AI Detector That Colleges Use

AI Detector That Colleges Use — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Circular thresholding

    Circular thresholding

    Circular thresholding is an algorithm for automatic image threshold selection in image processing. Most threshold selection algorithms assume that the values (e.g. intensities) lie on a linear scale. However, some quantities such as hue and orientation are a circular quantity, and therefore require circular thresholding algorithms. The example shows that the standard linear version of Otsu's method when applied to the hue channel of an image of blood cells fails to correctly segment the large white blood cells (leukocytes). In contrast the white blood cells are correctly segmented by the circular version of Otsu's method. == Methods == There are a relatively small number of circular image threshold selection algorithms. The following examples are all based on Otsu's method for linear histograms: (Tseng, Li and Tung 1995) smooth the circular histogram, and apply Otsu's method. The histogram is cyclically rotated so that the selected threshold is shifted to zero. Otsu's method and histogram rotation are applied iteratively until several heuristics involving class size, threshold location, and class variance are satisfied. (Wu et al. 2006) smooth the circular histogram until it contains only two peaks. The histogram is cyclically rotated so that the midpoint between the peaks is shifted to zero. Otsu's method and histogram rotation are applied iteratively until convergence of the threshold. (Lai and Rosin 2014) applied Otsu's method to the circular histogram. For the two class circular thresholding task they showed that, for a histogram with an even number of bins, the optimal solution for Otsu's criterion of within-class variance is obtained when the histogram is split into two halves. Therefore the optimal solution can be efficiently obtained in linear rather than quadratic time. == References and further reading == D.-C. Tseng, Y.-F. Li, and C.-T. Tung, Circular histogram thresholding for color image segmentation in Proc. Int. Conf. Document Anal. Recognit., 1995, pp. 673–676. J. Wu, P. Zeng, Y. Zhou, and C. Olivier, A novel color image segmentation method and its application to white blood cell image analysis in Proc. Int. Conf. Signal Process., vol. 2. 2006, pp. 16–20. Y.K. Lai, P.L. Rosin, Efficient Circular Thresholding, IEEE Trans. on Image Processing 23(3), 992–1001 (2014). doi:10.1109/TIP.2013.2297014

    Read more →
  • Wayve

    Wayve

    Wayve Technologies Ltd is a British autonomous driving technology company focused on developing self-driving vehicle systems through end-to-end deep learning. Founded in 2017 by researchers from the University of Cambridge, Wayve’s approach eschews detailed 3D maps and hand-coded rules, in favor of a self-learning “AI driver” that learns from camera data and driving experience. The London-headquartered startup has garnered significant attention and funding for its visually-based method. == History == Wayve was founded in Cambridge, England, on August 21, 2017, by Amar Shah and Alex Kendall, two machine learning PhD students at the University of Cambridge. Shah initially served as CEO while Kendall was CTO, and the pair set out to develop an unconventional self-driving car system using machine learning at every layer of the driving task. In May 2018, Wayve emerged from stealth mode with backing from early-stage investors. At this time the company had around 10 employees, and its advisory investors included Uber’s Chief Scientist, Zoubin Ghahramani, who shared Wayve’s vision of a learning-centric driving AI. In 2019, Wayve achieved a milestone by training a car to drive autonomously on public roads it had never seen before, using only cameras, a basic GPS map, and end-to-end deep learning control. The company moved its base to London and secured a $20 million Series A funding round in November 2019. This investment enabled Wayve to launch a pilot fleet of autonomous electric vehicles in central London for real-world testing. During these trials, Wayve’s cars (such as retrofitted Jaguar I-Pace SUVs) began navigating the complex, narrow streets of London to prove the system’s ability to adapt to challenging urban scenarios. In 2020, co-founder Amar Shah departed the company, and Alex Kendall assumed the role of CEO. The startup joined the Microsoft for Startups: Autonomous Driving program in 2020, leveraging Microsoft Azure’s cloud computing for training its machine learning models at scale. It also committed to testing exclusively on electric vehicles, and a goal to reduce carbon emissions. In 2021, Wayve entered pilot programs with major UK retailers. It launched a 12-month autonomous delivery trial with supermarket chain Asda, and received a £10 million ($13.6 million) investment from online grocer Ocado Group as part of a partnership to develop self-driving grocery delivery vans. Ocado’s backing gave Wayve access to a fleet of delivery vans for data collection and testing on busy London routes (with human safety drivers present) to train its AI in urban traffic. In 2022, after a successful Series B funding round, the company extended road testing beyond the UK to other regions, and, by 2023, in multiple countries. The company had begun operating in the United States and in continental Europe, in preparation for larger commercial deployments. In 2023, Wayve announced a collaboration with Nissan to integrate Wayve’s AI-driven software into its ProPilot ADAS system, slated to launch in fiscal year 2027. Wayve received strategic investment from Uber, in 2024, to jointly develop autonomous ride-hailing services. The two companies plan to trial a fully driverless robotaxi service in London, supported by a UK government program to accelerate commercial self-driving pilots to as early as 2026. To demonstrate the scalability of its technology, Wayve conducted an “AI-500” roadshow project, driving in dozens of cities across Asia, Europe, and North America using the same AI model. By mid-2025, it had completed autonomous driving demos in 90 cities without prior HD mapping. In April 2025, Wayve opened its first Asian research hub in Japan, with investment by SoftBank, to improve its model’s generalization using local driving data. That year, the company conducted driving tests in over 500 cities in Europe, North America and Japan without city-specific programming. In February 2026, Nissan, Uber and Wayve announced their collaboration on robotaxi development, with the aim of launching a pilot programme in Tokyo by late 2026. Wayve also formed a strategic alliance with Mercedes-Benz and Stellantis on personal vehicle and robotaxi applications. == Financing and investors == Wayve has been backed by a mix of venture capital (VC) firms, corporate investors, and individuals. Its initial seed funding came from funds such as Compound (NYC) and Firstminute Capital (London), as well as Cambridge-based angel investors, in 2018. Academic Pieter Abbeel and Uber’s chief scientist, Zoubin Ghahramani, were early backers. In November 2019, Wayve raised a $20 million Series A led by Eclipse Ventures, with participation from Balderton Capital and other prior investors. The Series A financing was used to fund the company’s first autonomous trials in London, and marked the first time a European self-driving car startup had secured a U.S. VC as lead investor. In October 2021, Ocado Group invested £10 million (approximately $13.6 million) in Wayve as a strategic partner in autonomous grocery delivery. This brought Wayve’s total funding to around $60 million at that time. The Series B round followed in January 2022, when Wayve announced $200 million in new funding led by Eclipse Ventures, with D1 Capital Partners, Moore Strategic Ventures, and Linse Capital. Balderton, Microsoft and Virgin Group joined as strategic backers. Baillie Gifford and Compound also participated; Ocado increased its stake as a strategic investor; and Meta AI head Yann LeCun and Richard Branson also became investors. Wayve’s Series C in May 2024 closed a $1.05 billion, led by Japan’s SoftBank Group. The funding round was the largest-ever for a UK AI company, and included new investor Nvidia, and returning investors Microsoft and Eclipse Ventures, among others. Uber also joined as a stratgic partner and a stakeholder. The Series C round increased Wayve’s total funding raised to about $1.3 billion to date from investors including SoftBank, Microsoft and Nvidia, and lifted Wayve’s valuation into “unicorn” status. In February 2026, Wayve announced a $1.2 billion Series D funding round; later that month, the company reported that $1.5 billion had been raised from, primarily, Mercedes-Benz, Stellantis, Nissan, and existing backers Uber, Microsoft and Nvidia, increasing Wayve's overall valuation to $8.6 billion. == Technology == Wayve’s self-driving approach centers on end-to-end deep learning and a vision-based AI system. Unlike conventional autonomous vehicles that depend on high-definition maps, hand-coded rules, and arrays of expensive lidar sensors, Wayve’s platform learns to drive predominantly using camera data and machine learning algorithms. The company refers to its AI-driven driving software as an “Embodied AI” or AI Driver, emphasizing that the system learns from experience (both real and simulated) to handle complex or novel situations rather than following pre-programmed instructions, not unlike Tesla's approach. The Wayve hardware-agnostic autonomy stack consists of a suite of video cameras, with basic automotive sensors, mounted on the vehicle, and paired with onboard compute units that are powered by GPUs to run the AI models. This vision-only philosophy is similar to Tesla’s Autopilot/FSDB model, but Wayve’s solution is vehicle-agnostic and mapless. Wayve’s strategy is to provide its driving AI as an OEM-ready platform; it plans to license or embed its technology into vehicles made by established automakers rather than build its own cars. Wayve’s development vehicles currently use Nvidia’s Orin system-on-chip as the onboard computer for running the AI model, but CEO Kendall has noted that the software can run on “whatever GPU [an automaker] already has in their vehicles” Wayve has built a cloud infrastructure, largely on Microsoft Azure, to process petabytes of this data, and uses simulation tools (known internally as the “Wayve Infinity” simulator) to synthetically generate and practice rare or dangerous scenarios for the AI to learn from. == Corporate affairs == Wayve is a privately held company headquartered in London, England, with its primary research and development office in the Kings Cross area of London. The company was initially incorporated as Wayve Technologies Ltd in the UK. Wayve has also established a presence in the U.S., in Silicon Valley); in Canada, with a research hub in Vancouver; in Yokohama, Japan; in Leonberg, Germany; and in Herzliya, Israel. The Leadership team includes research scientists and engineers with backgrounds in computer vision, robotics, and automotive systems. President Erez Dagan was hired in 2024, following two decades at Mobileye; chief scientist Jamie Shotton is formerly of Microsoft Research; CEO Alex Kendall, originally from New Zealand with a PhD in computer vision from Cambridge, took over as CEO in 2020 after the departure of his co-founder Amar Shah.

