AI Detector Deepseek

AI Detector Deepseek — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  AI-complete

  In the field of artificial intelligence (AI), tasks that are hypothesized to require artificial general intelligence to solve are informally known as AI-complete or AI-hard. Calling a problem AI-complete reflects the belief that it cannot be solved by a simple specific algorithm. Prior to 2013, problems supposed to be AI-complete included computer vision, natural language understanding, and dealing with unexpected circumstances while solving any real-world problem. AI-complete tasks were notably considered useful for distinguishing humans from automated agents, as CAPTCHAs aim to do. == History == The term was coined by Fanya Montalvo by analogy with NP-complete and NP-hard in complexity theory, which formally describes the most famous class of difficult problems. Early uses of the term are in Erik Mueller's 1987 PhD dissertation and in Eric Raymond's 1991 Jargon File. Expert systems, that were popular in the 1980s, were able to solve very simple and/or restricted versions of AI-complete problems, but never in their full generality. When AI researchers attempted to "scale up" their systems to handle more complicated, real-world situations, the programs tended to become excessively brittle without commonsense knowledge or a rudimentary understanding of the situation: they would fail as unexpected circumstances outside of its original problem context would begin to appear. When human beings are dealing with new situations in the world, they are helped by their awareness of the general context: they know what the things around them are, why they are there, what they are likely to do and so on. They can recognize unusual situations and adjust accordingly. Expert systems lacked this adaptability and were brittle when facing new situations. DeepMind published a work in May 2022 in which they trained a single model to do several things at the same time. The model, named Gato, can "play Atari, caption images, chat, stack blocks with a real robot arm and much more, deciding based on its context whether to output text, joint torques, button presses, or other tokens." Similarly, some tasks once considered to be AI-complete, like machine translation, are among the capabilities of large language models. == AI-complete problems == AI-complete problems have been hypothesized to include: AI peer review (composite natural language understanding, automated reasoning, automated theorem proving, formalized logic expert system) Bongard problems Computer vision (and subproblems such as object recognition) Natural language understanding (and subproblems such as text mining, machine translation, and word-sense disambiguation) Autonomous driving Dealing with unexpected circumstances while solving any real world problem, whether navigation, planning, or even the kind of reasoning done by expert systems. == Formalization == Computational complexity theory deals with the relative computational difficulty of computable functions. By definition, it does not cover problems whose solution is unknown or has not been characterized formally. Since many AI problems have no formalization yet, conventional complexity theory does not enable a formal definition of AI-completeness. == Research == Roman Yampolskiy suggests that a problem C {\displaystyle C} is AI-Complete if it has two properties: It is in the set of AI problems (Human Oracle-solvable). Any AI problem can be converted into C {\displaystyle C} by some polynomial time algorithm. On the other hand, a problem H {\displaystyle H} is AI-Hard if and only if there is an AI-Complete problem C {\displaystyle C} that is polynomial time Turing-reducible to H {\displaystyle H} . This also gives as a consequence the existence of AI-Easy problems, that are solvable in polynomial time by a deterministic Turing machine with an oracle for some problem. Yampolskiy has also hypothesized that the Turing Test is a defining feature of AI-completeness. Groppe and Jain classify problems which require artificial general intelligence to reach human-level machine performance as AI-complete, while only restricted versions of AI-complete problems can be solved by the current AI systems. For Šekrst, getting a polynomial solution to AI-complete problems would not necessarily be equal to solving the issue of artificial general intelligence, while emphasizing the lack of computational complexity research being the limiting factor towards achieving artificial general intelligence. For Kwee-Bintoro and Velez, solving AI-complete problems would have strong repercussions on society.

  Read more →
• 

  Label noise

  Label noise refers to errors or inaccuracies in the class labels of data instances. This is a widespread issue in machine learning datasets, arising from human annotator mistakes, unclear labeling instructions, automated labeling methods, or adversarial attacks in supervised learning. Label noise can be roughly divided into random noise, where labels are flipped independently of input features, and systematic noise, where mislabeling is dependent on certain patterns or biases in the data. Label noise can be damaging to model performance, especially for complex models that may overfit to noisy labels rather than generalizable patterns. Many approaches have been proposed to deal with the effects of label noise, including robust loss functions, noise-tolerant algorithms, data cleaning methods, and semi-supervised learning approaches. To reduce the impact of wrong labels during training, techniques like label smoothing, sample reweighting and using trusted validation sets are used. The role of noise-robust training paradigms and curriculum learning strategies to improve resilience against mislabeled data is also explored in recent research.

  Read more →
• 

  Robotic process automation

  Robotic process automation (RPA) is a form of business process automation that is based on software robots (bots) or artificial intelligence (AI) agents. RPA should not be confused with artificial intelligence as it is based on automation technology following a predefined workflow. It is sometimes referred to as software robotics (not to be confused with robot software). In traditional workflow automation tools, a software developer produces a list of actions to automate a task and interface to the back end system using internal application programming interfaces (APIs) or dedicated scripting language. In contrast, RPA systems develop the action list by watching the user perform that task in the application's graphical user interface (GUI) and then perform the automation by repeating those tasks directly in the GUI. This can lower the barrier to the use of automation in products that might not otherwise feature APIs for this purpose. RPA tools have strong technical similarities to graphical user interface testing tools. These tools also automate interactions with the GUI, and often do so by repeating a set of demonstration actions performed by a user. RPA tools differ from such systems in that they allow data to be handled in and between multiple applications, for instance, receiving email containing an invoice, extracting the data, and then typing that into a bookkeeping system. == Historic evolution == As a form of automation, the concept has been around for a long time in the form of screen scraping, so long that to early PC users the reminder of it often blurs with the idea of malware infection. Yet compared to screen scraping, RPA is much more extensible, consisting of API integration into other enterprise applications, connectors into ITSM systems, terminal services and even some types of AI (e.g. machine learning) services such as image recognition. It is considered to be a significant technological evolution in the sense that new software platforms are emerging which are sufficiently mature, resilient, scalable and reliable to make this approach viable for use in large enterprises (who would otherwise be reluctant due to perceived risks to quality and reputation). == Use == The hosting of RPA services also aligns with the metaphor of a software robot, with each robotic instance having its own virtual workstation, much like a human worker. The robot uses keyboard and mouse controls to take actions and execute automations. Normally, all of these actions take place in a virtual environment and not on screen; the robot does not need a physical screen to operate, rather it interprets the screen display electronically. The scalability of modern solutions based on architectures such as these owes much to the advent of virtualization technology, without which the scalability of large deployments would be limited by the available capacity to manage physical hardware and by the associated costs. The implementation of RPA in business enterprises has shown dramatic cost savings when compared to traditional non-RPA solutions. === RPA actual use === Banking and finance process automation Mortgage and lending processes Customer care automation eCommerce merchandising operations Social media marketing Optical character recognition applications Data extraction process Fixed automation process Manual and repetitive tasks automation Voice recognition and digital dictation software linked to join up business processes for straight through processing without manual intervention Specialised remote infrastructure management software featuring automated investigation and resolution of problems, using robots for the first line IT support Chatbots used by internet retailers and service providers to service customer requests for information. Also used by companies to service employee requests for information from internal databases Presentation layer automation software, increasingly used by business process outsourcers to displace human labour Interactive voice response (IVR) systems incorporating intelligent interaction with callers == Impact on employment == According to Harvard Business Review, most operations groups adopting RPA have promised their employees that automation would not result in layoffs. Instead, workers have been redeployed to do more interesting work. One academic study highlighted that knowledge workers did not feel threatened by automation: they embraced it and viewed the robots as team-mates. The same study highlighted that, rather than resulting in a lower "headcount", the technology was deployed in such a way as to achieve more work and greater productivity with the same number of people. Conversely, however, some analysts proffer that RPA represents a threat to the business process outsourcing (BPO) industry. The thesis behind this notion is that RPA will enable enterprises to "repatriate" processes from offshore locations into local data centers, with the benefit of this new technology. The effect, if true, will be to create high-value jobs for skilled process designers in onshore locations (and within the associated supply chain of IT hardware, data center management, etc.) but to decrease the available opportunity to low-skilled workers offshore. On the other hand, this discussion appears to be healthy ground for debate as another academic study was at pains to counter the so-called "myth" that RPA will bring back many jobs from offshore. === Impact on society === Academic studies project that RPA, among other technological trends, is expected to drive a new wave of productivity and efficiency gains in the global labour market. Although not directly attributable to RPA alone, Oxford University conjectures that up to 35% of all jobs might be automated by 2035. There are geographic implications to the trend in robotic automation. In the example above where an offshored process is "repatriated" under the control of the client organization (or even displaced by a business process outsourcer) from an offshore location to a data centre, the impact will be a deficit in economic activity to the offshore location and an economic benefit to the originating economy. On this basis, developed economies – with skills and technological infrastructure to develop and support a robotic automation capability – can be expected to achieve a net benefit from the trend. In a TEDx talk hosted by University College London (UCL), entrepreneur David Moss explains that digital labour in the form of RPA is likely to revolutionize the cost model of the services industry by driving the price of products and services down, while simultaneously improving the quality of outcomes and creating increased opportunity for the personalization of services. In a separate TEDx in 2019 talk, Japanese business executive, and former CIO of Barclays bank, Koichi Hasegawa noted that digital robots can be a positive effect on society if we start using a robot with empathy to help every person. He provides a case study of the Japanese insurance companies – Sompo Japan and Aioi – both of whom introduced bots to speed up the process of insurance pay-outs in past massive disaster incidents. Meanwhile, Professor Willcocks, author of the LSE paper cited above, speaks of increased job satisfaction and intellectual stimulation, characterising the technology as having the ability to "take the robot out of the human", a reference to the notion that robots will take over the mundane and repetitive portions of people's daily workload, leaving them to be used in more interpersonal roles or to concentrate on the remaining, more meaningful, portions of their day. It was also found in a 2021 study observing the effects of robotization in Europe that, the gender pay gap increased at a rate of .18% for every 1% increase in robotization of a given industry. == Unassisted RPA == Unassisted RPA, or RPAAI, is the next generation of RPA related technologies. Technological advancements around artificial intelligence allow a process to be run on a computer without needing input from a user. == Hyperautomation == Hyperautomation is the application of advanced technologies like RPA, artificial intelligence, machine learning (ML) and process mining to augment workers and automate processes in ways that are significantly more impactful than traditional automation capabilities. Hyperautomation is the combination of technologies that allow faster application authorship (like low-code and no-code) with automation technologies that coordinate different worker types (i.e. human and artificial) for intelligent and strategic workflow optimization. Gartner's report notes that this trend was kicked off with robotic process automation (RPA). The report notes that, "RPA alone is not hyperautomation. Hyperautomation requires a combination of tools to help support replicating pieces of where the human is involved in a task." == Outsourcing == Back office clerical processes outsourced by large organisations

