AI Email Response

AI Email Response — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Polynomial texture mapping

Polynomial texture mapping (PTM), also known as Reflectance Transformation Imaging (RTI), is a technique of imaging and interactively displaying objects under varying lighting conditions to reveal surface phenomena. The data acquisition method is single camera multi light (SCML). == Origins == The method was originally developed by Tom Malzbender of HP Labs in order to generate enhanced 3D computer graphics and it has since been adopted for cultural heritage applications. == Methodology == A series of images is captured in a darkened environment with the camera in a fixed position and the object lit from different angles (Single Camera Multi Light). Interactive software processes and combines the set of images to enable the user inspecting the object to control a virtual light source. The virtual light source may be manipulated to simulate light from different angles and of different intensity or wavelengths to illuminate the surface of artefacts and reveal details. Open-source tools for processing the captured images and publishing the resulting relightable images on the web are freely available. == Applications == Polynomial texture mapping may be used for detailed recording and documentation, 3D modeling, edge detection, and to aid the study of inscriptions, rock art and other artefacts. It has been applied to hundreds of the Vindolanda tablets by the Centre for the Study of Ancient Documents at the University of Oxford in conjunction with the British Museum. It has also been deployed, by Ben Altshuler of the Institute for Digital Archaeology, to scan the Philae obelisk at Kingston Lacy and the Parian Chronicle at the Ashmolean Museum; in both cases scans revealed significant, previously illegible text. Method was also used for identifying microscopic worked antler from Star Carr and recording ancient rock art in Armenia. A 'dome' supporting twenty-four lights has been used to image paintings in the National Gallery and produce polynomial texture maps, providing information on condition phenomena for conservation purposes. Studies of the technique at the National Gallery and Tate concluded that it is an effective tool for documenting changes in the condition of paintings, more easily repeatable than raking light photography, and therefore could be used to assess paintings during structural treatment and before and after loan. Twelve dome-based systems built by the University of Southampton have been used to capture thousands of cuneiform tablets at various museums. The technique is now also finding uses in the field of forensic science, for example in imaging footprints, tyre marks, and indented writing.
Read more →
Macromedia FreeHand

Macromedia FreeHand (formerly Aldus FreeHand) is a discontinued computer application for creating two-dimensional vector graphics oriented primarily to professional illustration, desktop publishing and content creation for the Web. FreeHand was similar in scope, intended market, and functionality to Adobe Illustrator, CorelDRAW and Xara Designer Pro. Because of FreeHand's dedicated page layout and text control features, it also compares to Adobe InDesign and QuarkXPress. Professions using FreeHand include graphic design, illustration, cartography, fashion and textile design, product design, architects, scientific research, and multimedia production. FreeHand was created by Altsys Corporation in 1988 and licensed to Aldus Corporation, which released versions 1 through 4. In 1994, Aldus merged with Adobe Systems and because of the overlapping market with Adobe Illustrator, FreeHand was returned to Altsys by order of the Federal Trade Commission. Altsys was later bought by Macromedia, which released FreeHand versions 5 through 11 (FreeHand MX). In 2005, Adobe Systems acquired Macromedia and its product line which included FreeHand MX, under whose ownership it presently resides. Since 2003, FreeHand development has been discontinued; in the Adobe Systems catalog, FreeHand has been replaced by Adobe Illustrator. FreeHand MX continues to run under Windows 11 and under Mac OS X 10.6 (Snow Leopard) within Rosetta, a PowerPC code emulator, and requires a registration patch supplied by Adobe. FreeHand 10 runs without problems on Mac OS X Snow Leopard with Rosetta enabled, and does not require a registration patch. Later versions of macOS can use a Mac OS X Snow Leopard Server virtual machine to emulate the required PowerPC support. == History == === Altsys and Aldus FreeHand === In 1984, James R. Von Ehr founded Altsys Corporation to develop graphics applications for personal computers. Based in Plano, Texas, the company initially produced font editing and conversion software; Fontastic Plus, Metamorphosis, and the Art Importer. Their premier PostScript font-design package, Fontographer, was released in 1986 and was the first such program on the market. With the PostScript background having been established by Fontographer, Altsys also developed FreeHand (originally called Masterpiece) as a Macintosh Postscript-based illustration program that used Bézier curves for drawing and was similar to Adobe Illustrator. FreeHand was announced as "... a Macintosh graphics program described as having all the features of Adobe's Illustrator plus drawing tools such as those in Mac Paint and Mac Draft and special effects similar to those in Cricket Draw." Seattle's Aldus Corporation acquired a licensing agreement with Altsys Corporation to release FreeHand along with their flagship product, Pagemaker, and Aldus FreeHand 1.0 was released in 1988. FreeHand's product name used intercaps; the F and H were capitalized. The partnership between the two companies continued with Altsys developing FreeHand and with Aldus controlling marketing and sales. After 1988, a competitive exchange between Aldus FreeHand and Adobe Illustrator ensued on the Macintosh platform with each software advancing new tools, achieving better speed, and matching significant features. Windows PC development also allowed Illustrator 2 (aka, Illustrator 88 on the Mac) and FreeHand 3 to release Windows versions to the graphics market. FreeHand 1.0 sold for $495 in 1988. It included the standard drawing tools and features as other draw programs including special effects in fills and screens, text manipulation tools, and full support for CMYK color printing. It was also possible to create and insert PostScript routines anywhere within the program. FreeHand performed in preview mode instead of keyline mode but performance was slower. FreeHand 2.0 sold for $495 in 1989. Besides improving on the features of FreeHand 1.0, FreeHand 2 added faster operation, Pantone colors, stroked text, flexible fill patterns and automatically import graphic assets from other programs. It added accurate control over a color monitor screen display, limited only by its resolution. FreeHand 3.0 sold for $595 in 1991. New features included resizable color, style, and layer panels including an Attributes menu. Also tighter precision of both the existing tools and aligning of objects. FH3 created compound Paths. Text could be converted to paths, applied to an ellipse, or made vertical. Carried over from version 1.0, FreeHand 3 suffered by having text entered into a dialog box instead of directly to the page. In October 1991, a 3.1 upgrade made FreeHand work with System 7 but additionally, it supported pressure-sensitive drawing which offered varying line widths with a users stroke. It improved element manipulation and added more import/export options. FreeHand 4.0 sold for $595 in 1994. Altsys ported FreeHand 3.0 to the NeXT system creating a new program named Virtuoso. Virtuoso continued its development at Altsys and version 2.0 of Virtuoso was feature-equivalent to FreeHand 4 (with the addition of NeXT-specific features such as Services and Display PostScript) and file compatible, with Virtuoso 2 able to open FreeHand 4 files and vice versa. A prominent feature of this version was the ability to type directly into the page and wrap inside or outside any shape. It also included drag-and-drop color imaging, a larger pasteboard, and a user interface that featured floating, rollup panels. The colors palette included a color mixer for adding new colors to the swatch list. Speed increases were made. In the same year of FreeHand 4 release, Adobe Systems announced merger plans with Aldus Corporation for $525 million. Fear about the end of competition between these two leading applications was reported in the media and expressed by customers (Illustrator versus FreeHand and Adobe Photoshop versus Aldus PhotoStyler.) Because of this overlapping of the market, Altsys stepped in by suing Aldus, saying that the merger deal was "a prima facie violation of a non-compete clause within the FreeHand licensing agreement." Altsys CEO Jim Von Ehr explained, "No one loves FreeHand more than we do. We will do whatever it takes to see it survive." The Federal Trade Commission issued a complaint against Adobe Systems on October 18, 1994, ordering a divestiture of FreeHand to "remedy the lessening of competition resulting from the acquisition as alleged in the Commission's complaint," and further, the FTC ordering, "That for a period of ten (10) years from the date on which this order becomes final, respondents shall not, without the prior approval of the Commission, directly or indirectly, through subsidiaries, partnerships, or otherwise .. Acquire any Professional Illustration Software or acquire or enter into any exclusive license to Professional Illustration Software;" (referring to FreeHand.) FreeHand was returned to Altsys with all licensing and marketing rights as well as Aldus FreeHand's customer list. === Macromedia Freehand === By late 1994, Altsys still retained all rights to FreeHand. Despite brief plans to keep it in-house to sell it along with Fontographer and Virtuoso, Altsys reached an agreement with the multimedia software company, Macromedia, to be acquired. This mutual agreement provided FreeHand and Fontographer a new home with ample resources for marketing, sales, and competition against the newly merged Adobe-Aldus company. Altsys would remain in Richardson, Texas, but would be renamed as the Digital Arts Group of Macromedia and was responsible for the continued development of FreeHand. Macromedia received FreeHand's 200,000 customers and expanded its traditional product line of multimedia graphics software to illustration and design graphics software. CEO James Von Ehr became a Macromedia vice-president until 1997 when he left to start another venture. FreeHand 5.0 sold for $595 in 1995. This version featured a more customizable and expanded workspace, multiple views, stronger design and editing tools, a report generator, spell check, paragraph styles, multicolor gradient fills up to 64 colors, speed improvements, and it accepted Illustrator plugins. In September 1995, a 5.5 upgrade added Photoshop plug-in support, PDF import capabilities, the Extract feature, inline graphics to text, improved auto-expanding text containers, the Crop feature, and the Create PICT Image feature. A FreeHand 5.5 upgrade was part of the FreeHand Graphics Studio (a suite that included Fontographer, Macromedia xRes image editing application, and Extreme 3D animation and modeling application). FreeHand 6.0 in 1996. This version only existed in beta. Some Freehand 7 prerelease versions were released under the Freehand 6 tag. FreeHand 7.0 sold for $399 in 1996, or $449 as part of the FreeHand Graphics Studio (see above.) Features included a redesigned user interface that allowed recombining Inspectors, Panel Tabs, Dockable Panels, Smart Cursors,
Read more →
Distribution management system