    Read more →
  • Statistical semantics

    Statistical semantics

    In linguistics, statistical semantics applies the methods of statistics to the problem of determining the meaning of words or phrases, ideally through unsupervised learning, to a degree of precision at least sufficient for the purpose of information retrieval. == History == The term statistical semantics was first used by Warren Weaver in his well-known paper on machine translation. He argued that word-sense disambiguation for machine translation should be based on the co-occurrence frequency of the context words near a given target word. The underlying assumption that "a word is characterized by the company it keeps" was advocated by J. R. Firth. This assumption is known in linguistics as the distributional hypothesis. Emile Delavenay defined statistical semantics as the "statistical study of the meanings of words and their frequency and order of recurrence". "Furnas et al. 1983" is frequently cited as a foundational contribution to statistical semantics. An early success in the field was latent semantic analysis. == Applications == Research in statistical semantics has resulted in a wide variety of algorithms that use the distributional hypothesis to discover many aspects of semantics, by applying statistical techniques to large corpora: Measuring the similarity in word meanings Measuring the similarity in word relations Modeling similarity-based generalization Discovering words with a given relation Classifying relations between words Extracting keywords from documents Measuring the cohesiveness of text Discovering the different senses of words Distinguishing the different senses of words Subcognitive aspects of words Distinguishing praise from criticism == Related fields == Statistical semantics focuses on the meanings of common words and the relations between common words, unlike text mining, which tends to focus on whole documents, document collections, or named entities (names of people, places, and organizations). Statistical semantics is a subfield of computational semantics, which is in turn a subfield of computational linguistics and natural language processing. Many of the applications of statistical semantics (listed above) can also be addressed by lexicon-based algorithms, instead of the corpus-based algorithms of statistical semantics. One advantage of corpus-based algorithms is that they are typically not as labour-intensive as lexicon-based algorithms. Another advantage is that they are usually easier to adapt to new languages or noisier new text types from e.g. social media than lexicon-based algorithms are. However, the best performance on an application is often achieved by combining the two approaches.

    Read more →
  • Willy's Chocolate Experience

    Willy's Chocolate Experience

    Willy's Chocolate Experience was an unlicensed event based on Charlie and the Chocolate Factory that took place in Glasgow, Scotland, in February 2024. The event was promoted as an immersive and interactive family experience, illustrated on a promotional website with "dreamlike" AI-generated images. Once it was discovered that the event was held in a sparsely decorated warehouse, many customers complained, and the police were called to the venue. The event went viral on the Internet and attracted worldwide media attention. The event drew comparisons to the 2008 Lapland New Forest controversy, the 2014 Tumblr fan convention DashCon, and Billy McFarland's 2017 Fyre Festival. == Background and advertising == The event was stated to take place over the weekend of 24–25 February 2024. Promotional material advertised "stunning and intricately designed settings inspired by Roald Dahl's timeless tale" and "an array of delectable treats scattered throughout the experience". Both the website and promotional material used poor-quality AI-generated images, which included several spelling errors such as "cartchy tuns" and "a pasadise of sweet teats" and nonsensical words such as "catgacating" and "exarserdray". Tickets cost up to £35 per person. While the event was being promoted in early February, a Reddit user who saw Facebook advertisements suspected it to be a scam and was surprised that people were apparently buying tickets based solely on AI-generated images. The event was organised by House of Illuminati, a company registered to Billy Coull which claimed to offer "unparalleled immersive experiences". An investigation by Third Force News conducted after the event described Coull's previous "murky involvement in the charity sector." Coull had previously registered several other companies and claimed to work as a "consultant" for the now-defunct brand Empowerity, formerly known as the charity Gowanbank Community Hub. In 2021, Gowanbank was forced to remove claims of a £95-per-ticket fundraising "gala" at DoubleTree Glasgow which had been falsely advertised to feature TV personalities and performers including Gok Wan and Joe Black. Coull had claimed to be a doctor with a fake degree from a false university that provided "metaphysical degrees", and had attempted to use the charity to win the 2022 Glasgow City Council election in the seat of Greater Pollok, though he never registered for the election. In the summer of 2023, he independently published 17 AI-generated books on various topics, including vaccine conspiracy theories. Rolling Stone concluded that House of Illuminati's websites and event descriptions were likely written by an AI chatbot, such as ChatGPT. Three actors were hired to portray "Willy McDuff", a character based on Willy Wonka. One of them, Paul Connell, said that the cast were given one day to learn the script. Another actor playing Willy McDuff was 18-year-old Michael Archibald; the experience was his first ever acting job, and he was given the script at 6 pm on Friday before the event began on Saturday. Kirsty Paterson, an actress who played one of the Oompa-Loompas (called "Wonkidoodles" in the script), said that the job offer had been posted on Indeed.com and offered £500 for two days of work. The day before the event, the actors attended a dress rehearsal at the sparsely decorated venue. They were told that others would be working through the night on the production. When they returned on the day of the event, the venue was in the same condition. Paterson was given her costume an hour before the event opened, saying that "We were just handed an Amazon box that probably arrived that morning." == Script == The script for the event is titled Wonkidoodles at McDuff's Chocolate Factory: A Script, and describes Willy McDuff leading an audience through the Garden of Enchantment and the Twilight Tunnel. Once there, they are confronted by a character called The Unknown, described as "an evil chocolate maker who lives in the walls" who seeks to steal the magical "Anti-Graffiti Gobstopper" from McDuff's Imagination Lab. The gobstopper is "a sweet so powerful, it can make any room sparkle without lifting a finger". McDuff defeats The Unknown by amplifying the power of the gobstopper and causing his enemy to be "gently swept up by a robotic vacuum, humorously ending the confrontation". The script was unusual in that it included stage directions for the audience, and descriptions of their reactions. Connell described it as "15 pages of AI-generated gibberish of me just monologuing these mad things", and compared the vacuum cleaner plot point to that of the Nintendo video game Luigi's Mansion. Interviewed after the event, Coull claimed to have written the script himself, using AI only to "check spelling, grammar, and continuity" as he said he had dyslexia. == Event == The event was held at the Box Hub Warehouse event space in Whiteinch, an industrial area of Glasgow. Customers described the venue as "little more than an abandoned, empty warehouse", with set dressings including a small bouncy castle, AI-generated backdrop images pinned to some of the walls, and props which were "strewn about on bare concrete floors". The venue's windows were dirty and its air conditioning systems were left exposed. Paterson has stated that by the time she saw the venue, she had already signed her contract and "didn't want to disappoint the kids", and thus chose to proceed with the work. The Unknown was played by a 16-year-old actress named Felicia Dawkins, who wore a silver mask and a black cloak. Young children were frightened by the character, who appeared from behind a large rectangular mirror. Despite the script calling for The Unknown to be defeated with a vacuum cleaner, no such prop was provided, and actors were instead asked to improvise. Connell said that he and other employees were told to give each child "two jelly beans and a quarter of a cup of lemonade", although the limited supply of jelly beans quickly ran out. Paterson and another "Wonkidoodle" actress, Jenny Fogarty, said that after the first three 45-minute performances, the cast were told to abandon the script and instead let guests walk through the venue, a process that Paterson said took "about two minutes". The character of The Unknown, previously introduced as the main antagonist, was now "scaring children for no reason". One of the actors playing McDuff improvised the idea that children should pull a "silly face" at The Unknown to scare them away, but Dawkins said that, in other cases, she "just had to awkwardly walk back to my corner". Connell was told he would be given a 15-minute break every 45 minutes, but on the day of the event, he played Willy McDuff for three and a half hours without a break. After returning from a lunch break, Connell encountered a crowd of customers demanding refunds from Coull, and the other actors were unsure what to do next. After being told that the event was now cancelled halfway through its opening day, the actors left and went to a pub. Upon returning to the venue some time later, Connell said that he felt "the threat of violence had become quite high" and that there were two police vans and two squad cars at the scene. == Customer reviews and response == Willy's Chocolate Experience was widely criticised by those who attended it, many of whom demanded refunds. One customer, who had driven with his children for two hours to reach the event, described it as an "absolute con". Other visitors who arrived after the event was closed and were not informed of its cancellation requested compensation for wasted rail fares. Following the event's cancellation, Coull offered to refund 850 people, a statement repeated by the event's Facebook page. Some Facebook users stated that they had received their money back. Paterson and Fogarty stated that they only received half of their paycheque. Box Hub, the organisation that had rented the warehouse to House of Illuminati, issued an apology on House of Illuminati's behalf, stating that they "either have no regards for the families and young children they have disappointed or are too embarrassed to comment", and offered to provide a venue free of charge for those who attended the event. House of Illuminati later stated that they would not host any future events. Coull deleted his LinkedIn profile, his YouTube channel, and his personal website in response to the controversy. A few days after the event, Connell said he felt that Coull was "probably one of the most disliked people in Glasgow right now". In an interview with The Sunday Times, Coull apologised for how the event turned out, saying he would accept responsibility. == Fundraising == In an interview with Wired magazine, Connell stated that he and the other actors were working with parents to provide a free show for the children who attended. Some items from the event were later auctioned for charity. The venue auctioned the leftover hand-written "even

