AI Essay Planner

AI Essay Planner — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Biohybrid system

Biohybrid systems refer to the integration of biological materials, such as cells or tissues, with artificial components, including electronics or mechanical structure. This combination incorporates the capabilities of living organisms with the precision of man-made technology. As a result, these systems perform tasks that neither biology nor machines could achieve independently. Biohybrid systems might use lab-cultured muscle cells to power small robots or combine sensors with living tissue for better health sensing. The intent behind these systems is to combine the benefits of biological and technological components to introduce new solutions for complex medical challenges. Biohybrid systems may have transformative potential across sectors, such as robotics to create actuators and sensors that mimic natural muscle and nerve function, medicine in developing smart implants and drug delivery systems, in prosthetics for enhancing user control through neural or muscular interfaces and environmental sustainability for deploying biohybrid solutions for pollution sensing or remediation. == Origin == The term "biohybrid" is a compound of "bio" from biology (meaning life) and "hybrid" (referring to a combination of distinct elements), denoting a field of study. Its use helps distinguish such systems from purely biological constructs or entirely synthetic machines. Early academic mentions may include bio actuated robotics papers and foundational tissue-robot integration studies published in journals like Nature Biotechnology or Science Robotics. The emergence of the term reflects a growing recognition of the need to describe systems that do not fit cleanly into traditional categories. == Design principles == One of the most significant biohybrid challenges is to engineer interfaces between living tissue and artificial materials that are efficient. This means having precise control over adhesion at the surface, diffusion of nutrients, and signal conduction. Actuation mechanisms within the heart of these systems generate movement or mechanical response. These may be in the form of living muscle cells such as skeletal myocytes or cardiomyocytes, soft pneumatic actuators, or electrical stimulation-responsive tissues. Materials selection is equally critical. Hydrogels, elastomers like PDMS (polydimethylsiloxane), and biopolymers are commonly used due to their softness and biocompatibility. These materials must support cell viability, resist immune attack, and allow the integration of mechanical or electrical components. == Key components == At their core, biohybrid systems work by bridging living biological parts with technology. Through this integration, functionality that neither system could accomplish singularly is possible. Biological parts may be cells, tissues, or even organs—occasionally cultured in a laboratory setting. These biological parts carry out biologically inspired behaviors, such as muscle contraction or chemical sensing in the body. Technological components may constitute devices like sensors, electronic components, and mechanical structure. These manipulate the system, supply power, or transfer data. An example is a sensor that is implantable within a body and detects glucose levels as it sends information to a smart phone. By integrating these artificial and biological parts, biohybrid systems can perform advanced functions, such as tissue regeneration, real-time health monitoring, or the recovery of motor function in paralysis patients. Biohybrid systems generally consist of two major components: the biological and the mechanical. Biological components may include muscle cells for contraction, endothelial cells for vascularization, and stem cells for regenerative capabilities. Mechanical components comprise soft actuators that mimic organic motion, synthetic scaffolds that provide support and structure, and microfluidic systems that facilitate the delivery of nutrients and removal of waste. These components are combined in a manner that allows for dynamic, lifelike behavior—such as the contraction of tissue or the propagation of mechanical waves—while maintaining biocompatibility and durability. == Applications == The range of applications for biohybrid systems is broad and continuously expanding. In robotics, biohybrid structures have been used to engineer microscopic, muscle-driven machines, such as Harvard University's biohybrid stingray robot. In medical applications, they offer new alternatives for organ repair and augmentation, including biohybrid heart valves and esophageal scaffolds. Biohybrids are also promising in neural interfaces, where the goal is to create long-lasting, stable interaction between mechanical devices and brain tissue. Muscle-actuated drug response platforms are under exploration in pharmacology for modelling and real-time screening. == Examples == Several high-profile research projects have demonstrated the potential of biohybrid systems: Harvard researchers developed a biohybrid swimming ray powered by rat cardiac cells layered onto a gold skeleton, mimicking the motion of a real stingray. At the Massachusetts Institute of Technology, a cardiac pump actuated entirely by living heart muscle cells was engineered to simulate the behavior of a beating heart. Bio actuated soft robots have been built to simulate gut peristalsis, using muscle contractions to replicate natural wave-like movement in the digestive tract. == Challenges and limitations == As with many technologies that involve living systems, biohybrid systems raise important ethical and biomedical questions. Cell sourcing remains a key issue, particularly when embryonic or animal-derived cells are used. Long-term viability is another concern—living tissues must be kept alive with nutrients and oxygen, and they often degrade or elicit immune responses when implanted. Powering these biological parts presents logistical and ethical hurdles as well. Systems must either include internal mechanisms for nutrient delivery or be supported externally, which can limit portability and independence. == Future directions == Researchers are exploring self-directed, self-regulated organ substitutes and regenerative implants that can respond to their surroundings in real-time. These systems may be integrated with artificial intelligence to make them adjust to stimuli and coordinate complex behaviors. Future potential applications are wearable biohybrid systems for rehabilitation, space medicine devices for long-duration missions, and implantable devices that integrate into human physiology.
Read more →
Google Tasks

Google Tasks is a task management application developed by Google and included with Google Workspace. Included initially as a feature in Gmail and Google Calendar, Google Tasks launched as a core product with a standalone app in 2018. It is available for Android and iOS, as well as in the right-hand side panel on Google Workspace apps on the web and in Google Calendar. == History and development == Google Tasks began as an integration within other apps in G Suite (now Google Workspace), allowing to-do items to be created in Calendar and Gmail. Upon graduating to a core service on June 28, 2018, Google Tasks launched as a dedicated mobile app in which tasks can be sorted into lists, managed, and completed. Google Tasks launched the ability to create tasks from Google Chat messages in 2022.
Read more →
Group of Governmental Experts on Lethal Autonomous Weapons Systems

