The Höhere Graphische Bundes-Lehr- und Versuchsanstalt (HGBLuVA) ("Higher Federal Institution for Graphic Education and Research"), now commonly known as "die Graphische", founded in 1888 in Vienna, is a vocational college for professions in visual communication and media technology in Austria. == History == === Opening === Originally set up as a photographic research institute by the President of the Photographic Society, the graphic teaching and research institute (GLV) was created through the incorporation of the photographic school (a department for photographic reproduction processes connected to the Salzburg State Building School) and the Hörwarter general drawing school in Vienna. Since its foundation, it has made an important contribution to the establishment and development of the graphic professions. According to a resolution of March 14, 1887, the City Council of Vienna made three floors of the municipal building in Vienna VII, Westbahnstraße 25, available to the former Schottenfelder Realschule for the establishment of a teaching and research institute for photography and reproduction processes. The k. k. Lehr- und Versuchsanstalt für Photographie und Reproductionsverfahren, founded and directed (1888–1923) by Josef Maria Eder, previously of the Technologische Gewerbemuseum (Museum of Applied Technology), for which he established a Section for Photography and Reproduction Techniques, and the Vienna State Trade School where, recently qualified as a university lecturer, he began teaching chemistry and physics in 1881. It opened on March 1, 1888 with 108 students. In the next school year the number of students rose to 174. In 1890, Eder placed a Wothly solar camera (an early means of enlarging negatives) on the roof. In the context of the history of vocational schools and the applied arts, pioneering educational reforms in Austria from the 1870s created institutions like it outside the format of the classical university, it being a special variation on the “state trade school” (“Staats-Gewerbeschule”). Eder based his institution on earlier foreign models such as the Conservatoire des arts et métiers in Paris (founded 1794), that housed a museum of history and technology and hosted with evening lectures and demonstrations, with lectures in photography commencing in 1891. From 1897 onwards the name Graphische Lehr- und Versuchsanstalt came into being . In 1906, Emperor Franz Joseph granted the school the designation “Imperial and Royal” in the title, and the Republic of Austria confirmed this distinction when the school's Federal Chancellery approved the use of the national coat of arms. === The beginnings === The GLV was instituted on August 27, 1887 "by the highest resolution to approve the activation of this teaching and research institute in Vienna on March 1, 1888". The aim of the institute was the “training of specialist photographers, retouchers, collotype printers, photolithographers, etc., the instruction of artists, scholars and technicians who want to learn photography as an auxiliary science, furthermore the testing of equipment, chemicals and the implementation of independent scientific investigations in the areas of Photochemistry and Related Subjects”. The school consisted of two departments; the Institute for Photography and Reproduction Processes and the Research Institute, and in 1891 the Board of Book Printers and Type Founders pointed out the urgent need to add a department for book printers to the school. In 1897 an additional section for the book and illustration trade was opened, the school called "KK Graphische Lehr- und Versuchsanstalt" was then divided into four sections: Section I: Institute for Photography and Reproduction (corresponds to the former Institute for Photography and Reproduction Processes) Section II: College for the book and illustration trade Section III: Research institute for photochemistry and graphic printing processes (corresponds to the original research institute) Section IV: Collections: graphic collection, library and equipment collection The first original lithographs by famous artists such as Luigi Kasimir and Tina Blau are thanks to the special course for lithography and lithography introduced in 1905 and 'algraphy' - a planographic printing process from an aluminum plate instead of the stone used in lithography - was first taught in Austria in 1896 at the GLV. The specialty course for lithography and lithography existed until 1913/14, after which a specialist course for xylography (wood engraving and woodcuts) was offered. In 1908 the graphic arts department was set up on the top floor of the neighbouring house at Westbahnstraße 27 connected by a spiral staircase still in existence in the courtyard at the current location on Leyserstraße. === Women in the graphic teaching and research institute === From 1908 women were also officially admitted. For the period from 1888 to 1918/19, a total of 718 female students at the Graphische are recorded in the largely preserved class lists. Due to changes and new requirements in the job description, the proportion of women continued to grow, so that