AI Detector Similar To Turnitin

AI Detector Similar To Turnitin — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Algorithmic bias

    Algorithmic bias

    Algorithmic bias describes systematic and repeatable harmful tendency in a computerized sociotechnical system to create "unfair" outcomes, such as "privileging" one category over another in ways that may or may not be different from the intended function of the algorithm. Bias can emerge from many factors, including intentionally biased design decisions or the unintended or unanticipated use or decisions relating to the way data is coded, collected, selected or used to train the algorithm. For example, algorithmic bias has been observed in search engine results and social media platforms. This bias can have impacts ranging from privacy violations to reinforcing social biases of race, gender, sexuality, and ethnicity. The study of algorithmic bias is most concerned with algorithms that reflect "systematic and unfair" discrimination. This bias has only recently been addressed in legal frameworks, such as the European Union's General Data Protection Regulation (enforced in 2018) and the Artificial Intelligence Act (proposed in 2021 and adopted in 2024). As algorithms expand their ability to organize society, politics, institutions, and behavior, sociologists have become concerned with the ways in which unanticipated output and manipulation of data can impact the physical world. Because algorithms are often considered to be neutral and unbiased, they can inaccurately project greater authority than human expertise (in part due to the psychological phenomenon of automation bias), and in some cases, reliance on algorithms can displace human responsibility for their outcomes, without last mile thinking. Bias can enter into algorithmic systems as a result of pre-existing cultural, social, or institutional expectations; by how features and labels are chosen; because of technical limitations of their design; or by being used in unanticipated contexts or by audiences who are not considered in the software's initial design. Algorithmic bias has been cited in cases ranging from election outcomes to the spread of online hate speech. It has also arisen in criminal justice, healthcare, and hiring, compounding existing racial, socioeconomic, and gender biases. The relative inability of facial recognition technology to accurately identify darker-skinned faces has been linked to multiple wrongful arrests of black men, an issue stemming from imbalanced datasets. Problems in understanding, researching, and discovering algorithmic bias persist due to the proprietary nature of algorithms, which are typically treated as trade secrets. Even when full transparency is provided, the complexity of certain algorithms poses a barrier to understanding their functioning. Furthermore, algorithms may change, or respond to input or output in ways that cannot be anticipated or easily reproduced for analysis. In many cases, even within a single website or application, there is no single "algorithm" to examine, but a network of many interrelated programs and data inputs, even between users of the same service. A 2021 survey identified multiple forms of algorithmic bias, including historical, representation, and measurement biases, each of which can contribute to unfair outcomes. == Definitions == Algorithms are difficult to define, but may be generally understood as lists of instructions that determine how programs read, collect, process, and analyze data to generate a usable output. For a rigorous technical introduction, see Algorithms. Advances in computer hardware and software have led to an increased capability to process, store and transmit data. This has in turn made the design and adoption of technologies such as machine learning and artificial intelligence technically and commercially feasible. By analyzing and processing data, algorithms are the backbone of search engines, social media websites, recommendation engines, online retail, online advertising, and more. Contemporary social scientists are concerned with algorithmic processes embedded into hardware and software applications because of their political and social impact, and question the underlying assumptions of an algorithm's neutrality. The term algorithmic bias describes systematic and repeatable errors that create unfair outcomes, such as privileging one arbitrary group of users over others. For example, a credit score algorithm may deny a loan without being unfair, if it is consistently weighing relevant financial criteria. If the algorithm recommends loans to one group of users, but denies loans to another set of nearly identical users based on unrelated criteria, and if this behavior can be repeated across multiple occurrences, an algorithm can be described as biased. This bias may be intentional or unintentional (for example, it can come from biased data obtained from a worker that previously did the job the algorithm is going to do from now on). == Methods == Bias can be introduced to an algorithm in several ways. During the assemblage of a dataset, data may be collected, digitized, adapted, and entered into a database according to human-designed cataloging criteria. Next, programmers assign priorities, or hierarchies, for how a program assesses and sorts that data. This requires human decisions about how data is categorized, and which data is included or discarded. Some algorithms collect their own data based on human-selected criteria, which can also reflect the bias of human designers. Other algorithms may reinforce stereotypes and preferences as they process and display "relevant" data for human users, for example, by selecting information based on previous choices of a similar user or group of users. Beyond assembling and processing data, bias can emerge as a result of design. For example, algorithms that determine the allocation of resources or scrutiny (such as determining school placements) may inadvertently discriminate against a category when determining risk based on similar users (as in credit scores). Meanwhile, recommendation engines that work by associating users with similar users, or that make use of inferred marketing traits, might rely on inaccurate associations that reflect broad ethnic, gender, socio-economic, or racial stereotypes. Another example comes from determining criteria for what is included and excluded from results. These criteria could present unanticipated outcomes for search results, such as with flight-recommendation software that omits flights that do not follow the sponsoring airline's flight paths. Algorithms may also display an uncertainty bias, offering more confident assessments when larger data sets are available. This can skew algorithmic processes toward results that more closely correspond with larger samples, which may disregard data from underrepresented populations. == History == === Early critiques === The earliest computer programs were designed to mimic human reasoning and deductions, and were deemed to be functioning when they successfully and consistently reproduced that human logic. In his 1976 book Computer Power and Human Reason, artificial intelligence pioneer Joseph Weizenbaum suggested that bias could arise both from the data used in a program, but also from the way a program is coded. Weizenbaum wrote that programs are a sequence of rules created by humans for a computer to follow. By following those rules consistently, such programs "embody law", that is, enforce a specific way to solve problems. The rules a computer follows are based on the assumptions of a computer programmer for how these problems might be solved. That means the code could incorporate the programmer's imagination of how the world works, including their biases and expectations. While a computer program can incorporate bias in this way, Weizenbaum also noted that any data fed to a machine additionally reflects "human decision making processes" as data is being selected. Finally, he noted that machines might also transfer good information with unintended consequences if users are unclear about how to interpret the results. Weizenbaum warned against trusting decisions made by computer programs that a user doesn't understand, comparing such faith to a tourist who can find his way to a hotel room exclusively by turning left or right on a coin toss. Crucially, the tourist has no basis of understanding how or why he arrived at his destination, and a successful arrival does not mean the process is accurate or reliable. An early example of algorithmic bias resulted in as many as 60 women and ethnic minorities denied entry to St. George's Hospital Medical School per year from 1982 to 1986, based on implementation of a new computer-guidance assessment system that denied entry to women and men with "foreign-sounding names" based on historical trends in admissions. While many schools at the time employed similar biases in their selection process, St. George was most notable for automating said bias through the use of an algorithm, thus gaining the attention of people on a much

