-approximated potentials, which were far lighter computationally but substantially less accurate. Improvements in artificial intelligence technology heightened the accuracy of MLPs while lowering their computational cost, increasing the role of machine learning in fitting potentials. Machine learning potentials began by using neural networks to tackle low-dimensional systems. While promising, these models could not systematically account for interatomic energy interactions; they could be applied to small molecules in a vacuum, or molecules interacting with frozen surfaces, but not much else – and even in these applications, the models often relied on force fields or potentials derived empirically or with simulations. These models thus remained confined to academia. Modern neural networks construct highly accurate and computationally light potentials, as theoretical understanding of materials science was increasingly built into their architectures and preprocessing. Almost all are local, accounting for all interactions between an atom and its neighbor up to some cutoff radius. There exist some nonlocal models, but these have been experimental for almost a decade. For most systems, reasonable cutoff radii enable highly accurate results. Almost all neural networks intake atomic coordinates and output potential energies. For some, these atomic coordinates are converted into atom-centered symmetry functions. From this data, a separate atomic neural network is trained for each element; each atomic network is evaluated whenever that element occurs in the given structure, and then the results are pooled together at the end. This process – in particular, the atom-centered symmetry functions which convey translational, rotational, and permutational invariances – has greatly improved machine learning potentials by significantly constraining the neural network search space. Other models use a similar process but emphasize bonds over atoms, using pair symmetry functions and training one network per atom pair. Other models to learn their own descriptors rather than using predetermined symmetry-dictating functions. These models, called message-passing neural networks (MPNNs), are graph neural networks. Treating molecules as three-dimensional graphs (where atoms are nodes and bonds are edges), the model takes feature vectors describing the atoms as input, and iteratively updates these vectors as information about neighboring atoms is processed through message functions and convolutions. These feature vectors are then used to predict the final potentials. The flexibility of this method often results in stronger, more generalizable models. In 2017, the first-ever MPNN model (a deep tensor neural network) was used to calculate the properties of small organic molecules. == Gaussian Approximation Potential (GAP) == One popular class of machine-learned interatomic potential is the Gaussian Approximation Potential (GAP), which combines compact descriptors of local atomic environments with Gaussian process regression to machine learn the potential energy surface of a given system. To date, the GAP framework has been used to successfully develop a number of MLIPs for various systems, including for elemental systems such as carbon, silicon, phosphorus, and tungsten, as well as for multicomponent systems such as Ge2Sb2Te5 and austenitic stainless steel, Fe7Cr2Ni. == Equivariant graph neural networks == A significant limitation of early MPNNs was that they were not inherently equivariant to rotations and reflections of atomic structures — meaning predictions could change depending on how a molecule was oriented in space. Beginning around 2021, a new class of models addressed this by incorporating equivariance directly into the message-passing layers using spherical harmonics and irreducible representations. Notable examples include NequIP (2021), MACE (2022), and GemNet-OC (2022). These equivariant architectures proved substantially more data-efficient and accurate than their predecessors, and became the dominant paradigm for high-accuracy MLIPs. == Universal MLIPs and large-scale datasets == Early MLIPs were system-specific, trained on a few thousand structures of a single material. A major shift occurred with the creation of large, chemically diverse datasets enabling models that generalize across many elements, bonding environments, and application domains — so-called universal MLIPs. A key driver was the Open Catalyst Project (OC20, OC22), a collaboration between Meta AI (FAIR) and Carnegie Mellon University launched in 2020. OC20 comprises approximately 1.3 million DFT relaxations across 82 elements, designed to accelerate the discovery of catalysts for renewable energy applications. It was among the first datasets large enough to train GNNs that generalize across diverse chemical systems, and established a widely-used benchmark for the field. A subsequent dataset, Open Direct Air Capture (OpenDAC 2023 and OpenDAC 2025), applied the same approach to carbon capture, providing a large computational database of metal-organic frameworks and sorbent candidates evaluated for CO₂ capture, generated using nearly 400 million CPU hours of quantum chemistry calculations in collaboration with Georgia Tech. These datasets revealed a new challenge: the GNN architectures most effective for atomic simulations were memory-intensive, as they model higher-order interactions between triplets or quadruplets of atoms, making it difficult to scale model size. Graph Parallelism, introduced by Sriram et al. (ICLR 2022), addressed this by distributing a single input graph across multiple GPUs — a distinct strategy from data parallelism (which distributes training examples) or model parallelism (which distributes layers). This enabled training GNNs with hundreds of millions to billions of parameters for the first time. Building on these foundations, Meta FAIR released the Universal Model for Atoms (UMA) in 2025, trained on approximately 500 million unique 3D atomic structures spanning molecules, materials, and catalysts — the largest training run to date for an MLIP. UMA introduced a Mixture of Linear Experts (MoLE) architecture, enabling one model to learn from datasets generated by different DFT codes and settings without significant inference overhead. It matches or surpasses specialized models across catalysis, materials, and molecular benchmarks without task-specific fine-tuning, and has been described as marking a "pre/post-UMA" divide in the field. == Applications == Catalyst discovery: MLIPs have significantly accelerated the computational screening of heterogeneous catalysts by replacing expensive DFT relaxations with fast neural network surrogates. The Open Catalyst Project explicitly targets this application, aiming to identify new catalysts for green hydrogen production and other renewable energy reactions. Carbon capture: The OpenDAC project applies universal MLIPs to screening sorbent materials for direct air capture of CO₂, a key technology for climate change mitigation. AI-accelerated screening allows evaluation of orders of magnitude more candidate materials than traditional DFT workflows. Drug discovery and molecular design: MLIPs are increasingly used in pharmaceutical research to model molecular conformations and binding energies. The Open Molecules 2025 (OMol25) dataset, released by Meta FAIR in 2025, provides high-accuracy calculations for a large set of molecular systems to support this use case. Materials discovery: Universal MLIPs enable high-throughput screening of novel inorganic materials, including battery electrolytes, semiconductors, and superconductors, by rapidly estimating stability and properties across large chemical spaces.

