AI Detector That Colleges Use

AI Detector That Colleges Use — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Buckeye Corpus

  The Buckeye Corpus of conversational speech is a speech corpus created by a team of linguists and psychologists at Ohio State University led by Prof. Mark Pitt. It contains high-quality recordings from 40 speakers in Columbus, Ohio conversing freely with an interviewer. The interviewer's voice is heard only faintly in the background of these recordings. The sessions were conducted as Sociolinguistics interviews, and are essentially monologues. The speech has been orthographically transcribed and phonetically labeled. The audio and text files, together with time-aligned phonetic labels, are stored in a format for use with speech analysis software (Xwaves and Wavesurfer). Software for searching the transcription files is also available at the project web site. The corpus is available to researchers in academia and industry. The project was funded by the National Institute on Deafness and Other Communication Disorders and the Office of Research at Ohio State University.

  Read more →
• 

  Random neural network

  The Random Neural Network (RNN) is a mathematical representation of an interconnected network of neurons or cells which exchange spiking signals. It was invented by Erol Gelenbe and is linked to the G-network model of queueing networks which Erol Gelenbe also invented, and with his Gene Regulatory Network models. In this model, each neuronal cell state is represented by an integer whose value rises when the cell receives an excitatory spike and drops when it receives an inhibitory spike. The spikes can originate outside the network itself, or they can come from other cells in the networks. Cells whose internal excitatory state has a positive value are allowed to send out spikes of either kind to other cells in the network according to specific cell-dependent spiking rates. The model has a mathematical solution in steady-state which provides the joint probability distribution of the network in terms of the individual probabilities that each cell is excited and able to send out spikes. Computing this solution is based on solving a set of non-linear algebraic equations whose parameters are related to the spiking rates of individual cells and their connectivity to other cells, as well as the arrival rates of spikes from outside the network. The RNN is a recurrent model, i.e. a neural network that is allowed to have complex feedback loops. A highly energy-efficient implementation of random neural networks was demonstrated by Krishna Palem et al. using the Probabilistic CMOS or PCMOS technology and was shown to be c. 226–300 times more efficient in terms of Energy-Performance-Product. RNNs are also related to artificial neural networks, which (like the random neural network) have gradient-based learning algorithms. The learning algorithm for an n-node random neural network that includes feedback loops (it is also a recurrent neural network) is of computational complexity O(n^3) (the number of computations is proportional to the cube of n, the number of neurons). The random neural network can also be used with other learning algorithms such as reinforcement learning. The RNN has been shown to be a universal approximator for bounded and continuous functions.

  Read more →
• 

  Recursive neural network

  A recursive neural network is a kind of deep neural network created by applying the same set of weights recursively over a structured input, to produce a structured prediction over variable-size input structures, or a scalar prediction on it, by traversing a given structure in topological order. These networks were first introduced to learn distributed representations of structure (such as logical terms), but have been successful in multiple applications, for instance in learning sequence and tree structures in natural language processing (mainly continuous representations of phrases and sentences based on word embeddings). == Architectures == === Basic === In the simplest architecture, nodes are combined into parents using a weight matrix (which is shared across the whole network) and a non-linearity such as the tanh {\displaystyle \tanh } hyperbolic function. If c 1 {\displaystyle c_{1}} and c 2 {\displaystyle c_{2}} are n {\displaystyle n} -dimensional vector representations of nodes, their parent will also be an n {\displaystyle n} -dimensional vector, defined as: p 1 , 2 = tanh ⁡ ( W [ c 1 ; c 2 ] ) {\displaystyle p_{1,2}=\tanh(W[c_{1};c_{2}])} where W {\displaystyle W} is a learned n × 2 n {\displaystyle n\times 2n} weight matrix. This architecture, with a few improvements, has been used for successfully parsing natural scenes, syntactic parsing of natural language sentences, and recursive autoencoding and generative modeling of 3D shape structures in the form of cuboid abstractions. === Recursive cascade correlation (RecCC) === RecCC is a constructive neural network approach to deal with tree domains with pioneering applications to chemistry and extension to directed acyclic graphs. === Unsupervised RNN === A framework for unsupervised RNN has been introduced in 2004. === Tensor === Recursive neural tensor networks use a single tensor-based composition function for all nodes in the tree. == Training == === Stochastic gradient descent === Typically, stochastic gradient descent (SGD) is used to train the network. The gradient is computed using backpropagation through structure (BPTS), a variant of backpropagation through time used for recurrent neural networks. == Properties == The universal approximation capability of RNNs over trees has been proved in literature. == Related models == === Recurrent neural networks === Recurrent neural networks are recursive artificial neural networks with a certain structure: that of a linear chain. Whereas recursive neural networks operate on any hierarchical structure, combining child representations into parent representations, recurrent neural networks operate on the linear progression of time, combining the previous time step and a hidden representation into the representation for the current time step. === Tree Echo State Networks === An efficient approach to implement recursive neural networks is given by the Tree Echo State Network within the reservoir computing paradigm. === Extension to graphs === Extensions to graphs include graph neural network (GNN), Neural Network for Graphs (NN4G), and more recently convolutional neural networks for graphs.

