AI Detector No Login

AI Detector No Login — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Blackmagic Design

Blackmagic Design Pty Ltd is an Australian company that develops digital cinema technology and manufactures professional video production hardware and software. Headquartered in South Melbourne, it is known for producing high-end digital movie cameras and a range of broadcast and post-production equipment. The company also develops software applications, including the DaVinci Resolve application for non-linear video editing, color correction, color grading, visual effects, and audio post-production. == History == Blackmagic Design Pty Ltd was founded on 7 September 2001 by Grant Petty. Its first product, DeckLink, introduced in 2002, was a video capture card for macOS that supported uncompressed 10-bit video, marking a shift toward professional-grade yet affordable video workflows. Subsequent versions—including the DeckLink 2, Pro SDI, HD Plus, and Multibridge—added capabilities such as color correction, Windows support, and compatibility with major editing software like Adobe Premiere Pro, to broaden the product's appeal. At the 2012 NAB Show, Blackmagic announced its first Cinema Camera, a digital movie camera. Blackmagic made several acquisitions over the next decade. In 2009, it acquired da Vinci Systems, known for its color-grading tools. In 2010, it acquired Echolab's ATEM switcher line, in 2014, it added eyeon Software (developer of the Blackmagic Fusion compositing software) and London's Cintel (film scanning and restoration), and in 2016, it acquired Fairlight, an audio technology company known for its CMI synthesizers as well as mixing consoles. == Products == List of all products developed by the company. Editing, Color Correction and Audio Post Production DaVinci Resolve (free version) and DaVinci Resolve Studio (paid version), computer software for non-linear video editing, color correction, color grading, visual effects, and audio post-production. Audio/Video Controller Consoles: Editor Keyboard, Speed Editor, DaVinci Resolve Replay Editor, Micro Panel, Mini Panel, DaVinci Resolve Micro Color Panel, Advanced Panel, Fairlight Console Channel Fader, Fairlight Console Channel Control, Fairlight Console LCD Monitor, Fairlight Console Audio Editor, Fairlight Desktop Audio Editor, Fairlight Desktop Console, Fairlight Audio Interface Cintel Film Scanner (Generations 1-3) Live Production Home Streaming: ATEM Mini, ATEM Mini Pro/ISO, ATEM Mini Extreme, ATEM Mini Extreme ISO (The ATEM Mini series has both HDMI and SDI variants) Production Switchers: ATEM 1,2 & 4 M/E Constellation HD, ATEM 1,2 & 4 M/E Constellation 4K, ATEM Constellation 8K, ATEM 1,2 & 4 M/E Production Studio 4K, ATEM Television Studio HD8 & HD8 ISO Switcher & Camera Controllers: ATEM Camera Control Panel, ATEM 1 M/E Advanced Panel, ATEM 2 M/E Advanced Panel, ATEM 4 M/E Advanced Panel Chroma Keyers: Ultimatte 12 HD Mini, Ultimatte 12 HD, Ultimatte 12 4K, Ultimatte 12 8K Recording and Storage: HyperDeck Studio HD Mini, HyperDeck Studio HD Plus, HyperDeck Studio HD Plus, HyperDeck Studio 4K Pro, HyperDeck Extreme 8K HDR, HyperDeck Extreme 4K HDR, HyperDeck Extreme Control, HyperDeck Shuttle HD, Duplicator 4K, MultiDock 10G, Video Assist 7" 12G HDR, Video Assist 5" 12G HDR Capture and Playback UltraStudio: 3G, HD Mini, 4K Mini, 4K Extreme 3 DeckLink (PCIe cards): Mini Recorder, Mini Monitor, Mini Monitor 4K, Mini Recorder 4K, Duo 2 Mini, Duo 2, Quad 2, SDI 4K, Studio 4K, 4K Extreme 12G, 8K Pro, Quad HDMI Recorder Network Storage Cloud Store Cloud Pod Broadcast Converters Micro Converter: BiDirectional SDI/HDMI 3G wPSU, HDMI to SDI 3G wPSU, SDI to HDMI 3G wPSU, BiDirectional SDI/HDMI 3G, HDMI to SDI 3G, SDI to HDMI 3G Mini Converters: Audio to SDI, Optical Fiber 12G, SDI Multiplex 4K, Quad SDI to HDMI 4K, SDI Distribution 4K, SDI to Analog 4K, Audio to SDI 4K, SDI to Audio 4K, HDMI to SDI 6G, SDI to HDMI 6G Teranex Mini: SDI Distribution 12G, SDI to HDMI 12G, Audio to SDI 12G, SDI to Analog 12G, SDI to HDMI 8K HDR, SDI to DisplayPort 8K HDR 2110 IP Converters Routing and Distribution Videohub
Read more →
Höhere Graphische Bundes-Lehr- und Versuchsanstalt

