AI Detector Like Turnitin

AI Detector Like Turnitin — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Singularity studies

  Singularity studies is an interdisciplinary academic field which examines the idea of technological singularity — the hypothesised point at which artificial intelligence may surpass human intelligence, might be attained by artificial intelligence (AI), robotics, and other technologies and sciences, and its social impacts. In this academic field, the study and research are conducted across a broad array of terrains such as information science, robotics, social informatics, economics, philosophy, and ethics. The primary aim of singularity studies is to gain an integrative understanding of the transformation of social systems occurring in tandem with the explosive evolution of AI and also the changes to be effected by such transformation in the view of humans, ethics, and legal systems. == History == An academic work on technological singurality has appeared in computer science, philosophy, sociology, and law since the early 1990s. Early discussions of an intelligence explosion were popularised by science-fiction writer Vernor Vinge in 1993 and later systematised by futurist Ray Kurzweil. Since the 2010s, universities such as Oxford, Stanford, and Keio have established dedicated programmes, while peer-reviewed journals have begun to publish scenario analyses and policy studies. Ongoing debates question the predictive value of singularity scenarios and warn against a deterministic view of technology. == Characteristics of research == Singularity studies extends beyond mere future predictions and offer an intellectual foundation for proactively designing and creating a desirable future. Principal research themes in this realm include: Ethics of AI; Social implications of technologies; Possibility of harmonious coexistence of humans and AI; Communication with AI; and Redesign of social systems. == Technologists and academics == Vernor Vinge: Propounded the concept of singularity in 1993, making a massive impact on the academic and science-fiction spheres. Ray Kurzweil: Predicted the advent around 2045 of the technological singularity in his 2005 book The Singularity Is Near. Nick Bostrom: Offered philosophical reflections on superintelligence and the risks posed by AI. He is the founding director of the now-dissolved Future of Humanity Institute at the University of Oxford. === Japan === Kento Sasano: A social informatician, AI educator, and inventor. He is the president of the Japan Society of Singularity Studies. == Challenges and outlook == Singularity studies is still evolving as an academic field, and quite a few challenges remain unresolved in regard to the systematization of their theories, research methods, and educational curricula. That said, in this day and age of accelerating technological and societal shifts, interdisciplinary approaches have gained in importance and are drawing much attention in the arenas of scholarly research, intercorporate collaboration, and policy planning.

  Read more →
• 

  Ubiquitous computing

  Ubiquitous computing (or "ubicomp") is a concept in software engineering, hardware engineering and computer science where computing is made to appear seamlessly anytime and everywhere. In contrast to desktop computing, ubiquitous computing implies use on any device, in any location, and in any format. A user interacts with the computer, which can exist in many different forms, including laptop computers, tablets, smart phones and terminals in everyday objects such as a refrigerator or a pair of glasses. The underlying technologies to support ubiquitous computing include the Internet, advanced middleware, kernels, operating systems, mobile codes, sensors, microprocessors, new I/Os and user interfaces, computer networks, mobile protocols, global navigational systems, and new materials. This paradigm is also described as pervasive computing, ambient intelligence, or "everyware". Each term emphasizes slightly different aspects. When primarily concerning the objects involved, it is also known as physical computing, the Internet of Things, haptic computing, and "things that think". Rather than propose a single definition for ubiquitous computing and for these related terms, a taxonomy of properties for ubiquitous computing has been proposed, from which different kinds or flavors of ubiquitous systems and applications can be described. Ubiquitous computing themes include: distributed computing, mobile computing, location computing, mobile networking, sensor networks, human–computer interaction, context-aware smart home technologies, and artificial intelligence. == Core concepts == Ubiquitous computing is the concept of using small internet connected and inexpensive computers to help with everyday functions in an automated fashion. Mark Weiser proposed three basic forms for ubiquitous computing devices: Tabs: a wearable device that is approximately a centimeter in size Pads: a hand-held device that is approximately a decimeter in size Boards: an interactive larger display device that is approximately a meter in size Ubiquitous computing devices proposed by Mark Weiser are all based around flat devices of different sizes with a visual display. These conceptual device categories were later implemented at Xerox PARC in experimental systems including the PARCTab, PARCPad, and LiveBoard, which served as early prototypes of handheld, tablet-style, and large interactive display computing environments. Expanding beyond those concepts there is a large array of other ubiquitous computing devices that could exist. == History == Mark Weiser coined the phrase "ubiquitous computing" around 1988, during his tenure as Chief Technologist of the Xerox Palo Alto Research Center (PARC). Both alone and with PARC Director and Chief Scientist John Seely Brown, Weiser wrote some of the earliest papers on the subject, largely defining it and sketching out its major concerns. == Recognizing the effects of extending processing power == Recognizing that the extension of processing power into everyday scenarios would necessitate understandings of social, cultural and psychological phenomena beyond its proper ambit, Weiser was influenced by many fields outside computer science, including "philosophy, phenomenology, anthropology, psychology, post-Modernism, sociology of science and feminist criticism". He was explicit about "the humanistic origins of the 'invisible ideal in post-modernist thought'", referencing as well the ironically dystopian Philip K. Dick novel Ubik. Andy Hopper from Cambridge University UK proposed and demonstrated the concept of "Teleporting" – where applications follow the user wherever he/she moves. Roy Want (now at Google), while at Olivetti Research Ltd, designed the first "Active Badge System", which is an advanced location computing system where personal mobility is merged with computing. Later at Xerox PARC, he designed and built the "PARCTab" or simply "Tab", widely recognized as the world's first Context-Aware computer, which has great similarity to the modern smartphone. Bill Schilit (now at Google) also did some earlier work in this topic, and participated in the early Mobile Computing workshop held in Santa Cruz in 1996. Ken Sakamura of the University of Tokyo, Japan leads the Ubiquitous Networking Laboratory (UNL), Tokyo as well as the T-Engine Forum. The joint goal of Sakamura's Ubiquitous Networking specification and the T-Engine forum, is to enable any everyday device to broadcast and receive information. MIT has also contributed significant research in this field, notably Things That Think consortium (directed by Hiroshi Ishii, Joseph A. Paradiso and Rosalind Picard) at the Media Lab and the CSAIL effort known as Project Oxygen. Other major contributors include University of Washington (Shwetak Patel, Anind Dey and James Landay), Dartmouth College's HealthX Lab (directed by Andrew Campbell), Georgia Tech's College of Computing (Gregory Abowd and Thad Starner), Cornell Tech's People Aware Computing Lab (directed by Tanzeem Choudhury), NYU's Interactive Telecommunications Program, UC Irvine's Department of Informatics, Microsoft Research, Intel Research and Equator, Ajou University UCRi & CUS. == Examples == One of the earliest ubiquitous systems was artist Natalie Jeremijenko's "Live Wire", also known as "Dangling String", installed at Xerox PARC during Mark Weiser's time there. This was a piece of string attached to a stepper motor and controlled by a LAN connection; network activity caused the string to twitch, yielding a peripherally noticeable indication of traffic. Weiser called this an example of calm technology. A present manifestation of this trend is the widespread diffusion of mobile phones. Many mobile phones support high speed data transmission, video services, and other services with powerful computational ability. Although these mobile devices are not necessarily manifestations of ubiquitous computing, there are examples, such as Japan's Yaoyorozu ("Eight Million Gods") Project in which mobile devices, coupled with radio frequency identification tags demonstrate that ubiquitous computing is already present in some form. Ambient Devices has produced an "orb", a "dashboard", and a "weather beacon": these decorative devices receive data from a wireless network and report current events, such as stock prices and the weather, like the Nabaztag, which was invented by Rafi Haladjian and Olivier Mével, and manufactured by the company Violet. The Australian futurist Mark Pesce has produced a highly configurable 52-LED LAMP enabled lamp which uses Wi-Fi named MooresCloud after Gordon Moore. The Unified Computer Intelligence Corporation launched a device called Ubi – The Ubiquitous Computer designed to allow voice interaction with the home and provide constant access to information. Ubiquitous computing research has focused on building an environment in which computers allow humans to focus attention on select aspects of the environment and operate in supervisory and policy-making roles. Ubiquitous computing emphasizes the creation of a human computer interface that can interpret and support a user's intentions. For example, MIT's Project Oxygen seeks to create a system in which computation is as pervasive as air: In the future, computation will be human centered. It will be freely available everywhere, like batteries and power sockets, or oxygen in the air we breathe...We will not need to carry our own devices around with us. Instead, configurable generic devices, either handheld or embedded in the environment, will bring computation to us, whenever we need it and wherever we might be. As we interact with these "anonymous" devices, they will adopt our information personalities. They will respect our desires for privacy and security. We won't have to type, click, or learn new computer jargon. Instead, we'll communicate naturally, using speech and gestures that describe our intent... This is a fundamental transition that does not seek to escape the physical world and "enter some metallic, gigabyte-infested cyberspace" but rather brings computers and communications to us, making them "synonymous with the useful tasks they perform". Network robots link ubiquitous networks with robots, contributing to the creation of new lifestyles and solutions to address a variety of social problems including the aging of population and nursing care. The "Continuity" set of features, introduced by Apple in OS X Yosemite, can be seen as an example of ubiquitous computing. == Issues == Privacy is easily the most often-cited criticism of ubiquitous computing (ubicomp), and may be the greatest barrier to its long-term success. == Research centres == This is a list of notable institutions who claim to have a focus on Ubiquitous computing sorted by country: Canada Topological Media Lab, Concordia University, Canada Finland Community Imaging Group, University of Oulu, Finland Germany Telecooperation Office (TECO), Karlsruhe Institute of Technology, Ger