  Read more →
• 

  Quadratic classifier

  In statistics, a quadratic classifier is a statistical classifier that uses a quadratic decision surface to separate measurements of two or more classes of objects or events. It is a more general version of the linear classifier. == The classification problem == Statistical classification considers a set of vectors of observations x of an object or event, each of which has a known type y. This set is referred to as the training set. The problem is then to determine, for a given new observation vector, what the best class should be. For a quadratic classifier, the correct solution is assumed to be quadratic in the measurements, so y will be decided based on x T A x + b T x + c {\displaystyle \mathbf {x^{T}Ax} +\mathbf {b^{T}x} +c} In the special case where each observation consists of two measurements, this means that the surfaces separating the classes will be conic sections (i.e., either a line, a circle or ellipse, a parabola or a hyperbola). In this sense, we can state that a quadratic model is a generalization of the linear model, and its use is justified by the desire to extend the classifier's ability to represent more complex separating surfaces. == Quadratic discriminant analysis == Quadratic discriminant analysis (QDA) is closely related to linear discriminant analysis (LDA), where it is assumed that the measurements from each class are normally distributed. Unlike LDA however, in QDA there is no assumption that the covariance of each of the classes is identical. When the normality assumption is true, the best possible test for the hypothesis that a given measurement is from a given class is the likelihood ratio test. Suppose there are only two groups, with means μ 0 , μ 1 {\displaystyle \mu _{0},\mu _{1}} and covariance matrices Σ 0 , Σ 1 {\displaystyle \Sigma _{0},\Sigma _{1}} corresponding to y = 0 {\displaystyle y=0} and y = 1 {\displaystyle y=1} respectively. Then the likelihood ratio is given by Likelihood ratio = | 2 π Σ 1 | − 1 exp ⁡ ( − 1 2 ( x − μ 1 ) T Σ 1 − 1 ( x − μ 1 ) ) | 2 π Σ 0 | − 1 exp ⁡ ( − 1 2 ( x − μ 0 ) T Σ 0 − 1 ( x − μ 0 ) ) < t {\displaystyle {\text{Likelihood ratio}}={\frac {{\sqrt {|2\pi \Sigma _{1}|}}^{-1}\exp \left(-{\frac {1}{2}}(\mathbf {x} -{\boldsymbol {\mu }}_{1})^{T}\Sigma _{1}^{-1}(\mathbf {x} -{\boldsymbol {\mu }}_{1})\right)}{{\sqrt {|2\pi \Sigma _{0}|}}^{-1}\exp \left(-{\frac {1}{2}}(\mathbf {x} -{\boldsymbol {\mu }}_{0})^{T}\Sigma _{0}^{-1}(\mathbf {x} -{\boldsymbol {\mu }}_{0})\right)}} Read more →

• 

  Ogle app

  Ogle is a free smartphone based social media application. It is available for iOS and Android. Ogle acts like a school wide forum that lets users and users' classmates share and interact. Users can share photos, videos, questions, even thoughts and watch submissions grow in popularity as other users vote and comment on them. == App Features == Campus Feed: Interact by watching and posting videos or pictures to your campus story. Photos and Videos: share what you want with many different timing options. Interact: Chat with friends and groups, or share a moment for all to see. Real-name system: choose to register an account with username and profile picture. Custom Stickers: Create stickers to add creativity and zest to your pictures. Flash Interaction: All private chat and group chat history will be deleted after 24 hours on Ogle Chat. == Controversies == Users can post anything on Ogle using text, photos, and videos. As a result, some Ogle user's sense of anonymity, posts have targeted specific schools and students with abusive and hurtful content. The Ogle app's user anonymity makes it difficult for school officials to quickly investigate issues that occur within the Ogle app. On March 28, 2016, three people were arrested after violent threats were made against an Anaheim high school. 18-year-old Miguel Meza was arrested Sunday afternoon during a traffic stop, along with his passenger, 23-year-old Johnny Aguilar. Police said both men had loaded handguns. Aguilar was also accused of violating his probation. "It is concerning the fact that they did have firearms, but we don't have a crystal ball. We can't determine if they possessed those firearms to engage in some kind of school violence or if they had it for another reason," Sgt. Daron Wyatt with the Anaheim Police Department said. Officials said Meza and Aguilar have known gang ties and detectives began investigating Meza after threats were made against the school on Ogle. On February 29, 2016, Santa Cruz County sheriff's deputies arrested a 16-year-old Aptos High School student Friday, accused of making an online threat of gun violence at Aptos High and Monte Vista Christian."He basically told detectives that it was all a joke. It's not a joke. You have multiple resources being spent to investigate these cases," said Santa Cruz County Sheriff's Sgt. Roy Morales. The schools remained open throughout the week, with a huge police presence on campus. In an anonymous emailed statement to the Daily Pilot on Thursday, the "Ogle team" said: "We are aware of the concern, and cyberbullying is absolutely NOT our intention for the app. Our goal for this app is to create a free and safe community space for students, for a better communication. We are currently working around the clock to improve the app. As a matter of fact, we are also in contact with local police departments, anti-bullying organizations and local high schools to try to help the students." In response to these incidents, Ogle expressed that they takes the safety of its users seriously and does not condone any type of behavior that is illegal or in violation of its content policies. The company also said it has instituted a content moderation team to increase review and identify and remove inappropriate content, and take action against “those who violate our community guidelines.”