  Read more →
• 

  Artificial wisdom

  Artificial wisdom (AW) is an artificial intelligence (AI) system which is able to display the human traits of wisdom and morals while being able to contemplate its own “endpoint”. Artificial wisdom can be described as artificial intelligence reaching the top-level of decision-making when confronted with the most complex challenging situations. The term artificial wisdom is used when the "intelligence" is based on more than by chance collecting and interpreting data, but by design enriched with smart and conscience strategies that wise people would use. == Overview == The goal of artificial wisdom is to create artificial intelligence that can successfully replicate the “uniquely human trait[s]” of having wisdom and morals as closely as possible. Thus, artificial wisdom, must “incorporate [the] ethical and moral considerations” of the data it uses. There are also many significant ethical and legal implications of AW which are compounded by the rapid advances in AI and related technologies alongside the lack of the development of ethics, guidelines, and regulations without the oversight of any kind of overarching advisory board. Additionally, there are challenges in how to develop, test, and implement AW in real world scenarios. Existing tests do not test the internal thought process by which a computer system reaches its conclusion, only the result of said process. When examining computer-aided wisdom; the partnership of artificial intelligence and contemplative neuroscience, concerns regarding the future of artificial intelligence shift to a more optimistic viewpoint. This artificial wisdom forms the basis of Louis Molnar's monographic article on artificial philosophy, where he coined the term and proposes how artificial intelligence might view its place in the grand scheme of things. == Definitions == There are no universal or standardized definitions for human intelligence, artificial intelligence, human wisdom, or artificial wisdom. However, the DIKW pyramid, describes the continuum of relationship between data, information, knowledge, and wisdom, puts wisdom at the highest level in its hierarchy. Gottfredson defines intelligence as “the ability to reason, plan, solve problems, think abstractly, comprehend complex ideas, learn quickly, and learn from experience”. Definitions for wisdom typically include requiring: The ability for emotional regulation, Pro-social behaviors (e.g., empathy, compassion, and altruism), Self-reflection, “A balance between decisiveness and acceptance of uncertainty and diversity of perspectives, and social advising.” As previously defined, Artificial Wisdom would then be an AI system which is able to solve problems via “an understanding of…context, ethics and moral principles,” rather than simple pre-defined inputs or “learned patterns.” Some scientists have also considered the field of artificial consciousness. However, Jeste states that “…it is generally agreed that only humans can have consciousness, autonomy, will, and theory of mind.” An artificially wise system must also be able to contemplate its end goal and recognize its own ignorance. Additionally, to contemplate its end goal, a wise system must have a “correct conception of worthwhile goals (broadly speaking) or well-being (narrowly speaking)”. "Stephen Grimm further suggests that the following three types of knowledge are individually necessary for wisdom: first, "knowledge of what is good or important for well-being", second, "knowledge of one’s standing, relative to what is good or important for well-being", and third, "knowledge of a strategy for obtaining what is good or important for wellbeing."" == Problems == There are notable problems with attempting to create an artificially wise system. Consciousness, autonomy, and will are considered strictly human features. === Values === There are significant ethical and philosophical issues when attempting to create an intelligent or a wise system. Notably, whose moral values will be used to train the system to be wise. Differing moral values and prejudice can already be seen from various organizations and governments in artificial intelligence. Deployment strategies and values of Artificial Wisdom will conflict between leaders, companies, and countries. Nusbaum states, “When values are in conflict, leaders often make choices that are clever or smart about their own needs, but are often not wise.” === Ethics === Science fiction author Isaac Asimov realized the need to control the technology in the 1940s when he wrote the three laws of robotics as follows: A robot may not injure a human directly or indirectly. A robot must obey human’s orders. A robot should seek to protect its own existence. Additionally, the pace at which technology is rapidly advancing artificial intelligence and thus the need for artificial wisdom may “have outpaced the development of societal guidelines have raised serious questions about the ethics and morality of AI, and called for international oversight and regulations to ensure safety.” === Principal impossibility === One argument, coined by Tsai as the “argument against AW,” or AAAW, postulates the principal impossibility of Artificial Wisdom. The argument is based on the philosophical differences between practical wisdom, also called phronesis, and practical intelligence. Said difference isn’t in “selecting the correct means, but reasoning correctly about what ends to follow”. Tsai puts the argument into a logical proposition as follows: “(P1) An agent is genuinely wise only if the agent can deliberate about the final goal of the domain in which the agent is situated.” “(P2) An intelligent agent cannot deliberate about the final goal of the domain in which the agent is situated.” “(C1) An intelligent agent cannot be genuinely wise.” “(P3) An AW is, at its core, intelligent.” “(C2) An AW cannot be genuinely wise.”

  Read more →
• 

  Scene statistics

  Scene statistics is a discipline within the field of perception. It is concerned with the statistical regularities related to scenes. It is based on the premise that a perceptual system is designed to interpret scenes. Biological perceptual systems have evolved in response to physical properties of natural environments. Therefore natural scenes receive a great deal of attention. Natural scene statistics are useful for defining the behavior of an ideal observer in a natural task, typically by incorporating signal detection theory, information theory or estimation theory. == Within-domain versus across-domain == Geisler (2008) distinguishes between four kinds of domains: (1) Physical environments (2) Images/Scenes (3) Neural responses and (4) Behavior. Within the domain of images/scenes one can study the characteristics of information related to redundancy and efficient coding. Across-domain statistics determine how an autonomous system should make inferences about its environment, process information and control its behavior. To study these statistics it is necessary to sample or register information in multiple domains simultaneously. == Applications == === Prediction of picture and video quality === One of the most successful applications of Natural Scenes Statistics Models has been perceptual picture and video quality prediction. For example, the Visual Information Fidelity (VIF) algorithm, which is used to measure the degree of distortion of pictures and videos, is used extensively by the image and video processing communities to assess perceptual quality. This is often after processing, such as compression, which can degrade the appearance of a visual signal. The premise is that the scene statistics are changed by distortion and that the visual system is sensitive to the changes in the scene statistics. VIF is heavily used in the streaming television industry. Other popular picture quality models that use natural scene statistics include BRISQUE and NIQE, both of which are no-reference since they do not require any reference picture to measure quality against.