The Höhere Graphische Bundes-Lehr- und Versuchsanstalt (HGBLuVA) ("Higher Federal Institution for Graphic Education and Research"), now commonly known as "die Graphische", founded in 1888 in Vienna, is a vocational college for professions in visual communication and media technology in Austria. == History == === Opening === Originally set up as a photographic research institute by the President of the Photographic Society, the graphic teaching and research institute (GLV) was created through the incorporation of the photographic school (a department for photographic reproduction processes connected to the Salzburg State Building School) and the Hörwarter general drawing school in Vienna. Since its foundation, it has made an important contribution to the establishment and development of the graphic professions. According to a resolution of March 14, 1887, the City Council of Vienna made three floors of the municipal building in Vienna VII, Westbahnstraße 25, available to the former Schottenfelder Realschule for the establishment of a teaching and research institute for photography and reproduction processes. The k. k. Lehr- und Versuchsanstalt für Photographie und Reproductionsverfahren, founded and directed (1888–1923) by Josef Maria Eder, previously of the Technologische Gewerbemuseum (Museum of Applied Technology), for which he established a Section for Photography and Reproduction Techniques, and the Vienna State Trade School where, recently qualified as a university lecturer, he began teaching chemistry and physics in 1881. It opened on March 1, 1888 with 108 students. In the next school year the number of students rose to 174. In 1890, Eder placed a Wothly solar camera (an early means of enlarging negatives) on the roof. In the context of the history of vocational schools and the applied arts, pioneering educational reforms in Austria from the 1870s created institutions like it outside the format of the classical university, it being a special variation on the “state trade school” (“Staats-Gewerbeschule”). Eder based his institution on earlier foreign models such as the Conservatoire des arts et métiers in Paris (founded 1794), that housed a museum of history and technology and hosted with evening lectures and demonstrations, with lectures in photography commencing in 1891. From 1897 onwards the name Graphische Lehr- und Versuchsanstalt came into being . In 1906, Emperor Franz Joseph granted the school the designation “Imperial and Royal” in the title, and the Republic of Austria confirmed this distinction when the school's Federal Chancellery approved the use of the national coat of arms. === The beginnings === The GLV was instituted on August 27, 1887 "by the highest resolution to approve the activation of this teaching and research institute in Vienna on March 1, 1888". The aim of the institute was the “training of specialist photographers, retouchers, collotype printers, photolithographers, etc., the instruction of artists, scholars and technicians who want to learn photography as an auxiliary science, furthermore the testing of equipment, chemicals and the implementation of independent scientific investigations in the areas of Photochemistry and Related Subjects”. The school consisted of two departments; the Institute for Photography and Reproduction Processes and the Research Institute, and in 1891 the Board of Book Printers and Type Founders pointed out the urgent need to add a department for book printers to the school. In 1897 an additional section for the book and illustration trade was opened, the school called "KK Graphische Lehr- und Versuchsanstalt" was then divided into four sections: Section I: Institute for Photography and Reproduction (corresponds to the former Institute for Photography and Reproduction Processes) Section II: College for the book and illustration trade Section III: Research institute for photochemistry and graphic printing processes (corresponds to the original research institute) Section IV: Collections: graphic collection, library and equipment collection The first original lithographs by famous artists such as Luigi Kasimir and Tina Blau are thanks to the special course for lithography and lithography introduced in 1905 and 'algraphy' - a planographic printing process from an aluminum plate instead of the stone used in lithography - was first taught in Austria in 1896 at the GLV. The specialty course for lithography and lithography existed until 1913/14, after which a specialist course for xylography (wood engraving and woodcuts) was offered. In 1908 the graphic arts department was set up on the top floor of the neighbouring house at Westbahnstraße 27 connected by a spiral staircase still in existence in the courtyard at the current location on Leyserstraße. === Women in the graphic teaching and research institute === From 1908 women were also officially admitted. For the period from 1888 to 1918/19, a total of 718 female students at the Graphische are recorded in the largely preserved class lists. Due to changes and new requirements in the job description, the proportion of women continued to grow, so that in some classes it exceeded two thirds. === The Graphics Department === In 1916, the school statute was changed: all-day lessons with photography internship in the 1st and 2nd years as well as training for disabled people were introduced and a drawing school was added. After the First World War, the school was renamed several times: In 1919 the name was "Deutsch-Österreichische Graphische Lehr- und Versuchsanstalt"; changed in 1920 to "Staatliche Graphische Lehr- und Versuchsanstalt" and in 1923 to "Graphic Education and Research Institute". === The school in the time of National Socialism === The "annexation of Austria by Germany" resulted in organisational restructuring: semesters were introduced and the GLV was made a subordinate level of a university of the graphic arts administered in Leipzig. In 1939 the school became a state graphic teaching and research institute . Up to this point, two thirds of all Austrian postage stamps had been designed and engraved in the Graphische. === Post-war period === In 1945 the period of study at the technical school was extended to four years. In 1948, “manual graphics” became “commercial graphics” followed by an honours year. In 1959, a department A was developed: a three-class specialist department for photography with a master class, and a department B: a specialist department for commercial graphics with four classes and an honours year. Through further school reforms, the university entrance qualification was acquired with the completion of the now five-year course and honours qualification. In 1967, due to a lack of space, the Westbahnstrasse was moved to the new Carl Appel building in Leyserstrasse. === The new building, 1963 === On May 22, 1963, the foundation stone of the new campus was laid in the 14th district in the Breitenseer Strasse, Leyserstrasse and Spallartgasse area (Kommandogebäude Theodor Körner). In 1967 the move to the new building began and in 1968 the official opening coincided with the 80th anniversary of the school. In 1963/64 the first year of the five-year high school for reprography and printing technology began. There was also a four-year technical school. With the advent of personal computers and their use in the graphics industry, change comes first in typesetting and later in image processing, and in 1984 the advent of desktop publishing brought a revolution that permanently challenged the distinction between photographer, typesetter, layout artist and printer. In 1988, the Graphische celebrated its 100th anniversary. The rapid development of technology shaped school events in the 1980s, as did the rapid advance of offset printing - albeit at the expense of Letterpress printing. In reproduction technology, scanner technology for the production of colour separations displaced reprography. === Renovation, 2006 === Due to renovation work on the building in Leyserstraße, the management and the photography, multimedia and graphics departments moved to an alternative location in Vienna's first district at Schellinggasse 13. After the work was completed, the school was relocated in February 2008. == Notable teachers and students ==
Read more →
Temporal resolution

Temporal resolution (TR) refers to the discrete resolution of a measurement with respect to time. It is defined as the amount of time needed to revisit and acquire data for the same location. When applied to remote sensing, this amount of time is influenced by the sensor platform's orbital characteristics and the features of the sensor itself. The temporal resolution is low when the revisiting delay is high and vice versa. Temporal resolution is typically expressed in days. == Physics == Often there is a trade-off between the temporal resolution of a measurement and its spatial resolution, due to Heisenberg's uncertainty principle. In some contexts, such as particle physics, this trade-off can be attributed to the finite speed of light and the fact that it takes a certain period of time for the photons carrying information to reach the observer. In this time, the system might have undergone changes itself. Thus, the longer the light has to travel, the lower the temporal resolution. == Technology == === Computing === In another context, there is often a tradeoff between temporal resolution and computer storage. A transducer may be able to record data every millisecond, but available storage may not allow this, and in the case of 4D PET imaging the resolution may be limited to several minutes. === Electronic displays === In some applications, temporal resolution may instead be equated to the sampling period, or its inverse, the refresh rate, or update frequency in Hertz, of a TV, for example. The temporal resolution is distinct from temporal uncertainty. This would be analogous to conflating image resolution with optical resolution. One is discrete, the other, continuous. The temporal resolution is a resolution somewhat the 'time' dual to the 'space' resolution of an image. In a similar way, the sample rate is equivalent to the pixel pitch on a display screen, whereas the optical resolution of a display screen is equivalent to temporal uncertainty. Note that both this form of image space and time resolutions are orthogonal to measurement resolution, even though space and time are also orthogonal to each other. Both an image or an oscilloscope capture can have a signal-to-noise ratio, since both also have measurement resolution. === Oscilloscopy === An oscilloscope is the temporal equivalent of a microscope, and it is limited by temporal uncertainty the same way a microscope is limited by optical resolution. A digital sampling oscilloscope has also a limitation analogous to image resolution, which is the sample rate. A non-digital non-sampling oscilloscope is still limited by temporal uncertainty. The temporal uncertainty can be related to the maximum frequency of continuous signal the oscilloscope could respond to, called the bandwidth and given in Hertz. But for oscilloscopes, this figure is not the temporal resolution. To reduce confusion, oscilloscope manufacturers use 'Sa/s' instead of 'Hz' to specify the temporal resolution. Two cases for oscilloscopes exist: either the probe settling time is much shorter than the real time sampling rate, or it is much larger. The case where the settling time is the same as the sampling time is usually undesirable in an oscilloscope. It is more typical to prefer a larger ratio either way, or if not, to be somewhat longer than two sample periods. In the case where it is much longer, the most typical case, it dominates the temporal resolution. The shape of the response during the settling time also has as strong effect on the temporal resolution. For this reason probe leads usually offer an arrangement to 'compensate' the leads to alter the trade off between minimal settling time, and minimal overshoot. If it is much shorter, the oscilloscope may be prone to aliasing from radio frequency interference, but this can be removed by repeatedly sampling a repetitive signal and averaging the results together. If the relationship between the 'trigger' time and the sample clock can be controlled with greater accuracy than the sampling time, then it is possible to make a measurement of a repetitive waveform with much higher temporal resolution than the sample period by upsampling each record before averaging. In this case the temporal uncertainty may be limited by clock jitter.
Read more →
Plug compatibility

