AI Detector Deepseek

AI Detector Deepseek — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Apertus (LLM)

Apertus is a public large language model, developed by the Swiss AI Initiative (a collaboration between EPFL, ETH Zurich, and the Swiss National Supercomputing Centre). It was released on September 2, 2025, under the free and open-source Apache 2.0 license. Designed initially for business and research use cases around the world, Apertus was trained on over 1800 languages, and comes in 8 billion or 70 billion parameter versions and is available on Hugging Face for download. The model was developed aiming to adhere to European copyright law, and is one of the first examples of AI as a public good in the vein of AI Sovereignty. It is also the first large model to comply with the European Union's Artificial Intelligence Act. At its launch, the model creators emphasized multilinguality, transparency, and auditability as priorities in contrast to commercial frontier model. While international reception was largely positive, the first iteration was significantly behind the capabilities of frontier models and needs adaptation for many use cases with chatbots being a secondary but not a primary use case. As of late 2025, it was considered the largest and most capable fully open model. The capability of future models will depend in part on how much more funding can be secured.
Read more →
ROCm

ROCm is an Advanced Micro Devices (AMD) software stack for graphics processing unit (GPU) programming. ROCm spans several domains, including general-purpose computing on graphics processing units (GPGPU), high performance computing (HPC), and heterogeneous computing. It offers several programming models: HIP (GPU-kernel-based programming), OpenMP (directive-based programming), and OpenCL. ROCm is free, libre and open-source software (except the GPU firmware blobs), and it is distributed under various licenses. The name initially stood for Radeon Open Compute platform; however, due to Open Compute being a registered trademark, the name no longer functions as an acronym. == Background == The first GPGPU software stack from ATI/AMD was Close to Metal, which became Stream. ROCm was launched around 2016 with the Boltzmann Initiative. ROCm stack builds upon previous AMD GPU stacks; some tools trace back to GPUOpen and others to the Heterogeneous System Architecture (HSA). === Heterogeneous System Architecture Intermediate Language === HSAIL was aimed at producing a middle-level, hardware-agnostic intermediate representation that could be JIT-compiled to the eventual hardware (GPU, FPGA...) using the appropriate finalizer. This approach was dropped for ROCm: now it builds only GPU code, using LLVM, and its AMDGPU backend that was upstreamed, although there is still research on such enhanced modularity with LLVM MLIR. == Programming abilities == ROCm as a stack ranges from the kernel driver to the end-user applications. AMD has introductory videos about AMD GCN hardware, and ROCm programming via its learning portal. One of the best technical introductions about the stack and ROCm/HIP programming, remains, to date, to be found on Reddit. == Hardware support == ROCm is primarily targeted at discrete professional GPUs, but consumer GPUs and APUs of the same architecture as a supported professional GPU are known to work with ROCm. For example, all professional GPUs of the RDNA 2 architecture are officially supported by ROCm 5.x; users report that Consumer RDNA2 units such as the Radeon 6800M APU and the Radeon 6700XT GPU also work. === Professional-grade GPUs === === Consumer-grade GPUs === == Software ecosystem == === Machine learning === Various deep learning frameworks have a ROCm backend: PyTorch TensorFlow ONNX MXNet CuPy MIOpen Caffe Iree (which uses LLVM Multi-Level Intermediate Representation (MLIR)) llama.cpp === Supercomputing === ROCm is gaining significant traction in the top 500. ROCm is used with the Exascale supercomputers El Capitan and Frontier. Some related software is to be found at AMD Infinity hub. === Other acceleration & graphics interoperation === As of version 3.0, Blender can now use HIP compute kernels for its renderer cycles. === Other languages === ==== Julia ==== Julia has the AMDGPU.jl package, which integrates with LLVM and selects components of the ROCm stack. Instead of compiling code through HIP, AMDGPU.jl uses Julia's compiler to generate LLVM IR directly, which is later consumed by LLVM to generate native device code. AMDGPU.jl uses ROCr's HSA implementation to upload native code onto the device and execute it, similar to how HIP loads its own generated device code. AMDGPU.jl also supports integration with ROCm's rocBLAS (for BLAS), rocRAND (for random number generation), and rocFFT (for FFTs). Future integration with rocALUTION, rocSOLVER, MIOpen, and certain other ROCm libraries is planned. === Software distribution === ==== Official ==== Installation instructions are provided for Linux and Windows in the official AMD ROCm documentation. ROCm software is currently spread across several public GitHub repositories. Within the main public meta-repository, there is an XML manifest for each official release: using git-repo, a version control tool built on top of Git, is the recommended way to synchronize with the stack locally. AMD starts distributing containerized applications for ROCm, notably scientific research applications gathered under AMD Infinity Hub. AMD distributes itself packages tailored to various Linux distributions. ==== Third-party ==== There is a growing third-party ecosystem packaging ROCm. Linux distributions are officially packaging (natively) ROCm, with various degrees of advancement: Arch Linux, Gentoo, Debian, Fedora , GNU Guix, and NixOS. There are Spack packages. == Components == There is one kernel-space component, ROCk, and the rest - there is roughly a hundred components in the stack - is made of user-space modules. The unofficial typographic policy is to use: uppercase ROC lowercase following for low-level libraries, i.e. ROCt, and the contrary for user-facing libraries, i.e. rocBLAS. AMD is active developing with the LLVM community, but upstreaming is not instantaneous, and as of January 2022, is still lagging. AMD still officially packages various LLVM forks for parts that are not yet upstreamed – compiler optimizations destined to remain proprietary, debug support, OpenMP offloading, etc. === Low-level === ==== ROCk – Kernel driver ==== ==== ROCm – Device libraries ==== Support libraries implemented as LLVM bitcode. These provide various utilities and functions for math operations, atomics, queries for launch parameters, on-device kernel launch, etc. ==== ROCt – Thunk ==== The thunk is responsible for all the thinking and queuing that goes into the stack. ==== ROCr – Runtime ==== The ROC runtime is a set of APIs/libraries that allows the launch of compute kernels by host applications. It is AMD's implementation of the HSA runtime API. It is different from the ROC Common Language Runtime. ==== ROCm – CompilerSupport ==== ROCm code object manager is in charge of interacting with LLVM intermediate representation. === Mid-level === ==== ROCclr Common Language Runtime ==== The common language runtime is an indirection layer adapting calls to ROCr on Linux and PAL on windows. It used to be able to route between different compilers, like the HSAIL-compiler. It is now being absorbed by the upper indirection layers (HIP and OpenCL). ==== OpenCL ==== ROCm ships its installable client driver (ICD) loader and an OpenCL implementation bundled together. As of January 2022, ROCm 4.5.2 ships OpenCL 2.2, and is lagging behind competition. ==== HIP – Heterogeneous Interface for Portability ==== The AMD implementation for its GPUs is called HIPAMD. There is also a CPU implementation mostly for demonstration purposes. ==== HIPCC ==== HIP builds a `HIPCC` compiler that either wraps Clang and compiles with LLVM open AMDGPU backend, or redirects to the NVIDIA compiler. ==== HIPIFY ==== HIPIFY is a source-to-source compiling tool. It translates CUDA to HIP and reverse, either using a Clang-based tool, or a sed-like Perl script. ==== GPUFORT ==== Like HIPIFY, GPUFORT is a tool compiling source code into other third-generation-language sources, allowing users to migrate from CUDA Fortran to HIP Fortran. It is also in the repertoire of research projects, even more so. === High-level === ROCm high-level libraries are usually consumed directly by application software, such as machine learning frameworks. Most of the following libraries are in the General Matrix Multiply (GEMM) category, which GPU architecture excels at. The majority of these user-facing libraries comes in dual-form: hip for the indirection layer that can route to Nvidia hardware, and roc for the AMD implementation. ==== rocBLAS / hipBLAS ==== rocBLAS and hipBLAS are central in high-level libraries, it is the AMD implementation for Basic Linear Algebra Subprograms. It uses the library Tensile privately. ==== rocSOLVER / hipSOLVER ==== This pair of libraries constitutes the LAPACK implementation for ROCm and is strongly coupled to rocBLAS. === Utilities === ROCm developer tools: Debug, tracer, profiler, System Management Interface, Validation suite, Cluster management. GPUOpen tools: GPU analyzer, memory visualizer... External tools: radeontop (TUI overview) == Comparison with competitors == ROCm competes with other GPU computing stacks: Nvidia CUDA and Intel OneAPI. === Nvidia CUDA === Nvidia's CUDA is closed-source, whereas AMD ROCm is open source. There is open-source software built on top of the closed-source CUDA, for instance RAPIDS. CUDA is able to run on consumer GPUs, whereas ROCm support is mostly offered for professional hardware such as AMD Instinct and AMD Radeon Pro. Nvidia provides a C/C++-centered frontend and its Parallel Thread Execution (PTX) LLVM GPU backend as the Nvidia CUDA Compiler (NVCC). === Intel OneAPI === All the oneAPI corresponding libraries are published on its GitHub Page. ==== Unified Acceleration Foundation (UXL) ==== Unified Acceleration Foundation (UXL) is a new technology consortium that are working on the continuation of the OneAPI initiative, with the goal to create a new open standard accelerator software ecosystem, related open standards and specification projects through Working Groups and Specia
Read more →
Machine unlearning