  Read more →
• 

  Authoritative Legal Entity Identifier

  An Authoritative Legal Entity Identifier (ALEI) is the identifier assigned by a government jurisdiction authorized by statute or decree to create a legal entity and to maintain the authoritative registries of legal entities. ALEIs are used within supply chain data, ERP applications and master data management systems to support accurate and consistent identification of entities in digital records, supply chains, and government databases. ALEIs are described in the international standard ISO 8000-116, which outlines a structured format that makes the locally unique identifier into a globally unique one and ensures global interoperability and data quality. == Structure == An ALEI is composed of three main components: a prefix that identifies the jurisdiction and register, a subdomain element (optional), and the local registration number of the entity. For example, the identifier "US-DE.BER:3031657" refers to an entity registered in the Delaware Business Entity Register in the United States. The standardization of this structure is governed by ISO 8000-116, which is designed to ensure each ALEI is globally unique and resolvable. == Comparison with other identifiers == ALEIs differ from proxy identifiers such as the DUNS number, NCAGE code, or the Legal Entity Identifier (LEI) managed by GLEIF. While proxy identifiers can be issued by institutions that do not create legal entities, ALEIs are created and maintained by public bodies with the authority to form and register legal entities. This authoritative origin makes ALEIs particularly suitable for applications involving legal traceability, government regulation, and international transparency efforts. == Usage == ALEIs are increasingly utilized to identify legal entities in public and private datasets. The identifiers support supply chain accuracy, regulatory compliance, and the unification of master data. The first practical implementation of an ALEI was the International Business Registration Number (IBRN), developed to provide globally unique identifiers for registered business entities. IBRNs are issued by authorized government jurisdictions and are used to verify entities across borders, particularly in the context of trade facilitation and data exchange systems. For instance, business directories and registration systems in U.S. states like Connecticut provide structured registration documents that can be used to verify the ALEIs they issue. The use of ALEIs has been recommended by international organizations such as the Extractive Industries Transparency Initiative (EITI) and Open ownership to improve beneficial ownership registries. == Policy and regulation == ALEIs have been referenced in policy consultations such as those related to the U.S. Financial Data Transparency Act. Federal institutions including the Federal Reserve and FDIC have examined the potential for ALEIs to unify entity identification across regulatory databases.

  Read more →
• 

  Metadirectory

  A metadirectory system provides for the flow of data between one or more directory services and databases in order to maintain synchronization of that data. It is an important part of identity management systems. The data being synchronized typically are collections of entries that contain user profiles and possibly authentication or policy information. Most metadirectory deployments synchronize data into at least one LDAP-based directory server, to ensure that LDAP-based applications such as single sign-on and portal servers have access to recent data, even if the data is mastered in a non-LDAP data source. Metadirectory products support filtering and transformation of data in transit. Most identity management suites from commercial vendors include a metadirectory product, or a user provisioning product.