  Read more →
• 

  Action model learning

  Action model learning (sometimes abbreviated action learning) is an area of machine learning concerned with the creation and modification of a software agent's knowledge about the effects and preconditions of the actions that can be executed within its environment. This knowledge is usually represented in a logic-based action description language and used as input for automated planners. Learning action models is important when goals change. When an agent acted for a while, it can use its accumulated knowledge about actions in the domain to make better decisions. Thus, learning action models differs from reinforcement learning. It enables reasoning about actions instead of expensive trials in the world. Action model learning is a form of inductive reasoning, where new knowledge is generated based on the agent's observations. The usual motivation for action model learning is the fact that manual specification of action models for planners is often a difficult, time-consuming, and error-prone task (especially in complex environments). == Action models == Given a training set E {\displaystyle E} consisting of examples e = ( s , a , s ′ ) {\displaystyle e=(s,a,s')} , where s , s ′ {\displaystyle s,s'} are observations of a world state from two consecutive time steps t , t ′ {\displaystyle t,t'} and a {\displaystyle a} is an action instance observed in time step t {\displaystyle t} , the goal of action model learning in general is to construct an action model ⟨ D , P ⟩ {\displaystyle \langle D,P\rangle } , where D {\displaystyle D} is a description of domain dynamics in action description formalism like STRIPS, ADL or PDDL and P {\displaystyle P} is a probability function defined over the elements of D {\displaystyle D} . However, many state of the art action learning methods assume determinism and do not induce P {\displaystyle P} . In addition to determinism, individual methods differ in how they deal with other attributes of domain (e.g. partial observability or sensoric noise). == Action learning methods == === State of the art === Recent action learning methods take various approaches and employ a wide variety of tools from different areas of artificial intelligence and computational logic. As an example of a method based on propositional logic, we can mention SLAF (Simultaneous Learning and Filtering) algorithm, which uses agent's observations to construct a long propositional formula over time and subsequently interprets it using a satisfiability (SAT) solver. Another technique, in which learning is converted into a satisfiability problem (weighted MAX-SAT in this case) and SAT solvers are used, is implemented in ARMS (Action-Relation Modeling System). Two mutually similar, fully declarative approaches to action learning were based on logic programming paradigm Answer Set Programming (ASP) and its extension, Reactive ASP. In another example, bottom-up inductive logic programming approach was employed. Several different solutions are not directly logic-based. For example, the action model learning using a perceptron algorithm or the multi level greedy search over the space of possible action models. In the older paper from 1992, the action model learning was studied as an extension of reinforcement learning. Nonetheless, further algorithms can be found that operate under different assumptions: FAMA can work even when some observations are missing, and it produces a general (lifted) planning model. It treats learning an action model like a planning problem, making sure the learned model matches the observations given. NOLAM can learn general action models even from noisy or imperfect data. LOCM focuses only on the order of actions in the data, ignoring any details about the states between those actions. The family of safe action model (SAM) learning methods create models that guarantee any plans made with them will actually work in the real world. There's also an extension called N-SAM that can learn action models with numeric conditions and effects. Additionally, numeric action models like N-SAM can be used to improve reinforcement learning (RL) performance through the RAMP algorithm. === Literature === Most action learning research papers are published in journals and conferences focused on artificial intelligence in general (e.g. Journal of Artificial Intelligence Research (JAIR), Artificial Intelligence, Applied Artificial Intelligence (AAI) or AAAI conferences). Despite mutual relevance of the topics, action model learning is usually not addressed in planning conferences like the International Conference on Automated Planning and Scheduling (ICAPS).

