AI Face Blur

AI Face Blur — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Image formation

  The study of image formation encompasses the radiometric and geometric processes by which 2D images of 3D objects are formed. In the case of digital images, the image formation process also includes analog to digital conversion and sampling. == Imaging == The imaging process is a mapping of an object to an image plane. Each point on the image corresponds to a point on the object. An illuminated object will scatter light toward a lens and the lens will collect and focus the light to create the image. The ratio of the height of the image to the height of the object is the magnification. The spatial extent of the image surface and the focal length of the lens determines the field of view of the lens. Image formation of mirror these have a center of curvature and its focal length of the mirror is half of the center of curvature. == Illumination == An object may be illuminated by the light from an emitting source such as the sun, a light bulb or a Light Emitting Diode. The light incident on the object is reflected in a manner dependent on the surface properties of the object. For rough surfaces, the reflected light is scattered in a manner described by the Bi-directional Reflectance Distribution Function (BRDF) of the surface. The BRDF of a surface is the ratio of the exiting power per square meter per steradian (radiance) to the incident power per square meter (irradiance). The BRDF typically varies with angle and may vary with wavelength, but a specific important case is a surface that has constant BRDF. This surface type is referred to as Lambertian and the magnitude of the BRDF is R/π, where R is the reflectivity of the surface. The portion of scattered light that propagates toward the lens is collected by the entrance pupil of the imaging lens over the field of view. == Field of view and imagery == The Field of view of a lens is limited by the size of the image plane and the focal length of the lens. The relationship between a location on the image and a location on the object is y = ftan(θ), where y is the max extent of the image plane, f is the focal length of the lens and θ is the field of view. If y is the max radial size of the image then θ is the field of view of the lens. While the image created by a lens is continuous, it can be modeled as a set of discrete field points, each representing a point on the object. The quality of the image is limited by the aberrations in the lens and the diffraction created by the finite aperture stop. == Pupils and stops == The aperture stop of a lens is a mechanical aperture which limits the light collection for each field point. The entrance pupil is the image of the aperture stop created by the optical elements on the object side of the lens. The light scattered by an object is collected by the entrance pupil and focused onto the image plane via a series of refractive elements. The cone of the focused light at the image plane is set by the size of the entrance pupil and the focal length of the lens. This is often referred to as the f-stop or f-number of the lens. f/# = f/D where D is the diameter of the entrance pupil. == Pixelation and color vs. monochrome == In typical digital imaging systems, a sensor is placed at the image plane. The light is focused on to the sensor and the continuous image is pixelated. The light incident on each pixel in the sensor will be integrated within the pixel and a proportional electronic signal will be generated. The angular geometric resolution of a pixel is given by atan(p/f), where p is the pitch of the pixel. This is also called the pixel field of view. The sensor may be monochrome or color. In the case of a monochrome sensor, the light incident on each pixel is integrated and the resulting image is a grayscale like picture. For color images, a mosaic color filter is typically placed over the pixels to create a color image. An example is a Bayer filter. The signal incident on each pixel is then digitized to a bit stream. == Image quality == The quality of an image is dependent upon both geometric and physical items. Geometrically, higher density of pixels across an image will give less blocky pixelation and thus a better geometric image quality. Lens aberrations also contribute to the quality of the image. Physically, diffraction due to the aperture stop will limit the resolvable spatial frequencies as a function of f-number. In the frequency domain, Modulation Transfer Function (MTF) is a measure of the quality of the imaging system. The MTF is a measure of the visibility of a sinusoidal variation in irradiance on the image plane as a function of the frequency of the sinusoid. It includes the effects of diffraction, aberrations and pixelation. For the lens, the MTF is the autocorrelation of the pupil function, so it accounts for the finite pupil extent and the lens aberrations. The sensor MTF is the Fourier Transform of the pixel geometry. For a square pixel, MTF(ξ) = sin(πξp)/πξp where p is the pixel width and ξ is the spatial frequency. The MTF of the combination of the lens and detector is the product of the two component MTFs. == Perception == Color images can be perceived via two means. In the case of computer vision the light incident on the sensor comprises the image. In the case of visual perception, the human eye has a color dependent response to light so this must be accounted for. This is important consideration when converting to grayscale. == Image formation in eye == The principal difference between the lens of the eye and an ordinary optical lens is that the former is flexible. The radius of the curvature of the anterior surface of the lens is greater than the radius of its posterior surface. The shape of the lens is controlled by tension in the fibers of the ciliary body. To focus on distant objects, the controlling muscles cause the lens to be relatively flattened. Similarly, these muscles allow the lens to become thicker in order to focus on objects near the eye. The distance between the center of the lens and the retina (focal length) varies from approximately 17 mm to about 14 mm, as the refractive power of the lens increases from its minimum to its maximum. When the eye focuses on an object farther away than about 3 m, the lens exhibits its lowest refractive power. When the eye focuses on a close object, the lens is most strongly refractive.

  Read more →
• 

  CENDI

  CENDI (Commerce, Energy, NASA, Defense Information Managers Group) is an interagency group of senior Scientific and Technical Information (STI) managers from 14 United States federal agencies. CENDI managers cooperate by exchanging information and ideas, collaborating to address common issues, and undertaking joint initiatives. CENDI's accomplishments range from impacting federal information policy to educating a broad spectrum of stakeholders on all aspects of federal STI systems, including its value to research and the taxpayer, and to operational improvements in agency and interagency STI operations. == History == CENDI traces its roots to the Committee on Scientific and Technical Information (COSATI) of the Federal Council on Science and Technology. COSATI was established in the early 1960s to coordinate the management of the results from the U.S. government's increasing commitment to scientific research and technology development. The scientific and technical information (STI) managers of the government's major research and development (R&D) agencies worked within COSATI to standardize guidelines for cataloging and indexing technical reports. COSATI ceased formal operations in the early 1970s. To continue the cooperation begun under COSATI, managers of agency STI programs from Commerce (National Technical Information Service), Energy (Office of Scientific and Technical Information), NASA (HQ/STI Division), and Defense (Defense Technical Information Center) began meeting periodically to discuss common topics and stimulate more effective cooperation. In 1985, a Memorandum of Understanding was signed by the four charter agencies and CENDI was established. From this small core of STI managers, CENDI has grown to its current membership, which represents the major science agencies, the national libraries, and agencies involved in the dissemination and long-term management of scientific and technical information. The vision of CENDI is to facilitate cooperative enterprise where capabilities are shared and challenges are faced together so that the sum of the accomplishments is greater than each individual agency can achieve on its own amongst federal STI agencies. The abbreviation CENDI refers to the "Commerce, Energy, NASA, Defense Information Managers Group". == Membership == New members from other federal R&D information organizations may be admitted by unanimous agreement of the members. However, it is the intent of the group that membership in CENDI should remain small and focus on organizations with STI or supporting responsibilities. Each agency provides funding to CENDI. == Members == The members of CENDI are: Defense Technical Information Center (United States Department of Defense) Office of Research and Development and Office of Environmental Information (United States Environmental Protection Agency) Government Printing Office Library of Congress NASA Scientific and Technical Information Program National Agricultural Library (United States Department of Agriculture) National Archives and Records Administration National Library of Education (United States Department of Education) National Library of Medicine (United States Department of Health and Human Services) National Science Foundation National Technical Information Service (United States Department of Commerce) National Transportation Library (United States Department of Transportation) Office of Scientific and Technical Information (United States Department of Energy) USGS/Biological Resources Discipline (United States Department of the Interior) == Mission and operation == CENDI's mission is to help improve the productivity of federal science- and technology-based programs through effective scientific, technical, and related information support systems. In fulfilling its mission, CENDI agencies play an important role in addressing science- and technology-based national priorities and strengthening U.S. competitiveness. === Goals === STI Coordination and Leadership: Provide coordination and leadership for information exchange on important STI policy issues. Improvement of STI Systems: Promote the development of improved STI systems through the productive interrelationship of content and technology. STI Understanding: Promote better understanding of STI and STI management. === Principals and Alternates === CENDI is made up of senior federal STI managers and each organization appoints a Principal representative. This person is the point of contact for that organization within CENDI. Each Principal has an Alternate. The Principals and Alternates comprise the main group that meets on a regular basis, usually every other month. === Secretariat === A Tennessee-based information management company, -- Information International Associates, Inc., currently serves as the CENDI Secretariat. The Secretariat provides day-to-day operations to CENDI. The Secretariat prepares the necessary materials for the Principals' meetings, provides support for the working group and task group meetings, assists in developing papers, and maintains the CENDI files and outreach tools. === Task Groups and Working Groups === The chair(s) of a working group is appointed by the Principals and has the overall responsibility for the group's activities. The Secretariat provides support at the request of the Working Group chair(s). The Working Groups and Task Groups that are currently operating are: Copyright and Intellectual Property Working Group Distribution Markings Task Group Digital Preservation Task Group Digitization Specifications Task Group Image Metadata Task Group Science.gov (see below) STI Policy Working Group Terminology Resources Task Group === Science.gov and Worldwidescience.org === In 2001, in response to the April 2001 workshop on "Strengthening the Public Information Infrastructure for Science", and taking into consideration a request from Firstgov (now USA.gov) to develop specialized topical portals, CENDI formed an alliance to develop an interagency website for access to STI. This website, called Science.gov, is a one-stop source of STI, including both selected, authoritative government websites and deep Web databases of technical reports, journal articles, conference proceedings, and other published materials. Through the volunteer efforts of members and involving over 100 staff, content and architecture is developed for the site. The Science.gov website is hosted by the Department of Energy (DOE) Office of Scientific and Technical Information (OSTI). The site was formally launched in December 2002. As a result of the success of Science.gov, under DOE leadership and in cooperation with the International Council of Scientific and Technical Information, a worldwide coordination across national portals called WorldWideScience was launched in 2008. === Work with non-member organizations === CENDI works with several cooperating non-member organizations on a regular basis. These agencies are in academia, federal government, legal and policy analysis, international, non-governmental, and private organizations.