    Read more →
  • Optical sorting

    Optical sorting

    Optical sorting (sometimes called digital sorting) is the automated process of sorting solid products using cameras and/or lasers. Depending on the types of sensors used and the software-driven intelligence of the image processing system, optical sorters can recognize an object's color, size, shape, structural properties and chemical composition. The sorter compares objects to user-defined accept/reject criteria to identify and remove defective products and foreign material (FM) from the production line, or to separate product of different grades or types of materials. Optical sorters are in widespread use in the food industry worldwide, with the highest adoption in processing harvested foods such as potatoes, fruits, vegetables and nuts where it achieves non-destructive, 100 percent inspection in-line at full production volumes. The technology is also used in pharmaceutical manufacturing and nutraceutical manufacturing, tobacco processing, waste recycling and other industries. Compared to manual sorting, which is subjective and inconsistent, optical sorting helps improve product quality, maximize throughput and increase yields while reducing labor costs. == History == Optical sorting is an idea that first came out of the desire to automate industrial sorting of agricultural goods like fruits and vegetables. Before automated optical sorting technology was conceived in the 1930s, companies like Unitec were producing wooden machinery to assist in the mechanical sorting of fruit processing. In 1931, a company known as “the Electric Sorting Company” was incorporated and began the creation of the world’s first color sorters, which were being installed and used in Michigan’s bean industry by 1932. In 1937, optical sorting technology had advanced to allow for systems based on a two-color principle of selection. The next few decades saw the installation of new and improved sorting mechanisms, like gravity feed systems and the implementation of optical sorting in more agricultural industries. In the late 1960s, optical sorting began to be implemented to new industries beyond agriculture, like the sorting of ferrous and non-ferrous metals. By the 1990s, optical sorting was being used heavily in the sorting of solid wastes. With the large technological revolution happening in the late 1990s and early 2000s, optical sorters were being made more efficient via the implementation of new optical sensors, like CCD, UV, and IR cameras. Today, optical sorting is used in a wide variety of industries and, as such, is implemented with a varying selection of mechanisms to assist in that specific sorter’s task. == The sorting system == In general, optical sorters feature four major components: the feed system, the optical system, image processing software, and the separation system. The objective of the feed system is to spread products into a uniform monolayer so products are presented to the optical system evenly, without clumps, at a constant velocity. The optical system includes lights and sensors housed above and/or below the flow of the objects being inspected. The image processing system compares objects to user-defined accept/reject thresholds to classify objects and actuate the separation system. The separation system — usually compressed air for small products and mechanical devices for larger products, like whole potatoes — pinpoints objects while in-air and deflects the objects to remove into a reject chute while the good product continues along its normal trajectory. The ideal sorter to use depends on the application. Therefore, the product's characteristics and the user's objectives determine the ideal sensors, software-driven capabilities and mechanical platform. == Sensors == Optical sorters require a combination of lights and sensors to illuminate and capture images of the objects so the images can be processed. The processed images will determine if the material should be accepted or rejected. There are camera sorters, laser sorters and sorters that feature a combination of the two on one platform. Lights, cameras, lasers and laser sensors can be designed to function within visible light wavelengths as well as the infrared (IR) and ultraviolet (UV) spectrums. The optimal wavelengths for each application maximize the contrast between the objects to be separated. Cameras and laser sensors can differ in spatial resolution, with higher resolutions enabling the sorter to detect and remove smaller defects. === Cameras === Monochromatic cameras detect shades of gray from black to white and can be effective when sorting products with high-contrast defects. Sophisticated color cameras with high color resolution are capable of detecting millions of colors to better distinguish more subtle color defects. Trichromatic color cameras (also called three-channel cameras) divide light into three bands, which can include red, green and/or blue within the visible spectrum as well as IR and UV. The interaction of different materials with parts of the electromagnetic spectrum make these contrasts more evident than how they appear to the naked human eye. Coupled with intelligent software, sorters that feature cameras are capable of recognizing each object's color, size and shape; as well as the color, size, shape and location of a defect on a product. Some intelligent sorters even allow the user to define a defective product based on the total defective surface area of any given object. === Lasers === While cameras capture product information based primarily on material reflectance, lasers and their sensors are able to distinguish a material's structural properties along with their color. This structural property inspection allows lasers to detect a wide range of organic and inorganic foreign material such as insects, glass, metal, sticks, rocks and plastic; even if they are the same color as the good product. Lasers can be designed to operate within specific wavelengths of light; whether on the visible spectrum or beyond. For example, lasers can detect chlorophyll by stimulating fluorescence using specific wavelengths; which is a process that is very effective for removing foreign material from green vegetables. === Camera/laser combinations === Sorters equipped with cameras and lasers on one platform are generally capable of identifying the widest variety of attributes. Cameras are often better at recognizing color, size and shape while laser sensors identify differences in structural properties to maximize foreign material detection and removal. === Hyperspectral Imaging === Driven by the need to solve previously impossible sorting challenges, a new generation of sorters that feature multispectral and hyperspectral imaging Optical Sorters. Like trichromatic cameras, multispectral and hyperspectral cameras collect data from the electromagnetic spectrum. Unlike trichromatic cameras, which divide light into three bands, hyperspectral systems can divide light into hundreds of narrow bands over a continuous range that covers a vast portion of the electromagnetic spectrum. This opens the door for more detailed analysis that leads to a more consistent product. Using IR alone might detect some defects, but combining it with a broader range of the spectrum makes it more effective. Compared to the three data points per pixel collected by trichromatic cameras, hyperspectral cameras can collect hundreds of data points per pixel, which are combined to create a unique spectral signature (also called a fingerprint) for each object. When complemented by capable software intelligence, a hyperspectral sorter processes those fingerprints to enable sorting on the chemical composition of the product. This is an emerging area of chemometrics. == Software-driven intelligence == Once the sensors capture the object's response to the energy source, image processing is used to manipulate the raw data. The image processing extracts and categorizes information about specific features. The user then defines accept/reject thresholds that are used to determine what is good and bad in the raw data flow. The art and science of image processing lies in developing algorithms that maximize the effectiveness of the sorter while presenting a simple user-interface to the operator. Object-based recognition is a classic example of software-driven intelligence. It allows the user to define a defective product based on where a defect lies on the product and/or the total defective surface area of an object. It offers more control in defining a wider range of defective products. When used to control the sorter's ejection system, it can improve the accuracy of ejecting defective products. This improves product quality and increases yields. New software-driven capabilities are constantly being developed to address the specific needs of various applications. As computing hardware becomes more powerful, new software-driven advancements become possible. Some of these advancements enhance the effectivene