Plug compatibility is a characteristic of computer hardware that performs exactly like that of another vendor. Manufacturers who made replacements for IBM peripherals were referred to as plug-compatible manufacturers (PCMs). Later plug-compatible mainframe (also PCM) referred to IBM-compatible mainframe computers. PCM can also mean plug-compatible machine or plug-compatible module. == Plug compatibility and peripherals == Before the rise of the plug-compatible peripheral industry, computing systems were either configured with peripherals designed and built by the CPU vendor or designed to use vendor-selected rebadged devices. The first examples of plug-compatible IBM subsystems were tape drives and controls offered by Telex beginning 1965. Memorex in 1968 was first to enter the IBM plug-compatible disk market, followed shortly thereafter by a number of suppliers such as CDC, Itel, and Storage Technology Corporation. This was boosted by the world's largest user of computing equipment, the US General Services Administration, buying plug-compatible equipment. Eventually there were third-party plug-compatible alternatives to most first-party peripherals and first-party system main memory. == Plug compatibility and computer systems == A plug-compatible machine is one that is backward compatible with a prior machine. In particular, a new computer system that is plug-compatible has not only the same connectors and protocol interfaces to peripherals, but also binary-code compatibility—it runs the same software as the old system. A plug compatible manufacturer, or PCM, is a company that makes such products. One recurring theme in plug-compatible systems is the ability to be bug compatible as well. That is, if the forerunner system had software or interface problems, then the successor must have (or simulate) the same problems. Otherwise, the new system may generate unpredictable results, defeating the objective of full compatibility. Thus, it is important for customers to understand the difference between a bug and a feature, where the latter is defined as an intentional modification to the previous system (e.g. higher speed, lighter weight, smaller package, better operator controls, etc.). === Plug compatibility and IBM mainframes === The original example of plug-compatible mainframes was the Amdahl 470 mainframe computer which was plug-compatible with the IBM System 360 and 370, costing millions of dollars to develop. Similar systems were available from Comparex, Fujitsu, and Hitachi. Not all were large systems. Most of these system vendors eventually left the PCM market. In late 1981, there were eight PCM companies, and collectively they had 36 IBM-compatible models. == Non-computer usage of plug compatibility == Plug compatibility may also be used to describe replacement criteria for other components available from multiple sources. For example, a plug-compatible cooling fan may need to have not only the same physical size and shape, but also similar capability, run from the same voltage, use similar power, attach with a standard electrical connector, and have similar mounting arrangements. Some non-conforming units may be re-packaged or modified to meet plug-compatible requirements, as where an adapter plate is provided for mounting, or a different tool and instructions are supplied for installation, and these modifications would be reflected in the bill of materials for such components. Similar issues arise for computer system interfaces when competitors wish to offer an easy upgrade path. In general, plug-compatible systems are designed where industry or de facto standards have rigorously defined the environment, and there is a large installed population of machines that can benefit from third-party enhancements. Plug compatible does not mean identical. However, nothing prevents a company from developing follow-on products that are backward-compatible with its own early products.
Read more →
Super-resolution optical fluctuation imaging

Super-resolution optical fluctuation imaging (SOFI) is a post-processing method for the calculation of super-resolved images from recorded image time series that is based on the temporal correlations of independently fluctuating fluorescent emitters. SOFI has been developed for super-resolution of biological specimen that are labelled with independently fluctuating fluorescent emitters (organic dyes, fluorescent proteins). In comparison to other super-resolution microscopy techniques such as STORM or PALM that rely on single-molecule localization and hence only allow one active molecule per diffraction-limited area (DLA) and timepoint, SOFI does not necessitate a controlled photoswitching and/ or photoactivation as well as long imaging times. Nevertheless, it still requires fluorophores that are cycling through two distinguishable states, either real on-/off-states or states with different fluorescence intensities. In mathematical terms SOFI-imaging relies on the calculation of cumulants, for what two distinguishable ways exist. For one thing an image can be calculated via auto-cumulants that by definition only rely on the information of each pixel itself, and for another thing an improved method utilizes the information of different pixels via the calculation of cross-cumulants. Both methods can increase the final image resolution significantly although the cumulant calculation has its limitations. Actually SOFI is able to increase the resolution in all three dimensions. == Principle == Likewise to other super-resolution methods SOFI is based on recording an image time series on a CCD- or CMOS camera. In contrary to other methods the recorded time series can be substantially shorter, since a precise localization of emitters is not required and therefore a larger quantity of activated fluorophores per diffraction-limited area is allowed. The pixel values of a SOFI-image of the n-th order are calculated from the values of the pixel time series in the form of a n-th order cumulant, whereas the final value assigned to a pixel can be imagined as the integral over a correlation function. The finally assigned pixel value intensities are a measure of the brightness and correlation of the fluorescence signal. Mathematically, the n-th order cumulant is related to the n-th order correlation function, but exhibits some advantages concerning the resulting resolution of the image. Since in SOFI several emitters per DLA are allowed, the photon count at each pixel results from the superposition of the signals of all activated nearby emitters. The cumulant calculation now filters the signal and leaves only highly correlated fluctuations. This provides a contrast enhancement and therefore a background reduction for good measure. As it is implied in the figure on the left the fluorescence source distribution: ∑ k = 1 N δ ( r → − r → k ) ⋅ ε k ⋅ s k ( t ) {\displaystyle \sum _{k=1}^{N}\delta ({\vec {r}}-{\vec {r}}_{k})\cdot \varepsilon _{k}\cdot s_{k}(t)} is convolved with the system's point spread function (PSF) U(r). Hence the fluorescence signal at time t and position r → {\displaystyle {\vec {r}}} is given by F ( r → , t ) = ∑ k = 1 N U ( r → − r → k ) ⋅ ε k ⋅ s k ( t ) . {\displaystyle F({\vec {r}},t)=\sum _{k=1}^{N}U({\vec {r}}-{\vec {r}}_{k})\cdot \varepsilon _{k}\cdot s_{k}(t).} Within the above equations N is the amount of emitters, located at the positions r → k {\displaystyle {\vec {r}}_{k}} with a time-dependent molecular brightness ε k ⋅ s k {\displaystyle \varepsilon _{k}\cdot s_{k}} where ε k {\displaystyle \varepsilon _{k}} is a variable for the constant molecular brightness and s k ( t ) {\displaystyle s_{k}(t)} is a time-dependent fluctuation function. The molecular brightness is just the average fluorescence count-rate divided by the number of molecules within a specific region. For simplification it has to be assumed that the sample is in a stationary equilibrium and therefore the fluorescence signal can be expressed as a zero-mean fluctuation: δ F ( r → , t ) = F ( r → , t ) − ⟨ F ( r → , t ) ⟩ t {\displaystyle \delta F({\vec {r}},t)=F({\vec {r}},t)-\langle F({\vec {r}},t)\rangle _{t}} where ⟨ ⋯ ⟩ t {\displaystyle \langle \cdots \rangle _{t}} denotes time-averaging. The auto-correlation here e.g. the second-order can then be described deductively as follows for a certain time-lag τ {\displaystyle \tau } : δ F ( r → , t ) = ⟨ δ F ( r → , t + τ ) ⋅ δ F ( r → , t ) ⟩ t {\displaystyle \delta F({\vec {r}},t)=\langle \delta F({\vec {r}},t+\tau )\cdot \delta F({\vec {r}},t)\rangle _{t}} From these equations it follows that the PSF of the optical system has to be taken to the power of the order of the correlation. Thus in a second-order correlation the PSF would be reduced along all dimensions by a factor of 2 {\displaystyle {\sqrt {2}}} . As a result, the resolution of the SOFI-images increases according to this factor. === Cumulants versus correlations === Using only the simple correlation function for a reassignment of pixel values, would ascribe to the independency of fluctuations of the emitters in time in a way that no cross-correlation terms would contribute to the new pixel value. Calculations of higher-order correlation functions would suffer from lower-order correlations for what reason it is superior to calculate cumulants, since all lower-order correlation terms vanish. == Cumulant-calculation == === Auto-cumulants === For computational reasons it is convenient to set all time-lags in higher-order cumulants to zero so that a general expression for the n-th order auto-cumulant can be found: A C n ( r → , τ 1 … n − 1 = 0 ) = ∑ k = 1 N U n ( r → − r → k ) ε k n w k ( 0 ) {\displaystyle AC_{n}({\vec {r}},\tau _{1\ldots n-1}=0)=\sum _{k=1}^{N}U^{n}({\vec {r}}-{\vec {r}}_{k})\varepsilon _{k}^{n}w_{k}(0)} w k {\displaystyle w_{k}} is a specific correlation based weighting function influenced by the order of the cumulant and mainly depending on the fluctuation properties of the emitters. Albeit there is no fundamental limitation in calculating very high orders of cumulants and thereby shrinking the FWHM of the PSF there are practical limitations according to the weighting of the values assigned to the final image. Emitters with a higher molecular brightness will show a strong increase in terms of the pixel cumulant value assigned at higher-orders as well as this performance can be expected from a diverse appearance of fluctuations of different emitters. A wide intensity range of the resulting image can therefore be expected and as a result dim emitters can get masked by bright emitters in higher-order images:. The calculation of auto-cumulants can be realized in a very attractive way in a mathematical sense. The n-th order cumulant can be calculated with a basic recursion from moments K n ( r → ) = μ n ( r → ) − ∑ i = 1 n − 1 ( n − 1 i ) K n − i ( r → ) μ i ( r → ) {\displaystyle K_{n}({\vec {r}})=\mu _{n}({\vec {r}})-\sum _{i=1}^{n-1}{\begin{pmatrix}n-1\\i\end{pmatrix}}K_{n-i}({\vec {r}})\mu _{i}({\vec {r}})} where K is a cumulant of the index's order, likewise μ {\displaystyle \mu } represents the moments. The term within the brackets indicates a binomial coefficient. This way of computation is straightforward in comparison with calculating cumulants with standard formulas. It allows for the calculation of cumulants with only little time of computing and is, as it is well implemented, even suitable for the calculation of high-order cumulants on large images. === Cross-cumulants === In a more advanced approach cross-cumulants are calculated by taking the information of several pixels into account. Cross-cumulants can be described as follows: C C n ( r → , τ 1 … n − 1 = 0 ) = ∏ j < l n U ( r → j − r → l n ) ⋅ ∑ i = 1 N U n ( r → i − ∑ k n r → k n ) ε i n w i ( 0 ) {\displaystyle CC_{n}({\vec {r}},\tau _{1\ldots n-1}=0)=\prod _{j Read more →
Vinyl cutter