A distribution management system (DMS) is a collection of applications designed to monitor and control the electric power distribution networks efficiently and reliably. It acts as a decision support system to assist the control room and field operating personnel with the monitoring and control of the electric distribution system. Improving the reliability and quality of service in terms of reducing power outages, minimizing outage time, maintaining acceptable frequency and voltage levels are the key deliverables of a DMS. Given the complexity of distribution grids, such systems may involve communication and coordination across multiple components. For example, the control of active loads may require a complex chain of communication through different components as described in US patent 11747849B2 In recent years, utilization of electrical energy increased exponentially and customer requirement and quality definitions of power were changed enormously. As electric energy became an essential part of daily life, its optimal usage and reliability became important. Real-time network view and dynamic decisions have become instrumental for optimizing resources and managing demands, leading to the need for distribution management systems in large-scale electrical networks. == Overview == Most distribution utilities have been comprehensively using IT solutions through their Outage Management System (OMS) that makes use of other systems like Customer Information System (CIS), Geographical Information System (GIS) and Interactive Voice Response System (IVRS). An outage management system has a network component/connectivity model of the distribution system. By combining the locations of outage calls from customers with knowledge of the locations of the protection devices (such as circuit breakers) on the network, a rule engine is used to predict the locations of outages. Based on this, restoration activities are charted out and the crew is dispatched for the same. In parallel with this, distribution utilities began to roll out Supervisory Control and Data Acquisition (SCADA) systems, initially only at their higher voltage substations. Over time, use of SCADA has progressively extended downwards to sites at lower voltage levels. DMSs access real-time data and provide all information on a single console at the control centre in an integrated manner. Their development varied across different geographic territories. In the US, for example, DMSs typically grew by taking Outage Management Systems to the next level, automating the complete sequences and providing an end to end, integrated view of the entire distribution spectrum. In the UK, by contrast, the much denser and more meshed network topologies, combined with stronger Health & Safety regulation, had led to early centralisation of high-voltage switching operations, initially using paper records and schematic diagrams printed onto large wallboards which were 'dressed' with magnetic symbols to show the current running states. There, DMSs grew initially from SCADA systems as these were expanded to allow these centralised control and safety management procedures to be managed electronically. These DMSs required even more detailed component/connectivity models and schematics than those needed by early OMSs as every possible isolation and earthing point on the networks had to be included. In territories such as the UK, therefore, the network component/connectivity models were usually developed in the DMS first, whereas in the USA these were generally built in the GIS. The typical data flow in a DMS has the SCADA system, the Information Storage & Retrieval (ISR) system, Communication (COM) Servers, Front-End Processors (FEPs) & Field Remote Terminal Units (FRTUs). == Why DMS? == Reduce the duration of outages Improve the speed and accuracy of outage predictions. Reduce crew patrol and drive times through improved outage locating. Improve the operational efficiency Determine the crew resources necessary to achieve restoration objectives. Effectively utilize resources between operating regions. Determine when best to schedule mutual aid crews. Increased customer satisfaction A DMS incorporates IVR and other mobile technologies, through which there is an improved outage communications for customer calls. Provide customers with more accurate estimated restoration times. Improve service reliability by tracking all customers affected by an outage, determining electrical configurations of every device on every feeder, and compiling details about each restoration process. == DMS Functions == In order to support proper decision making and O&M activities, DMS solutions should support the following functions: Network visualization & support tools Applications for Analytical & Remedial Action Utility Planning Tools System Protection Schemes The various sub functions of the same, carried out by the DMS are listed below:- === Network Connectivity Analysis (NCA) === Distribution network usually covers over a large area and catering power to different customers at different voltage levels. So locating required sources and loads on a larger GIS/Operator interface is often very difficult. Panning & zooming provided with normal SCADA system GUI does not cover the exact operational requirement. Network connectivity analysis is an operator specific functionality which helps the operator to identify or locate the preferred network or component very easily. NCA does the required analyses and provides display of the feed point of various network loads. Based on the status of all the switching devices such as circuit breaker (CB), Ring Main Unit (RMU) and/or isolators that affect the topology of the network modeled, the prevailing network topology is determined. The NCA further assists the operator to know operating state of the distribution network indicating radial mode, loops and parallels in the network. === Switching Schedule & Safety Management === In territories such as the UK a core function of a DMS has always been to support safe switching and work on the networks. Control engineers prepare switching schedules to isolate and make safe a section of network before work is carried out, and the DMS validates these schedules using its network model. Switching schedules can combine telecontrolled and manual (on-site) switching operations. When the required section has been made safe, the DMS allows a Permit To Work (PTW) document to be issued. After its cancellation when the work has been finished, the switching schedule then facilitates restoration of the normal running arrangements. Switching components can also be tagged to reflect any Operational Restrictions that are in force. The network component/connectivity model, and associated diagrams, must always be kept absolutely up to date. The switching schedule facility therefore also allows 'patches' to the network model to be applied to the live version at the appropriate stage(s) of the jobs. The term 'patch' is derived from the method previously used to maintain the wallboard diagrams. === State Estimation (SE) === The state estimator is an integral part of the overall monitoring and control systems for transmission networks. It is mainly aimed at providing a reliable estimate of the system voltages. This information from the state estimator flows to control centers and database servers across the network. The variables of interest are indicative of parameters like margins to operating limits, health of equipment and required operator action. State estimators allow the calculation of these variables of interest with high confidence despite the facts that the measurements may be corrupted by noise, or could be missing or inaccurate. Even though we may not be able to directly observe the state, it can be inferred from a scan of measurements which are assumed to be synchronized. The algorithms need to allow for the fact that presence of noise might skew the measurements. In a typical power system, the State is quasi-static. The time constants are sufficiently fast so that system dynamics decay away quickly (with respect to measurement frequency). The system appears to be progressing through a sequence of static states that are driven by various parameters like changes in load profile. The inputs of the state estimator can be given to various applications like Load Flow Analysis, Contingency Analysis, and other applications. === Load Flow Applications (LFA) === Load flow study is an important tool involving numerical analysis applied to a power system. The load flow study usually uses simplified notations like a single-line diagram and focuses on various forms of AC power rather than voltage and current. It analyzes the power systems in normal steady-state operation. The goal of a power flow study is to obtain complete voltage angle and magnitude information for each bus in a power system for specified load and generator real power and voltage conditions. Once this
Read more →
Non-local means