Machine unlearning is a branch of machine learning focused on removing specific undesired element, such as private data, wrong or manipulated training data, outdated information, copyrighted material, harmful content, dangerous abilities, or misinformation, without needing to rebuild models from the ground up. Large language models, like the ones powering ChatGPT, may be asked not just to remove specific elements but also to unlearn a "concept," "fact," or "knowledge," which aren't easily linked to specific examples. New terms such as "model editing," "concept editing," and "knowledge unlearning" have emerged to describe this process. == History == Early research efforts were largely motivated by Article 17 of the GDPR, the European Union's privacy regulation commonly known as the "right to be forgotten" (RTBF), introduced in 2014. The GDPR did not anticipate that the development of large language models would make data erasure a complex task. This issue has since led to research on "machine unlearning," with a growing focus on removing copyrighted material, harmful content, dangerous capabilities, and misinformation. Just as early experiences in humans shape later ones, some concepts are more fundamental and harder to unlearn. A piece of knowledge may be so deeply embedded in the model's knowledge graph that unlearning it could cause internal contradictions, requiring adjustments to other parts of the graph to resolve them. Researchers have now also started studying unlearning in the context of removing incorrect or adversarially manipulated training data such as systematically biased labels or poisoning attacks. == Motivations == At present, machine unlearning is motivated by a growing range of concerns that extend well beyond the field's original focus on data privacy. A widely used taxonomy in the literature distinguishes two high-level categories of motivation. Access revocation covers cases where a data subject or rights holder requests the removal of data they own or control. This is most commonly associated with RTBF established by the European Union's General Data Protection Regulation (GDPR) and analogous legislation such as the California Consumer Privacy Act (CCPA). These regulations grant individuals the legal right to request erasure of their personal data from any system that has processed it, including models that were trained on it. Access revocation also encompasses the removal of copyrighted or pay-walled content that was incorporated into training corpora without the necessary licenses, a concern that has become prominent with the widespread use of largely web-scraped pre-training datasets. Model correction covers cases where the model exhibits undesirable behavior arising from the training data, regardless of any individual's request. This includes: Removal of toxic, biased, or unsafe outputs introduced by harmful content in the training set Correction of stale or factually incorrect associations, such as outdated knowledge encoded in a deployed model Removal of dangerous capabilities, such as detailed knowledge of the synthesis of chemical or biological agents Correction of the influence of data poisoning or adversarial attacks that have corrupted model behavior This second category has been formalized as corrective machine unlearning, which frames unlearning as a post-training mechanism for repairing the effects of bad or harmful training data. It is closely related to the AI safety literature, where data filtering alone has been found insufficient to prevent hazardous knowledge from being encoded in model weights, motivating unlearning as a complementary risk mitigation strategy. A further distinction has been drawn in the literature between removal {eliminating the influence of specific training data on model parameters) and suppression (preventing the model from generating specific outputs regardless of how that knowledge is encoded). These two goals are not equivalent: removing training data does not guarantee meaningful output suppression, and suppressing outputs does not constitute removal of the underlying training data's influence. == SISA Training == SISA is a training strategy consisting of four mechanisms designed to make machine unlearning more efficient by structuring how models are trained and updated. Its goal is to allow a system to remove the influence of specific data points without retraining an entire model from scratch. By reorganizing training data and workflows, SISA reduces the computational burden of unlearning requests. Sharding divides the training dataset into multiple disjoint subsets, or shards. Each shard is used to train a separate model instance. This ensures that a single data point affects only one shard, so unlearning it requires updating only the corresponding shard rather than the full model. Isolation refers to training each shard independently, with nothing shared across shards during the training process. This separation prevents cross-contamination between shards, ensuring that forgetting data in one shard does not require adjustments to any others. Slicing breaks the data within each shard into sequential slices and stores model states after each slice is trained on. When an unlearning request targets a piece of data, the system can roll back to the checkpoint before the point was seen and retrain only from that slice forward. This reduces retraining time even within a shard. Aggregation occurs at inference, when the model is queried. It combines the outputs of each shard to determine the output of the overall model. This is often through majority voting or averaging. This allows SISA-trained systems to behave like a single model despite being composed of multiple shard-level models. Together, these mechanisms enable machine learning systems to forget specific data points with far lower computational cost than full retraining. The trade-off is that sharding and slicing can lead to reduced model accuracy, worse generalization, and increased storage requirements for the intermediate checkpoints. This can be tolerable based on the needs of the individual or organization to comply with "right to be forgotten" or efficiently recover from backdoor attacks. == Algorithms == Machine unlearning algorithms are broadly categorized into exact and approximate methods, reflecting a fundamental trade-off between formal guarantees and computational tractability. === Exact Unlearning === Exact unlearning methods produce a model that is statistically indistinguishable from one retrained from scratch on the dataset with the forget data removed. The canonical framework for exact unlearning is SISA Training (Sharded, Isolated, Sliced, and Aggregated), introduced by Bourtoule et al. (2021). SISA partitions the training dataset into disjoint shards and trains a separate sub-model on each. At inference time, predictions are aggregated across sub-models. When an unlearning request is received, only the sub-model corresponding to the shard containing the target data requires retraining, reducing computational overhead proportionally to the number of shards. Exact methods provide the strongest guarantees but become prohibitively expensive for large pre-trained neural networks and are generally limited to settings where training can be structured in advance. === Approximate Unlearning === Approximate unlearning methods seek to produce a model whose behavior is sufficiently close to an exactly unlearned model without the cost of full retraining. These methods dominate practical applications. Common approaches include: Gradient Ascent: The model is fine-tuned by maximizing the loss on the forget set, directly degrading its performance on targeted data. This is the most direct approach but risks destabilizing performance on retained data. Random Labelling: The model is fine-tuned on the forget set using randomly shuffled labels, confusing its associations with the targeted data while producing a less aggressive weight shift than pure gradient ascent. Gradient Difference: Combines gradient ascent on the forget set with simultaneous gradient descent on the retain set, using the retain objective as a regularizer to preserve general model utility. KL Divergence Regularization: Minimizes the KL divergence between the outputs of the unlearned model and the original model on the retain set, anchoring behavior on data the model should remember. Weight Pruning and Fine-tuning: Parameters with the smallest L1-norm are pruned — targeting weights most weakly associated with general knowledge and potentially most associated with the forget set — followed by fine-tuning on the retain set to restore utility. Layer Reset and Fine-tuning: The first or last k layers are re-initialized to random weights and the model is subsequently fine-tuned on the retain set. This is a coarse but computationally simple approach. Selective Synaptic Dampening: Uses influence functions to estimate the effect of individual trainin
Read more →
Data-driven model