    Read more →
  • Evolutionary computation

    Evolutionary computation

    Evolutionary computation (EC) from computer science is a family of algorithms for global optimization inspired by biological evolution, and a subfield of computational intelligence and soft computing studying these algorithms. In technical terms, they are a family of population-based trial and error problem solvers with a metaheuristic or stochastic optimization character. In evolutionary computation, an initial set of candidate solutions is generated and iteratively updated. Each new generation is produced by stochastically removing less desired solutions, and introducing small random changes as well as, depending on the method, mixing parental information. In biological terminology, a population of solutions is subjected to natural selection (or artificial selection), mutation and possibly recombination. These biological functions serve as role models for the genetic operators - mutation, crossover, and selection - used in the EC procedures. As a result, the population will gradually evolve to increase in fitness, in this case the chosen fitness function of the algorithm. Evolutionary computation techniques can produce highly optimized solutions in a wide range of problem settings, making them popular in computer science. Many variants and extensions exist, suited to more specific families of problems and data structures. Evolutionary computation is also sometimes used in evolutionary biology as an in silico experimental procedure to study common aspects of general evolutionary processes. == History == The concept of mimicking evolutionary processes to solve problems originates before the advent of computers, such as when Alan Turing proposed a method of genetic search in 1948 . Turing's B-type u-machines resemble primitive neural networks, and connections between neurons were learnt via a sort of genetic algorithm. His P-type u-machines resemble a method for reinforcement learning, where pleasure and pain signals direct the machine to learn certain behaviors. However, Turing's paper went unpublished until 1968, and he died in 1954, so this early work had little to no effect on the field of evolutionary computation that was to develop. Evolutionary computing as a field began in earnest in the 1950s and 1960s. There were several independent attempts to use the process of evolution in computing at this time, which developed separately for roughly 15 years. Three branches emerged in different places to attain this goal: evolution strategies, evolutionary programming, and genetic algorithms. A fourth branch, genetic programming, eventually emerged in the early 1990s. These approaches differ in the method of selection, the permitted mutations, and the representation of genetic data. By the 1990s, the distinctions between the historic branches had begun to blur, and the term 'evolutionary computing' was coined in 1991 to denote a field that exists over all four paradigms. In 1962, Lawrence J. Fogel initiated the research of Evolutionary Programming in the United States, which was considered an artificial intelligence endeavor. In this system, finite state machines are used to solve a prediction problem: these machines would be mutated (adding or deleting states, or changing the state transition rules), and the best of these mutated machines would be evolved further in future generations. The final finite state machine may be used to generate predictions when needed. The evolutionary programming method was successfully applied to prediction problems, system identification, and automatic control. It was eventually extended to handle time series data and to model the evolution of gaming strategies. In 1964, Ingo Rechenberg and Hans-Paul Schwefel introduce the paradigm of evolution strategies in Germany. Since traditional gradient descent techniques produce results that may get stuck in local minima, Rechenberg and Schwefel proposed that random mutations (applied to all parameters of some solution vector) may be used to escape these minima. Child solutions were generated from parent solutions, and the more successful of the two was kept for future generations. This technique was first used by the two to successfully solve optimization problems in fluid dynamics. Initially, this optimization technique was performed without computers, instead relying on dice to determine random mutations. By 1965, the calculations were performed wholly by machine. John Henry Holland introduced genetic algorithms in the 1960s, and it was further developed at the University of Michigan in the 1970s. While the other approaches were focused on solving problems, Holland primarily aimed to use genetic algorithms to study adaptation and determine how it may be simulated. Populations of chromosomes, represented as bit strings, were transformed by an artificial selection process, selecting for specific 'allele' bits in the bit string. Among other mutation methods, interactions between chromosomes were used to simulate the recombination of DNA between different organisms. While previous methods only tracked a single optimal organism at a time (having children compete with parents), Holland's genetic algorithms tracked large populations (having many organisms compete each generation). By the 1990s, a new approach to evolutionary computation that came to be called genetic programming emerged, advocated for by John Koza among others. In this class of algorithms, the subject of evolution was itself a program written in a high-level programming language (there had been some previous attempts as early as 1958 to use machine code, but they met with little success). For Koza, the programs were Lisp S-expressions, which can be thought of as trees of sub-expressions. This representation permits programs to swap subtrees, representing a sort of genetic mixing. Programs are scored based on how well they complete a certain task, and the score is used for artificial selection. Sequence induction, pattern recognition, and planning were all successful applications of the genetic programming paradigm. Many other figures played a role in the history of evolutionary computing, although their work did not always fit into one of the major historical branches of the field. The earliest computational simulations of evolution using evolutionary algorithms and artificial life techniques were performed by Nils Aall Barricelli in 1953, with first results published in 1954. Another pioneer in the 1950s was Alex Fraser, who published a series of papers on simulation of artificial selection. As academic interest grew, dramatic increases in the power of computers allowed practical applications, including the automatic evolution of computer programs. Evolutionary algorithms are now used to solve multi-dimensional problems more efficiently than software produced by human designers, and also to optimize the design of systems. == Techniques == Evolutionary computing techniques mostly involve metaheuristic optimization algorithms. Broadly speaking, the field includes: Agent-based modeling Ant colony optimization Particle swarm optimization Swarm intelligence Artificial immune systems Artificial life Digital organism Cultural algorithms Differential evolution Dual-phase evolution Estimation of distribution algorithm Evolutionary algorithm Genetic algorithm Evolutionary programming Genetic programming Gene expression programming Grammatical evolution Evolution strategy Learnable evolution model Learning classifier system Memetic algorithms Neuroevolution Self-organization such as self-organizing maps, competitive learning Over recent years many dubious algorithms have been proposed, that are often just copies of existing algorithms (frequently Particle Swarm Optimization), where only the metaphor changed, but the algorithm itself is not new at all. A thorough catalogue with many of these dubious algorithms has been published in the Evolutionary Computation Bestiary. It is also important to note that many of these dubiously 'novel' algorithms have poor experimental validation. == Evolutionary algorithms == Evolutionary algorithms form a subset of evolutionary computation in that they generally only involve techniques implementing mechanisms inspired by biological evolution such as reproduction, mutation, recombination and natural selection. Candidate solutions to the optimization problem play the role of individuals in a population, and the cost function determines the environment within which the solutions "live" (see also fitness function). Evolution of the population then takes place after the repeated application of the above operators. In this process, there are two main forces that form the basis of evolutionary systems: Recombination (e.g. crossover) and mutation create the necessary diversity and thereby facilitate novelty, while selection acts as a force increasing quality. Many aspects of such an evolutionary process are stochastic. Changed pieces of information due to recombination and mutati

    Read more →
  • Stanhope Demonstrator

    Stanhope Demonstrator

    The Stanhope Demonstrator was the first machine to solve problems in logic. It was designed by Charles Stanhope, 3rd Earl Stanhope to demonstrate consequences in logic symbolically. The first model was constructed in 1775. It consisted of two slides coloured red and gray mounted in a square brass frame. This could be used to demonstrate the solution to a syllogistic type of problem in which objects might have two different properties and the question was how many would have both properties. Scales marked zero to ten were used to set the numbers or proportions of objects with the two properties. This form of inference anticipated the numerically definite syllogism which Augustus De Morgan laid out in his book, Formal Logic, in 1847. == Construction == The device was a brass plate about four inches square which was mounted on a piece of mahogany which was three-quarters of an inch thick. There was an opening with a depression in the wood about one and a half inches square and half an inch deep. This opening was called the holon, meaning "whole", and represented the full set of objects under consideration. A slide of red translucent glass could be inserted from the right across the holon. A slide of gray wood could be slid under the red slide. When the device was used for the "Rule for the Logic of Certainty", the gray slider was inserted from the left. When it was used for the "Rule for the Logic of Probability", the gray slider was inserted from above. The red and the gray sliders represented the two affirmative propositions which were being combined. Stanhope called these ho and los. At least four of the devices with this square style were built. In 1879, Robert Harley wrote that he had one which he had been given by Stanhope's great-grandson, Arthur, who had kept one. The other two were owned by Henry Prevost Babbage – the son of Charles Babbage, who continued his work on the Analytical Engine. One of the devices was donated to the Science Museum, London by the last Earl in 1953. Other styles, such as circular models, were constructed, but these were less convenient.