in some classes it exceeded two thirds. === The Graphics Department === In 1916, the school statute was changed: all-day lessons with photography internship in the 1st and 2nd years as well as training for disabled people were introduced and a drawing school was added. After the First World War, the school was renamed several times: In 1919 the name was "Deutsch-Österreichische Graphische Lehr- und Versuchsanstalt"; changed in 1920 to "Staatliche Graphische Lehr- und Versuchsanstalt" and in 1923 to "Graphic Education and Research Institute". === The school in the time of National Socialism === The "annexation of Austria by Germany" resulted in organisational restructuring: semesters were introduced and the GLV was made a subordinate level of a university of the graphic arts administered in Leipzig. In 1939 the school became a state graphic teaching and research institute . Up to this point, two thirds of all Austrian postage stamps had been designed and engraved in the Graphische. === Post-war period === In 1945 the period of study at the technical school was extended to four years. In 1948, “manual graphics” became “commercial graphics” followed by an honours year. In 1959, a department A was developed: a three-class specialist department for photography with a master class, and a department B: a specialist department for commercial graphics with four classes and an honours year. Through further school reforms, the university entrance qualification was acquired with the completion of the now five-year course and honours qualification. In 1967, due to a lack of space, the Westbahnstrasse was moved to the new Carl Appel building in Leyserstrasse. === The new building, 1963 === On May 22, 1963, the foundation stone of the new campus was laid in the 14th district in the Breitenseer Strasse, Leyserstrasse and Spallartgasse area (Kommandogebäude Theodor Körner). In 1967 the move to the new building began and in 1968 the official opening coincided with the 80th anniversary of the school. In 1963/64 the first year of the five-year high school for reprography and printing technology began. There was also a four-year technical school. With the advent of personal computers and their use in the graphics industry, change comes first in typesetting and later in image processing, and in 1984 the advent of desktop publishing brought a revolution that permanently challenged the distinction between photographer, typesetter, layout artist and printer. In 1988, the Graphische celebrated its 100th anniversary. The rapid development of technology shaped school events in the 1980s, as did the rapid advance of offset printing - albeit at the expense of Letterpress printing. In reproduction technology, scanner technology for the production of colour separations displaced reprography. === Renovation, 2006 === Due to renovation work on the building in Leyserstraße, the management and the photography, multimedia and graphics departments moved to an alternative location in Vienna's first district at Schellinggasse 13. After the work was completed, the school was relocated in February 2008. == Notable teachers and students ==
Astrostatistics
Astrostatistics is a discipline which spans astrophysics, statistical analysis and data mining. It is used to process the vast amount of data produced by automated scanning of the cosmos, to characterize complex datasets, and to link astronomical data to astrophysical theory. Many branches of statistics are involved in astronomical analysis including nonparametrics, multivariate regression and multivariate classification, time series analysis, and especially Bayesian inference. The field is closely related to astroinformatics.
AS1 (networking)
AS1 (Applicability Statement 1) is a specification about how to transport structured business-to-business data securely and reliably over the Internet. Security is achieved by using digital certificates and encryption. == AS1 technical overview == The AS1 protocol is based on SMTP and S/MIME. It was the first AS protocol developed and uses signing, encryption and MDN conventions. In other words: Files are sent as "attachments" in a specially coded SMIME email message Messages can be signed, but do not have to be Messages can be encrypted, but do not have to be Messages may request an MDN back if all went well, but do not have to request such a message If the original AS1 message requested an MDN... Upon the receipt of the message and its successful decryption or signature validation (as necessary) a "success" MDN will be sent back to the original sender. This MDN is typically signed but not encrypted. Upon the receipt and successful verification of the signature on the MDN, the original sender will "know" that the recipient got their message (this provides the "Non-repudiation" element of AS1) If there are any problems receiving or interpreting the original AS1 message, a "failed" MDN may be sent back. Like any other AS file transfer, AS1 file transfers typically require both sides of the exchange to trade X.509 certificates and specific "trading partner" names before any transfers can take place.