  Read more →
• 

  Feature selection

  In machine learning, feature selection is the process of selecting a subset of relevant features (variables, predictors) for use in model construction. Feature selection techniques are used for several reasons: simplification of models to make them easier to interpret, shorter training times, to avoid the curse of dimensionality, improve the compatibility of the data with a certain learning model class, to encode inherent symmetries present in the input space. The central premise when using feature selection is that data sometimes contains features that are redundant or irrelevant, and can thus be removed without incurring much loss of information. Redundancy and irrelevance are two distinct notions, since one relevant feature may be redundant in the presence of another relevant feature with which it is strongly correlated. Feature extraction creates new features from functions of the original features, whereas feature selection finds a subset of the features. Feature selection techniques are often used in domains where there are many features and comparatively few samples (data points). == Introduction == A feature selection algorithm can be seen as the combination of a search technique for proposing new feature subsets, along with an evaluation measure which scores the different feature subsets. The simplest algorithm is to test each possible subset of features finding the one which minimizes the error rate. This is an exhaustive search of the space, and is computationally intractable for all but the smallest of feature sets. The choice of evaluation metric heavily influences the algorithm, and it is these evaluation metrics which distinguish between the three main categories of feature selection algorithms: wrappers, filters and embedded methods. Wrapper methods use a predictive model to score feature subsets. Each new subset is used to train a model, which is tested on a hold-out set. Counting the number of mistakes made on that hold-out set (the error rate of the model) gives the score for that subset. As wrapper methods train a new model for each subset, they are very computationally intensive, but usually provide the best performing feature set for that particular type of model or typical problem. Filter methods use a proxy measure instead of the error rate to score a feature subset. This measure is chosen to be fast to compute, while still capturing the usefulness of the feature set. Common measures include the mutual information, the pointwise mutual information, Pearson product-moment correlation coefficient, Relief-based algorithms, and inter/intra class distance or the scores of significance tests for each class/feature combinations. Filters are usually less computationally intensive than wrappers, but they produce a feature set which is not tuned to a specific type of predictive model. This lack of tuning means a feature set from a filter is more general than the set from a wrapper, usually giving lower prediction performance than a wrapper. However the feature set doesn't contain the assumptions of a prediction model, and so is more useful for exposing the relationships between the features. Many filters provide a feature ranking rather than an explicit best feature subset, and the cut off point in the ranking is chosen via cross-validation. Filter methods have also been used as a preprocessing step for wrapper methods, allowing a wrapper to be used on larger problems. One other popular approach is the Recursive Feature Elimination algorithm, commonly used with Support Vector Machines to repeatedly construct a model and remove features with low weights. Embedded methods are a catch-all group of techniques which perform feature selection as part of the model construction process. The exemplar of this approach is the LASSO method for constructing a linear model, which penalizes the regression coefficients with an L1 penalty, shrinking many of them to zero. Any features which have non-zero regression coefficients are 'selected' by the LASSO algorithm. Improvements to the LASSO include Bolasso which bootstraps samples; Elastic net regularization, which combines the L1 penalty of LASSO with the L2 penalty of ridge regression; and FeaLect which scores all the features based on combinatorial analysis of regression coefficients. AEFS further extends LASSO to nonlinear scenario with autoencoders. These approaches tend to be between filters and wrappers in terms of computational complexity. In traditional regression analysis, the most popular form of feature selection is stepwise regression, which is a wrapper technique. It is a greedy algorithm that adds the best feature (or deletes the worst feature) at each round. The main control issue is deciding when to stop the algorithm. In machine learning, this is typically done by cross-validation. In statistics, some criteria are optimized. This leads to the inherent problem of nesting. More robust methods have been explored, such as branch and bound and piecewise linear network. == Subset selection == Subset selection evaluates a subset of features as a group for suitability. Subset selection algorithms can be broken up into wrappers, filters, and embedded methods. Wrappers use a search algorithm to search through the space of possible features and evaluate each subset by running a model on the subset. Wrappers can be computationally expensive and have a risk of over fitting to the model. Filters are similar to wrappers in the search approach, but instead of evaluating against a model, a simpler filter is evaluated. Embedded techniques are embedded in, and specific to, a model. Many popular search approaches use greedy hill climbing, which iteratively evaluates a candidate subset of features, then modifies the subset and evaluates if the new subset is an improvement over the old. Evaluation of the subsets requires a scoring metric that grades a subset of features. Exhaustive search is generally impractical, so at some implementor (or operator) defined stopping point, the subset of features with the highest score discovered up to that point is selected as the satisfactory feature subset. The stopping criterion varies by algorithm; possible criteria include: a subset score exceeds a threshold, a program's maximum allowed run time has been surpassed, etc. Alternative search-based techniques are based on targeted projection pursuit which finds low-dimensional projections of the data that score highly: the features that have the largest projections in the lower-dimensional space are then selected. Search approaches include: Exhaustive Best first Simulated annealing Genetic algorithm Greedy forward selection Greedy backward elimination Particle swarm optimization Targeted projection pursuit Scatter search Variable neighborhood search Two popular filter metrics for classification problems are correlation and mutual information, although neither are true metrics or 'distance measures' in the mathematical sense, since they fail to obey the triangle inequality and thus do not compute any actual 'distance' – they should rather be regarded as 'scores'. These scores are computed between a candidate feature (or set of features) and the desired output category. There are, however, true metrics that are a simple function of the mutual information; see here. Other available filter metrics include: Class separability Error probability Inter-class distance Probabilistic distance Entropy Consistency-based feature selection Correlation-based feature selection == Optimality criteria == The choice of optimality criteria is difficult as there are multiple objectives in a feature selection task. Many common criteria incorporate a measure of accuracy, penalised by the number of features selected. Examples include Akaike information criterion (AIC) and Mallows's Cp, which have a penalty of 2 for each added feature. AIC is based on information theory, and is effectively derived via the maximum entropy principle. Other criteria are Bayesian information criterion (BIC), which uses a penalty of log ⁡ n {\displaystyle {\sqrt {\log {n}}}} for each added feature, minimum description length (MDL) which asymptotically uses log ⁡ n {\displaystyle {\sqrt {\log {n}}}} , Bonferroni / RIC which use 2 log ⁡ p {\displaystyle {\sqrt {2\log {p}}}} , maximum dependency feature selection, and a variety of new criteria that are motivated by false discovery rate (FDR), which use something close to 2 log ⁡ p q {\displaystyle {\sqrt {2\log {\frac {p}{q}}}}} . A maximum entropy rate criterion may also be used to select the most relevant subset of features. == Structure learning == Filter feature selection is a specific case of a more general paradigm called structure learning. Feature selection finds the relevant feature set for a specific target variable whereas structure learning finds the relationships between all the variables, usually by expressing these relationships as a graph. The most common structure learning algorithms

  Read more →
• 

  Optimal discriminant analysis and classification tree analysis

  Optimal Discriminant Analysis (ODA) and the related classification tree analysis (CTA) are exact statistical methods that maximize predictive accuracy. For any specific sample and exploratory or confirmatory hypothesis, optimal discriminant analysis (ODA) identifies the statistical model that yields maximum predictive accuracy, assesses the exact Type I error rate, and evaluates potential cross-generalizability. Optimal discriminant analysis may be applied to > 0 dimensions, with the one-dimensional case being referred to as UniODA and the multidimensional case being referred to as MultiODA. Optimal discriminant analysis is an alternative to ANOVA (analysis of variance) and regression analysis.