  Read more →
• 

  Ontology merging

  Ontology merging defines the act of bringing together two conceptually divergent ontologies or the instance data associated to two ontologies. This is similar to work in database merging (schema matching). This merging process can be performed in a number of ways, manually, semi automatically, or automatically. Manual ontology merging although ideal is extremely labour-intensive and current research attempts to find semi or entirely automated techniques to merge ontologies. These techniques are statistically driven often taking into account similarity of concepts and raw similarity of instances through textual string metrics and semantic knowledge. These techniques are similar to those used in information integration employing string metrics from open source similarity libraries.

  Read more →
• 

  Ballin' (Mustard and Roddy Ricch song)

  "Ballin'" is a song by American record producer Mustard featuring American rapper Roddy Ricch. The track was released as the third single from Mustard's third studio album, Perfect Ten, on August 20, 2019, though it was available as early as the end of June 2019. The song and its accompanying video received acclaim from music critics, with Complex magazine naming it the Best Song of 2019. It peaked at number 11 on the Billboard Hot 100, marking Mustard's highest charting song in the US. The song received a nomination for Best Rap/Sung Performance at the 2020 Grammy Awards, making it the first time Ricch has been nominated for a Grammy and Mustard's first nomination as an artist. Later in 2019, the two released another collaboration, "High Fashion". == Background == Roddy Ricch revealed in an interview that the song was composed in late 2018, but Mustard wanted to keep it for his album, Perfect Ten, which he was still working on. The song was later included on the album, released in June 2019. Ricch said he knew the song was "hard enough" the first time he heard it, while Mustard proclaimed "this is going to be the one". == Composition and lyrics == "Ballin'" has a "rags to riches" theme. In its intro, the song samples girl group 702's 1997 top ten hit "Get It Together". The song features a "smooth, bouncy beat", with Roddy Ricch rapping about his come-up and ascent in the music industry. In the first verse, Ricch salutes fellow Los Angeles rapper, the late Nipsey Hussle and his girlfriend Lauren London: "I run these racks up with my queen like London and Nip". The line simultaneously references Ricch and Hussle's collaboration "Racks in the Middle", released earlier in 2019 as Hussle's last single before his death. Billboard's Heran Mamo noted that "in typical Hussle fashion", Roddy Ricch "narrates his life's hardships before delving into his newfound treasures". == Critical reception == The song was widely acclaimed by music critics. Charles Holmes of Rolling Stone magazine called it "a song of the year contender", while Complex and Billboard both named it as a "standout track" on the album. Pitchfork magazine included "Ballin'" in its list of The Best Rap Songs of 2019 and called it "the centerpiece of Mustard's underappreciated album Perfect Ten". Complex later named it the Best Song of 2019, calling it "a feel-good anthem so infectious you'll need antibiotics just to stop running it back". == Chart performance == "Ballin'" was at the time Mustard's highest charting song in the US, peaking at number 11 on the Billboard Hot 100. It was also Roddy Ricch's highest charting song, until he surpassed it a week later, with the release of his album track "The Box", which eventually reached number 1 on the chart. It reached number one on Billboard's Rhythmic Songs chart, becoming Mustard's second number one following "Pure Water" and Ricch's first number one. The song also topped the Rap Airplay chart. == Music video == The music video for the track was teased by Mustard on his Instagram page on September 29, 2019. The music video for the track was eventually released on October 2, 2019 to critical acclaim. The video features Mustard and Roddy Ricch driving a Lamborghini Aventador in Los Angeles, where they both are from, playing poker in a casino, and going to a strip club. This is contrasted with scenes in which Mustard and Roddy Ricch as children play cards with Monopoly money and playing with miniature toy Lamborghinis together, aspiring for wealth and luxury, representing how they went from "rags to riches". The video also pays tribute to rapper Nipsey Hussle, who had been killed a few months ago. == Live performances == On December 16, 2019, Roddy Ricch performed the song live, alongside an 8-piece orchestra, at Peppermint Club in Los Angeles for Audiomack's Trap Symphony series. Along with Mustard, he performed it at The Pop Out: Ken & Friends on June 19, 2024. == Other uses == The song can be heard on "Elyse's Skit", track 10 off Roddy Ricch's debut album Please Excuse Me for Being Antisocial. In the skit, which is an actual voicenote recording, the mother of a woman named Elyse sends her daughter a voicenote, with "Ballin'" playing in the background, while the mother proceeds to say "I can't get that damn song out my head", jokingly calling it "inappropriate music". Ricch called the skit "something natural". In 2023, AI covers of the song using models based on pop culture characters and real-world celebrities gained viral popularity. == Awards and nominations == 62nd Annual Grammy Awards == Charts == == Certifications ==

  Read more →
• 

  Corel Designer

  Corel DESIGNER is a vector-based graphics program. It was originally developed by Micrografx, which was bought by Corel in 2001. The last version developed by Micrografx was 9.0 in 2001. This program was later sold as Corel DESIGNER 9. There are still a number of users who continue working with version 9.0, because newer versions of the product are based on a modified CorelDRAW rather than the original product. Corel DESIGNER is effective for the creation of engineering drawings, but also offers many functions for graphic design. Starting with version X5, Corel DESIGNER Technical Suite includes Corel Designer, CorelDRAW and Corel Photo-Paint. X6 was the last release for Windows XP. == Release history and file formats ==