Data analysis
Data analysis is the process of inspecting, cleansing, transforming, and modeling data with the goal of discovering useful information, informing conclusions, and supporting decision-making. Data analysis has multiple facets and approaches, encompassing diverse techniques under a variety of names, and is used in different business, science, and social science domains. In today's business world, data analysis plays an important role in making decisions more scientific and helping businesses operate more effectively. It is widely used in fields such as business analytics, healthcare, and artificial intelligence to extract meaningful insights from data. Data mining is a particular data analysis technique that focuses on statistical modeling and knowledge discovery for predictive rather than purely descriptive purposes, while business intelligence covers data analysis that relies heavily on aggregation, focusing mainly on business information. In statistical applications, data analysis can be divided into descriptive statistics, exploratory data analysis (EDA), and confirmatory data analysis (CDA). EDA focuses on discovering new features in the data, while CDA focuses on confirming or falsifying existing hypotheses. Predictive analytics focuses on the application of statistical models for predictive forecasting or classification, while text analytics applies statistical, linguistic, and structural techniques to extract and classify information from textual sources, a variety of unstructured data. All of the above are varieties of data analysis. == Data analysis process == Data analysis is a process for obtaining raw data, and subsequently converting it into information useful for decision-making by users. Statistician John Tukey, defined data analysis in 1961, as:"Procedures for analyzing data, techniques for interpreting the results of such procedures, ways of planning the gathering of data to make its analysis easier, more precise or more accurate, and all the machinery and results of (mathematical) statistics which apply to analyzing data." There are several phases, and they are iterative, in that feedback from later phases may result in additional work in earlier phases. === Data requirements === The data is necessary as inputs to the analysis, which is specified based upon the requirements of those directing the analytics (or customers, who will use the finished product of the analysis). The general type of entity upon which the data will be collected is referred to as an experimental unit (e.g., a person or population of people). Specific variables regarding a population (e.g., age and income) may be specified and obtained. Data may be numerical or categorical (i.e., a text label for numbers). === Data collection === Data may be collected from a variety of sources. A list of data sources are available for study & research. The requirements may be communicated by analysts to custodians of the data; such as, Information Technology personnel within an organization. Data collection or data gathering is the process of gathering and measuring information on targeted variables in an established system, which then enables one to answer relevant questions and evaluate outcomes. The data may also be collected from sensors in the environment, including traffic cameras, satellites, recording devices, etc. It may also be obtained through interviews, downloads from online sources, or reading documentation. === Data processing === Data integration is a precursor to data analysis: Data, when initially obtained, must be processed or organized for analysis. For instance, this may involve placing data into rows and columns in a table format (known as structured data) for further analysis, often through the use of spreadsheet (e.g. Excel) or statistical software. === Data cleaning === Once processed and organized, the data may be incomplete, contain duplicates, or contain errors. The need for data cleaning will arise from problems in the way that the data is entered and stored. Data cleaning is the process of preventing and correcting these errors. Common tasks include record matching, identifying inaccuracy of data, overall quality of existing data, deduplication, and column segmentation. Such data problems can also be identified through a variety of analytical techniques. For example; with financial information, the totals for particular variables may be compared against separately published numbers that are believed to be reliable. Unusual amounts, above or below predetermined thresholds, may also be reviewed. There are several types of data cleaning that are dependent upon the type of data in the set; this could be phone numbers, email addresses, employers, or other values. Quantitative data methods for outlier detection can be used to get rid of data that appears to have a higher likelihood of being input incorrectly. Text data spell checkers can be used to lessen the amount of mistyped words. However, it is harder to tell if the words are contextually (i.e., semantically and idiomatically) correct. === Exploratory data analysis === Once the datasets are cleaned, they can then begin to be analyzed using exploratory data analysis. The process of data exploration may result in additional data cleaning or additional requests for data; thus, the initialization of the iterative phases mentioned above. Descriptive statistics, such as the average, median, and standard deviation, are often used to broadly characterize the