  Read more →
• 

  EM algorithm and GMM model

  In statistics, EM (expectation maximization) algorithm handles latent variables, while GMM is the Gaussian mixture model. == Background == In the picture below, are shown the red blood cell hemoglobin concentration and the red blood cell volume data of two groups of people, the Anemia group and the control group (i.e. the group of people without Anemia). As expected, people with Anemia have lower red blood cell volume and lower red blood cell hemoglobin concentration than those without Anemia. x {\displaystyle x} is a random vector such as x := ( red blood cell volume , red blood cell hemoglobin concentration ) {\displaystyle x:={\big (}{\text{red blood cell volume}},{\text{red blood cell hemoglobin concentration}}{\big )}} , and from medical studies it is known that x {\displaystyle x} are normally distributed in each group, i.e. x ∼ N ( μ , Σ ) {\displaystyle x\sim {\mathcal {N}}(\mu ,\Sigma )} . z {\displaystyle z} is denoted as the group where x {\displaystyle x} belongs, with z i = 0 {\displaystyle z_{i}=0} when x i {\displaystyle x_{i}} belongs to the Anemia group and z i = 1 {\displaystyle z_{i}=1} when x i {\displaystyle x_{i}} belongs to the control group. Also z ∼ Categorical ⁡ ( k , ϕ ) {\displaystyle z\sim \operatorname {Categorical} (k,\phi )} where k = 2 {\displaystyle k=2} , ϕ j ≥ 0 , {\displaystyle \phi _{j}\geq 0,} and ∑ j = 1 k ϕ j = 1 {\displaystyle \sum _{j=1}^{k}\phi _{j}=1} . See Categorical distribution. The following procedure can be used to estimate ϕ , μ , Σ {\displaystyle \phi ,\mu ,\Sigma } . A maximum likelihood estimation can be applied: ℓ ( ϕ , μ , Σ ) = ∑ i = 1 m log ⁡ ( p ( x ( i ) ; ϕ , μ , Σ ) ) = ∑ i = 1 m log ⁡ ∑ z ( i ) = 1 k p ( x ( i ) ∣ z ( i ) ; μ , Σ ) p ( z ( i ) ; ϕ ) {\displaystyle \ell (\phi ,\mu ,\Sigma )=\sum _{i=1}^{m}\log(p(x^{(i)};\phi ,\mu ,\Sigma ))=\sum _{i=1}^{m}\log \sum _{z^{(i)}=1}^{k}p\left(x^{(i)}\mid z^{(i)};\mu ,\Sigma \right)p(z^{(i)};\phi )} As the z i {\displaystyle z_{i}} for each x i {\displaystyle x_{i}} are known, the log likelihood function can be simplified as below: ℓ ( ϕ , μ , Σ ) = ∑ i = 1 m log ⁡ p ( x ( i ) ∣ z ( i ) ; μ , Σ ) + log ⁡ p ( z ( i ) ; ϕ ) {\displaystyle \ell (\phi ,\mu ,\Sigma )=\sum _{i=1}^{m}\log p\left(x^{(i)}\mid z^{(i)};\mu ,\Sigma \right)+\log p\left(z^{(i)};\phi \right)} Now the likelihood function can be maximized by making partial derivative over μ , Σ , ϕ {\displaystyle \mu ,\Sigma ,\phi } , obtaining: ϕ j = 1 m ∑ i = 1 m 1 { z ( i ) = j } {\displaystyle \phi _{j}={\frac {1}{m}}\sum _{i=1}^{m}1\{z^{(i)}=j\}} μ j = ∑ i = 1 m 1 { z ( i ) = j } x ( i ) ∑ i = 1 m 1 { z ( i ) = j } {\displaystyle \mu _{j}={\frac {\sum _{i=1}^{m}1\{z^{(i)}=j\}x^{(i)}}{\sum _{i=1}^{m}1\left\{z^{(i)}=j\right\}}}} Σ j = ∑ i = 1 m 1 { z ( i ) = j } ( x ( i ) − μ j ) ( x ( i ) − μ j ) T ∑ i = 1 m 1 { z ( i ) = j } {\displaystyle \Sigma _{j}={\frac {\sum _{i=1}^{m}1\{z^{(i)}=j\}(x^{(i)}-\mu _{j})(x^{(i)}-\mu _{j})^{T}}{\sum _{i=1}^{m}1\{z^{(i)}=j\}}}} If z i {\displaystyle z_{i}} is known, the estimation of the parameters results to be quite simple with maximum likelihood estimation. But if z i {\displaystyle z_{i}} is unknown it is much more complicated. Being z {\displaystyle z} a latent variable (i.e. not observed), with unlabeled scenario, the expectation maximization algorithm is needed to estimate z {\displaystyle z} as well as other parameters. Generally, this problem is set as a GMM since the data in each group is normally distributed. In machine learning, the latent variable z {\displaystyle z} is considered as a latent pattern lying under the data, which the observer is not able to see very directly. x i {\displaystyle x_{i}} is the known data, while ϕ , μ , Σ {\displaystyle \phi ,\mu ,\Sigma } are the parameter of the model. With the EM algorithm, some underlying pattern z {\displaystyle z} in the data x i {\displaystyle x_{i}} can be found, along with the estimation of the parameters. The wide application of this circumstance in machine learning is what makes EM algorithm so important. == EM algorithm in GMM == The EM algorithm consists of two steps: the E-step and the M-step. Firstly, the model parameters and the z ( i ) {\displaystyle z^{(i)}} can be randomly initialized. In the E-step, the algorithm tries to guess the value of z ( i ) {\displaystyle z^{(i)}} based on the parameters, while in the M-step, the algorithm updates the value of the model parameters based on the guess of z ( i ) {\displaystyle z^{(i)}} of the E-step. These two steps are repeated until convergence is reached. The algorithm in GMM is: Repeat until convergence: 1. (E-step) For each i , j {\displaystyle i,j} , set w j ( i ) := p ( z ( i ) = j | x ( i ) ; ϕ , μ , Σ ) {\displaystyle w_{j}^{(i)}:=p\left(z^{(i)}=j|x^{(i)};\phi ,\mu ,\Sigma \right)} 2. (M-step) Update the parameters ϕ j := 1 m ∑ i = 1 m w j ( i ) {\displaystyle \phi _{j}:={\frac {1}{m}}\sum _{i=1}^{m}w_{j}^{(i)}} μ j := ∑ i = 1 m w j ( i ) x ( i ) ∑ i = 1 m w j ( i ) {\displaystyle \mu _{j}:={\frac {\sum _{i=1}^{m}w_{j}^{(i)}x^{(i)}}{\sum _{i=1}^{m}w_{j}^{(i)}}}} Σ j := ∑ i = 1 m w j ( i ) ( x ( i ) − μ j ) ( x ( i ) − μ j ) T ∑ i = 1 m w j ( i ) {\displaystyle \Sigma _{j}:={\frac {\sum _{i=1}^{m}w_{j}^{(i)}\left(x^{(i)}-\mu _{j}\right)\left(x^{(i)}-\mu _{j}\right)^{T}}{\sum _{i=1}^{m}w_{j}^{(i)}}}} With Bayes' rule, the following result is obtained by the E-step: p ( z ( i ) = j | x ( i ) ; ϕ , μ , Σ ) = p ( x ( i ) | z ( i ) = j ; μ , Σ ) p ( z ( i ) = j ; ϕ ) ∑ l = 1 k p ( x ( i ) | z ( i ) = l ; μ , Σ ) p ( z ( i ) = l ; ϕ ) {\displaystyle p\left(z^{(i)}=j|x^{(i)};\phi ,\mu ,\Sigma \right)={\frac {p\left(x^{(i)}|z^{(i)}=j;\mu ,\Sigma \right)p\left(z^{(i)}=j;\phi \right)}{\sum _{l=1}^{k}p\left(x^{(i)}|z^{(i)}=l;\mu ,\Sigma \right)p\left(z^{(i)}=l;\phi \right)}}} According to GMM setting, these following formulas are obtained: p ( x ( i ) | z ( i ) = j ; μ , Σ ) = 1 ( 2 π ) n / 2 | Σ j | 1 / 2 exp ⁡ ( − 1 2 ( x ( i ) − μ j ) T Σ j − 1 ( x ( i ) − μ j ) ) {\displaystyle p\left(x^{(i)}|z^{(i)}=j;\mu ,\Sigma \right)={\frac {1}{(2\pi )^{n/2}\left|\Sigma _{j}\right|^{1/2}}}\exp \left(-{\frac {1}{2}}\left(x^{(i)}-\mu _{j}\right)^{T}\Sigma _{j}^{-1}\left(x^{(i)}-\mu _{j}\right)\right)} p ( z ( i ) = j ; ϕ ) = ϕ j {\displaystyle p\left(z^{(i)}=j;\phi \right)=\phi _{j}} In this way, a switch between the E-step and the M-step is possible, according to the randomly initialized parameters.

