AI Data Water

AI Data Water — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  IT baseline protection

  The IT baseline protection (German: IT-Grundschutz) approach from the German Federal Office for Information Security (BSI) is a methodology to identify and implement computer security measures in an organization. The aim is the achievement of an adequate and appropriate level of security for IT systems. To reach this goal the BSI recommends "well-proven technical, organizational, personnel, and infrastructural safeguards". Organizations and federal agencies show their systematic approach to secure their IT systems (e.g. Information Security Management System) by obtaining an ISO/IEC 27001 Certificate on the basis of IT-Grundschutz. == Overview baseline security == The term baseline security signifies standard security measures for typical IT systems. It is used in various contexts with somewhat different meanings. For example: Microsoft Baseline Security Analyzer: Software tool focused on Microsoft operating system and services security Cisco security baseline: Vendor recommendation focused on network and network device security controls Nortel baseline security: Set of requirements and best practices with a focus on network operators ISO/IEC 13335-3 defines a baseline approach to risk management. This standard has been replaced by ISO/IEC 27005, but the baseline approach was not taken over yet into the 2700x series. There are numerous internal baseline security policies for organizations, The German BSI has a comprehensive baseline security standard, that is compliant with the ISO/IEC 27000-series == BSI IT baseline protection == The foundation of an IT baseline protection concept is initially not a detailed risk analysis. It proceeds from overall hazards. Consequently, sophisticated classification according to damage extent and probability of occurrence is ignored. Three protection needs categories are established. With their help, the protection needs of the object under investigation can be determined. Based on these, appropriate personnel, technical, organizational and infrastructural security measures are selected from the IT Baseline Protection Catalogs. The Federal Office for Security in Information Technology's IT Baseline Protection Catalogs offer a "cookbook recipe" for a normal level of protection. Besides probability of occurrence and potential damage extents, implementation costs are also considered. By using the Baseline Protection Catalogs, costly security analyses requiring expert knowledge are dispensed with, since overall hazards are worked with in the beginning. It is possible for the relative layman to identify measures to be taken and to implement them in cooperation with professionals. The BSI grants a baseline protection certificate as confirmation for the successful implementation of baseline protection. In stages 1 and 2, this is based on self declaration. In stage 3, an independent, BSI-licensed auditor completes an audit. Certification process internationalization has been possible since 2006. ISO/IEC 27001 certification can occur simultaneously with IT baseline protection certification. (The ISO/IEC 27001 standard is the successor of BS 7799-2). This process is based on the new BSI security standards. This process carries a development price which has prevailed for some time. Corporations having themselves certified under the BS 7799-2 standard are obliged to carry out a risk assessment. To make it more comfortable, most deviate from the protection needs analysis pursuant to the IT Baseline Protection Catalogs. The advantage is not only conformity with the strict BSI, but also attainment of BS 7799-2 certification. Beyond this, the BSI offers a few help aids like the policy template and the GSTOOL. One data protection component is available, which was produced in cooperation with the German Federal Commissioner for Data Protection and Freedom of Information and the state data protection authorities and integrated into the IT Baseline Protection Catalog. This component is not considered, however, in the certification process. == Baseline protection process == The following steps are taken pursuant to the baseline protection process during structure analysis and protection needs analysis: The IT network is defined. IT structure analysis is carried out. Protection needs determination is carried out. A baseline security check is carried out. IT baseline protection measures are implemented. Creation occurs in the following steps: IT structure analysis (survey) Assessment of protection needs Selection of actions Running comparison of nominal and actual. === IT structure analysis === An IT network includes the totality of infrastructural, organizational, personnel, and technical components serving the fulfillment of a task in a particular information processing application area. An IT network can thereby encompass the entire IT character of an institution or individual division, which is partitioned by organizational structures as, for example, a departmental network, or as shared IT applications, for example, a personnel information system. It is necessary to analyze and document the information technological structure in question to generate an IT security concept and especially to apply the IT Baseline Protection Catalogs. Due to today's usually heavily networked IT systems, a network topology plan offers a starting point for the analysis. The following aspects must be taken into consideration: The available infrastructure, The organizational and personnel framework for the IT network, Networked and non-networked IT systems employed in the IT network. The communications connections between IT systems and externally, IT applications run within the IT network. === Protection needs determination === The purpose of the protection needs determination is to investigate what protection is sufficient and appropriate for the information and information technology in use. In this connection, the damage to each application and the processed information, which could result from a breach of confidentiality, integrity or availability, is considered. Important in this context is a realistic assessment of the possible follow-on damages. A division into the three protection needs categories "low to medium", "high" and "very high" has proved itself of value. "Public", "internal" and "secret" are often used for confidentiality. === Modelling === Heavily networked IT systems typically characterize information technology in government and business these days. As a rule, therefore, it is advantageous to consider the entire IT system and not just individual systems within the scope of an IT security analysis and concept. To be able to manage this task, it makes sense to logically partition the entire IT system into parts and to separately consider each part or even an IT network. Detailed documentation about its structure is prerequisite for the use of the IT Baseline Protection Catalogs on an IT network. This can be achieved, for example, via the IT structure analysis described above. The IT Baseline Protection Catalog’s' components must ultimately be mapped onto the components of the IT network in question in a modelling step. === Baseline security check === The baseline security check is an organisational instrument offering a quick overview of the prevailing IT security level. With the help of interviews, the status quo of an existing IT network (as modelled by IT baseline protection) relative to the number of security measures implemented from the IT Baseline Protection Catalogs are investigated. The result is a catalog in which the implementation status "dispensable", "yes", "partly", or "no" is entered for each relevant measure. By identifying not yet, or only partially, implemented measures, improvement options for the security of the information technology in question are highlighted. The baseline security check gives information about measures, which are still missing (nominal vs. actual comparison). From this follows what remains to be done to achieve baseline protection through security. Not all measures suggested by this baseline check need to be implemented. Peculiarities are to be taken into account! It could be that several more or less unimportant applications are running on a server, which have lesser protection needs. In their totality, however, these applications are to be provided with a higher level of protection. This is called the (cumulation effect). The applications running on a server determine its need for protection. Several IT applications can run on an IT system. When this occurs, the application with the greatest need for protection determines the IT system’s protection category. Conversely, it is conceivable that an IT application with great protection needs does not automatically transfer this to the IT system. This may happen because the IT system is configured redundantly, or because only an inconsequential part is running on it. This is called the (distribution effect). This is the case, fo

  Read more →
• 

  Prototype methods

  Prototype methods are machine learning methods that use data prototypes. A data prototype is a data value that reflects other values in its class, e.g., the centroid in a K-means clustering problem. == Methods == The following are some prototype methods K-means clustering Learning vector quantization (LVQ) Gaussian mixtures == Related Methods == While K-nearest neighbor's does not use prototypes, it is similar to prototype methods like K-means clustering.

  Read more →
• 

  Junction tree algorithm

  The junction tree algorithm (also known as 'Clique Tree') is a method used in machine learning to extract marginalization in general graphs. In essence, it entails performing belief propagation on a modified graph called a junction tree. The graph is called a tree because it branches into different sections of data; nodes of variables are the branches. The basic premise is to eliminate cycles by clustering them into single nodes. Multiple extensive classes of queries can be compiled at the same time into larger structures of data. There are different algorithms to meet specific needs and for what needs to be calculated. Inference algorithms gather new developments in the data and calculate it based on the new information provided. == Junction tree algorithm == === Hugin algorithm === If the graph is directed then moralize it to make it un-directed. Introduce the evidence. Triangulate the graph to make it chordal. Construct a junction tree from the triangulated graph (we will call the vertices of the junction tree "supernodes"). Propagate the probabilities along the junction tree (via belief propagation) Note that this last step is inefficient for graphs of large treewidth. Computing the messages to pass between supernodes involves doing exact marginalization over the variables in both supernodes. Performing this algorithm for a graph with treewidth k will thus have at least one computation which takes time exponential in k. It is a message passing algorithm. The Hugin algorithm takes fewer computations to find a solution compared to Shafer-Shenoy. === Shafer-Shenoy algorithm === Computed recursively Multiple recursions of the Shafer-Shenoy algorithm results in Hugin algorithm Found by the message passing equation Separator potentials are not stored The Shafer-Shenoy algorithm is the sum product of a junction tree. It is used because it runs programs and queries more efficiently than the Hugin algorithm. The algorithm makes calculations for conditionals for belief functions possible. Joint distributions are needed to make local computations happen. === Underlying theory === The first step concerns only Bayesian networks, and is a procedure to turn a directed graph into an undirected one. We do this because it allows for the universal applicability of the algorithm, regardless of direction. The second step is setting variables to their observed value. This is usually needed when we want to calculate conditional probabilities, so we fix the value of the random variables we condition on. Those variables are also said to be clamped to their particular value. The third step is to ensure that graphs are made chordal if they aren't already chordal. This is the first essential step of the algorithm. It makes use of the following theorem: Theorem: For an undirected graph, G, the following properties are equivalent: Graph G is triangulated. The clique graph of G has a junction tree. There is an elimination ordering for G that does not lead to any added edges. Thus, by triangulating a graph, we make sure that the corresponding junction tree exists. A usual way to do this, is to decide an elimination order for its nodes, and then run the Variable elimination algorithm. The variable elimination algorithm states that the algorithm must be run each time there is a different query. This will result to adding more edges to the initial graph, in such a way that the output will be a chordal graph. All chordal graphs have a junction tree. The next step is to construct the junction tree. To do so, we use the graph from the previous step, and form its corresponding clique graph. Now the next theorem gives us a way to find a junction tree: Theorem: Given a triangulated graph, weight the edges of the clique graph by their cardinality, |A∩B|, of the intersection of the adjacent cliques A and B. Then any maximum-weight spanning tree of the clique graph is a junction tree. So, to construct a junction tree we just have to extract a maximum weight spanning tree out of the clique graph. This can be efficiently done by, for example, modifying Kruskal's algorithm. The last step is to apply belief propagation to the obtained junction tree. Usage: A junction tree graph is used to visualize the probabilities of the problem. The tree can become a binary tree to form the actual building of the tree. A specific use could be found in auto encoders, which combine the graph and a passing network on a large scale automatically. === Inference Algorithms === Loopy belief propagation: A different method of interpreting complex graphs. The loopy belief propagation is used when an approximate solution is needed instead of the exact solution. It is an approximate inference. Cutset conditioning: Used with smaller sets of variables. Cutset conditioning allows for simpler graphs that are easier to read but are not exact.