    Read more →
  • Desktop Window Manager

    Desktop Window Manager

    Desktop Window Manager (DWM, previously Desktop Compositing Engine or DCE in builds of pre-reset Windows Longhorn) is the compositing window manager in Microsoft Windows since Windows Vista that enables the use of hardware acceleration to render the graphical user interface of Windows. It was originally created to enable portions of the new "Windows Aero" user experience, which allowed for effects such as transparency, 3D window switching and more. It is also included with Windows Server 2008, but requires the "Desktop Experience" feature and compatible graphics drivers to be installed. == Architecture == The Desktop Window Manager is a compositing window manager, meaning that each program has a buffer that it writes data to; DWM then composites each program's buffer into a final image. By comparison, the stacking window manager in Windows XP and earlier (and also Windows Vista and Windows 7 with Windows Aero disabled) comprises a single display buffer to which all programs write. DWM works in different ways depending on the operating system (Windows 7 or Windows Vista) and on the version of the graphics drivers it uses (WDDM 1.0 or 1.1). Under Windows 7 and with WDDM 1.1 drivers, DWM only writes the program's buffer to the video RAM, even if it is a graphics device interface (GDI) program. This is because Windows 7 supports (limited) hardware acceleration for GDI and in doing so does not need to keep a copy of the buffer in system RAM so that the CPU can write to it. Because the compositor has access to the graphics of all applications, it easily allows visual effects that string together visuals from multiple applications, such as transparency. DWM uses DirectX to perform the function of compositing and rendering in the GPU, freeing the CPU of the task of managing the rendering from the off-screen buffers to the display. However, it does not affect applications painting to the off-screen buffers – depending on the technologies used for that, this might still be CPU-bound. DWM-agnostic rendering techniques like GDI are redirected to the buffers by rendering the user interface (UI) as bitmaps. DWM-aware rendering technologies like WPF directly make the internal data structures available in a DWM-compatible format. The window contents in the buffers are then converted to DirectX textures. The desktop itself is a full-screen Direct3D surface, with windows being represented as a mesh consisting of two adjacent (and mutually inverted) triangles, which are transformed to represent a 2D rectangle. The texture, representing the UI chrome, is then mapped onto these rectangles. Window transitions are implemented as transformations of the meshes, using shader programs. With Windows Vista, the transitions are limited to the set of built-in shaders that implement the transformations. Greg Schechter, a developer at Microsoft has suggested that this might be opened up for developers and users to plug in their own effects in a future release. DWM only maps the primary desktop object as a 3D surface; other desktop objects, including virtual desktops as well as the secure desktop used by User Account Control are not. Because all applications render to an off-screen buffer, they can be read off the buffer embedded in other applications as well. Since the off-screen buffer is constantly updated by the application, the embedded rendering will be a dynamic representation of the application window and not a static rendering. This is how the live thumbnail previews and Windows Flip work in Windows Vista and Windows 7. DWM exposes a public API that allows applications to access these thumbnail representations. The size of the thumbnail is not fixed; applications can request the thumbnails at any size - smaller than the original window, at the same size or even larger - and DWM will scale them properly before returning. Aero Flip does not use the public thumbnail APIs as they do not allow for directly accessing the Direct3D textures. Instead, Aero Flip is implemented directly in the DWM engine. The Desktop Window Manager uses Media Integration Layer (MIL), the unmanaged compositor which it shares with Windows Presentation Foundation, to represent the windows as composition nodes in a composition tree. The composition tree represents the desktop and all the windows hosted in it, which are then rendered by MIL from the back of the scene to the front. Since all the windows contribute to the final image, the color of a resultant pixel can be decided by more than one window. This is used to implement effects such as per-pixel transparency. DWM allows custom shaders to be invoked to control how pixels from multiple applications are used to create the displayed pixel. The DWM includes built-in Pixel Shader 2.0 programs which compute the color of a pixel in a window by averaging the color of the pixel as determined by the window behind it and its neighboring pixels. These shaders are used by DWM to achieve the blur effect in the window borders of windows managed by DWM, and optionally for the areas where it is requested by the application. Since MIL provides a retained mode graphics system by caching the composition trees, the job of repainting and refreshing the screen when windows are moved is handled by DWM and MIL, freeing the application of the responsibility. The background data is already in the composition tree and the off-screen buffers and is directly used to render the background. In pre-Vista Windows OSs, background applications had to be requested to re-render themselves by sending them the WM_PAINT message. DWM uses double-buffered graphics to prevent flickering and tearing when moving windows. The compositing engine uses optimizations such as culling to improve performance, as well as not redrawing areas that have not changed. Because the compositor is multi-monitor aware, DWM natively supports this too. During full-screen applications, such as games, DWM does not perform window compositing and therefore performance will not appreciably decrease. On Windows 8 and Windows Server 2012, DWM is used at all times and cannot be disabled, due to the new "start screen experience" implemented. Since the DWM process is usually required to run at all times on Windows 8, users experiencing an issue with the process are seeing memory usage decrease after a system reboot. This is often the first step in a long list of troubleshooting tasks that can help. It is possible to prevent DWM from restarting temporarily in Windows 8, which causes the desktop to turn black, the taskbar grey, and break the start screen/modern apps, but desktop apps will continue to function and appear just like Windows 7 and Vista's Basic theme, based on the single-buffer renderer used by XP. They also use Windows 8's centered title bar, visible within Windows PreInstallation Environment. Starting up Windows without DWM will not work because the default lock screen requires DWM unlike the fallback lockscreen that appears as a command line interface program when Windows.UI.Logon.dll isn't present on Windows versions such as 1507 and later, so it can only be done on the fly, and does not have any practical purposes. Starting with Windows 10, disabling DWM in such a way will cause the entire compositing engine to break, even traditional desktop apps, due to Universal App implementations in the taskbar and new start menu. Windows can still be partially usable without the presence of DWM but requires Sihost.exe to not be present due to it relying on DWM. Most of the applications in Windows 11 require DWM to render UI elements and transparency, Windows 11's new task manager requires dwm to render menus unlike the fallback -d version. Unlike its predecessors, Windows 8 supports basic display adapters through Windows Advanced Rasterization Platform (WARP), which uses software rendering and the CPU to render the interface rather than the graphics card. This allows DWM to function without compatible drivers, but not at the same level of performance as with a normal graphics card. DWM on Windows 8 also adds support for stereoscopic 3D. == Redirection == For rendering techniques that are not DWM-aware, output must be redirected to the DWM buffers. With Windows, either GDI or DirectX can be used for rendering. To make these two work with DWM, redirection techniques for both are provided. With GDI, which is the most used UI rendering technique in Microsoft Windows, each application window is notified when it or a part of it comes in view and it is the job of the application to render itself. Without DWM, the rendering rasterizes the UI in a buffer in video memory, from where it is rendered to the screen. Under DWM, GDI calls are redirected to use the Canonical Display Driver (cdd.dll), a software renderer. A buffer equal to the size of the window is allocated in system memory and CDD.DLL outputs to this buffer rather than the video memory. Another buffer is allocated in the video memory to represent t