  Read more →
• 

  Hyperparameter (machine learning)

  In machine learning, a hyperparameter is a parameter that can be set in order to define any configurable part of a model's learning process. Hyperparameters can be classified as either model hyperparameters (such as the topology and size of a neural network) or algorithm hyperparameters (such as the learning rate and the batch size of an optimizer). These are named hyperparameters in contrast to parameters, which are characteristics that the model learns from the data. Hyperparameters are not required by every model or algorithm. Some simple algorithms such as ordinary least squares regression require none. However, the LASSO algorithm, for example, adds a regularization hyperparameter to ordinary least squares which must be set before training. Even models and algorithms without a strict requirement to define hyperparameters may not produce meaningful results if these are not carefully chosen. However, optimal values for hyperparameters are not always easy to predict. Some hyperparameters may have no meaningful effect, or one important variable may be conditional upon the value of another. Often a separate process of hyperparameter tuning is needed to find a suitable combination for the data and task. As well as improving model performance, hyperparameters can be used by researchers to introduce robustness and reproducibility into their work, especially if it uses models that incorporate random number generation. == Considerations == The time required to train and test a model can depend upon the choice of its hyperparameters. A hyperparameter is usually of continuous or integer type, leading to mixed-type optimization problems. The existence of some hyperparameters is conditional upon the value of others, e.g. the size of each hidden layer in a neural network can be conditional upon the number of layers. === Difficulty-learnable parameters === The objective function is typically non-differentiable with respect to hyperparameters. As a result, in most instances, hyperparameters cannot be learned using gradient-based optimization methods (such as gradient descent), which are commonly employed to learn model parameters. These hyperparameters are those parameters describing a model representation that cannot be learned by common optimization methods, but nonetheless affect the loss function. An example would be the tolerance hyperparameter for errors in support vector machines. === Untrainable parameters === Sometimes, hyperparameters cannot be learned from the training data because they aggressively increase the capacity of a model and can push the loss function to an undesired minimum (overfitting to the data), as opposed to correctly mapping the richness of the structure in the data. For example, if we treat the degree of a polynomial equation fitting a regression model as a trainable parameter, the degree would increase until the model perfectly fit the data, yielding low training error, but poor generalization performance. === Tunability === Most performance variation can be attributed to just a few hyperparameters. The tunability of an algorithm, hyperparameter, or interacting hyperparameters is a measure of how much performance can be gained by tuning it. For an LSTM, while the learning rate followed by the network size are its most crucial hyperparameters, batching and momentum have no significant effect on its performance. Although some research has advocated the use of mini-batch sizes in the thousands, other work has found the best performance with mini-batch sizes between 2 and 32. === Robustness === An inherent stochasticity in learning directly implies that the empirical hyperparameter performance is not necessarily its true performance. Methods that are not robust to simple changes in hyperparameters, random seeds, or even different implementations of the same algorithm cannot be integrated into mission critical control systems without significant simplification and robustification. Reinforcement learning algorithms, in particular, require measuring their performance over a large number of random seeds, and also measuring their sensitivity to choices of hyperparameters. Their evaluation with a small number of random seeds does not capture performance adequately due to high variance. Some reinforcement learning methods, e.g. DDPG (Deep Deterministic Policy Gradient), are more sensitive to hyperparameter choices than others. == Optimization == Hyperparameter optimization finds a tuple of hyperparameters that yields an optimal model which minimizes a predefined loss function on given test data. The objective function takes a tuple of hyperparameters and returns the associated loss. Typically these methods are not gradient based, and instead apply concepts from derivative-free optimization or black box optimization. == Reproducibility == Apart from tuning hyperparameters, machine learning involves storing and organizing the parameters and results, and making sure they are reproducible. In the absence of a robust infrastructure for this purpose, research code often evolves quickly and compromises essential aspects like bookkeeping and reproducibility. Online collaboration platforms for machine learning go further by allowing scientists to automatically share, organize and discuss experiments, data, and algorithms. Reproducibility can be particularly difficult for deep learning models. For example, research has shown that deep learning models depend very heavily even on the random seed selection of the random number generator.

  Read more →
• 

  Isotropic position

  In the fields of machine learning, the theory of computation, and random matrix theory, a probability distribution over vectors is said to be in isotropic position if its covariance matrix is proportional to the identity matrix. == Formal definitions == Let D {\textstyle D} be a distribution over vectors in the vector space R n {\textstyle \mathbb {R} ^{n}} . Then D {\textstyle D} is in isotropic position if, for vector v {\textstyle v} sampled from the distribution, E v v T = I d . {\displaystyle \mathbb {E} \,vv^{\mathsf {T}}=\mathrm {Id} .} A set of vectors is said to be in isotropic position if the uniform distribution over that set is in isotropic position. In particular, every orthonormal set of vectors is isotropic. As a related definition, a convex body K {\textstyle K} in R n {\textstyle \mathbb {R} ^{n}} is called isotropic if it has volume | K | = 1 {\textstyle |K|=1} , center of mass at the origin, and there is a constant α > 0 {\textstyle \alpha >0} such that ∫ K ⟨ x , y ⟩ 2 d x = α 2 | y | 2 , {\displaystyle \int _{K}\langle x,y\rangle ^{2}dx=\alpha ^{2}|y|^{2},} for all vectors y {\textstyle y} in R n {\textstyle \mathbb {R} ^{n}} ; here | ⋅ | {\textstyle |\cdot |} stands for the standard Euclidean norm.