  Read more →
• 

  Stochastic variance reduction

  (Stochastic) variance reduction is an algorithmic approach to minimizing functions that can be decomposed into finite sums. By exploiting the finite sum structure, variance reduction techniques are able to achieve convergence rates that are impossible to achieve with methods that treat the objective as an infinite sum, as in the classical Stochastic approximation setting. Variance reduction approaches are widely used for training machine learning models such as logistic regression and support vector machines as these problems have finite-sum structure and uniform conditioning that make them ideal candidates for variance reduction. == Finite sum objectives == A function f {\displaystyle f} is considered to have finite sum structure if it can be decomposed into a summation or average: f ( x ) = 1 n ∑ i = 1 n f i ( x ) , {\displaystyle f(x)={\frac {1}{n}}\sum _{i=1}^{n}f_{i}(x),} where the function value and derivative of each f i {\displaystyle f_{i}} can be queried independently. Although variance reduction methods can be applied for any positive n {\displaystyle n} and any f i {\displaystyle f_{i}} structure, their favorable theoretical and practical properties arise when n {\displaystyle n} is large compared to the condition number of each f i {\displaystyle f_{i}} , and when the f i {\displaystyle f_{i}} have similar (but not necessarily identical) Lipschitz smoothness and strong convexity constants. The finite sum structure should be contrasted with the stochastic approximation setting which deals with functions of the form f ( θ ) = E ξ ⁡ [ F ( θ , ξ ) ] {\textstyle f(\theta )=\operatorname {E} _{\xi }[F(\theta ,\xi )]} which is the expected value of a function depending on a random variable ξ {\textstyle \xi } . Any finite sum problem can be optimized using a stochastic approximation algorithm by using F ( ⋅ , ξ ) = f ξ {\displaystyle F(\cdot ,\xi )=f_{\xi }} . == Rapid Convergence == Stochastic variance reduced methods without acceleration are able to find a minima of f {\displaystyle f} within accuracy ϵ > {\displaystyle \epsilon >} , i.e. f ( x ) − f ( x ∗ ) ≤ ϵ {\displaystyle f(x)-f(x_{})\leq \epsilon } in a number of steps of the order: O ( ( L μ + n ) log ⁡ ( 1 ϵ ) ) . {\displaystyle O\left(\left({\frac {L}{\mu }}+n\right)\log \left({\frac {1}{\epsilon }}\right)\right).} The number of steps depends only logarithmically on the level of accuracy required, in contrast to the stochastic approximation framework, where the number of steps O ( L / ( μ ϵ ) ) {\displaystyle O{\bigl (}L/(\mu \epsilon ){\bigr )}} required grows proportionally to the accuracy required. Stochastic variance reduction methods converge almost as fast as the gradient descent method's O ( ( L / μ ) log ⁡ ( 1 / ϵ ) ) {\displaystyle O{\bigl (}(L/\mu )\log(1/\epsilon ){\bigr )}} rate, despite using only a stochastic gradient, at a 1 / n {\displaystyle 1/n} lower cost than gradient descent. Accelerated methods in the stochastic variance reduction framework achieve even faster convergence rates, requiring only O ( ( n L μ + n ) log ⁡ ( 1 ϵ ) ) {\displaystyle O\left(\left({\sqrt {\frac {nL}{\mu }}}+n\right)\log \left({\frac {1}{\epsilon }}\right)\right)} steps to reach ϵ {\displaystyle \epsilon } accuracy, potentially n {\displaystyle {\sqrt {n}}} faster than non-accelerated methods. Lower complexity bounds. for the finite sum class establish that this rate is the fastest possible for smooth strongly convex problems. == Approaches == Variance reduction approaches fall within four main categories: table averaging methods, full-gradient snapshot methods, recursive estimator methods (e.g., SARAH), and dual methods. Each category contains methods designed for dealing with convex, non-smooth, and non-convex problems, each differing in hyper-parameter settings and other algorithmic details. === SAGA === In the SAGA method, the prototypical table averaging approach, a table of size n {\displaystyle n} is maintained that contains the last gradient witnessed for each f i {\displaystyle f_{i}} term, which we denote g i {\displaystyle g_{i}} . At each step, an index i {\displaystyle i} is sampled, and a new gradient ∇ f i ( x k ) {\displaystyle \nabla f_{i}(x_{k})} is computed. The iterate x k {\displaystyle x_{k}} is updated with: x k + 1 = x k − γ [ ∇ f i ( x k ) − g i + 1 n ∑ i = 1 n g i ] , {\displaystyle x_{k+1}=x_{k}-\gamma \left[\nabla f_{i}(x_{k})-g_{i}+{\frac {1}{n}}\sum _{i=1}^{n}g_{i}\right],} and afterwards table entry i {\displaystyle i} is updated with g i = ∇ f i ( x k ) {\displaystyle g_{i}=\nabla f_{i}(x_{k})} . SAGA is among the most popular of the variance reduction methods due to its simplicity, easily adaptable theory, and excellent performance. It is the successor of the SAG method, improving on its flexibility and performance. === SVRG === The stochastic variance reduced gradient method (SVRG), the prototypical snapshot method, uses a similar update except instead of using the average of a table it instead uses a full-gradient that is reevaluated at a snapshot point x ~ {\displaystyle {\tilde {x}}} at regular intervals of m ≥ n {\displaystyle m\geq n} iterations. The update becomes: x k + 1 = x k − γ [ ∇ f i ( x k ) − ∇ f i ( x ~ ) + ∇ f ( x ~ ) ] , {\displaystyle x_{k+1}=x_{k}-\gamma [\nabla f_{i}(x_{k})-\nabla f_{i}({\tilde {x}})+\nabla f({\tilde {x}})],} This approach requires two stochastic gradient evaluations per step, one to compute ∇ f i ( x k ) {\displaystyle \nabla f_{i}(x_{k})} and one to compute ∇ f i ( x ~ ) , {\displaystyle \nabla f_{i}({\tilde {x}}),} where-as table averaging approaches need only one. Despite the high computational cost, SVRG is popular as its simple convergence theory is highly adaptable to new optimization settings. It also has lower storage requirements than tabular averaging approaches, which make it applicable in many settings where tabular methods can not be used. === SARAH === The SARAH (stochastic recursive gradient) method maintains a recursive estimator of the gradient rather than storing a table of past gradients (as in SAGA) or computing periodic full-gradient snapshots (as in SVRG). At the start of an inner loop, a full gradient is computed at a reference point x ~ {\displaystyle {\tilde {x}}} : v 0 = ∇ f ( x ~ ) {\displaystyle v_{0}=\nabla f({\tilde {x}})} . For inner iterations, with a sampled index i k {\displaystyle i_{k}} , the gradient estimator and iterate are updated by: v k = ∇ f i k ( x k ) − ∇ f i k ( x k − 1 ) + v k − 1 , x k + 1 = x k − γ v k . {\displaystyle v_{k}=\nabla f_{i_{k}}(x_{k})-\nabla f_{i_{k}}(x_{k-1})+v_{k-1},\qquad x_{k+1}=x_{k}-\gamma v_{k}.} This recursion requires two component-gradient evaluations per step ∇ f i k ( x k ) {\displaystyle \nabla f_{i_{k}}(x_{k})} and ∇ f i k ( x k − 1 ) {\displaystyle \nabla f_{i_{k}}(x_{k-1})} but does not need to store per-sample gradients, resulting in lower memory cost than table-averaging methods. SARAH admits linear convergence for strongly convex functions and has been extended to more general nonconvex and composite problems. === SDCA === Exploiting the dual representation of the objective leads to another variance reduction approach that is particularly suited to finite-sums where each term has a structure that makes computing the convex conjugate f i ∗ , {\displaystyle f_{i}^{},} or its proximal operator tractable. The standard SDCA method considers finite sums that have additional structure compared to generic finite sum setting: f ( x ) = 1 n ∑ i = 1 n f i ( x T v i ) + λ 2 ‖ x ‖ 2 , {\displaystyle f(x)={\frac {1}{n}}\sum _{i=1}^{n}f_{i}(x^{T}v_{i})+{\frac {\lambda }{2}}\|x\|^{2},} where each f i {\displaystyle f_{i}} is 1 dimensional and each v i {\displaystyle v_{i}} is a data point associated with f i {\displaystyle f_{i}} . SDCA solves the dual problem: max α ∈ R n − 1 n ∑ i = 1 n f i ∗ ( − α i ) − λ 2 ‖ 1 λ n ∑ i = 1 n α i v i ‖ 2 , {\displaystyle \max _{\alpha \in \mathbb {R} ^{n}}-{\frac {1}{n}}\sum _{i=1}^{n}f_{i}^{}(-\alpha _{i})-{\frac {\lambda }{2}}\left\|{\frac {1}{\lambda n}}\sum _{i=1}^{n}\alpha _{i}v_{i}\right\|^{2},} by a stochastic coordinate ascent procedure, where at each step the objective is optimized with respect to a randomly chosen coordinate α i {\displaystyle \alpha _{i}} , leaving all other coordinates the same. An approximate primal solution x {\displaystyle x} can be recovered from the α {\displaystyle \alpha } values: x = 1 λ n ∑ i = 1 n α i v i {\displaystyle x={\frac {1}{\lambda n}}\sum _{i=1}^{n}\alpha _{i}v_{i}} . This method obtains similar theoretical rates of convergence to other stochastic variance reduced methods, while avoiding the need to specify a step-size parameter. It is fast in practice when λ {\displaystyle \lambda } is large, but significantly slower than the other approaches when λ {\displaystyle \lambda } is small. == Accelerated approaches == Accelerated variance reduction methods are built upon the standard methods above. The earliest approaches make use of proximal operators t