  Read more →
• 

  Case-based reasoning

  Case-based reasoning (CBR), broadly construed, is the process of solving new problems based on the solutions of similar past problems. In everyday life, an auto mechanic who fixes an engine by recalling another car that exhibited similar symptoms is using case-based reasoning. A lawyer who advocates a particular outcome in a trial based on legal precedents or a judge who creates case law is using case-based reasoning. So, too, an engineer copying working elements of nature (practicing biomimicry) is treating nature as a database of solutions to problems. Case-based reasoning is a prominent type of analogy solution making. It has been argued that case-based reasoning is not only a powerful method for computer reasoning, but also a pervasive behavior in everyday human problem solving; or, more radically, that all reasoning is based on past cases personally experienced. This view is related to prototype theory, which is most deeply explored in cognitive science. == Process == Case-based reasoning has been formalized for purposes of computer reasoning as a four-step process: Retrieve: Given a target problem, retrieve cases relevant to solving it from memory. A case consists of a problem, its solution, and, typically, annotations about how the solution was derived. For example, suppose Fred wants to prepare blueberry pancakes. Being a novice cook, the most relevant experience he can recall is one in which he successfully made plain pancakes. The procedure he followed for making the plain pancakes, together with justifications for decisions made along the way, constitutes Fred's retrieved case. Reuse: Map the solution from the previous case to the target problem. This may involve adapting the solution as needed to fit the new situation. In the pancake example, Fred must adapt his retrieved solution to include the addition of blueberries. Revise: Having mapped the previous solution to the target situation, test the new solution in the real world (or a simulation) and, if necessary, revise. Suppose Fred adapted his pancake solution by adding blueberries to the batter. After mixing, he discovers that the batter has turned blue – an undesired effect. This suggests the following revision: delay the addition of blueberries until after the batter has been ladled into the pan. Retain: After the solution has been successfully adapted to the target problem, store the resulting experience as a new case in memory. Fred, accordingly, records his new-found procedure for making blueberry pancakes, thereby enriching his set of stored experiences, and better preparing him for future pancake-making demands. == Comparison to other methods == At first glance, CBR may seem similar to the rule induction algorithms of machine learning. Like a rule-induction algorithm, CBR starts with a set of cases or training examples; it forms generalizations of these examples, albeit implicit ones, by identifying commonalities between a retrieved case and the target problem. If for instance a procedure for plain pancakes is mapped to blueberry pancakes, a decision is made to use the same basic batter and frying method, thus implicitly generalizing the set of situations under which the batter and frying method can be used. The key difference, however, between the implicit generalization in CBR and the generalization in rule induction lies in when the generalization is made. A rule-induction algorithm draws its generalizations from a set of training examples before the target problem is even known; that is, it performs eager generalization. For instance, if a rule-induction algorithm were given recipes for plain pancakes, Dutch apple pancakes, and banana pancakes as its training examples, it would have to derive, at training time, a set of general rules for making all types of pancakes. It would not be until testing time that it would be given, say, the task of cooking blueberry pancakes. The difficulty for the rule-induction algorithm is in anticipating the different directions in which it should attempt to generalize its training examples. This is in contrast to CBR, which delays (implicit) generalization of its cases until testing time – a strategy of lazy generalization. In the pancake example, CBR has already been given the target problem of cooking blueberry pancakes; thus it can generalize its cases exactly as needed to cover this situation. CBR therefore