  Read more →
• 

  Teknomo–Fernandez algorithm

  The Teknomo–Fernandez algorithm (TF algorithm), is an efficient algorithm for generating the background image of a given video sequence. By assuming that the background image is shown in the majority of the video, the algorithm is able to generate a good background image of a video in O ( R ) {\displaystyle O(R)} -time using only a small number of binary operations and Boolean bit operations, which require a small amount of memory and has built-in operators found in many programming languages such as C, C++, and Java. == History == People tracking from videos usually involves some form of background subtraction to segment foreground from background. Once foreground images are extracted, then desired algorithms (such as those for motion tracking, object tracking, and facial recognition) may be executed using these images. However, background subtraction requires that the background image is already available and unfortunately, this is not always the case. Traditionally, the background image is searched for manually or automatically from the video images when there are no objects. More recently, automatic background generation through object detection, medial filtering, medoid filtering, approximated median filtering, linear predictive filter, non-parametric model, Kalman filter, and adaptive smoothening have been suggested; however, most of these methods have high computational complexity and are resource-intensive. The Teknomo–Fernandez algorithm is also an automatic background generation algorithm. Its advantage, however, is its computational speed of only O ( R ) {\displaystyle O(R)} -time, depending on the resolution R {\displaystyle R} of an image and its accuracy gained within a manageable number of frames. Only at least three frames from a video is needed to produce the background image assuming that for every pixel position, the background occurs in the majority of the videos. Furthermore, it can be performed for both grayscale and colored videos. == Assumptions == The camera is stationary. The light of the environment changes only slowly relative to the motions of the people in the scene. The number of people does not occupy the scene for most of the time at the same place. Generally, however, the algorithm will certainly work whenever the following single important assumption holds: For each pixel position, the majority of the pixel values in the entire video contain the pixel value of the actual background image (at that position).As long as each part of the background is shown in the majority of the video, the entire background image needs not to appear in any of its frames. The algorithm is expected to work accurately. == Background image generation == === Equations === For three frames of image sequence x 1 {\displaystyle x_{1}} , x 2 {\displaystyle x_{2}} , and x 3 {\displaystyle x_{3}} , the background image B {\displaystyle B} is obtained using B = x 3 ( x 1 ⊕ x 2 ) + x 1 x 2 {\displaystyle B=x_{3}(x_{1}\oplus x_{2})+x_{1}x_{2}} where ⊕ {\displaystyle \oplus } denotes the exclusive disjunctive bit operator. The Boolean mode function S {\displaystyle S} of the table occurs when the number of 1 entries is larger than half of the number of images such that S = { 1 , if ∑ i = 1 n x i ≥ ⌈ n 2 + 1 ⌉ , and n ≥ 3 0 , otherwise {\displaystyle S={\begin{cases}1,&{\text{if }}\sum _{i=1}^{n}x_{i}\geq \left\lceil {\frac {n}{2}}+1\right\rceil ,{\text{ and }}n\geq 3\\0,&{\text{otherwise}}\end{cases}}} For three images, the background image B {\displaystyle B} can be taken as the value x ¯ 1 x 2 x 3 + x 1 x ¯ 2 x 3 + x 1 x 2 x ¯ 3 + x 1 x 2 x 3 {\displaystyle {\bar {x}}_{1}x_{2}x_{3}+x_{1}{\bar {x}}_{2}x_{3}+x_{1}x_{2}{\bar {x}}_{3}+x_{1}x_{2}x_{3}} === Background generation algorithm === At the first level, three frames are selected at random from the image sequence to produce a background image by combining them using the first equation. This yields a better background image at the second level. The procedure is repeated until desired level L {\displaystyle L} . == Theoretical accuracy == At level ℓ {\displaystyle \ell } , the probability p ℓ {\displaystyle p_{\ell }} that the modal bit predicted is the actual modal bit is represented by the equation p ℓ = ( p ℓ − 1 ) 3 + 3 ( p ℓ − 1 ) 2 ( 1 − p ℓ − 1 ) {\displaystyle p_{\ell }=(p_{\ell -1})^{3}+3(p_{\ell -1})^{2}(1-p_{\ell -1})} . The table below gives the computed probability values across several levels using some specific initial probabilities. It can be observed that even if the modal bit at the considered position is at a low 60% of the frames, the probability of accurate modal bit determination is already more than 99% at 6 levels. == Space complexity == The space requirement of the Teknomo–Fernandez algorithm is given by the function O ( R F + R 3 L ) {\displaystyle O(RF+R3^{L})} , depending on the resolution R {\displaystyle R} of the image, the number F {\displaystyle F} of frames in the video, and the desired number L {\displaystyle L} of levels. However, the fact that L {\displaystyle L} will probably not exceed 6 reduces the space complexity to O ( R F ) {\displaystyle O(RF)} . == Time complexity == The entire algorithm runs in O ( R ) {\displaystyle O(R)} -time, only depending on the resolution of the image. Computing the modal bit for each bit can be done in O ( 1 ) {\displaystyle O(1)} -time while the computation of the resulting image from the three given images can be done in O ( R ) {\displaystyle O(R)} -time. The number of the images to be processed in L {\displaystyle L} levels is O ( 3 L ) {\displaystyle O(3^{L})} . However, since L ≤ 6 {\displaystyle L\leq 6} , then this is actually O ( 1 ) {\displaystyle O(1)} , thus the algorithm runs in O ( R ) {\displaystyle O(R)} . == Variants == A variant of the Teknomo–Fernandez algorithm that incorporates the Monte-Carlo method named CRF has been developed. Two different configurations of CRF were implemented: CRF9,2 and CRF81,1. Experiments on some colored video sequences showed that the CRF configurations outperform the TF algorithm in terms of accuracy. However, the TF algorithm remains more efficient in terms of processing time. == Applications == Object detection Face detection Face recognition Pedestrian detection Video surveillance Motion capture Human-computer interaction Content-based video coding Traffic monitoring Real-time gesture recognition

  Read more →
• 

  Surrogate model

  A surrogate model is an engineering method used when an outcome of interest cannot be easily measured or computed, so an approximate mathematical model of the outcome is used instead. Most engineering design problems require experiments and/or simulations to evaluate design objective and constraint functions as a function of design variables. For example, in order to find the optimal airfoil shape for an aircraft wing, an engineer simulates the airflow around the wing for different shape variables (e.g., length, curvature, material, etc.). For many real-world problems, however, a single simulation can take many minutes, hours, or even days to complete. As a result, routine tasks such as design optimization, design space exploration, sensitivity analysis and "what-if" analysis become impossible since they require thousands or even millions of simulation evaluations. One way of alleviating this burden is by constructing approximation models, known as surrogate models, metamodels or emulators, that mimic the behavior of the simulation model as closely as possible while being computationally cheaper to evaluate. Surrogate models are constructed using a data-driven, bottom-up approach. The exact, inner working of the simulation code is not assumed to be known (or even understood), relying solely on the input-output behavior. A model is constructed based on modeling the response of the simulator to a limited number of intelligently chosen data points. This approach is also known as behavioral modeling or black-box modeling, though the terminology is not always consistent. When only a single design variable is involved, the process is known as curve fitting. Though using surrogate models in lieu of experiments and simulations in engineering design is more common, surrogate modeling may be used in many other areas of science where there are expensive experiments and/or function evaluations. == Goals == The scientific challenge of surrogate modeling is the generation of a surrogate that is as accurate as possible, using as few simulation evaluations as possible. The process comprises three major steps which may be interleaved iteratively: Sample selection (also known as sequential design, optimal experimental design (OED) or active learning) Construction of the surrogate model and optimizing the model parameters (i.e., bias-variance tradeoff) Appraisal of the accuracy of the surrogate. The accuracy of the surrogate depends on the number and location of samples (expensive experiments or simulations) in the design space. A systematic data representation during training can improve model scalability, thereby reducing the need for expensive simulations. Various design of experiments (DOE) techniques cater to different sources of errors, in particular, errors due to noise in the data or errors due to an improper surrogate model. == Types of surrogate models == Popular surrogate modeling approaches are: polynomial response surfaces; kriging; more generalized Bayesian approaches; gradient-enhanced kriging (GEK); radial basis function; support vector machines; space mapping; artificial neural networks and Bayesian networks. Other methods recently explored include Fourier surrogate modeling , random forests, convolutional neural networks, and generative adversarial networks. For some problems, the nature of the true function is not known a priori, and therefore it is not clear which surrogate model will be the most accurate one. In addition, there is no consensus on how to obtain the most reliable estimates of the accuracy of a given surrogate. Many other problems have known physics properties. In these cases, physics-based surrogates such as space-mapping based models are commonly used. == Invariance properties == Recently proposed comparison-based surrogate models (e.g., ranking support vector machines) for evolutionary algorithms, such as CMA-ES, allow preservation of some invariance properties of surrogate-assisted optimizers: Invariance with respect to monotonic transformations of the function (scaling) Invariance with respect to orthogonal transformations of the search space (rotation) == Applications == An important distinction can be made between two different applications of surrogate models: design optimization and design space approximation (also known as emulation). In surrogate model-based optimization, an initial surrogate is constructed using some of the available budgets of expensive experiments and/or simulations. The remaining experiments/simulations are run for designs which the surrogate model predicts may have promising performance. The process usually takes the form of the following search/update procedure. Initial sample selection (the experiments and/or simulations to be run) Construct surrogate model Search surrogate model (the model can be searched extensively, e.g., using a genetic algorithm, as it is cheap to evaluate) Run and update experiment/simulation at new location(s) found by search and add to sample Iterate steps 2 to 4 until out of time or design is "good enough" Depending on the type of surrogate used and the complexity of the problem, the process may converge on a local or global optimum, or perhaps none at all. In design space approximation, one is not interested in finding the optimal parameter vector, but rather in the global behavior of the system. Here the surrogate is tuned to mimic the underlying model as closely as needed over the complete design space. Such surrogates are a useful, cheap way to gain insight into the global behavior of the system. Optimization can still occur as a post-processing step, although with no update procedure (see above), the optimum found cannot be validated. == Surrogate modeling software == Surrogate Modeling Toolbox (SMT: https://github.com/SMTorg/smt) is a Python package that contains a collection of surrogate modeling methods, sampling techniques, and benchmarking functions. This package provides a library of surrogate models that is simple to use and facilitates the implementation of additional methods. SMT is different from existing surrogate modeling libraries because of its emphasis on derivatives, including training derivatives used for gradient-enhanced modeling, prediction derivatives, and derivatives with respect to the training data. It also includes new surrogate models that are not available elsewhere: kriging by partial-least squares reduction and energy-minimizing spline interpolation. Python library SAMBO Optimization supports sequential optimization with arbitrary models, with tree-based models and Gaussian process models built in. Surrogates.jl is a Julia packages which offers tools like random forests, radial basis methods and kriging. == Surrogate-Assisted Evolutionary Algorithms (SAEAs) == SAEAs are an advanced class of optimization techniques that integrate evolutionary algorithms (EAs) with surrogate models. In traditional EAs, evaluating the fitness of candidate solutions often requires computationally expensive simulations or experiments. SAEAs address this challenge by building a surrogate model, which is a computationally inexpensive approximation of the objective function or constraint functions. The surrogate model serves as a substitute for the actual evaluation process during the evolutionary search. It allows the algorithm to quickly estimate the fitness of new candidate solutions, thereby reducing the number of expensive evaluations needed. This significantly speeds up the optimization process, especially in cases where the objective function evaluations are time-consuming or resource-intensive. SAEAs typically involve three main steps: (1) building the surrogate model using a set of initial sampled data points, (2) performing the evolutionary search using the surrogate model to guide the selection, crossover, and mutation operations, and (3) periodically updating the surrogate model with new data points generated during the evolutionary process to improve its accuracy. By balancing exploration (searching new areas in the solution space) and exploitation (refining known promising areas), SAEAs can efficiently find high-quality solutions to complex optimization problems. They have been successfully applied in various fields, including engineering design, machine learning, and computational finance, where traditional optimization methods may struggle due to the high computational cost of fitness evaluations.