The Group of Governmental Experts on Lethal Autonomous Weapons Systems, commonly known as the GGE on LAWS, refers to a group of governmental experts established under the framework of the Convention on Certain Conventional Weapons (CCW), a United Nations arms control framework. The group examines legal, ethical, societal and moral questions that arise from the increased use of autonomous robots to carry weapons and to be programmed to engage in combat in various situations that might arise, including battles between countries, or in patrolling border areas or sensitive areas, or other similar roles. As of 18 March 2025, the Convention on Certain Conventional Weapons had 128 High Contracting Parties. In the Geneva Conventions, the term "High Contracting Parties" refers to the states that have joined the conventions and are therefore bound to uphold them. Among the countries that have joined are states with tense relations or ongoing armed conflict with one another, including Russia and Ukraine, Israel and the State of Palestine, and Pakistan and Afghanistan. == Background == In 2013, the Meeting of State Parties to the Convention on Certain Conventional Weapons agreed on a mandate on lethal autonomous weapon systems and tasked its chairperson with convening an informal Meeting of Experts to discuss issues related to emerging technologies in the area of LAWS. Those informal Meetings of Experts were then held in 2014, 2015 and 2016, and their reports fed into subsequent meetings of the High Contracting Parties. At the Fifth CCW Review Conference in 2016, the High Contracting Parties decided to establish an open-ended Group of Governmental Experts on emerging technologies in the area of LAWS, building on the earlier expert meetings. Since then, the group has been reconvened annually. In 2023, the Meeting of the High Contracting Parties to the CCW decided that the GGE on LAWS would continue its work in 2024 and 2025. The group was tasked with developing, by consensus, elements of a possible instrument, without predetermining its form, as well as other measures addressing lethal autonomous weapon systems, drawing on existing CCW protocols, earlier recommendations, state proposals, and legal, military, and technological expertise. == 2024 == In 2024, the GGE met twice, and the group was chaired by Robert in den Bosch, the Netherlands' disarmament ambassador. The 2024 Meeting of the High Contracting Parties decided that the group would meet for 10 days in 2025, in two five-day sessions, and reaffirmed its mandate to continue work by consensus on possible elements of an instrument and other measures addressing lethal autonomous weapon systems. == 2025 == At its first 2025 session, held in Geneva from 3 to 7 March 2025, the Group of Governmental Experts on Lethal Autonomous Weapon Systems discussed revisions to the chair's rolling text. The text was structured into five sections, or "boxes", though delegates held differing views on whether headings were useful or appropriate. Broadly, the discussions covered the characterization of lethal autonomous weapon systems, the application of international humanitarian law, possible prohibitions and regulations, legal review, and questions of accountability and responsibility. At its second session, held from 1 to 5 September 2025, delegations continued work on the chair's rolling text, which set out elements of a possible instrument and was organized into five thematic "boxes". == 2026 == === Developments before the 2026 session === A few weeks before the meeting, autonomous weapons drew renewed attention when the United States pressured Anthropic to revise the terms of use for its AI model Claude. Anthropic prohibited the model's use for mass domestic surveillance and for fully autonomous weapons operating without human oversight, while reports also emerged that OpenAI had reached an agreement with the U.S. Department of War for the use of its AI models, reportedly stipulating that they would not independently direct autonomous weapons where human control was required. The U.S. military nevertheless continued to use Claude during its war on Iran, and there was increasing alarm about the use of AI-assisted semi-autonomous weapons in conflicts including those in Ukraine, Sudan, Gaza, and Iran. Before the start of the sessions, Robert in den Bosch, as chair, warned that progress was urgent because technological developments were moving quickly. At the same time, although states agreed that international humanitarian law applied to LAWS, specific internationally binding standards governing such systems remained largely absent. A key divide before the session was that Russia and the United States opposed new legally binding instruments, while other states argued that new rules were necessary. According to Robert in den Bosch, the talks could lead to new rules, amendments to an existing convention, or a new treaty. === First session === From 2 to 6 March 2026, the group held its penultimate session under the group's three-year mandate. Delegations discussed the chair's rolling draft text, circulated in December 2025, on elements of a possible instrument or other measures concerning lethal autonomous weapon systems. In revised text circulated by the chair on 5 March 2026, a lethal autonomous weapon system was characterized as "a functionally integrated combination of one or more weapons and technological components, that can identify, select, and engage a target, without intervention by a human operator in the execution of these tasks". The text was divided into five boxes to structure discussion. During the session, delegates conducted a first reading of the draft text, and the chair later circulated revised language for several sections. Informal consultations were also held. According to campaign groups and participating observers, support grew during the week for moving to negotiations on the basis of the rolling text, with more than 70 states said to support that step by the end of the session, though some participants warned that attempts to bridge differences risked blurring the group's core purpose. The International Committee of the Red Cross argued that the text should not only restate existing international humanitarian law, but also clarify how those rules apply to autonomous weapons and set out additional measures tailored to the specific challenges such systems raise. Stop Killer Robots likewise emphasized the need to preserve meaningful human judgment and control over increasingly autonomous systems. During the discussions, the U.S. delegation opposed the term "human control" and reportedly proposed the alternative phrase "good faith human judgment and care". Other delegations rejected that wording as too weak, while many states continued to insist that meaningful human control over weapon systems remained essential.
Read more →
Scene statistics

Scene statistics is a discipline within the field of perception. It is concerned with the statistical regularities related to scenes. It is based on the premise that a perceptual system is designed to interpret scenes. Biological perceptual systems have evolved in response to physical properties of natural environments. Therefore natural scenes receive a great deal of attention. Natural scene statistics are useful for defining the behavior of an ideal observer in a natural task, typically by incorporating signal detection theory, information theory or estimation theory. == Within-domain versus across-domain == Geisler (2008) distinguishes between four kinds of domains: (1) Physical environments (2) Images/Scenes (3) Neural responses and (4) Behavior. Within the domain of images/scenes one can study the characteristics of information related to redundancy and efficient coding. Across-domain statistics determine how an autonomous system should make inferences about its environment, process information and control its behavior. To study these statistics it is necessary to sample or register information in multiple domains simultaneously. == Applications == === Prediction of picture and video quality === One of the most successful applications of Natural Scenes Statistics Models has been perceptual picture and video quality prediction. For example, the Visual Information Fidelity (VIF) algorithm, which is used to measure the degree of distortion of pictures and videos, is used extensively by the image and video processing communities to assess perceptual quality. This is often after processing, such as compression, which can degrade the appearance of a visual signal. The premise is that the scene statistics are changed by distortion and that the visual system is sensitive to the changes in the scene statistics. VIF is heavily used in the streaming television industry. Other popular picture quality models that use natural scene statistics include BRISQUE and NIQE, both of which are no-reference since they do not require any reference picture to measure quality against.
Read more →
Nice (app)

Nice is a photo-sharing mobile app developed by Nice App Mobile Technology Co., Ltd. (Chinese: 北京极赞科技有限公司) in China. The app allows users to tag specific locations on images, enabling detailed labeling of items such as clothing and accessories. The company received a $36 million investment in C-round funding in 2014. Nice had 30 million registered users and 12 million active users as of late 2015. As of January 2024, it remained a popular app, the 6th most-downloaded in the iOS App Store for China. == Official website == Official website
Read more →
Autonomous aircraft