    Read more →
  • A Fire Upon the Deep

    A Fire Upon the Deep

    A Fire Upon the Deep is a 1992 science fiction novel by American writer Vernor Vinge. It is a space opera involving superhuman intelligences, aliens, variable physics, space battles, love, betrayal, genocide, and a communication medium resembling Usenet. A Fire Upon the Deep won the Hugo Award in 1993, sharing it with Doomsday Book by Connie Willis. Besides the normal print book editions, the novel was also included on a CD-ROM sold by ClariNet Communications along with the other nominees for the 1993 Hugo awards. The CD-ROM edition included numerous annotations by Vinge on his thoughts and intentions about different parts of the book, and was later released as a standalone e-book. It has a loose prequel, A Deepness in the Sky, from 1999, and a direct sequel, The Children of the Sky, from 2012. == Setting == The novel is set in various locations within the Milky Way. The galaxy is divided into four concentric volumes called the "Zones of Thought"; it is not clear to the novel's characters whether this is a natural phenomenon or an artificially created one. Each Zone has fundamental differences in basic physical laws. One of the main consequences of these differences is the effect on intelligence. Artificial intelligence and automation is most directly affected, in that advanced hardware and software from the Beyond or the Transcend will work less and less well as a ship descends towards the Unthinking Depths. Biological intelligence is affected to a lesser degree. The four zones are spoken of in terms of "low" to "high" as follows: The Unthinking Depths are the innermost zone, surrounding the Galactic Center. In it, only minimal forms of intelligence, biological or otherwise, are possible. This means that any ship straying into the Depths will be stranded, effectively permanently. Even if the crew did not die immediately—and some forms of life native to "higher" Zones would likely do so—they would be rendered incapable of even human intelligence, leaving them unable to operate their ship in any meaningful way. Surrounding the Depths is the Slow Zone or Slowness. "Old Earth" is in this Zone, although Earth plays no significant role in the story. Biological intelligence is possible in "the Slowness", but not true, sentient, artificial intelligence. Faster than light travel (FTL) is impossible in the Slow Zone. Faster-than-light communication is impossible into or out of the Slow Zone. As the boundaries of the Zones are subject to change, accidental entry into the Slow Zone is a major hazard at the "Bottom" of the Beyond. Starships which operate near the Beyond/Slow Zone border often have an auxiliary Bussard ramjet drive, so that if they accidentally stray into the Slow Zone, they will at least have a backup (sub-light) drive to try to reach the Beyond. Such ships also tend to include "coldsleep" equipment, as it is likely that any such return will still take many lifetimes for most species. The next layer outward is the Beyond, within which artificial intelligence, FTL travel, and FTL communication are possible. All human civilizations in the Beyond are descended from a single ethnic Norwegian group. The original settlement of this group is known as Nyjora; other human settlements in the Beyond include Straumli Realm and Sjandra Kei. In the Beyond, FTL travel is accomplished by making many small "jumps" across space, with the efficiency of the drive increasing the farther a ship travels from the galactic core. The Beyond is not a homogeneous zone; it includes the "High Beyond", "Middle Beyond", and the "Bottom of the Beyond", depending on distance from the galactic core. The Beyond is populated by a very large number of interstellar and intergalactic civilizations which are linked by an FTL communication network, "the Net", sometimes cynically called the "Net of a Million Lies". The Net is depicted as working much like the Usenet network in the early 1990s, with transcripts of messages containing header and footer information as one would find in such forums. The outermost layer, containing the galactic halo, is the Transcend, within which incomprehensible, superintelligent beings dwell. When a "Beyonder" civilization reaches the point of technological singularity, it can "Transcend", becoming a "Power". Such Powers always seem to relocate to the Transcend, seemingly necessarily, where they become engaged in activities which are entirely mysterious to those in the Beyond. == Plot == An expedition from Straumli Realm, a human civilization in the High Beyond, investigates a newly discovered data archive in the Low Transcend. The expedition's facility, High Lab, is gradually compromised by a superintelligence that is accidentally awoken by the researchers. This superintelligence is later known as the Blight. Shortly before the Blight's final "flowering", two self-aware entities, created similarly to the Blight, plot to aid the humans before the Blight can gain its full powers. Finally recognizing their danger, the High Lab researchers attempt to flee in two ships. The Blight destroys one ship; a second ship, carrying many High Lab children in coldsleep boxes, escapes. This ship lands on a distant planet at the Bottom of the Beyond. The planet is occupied by dog-like creatures, dubbed "Tines", who live in packs as group minds. The Tines have a level of technology comparable to the human Middle Ages. Upon landing, however, the two surviving adults, Arne and Sjana Olnsdot, are ambushed and killed by Tine fanatics known as Flenserists, in whose realm they have landed. The Flenserists capture their children, Jefri and Johanna. Johanna is rescued by a Tine named Peregrine and taken to a neighboring kingdom ruled by Woodcarver. A distress signal from the Straumli ship eventually reaches Relay, a major information provider for the Net. A Transcendent being named "Old One" contacts Relay, seeking information about the Blight and the humans who released it. Old One then reconstitutes a human man named Pham Nuwen from the wreckage of a spaceship to act as its agent. Pham remains unsure if he is a construct or if his memories are real. Ravna Bergsndot, the only human Relay employee, traces the Straumli ship's signal to the Tines' world and persuades her employer to investigate. Ravna contracts the merchant vessel Out of Band II to transport her and Pham. The ship is owned by two Skroderiders, Blueshell and Greenstalk. Before the mission is launched, the Blight launches a surprise attack on Relay and kills Old One. As Old One dies, it downloads its anti-Blight information into Pham. Pham, Ravna and the Skroderiders barely escape Relay's destruction in the Out of Band II. During their journey to Tine's World, Ravna communicates with Jefri. Jefri is manipulated to believe that Woodcarver is his enemy. The Flenserist leaders, Steel and Tyrathect, use Ravna's information to develop advanced technology such as cannon and radio communication. Meanwhile, Johanna and the knowledge stored in her dataset device help Woodcarver rapidly develop as well. The Blight expands, taking over several civilizations, brainwashing their populations, and seizing archives in the Beyond. On the Net, some claim that humans are the means by which the Blight is able to spread. Anti-human fanatics destroy the entire civilization of Sjandra Kei, which is Ravna's home world. The Out of Band II is pursued by three fleets: anti-human fanatics, survivors from Sjandra Kei, and a shadow fleet controlled by the Blight. During the pursuit, Ravna and Pham learn that every member of the Skroderider species can be subverted by the Blight; this drives a wedge between the crew members. Ships from Sjandra Kei sacrifice themselves to delay the Blight and the anti-human ships, allowing the Out of Band II to reach Tine's World before the Blight. When the Out of Band II arrives at Tine's World, the humans ally with Woodcarver to defeat the Flenserists and rescue Jefri. Blueshell sacrifices himself to rescue Jefri. Pham then initiates an anti-Blight Countermeasure, which was aboard the humans' ship. The Countermeasure extends the Slow Zone outward by thousands of light years. This envelops and destroys the Blight, but results in the destruction of thousands of civilizations and trillions of deaths. The humans are stranded on the Tines' World, now in the depths of the Slow Zone. Activating the Countermeasure proves fatal to Pham, but before he dies, the remnant of Old One reveals to him that, although his body is a reconstruction, his memories are indeed real. == Related works == Vinge first used the concepts of "Zones of Thought" in a 1988 novella The Blabber, which occurs after Fire. Vinge's novel A Deepness in the Sky (1999) is a prequel to A Fire Upon the Deep set 20,000 years earlier and featuring Pham Nuwen. Vinge's The Children of the Sky, "a near-term sequel to A Fire Upon the Deep", set ten years later, was released in October 2011. Vinge's former wife, Joan D. Vinge, has also written s

    Read more →
  • 3D-Coat

    3D-Coat

    3DCoat is a commercial digital sculpting program from Pilgway designed to create free-form organic and hard surfaced 3D models, with tools which enable users to sculpt, add polygonal topology (automatically or manually), create UV maps (automatically or manually), texture the resulting models with natural painting tools, and render static images or animated "turntable" movies. The program can also be used to modify imported 3D models from a number of commercial 3D software products by means of plugins called Applinks. Imported models can be converted into voxel objects for further refinement and for adding high resolution detail, complete UV unwrapping and mapping, as well as adding PBR textures for displacement, bump maps, specular and diffuse color maps. A live connection to a chosen external 3D application can be established through the Applink pipeline, allowing for the transfer of model and texture information. 3DCoat specializes in voxel sculpting and polygonal sculpting using dynamic patch tessellation technology and polygonal sculpting tools. It includes "auto-retopology", a proprietary skinning algorithm which generates a polygonal mesh skin over any voxel sculpture, composed primarily of quadrangles.