  Read more →
• 

  Time-aware long short-term memory

  Time-aware LSTM (T-LSTM) is a long short-term memory (LSTM) unit capable of handling irregular time intervals in longitudinal patient records. T-LSTM was developed by researchers from Michigan State University, IBM Research, and Cornell University and was first presented in the Knowledge Discovery and Data Mining (KDD) conference. Experiments using real and synthetic data proved that T-LSTM auto-encoder outperformed widely used frameworks including LSTM and MF1-LSTM auto-encoders.

  Read more →
• 

  Deluxe Paint

  Deluxe Paint, often referred to as DPaint, is a bitmap graphics editor created by Dan Silva for Electronic Arts and published for the then-new Amiga 1000 in November 1985. A series of updated versions followed, some of which were ported to other platforms. An MS-DOS release with support for the 256 color VGA standard became popular for creating pixel graphics in video games in the 1990s. Author Dan Silva previously worked on the Cut & Paste word processor (1984), also from Electronic Arts. == History == Deluxe Paint began as an in-house art development tool called Prism. As author Dan Silva added features to Prism, it was developed as a showcase product to coincide with the Amiga's debut in 1985. Upon release, it was quickly embraced by the Amiga community and became the de facto graphics (and later animation) editor for the platform. Amiga manufacturer Commodore International later commissioned EA to create version 4.5 AGA to bundle with the new Advanced Graphics Architecture chipset (A1200, A4000) capable Amigas. Version 5 was the last release after Commodore's bankruptcy in 1994. Early versions of Deluxe Paint were available in protected and non copy-protected versions, the latter retailing for a slightly higher price. The copy protection scheme was later dropped. Deluxe Paint was first in a series of products from the Electronic Arts Tools group—then later moved to the ICE (for Interactivity, Creativity, and Education) group—which included such Amiga programs as Deluxe Music Construction Set (preceded by Music Construction Set for the Apple II), Deluxe Video, and the Studio series of paint programs for the Mac. With the development of Deluxe Paint, EA introduced the ILBM and ANIM file format standards for graphics. While widely used on the Amiga, these formats never gained widespread end user acceptance on other platforms, but were heavily used by game development companies. Deluxe Paint was used by LucasArts to make graphics for their adventure games such as The Secret of Monkey Island, and the name of a particular filename used to store the main protagonist Guybrush Threepwood was probably at the origin of his peculiar name. One of the main artist developer of the game, Mark Ferrari, in an interview for The Making of Monkey Island 30th Anniversary Documentary remembers that "there was a pulldown menu in DPaint called brushes, so character sprites were referred to as brushes", and the male protagonist was simply "the guy.brush" until the artist Steve Purcell suggested to take the very name "Guybrush". The author Ron Gilbert remembers that the PC DOS version of the file was named "guybrush.bbm". == Versions == === Amiga === Deluxe Paint I was released in 1985. A major feature was animation by using color cycling. The Amiga natively supports indexed color, where a pixel's color value does not carry any RGB hue information but instead is an index to a color palette (a collection of unique color values). By adjusting the color value in the palette, all pixels with that palette value change simultaneously in the image or animation, creating cyclic movement in the image. In the Christmas demo files on the Deluxe Paint I disk, this kind of animation (which is toggled by pressing the tab key) is used to depict falling snowflakes, a blinking Christmas tree, and a roaring fire in the fireplace. In 1986, Deluxe Paint II was introduced, which added many convenient features such as pattern and gradient fill, which could be selected by right-clicking on a fill tool. An effects menu with e.g. perspective transformation was also added. The screen format could now be changed from a dedicated selection page. Deluxe Paint III appeared in 1989 and added support for Extra Halfbrite. New editing modes allowed one to stencil certain colors to protect them, so it is possible to e.g. paint a landscape from front to back, with the foreground protected by a stencil. A major new feature of Deluxe Paint III was the ability to create cel-like animation, and animbrushes (1MB of RAM is needed for animation). These let the user pick up a section of an animation as an "animbrush", which can then be placed onto the canvas while it animates. Deluxe Paint III was one of the first paint programs to support animbrushes. This is similar to copy and paste, except one can pick up more than one image. Deluxe Paint IV (introduced in 1991), which did not include Silva as the lead programmer, offered significant new features like non-bitplane-indexed Hold-and-Modify support for creating images with up to 4,096 colors. Animation support was improved by adding a light table, i.e. onion skinning, and AnimBrush morphing. The color mixer was now a HAM region at the bottom of the screen (instead of a floating window as before) and allowed mixing adjacent colors similar to a real palette. Deluxe Paint 4.5 AGA appeared the following year, addressing the stability issues and providing support for the new A1200 and A4000 AGA machines and a revamped screen mode interface. It appeared in both standalone and Commodore-bundled versions. The final release, Deluxe Paint V, in 1995, supported true 24-bit RGB images. However, using only the AGA native chipset, the 24-bit RGB color was only held in computer memory, the on-screen image was displayed in HAM8 (18-bit color). === Apple IIGS === DeluxePaint II for the Apple IIGS was developed by Brent Iverson and released in 1987. === MS-DOS === Deluxe Paint II for MS-DOS was released in 1988, It required MS-DOS 2.0 and 640 kB of RAM. It supports CGA, EGA, MCGA, VGA, Hercules and Tandy IBM PC-compatible graphic cards. Deluxe Paint II Enhanced was released in 1989, requiring MS-DOS 2.11 and 640 kB of RAM. It supports resolutions up to 800x600 pixels with 256 colors. Deluxe Paint II Enhanced 2.0, released in 1994, was the most successful MS-DOS version, and was compatible with PC Paintbrush PCX image files. The MS-DOS conversion was done by Brent Iverson with the enhanced features by Steve Shaw. It supports CGA, EGA, MCGA, VGA, Hercules, Tandy, and Amstrad video cards, as well as early Super VGA video cards enabling it to support up to 800 × 600 with 256 (from 262,144) colors and 1024 × 768 with 16 colors. The sister product Deluxe Paint Animation (only for 320×200 pixels and 256 colors) was widely used, especially in video game development. === Atari ST === Deluxe Paint ST was developed by ArtisTech Development, published by Electronic Arts, and was released in 1990. It supports the Atari STE 4096 color palette and animated graphics. Features advertised for the Atari ST version include 3D perspective, design your own fonts, mirror symmetry, multi-color airbrushing & animations, printing up to poster size, split-screen magnification with variable zoom, and working on animations (including multiple animations). == Workflow == "[" and "]" hotkeys step through the indexed palette, turning indexed-pixel-painting into a fast two-handed mouse+keys process, and the right mouse button paints with the background color. For example, transparency is obtained as simply as selecting a background color index (a single right click on the palette GUI to change). colors could be locked from editing by use of a stencil (a list of color indices whose pixels should not be altered in the image data) and simple color-cycling animations could be created using contiguous entries in the palette. This was easy to change the hue and tone of a section of the image by altering the corresponding colors in the palette. (The specific section needed to use a dedicated part of the palette for this technique to work.) Brushes can be cut from the background by using the box, freehand, or polygon selection tools. They can then be used in the same manner as any other brush or pen. This functionality is simpler to use than the "stamp" tool of Photoshop or Alpha Channels as provided in later programs. Brushes can be rotated and scaled, even in 3D. After a brush is selected, it appears attached to the mouse cursor, providing an exact preview of what will be drawn. This allows precise pixel positioning of brushes. Animations stored in IFF ANIM format are delta compressed making animations both smaller and faster to playback. == Reception == Compute! criticized the documentation of the first release of DeluxePaint as inadequate, but stated that "DeluxePaint is a visual arts program of immense scope and flexibility". In later versions the documentation was much improved; for instance DeluxePaint IV came with a 300-page manual. Deluxe Paint was a hit for EA. The main line of the series, particularly installments one to three, has won a total of at least nine awards from independent publications and organizations, including three Amiga-specific awards. Deluxe Paint III also won Commodore International's Enterprise and Vision award in 1990, becoming the first software to win the award, for what the company's judges believed to be best utilizing the Amiga's graphical capabilities. Deluxe Pai