    Read more →
  • Comparison of raster graphics editors

    Comparison of raster graphics editors

    Raster graphics editors can be compared by many variables, including availability. == List == == General information == Basic general information about the editor: creator, company, license, etc. == Operating system support == The operating systems on which the editors can run natively, that is, without emulation, virtual machines or compatibility layers. In other words, the software must be specifically coded for the operation system; for example, Adobe Photoshop for Windows running on Linux with Wine does not fit. == Features == == Color spaces == == File support ==

    Read more →
  • AppyStore

    AppyStore

    AppyStore is a comprehensive learning videos and games app for kids up to the age of 8 years. The platform developed by Mauj Mobile, a mobile value-added services (VAS) provider curates content to help in child development by leveraging technology. Mauj is funded by Sequoia Capital, Westbridge Capital and Intel Capital. == Background == AppyStore was launched in 2014 as a platform providing content for kids between the ages of 1.5 and 6 years. AppyStore subsequently extended its services for kids up to 8 years of age. The company operates on a subscription-based model and claims to have 5,000 learning games and videos segregated in 18 learning areas developed to help children gain optimal skills and qualities. According to an article published in Business Standard, the application is claimed to be one of the top 5 apps that help to enhance the logical and imaginative capabilities of children. AppyStore was awarded the Best app for kids by Google Play in December 2017. == Service == The company provides content via a website and an Android app. The website and android app provide learning games, rhymes, phonics, reading, stories, science, numbers, maths, logic videos comprising puzzles, worksheets, videos and fun activities and the premium subscription also includes physical worksheets which are home delivered. This content is educational and has been handpicked by teachers and experts with an understanding of the major areas of child development milestones for children up to 8 years of age. The mobile application also allows parents to track the progress of their child on the basis of the number of videos viewed.

    Read more →
  • Carrier cloud

    Carrier cloud

    In cloud computing, a carrier cloud is a class of cloud that integrates wide area networks (WAN) and other attributes of communications service providers’ carrier-grade networks to enable the deployment of highly-complex applications in the cloud. In contrast, classic cloud computing focuses on the data center and does not address the network connecting data centers and cloud users. This may result in unpredictable response times and security issues when business-critical data are transferred over the Internet. == History == The advent of virtualization technology, cost-effective computing hardware, and ubiquitous Internet connectivity have enabled the first wave of cloud services starting in the early years of the 21st century. But many businesses and other organizations hesitated to move to more demanding applications, from on-premises dedicated hardware to private or public clouds. As a response, communications service providers started in the 2010/2011 time frame to develop carrier clouds that address perceived weaknesses in existing cloud services. Cited weaknesses vary but often include possible downtime, security issues, high cost of custom software and data transfer, inflexibility of some cloud apps, poor customer and nonfulfillment of service level agreements (SLAs). == Characteristics == To enable the deployment of time-sensitive and business critical applications in the cloud, the carrier cloud is designed to match or even exceed the characteristics of on-premises deployments. Therefore, the carrier cloud is characterized by some or all of the following items: Configurable, elastic network performance: Typical cloud computing solutions use the best effort of the public Internet to connect cloud users and data centers. This approach provides instant connectivity but does not offer control over network capacities, latencies, and jitter. Carrier clouds address these gaps with content delivery networks and/or dedicated virtual private networks (VPN) at OSI layers 1 (optical wavelengths), 2 (data link layer), and 3 (network layer). These VPNs can be configured to offer the desired performance parameters and exhibit the same type of elasticity for the network that regular clouds provide for servers and storage. To achieve the requested performance parameters, such as low latency, cloud applications can be (automatically) allocated to distributed data centers that are close enough to the cloud users. Automatic resource placement: For a cloud with multiple data centers, information about both the data center and the connecting network is relevant for a decision of where to place cloud images and storage volumes. For this decision, carrier clouds can obtain relevant information about the network, e.g., using the Application-Layer Traffic Optimization (ALTO) protocol. High level of security and governance: Cloud application providers are subject to general and domain specific security, privacy, and governance requirements and regulations, such as the European Data Protection Directive and the U.S. Health Insurance Portability and Accountability Act. For added security, the wide area network of the carrier cloud can provide segregated encrypted or unencrypted network links that are not accessible from the general Internet. At the data center, the carrier cloud provides e.g. virtual private servers, management processes, logs, and documentation to fulfill security and governance rules. Location control: Fundamentally, cloud users should not be concerned with the geographic location of their cloud resources. However, privacy and other regulations may mandate that certain types of data must not be sent outside a national jurisdiction or other geographical region. Open APIs: Carrier clouds provide graphical user interfaces and Web application programming interfaces that allow cloud application providers to set up, manage, and monitor both, the data center and the WAN, of their cloud services. == Architecture == Carrier clouds encompass data centers at different network tiers and wide area networks that connect multiple data centers to each other as well as to the cloud users. Links between data centers are used for failover, overflow, backup, and geographic diversity. Carrier clouds can be set up as public, private, or hybrid clouds. The carrier cloud federates these cloud entities by using a single management system to orchestrate, manage, and monitor data center and network resources as a single system.

