AI Data Jobs Near Me

AI Data Jobs Near Me — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Brill tagger

  The Brill tagger is an inductive method for part-of-speech tagging. It was described and invented by Eric Brill in his 1993 PhD thesis. It can be summarized as an "error-driven transformation-based tagger". It is: a form of supervised learning, which aims to minimize error; and, a transformation-based process, in the sense that a tag is assigned to each word and changed using a set of predefined rules. In the transformation process, if the word is known, it first assigns the most frequent tag, or if the word is unknown, it naively assigns the tag "noun" to it. High accuracy is eventually achieved by applying these rules iteratively and changing the incorrect tags. This approach ensures that valuable information such as the morphosyntactic construction of words is employed in an automatic tagging process. == Algorithm == The algorithm starts with initialization, which is the assignment of tags based on their probability for each word (for example, "dog" is more often a noun than a verb). Then "patches" are determined via rules that correct (probable) tagging errors made in the initialization phase: Initialization: Known words (in vocabulary): assigning the most frequent tag associated to a form of the word Unknown word == Rules and processing == The input text is first tokenized, or broken into words. Typically in natural language processing, contractions such as "'s", "n't", and the like are considered separate word tokens, as are punctuation marks. A dictionary and some morphological rules then provide an initial tag for each word token. For example, a simple lookup would reveal that "dog" may be a noun or a verb (the most frequent tag is simply chosen), while an unknown word will be assigned some tag(s) based on capitalization, various prefix or suffix strings, etc. (such morphological analyses, which Brill calls Lexical Rules, may vary between implementations). After all word tokens have (provisional) tags, contextual rules apply iteratively, to correct the tags by examining small amounts of context. This is where the Brill method differs from other part of speech tagging methods such as those using Hidden Markov Models. Rules are reapplied repeatedly, until a threshold is reached, or no more rules can apply. Brill rules are of the general form: tag1 → tag2 IF Condition where the Condition tests the preceding and/or following word tokens, or their tags (the notation for such rules differs between implementations). For example, in Brill's notation: IN NN WDPREVTAG DT while would change the tag of a word from IN (preposition) to NN (common noun), if the preceding word's tag is DT (determiner) and the word itself is "while". This covers cases like "all the while" or "in a while", where "while" should be tagged as a noun rather than its more common use as a conjunction (many rules are more general). Rules should only operate if the tag being changed is also known to be permissible, for the word in question or in principle (for example, most adjectives in English can also be used as nouns). Rules of this kind can be implemented by simple Finite-state machines. See Part of speech tagging for more general information including descriptions of the Penn Treebank and other sets of tags. Typical Brill taggers use a few hundred rules, which may be developed by linguistic intuition or by machine learning on a pre-tagged corpus. == Code == Brill's code pages at Johns Hopkins University are no longer on the web. An archived version of a mirror of the Brill tagger at its latest version as it was available at Plymouth Tech can be found on Archive.org. The software uses the MIT License.

  Read more →
• 

  Strategic Air Command Digital Information Network

  The Strategic Air Command DIgital Network (SACDIN) was a United States military computer network that provided computerized record communications, replacing the Data Transmission Subsystem and part of the Data Display Subsystem of the SAC Automated Command and Control System. SACDIN enabled a rapid flow of communications from headquarters SAC to its fielded forces, such as B-52 bases and ICBM Launch Control Centers. == Logistics == Major portions of SACDIN were developed, engineered and installed by the International Telephone and Telegraph (ITT) company, under contract to the Electronic Systems Center. == Chronology == 1969 - Headquarters SAC submits a request to the Joint Chiefs of Staff to study an expanded communications system, known as the SAC Total Information Network (SATIN). It would interconnect Air Force Satellite Communications (AFSATCOM), Advanced Airborne Command Post (AABNCP), Airborne Command Post (ABNCP), high frequency/single sideband radio HF/SSB radio, SAC Automated Command and Control System (SACCS), Automatic Digital Information Network (AUTODIN), Survivable Low Frequency Communications System (SLFCS) and Command Data Buffer (CDB) 1977 1 November - SATIN IV was effectively terminated by Congress. The restructured program was renamed SAC Digital Network (SACDIN), and was formulated to meet SAC's minimum essential data communications requirements, but also had the capability to grow in a modular fashion. 1986 ?? ??? - SACDIN replaces much of the SAC Automated Command and Control System (SACCS) and the SAC Automated Total Information Network (SATIN)