  Read more →
• 

  Quantification (machine learning)

  In machine learning, quantification (variously called learning to quantify, or supervised prevalence estimation, or class prior estimation) is the task of using supervised learning in order to train models (quantifiers) that estimate the relative frequencies (also known as prevalence values) of the classes of interest in a sample of unlabelled data items. For instance, in a sample of 100,000 unlabelled tweets known to express opinions about a certain political candidate, a quantifier may be used to estimate the percentage of these tweets which belong to class `Positive' (i.e., which manifest a positive stance towards this candidate), and to do the same for classes `Neutral' and `Negative'. Quantification may also be viewed as the task of training predictors that estimate a (discrete) probability distribution, i.e., that generate a predicted distribution that approximates the unknown true distribution of the items across the classes of interest. Quantification is different from classification, since the goal of classification is to predict the class labels of individual data items, while the goal of quantification it to predict the class prevalence values of sets of data items. Quantification is also different from regression, since in regression the training data items have real-valued labels, while in quantification the training data items have class labels. It has been shown in multiple research works that performing quantification by classifying all unlabelled instances and then counting the instances that have been attributed to each class (the 'classify and count' method) usually leads to suboptimal quantification accuracy. This suboptimality may be seen as a direct consequence of 'Vapnik's principle', which states: If you possess a restricted amount of information for solving some problem, try to solve the problem directly and never solve a more general problem as an intermediate step. It is possible that the available information is sufficient for a direct solution but is insufficient for solving a more general intermediate problem. In our case, the problem to be solved directly is quantification, while the more general intermediate problem is classification. As a result of the suboptimality of the 'classify and count' method, quantification has evolved as a task in its own right, different (in goals, methods, techniques, and evaluation measures) from classification. == Quantification tasks == === Quantification tasks according to the set of classes === The main variants of quantification, according to the characteristics of the set of classes used, are: Binary quantification, corresponding to the case in which there are only n = 2 {\displaystyle n=2} classes and each data item belongs to exactly one of them; Single-label multiclass quantification, corresponding to the case in which there are n > 2 {\displaystyle n>2} classes and each data item belongs to exactly one of them; Multi-label multiclass quantification, corresponding to the case in which there are n ≥ 2 {\displaystyle n\geq 2} classes and each data item can belong to zero, one, or several classes at the same time; Ordinal quantification, corresponding to the single-label multiclass case in which a total order is defined on the set of classes. Regression quantification, a task which stands to 'standard' quantification as regression stands to classification. Strictly speaking, this task is not a quantification task as defined above (since the individual items do not have class labels but are labelled by real values), but has enough commonalities with other quantification tasks to be considered one of them. Most known quantification methods address the binary case or the single-label multiclass case, and only few of them address the multi-label, ordinal, and regression cases. Binary-only methods include the Mixture Model (MM) method, the HDy method, SVM(KLD), and SVM(Q). Methods that can deal with both the binary case and the single-label multiclass case include probabilistic classify and count (PCC), adjusted classify and count (ACC), probabilistic adjusted classify and count (PACC), the Saerens-Latinne-Decaestecker EM-based method (SLD), and KDEy. Methods for multi-label quantification include regression-based quantification (RQ) and label powerset-based quantification (LPQ). Methods for the ordinal case include ordinal versions of the above-mentioned ACC, PACC, and SLD methods, and ordinal versions of the above-mentioned HDy method. Methods for the regression case include Regress and splice and Adjusted regress and sum. === Quantification tasks according to the type of data === Several subtasks of quantification may be identified according to the type of data involved. Example such tasks are: Quantification of networked data. This task consists of performing quantification when the datapoints are members of a relation, i.e., are interlinked. As such, this task is a strict relative of collective classification. Quantification over time. This task consists of performing quantification on sets that become available in a temporal sequence, i.e., as a data stream, and finds application in contexts in which class prevalence values must be monitored over time. == Evaluation measures for quantification == Several evaluation measures can be used for evaluating the error of a quantification method. Since quantification consists of generating a predicted probability distribution that estimates a true probability distribution, these evaluation measures are ones that compare two probability distributions. Most evaluation measures for quantification belong to the class of divergences. Evaluation measures for binary quantification, single-label multiclass quantification, and multi-label quantification, are Absolute Error Squared Error Relative Absolute Error Kullback–Leibler divergence Pearson Divergence Evaluation measures for ordinal quantification are Normalized Match Distance (a particular case of the Earth Mover's Distance) Root Normalized Order-Aware Distance == Applications == Quantification is of special interest in fields such as the social sciences, epidemiology, market research, allocating resources, and ecological modelling, since these fields are inherently concerned with aggregate data. However, quantification is also useful as a building block for solving other downstream tasks, such as improving the accuracy of classifiers on out-of-distribution data, measuring classifier bias and ranker bias, and estimating the accuracy of classifiers on out-of-distribution data. == Resources == LQ 2021: the 1st International Workshop on Learning to Quantify LQ 2022: the 2nd International Workshop on Learning to Quantify LQ 2023: the 3rd International Workshop on Learning to Quantify LQ 2024: the 4th International Workshop on Learning to Quantify LQ 2025: the 5th International Workshop on Learning to Quantify LeQua 2022: the 1st Data Challenge on Learning to Quantify LeQua 2024: the 2nd Data Challenge on Learning to Quantify QuaPy: An open-source Python-based software library for quantification QuantificationLib: A Python library for quantification and prevalence estimation

  Read more →
• 

  PureXML

  pureXML is the native XML storage feature in the IBM Db2 data server. pureXML provides query languages, storage technologies, indexing technologies, and other features to support XML data. The word pure in pureXML was chosen to indicate that Db2 natively stores and natively processes XML data in its inherent hierarchical structure, as opposed to treating XML data as plain text or converting it into a relational format. == Technical information == Db2 includes two distinct storage mechanisms: one for efficiently managing traditional SQL data types, and another for managing XML data. The underlying storage mechanism is transparent to users and applications; they simply use SQL (including SQL with XML extensions or SQL/XML) or XQuery to work with the data. XML data is stored in columns of Db2 tables that have the XML data type. XML data is stored in a parsed format that reflects the hierarchical nature of the original XML data. As such, pureXML uses trees and nodes as its model for storing and processing XML data. If you instruct Db2 to validate XML data against an XML schema prior to storage, Db2 annotates all nodes in the XML hierarchy with information about the schema types; otherwise, it will annotate the nodes with default type information. Upon storage, Db2 preserves the internal structure of XML data, converting its tag names and other information into integer values. Doing so helps conserve disk space and also improves the performance of queries that use navigational expressions. However, users aren't aware of this internal representation. Finally, Db2 automatically splits XML nodes across multiple database pages, as needed. XML schemas specify which XML elements are valid, in what order these elements should appear in XML data, which XML data types are associated with each element, and so on. pureXML allows you to validate the cells in a column of XML data against no schema, one schema, or multiple schemas. pureXML also provides tools to support evolving XML schemas. IBM has enhanced its programming language interfaces to support access to its XML data. These enhancements span Java (JDBC), C (embedded SQL and call-level interface), COBOL (embedded SQL), PHP, and Microsoft's .NET Framework (through the DB2.NET provider). == History == pureXML was first included in the DB2 9 for Linux, Unix, and Microsoft Windows release, which was codenamed Viper, in June 2006. It was available on DB2 9 for z/OS in March 2007. In October 2007, IBM released DB2 9.5 with improved XML data transaction performance and improved storage savings. In June 2009, IBM released DB2 9.7 with XML supported for database-partitioned, range-partitioned, and multi-dimensionally clustered tables as well as compression of XML data and indices. == Competition == Db2 is a hybrid data server—it offers data management for traditional relational data, as well as providing native XML data management. Other vendors that offer data management for both relational data and native XML storage include Oracle with its 11g product and Microsoft with its SQL Server product. pureXML also competes with native XML databases like BaseX, eXist, MarkLogic or Sedna. == Books == IBM International Technical Support Organization (ITSO) has published the following books, which are available in print or as free e-books: DB2 9: pureXML Overview and Fast Start DB2 9 pureXML Guide The following books are also available for purchase: DB2 pureXML Cookbook: Master the Power of IBM Hybrid Data Server == Education and training == The following pureXML classroom and online courses are available from IBM Education: Query and Manage XML Data with DB2 9. IBM course CG130. Classroom. Duration: 4 days. Query XML Data with DB2 9. IBM course CG100. Classroom. Duration: 2 days (first 2 days of CG130). Managing XML Data in DB2 9. IBM course CG160. Classroom. Duration: 2 days (last 2 days of CG130). DB2 pureXML. IBM Course CT140. Self-paced study plus Live Virtual Classroom.