    Read more →
  • Human–robot interaction

    Human–robot interaction

    Human–robot interaction (HRI) is the study of interactions between humans and robots. Human–robot interaction is a multidisciplinary field with contributions from human–computer interaction, artificial intelligence, robotics, natural language processing, design, psychology and philosophy. A subfield known as physical human–robot interaction (pHRI) has tended to focus on device design to enable people to safely interact with robotic systems. == Origins == Human–robot interaction has been a topic of both science fiction and academic speculation even before any robots existed. Because much of active HRI development depends on natural language processing, many aspects of HRI are continuations of human communications, a field of research which is much older than robotics. The origin of HRI as a discrete problem was stated by 20th-century author Isaac Asimov in 1941, in his novel I, Robot. Asimov coined Three Laws of Robotics, namely: A robot may not injure a human being or, through inaction, allow a human being to come to harm. A robot must obey the orders given it by human beings except where such orders would conflict with the First Law. A robot must protect its own existence as long as such protection does not conflict with the First or Second Laws. These three laws provide an overview of the goals engineers and researchers hold for safety in the HRI field, although the fields of robot ethics and machine ethics are more complex than these three principles. However, generally human–robot interaction prioritizes the safety of humans that interact with potentially dangerous robotics equipment. Solutions to this problem range from the philosophical approach of treating robots as ethical agents (individuals with moral agency), to the practical approach of creating safety zones. These safety zones use technologies such as lidar to detect human presence or physical barriers to protect humans by preventing any contact between machine and operator. Although initially robots in the human–robot interaction field required some human intervention to function, research has expanded this to the extent that fully autonomous systems are now far more common than in the early 2000s. Autonomous systems include from simultaneous localization and mapping systems which provide intelligent robot movement to natural-language processing and natural-language generation systems which allow for natural, human-esque interaction which meet well-defined psychological benchmarks. Anthropomorphic robots (machines which imitate human body structure) are better described by the biomimetics field, but overlap with HRI in many research applications. Examples of robots which demonstrate this trend include Willow Garage's PR2 robot, the NASA Robonaut, and Honda ASIMO. However, robots in the human–robot interaction field are not limited to human-like robots: Paro and Kismet are both robots designed to elicit emotional response from humans, and so fall into the category of human–robot interaction. Goals in HRI range from industrial manufacturing through Cobots, medical technology through rehabilitation, autism intervention, and elder care devices, entertainment, human augmentation, and human convenience. Future research therefore covers a wide range of fields, much of which focuses on assistive robotics, robot-assisted search-and-rescue, and space exploration. == The goal of friendly human–robot interactions == Robots are artificial agents with capacities of perception and action in the physical world often referred by researchers as workspace. Their use has been generalized in factories but nowadays they tend to be found in the most technologically advanced societies in such critical domains as search and rescue, military battle, mine and bomb detection, scientific exploration, law enforcement, entertainment and hospital care. These new domains of applications imply a closer interaction with the user, sharing the workspace but also goals in terms of task achievement. The subfield of physical human–robot interaction (pHRI) has largely focused on device design to enable people to safely interact with robotic systems but is increasingly developing algorithmic approaches in an attempt to support fluent and expressive interactions between humans and robotic systems. With the advance in AI, the research is focusing on one part towards the safest physical interaction but also on a socially correct interaction, dependent on cultural criteria. The goal is to build an intuitive, and easy communication with the robot through speech, gestures, and facial expressions. Kerstin Dautenhahn refers to friendly Human–robot interaction as "Robotiquette" defining it as the "social rules for robot behaviour (a 'robotiquette') that is comfortable and acceptable to humans" The robot has to adapt itself to our way of expressing desires and orders and not the contrary. But every day environments such as homes have much more complex social rules than those implied by factories or even military environments. Thus, the robot needs perceiving and understanding capacities to build dynamic models of its surroundings. It needs to categorize objects, recognize and locate humans and further recognize their emotions. The need for dynamic capacities pushes forward every sub-field of robotics. Furthermore, by understanding and perceiving social cues, robots can enable collaborative scenarios with humans. For example, with the rapid rise of personal fabrication machines such as desktop 3D printers, laser cutters, etc., entering our homes, scenarios may arise where robots can collaboratively share control, co-ordinate and achieve tasks together. Industrial robots have already been integrated into industrial assembly lines and are collaboratively working with humans. The social impact of such robots have been studied and has indicated that workers still treat robots and social entities, rely on social cues to understand and work together. On the other end of HRI research the cognitive modelling of the "relationship" between human and the robots benefits the psychologists and robotic researchers the user study are often of interests on both sides. This research endeavours part of human society. For effective human – humanoid robot interaction numerous communication skills and related features should be implemented in the design of such artificial agents/systems. == General HRI research == HRI research spans a wide range of fields, some general to the nature of HRI. === Methods for perceiving humans === Methods for perceiving humans in the environment are based on sensor information. Research on sensing components and software led by Microsoft provide useful results for extracting the human kinematics (see Kinect). An example of older technique is to use colour information for example the fact that for light skinned people the hands are lighter than the clothes worn. In any case a human modelled a priori can then be fitted to the sensor data. The robot builds or has (depending on the level of autonomy the robot has) a 3D mapping of its surroundings to which is assigned the humans locations. Most methods intend to build a 3D model through vision of the environment. The proprioception sensors permit the robot to have information over its own state. This information is relative to a reference. Theories of proxemics may be used to perceive and plan around a person's personal space. A speech recognition system is used to interpret human desires or commands. By combining the information inferred by proprioception, sensor and speech the human position and state (standing, seated). In this matter, natural-language processing is concerned with the interactions between computers and human (natural) languages, in particular how to program computers to process and analyze large amounts of natural-language data. For instance, neural-network architectures and learning algorithms that can be applied to various natural-language processing tasks including part-of-speech tagging, chunking, named-entity recognition, and semantic role labeling. === Methods for motion planning === Motion planning in dynamic environments is a challenge that can at the moment only be achieved for robots with 3 to 10 degrees of freedom. Humanoid robots or even 2 armed robots, which can have up to 40 degrees of freedom, are unsuited for dynamic environments with today's technology. However lower-dimensional robots can use the potential field method to compute trajectories which avoid collisions with humans. === Cognitive models and theory of mind === Humans exhibit negative social and emotional responses as well as decreased trust toward some robots that closely, but imperfectly, resemble humans; this phenomenon has been termed the "Uncanny Valley". However recent research in telepresence robots has established that mimicking human body postures and expressive gestures has made the robots likeable and engaging in a remote setting. Further, the presence o