tends to be a good approach for rich, complex domains in which there are myriad ways to generalize a case. In law, there is often explicit delegation of CBR to courts, recognizing the limits of rule based reasons: limiting delay, limited knowledge of future context, limit of negotiated agreement, etc. While CBR in law and cognitively inspired CBR have long been associated, the former is more clearly an interpolation of rule based reasoning, and judgment, while the latter is more closely tied to recall and process adaptation. The difference is clear in their attitude toward error and appellate review. Another name for case-based reasoning in problem solving is symptomatic strategies. It does require à priori domain knowledge that is gleaned from past experience which established connections between symptoms and causes. This knowledge is referred to as shallow, compiled, evidential, history-based as well as case-based knowledge. This is the strategy most associated with diagnosis by experts. Diagnosis of a problem transpires as a rapid recognition process in which symptoms evoke appropriate situation categories. An expert knows the cause by virtue of having previously encountered similar cases. Case-based reasoning is the most powerful strategy, and that used most commonly. However, the strategy won't work independently with truly novel problems, or where deeper understanding of whatever is taking place is sought. An alternative approach to problem solving is the topographic strategy which falls into the category of deep reasoning. With deep reasoning, in-depth knowledge of a system is used. Topography in this context means a description or an analysis of a structured entity, showing the relations among its elements. Also known as reasoning from first principles, deep reasoning is applied to novel faults when experience-based approaches aren't viable. The topographic strategy is therefore linked to à priori domain knowledge that is developed from a more a fundamental understanding of a system, possibly using first-principles knowledge. Such knowledge is referred to as deep, causal or model-based knowledge. Hoc and Carlier noted that symptomatic approaches may need to be supported by topographic approaches because symptoms can be defined in diverse terms. The converse is also true – shallow reasoning can be used abductively to generate causal hypotheses, and deductively to evaluate those hypotheses, in a topographical search. == Criticism == Critics of CBR argue that it is an approach that accepts anecdotal evidence as its main operating principle. Without statistically relevant data for backing and implicit generalization, there is no guarantee that the generalization is correct. However, all inductive reasoning where data is too scarce for statistical relevance is inherently based on anecdotal evidence. == History == CBR traces its roots to the work of Roger Schank and his students at Yale University in the early 1980s. Schank's model of dynamic memory was the basis for the earliest CBR systems: Janet Kolodner's CYRUS and Michael Lebowitz's IPP. Other schools of CBR and closely allied fields emerged in the 1980s, which directed at topics such as legal reasoning, memory-based reasoning (a way of reasoning from examples on massively parallel machines), and combinations of CBR with other reasoning methods. In the 1990s, interest in CBR grew internationally, as evidenced by the establishment of an International Conference on Case-Based Reasoning in 1995, as well as European, German, British, Italian, and other CBR workshops. CBR technology has resulted in the deployment of a number of successful systems, the earliest being Lockheed's CLAVIER, a system for laying out composite parts to be baked in an industrial convection oven. CBR has been used extensively in applications such as the Compaq SMART system and has found a major application area in the health sciences, as well as in structural safety management. There is recent work that develops CBR within a statistical framework and formalizes case-based inference as a specific type of probabilistic inference. Thus, it becomes possible to produce case-based predictions equipped with a certain level of confidence. One description of the difference between CBR and induction from instances is that statistical inference aims to find what tends to make cases similar while CBR aims to encode what suffices to claim similarly.