  Read more →
• 

  Energy informatics

  Energy informatics is a research field covering the use of information and communication technology to address energy utilization and management challenges. Methods used for "smart" implementations often combine IoT sensors with artificial intelligence and machine learning. Energy Informatics is founded on flow networks that are the major suppliers and consumers of energy. Their efficiency can be improved by collecting and analyzing information. == Application areas == The field among other consider application areas within: Smart Buildings by developing ICT-centred solutions for improving the energy-efficiency of buildings. Smart Cities by investigating the synergies between demand patterns and supply availability of energy flows in cities and communities to improve energy efficiency, increase integration of renewable sources, and provide resilience towards system faults caused by extreme situations, like hurricanes and flooding. Smart Industries including the development of ICT-centred solutions for improving the energy efficiency and predictability of energy intensive industrial processes, without compromising process and product quality. Smart Energy Networks by developing ICT-centred solutions for coordinating the supply and demand in environmentally sustainable energy networks.

  Read more →
• 

  Sieve of Pritchard

  In mathematics, the sieve of Pritchard is an algorithm for finding all prime numbers up to a specified bound. Like the ancient sieve of Eratosthenes, it has a simple conceptual basis in number theory. It is especially suited to quick hand computation for small bounds. Whereas the sieve of Eratosthenes marks off each non-prime for each of its prime factors, the sieve of Pritchard avoids considering almost all non-prime numbers by building progressively larger wheels, which represent the pattern of numbers not divisible by any of the primes processed thus far. It thereby achieves a better asymptotic complexity, and was the first sieve with a running time sublinear in the specified bound. Its asymptotic running-time has not been improved on, and it deletes fewer composites than any other known sieve. It was created in 1979 by Paul Pritchard. Since Pritchard has created a number of other sieve algorithms for finding prime numbers, the sieve of Pritchard is sometimes singled out by being called the wheel sieve (by Pritchard himself) or the dynamic wheel sieve. == Overview == A prime number is a natural number that has no natural number divisors other than the number 1 and itself. To find all the prime numbers less than or equal to a given integer N, a sieve algorithm examines a set of candidates in the range 2, 3, …, N, and eliminates those that are not prime, leaving the primes at the end. The sieve of Eratosthenes examines all of the range, first removing all multiples of the first prime 2, then of the next prime 3, and so on. The sieve of Pritchard instead examines a subset of the range consisting of numbers that occur on successive wheels, which represent the pattern of numbers left after each successive prime is processed by the sieve of Eratosthenes. For i > 0, the ith wheel Wi represents this pattern. It is the set of numbers between 1 and the product Pi = p1 · p2 ⋯ pi of the first i prime numbers that are not divisible by any of these prime numbers (and is said to have an associated length Pi). This is because adding Pi to a number does not change whether it is divisible by one of the first i prime numbers, since the remainder on division by any one of these primes is unchanged. So W1 = {1} with length P1 = 2 represents the pattern of odd numbers; W2 = {1,5} with length P2 = 6 represents the pattern of numbers not divisible by 2 or 3; etc. Wheels are so-called because Wi can be usefully visualized as a circle of circumference Pi with its members marked at their corresponding distances from an origin. Then rolling the wheel along the number line marks points corresponding to successive numbers not divisible by one of the first i prime numbers. The animation shows W2 being rolled up to 30. It is useful to define Wi → n for n > 0 to be the result of rolling Wi up to n. Then the animation generates W2 → 30 = {1,5,7,11,13,17,19,23,25,29}. Note that up to 52 − 1 = 24, this consists only of 1 and the primes between 5 and 25. The sieve of Pritchard is derived from the observation that this holds generally: for all i > 0, the values in Wi → (p2i+1 − 1) are 1 and the primes between pi+1 and p2i+1. It even holds for i = 0, where the wheel has length 1 and contains just 1 (representing all the natural numbers). So the sieve of Pritchard starts with the trivial wheel W0 and builds successive wheels until the square of the wheel's first member after 1 is at least N. Wheels grow very quickly, but only their values up to N are needed and generated. It remains to find a method for generating the next wheel. Note in the animation that W3 = {1,5,7,11,13,17,19,23,25,29} − {5 · 1 , 5 · 5} can be obtained by rolling W2 up to 30 and then removing 5 times each member of W2.This also holds generally: for all i ≥ 0, Wi+1 = (Wi → Pi+1) − {pi+1 · w | w ∈ Wi}. Rolling Wi past Pi just adds values to Wi, so the current wheel is first extended by getting each successive member starting with w = 1, adding Pi to it, and inserting the result in the set. Then the multiples of pi+1 are deleted. Care must be taken to avoid a number being deleted that itself needs to be multiplied by pi+1. The sieve of Pritchard as originally presented does so by first skipping past successive members until finding the maximum one needed, and then doing the deletions in reverse order by working back through the set. This is the method used in the first animation above. A simpler approach is just to gather the multiples of pi+1 in a list, and then delete them. Another approach is given by Gries and Misra. If the main loop terminates with a wheel whose length is less than N, it is extended up to N to generate the remaining primes. The algorithm, for finding all primes up to N, is therefore as follows: Start with a set W = {1} and length = 1 representing wheel 0, and prime p = 2. As long as p2 ≤ N, do the following: if length < N, then extend W by repeatedly getting successive members w of W starting with 1 and inserting length + w into W as long as it does not exceed p · length or N; increase length to the minimum of p · length and N. repeatedly delete p times each member of W by first finding the largest ≤ length and then working backwards. note the prime p, then set p to the next member of W after 1 (or 3 if p was 2). if length < N, then extend W to N by repeatedly getting successive members w of W starting with 1 and inserting length + w into W as long as it does not exceed N; On termination, the rest of the primes up to N are the members of W after 1. === Example === To find all the prime numbers less than or equal to 150, proceed as follows. Start with wheel 0 with length 1, representing all natural numbers 1, 2, 3...: 1 The first number after 1 for wheel 0 (when rolled) is 2; note it as a prime. Now form wheel 1 with length 2 × 1 = 2 by first extending wheel 0 up to 2 and then deleting 2 times each number in wheel 0, to get: 1 2 The first number after 1 for wheel 1 (when rolled) is 3; note it as a prime. Now form wheel 2 with length 3 × 2 = 6 by first extending wheel 1 up to 6 and then deleting 3 times each number in wheel 1, to get 1 2 3 5 The first number after 1 for wheel 2 is 5; note it as a prime. Now form wheel 3 with length 5 × 6 = 30 by first extending wheel 2 up to 30 and then deleting 5 times each number in wheel 2 (in reverse order), to get 1 2 3 5 7 11 13 17 19 23 25 29 The first number after 1 for wheel 3 is 7; note it as a prime. Now wheel 4 has length 7 × 30 = 210, so we only extend wheel 3 up to our limit 150. (No further extending will be done now that the limit has been reached.) We then delete 7 times each number in wheel 3 until we exceed our limit 150, to get the elements in wheel 4 up to 150: 1 2 3 5 7 11 13 17 19 23 25 29 31 37 41 43 47 49 53 59 61 67 71 73 77 79 83 89 91 97 101 103 107 109 113 119 121 127 131 133 137 139 143 149 The first number after 1 for this partial wheel 4 is 11; note it as a prime. Since we have finished with rolling, we delete 11 times each number in the partial wheel 4 until we exceed our limit 150, to get the elements in wheel 5 up to 150: 1 2 3 5 7 11 13 17 19 23 25 29 31 37 41 43 47 49 53 59 61 67 71 73 77 79 83 89 91 97 101 103 107 109 113 119 121 127 131 133 137 139 143 149 The first number after 1 for this partial wheel 5 is 13. Since 13 squared is at least our limit 150, we stop. The remaining numbers (other than 1) are the rest of the primes up to our limit 150. Just 8 composite numbers are removed, once each. The rest of the numbers considered (other than 1) are prime. In comparison, the natural version of Eratosthenes sieve (stopping at the same point) removes composite numbers 184 times. == Pseudocode == The sieve of Pritchard can be expressed in pseudocode, as follows: algorithm Sieve of Pritchard is input: an integer N >= 2. output: the set of prime numbers in {1,2,...,N}. let W and Pr be sets of integer values, and all other variables integer values. k, W, length, p, Pr := 1, {1}, 2, 3, {2}; {invariant: p = pk+1 and W = Wk ∩ {\displaystyle \cap } {1,2,...,N} and length = minimum of Pk,N and Pr = the primes up to pk} while p2 <= N do if (length < N) then Extend W,length to minimum of plength,N; Delete multiples of p from W; Insert p into Pr; k, p := k+1, next(W, 1) if (length < N) then Extend W,length to N; return Pr ∪ {\displaystyle \cup } W - {1}; where next(W, w) is the next value in the ordered set W after w. procedure Extend W,length to n is {in: W = Wk and length = Pk and n > length} {out: W = Wk → {\displaystyle \rightarrow } n and length = n} integer w, x; w, x := 1, length+1; while x <= n do Insert x into W; w := next(W,w); x := length + w; length := n; procedure Delete multiples of p from W,length is integer w; w := p; while pw <= length do w := next(W,w); while w > 1 do w := prev(W,w); Remove pw from W; where prev(W, w) is the previous value in the ordered set W before w. The algorithm can be initialized with W0 instead of W1 at the minor complication of making next(W, 1) a special case when k = 0. This a