    Read more →
  • Mathematical morphology

    Mathematical morphology

    Mathematical morphology (MM) is a theory and technique for analyzing and processing geometrical structures. It's based on set theory, lattice theory, topology, and random functions. MM is most commonly applied to digital images, but it can be employed as well on graphs, surface meshes, solids, and many other spatial structures. Topological and geometrical continuous-space concepts such as size, shape, convexity, connectivity, and geodesic distance, were introduced by MM on both continuous and discrete spaces. MM is also the foundation of morphological image processing, which consists of a set of operators that transform images according to the above characterizations. The basic morphological operators are erosion, dilation, opening and closing. MM was originally developed for binary images, and was later extended to grayscale functions and images. The subsequent generalization to complete lattices is widely accepted today as MM's theoretical foundation. == History == Mathematical Morphology was developed in 1964 by the collaborative work of Georges Matheron and Jean Serra, at the École des Mines de Paris, France. Matheron supervised the PhD thesis of Serra, devoted to the quantification of mineral characteristics from thin cross sections, and this work resulted in a novel practical approach, as well as theoretical advancements in integral geometry and topology. In 1968, the Centre de Morphologie Mathématique was founded by the École des Mines de Paris in Fontainebleau, France, led by Matheron and Serra. During the rest of the 1960s and most of the 1970s, MM dealt essentially with binary images, treated as sets, and generated a large number of binary operators and techniques: Hit-or-miss transform, dilation, erosion, opening, closing, granulometry, thinning, skeletonization, ultimate erosion, conditional bisector, and others. A random approach was also developed, based on novel image models. Most of the work in that period was developed in Fontainebleau. From the mid-1970s to mid-1980s, MM was generalized to grayscale functions and images as well. Besides extending the main concepts (such as dilation, erosion, etc.) to functions, this generalization yielded new operators, such as morphological gradients, top-hat transform and the Watershed (MM's main segmentation approach). In the 1980s and 1990s, MM gained a wider recognition, as research centers in several countries began to adopt and investigate the method. MM started to be applied to a large number of imaging problems and applications, especially in the field of non-linear filtering of noisy images. In 1986, Serra further generalized MM, this time to a theoretical framework based on complete lattices. This generalization brought flexibility to the theory, enabling its application to a much larger number of structures, including color images, video, graphs, meshes, etc. At the same time, Matheron and Serra also formulated a theory for morphological filtering, based on the new lattice framework. The 1990s and 2000s also saw further theoretical advancements, including the concepts of connections and levelings. In 1993, the first International Symposium on Mathematical Morphology (ISMM) took place in Barcelona, Spain. Since then, ISMMs are organized every 2–3 years: Fontainebleau, France (1994); Atlanta, USA (1996); Amsterdam, Netherlands (1998); Palo Alto, CA, USA (2000); Sydney, Australia (2002); Paris, France (2005); Rio de Janeiro, Brazil (2007); Groningen, Netherlands (2009); Intra (Verbania), Italy (2011); Uppsala, Sweden (2013); Reykjavík, Iceland (2015); Fontainebleau, France (2017); and Saarbrücken, Germany (2019). =

    Read more →
  • BiP (software)

    BiP (software)

    BiP is a freeware instant messaging application developed by Lifecell Ventures Cooperatief U.A., a subsidiary of Turkcell incorporated in the Netherlands. It allows users to send text messages, voice messages and video calling, and it can be downloaded from the App Store, Google Play, and Huawei AppGallery. BiP has over 53 million users worldwide, and was first released in 2013. == Functions == BiP is a secure, and free communication platform. BiP allows making video and audio calls, allows sharing images, videos and location. BiP includes instant translations to 106 languages and exchange rates. President Erdoğan's Communications Office opposed WhatsApp's enforcement of its updated privacy policy and announced that Erdoğan left WhatsApp and opened an account in Telegram and BiP. The Turkish Ministry of National Defense has announced that it will move information groups to BiP for the same reason. == Others == Banglalink announced a BiP messenger partnership in Bangladesh The Communications Office of President Erdoğan opposed WhatsApp's enforcement of its updated privacy policy and announced that Erdoğan left WhatsApp and opened an account in Telegram and BiP. The Turkish Ministry of National Defense has announced that it will move information groups to BiP for the same reason. The CEO of BiP is Burak Akinci. The number of downloads of the app is 80 million globally.

    Read more →
  • Application performance engineering

    Application performance engineering

    Application performance engineering is a method to develop and test application performance in various settings, including mobile computing, the cloud, and conventional information technology (IT). == Methodology == According to the American National Institute of Standards and Technology, nearly four out of every five dollars spent on the total cost of ownership of an application is directly attributable to finding and fixing issues post-deployment. A full one-third of this cost could be avoided with better software testing. Application performance engineering attempts to test software before it is published. While practices vary among organizations, the method attempts to emulate the real-world conditions that software in development will confront, including network deployment and access by mobile devices. Techniques include network virtualization.

    Read more →
  • ACLU Mobile Justice

    ACLU Mobile Justice

    ACLU Mobile Justice was a video live streaming application developed for smartphones by various state chapters of the American Civil Liberties Union. It was intended to allow instant, secure video recording and transmission of interactions with, and perceived abuses by, law enforcement officers. Since its release by the ACLU of California for California residents, other versions of the app have been released for 16 other states and the District of Columbia by their ACLU chapters. It was discontinued in February 2025.