  Read more →
• 

  Reverse proxy

  In computer networks, a reverse proxy or surrogate server is a proxy server that appears to any client to be an ordinary web server, but in reality merely acts as an intermediary that forwards the client's requests to one or more ordinary web servers. Reverse proxies help increase scalability, performance, resilience, and security, but they also carry a number of risks. Companies that run web servers often set up reverse proxies to facilitate the communication between an Internet user's browser and the web servers. An important advantage of doing so is that the web servers can be hidden behind a firewall on a company-internal network, and only the reverse proxy needs to be directly exposed to the Internet. Reverse proxy servers are implemented in popular open-source web servers. Dedicated reverse proxy servers are used by some of the biggest websites on the Internet. A reverse proxy is capable of tracking IP addresses of requests that are relayed through it as well as reading and/or modifying any non-encrypted traffic. However, this implies that anyone who has compromised the server could do so as well. Reverse proxies differ from forward proxies, which are used when the client is restricted to a private, internal network and asks a forward proxy to retrieve resources from the public Internet. == Uses == Large websites and content delivery networks use reverse proxies, together with other techniques, to balance the load between internal servers. Reverse proxies can keep a cache of static content, which further reduces the load on these internal servers and the internal network. It is also common for reverse proxies to add features such as compression or TLS encryption to the communication channel between the client and the reverse proxy. Reverse proxies can inspect HTTP headers, which, for example, allows them to present a single IP address to the Internet while relaying requests to different internal servers based on the URL of the HTTP request. Reverse proxies can hide the existence and characteristics of origin servers. This can make it more difficult to determine the actual location of the origin server / website and, for instance, more challenging to initiate legal action such as takedowns or block access to the website, as the IP address of the website may not be immediately apparent. Additionally, the reverse proxy may be located in a different jurisdiction with different legal requirements, further complicating the takedown process. Application firewall features can protect against common web-based attacks, like a denial-of-service attack (DoS) or distributed denial-of-service attacks (DDoS). Without a reverse proxy, removing malware or initiating takedowns (while simultaneously dealing with the attack) on one's own site, for example, can be difficult. In the case of secure websites, a web server may not perform TLS encryption itself, but instead offload the task to a reverse proxy that may be equipped with TLS acceleration hardware. (See TLS termination proxy.) A reverse proxy can distribute the load from incoming requests to several servers, with each server supporting its own application area. In the case of reverse proxying web servers, the reverse proxy may have to rewrite the URL in each incoming request in order to match the relevant internal location of the requested resource. A reverse proxy can reduce load on its origin servers by caching static content and dynamic content, known as web acceleration. Proxy caches of this sort can often satisfy a considerable number of website requests, greatly reducing the load on the origin server(s). A reverse proxy can optimize content by compressing it in order to speed up loading times. In a technique named "spoon-feeding", a dynamically generated page can be produced in its entirety and served to the reverse proxy, which can feed the page to the client as the connection allows. The program that generates the page need not remain open, thus releasing server resources during the possibly extended time the client requires to complete the transfer. Reverse proxies can operate wherever multiple web-servers must be accessible via a single public IP address. The web servers listen on different ports in the same machine, with the same local IP address or, possibly, on different machines with different local IP addresses. The reverse proxy analyzes each incoming request and delivers it to the right server within the local area network. Reverse proxies can perform A/B testing and multivariate testing without requiring application code to handle the logic of which version is served to a client. A reverse proxy can add access authentication to a web server that does not have any authentication. == Risks == When the transit traffic is encrypted and the reverse proxy needs to filter/cache/compress or otherwise modify or improve the traffic, the proxy first must decrypt and re-encrypt communications. This requires the proxy to possess the TLS certificate and its corresponding private key, extending the number of systems that can have access to non-encrypted data and making it a more valuable target for attackers. The vast majority of external data breaches happen either when hackers succeed in abusing an existing reverse proxy that was intentionally deployed by an organization, or when hackers succeed in converting an existing Internet-facing server into a reverse proxy server. Compromised or converted systems allow external attackers to specify where they want their attacks proxied to, enabling their access to internal networks and systems. Applications that were developed for the internal use of a company are not typically hardened to public standards and are not necessarily designed to withstand all hacking attempts. When an organization allows external access to such internal applications via a reverse proxy, they might unintentionally increase their own attack surface and invite hackers. If a reverse proxy is not configured to filter attacks or it does not receive daily updates to keep its attack signature database up to date, a zero-day vulnerability can pass through unfiltered, enabling attackers to gain control of the system(s) that are behind the reverse proxy server. Giving the reverse proxy of a third party access to private keys (for caching or optimizing content) places the entire triad of confidentiality, integrity and availability in the hands of the third party who operates the proxy. A reverse proxy is a single point of failure for the back-end services it fronts: an outage caused by misconfiguration, a denial-of-service attack, or a software fault can make every fronted service unreachable to outside clients, even when the back-end services themselves remain healthy. For example, a 2020 outage at Cloudflare briefly took down major sites and services that relied on its reverse-proxy edge, including Discord.