  Read more →
• 

  Sedona Canada Principles

  The Sedona Canada Principles are a set of authoritative guidelines published by The Sedona Conference to aid members of the Canadian legal community involved in the identification, collection, preservation, review and production of electronically stored information (ESI). The principles were drafted by a small group of lawyers, judges and technologists called the Sedona Working Group 7 or Sedona Canada. Sedona Canada is an offshoot of The Sedona Conference which is an American "non-profit ... research and educational institute dedicated to the advanced study of law and policy in the areas of antitrust law, complex litigation, and intellectual property rights". == Background == Civil procedure in Canada is jurisdictional with each province following its own rules of civil procedure. However, each province must address the fact that due to the advancement of technology the discovery process enshrined in the rules of civil procedure can be potentially derailed due to the sheer volume of electronically stored information (ESI). When dealing with litigation matters that involve electronically stored information (ESI), the discovery process is commonly called e-discovery. The problems associated with e-discovery in Canada led to the creation of the Sedona Canada Principles. Rule 29.1.03(4) of the wikibooks:Ontario Rules of Civil Procedure specifically refers to the Sedona Canada Principles in referencing Principles re Electronic Discovery although it has been reported that this rule has been largely ignored in practice. == Summary == The Sedona Canada Principles largely refer to the processes found in the Electronic Discovery Reference Model. The principles urge proportionality due to the potentially enormous volumes of documents that may be discoverable when dealing with ESI. They also encourage good faith in the document preservation stage and regular meetings between parties to discuss the scope of the litigation. Parties are urged to be aware of the potential costs involved in producing relevant ESI but are advised that only reasonably accessible ESI need be produced. The principles stipulate that parties should not be required to search for or collect deleted material unless there is an agreement or court order related to those terms. The use of electronic tools and processes such as data sampling and web harvesting are acceptable practices. Parties are encouraged to agree early in the litigation process on production format required for the exchange of relevant documents as part of the discovery process (native files, pdf, tiff, metadata requirements etc.). Agreements or direction should be sought, if necessary, with respect to privilege or other confidential information related to production of electronic documents and data. Parties should be aware that legal precedents can be formed as a result of e-discovery practices and sanctions can be considered for a party's failure to meet their discovery obligations unless it can be demonstrated that the failure was not intentional. All parties must bear the “reasonable” costs associated with e-discovery but other arrangements can be agreed upon by the parties or by court order. == Caselaw == In Warman v. National Post Company proportionality was at issue in a case where the plaintiff was suing the defendant for libel. A motion was brought by the defendant to have the plaintiff provide a mirror image of his hard drive in an effort to prove an internet article was indeed authored by the plaintiff. Issues of proportionality and the work of the Sedona Conference and Sedona Canada Principles were factored in to the decision to grant the defendant only limited access to the hard drive. In Innovative Health Group Inc. v. Calgary Health Region the plaintiff's legal obligation to produce imaged hard drives is in question. Justice Conrad refers to the advice of Sedona Canada on proportionality and problems associated with time and expense related to the difficulties associated with electronically stored information. In York University v. Michael Markicevic Justice Brown specifically refers to the need for the parties to agree upon a formal e-discovery plan to be drafted in consultation with Sedona Canada Principles. In Friends of Lansdowne v. Ottawa Master MacLeod refers to the need for Sedona Canada principles and states “This is particularly true in the current information age when e-mail is ubiquitous and multiple copies or variants of messages may be held on various kinds of data storage devices including individual hard drives, e-mail and Blackberry servers. Even documents that ultimately exist in paper form normally begin their life on computers and negotiations frequently involve exchanges of electronic drafts. To find every scrap of paper and every electronic trace of relevant information has become a nightmarish task that threatens to render any kind of litigation extravagantly expensive.” == Criticism == Critics of the Sedona Canada Principles believe they should address system integrity and that the true history of any file preserved cannot be identified without proof of the integrity of the electronic record systems management it comes from. Other criticism is more directed to the Sedona Canada working group and complaints that it is insular and irrelevant.

  Read more →
• 

  Randomized rounding

  In computer science and operations research, randomized rounding is a widely used approach for designing and analyzing approximation algorithms. Many combinatorial optimization problems are computationally intractable to solve exactly (to optimality). For such problems, randomized rounding can be used to design fast (polynomial time) approximation algorithms—that is, algorithms that are guaranteed to return an approximately optimal solution given any input. The basic idea of randomized rounding is to convert an optimal solution of a relaxation of the problem into an approximately-optimal solution to the original problem. The resulting algorithm is usually analyzed using the probabilistic method. == Overview == The basic approach has three steps: Formulate the problem to be solved as an integer linear program (ILP). Compute an optimal fractional solution x {\displaystyle x} to the linear programming relaxation (LP) of the ILP. Round the fractional solution x {\displaystyle x} of the LP to an integer solution x ′ {\displaystyle x'} of the ILP. (Although the approach is most commonly applied with linear programs, other kinds of relaxations are sometimes used. For example, see Goemans' and Williamson's semidefinite programming-based Max-Cut approximation algorithm.) In the first step, the challenge is to choose a suitable integer linear program. Familiarity with linear programming, in particular modelling using linear programs and integer linear programs, is required. For many problems, there is a natural integer linear program that works well, such as in the Set Cover example below. (The integer linear program should have a small integrality gap; indeed randomized rounding is often used to prove bounds on integrality gaps.) In the second step, the optimal fractional solution can typically be computed in polynomial time using any standard linear programming algorithm. In the third step, the fractional solution must be converted into an integer solution (and thus a solution to the original problem). This is called rounding the fractional solution. The resulting integer solution should (provably) have cost not much larger than the cost of the fractional solution. This will ensure that the cost of the integer solution is not much larger than the cost of the optimal integer solution. The main technique used to do the third step (rounding) is to use randomization, and then to use probabilistic arguments to bound the increase in cost due to the rounding (following the probabilistic method from combinatorics). Therein, probabilistic arguments are used to show the existence of discrete structures with desired properties. In this context, one uses such arguments to show the following: Given any fractional solution x {\displaystyle x} of the LP, with positive probability the randomized rounding process produces an integer solution x ′ {\displaystyle x'} that approximates x {\displaystyle x} according to some desired criterion. Finally, to make the third step computationally efficient, one either shows that x ′ {\displaystyle x'} approximates x {\displaystyle x} with high probability (so that the step can remain randomized) or one derandomizes the rounding step, typically using the method of conditional probabilities. The latter method converts the randomized rounding process into an efficient deterministic process that is guaranteed to reach a good outcome. == Example: the set cover problem == The following example illustrates how randomized rounding can be used to design an approximation algorithm for the set cover problem. Fix any instance ⟨ c , S ⟩ {\displaystyle \langle c,{\mathcal {S}}\rangle } of set cover over a universe U {\displaystyle {\mathcal {U}}} . === Computing the fractional solution === For step 1, let IP be the standard integer linear program for set cover for this instance. For step 2, let LP be the linear programming relaxation of IP, and compute an optimal solution x ∗ {\displaystyle x^{}} to LP using any standard linear programming algorithm. This takes time polynomial in the input size. The feasible solutions to LP are the vectors x {\displaystyle x} that assign each set s ∈ S {\displaystyle s\in {\mathcal {S}}} a non-negative weight x s {\displaystyle x_{s}} , such that, for each element e ∈ U {\displaystyle e\in {\mathcal {U}}} , x ′ {\displaystyle x'} covers e {\displaystyle e} —the total weight assigned to the sets containing e {\displaystyle e} is at least 1, that is, ∑ s ∋ e x s ≥ 1. {\displaystyle \sum _{s\ni e}x_{s}\geq 1.} The optimal solution x ∗ {\displaystyle x^{}} is a feasible solution whose cost ∑ s ∈ S c ( S ) x s ∗ {\displaystyle \sum _{s\in {\mathcal {S}}}c(S)x_{s}^{}} is as small as possible. Note that any set cover C {\displaystyle {\mathcal {C}}} for S {\displaystyle {\mathcal {S}}} gives a feasible solution x {\displaystyle x} (where x s = 1 {\displaystyle x_{s}=1} for s ∈ C {\displaystyle s\in {\mathcal {C}}} , x s = 0 {\displaystyle x_{s}=0} otherwise). The cost of this C {\displaystyle {\mathcal {C}}} equals the cost of x {\displaystyle x} , that is, ∑ s ∈ C c ( s ) = ∑ s ∈ S c ( s ) x s . {\displaystyle \sum _{s\in {\mathcal {C}}}c(s)=\sum _{s\in {\mathcal {S}}}c(s)x_{s}.} In other words, the linear program LP is a relaxation of the given set-cover problem. Since x ∗ {\displaystyle x^{}} has minimum cost among feasible solutions to the LP, the cost of x ∗ {\displaystyle x^{}} is a lower bound on the cost of the optimal set cover. === Randomized rounding step === In step 3, we must convert the minimum-cost fractional set cover x ∗ {\displaystyle x^{}} into a feasible integer solution x ′ {\displaystyle x'} (corresponding to a true set cover). The rounding step should produce an x ′ {\displaystyle x'} that, with positive probability, has cost within a small factor of the cost of x ∗ {\displaystyle x^{}} .Then (since the cost of x ∗ {\displaystyle x^{}} is a lower bound on the cost of the optimal set cover), the cost of x ′ {\displaystyle x'} will be within a small factor of the optimal cost. As a starting point, consider the most natural rounding scheme: For each set s ∈ S {\displaystyle s\in {\mathcal {S}}} in turn, take x s ′ = 1 {\displaystyle x'_{s}=1} with probability min ( 1 , x s ∗ ) {\displaystyle \min(1,x_{s}^{})} , otherwise take x s ′ = 0 {\displaystyle x'_{s}=0} . With this rounding scheme, the expected cost of the chosen sets is at most ∑ s c ( s ) x s ∗ {\displaystyle \sum _{s}c(s)x_{s}^{}} , the cost of the fractional cover. This is good. Unfortunately the coverage is not good. When the variables x s ∗ {\displaystyle x_{s}^{}} are small, the probability that an element e {\displaystyle e} is not covered is about ∏ s ∋ e 1 − x s ∗ ≈ ∏ s ∋ e exp ⁡ ( − x s ∗ ) = exp ⁡ ( − ∑ s ∋ e x s ∗ ) ≈ exp ⁡ ( − 1 ) . {\displaystyle \prod _{s\ni e}1-x_{s}^{}\approx \prod _{s\ni e}\exp(-x_{s}^{})=\exp {\Big (}-\sum _{s\ni e}x_{s}^{}{\Big )}\approx \exp(-1).} So only a constant fraction of the elements will be covered in expectation. To make x ′ {\displaystyle x'} cover every element with high probability, the standard rounding scheme first scales up the rounding probabilities by an appropriate factor λ > 1 {\displaystyle \lambda >1} . Here is the standard rounding scheme: Fix a parameter λ ≥ 1 {\displaystyle \lambda \geq 1} . For each set s ∈ S {\displaystyle s\in {\mathcal {S}}} in turn, take x s ′ = 1 {\displaystyle x'_{s}=1} with probability min ( λ x s ∗ , 1 ) {\displaystyle \min(\lambda x_{s}^{},1)} , otherwise take x s ′ = 0 {\displaystyle x'_{s}=0} . Scaling the probabilities up by λ {\displaystyle \lambda } increases the expected cost by λ {\displaystyle \lambda } , but makes coverage of all elements likely. The idea is to choose λ {\displaystyle \lambda } as small as possible so that all elements are provably covered with non-zero probability. Here is a detailed analysis. ==== Lemma (approximation guarantee for rounding scheme) ==== Fix λ = ln ⁡ ( 2 | U | ) {\displaystyle \lambda =\ln(2|{\mathcal {U}}|)} . With positive probability, the rounding scheme returns a set cover x ′ {\displaystyle x'} of cost at most 2 ln ⁡ ( 2 | U | ) c ⋅ x ∗ {\displaystyle 2\ln(2|{\mathcal {U}}|)c\cdot x^{}} (and thus of cost O ( log ⁡ | U | ) {\displaystyle O(\log |{\mathcal {U}}|)} times the cost of the optimal set cover). (Note: with care the O ( log ⁡ | U | ) {\displaystyle O(\log |{\mathcal {U}}|)} can be reduced to ln ⁡ ( | U | ) + O ( log ⁡ log ⁡ | U | ) {\displaystyle \ln(|{\mathcal {U}}|)+O(\log \log |{\mathcal {U}}|)} .) ==== Proof ==== The output x ′ {\displaystyle x'} of the random rounding scheme has the desired properties as long as none of the following "bad" events occur: the cost c ⋅ x ′ {\displaystyle c\cdot x'} of x ′ {\displaystyle x'} exceeds 2 λ c ⋅ x ∗ {\displaystyle 2\lambda c\cdot x^{}} , or for some element e {\displaystyle e} , x ′ {\displaystyle x'} fails to cover e {\displaystyle e} . The expectation of each x s ′ {\displaystyle x'_{s}} is at most λ x s ∗ {\displaystyle \lambda x_{s