A vinyl cutter is an entry-level machine for making signs. Computer-designed vector files with patterns and letters are directly cut on the roll of vinyl which is mounted and fed into the vinyl cutter through USB or serial cable. Vinyl cutters are mainly used to make signs, banners and advertisements. Advertisements seen on automobiles and vans are often made with vinyl cut letters. While these machines were designed for cutting vinyl, they can also cut through computer and specialty papers, as well as thicker items like thin sheets of magnet. In addition to sign business, vinyl cutters are commonly used for apparel decoration. To decorate apparel, a vector design needs to be cut in mirror image, weeded, and then heat applied using a commercial heat press or a hand iron for home use. Some businesses use their vinyl cutter to produce both signs and custom apparel. Many crafters also have vinyl cutters for home use. These require little maintenance, and the vinyl can be bought in bulk relatively cheaply. Vinyl cutters are also often used by stencil artists to create single use or reusable stencil art and lettering == How it works == A vinyl cutter is a type of computer-controlled machine tool. The computer controls the movement of a sharp blade over the surface of the material as it would the nozzles of an ink-jet printer. This blade is used to cut out shapes and letters from sheets of thin self-adhesive plastic (vinyl). The vinyl can then be stuck to a variety of surfaces depending on the adhesive and type of material. To cut out a design, a vector-based image must be created using vector drawing software. Some vinyl cutters are marketed to small in-home businesses and require download and use of a proprietary editing software. The design is then sent to the cutter where it cuts along the vector paths laid out in the design. The cutter is capable of moving the blade on an X and Y axis over the material, cutting it into the required shapes. The vinyl material comes in long rolls allowing projects with significant length like banners or billboards to be easily cut. A major limitation with vinyl cutters is that they can only cut shapes from solid colours of vinyl, paper, card or thin plastic sheets such as Mylar. The type and thickness of material will vary for each cutter and how much downforce the cutter is capable of. If the material has no backing, a backing sheet, material or cutting mat and a temporary adhesive are needed to allow the cutter to cut through the material. A design with multiple colours must have each colour cut separately and then layered on top of each other as it is applied to the substrate. This is a process that is often applied in stencil art. Also, since the shapes are cut out of solid colours, photographs and gradients cannot be reproduced with a stand-alone cutter. === Design creation === Designs are created using vector-based software like Adobe Illustrator, FlexiSign, EasyCutPro, or other software. Vector artwork is either drawn with lines, shapes and text or images are vectorized thus create vector shapes. Most cutters (also called plotters) require special software to load/edit the artwork and communicate with the cutter. Computer designed images are loaded onto the vinyl cutter via a wired connection or over a wireless protocol. Then the vinyl is loaded into the machine where it is automatically fed through and cut to follow the set design. The vinyl can be placed on an adhesive mat to stabilize the vinyl when cutting smaller designs. === Types of vinyl === Adhesive vinyl is the type of vinyl used for store windows, car decals, signage, and more. Adhesive vinyl is applied with a transfer medium often called "transfer tape" or "carrier sheet". Heat transfer vinyl is the type of vinyl used to apply a design to fabric including t-shirts, tea towels, canvas bags, and more. Heat Transfer vinyl can be applied using a heat press or an iron, though the constant pressure and heat from a heat press is recommended by experts. === Using other materials === In addition to vinyl some cutters are capable of cutting other materials such as paper, card, plastic sheets and even thin wood. The thickness and type of material that can be cut will depend on the model of the cutter and heavily depends on the downforce. Cricut is a popular home cutter used by arts and craft enthusiasts since it allows for a wide use of different materials and is similar in size to a household printer and has strong downforce for its size. === Backing and cutting mat === If you cut material that doesn't have an adhesive backing you will require a cutting mat that you need to attach your material to. Some cutting mats are sticky, others will require you to use a temporary adhesive and/or masking tape to keep the material in place when cutting. === Cutting === The vinyl cutter uses a small knife or blade to precisely cut the outline of figures into a sheet or piece of vinyl, but not the release liner. The process of cutting vinyl material without penetrating it completely is referred to as "kiss cutting". The knife moves side to side and turns, while the vinyl is moved beneath the knife. The results from the cut process is an image cut into the material. === Weeding === The material is then 'weeded' where the excess parts of the figures are removed from the release liner. It is possible to remove the positive parts, which would give a negative decal, or remove the negative parts, giving a positive decal. Removing the figure would be like removing the positive, giving a negative image of the figures. === Transfer tape === A sheet of transfer tape with an adhesive backing is laid on the weeded vinyl when necessary. Heat Transfer vinyl often does not require use of a separate transfer tape. A roller is applied to the tape, causing it to adhere to the vinyl. The transfer tape and the weeded vinyl is pulled off the release liner, and applied to a substrate, such as a sheet of aluminium. This results in an aluminium sign with vinyl figures. == Uses == In addition to the capabilities of the cutter itself, adhesive vinyl comes in a wide variety of colors and materials including gold and silver foil, vinyl that simulates frosted glass, holographic vinyl, reflective vinyl, thermal transfer material, and even clear vinyl embedded with gold leaf. (Often used in the lettering on fire trucks and rescue vehicles.) As the vinyl film is supplied by the manufacturer, it comes attached to a release liner. == Challenges when cutting on a vinyl cutter == Cutting on a vinyl cutter requires careful calibration to achieve clean and accurate results, especially when the goal is to cut through only the top layer of material while leaving the backing intact. One of the most common challenges is setting the correct cutting depth. If the blade is not lowered enough, the vinyl material may not separate properly; if it goes too deep, it can cut through the backing layer and potentially damage the cutting mat. The cutting depth on the vinyl cutter machines typically does not exceed 1 mm. Another frequent issue is the mismatch between the blade and the type of material being processed. Using an inappropriate blade can lead to uneven cuts, premature dulling of the edge, and torn or frayed material. The overall quality of the output also depends on factors such as the cutting speed, blade sharpening and cutting angle, and the material the knife is made of.
Read more →
Webby Awards