Data-driven models are a class of computational models that primarily rely on historical data collected throughout a system's or process' lifetime to establish relationships between input, internal, and output variables. Commonly found in numerous articles and publications, data-driven models have evolved from earlier statistical models, overcoming limitations posed by strict assumptions about probability distributions. These models have gained prominence across various fields, particularly in the era of big data, artificial intelligence, and machine learning, where they offer valuable insights and predictions based on the available data. == Background == These models have evolved from earlier statistical models, which were based on certain assumptions about probability distributions that often proved to be overly restrictive. The emergence of data-driven models in the 1950s and 1960s coincided with the development of digital computers, advancements in artificial intelligence research, and the introduction of new approaches in non-behavioural modelling, such as pattern recognition and automatic classification. == Key Concepts == Data-driven models encompass a wide range of techniques and methodologies that aim to intelligently process and analyse large datasets. Examples include fuzzy logic, fuzzy and rough sets for handling uncertainty, neural networks for approximating functions, global optimization and evolutionary computing, statistical learning theory, and Bayesian methods. These models have found applications in various fields, including economics, customer relations management, financial services, medicine, and the military, among others. Machine learning, a subfield of artificial intelligence, is closely related to data-driven modelling as it also focuses on using historical data to create models that can make predictions and identify patterns. In fact, many data-driven models incorporate machine learning techniques, such as regression, classification, and clustering algorithms, to process and analyse data. In recent years, the concept of data-driven models has gained considerable attention in the field of water resources, with numerous applications, academic courses, and scientific publications using the term as a generalization for models that rely on data rather than physics. This classification has been featured in various publications and has even spurred the development of hybrid models in the past decade. Hybrid models attempt to quantify the degree of physically based information used in hydrological models and determine whether the process of building the model is primarily driven by physics or purely data-based. As a result, data-driven models have become an essential topic of discussion and exploration within water resources management and research. The term "data-driven modelling" (DDM) refers to the overarching paradigm of using historical data in conjunction with advanced computational techniques, including machine learning and artificial intelligence, to create models that can reveal underlying trends, patterns, and, in some cases, make predictions Data-driven models can be built with or without detailed knowledge of the underlying processes governing the system behavior, which makes them particularly useful when such knowledge is missing or fragmented.
Read more →
Score bug