Non-local means is an algorithm in image processing for image denoising. Unlike "local mean" filters, which take the mean value of a group of pixels surrounding a target pixel to smooth the image, non-local means filtering takes a mean of all pixels in the image, weighted by how similar these pixels are to the target pixel. This results in much greater post-filtering clarity, and less loss of detail in the image compared with local mean algorithms. If compared with other well-known denoising techniques, non-local means adds "method noise" (i.e. error in the denoising process) which looks more like white noise, which is desirable because it is typically less disturbing in the denoised product. Recently non-local means has been extended to other image processing applications such as deinterlacing, view interpolation, and depth maps regularization. == Definition == Suppose Ω {\displaystyle \Omega } is the area of an image, and p {\displaystyle p} and q {\displaystyle q} are two points within the image. Then, the algorithm is: u ( p ) = 1 C ( p ) ∫ Ω v ( q ) f ( p , q ) d q . {\displaystyle u(p)={1 \over C(p)}\int _{\Omega }v(q)f(p,q)\,\mathrm {d} q.} where u ( p ) {\displaystyle u(p)} is the filtered value of the image at point p {\displaystyle p} , v ( q ) {\displaystyle v(q)} is the unfiltered value of the image at point q {\displaystyle q} , f ( p , q ) {\displaystyle f(p,q)} is the weighting function, and the integral is evaluated ∀ q ∈ Ω {\displaystyle \forall q\in \Omega } . C ( p ) {\displaystyle C(p)} is a normalizing factor, given by C ( p ) = ∫ Ω f ( p , q ) d q . {\displaystyle C(p)=\int _{\Omega }f(p,q)\,\mathrm {d} q.} == Common weighting functions == The purpose of the weighting function, f ( p , q ) {\displaystyle f(p,q)} , is to determine how closely related the image at the point p {\displaystyle p} is to the image at the point q {\displaystyle q} . It can take many forms. === Gaussian === The Gaussian weighting function sets up a normal distribution with a mean, μ = B ( p ) {\displaystyle \mu =B(p)} and a variable standard deviation: f ( p , q ) = e − | B ( q ) − B ( p ) | 2 h 2 {\displaystyle f(p,q)=e^{-{{\left\vert B(q)-B(p)\right\vert ^{2}} \over h^{2}}}} where h {\displaystyle h} is the filtering parameter (i.e., standard deviation) and B ( p ) {\displaystyle B(p)} is the local mean value of the image point values surrounding p {\displaystyle p} . == Discrete algorithm == For an image, Ω {\displaystyle \Omega } , with discrete pixels, a discrete algorithm is required. u ( p ) = 1 C ( p ) ∑ q ∈ Ω v ( q ) f ( p , q ) {\displaystyle u(p)={1 \over C(p)}\sum _{q\in \Omega }v(q)f(p,q)} where, once again, v ( q ) {\displaystyle v(q)} is the unfiltered value of the image at point q {\displaystyle q} . C ( p ) {\displaystyle C(p)} is given by: C ( p ) = ∑ q ∈ Ω f ( p , q ) {\displaystyle C(p)=\sum _{q\in \Omega }f(p,q)} Then, for a Gaussian weighting function, f ( p , q ) = e − | B ( q ) 2 − B ( p ) 2 | h 2 {\displaystyle f(p,q)=e^{-{{\left\vert B(q)^{2}-B(p)^{2}\right\vert } \over h^{2}}}} where B ( p ) {\displaystyle B(p)} is given by: B ( p ) = 1 | R ( p ) | ∑ i ∈ R ( p ) v ( i ) {\displaystyle B(p)={1 \over |R(p)|}\sum _{i\in R(p)}v(i)} where R ( p ) ⊆ Ω {\displaystyle R(p)\subseteq \Omega } and is a square region of pixels surrounding p {\displaystyle p} and | R ( p ) | {\displaystyle |R(p)|} is the number of pixels in the region R {\displaystyle R} . == Efficient implementation == The computational complexity of the non-local means algorithm is quadratic in the number of pixels in the image, making it particularly expensive to apply directly. Several techniques were proposed to speed up execution. One simple variant consists of restricting the computation of the mean for each pixel to a search window centred on the pixel itself, instead of the whole image. Another approximation uses summed-area tables and fast Fourier transform to calculate the similarity window between two pixels, speeding up the algorithm by a factor of 50 while preserving comparable quality of the result.
Read more →
YaDICs