  Read more →
• 

  Car–Parrinello molecular dynamics

  Car–Parrinello molecular dynamics (CPMD) refers to either a method used in molecular dynamics (also known as the Car–Parrinello method) or the computational chemistry software package used to implement this method. The CPMD method is one of the major methods for calculating ab initio molecular dynamics (ab initio MD or AIMD). Ab initio molecular dynamics (AIMD) is a computational method that uses first principles through quantum mechanics to simulate the motion of atoms in a system. It is a type of molecular dynamics (MD) simulation that does not rely on empirical potentials or force fields to describe the interactions between atoms, but rather calculates these interactions entirely from the electronic structure of the system using quantum mechanics. In an ab initio MD simulation, the total energy of the system is calculated at each time step using density functional theory (DFT), Hartree-Fock (HF), or other electronic structure calculation methods. The forces acting on each atom are then determined from the gradient of the energy with respect to the atomic coordinates, and the equations of motion are solved to predict the trajectory of the atoms. AIMD permits chemical bond breaking and forming events to occur and accounts for electronic polarization effect. Therefore, Ab initio MD simulations can be used to study a wide range of phenomena, including the structural, thermodynamic, and dynamic properties of materials and chemical reactions. They are particularly useful for systems that are not well described by empirical potentials or force fields, such as systems with strong electronic correlation or systems with many degrees of freedom. However, ab initio MD simulations are computationally demanding and require significant computational resources. The CPMD method is related to the more common Born–Oppenheimer molecular dynamics (BOMD) method in that the quantum mechanical effect of the electrons is included in the calculation of energy and forces for the classical motion of the nuclei. CPMD and BOMD are different types of AIMD. However, whereas BOMD treats the electronic structure problem within the time-independent Schrödinger equation, CPMD explicitly includes the electrons as active degrees of freedom, via (fictitious) dynamical variables. The software is a parallelized plane wave / pseudopotential implementation of density functional theory, particularly designed for ab initio molecular dynamics. == Car–Parrinello method == The Car–Parrinello method is a type of molecular dynamics, usually employing periodic boundary conditions, planewave basis sets, and density functional theory, proposed by Roberto Car and Michele Parrinello in 1985 while working at SISSA, who were subsequently awarded the Dirac Medal by ICTP in 2009. In contrast to Born–Oppenheimer molecular dynamics wherein the nuclear (ions) degree of freedom are propagated using ionic forces which are calculated at each iteration by approximately solving the electronic problem with conventional matrix diagonalization methods, the Car–Parrinello method explicitly introduces the electronic degrees of freedom as (fictitious) dynamical variables, writing an extended Lagrangian for the system which leads to a system of coupled equations of motion for both ions and electrons. In this way, an explicit electronic minimization at each time step, as done in Born–Oppenheimer MD, is not needed: after an initial standard electronic minimization, the fictitious dynamics of the electrons keeps them on the electronic ground state corresponding to each new ionic configuration visited along the dynamics, thus yielding accurate ionic forces. In order to maintain this adiabaticity condition, it is necessary that the fictitious mass of the electrons is chosen small enough to avoid a significant energy transfer from the ionic to the electronic degrees of freedom. This small fictitious mass in turn requires that the equations of motion are integrated using a smaller time step than the one (1–10 fs) commonly used in Born–Oppenheimer molecular dynamics. Currently, the CPMD method can be applied to systems that consist of a few tens or hundreds of atoms and access timescales on the order of tens of picoseconds. == General approach == In CPMD the core electrons are usually described by a pseudopotential and the wavefunction of the valence electrons are approximated by a plane wave basis set. The ground state electronic density (for fixed nuclei) is calculated self-consistently, usually using the density functional theory method. Kohn-Sham equations are often used to calculate the electronic structure, where electronic orbitals are expanded in a plane-wave basis set. Then, using that density, forces on the nuclei can be computed, to update the trajectories (using, e.g. the Verlet integration algorithm). In addition, however, the coefficients used to obtain the electronic orbital functions can be treated as a set of extra spatial dimensions, and trajectories for the orbitals can be calculated in this context. == Fictitious dynamics == CPMD is an approximation of the Born–Oppenheimer MD (BOMD) method. In BOMD, the electrons' wave function must be minimized via matrix diagonalization at every step in the trajectory. CPMD uses fictitious dynamics to keep the electrons close to the ground state, preventing the need for a costly self-consistent iterative minimization at each time step. The fictitious dynamics relies on the use of a fictitious electron mass (usually in the range of 400 – 800 a.u.) to ensure that there is very little energy transfer from nuclei to electrons, i.e. to ensure adiabaticity. Any increase in the fictitious electron mass resulting in energy transfer would cause the system to leave the ground-state BOMD surface. === Lagrangian === L = 1 2 ( ∑ I n u c l e i M I R ˙ I 2 + μ ∑ i o r b i t a l s ∫ d r | ψ ˙ i ( r , t ) | 2 ) − E [ { ψ i } , { R I } ] + ∑ i j Λ i j ( ∫ d r ψ i ψ j − δ i j ) , {\displaystyle {\mathcal {L}}={\frac {1}{2}}\left(\sum _{I}^{\mathrm {nuclei} }\ M_{I}{\dot {\mathbf {R} }}_{I}^{2}+\mu \sum _{i}^{\mathrm {orbitals} }\int d\mathbf {r} \ |{\dot {\psi }}_{i}(\mathbf {r} ,t)|^{2}\right)-E\left[\{\psi _{i}\},\{\mathbf {R} _{I}\}\right]+\sum _{ij}\Lambda _{ij}\left(\int d\mathbf {r} \ \psi _{i}\psi _{j}-\delta _{ij}\right),} where μ {\displaystyle \mu } is the fictitious mass parameter; E[{ψi},{RI}] is the Kohn–Sham energy density functional, which outputs energy values when given Kohn–Sham orbitals and nuclear positions. === Orthogonality constraint === ∫ d r ψ i ∗ ( r , t ) ψ j ( r , t ) = δ i j , {\displaystyle \int d\mathbf {r} \ \psi _{i}^{}(\mathbf {r} ,t)\psi _{j}(\mathbf {r} ,t)=\delta _{ij},} where δij is the Kronecker delta. === Equations of motion === The equations of motion are obtained by finding the stationary point of the Lagrangian under variations of ψi and RI, with the orthogonality constraint. M I R ¨ I = − ∇ I E [ { ψ i } , { R I } ] {\displaystyle M_{I}{\ddot {\mathbf {R} }}_{I}=-\nabla _{I}\,E\left[\{\psi _{i}\},\{\mathbf {R} _{I}\}\right]} μ ψ ¨ i ( r , t ) = − δ E δ ψ i ∗ ( r , t ) + ∑ j Λ i j ψ j ( r , t ) , {\displaystyle \mu {\ddot {\psi }}_{i}(\mathbf {r} ,t)=-{\frac {\delta E}{\delta \psi _{i}^{}(\mathbf {r} ,t)}}+\sum _{j}\Lambda _{ij}\psi _{j}(\mathbf {r} ,t),} where Λij is a Lagrangian multiplier matrix to comply with the orthonormality constraint. === Born–Oppenheimer limit === In the formal limit where μ → 0, the equations of motion approach Born–Oppenheimer molecular dynamics. == Software packages == There are a number of software packages available for performing AIMD simulations. Some of the most widely used packages include: CP2K: an open-source software package for AIMD. Quantum Espresso: an open-source package for performing DFT calculations. It includes a module for AIMD. VASP: a commercial software package for performing DFT calculations. It includes a module for AIMD. Gaussian: a commercial software package that can perform AIMD. NWChem: an open-source software package for AIMD. LAMMPS: an open-source software package for performing classical and ab initio MD simulations. SIESTA: an open-source software package for AIMD. ORCA: a general-purpose quantum chemistry package. == Applications == Studying the behavior of water across different environments, such as near a hydrophobic graphene sheet. Investigating the structure and dynamics of liquid water at ambient temperature. Solving the heat transfer problems (heat conduction and thermal radiation), such as in Si/Ge superlattices. Probing the proton transfer along hydrogen-bonds in different environments, such as in 1D water chains inside carbon nanotubes. Evaluating the critical point of crystals, composites, and solid-state materials, such as aluminum. Predicting and modelling different phases and phase transitions, such as in the amorphous phase of the phase-change memory material GeSbTe. Studying the combustion of combustibles, such as lignite-water systems. Measuring th