    Read more →
  • WebPlus

    WebPlus

    Serif WebPlus was a website design program for Microsoft Windows, developed by the software company, Serif. It allows users to design, create and upload their website onto the internet without any knowledge of HTML or other web technologies. Much like Microsoft Word, WebPlus uses WYSIWYG drag and drop editing to add and position text, images and links as they would appear on the finished web page. Once a user has designed their site, WebPlus can preview the site in a web browser before uploading the site using the in-built FTP. The software comes with a variety of pre-designed sample websites containing Filler text like Lorem ipsum, which can be used as a template for quickly designing a site. It also provides drawing tools for creating and editing buttons and web graphics. == Free WebPlus Starter Edition == Previously Serif had made available feature limited Starter Editions of their software, based on older versions, which could be obtained and used free of charge. For WebPlus the final free edition was based on version X5 and this was released in September 2012. This continued to be available from Serif's server until it was withdrawn around March 2016. WebPlus was then only available as a paid-for version X8. == Program Withdrawal == In March 2016, Serif announced that WebPlus X8 would be the final version, and that there were no current plans to design an application to replace it. Sales of WebPlus X8 by Serif were ended around December 2016. In early 2018, Serif announced that Serif Web Resources, hosted on Serif servers and required to implement some advanced web-site functionality in WebPlus created sites, would no longer work after 31 August 2018. In 2018, Serif also shutdown the servers that generated the "Plus" software registration numbers on-line from the product version and the individual generated installation number. Serif revealed the alternative was to use a universal master registration number, which is 881887. This is known to work with post 2003 Serif "Plus" software (e.g. verified to work with PagePlus v5.02). However, later Serif "Plus" software still registers itself automatically if within a certain recent period of a previous Serif software registration on the same PC. == Supported platforms == WebPlus was developed for Microsoft Windows "Win32" graphical desktop interface and is fully compatible with Windows XP, Windows Vista (32/64bit), Windows 7 (32/64bit) and Windows 8. == Features == Web hosting to upload websites to the internet with the address www.sitename.webplus.net and email [email protected]. E-Commerce tool to create online stores with providers such as PayPal. Form wizard generates online forms to collect information from website visitors. Add blogs, forums, hit counters, online polls and content management systems to websites using Smart Objects. Google Maps tool embeds maps and optional navigation markers within a website. Site navigation bars adopt a website's structure providing a tool for navigating around the website. Photo gallery groups a collection of images together and displays them as an animated slideshow. Search engine optimization (SEO) tools optimise a websites search ranking with the likes of Google, Yahoo! and Bing. Collect website metrics such as page popularity and number of website hits using Google Analytics. WebPlus X5 introduced a button studio for creating button graphics. Restrict access to specific pages on a website with a secure member's area. WebPlus automatically converts images and graphics into a web targeted format, optimising them for fast download. Embed YouTube videos within a web page. Add animated effects to a website with Animated GIFs, Animated Marquees or by importing Flash videos. Stream news and information feeds to a website using RSS and podcasts. Automated Site Checker analyses and corrects potential problems with a website. AdSense tool incorporates Google AdSense advertisements into a website In-built FTP transfers files onto a web server, uploading a website to the internet. In-built Basic Photo Editor the PhotoLab can make automatic adjustments and "Quick Fix's" to photos. From X5, WebPlus offers image editing and filters, through its PhotoLab and also provides a dedicated background-removal tool in the form of Cutout Studio. Display images, Flash videos and web pages using animated Lightboxes. Filter Effects can be applied to the graphical objects, giving convincing, realistic effects such as glass, metallic, plastic and other 2D/3D filters. WebPlus also provides QuickShapes for creating button and web graphics. These predefined shapes can be quickly modified with sliders to adjust certain parameters, for example creating rounded rectangles, etc. Shapes include: rectangles, ellipses, stars, spirals, cogs, petals, etc.

    Read more →
  • EditDV

    EditDV

    EditDV was a video editing software released by Radius, Inc. in late 1997 as an evolution of their earlier Radius Edit product. EditDV was one of the first products providing professional-quality editing of the then new DV format at a relatively affordable cost ($999 including Radius FireWire capture card) and was named "The Best Video Tool of 1998". Originally EditDV was available for Macintosh only but in February 2000 EditDV 2.0 for Windows was released. With version 3.0 EditDV's name was changed to CineStream. == Features == Originally bundled with a FireWire card, EditDV 1.5 got updated into a less expensive software only package for use with the newer PowerMac G3 that came with a FireWire interface. Later, a scaled down version named EditDV 1.6.1 Unplugged was released as a freeware version next to EditDV 2.0. Unlike many other applications at the time which transcoded video to M-JPEG for editing, EditDV provided lossless native editing of the DV format. Only transitions (such as dissolves or wipes), effects (such as rotating or scaling the video, adjusting the audio level, or adding titles) and filters (such as changing the brightness or color balance) needed to be rendered. This also had the disadvantage to not work with analogue video capture. EditDV was built on top of QuickTime and supported QuickTime filters as well as its own built-in effects and transitions. Effects could be animated using keyframes. EditDV 2.0 worked natively with Quicktime MOV format. For Microsoft Windows users, where the standard was AVI, this required the use of a provided external conversion tool afterwards when AVI was wanted. The user interface had a Project window for organising clips into bins, a Sequence window with a multi-track timeline for arranging clips into a program using three-point editing, and Source and Program monitor windows. A finished program could either be exported as a QuickTime movie or written back to DV tape using the "print to video" command. Version 3.0, then renamed CineStream, shifted towards web designers who wanted to add video streaming interactivity to a website. The new feature called EventStream allowed setting clickable hot spots to link to another location, either to another page with a URL or to another video. This feature distinguished CineStream from the rest of the competition. == Products == The EditDV product family included a number of related products, all sharing a similar name: EditDV Video editing software (Mac and Windows) SoftDV A QuickTime software codec for playing DV media, included as part of EditDV (Mac and Windows) MotoDV PCI-based FireWire interface with DV capture software (Mac and Windows) PhotoDV Software to capture high-quality stills from a DV tape using MotoDV hardware (Mac and Windows) RotoDV Software for rotoscoping (painting over video), released in Sept 1999 (Macintosh only) == Name changes and eventual demise == In 1999, the company Radius Inc. changed its name to Digital Origin. In 2000, Digital Origin Inc (and EditDV) was bought by Media 100. In early 2001, Media 100 released an updated version of EditDV under the new name CineStream 3.0. Later that year (October 2001) Media 100 was bought by Autodesk's Discreet Division. CineStream for Macintosh required classic Mac OS. It was never ported to Mac OS X and faced increasing competition on that platform from Apple's own Final Cut Pro application. Development of EditDV/Cinestream was officially discontinued in 2002.