An autonomous aircraft is an aircraft which flies under the control of on-board autonomous robotic systems and needs no intervention from a human pilot or remote control. Most contemporary autonomous aircraft are unmanned aerial vehicles (drones) with pre-programmed algorithms to perform designated tasks, but advancements in artificial intelligence technologies (e.g. machine learning) mean that autonomous control systems are reaching a point where several air taxis and associated regulatory regimes are being developed. == History == === Unmanned aerial vehicles === The earliest recorded use of an unmanned aerial vehicle for warfighting occurred in July 1849, serving as a balloon carrier (the precursor to the aircraft carrier) Significant development of radio-controlled drones started in the early 1900s, and originally focused on providing practice targets for training military personnel. The earliest attempt at a powered UAV was A. M. Low's "Aerial Target" in 1916. Autonomous features such as the autopilot and automated navigation were developed progressively through the twentieth century, although techniques such as terrain contour matching (TERCOM) were applied mainly to cruise missiles. Before the introduction of the Bayraktar Kızılelma some modern drones have a high degree of autonomy, although they were not fully capable and the regulatory environment prohibits their widespread use in civil aviation. However some limited trials had been undertaken. On December 17, 2025, two Bayraktar Kızılelma performed the world's first autonomous close-formation flight by two unmanned fighter jets, using artificial intelligence. This was the first time in the history of aviation when two unmanned aerial vehicles flew in close formation on their own. === Passengers === As flight, navigation and communications systems have become more sophisticated, safely carrying passengers has emerged as a practical possibility. Autopilot systems are relieving the human pilot of progressively more duties, but the pilot currently remains necessary. A number of air taxis are under development and larger autonomous transports are also being planned. The personal air vehicle is another class where from one to four passengers are not expected to be able to pilot the aircraft and autonomy is seen as necessary for widespread adoption. == Control system architecture == The computing capability of aircraft flight and navigation systems followed the advances of computing technology, beginning with analog controls and evolving into microcontrollers, then system-on-a-chip (SOC) and single-board computers (SBC). === Sensors === Position and movement sensors give information about the aircraft state. Exteroceptive sensors deal with external information like distance measurements, while proprioceptive ones correlate internal and external states. Degrees of freedom (DOF) refers to both the amount and quality of sensors on board: 6 DOF implies 3-axis gyroscopes and accelerometers (a typical inertial measurement unit – IMU), 9 DOF refers to an IMU plus a compass, 10 DOF adds a barometer and 11 DOF usually adds a GPS receiver. === Actuators === UAV actuators include digital electronic speed controllers (which control the RPM of the motors) linked to motors/engines and propellers, servomotors (for planes and helicopters mostly), weapons, payload actuators, LEDs and speakers. === Software === UAV software called the flight stack or autopilot. The purpose of the flight stack is to obtain data from sensors, control motors to ensure UAV stability, and facilitate ground control and mission planning communication. UAVs are real-time systems that require rapid response to changing sensor data. As a result, UAVs rely on single-board computers for their computational needs. Examples of such single-board computers include Raspberry Pis, Beagleboards, etc. shielded with NavIO, PXFMini, etc. or designed from scratch such as NuttX, preemptive-RT Linux, Xenomai, Orocos-Robot Operating System or DDS-ROS 2.0. Civil-use open-source stacks include: Due to the open-source nature of UAV software, they can be customized to fit specific applications. For example, researchers from the Technical University of Košice have replaced the default control algorithm of the PX4 autopilot. This flexibility and collaborative effort has led to a large number of different open-source stacks, some of which are forked from others, such as CleanFlight, which is forked from BaseFlight and from which three other stacks are forked from. === Loop principles === UAVs employ open-loop, closed-loop or hybrid control architectures. Open loop – This type provides a positive control signal (faster, slower, left, right, up, down) without incorporating feedback from sensor data. Closed loop – This type incorporates sensor feedback to adjust behavior (reduce speed to reflect tailwind, move to altitude 300 feet). The PID controller is common. Sometimes, feedforward is employed, transferring the need to close the loop further. == Communications == Most UAVs use a radio for remote control and exchange of video and other data. Early UAVs had only narrowband uplink. Downlinks came later. These bi-directional narrowband radio links carried command and control (C&C) and telemetry data about the status of aircraft systems to the remote operator. For very long range flights, military UAVs also use satellite receivers as part of satellite navigation systems. In cases when video transmission was required, the UAVs will implement a separate analog video radio link. In most modern autonomous applications, video transmission is required. A broadband link is used to carry all types of data on a single radio link. These broadband links can leverage quality of service techniques to optimize the C&C traffic for low latency. Usually, these broadband links carry TCP/IP traffic that can be routed over the Internet. Communications can be established with: Ground control – a military ground control station (GCS). The MAVLink protocol is increasingly becoming popular to carry command and control data between the ground control and the vehicle. Remote network system, such as satellite duplex data links for some military powers. Downstream digital video over mobile networks has also entered consumer markets, while direct UAV control uplink over the cellular mesh and LTE have been demonstrated and are in trials. Another aircraft, serving as a relay or mobile control station – military manned-unmanned teaming (MUM-T). As mobile networks have increased in performance and reliability over the years, drones have begun to use mobile networks for communication. Mobile networks can be used for drone tracking, remote piloting, over the air updates, and cloud computing. Modern networking standards have explicitly considered autonomous aircraft and therefore include optimizations. The 5G standard has mandated reduced user plane latency to 1ms while using ultra-reliable and low-latency communications. == Autonomy == Basic autonomy comes from proprioceptive sensors. Advanced autonomy calls for situational awareness, knowledge about the environment surrounding the aircraft from exteroceptive sensors: sensor fusion integrates information from multiple sensors. Civil aviation regulators and standards bodies have published high-level roadmaps and discussion papers focused on assurance, safety and governance of AI-enabled systems in aviation, particularly as autonomy increases in operations and decision support. === Basic principles === One way to achieve autonomous control employs multiple control-loop layers, as in hierarchical control systems. As of 2016 the low-layer loops (i.e. for flight control) tick as fast as 32,000 times per second, while higher-level loops may cycle once per second. The principle is to decompose the aircraft's behavior into manageable "chunks", or states, with known transitions. Hierarchical control system types range from simple scripts to finite state machines, behavior trees and hierarchical task planners. The most common control mechanism used in these layers is the PID controller which can be used to achieve hover for a quadcopter by using data from the IMU to calculate precise inputs for the electronic speed controllers and motors. Examples of mid-layer algorithms: Path planning: determining an optimal path for vehicle to follow while meeting mission objectives and constraints, such as obstacles or fuel requirements Trajectory generation (motion planning): determining control maneuvers to take in order to follow a given path or to go from one location to another Trajectory regulation: constraining a vehicle within some tolerance to a trajectory Evolved UAV hierarchical task planners use methods like state tree searches or genetic algorithms. === Autonomy features === UAV manufacturers often build in specific autonomous operations, such as: Self-level: attitude stabilization on the pitch and roll axes. Altitude hold: The aircraft maint
Read more →
Necrobotics

Necrobotics is the practice of using biotic materials (or dead organisms) as robotic components. Necrobotics can serve as an alternative to mechanical components that are difficult to manufacture by using biological components designed by natural selection in order to exploit the highly developed selective design implemented in biological lifeforms via the process of evolution. In July 2022, researchers in the Preston Innovation Lab at Rice University in Houston, Texas published a paper in Advanced Science introducing the concept and demonstrating its capability by repurposing dead spiders as robotic grippers and applying pressurized air to activate their gripping arms. In April 2025 researchers at Shinshu University created a “bio-hybrid drone” using silk-worm moth antennae to detect the source of a smell. In November 2025 researchers at McGill University demonstrated the use of a mosquito proboscis as a fine nozzle in experimental 3D printing. Necrobotics utilizes the spider's organic hydraulic system and their compact legs to create an efficient and simple gripper system. The necrobotic spider gripper is capable of lifting small and light objects, thereby serving as an alternative to complex and costly small mechanical grippers. == Background == The main appeal of the spider's body in necrobotics is its compact leg mechanism and use of hydraulic pressure. The spider's anatomy utilizes a simple hydraulic (fluid) pressure system. Spider legs have flexor muscles that naturally constrict their legs when relaxed. A force is required to straighten and extend their legs, which spiders accomplish by pumping hemolymph fluid (blood) through their joints as a means of hydraulic pressure. It takes no external power to curl their legs due to their flexor muscles' natural curled state. In July 2022, researchers in the Preston Innovation Lab at Rice University published a paper detailing their experiments with the gripper. Although dead spiders no longer produce hemolymph, Te Faye Yap (lead author and mechanical engineering graduate) found that pumping air through a needle into the spider's cephalothorax (main body) accomplishes the same results as hemolymph. The original hydraulic (fluid) system is essentially converted into a pneumatic (air) system. == Fabrication == Obtain a spider Euthanize the spider using a cold temperature of around -4°C for 5-7 days Insert a 25 gauge hypodermic needle into the spider's cephalothorax (main body) Apply glue around the needle to form a seal and allow it to dry Connect a syringe or pump to the needle Extend the spider's legs by pumping air in == Testing and Data == === Internal Force Versus Gripping Force === The typical pressure in a resting spider's legs ranges from 4 kPa to 6.1 kPa. Researchers extended the legs by increasing the spider's internal pressure to 5.5 kPa. Pumping air into the body increases the internal pressure, causing the legs to expand. Pumping air out of the body decreases internal pressure, causing the legs to contract due to their flexor leg muscles. When the internal pressure decreases to 0 kPa, the gripper would be fully closed, allowing for the gripper to grasp objects. This action demonstrates that as internal pressure decreases, the gripping force increases. Inversely, when internal pressure increases, the gripping force decreases. By gripping individual weighted acetate beads, it is found that the necrobotic gripper achieves a maximum gripping force of 0.35 milinewtons. === Spider Weight Versus Gripping Force === To estimate the gripping forces of smaller and larger spiders, researchers created a plot to predict the gripping force relative to the size of the spider. The wolf spider's body weight is relatively equal to the gripping force of its legs. The mass of the gripper is 33.5 mg and can lift 1.3 times its body weight (43.6 mg or 0.35 mN). However, with larger spiders, the gripping force relative to body weight decreases. For example, a 200-gram goliath birdeater is predicted to lift 10% of its weight (20 grams or 196 mN). Though there is an inverse relationship between spider mass and gripping force, larger spiders exert greater gripping forces than smaller spiders. === Gripper Lifespan === The necrobotic gripper's functionality is entirely reliant on the structural integrity of the spider. If the spider were to break down easily and frequently, the gripper would not be practical. Using cyclic testing, a series of repeated actions, it is found that the necrobotic gripper can actuate 700 to 1000 times. After 1000 cycles, cracks begin forming on the membrane of the leg joints due to dehydration. Weakened and decomposing joints lead to frequent breakage and replacement, thereby serving as an obstacle in applying necrobotics to real-world scenarios. One theorized fix to this issue is applying beeswax or a lubricant to the joints. Researchers found that over 10 days, the mass of an uncoated spider decreased 17 times more than the mass of a spider coated with beeswax. Lubricating joints combats dehydration and slows the loss of organic material. == Constraints == With the usage of organic material, there is a higher chance of the component decomposing and breaking down as opposed to traditional mechanical systems. There may be additional work and management required to replace these grippers if they fail. Additionally, organic inconsistencies with the spiders will yield inaccurate results. Not all wolf spiders develop the same, so gripping force and leg contraction can vary between grippers. There are moral implications behind euthanizing spiders for robotics. The ethical boundaries that necrobotics push in the pursuit of biohybrid systems raise concerns, as opponents say it may lead to the hybridization of mammals and is intrusive to nature. Proponents respond that repurposing dead animals has been human practice for millennia and that necrobotics should be pursued to advance science.
Read more →
ARIS Express