The Webby Awards (colloquially referred to as the Webbys) are awards for excellence on the Internet presented annually by the International Academy of Digital Arts and Sciences, a judging body composed of over three thousand industry experts and technology innovators. Categories include websites, advertising and media, online film and video, mobile sites and apps, and social. Two winners are selected in each category, one by members of The International Academy of Digital Arts and Sciences, and one by the public who cast their votes during Webby People's Voice voting. Each winner presents a five-word acceptance speech, a trademark of the annual awards show. In its early years, the award was hailed as the "Internet's highest honor" and was associated with the phrase "The Oscars of the Internet." == History == In its early years, the organization was one of several vying to be the premiere internet awards show. Both shows would compare themselves to the Oscars, as did media outlets such as The New York Times to Canada's Globe & Mail. The winners of the First Annual Webby Awards in 1995 were presented by John Brancato and Michael Ferris, writers for Columbia Pictures. It was held at the Hollywood Roosevelt Hotel. The televised Webby Awards were sponsored by the Academy of Web Design and Cool Site of the Day. The first Webby Awards were produced by Kay Dangaard at the Hollywood Roosevelt Hotel as a nod to the first site of the Academy of Motion Picture Arts and Sciences (Oscars). That first year, they were called "Webbie" Awards. The first "Site of the Year" winner was the pioneer webisodic serial The Spot. The modern Webby Awards were co-founded by Tiffany Shlain, a filmmaker, when she was hired by The Web Magazine to re-establish them, and were first held in San Francisco in 1997. They quickly became known for its requirement that winners give their acceptance speeches in five words. After this, the awards became more successful than the magazine and IDG closed the publication. Shlain and co-founder Maya Draisin Farrah continued to run The Webby Awards until 2004. The International Academy of Digital Arts and Sciences, which selects the winners of The Webby Awards, was established in 1998 by co-founders Tiffany Shlain, Spencer Ante and Maya Draisin. Members of the Academy include Kevin Spacey, Grimes, Questlove, Internet inventor Vint Cerf, Instagram's Head of Fashion Partnerships Eva Chen, comedian Jimmy Kimmel, Twitter founder Biz Stone, Vice Media co-founder and CEO Shane Smith, Tumblr's David Karp, Director of Harvard's Berkman Klein Center for Internet & Society Susan P. Crawford, Refinery29's Executive Creative Director Piera Gelardi, and CEO and co-founder of Gimlet Media Alex Blumberg. The Webby Awards is owned and operated by the Webby Media Group, a division of Recognition Media, which also owns and produces the Lovie Awards in Europe and Netted by the Webbys, a daily email publication launched in 2009. David-Michel Davies, CEO of Webby Media Group, current Executive Director of the Webby Awards and co-founder of Internet Week New York, was named Executive Director of the Webby Awards in 2005. In 2009, the 13th Annual Webby Awards received nearly 10,000 entries from all 50 US states and over 60 countries. That same year, more than 500,000 votes were cast in The Webby People's Voice Awards. In 2012, the 16th Annual Webby awards received 1.5 million votes from more than 200 countries for the People's Voice awards. In 2015, the 19th Annual Webby Awards received nearly 13,000 entries from all 50 U.S. states and over 60 countries worldwide. == Nomination process == The 2000 awards began the transition to nominee submissions. Previously, nominees had been selected by an internal committee. As early as 2017, organizations wanting to nominate themselves were charged $395 for a single entry. An "ad campaign entry" would cost $595. By 2024, those fees had risen to $495 and $675, respectively. Executive Academy Members with category-specific expertise evaluate the shortlisted entries based on the appropriate Website, Advertising & Media, Online Film & Video, Mobile Sites & Apps, and Social category criteria, and cast ballots to determine Webby Honorees, Nominees and Webby Winners. Deloitte provides vote tabulation consulting for the Webby Awards. In addition to the award given in each category by the International Academy of Digital Arts and Sciences, another winner is selected in each category as determined by the general public during People's Voice voting. Winners of both the Academy-selected and People's Voice-selected awards are invited to the Webbys. == Awards granted == The Webby Awards are presented in over a hundred categories among all four types of entries. A website can be entered in multiple categories and receive multiple awards. In each category, two awards are handed out: a Webby Award selected by The International Academy of Digital Arts and Sciences, and a People's Voice Award selected by the general public. == Ceremony == Between 2005 and 2019, the Webby Awards were presented in New York City. Many of the ceremony hosts are comedians and comedic actors. Comedian Rob Corddry hosted the ceremony from 2005 to 2007. Seth Meyers of Saturday Night Live hosted in 2008 and 2009, B.J. Novak of the sitcom The Office in 2010, and Lisa Kudrow in 2011. Comedian, actor, and writer Patton Oswalt hosted from 2012 to 2014. Comedian Hannibal Buress hosted in 2015. The Webbys are famous for limiting recipients to five-word speeches, which are often humorous, although some exceed the limit. In 2005 when accepting his Lifetime Achievement Award, former Vice President Al Gore's speech was "Please don't recount this vote." He was introduced by Vint Cerf who used the same format to state, "We all invented the Internet." In 2013, the creator of the Graphics Interchange Format (GIF), Steve Wilhite, accepted his Webby and delivered his now famous five-word speech, "It's pronounced 'Jif' not 'Gif'." == Criticism == The Webbys have been criticized for their pay-to-enter and pay-to-attend policy (winners and nominees also have to pay to attend the award ceremony), and thus for not taking most websites into consideration before distributing their awards. Gawker, its Valleywag column, and others, have called the awards a scam, with Valleywag saying, "...somewhere along the way, the organizers figured out that this goofy charade could be milked for profit." In response, Webby Awards executive director David-Michel Davies told the Wall Street Journal that entry fees "provide the best and most sustainable model for ensuring that our judging process remains consistent and rigorous and is not dependent on things like sponsorships that can fluctuate from year to year." == Anthem Awards == In 2021, the Webby organization started a new line of awards, the Anthem Awards, to honor the purpose and mission-driven work of people, companies and organizations worldwide. The finalists and winners are selected by the International Academy of Digital Arts and Sciences.
Read more →
Kimchi (software)