A score bug is a digital on-screen graphic which is displayed in a broadcast of a sporting event, displaying the current score and other statistics. It is similar in function to a scoreboard, and is usually placed at either the top or lower third of the television screen. == History == The concept of a persistent score bug was devised by Sky Sports head David Hill, who was dissatisfied over having to wait to see what the score was after tuning into a football match in-progress. The score bug was introduced when Sky launched its coverage of the then newly-formed English Premier League in August 1992. Hill's boss repeatedly demanded that the graphic be removed, describing it as the "stupidest thing [he] had ever seen". Hill defied the boss's demands and kept the graphic in place. ITV introduced a score bug at the start of the 1993–94 football season, and the BBC introduced a score bug towards the end of 1993. The concept was introduced to the United States by ABC Sports and ESPN during coverage of the 1994 FIFA World Cup. Their justification for the graphic was to provide a location for a rotating series of sponsor logos, in order to allow matches to air without commercial interruption. With the acquisition of rights to the National Football League (NFL) by BSkyB's American sibling Fox (a fellow venture of Rupert Murdoch), Hill became the first president of Fox Sports. Under Hill's leadership, Fox introduced a version of the score bug branded as the "Fox Box", which was part of its inaugural season of NFL coverage in 1994. Variety criticized it as an "annoying see-through clock and score graphic" and expressed concern for people "who actually watched the beginning of the game and would rather have their screen clear of graphics". Hill even received a death threat from an irate viewer, with a specific emphasis on him being a "foreigner", but the score bug soon became a ubiquitous feature for American football broadcasts, along with almost all American sports broadcasts in the years that followed. Dick Ebersol of NBC Sports initially opposed the idea of a score bug, as he thought that fans would dislike seeing more graphics on the screen and would change the channel from blowout games if the score was constantly being displayed. Since the 2010s, the on-air design and positioning of some score bugs have been influenced by the needs of Internet video (especially when viewing an event on devices with smaller screens), including bugs noticeably larger than prior iterations designed with television viewing in mind, or designs primarily kept towards the bottom-center of the screen (easing the ability for the bug to remain visible when highlights are cropped for square videos posted on social media). == Details == Score bugs used in team sports typically include the names of both teams, an abbreviation of the team's name, and/or the team's logo; for individual sports, they include the names of individual competitors. In sports where a game clock or playing periods are used, those are generally also displayed as part of the score bug. Some broadcasts also include teams' win-loss records. In 2024, ESPN experimented with adding a persistent win probability meter to its bug in Major League Baseball, which was based on input from its statisticians. === Variations === In addition to the above information, score bugs in some sports include additional information: In baseball, score bugs display the current inning, number of outs, the pitch clock if applicable, and a graphic displaying which bases are occupied; and usually include names of the current pitcher and batter, the pitcher's pitch count, and the number of balls and strikes accrued by the batter. In basketball, score bugs generally include the shot clock, the number of fouls accrued by each team, and whether a team is in the bonus. In cricket, score bugs often take the form of larger dashboards across the bottom of the screen, displaying the current team up and their number of runs, wickets, and overs, a display showing the runs scored and number of balls faced by the current batting partnership, and statistics for the opposing team's bowler (including the number of wickets scored and runs given up). In American football, score bugs usually include the play clock and the down and distance of the current play; they also incorporate graphics indicating when a penalty flag has been thrown. In ice hockey, score bugs display when a penalty or power play is in effect, and often include the number of shots on goal accrued by each team. In golf, Fox popularized the display of a persistent leaderboard graphic in the bottom-right of the screen, usually displaying the top 5. ==== Racing ==== Telecasts of automobile races often include a score bug with the current positions of participants, statistics such as distance behind the leader, and the remaining distance or number of laps. In the mid-2010s, NASCAR broadcasters such as Fox began to transition from horizontal tickers to vertical leaderboards (also referred to as "pylons", in reference to the physical scoring pylons at). The CW differentiated itself by using a horizontal display that divides the field into multiple columns along the bottom of the screen.
Read more →
Operation Serenata de Amor

Operation Serenata de Amor is an artificial intelligence project designed to analyze public spending in Brazil. The project has been funded by a recurrent financing campaign since September 7, 2016, and came in the wake of major scandals of misappropriation of public funds in Brazil, such as the Mensalão scandal and what was revealed in the Operation Car Wash investigations. The analysis began with data from the National Congress then expanded to other types of budget and instances of government, such as the Federal Senate. The project is built through collaboration on GitHub and using a public group with more than 600 participants on Telegram. The name "Serenata de Amor," which means "serenade of love," was taken from a popular cashew cream bonbon produced by Chocolates Garoto in Brazil. == Modules == Throughout development of the project, new modules have been newly introduced in addition to the main repository: The main repository, serenata-de-amor, serves as the starting point for investigative work. Rosie is the robot programmed to identify public funds expenses with discrepancies, starting with CEAP (Quota for Exercise of Parliamentary Activity); it analyzes each of the reimbursements requested by the deputies and senators, indicating the reasons that lead it to believe they are suspicious. From Rosie was born whistleblower, which tweets under the name of @RosieDaSerenata, distributing the results found on social media. Jarbas (Github repository) is a data visualization tool which shows a complete list of reimbursements made available by the Chamber of Deputies and mined by Rosie. Toolbox is a Python installable package that supports the development of Serenata de Amor and Rosie. == History == Operation Serenata de Amor is an Artificial intelligence project for analysis of public expenditures. It was conceived in March 2016 by data scientist Irio Musskopf, sociologist Eduardo Cuducos and entrepreneur Felipe Cabral. The project was financed collectively in the Catarse platform, where it reached 131% of the collection goal paying 3 months of project development. Ana Schwendler, also a data scientist, Pedro Vilanova "Tonny", data journalist, Bruno Pazzim, software engineer, Filipe Linhares, a frontend engineer, Leandro Devegili, an entrepreneur and André Pinho took the first steps towards constructing the platform, such as collecting and structuring the first datasets. Jessica Temporal, data scientist and Yasodara Córdova "Yaso", researcher, Tatiana Balachova "Russa", UX designer, joined the project after the financing took place. The members created a recurring financing campaign, expanding the analysis of public spending to the Federal Senate. Donors make monthly payments ranging from 5 BRL to 200 BRL to maintain group activities. The monthly amount collected is around 10,000 BRL. == Results == In January 2017, concluding the period financed by the initial campaign, the group carried out an investigation into the suspicious activities found by the data analysis system. 629 complaints were made to the Ombudsman's Office of the Chamber of Deputies, questioning expenses of 216 federal deputies. In addition, the Facebook project page has more than 25,000 followers, and users frequently cite the operation as a benchmark in transparency in the Brazilian government. One of the examples of results obtained by the operation is the case of the Deputy who had to return about 700 BRL to the House after his expenses were analyzed by the platform. The platform was able to analyze more than 3 million notes, raising about 8,000 suspected cases in public spending. The community that supports the work of the team benefits from open source repositories, with licenses open for the collaboration. So much so that the two main data scientists of the project presented it at the CivicTechFest in Taipei, obtaining several mentions even in the international press. The technical leader presented the project in Poland during DevConf2017 in Kraków. It was also presented in the Google News Lab in 2017. It was presented by Yaso, when she was the Director of the initiative, at the MIT Media Lab/Berkman Klein Center Initiative for Artificial Intelligence ethics, and at the Artificial Intelligence and Inclusion Symposium, an initiative of the Global Network of Internet & Society Centers (NoC). It was also presented both by Irio and Yaso at the Digital Harvard Kennedy School, over a lunch seminar, where the transparency of the platform and the main solutions found were discussed, so that the code and data are always available to verify its suitability. This infographic provides information about the first results of Operation Serenata de Amor, a project that analyzes open data on public spending to find discrepancies. The project was presented by Yaso to the House Audit and Control Committee of the Chamber of Deputies in August 2017, and raised the interest of House officials who work with open data. The operation has been a source of inspiration for other civic projects that aim to work with similar goals, demonstrating the broader impact of artificial intelligence also in industry in Brazil. Participation of several team members in events throughout Brazil and abroad can be found on the Internet, such as presentation at OpenDataDay, held at Calango Hackerspace in the Federal District, Campus Party Bahia, Campus Party Brasilia, Friends of Tomorrow, XIII National Meeting of Internal Control, in the event USP Talks Hackfest against corruption in João Pessoa, the latter being also highlighted in the National Press.
Read more →
Structural risk minimization