ARIS Express is a free-of-charge modeling tool for business process analysis and management. It supports different modeling notations such as BPMN 2, Event-driven Process Chains (EPC), Organizational charts, process landscapes, whiteboards, etc. ARIS Express was initially developed by IDS Scheer, which was bought by Software AG in December 2010. The tool is provided as freeware on the ARIS Community webpage. ARIS Express is notable - having been mentioned in research published by Schumm, Garcia, Krumnow and Greenwood amongst others. == History == ARIS Express was first announced on April 28, 2009 in a press release by IDS Scheer. The first release was on July 28, 2009 in a public beta test on ARIS Community. Only people, who registered before for the beta test were allowed to download and test this beta version. This closed beta test was followed with another public beta test. The official release of ARIS Express 1.0 was on September 9, 2009. In this first stable version, features such as Microsoft Visio import were added, which were not present in the version for the public beta test. On February 26, 2010, ARIS Express 2.0 was released. Major changes compared to version 1.0 include BPMN 2 support, integrated spellchecking and ARISalign integration. On May 25, 2010, version 2.1 of ARIS Express was released. This update improves BPMN 2 support, provides a new online help system for instant feedback, better ARISalign integration and some new symbols in different diagrams. Along with the release, a poster showing the most important modeling concepts supported by ARIS Express was released. In addition, an executable setup is provided for Microsoft Windows-based systems. Beginning of July, an update was released as ARIS Express 2.2, providing bug fixes only. ARIS Express version 2.2 is the current stable release. An official press release published mid of August 2010 said there are more than 50,000 downloads of ARIS Express. On February 2, 2011, version 2.3 of ARIS Express was released. This new version changes the file format of ARIS Express so that models can be shown in an interactive model viewer in ARIS Community. The release announcement contained no details about additional features or changes. == Functionality == === Overview === ARIS Express is a standalone single-user application. It is divided in a home screen and a modeling environment. The home screen is used to create new models or open recently edited ones. The modeling environment is used to edit diagrams. === Supported notations === The following notations are supported by ARIS Express. Users can create diagrams containing an unlimited number of modeling objects. BPMN 2 Collaboration Diagrams Event-driven Process Chains (EPC) Organizational charts Process landscape (value-added chain diagram) Data model in ERM notation IT infrastructure (network diagram) System landscape (component diagram) Whiteboard General diagram === Noteworthy features === Besides common features such as creating new diagrams, saving them as files or adding objects to the modeling canvas, ARIS Express also provides some noteworthy features, which can't be found in most comparable modeling tools. fragments - Often used modeling constructs such as an exclusive decision in a process model can be stored as fragments so that they are available for direct reuse in another model. smart designs - The flow of a process model or hierarchies of other models can be captured in a spreadsheet-like interface. While entering the data in the spreadsheet, the model is generated and laid out in the background while typing. mini toolbar - While moving the mouse pointer over an object in a diagram, a small toolbar is shown allowing quick access to the most important modeling actions. Microsoft Visio import - Diagrams created with Microsoft Visio 2007 or above can be imported to and edited in ARIS Express. A Microsoft Visio export is not provided. ARISalign import - Models created on the online collaboration platform ARISalign can be opened and edited in ARIS Express. === Exports === ARIS Express can export diagrams to different formats such as: PDF JPEG PNG EMF ADF ADF is the file format of ARIS Express. The professional tools of ARIS Platform are able to import diagrams stored in the ADF format. Yet, there are major limitations during import - namely, each object in diagram will be treated as unique object, despite having same type and name, forcing redrawing large sections of diagrams after import. Besides export formats, it is also possible to use the clipboard to copy and paste an ARIS Express diagram into typical office suites such as Microsoft PowerPoint. == Technology == ARIS Express is a Java-based application, which shares some of the features of ARIS Platform products such as ARIS Business Architect and ARIS Business Designer. In contrast to ARIS Platform products, ARIS Express doesn't use a central database for model storage. Instead, each diagram is stored in an ADF file. ARIS Express uses Java Web Start. After download, the application can be started immediately without installation procedure. For Microsoft Windows based systems, an ordinary setup is provided, too. ARIS Express requires Java 1.6.10 or above. On first startup, the user must enter a valid ARIS Community account to register the application. Creating an ARIS Community account is free-of-charge. After installation, no Internet connection is needed to use ARIS Express. ARIS Express uses a mechanism provided by Java Web Start to automatically update the application as soon as a new version becomes available and the user is connected to the Internet during startup. There are reports that this automated update failed while upgrading from version 1.0 to version 2.0. As ARIS Express is based on Java Web Start, it can be installed on any platform supported by Java. The ARIS Community and other Internet sources have reports of successful deployment of ARIS Express on other operating systems than Microsoft Windows. However, ARIS Express is officially supported only on Microsoft Windows. == Miscellaneous == A quick reference sheet is available for ARIS Express. The poster shows all supported diagrams plus the most important modelling concepts for each supported modelling language. ARIS Express contains a hidden game, a so-called Easter Egg. The game can be started by clicking several times on the product logo in the about dialog. Highscores achieved in the game can be submitted to a special page in ARIS Community. A Firefox Personas is available for ARIS Express.
Read more →
Graphics address remapping table

The graphics address remapping table (GART), also known as the graphics aperture remapping table, or graphics translation table (GTT), is an I/O memory management unit (IOMMU) used by Accelerated Graphics Port (AGP) and PCI Express (PCIe) graphics cards. The GART allows the graphics card direct memory access (DMA) to the host system memory, through which buffers of textures, polygon meshes and other data are loaded. AMD later reused the same mechanism for I/O virtualization with other peripherals including disk controllers and network adapters. A GART is used as a means of data exchange between the main memory and video memory through which buffers (i.e. paging/swapping) of textures, polygon meshes and other data are loaded, but can also be used to expand the amount of video memory available for systems with only integrated or shared graphics (i.e. no discrete or inbuilt graphics processor), such as Intel HD Graphics processors. However, this type of memory (expansion) remapping has a caveat that affects the entire system: specifically, any GART, pre-allocated memory becomes pooled and cannot be utilised for any other purposes but graphics memory and display rendering. Since PCI Express, the GART is extended to the GTT (Graphics Translation Table), which act as a buffer or cache between system memory and graphics card, and in PCI Express, the GTT buffer size is changeable by the GPU driver. == Operating system support == === Windows === Support for AGP GART was added since Windows 95 OSR2. Later, support for GTT was added since Windows XP SP2 and Windows Vista. === Linux === Jeff Hartmann served as the primary maintainer of the Linux kernel's agpgart driver, which began as part of Brian Paul's Utah GLX accelerated Mesa 3D driver project. The developers primarily targeted Linux 2.4.x kernels, but made patches available against older 2.2.x kernels. Dave Jones heavily reworked agpgart for the Linux 2.6.x kernels, along with more contributions from Jeff Hartmann. === FreeBSD === In FreeBSD, the agpgart driver appeared in its 4.1 release. === Solaris === AGPgart support was introduced into Solaris Express Developer Edition as of its 7/05 release.
Read more →
Network Abstraction Layer