  Read more →
• 

  Transportation Economic Development Impact System

  Transportation Economic Development Impact System (TREDIS) is an economic analysis system sold by consulting firm Economic Development Research Group that is used in planning major transportation investments in the US and Canada. The role of economic impact analysis and TREDIS in the transportation planning process is explained in guidebooks of the US Department of Transportation and the American Association of State Highway and Transportation Officials. TREDIS has been most commonly used for assessing the expected economic impacts of statewide highway programs, regional multi-modal plans and public transport investment. Its history and theoretical foundation are explained in peer reviewed journal articles. == How It Works == TREDIS has a series of modules that calculate different forms of impacts and benefits. One module is an accounting framework that calculates user benefits, including impacts on cargo transportation and commuting costs, based on transportation forecasting results. A second module calculates wider economic development benefits, including impacts on business productivity, economic development and multiplier effects from the input-output analysis. It applies an economic model to estimate impacts on jobs, income, gross regional product and business output, by sector of the economy. A third module applies cost-benefit analysis from alternative perspectives.

  Read more →
• 

  Run-to-completion scheduling

  Run-to-completion scheduling or nonpreemptive scheduling is a scheduling model in which each task runs until it either finishes, or explicitly yields control back to the scheduler. Run-to-completion systems typically have an event queue which is serviced either in strict order of admission by an event loop, or by an admission scheduler which is capable of scheduling events out of order, based on other constraints such as deadlines. Some preemptive multitasking scheduling systems behave as run-to-completion schedulers in regard to scheduling tasks at one particular process priority level, at the same time as those processes still preempt other lower priority tasks and are themselves preempted by higher priority tasks.