Structural risk minimization (SRM) is an inductive principle of use in machine learning. Commonly in machine learning, a generalized model must be selected from a finite data set, with the consequent problem of overfitting – the model becoming too strongly tailored to the particularities of the training set and generalizing poorly to new data. The SRM principle addresses this problem by balancing the model's complexity against its success at fitting the training data. This principle was first set out in a 1974 book by Vladimir Vapnik and Alexey Chervonenkis and uses the VC dimension. In practical terms, Structural Risk Minimization is implemented by minimizing E t r a i n + β H ( W ) {\displaystyle E_{train}+\beta H(W)} , where E t r a i n {\displaystyle E_{train}} is the train error, the function H ( W ) {\displaystyle H(W)} is called a regularization function, and β {\displaystyle \beta } is a constant. H ( W ) {\displaystyle H(W)} is chosen such that it takes large values on parameters W {\displaystyle W} that belong to high-capacity subsets of the parameter space. Minimizing H ( W ) {\displaystyle H(W)} in effect limits the capacity of the accessible subsets of the parameter space, thereby controlling the trade-off between minimizing the training error and minimizing the expected gap between the training error and test error. The SRM problem can be formulated in terms of data. Given n data points consisting of data x and labels y, the objective J ( θ ) {\displaystyle J(\theta )} is often expressed in the following manner: J ( θ ) = 1 2 n ∑ i = 1 n ( h θ ( x i ) − y i ) 2 + λ 2 ∑ j = 1 d θ j 2 {\displaystyle J(\theta )={\frac {1}{2n}}\sum _{i=1}^{n}(h_{\theta }(x^{i})-y^{i})^{2}+{\frac {\lambda }{2}}\sum _{j=1}^{d}\theta _{j}^{2}} The first term is the mean squared error (MSE) term between the value of the learned model, h θ {\displaystyle h_{\theta }} , and the given labels y {\displaystyle y} . This term is the training error, E t r a i n {\displaystyle E_{train}} , that was discussed earlier. The second term, places a prior over the weights, to favor sparsity and penalize larger weights. The trade-off coefficient, λ {\displaystyle \lambda } , is a hyperparameter that places more or less importance on the regularization term. Larger λ {\displaystyle \lambda } encourages sparser weights at the expense of a more optimal MSE, and smaller λ {\displaystyle \lambda } relaxes regularization allowing the model to fit to data. Note that as λ → ∞ {\displaystyle \lambda \to \infty } the weights become zero, and as λ → 0 {\displaystyle \lambda \to 0} , the model typically suffers from overfitting.
Read more →
Artificial Inventor Project

The Artificial Inventor Project (AIP) is a global legal initiative headed by Professor Ryan Abbott dedicated to pursuing intellectual property (IP) rights for inventions and creative works generated autonomously by artificial intelligence (AI) systems without traditional human inventorship or authorship. The project coordinates a series of pro bono test cases worldwide, aiming to prompt law reform and public debate on how IP law should accommodate non-human creators. == History == In 2019, AIP filed patent applications in multiple jurisdictions, including the United States, United Kingdom, European Patent Office, Australia, Switzerland, and South Africa, naming the AI system DABUS (Device for the Autonomous Bootstrapping of Unified Sentience), created by Stephen Thaler, as the inventor. The aim was to challenge legal norms that require inventors to be natural persons and highlight pressing policy questions about AI-generated innovation and IP regimes. == Legal proceedings by jurisdiction == === Australia === In July 2021, a Federal Court of Australia judge (Beach J) ruled that AI can be considered an inventor under the Patents Act 1990, ordering IP Australia to reinstate the relevant patent. However, the full court then overturned this ruling on appeal and denied further review. === European Patent Office === The EPO Board of Appeal determined in 2022 that only a human inventor may be named, rendering DABUS‑based applications unacceptable. === South Africa === In 2021, a patent was granted listing DABUS as the inventor. As South Africa’s procedural system does not involve substantive inventorship review, the grant proceeded on formal grounds alone. === Switzerland === On 26 June 2025, the Swiss Federal Administrative Court ruled that artificial intelligence systems such as DABUS cannot be listed as inventors on patent applications. The court upheld the existing practice of the Swiss Federal Institute of Intellectual Property (IPI), affirming that only natural persons may be recognized as inventors under Swiss patent law. === United Kingdom === In December 2023, the UK Supreme Court unanimously held that AI systems cannot be legally recognized as inventors, affirming that "an inventor must be a person" under current British law. === United States === In Thaler v. Hirshfeld (2021), a U.S. federal court agreed with the USPTO that inventors must be natural persons, rejecting the DABUS application and setting a precedent consistent with existing statute and administrative policy. == Criticism and impact == The project has fueled substantial discourse. Critics caution that allowing AI inventorship may complicate notions of accountability and ownership. Proponents argue that legal recognition must evolve to avoid disincentivizing innovation produced by AI and to maintain honesty about the true source of invention.
Read more →
I Am Rich