  Read more →
• 

  Variational autoencoder

  In machine learning, a variational autoencoder (VAE) is an artificial neural network architecture introduced by Diederik P. Kingma and Max Welling in 2013. It is part of the families of probabilistic graphical models and variational Bayesian methods. In addition to being seen as an autoencoder neural network architecture, variational autoencoders can also be studied within the mathematical formulation of variational Bayesian methods, connecting a neural encoder network to its decoder through a probabilistic latent space (for example, as a multivariate Gaussian distribution) that corresponds to the parameters of a variational distribution. Thus, the encoder maps each point (such as an image) from a large complex dataset into a distribution within the latent space, rather than to a single point in that space. The decoder has the opposite function, which is to map from the latent space to the input space, again according to a distribution (although in practice, noise is rarely added during the decoding stage). By mapping a point to a distribution instead of a single point, the network can avoid overfitting the training data. Both networks are typically trained together with the usage of the reparameterization trick, although the variance of the noise model can be learned separately. Although this type of model was initially designed for unsupervised learning, its effectiveness has been proven for semi-supervised learning and supervised learning. == Overview of architecture and operation == A variational autoencoder is a generative model with a prior and noise distribution respectively. Usually such models are trained using the expectation-maximization meta-algorithm (e.g. probabilistic PCA, (spike & slab) sparse coding). Such a scheme optimizes a lower bound of the data likelihood, which is usually computationally intractable, and in doing so requires the discovery of q-distributions, or variational posteriors. These q-distributions are normally parameterized for each individual data point in a separate optimization process. However, variational autoencoders use a neural network as an amortized approach to jointly optimize across data points. In that way, the same parameters are reused for multiple data points, which can result in massive memory savings. The first neural network takes as input the data points themselves, and outputs parameters for the variational distribution. As it maps from a known input space to the low-dimensional latent space, it is called the encoder. The decoder is the second neural network of this model. It is a function that maps from the latent space to the input space, e.g. as the means of the noise distribution. It is possible to use another neural network that maps to the variance, however this can be omitted for simplicity. In such a case, the variance can be optimized with gradient descent. To optimize this model, one needs to know two terms: the "reconstruction error", and the Kullback–Leibler divergence (KL-D). Both terms are derived from the free energy expression of the probabilistic model, and therefore differ depending on the noise distribution and the assumed prior of the data, here referred to as p-distribution. For example, a standard VAE task such as IMAGENET is typically assumed to have a gaussianly distributed noise; however, tasks such as binarized MNIST require a Bernoulli noise. The KL-D from the free energy expression maximizes the probability mass of the q-distribution that overlaps with the p-distribution, which unfortunately can result in mode-seeking behaviour. The "reconstruction" term is the remainder of the free energy expression, and requires a sampling approximation to compute its expectation value. More recent approaches replace Kullback–Leibler divergence (KL-D) with various statistical distances, see "Statistical distance VAE variants" below. == Formulation == From the point of view of probabilistic modeling, one wants to maximize the likelihood of the data x {\displaystyle x} by their chosen parameterized probability distribution p θ ( x ) = p ( x | θ ) {\displaystyle p_{\theta }(x)=p(x|\theta )} . This distribution is usually chosen to be a Gaussian N ( x | μ , σ ) {\displaystyle N(x|\mu ,\sigma )} which is parameterized by μ {\displaystyle \mu } and σ {\displaystyle \sigma } respectively, and as a member of the exponential family it is easy to work with as a noise distribution. Simple distributions are easy enough to maximize, however