  Read more →
• 

  Grid-oriented storage

  Grid-oriented Storage (GOS) was a term used for data storage by a university project during the era when the term grid computing was popular. == Description == GOS was a successor of the term network-attached storage (NAS). GOS systems contained hard disks, often RAIDs (redundant arrays of independent disks), like traditional file servers. GOS was designed to deal with long-distance, cross-domain and single-image file operations, which is typical in Grid environments. GOS behaves like a file server via the file-based GOS-FS protocol to any entity on the grid. Similar to GridFTP, GOS-FS integrates a parallel stream engine and Grid Security Infrastructure (GSI). Conforming to the universal VFS (Virtual Filesystem Switch), GOS-FS can be pervasively used as an underlying platform to best utilize the increased transfer bandwidth and accelerate the NFS/CIFS-based applications. GOS can also run over SCSI, Fibre Channel or iSCSI, which does not affect the acceleration performance, offering both file level protocols and block level protocols for storage area network (SAN) from the same system. In a grid infrastructure, resources may be geographically distant from each other, produced by differing manufacturers, and have differing access control policies. This makes access to grid resources dynamic and conditional upon local constraints. Centralized management techniques for these resources are limited in their scalability both in terms of execution efficiency and fault tolerance. Provision of services across such platforms requires a distributed resource management mechanism and the peer-to-peer clustered GOS appliances allow a single storage image to continue to expand, even if a single GOS appliance reaches its capacity limitations. The cluster shares a common, aggregate presentation of the data stored on all participating GOS appliances. Each GOS appliance manages its own internal storage space. The major benefit of this aggregation is that clustered GOS storage can be accessed by users as a single mount point. GOS products fit the thin-server categorization. Compared with traditional “fat server”-based storage architectures, thin-server GOS appliances deliver numerous advantages, such as the alleviation of potential network/grid bottle-necks, CPU and OS optimized for I/O only, ease of installation, remote management and minimal maintenance, low cost and Plug and Play, etc. Examples of similar innovations include NAS, printers, fax machines, routers and switches. An Apache server has been installed in the GOS operating system, ensuring an HTTPS-based communication between the GOS server and an administrator via a Web browser. Remote management and monitoring makes it easy to set up, manage, and monitor GOS systems. == History == Frank Zhigang Wang and Na Helian proposed a funding proposal to the UK government titled “Grid-Oriented Storage (GOS): Next Generation Data Storage System Architecture for the Grid Computing Era” in 2003. The proposal was approved and granted one million pounds in 2004. The first prototype was constructed in 2005 at Centre for Grid Computing, Cambridge-Cranfield High Performance Computing Facility. The first conference presentation was at IEEE Symposium on Cluster Computing and Grid (CCGrid), 9–12 May 2005, Cardiff, UK. As one of the five best work-in-progress, it was included in the IEEE Distributed Systems Online. In 2006, the GOS architecture and its implementations was published in IEEE Transactions on Computers, titled “Grid-oriented Storage: A Single-Image, Cross-Domain, High-Bandwidth Architecture”. Starting in January 2007, demonstrations were presented at Princeton University, Cambridge University Computer Lab and others. By 2013, the Cranfield Centre still used future tense for the project. Peer-to-peer file sharings use similar techniques.

  Read more →
• 

  Leiden algorithm

  The Leiden algorithm is a community detection algorithm developed by Traag et al at Leiden University. It was developed as a modification of the Louvain method. Like the Louvain method, the Leiden algorithm attempts to optimize modularity in extracting communities from networks; however, it addresses key issues present in the Louvain method, namely poorly connected communities and the resolution limit of modularity. == Improvement over Louvain method == Broadly, the Leiden algorithm uses the same two primary phases as the Louvain algorithm: a local node moving step (though, the method by which nodes are considered in Leiden is more efficient) and a graph aggregation step. However, to address the issues with poorly-connected communities and the merging of smaller communities into larger communities (the resolution limit of modularity), the Leiden algorithm employs an intermediate refinement phase in which communities may be split to guarantee that all communities are well-connected. Consider, for example, the following graph: Three communities are present in this graph (each color represents a community). Additionally, the center "bridge" node (represented with an extra circle) is a member of the community represented by blue nodes. Now consider the result of a node-moving step which merges the communities denoted by red and green nodes into a single community (as the two communities are highly connected): Notably, the center "bridge" node is now a member of the larger red community after node moving occurs (due to the greedy nature of the local node moving algorithm). In the Louvain method, such a merging would be followed immediately by the graph aggregation phase. However, this causes a disconnection between two different sections of the community represented by blue nodes. In the Leiden algorithm, the graph is instead refined: The Leiden algorithm's refinement step ensures that the center "bridge" node is kept in the blue community to ensure that it remains intact and connected, despite the potential improvement in modularity from adding the center "bridge" node to the red community. == Graph components == Before defining the Leiden algorithm, it will be helpful to define some of the components of a graph. === Vertices and edges === A graph is composed of vertices (nodes) and edges. Each edge is connected to two vertices, and each vertex may be connected to zero or more edges. Edges are typically represented by straight lines, while nodes are represented by circles or points. In set