Kimchi is a web management tool to manage Kernel-based Virtual Machine (KVM) infrastructure. Developed with HTML5, Kimchi is developed to intuitively manage KVM guests, create storage pools, manage network interfaces (bridges, VLANs, NAT), and perform other related tasks. The name is an extended acronym for KVM infrastructure management. It is an Apache-licensed project hosted on GitHub, and incubated by oVirt.org.
Read more →
INDIAai

INDIAai is a web portal launched by the Government of India on 07 March 2024 for artificial intelligence-related developments in India. It is known as the National AI Portal of India, which was jointly started by the Ministry of Electronics and Information Technology (MeitY), the National e-Governance Division (NeGD) and the National Association of Software and Service Companies (NASSCOM) with support from the Department of School Education and Literacy (DoSE&L) and Ministry of Human Resource Development. == History == The portal was launched on 30 May 2020, by Ravi Shankar Prasad, the Union Minister for Electronics and IT, Law and Justice and Communications, on the first anniversary of the second tenure of Prime Minister Narendra Modi-led government. A national program for the youth, 'Responsible AI for Youth', was also launched on the same day. As of 2022, the website was visited by more than 4.5 lakh users with 1.2 million page views. It has 1151 articles on artificial intelligence, 701 news stories, 98 reports, 95 case studies and 213 videos on its portal. It maintains a database on AI ecosystem of India featuring 121 government initiatives and 281 startups. In May 2022, INDIAai released a book titled 'AI for Everyone' that covers the basics of AI. Cabinet chaired by the Prime Minister Narendra Modi has approved the comprehensive national-level IndiaAI mission with a budget outlay of Rs.10,371.92 crore. The Mission will be implemented by ‘IndiaAI’ Independent Business Division (IBD) under Digital India Corporation (DIC). == Objective and features == It aims to function as a one-stop portal for all AI-related development in India. The platform publishes resources such as articles, news, interviews, and investment funding news and events for AI startups, AI companies, and educational firms related to artificial intelligence in India. It also distributes documents, case studies, and research reports. Additionally, the platform provides education and employment opportunities related to AI. It offers AI courses, both free and paid.
Read more →
Mike Little

Mike Little (born 12 May 1962) is an English web developer and writer. He is the co-founder of the free and open source web publishing software WordPress. == Biography == Mike Little was born in Manchester, England in 1962 to a Nigerian father, who was a mathematics lecturer and musician, and an English mother who worked as a primary school teacher. Little was placed into foster care when he was four months of age, and was later adopted by the same family. He grew up on a council estate in Brinnington, Stockport, and was educated at Stockport School. In 2003, Little and Matt Mullenweg started working on a project in which they built on b2/cafelog and later named it WordPress, releasing the first version on 27 May 2003. Little states that, despite not being invited to join his co-founder's for-profit business Automattic, he and Mullenweg remain on good terms. He clarified: "I don’t want it to sound like he cheated me out of something or ripped me off in some way. He didn’t." In June 2013, Little was awarded the SAScon's "Outstanding Contribution to Digital" award for his part in co-founding and developing WordPress. Little has been described as "modest" and living in "virtual anonymity". He has one daughter. He identifies as a follower of Stoicism and a humanist, and in 2021, he became a patron of charity Humanists UK.
Read more →
Höhere Graphische Bundes-Lehr- und Versuchsanstalt

The Höhere Graphische Bundes-Lehr- und Versuchsanstalt (HGBLuVA) ("Higher Federal Institution for Graphic Education and Research"), now commonly known as "die Graphische", founded in 1888 in Vienna, is a vocational college for professions in visual communication and media technology in Austria. == History == === Opening === Originally set up as a photographic research institute by the President of the Photographic Society, the graphic teaching and research institute (GLV) was created through the incorporation of the photographic school (a department for photographic reproduction processes connected to the Salzburg State Building School) and the Hörwarter general drawing school in Vienna. Since its foundation, it has made an important contribution to the establishment and development of the graphic professions. According to a resolution of March 14, 1887, the City Council of Vienna made three floors of the municipal building in Vienna VII, Westbahnstraße 25, available to the former Schottenfelder Realschule for the establishment of a teaching and research institute for photography and reproduction processes. The k. k. Lehr- und Versuchsanstalt für Photographie und Reproductionsverfahren, founded and directed (1888–1923) by Josef Maria Eder, previously of the Technologische Gewerbemuseum (Museum of Applied Technology), for which he established a Section for Photography and Reproduction Techniques, and the Vienna State Trade School where, recently qualified as a university lecturer, he began teaching chemistry and physics in 1881. It opened on March 1, 1888 with 108 students. In the next school year the number of students rose to 174. In 1890, Eder placed a Wothly solar camera (an early means of enlarging negatives) on the roof. In the context of the history of vocational schools and the applied arts, pioneering educational reforms in Austria from the 1870s created institutions like it outside the format of the classical university, it being a special variation on the “state trade school” (“Staats-Gewerbeschule”). Eder based his institution on earlier foreign models such as the Conservatoire des arts et métiers in Paris (founded 1794), that housed a museum of history and technology and hosted with evening lectures and demonstrations, with lectures in photography commencing in 1891. From 1897 onwards the name Graphische Lehr- und Versuchsanstalt came into being . In 1906, Emperor Franz Joseph granted the school the designation “Imperial and Royal” in the title, and the Republic of Austria confirmed this distinction when the school's Federal Chancellery approved the use of the national coat of arms. === The beginnings === The GLV was instituted on August 27, 1887 "by the highest resolution to approve the activation of this teaching and research institute in Vienna on March 1, 1888". The aim of the institute was the “training of specialist photographers, retouchers, collotype printers, photolithographers, etc., the instruction of artists, scholars and technicians who want to learn photography as an auxiliary science, furthermore the testing of equipment, chemicals and the implementation of independent scientific investigations in the areas of Photochemistry and Related Subjects”. The school consisted of two departments; the Institute for Photography and Reproduction Processes and the Research Institute, and in 1891 the Board of Book Printers and Type Founders pointed out the urgent need to add a department for book printers to the school. In 1897 an additional section for the book and illustration trade was opened, the school called "KK Graphische Lehr- und Versuchsanstalt" was then divided into four sections: Section I: Institute for Photography and Reproduction (corresponds to the former Institute for Photography and Reproduction Processes) Section II: College for the book and illustration trade Section III: Research institute for photochemistry and graphic printing processes (corresponds to the original research institute) Section IV: Collections: graphic collection, library and equipment collection The first original lithographs by famous artists such as Luigi Kasimir and Tina Blau are thanks to the special course for lithography and lithography introduced in 1905 and 'algraphy' - a planographic printing process from an aluminum plate instead of the stone used in lithography - was first taught in Austria in 1896 at the GLV. The specialty course for lithography and lithography existed until 1913/14, after which a specialist course for xylography (wood engraving and woodcuts) was offered. In 1908 the graphic arts department was set up on the top floor of the neighbouring house at Westbahnstraße 27 connected by a spiral staircase still in existence in the courtyard at the current location on Leyserstraße. === Women in the graphic teaching and research institute === From 1908 women were also officially admitted. For the period from 1888 to 1918/19, a total of 718 female students at the Graphische are recorded in the largely preserved class lists. Due to changes and new requirements in the job description, the proportion of women continued to grow, so that in some classes it exceeded two thirds. === The Graphics Department === In 1916, the school statute was changed: all-day lessons with photography internship in the 1st and 2nd years as well as training for disabled people were introduced and a drawing school was added. After the First World War, the school was renamed several times: In 1919 the name was "Deutsch-Österreichische Graphische Lehr- und Versuchsanstalt"; changed in 1920 to "Staatliche Graphische Lehr- und Versuchsanstalt" and in 1923 to "Graphic Education and Research Institute". === The school in the time of National Socialism === The "annexation of Austria by Germany" resulted in organisational restructuring: semesters were introduced and the GLV was made a subordinate level of a university of the graphic arts administered in Leipzig. In 1939 the school became a state graphic teaching and research institute . Up to this point, two thirds of all Austrian postage stamps had been designed and engraved in the Graphische. === Post-war period === In 1945 the period of study at the technical school was extended to four years. In 1948, “manual graphics” became “commercial graphics” followed by an honours year. In 1959, a department A was developed: a three-class specialist department for photography with a master class, and a department B: a specialist department for commercial graphics with four classes and an honours year. Through further school reforms, the university entrance qualification was acquired with the completion of the now five-year course and honours qualification. In 1967, due to a lack of space, the Westbahnstrasse was moved to the new Carl Appel building in Leyserstrasse. === The new building, 1963 === On May 22, 1963, the foundation stone of the new campus was laid in the 14th district in the Breitenseer Strasse, Leyserstrasse and Spallartgasse area (Kommandogebäude Theodor Körner). In 1967 the move to the new building began and in 1968 the official opening coincided with the 80th anniversary of the school. In 1963/64 the first year of the five-year high school for reprography and printing technology began. There was also a four-year technical school. With the advent of personal computers and their use in the graphics industry, change comes first in typesetting and later in image processing, and in 1984 the advent of desktop publishing brought a revolution that permanently challenged the distinction between photographer, typesetter, layout artist and printer. In 1988, the Graphische celebrated its 100th anniversary. The rapid development of technology shaped school events in the 1980s, as did the rapid advance of offset printing - albeit at the expense of Letterpress printing. In reproduction technology, scanner technology for the production of colour separations displaced reprography. === Renovation, 2006 === Due to renovation work on the building in Leyserstraße, the management and the photography, multimedia and graphics departments moved to an alternative location in Vienna's first district at Schellinggasse 13. After the work was completed, the school was relocated in February 2008. == Notable teachers and students ==
Read more →
Conversion path