YaDICs is a program written to perform digital image correlation on 2D and 3D tomographic images. The program was designed to be both modular, by its plugin strategy and efficient, by it multithreading strategy. It incorporates different transformations (Global, Elastic, Local), optimizing strategy (Gauss-Newton, Steepest descent), Global and/or local shape functions (Rigid-body motions, homogeneous dilatations, flexural and Brazilian test models)... == Theoretical background == === Context === In solid mechanics, digital image correlation is a tool that allows to identify the displacement field to register a reference image (called herein fixed image) to images during an experiment (mobile image). For example, it is possible to observe the face of a specimen with a painted speckle on it in order to determine its displacement fields during a tensile test. Before the appearance of such methods, researchers usually used strain gauges to measure the mechanical state of the material but strain gauges only measure the strain on a point and don't allow to understand material with an heterogeneous behavior. One can obtain a full in plane strain tensor by derivation of the displacement fields. Many methods are based upon the optical flow. In fluid mechanics a similar method is used, called Particle Image Velocimetry (PIV); the algorithms are similar to those of DIC but it is impossible to ensure that the optical flow is conserved so a vast majority of the software used the normalized cross correlation metric. In mechanics the displacement or velocity fields are the only concern, registering images is just a side effect. There is another process called image registration using the same algorithms (on monomodal images) but where the goal is to register images and thereby identifying the displacement field is just a side effect. YaDICs uses the general principle of image registration with a particular attention to the displacement fields basis. === Image registration principle === YaDICs can be explained using the classical image registration framework: === Image registration general scheme === The common idea of image registration and digital image correlation is to find the transformation between a fixed image and a moving one for a given metric using an optimization scheme. While there are many methods to achieve such a goal, Yadics focuses on registering images with the same modality. The idea behind the creation of this software is to be able to process data that comes from a μ-tomograph; i.e.: data cube over 10003 voxels. With such a size it is not possible to use naive approach usually used in a two-dimensional context. In order to get sufficient performances OpenMP parallelism is used and data are not globally stored in memory. As an extensive description of the different algorithms is given in. === Sampling === Contrary to image registration, Digital Image Correlation targets the transformation, one wants to extracted the most accurate transformation from the two images and not just match the images. Yadics uses the whole image as a sampling grid: it is thus a total sampling. === Interpolator === It is possible to choose between bilinear interpolation and bicubic interpolation for the grey level evaluation at non integer coordinates. The bi-cubic interpolation is the recommended one. === Metrics === ==== Sum of squared differences (SSD) ==== The SSD is also known as mean squared error. The equation below defines the SSD metric: S S D ( μ , I F , I M ) = 1 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) 2 , {\displaystyle SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {1}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)^{2},} where I F {\displaystyle {\mathcal {I_{F}}}} is the fixed image, I M {\displaystyle {\mathcal {I_{M}}}} the moving one, Ω F {\displaystyle \Omega _{F}} the integration area | Ω F | {\displaystyle \left|\Omega _{F}\right|} the number of pi(vo)xels (cardinal) and T μ {\displaystyle {T}_{\mu }} the transformation parametrized by μ The transformation can be written as: T μ ( x ) = x + { Φ ( x ) } t { μ } . {\displaystyle T_{\mu }(x)=x+\left\{\Phi (x)\right\}^{t}\left\{\mu \right\}.} This metric is the main one used in the YaDICs as it works well with same modality images. One has to find the minimum of this metric ==== Normalized cross-correlation ==== The normalized cross-correlation (NCC) is used when one cannot assure the optical flow conservation; it happens in case of change of lighting or if particles disappear from the scene can occur in particle images velocimetry (PIV). The NCC is defined by: N C C ( μ , I F , I M ) = ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) ( I M ( T μ ( x i ) ) − I M ¯ ) ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) 2 ∑ x i ∈ Ω F ( I M ( T μ ( x i ) ) − I M ¯ ) 2 , {\displaystyle NCC(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)}{\sqrt {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)^{2}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)^{2}}}},} where I F ¯ {\displaystyle {\overline {\mathcal {I_{F}}}}} and I M ¯ {\displaystyle {\overline {\mathcal {I_{M}}}}} are the mean values of the fixed and mobile images. This metric is only used to find local translation in Yadics. This metric with translation transform can be solved using cross-correlation methods, which are non iterative and can be accelerated using Fast Fourier Transform . === Classification of transformations === There are three categories of parametrization: elastic, global and local transformation. The elastic transformations respect the partition of unity, there are no holes created or surfaces counted several times. This is commonly used in Image Registration by the use of B-Spline functions and in solid mechanics with finite element basis. The global transformations are defined on the whole picture using rigid body or affine transformation (which is equivalent to homogeneous strain transformation). More complex transformations can be defined such as mechanically based one. These transformations have been used for stress intensity factor identification by and for rod strain by. The local transformation can be considered as the same global transformation defined on several Zone Of Interest (ZOI) of the fixed image. ==== Global ==== Several global transforms have been implemented: Rigid and homogeneous (Tx,Ty,Rz in 2D; Tx,Ty,Tz,Rx,Ry,Rz,Exx,Eyy,Ezz,Eyz,Exz,Exy in 3D) Brazilian (Only in 2D), Dynamic Flexion, ==== Elastic ==== First-order quadrangular finite elements Q4P1 are used in Yadics. ===== Local ===== Every global transform can be used on a local mesh. === Optimization === The YaDICs optimization process follows a gradient descent scheme. The first step is to compute the gradient of the metric regarding the transform parameters ∂ S S D ( μ , I F , I M ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ∂ I M ( T μ ( x i ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ( ∂ T μ ( x i ) ∂ μ ) t ∂ I M ( T μ ( x i ) ) ∂ x {\displaystyle {\begin{array}{lcl}{\dfrac {\partial SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right){\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i})}{\partial \mu }}\\&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)\left({\dfrac {\partial {T}_{\mu }(x_{i})}{\partial \mu }}\right)^{t}{\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i}))}{\partial x}}\\\end{array}}} ==== Gradient method ==== Once the metric gradient has been computed, one has to find an optimization strategy The gradient method principle is explained below: μ k + 1 = μ k + α k d k {\displaystyle \mu _{k+1}=\mu _{k}+\alpha _{k}d_{k}} The gradient step can be constant or updated at every iteration. d k = − γ k ∂ C ( μ , I F , I M ) ∂ μ {\displaystyle d_{k}=-\gamma _{k}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}} , γ k {\displaystyle \gamma _{k}} allows one to choose between the following methods : γ k {\displaystyle \gamma _{k}} ⟹ {\displaystyle \Longrightarrow } steepest descent, γ k = [ ∂ C ( μ , I F , I M ) ∂ μ ∂ C ( μ , I F , I M ) ∂ μ t ] − 1 {\displaystyle \gamma _{k}=\left[{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}^{t}\right]^{-1}} ⟹ {\displaystyle \Longrightarrow } Gauss-Newto
Read more →
Drops (app)

Drops is a language learning app that was created in Estonia by Daniel Farkas and Mark Szulyovszky in 2015. It is the second product from the company, after their first app, LearnInvisible, had issues in retaining a user's engagement over the required time period. The languages available include Native Hawaiian and Māori, and was classified as one of the fifty "Most Innovative Companies" for 2019 by Fast Company. The company partnered with Global Eagle Entertainment to include Travel Talk, a feature intended to focus on words and phrases frequently used by travelers. At the beginning of the COVID-19 pandemic in March 2020, the number of users increased by 55 percent in the United States and 92 percent in the United Kingdom. Droplets, a language app for children, includes profiles for multiple teachers working with remote students. The company also produces an app called Scripts, intended to help users learn to write alphabets. The app was purchased by the Norwegian company Kahoot! on 24 November 2020.
Read more →
Acoustic model

An acoustic model is used in automatic speech recognition to represent the relationship between an audio signal and the phonemes or other linguistic units that make up speech. The model is learned from a set of audio recordings and their corresponding transcripts. It is created by taking audio recordings of speech, and their text transcriptions, and using software to create statistical representations of the sounds that make up each word. == Background == Modern speech recognition systems use both an acoustic model and a language model to represent the statistical properties of speech. The acoustic model models the relationship between the audio signal and the phonetic units in the language. The language model is responsible for modeling the word sequences in the language. These two models are combined to get the top-ranked word sequences corresponding to a given audio segment. Most modern speech recognition systems operate on the audio in small chunks known as frames with an approximate duration of 10ms per frame. The raw audio signal from each frame can be transformed by applying the mel-frequency cepstrum. The coefficients from this transformation are commonly known as mel-frequency cepstral coefficients (MFCCs) and are used as an input to the acoustic model along with other features. Recently, the use of convolutional neural networks has led to major improvements in acoustic modeling. == Speech audio characteristics == Audio can be encoded at different sampling rates (i.e. samples per second – the most common being: 8, 16, 32, 44.1, 48, and 96 kHz), and different bits per sample (the most common being: 8-bits, 16-bits, 24-bits or 32-bits). Speech recognition engines work best if the acoustic model they use was trained with speech audio which was recorded at the same sampling rate/bits per sample as the speech being recognized. == Telephony-based speech recognition == The limiting factor for telephony based speech recognition is the bandwidth at which speech can be transmitted. For example, a standard land-line telephone only has a bandwidth of 64 kbit/s at a sampling rate of 8 kHz and 8-bits per sample (8000 samples per second 8-bits per sample = 64000 bit/s). Therefore, for telephony based speech recognition, acoustic models should be trained with 8 kHz/8-bit speech audio files. In the case of voice over IP, the codec determines the sampling rate/bits per sample of speech transmission. Codecs with a higher sampling rate/bits per sample for speech transmission (which improve the sound quality) necessitate acoustic models trained with audio data that matches that sampling rate/bits per sample. == Desktop-based speech recognition == For speech recognition on a standard desktop PC, the limiting factor is the sound card. Most sound cards today can record at sampling rates of between 16–48 kHz of audio, with bit rates of 8- to 16-bits per sample, and playback at up to 96 kHz. As a general rule, a speech recognition engine works better with acoustic models trained with speech audio data recorded at higher sampling rates/bits per sample. But using audio with too high a sampling rate/bits per sample can slow the recognition engine down. A compromise is needed. Thus for desktop speech recognition, the current standard is acoustic models trained with speech audio data recorded at sampling rates of 16 kHz/16 bits per sample.
Read more →
Structural similarity index measure