  Read more →
• 

  Rapid prototyping

  Rapid prototyping is a group of techniques used to quickly fabricate a scale model of a physical part or assembly using three-dimensional computer aided design (CAD) data. Construction of the part or assembly is usually done using 3D printing or "additive layer manufacturing" technology. The first methods for rapid prototyping became available in mid 1987 and were used to produce models and prototype parts. Today, they are used for a wide range of applications and are used to manufacture production-quality parts in relatively small numbers if desired without the typical unfavorable short-run economics. This economy has encouraged online service bureaus. Historical surveys of RP technology start with discussions of simulacra production techniques used by 19th-century sculptors. Some modern sculptors use the progeny technology to produce exhibitions and various objects. The ability to reproduce designs from a dataset has given rise to issues of rights, as it is now possible to interpolate volumetric data from 2D images. As with CNC subtractive methods, the computer-aided-design – computer-aided manufacturing CAD -CAM workflow in the traditional rapid prototyping process starts with the creation of geometric data, either as a 3D solid using a CAD workstation, or 2D slices using a scanning device. For rapid prototyping this data must represent a valid geometric model; namely, one whose boundary surfaces enclose a finite volume, contain no holes exposing the interior, and do not fold back on themselves. In other words, the object must have an "inside". The model is valid if for each point in 3D space the computer can determine uniquely whether that point lies inside, on, or outside the boundary surface of the model. CAD post-processors will approximate the application vendors' internal CAD geometric forms (e.g., B-splines) with a simplified mathematical form, which in turn is expressed in a specified data format which is a common feature in additive manufacturing: STL file format, a de facto standard for transferring solid geometric models to SFF machines. To obtain the necessary motion control trajectories to drive the actual SFF, rapid prototyping, 3D printing or additive manufacturing mechanism, the prepared geometric model is typically sliced into layers, and the slices are scanned into lines (producing a "2D drawing" used to generate trajectory as in CNC's toolpath), mimicking in reverse the layer-to-layer physical building process. == Application areas == Rapid prototyping is also commonly applied in software engineering to try out new business models and application architectures such as Aerospace, Automotive, Financial Services, Product development, and Healthcare. Aerospace design and industrial teams rely on prototyping in order to create new AM methodologies in the industry. Using SLA they can quickly make multiple versions of their projects in a few days and begin testing quicker. Rapid Prototyping allows designers/developers to provide an accurate idea of how the finished product will turn out before putting too much time and money into the prototype. 3D printing being used for Rapid Prototyping allows for Industrial 3D printing to take place. With this, you could have large-scale moulds to spare parts being pumped out quickly within a short period of time. == Types of Rapid Prototyping == Stereolithography (SLA) → a laser-cured photopolymer for materials such as thermoplastic-like photopolymers. Selective Laser Sintering (SLS) → a laser-sintered powder for materials such as Nylon or TPU. Direct Metal Laser Sintering (DMLS) → laser-sintered metal powder for materials like stainless steel, titanium, chrome, and aluminum. Fused Deposition Modeling (FDM) → fused extrusions of filaments like ABS, PC, and PPCU. Multi Jet Fusion (MJF) → it is an inkjet array selective fusing across bed of nylon powder for Black Nylon 12. PolyJet (PJET) → it is a uv-cured jetted photopolymer to work with acrylic-based and elastomeric photopolymers. Computer Numerical Controlled Machine (CNC) → it is used for manipulating engineering-grade thermoplastics and metals. Injection Molding (IM) → the injection is done using aluminum molds and it is used for thermoplastics, metals and liquid silicone rubber. Vacuum Casting→ is a manufacturing process used to create high-quality prototypes and small batches of parts. == History == In the 1970s, Joseph Henry Condon and others at Bell Labs developed the Unix Circuit Design System (UCDS), automating the laborious and error-prone task of manually converting drawings to fabricate circuit boards for the purposes of research and development. By the 1980s, U.S. policy makers and industrial managers were forced to take note that America's dominance in the field of machine tool manufacturing evaporated, in what was named the machine tool crisis. Numerous projects sought to counter these trends in the traditional CNC CAM area, which had begun in the US. Later when Rapid Prototyping Systems moved out of labs to be commercialized, it was recognized that developments were already international and U.S. rapid prototyping companies would not have the luxury of letting a lead slip away. The National Science Foundation was an umbrella for the National Aeronautics and Space Administration (NASA), the US Department of Energy, the US Department of Commerce NIST, the US Department of Defense, Defense Advanced Research Projects Agency (DARPA), and the Office of Naval Research coordinated studies to inform strategic planners in their deliberations. One such report was the 1997 Rapid Prototyping in Europe and Japan Panel Report in which Joseph J. Beaman founder of DTM Corporation [DTM RapidTool pictured] provides a historical perspective: The roots of rapid prototyping technology can be traced to practices in topography and photosculpture. Within TOPOGRAPHY Blanther (1892) suggested a layered method for making a mold for raised relief paper topographical maps .The process involved cutting the contour lines on a series of plates which were then stacked. Matsubara (1974) of Mitsubishi proposed a topographical process with a photo-hardening photopolymer resin to form thin layers stacked to make a casting mold. PHOTOSCULPTURE was a 19th-century technique to create exact three-dimensional replicas of objects. Most famously Francois Willeme (1860) placed 24 cameras in a circular array and simultaneously photographed an object. The silhouette of each photograph was then used to carve a replica. Morioka (1935, 1944) developed a hybrid photo sculpture and topographic process using structured light to photographically create contour lines of an object. The lines could then be developed into sheets and cut and stacked, or projected onto stock material for carving. The Munz (1956) Process reproduced a three-dimensional image of an object by selectively exposing, layer by layer, a photo emulsion on a lowering piston. After fixing, a solid transparent cylinder contains an image of the object. "The Origins of Rapid Prototyping - RP stems from the ever-growing CAD industry, more specifically, the solid modeling side of CAD. Before solid modeling was introduced in the late 1980's, three-dimensional models were created with wire frames and surfaces. But not until the development of true solid modeling could innovative processes such as RP be developed. Charles Hull, who helped found 3D Systems in 1986, developed the first RP process. This process, called stereolithography, builds objects by curing thin consecutive layers of certain ultraviolet light-sensitive liquid resins with a low-power laser. With the introduction of RP, CAD solid models could suddenly come to life". The technologies referred to as Solid Freeform Fabrication are what we recognize today as rapid prototyping, 3D printing or additive manufacturing: Swainson (1977), Schwerzel (1984) worked on polymerization of a photosensitive polymer at the intersection of two computer controlled laser beams. Ciraud (1972) considered magnetostatic or electrostatic deposition with electron beam, laser or plasma for sintered surface cladding. These were all proposed but it is unknown if working machines were built. Hideo Kodama of Nagoya Municipal Industrial Research Institute was the first to publish an account of a solid model fabricated using a photopolymer rapid prototyping system (1981). The first 3D rapid prototyping system relying on Fused Deposition Modeling (FDM) was made in April 1992 by Stratasys but the patent did not issue until June 9, 1992. Sanders Prototype, Inc introduced the first desktop inkjet 3D Printer (3DP) using an invention from August 4, 1992 (Helinski), Modelmaker 6Pro in late 1993 and then the larger industrial 3D printer, Modelmaker 2, in 1997. Z-Corp using the MIT 3DP powder binding for Direct Shell Casting (DSP) invented 1993 was introduced to the market in 1995. Even at that early date the technology was seen as having a place in manufacturing practice. A low resol