A conversion path is a description of the steps taken by a user of a website towards a desired end from the standpoint of the website operator or marketer. The typical conversion path begins with a user arriving at a landing page or a product page and proceeding through a series of page transitions until reaching a final state, either positive (e.g. purchase) or negative (e.g. abandoned session). In practice, the study of the dynamics of this process by the interested party has evolved into a sophisticated field, where various statistical methods are being applied to the optimization of outcomes. This includes real-time adjustment of presented content, in which a website operator tries to provide deliberate incentives to increase the odds of conversion based on various sources of information, including demographic traits, search history, and browsing events. In practice, this reflects in different content presented to users arriving from online advertising versus search engines, and similarly, different content is presented depending on their demographic segments. The fundamental metric describing this process in the aggregate is known as conversion rate.
Read more →
Abiquo Enterprise Edition

Abiquo Hybrid Cloud Management Platform is a web-based cloud computing software platform developed by Abiquo. Written entirely in Java, it is used to build, integrate and manage public and private clouds in homogeneous environments. Users can deploy and manage servers, storage system and network and virtual devices. It also supports LDAP integration. == Hypervisors == Abiquo supports five hypervisor systems. VMware ESXi Microsoft Hyper-V Citrix XenServer Oracle VM Server for x86 KVM From version 3.1, it also supports multiple public cloud providers: Amazon AWS Rackspace Google Compute Engine HP Cloud ElasticHosts DigitalOcean Abiquo version 3.2 added: Microsoft Azure Abiquo version 3.4 added: Support for Docker hosts, adding multi-tenant networking, storage management and private registry management for Docker SoftLayer CloudSigma Later versions continued to add features including autoscaling on any cloud, integration to VMware NSX and OpenStack Neutron for software defined networking, guest config with cloud-init and integrated monitoring driving guest automation. == Storage services == Abiquo supports any vendor for hypervisor storage, and also supports tiered storage pools, enabling storage-as-a-service from specific vendors and technologies including: NFS Generic iSCSI NetApp Nexenta == SAAS version == In April 2014 Abiquo launched Abiquo anyCloud, a SAAS version of the Abiquo Hybrid Cloud Platform software. This version lets users manage public cloud resources from: Amazon AWS Microsoft Azure IBM SoftLayer DigitalOcean Rackspace Open Cloud (an OpenStack cloud) HP Public Cloud (an OpenStack cloud) Google Compute Engine ElasticHosts Additional security and process features include workflow, to have an enterprise administrator electronically sign off on changes, an audit trail of activity and the ability to share cloud accounts among and enterprise team in a secure way. == Reviews and awards == Finalist for the 2015 Cloud Awards Finalist for the 2015 UK Cloud Awards in the category Cloud Management Product of the Year EMA Radar for Private Cloud platforms 2013 Global Telecoms Business Innovation Summit and Awards 2013 (with Interoute) EuroCloud UK Awards
Read more →
Outline of electronics