The structural similarity index measure (SSIM) is a method for predicting the perceived quality of digital television and cinematic pictures, as well as other kinds of digital images and videos. It is also used for measuring the similarity between two images. The SSIM index is a full reference metric; in other words, the measurement or prediction of image quality is based on an initial uncompressed or distortion-free image as reference. SSIM is a perception-based model that considers image degradation as perceived change in structural information, while also incorporating important perceptual phenomena, including both luminance masking and contrast masking terms. This distinguishes from other techniques such as mean squared error (MSE) or peak signal-to-noise ratio (PSNR) that instead estimate absolute errors. Structural information is the idea that the pixels have strong inter-dependencies especially when they are spatially close. These dependencies carry important information about the structure of the objects in the visual scene. Luminance masking is a phenomenon whereby image distortions (in this context) tend to be less visible in bright regions, while contrast masking is a phenomenon whereby distortions become less visible where there is significant activity or "texture" in the image. == History == The predecessor of SSIM was called Universal Quality Index (UQI), or Wang–Bovik index, which was developed by Zhou Wang and Alan Bovik in 2001. This evolved, through their collaboration with Hamid Sheikh and Eero Simoncelli, into the current version of SSIM, which was published in April 2004 in the IEEE Transactions on Image Processing. In addition to defining the SSIM quality index, the paper provides a general context for developing and evaluating perceptual quality measures, including connections to human visual neurobiology and perception, and direct validation of the index against human subject ratings. The basic model was developed in the Laboratory for Image and Video Engineering (LIVE) at The University of Texas at Austin and further developed jointly with the Laboratory for Computational Vision (LCV) at New York University. Further variants of the model have been developed in the Image and Visual Computing Laboratory at University of Waterloo and have been commercially marketed. SSIM subsequently found strong adoption in the image processing community and in the television and social media industries. The 2004 SSIM paper has been cited over 50,000 times according to Google Scholar, making it one of the highest cited papers in the image processing and video engineering fields. It was recognized with the IEEE Signal Processing Society Best Paper Award for 2009. It also received the IEEE Signal Processing Society Sustained Impact Award for 2016, indicative of a paper having an unusually high impact for at least 10 years following its publication. Because of its high adoption by the television industry, the authors of the original SSIM paper were each accorded a Primetime Engineering Emmy Award in 2015 by the Television Academy. == Algorithm == The SSIM index is calculated between two windows of pixel values x {\displaystyle x} and y {\displaystyle y} of common size, from corresponding locations in two images to be compared. These SSIM values can be aggregated across the full images by averaging or other variations. === Special-case formula === In one simple special case, further explained in the next section, the SSIM measure between x {\displaystyle x} and y {\displaystyle y} is: SSIM ( x , y ) = ( 2 μ x μ y + c 1 ) ( 2 σ x y + c 2 ) ( μ x 2 + μ y 2 + c 1 ) ( σ x 2 + σ y 2 + c 2 ) {\displaystyle {\hbox{SSIM}}(x,y)={\frac {(2\mu _{x}\mu _{y}+c_{1})(2\sigma _{xy}+c_{2})}{(\mu _{x}^{2}+\mu _{y}^{2}+c_{1})(\sigma _{x}^{2}+\sigma _{y}^{2}+c_{2})}}} with: μ x {\displaystyle \mu _{x}} the pixel sample mean of x {\displaystyle x} ; μ y {\displaystyle \mu _{y}} the pixel sample mean of y {\displaystyle y} ; σ x 2 {\displaystyle \sigma _{x}^{2}} the sample variance of x {\displaystyle x} ; σ y 2 {\displaystyle \sigma _{y}^{2}} the sample variance of y {\displaystyle y} ; σ x y {\displaystyle \sigma _{xy}} the sample covariance of x {\displaystyle x} and y {\displaystyle y} ; c 1 = ( k 1 L ) 2 {\displaystyle c_{1}=(k_{1}L)^{2}} , c 2 = ( k 2 L ) 2 {\displaystyle c_{2}=(k_{2}L)^{2}} two variables to stabilize the division with weak denominator; L {\displaystyle L} the dynamic range of the pixel-values (typically this is 2 # b i t s p e r p i x e l − 1 {\displaystyle 2^{\#bits\ per\ pixel}-1} ); k 1 = 0.01 {\displaystyle k_{1}=0.01} and k 2 = 0.03 {\displaystyle k_{2}=0.03} by default. === General formula and components === The SSIM formula is based on three comparison measurements between the samples of x {\displaystyle x} and y {\displaystyle y} : luminance ( l {\displaystyle l} ), contrast ( c {\displaystyle c} ), and structure ( s {\displaystyle s} ). The individual comparison functions are: l ( x , y ) = 2 μ x μ y + c 1 μ x 2 + μ y 2 + c 1 {\displaystyle l(x,y)={\frac {2\mu _{x}\mu _{y}+c_{1}}{\mu _{x}^{2}+\mu _{y}^{2}+c_{1}}}} c ( x , y ) = 2 σ x σ y + c 2 σ x 2 + σ y 2 + c 2 {\displaystyle c(x,y)={\frac {2\sigma _{x}\sigma _{y}+c_{2}}{\sigma _{x}^{2}+\sigma _{y}^{2}+c_{2}}}} s ( x , y ) = σ x y + c 3 σ x σ y + c 3 {\displaystyle s(x,y)={\frac {\sigma _{xy}+c_{3}}{\sigma _{x}\sigma _{y}+c_{3}}}} The SSIM for each block is then a weighted combination of those comparative measures: SSIM ( x , y ) = l ( x , y ) α ⋅ c ( x , y ) β ⋅ s ( x , y ) γ {\displaystyle {\text{SSIM}}(x,y)=l(x,y)^{\alpha }\cdot c(x,y)^{\beta }\cdot s(x,y)^{\gamma }} Choosing the third denominator stabilizing constant as: c 3 = c 2 / 2 {\displaystyle c_{3}=c_{2}/2} leads to a simplification when combining the c and s components with equal exponents ( β = γ {\displaystyle \beta =\gamma } ), as the numerator of c is then twice the denominator of s, leading to a cancellation leaving just a 2. Setting the weights (exponents) α , β , γ {\displaystyle \alpha ,\beta ,\gamma } to 1, the formula can then be reduced to the special case shown above. === Mathematical properties === SSIM satisfies the identity of indiscernibles, and symmetry properties, but not the triangle inequality or non-negativity, and thus is not a distance function. However, under certain conditions, SSIM may be converted to a normalized root MSE measure, which is a distance function. The square of such a function is not convex, but is locally convex and quasiconvex, making SSIM a feasible target for optimization. === Application of the formula === In order to evaluate the image quality, this formula is usually applied only on luma, although it may also be applied on color (e.g., RGB) values or chromatic (e.g. YCbCr) values. The resultant SSIM index is a decimal value between -1 and 1, where 1 indicates perfect similarity, 0 indicates no similarity, and -1 indicates perfect anti-correlation. For an image, it is typically calculated using a sliding Gaussian window of size 11×11 or a block window of size 8×8. The window can be displaced pixel-by-pixel on the image to create an SSIM quality map of the image. In the case of video quality assessment, the authors propose to use only a subgroup of the possible windows to reduce the complexity of the calculation. === Variants === ==== Multi-scale SSIM ==== A more advanced form of SSIM, called Multiscale SSIM (MS-SSIM) is conducted over multiple scales through a process of multiple stages of sub-sampling, reminiscent of multiscale processing in the early vision system. It has been shown to perform equally well or better than SSIM on different subjective image and video databases. ==== Multi-component SSIM ==== Three-component SSIM (3-SSIM) is a form of SSIM that takes into account the fact that the human eye can see differences more precisely on textured or edge regions than on smooth regions. The resulting metric is calculated as a weighted average of SSIM for three categories of regions: edges, textures, and smooth regions. The proposed weighting is 0.5 for edges, 0.25 for the textured and smooth regions. The authors mention that a 1/0/0 weighting (ignoring anything but edge distortions) leads to results that are closer to subjective ratings. This suggests that edge regions play a dominant role in image quality perception. The authors of 3-SSIM have also extended the model into four-component SSIM (4-SSIM). The edge types are further subdivided into preserved and changed edges by their distortion status. The proposed weighting is 0.25 for all four components. ==== Structural dissimilarity ==== Structural dissimilarity (DSSIM) may be derived from SSIM, though it does not constitute a distance function as the triangle inequality is not necessarily satisfied. DSSIM ( x , y ) = 1 − SSIM ( x , y ) 2 {\displaystyle {\hbox{DSSIM}}(x,y)={\frac {1-{\hbox{SSIM}}(x,y)}{2}}} ==== Video quality metrics and temporal variants ==== It is worth noting that the original vers
Read more →
Multi-focus image fusion