  Read more →
• 

  Embodied cognitive science

  Embodied cognitive science is an interdisciplinary field of research, the aim of which is to explain the mechanisms underlying intelligent behavior. It comprises three main methodologies: the modeling of psychological and biological systems in a holistic manner that considers the mind and body as a single entity; the formation of a common set of general principles of intelligent behavior; and the experimental use of robotic agents in controlled environments. == Contributors == Embodied cognitive science borrows heavily from embodied philosophy and the related research fields of cognitive science, psychology, neuroscience and artificial intelligence. Contributors to the field include: From the perspective of neuroscience, Gerald Edelman of the Neurosciences Institute at La Jolla, Francisco Varela of CNRS in France, and J. A. Scott Kelso of Florida Atlantic University From the perspective of psychology, Lawrence Barsalou, Michael Turvey, Vittorio Guidano and Eleanor Rosch From the perspective of linguistics, Gilles Fauconnier, George Lakoff, Mark Johnson, Leonard Talmy and Mark Turner From the perspective of language acquisition, Eric Lenneberg and Philip Rubin at Haskins Laboratories From the perspective of anthropology, Edwin Hutchins, Bradd Shore, James Wertsch and Merlin Donald. From the perspective of autonomous agent design, early work is sometimes attributed to Rodney Brooks or Valentino Braitenberg From the perspective of artificial intelligence, Understanding Intelligence by Rolf Pfeifer and Christian Scheier or How the Body Shapes the Way We Think, by Rolf Pfeifer and Josh C. Bongard From the perspective of philosophy, Andy Clark, Dan Zahavi, Shaun Gallagher, and Evan Thompson In 1950, Alan Turing proposed that a machine may need a human-like body to think and speak: It can also be maintained that it is best to provide the machine with the best sense organs that money can buy, and then teach it to understand and speak English. That process could follow the normal teaching of a child. Things would be pointed out and named, etc. Again, I do not know what the right answer is, but I think both approaches should be tried. == Traditional cognitive theory == Embodied cognitive science is an alternative theory to cognition in which it minimizes appeals to computational theory of mind in favor of greater emphasis on how an organism's body determines how and what it thinks. Traditional cognitive theory is based mainly around symbol manipulation, in which certain inputs are fed into a processing unit that produces an output. These inputs follow certain rules of syntax, from which the processing unit finds semantic meaning. Thus, an appropriate output is produced. For example, a human's sensory organs are its input devices, and the stimuli obtained from the external environment are fed into the nervous system which serves as the processing unit. From here, the nervous system is able to read the sensory information because it follows a syntactic structure, thus an output is created. This output then creates bodily motions and brings forth behavior and cognition. Of particular note is that cognition is sealed away in the brain, meaning that mental cognition is cut off from the external world and is only possible by the input of sensory information. == The embodied cognitive approach == Embodied cognitive science differs from the traditionalist approach in that it denies the input-output system. This is chiefly due to the problems presented by the Homunculus argument, which concluded that semantic meaning could not be derived from symbols without some kind of inner interpretation. If some little man in a person's head interpreted incoming symbols, then who would interpret the little man's inputs? Because of the specter of an infinite regress, the traditionalist model began to seem less plausible. Thus, embodied cognitive science aims to avoid this problem by defining cognition in three ways. === Physical attributes of the body === The first aspect of embodied cognition examines the role of the physical body, particularly how its properties affect its ability to think. This part attempts to overcome the symbol manipulation component that is a feature of the traditionalist model. Depth perception, for instance, can be better explained under the embodied approach due to the sheer complexity of the action. Depth perception requires that the brain detect the disparate retinal images obtained by the distance of the two eyes. In addition, body and head cues complicate this further. When the head is turned in a given direction, objects in the foreground will appear to move against objects in the background. From this, it is said that some kind of visual processing is occurring without the need of any kind of symbol manipulation. This is because the objects appearing to move the foreground are simply appearing to move. This observation concludes then that depth can be perceived with no intermediate symbol manipulation necessary. A more poignant example exists through examining auditory perception. Generally speaking the greater the distance between the ears, the greater the possible auditory acuity. Also relevant is the amount of density in between the ears, for the strength of the frequency wave alters as it passes through a given medium. The brain's auditory system takes these factors into account as it process information, but again without any need for a symbolic manipulation system. This is because the distance between the ears for example does not need symbols to represent it. The distance itself creates the necessary opportunity for greater auditory acuity. The amount of density between the ears is similar, in that it is the actual amount itself that simply forms the opportunity for frequency alteration. Thus under consideration of the physical properties of the body, a symbolic system is unnecessary and an unhelpful metaphor. === The body's role in the cognitive process === The second aspect draws heavily from George Lakoff's and Mark Johnson's work on concepts. They argued that humans use metaphors whenever possible to better explain their external world. Humans also have a basic stock of concepts in which other concepts can be derived from. These basic concepts include spatial orientations such as up, down, front, and back. Humans can understand what these concepts mean because they can directly experience them from their own bodies. For example, because human movement revolves around standing erect and moving the body in an up-down motion, humans innately have these concepts of up and down. Lakoff and Johnson contend this is similar with other spatial orientations such as front and back too. As mentioned earlier, these basic stocks of spatial concepts are the basis in which other concepts are constructed. Happy and sad for instance are seen now as being up or down respectively. When someone says they are feeling down, what they are really saying is that they feel sad for example. Thus the point here is that true understanding of these concepts is contingent on whether one can have an understanding of the human body. So the argument goes that if one lacked a human body, they could not possibly know what up or down could mean, or how it could relate to emotional states. [I]magine a spherical being living outside of any gravitational field, with no knowledge or imagination of any other kind of experience. What could UP possibly mean to such a being? While this does not mean that such beings would be incapable of expressing emotions in other words, it does mean that they would express emotions differently from humans. Human concepts of happiness and sadness would be different because human would have different bodies. So then an organism's body directly affects how it can think, because it uses metaphors related to its body as the basis of concepts. === Interaction of local environment === A third component of the embodied approach looks at how agents use their immediate environment in cognitive processing. Meaning, the local environment is seen as an actual extension of the body's cognitive process. The example of a personal digital assistant (PDA) is used to better imagine this. Echoing functionalism (philosophy of mind), this point claims that mental states are individuated by their role in a much larger system. So under this premise, the information on a PDA is similar to the information stored in the brain. So then if one thinks information in the brain constitutes mental states, then it must follow that information in the PDA is a cognitive state too. Consider also the role of pen and paper in a complex multiplication problem. The pen and paper are so involved in the cognitive process of solving the problem that it seems ridiculous to say they are somehow different from the process, in very much the same way the PDA is used for information like the brain. Another example examines how humans control and manipulate their environment