  Read more →
• 

  Galaksija BASIC

  Galaksija BASIC was the BASIC interpreter of the Galaksija build-it-yourself home computer from Yugoslavia. While being partially based on code taken from TRS-80 Level 1 BASIC, which the creator believed to have been a Microsoft BASIC, the extensive modifications of Galaksija BASIC—such as to include rudimentary array support, video generation code (as the CPU itself did it in absence of dedicated video circuitry) and generally improvements to the programming language—is said to have left not much more than flow-control and floating point code remaining from the original. The core implementation of the interpreter was fully contained in the 4 KiB ROM "A" or "1". The computer's original mainboard had a reserved slot for an extension ROM "B" or "2" that added more commands and features such as a built-in Zilog Z80 assembler. == ROM "A"/"1" symbols and keywords == The core implementation, in ROM "A" or "1", contained 3 special symbols and 32 keywords: ! begins a comment (equivalent of standard BASIC REM command) # Equivalent of standard BASIC DATA statement & prefix for hex numbers ARR$(n) Allocates an array of strings, like DIM, but can allocate only array with name A$ BYTE serves as PEEK when used as a function (e.g. PRINT BYTE(11123)) and POKE when used as a command (e.g. BYTE 11123,123). CALL n Calls BASIC subroutine as GOSUB in most other BASICs (e.g. CALL 100+4X) CHR$(n) converts an ASCII numeric code into a corresponding character (string) DOT x, y draws (command) or inspects (function) a pixel at given coordinates (0<=x<=63, 0<=y<=47). DOT displays the clock or time controlled by content of Y$ variable. Not in standard ROM EDIT n causes specified program line to be edited ELSE standard part of IF-ELSE construct (Galaksija did not use THEN) EQ compare alphanumeric values X$ and Y$ FOR standard FOR loop GOTO standard GOTO command HOME equivalent of standard BASIC CLS command - clears the screen HOME n protects n characters from the top of the screen from being scrolled away IF standard part of IF-ELSE construct (Galaksija did not use THEN) INPUT user entry of variable INT(n) a function that returns the greatest integer value equal to or lesser than n KEY(n) test whether a particular keyboard key is pressed LIST lists the program. Optional numeric argument specifies the first line number to begin listing with. MEM returns memory consumption data (need details here) NEW clears the current BASIC program NEW n clears BASIC program and moves beginning of BASIC area NEXT standard terminator of FOR loop OLD loads a program from tape OLD n loads program to different address PTR Returns address of the variable PRINT Printing numeric or string expression. RETURN Return from BASIC subroutine RND function (takes no arguments) that returns a random number between 0 and 1. RUN runs (executes) BASIC program. Optional numeric argument specifies the line number to begin execution with. SAVE saves a program to tape. Optional two arguments specify memory range to be saved (need details here). STEP standard part of FOR loop STOP stops execution of BASIC program TAKE replacement for READ and RESTORE. If the parameter is variable name, acts as READ, if it is number, acts as RESTORE UNDOT x, y "undraws" (resets) at specified coordinates (see DOT) UNDOT Stops the clock, not part of ROM USR Calls machine code subroutine WORD Double byte PEEK and POKE == ROM "B"/"2" additional symbols and keywords == The extended BASIC features, in ROM "B" or "2", contained one extra reserved symbol and 22 extra keywords: % /LABEL ABS(x) ARCTG(x) COS(x) COSD(x) DEL DUMP EXP(x) INP(x) LDUMP LLIST LN(x) LPRINT OUT PI POW(x,y) REN SIN(x), SIND(x) SQR(x) TG(x) TGD(x)

  Read more →
• 

  Iris flower data set

  The Iris flower data set or Fisher's Iris data set is a multivariate data set used and made famous by the British statistician and biologist Ronald Fisher in his 1936 paper The use of multiple measurements in taxonomic problems as an example of linear discriminant analysis. It is sometimes called Anderson's Iris data set because Edgar Anderson collected the data to quantify the morphologic variation of Iris flowers of three related species. Two of the three species were collected in the Gaspé Peninsula "all from the same pasture, and picked on the same day and measured at the same time by the same person with the same apparatus". The data set consists of 50 samples from each of three species of Iris (Iris setosa, Iris virginica and Iris versicolor). Four features were measured from each sample: the length and the width of the sepals and petals, in centimeters. Based on the combination of these four features, Fisher developed a linear discriminant model to distinguish each species. Fisher's paper was published in the Annals of Eugenics (today the Annals of Human Genetics). == Use of the data set == Originally used as an example data set on which Fisher's linear discriminant analysis was applied, it became a typical test case for many statistical classification techniques in machine learning such as support vector machines. The use of this data set in cluster analysis however is not common, since the data set only contains two clusters with rather obvious separation. One of the clusters contains Iris setosa, while the other cluster contains both Iris virginica and Iris versicolor and is not separable without the species information Fisher used. This makes the data set a good example to explain the difference between supervised and unsupervised techniques in data mining: Fisher's linear discriminant model can only be obtained when the object species are known: class labels and clusters are not necessarily the same. Nevertheless, all three species of Iris are separable in the projection on the nonlinear and branching principal component. The data set is approximated by the closest tree with some penalty for the excessive number of nodes, bending and stretching. Then the so-called "metro map" is constructed. The data points are projected into the closest node. For each node the pie diagram of the projected points is prepared. The area of the pie is proportional to the number of the projected points. It is clear from the diagram (left) that the absolute majority of the samples of the different Iris species belong to the different nodes. Only a small fraction of Iris-virginica is mixed with Iris-versicolor (the mixed blue-green nodes in the diagram). Therefore, the three species of Iris (Iris setosa, Iris virginica and Iris versicolor) are separable by the unsupervising procedures of nonlinear principal component analysis. To discriminate them, it is sufficient just to select the corresponding nodes on the principal tree. == Data set == The data set contains a set of 150 records under five attributes: sepal length, sepal width, petal length, petal width and species. The iris data set is widely used as a beginner's data set for machine learning purposes. The data set is included in R base and Python in the machine learning library scikit-learn, so that users can access it without having to find a source for it. Several versions of the data set have been published. === R code illustrating usage === The example R code shown below reproduce the scatterplot displayed at the top of this article: === Python code illustrating usage === This code gives:

  Read more →
• 

  Mutation (evolutionary algorithm)

  Mutation is a genetic operator used to maintain genetic diversity of the chromosomes of a population of an evolutionary algorithm (EA), including genetic algorithms in particular. It is analogous to biological mutation. The classic example of a mutation operator of a binary coded genetic algorithm (GA) involves a probability that an arbitrary bit in a genetic sequence will be flipped from its original state. A common method of implementing the mutation operator involves generating a random variable for each bit in a sequence. This random variable tells whether or not a particular bit will be flipped. This mutation procedure, based on the biological point mutation, is called single point mutation. Other types of mutation operators are commonly used for representations other than binary, such as floating-point encodings or representations for combinatorial problems. The purpose of mutation in EAs is to introduce diversity into the sampled population. Mutation operators are used in an attempt to avoid local minima by preventing the population of chromosomes from becoming too similar to each other, thus slowing or even stopping convergence to the global optimum. This reasoning also leads most EAs to avoid only taking the fittest of the population in generating the next generation, but rather selecting a random (or semi-random) set with a weighting toward those that are fitter. The following requirements apply to all mutation operators used in an EA: every point in the search space must be reachable by one or more mutations. there must be no preference for parts or directions in the search space (no drift). small mutations should be more probable than large ones. For different genome types, different mutation types are suitable. Some mutations are Gaussian, Uniform, Zigzag, Scramble, Insertion, Inversion, Swap, and so on. An overview and more operators than those presented below can be found in the introductory book by Eiben and Smith or in. == Bit string mutation == The mutation of bit strings ensue through bit flips at random positions. Example: The probability of a mutation of a bit is 1 l {\displaystyle {\frac {1}{l}}} , where l {\displaystyle l} is the length of the binary vector. Thus, a mutation rate of 1 {\displaystyle 1} per mutation and individual selected for mutation is reached. == Mutation of real numbers == Many EAs, such as the evolution strategy or the real-coded genetic algorithms, work with real numbers instead of bit strings. This is due to the good experiences that have been made with this type of coding. The value of a real-valued gene can either be changed or redetermined. A mutation that implements the latter should only ever be used in conjunction with the value-changing mutations and then only with comparatively low probability, as it can lead to large changes. In practical applications, the respective value range of the decision variables to be changed of the optimisation problem to be solved is usually limited. Accordingly, the values of the associated genes are each restricted to an interval [ x min , x max ] {\displaystyle [x_{\min },x_{\max }]} . Mutations may or may not take these restrictions into account. In the latter case, suitable post-treatment is then required as described below. === Mutation without consideration of restrictions === A real number x {\displaystyle x} can be mutated using normal distribution N ( 0 , σ ) {\displaystyle {\mathcal {N}}(0,\sigma )} by adding the generated random value to the old value of the gene, resulting in the mutated value x ′ {\displaystyle x'} : x ′ = x + N ( 0 , σ ) {\displaystyle x'=x+{\mathcal {N}}(0,\sigma )} In the case of genes with a restricted range of values, it is a good idea to choose the step size of the mutation σ {\displaystyle \sigma } so that it reasonably fits the range [ x min , x max ] {\displaystyle [x_{\min },x_{\max }]} of the gene to be changed, e.g.: σ = x max − x min 6 {\displaystyle \sigma ={\frac {x_{\text{max}}-x_{\text{min}}}{6}}} The step size can also be adjusted to the smaller permissible change range depending on the current value. In any case, however, it is likely that the new value x ′ {\displaystyle x'} of the gene will be outside the permissible range of values. Such a case must be considered a lethal mutation, since the obvious repair by using the respective violated limit as the new value of the gene would lead to a drift. This is because the limit value would then be selected with the entire probability of the values beyond the limit of the value range. The evolution strategy works with real numbers and mutation based on normal distribution. The step sizes are part of the chromosome and are subject to evolution together with the actual decision variables. === Mutation with consideration of restrictions === One possible form of changing the value of a gene while taking its value range [ x min , x max ] {\displaystyle [x_{\min },x_{\max }]} into account is the mutation relative parameter change of the evolutionary algorithm GLEAM (General Learning Evolutionary Algorithm and Method), in which, as with the mutation presented earlier, small changes are more likely than large ones. First, an equally distributed decision is made as to whether the current value x {\displaystyle x} should be increased or decreased and then the corresponding total change interval is determined. Without loss of generality, an increase is assumed for the explanation and the total change interval is then [ x , x max ] {\displaystyle [x,x_{\max }]} . It is divided into k {\displaystyle k} sub-areas of equal size with the width δ {\displaystyle \delta } , from which k {\displaystyle k} sub-change intervals of different size are formed: i {\displaystyle i} -th sub-change interval: [ x , x + δ ⋅ i ] {\displaystyle [x,x+\delta \cdot i]} with δ = ( x max − x ) k {\displaystyle \delta ={\frac {(x_{\text{max}}-x)}{k}}} and i = 1 , … , k {\displaystyle i=1,\dots ,k} Subsequently, one of the k {\displaystyle k} sub-change intervals is selected in equal distribution and a random number, also equally distributed, is drawn from it as the new value x ′ {\displaystyle x'} of the gene. The resulting summed probabilities of the sub-change intervals result in the probability distribution of the k {\displaystyle k} sub-areas shown in the adjacent figure for the exemplary case of k = 10 {\displaystyle k=10} . This is not a normal distribution as before, but this distribution also clearly favours small changes over larger ones. This mutation for larger values of k {\displaystyle k} , such as 10, is less well suited for tasks where the optimum lies on one of the value range boundaries. This can be remedied by significantly reducing k {\displaystyle k} when a gene value approaches its limits very closely. === Common properties === For both mutation operators for real-valued numbers, the probability of an increase and decrease is independent of the current value and is 50% in each case. In addition, small changes are considerably more likely than large ones. For mixed-integer optimization problems, rounding is usually used. == Mutation of permutations == Mutations of permutations are specially designed for genomes that are themselves permutations of a set. These are often used to solve combinatorial tasks. In the two mutations presented, parts of the genome are rotated or inverted. === Rotation to the right === The presentation of the procedure is illustrated by an example on the right: === Inversion === The presentation of the procedure is illustrated by an example on the right: === Variants with preference for smaller changes === The requirement raised at the beginning for mutations, according to which small changes should be more probable than large ones, is only inadequately fulfilled by the two permutation mutations presented, since the lengths of the partial lists and the number of shift positions are determined in an equally distributed manner. However, the longer the partial list and the shift, the greater the change in gene order. This can be remedied by the following modifications. The end index j {\displaystyle j} of the partial lists is determined as the distance d {\displaystyle d} to the start index i {\displaystyle i} : j = ( i + d ) mod | P 0 | {\displaystyle j=(i+d){\bmod {\left|P_{0}\right|}}} where d {\displaystyle d} is determined randomly according to one of the two procedures for the mutation of real numbers from the interval [ 0 , | P 0 | − 1 ] {\displaystyle \left[0,\left|P_{0}\right|-1\right]} and rounded. For the rotation, k {\displaystyle k} is determined similarly to the distance d {\displaystyle d} , but the value 0 {\displaystyle 0} is forbidden. For the inversion, note that i ≠ j {\displaystyle i\neq j} must hold, so for d {\displaystyle d} the value 0 {\displaystyle 0} must be excluded.