  Read more →
• 

  Outline of artificial intelligence

  The following outline is provided as an overview of and topical guide to artificial intelligence: Artificial intelligence (AI) is intelligence exhibited by machines or software. It is also the name of the scientific field which studies how to create computers and computer software that are capable of intelligent behavior. == AI terminology == Glossary of artificial intelligence == Goals and applications == === General intelligence === Artificial general intelligence AI-complete === Reasoning and problem solving === Automated reasoning Mathematics Automated theorem prover Computer-assisted proof – Computer algebra General Problem Solver Expert system – Decision support system – Clinical decision support system – === Knowledge representation === Knowledge representation Knowledge management Cyc === Planning === Automated planning and scheduling Strategic planning Sussman anomaly – === Learning === Machine learning – Constrained Conditional Models – Deep learning – Neural modeling fields – Supervised learning – Weak supervision (semi-supervised learning) – Unsupervised learning – === Natural language processing === Natural language processing (outline) – Chatterbots – Language identification – Large language model – Retrieval-augmented generation – Natural language user interface – Natural language understanding – Machine translation – Statistical semantics – Question answering – Semantic translation – Concept mining – Data mining – Text mining – Process mining – E-mail spam filtering – Information extraction – Named-entity extraction – Coreference resolution – Named-entity recognition – Relationship extraction – Terminology extraction – === Perception === Machine perception Pattern recognition – Computer Audition – Speech recognition – Speaker recognition – Computer vision (outline) – Image processing Intelligent word recognition – Object recognition – Optical mark recognition – Handwriting recognition – Optical character recognition – Automatic number plate recognition – Information extraction – Image retrieval – Automatic image annotation – Facial recognition systems – Silent speech interface – Activity recognition – Percept (artificial intelligence) === Robotics === Robotics – Behavior-based robotics – Cognitive – Cybernetics – Developmental robotics – Evolutionary robotics – === Control === Intelligent control Self-management (computer science) – Autonomic Computing – Autonomic Networking – === Social intelligence === Affective computing Kismet === Game playing === Game artificial intelligence – Computer game bot – computer replacement for human players. Video game AI – Computer chess – Computer Go – General game playing – General video game playing – === Creativity, art and entertainment === Artificial creativity Artificial life Artificial intelligence art AI anthropomorphism AI agent AI web browser AI boom AI slop Creative computing Generative artificial intelligence Generative pre trained transformer Uncanny valley Music and artificial intelligence Computational humor Chatbot === Integrated AI systems === AIBO – Sony's robot dog. It integrates vision, hearing and motorskills. Asimo (2000 to present) – humanoid robot developed by Honda, capable of walking, running, negotiating through pedestrian traffic, climbing and descending stairs, recognizing speech commands and the faces of specific individuals, among a growing set of capabilities. MIRAGE – A.I. embodied humanoid in an augmented reality environment. Cog – M.I.T. humanoid robot project under the direction of Rodney Brooks. QRIO – Sony's version of a humanoid robot. TOPIO, TOSY's humanoid robot that can play ping-pong with humans. Watson (2011) – computer developed by IBM that played and won the game show Jeopardy! It is now being used to guide nurses in medical procedures. Purpose: Open domain question answering Technologies employed: Natural language processing Information retrieval Knowledge representation Automated reasoning Machine learning Project Debater (2018) – artificially intelligent computer system, designed to make coherent arguments, developed at IBM's lab in Haifa, Israel. === Intelligent personal assistants === Intelligent personal assistant – Amazon Alexa – Assistant – Braina – Cortana – Google Assistant – Google Now – Mycroft – Siri – Viv – === Other applications === Artificial life – simulation of natural life through the means of computers, robotics, or biochemistry. Automatic target recognition – Diagnosis (artificial intelligence) – Speech generating device – Vehicle infrastructure integration – Virtual Intelligence – == History == History of artificial intelligence Progress in artificial intelligence Timeline of artificial intelligence AI effect – as soon as AI successfully solves a problem, the problem is no longer considered by the public to be a part of AI. This phenomenon has occurred in relation to every AI application produced, so far, throughout the history of development of AI. AI winter – a period of disappointment and funding reductions occurring after a wave of high expectations and funding in AI. Such funding cuts occurred in the 1970s, for instance. Moore's law === History by period === 2017 in artificial intelligence 2018 in artificial intelligence 2019 in artificial intelligence 2020 in artificial intelligence 2021 in artificial intelligence 2022 in artificial intelligence 2023 in artificial intelligence 2024 in artificial intelligence 2025 in artificial intelligence 2026 in artificial intelligence 2027 in artificial intelligence 2028 in artificial intelligence 2029 in artificial intelligence === History by subject === History of logic (formal reasoning is an important precursor of AI) History of machine learning (timeline) History of machine translation (timeline) History of natural language processing History of optical character recognition (timeline) == AI algorithms and techniques == === Search === Discrete search algorithms Uninformed search Brute force search – Problem-solving technique and algorithmic paradigmPages displaying short descriptions of redirect targets Search tree – Data structure in tree form sorted for fast lookup Breadth-first search – Algorithm to search the nodes of a graph Depth-first search – Algorithm to search the nodes of a graph State space search – Class of search algorithmsPages displaying short descriptions of redirect targets Informed search Best-first search – Graph exploring search algorithm A search algorithm – Algorithm used for pathfinding and graph traversal Heuristics – Problem-solving methodPages displaying short descriptions of redirect targets Pruning (algorithm) – Data compression techniquePages displaying short descriptions of redirect targets Adversarial search Minmax algorithm – Decision rule used for minimizing the possible loss for a worst-case scenarioPages displaying short descriptions of redirect targets Logic as search Production system (computer science) – Computer program used to provide artificial intelligence Rule based system – Type of computer systemPages displaying short descriptions of redirect targets Production rule – Computer program used to provide artificial intelligence Inference rule – Method of deriving conclusionsPages displaying short descriptions of redirect targets Horn clause – Type of logical formula Forward chaining – Inference engine in an expert system Backward chaining – Method of forming inferences Planning as search State space search – Class of search algorithmsPages displaying short descriptions of redirect targets Means–ends analysis – Problem solving technique === Optimization search === Optimization (mathematics) algorithms Hill climbing – Optimization algorithm Simulated annealing – Probabilistic optimization technique and metaheuristic Beam search – Heuristic search algorithm Random optimization – Optimization technique in mathematics Evolutionary computation Genetic algorithms – Competitive algorithm for searching a problem spacePages displaying short descriptions of redirect targets Gene expression programming – Evolutionary algorithm Genetic programming – Evolving computer programs with techniques analogous to natural genetic processes Differential evolution – Method of mathematical optimization Society based learning algorithms. Swarm intelligence – Collective behavior of decentralized, self-organized systems Particle swarm optimization – Iterative simulation method Ant colony optimization – Optimization algorithmPages displaying short descriptions of redirect targets Metaheuristic – Optimization technique === Logic === Logic and automated reasoning Programming using logic Logic programming – Programming paradigm based on formal logic See "Logic as search" above. Forms of Logic Propositional logic First-order logic First-order logic with equality Constraint satisfaction – Process in artificial intelligence and operations research Fuzzy logic Fuzzy set theory – Sets whose elements have degrees of membershipPages displaying short descriptions