The Network Abstraction Layer (NAL) is a part of the H.264/AVC and HEVC video coding standards. The main goal of the NAL is the provision of a "network-friendly" video representation addressing "conversational" (video telephony) and "non conversational" (storage, broadcast, or streaming) applications. NAL has achieved a significant improvement in application flexibility relative to prior video coding standards. == Introduction == An increasing number of services and growing popularity of high definition TV are creating greater needs for higher coding efficiency. Moreover, other transmission media such as cable modem, xDSL, or UMTS offer much lower data rates than broadcast channels, and enhanced coding efficiency can enable the transmission of more video channels or higher quality video representations within existing digital transmission capacities. Video coding for telecommunication applications has diversified from ISDN and T1/E1 service to embrace PSTN, mobile wireless networks, and LAN/Internet network delivery. Throughout this evolution, continued efforts have been made to maximize coding efficiency while dealing with the diversification of network types and their characteristic formatting and loss/error robustness requirements. The H.264/AVC and HEVC standards are designed for technical solutions including areas like broadcasting (over cable, satellite, cable modem, DSL, terrestrial, etc.) interactive or serial storage on optical and magnetic devices, conversational services, video-on-demand or multimedia streaming, multimedia messaging services, etc. Moreover, new applications may be deployed over existing and future networks. This raises the question about how to handle this variety of applications and networks. To address this need for flexibility and customizability, the design covers a NAL that formats the Video Coding Layer (VCL) representation of the video and provides header information in a manner appropriate for conveyance by a variety of transport layers or storage media. The NAL is designed in order to provide "network friendliness" to enable simple and effective customization of the use of VCL for a broad variety of systems. The NAL facilitates the ability to map VCL data to transport layers such as: RTP/IP for any kind of real-time wire-line and wireless Internet services. File formats, e.g., ISO MP4 for storage and MMS. H.32X for wireline and wireless conversational services. MPEG-2 systems for broadcasting services, etc. The full degree of customization of the video content to fit the needs of each particular application is outside the scope of the video coding standardization effort, but the design of the NAL anticipates a variety of such mappings. Some key concepts of the NAL are NAL units, byte stream, and packet formats uses of NAL units, parameter sets, and access units. A short description of these concepts is given below. == NAL units == The coded video data is organized into NAL units, each of which is effectively a packet that contains an integer number of bytes. The first byte of each H.264/AVC NAL unit is a header byte that contains an indication of the type of data in the NAL unit. For HEVC the header was extended to two bytes. All the remaining bytes contain payload data of the type indicated by the header. The NAL unit structure definition specifies a generic format for use in both packet-oriented and bitstream-oriented transport systems, and a series of NAL units generated by an encoder is referred to as a NAL unit stream. == NAL Units in Byte-Stream Format Use == Some systems require delivery of the entire or partial NAL unit stream as an ordered stream of bytes or bits within which the locations of NAL unit boundaries need to be identifiable from patterns within the coded data itself. For use in such systems, the H.264/AVC and HEVC specifications define a byte stream format. In the byte stream format, each NAL unit is prefixed by a specific pattern of three bytes called a start code prefix. The boundaries of the NAL unit can then be identified by searching the coded data for the unique start code prefix pattern. The use of emulation prevention bytes guarantees that start code prefixes are unique identifiers of the start of a new NAL unit. A small amount of additional data (one byte per video picture) is also added to allow decoders that operate in systems that provide streams of bits without alignment to byte boundaries to recover the necessary alignment from the data in the stream. Additional data can also be inserted in the byte stream format that allows expansion of the amount of data to be sent and can aid in achieving more rapid byte alignment recovery, if desired. == NAL Units in Packet-Transport System Use == In other systems (e.g., IP/RTP systems), the coded data is carried in packets that are framed by the system transport protocol, and identification of the boundaries of NAL units within the packets can be established without use of start code prefix patterns. In such systems, the inclusion of start code prefixes in the data would be a waste of data carrying capacity, so instead the NAL units can be carried in data packets without start code prefixes. == VCL and Non-VCL NAL Units == NAL units are classified into VCL and non-VCL NAL units. VCL NAL units contain the data that represents the values of the samples in the video pictures. Non-VCL NAL units contain any associated additional information such as parameter sets (important header data that can apply to a large number of VCL NAL units) and supplemental enhancement information (timing information and other supplemental data that may enhance usability of the decoded video signal but are not necessary for decoding the values of the samples in the video pictures). == Parameter Sets == A parameter set contains shared configuration data that is carried in non-VCL NAL units. Parameter sets are typically reused when decoding many coded pictures within a video sequence. Each VCL NAL unit references a picture parameter set (PPS), which in turn references a sequence parameter set (SPS). There are two types of parameter sets: Sequence parameter set (SPS), which specifies mostly constant configuration such as resolution, bit depth, or chroma format. (For a concrete implementation, see FFmpeg's SPS struct.) Picture parameter set (PPS), which applies on top of an SPS, and specifies configuration such as QP offsets. (For a concrete implementation, see FFmpeg's PPS struct.) The sequence and picture parameter-set mechanism decouples the transmission of infrequently changing information from the transmission of coded representations of the values of the samples in the video pictures. Each VCL NAL unit contains an identifier that refers to the content of the relevant picture parameter set and each picture parameter set contains an identifier that refers to the content of the relevant sequence parameter set. In this manner, a small amount of data (the identifier) can be used to refer to a larger amount of information (the parameter set) without repeating that information within each VCL NAL unit. Sequence and picture parameter sets can be sent well ahead of the VCL NAL units that they apply to, and can be repeated to provide robustness against data loss. In some applications, parameter sets may be sent within the channel that carries the VCL NAL units (termed "in-band" transmission). In other applications, it can be advantageous to convey the parameter sets "out-of-band" using a more reliable transport mechanism than the video channel itself. == Access Units == A set of NAL units in a specified form is referred to as an access unit. The decoding of each access unit results in one decoded picture. Each access unit contains a set of VCL NAL units that together compose a primary coded picture. It may also be prefixed with an access unit delimiter to aid in locating the start of the access unit. Some supplemental enhancement information containing data such as picture timing information may also precede the primary coded picture. The primary coded picture consists of a set of VCL NAL units consisting of slices or slice data partitions that represent the samples of the video picture. Following the primary coded picture may be some additional VCL NAL units that contain redundant representations of areas of the same video picture. These are referred to as redundant coded pictures, and are available for use by a decoder in recovering from loss or corruption of the data in the primary coded pictures. Decoders are not required to decode redundant coded pictures if they are present. Finally, if the coded picture is the last picture of a coded video sequence (a sequence of pictures that is independently decodable and uses only one sequence parameter set), an end of sequence NAL unit may be present to indicate the end of the sequence; and if the coded picture is the last coded picture in the entire NAL unit stream, an end of stream NAL unit may be present to
Read more →
Alipay