notation, let V {\displaystyle V} be the set of vertices, and E {\displaystyle E} be the set of edges: V := { v 1 , v 2 , … , v n } E := { e i j , e i k , … , e k l } {\displaystyle {\begin{aligned}V&:=\{v_{1},v_{2},\dots ,v_{n}\}\\E&:=\{e_{ij},e_{ik},\dots ,e_{kl}\}\end{aligned}}} where e i j {\displaystyle e_{ij}} is the directed edge from vertex v i {\displaystyle v_{i}} to vertex v j {\displaystyle v_{j}} . We can also write this as an ordered pair: e i j := ( v i , v j ) {\displaystyle {\begin{aligned}e_{ij}&:=(v_{i},v_{j})\end{aligned}}} === Community === A community is a unique set of nodes: C i ⊆ V C i ⋂ C j = ∅ ∀ i ≠ j {\displaystyle {\begin{aligned}C_{i}&\subseteq V\\C_{i}&\bigcap C_{j}=\emptyset ~\forall ~i\neq j\end{aligned}}} and the union of all communities must be the total set of vertices: V = ⋃ i = 1 C i {\displaystyle {\begin{aligned}V&=\bigcup _{i=1}C_{i}\end{aligned}}} === Partition === A partition is the set of all communities: P = { C 1 , C 2 , … , C n } {\displaystyle {\begin{aligned}{\mathcal {P}}&=\{C_{1},C_{2},\dots ,C_{n}\}\end{aligned}}} == Partition quality == How communities are partitioned is an integral part on the Leiden algorithm. How partitions are decided can depend on how their quality is measured. Additionally, many of these metrics contain parameters of their own that can change the outcome of their communities. === Modularity === Modularity is a highly used quality metric for assessing how well a set of communities partition a graph. The equation for this metric is defined for an adjacency matrix, A, as: Q = 1 2 m ∑ i j ( A i j − k i k j 2 m ) δ ( c i , c j ) {\displaystyle Q={\frac {1}{2m}}\sum _{ij}(A_{ij}-{\frac {k_{i}k_{j}}{2m}})\delta (c_{i},c_{j})} where: A i j {\displaystyle A_{ij}} represents the edge weight between nodes i {\displaystyle i} and j {\displaystyle j} ; see Adjacency matrix; k i {\displaystyle k_{i}} and k j {\displaystyle k_{j}} are the sum of the weights of the edges attached to nodes i {\displaystyle i} and j {\displaystyle j} , respectively; m {\displaystyle m} is the sum of all of the edge weights in the graph; c i {\displaystyle c_{i}} and c j {\displaystyle c_{j}} are the communities to which the nodes i {\displaystyle i} and j {\displaystyle j} belong; and δ {\displaystyle \delta } is Kronecker delta function: δ ( c i , c j ) = { 1 if c i and c j are the same community 0 otherwise {\displaystyle {\begin{aligned}\delta (c_{i},c_{j})&={\begin{cases}1&{\text{if }}c_{i}{\text{ and }}c_{j}{\text{ are the same community}}\\0&{\text{otherwise}}\end{cases}}\end{aligned}}} === Reichardt Bornholdt Potts Model (RB) === One of the most well used metrics for the Leiden algorithm is the Reichardt Bornholdt Potts Model (RB). This model is used by default in most mainstream Leiden algorithm libraries under the name RBConfigurationVertexPartition. This model introduces a resolution parameter γ {\displaystyle \gamma } and is highly similar to the equation for modularity. This model is defined by the following quality function for an adjacency matrix, A, as: Q = ∑ i j ( A i j − γ k i k j 2 m ) δ ( c i , c j ) {\displaystyle Q=\sum _{ij}(A_{ij}-\gamma {\frac {k_{i}k_{j}}{2m}})\delta (c_{i},c_{j})} where: γ {\displaystyle \gamma } represents a linear resolution parameter === Constant Potts Model (CPM) === Another metric similar to RB is the Constant Potts Model (CPM). This metric also relies on a resolution parameter γ {\displaystyle \gamma } The quality function is defined as: H = − ∑ i j ( A i j w i j − γ ) δ ( c i , c j ) {\displaystyle H=-\sum _{ij}(A_{ij}w_{ij}-\gamma )\delta (c_{i},c_{j})} === Understanding Potts Model resolution parameters/Resolution limit === Typically Potts models such as RB or CPM include a resolution parameter in their calculation. Potts models are introduced as a response to the resolution limit problem that is present in modularity maximization based community detection. The resolution limit problem is that, for some graphs, maximizing modularity may cause substructures of a graph to merge and become a single community and thus smaller structures are lost. These resolution parameters allow modularity adjacent methods to be modified to suit the requirements of the user applying the Leiden algorithm to account for small substructures at a certain granularity. The figure on the right illustrates why resolution can be a helpful parameter when using modularity based quality metrics. In the first graph, modularity only captures the large scale structures of the graph; however, in the second example, a more granular quality metric could potentially detect all substructures in a graph. == Algorithm == The Leiden algorithm starts with a graph of disorganized nodes (a) and sorts it by partitioning them to maximize modularity (the difference in quality between the generated partition and a hypothetical randomized partition of communities). The method it uses is similar to the Louvain algorithm, except that after moving each node it also considers that node's neighbors that are not already in the community it was placed in. This process results in our first partition (b), also referred to as P {\displaystyle {\mathcal {P}}} . Then the algorithm refines this partition by first placing each node into its own individual community and then moving them from one community to another to maximize modularity. It does this iteratively until each node has been visited and moved, and each community has been refined - this creates partition (c), which is the initial partition of P refined {\displaystyle {\mathcal {P}}_{\text{refined}}} . Then an aggregate network (d) is created by turning each community into a node. P refined {\displaystyle {\mathcal {P}}_{\text{refined}}} is used as the basis for the aggregate network while P {\displaystyle {\mathcal {P}}} is used to create its initial partition. Because we use the original partition P {\displaystyle {\mathcal {P}}} in this step, we must retain it so that it can be used in future iterations. These steps together form the first iteration of the algorithm. In subsequent iterations, the nodes of the aggregate network (which each represent a community) are once again placed into their own individual communities and then sorted according to modularity to form a new P refined {\displaystyle {\mathcal {P}}_{\text{refined}}} , forming (e) in the above graphic. In the case depicted by the graph, the nodes were already sorted optimally, so no change too