  Read more →
• 

  List of algorithm general topics

  This is a list of algorithm general topics. Analysis of algorithms Ant colony algorithm Approximation algorithm Best and worst cases Big O notation Combinatorial search Competitive analysis Computability theory Computational complexity theory Embarrassingly parallel problem Emergent algorithm Evolutionary algorithm Fast Fourier transform Genetic algorithm Graph exploration algorithm Heuristic Hill climbing Implementation Las Vegas algorithm Lock-free and wait-free algorithms Monte Carlo algorithm Numerical analysis Online algorithm Polynomial time approximation scheme Problem size Pseudorandom number generator Quantum algorithm Random-restart hill climbing Randomized algorithm Running time Sorting algorithm Search algorithm Stable algorithm (disambiguation) Super-recursive algorithm Tree search algorithm

  Read more →
• 

  Unrestricted algorithm

  An unrestricted algorithm is an algorithm for the computation of a mathematical function that puts no restrictions on the range of the argument or on the precision that may be demanded in the result. The idea of such an algorithm was put forward by C. W. Clenshaw and F. W. J. Olver in a paper published in 1980. In the problem of developing algorithms for computing, as regards the values of a real-valued function of a real variable (e.g., g[x] in "restricted" algorithms), the error that can be tolerated in the result is specified in advance. An interval on the real line would also be specified for values when the values of a function are to be evaluated. Different algorithms may have to be applied for evaluating functions outside the interval. An unrestricted algorithm envisages a situation in which a user may stipulate the value of x and also the precision required in g(x) quite arbitrarily. The algorithm should then produce an acceptable result without failure.

  Read more →
• 

  Embedding (machine learning)

  In machine learning, embedding is a representation learning technique that maps complex, high-dimensional data into a lower-dimensional vector space of numerical vectors. == Technique == It also denotes the resulting representation, where meaningful patterns or relationships are preserved. As a technique, it learns these vectors from data like words, images, or user interactions, differing from manually designed methods such as one-hot encoding. This process reduces complexity and captures key features without needing prior knowledge of the domain. == Similarity == In natural language processing, words or concepts may be represented as feature vectors, where similar concepts are mapped to nearby vectors. The resulting embeddings vary by type, including word embeddings for text (e.g., Word2Vec), image embeddings for visual data, and knowledge graph embeddings for knowledge graphs, each tailored to tasks like NLP, computer vision, or recommendation systems. This dual role enhances model efficiency and accuracy by automating feature extraction and revealing latent similarities across diverse applications. To measure the distance between two embeddings, a similarity measure can be used to find the overall similarity of the concepts represented by the embeddings. If the vectors are normalized to have a magnitude of 1, then the similarity measures are proportional to cos ⁡ ( θ a b ) {\displaystyle \cos \left(\theta _{ab}\right)} . The cosine similarity disregards the magnitude of the vector when determining similarity, so it is less biased towards training data that appears very frequently. The dot product includes the magnitude inherently, so it will tend to value more popular data. Generally, for high-dimensional vector spaces, vectors tend to converge in distance, so Euclidean distance becomes less reliable for large embedding vectors.

  Read more →
• 

  List of library and information science journals

  This list covers the journals, magazines, periodicals already published and continuing in the discipline of library and information science (LIS). It doesn't include ceased titles or predatory journals. Titles listed were taken from various scholarly sources, UGC Care and Wikipedia articles. == LIS journal prestige as assessed by LIS faculty == In a 2013 article by Laura Manzari, 232 LIS faculty members from ALA-accredited information science programs ranked the most prestigious journals in library and information science. The following journals were ranked in the top ten most prestigious: Journal of the Association for Information Science and Technology The Library Quarterly Annual Review of Information Science and Technology Journal of Documentation Library Trends Library and Information Science Research Information Processing and Management Journal of Education for Library and Information Science Education College & Research Libraries First Monday (journal) A subsequent study by Safón and Docampo in 2023 identified impactful LIS journals based on their influence on papers published in other LIS publications. Journals listed in the top ten in this study that did not appear in Manzari's list include: Scientometrics International Journal of Information Management Quantitative Science Studies MIS Quarterly Information and Management Journal of the Association for Information Systems Journal of Informetrics The Journal of Academic Librarianship == India == Annals of Library and Information Studies. (Pub: CSIR-NIScPR ), Formerly: Annals of Library Science. ISSN 0003-4835. (1954-) OPEN ACCESS Collnet Journal of Scientrometrics and Information Management (Pub: Taru Publications, Online through Taylor and Francis) ISSN: 0973-7766 Online 2168-930X. College Libraries (Pub: West Bengal College Librarians’ Association (WBCLA) ISSN 0972-1975, Quarterly DESIDOC Journal of Library and Information Technology (DJLIT) (Formerly: DESIDOC Bulletin 0970-8154, DESIDOC Bulletin of Information Technology. 0971-4383/0974-0643) (Pub: Defence Scientific Information & Documentation Centre) ISSN: 0974-0643, ISSN: 0976-4658 (O), Bi-monthly, OPEN ACCESS. Grandhalaya Sarvaswam (Bilingual: Telugu & English) [Pub: Andhra Pradesh Library Association, Vijayawada, Andhra Pradesh, India] (1915–) Gyankosh: Journal of Library and Information Management. (Pub: Integrated Academy Of Management And Technology. Through: Indian Journals.Com). ISSN: 2229-4023 (P), 2249-3182. Half yearly. IASLIC Bulletin (Pub: Indian Association of Special Libraries and Information Centres) ISSN: 0018-8411. Quarterly (1956-) IASLIC Newsletter (Pub: Indian Association of Special Libraries and Information Centres. (Pub: Indian Association of Special Libraries and Information Centres) ISSN 0018-845X. Monthly. (1966-) INFLIBNET Newsletter. (Pub: INFLIBNET). Monthly. Informatics Studies. (Pub: Centre For Informatics Research And Development). Quarterly. Through: Indian journals.com. ISSN: 2583-8994 (Online), 2320-530X (Print) ISST Journal of Advances in Librarianship (Pub:Intellectuals Society for Socio-Techno Welfare) ISSN: 0976-9021. Semiannual. Journal of Advanced Research in Library and Information Science. (JALIS Publishers). 4/year. ISSN 2277-2219. Journal of Indian Library Association (Pub: Indian Library Association). ISSN (P) 2277-5145 O) 2456-513X. Quarterly. (1965-). Journal of Scientometric Research. (Pub: Phcog.Net). ISSN (P) 2321-6654, (O) 2320-0057]; Frequency : Triannual. KELPRO Bulletin (Pub: Kerala Library Professionals' Organisation - KELPRO). ISSN 0975-4911( Print),2582-497X (O).(1993-) KIIT Journal of Library and Information Management (Pub: KIIT University, online through Indian Journals.com) Half yearly. ISSN: 2348-0858. Library Herald. (Pub: Delhi Library Association - DLA). Quarterly. ISSN: 0024-2292. Library Progress (International). (Pub: Bpas Publications, Through: ). Half yearly. ISSN: 0970-1052. (O) ISSN: 2320-317X. (1981-) Pearl: A Journal of Library and Information Science. (Pub: University Library Teacher's Association of Andhra Pradesh, Hyderabad), ISSN: 0973-7081 (print), 0975-6922 (online). Quarterly. RBU Journal of Library and Information Science. (Pub: Rabindra Bharati University).ISSN: 0972-2750. Annual. SALIS Journal of Information Management and Technology - SJIMT. (Pub: Society for the Advancement of Library and Information Science). Half-yearly. ISSN 0975-4105. SALIS Journal of Library and Information Science - SJLIS: an International Journal. (Pub: Society for the Advancement of Library and Information Science). Half-yearly. ISSN: 0973-3108. SRELS journal of Information and Knowledge (Formerly: Library Science with a Slant to Documentation, ISSN: 0024-2543; Library Science with a Slant to Documentation and Information Studies ISSN: 0970-6089; SRELS Journal of Information Management ISSN: ). Quarterly. ISSN: 2583-9314 (O) World Digital Libraries. Half yearly. ISSN: 0974-567X (P), 0975-7597 (O). == Other countries == African Journal of Library, Archives and Information Science Art Libraries Journal (Cambridge University Press) Bibliothèque de l'École des Chartes Canadian Journal of Information and Library Science Cataloging & Classification Quarterly Communications in Information Literacy Cataloging & Classification Quarterly Catholic Library Association Children and Libraries Code4Lib Journal College & Research Libraries Communications in Information Literacy Disability in Library and Information Studies Electronic Journal of Academic and Special Librarianship El Profesional de la Información (es) (EPI) (Formerly Information World en Español) Evidence Based Library and Information Practice (journal) Faslname-ye Ketab Florida Libraries. Florida Library Association. Georgia Library Quarterly. Quarterly. (Pub: Georgia Library Association). Hipertext.net IFLA Journal In the Library with the Lead Pipe Information & Culture International Journal of Information Retrieval Research (IJIRR) Information Processing and Management Information Research Information Sciences (journal) Information Visualization (journal) Information, Communication & Society International Journal of Geographical Information Science Information Research: An International Electronic Journal (IR) Internet Research (journal) Issues in Science and Technology Librarianship Italian Journal of Library and Information Studies (JLIS.it) JLIS.it Journal of Documentation (JDoc) Journal of Information Ethics Journal of Information Science (JIS) Journal of Information Technology Journal of Informetrics Journal of Librarianship and Information Science Journal of Library & Information Studies - JLIS. (Pub: National Taiwan University) Journal of Library Administration Journal of Religious & Theological Information Journal of the Association for Information Science and Technology (Formerly Journal of the American Society for Information Science and Technology) (JASIST) Journal of the Medical Library Association Journal of the Canadian Health Libraries Association (Pub: Canadian Health Libraries Association). Knowledge Organization (journal) Knowledge Quest. (Pub: American Association of School Librarians) Library and Information Science Abstracts Library Literature and Information Science Library, Information Science & Technology Abstracts Library Literature and Information Science Retrospective Library Review (journal) Library Trends Libri (journal) Malaysian Journal of Library and Information Science MLA Forum New Century Library New Review of Children's Literature and Librarianship Notes (journal) Portal – Libraries and the Academy Progressive Librarian, Progressive Librarians Guild Reference and User Services Quarterly Reference Services Review Research Evaluation (journal) Scientometrics (journal) Serials Review South African Journal of Libraries and Information Science The Charleston Advisor The Christian Librarian, from the Association of Christian Librarians The Journal of Academic Librarianship The Library Quarterly (LQ) The Public-Access Computer Systems Review TripleC Webolog