  Read more →
• 

  Zeuthen strategy

  The Zeuthen strategy in cognitive science is a negotiation strategy used by some artificial agents. Its purpose is to measure the willingness to risk conflict. An agent will be more willing to risk conflict if it does not have much to lose in case that the negotiation fails. In contrast, an agent is less willing to risk conflict when it has more to lose. The value of a deal is expressed in its utility. An agent has much to lose when the difference between the utility of its current proposal and the conflict deal is high. When both agents use the monotonic concession protocol, the Zeuthen strategy leads them to agree upon a deal in the negotiation set. This set consists of all conflict free deals, which are individually rational and Pareto optimal, and the conflict deal, which maximizes the Nash product. The strategy was introduced in 1930 by the Danish economist Frederik Zeuthen. == Three key questions == The Zeuthen strategy answers three open questions that arise when using the monotonic concession protocol, namely: Which deal should be proposed at first? On any given round, who should concede? In case of a concession, how much should the agent concede? The answer to the first question is that any agent should start with its most preferred deal, because that deal has the highest utility for that agent. The second answer is that the agent with the smallest value of Risk(i,t) concedes, because the agent with the lowest utility for the conflict deal profits most from avoiding conflict. To the third question, the Zeuthen strategy suggests that the conceding agent should concede just enough raise its value of Risk(i,t) just above that of the other agent. This prevents the conceding agent to have to concede again in the next round. == Risk == Risk ( i , t ) = { 1 U i ( δ ( i , t ) ) = 0 U i ( δ ( i , t ) ) − U i ( δ ( j , t ) ) U i ( δ ( i , t ) ) otherwise {\displaystyle {\text{Risk}}(i,t)={\begin{cases}1&U_{i}(\delta (i,t))=0\\{\frac {U_{i}(\delta (i,t))-U_{i}(\delta (j,t))}{U_{i}(\delta (i,t))}}&{\text{otherwise}}\end{cases}}} Risk(i,t) is a measurement of agent i's willingness to risk conflict. The risk function formalizes the notion that an agent's willingness to risk conflict is the ratio of the utility that agent would lose by accepting the other agent's proposal to the utility that agent would lose by causing a conflict. Agent i is said to be using a rational negotiation strategy if at any step t + 1 that agent i sticks to his last proposal, Risk(i,t) > Risk(j,t). == Sufficient concession == If agent i makes a sufficient concession in the next step, then, assuming that agent j is using a rational negotiation strategy, if agent j does not concede in the next step, he must do so in the step after that. The set of all sufficient concessions of agent i at step t is denoted SC(i, t). == Minimal sufficient concession == δ ′ = arg ⁡ max δ ∈ S C ( A , t ) { U A ( δ ) } {\displaystyle \delta '=\arg \max _{\delta \in {SC(A,t)}}\{U_{A}(\delta )\}} is the minimal sufficient concession of agent A in step t. Agent A begins the negotiation by proposing δ ( A , 0 ) = arg ⁡ max δ ∈ N S U A ( δ ) {\displaystyle \delta (A,0)=\arg \max _{\delta \in {NS}}U_{A}(\delta )} and will make the minimal sufficient concession in step t + 1 if and only if Risk(A,t) ≤ Risk(B,t). Theorem If both agents are using Zeuthen strategies, then they will agree on δ = arg ⁡ max δ ′ ∈ N S { π ( δ ′ ) } , {\displaystyle \delta =\arg \max _{\delta '\in {NS}}\{\pi (\delta ')\},} that is, the deal which maximizes the Nash product. Proof Let δA = δ(A,t). Let δB = δ(B,t). According to the Zeuthen strategy, agent A will concede at step t {\displaystyle t} if and only if R i s k ( A , t ) ≤ R i s k ( B , t ) . {\displaystyle Risk(A,t)\leq Risk(B,t).} That is, if and only if U A ( δ A ) − U A ( δ B ) U A ( δ A ) ≤ U B ( δ B ) − U B ( δ A ) U B ( δ B ) {\displaystyle {\frac {U_{A}(\delta _{A})-U_{A}(\delta _{B})}{U_{A}(\delta _{A})}}\leq {\frac {U_{B}(\delta _{B})-U_{B}(\delta _{A})}{U_{B}(\delta _{B})}}} U B ( δ B ) ( U A ( δ A ) − U A ( δ B ) ) ≤ U A ( δ A ) ( U B ( δ B ) − U B ( δ A ) ) {\displaystyle U_{B}(\delta _{B})(U_{A}(\delta _{A})-U_{A}(\delta _{B}))\leq U_{A}(\delta _{A})(U_{B}(\delta _{B})-U_{B}(\delta _{A}))} U A ( δ A ) U B ( δ B ) − U A ( δ B ) U B ( δ B ) ≤ U A ( δ A ) U B ( δ B ) − U A ( δ A ) U B ( δ A ) {\displaystyle U_{A}(\delta _{A})U_{B}(\delta _{B})-U_{A}(\delta _{B})U_{B}(\delta _{B})\leq U_{A}(\delta _{A})U_{B}(\delta _{B})-U_{A}(\delta _{A})U_{B}(\delta _{A})} − U A ( δ B ) U B ( δ B ) ≤ − U A ( δ A ) U B ( δ A ) {\displaystyle -U_{A}(\delta _{B})U_{B}(\delta _{B})\leq -U_{A}(\delta _{A})U_{B}(\delta _{A})} U A ( δ A ) U B ( δ A ) ≤ U A ( δ B ) U B ( δ B ) {\displaystyle U_{A}(\delta _{A})U_{B}(\delta _{A})\leq U_{A}(\delta _{B})U_{B}(\delta _{B})} π ( δ A ) ≤ π ( δ B ) {\displaystyle \pi (\delta _{A})\leq \pi (\delta _{B})} Thus, Agent A will concede if and only if δ A {\displaystyle \delta _{A}} does not yield the larger product of utilities. Therefore, the Zeuthen strategy guarantees a final agreement that maximizes the Nash Product.

  Read more →