I Am Rich is a discontinued 2008 mobile app for iPhones which had minimal function and was priced at US$999.99 (equivalent to $1,495 in 2025). The app was pulled from the App Store less than 24 hours after its launch. Receiving negative reviews from critics, only eight copies were sold. In the years since, several similar applications have been released at lower prices. == Overview == I Am Rich was developed as a joke by German software developer, Armin Heinrich, after he saw iPhone users complaining about software priced above $0.99. The app only showed a glowing red gem and an icon that, when pressed, displayed the following mantra in large text: I am richI deserv [sic] itI am good,healthy & successful Heinrich told The New York Times that "I regard it as art. I did not expect many people to buy it and did not expect all the fuss about it." The application is described as "a work of art with no hidden function at all", with its only purpose being to show other people that they were able to afford it. Vox writer Zachary Crockett called it "the ultimate Veblen good in app form". == Release == Heinrich released and distributed I Am Rich through the App Store on 5 August 2008. The app was sold for US$999.99 (equivalent to $1,495 in 2025), €799.99 (equivalent to €1,078 in 2023), and £599.99 (equivalent to £978.12 in 2025)—the highest prices Apple allowed for App Store content. Without explanation, the application was removed from the App Store by Apple less than a day after its release. === Purchases === Eight people bought the application, at least one of whom claimed to have done so accidentally. Six US sales and two European sales netted $5,600 for Heinrich and $2,400 for Apple (respectively equivalent to $8,374 and $3,589 in 2025). In correspondence with the Los Angeles Times, Heinrich told the newspaper that Apple had refunded two purchasers of his app, and that he was happy to not have dissatisfied customers. == Reception == Discussing the app on the website Silicon Alley Insider, Dan Frommer described the program as a "scam", "worthless", and finally "a joke that smells like a scammy rip-off" on August 5, 6, and 8, respectively. Without purchasing the app, Fox News's Paul Wagenseil guessed that the secret mantra was "German for 'Sucker!'" (Heinrich is German). Wired's Brian X. Chen described I Am Rich as a waste of money to "prove you're a jerk", and contrasted the expenditure with donating to cancer foundations and Third World countries. Heinrich told the Los Angeles Times's Mark Milian that he had received correspondence from satisfied customers: "I've got e-mails from customers telling me that they really love the app [... and that they had] no trouble spending the money". In an interview with The New York Times, though, he told of receiving many insulting emails and telephone messages. == Similar applications == The next year, Heinrich released I Am Rich LE. Priced at US$9.99 (equivalent to $14.99 in 2025), the new app has several new features (including a calculator, "help system", and the "famous mantra without the spelling mistakes") to meet Apple's requirement that apps have "definable content". Some customers were disappointed by the new functionality, poorly rating the app due to its ostensible improvements. On 23 February 2009, CNET Asia reported on the "conceptually similar" app, I Am Richer, developed by Mike DG for Google's Android. The app was released on the Android Market for US$200 (equivalent to $300.14 in 2025), a limit imposed by Google, who had no objection to the application. With the same name, the I Am Rich that was released on the Windows Phone Marketplace on 22 December 2010, was developed by DotNetNuzzi. Described by MobileCrunch as equally useless as the original, this app cost US$499.99 (equivalent to $738.2 in 2025), the price cap imposed by Microsoft.
Read more →
Space-based data center

Space-based data centers or orbital AI infrastructure are proposed concepts to build AI data centers in the sun-synchronous orbit or other orbits utilizing space-based solar power. Electric power has become the main bottleneck for terrestrial AI infrastructure. Space-based edge computing has historical roots in military architectures designed to bypass the latency of ground-based targeting networks. In the 1980s, the Strategic Defense Initiative's Brilliant Pebbles program first envisioned autonomous on-orbit data processing for missile defense. In 2019, the Space Development Agency (SDA) began to revive this decentralized approach through its Proliferated Warfighter Space Architecture (PWSA). This ambitious "sensor-to-shooter" infrastructure is treated as a prerequisite for the modern Golden Dome program, which would rely on space-based data processing to continuously track targets. == History == Early thinking about space-based computing infrastructure grew out of mid-20th-century visions for large orbital industrial systems, most notably proposals for space-based solar power, which were popularized in both technical literature and science writing by figures such as Isaac Asimov in the 1940s. These ideas emphasized exploiting the vacuum, continuous solar energy, and thermal characteristics of space to support power-intensive activities that would be difficult or inefficient on Earth. In the 21st century, advances in small satellites, reusable launch vehicles, and high-performance computing revived interest in space-based data centers, with governments and private companies exploring orbital or near-space platforms for edge computing, secure data handling, and low-latency processing of Earth-observation data. In September 2024, Y Combinator-backed Starcloud released a white paper detailing plans to build multiple gigawatts of AI compute in orbit. It was the first widely cited proposal to actually start building large orbital data centers. In 2025, Starcloud deployed an NVIDIA H100-class system and became the first company to train an LLM in space and run a version of Google Gemini in space. In March 2025, Lonestar deployed a data backup machine on the surface of the moon. In early January 2026, a team from the University of Pennsylvania presented a tether-based architecture for orbital data centers at the AIAA SciTech conference. The design relied on gravity gradient tension and solar-pressure-based passive attitude stabilization to minimize the mass of MW-scale orbital data centers. In January 2026, SpaceX filed plans with the Federal Communications Commission (FCC) for millions of satellites, leveraging reusable launches and Starlink integration to extend cloud and AI computing into orbit. Around the same time, Blue Origin announced the TeraWave constellation of about 5,400 satellites, designed to provide high‑throughput networking for data centers, enterprise, and government customers. Meanwhile, China announced a 200,000‑satellite constellation, focusing on state coordination, data sovereignty, and in-orbit processing for secure, time-critical applications. In February 2026, Starcloud submitted a proposal to the FCC for a constellation of up to 88,000 satellites for orbital data centers. In March, it announced intentions to be the first to mine Bitcoin in space, flying bitcoin mining ASICs on its second satellite, Starcloud-2. In May 2026, Edge Aerospace was awarded a contract by the European Space Agency under its Space Cloud program to study use cases, architectures and implementation roadmap for orbital data centers. == Feasibility == In October 2025, Nature Electronics published a study led by a research group at Nanyang Technological University on the development of carbon-neutral data centres in space. In November 2025, Google published a feasibility study on space-based data centers. The authors argued that if launch costs to low earth orbit reached US$200/kg, the launch cost for data center satellites could be cost effective relative to current energy costs for ground-based data centers. They project this may occur around 2035 if SpaceX's Starship project scales to 180 launches/year by then. == Advantages == Some sun-synchronous orbit (SSO) planes have constant sunlight in the dawn/dusk which could provide continuous solar energy. SSO is a limited resource and proper management and sharing of it is required. Solar irradiance is 36% higher in Earth orbit than on the surface No Earth weather storms or clouds, however more exposed to Solar storms. No property tax or land-use regulation. Saves space for other land use. Ample space for scalability. Won't strain the power grid. Direct access to power source without additional infrastructure. == Disadvantages == The deployment of space-based data centers raises several technical, economic, and environmental concerns. Existing launch costs are substantial and remains main cost of space infrastructure deployment Cooling is limited to heat dissipation through radiation only, which made in inefficient in comparison to convection in terrestrial data centers Space infrastructure must be designed to survive launch and to work under environment conditions of radiation, wide range of temperatures, in vacuum and in microgravity In-space assembly is on early development stage to enable deployment of mega-structures Megastructures are particularly exposed to orbital debris Solar arrays efficiency decrease 0.5% to 0.8% per year due to exposure of ultraviolet rays, space weather and orbital thermal cycles Hardware is designed for limited lifespan. Maintenance and repair in space (known as On-Orbit Servicing (OOS)) is still on early stage of practical implementation. Disposable data centre: technology obsolescence of AI data centre being a concern and difficult maintenance in space imply the single-use purpose of those space data centres. To extend lifetime, space infrastructure will require either refueling or orbit rasie by the servicer, which is going to increase its operational costs The environmental impact on Earth has its own challenges: The environmental impact of launches need to be addressed. Deployment consumes Earth resources that cannot be recovered or recycled. Computers require lots of resources, some of which are strategic. Recycling e-waste is already a challenge on Earth and extremely unlikely in space. Space debris (orbit pollution) is another sustainability challenge for space: Orbits are, like any resources, a limited physical and electromagnetic resource and available for all mankind. The accumulation of satellites on a particular orbit reduces the use of space for other purposes. A consequence of the increase of satellite in orbit is a higher risk of the runaway of space debris (see Kessler syndrome). This means some orbits could become unusable. Latency and bandwidth are constrained in space, and consumes limited electromagnetic resources. Satellite flares could inhibit ground-based and space-based observational astronomy. == Size and power generated == It would take ~1 square mile solar array in earth orbit to produce 1 gigawatt of power at 30% cell efficiency. == Companies pursuing space-based AI infrastructure == Blue Origin Cowboy Space Corporation (formerly Aetherflux) Edge Aerospace Google – Project Suncatcher Nvidia OpenAI SpaceX Starcloud
Read more →
Artificial Inventor Project