Multi-focus image fusion is a multiple image compression technique using input images with different focus depths to make one output image that preserves all information. == Overview == The main idea of image fusion is gathering important and the essential information from the input images into one single image which ideally has all of the information of the input images. The research history of image fusion spans over 30 years and many scientific papers. Image fusion generally has two aspects: image fusion methods and objective evaluation metrics. In visual sensor networks (VSN), sensors are cameras which record images and video sequences. In many applications of VSN, a camera can't give a perfect illustration including all details of the scene. This is because of the limited depth of focus of the optical lens of cameras. Therefore, just the object located in the focal length of camera is focused and clear, and other parts of the image are blurred. VSN captures images with different depths of focus using several cameras. Due to the large amount of data generated by cameras compared to other sensors such as pressure and temperature sensors and some limitations of bandwidth, energy consumption and processing time, it is essential to process the local input images to decrease the amount of transmitted data. == Multi-Focus image fusion in the spatial domain == Huang and Jing have reviewed and applied several focus measurements in the spatial domain for the multi-focus image fusion process, suitable for real-time applications. They mentioned some focus measurements including variance, energy of image gradient (EOG), Tenenbaum's algorithm (Tenengrad), energy of Laplacian (EOL), sum-modified-Laplacian (SML), and spatial frequency (SF). Their experiments showed that EOL gave better results than other methods like variance and spatial frequency. == Multi-Focus image fusion in multi-scale transform and DCT domain == Image fusion based on the multi-scale transform is the most commonly used and promising technique. Laplacian pyramid transform, gradient pyramid-based transform, morphological pyramid transform and the premier ones, discrete wavelet transform, shift-invariant wavelet transform (SIDWT), and discrete cosine harmonic wavelet transform (DCHWT) are some examples of image fusion methods based on multi-scale transform. These methods are complex and have some limitations e.g. processing time and energy consumption. For example, multi-focus image fusion methods based on DWT require a lot of convolution operations, so they take more time and energy to process. Therefore, most methods in multi-scale transform are not suitable for real-time applications. Moreover, these methods are not very successful along edges, due to the wavelet transform process missing the edges of the image. They create ringing artefacts in the output image and reduce its quality. Due to the aforementioned problems in the multi-scale transform methods, researchers are interested in multi-focus image fusion in the DCT domain. DCT-based methods are more efficient in terms of transmission and archiving images coded in Joint Photographic Experts Group (JPEG) standard to the upper node in the VSN agent. A JPEG system consists of a pair of an encoder and a decoder. In the encoder, images are divided into non-overlapping 8×8 blocks, and the DCT coefficients are calculated for each. Since the quantization of DCT coefficients is a lossy process, many of the small-valued DCT coefficients are quantized to zero, which corresponds to high frequencies. DCT-based image fusion algorithms work better when the multi-focus image fusion methods are applied in the compressed domain. In addition, in the spatial-based methods, the input images must be decoded and then transferred to the spatial domain. After implementation of the image fusion operations, the output fused images must again be encoded. DCT domain-based methods do not require complex and time-consuming consecutive decoding and encoding operations. Therefore, the image fusion methods based on DCT domain operate with much less energy and processing time. Recently, a lot of research has been carried out in the DCT domain. DCT+Variance, DCT+Corr_Eng, DCT+EOL, and DCT+VOL are some prominent examples of DCT based methods.
Read more →
Afghan Girls Robotics Team

The Afghan Girls Robotics Team, also known as the Afghan Dreamers, is an all-girl robotics team from Herat, Afghanistan, founded through the Digital Citizen Fund (DCF) in 2017 by Roya Mahboob and Alireza Mehraban. It is made up of girls between ages 12 and 18 and their mentors. Several members of the team were relocated to Qatar and Mexico by humanitarian and tech entrepreneur Sarah Porter following the fall of Kabul in August 2021. A documentary film featuring members of the team, titled Afghan Dreamers, was released by MTV Documentary Films in 2023. == Origins == The Afghan Girls Robotics Team was co-founded in 2017 by Roya Mahboob, who is their coach, mentor and sponsor, and founder of the Digital Citizen Fund (DCF), which is the parent organization for the team. Dean Kamen was planning a 2017 competition in the United States and had recruited Mahboob to form a team from Afghanistan. Out of 150 girls, 12 were selected for the first team. Before parts were sent by Kamen, they trained in the basement of the home of Mahboob's parents, with scrap metal and without safety equipment under the guidance of their coach, Mahboob's brother Alireza Mehraban, who is also a co-founder of the team. == 2017 and 2018 == In 2017, six members of the Afghan Girls Robotics Team traveled to the United States to participate in the international FIRST Global Challenge robotics competition. Their visas were rejected twice after they made two journeys from Herat to Kabul through Taliban-controlled areas, before officials in the United States government intervened to allow them to enter the United States. Customs officials also detained their robotics kits, which left them two weeks to construct their robot, unlike some teams that had more time. They were awarded a Silver medal for Courageous Achievement. One week after they returned home from the competition, the father of team captain Fatemah Qaderyan, Mohammad Asif Qaderyan, was killed in a suicide bombing. After their United States visas expired, the team participated in competitions in Estonia and Istanbul. Three of the 12 members participated in the 2017 Entrepreneurial Challenge at the Robotex festival in Estonia, and won the competition for their solar-powered robot designed to assist farmers. In 2018, the team trained in Canada, continued to travel in the United States for months and participate in competitions. == 2019 == The Afghan Girls Robotics team had aspirations to develop a science and technology school for girls in Afghanistan. Roya Mahboob interfaced with the School of Engineering and Applied Sciences (SEAS), the School of Architecture, and the Whitney and Betty MacMillan Center for International and Area Studies Yale University to design the infrastructure for what they named The Dreamer Institute. == 2020 == In March 2020, the governor of Herat at the time, in response to the COVID-19 pandemic in Afghanistan and a scarcity of ventilators, sought help with the design of low-cost ventilators, and the Afghan Girls Robotics Team was one of six teams contacted by the government. Using a design from Massachusetts Institute of Technology and with guidance from MIT engineers and Douglas Chin, a surgeon in California, the team developed a prototype with Toyota Corolla parts and a chain drive from a Honda motorcycle. UNICEF also supported the team with the acquisition of necessary parts during the three months they spent building the prototype that was completed in July 2020. Their design costs around $500 compared to $50,000 for a ventilator. In December 2020, Minister of Industry and Commerce Nizar Ahmad Ghoryani donated funding and obtained land for a factory to produce the ventilators. Under the direction of their mentor Roya Mahboob, the Afghan Dreamers also designed a UVC Robot for sanitization, and a Spray Robot for disinfection, both of which were approved by the Ministry of Health for production. == 2021 == In early August 2021, Somaya Faruqi, former captain of the team, was quoted by Public Radio International about the future of Afghanistan, stating, "We don’t support any group over another but for us what’s important is that we be able to continue our work. Women in Afghanistan have made a lot of progress over the past two decades and this progress must be respected." On August 17, 2021, the Afghan Girls Robotics Team and their coaches were reported to be attempting to evacuate, but unable to obtain a flight out of Afghanistan, and a lawyer appealed to Canada for assistance regarding the evacuation of the team members. As of August 19, 2021, nine members of the team and their coaches had evacuated to Qatar. The founder of the team, Roya Mahboob, and DCF board member, Elizabeth Schaeffer Brown, were previously in contact with the Qatari government to assist the team members in their evacuation from Afghanistan. By August 25, 2021, some members arrived in Mexico. Saghar, a team member who evacuated to Mexico, said, "We wanted to continue the path that we started to continue to go for our achievements and to go for having our dreams through reality. So that's why we decided to leave Afghanistan and go for somewhere safe" in an interview with The Associated Press. The members who have left Afghanistan participated in an online robotics competition in September and plan to continue their education. A documentary film titled Afghan Dreamers, produced by Beth Murphy and directed by David Greenwald, was in post-production when the team began to evacuate. == 2022 == The Afghan Dreamers were involved in a training program at the Texas A&M University at Qatar’s STEM Hub. == 2023 == The Afghan Girls Robotics Team had a booth at the 5th UN Conference on the Least Developed Countries, where they displayed some of the robots the team had constructed. == Afghan Dreamers documentary == The Afghan Dreamers documentary from MTV Documentary Films premiered in May 2023 on Paramount+. The film was directed by David Greenwald and produced by David Cowan and Beth Murphy. In a review for Screen Daily, Wendy Ide wrote, "This film, with its likeable cast of girl nerds and positive message, should enjoy a warm reception on the festival circuit, and will be of particular interest to events seeking to showcase women's stories from around the world. It also serves as a timely cautionary tale – a case study on just how quickly the rights and the opportunities of women can be curtailed, at the behest of the men in power." == Honors and awards == 2017 Silver medal for Courageous Achievement at the FIRST Global Challenge, science and technology 2017 Benefiting Humanity in AI Award at World Summit AI 2017 Winner, Entrepreneurship Challenge at Robotex in Estonia 2018 Permission to Dream Award, Raw Film Festival 2018 Conrad Innovation Challenge, Raw Film Festival 2018 Rookie All Star – District Championship, Canada 2018 Asia Game Changer Award Honoree 2019 Inspiring in Engineering Award – FIRST Detroit World Championship 2019 Asia Game Changer Award of California 2019 Safety Award – FIRST Global, Dubai 2021 Forbes 30 Under 30 Asia 2022 World Championships, Genoa, Switzerland
Read more →
Minimum resolvable contrast