    Read more →
  • Fragile Dreams: Farewell Ruins of the Moon

    Fragile Dreams: Farewell Ruins of the Moon

    Fragile Dreams: Farewell Ruins of the Moon (フラジール ~さよなら月の廃墟~, Furajīru: Sayonara Tsuki no Haikyo; known in Japan as Fragile) is an action role-playing game for the Wii developed by Namco Bandai Games in co-operation with Tri-Crescendo. The game was released by Namco Bandai Games in Japan on January 22, 2009. It was later published by Xseed Games in North America on March 16, 2010, and in Europe by Rising Star Games on March 19, 2010, followed by its release in Australia on April 1, 2010. == Gameplay == In Fragile Dreams, the player character, Seto, must traverse the ruins of Tokyo and the surrounding areas, fighting off ghosts that lurk within these ruins. The game's heads-up display includes a mini-map and HP gauge for Seto's location and health, respectively. Seto will fall unconscious if his HP reaches zero, resulting in a game over. The player controls Seto from a third-person perspective with the Wii Remote and Nunchuk. Seto can use his flashlight (controlled by the Wii Remote pointer) to illuminate his surroundings or solve puzzles and interact with the environment. When searching for certain objectives or hidden enemies, pointing Seto's light in their direction picks up and plays their sounds through the Wii Remote's mini speaker. The Wii Nunchuk, meanwhile, directly controls Seto's movement: aside of basic movement, he can crouch to hide and crawl through small spaces. Seto will often come across damaged floors, which require slow movement (and for heavily damaged floors, crouching) to cross without falling through. As Seto, the player can use weapons found throughout the world to fight off ghosts, ranging from slingshots and golf clubs to crossbows and katanas. Each weapon can only take a certain amount of use: once a weapon reaches its limit, it will break after battle. The player can also find other usable and collectable items in the field, marked with fireflies. The player can only save their game by resting at small fire pits scattered throughout the world: used fire pits are marked with a bonfire. The player can also examine and identify Mystery Items, organize their inventory, as well as after encountering the Merchant, buy and sell items. As stated by the producer of the game, Kentarō Kawashima, Fragile Dreams is not strictly a survival horror: rather, its story focuses on human drama. In Fragile Dreams, aside of the main story, the player can find and examine objects and graffiti throughout the world. Objects called memory items (ranging from origami and stones to cell phones and books) hold the memories of their former owners (only accessible at bonfires), while the graffiti contains messages only seen by pointing at them in first-person. By examining these messages, the player can piece together hints to the game's backstory. == Story == === Setting and characters === Fragile Dreams is set in a post-apocalyptic version of Earth in the near-future. Almost all the world's population has vanished, leaving the surviving buildings and structures abandoned. The game is set in and near the ruins of Tokyo, Japan, where the event that nearly wiped out humanity may have originated. The protagonist, Seto, is a 15-year-old boy who searches the world for other living humans. He encounters Ren, a silver-haired girl who often leaves behind large, cryptic drawings. Other characters include: Sai, the ghost of a young woman; Crow, a mischievous and straightforward amnesiac boy; Personal Frame (P.F.), a portable computer who loves having conversations more than anything else; Chiyo, the ghost of a little girl; and the Merchant, a mysterious yet merry man who trades various goods. The game's host of enemies mainly consist of ghosts, but also include humanoid robots and security proxies. The main antagonist, Shin, is the AI of a scientist who considers speech to be an inferior means of communication. Various memory items include a greater set of characters, each giving hints to the game's backstory. === Plot === At the end of Seto's fifteenth summer, his grandfather dies. Seto buries him in front of their home, an old observatory, and that from then on he became "truly alone". At night, he searches for anything the old man had left for him and discovers a letter, along with a strange blue stone in a locket. Suddenly, a mask-like ghost appears and attacks Seto. After driving the creature off, Seto reads the old man's letter, who tells him to "reach a tall red tower" east of the observatory, where he might find other survivors. After departing for the tower, Seto reaches an old subway entrance in the Azabudai district and finds Ren sitting on a collapsed pillar, singing to the stars. He accidentally startles her and the frightened Ren flees into the subway station: getting over the shock of meeting another person, Seto follows her. While searching the station, he discovers a Personal Frame, who guides him towards Ren. Unfortunately, just as they reach the exit, P.F.'s battery dies out: Seto buries the device, keeping a screw from it in his locket. From the underground, Seto finds himself at an abandoned amusement park and encounters Crow, who steals Seto's locket. After a long chase across the park and another encounter with the masked ghost, Crow returns Seto's locket and directs him to a hotel nearby, where he saw a girl who might know something about Ren. Crow also gives Seto his skull ring to keep in his locket and kisses him. At the hotel, Seto encounters Sai and fights the masked ghost again. After laying to rest the spirit of an old woman named Chiyo, the two discover Ren's drawings by a sewer. Returning to the underground, Seto and Sai find themselves at a hydropower dam. While searching for Ren, Seto discovers that Crow is actually a robot, but his battery begins to fail and Seto mourns for him as he "die[s]". Finally, they encounter Ren in a cell: although glad to see him again, Ren runs off after Shin calls. Sai explains to Seto that most of humanity died because of a "human empathy expansion project" called Glass Cage. The project was meant to make human thoughts transparent, meaning that no one would need words to communicate. However, after Glass Cage activated, people who went to sleep never woke up again. Sai reveals that she was Glass Cage's first catalyst: this time, Shin intends to use Ren as the catalyst. After exiting the dam, a demolition crane attempts to destroy it. Hearing both Shin's and the masked ghost's voices from the crane — saying, "Any threat to the project must be eliminated." — the player realizes both are manifestations of Glass Cage. After Seto destroys the crane, Sai leads him to the facility where Ren was taken to. Entering the laboratory, Seto and Sai are confronted by Shin, who coldly dismisses Sai's attempts at reasoning with him and is adamant about proceeding with his plans. As they traverse the laboratory, they overhear a voice announcing "Glass Cage Launch Preparations Complete", strengthening their resolve to save Ren. Making it into the room where Ren is being held, Shin tells them of his intention to use Glass Cage to "obliterate corporeal beings". After Seto defeats him, Shin disappears and Seto releases Ren from the device holding her. Their reunion is cut short as Sai tells them that the backup system has "finished copying her psyche to the AI", allowing Glass Cage to proceed. Ren reveals Shin has escaped to the top of the Tokyo Tower and Seto asks Ren to wait at the base of the tower and for Sai to accompany her. On his way up the tower, Seto hears the voices of P.F., Chiyo and Crow wishing him luck. He confronts and defeats Shin a second time, who reveals his motivations: he had secretly used himself as the first test subject of the human empathy expansion project and gained the ability to hear the thoughts of those around him. Despite his initial belief in the project as a way for humans to empathize with one another, all he heard around him was "jealousy and contempt" and he soon grew disillusioned with the world as even his parents turned against him. Believing no person loved him, Shin wants to put an end to humanity. His words meet with a vehement response from Sai, as she tells him that she loves him, having developed those feelings while she was the catalyst and all she ever wanted was to be part of his life. Hearing this, Shin finds peace, tossing the AI mainframe away so Glass Cage can never be reactivated and vanishes together with Sai, hand-in-hand, after thanking Seto. Descending from the tower, Seto finally learns Ren's name and they resolve to look for other survivors together. == Development == Fragile Dreams was developed by the team at Namco Bandai Games. Director and producer Kentarō Kawashima came up with the concept for the game in 2003, before the Wii console was revealed. When the Wii was unveiled, it became the obvious choice as the game's platform as the Wii remote could be used to control the flashlight. Kawashima wrote the main scenario for the title, w

    Read more →
  • Taylor Swift deepfake pornography controversy

    Taylor Swift deepfake pornography controversy

    In late January 2024, sexually explicit AI-generated deepfake images of American musician Taylor Swift were proliferated on social media platforms 4chan and X (formerly Twitter). Several artificial images of Swift of a sexual or violent nature were quickly spread, with one post reported to have been seen over 47 million times before its eventual removal. The images led Microsoft to enhance Microsoft Designer's text-to-image model to prevent future abuse. Moreover, these images prompted responses from anti-sexual assault advocacy groups, US politicians, Swifties, and Microsoft CEO Satya Nadella, among others, and it has been suggested that Swift's influence could result in new legislation regarding the creation of deepfake pornography. A similar controversy emerged in August 2025, when The Verge reported AI image and video tool Grok Imagine generated sexually explicit images and videos of Swift from an otherwise innocuous text prompt. == Background == American musician Taylor Swift has been the target of misogyny and slut-shaming throughout her career. American technology corporation Microsoft offers AI image creators called Microsoft Designer and Bing Image Creator, which employ censorship safeguards to prevent users from generating unsafe or objectionable content. Members of a Telegram group discussed ways to circumvent these censors to create pornographic images of celebrities. Graphika, a disinformation research firm, traced the creation of the images back to a 4chan community. == Reactions == For some, the deepfake images of Swift immediately became a source of controversy and outrage. Other internet users found them humorous and absurd, such as the image making it appear as though Swift was to engage in sexual intercourse with Oscar the Grouch. The images drew condemnations from Rape, Abuse & Incest National Network and SAG-AFTRA. The latter group, who had been following issues regarding AI-generated media prior to Swift's involvement, considered the images "upsetting, harmful and deeply concerning." Microsoft CEO Satya Nadella, whose company's products were believed to be used to make these images, responded to the controversy as "alarming and terrible", further stating his belief that "we all benefit when the online world is a safe world." === Taylor Swift === A source close to Swift told the Daily Mail that she would be considering legal action, saying, "Whether or not legal action will be taken is being decided, but there is one thing that is clear: These fake AI-generated images are abusive, offensive, exploitative, and done without Taylor's consent and/or knowledge." === Politicians === White House press secretary Karine Jean-Pierre expressed concern over the counterfeit images, deeming them "alarming", and emphasized the obligation of social media platforms to curb the dissemination of misinformation. Several members of American politics called for legislation against AI-generated pornography. Later in the month, a bipartisan bill was introduced by US senators Dick Durbin, Lindsey Graham, Amy Klobuchar and Josh Hawley. The bill would allow victims to sue individuals who produced or possessed "digital forgeries" with intent to distribute, or those who received the material knowing it was made without consent. The European Union struck a deal in February 2024 on a similar bill that would criminalize deepfake pornography, as well as online harassment and revenge porn, by mid-2027. === Social media platforms === X responded to the sharing of these images on their own website with claims they would suspend accounts that participated in their spread. Despite this, the photos continued to be reshared among accounts of X, and spread to other platforms including Instagram and Reddit. X enforces a "synthetic and manipulated media policy", which has been criticized for its efficacy. They briefly blocked searches of Swift's name on January 27, 2024, reinstating them two days later. === Swifties === Fans of Taylor Swift, known as Swifties, responded to the circulation of these images by pushing the hashtag #ProtectTaylorSwift to trend on X. They also flooded other hashtags related to the images with more positive images and videos of her live performances. == Cultural significance == Deepfake pornography has remained highly controversial and has affected figures from other celebrities to ordinary people, most of whom are women. Journalists have opined that the involvement of a prominent public figure such as Swift in the dissemination of AI-generated pornography could bring public awareness and political reform to the issue.