data. Data visualization is also used, in which the analyst is able to examine the data in a graphical format in order to obtain additional insights about messages within the data. === Modeling and algorithms === Mathematical formulas or mathematical models (supported by algorithms) may be applied to the data in order to identify relationships among the variables; for example, checking for correlation and by determining whether or not there is the presence of causality. In general terms, models may be developed to evaluate a specific variable based on other variable(s) contained within the dataset, with some residual error depending on the implemented model's accuracy (e.g., Data = Model + Error). Inferential statistics utilizes techniques that measure the relationships between particular variables. For example, regression analysis may be used to model whether a change in advertising (independent variable X), provides an explanation for the variation in sales (dependent variable Y), i.e. is Y a function of X? This can be described as (Y = aX + b + error), where the model is designed such that (a) and (b) minimize the error when the model predicts Y for a given range of values of X. === Data product === A data product is a computer application that takes data inputs and generates outputs, feeding them back into the environment. It may be based on a model or algorithm. For instance, an application that analyzes data about customer purchase history, and uses the results to recommend other purchases the customer might enjoy. === Communication === Once data is analyzed, it may be presented in many formats to the users of the analysis to support their requirements. The users may have feedback, which results in additional analysis. When determining how to communicate the results, the analyst may consider implementing a variety of data visualization techniques to help communicate the message more clearly and efficiently to the audience. Data visualization uses information displays (graphics such as, tables and charts) to help communicate key messages contained in the data. Tables are a valuable tool by enabling the ability of a user to query and focus on specific numbers; while charts (e.g., bar charts or line charts), may help explain the quantitative messages contained in the data. == Quantitative messages == Stephen Few described eight types of quantitative messages that users may attempt to communicate from a set of data, including the associated graphs. Time-series: A single variable is captured over a period of time, such as the unemployment rate over a 10-year period. A line chart may be used to demonstrate the trend. Ranking: Categorical subdivisions are ranked in ascending or descending order, such as a ranking of sales performance (the measure) by salespersons (the category, with each salesperson a categorical subdivision) during a single period. A bar chart may be used to show the comparison across the salespersons. Part-to-whole: Categorical subdivisions are measured as a ratio to the whole (i.e., a percentage out of 100%). A pie chart or bar chart can show the comparison of ratios, such as the market share represented by competitors in a market. Deviation: Categorical subdivisions are compared against a reference, such as a comparison of actual vs. budget expenses for several departments of a business for a given time period. A bar chart can show the comparison of the actual versus the reference amount. Frequency distribution:
Data validation and reconciliation
Industrial process data validation and reconciliation, or more briefly, process data reconciliation (PDR), is a technology that uses process information and mathematical methods in order to automatically ensure data validation and reconciliation by correcting measurements in industrial processes. The use of PDR allows for extracting accurate and reliable information about the state of industry processes from raw measurement data and produces a single consistent set of data representing the most likely process operation. == Models, data and measurement errors == Industrial processes, for example chemical or thermodynamic processes in chemical plants, refineries, oil or gas production sites, or power plants, are often represented by two fundamental means: Models that express the general structure of the processes, Data that reflects the state of the processes at a given point in time. Models can have different levels of detail, for example one can incorporate simple mass or compound conservation balances, or more advanced thermodynamic models including energy conservation laws. Mathematically the model can be expressed by a nonlinear system of equations F ( y ) = 0 {\displaystyle F(y)=0\,} in the variables y = ( y 1 , … , y n ) {\displaystyle y=(y_{1},\ldots ,y_{n})} , which incorporates all the above-mentioned system constraints (for example the mass or heat balances around a unit). A variable could be the temperature or the pressure at a certain place in the plant. === Error types === Data originates typically from measurements taken at different places throughout the industrial site, for example temperature, pressure, volumetric flow rate measurements etc. To understand the basic principles of PDR, it is important to first recognize that plant measurements are never 100% correct, i.e. raw measurement y {\displaystyle y\,} is not a solution of the nonlinear system F ( y ) = 0 {\displaystyle F(y)=0\,\!