  Read more →
• 

  Structural risk minimization

  Structural risk minimization (SRM) is an inductive principle of use in machine learning. Commonly in machine learning, a generalized model must be selected from a finite data set, with the consequent problem of overfitting – the model becoming too strongly tailored to the particularities of the training set and generalizing poorly to new data. The SRM principle addresses this problem by balancing the model's complexity against its success at fitting the training data. This principle was first set out in a 1974 book by Vladimir Vapnik and Alexey Chervonenkis and uses the VC dimension. In practical terms, Structural Risk Minimization is implemented by minimizing E t r a i n + β H ( W ) {\displaystyle E_{train}+\beta H(W)} , where E t r a i n {\displaystyle E_{train}} is the train error, the function H ( W ) {\displaystyle H(W)} is called a regularization function, and β {\displaystyle \beta } is a constant. H ( W ) {\displaystyle H(W)} is chosen such that it takes large values on parameters W {\displaystyle W} that belong to high-capacity subsets of the parameter space. Minimizing H ( W ) {\displaystyle H(W)} in effect limits the capacity of the accessible subsets of the parameter space, thereby controlling the trade-off between minimizing the training error and minimizing the expected gap between the training error and test error. The SRM problem can be formulated in terms of data. Given n data points consisting of data x and labels y, the objective J ( θ ) {\displaystyle J(\theta )} is often expressed in the following manner: J ( θ ) = 1 2 n ∑ i = 1 n ( h θ ( x i ) − y i ) 2 + λ 2 ∑ j = 1 d θ j 2 {\displaystyle J(\theta )={\frac {1}{2n}}\sum _{i=1}^{n}(h_{\theta }(x^{i})-y^{i})^{2}+{\frac {\lambda }{2}}\sum _{j=1}^{d}\theta _{j}^{2}} The first term is the mean squared error (MSE) term between the value of the learned model, h θ {\displaystyle h_{\theta }} , and the given labels y {\displaystyle y} . This term is the training error, E t r a i n {\displaystyle E_{train}} , that was discussed earlier. The second term, places a prior over the weights, to favor sparsity and penalize larger weights. The trade-off coefficient, λ {\displaystyle \lambda } , is a hyperparameter that places more or less importance on the regularization term. Larger λ {\displaystyle \lambda } encourages sparser weights at the expense of a more optimal MSE, and smaller λ {\displaystyle \lambda } relaxes regularization allowing the model to fit to data. Note that as λ → ∞ {\displaystyle \lambda \to \infty } the weights become zero, and as λ → 0 {\displaystyle \lambda \to 0} , the model typically suffers from overfitting.

  Read more →
• 

  Adversarial stylometry

  Adversarial stylometry is the practice of altering writing style to reduce the potential for stylometry to discover the author's identity or their characteristics. This task is also known as authorship obfuscation or authorship anonymisation. Stylometry poses a significant privacy challenge in its ability to unmask anonymous authors or to link pseudonyms to an author's other identities, which, for example, creates difficulties for whistleblowers, activists, and hoaxers and fraudsters. The privacy risk is expected to grow as machine learning techniques and text corpora develop. All adversarial stylometry shares the core idea of faithfully paraphrasing the source text so that the meaning is unchanged but the stylistic signals are obscured. Such a faithful paraphrase is an adversarial example for a stylometric classifier. Several broad approaches to this exist, with some overlap: imitation, substituting the author's own style for another's; translation, applying machine translation with the hope that this eliminates characteristic style in the source text; and obfuscation, deliberately modifying a text's style to make it not resemble the author's own. Manually obscuring style is possible, but laborious; in some circumstances, it is preferable or necessary. Automated tooling, either semi- or fully-automatic, could assist an author. How best to perform the task and the design of such tools is an open research question. While some approaches have been shown to be able to defeat particular stylometric analyses, particularly those that do not account for the potential of adversariality, establishing safety in the face of unknown analyses is an issue. Ensuring the faithfulness of the paraphrase is a critical challenge for automated tools. It is uncertain if the practice of adversarial stylometry is detectable in itself. Some studies have found that particular methods produced signals in the output text, but a stylometrist who is uncertain of what methods may have been used may not be able to reliably detect them. == History == Rao & Rohatgi (2000), an early work in adversarial stylometry, identified machine translation as a possibility, but noted that the quality of translators available at the time presented severe challenges. Kacmarcik & Gamon (2006) is another early work. Brennan, Afroz & Greenstadt (2012) performed the first evaluation of adversarial stylometric methods on actual texts. Brennan & Greenstadt (2009) introduced the first corpus of adversarially authored texts specifically for evaluating stylometric methods; other corpora include the International Imitation Hemingway Competition, the Faux Faulkner contest, and the hoax blog A Gay Girl in Damascus. == Motivations == Rao & Rohatgi (2000) suggest that short, unattributed documents (i.e., anonymous posts) are not at risk of stylometric identification, but pseudonymous authors who have not practiced adversarial stylometry in producing corpuses of thousands of words may be vulnerable. Narayanan et al. (2012) attempted large-scale deanonymisation of 100,000 blog authors with mixed results: the identifications were significantly better than chance, but only accurately matched the blog and author a fifth of the time; identification improved with the number of posts written by the author in the corpus. Even if an author is not identified, some of their characteristics may still be deduced stylometrically, or stylometry may narrow the anonymity set of potential authors sufficiently for other information to complete the identification. Detecting author characteristics (e.g., gender or age) is often simpler than identifying an author from a large, possibly open, set of candidates. Modern machine learning techniques offer powerful tools for identification; further development of corpora and computational stylometric techniques are likely to raise further privacy issues. Gröndahl & Asokan (2020a) say that the general validity of the hypothesis underlying stylometry—that authors have invariant, content-independent 'style fingerprints'—is uncertain, but "the deanonymisation attack is a real privacy concern". Those interested in practicing adversarial stylometry and stylistic deception include whistleblowers avoiding retribution; journalists and activists; perpetrators of frauds and hoaxes; authors of fake reviews; literary forgers; criminals disguising their identity from investigators; and, generally, anyone with a desire for anonymity or pseudonymity. Authors, or agents acting on behalf of authors, may also attempt to remove stylistic clues to author characteristics (e.g., race or gender) so that knowledge of those characteristics cannot be used for discrimination (e.g., through algorithmic bias). Another possible use for adversarial stylometry is in disguising automatically generated text as human-authored. == Methods == With imitation, the author attempts to mislead stylometry by matching their style to another author's. An incomplete imitation, where some of the true author's unique characteristics appear alongside the imitated author's, can be a detectable signal for the use of adversarial stylometry. Imitation can be performed automatically with style transfer systems, though this typically requires a large corpus in the target style for the system to learn from. Another approach is translation, which employs machine translation of a source text to eliminate characteristic style, often through multiple translators in sequence to produce a round-trip translation. Such chained translation can lead to texts being significantly altered, even to the point of incomprehensibility; improved translation tools reduce this risk. More simply-structured texts can be easier to machine translate without losing the original meaning. Machine translation blurs into direct stylistic imitation or obfuscation achieved through automated style transfer, which can be viewed as a "translation" with the same language as input and output. With low-quality translation tools, an author can be required to manually correct major translation errors while avoiding the hazard of re-introducing stylistic characteristics. Wang, Juola & Riddell (2022) found that gross errors introduced by Google Translate were rare, but more common with several intermediate translations—however, occasional simple or short sentences and misspellings in the source text appeared verbatim in the output, potentially providing an identifying signal. Chain translation can leave characteristic traces of its application in a document, which may allow reconstruction of the intermediate languages used and the number of translation steps performed. Obfuscation involves deliberately changing the style of a text to reduce its similarity to other texts by some metric; this may be performed at the time of writing by conscious modification, or as part of a revision process with feedback from the metric being targeted as an input to decide when the text has been sufficiently obfuscated. In contrast to translation, complex texts can offer more opportunities for effective obfuscation without altering meaning, and likewise genres with more permissible variation allow more obfuscation. However, longer texts are harder to thoroughly obfuscate. Obfuscation can blend into imitation if the author develops a novel target style, distinct from their original style. With respect to masking author characteristics, obfuscation may aim to achieve a union (adding signals for imitated characteristics) or an intersection (removing signals and normalising) of other authors' styles. Avoiding the author's own idiosyncrasies and producing a "normalised" text is a critical obfuscatory step: an author may have a unique tendency to misspell certain words, use particular variants, or to format a document in a characteristic way. Stylometric signals vary in how simply they can be adversarially masked; an author may easily change their vocabulary by conscious choice, but altering the pattern of grammar or the letter frequency in their text may be harder to achieve, though Juola & Vescovi (2011) report that imitation typically succeeds at masking more characteristics than obfuscation. Automated obfuscation may require large amounts of training data written by the author. Concerning automated implementations of adversarial stylometry, two possible implementations are rule-based systems for paraphrasing; and encoder–decoder architectures, where the text passes through an intermediate format that is (intended to be) style-neutral. Another division in automated methods is whether there is feedback from an identification system or not. With such feedback, finding paraphrases for author masking has been characterised as a heuristic search problem, exploring textual variants until the result is stylistically sufficiently far (in the case of obfuscation) or near (in the case of imitation), which then constitutes an adversarial example for that identification system. == Evaluation == How