  Read more →
• 

  Oja's rule

  Oja's learning rule, or simply Oja's rule, named after Finnish computer scientist Erkki Oja (Finnish pronunciation: [ˈojɑ], AW-yuh), is a model of how neurons in the brain or in artificial neural networks change connection strength, or learn, over time. It is a modification of the standard Hebb's Rule that, through multiplicative normalization, solves all stability problems and generates an algorithm for principal components analysis. This is a computational form of an effect which is believed to happen in biological neurons. == Theory == Oja's rule requires a number of simplifications to derive, but in its final form it is demonstrably stable, unlike Hebb's rule. It is a single-neuron special case of the Generalized Hebbian Algorithm. However, Oja's rule can also be generalized in other ways to varying degrees of stability and success. === Formula === Consider a simplified model of a neuron y {\displaystyle y} that returns a linear combination of its inputs x using presynaptic weights w: y ( x ) = ∑ j = 1 m x j w j {\displaystyle \,y(\mathbf {x} )~=~\sum _{j=1}^{m}x_{j}w_{j}} Oja's rule defines the change in presynaptic weights w given the output response y {\displaystyle y} of a neuron to its inputs x to be Δ w = w n + 1 − w n = η y n ( x n − y n w n ) , {\displaystyle \,\Delta \mathbf {w} ~=~\mathbf {w} _{n+1}-\mathbf {w} _{n}~=~\eta \,y_{n}(\mathbf {x} _{n}-y_{n}\mathbf {w} _{n}),} where η is the learning rate which can also change with time. Note that the bold symbols are vectors and n defines a discrete time iteration. The rule can also be made for continuous iterations as d w d t = η y ( t ) ( x ( t ) − y ( t ) w ( t ) ) . {\displaystyle \,{\frac {d\mathbf {w} }{dt}}~=~\eta \,y(t)(\mathbf {x} (t)-y(t)\mathbf {w} (t)).} === Derivation === The simplest learning rule known is Hebb's rule, which states in conceptual terms that neurons that fire together, wire together. In component form as a difference equation, it is written Δ w = η y ( x n ) x n {\displaystyle \,\Delta \mathbf {w} ~=~\eta \,y(\mathbf {x} _{n})\mathbf {x} _{n}} , or in scalar form with implicit n-dependence, w i ( n + 1 ) = w i ( n ) + η y ( x ) x i {\displaystyle \,w_{i}(n+1)~=~w_{i}(n)+\eta \,y(\mathbf {x} )x_{i}} , where y(xn) is again the output, this time explicitly dependent on its input vector x. Hebb's rule has synaptic weights approaching infinity with a positive learning rate. We can stop this by normalizing the weights so that each weight's magnitude is restricted between 0, corresponding to no weight, and 1, corresponding to being the only input neuron with any weight. We do this by normalizing the weight vector to be of length one: w i ( n + 1 ) = w i ( n ) + η y ( x ) x i ( ∑ j = 1 m [ w j ( n ) + η y ( x ) x j ] p ) 1 / p {\displaystyle \,w_{i}(n+1)~=~{\frac {w_{i}(n)+\eta \,y(\mathbf {x} )x_{i}}{\left(\sum _{j=1}^{m}[w_{j}(n)+\eta \,y(\mathbf {x} )x_{j}]^{p}\right)^{1/p}}}} . Note that in Oja's original paper, p=2, corresponding to quadrature (root sum of squares), which is the familiar Cartesian normalization rule. However, any type of normalization, even linear, will give the same result without loss of generality. For a small learning rate | η | ≪ 1 {\displaystyle |\eta |\ll 1} the equation can be expanded as a Power series in η {\displaystyle \eta } . w i ( n + 1 ) = w i ( n ) ( ∑ j w j p ( n ) ) 1 / p + η ( y x i ( ∑ j w j p ( n ) ) 1 / p − w i ( n ) ∑ j y x j w j p − 1 ( n ) ( ∑ j w j p ( n ) ) ( 1 + 1 / p ) ) + O ( η 2 ) {\displaystyle \,w_{i}(n+1)~=~{\frac {w_{i}(n)}{\left(\sum _{j}w_{j}^{p}(n)\right)^{1/p}}}~+~\eta \left({\frac {yx_{i}}{\left(\sum _{j}w_{j}^{p}(n)\right)^{1/p}}}-{\frac {w_{i}(n)\sum _{j}yx_{j}w_{j}^{p-1}(n)}{\left(\sum _{j}w_{j}^{p}(n)\right)^{(1+1/p)}}}\right)~+~O(\eta ^{2})} . For small η, our higher-order terms O(η2) go to zero. We again make the specification of a linear neuron, that is, the output of the neuron is equal to the sum of the product of each input and its synaptic weight to the power of p-1, which in the case of p=2 is synaptic weight itself, or y ( x ) = ∑ j = 1 m x j w j p − 1 {\displaystyle \,y(\mathbf {x} )~=~\sum _{j=1}^{m}x_{j}w_{j}^{p-1}} . We also specify that our weights normalize to 1, which will be a necessary condition for stability, so | w | = ( ∑ j = 1 m w j p ) 1 / p = 1 {\displaystyle \,|\mathbf {w} |~=~\left(\sum _{j=1}^{m}w_{j}^{p}\right)^{1/p}~=~1} , which, when substituted into our expansion, gives Oja's rule, or w i ( n + 1 ) = w i ( n ) + η y ( x i − w i ( n ) y ) {\displaystyle \,w_{i}(n+1)~=~w_{i}(n)+\eta \,y(x_{i}-w_{i}(n)y)} . === Stability and PCA === In analyzing the convergence of a single neuron evolving by Oja's rule, one extracts the first principal component, or feature, of a data set. Furthermore, with extensions using the Generalized Hebbian Algorithm, one can create a multi-Oja neural network that can extract as many features as desired, allowing for principal components analysis. A principal component aj is extracted from a dataset x through some associated vector qj, or aj = qj⋅x, and we can restore our original dataset by taking x = ∑ j a j q j {\displaystyle \mathbf {x} ~=~\sum _{j}a_{j}\mathbf {q} _{j}} . In the case of a single neuron trained by Oja's rule, we find the weight vector converges to q1, or the first principal component, as time or number of iterations approaches infinity. We can also define, given a set of input vectors Xi, that its correlation matrix Rij = XiXj has an associated eigenvector given by qj with eigenvalue λj. The variance of outputs of our Oja neuron σ2(n) = ⟨y2(n)⟩ then converges with time iterations to the principal eigenvalue, or lim n → ∞ σ 2 ( n ) = λ 1 {\displaystyle \lim _{n\rightarrow \infty }\sigma ^{2}(n)~=~\lambda _{1}} . These results are derived using Lyapunov function analysis, and they show that Oja's neuron necessarily converges on strictly the first principal component if certain conditions are met in our original learning rule. Most importantly, our learning rate η is allowed to vary with time, but only such that its sum is divergent but its power sum is convergent, that is ∑ n = 1 ∞ η ( n ) = ∞ , ∑ n = 1 ∞ η ( n ) p < ∞ , p > 1 {\displaystyle \sum _{n=1}^{\infty }\eta (n)=\infty ,~~~\sum _{n=1}^{\infty }\eta (n)^{p}<\infty ,~~~p>1} . Our output activation function y(x(n)) is also allowed to be nonlinear and nonstatic, but it must be continuously differentiable in both x and w and have derivatives bounded in time. == Applications == Oja's rule was originally described in Oja's 1982 paper, but the principle of self-organization to which it is applied is first attributed to Alan Turing in 1952. PCA has also had a long history of use before Oja's rule formalized its use in network computation in 1989. The model can thus be applied to any problem of self-organizing mapping, in particular those in which feature extraction is of primary interest. Therefore, Oja's rule has an important place in image and speech processing. It is also useful as it expands easily to higher dimensions of processing, thus being able to integrate multiple outputs quickly. A canonical example is its use in binocular vision. === Biology and Oja's subspace rule === There is clear evidence for both long-term potentiation and long-term depression in biological neural networks, along with a normalization effect in both input weights and neuron outputs. However, while there is no direct experimental evidence yet of Oja's rule active in a biological neural network, a biophysical derivation of a generalization of the rule is possible. Such a derivation requires retrograde signalling from the postsynaptic neuron, which is biologically plausible (see neural backpropagation), and takes the form of Δ w i j ∝ ⟨ x i y j ⟩ − ϵ ⟨ ( c p r e ∗ ∑ k w i k y k ) ⋅ ( c p o s t ∗ y j ) ⟩ , {\displaystyle \Delta w_{ij}~\propto ~\langle x_{i}y_{j}\rangle -\epsilon \left\langle \left(c_{\mathrm {pre} }\sum _{k}w_{ik}y_{k}\right)\cdot \left(c_{\mathrm {post} }y_{j}\right)\right\rangle ,} where as before wij is the synaptic weight between the ith input and jth output neurons, x is the input, y is the postsynaptic output, and we define ε to be a constant analogous the learning rate, and cpre and cpost are presynaptic and postsynaptic functions that model the weakening of signals over time. Note that the angle brackets denote the average and the ∗ operator is a convolution. By taking the pre- and post-synaptic functions into frequency space and combining integration terms with the convolution, we find that this gives an arbitrary-dimensional generalization of Oja's rule known as Oja's Subspace, namely Δ w = C x ⋅ w − w ⋅ C y . {\displaystyle \Delta w~=~Cx\cdot w-w\cdot Cy.}