Minimum resolvable contrast (MRC) is a subjective measure of a visible spectrum sensor’s or camera's sensitivity and ability to resolve data. A snapshot image of a series of three bar targets of selected spatial frequencies and various contrast coatings captured by the unit under test (UUT) is used to determine the MRC of the UUT, i.e., the visible spectrum camera or sensor. A trained observer selects the smallest target resolvable at each contrast level. Typically, specialized computer software collects the inputted data of the observer and provides a graph of contrast vs. spatial frequency at a given luminance level. A first order polynomial is fitted to the data and an MRC curve of spatial frequency versus contrast is generated.
Read more →
Direct voice input

Direct voice input (DVI), sometimes called voice input control (VIC), is a style of human–machine interaction "HMI" in which the user makes voice commands to issue instructions to the machine through speech recognition. In the field of military aviation, DVI has been introduced into the cockpits of several modern military aircraft, such as the Eurofighter Typhoon, the Lockheed Martin F-35 Lightning II, the Dassault Rafale, the KF-21 Boramae and the Saab JAS 39 Gripen. Such systems have also been used for various other purposes, including industry control systems and speech recognition assistance for impaired individuals. == Overview == DVI systems can be divided into two major categories of functionality: "user-dependent" or "user-independent". A user-dependent system requires that a personal voice template to be generated for a specific person; the template for this individual has to be loaded onto their assigned machine prior to use of the DVI system for it to function properly. In contrast, a user-independent system does not require any personal voice template, being intended to respond correctly to the voice of any user. They can also be categorised between "discrete recognition" and "continuous recognition". Users of a discrete recognition system must pause between each word so that the DVI system can identify the separations between each word, while a continuous speech recognition system is capable of understanding a normal rate of speech. During the mid-2000s, researchers at the National Aerospace Laboratory in the Netherlands examined the use of DVI in the "GRACE" simulator; a total of twelve pilots participated in the ensuing experiment. The tests performed reportedly revealed that, while the hardware itself functioned well, several improvements were desirable prior to real-world deployment on aircraft since DVI operations actually consumed more time in comparison to traditional existing methods. Recommendations for improvements included the adoption of simpler syntax, the achievement of a greater recognition rate, and a decrease in response times; all of the issues encountered were determined to be of a technological nature, and were deemed feasible to resolve. The researchers concluded that in cockpits, especially during emergencies where pilots have to operate entirely on their own, a DVI system could be highly relevant, but that it was not of crucial importance during most other conceivable scenarios. Around the same time, evaluations of DVI systems for civil aviation purposes were conducted within the framework of Project SafeSound, coordinated by the European Union. It involved the observation of pilot workloads in real-world cockpits and contrasting them against pilot activity in flight simulators using both conventional systems and DVI assistance. The project aimed to enhance aviation safety and to decrease the workload in both ground and flight operations via the application of enhanced audio functions. == Applications == === Aviation === Prior to its widespread deployment, a handful of conventional military aircraft were converted to trial DVI systems; examples include the Harrier AV-8B and F-16 VISTA. In another case, a General Dynamics F-16 Fighting Falcon simulator was modified with DVI for a voice control study that was undertaken by the Royal Netherlands Air Force. DVI trials have also been conducted on helicopters, including the Boeing AH-64 Apache, showing the potential to improve flight safety and mission effectiveness. Numerous modern fighter aircraft have been outfitted with DVI systems, often in combination with various other man-machine interface schemes, such as HOTAS-compliant controls and other advanced control technologies. The combination of Voice and HOTAS control schemes has sometimes been referred to as the "V-TAS" concept. A prominent fighter aircraft to be furnished with a V-TAS cockpit is the Eurofighter Typhoon. The Lockheed Martin F-35 Lightning II also features a DVI system, which was developed by Adacel. Other examples includes the Dassault Rafale and the Saab JAS 39 Gripen. Numerous aircraft have been planned to use DVI. At one stage, the United States Air Force had sought to integrate DVI upon the Lockheed Martin F-22 Raptor; however, the technology was eventually judged to pose too many technical risks at that point in time, and thus such efforts were abandoned. === Personal === By 1990, working prototypes of speech recognition systems were being demonstrated; these were being promoted for the purpose of providing an effective man-machine interface for individuals with impaired speech. Techniques employed included time-encoded digital speech and automatic token set selection. Investigations of these early DVI systems reportedly included the use of automatic diagnostic routines and limited-scale trials using volunteers. During the 2010s, various companies were offering voice recognition systems to the general public in the form of personal digital assistants. One example is the Google Voice service, which allows users to pose questions via a DVI package installed on either a personal computer, tablet, or mobile phone. Numerous digital assistants have been developed, such as Amazon Echo, Siri, and Cortana, that use DVI to interact with users. === Commercial === DVI technology has enabled automated telephone systems to be widely deployed. Many companies commonly use centralised phone systems that route callers to the correct department via such methods. Various car manufacturers have also furnished their road vehicles with DVI systems; these typically allow drivers to control infotainment systems and interact with mobile phones with more convenience than legacy methods. During the late 1980s, investigations into the use of DVI systems for controlling CNC machines and other manufacturing apparatus were underway. During the 2010s, such systems were being used for logistics and warehouse management purposes.
Read more →
Graph cut optimization