The following outline is provided as an overview of and topical guide to electronics: Electronics – branch of physics, engineering and technology dealing with electrical circuits that involve active semiconductor components and associated passive interconnection technologies. == Branches == === Classical electronics === Analog electronics Digital electronics Electronic instrumentation Electronic engineering Microelectronics Optoelectronics Power electronics Printed electronics Semiconductor technology Schematic capture Thermal management Automation Electronics === Advanced topics === Atomtronics Bioelectronics Failure modes of electronics Flexible electronics Low-power electronics Microelectromechanical systems (MEMS) Molecular electronics Nanoelectronics Organic electronics Photonics Piezotronics Quantum electronics Spintronics === History of electronics === History of electronic engineering History of radar History of radio History of television == General concepts == === Data converters === Analog-to-digital converters (ADC) Aliasing Successive approximation ADC Dual-slope ADC Quantization Sensor resolution Sampling Delta-sigma ADC Digital-to-analog converters (DAC) Digital potentiometer Binary weighted resistor converter Charge distribution DAC Pulse width modulator Reconstruction filter The R2R ladder === Digital electronics === Binary decision diagrams Boolean algebra Combinational logic Counters (digital) De Morgan's laws Digital circuit Formal verification Karnaugh maps Logic families Logic gate Logic minimization Logic simulation Logic synthesis Registers Sequential logic State machines Truth tables Transparent latch === Electrical element/discretes === Passive elements: Capacitor Inductor Memristor Resistor Transformer Active elements: Diode Zener diode Light-emitting diode PIN diode Schottky diode Avalanche diode Laser diode Microcontroller Operational amplifier Thyristor DIAC TRIAC IGBT Transistor Bipolar transistor (BJT) Field effect transistor (FET) Darlington transistor Other components Aural devices Battery (electricity) Crystal oscillator Electromechanical devices Sensors Surface acoustic wave (SAW) === Electronics analysis === Electronic packaging Electronic circuit simulation Electronic design automation Electronic noise Mathematical methods in electronics Thermal management of electronic devices and systems === Electronic circuits === Amplifiers Differential amplifiers Feedback amplifiers Power amplifiers Comparators Converters Filters Active filters Passive filters Digital filters Oscillators Phase-locked loops Timers === Electronic equipment === Air conditioner Breathalyzer Central heating Clothes dryer Computer/Notebook Dishwasher Freezer Home robot Home entertainment system Information technologies Cooker Microwave oven Refrigerator Robotic vacuum cleaner Tablet Telephone Water heater Washing machine === Television === Analog television History of television Television show Television broadcaster Timeline of the introduction of television in countries Mechanical television Color television Digital television Digital television transition Smart television Streaming television Internet Protocol television 3D television Terrestrial television ==== Television broadcasting ==== === Electronic instrumentation === Ammeter Capacitance meter Distortionmeter Electric energy meter LCR meter Microwave power meter Multimeter Network analyzer Ohmmeter Oscilloscope Psophometer Q meter Signal analyzer Signal generator Spectrum analyzer Transistor tester Tube tester Wattmeter Vectorscope Video signal generator Voltmeter VU meter === Memory technology === Flash memory Hard drive systems Optical storage Probe Storage Programmable read-only memory Read-only memory Solid-state drive (SSD) Volatile memory === Microcontrollers === Features Analog-to-digital converter Central processing unit (CPU) Clock generator (Quartz timing crystal, resonator or RC circuit) Debugging support Digital-to-analog converters Discrete input and output bits In-circuit programming Non-volatile memory (ROM, EPROM, EEPROM or Flash) Peripherals (Timers, event counters, PWM generators, and watchdog) Serial interface (Input/output such as serial ports (UARTs)) Serial communications (I²C, Serial Peripheral Interface and Controller Area Network) Volatile memory (RAM) 8-bit microcontroller families: AVR - PIC - COP8 - MCS-48 - MCS-51 - Z8 - eZ80 - HC08 - HC11 - H8 - PSoC Some notable suppliers: ARM Atmel Cypress Semiconductor Freescale Intel MIPS Microchip Technology NXP Semiconductors Parallax Propeller PowerPC Rabbit 2000 Renesas RX, V850 Silicon Laboratories STMicroelectronics Texas Instruments Toshiba TLCS === Optoelectronics === Optical fiber Optical properties Optical receivers Optical system design Optical transmitters === Physical laws === Ampère's law Coulomb's law Faraday's law of induction/Faraday-Lenz law Gauss's law Kirchhoff's circuit laws Current law Voltage law Maxwell's equations Gauss's law Faraday's law of induction Ampère's law Ohm's law === Power electronics === Power Devices Gate turn-off thyristor MOS-controlled thyristor (MCT) Power BJT/MOSFET Static induction devices Electric power conversion DC to DC DC to DC converter Voltage stabiliser Linear regulator AC to DC Rectifier Mains power supply unit (PSU) Switched-mode power supply DC to AC Inverter AC to AC Cycloconverter Transformer Variable frequency transformer Voltage converter Voltage regulator Power applications Automotive applications Capacitor charging applications Electronic ballasts Energy harvesting technologies Flexible AC transmission systems (FACTS) High frequency inverters HVDC transmission Motor controller Photovoltaic system Conversion Power factor correction circuits Power supply Renewable energy sources Switching power converters Uninterruptible power supply Wind power === Programmable devices === Application-specific integrated circuit (ASIC) Complex programmable logic device (CPLD) Erasable programmable logic device (EPLD) Simple programmable logic device (SPLD) Macrocell array Programmable array logic (PAL) Programmable logic array (PLA) Programmable logic device (PLD) Field-programmable gate array (FPGA) VHSIC Hardware Description Language (VHDL) Verilog Hardware Description Language Some notable suppliers: Altera - Atmel - Cypress Semiconductor - Lattice Semiconductor - Xilinx === Semiconductors theory === Properties Bipolar junction transistors Capacitance voltage profiling Charge carrier Charge-transfer complex Deep-level transient spectroscopy Depletion region Density of states Diode modelling Direct band gap Electronic band structure Energy level Exciton Field-effect transistors Metal–semiconductor junction MOSFETs N-type semiconductor Organic semiconductors P–n junction P-type semiconductor Photoelectric effect Quantum tunneling Semiconductor chip Semiconductor detector Solar cell Transistor model Thin film Tight-binding model Device Fabrication Semiconductor device fabrication Semiconductor industry Semiconductor consolidation == Applications == Audio electronics Automotive electronics Avionics Control Systems Consumer electronics Data acquisition E-health Electronic book Electronics industry Electronic warfare Embedded systems Home automation Integrated circuits Marine electronics Microwave technology Military electronics Multimedia Nuclear electronics Open hardware Radar and Radionavigation Radio electronics Terahertz technology Video hardware Wired and Wireless Communications
Read more →
Plug compatibility

Plug compatibility is a characteristic of computer hardware that performs exactly like that of another vendor. Manufacturers who made replacements for IBM peripherals were referred to as plug-compatible manufacturers (PCMs). Later plug-compatible mainframe (also PCM) referred to IBM-compatible mainframe computers. PCM can also mean plug-compatible machine or plug-compatible module. == Plug compatibility and peripherals == Before the rise of the plug-compatible peripheral industry, computing systems were either configured with peripherals designed and built by the CPU vendor or designed to use vendor-selected rebadged devices. The first examples of plug-compatible IBM subsystems were tape drives and controls offered by Telex beginning 1965. Memorex in 1968 was first to enter the IBM plug-compatible disk market, followed shortly thereafter by a number of suppliers such as CDC, Itel, and Storage Technology Corporation. This was boosted by the world's largest user of computing equipment, the US General Services Administration, buying plug-compatible equipment. Eventually there were third-party plug-compatible alternatives to most first-party peripherals and first-party system main memory. == Plug compatibility and computer systems == A plug-compatible machine is one that is backward compatible with a prior machine. In particular, a new computer system that is plug-compatible has not only the same connectors and protocol interfaces to peripherals, but also binary-code compatibility—it runs the same software as the old system. A plug compatible manufacturer, or PCM, is a company that makes such products. One recurring theme in plug-compatible systems is the ability to be bug compatible as well. That is, if the forerunner system had software or interface problems, then the successor must have (or simulate) the same problems. Otherwise, the new system may generate unpredictable results, defeating the objective of full compatibility. Thus, it is important for customers to understand the difference between a bug and a feature, where the latter is defined as an intentional modification to the previous system (e.g. higher speed, lighter weight, smaller package, better operator controls, etc.). === Plug compatibility and IBM mainframes === The original example of plug-compatible mainframes was the Amdahl 470 mainframe computer which was plug-compatible with the IBM System 360 and 370, costing millions of dollars to develop. Similar systems were available from Comparex, Fujitsu, and Hitachi. Not all were large systems. Most of these system vendors eventually left the PCM market. In late 1981, there were eight PCM companies, and collectively they had 36 IBM-compatible models. == Non-computer usage of plug compatibility == Plug compatibility may also be used to describe replacement criteria for other components available from multiple sources. For example, a plug-compatible cooling fan may need to have not only the same physical size and shape, but also similar capability, run from the same voltage, use similar power, attach with a standard electrical connector, and have similar mounting arrangements. Some non-conforming units may be re-packaged or modified to meet plug-compatible requirements, as where an adapter plate is provided for mounting, or a different tool and instructions are supplied for installation, and these modifications would be reflected in the bill of materials for such components. Similar issues arise for computer system interfaces when competitors wish to offer an easy upgrade path. In general, plug-compatible systems are designed where industry or de facto standards have rigorously defined the environment, and there is a large installed population of machines that can benefit from third-party enhancements. Plug compatible does not mean identical. However, nothing prevents a company from developing follow-on products that are backward-compatible with its own early products.
Read more →