  Read more →
• 

  Mathematical morphology

  Mathematical morphology (MM) is a theory and technique for analyzing and processing geometrical structures. It's based on set theory, lattice theory, topology, and random functions. MM is most commonly applied to digital images, but it can be employed as well on graphs, surface meshes, solids, and many other spatial structures. Topological and geometrical continuous-space concepts such as size, shape, convexity, connectivity, and geodesic distance, were introduced by MM on both continuous and discrete spaces. MM is also the foundation of morphological image processing, which consists of a set of operators that transform images according to the above characterizations. The basic morphological operators are erosion, dilation, opening and closing. MM was originally developed for binary images, and was later extended to grayscale functions and images. The subsequent generalization to complete lattices is widely accepted today as MM's theoretical foundation. == History == Mathematical Morphology was developed in 1964 by the collaborative work of Georges Matheron and Jean Serra, at the École des Mines de Paris, France. Matheron supervised the PhD thesis of Serra, devoted to the quantification of mineral characteristics from thin cross sections, and this work resulted in a novel practical approach, as well as theoretical advancements in integral geometry and topology. In 1968, the Centre de Morphologie Mathématique was founded by the École des Mines de Paris in Fontainebleau, France, led by Matheron and Serra. During the rest of the 1960s and most of the 1970s, MM dealt essentially with binary images, treated as sets, and generated a large number of binary operators and techniques: Hit-or-miss transform, dilation, erosion, opening, closing, granulometry, thinning, skeletonization, ultimate erosion, conditional bisector, and others. A random approach was also developed, based on novel image models. Most of the work in that period was developed in Fontainebleau. From the mid-1970s to mid-1980s, MM was generalized to grayscale functions and images as well. Besides extending the main concepts (such as dilation, erosion, etc.) to functions, this generalization yielded new operators, such as morphological gradients, top-hat transform and the Watershed (MM's main segmentation approach). In the 1980s and 1990s, MM gained a wider recognition, as research centers in several countries began to adopt and investigate the method. MM started to be applied to a large number of imaging problems and applications, especially in the field of non-linear filtering of noisy images. In 1986, Serra further generalized MM, this time to a theoretical framework based on complete lattices. This generalization brought flexibility to the theory, enabling its application to a much larger number of structures, including color images, video, graphs, meshes, etc. At the same time, Matheron and Serra also formulated a theory for morphological filtering, based on the new lattice framework. The 1990s and 2000s also saw further theoretical advancements, including the concepts of connections and levelings. In 1993, the first International Symposium on Mathematical Morphology (ISMM) took place in Barcelona, Spain. Since then, ISMMs are organized every 2–3 years: Fontainebleau, France (1994); Atlanta, USA (1996); Amsterdam, Netherlands (1998); Palo Alto, CA, USA (2000); Sydney, Australia (2002); Paris, France (2005); Rio de Janeiro, Brazil (2007); Groningen, Netherlands (2009); Intra (Verbania), Italy (2011); Uppsala, Sweden (2013); Reykjavík, Iceland (2015); Fontainebleau, France (2017); and Saarbrücken, Germany (2019). =

  Read more →
• 

  Proximal policy optimization

  Proximal policy optimization (PPO) is a reinforcement learning (RL) algorithm for training an intelligent agent. Specifically, it is a policy gradient method, often used for deep RL when the policy network is very large. == History == The predecessor to PPO, Trust Region Policy Optimization (TRPO), was published in 2015. It addressed the instability issue of another algorithm, the Deep Q-Network (DQN), by using the trust region method to limit the KL divergence between the old and new policies. However, TRPO uses the Hessian matrix (a matrix of second derivatives) to enforce the trust region, but the Hessian is inefficient for large-scale problems. PPO was published in 2017. It was essentially an approximation of TRPO that does not require computing the Hessian. The KL divergence constraint was approximated by simply clipping the policy gradient. Since 2018, PPO was the default RL algorithm at OpenAI. PPO has been applied to many areas, such as controlling a robotic arm, beating professional players at Dota 2 (OpenAI Five), and playing Atari games. == TRPO == TRPO, the predecessor of PPO, is an on-policy algorithm. It can be used for environments with either discrete or continuous action spaces. The pseudocode is as follows: Input: initial policy parameters θ 0 {\textstyle \theta _{0}} , initial value function parameters ϕ 0 {\textstyle \phi _{0}} Hyperparameters: KL-divergence limit δ {\textstyle \delta } , backtracking coefficient α {\textstyle \alpha } , maximum number of backtracking steps K {\textstyle K} for k = 0 , 1 , 2 , … {\textstyle k=0,1,2,\ldots } do Collect set of trajectories D k = { τ i } {\textstyle {\mathcal {D}}_{k}=\left\{\tau _{i}\right\}} by running policy π k = π ( θ k ) {\textstyle \pi _{k}=\pi \left(\theta _{k}\right)} in the environment. Compute rewards-to-go R ^ t {\textstyle {\hat {R}}_{t}} . Compute advantage estimates, A ^ t {\textstyle {\hat {A}}_{t}} (using any method of advantage estimation) based on the current value function V ϕ k {\textstyle V_{\phi _{k}}} . Estimate policy gradient as g ^ k = 1 | D k | ∑ τ ∈ D k ∑ t = 0 T ∇ θ log ⁡ π θ ( a t ∣ s t ) | θ k A ^ t {\displaystyle {\hat {g}}_{k}=\left.{\frac {1}{\left|{\mathcal {D}}_{k}\right|}}\sum _{\tau \in {\mathcal {D}}_{k}}\sum _{t=0}^{T}\nabla _{\theta }\log \pi _{\theta }\left(a_{t}\mid s_{t}\right)\right|_{\theta _{k}}{\hat {A}}_{t}} Use the conjugate gradient algorithm to compute x ^ k ≈ H ^ k − 1 g ^ k {\displaystyle {\hat {x}}_{k}\approx {\hat {H}}_{k}^{-1}{\hat {g}}_{k}} where H ^ k {\textstyle {\hat {H}}_{k}} is the Hessian of the sample average KL-divergence. Update the policy by backtracking line search with θ k + 1 = θ k + α j 2 δ x ^ k T H ^ k x ^ k x ^ k {\displaystyle \theta _{k+1}=\theta _{k}+\alpha ^{j}{\sqrt {\frac {2\delta }{{\hat {x}}_{k}^{T}{\hat {H}}_{k}{\hat {x}}_{k}}}}{\hat {x}}_{k}} where j ∈ { 0 , 1 , 2 , … K } {\textstyle j\in \{0,1,2,\ldots K\}} is the smallest value which improves the sample loss and satisfies the sample KL-divergence constraint. Fit value function by regression on mean-squared error: ϕ k + 1 = arg ⁡ min ϕ 1 | D k | T ∑ τ ∈ D k ∑ t = 0 T ( V ϕ ( s t ) − R ^ t ) 2 {\displaystyle \phi _{k+1}=\arg \min _{\phi }{\frac {1}{\left|{\mathcal {D}}_{k}\right|T}}\sum _{\tau \in {\mathcal {D}}_{k}}\sum _{t=0}^{T}\left(V_{\phi }\left(s_{t}\right)-{\hat {R}}_{t}\right)^{2}} typically via some gradient descent algorithm. == PPO == The pseudocode is as follows: Input: initial policy parameters θ 0 {\textstyle \theta _{0}} , initial value function parameters ϕ 0 {\textstyle \phi _{0}} for k = 0 , 1 , 2 , … {\textstyle k=0,1,2,\ldots } do Collect set of trajectories D k = { τ i } {\textstyle {\mathcal {D}}_{k}=\left\{\tau _{i}\right\}} by running policy π k = π ( θ k ) {\textstyle \pi _{k}=\pi \left(\theta _{k}\right)} in the environment. Compute rewards-to-go R ^ t {\textstyle {\hat {R}}_{t}} . Compute advantage estimates, A ^ t {\textstyle {\hat {A}}_{t}} (using any method of advantage estimation) based on the current value function V ϕ k {\textstyle V_{\phi _{k}}} . Update the policy by maximizing the PPO-Clip objective: θ k + 1 = arg ⁡ max θ 1 | D k | T ∑ τ ∈ D k ∑ t = 0 T min ( π θ ( a t ∣ s t ) π θ k ( a t ∣ s t ) A π θ k ( s t , a t ) , g ( ϵ , A π θ k ( s t , a t ) ) ) {\displaystyle \theta _{k+1}=\arg \max _{\theta }{\frac {1}{\left|{\mathcal {D}}_{k}\right|T}}\sum _{\tau \in {\mathcal {D}}_{k}}\sum _{t=0}^{T}\min \left({\frac {\pi _{\theta }\left(a_{t}\mid s_{t}\right)}{\pi _{\theta _{k}}\left(a_{t}\mid s_{t}\right)}}A^{\pi _{\theta _{k}}}\left(s_{t},a_{t}\right),\quad g\left(\epsilon ,A^{\pi _{\theta _{k}}}\left(s_{t},a_{t}\right)\right)\right)} typically via stochastic gradient ascent with Adam. Fit value function by regression on mean-squared error: ϕ k + 1 = arg ⁡ min ϕ 1 | D k | T ∑ τ ∈ D k ∑ t = 0 T ( V ϕ ( s t ) − R ^ t ) 2 {\displaystyle \phi _{k+1}=\arg \min _{\phi }{\frac {1}{\left|{\mathcal {D}}_{k}\right|T}}\sum _{\tau \in {\mathcal {D}}_{k}}\sum _{t=0}^{T}\left(V_{\phi }\left(s_{t}\right)-{\hat {R}}_{t}\right)^{2}} typically via some gradient descent algorithm. Like all policy gradient methods, PPO is used for training an RL agent whose actions are determined by a differentiable policy function by gradient ascent. Intuitively, a policy gradient method takes small policy update steps, so the agent can reach higher and higher rewards in expectation. Policy gradient methods may be unstable: A step size that is too big may direct the policy in a suboptimal direction, thus having little possibility of recovery; a step size that is too small lowers the overall efficiency. To solve the instability, PPO implements a clip function that constrains the policy update of an agent from being too large, so that larger step sizes may be used without negatively affecting the gradient ascent process. === Basic concepts === To begin the PPO training process, the agent is set in an environment to perform actions based on its current input. In the early phase of training, the agent can freely explore solutions and keep track of the result. Later, with a certain amount of transition samples and policy updates, the agent will select an action to take by randomly sampling from the probability distribution P ( A | S ) {\displaystyle P(A|S)} generated by the policy network. The actions that are most likely to be beneficial will have the highest probability of being selected from the random sample. After an agent arrives at a different scenario (a new state) by acting, it is rewarded with a positive reward or a negative reward. The objective of an agent is to maximize the cumulative reward signal across sequences of states, known as episodes. === Policy gradient laws: the advantage function === The advantage function (denoted as A {\displaystyle A} ) is central to PPO, as it tries to answer the question of whether a specific action of the agent is better or worse than some other possible action in a given state. By definition, the advantage function is an estimate of the relative value for a selected action. If the output of this function is positive, it means that the action in question is better than the average return, so the possibilities of selecting that specific action will increase. The opposite is true for a negative advantage output. The advantage function can be defined as A = Q − V {\displaystyle A=Q-V} , where Q {\displaystyle Q} is the discounted sum of rewards (the total weighted reward for the completion of an episode) and V {\displaystyle V} is the baseline estimate. Since the advantage function is calculated after the completion of an episode, the program records the outcome of the episode. Therefore, calculating advantage is essentially an unsupervised learning problem. The baseline estimate comes from the value function that outputs the expected discounted sum of an episode starting from the current state. In the PPO algorithm, the baseline estimate will be noisy (with some variance), as it also uses a neural network, like the policy function itself. With Q {\displaystyle Q} and V {\displaystyle V} computed, the advantage function is calculated by subtracting the baseline estimate from the actual discounted return. If A > 0 {\displaystyle A>0} , the actual return of the action is better than the expected return from experience; if A < 0 {\displaystyle A<0} , the actual return is worse. === Ratio function === In PPO, the ratio function ( r t {\displaystyle r_{t}} ) calculates the probability of selecting action a {\displaystyle a} in state s {\displaystyle s} given the current policy network, divided by the previous probability under the old policy. In other words: If r t ( θ ) > 1 {\displaystyle r_{t}(\theta )>1} , where θ {\displaystyle \theta } are the policy network parameters, then selecting action a {\displaystyle a} in state s {\displaystyle s} is more likely based on the current policy than the previous policy. If 0 ≤ r t ( θ ) < 1 {\displaystyle 0\leq r_{t}(\theta )<1} , then selecting actio