distributions where a prior is assumed over the latents z {\displaystyle z} results in intractable integrals. Let us find p θ ( x ) {\displaystyle p_{\theta }(x)} via marginalizing over z {\displaystyle z} . p θ ( x ) = ∫ z p θ ( x , z ) d z , {\displaystyle p_{\theta }(x)=\int _{z}p_{\theta }({x,z})\,dz,} where p θ ( x , z ) {\displaystyle p_{\theta }({x,z})} represents the joint distribution under p θ {\displaystyle p_{\theta }} of the observable data x {\displaystyle x} and its latent representation or encoding z {\displaystyle z} . According to the chain rule, the equation can be rewritten as p θ ( x ) = ∫ z p θ ( x | z ) p θ ( z ) d z {\displaystyle p_{\theta }(x)=\int _{z}p_{\theta }({x|z})p_{\theta }(z)\,dz} In the vanilla variational autoencoder, z {\displaystyle z} is usually taken to be a finite-dimensional vector of real numbers, and p θ ( x | z ) {\displaystyle p_{\theta }({x|z})} to be a Gaussian distribution. Then p θ ( x ) {\displaystyle p_{\theta }(x)} is a mixture of Gaussian distributions. It is now possible to define the set of the relationships between the input data and its latent representation as Prior p θ ( z ) {\displaystyle p_{\theta }(z)} Likelihood p θ ( x | z ) {\displaystyle p_{\theta }(x|z)} Posterior p θ ( z | x ) {\displaystyle p_{\theta }(z|x)} Unfortunately, the computation of p θ ( z | x ) {\displaystyle p_{\theta }(z|x)} is expensive and in most cases intractable. To speed up the calculus to make it feasible, it is necessary to introduce a further function to approximate the posterior distribution as q ϕ ( z | x ) ≈ p θ ( z | x ) {\displaystyle q_{\phi }({z|x})\approx p_{\theta }({z|x})} with ϕ {\displaystyle \phi } defined as the set of real values that parametrize q {\displaystyle q} . This is sometimes called amortized inference, since by "investing" in finding a good q ϕ {\displaystyle q_{\phi }} , one can later infer z {\displaystyle z} from x {\displaystyle x} quickly without doing any integrals. In this way, the problem is to find a good probabilistic autoencoder, in which the conditional likelihood distribution p θ ( x | z ) {\displaystyle p_{\theta }(x|z)} is computed by the probabilistic decoder, and the approximated posterior distribution q ϕ ( z | x ) {\displaystyle q_{\phi }(z|x)} is computed by the probabilistic encoder. Parametrize the encoder as E ϕ {\displaystyle E_{\phi }} , and the decoder as D θ {\displaystyle D_{\theta }} . == Evidence lower bound (ELBO) == Like many deep learning approaches that use gradient-based optimization, VAEs require a differentiable loss function to update the network weights through backpropagation. For variational autoencoders, the idea is to jointly optimize the generative model parameters θ {\displaystyle \theta } to reduce the reconstruction error between the input and the output, and ϕ {\displaystyle \phi } to make q ϕ ( z | x ) {\displaystyle q_{\phi }({z|x})} as close as possible to p θ ( z | x ) {\displaystyle p_{\theta }(z|x)} . As reconstruction loss, mean squared error and cross entropy are often used. The Kullback–Leibler divergence D K L ( q ϕ ( z | x ) ∥ p θ ( z | x ) ) {\displaystyle D_{KL}(q_{\phi }({z|x})\parallel p_{\theta }({z|x}))} can be used as a loss function to squeeze q ϕ ( z | x ) {\displaystyle q_{\phi }({z|x})} under p θ ( z | x ) {\displaystyle p_{\theta }(z|x)} . This divergence loss expands to D K L ( q ϕ ( z | x ) ∥ p θ ( z | x ) ) = E z ∼ q ϕ ( ⋅ | x ) [ ln ⁡ q ϕ ( z | x ) p θ ( z | x ) ] = E z ∼ q ϕ ( ⋅ | x ) [ ln ⁡ q ϕ ( z | x ) p θ ( x ) p θ ( x , z ) ] = ln ⁡ p θ ( x ) + E z ∼ q ϕ ( ⋅ | x ) [ ln ⁡ q ϕ ( z | x ) p θ ( x , z ) ] . {\displaystyle {\begin{aligned}D_{KL}(q_{\phi }({z|x})\parallel p_{\theta }({z|x}))&=\mathbb {E} _{z\sim q_{\phi }(\cdot |x)}\left[\ln {\frac {q_{\phi }(z|x)}{p_{\theta }(z|x)}}\right]\\&=\mathbb {E} _{z\sim q_{\phi }(\cdot |x)}\left[\ln {\frac {q_{\phi }({z|x})p_{\theta }(x)}{p_{\theta }(x,z)}}\right]\\&=\ln p_{\theta }(x)+\mathbb {E} _{z\sim q_{\phi }(\cdot |x)}\left[\ln {\frac {q_{\phi }({z|x})}{p_{\theta }(x,z)}}\right].\end{aligned}}} Now, define the evidence lower bound (ELBO): L θ , ϕ ( x ) := E z ∼ q ϕ ( ⋅ | x ) [ ln ⁡ p θ ( x , z ) q ϕ ( z | x ) ] = ln ⁡ p θ ( x ) − D K L ( q ϕ ( ⋅ | x ) ∥ p θ ( ⋅ | x ) ) {\displaystyle L_{\theta ,\phi }(x):=\mathbb {E} _{z\sim q_{\phi }(\cdot |x)}\left[\ln {\frac {p_{\theta }(x,z)}{q_{\phi }({z|x})}}\right]=\ln p_{\theta }(x)-D_{KL}(q_{\phi }({\cdot |x})\parallel p_{\theta }({\cdot |x}))} Maximizing the ELBO θ ∗ , ϕ ∗ = argmax θ , ϕ L θ , ϕ ( x ) {\dis