} . When using measurements without correction to generate plant balances, it is common to have incoherencies. Measurement errors can be categorized into two basic types: random errors due to intrinsic sensor accuracy and systematic errors (or gross errors) due to sensor calibration or faulty data transmission. Random errors means that the measurement y {\displaystyle y\,\!} is a random variable with mean y ∗ {\displaystyle y^{}\,\!} , where y ∗ {\displaystyle y^{}\,\!} is the true value that is typically not known. A systematic error on the other hand is characterized by a measurement y {\displaystyle y\,\!} which is a random variable with mean y ¯ {\displaystyle {\bar {y}}\,\!} , which is not equal to the true value y ∗ {\displaystyle y^{}\,} . For ease in deriving and implementing an optimal estimation solution, and based on arguments that errors are the sum of many factors (so that the Central limit theorem has some effect), data reconciliation assumes these errors are normally distributed. Other sources of errors when calculating plant balances include process faults such as leaks, unmodeled heat losses, incorrect physical properties or other physical parameters used in equations, and incorrect structure such as unmodeled bypass lines. Other errors include unmodeled plant dynamics such as holdup changes, and other instabilities in plant operations that violate steady state (algebraic) models. Additional dynamic errors arise when measurements and samples are not taken at the same time, especially lab analyses. The normal practice of using time averages for the data input partly reduces the dynamic problems. However, that does not completely resolve timing inconsistencies for infrequently-sampled data like lab analyses. This use of average values, like a moving average, acts as a low-pass filter, so high frequency noise is mostly eliminated. The result is that, in practice, data reconciliation is mainly making adjustments to correct systematic errors like biases. === Necessity of removing measurement errors === ISA-95 is the international standard for the integration of enterprise and control systems It asserts that: Data reconciliation is a serious issue for enterprise-control integration. The data have to be valid to be useful for the enterprise system. The data must often be determined from physical measurements that have associated error factors. This must usually be converted into exact values for the enterprise system. This conversion may require manual, or intelligent reconciliation of the converted values [...]. Systems must be set up to ensure that accurate data are sent to production and from production. Inadvertent operator or clerical errors may result in too much production, too little production, the wrong production, incorrect inventory, or missing inventory. == History == PDR has become more and more important due to industrial processes that are becoming more and more complex. PDR started in the early 1960s with applications aiming at closing material balances in production processes where raw measurements were available for all variables. At the same time the problem of gross error identification and elimination has been presented. In the late 1960s and 1970s unmeasured variables were taken into account in the data reconciliation process., PDR also became more mature by considering general nonlinear equation systems coming from thermodynamic models., , Quasi steady state dynamics for filtering and simultaneous parameter estimation over time were introduced in 1977 by Stanley and Mah. Dynamic PDR was formulated as a nonlinear optimization problem by Liebman et al. in 1992. == Data reconciliation == Data reconciliation is a technique that targets at correcting measurement errors that are due to measurement noise, i.e. random errors. From a statistical point of view the main assumption is that no systematic errors exist in the set of measurements, since they may bias the reconciliation results and reduce the robustness of the reconciliation. Given n {\displaystyle n} measurements y i {\displaystyle y_{i}} , data reconciliation can mathematically be expressed as an optimization problem of the following form: min x , y ∗ ∑ i = 1 n ( y i ∗ − y i σ i ) 2 subject to F ( x , y ∗ ) = 0 y min ≤ y ∗ ≤ y max x min ≤ x ≤ x max , {\displaystyle {\begin{aligned}\min _{x,y^{}}&\sum _{i=1}^{n}\left({\frac {y_{i}^{}-y_{i}}{\sigma _{i}}}\right)^{2}\\{\text{subject to }}&F(x,y^{})=0\\&y_{\min }\leq y^{}\leq y_{\max }\\&x_{\min }\leq x\leq x_{\max },\end{aligned}}\,\!} where y i ∗ {\displaystyle y_{i}^{}\,\!} is the reconciled value of the i {\displaystyle i} -th measurement ( i = 1 , … , n {\displaystyle i=1,\ldots ,n\,\!} ), y i {\displaystyle y_{i}\,\!} is the measured value of the i {\displaystyle i} -th measurement ( i = 1 , … , n {\displaystyle i=1,\ldots ,n\,\!} ), x j {\displaystyle x_{j}\,\!} is the j {\displaystyle j} -th unmeasured variable ( j = 1 , … , m {\displaystyle j=1,\ldots ,m\,\!} ), and σ i {\displaystyle \sigma _{i}\,\!} is the standard deviation of the i {\displaystyle i} -th measurement ( i = 1 , … , n {\displaystyle i=1,\ldots ,n\,\!} ), F ( x , y ∗ ) = 0 {\displaystyle F(x,y^{})=0\,\!} are the p {\displaystyle p\,\!} process equality constraints and x min , x max , y min , y max {\displaystyle x_{\min },x_{\max },y_{\min },y_{\max }\,\!} are the bounds on the measured and unmeasured variables. The term ( y i ∗ − y i σ i ) 2 {\displaystyle \left({\frac {y_{i}^{}-y_{i}}{\sigma _{i}}}\right)^{2}\,\!