    Read more →
  • Vehicle infrastructure integration

    Vehicle infrastructure integration

    The Vehicle Infrastructure Integration (VII), also known as "Connected Roadways" or "vehicle-to-everything" (V2X) technology, is a United States Department of Transportation initiative that aims to improve road safety by developing technology that connects road vehicles with their environment. This development draws on several disciplines, including transport engineering, electrical engineering, automotive engineering, telematics, and computer science. Although VII specifically covers road transport, similar technologies are under development for other modes of transport. For example, airplanes may use ground-based beacons for automated guidance, allowing the autopilot to fly the plane without human intervention. == Goals == The goal of VII is to establish a communication link between vehicles (via On-Board Equipment, or OBE) and roadside infrastructure (via Roadside Equipment, or RSE) to enhance the safety, efficiency, and convenience of transportation systems. Two potential approaches are the widespread deployment of a dedicated short-range communications (DSRC) link on the 5.9GHz band, and cellular communication (C-V2X). Either of these methods would allow vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communication. The initiative has three priorities: Stakeholder evaluation and acceptance of the business model and its deployment schedule, Validation of the technology, with a focus on communications systems, in relation to deployment costs, and Creation of legal structures and policies, especially concerning digital privacy, to improve the system's long-term potential for success. === Safety === Current automotive safety technology relies primarily on vehicle-based radar, lidar, and sonar systems. This technology allows, for instance, a potential reduction in rear-end collisions by monitoring obstacles in front of or behind the vehicle and automatically applying the brakes when necessary. This technology, however, is limited by the sensing range of vehicle-based radar, particularly in angled and left-turn collisions, such as a motorist losing control of the vehicle during an impending head-on collision. The rear-end collisions addressed by current technology are generally less severe than angled, left-turn, or head-on collisions. VII promotes the development of a direct communication link between road vehicles and all other vehicles nearby, allowing for the exchange of information on vehicle speed and orientation or driver awareness and intent. This real-time exchange of information may enable more effective automated emergency maneuvers, such as steering, decelerating, or braking. In addition to nearby vehicle awareness, VII promotes a communication link between vehicles and roadway infrastructure. Such a link may allow for improved real-time traffic information, better queue management, and feedback to vehicles. Existing implementations of VII use vehicle-based sensors that can recognize and respond to roadway markings or signs, automatically adjusting vehicle parameters to follow the recognized instructions. However, this information may also be acquired via roadside beacons or stored in a centralized database accessible to all vehicles. === Efficiency === With a VII system in place, vehicles will be linked together. The headway between vehicles may therefore be reduced so that there is less empty space on the road, increasing the available capacity per lane. More capacity per lane will in turn imply fewer lanes in general, possibly satisfying the community's concerns about the impact of roadway widening. VII will enable precise traffic-signal coordination by tracking vehicle platoons and will benefit from accurate timing by drawing on real-time traffic data covering volume, density, and turning movements. Real-time traffic data can also be used in the design of new roadways or modification of existing systems as the data could be used to provide accurate origin-destination studies and turning-movement counts for uses in transportation forecasting and traffic operations. Such technology would also lead to improvements for transport engineers to address problems whilst reducing the cost of obtaining and compiling data. Tolling is another prospect for VII technology as it could enable roadways to be automatically tolled. Data could be collectively transmitted to road users for in-vehicle display, outlining the lowest cost, shortest distance, and/or fastest route to a destination on the basis of real-time conditions. === Existing applications === To some extent, results along these lines have been achieved in trials performed around the globe, making use of GPS, mobile phone signals, and vehicle registration plates. GPS is becoming standard in many new high-end vehicles and is an option on most new low- and mid-range vehicles. In addition, many users also have mobile phones that transmit trackable signals (and may also be GPS-enabled). Mobile phones can already be traced for purposes of emergency response. GPS and mobile phone tracking, however, do not provide fully reliable data. Furthermore, integrating mobile phones in vehicles may be prohibitively difficult. Data from mobile phones, though useful, might even increase risks to motorists as they tend to look at their phones rather than concentrate on their driving. Automatic registration plate recognition can provide large quantities of data, but continuously tracking a vehicle through a corridor is a difficult task with existing technology. Today's equipment is designed for data acquisition and functions such as enforcement and tolling, not for returning data to vehicles or motorists for response. GPS will nevertheless be one of the key components in VII systems. == Limitations == === Privacy === VII architecture is designed to prevent identification of individual vehicles, with all data exchange between the vehicle and the system occurring anonymously. Exchanges between the vehicles and third parties such as OEMs and toll collectors will occur, but the network traffic will be sent via encrypted tunnels and will therefore not be decipherable by the VII system. Data sharing with law enforcement or Homeland Security was not included in system design as of 2006. === Technical issues === ==== Coordination ==== A major issue facing the deployment of VII is the problem of how to set up the system initially. The costs associated with installing the technology in vehicles and providing communications and power at every intersection are significant. ==== Maintenance ==== Another factor for consideration in regard to the technology's distribution is how to update and maintain the units. Traffic systems are highly dynamic, with new traffic controls implemented every day and roadways constructed or repaired every year. The vehicle-based option could be updated via the internet (preferably wireless) but may subsequently require all users to have access to internet technology. Alternatively, if receivers were placed in all vehicles and the VII system was primarily located along the roadside, information could be stored in a centralized database. This would allow the agency responsible to issue updates at any time. These would then be disseminated to the roadside units for passing motorists. Operationally, this method is currently considered to provide the greatest effectiveness but at a high cost to the authorities. ==== Security ==== Security of the units is another concern, especially in light of the public acceptance issue. Criminals could tamper, remove, or destroy VII units regardless of whether they are installed inside vehicles or along the roadside. Magnets, electric shocks, and malicious software (viruses, hacking, or jamming) could be used to damage VII systems – regardless of whether units are located inside vehicle or along the roadside. == Recent developments == Much of the current research and experimentation is conducted in the United States where coordination is ensured through the Vehicle Infrastructure Integration Consortium; consisting of automobile manufacturers (Ford, General Motors, Daimler Chrysler, Toyota, Nissan, Honda, Volkswagen, BMW), IT suppliers, U.S. Federal and state transportation departments, and professional associations. Trialing is taking place in Michigan and California. The specific applications now being developed under the U.S. initiative are: Warning drivers of unsafe conditions or imminent collisions. Warning drivers if they are about to run off the road or speed around a curve too fast. Informing system operators of real-time congestion, weather conditions and incidents. Providing operators with information on corridor capacity for real-time management, planning and provision of corridor-wide advisories to drivers. In mid-2007, a VII environment covering some 20 square miles (52 km2) near Detroit was used to test 20 prototype VII applications. Several automobile manufacturers are also conducting their own VII research and triali

    Read more →
  • Symbolic regression

    Symbolic regression

    Symbolic regression (SR) is a type of regression analysis that searches the space of mathematical expressions to find the model that best fits a given dataset, both in terms of accuracy and simplicity. No particular model is provided as a starting point for symbolic regression. Instead, initial expressions are formed by randomly combining mathematical building blocks such as mathematical operators, analytic functions, constants, and state variables. Usually, a subset of these primitives will be specified by the person operating it, but that's not a requirement of the technique. The symbolic regression problem for mathematical functions has been tackled with a variety of methods, including recombining equations most commonly using genetic programming, as well as more recent methods utilizing Bayesian methods and neural networks. Another non-classical alternative method to SR is called Universal Functions Originator (UFO), which has a different mechanism, search-space, and building strategy. Further methods such as Exact Learning attempt to transform the fitting problem into a moments problem in a natural function space, usually built around generalizations of the Meijer-G function. By not requiring a priori specification of a model, symbolic regression isn't affected by human bias, or unknown gaps in domain knowledge. It attempts to uncover the intrinsic relationships of the dataset, by letting the patterns in the data itself reveal the appropriate models, rather than imposing a model structure that is deemed mathematically tractable from a human perspective. The fitness function that drives the evolution of the models takes into account not only error metrics (to ensure the models accurately predict the data), but also special complexity measures, thus ensuring that the resulting models reveal the data's underlying structure in a way that's understandable from a human perspective. This facilitates reasoning and favors the odds of getting insights about the data-generating system, as well as improving generalisability and extrapolation behaviour by preventing overfitting. Accuracy and simplicity may be left as two separate objectives of the regression—in which case the optimum solutions form a Pareto front—or they may be combined into a single objective by means of a model selection principle such as minimum description length. It has been proven that symbolic regression is an NP-hard problem. Nevertheless, if the sought-for equation is not too complex it is possible to solve the symbolic regression problem exactly by generating every possible function (built from some predefined set of operators) and evaluating them on the dataset in question. == Difference from classical regression == While conventional regression techniques seek to optimize the parameters for a pre-specified model structure, symbolic regression avoids imposing prior assumptions, and instead infers the model from the data. In other words, it attempts to discover both model structures and model parameters. This approach has the disadvantage of having a much larger space to search, because not only the search space in symbolic regression is infinite, but there are an infinite number of models which will perfectly fit a finite data set (provided that the model complexity isn't artificially limited). This means that it will possibly take a symbolic regression algorithm longer to find an appropriate model and parametrization, than traditional regression techniques. This can be attenuated by limiting the set of building blocks provided to the algorithm, based on existing knowledge of the system that produced the data; but in the end, using symbolic regression is a decision that has to be balanced with how much is known about the underlying system. Nevertheless, this characteristic of symbolic regression also has advantages: because the evolutionary algorithm requires diversity in order to effectively explore the search space, the result is likely to be a selection of high-scoring models (and their corresponding set of parameters). Examining this collection could provide better insight into the underlying process, and allows the user to identify an approximation that better fits their needs in terms of accuracy and simplicity. == Benchmarking == === SRBench === In 2021, SRBench was proposed as a large benchmark for symbolic regression. In its inception, SRBench featured 14 symbolic regression methods, 7 other ML methods, and 252 datasets from PMLB. The benchmark intends to be a living project: it encourages the submission of improvements, new datasets, and new methods, to keep track of the state of the art in SR. === SRBench Competition 2022 === In 2022, SRBench announced the competition Interpretable Symbolic Regression for Data Science, which was held at the GECCO conference in Boston, MA. The competition pitted nine leading symbolic regression algorithms against each other on a novel set of data problems and considered different evaluation criteria. The competition was organized in two tracks, a synthetic track and a real-world data track. ==== Synthetic Track ==== In the synthetic track, methods were compared according to five properties: re-discovery of exact expressions; feature selection; resistance to local optima; extrapolation; and sensitivity to noise. Rankings of the methods were: QLattice PySR (Python Symbolic Regression) uDSR (Deep Symbolic Optimization) ==== Real-world Track ==== In the real-world track, methods were trained to build interpretable predictive models for 14-day forecast counts of COVID-19 cases, hospitalizations, and deaths in New York State. These models were reviewed by a subject expert and assigned trust ratings and evaluated for accuracy and simplicity. The ranking of the methods was: uDSR (Deep Symbolic Optimization) QLattice geneticengine (Genetic Engine) == Non-standard methods == Most symbolic regression algorithms prevent combinatorial explosion by implementing evolutionary algorithms that iteratively improve the best-fit expression over many generations. Recently, researchers have proposed algorithms utilizing other tactics in AI. Silviu-Marian Udrescu and Max Tegmark developed the "AI Feynman" algorithm, which attempts symbolic regression by training a neural network to represent the mystery function, then runs tests against the neural network to attempt to break up the problem into smaller parts. For example, if f ( x 1 , . . . , x i , x i + 1 , . . . , x n ) = g ( x 1 , . . . , x i ) + h ( x i + 1 , . . . , x n ) {\displaystyle f(x_{1},...,x_{i},x_{i+1},...,x_{n})=g(x_{1},...,x_{i})+h(x_{i+1},...,x_{n})} , tests against the neural network can recognize the separation and proceed to solve for g {\displaystyle g} and h {\displaystyle h} separately and with different variables as inputs. This is an example of divide and conquer, which reduces the size of the problem to be more manageable. AI Feynman also transforms the inputs and outputs of the mystery function in order to produce a new function which can be solved with other techniques, and performs dimensional analysis to reduce the number of independent variables involved. The algorithm was able to "discover" 100 equations from The Feynman Lectures on Physics, while a leading software using evolutionary algorithms, Eureqa, solved only 71. AI Feynman, in contrast to classic symbolic regression methods, requires a very large dataset in order to first train the neural network and is naturally biased towards equations that are common in elementary physics.