  Read more →
• 

  Instant messaging

  Instant messaging (IM) technology is a type of synchronous computer-mediated communication involving the immediate (real-time) transmission of messages between two or more parties over the Internet or another computer network. Originally involving simple text message exchanges, modern instant messaging applications and services (also variously known as instant messenger, messaging app, chat app, chat client, or simply a messenger) tend to also feature the exchange of multimedia, emojis, file transfer, VoIP (voice calling), and video chat capabilities. Instant messaging systems facilitate connections between specified known users (often using a contact list also known as a "buddy list" or "friend list") or in chat rooms, and can be standalone apps or integrated into a wider social media platform, or in a website where it can, for instance, be used for conversational commerce. Originally the term "instant messaging" was distinguished from "text messaging" by being run on a computer network instead of a cellular/mobile network, being able to write longer messages, real-time communication, presence ("status"), and being free (only cost of access instead of per SMS message sent). Instant messaging was pioneered in the early Internet era; the IRC protocol was the earliest to achieve wide adoption. Later in the 1990s, ICQ was among the first closed and commercialized instant messengers, and several rival services appeared afterwards as it became a popular use of the Internet. Beginning with its first introduction in 2005, BlackBerry Messenger became the first popular example of mobile-based IM, combining features of traditional IM and mobile SMS. Instant messaging remains very popular today; IM apps are the most widely used smartphone apps: in 2018 for instance there were 980 million monthly active users of WeChat and 1.3 billion monthly users of WhatsApp, the largest IM network. == Overview == Instant messaging (IM), sometimes also called "messaging" or "texting", consists of computer-based human communication between two users (private messaging) or more (chat room or "group") in real-time, allowing immediate receipt of acknowledgment or reply. This is in direct contrast to email, where conversations are not in real-time, and the perceived quasi-synchrony of the communications by the users (although many systems allow users to send offline messages that the other user receives when logging in). Earlier IM networks were limited to text-based communication, not dissimilar to mobile text messaging. As technology has moved forward, IM has expanded to include voice calling using a microphone, videotelephony using webcams, file transfer, location sharing, image and video transfer, voice notes, and other features. IM is conducted over the Internet or other types of networks (see also LAN messenger). Depending on the IM protocol, the technical architecture can be peer-to-peer (direct point-to-point transmission) or client–server (when all clients have to first connect to the central server). Primary IM services are controlled by their corresponding companies and usually follow the client-server model. At one point, the term "Instant Messenger" was a service mark of AOL Time Warner and could not be used in software not affiliated with AOL in the United States. For this reason, in April 2007, the instant messaging client formerly named Gaim (or gaim) announced that they would be renamed "Pidgin". === Clients === Modern IM services generally provide their own client, either a separately installed application or a browser-based client. They are normally centralised networks run by the servers of the platform's operators, unlike peer-to-peer protocols like XMPP. These usually only work within the same IM network, although some allow limited function with other services (see #Interoperability). Third-party client software applications exist that will connect with