Alipay (simplified Chinese: 支付宝; traditional Chinese: 支付寶; pinyin: zhīfùbǎo) is a third-party mobile and online payment platform, established in Hangzhou, China, in February 2004 by Alibaba Group and its founder Jack Ma. In 2015, Alipay moved its headquarters to Pudong, Shanghai, although its parent company Ant Financial remains Hangzhou-based. Alipay overtook PayPal as the world's largest mobile (digital) payment platform in 2013. As of June 2020, Alipay serves over 1.3 billion users and 80 million merchants. According to the statistics of the fourth quarter of 2018, Alipay has a 55.32% share of the third-party payment market in mainland China, and it continues to grow. Along with WeChat, Alipay has been described to be China's super-app with a wide range of functionalities including ridesharing, travel booking and medical appointments. == History == The service was first launched in 2003, by Taobao. The People's Bank of China, China's central bank, issued licensing regulations in June 2010 for third-party payment providers. It also issued separate guidelines for foreign-funded payment institutions. Because of this, Alipay, which accounted for half of China's non-bank online payment market, was restructured as a domestic company controlled by Alibaba CEO Jack Ma in order to facilitate the regulatory approval for the license. The 2010 transfer of Alipay's ownership was controversial, with media reports in 2011 that Yahoo! and Softbank (Alibaba Group's controlling shareholders) were not informed of the sale for nominal value. Chinese business publication Century Weekly criticised Ma, who stated that Alibaba Group's board of directors was aware of the transaction. The incident was criticised in foreign and Chinese media as harming foreign trust in making Chinese investments. The ownership dispute was resolved by Alibaba Group, Yahoo!, and Softbank in July 2011. In 2013, Alipay launched a financial product platform called Yu'e Bao. Alipay partnered with Tianhong Asset Management to launch the it. Yu'e Bao offers an online money market account in which Alipay customers can deposit money and receive a higher interest rate than that available from banks. It soon became China's largest online money market fund and prompted competitors like Baidu and Tencent to introduce alternatives. Alibaba (the parent company of Alipay) reported having 152 million Yu'e Bao users in mid-2016, with 810 billion RMB (US$117 billion) in funds under management. In 2015, Alipay's parent company was re-branded as Ant Financial Services Group. In 2017, Alipay unveiled their facial recognition payment service. In 2020, Alipay upgraded from a payment financial instrument to an open platform for digital life. In 2021, the mandate by the Ministry of Industry and Information Technology (MIIT) to open up the "walled garden" ecosystems of the major tech companies has led to the introduction of interoperability of payment QR codes of Alipay and competing WeChat Pay and UnionPay's Cloud QuickPass platforms. In response to the increase in Alipay's payment volume due to use on Alibaba's e-commerce sites and others, Chinese regulators introduced new rules in 2020. The new rules focused on Alipay because the payment volume exploded due to its use on Alibaba's e-commerce sites and other platforms. By the second quarter in 2020, Alipay held 55.6% of China's third party mobile payment market. The People's Bank of China made rules that required payment firms to place money with regulators and anti-monopoly reviews would be triggered if the amount exceeded 50% market share. The rules included that the People's Bank of China mandate an online-payment clearing route through the NetsUnion Clearing Corporation, a centralized, state-overseen clearing body, and that unused consumer funds be held by a third-party payment provider in a non-interest-bearing account. These measures increased transparency and reduced systemic risk. When Alipay operates outside of China, it must comply with local financial regulations, which may treat specific functions such as money-market funds or investment-linked products. In Singapore, such services may require prior authorization from securities or financial-services regulators before they can be offered to residents. == Services == Alipay states that it operates with more than 65 financial institutions including Visa and MasterCard to provide payment services for Taobao and Tmall as well as more than 460,000 online and local Chinese businesses. Alipay is used in smartphones with their Alipay Wallet app. QR code payment codes are used for local in-store payments. The Alipay app also provides features such as credit card bill payments, bank account managements, P2P transfer, prepay mobile phone top-up, bus and train ticket purchases, food orders, vehicles for hire, insurance selections and a digital identification document storage. Alipay also allows online check-out on most Chinese-based websites such as Taobao and Tmall. The Alipay app allows users to add their own services provided from different companies to create a more personalised experience. Since late 2008, Alipay has promoted public service payment services and has covered more than 300 cities nationwide, supporting more than 1,200 partner organizations. In addition to utility bills such as water and electricity, Alipay also extends their services to areas such as paying transportation fines, property fees, and cable television fees. Common online payment services also include hydropower coal payment, tuition payment and traffic fine. On 15 January 2009, Alipay launched a credit card repayment service, supporting 39 domestic bank-issued credit cards. It is currently the most popular third-party repayment platform. The main advantages are free credit card bills checking, repayments with no administrative fee, as well as automatic repayment, repayment reminders and other value-added services. In the first quarter of 2014, 76% of credit cards were also paid by Alipay Wallet. From December 2013, several chain convenience store companies, including Meiyijia, Hongqi Chain, and Qishiduo C-STORE and 7-Eleven, have successively supported Alipay payment; in December, Beijing taxi drivers began to accept Alipay to pay the fare. Subsequently, Wanda Cinema, Joy City, Wangfujing and other large-scale retail companies as well as movie theaters, KTV, and catering companies have access to Alipay. From 26 March 2019, the service fee will be charged for the payment of credit card through Alipay. Customers only pay the portion of the payment that exceeds 2,000 yuan at 0.1%. In addition to this, in 2019, Walgreens accepted Alipay as payment in 3,000 US stores. Walgreen's products are available to Chinese customers through Alibaba's Tmall online marketplace. The payment application can also be used on Alibaba.com's site and Taobao as a means of payment. A Nielsen report suggests that over 90% of Chinese tourists would be willing to use mobile payment overseas if given the option. Many Chinese tourists do not have international credit cards, and so Alipay is a payment option. Digital payments have become the norm in China as the government pushes a cashless system even in rural and village areas. In November 2019, Alipay introduced Tourpass, a service component that allows non-Chinese users to use its mobile payment feature by pre-loading Chinese Yuan equivalent foreign currency into the app. In 2020, Alipay used a QR code system to help in containing the COVID-19 outbreak. The health code system tags users one of three colors according to their location, basic health information and travel history. "Beauty filters" were included to Alipay's face-scan payment system in a new upgrade that was released in July 2019. The market has responded well to the "beauty filters," which make users seem better when they use the program to make payments. Alipay Tap is a payment function launched by Alipay in July 2024. Alipay+ NFC enables wallets to offer tap-to-pay acceptance across Mastercard's global contactless network, all within your existing wallet infrastructure. == Foreign expansion == Outside of China, more than 300 worldwide merchants use Alipay to sell directly to consumers in China. It currently supports transactions in 18 foreign currencies. Since the launch of Alipay in the Mainland China, Ant Financial introduced a series of expansion of the services to other countries. Other than expanding into individual countries, the system would also be integrated with online payment platform providers. Ant Group had acquired a majority stake into 2C2P, a Singapore-based provider used by merchants worldwide in April 2022, and would eventually integrate Alipay with 2C2P. === Asia === ==== Bangladesh ==== In 2018, Alipay bought 20% shares in Bangladeshi mobile financial service provider bKash Limited. ==== Hong Kong ==== In 2017, Ant Financial expanded to Hong Kong. In a joint venture with CK Hutchison, as Alipay Payment Ser
Read more →
Reconstruction from projections