The Artificial Inventor Project (AIP) is a global legal initiative headed by Professor Ryan Abbott dedicated to pursuing intellectual property (IP) rights for inventions and creative works generated autonomously by artificial intelligence (AI) systems without traditional human inventorship or authorship. The project coordinates a series of pro bono test cases worldwide, aiming to prompt law reform and public debate on how IP law should accommodate non-human creators. == History == In 2019, AIP filed patent applications in multiple jurisdictions, including the United States, United Kingdom, European Patent Office, Australia, Switzerland, and South Africa, naming the AI system DABUS (Device for the Autonomous Bootstrapping of Unified Sentience), created by Stephen Thaler, as the inventor. The aim was to challenge legal norms that require inventors to be natural persons and highlight pressing policy questions about AI-generated innovation and IP regimes. == Legal proceedings by jurisdiction == === Australia === In July 2021, a Federal Court of Australia judge (Beach J) ruled that AI can be considered an inventor under the Patents Act 1990, ordering IP Australia to reinstate the relevant patent. However, the full court then overturned this ruling on appeal and denied further review. === European Patent Office === The EPO Board of Appeal determined in 2022 that only a human inventor may be named, rendering DABUS‑based applications unacceptable. === South Africa === In 2021, a patent was granted listing DABUS as the inventor. As South Africa’s procedural system does not involve substantive inventorship review, the grant proceeded on formal grounds alone. === Switzerland === On 26 June 2025, the Swiss Federal Administrative Court ruled that artificial intelligence systems such as DABUS cannot be listed as inventors on patent applications. The court upheld the existing practice of the Swiss Federal Institute of Intellectual Property (IPI), affirming that only natural persons may be recognized as inventors under Swiss patent law. === United Kingdom === In December 2023, the UK Supreme Court unanimously held that AI systems cannot be legally recognized as inventors, affirming that "an inventor must be a person" under current British law. === United States === In Thaler v. Hirshfeld (2021), a U.S. federal court agreed with the USPTO that inventors must be natural persons, rejecting the DABUS application and setting a precedent consistent with existing statute and administrative policy. == Criticism and impact == The project has fueled substantial discourse. Critics caution that allowing AI inventorship may complicate notions of accountability and ownership. Proponents argue that legal recognition must evolve to avoid disincentivizing innovation produced by AI and to maintain honesty about the true source of invention.
Read more →
Artificial intelligence in spirituality

Some users of artificial intelligence (AI) technologies, especially chatbots, may develop beliefs that AI has or can attain supernatural or spiritual powers. AI models such as ChatGPT are turned to for fortune telling, mysticism and remote viewing. Recent and sudden advances in large language models have led to folk myths about their origin or capabilities, as well as their deification or worship by some users. Tucker Carlson has made similar claims, including directly to Sam Altman. Pope Leo XIV advised priests against using LLM models when it came to the creation of sermons.
Read more →
Semantic interpretation

Semantic interpretation is an important component in dialog systems. It is related to natural language understanding, but mostly it refers to the last stage of understanding. The goal of interpretation is binding the user utterance to concept, or something the system can understand. Typically it is creating a database query based on user utterance.
Read more →
Structured sparsity regularization