  Read more →
• 

  Optical sorting

  Optical sorting (sometimes called digital sorting) is the automated process of sorting solid products using cameras and/or lasers. Depending on the types of sensors used and the software-driven intelligence of the image processing system, optical sorters can recognize an object's color, size, shape, structural properties and chemical composition. The sorter compares objects to user-defined accept/reject criteria to identify and remove defective products and foreign material (FM) from the production line, or to separate product of different grades or types of materials. Optical sorters are in widespread use in the food industry worldwide, with the highest adoption in processing harvested foods such as potatoes, fruits, vegetables and nuts where it achieves non-destructive, 100 percent inspection in-line at full production volumes. The technology is also used in pharmaceutical manufacturing and nutraceutical manufacturing, tobacco processing, waste recycling and other industries. Compared to manual sorting, which is subjective and inconsistent, optical sorting helps improve product quality, maximize throughput and increase yields while reducing labor costs. == History == Optical sorting is an idea that first came out of the desire to automate industrial sorting of agricultural goods like fruits and vegetables. Before automated optical sorting technology was conceived in the 1930s, companies like Unitec were producing wooden machinery to assist in the mechanical sorting of fruit processing. In 1931, a company known as “the Electric Sorting Company” was incorporated and began the creation of the world’s first color sorters, which were being installed and used in Michigan’s bean industry by 1932. In 1937, optical sorting technology had advanced to allow for systems based on a two-color principle of selection. The next few decades saw the installation of new and improved sorting mechanisms, like gravity feed systems and the implementation of optical sorting in more agricultural industries. In the late 1960s, optical sorting began to be implemented to new industries beyond agriculture, like the sorting of ferrous and non-ferrous metals. By the 1990s, optical sorting was being used heavily in the sorting of solid wastes. With the large technological revolution happening in the late 1990s and early 2000s, optical sorters were being made more efficient via the implementation of new optical sensors, like CCD, UV, and IR cameras. Today, optical sorting is used in a wide variety of industries and, as such, is implemented with a varying selection of mechanisms to assist in that specific sorter’s task. == The sorting system == In general, optical sorters feature four major components: the feed system, the optical system, image processing software, and the separation system. The objective of the feed system is to spread products into a uniform monolayer so products are presented to the optical system evenly, without clumps, at a constant velocity. The optical system includes lights and sensors housed above and/or below the flow of the objects being inspected. The image processing system compares objects to user-defined accept/reject thresholds to classify objects and actuate the separation system. The separation system — usually compressed air for small products and mechanical devices for larger products, like whole potatoes — pinpoints objects while in-air and deflects the objects to remove into a reject chute while the good product continues along its normal trajectory. The ideal sorter to use depends on the application. Therefore, the product's characteristics and the user's objectives determine the ideal sensors, software-driven capabilities and mechanical platform. == Sensors == Optical sorters require a combination of lights and sensors to illuminate and capture images of the objects so the images can be processed. The processed images will determine if the material should be accepted or rejected. There are camera sorters, laser sorters and sorters that feature a combination of the two on one platform. Lights, cameras, lasers and laser sensors can be designed to function within visible light wavelengths as well as the infrared (IR) and ultraviolet (UV) spectrums. The optimal wavelengths for each application maximize the contrast between the objects to be separated. Cameras and laser sensors can differ in spatial resolution, with higher resolutions enabling the sorter to detect and remove smaller defects. === Cameras === Monochromatic cameras detect shades of gray from black to white and can be effective when sorting products with high-contrast defects. Sophisticated color cameras with high color resolution are capable of detecting millions of colors to better distinguish more subtle color defects. Trichromatic color cameras (also called three-channel cameras) divide light into three bands, which can include red, green and/or blue within the visible spectrum as well as IR and UV. The interaction of different materials with parts of the electromagnetic spectrum make these contrasts more evident than how they appear to the naked human eye. Coupled with intelligent software, sorters that feature cameras are capable of recognizing each object's color, size and shape; as well as the color, size, shape and location of a defect on a product. Some intelligent sorters even allow the user to define a defective product based on the total defective surface area of any given object. === Lasers === While cameras capture product information based primarily on material reflectance, lasers and their sensors are able to distinguish a material's structural properties along with their color. This structural property inspection allows lasers to detect a wide range of organic and inorganic foreign material such as insects, glass, metal, sticks, rocks and plastic; even if they are the same color as the good product. Lasers can be designed to operate within specific wavelengths of light; whether on the visible spectrum or beyond. For example, lasers can detect chlorophyll by stimulating fluorescence using specific wavelengths; which is a process that is very effective for removing foreign material from green vegetables. === Camera/laser combinations === Sorters equipped with cameras and lasers on one platform are generally capable of identifying the widest variety of attributes. Cameras are often better at recognizing color, size and shape while laser sensors identify differences in structural properties to maximize foreign material detection and removal. === Hyperspectral Imaging === Driven by the need to solve previously impossible sorting challenges, a new generation of sorters that feature multispectral and hyperspectral imaging Optical Sorters. Like trichromatic cameras, multispectral and hyperspectral cameras collect data from the electromagnetic spectrum. Unlike trichromatic cameras, which divide light into three bands, hyperspectral systems can divide light into hundreds of narrow bands over a continuous range that covers a vast portion of the electromagnetic spectrum. This opens the door for more detailed analysis that leads to a more consistent product. Using IR alone might detect some defects, but combining it with a broader range of the spectrum makes it more effective. Compared to the three data points per pixel collected by trichromatic cameras, hyperspectral cameras can collect hundreds of data points per pixel, which are combined to create a unique spectral signature (also called a fingerprint) for each object. When complemented by capable software intelligence, a hyperspectral sorter processes those fingerprints to enable sorting on the chemical composition of the product. This is an emerging area of chemometrics. == Software-driven intelligence == Once the sensors capture the object's response to the energy source, image processing is used to manipulate the raw data. The image processing extracts and categorizes information about specific features. The user then defines accept/reject thresholds that are used to determine what is good and bad in the raw data flow. The art and science of image processing lies in developing algorithms that maximize the effectiveness of the sorter while presenting a simple user-interface to the operator. Object-based recognition is a classic example of software-driven intelligence. It allows the user to define a defective product based on where a defect lies on the product and/or the total defective surface area of an object. It offers more control in defining a wider range of defective products. When used to control the sorter's ejection system, it can improve the accuracy of ejecting defective products. This improves product quality and increases yields. New software-driven capabilities are constantly being developed to address the specific needs of various applications. As computing hardware becomes more powerful, new software-driven advancements become possible. Some of these advancements enhance the effectivene

  Read more →
• 

  Webometrics Ranking of Business Schools

  The Webometrics Ranking of Business Schools, also known as Ranking Web of Business Schools, is a ranking system for the world's business schools based on a composite indicator that takes into account both the volume of the Web content (number of web pages and files) and the visibility and impact of these web publications according to the number of external inlinks (site citations) they received. The ranking is published by the Cybermetrics Lab, a research group of the Spanish National Research Council (CSIC) located in Madrid. This ranking was discontinued in 2013 and is no longer updated. This discontinued ranking is, however, often cited (as of 2017-06-16) by Google as its main ranking reference. Examples are: "Spain business school ranking " = "Zurich business school ranking" etc. The Webometrics Ranking of World Universities is a similar ranking of universities.

  Read more →
• 

  Seismological Facility for the Advancement of Geoscience

  The U.S. National Science Foundation's Seismological Facility for the Advancement of Geoscience (NSF SAGE) is a distributed, multi-user national facility that provides support for state of-the-art seismic research. It is operated by EarthScope Consortium. Its previous operator was the Incorporated Research Institutions for Seismology (IRIS), until its merger with UNAVCO to become EarthScope Consortium. NSF SAGE is one of the two premier geophysical facilities in support of geoscience and geoscience education of the National Science Foundation. The other premiere geophysical facility is NSF GAGE, the Geodetic Facility for the Advancement of Geoscience. The services of the facility include support for the Global Seismographic Network (GSN), Data Services, and instrument support via the EarthScope Primary Instrument Center (EPIC), including magnetotelluric (MT) geophysical research. == Global Seismographic Network (GSN) == NSF SAGE manages 40 stations of the 152-station Global Seismographic Network (GSN) for basic global seismicity and Earth structure research. The GSN also enables earthquake hazard mission-related data operations such as: Earthquake location and characterization Tsunami warning Nuclear explosion monitoring == Data Services == SAGE Data Services (DS) is the largest facility for the archiving, curation, and distribution of seismological and other geophysical data in the world. == EarthScope Primary Instrument Center (EPIC) == The EPIC facility maintains the largest open access, shared-use pool of portable seismic sensors in the world. It is located on the campus of New Mexico Tech. == MT == NSF SAGE provides instruments for magnetotelluric (MT) or electromagnetic geophysical research for the recording of our planet's ambient electric and magnetic fields, which allow for the characterization of the conductivity of the area consisting of the shallow crust to upper mantle. This helps with analysis of results obtained from seismic imaging methodologies. The NSF SAGE facility is: Developing open source MT data formatting and processing software. Providing access to proprietary software products.

  Read more →