  Read more →
• 

  Correspondence analysis

  Correspondence analysis (CA) is a multivariate statistical technique proposed by Herman Otto Hartley (Hirschfeld) and later developed by Jean-Paul Benzécri. It is conceptually similar to principal component analysis, but applies to categorical rather than continuous data. In a manner similar to principal component analysis, it provides a means of displaying or summarising a set of data in two-dimensional graphical form. Its aim is to display in a biplot any structure hidden in the multivariate setting of the data table. As such it is a technique from the field of multivariate ordination. Since the variant of CA described here can be applied either with a focus on the rows or on the columns it should in fact be called simple (symmetric) correspondence analysis. It is traditionally applied to the contingency table of a pair of nominal variables where each cell contains either a count or a zero value. If more than two categorical variables are to be summarized, a variant called multiple correspondence analysis should be chosen instead. CA may also be applied to binary data given the presence/absence coding represents simplified count data i.e. a 1 describes a positive count and 0 stands for a count of zero. Depending on the scores used CA preserves the chi-square distance between either the rows or the columns of the table. Because CA is a descriptive technique, it can be applied to tables regardless of a significant chi-squared test. Although the χ 2 {\displaystyle \chi ^{2}} statistic used in inferential statistics and the chi-square distance are computationally related they should not be confused since the latter works as a multivariate statistical distance measure in CA while the χ 2 {\displaystyle \chi ^{2}} statistic is in fact a scalar not a metric. == Details == Like principal components analysis, correspondence analysis creates orthogonal components (or axes) and, for each item in a table i.e. for each row, a set of scores (sometimes called factor scores, see Factor analysis). Correspondence analysis is performed on the data table, conceived as matrix C of size m × n where m is the number of rows and n is the number of columns. In the following mathematical description of the method capital letters in italics refer to a matrix while letters in italics refer to vectors. Understanding the following computations requires knowledge of matrix algebra. === Preprocessing === Before proceeding to the central computational step of the algorithm, the values in matrix C have to be transformed. First compute a set of weights for the columns and the rows (sometimes called masses), where row and column weights are given by the row and column vectors, respectively: w m = 1 n C C 1 , w n = 1 n C 1 T C . {\displaystyle w_{m}={\frac {1}{n_{C}}}C\mathbf {1} ,\quad w_{n}={\frac {1}{n_{C}}}\mathbf {1} ^{T}C.} Here n C = ∑ i = 1 n ∑ j = 1 m C i j {\displaystyle n_{C}=\sum _{i=1}^{n}\sum _{j=1}^{m}C_{ij}} is the sum of all cell values in matrix C, or short the sum of C, and 1 {\displaystyle \mathbf {1} } is a column vector of ones with the appropriate dimension. Put in simple words, w m {\displaystyle w_{m}} is just a vector whose elements are the row sums of C divided by the sum of C, and w n {\displaystyle w_{n}} is a vector whose elements are the column sums of C divided by the sum of C. The weights are transformed into diagonal matrices W m = diag ⁡ ( 1 / w m ) {\displaystyle W_{m}=\operatorname {diag} (1/{\sqrt {w_{m}}})} and W n = diag ⁡ ( 1 / w n ) {\displaystyle W_{n}=\operatorname {diag} (1/{\sqrt {w_{n}}})} where the diagonal elements of W n {\displaystyle W_{n}} are 1 / w n {\displaystyle 1/{\sqrt {w_{n}}}} and those of W m {\displaystyle W_{m}} are 1 / w m {\displaystyle 1/{\sqrt {w_{m}}}} respectively i.e. the vector elements are the inverses of the square roots of the masses. The off-diagonal elements are all 0. Next, compute matrix P {\displaystyle P} by dividing C {\displaystyle C} by its sum P = 1 n C C . {\displaystyle P={\frac {1}{n_{C}}}C.} In simple words, Matrix P {\displaystyle P} is just the data matrix (contingency table or binary table) transformed into portions i.e. each cell value is just the cell portion of the sum of the whole table. Finally, compute matrix S {\displaystyle S} , sometimes called the matrix of standardized residuals, by matrix multiplication as S = W m ( P − w m w n ) W n {\displaystyle S=W_{m}(P-w_{m}w_{n})W_{n}} Note, the vectors w m {\displaystyle w_{m}} and w n {\displaystyle w_{n}} are combined in an outer product resulting in a matrix of the same dimensions as P {\displaystyle P} . In words the formula reads: matrix outer ⁡ ( w m , w n ) {\displaystyle \operatorname {outer} (w_{m},w_{n})} is subtracted from matrix P {\displaystyle P} and the resulting matrix is scaled (weighted) by the diagonal matrices W m {\displaystyle W_{m}} and W n {\displaystyle W_{n}} . Multiplying the resulting matrix by the diagonal matrices is equivalent to multiply the i-th row (or column) of it by the i-th element of the diagonal of W m {\displaystyle W_{m}} or W n {\displaystyle W_{n}} , respectively. === Interpretation of preprocessing === The vectors w m {\displaystyle w_{m}} and w n {\displaystyle w_{n}} are the row and column masses or the marginal probabilities for the rows and columns, respectively. Subtracting matrix outer ⁡ ( w m , w n ) {\displaystyle \operatorname {outer} (w_{m},w_{n})} from matrix P {\displaystyle P} is the matrix algebra version of double centering the data. Multiplying this difference by the diagonal weighting matrices results in a matrix containing weighted deviations from the origin of a vector space. This origin is defined by matrix outer ⁡ ( w m , w n ) {\displaystyle \operatorname {outer} (w_{m},w_{n})} . In fact matrix outer ⁡ ( w m , w n ) {\displaystyle \operatorname {outer} (w_{m},w_{n})} is identical with the matrix of expected frequencies in the chi-squared test. Therefore S {\displaystyle S} is computationally related to the independence model used in that test. But since CA is not an inferential method the term independence model is inappropriate here. === Orthogonal components === The table S {\displaystyle S} is then decomposed by a singular value decomposition as S = U Σ V ∗ {\displaystyle S=U\Sigma V^{}\,} where U {\displaystyle U} and V {\displaystyle V} are the left and right singular vectors of S {\displaystyle S} and Σ {\displaystyle \Sigma } is a square diagonal matrix with the singular values σ i {\displaystyle \sigma _{i}} of S {\displaystyle S} on the diagonal. Σ {\displaystyle \Sigma } is of dimension p ≤ ( min ( m , n ) − 1 ) {\displaystyle p\leq (\min(m,n)-1)} hence U {\displaystyle U} is of dimension m×p and V {\displaystyle V} is of n×p. As orthonormal vectors U {\displaystyle U} and V {\displaystyle V} fulfill U ∗ U = V ∗ V = I {\displaystyle U^{}U=V^{}V=I} . In other words, the multivariate information that is contained in C {\displaystyle C} as well as in S {\displaystyle S} is now distributed across two (coordinate) matrices U {\displaystyle U} and V {\displaystyle V} and a diagonal (scaling) matrix Σ {\displaystyle \Sigma } . The vector space defined by them has as number of dimensions p, that is the smaller of the two values, number of rows and number of columns, minus 1. === Inertia === While a principal component analysis may be said to decompose the (co)variance, and hence its measure of success is the amount of (co-)variance covered by the first few PCA axes - measured in eigenvalue -, a CA works with a weighted (co-)variance which is called inertia. The sum of the squared singular values is the total inertia I {\displaystyle \mathrm {I} } of the data table, computed as I = ∑ i = 1 p σ i 2 . {\displaystyle \mathrm {I} =\sum _{i=1}^{p}\sigma _{i}^{2}.} The total inertia I {\displaystyle \mathrm {I} } of the data table can also computed directly from S {\displaystyle S} as I = ∑ i = 1 n ∑ j = 1 m s i j 2 . {\displaystyle \mathrm {I} =\sum _{i=1}^{n}\sum _{j=1}^{m}s_{ij}^{2}.} The amount of inertia covered by the i-th set of singular vectors is ι i {\displaystyle \iota _{i}} , the principal inertia. The higher the portion of inertia covered by the first few singular vectors i.e. the larger the sum of the principal inertiae in comparison to the total inertia, the more successful a CA is. Therefore, all principal inertia values are expressed as portion ϵ i {\displaystyle \epsilon _{i}} of the total inertia ϵ i = σ i 2 / ∑ i = 1 p σ i 2 {\displaystyle \epsilon _{i}=\sigma _{i}^{2}/\sum _{i=1}^{p}\sigma _{i}^{2}} and are presented in the form of a scree plot. In fact a scree plot is just a bar plot of all principal inertia portions ϵ i {\displaystyle \epsilon _{i}} . === Coordinates === To transform the singular vectors to coordinates which preserve the chi-square distances between rows or columns an additional weighting step is necessary. The resulting coordinates are called principal coordinates in CA text books. If principal coordinates are used for