The problem of reconstructing a multidimensional signal from its projection is uniquely multidimensional, having no 1-D counterpart. It has applications that range from computer-aided tomography to geophysical signal processing. It is a problem which can be explored from several points of view—as a deconvolution problem, a modeling problem, an estimation problem, or an interpolation problem. == Motivation and applications == Many fields in science and engineering use reconstruction from projections, especially in imaging. It is widely applied geophysical tomography, medical imaging and industrial radiography. For example, in a CT scanner, the 3D structure of the patient’s body being scanned is measured with beams going through the tissue and hitting a detector, giving a flat projection of the body from that angle. Multiple projections are put together to get an image of the position and shape of structures inside in 3D. == Problem statement and basics == A projection is a linear mapping of an M {\displaystyle M} dimensional signal into an N {\displaystyle N} dimensional one, where N ≤ M {\displaystyle N\leq M} . And the objective of reconstruction is to restore the M {\displaystyle M} dimensional signal based on the N {\displaystyle N} dimensional signal. The following case is a 2-D signal projected into 1D signal. The signal in the original coordinate is denoted as d ( u , v ) {\displaystyle d(u,v)} . Now consider a collimated beam of radiation coming from the opposite orientation of v ^ {\displaystyle {\hat {v}}} , producing a projection along u ^ {\displaystyle {\hat {u}}} . v ^ {\displaystyle {\hat {v}}} and u ^ {\displaystyle {\hat {u}}} are normal to each other, and the angle between u {\displaystyle u} and u ^ {\displaystyle {\hat {u}}} is theta. The signal obtained along u ^ {\displaystyle {\hat {u}}} axis is defined to be p θ ( u ^ ) {\displaystyle p_{\theta }({\hat {u}})} . The relationship between the original coordinate and the rotated coordinate is given by [ u ^ v ^ ] = [ cos ⁡ θ sin ⁡ θ − sin ⁡ θ cos ⁡ θ ] [ u v ] {\displaystyle {\begin{bmatrix}{\hat {u}}\\{\hat {v}}\end{bmatrix}}={\begin{bmatrix}\cos \theta &\sin \theta \\-\sin \theta &\cos \theta \end{bmatrix}}{\begin{bmatrix}u\\v\end{bmatrix}}} or inversely, [ u v ] = [ cos ⁡ θ − sin ⁡ θ sin ⁡ θ cos ⁡ θ ] [ u ^ v ^ ] {\displaystyle {\begin{bmatrix}u\\v\end{bmatrix}}={\begin{bmatrix}\cos \theta &-\sin \theta \\\sin \theta &\cos \theta \end{bmatrix}}{\begin{bmatrix}{\hat {u}}\\{\hat {v}}\end{bmatrix}}} Then we have p θ ( u ^ ) = ∫ − ∞ ∞ d ( u , v ) d v ^ = ∫ − ∞ ∞ d ( u ^ cos ⁡ ( θ ) − v ^ sin ⁡ ( θ ) , u ^ sin ⁡ ( θ ) + v ^ cos ⁡ ( θ ) ) d v ^ {\displaystyle p_{\theta }({\hat {u}})=\int _{-\infty }^{\infty }d(u,v)\,\mathrm {d} {\hat {v}}=\int _{-\infty }^{\infty }d({\hat {u}}\cos(\theta )-{\hat {v}}\sin(\theta ),{\hat {u}}\sin(\theta )+{\hat {v}}\cos(\theta ))\,\mathrm {d} {\hat {v}}} By varying theta, a large number of projections can be obtained. Given the projection-slice theorem, D ( Ω , θ ) {\displaystyle D(\Omega ,\theta )} ,the slice of the Fourier transform of d ( u , v ) {\displaystyle d(u,v)} at angle theta, is equivalent to P θ ( Ω ) {\displaystyle P_{\theta }(\Omega )} , the Fourier Transform of the projection p θ ( u ^ ) {\displaystyle p_{\theta }({\hat {u}})} . Therefore, the unknown d ( u , v ) {\displaystyle d(u,v)} can be obtained from its Fourier transform by means of the Fourier transform inversion integral d ( u , v ) = 1 4 π 2 ∫ − ∞ ∞ ∫ − ∞ ∞ D ( Ω 1 , Ω 2 ) e j Ω 1 u e j Ω 2 v d Ω 1 , Ω 2 {\displaystyle \mathrm {d} (u,v)={\frac {1}{4\pi ^{2}}}\int _{-\infty }^{\infty }\int _{-\infty }^{\infty }D(\Omega _{1},\Omega _{2})e^{j\Omega _{1}u}e^{j\Omega _{2}v}\,\mathrm {d} \Omega _{1},\Omega _{2}} = 1 4 π 2 ∫ 0 ∞ ∫ − π π D ( Ω , θ ) e j Ω u cos ⁡ ( θ ) e j Ω v s i n θ | Ω | d Ω d θ {\displaystyle ={\frac {1}{4\pi ^{2}}}\int _{0}^{\infty }\int _{-\pi }^{\pi }D(\Omega ,\theta )e^{j\Omega u\cos(\theta )}e^{j\Omega vsin\theta }{\begin{vmatrix}\Omega \end{vmatrix}}\,\mathrm {d} \Omega \mathrm {d} \theta } = 1 4 π 2 ∫ − π π ∫ 0 ∞ P θ ( Ω ) e j Ω ( u cos ⁡ θ + v sin ⁡ θ ) | Ω | d Ω d θ {\displaystyle ={\frac {1}{4\pi ^{2}}}\int _{-\pi }^{\pi }\int _{0}^{\infty }P_{\theta }(\Omega )e^{j}\Omega (u\cos \theta +v\sin \theta ){\begin{vmatrix}\Omega \end{vmatrix}}\,\mathrm {d} \Omega \mathrm {d} \theta } = 1 4 π 2 ∫ 0 π ( ∫ − ∞ ∞ P θ ( Ω ) | Ω | {\displaystyle ={\frac {1}{4\pi ^{2}}}\int _{0}^{\pi }(\int _{-\infty }^{\infty }P_{\theta }(\Omega ){\begin{vmatrix}\Omega \end{vmatrix}}} e j Ω u ^ d Ω ) d θ {\displaystyle e^{j\Omega {\hat {u}}}\mathrm {d} \Omega )\mathrm {d} \theta } By taking the inverse Fourier Transform and assuming g ( u ^ ) = F − 1 ( | Ω | 2 ) {\displaystyle g({\hat {u}})={\mathcal {F}}^{-1}({{\begin{vmatrix}\Omega \end{vmatrix}}^{2}})} , we get d ( u , v ) = ∑ i △ θ i [ p θ ( u ^ ) ∗ g θ i ( u ^ ) ] {\displaystyle d(u,v)=\sum _{i}\vartriangle \theta _{i}[p_{\theta }({\hat {u}})g_{\theta i}({\hat {u}})]} == Approaches == In practice, there are a wide variety of methods that are utilized, most of which are reconstruct 3-D information (volume) from 2-D signals (image). Typically used methods are CT, MRI, PET and SPECT. And the filtered back projection based on the principles introduced above are commonly applied. === Computed Tomography (CT) === In CT, a volume is formed by stacking the axial slices. The software cuts the volume in a different plane (usually orthogonal). Commonly, slice data is generated using an X-ray source that rotates around the object. X-ray sensors are positioned on the opposite side of the circle from the X-ray source. === Magnetic resonance imaging (MRI) === In MRI, energy from an oscillating magnetic field is temporarily applied to the patient at the appropriate resonance frequency. The protons (hydrogen atoms) emit a radio frequency signal which is measured by a receiving coil. The radio signal can be made to encode position information by varying the main magnetic field using gradient coils. === Positron emission tomography (PET) === The system detects pairs of gamma rays emitted indirectly by a positron-emitting radionuclide (tracer), which is introduced into the body on a biologically active molecule. Three-dimensional images of tracer concentration within the body are then constructed by computer analysis. In modern PET-CT scanners, three dimensional imaging is often accomplished with the aid of a CT X-ray scan performed on the patient during the same session, in the same machine. === Single-photon emission computed tomography (SPECT) === SPECT imaging is performed by using a gamma camera to acquire multiple 2-D images (projections) from multiple angles. Multiple projections are used to yield a 3-D data set. This data set may then be manipulated to show thin slices along any chosen axis of the body. SPECT is similar to PET in its use of radioactive tracer material and detection of gamma rays, while the tracers used in SPECT emit gamma radiation that is measured more directly.
Read more →
AI Overviews