Graph cut optimization is a combinatorial optimization method applicable to a family of functions of discrete variables, named after the concept of cut in the theory of flow networks. Thanks to the max-flow min-cut theorem, determining the minimum cut over a graph representing a flow network is equivalent to computing the maximum flow over the network. Given a pseudo-Boolean function f {\displaystyle f} , if it is possible to construct a flow network with positive weights such that each cut C {\displaystyle C} of the network can be mapped to an assignment of variables x {\displaystyle \mathbf {x} } to f {\displaystyle f} (and vice versa), and the cost of C {\displaystyle C} equals f ( x ) {\displaystyle f(\mathbf {x} )} (up to an additive constant) then it is possible to find the global optimum of f {\displaystyle f} in polynomial time by computing a minimum cut of the graph. The mapping between cuts and variable assignments is done by representing each variable with one node in the graph and, given a cut, each variable will have a value of 0 if the corresponding node belongs to the component connected to the source, or 1 if it belong to the component connected to the sink. Not all pseudo-Boolean functions can be represented by a flow network, and in the general case the global optimization problem is NP-hard. There exist sufficient conditions to characterise families of functions that can be optimised through graph cuts, such as submodular quadratic functions. Graph cut optimization can be extended to functions of discrete variables with a finite number of values, that can be approached with iterative algorithms with strong optimality properties, computing one graph cut at each iteration. Graph cut optimization is an important tool for inference over graphical models such as Markov random fields or conditional random fields, and it has applications in computer vision problems such as image segmentation, denoising, registration and stereo matching. == Representability == A pseudo-Boolean function f : { 0 , 1 } n → R {\displaystyle f:\{0,1\}^{n}\to \mathbb {R} } is said to be representable if there exists a graph G = ( V , E ) {\displaystyle G=(V,E)} with non-negative weights and with source and sink nodes s {\displaystyle s} and t {\displaystyle t} respectively, and there exists a set of nodes V 0 = { v 1 , … , v n } ⊂ V − { s , t } {\displaystyle V_{0}=\{v_{1},\dots ,v_{n}\}\subset V-\{s,t\}} such that, for each tuple of values ( x 1 , … , x n ) ∈ { 0 , 1 } n {\displaystyle (x_{1},\dots ,x_{n})\in \{0,1\}^{n}} assigned to the variables, f ( x 1 , … , x n ) {\displaystyle f(x_{1},\dots ,x_{n})} equals (up to a constant) the value of the flow determined by a minimum cut C = ( S , T ) {\displaystyle C=(S,T)} of the graph G {\displaystyle G} such that v i ∈ S {\displaystyle v_{i}\in S} if x i = 0 {\displaystyle x_{i}=0} and v i ∈ T {\displaystyle v_{i}\in T} if x i = 1 {\displaystyle x_{i}=1} . It is possible to classify pseudo-Boolean functions according to their order, determined by the maximum number of variables contributing to each single term. All first order functions, where each term depends upon at most one variable, are always representable. Quadratic functions f ( x ) = w 0 + ∑ i w i ( x i ) + ∑ i < j w i j ( x i , x j ) . {\displaystyle f(\mathbf {x} )=w_{0}+\sum _{i}w_{i}(x_{i})+\sum _{i 0 {\displaystyle p>0} then w i j k ( x i , x j , x k ) = w i j k ( 0 , 0 , 0 ) + p 1 ( x i − 1 ) + p 2 ( x j − 1 ) + p 3 ( x k − 1 ) + p 23 ( x j − 1 ) x k + p 31 x i ( x k − 1 ) + p 12 ( x i − 1 ) x j − p x i x j x k {\displaystyle w_{ijk}(x_{i},x_{j},x_{k})=w_{ijk}(0,0,0)+p_{1}(x_{i}-1)+p_{2}(x_{j}-1)+p_{3}(x_{k}-1)+p_{23}(x_{j}-1)x_{k}+p_{31}x_{i}(x_{k}-1)+p_{12}(x_{i}-1)x_{j}-px_{i}x_{j}x_{k}} with p 1 = w i j k ( 1 , 0 , 1 ) − w i j k ( 0 , 0 , 1 ) p 2 = w i j k ( 1 , 1 , 0 ) − w i j k ( 1 , 0 , 1 ) p 3 = w i j k ( 0 , 1 , 1 ) − w i j k ( 0 , 1 , 0 ) p 23 = w i j k ( 0 , 0 , 1 ) + w i j k ( 0 , 1 , 0 ) − w i j k ( 0 , 0 , 0 ) − w i j k ( 0 , 1 , 1 ) p 31 = w i j k ( 0 , 0 , 1 ) + w i j k ( 1 , 0 , 0 ) − w i j k ( 0 , 0 , 0 ) − w i j k ( 1 , 0 , 1 ) p 12 = w i j k ( 0 , 1 , 0 ) + w i j k ( 1 , 0 , 0 ) − w i j k ( 0 , 0 , 0 ) − w i j k ( 1 , 1 , 0 ) . {\displaystyle {\begin{aligned}p_{1}&=w_{ijk}(1,0,1)-w_{ijk}(0,0,1)\\p_{2}&=w_{ijk}(1,1,0)-w_{ijk}(1,0,1)\\p_{3}&=w_{ijk}(0,1,1)-w_{ijk}(0,1,0)\\p_{23}&=w_{ijk}(0,0,1)+w_{ijk}(0,1,0)-w_{ijk}(0,0,0)-w_{ijk}(0,1,1)\\p_{31}&=w_{ijk}(0,0,1)+w_{ijk}(1,0,0)-w_{ijk}(0,0,0)-w_{ijk}(1,0,1)\\p_{12}&=w_{ijk}(0,1,0)+w_{ijk}(1,0,0)-w_{ijk}(0,0,0)-w_{ijk}(1,1
Read more →
Parasolid

Parasolid is a geometric modeling kernel originally developed by Shape Data Limited, now owned and developed by Siemens Digital Industries Software. It can be licensed by other companies for use in their 3D computer graphics software products. Parasolid's abilities include model creation and editing utilities such as Boolean modeling operators, feature modeling support, advanced surfacing, thickening and hollowing, blending and filleting, and sheet modeling. It also incorporates modeling with mesh surfaces and lattices. Parasolid also includes tools for direct model editing, including tapering, offsetting, geometry replacement and removing feature details with automated regeneration of surrounding data. Parasolid also provides wide-ranging graphical and rendering support, including hidden-line, wireframe and drafting, tessellation, and model data inquiries. To use Parasolid effectively, software developers need knowledge of CAD in general, computational geometry, and topology. Parasolid is available for Windows (32-bit, 64-bit and AArch64), Linux (64-bit and AArch64), macOS (Apple silicon and Intel), iOS, and Android. == Parasolid XT format == Parasolid parts are normally saved in XT format, which usually has the file extension .X_T. The format is documented and open. There is also a binary version of the format, usually with an .X_B extension, which is somewhat more compact. Both .X_T and .X_B are used for parts files. == Applications == It is used in many computer-aided design (CAD), computer-aided manufacturing (CAM), computer-aided engineering (CAE), product visualization, and CAD data exchange packages. Notable uses include:
Read more →
YrWall

YrWall is a Digital Graffiti Wall developed by event company Luma, where designs are created on a large wall using a modified spray paint can. The can contains no paint, instead it has an IR light which is tracked by a computer vision system and the image immediately back-projected onto the wall. The inbuilt YrWall software has much of the functionality of a typical computer paint program, with a pop-out interface which enables users to change colour, spray width, opacity, work with stencils and use animated items such as swirls, stars, drips and splats. Recent additions to YrWall include options to email a JPEG of the completed design and create personalised stickers and T-shirts. == Dragons' Den == The inventor of YrWall, Tom Hogan, and his business partner, Tim Williams, appeared on Episode 4 of Series 8 of the BBC show Dragons' Den. Seeking investment in YrWall, the entrepreneurs were successful in gaining £50,000 for 40% of the YrWall parent company Lumacoustics from Dragons Deborah Meaden and Peter Jones. == World's Largest Interactive Graffiti Wall == In September 2009 YrWall was used to create the 'World's Largest Interactive Graffiti Wall' at the Bristol Festival, UK. Artists used the standard 3.5 m2 YrWall to produce artwork which was in turn projected live onto a 26m x 10m space on the side of the iconic Lloyds amphitheatre building.
Read more →