  Read more →
• 

  Frequent pattern discovery

  Frequent pattern discovery (or FP discovery, FP mining, or Frequent itemset mining) is part of knowledge discovery in databases, Massive Online Analysis, and data mining; it describes the task of finding the most frequent and relevant patterns in large datasets. The concept was first introduced for mining transaction databases. Frequent patterns are defined as subsets (itemsets, subsequences, or substructures) that appear in a data set with frequency no less than a user-specified or auto-determined threshold. == Techniques == Techniques for FP mining include: market basket analysis cross-marketing catalog design clustering classification recommendation systems For the most part, FP discovery can be done using association rule learning with particular algorithms Eclat, FP-growth and the Apriori algorithm. Other strategies include: Frequent subtree mining Structure mining Sequential pattern mining and respective specific techniques. Implementations exist for various machine learning systems or modules like MLlib for Apache Spark.

  Read more →
• 

  Chromosome (evolutionary algorithm)

  A chromosome or genotype in evolutionary algorithms (EA) is a set of parameters which define a proposed solution of the problem that the evolutionary algorithm is trying to solve. The set of all solutions, also called individuals according to the biological model, is known as the population. The genome of an individual consists of one, more rarely of several, chromosomes and corresponds to the genetic representation of the task to be solved. A chromosome is composed of a set of genes, where a gene consists of one or more semantically connected parameters, which are often also called decision variables. They determine one or more phenotypic characteristics of the individual or at least have an influence on them. In the basic form of genetic algorithms, the chromosome is represented as a binary string, while in later variants and in EAs in general, a wide variety of other data structures are used. == Chromosome design == When creating the genetic representation of a task, it is determined which decision variables and other degrees of freedom of the task should be improved by the EA and possible additional heuristics and how the genotype-phenotype mapping should look like. The design of a chromosome translates these considerations into concrete data structures for which an EA then has to be selected, configured, extended, or, in the worst case, created. Finding a suitable representation of the problem domain for a chromosome is an important consideration, as a good representation will make the search easier by limiting the search space; similarly, a poorer representation will allow a larger search space. In this context, suitable mutation and crossover operators must also be found or newly defined to fit the chosen chromosome design. An important requirement for these operators is that they not only allow all points in the search space to be reached in principle, but also make this as easy as possible. The following requirements must be met by a well-suited chromosome: It must allow the accessibility of all admissible points in the search space. Design of the chromosome in such a way that it covers only the search space and no additional areas. so that there is no redundancy or only as little redundancy as possible. Observance of strong causality: small changes in the chromosome should only lead to small changes in the phenotype. This is also called locality of the relationship between search and problem space. Designing the chromosome in such a way that it excludes prohibited regions in the search space completely or as much as possible. While the first requirement is indispensable, depending on the application and the EA used, one usually only has to be satisfied with fulfilling the remaining requirements as far as possible. The evolutionary search is supported and possibly considerably accelerated by a fulfillment as complete as possible. == Examples of chromosomes == === Chromosomes for binary codings === In their classical form, GAs use bit strings and map the decision variables to be optimized onto them. An example for one Boolean and three integer decision variables with the value ranges 0 ≤ D 1 ≤ 60 {\displaystyle 0\leq D_{1}\leq 60} , 28 ≤ D 2 ≤ 30 {\displaystyle 28\leq D_{2}\leq 30} and − 12 ≤ D 3 ≤ 14 {\displaystyle -12\leq D_{3}\leq 14} may illustrate this: Note that the negative number here is given in two's complement. This straight forward representation uses five bits to represent the three values of D 2 {\displaystyle D_{2}} , although two bits would suffice. This is a significant redundancy. An improved alternative, where 28 is to be added for the genotype-phenotype mapping, could look like this: with D 2 = 28 + D 2 ′ = 29 {\displaystyle D_{2}=28+D'_{2}=29} . === Chromosomes with real-valued or integer genes === For the processing of tasks with real-valued or mixed-integer decision variables, EAs such as the evolution strategy or the real-coded GAs are suited. In the case of mixed-integer values, rounding is often used, but this represents some violation of the redundancy requirement. If the necessary precisions of the real values can be reasonably narrowed down, this violation can be remedied by using integer-coded GAs. For this purpose, the valid digits of real values are mapped to integers by multiplication with a suitable factor. For example, 12.380 becomes the integer 12380 by multiplying by 1000. This must of course be taken into account in genotype-phenotype mapping for evaluation and result presentation. A common form is a chromosome consisting of a list or an array of integer or real values. === Chromosomes for permutations === Combinatorial problems are mainly concerned with finding an optimal sequence of a set of elementary items. As an example, consider the problem of the traveling salesman who wants to visit a given number of cities exactly once on the shortest possible tour. The simplest and most obvious mapping onto a chromosome is to number the cities consecutively, to interpret a resulting sequence as permutation and to store it directly in a chromosome, where one gene corresponds to the ordinal number of a city. Then, however, the variation operators may only change the gene order and not remove or duplicate any genes. The chromosome thus contains the path of a possible tour to the cities. As an example the sequence 3 , 5 , 7 , 1 , 4 , 2 , 9 , 6 , 8 {\displaystyle 3,5,7,1,4,2,9,6,8} of nine cities may serve, to which the following chromosome corresponds: In addition to this encoding frequently called path representation, there are several other ways of representing a permutation, for example the ordinal representation or the matrix representation. === Chromosomes for co-evolution === When a genetic representation contains, in addition to the decision variables, additional information that influences evolution and/or the mapping of the genotype to the phenotype and is itself subject to evolution, this is referred to as co-evolution. A typical example is the evolution strategy (ES), which includes one or more mutation step sizes as strategy parameters in each chromosome. Another example is an additional gene to control a selection heuristic for resource allocation in a scheduling tasks. This approach is based on the assumption that good solutions are based on an appropriate selection of strategy parameters or on control gene(s) that influences genotype-phenotype mapping. The success of the ES gives evidence to this assumption. === Chromosomes for complex representations === The chromosomes presented above are well suited for processing tasks of continuous, mixed-integer, pure-integer or combinatorial optimization. For a combination of these optimization areas, on the other hand, it becomes increasingly difficult to map them to simple strings of values, depending on the task. The following extension of the gene concept is proposed by the EA GLEAM (General Learning Evolutionary Algorithm and Method) for this purpose: A gene is considered to be the description of an element or elementary trait of the phenotype, which may have multiple parameters. For this purpose, gene types are defined that contain as many parameters of the appropriate data type as are required to describe the particular element of the phenotype. A chromosome now consists of genes as data objects of the gene types, whereby, depending on the application, each gene type occurs exactly once as a gene or can be contained in the chromosome any number of times. The latter leads to chromosomes of dynamic length, as they are required for some problems. The gene type definitions also contain information on the permissible value ranges of the gene parameters, which are observed during chromosome generation and by corresponding mutations, so they cannot lead to lethal mutations. For tasks with a combinatorial part, there are suitable genetic operators that can move or reposition genes as a whole, i.e. with their parameters. A scheduling task is used as an illustration, in which workflows are to be scheduled that require different numbers of heterogeneous resources. A workflow specifies which work steps can be processed in parallel and which have to be executed one after the other. In this context, heterogeneous resources mean different processing times at different costs in addition to different processing capabilities. Each scheduling operation therefore requires one or more parameters that determine the resource selection, where the value ranges of the parameters depend on the number of alternative resources available for each work step. A suitable chromosome provides one gene type per work step and in this case one corresponding gene, which has one parameter for each required resource. The order of genes determines the order of scheduling operations and, therefore, the precedence in case of allocation conflicts. The exemplary gene type definition of work step 15 with two resources, for which there are four and seven alternatives respectively