    Read more →
  • Cognitive philology

    Cognitive philology

    Cognitive philology is the science that studies written and oral texts as the product of human mental processes. Studies in cognitive philology compare documentary evidence emerging from textual investigations with results of experimental research, especially in the fields of cognitive and ecological psychology, neurosciences and artificial intelligence. "The point is not the text, but the mind that made it". Cognitive Philology aims to foster communication between literary, textual, philological disciplines on the one hand and researches across the whole range of the cognitive, evolutionary, ecological and human sciences on the other. Cognitive philology: investigates transmission of oral and written text, and categorization processes which lead to classification of knowledge, mostly relying on the information theory; studies how narratives emerge in so called natural conversation and selective process which lead to the rise of literary standards for storytelling, mostly relying on embodied semantics; explores the evolutive and evolutionary role played by rhythm and metre in human ontogenetic and phylogenetic development and the pertinence of the semantic association during processing of cognitive maps; Provides the scientific ground for multimedia critical editions of literary texts. Among the founding thinkers and noteworthy scholars devoted to such investigations are: Alan Richardson: Studies Theory of Mind in early-modern and contemporary literature. Anatole Pierre Fuksas Benoît de Cornulier David Herman: Professor of English at North Carolina State University and an adjunct professor of linguistics at Duke University. He is the author of "Universal Grammar and Narrative Form" and the editor of "Narratologies: New Perspectives on Narrative Analysis". Domenico Fiormonte François Recanati Gilles Fauconnier, a professor in Cognitive science at the University of California, San Diego. He was one of the founders of cognitive linguistics in the 1970s through his work on pragmatic scales and mental spaces. His research explores the areas of conceptual integration and compressions of conceptual mappings in terms of the emergent structure in language. Julián Santano Moreno Luca Nobile Manfred Jahn in Germany Mark Turner Paolo Canettieri

    Read more →
  • Macromedia FreeHand

    Macromedia FreeHand

    Macromedia FreeHand (formerly Aldus FreeHand) is a discontinued computer application for creating two-dimensional vector graphics oriented primarily to professional illustration, desktop publishing and content creation for the Web. FreeHand was similar in scope, intended market, and functionality to Adobe Illustrator, CorelDRAW and Xara Designer Pro. Because of FreeHand's dedicated page layout and text control features, it also compares to Adobe InDesign and QuarkXPress. Professions using FreeHand include graphic design, illustration, cartography, fashion and textile design, product design, architects, scientific research, and multimedia production. FreeHand was created by Altsys Corporation in 1988 and licensed to Aldus Corporation, which released versions 1 through 4. In 1994, Aldus merged with Adobe Systems and because of the overlapping market with Adobe Illustrator, FreeHand was returned to Altsys by order of the Federal Trade Commission. Altsys was later bought by Macromedia, which released FreeHand versions 5 through 11 (FreeHand MX). In 2005, Adobe Systems acquired Macromedia and its product line which included FreeHand MX, under whose ownership it presently resides. Since 2003, FreeHand development has been discontinued; in the Adobe Systems catalog, FreeHand has been replaced by Adobe Illustrator. FreeHand MX continues to run under Windows 11 and under Mac OS X 10.6 (Snow Leopard) within Rosetta, a PowerPC code emulator, and requires a registration patch supplied by Adobe. FreeHand 10 runs without problems on Mac OS X Snow Leopard with Rosetta enabled, and does not require a registration patch. Later versions of macOS can use a Mac OS X Snow Leopard Server virtual machine to emulate the required PowerPC support. == History == === Altsys and Aldus FreeHand === In 1984, James R. Von Ehr founded Altsys Corporation to develop graphics applications for personal computers. Based in Plano, Texas, the company initially produced font editing and conversion software; Fontastic Plus, Metamorphosis, and the Art Importer. Their premier PostScript font-design package, Fontographer, was released in 1986 and was the first such program on the market. With the PostScript background having been established by Fontographer, Altsys also developed FreeHand (originally called Masterpiece) as a Macintosh Postscript-based illustration program that used Bézier curves for drawing and was similar to Adobe Illustrator. FreeHand was announced as "... a Macintosh graphics program described as having all the features of Adobe's Illustrator plus drawing tools such as those in Mac Paint and Mac Draft and special effects similar to those in Cricket Draw." Seattle's Aldus Corporation acquired a licensing agreement with Altsys Corporation to release FreeHand along with their flagship product, Pagemaker, and Aldus FreeHand 1.0 was released in 1988. FreeHand's product name used intercaps; the F and H were capitalized. The partnership between the two companies continued with Altsys developing FreeHand and with Aldus controlling marketing and sales. After 1988, a competitive exchange between Aldus FreeHand and Adobe Illustrator ensued on the Macintosh platform with each software advancing new tools, achieving better speed, and matching significant features. Windows PC development also allowed Illustrator 2 (aka, Illustrator 88 on the Mac) and FreeHand 3 to release Windows versions to the graphics market. FreeHand 1.0 sold for $495 in 1988. It included the standard drawing tools and features as other draw programs including special effects in fills and screens, text manipulation tools, and full support for CMYK color printing. It was also possible to create and insert PostScript routines anywhere within the program. FreeHand performed in preview mode instead of keyline mode but performance was slower. FreeHand 2.0 sold for $495 in 1989. Besides improving on the features of FreeHand 1.0, FreeHand 2 added faster operation, Pantone colors, stroked text, flexible fill patterns and automatically import graphic assets from other programs. It added accurate control over a color monitor screen display, limited only by its resolution. FreeHand 3.0 sold for $595 in 1991. New features included resizable color, style, and layer panels including an Attributes menu. Also tighter precision of both the existing tools and aligning of objects. FH3 created compound Paths. Text could be converted to paths, applied to an ellipse, or made vertical. Carried over from version 1.0, FreeHand 3 suffered by having text entered into a dialog box instead of directly to the page. In October 1991, a 3.1 upgrade made FreeHand work with System 7 but additionally, it supported pressure-sensitive drawing which offered varying line widths with a users stroke. It improved element manipulation and added more import/export options. FreeHand 4.0 sold for $595 in 1994. Altsys ported FreeHand 3.0 to the NeXT system creating a new program named Virtuoso. Virtuoso continued its development at Altsys and version 2.0 of Virtuoso was feature-equivalent to FreeHand 4 (with the addition of NeXT-specific features such as Services and Display PostScript) and file compatible, with Virtuoso 2 able to open FreeHand 4 files and vice versa. A prominent feature of this version was the ability to type directly into the page and wrap inside or outside any shape. It also included drag-and-drop color imaging, a larger pasteboard, and a user interface that featured floating, rollup panels. The colors palette included a color mixer for adding new colors to the swatch list. Speed increases were made. In the same year of FreeHand 4 release, Adobe Systems announced merger plans with Aldus Corporation for $525 million. Fear about the end of competition between these two leading applications was reported in the media and expressed by customers (Illustrator versus FreeHand and Adobe Photoshop versus Aldus PhotoStyler.) Because of this overlapping of the market, Altsys stepped in by suing Aldus, saying that the merger deal was "a prima facie violation of a non-compete clause within the FreeHand licensing agreement." Altsys CEO Jim Von Ehr explained, "No one loves FreeHand more than we do. We will do whatever it takes to see it survive." The Federal Trade Commission issued a complaint against Adobe Systems on October 18, 1994, ordering a divestiture of FreeHand to "remedy the lessening of competition resulting from the acquisition as alleged in the Commission's complaint," and further, the FTC ordering, "That for a period of ten (10) years from the date on which this order becomes final, respondents shall not, without the prior approval of the Commission, directly or indirectly, through subsidiaries, partnerships, or otherwise .. Acquire any Professional Illustration Software or acquire or enter into any exclusive license to Professional Illustration Software;" (referring to FreeHand.) FreeHand was returned to Altsys with all licensing and marketing rights as well as Aldus FreeHand's customer list. === Macromedia Freehand === By late 1994, Altsys still retained all rights to FreeHand. Despite brief plans to keep it in-house to sell it along with Fontographer and Virtuoso, Altsys reached an agreement with the multimedia software company, Macromedia, to be acquired. This mutual agreement provided FreeHand and Fontographer a new home with ample resources for marketing, sales, and competition against the newly merged Adobe-Aldus company. Altsys would remain in Richardson, Texas, but would be renamed as the Digital Arts Group of Macromedia and was responsible for the continued development of FreeHand. Macromedia received FreeHand's 200,000 customers and expanded its traditional product line of multimedia graphics software to illustration and design graphics software. CEO James Von Ehr became a Macromedia vice-president until 1997 when he left to start another venture. FreeHand 5.0 sold for $595 in 1995. This version featured a more customizable and expanded workspace, multiple views, stronger design and editing tools, a report generator, spell check, paragraph styles, multicolor gradient fills up to 64 colors, speed improvements, and it accepted Illustrator plugins. In September 1995, a 5.5 upgrade added Photoshop plug-in support, PDF import capabilities, the Extract feature, inline graphics to text, improved auto-expanding text containers, the Crop feature, and the Create PICT Image feature. A FreeHand 5.5 upgrade was part of the FreeHand Graphics Studio (a suite that included Fontographer, Macromedia xRes image editing application, and Extreme 3D animation and modeling application). FreeHand 6.0 in 1996. This version only existed in beta. Some Freehand 7 prerelease versions were released under the Freehand 6 tag. FreeHand 7.0 sold for $399 in 1996, or $449 as part of the FreeHand Graphics Studio (see above.) Features included a redesigned user interface that allowed recombining Inspectors, Panel Tabs, Dockable Panels, Smart Cursors,