Structured sparsity regularization is a class of methods, and an area of research in statistical learning theory, that extend and generalize sparsity regularization learning methods. Both sparsity and structured sparsity regularization methods seek to exploit the assumption that the output variable Y {\displaystyle Y} (i.e., response, or dependent variable) to be learned can be described by a reduced number of variables in the input space X {\displaystyle X} (i.e., the domain, space of features or explanatory variables). Sparsity regularization methods focus on selecting the input variables that best describe the output. Structured sparsity regularization methods generalize and extend sparsity regularization methods, by allowing for optimal selection over structures like groups or networks of input variables in X {\displaystyle X} . Common motivation for the use of structured sparsity methods are model interpretability, high-dimensional learning (where dimensionality of X {\displaystyle X} may be higher than the number of observations n {\displaystyle n} ), and reduction of computational complexity. Moreover, structured sparsity methods allow to incorporate prior assumptions on the structure of the input variables, such as overlapping groups, non-overlapping groups, and acyclic graphs. Examples of uses of structured sparsity methods include face recognition, magnetic resonance image (MRI) processing, socio-linguistic analysis in natural language processing, and analysis of genetic expression in breast cancer. == Definition and related concepts == === Sparsity regularization === Consider the linear kernel regularized empirical risk minimization problem with a loss function V ( y i , f ( x ) ) {\displaystyle V(y_{i},f(x))} and the ℓ 0 {\displaystyle \ell _{0}} "norm" as the regularization penalty: min w ∈ R d 1 n ∑ i = 1 n V ( y i , ⟨ w , x i ⟩ ) + λ ‖ w ‖ 0 , {\displaystyle \min _{w\in \mathbb {R} ^{d}}{\frac {1}{n}}\sum _{i=1}^{n}V(y_{i},\langle w,x_{i}\rangle )+\lambda \|w\|_{0},} where x , w ∈ R d {\displaystyle x,w\in \mathbb {R^{d}} } , and ‖ w ‖ 0 {\displaystyle \|w\|_{0}} denotes the ℓ 0 {\displaystyle \ell _{0}} "norm", defined as the number of nonzero entries of the vector w {\displaystyle w} . f ( x ) = ⟨ w , x i ⟩ {\displaystyle f(x)=\langle w,x_{i}\rangle } is said to be sparse if ‖ w ‖ 0 = s < d {\displaystyle \|w\|_{0}=s 0 {\displaystyle w_{j}>0} . However, as in this case groups may overlap, we take the intersection of the complements of those groups that are not set to zero. This intersection of complements selection criteria implies the modeling choice that we allow some coefficients within a particular group g {\displaystyle g} to be set to zero, while others within the same group g {\displaystyle g} may remain positive. In other words, coefficients within a group may differ depending on the several group memberships that each variable within the group may have. ==== Union of groups: latent group Lasso ==== A different approach is to consider union of groups for variable selection. This approach captures the modeling situation where variables can be selected as long as they belong at least to one group with positive coefficients. This modeling perspective implies that we want to preserve group structure. The formulation of the union of groups approach is also referred to as latent group Lasso, and requires to modify the group ℓ 2 {\displaystyle \ell _{2}} norm considered above and introduce the following regularizer R ( w ) = i n f { ∑ g ‖ w g ‖ g : w = ∑ g = 1 G w ¯ g } {\displaystyle R(w)=inf\left\{\sum _{g}\|w_{g}\|_{g}:w=\sum _{g=1}^{G}{\bar {w}}_{g}\right\}} where w ∈ R d {\displaystyle w\in {\mathbb {R^{d}} }} , w g ∈ G g {\displaystyle w_{g}\in G_{g}} is the vector of coefficients of group g, and w ¯ g ∈ R d {\displaystyle {\bar {w}}_{g}\in {\mathbb {R^{d}} }} is a vector with coefficients w g j {\displaystyle w_{g}^{j}} for all variables j {
Read more →
Embodied agent

In artificial intelligence, an embodied agent, also sometimes referred to as an interface agent, is an intelligent agent that interacts with the environment through a physical body within that environment. Agents that are represented graphically with a body, for example a human or a cartoon animal, are also called embodied agents, although they have only virtual, not physical, embodiment. A branch of artificial intelligence focuses on empowering such agents to interact autonomously with human beings and the environment. Mobile robots are one example of physically embodied agents; Ananova and Microsoft Agent are examples of graphically embodied agents. Embodied conversational agents are embodied agents (usually with a graphical front-end as opposed to a robotic body) that are capable of engaging in conversation with one another and with humans employing the same verbal and nonverbal means that humans do (such as gesture, facial expression, and so forth). == Embodied conversational agents == Embodied conversational agents are a form of intelligent user interface. Graphically embodied agents aim to unite gesture, facial expression and speech to enable face-to-face communication with users, providing a powerful means of human-computer interaction. == Advantages == Face-to-face communication allows communication protocols that give a much richer communication channel than other means of communicating. It enables pragmatic communication acts such as conversational turn-taking, facial expression of emotions, information structure and emphasis, visualization and iconic gestures, and orientation in a three-dimensional environment. This communication takes place through both verbal and non-verbal channels such as gaze, gesture, spoken intonation and body posture. Research has found that users prefer a non-verbal visual indication of an embodied system's internal state to a verbal indication, demonstrating the value of additional non-verbal communication channels. As well as this, the face-to-face communication involved in interacting with an embodied agent can be conducted alongside another task without distracting the human participants, instead improving the enjoyment of such an interaction. Furthermore, the use of an embodied presentation agent results in improved recall of the presented information. Embodied agents also provide a social dimension to the interaction. Humans willingly ascribe social awareness to computers, and thus interaction with embodied agents follows social conventions, similar to human to human interactions. This social interaction both raises the believably and perceived trustworthiness of agents, and increases the user's engagement with the system. Rickenberg and Reeves found that the presence of an embodied agent on a website increased the level of user trust in that website, but also increased users' anxiety and affected their performance, as if they were being watched by a real human. Another effect of the social aspect of agents is that presentations given by an embodied agent are perceived as being more entertaining and less difficult than similar presentations given without an agent. Research shows that perceived enjoyment, followed by perceived usefulness and ease of use, is the major factor influencing user adoption of embodied agents. A study in January 2004 by Byron Reeves at Stanford demonstrated how digital characters could "enhance online experiences" through explaining how virtual characters essentially add a sense of familiarity to the user experience and make it more approachable. This increase in likability in turn helps make the products better, which benefits both the end users and those creating the product. === Applications === The rich style of communication that characterizes human conversation makes conversational interaction with embodied conversational agents ideal for many non-traditional interaction tasks. A familiar application of graphically embodied agents is computer games; embodied agents are ideal for this setting because the richer communication style makes interacting with the agent enjoyable. Embodied conversational agents have also been used in virtual training environments, portable personal navigation guides, interactive fiction and storytelling systems, interactive online characters and automated presenters and commentators. Major virtual assistants like Siri, Amazon Alexa and Google Assistant do not come with any visual embodied representation, which is believed to limit the sense of human presence by users. The U.S. Department of Defense utilizes a software agent called SGT STAR on U.S. Army-run Web sites and Web applications for site navigation, recruitment and propaganda purposes. Sgt. Star is run by the Army Marketing and Research Group, a division operated directly from The Pentagon. Sgt. Star is based upon the ActiveSentry technology developed by Next IT, a Washington-based information technology services company. Other such bots in the Sgt. Star "family" are utilized by the Federal Bureau of Investigation and the Central Intelligence Agency for intelligence gathering purposes.
Read more →