  Read more →
• 

  Hard sigmoid

  In artificial intelligence, especially computer vision and artificial neural networks, a hard sigmoid is non-smooth function used in place of a sigmoid function. These retain the basic shape of a sigmoid, rising from 0 to 1, but using simpler functions, especially piecewise linear functions or piecewise constant functions. These are preferred where speed of computation is more important than precision. == Examples == The most extreme examples are the sign function or Heaviside step function, which go from −1 to 1 or 0 to 1 (which to use depends on normalization) at 0. Other examples include the Theano library, which provides two approximations: ultra_fast_sigmoid, which is a multi-part piecewise approximation and hard_sigmoid, which is a 3-part piecewise linear approximation (output 0, line with slope 0.2, output 1).

  Read more →
• 

  Waffles (machine learning)

  Waffles is a collection of command-line tools for performing machine learning operations developed at Brigham Young University. These tools are written in C++, and are available under the GNU Lesser General Public License. == Description == The Waffles machine learning toolkit contains command-line tools for performing various operations related to machine learning, data mining, and predictive modeling. The primary focus of Waffles is to provide tools that are simple to use in scripted experiments or processes. For example, the supervised learning algorithms included in Waffles are all designed to support multi-dimensional labels, classification and regression, automatically impute missing values, and automatically apply necessary filters to transform the data to a type that the algorithm can support, such that arbitrary learning algorithms can be used with arbitrary data sets. Many other machine learning toolkits provide similar functionality, but require the user to explicitly configure data filters and transformations to make it compatible with a particular learning algorithm. The algorithms provided in Waffles also have the ability to automatically tune their own parameters (with the cost of additional computational overhead). Because Waffles is designed for script-ability, it deliberately avoids presenting its tools in a graphical environment. It does, however, include a graphical "wizard" tool that guides the user to generate a command that will perform a desired task. This wizard does not actually perform the operation, but requires the user to paste the command that it generates into a command terminal or a script. The idea motivating this design is to prevent the user from becoming "locked in" to a graphical interface. All of the Waffles tools are implemented as thin wrappers around functionality in a C++ class library. This makes it possible to convert scripted processes into native applications with minimal effort. Waffles was first released as an open source project in 2005. Since that time, it has been developed at Brigham Young University, with a new version having been released approximately every 6–9 months. Waffles is not an acronym—the toolkit was named after the food for historical reasons. == Advantages == Some of the advantages of Waffles in contrast with other popular open source machine learning toolkits include: Waffles automatically takes care of many issues related to data format in order to simplify its tools. Because it is implemented in C++, many of its algorithms are particularly fast. Also, the lack of dependency on any virtual machine makes it easier to deploy in conjunction with other applications. The functionality included in Waffles is very broad, including algorithms for dimensionality reduction, collaborative filtering, visualization, clustering, supervised learning, optimization, linear algebra, data transformation, image and signal processing, policy learning, and sparse matrix operations. == Disadvantages == Although Waffles provides significant breadth, it lacks the depth of many toolkits that focus on a particular area of machine learning. The Weka (machine learning) toolkit, for example, provides many more classification algorithms than Waffles provides. Waffles only has a limited graphical interface.

  Read more →
• 

  Jubatus

  Jubatus is an open-source online machine learning and distributed computing framework developed at Nippon Telegraph and Telephone and Preferred Infrastructure. Its features include classification, recommendation, regression, anomaly detection and graph mining. It supports many client languages, including C++, Java, Ruby and Python. It uses Iterative Parameter Mixture for distributed machine learning. == Notable Features == Jubatus supports: Multi-classification algorithms: Perceptron Passive Aggressive Confidence Weighted Adaptive Regularization of Weight Vectors Normal Herd Recommendation algorithms using: Inverted index Minhash Locality-sensitive hashing Regression algorithms: Passive Aggressive feature extraction method for natural language: n-gram Text segmentation

  Read more →