  Read more →
• 

  Knowledge organization

  Knowledge organization (KO), organization of knowledge, organization of information, or information organization is an intellectual discipline concerned with activities such as document description, indexing, and classification that serve to provide systems of representation and order for knowledge and information objects. According to The Organization of Information by Joudrey and Taylor, information organization: examines the activities carried out and tools used by people who work in places that accumulate information resources (e.g., books, maps, documents, datasets, images) for the use of humankind, both immediately and for posterity. It discusses the processes that are in place to make resources findable, whether someone is searching for a single known item or is browsing through hundreds of resources just hoping to discover something useful. Information organization supports a myriad of information-seeking scenarios. Issues related to knowledge sharing can be said to have been an important part of knowledge management for a long time. Knowledge sharing has received a lot of attention in research and business practice both within and outside organizations and its different levels. Sharing knowledge is not only about giving it to others, but it also includes searching, locating, and absorbing knowledge. Unawareness of the employees' work and duties tends to provoke the repetition of mistakes, the waste of resources, and duplication of the same projects. Motivating co-workers to share their knowledge is called knowledge enabling. It leads to trust among individuals and encourages a more open and proactive relationship that grants the exchange of information easily. Knowledge sharing is part of the three-phase knowledge management process which is a continuous process model. The three parts are knowledge creation, knowledge implementation, and knowledge sharing. The process is continuous, which is why the parts cannot be fully separated. Knowledge creation is the consequence of individuals' minds, interactions, and activities. Developing new ideas and arrangements alludes to the process of knowledge creation. Using the knowledge which is present at the company in the most effective manner stands for the implementation of knowledge. Knowledge sharing, the most essential part of the process for our topic, takes place when two or more people benefit by learning from each other. Traditional human-based approaches performed by librarians, archivists, and subject specialists are increasingly challenged by computational (big data) algorithmic techniques. KO as a field of study is concerned with the nature and quality of such knowledge-organizing processes (KOP) (such as taxonomy and ontology) as well as the resulting knowledge organizing systems (KOS). == Theoretical approaches == === Traditional approaches === Among the major figures in the history of KO are Melvil Dewey (1851–1931) and Henry Bliss (1870–1955). Dewey's goal was an efficient way to manage library collections; not an optimal system to support users of libraries. His system was meant to be used in many libraries as a standardized way to manage collections. The first version of this system was created in 1876. An important characteristic in Henry Bliss' (and many contemporary thinkers of KO) was that the sciences tend to reflect the order of Nature and that library classification should reflect the order of knowledge as uncovered by science: The implication is that librarians, in order to classify books, should know about scientific developments. This should also be reflected in their education: Again from the standpoint of the higher education of librarians, the teaching of systems of classification ... would be perhaps better conducted by including courses in the systematic encyclopedia and methodology of all the sciences, that is to say, outlines which try to summarize the most recent results in the relation to one another in which they are now studied together. ... (Ernest Cushing Richardson, quoted from Bliss, 1935, p. 2) Among the other principles, which may be attributed to the traditional approach to KO are: Principle of controlled vocabulary Cutter's rule about specificity Hulme's principle of literary warrant (1911) Principle of organizing from the general to the specific Today, after more than 100 years of research and development in LIS, the "traditional" approach still has a strong position in KO and in many ways its principles still dominate. === Facet analytic approaches === The date of the foundation of this approach may be chosen as the publication of S. R. Ranganathan's colon classification in 1933. The approach has been further developed by, in particular, the British Classification Research Group. The best way to explain this approach is probably to explain its analytico-synthetic methodology. The meaning of the term "analysis" is: breaking down each subject into its basic concepts. The meaning of the term synthesis is: combining the relevant units and concepts to describe the subject matter of the information package in hand. Given subjects (as they appear in, for example, book titles) are first analyzed into a few common categories, which are termed "facets". Ranganathan proposed his PMEST formula: Personality, Matter, Energy, Space and Time: Personality is the distinguishing characteristic of a subject. Matter is the physical material of which a subject may be composed. Energy is any action that occurs with respect to the subject. Space is the geographic component of the location of a subject. Time is the period associated with a subject. === The information retrieval tradition (IR) === Important in the IR-tradition have been, among others, the Cranfield experiments, which were founded in the 1950s, and the TREC experiments (Text Retrieval Conferences) starting in 1992. It was the Cranfield experiments, which introduced the measures "recall" and "precision" as evaluation criteria for systems efficiency. The Cranfield experiments found that classification systems like UDC and facet-analytic systems were less efficient compared to free-text searches or low level indexing systems ("UNITERM"). The Cranfield I test found, according to Ellis (1996, 3–6) the following results: Although these results have been criticized and questioned, the IR-tradition became much more influential while library classification research lost influence. The dominant trend has been to regard only statistical averages. What has largely been neglected is to ask: Are there certain kinds of questions in relation to which other kinds of representation, for example, controlled vocabularies, may improve recall and precision? === User-oriented and cognitive views === The best way to define this approach is probably by method: Systems based upon user-oriented approaches must specify how the design of a system is made on the basis of empirical studies of users. User studies demonstrated very early that users prefer verbal search systems as opposed to systems based on classification notations. This is one example of a principle derived from empirical studies of users. Adherents of classification notations may, of course, still have an argument: That notations are well-defined and that users may miss important information by not considering them. Folksonomies is a recent kind of KO based on users' rather than on librarians' or subject specialists' indexing. === Bibliometric approaches === These approaches are primarily based on using bibliographical references to organize networks of papers, mainly by bibliographic coupling (introduced by Kessler 1963) or co-citation analysis ( independently suggested by Marshakova 1973 and Small 1973). In recent years it has become a popular activity to construe bibliometric maps as structures of research fields. Two considerations are important in considering bibliometric approaches to KO: The level of indexing depth is partly determined by the number of terms assigned to each document. In citation indexing this corresponds to the number of references in a given paper. On the average, scientific papers contain 10–15 references, which provide quite a high level of depth. The references, which function as access points, are provided by the highest subject-expertise: The experts writing in the leading journals. This expertise is much higher than that which library catalogs or bibliographical databases typically are able to draw on. === The domain analytic approach === Domain analysis is a sociological-epistemological standpoint that advocates that the indexing of a given document should reflect the needs of a given group of users or a given ideal purpose. In other words, any description or representation of a given document is more or less suited to the fulfillment of certain tasks. A description is never objective or neutral, and the goal is not to standardize descriptions or make one description once and for all for different target groups. The develo

  Read more →