AI Overviews is an artificial intelligence (AI) feature integrated into Google Search that produces AI-generated summaries of search results. The feature has been criticized for its inaccuracy and for reducing website traffic. == History and development == AI Overviews were first introduced as part of Google's Search Generative Experience (SGE), which was unveiled at the Google I/O conference in May 2023. In May 2024 at Google I/O 2024, the feature was rebranded as AI Overviews and launched in the United States. The introduction of AI Overviews was seen as a strategic move to compete with other generative AI advancements, including OpenAI's ChatGPT. By August 2024, AI Overviews was rolled out to several other countries, including the United Kingdom, India, Japan, Brazil, Mexico, and Indonesia, with support for multiple languages. In October 2024, Google expanded the feature globally, making it available in over 100 countries. In December 2024, Botify x Demandsphere released findings stating that when AI Overviews and featured snippets appear together on the search engine results page, they take up approximately 67.1% of the screen on desktop and 75.7% on mobile. Even if content is ranking in the #1 position, it may not be visible to consumers if other visual elements on the results page are more prominent. In March 2025, Google started testing an "AI Mode", where the search results page is AI-generated. The company was also considering adding advertisements to the AI Mode, as they already exist in AI Overviews. As of May 2025, AI Overviews are available in over 200 countries and territories and in more than 40 languages. As of March 2026, Google AI Overviews appear on more than 48% of total Google Search queries, compared to just 6.49% in the previous year (58% year-over-year growth). == Functionality == The AI Overviews feature uses large language models to generate summaries from web content. The overviews are designed to be concise, providing a snapshot of relevant information about the queried topic. Google allows users to adjust the language complexity in summaries, offering both simplified and detailed options. The overviews also include links to sources. According to a June 2025 study by Semrush, the most cited source is Quora, followed by Reddit. == Reception == The feature has faced criticism for inaccuracies, including instances where erroneous or nonsensical content was generated. Depending on what is searched for, the overview may also consist of hallucinated content, such as when searching for idioms that do not exist. In May 2024, Google temporarily restricted the AI tool after it provided suggestions that were seen as nonsensical and harmful, such as telling users to eat rocks or apply glue on pizza. Concerns were also raised by content publishers, who feared a decline in web traffic as users relied on the summaries instead of visiting source websites. A Google patent from 2026 raised the concern of webmasters that Google could entirely replace the landing page of websites by an AI optimized copy of the website in its results. There is also apprehension about the ethical implications of AI-driven content aggregation, including its impact on intellectual property rights and the visibility of smaller content providers. The European Commission announced in December 2025 that they were investigating whether AI Overviews breached European competition law. In response, Google has stated its commitment to improve content validation and refine the algorithms used to filter unreliable information. Google implemented measures to prioritize link placement within AI Overviews, aiming to balance user convenience with the needs of content creators. In January 2026, Google restricted AI Overviews on certain health-related searches following an investigation by The Guardian. == Lawsuits == On February 24, 2025, Chegg sued Alphabet over the AI Overviews feature, claiming that it was leading to students preferring "low-quality, unverified AI summaries", thus violating antitrust law. Chegg also said it was considering either a sale or a take-private transaction. In September 2025, Penske Media Corporation, the publisher of Rolling Stone and The Hollywood Reporter, sued Google, claiming that AI Overviews illegally regurgitate content from their websites and drive off potential site visitors by always appearing on top of the search results while leaving little incentive to see the linked sources. The company stated that "the future of digital media and [...] its integrity [...] is threatened by Google's current actions", alleging that 20% of searches that link to Penske-owned websites show AI Overviews and that the figure is expected to rise. Google spokesperson José Castañeda called the claims "meritless" and stated that "AI Overviews send traffic to a greater diversity of sites." In 2026, Canadian musician Ashley MacIsaac filed a lawsuit against Google claiming that the AI Overview feature had wrongly stated that MacIsaac had been convicted of numerous criminal offences and was on the sex offender registry. He claims this incorrect information led to the cancellation of a December 2025 gig organized by the Sipekne'katik First Nation.
Read more →
Clip Studio Paint

Clip Studio Paint (previously marketed as Manga Studio in North America), informally known in Japan as Kurisuta (クリスタ), is a family of software applications developed by Japanese graphics software company Celsys. It is used for the digital creation of comics, general illustration, and 2D animation. The software is available in versions for macOS, Windows, iOS, iPadOS, Android, and ChromeOS. The program is widely used by amateur and professional comics creators, and animation studios. The application is sold in editions with varying feature sets. The full-featured edition is a page-based, layered drawing program, with support for bitmap and vector art, text, imported 3D models, and frame-by-frame animation. It is designed for use with a stylus and a graphics tablet or tablet computer. It has drawing tools which emulate natural media such as pencils, ink pens, and brushes, as well as patterns and decorations. It is distinguished from similar programs by features designed for creating comics: tools for creating panel layouts, perspective rulers, sketching, inking, applying tones and textures, coloring, and creating word balloons and captions. == History == The application has it origins in a program for macOS and Windows, released in Japan in 2001 as "Comic Studio". It was sold as "Manga Studio" in the Western market by E Frontier America until 2007, then by Smith Micro Software. Early versions were designed for creating black and white art with only spot color (a typical format for Japanese manga), with version 4 adding support for full-color art. Celsys developed Clip Studio Paint as a replacement for this product, based on the company's Illust Studio application, and it was released on May 31, 2012. It was initially distributed in Western markets as "Manga Studio 5", but in 2016, the branding was unified worldwide as "Clip Studio Paint". At this time, version 1.5.4 introduced a new file format (extension .clip) and frame-by-frame animation. In late 2017, Celsys took over direct support for the software worldwide, and ceased its relationship with Smith Micro. In July 2018, Celsys began a partnership with Graphixly for distribution in North America, South America, and Europe. Clip Studio Paint for the Apple iPad was introduced in November 2017, and for the iPhone in December 2019. Clip Studio Paint for Samsung Galaxy tablets and smartphones was released in August 2020 on the Galaxy Store, with versions for other Android devices and Chromebooks released in December. The Windows and macOS versions of the software have been sold and distributed either from the developer's web site or on DVD, and purchased either with a perpetual license or an ongoing subscription. The versions for iPhone, iPad, and Android-based devices are distributed through the corresponding app stores free of charge, but require a subscription – which includes cloud storage – for unrestricted use. Without a subscription, the tablet versions can be used only for a specified number of months, and the phone versions can be used only for 30 hours per month. From 2013 to 2023, regular updates for version 1 were distributed free of additional charge to both perpetual and subscription users. Since the release of version 2 in 2023, feature updates are included only in subscription plans and are available to perpetual licenses at an additional cost. Perpetual licenses can be upgraded permanently or with an annual "update pass". The "update pass" provides early access to features to be included in subsequent perpetual licenses for 12 months, after which the software reverts to the original license if not renewed. In March 2024, version 3 was released, and version 4 introduced additional features in March 2025. == Editions == Clip Studio Paint is available in three editions, with differing feature sets and prices: Debut (bundle-only grade), Pro (adding support for vector-based drawing, custom textures, and comics-focused features), and EX (adding support for multi-page documents, book exporting, and 2D animation). Companion programs include Clip Studio (for managing and sharing digital assets distributed through the Clip Studio web site, managing licenses, and getting updates and support) and Clip Studio Modeler (for setting up 3D materials to use in Clip Studio Paint).
Read more →
Morphological antialiasing

Morphological antialiasing (MLAA) is a spatial anti-aliasing technique used in real-time computer graphics. It reduces artifacts, such as jaggies, when representing a high-resolution image at a lower resolution. MLAA is a post-process filtering which detects borders in the resulting image and then finds specific patterns in these. Anti-aliasing is achieved by blending pixels in these borders, according to the pattern they belong to and their position within the pattern. Introduced in 2009, MLAA was an early and influential example of anti-aliasing techniques done in post-processing, which makes them suitable for deferred shading. A similar method in this class is fast approximate anti-aliasing (FXAA). Temporal anti-aliasing, also a post-process, has become the most common anti-aliasing method for real-time rendering and video games. Enhanced subpixel morphological antialiasing, or SMAA, is an image-based GPU-based implementation of MLAA developed by Universidad de Zaragoza and Crytek.
Read more →