} is called the penalty of measurement i. The objective function is the sum of the penalties, which will be denoted in the following by f ( y ∗ ) = ∑ i = 1 n ( y i ∗ − y i σ i ) 2 {\displaystyle f(y^{})=\sum _{i=1}^{n}\left({\frac {y_{i}^{}-y_{i}}{\sigma _{i}}}\right)^{2}} . In other words, one wants to minimize the overall correction (measured in the least squares term) that is needed in order to satisfy the system constraints. Additionally, each least squares term is weighted by the standard deviation of the corresponding measurement. The standard deviation is related to the accuracy of the measurement. For example, at a 95% confidence level, the standard deviation is about half the accuracy. === Redundancy === Data reconciliation relies strongly on the concept of redundancy to correct the measurements as little as possible in order to satisfy the process constraints. Here, redundancy is defined differently from redundancy in information theory. Instead, redundancy arises from combining sensor data with the model (algebraic constraints), sometimes more specifically called "spatial redundancy", "analytical redundancy", or "topological redundancy". Redundancy can be due to sensor redundancy, where sensors are duplicated in order to have more than one measurement of the same quantity. Redundancy also arises when a single variable can be estimated in several independent ways from separate sets of measurements at a given time or time averaging period, using the algebraic constraints. Redundancy is linked to the concept
CHAOS (chess)
CHAOS (Chess Heuristics and Other Stuff) is a chess playing program that was developed by programmers working at the RCA Systems Programming division in the late 1960s. It played competitively in computer chess competitions in the 1970s and 1980s. It differed from other programs of that era in its look-ahead philosophy, choosing to use chess knowledge to evaluate fewer positions and continuations as opposed to simple evaluations that relied on deep look-ahead to avoid bad moves. == Introduction == CHAOS was originally developed by Ira Ruben, Fred Swartz, Victor Berman, Joe Winograd and William Toikka while working at RCA in Cinnaminson, NJ. Its name is an acronym for 'Chess Heuristics and Other Stuff.' Program development moved to the Computing Center of the University of Michigan when Swartz changed jobs, and Mike Alexander joined the development group. Swartz, Alexander and Berman were continuously group members from that point onward in CHAOS' evolution, as others of the original authors left and new members contributed episodically. Chess Senior Master Jack O'Keefe contributed to CHAOS' development from about 1980 onwards. CHAOS was written in Fortran, except for low-level board representation manipulations written in assembly language or C. Due to this portability, it ran on RCA, Univac and IBM-compatible mainframes in its lifetime. CHAOS heralds from the mainframe computing era when only machines of that capacity were able to play at a high level. Consequently, development and testing could only take place at off-peak times for production use of the machine. In a competition, CHAOS had to run on a dedicated mainframe with a telephone link to the match venue. In its later years, CHAOS ran on computers on the machine assembly floor of Amdahl Corporation on MTS. == Background == === Chess and artificial intelligence === Mathematicians Claude Shannon and Alan Turing, working separately, were the first to view playing chess as a challenge to machines. Working for AT&T / Bell Labs with its access to telephone switching equipment, Shannon built a relay-based machine that learned how to work its way through a two-dimensional, 5x5 cell maze in 1949. Shannon viewed this as an analogue of the way that organisms learn things about their natural environment. There is a random element to searching it, a memory element to benefit from the search outcome, and a reward element that reinforces learning when the global outcome is favorable to the organism. Soon afterward, Shannon wrote a mathematical analysis of the game of chess, published in 1950. Like with the maze, he broke down game play into the necessary elements for reinforcement learning. Associated with each board configuration a move will be made from, there is a numerical score. To decide what move to make, a player wants to maximize their own position's score after the move and to minimize their opponent's score (a minimax view). Since there are about 32 possible moves at each of the early stages of the game, and about 40 moves and responses in each game, then there are about 32 80 {\displaystyle 32^{80}} or about 10 120 {\displaystyle 10^{120}} possible games - an impossibly large set to evaluate completely. Therefore, there must be a way to limit the number of moves to look ahead for to find the best one. Reducing the game to these few key elements provided a way to think about human intelligence in general. Shannon became part of a wider group using computing machines to mimic aspects of human intelligence that grew into the general idea of artificial intelligence. (Other members of this group were John McCarthy, Herbert Simon, Allen Newell, Alan Kotok, Alex Bernstein and Richard Greenblatt.) The paradigm that evolved was that there was a quantification of the position on the board into a score, an evaluation method to find favorable outcomes (minimax, later alpha-beta pruning), and a strategy to manage the combinatorial explosion of the look-ahead possibilities. By the early 1960s, there