  Read more →
• 

  Inductive programming

  Inductive programming (IP) is a special area of automatic programming, covering research from artificial intelligence and programming, which addresses learning of typically declarative (logic or functional) and often recursive programs from incomplete specifications, such as input/output examples or constraints. Depending on the programming language used, there are several kinds of inductive programming. Inductive functional programming, which uses functional programming languages such as Lisp or Haskell, and most especially inductive logic programming, which uses logic programming languages such as Prolog and other logical representations such as description logics, have been more prominent, but other (programming) language paradigms have also been used, such as constraint programming or probabilistic programming. == Definition == Inductive programming incorporates all approaches which are concerned with learning programs or algorithms from incomplete (formal) specifications. Possible inputs in an IP system are a set of training inputs and corresponding outputs or an output evaluation function, describing the desired behavior of the intended program, traces or action sequences which describe the process of calculating specific outputs, constraints for the program to be induced concerning its time efficiency or its complexity, various kinds of background knowledge such as standard data types, predefined functions to be used, program schemes or templates describing the data flow of the intended program, heuristics for guiding the search for a solution or other biases. Output of an IP system is a program in some arbitrary programming language containing conditionals and loop or recursive control structures, or any other kind of Turing-complete representation language. In many applications the output program must be correct with respect to the examples and partial specification, and this leads to the consideration of inductive programming as a special area inside automatic programming or program synthesis, usually opposed to 'deductive' program synthesis, where the specification is usually complete. In other cases, inductive programming is seen as a more general area where any declarative programming or representation language can be used and we may even have some degree of error in the examples, as in general machine learning, the more specific area of structure mining or the area of symbolic artificial intelligence. A distinctive feature is the number of examples or partial specification needed. Typically, inductive programming techniques can learn from just a few examples. The diversity of inductive programming usually comes from the applications and the languages that are used: apart from logic programming and functional programming, other programming paradigms and representation languages have been used or suggested in inductive programming, such as functional logic programming, constraint programming, probabilistic programming, abductive logic programming, modal logic, action languages, agent languages and many types of imperative languages. == History == The early works of Plotkin, and his "relative least general generalization (rlgg)", had an enormous impact in inductive logic programming. There were some encouraging results on learning recursive Prolog programs such as quicksort from examples together with suitable background knowledge, for example with GOLEM. However, after initial success, the community got disappointed by limited progress about the induction of recursive programs with ILP less and less focusing on recursive programs and leaning more and more towards a machine learning setting with applications in relational data mining and knowledge discovery. In parallel to work in ILP, Koza proposed genetic programming in the early 1990s as a generate-and-test based approach to learning programs. The idea of genetic programming was further developed into the inductive programming system ADATE and the systematic-search-based system MagicHaskeller. Here again, functional programs are learned from sets of positive examples together with an output evaluation (fitness) function which specifies the desired input/output behavior of the program to be learned. The early work in grammar induction (also known as grammatical inference) is related to inductive programming, as rewriting systems or logic programs can be used to represent production rules. In fact, early works in inductive inference considered grammar induction and Lisp program inference as basically the same problem. The results in terms of learnability were related to classical concepts, such as identification-in-the-limit, as introduced in the seminal work of Gold. More recently, the language learning problem was addressed by the inductive programming community. In the recent years, the classical approaches have been resumed and advanced with great success. Therefore, the synthesis problem has been reformulated on the background of constructor-based term rewriting systems taking into account modern techniques of functional programming, as well as moderate use of search-based strategies and usage of background knowledge as well as automatic invention of subprograms. Many new and successful applications have recently appeared beyond program synthesis, most especially in the area of data manipulation, programming by example and cognitive modelling (see below). Other ideas have also been explored with the common characteristic of using declarative languages for the representation of hypotheses. For instance, the use of higher-order features, schemes or structured distances have been advocated for a better handling of recursive data types and structures; abstraction has also been explored as a more powerful approach to cumulative learning and function invention. One powerful paradigm that has been recently used for the representation of hypotheses in inductive programming (generally in the form of generative models) is probabilistic programming (and related paradigms, such as stochastic logic programs and Bayesian logic programming). == Application areas == The first workshop on Approaches and Applications of Inductive Programming (AAIP) Archived 2016-03-03 at the Wayback Machine held in conjunction with ICML 2005 identified all applications where "learning of programs or recursive rules are called for, [...] first in the domain of software engineering where structural learning, software assistants and software agents can help to relieve programmers from routine tasks, give programming support for end users, or support of novice programmers and programming tutor systems. Further areas of application are language learning, learning recursive control rules for AI-planning, learning recursive concepts in web-mining or for data-format transformations". Since then, these and many other areas have shown to be successful application niches for inductive programming, such as end-user programming, the related areas of programming by example and programming by demonstration, and intelligent tutoring systems. Other areas where inductive inference has been recently applied are knowledge acquisition, artificial general intelligence, reinforcement learning and theory evaluation, and cognitive science in general. There may also be prospective applications in intelligent agents, games, robotics, personalisation, ambient intelligence and human interfaces.

  Read more →
• 

  Representation collapse

  Representation collapse is a phenomenon in machine learning and representation learning where a model maps different inputs to the same or very similar embeddings, which means it loses important information about how the data is spread out. It is frequently encountered in self-supervised learning, especially within contrastive and non-contrastive frameworks, when training objectives or model architectures do not maintain variance across representations. Collapse results in degenerate solutions characterized by uninformative learned features, significantly impairing downstream task performance. Various techniques have been proposed to mitigate representation collapse, including the use of negative samples, architectural asymmetry, stop-gradient operations, variance regularization, and redundancy reduction objectives, as seen in methods such as SimCLR, BYOL, and VICReg. Comprehending and averting representation collapse is regarded as a fundamental challenge in the advancement of stable and efficient self-supervised learning systems.

  Read more →