    Read more →
  • Document AI

    Document AI

    Document AI, also known as Document Intelligence, refers to a field of technology that employs machine learning (ML) techniques, such as natural language processing (NLP). These techniques are used to develop computer models capable of analyzing documents in a manner akin to human review. Through NLP, computer systems are able to understand relationships and contextual nuances in document contents, which facilitates the extraction of information and insights. Additionally, this technology enables the categorization and organization of the documents themselves. The applications of Document AI extend to processing and parsing a variety of semi-structured documents, such as forms, tables, receipts, invoices, tax forms, contracts, loan agreements, and financial reports. == Key features == Machine learning is utilized in Document AI to extract information from both printed and digital documents. This technology recognizes images, text, and characters in various languages, aiding in the extraction of insights from unstructured documents. The use of this technology can improve the speed and quality of decision-making in document analysis. Additionally, the automation of data extraction and validation can contribute to increased efficiency in document analysis processes. Since the early 2020s, the integration of large language models has extended Document AI beyond extraction toward generative tasks, including the automated drafting of forms, contracts, and document summaries. == Example == A business letter contains information in the form of text, as well as other types of information, such as the position of the text. For instance, a typical letter contains two addresses before the body of the text. The address at the very top (sometimes aligned to the right) is the sender address. This is normally followed by the date of the letter, with the place of writing. After this, the receiver address is listed. The distinction between the sender address and the receiver address is conveyed solely by the position of the address on the page, i.e. there is no textual indication like Sender: in front of the addresses. == Data dimensions and ML architecture == Data is typically distinguished into spatial data and time-series data, the former includes things like images, maps and graphs, while the latter includes signals such as stock prices or voice recordings. Document AI combines text data, which has a time dimension, with other types of data, such as the position of an address in a business letter, which is spatial. Historically in machine learning spatial data was analyzed using a convolutional neural network, and temporal data using a recurrent neural network. With the advent of dimension-type agnostic transformer architecture, these two different types of dimension can be more easily combined, Document AI is an example of this. == Benchmarks == Several public datasets are used to evaluate Document AI systems. FUNSD (Form Understanding in Noisy Scanned Documents) contains 199 annotated forms with token- and block-level labels for form understanding tasks. CORD (Consolidated Receipt Dataset) supports key information extraction from receipts. DocVQA contains approximately 50,000 questions over 12,000 document images for layout-aware visual question answering. == Common uses == Document AI systems are used to automate document processing and information extraction in business and financial workflows, including invoice and receipt processing, data entry automation, anomaly detection, mortgage processing, loan portfolio monitoring, credit risk management, and fraud detection such as counterfeit currency and fraudulent checks. They are also applied in regulatory compliance and contract analysis, including assessing changes in legal and regulatory documents. In real estate, Document AI supports document classification and structured information extraction for standardized processing and analytics. With the adoption of generative AI, Document AI systems can also generate and pre-fill structured documents such as contracts or business forms from natural language prompts.

    Read more →
  • Diagnosis (artificial intelligence)

    Diagnosis (artificial intelligence)

    As a subfield in artificial intelligence, diagnosis is concerned with the development of algorithms and techniques that are able to determine whether the behaviour of a system is correct. If the system is not functioning correctly, the algorithm should be able to determine, as accurately as possible, which part of the system is failing, and which kind of fault it is facing. The computation is based on observations, which provide information on the current behaviour. The expression diagnosis also refers to the answer of the question of whether the system is malfunctioning or not, and to the process of computing the answer. This word comes from the medical context where a diagnosis is the process of identifying a disease by its symptoms. == Example == An example of diagnosis is the process of a garage mechanic with an automobile. The mechanic will first try to detect any abnormal behavior based on the observations on the car and his knowledge of this type of vehicle. If he finds out that the behavior is abnormal, the mechanic will try to refine his diagnosis by using new observations and possibly testing the system, until he discovers the faulty component; the mechanic plays an important role in the vehicle diagnosis. == Expert diagnosis == The expert diagnosis (or diagnosis by expert system) is based on experience with the system. Using this experience, a mapping is built that efficiently associates the observations to the corresponding diagnoses. The experience can be provided: By a human operator. In this case, the human knowledge must be translated into a computer language. By examples of the system behaviour. In this case, the examples must be classified as correct or faulty (and, in the latter case, by the type of fault). Machine learning methods are then used to generalize from the examples. The main drawbacks of these methods are: The difficulty acquiring the expertise. The expertise is typically only available after a long period of use of the system (or similar systems). Thus, these methods are unsuitable for safety- or mission-critical systems (such as a nuclear power plant, or a robot operating in space). Moreover, the acquired expert knowledge can never be guaranteed to be complete. In case a previously unseen behaviour occurs, leading to an unexpected observation, it is impossible to give a diagnosis. The complexity of the learning. The off-line process of building an expert system can require a large amount of time and computer memory. The size of the final expert system. As the expert system aims to map any observation to a diagnosis, it will in some cases require a huge amount of storage space. The lack of robustness. If even a small modification is made on the system, the process of constructing the expert system must be repeated. A slightly different approach is to build an expert system from a model of the system rather than directly from an expertise. An example is the computation of a diagnoser for the diagnosis of discrete event systems. This approach can be seen as model-based, but it benefits from some advantages and suffers some drawbacks of the expert system approach. == Model-based diagnosis == Model-based diagnosis is an example of abductive reasoning using a model of the system. In general, it works as follows: We have a model that describes the behaviour of the system (or artefact). The model is an abstraction of the behaviour of the system and can be incomplete. In particular, the faulty behaviour is generally little-known, and the faulty model may thus not be represented. Given observations of the system, the diagnosis system simulates the system using the model, and compares the observations actually made to the observations predicted by the simulation. The modelling can be simplified by the following rules (where A b {\displaystyle Ab\,} is the Abnormal predicate): ¬ A b ( S ) ⇒ I n t 1 ∧ O b s 1 {\displaystyle \neg Ab(S)\Rightarrow Int1\wedge Obs1} A b ( S ) ⇒ I n t 2 ∧ O b s 2 {\displaystyle Ab(S)\Rightarrow Int2\wedge Obs2} (fault model) The semantics of these formulae is the following: if the behaviour of the system is not abnormal (i.e. if it is normal), then the internal (unobservable) behaviour will be I n t 1 {\displaystyle Int1\,} and the observable behaviour O b s 1 {\displaystyle Obs1\,} . Otherwise, the internal behaviour will be I n t 2 {\displaystyle Int2\,} and the observable behaviour O b s 2 {\displaystyle Obs2\,} . Given the observations O b s {\displaystyle Obs\,} , the problem is to determine whether the system behaviour is normal or not ( ¬ A b ( S ) {\displaystyle \neg Ab(S)\,} or A b ( S ) {\displaystyle Ab(S)\,} ). This is an example of abductive reasoning. == Diagnosability == A system is said to be diagnosable if whatever the behavior of the system, we will be able to determine without ambiguity a unique diagnosis. The problem of diagnosability is very important when designing a system because on one hand one may want to reduce the number of sensors to reduce the cost, and on the other hand one may want to increase the number of sensors to increase the probability of detecting a faulty behavior. Several algorithms for dealing with these problems exist. One class of algorithms answers the question whether a system is diagnosable; another class looks for sets of sensors that make the system diagnosable, and optionally comply to criteria such as cost optimization. The diagnosability of a system is generally computed from the model of the system. In applications using model-based diagnosis, such a model is already present and doesn't need to be built from scratch.

    Read more →