were computer programs that played chess at a rudimentary level. They used very simple evaluation functions for each position and tried to search as far forward as was practical given the time constraints and available compute power. Naturally, programmers optimized their code to use the available computing resources. This led to a major philosophical divide among chess programs: those that tried to evaluate as many positions as possible, and those that tried to evaluate the most promising move sequences as deeply as possible. CHAOS was firmly in the camp believing only the most promising moves should be evaluated in depth. Said Swartz, "The 'brute force people' ... look at every (possible move) no matter what garbage it is. Most moves are just terrible, terrible moves, and most computing time is being spent on pure garbage." The program spent more time evaluating each board position in the expectation that it would find the most promising lines of play to explore in depth. In 1983, the then-fastest chess program (Belle) evaluated 110,000 positions per second, and typical programs 1000–50,000 per second, whereas CHAOS evaluated about 50-100 per second. === Machine learning and strategies to manage search === From about 1949 onward, Arthur Samuel began work for IBM on machine learning, culminating in a checkers-playing program in 1952 and publications on the topic. Concurrently, Christopher Strachey created Checkers, a program to play the board game of checkers in 1951, but it had no capacity to learn from its play. Checkers was chosen by both authors because it was simpler than chess yet contained the basic characteristics of an intellectual activity, and, in Samuel's view, was a test-bed in which heuristic procedures and learning processes could be evaluated quickly. Checker playing programs introduced the notion of the game tree and evaluating play to various depths to choose the best move. The complexity of chess, however, promoted it to the status of an analogue for human intelligence, and it attracted computer scientists' attention, who referred to it as research into artificial intelligence (AI). Like checkers, it required a numerical assessment of each arrangement of chess pieces on a board. It also required looking ahead to future moves to decide how to play the present position. Due to the enormous number of possible moves, there had to be a way to confine the look-ahead search to the most promising lines of play. From these factors, the notion of minimax score evaluation developed and, later, alpha-beta tree pruning to abandon looking at positions worse than any that have already been examined. === Chess search strategies === The AI community viewed artificial intelligence as comprising two parts: a way to symbolically quantify the knowledge in hand (a chess board position), and a set of heuristics to limit look-ahead to the consequences of a move. The early chess playing programs attempted to look forward as far as possible, perhaps to 3 moves ahead by each player, and to choose the best outcome. This led to the horizon effect, whereby a key move 4 or more moves ahead would be unexamined and therefore missed. Consequently, the programs were quite weak and heuristics to manage the search became important in their development. CHAOS used a selective search strategy with iterative widening. As chess programs evolved, they incorporated books of opening lines of play from historic sources. Nowadays, book moves are catalogued in machine-readable form, but originally programmers had to type them in. CHAOS had an extensive book for its time of around 10,000 moves that O'Keefe helped to develop. A problem with play from an opening book is the behavior of the program when the play leaves the book: the positional advantage may be so subtle that the evaluation scheme may be unable to understand it, leading to very wide and shallow searches to establish a line of play. The horizon effect again plagues move selection after leaving the book. CHAOS mitigated these problems by only using book lines that it could understand, and by relying on cached analyses of continuations out of the book made while the opponent's clock was running. == Game Play History == CHAOS played in twelve ACM computer chess tournaments and four World Computer Chess Championships (WCCC). Its debut was the ACM computer chess tournament in 1973, taking 2nd place. In 1974, it again won 2nd place in the WCCC, defeating the tournament favorite Chess 4.0 but losing to Kaissa. CHAOS was close to winning the 1980 WCCC, but lost to Belle in a playoff. The 1985 ACM computer chess tournament was CHAOS' last competition. One of CHAOS' notable victories was over Chess 4.0 at the 1974 WCCC tournament. Chess 4.0 was unbeaten by any other program up until then. Playing as white, CHAOS made a knight sacrifice (16 Nd4-e6!!) that traded material for open lines of attack and eventually won the game. CHAOS’ authors thought the move was due to a
List of cryptography journals
List of cryptography journals includes notable peer-reviewed academic journals that focus on cryptography, cryptanalysis, information security, and related areas in computer science and mathematics. == Notable journals == Cryptologia Designs, Codes and Cryptography IEEE Transactions on Information Theory International Journal of Information Security Journal of Cryptology Journal of Computer Security ACM Transactions on Privacy and Security Information Processing Letters Information and Computation