  Read more →
• 

  Differential evolution

  Differential evolution (DE) is an evolutionary algorithm to optimize a problem by iteratively trying to improve a candidate solution with regard to a given measure of quality. Such methods are commonly known as metaheuristics as they make few or no assumptions about the optimized problem and can search very large spaces of candidate solutions. However, metaheuristics such as DE do not guarantee an optimal solution is ever found. DE is used for multidimensional real-valued functions but does not use the gradient of the problem being optimized, which means DE does not require the optimization problem to be differentiable, as is required by classic optimization methods such as gradient descent and quasi-newton methods. DE can therefore also be used on optimization problems that are not even continuous, are noisy, change over time, etc. DE optimizes a problem by maintaining a population of candidate solutions and creating new candidate solutions by combining existing ones according to its simple formulae, and then keeping whichever candidate solution has the best score or fitness on the optimization problem at hand. In this way, the optimization problem is treated as a black box that merely provides a measure of quality given a candidate solution and the gradient is therefore not needed. == History == Storn and Price introduced Differential Evolution in 1995. Books have been published on theoretical and practical aspects of using DE in parallel computing, multiobjective optimization, constrained optimization, and the books also contain surveys of application areas. Surveys on the multi-faceted research aspects of DE can be found in journal articles. == Algorithm == A basic variant of the DE algorithm works by having a population of candidate solutions (called agents). These agents are moved around in the search-space by using simple mathematical formulae to combine the positions of existing agents from the population. If the new position of an agent is an improvement then it is accepted and forms part of the population, otherwise the new position is simply discarded. The process is repeated and by doing so it is hoped, but not guaranteed, that a satisfactory solution will eventually be discovered. Formally, let f : R n → R {\displaystyle f:\mathbb {R} ^{n}\to \mathbb {R} } be the fitness function which must be minimized (note that maximization can be performed by considering the function h := − f {\displaystyle h:=-f} instead). The function takes a candidate solution as argument in the form of a vector of real numbers. It produces a real number as output which indicates the fitness of the given candidate solution. The gradient of f {\displaystyle f} is not known. The goal is to find a solution m {\displaystyle \mathbf {m} } for which f ( m ) ≤ f ( p ) {\displaystyle f(\mathbf {m} )\leq f(\mathbf {p} )} for all p {\displaystyle \mathbf {p} } in the search-space, which means that m {\displaystyle \mathbf {m} } is the global minimum. Let x ∈ R n {\displaystyle \mathbf {x} \in \mathbb {R} ^{n}} designate a candidate solution (agent) in the population. The basic DE algorithm can then be described as follows: Choose the parameters NP ≥ 4 {\displaystyle {\text{NP}}\geq 4} , CR ∈ [ 0 , 1 ] {\displaystyle {\text{CR}}\in [0,1]} , and F ∈ [ 0 , 2 ] {\displaystyle F\in [0,2]} . NP : NP {\displaystyle {\text{NP}}} is the population size, i.e. the number of candidate agents or "parents". CR : The parameter CR ∈ [ 0 , 1 ] {\displaystyle {\text{CR}}\in [0,1]} is called the crossover probability. F : The parameter F ∈ [ 0 , 2 ] {\displaystyle F\in [0,2]} is called the differential weight. Typical settings are N P = 10 n {\displaystyle NP=10n} , C R = 0.9 {\displaystyle CR=0.9} and F = 0.8 {\displaystyle F=0.8} . Optimization performance may be greatly impacted by these choices; see below. Initialize all agents x {\displaystyle \mathbf {x} } with random positions in the search-space. Until a termination criterion is met (e.g. number of iterations performed, or adequate fitness reached), repeat the following: For each agent x {\displaystyle \mathbf {x} } in the population do: Pick three agents a , b {\displaystyle \mathbf {a} ,\mathbf {b} } , and c {\displaystyle \mathbf {c} } from the population at random, they must be distinct from each other as well as from agent x {\displaystyle \mathbf {x} } . ( a {\displaystyle \mathbf {a} } is called the "base" vector.) Pick a random index R ∈ { 1 , … , n } {\displaystyle R\in \{1,\ldots ,n\}} where n {\displaystyle n} is the dimensionality of the problem being optimized. Compute the agent's potentially new position y = [ y 1 , … , y n ] {\displaystyle \mathbf {y} =[y_{1},\ldots ,y_{n}]} as follows: For each i ∈ { 1 , … , n } {\displaystyle i\in \{1,\ldots ,n\}} , pick a uniformly distributed random number r i ∼ U ( 0 , 1 ) {\displaystyle r_{i}\sim U(0,1)} If r i < C R {\displaystyle r_{i} Read more →

• 

  Headway (app)

  Headway, also known as the Headway App, is an educational technology (EdTech) product that provides short text and audio summaries of nonfiction books. The product was launched in 2019 by Anton Pavlovsky and is developed by Headway Inc, a global consumer tech company that operates in the lifelong learning space. == History == The Headway app was launched in January 2019, with the first version of the application released the same year. In 2021, Headway ranked first globally in downloads within the book summary application niche. In 2022, the application received the Golden Novum Design Award for product design. In 2023 and 2024, Headway appeared in several App Store editorial selections, including App of the Day in multiple countries, and received an Editors’ Choice label in the United States. In April 2025, the application was listed as a Webby Honoree in the Learning & Education category. The company has also launched the Headway Scholarship for Book Lovers. As of 2025, publicly available reporting notes that the Headway app has surpassed 50 million downloads and is among the Top 10 iOS applications by revenue in the Education category worldwide. == Products and features == The Headway app provides short-form summaries of nonfiction books in both text and audio formats. Content is produced by an in-house team of writers, editors, and voice actors. Features include highlighting and saving key insights, spaced repetition for knowledge retention, and offline access to downloaded summaries. The app is available on iOS, iPadOS, watchOS, Android, CarPlay, and Android Auto, and supports multiple languages. == Pricing == Headway operates on a subscription business model, with optional paid plans alongside free access. The company publicly provides its terms of use, privacy policy, subscription details, and AI usage policy on its official website. == Technology and integrations == Headway reports that its book summaries are written and edited manually, while artificial intelligence tools are used in limited supporting functions, such as experimental conversational features and selected marketing processes. == Adoption == According to figures released by the company, the app has exceeded 50 million downloads worldwide. Sensor Tower data indicates that Headway has been the most downloaded application in its niche since October 2020. In January 2025, the app claimed the #1 position in the Education category in both the United States and United Kingdom App Stores and remained among the Top 10 iOS applications globally by revenue within the Education category. == Awards == The Headway app has received several product-level distinctions. In 2023 and 2024, it appeared in multiple App Store editorial selections, including App of the Day features and an Editors’ Choice label in the United States. In 2025, the app was recognized as a Webby Honoree in the Learning & Education category. The product has also been featured in independent media roundups of notable educational applications.