    Read more →
  • Adobe GoLive

    Adobe GoLive

    Adobe GoLive was a WYSIWYG HTML editor and web site management application from Adobe Systems. It replaced Adobe PageMill as Adobe's primary HTML editor and was itself discontinued in favor of Dreamweaver. The last version of GoLive that Adobe released was GoLive 9. == History == GoLive originated as the flagship product of a company named GoNet Communication, Inc. then based in Menlo Park, California, and the development company GoNet Communications GmbH in Hamburg, Germany, in 1996. Later GoNet changed its name to GoLive Systems, Inc, and the name of its product to GoLive CyberStudio. Adobe acquired GoLive in 1999 and re-branded the GoLive CyberStudio product to what became Adobe GoLive. Adobe took over the Hamburg office as an Adobe development site to continue to develop the product. At the time of the acquisition, CyberStudio was a Macintosh-only application. In the spring of 1999 Adobe released Adobe GoLive for both Macintosh and Microsoft Windows. The first versions of Dreamweaver and CyberStudio were released in a similar timeframe. However, Dreamweaver eventually became the dominant WYSIWYG HTML editor in market share. After the Adobe acquisition of Macromedia (the company that had owned Dreamweaver), GoLive was progressively re-targeted toward Adobe's traditional design market, and the product became better integrated with Adobe's existing suite of design-oriented software products and less focused on the professional web development market. The Adobe CS2 Premium suite contained GoLive CS2. With the release of Creative Suite 3, Adobe integrated Dreamweaver as a replacement for GoLive and released GoLive 9 as a standalone product. In April 2008, Adobe announced that sales and development of GoLive would cease in favor of Dreamweaver. == General description and distinctive aspects == GoLive incorporated a largely modeless workflow that relied heavily on drag-and-drop. Most user interaction was done via a contextual inspector rather than the modal workflow found in Dreamweaver. Among its features were a separate editor for tables that supported nesting, and a two-dimensional panel for applying CSS styles to elements. GoLive supported drag-and-drop of native Adobe Photoshop and Adobe Illustrator files via what the company called "Smart Objects", which then automatically guided the user through saving those files in web-supported formats. Updates to the original Photoshop or Illustrator assets were automatically tracked by GoLive. It also implemented a tool called "Components" which allowed updates to interface elements throughout a site to be updated globally by changing one single file. As a website management tool, GoLive allowed users to transfer and publish content directly from within the application, and allowed individual files to be excluded from uploading. == Features == One of the new features of GoLive version 5 was Dynamic Link, which was a method of creating dynamic, database-driven web content without the need to know a server-side language and with full WYSIWYG support in the GoLive user interface. GoLive had a powerful set of extensibility API which could be used to add additional functionality to the product. The GoLive SDK provided interfaces which allowed developers to use a combination of XML, JavaScript and C/C++ to create plugins for the product. The extensibility API allowed developers access to custom drawing and event handling using JavaScript, as well as a full JavaScript debugger and command line interpreter. This allowed intermediate-level developers using interpreted JavaScript to create sophisticated user interfaces. == Language and framework structure == Adobe GoLive is coded in the C++ programming language. It uses a custom C++ framework called SCL (Simple Class Library) which was initially built from scratch by the engineers at GoLive Systems Inc. The SCL framework was also used in the short-lived Adobe Atmosphere 3D software. == Release history == As the final version, GoLive 9 was discontinued in April 2008.

    Read more →