  Read more →
• 

  Multiple correspondence analysis

  In statistics, multiple correspondence analysis (MCA) is a data analysis technique for nominal categorical data, used to detect and represent underlying structures in a data set. It does this by representing data as points in a low-dimensional Euclidean space. The procedure thus appears to be the counterpart of principal component analysis for categorical data. MCA can be viewed as an extension of simple correspondence analysis (CA) in that it is applicable to a large set of categorical variables. == As an extension of correspondence analysis == MCA is performed by applying the CA algorithm to either an indicator matrix (also called complete disjunctive table – CDT) or a Burt table formed from these variables. An indicator matrix is an individuals × variables matrix, where the rows represent individuals and the columns are dummy variables representing categories of the variables. Analyzing the indicator matrix allows the direct representation of individuals as points in geometric space. The Burt table is the symmetric matrix of all two-way cross-tabulations between the categorical variables, and has an analogy to the covariance matrix of continuous variables. Analyzing the Burt table is a more natural generalization of simple correspondence analysis, and individuals or the means of groups of individuals can be added as supplementary points to the graphical display. In the indicator matrix approach, associations between variables are uncovered by calculating the chi-square distance between different categories of the variables and between the individuals (or respondents). These associations are then represented graphically as "maps", which eases the interpretation of the structures in the data. Oppositions between rows and columns are then maximized, in order to uncover the underlying dimensions best able to describe the central oppositions in the data. As in factor analysis or principal component analysis, the first axis is the most important dimension, the second axis the second most important, and so on, in terms of the amount of variance accounted for. The number of axes to be retained for analysis is determined by calculating modified eigenvalues. == Details == Since MCA is adapted to draw statistical conclusions from categorical variables (such as multiple choice questions), the first thing one needs to do is to transform quantitative data (such as age, size, weight, day time, etc) into categories (using for instance statistical quantiles). When the dataset is completely represented as categorical variables, one is able to build the corresponding so-called complete disjunctive table. We denote this table X {\displaystyle X} . If I {\displaystyle I} persons answered a survey with J {\displaystyle J} multiple choices questions with 4 answers each, X {\displaystyle X} will have I {\displaystyle I} rows and 4 J {\displaystyle 4J} columns. More theoretically, assume X {\displaystyle X} is the completely disjunctive table of I {\displaystyle I} observations of K {\displaystyle K} categorical variables. Assume also that the k {\displaystyle k} -th variable have J k {\displaystyle J_{k}} different levels (categories) and set J = ∑ k = 1 K J k {\displaystyle J=\sum _{k=1}^{K}J_{k}} . The table X {\displaystyle X} is then a I × J {\displaystyle I\times J} matrix with all coefficient being 0 {\displaystyle 0} or 1 {\displaystyle 1} . Set the sum of all entries of X {\displaystyle X} to be N {\displaystyle N} and introduce Z = X / N {\displaystyle Z=X/N} . In an MCA, there are also two special vectors: first r {\displaystyle r} , that contains the sums along the rows of Z {\displaystyle Z} , and c {\displaystyle c} , that contains the sums along the columns of Z {\displaystyle Z} . Note D r = diag ( r ) {\displaystyle D_{r}={\text{diag}}(r)} and D c = diag ( c ) {\displaystyle D_{c}={\text{diag}}(c)} , the diagonal matrices containing r {\displaystyle r} and c {\displaystyle c} respectively as diagonal. With these notations, computing an MCA consists essentially in the singular value decomposition of the matrix: M = D r − 1 / 2 ( Z − r c T ) D c − 1 / 2 {\displaystyle M=D_{r}^{-1/2}(Z-rc^{T})D_{c}^{-1/2}} The decomposition of M {\displaystyle M} gives you P {\displaystyle P} , Δ {\displaystyle \Delta } and Q {\displaystyle Q} such that M = P Δ Q T {\displaystyle M=P\Delta Q^{T}} with P, Q two unitary matrices and Δ {\displaystyle \Delta } is the generalized diagonal matrix of the singular values (with the same shape as Z {\displaystyle Z} ). The positive coefficients of Δ 2 {\displaystyle \Delta ^{2}} are the eigenvalues of Z {\displaystyle Z} . The interest of MCA comes from the way observations (rows) and variables (columns) in Z {\displaystyle Z} can be decomposed. This decomposition is called a factor decomposition. The coordinates of the observations in the factor space are given by F = D r − 1 / 2 P Δ {\displaystyle F=D_{r}^{-1/2}P\Delta } The i {\displaystyle i} -th rows of F {\displaystyle F} represent the i {\displaystyle i} -th observation in the factor space. And similarly, the coordinates of the variables (in the same factor space as observations!) are given by G = D c − 1 / 2 Q Δ {\displaystyle G=D_{c}^{-1/2}Q\Delta } == Recent works and extensions == In recent years, several students of Jean-Paul Benzécri have refined MCA and incorporated it into a more general framework of data analysis known as geometric data analysis. This involves the development of direct connections between simple correspondence analysis, principal component analysis and MCA with a form of cluster analysis known as Euclidean classification. Two extensions have great practical use. It is possible to include, as active elements in the MCA, several quantitative variables. This extension is called factor analysis of mixed data (see below). Very often, in questionnaires, the questions are structured in several issues. In the statistical analysis it is necessary to take into account this structure. This is the aim of multiple factor analysis which balances the different issues (i.e. the different groups of variables) within a global analysis and provides, beyond the classical results of factorial analysis (mainly graphics of individuals and of categories), several results (indicators and graphics) specific of the group structure. == Application fields == In the social sciences, MCA is arguably best known for its application by Pierre Bourdieu, notably in his books La Distinction, Homo Academicus and The State Nobility. Bourdieu argued that there was an internal link between his vision of the social as spatial and relational --– captured by the notion of field, and the geometric properties of MCA. Sociologists following Bourdieu's work most often opt for the analysis of the indicator matrix, rather than the Burt table, largely because of the central importance accorded to the analysis of the 'cloud of individuals'. == Multiple correspondence analysis and principal component analysis == MCA can also be viewed as a PCA applied to the complete disjunctive table. To do this, the CDT must be transformed as follows. Let y i k {\displaystyle y_{ik}} denote the general term of the CDT. y i k {\displaystyle y_{ik}} is equal to 1 if individual i {\displaystyle i} possesses the category k {\displaystyle k} and 0 if not. Let denote p k {\displaystyle p_{k}} , the proportion of individuals possessing the category k {\displaystyle k} . The transformed CDT (TCDT) has as general term: x i k = y i k / p k − 1 {\displaystyle x_{ik}=y_{ik}/p_{k}-1} The unstandardized PCA applied to TCDT, the column k {\displaystyle k} having the weight p k {\displaystyle p_{k}} , leads to the results of MCA. This equivalence is fully explained in a book by Jérôme Pagès. It plays an important theoretical role because it opens the way to the simultaneous treatment of quantitative and qualitative variables. Two methods simultaneously analyze these two types of variables: factor analysis of mixed data and, when the active variables are partitioned in several groups: multiple factor analysis. This equivalence does not mean that MCA is a particular case of PCA as it is not a particular case of CA. It only means that these methods are closely linked to one another, as they belong to the same family: the factorial methods. == Software == There are numerous software of data analysis that include MCA, such as STATA and SPSS. The R package FactoMineR also features MCA. This software is related to a book describing the basic methods for performing MCA . There is also a Python package for [1] which works with numpy array matrices; the package has not been implemented yet for Spark dataframes.

  Read more →
• 

  Population model (evolutionary algorithm)

  The population model of an evolutionary algorithm (EA) describes the structural properties of its population to which its members are subject. A population is the set of all proposed solutions of an EA considered in one iteration, which are also called individuals according to the biological role model. The individuals of a population can generate further individuals as offspring with the help of the genetic operators of the procedure. The simplest and widely used population model in EAs is the global or panmictic model, which corresponds to an unstructured population. It allows each individual to choose any other individual of the population as a partner for the production of offspring by crossover, whereby the details of the selection are irrelevant as long as the fitness of the individuals plays a significant role. Due to global mate selection, the genetic information of even slightly better individuals can prevail in a population after a few generations (iteration of an EA), provided that no better other offspring have emerged in this phase. If the solution found in this way is not the optimum sought, that is called premature convergence. This effect can be observed more often in panmictic populations. In nature global mating pools are rarely found. What prevails is a certain and limited isolation due to spatial distance. The resulting local neighbourhoods initially evolve independently and mutants have a higher chance of persisting over several generations. As a result, genotypic diversity in the gene pool is preserved longer than in a panmictic population. It is therefore obvious to divide the previously global population by substructures. Two basic models were introduced for this purpose, the island models, which are based on a division of the population into fixed subpopulations that exchange individuals from time to time, and the neighbourhood models, which assign individuals to overlapping neighbourhoods, also known as cellular genetic or evolutionary algorithms (cGA or cEA). The associated division of the population also suggests a corresponding parallelization of the procedure. For this reason, the topic of population models is also frequently discussed in the literature in connection with the parallelization of EAs. == Island models == In the island model, also called the migration model or coarse grained model, evolution takes place in strictly divided subpopulations. These can be organised panmictically, but do not have to be. From time to time an exchange of individuals takes place, which is called migration. The time between an exchange is called an epoch and its end can be triggered by various criteria: E.g. after a given time or given number of completed generations, or after the occurrence of stagnation. Stagnation can be detected, for example, by the fact that no fitness improvement has occurred in the island for a given number of generations. Island models introduce a variety of new strategy parameters: Number of subpopulations Size of the subpopulations Neighbourhood relations between islands: they determine which islands are considered neighbouring and can thus exchange individuals, see picture of a simple unidirectional ring (black arrows) and its extension by additional bidirectional neighbourhood relations (additional green arrows) Criteria for the termination of an epoch, synchronous or asynchronous migration Migration rate: number or proportion of individuals involved in migration. Migrant selection: There are many alternatives for this. E.g. the best individuals can replace the worst or randomly selected ones. Depending on the migration rate, this can affect one or more individuals at a time. With these parameters, the selection pressure can be influenced to a considerable extent. For example, it increases with the interconnectedness of the islands and decreases with the number of subpopulations or the epoch length. == Neighbourhood models or cellular evolutionary algorithms == The neighbourhood model, also called diffusion model or fine grained model, defines a topological neighbouhood relation between the individuals of a population that is independent of their phenotypic properties. The fundamental idea of this model is to provide the EA population with a special structure defined as a connected graph, in which each vertex is an individual that communicates with its nearest neighbours. Particularly, individuals are conceptually set in a toroidal mesh, and are only allowed to recombine with close individuals. This leads to a kind of locality known as isolation by distance. The set of potential mates of an individual is called its neighbourhood or deme. The adjacent figure illustrates that by showing two slightly overlapping neighbourhoods of two individuals marked yellow, through which genetic information can spread between the two demes. It is known that in this kind of algorithm, similar individuals tend to cluster and create niches that are independent of the deme boundaries and, in particular, can be larger than a deme. There is no clear borderline between adjacent groups, and close niches could be easily colonized by competitive ones and maybe merge solution contents during this process. Simultaneously, farther niches can be affected more slowly. EAs with this type of population are also well known as cellular EAs (cEA) or cellular genetic algorithms (cGA). A commonly used structure for arranging the individuals of a population is a 2D toroidal grid, although the number of dimensions can be easily extended (to 3D) or reduced (to 1D, e.g. a ring, see the figure on the right). The neighbourhood of a particular individual in the grid is defined in terms of the Manhattan distance from it to others in the population. In the basic algorithm, all the neighbourhoods have the same size and identical shapes. The two most commonly used neighbourhoods for two-dimensional cEAs are L5 and C9, see the figure on the left. Here, L stands for Linear while C stands for Compact. Each deme represents a panmictic subpopulation within which mate selection and the acceptance of offspring takes place by replacing the parent. The rules for the acceptance of offspring are local in nature and based on the neighbourhood: for example, it can be specified that the best offspring must be better than the parent being replaced or, less strictly, only better than the worst individual in the deme. The first rule is elitist and creates a higher selective pressure than the second non-elitist rule. In elitist EAs, the best individual of a population always survives. In this respect, they deviate from the biological model. The overlap of the neighbourhoods causes a mostly slow spread of genetic information across the neighbourhood boundaries, hence the name diffusion model. A better offspring now needs more generations than in panmixy to spread in the population. This promotes the emergence of local niches and their local evolution, thus preserving genotypic diversity over a longer period of time. The result is a better and dynamic balance between breadth and depth search adapted to the search space during a run. Depth search takes place in the niches and breadth search in the niche boundaries and through the evolution of the different niches of the whole population. For the same neighbourhood size, the spread of genetic information is larger for elongated figures like L9 than for a block like C9, and again significantly larger than for a ring. This means that ring neighbourhoods are well suited for achieving high quality results, even if this requires comparatively long run times. On the other hand, if one is primarily interested in fast and good, but possibly suboptimal results, 2D topologies are more suitable. == Comparison == When applying both population models to genetic algorithms, evolutionary strategy and other EAs, the splitting of a total population into subpopulations usually reduces the risk of premature convergence and leads to better results overall more reliably and faster than would be expected with panmictic EAs. Island models have the disadvantage compared to neighbourhood models that they introduce a large number of new strategy parameters. Despite the existing studies on this topic in the literature, a certain risk of unfavourable settings remains for the user. With neighbourhood models, on the other hand, only the size of the neighbourhood has to be specified and, in the case of the two-dimensional model, the choice of the neighbourhood figure is added. == Parallelism == Since both population models imply population partitioning, they are well suited as a basis for parallelizing an EA. This applies even more to cellular EAs, since they rely only on locally available information about the members of their respective demes. Thus, in the extreme case, an independent execution thread can be assigned to each individual, so that the entire cEA can run on a parallel hardware platform. The island model also supports p

  Read more →