most of the major IM services. There is the class of instant messengers that uses the serverless model, which doesn't require servers, and the IM network consists only of clients. There are several serverless messengers: RetroShare, Tox, Bitmessage, Ricochet. See also: LAN messenger. Some examples of popular IM services today include Signal, Telegram, WhatsApp Messenger, WeChat, QQ Messenger, Viber, Line, and Snapchat. The popularity of certain apps greatly differ between different countries. Certain apps have an emphasis on certain uses - for example, Skype focuses on video calling, Slack focuses on messaging and file sharing for work teams, and Snapchat focuses on image messages. Some social networking services offer messaging services as a component of their overall platform, such as Facebook's Facebook Messenger, who also own WhatsApp. Others have a direct IM function as an additional adjunct component of their social networking platforms, like Instagram, Reddit, Tumblr, TikTok, Clubhouse and Twitter; this also includes for example dating websites, such as OkCupid or Plenty of Fish, and online gaming chat platforms. === Features === ==== Private and group messaging ==== Private chat allows users to converse privately with another person or a group. Privacy can also be enhanced in several ways, such as end-to-end encryption by default. Public and group chat features allow users to communicate with multiple people simultaneously. ==== Calling ==== Many major IM services and applications offer a call feature for user-to-user voice calls, conference calls, and voice messages. The call functionality is useful for professionals who utilize the application for work purposes and as a hands-free method. Videotelephony using a webcam is also possible by some. ==== Games and entertainment ==== Some IM applications include in-app games for entertainment. Yahoo! Messenger, for example, introduced these where users could play a game and viewed by friends in real-time. MSN Messenger featured a number of playable games within the interface. Facebook's Messenger has had a built-in option to play games with people in a chat, including games like Tetris and Blackjack. Discord features multiple games built inside the "activities" tab in voice channels. ==== Payments ==== A relatively new feature to instant messaging, peer-to-peer payments are available for financial tasks on top of communication. The lack of a service fee also makes these advantageous to financial applications. IM services such as Facebook Messenger and the WeChat 'super-app' for example offer a payment feature. == History == === Early systems === Though the term dates from the 1990s, instant messaging predates the Internet, first appearing on multi-user operating systems like Compatible Time-Sharing System (CTSS) and Multiplexed Information and Computing Service (Multics) in the mid-1960s. Initially, some of these systems were used as notification systems for services like printing, but quickly were used to facilitate communication with other users logged into the same machine. CTSS facilitated communication via text message for up to 30 people. Parallel to instant messaging were early online chat facilities, the earliest of which was Talkomatic (1973) on the PLATO system, which allowed 5 people to chat simultaneously on a 512 x 512 plasma display (5 lines of text + 1 status line per person). During the bulletin board system (BBS) phenomenon that peaked during the 1980s, some systems incorporated chat features which were similar to instant messaging; Freelancin' Roundtable was one prime example. The first such general-availability commercial online chat service (as opposed to PLATO, which was educational) was the CompuServe CB Simulator in 1980, created by CompuServe executive Alexander "Sandy" Trevor in Columbus, Ohio. As networks developed, the protocols spread with the networks. Some of these used a peer-to-peer protocol (e.g. talk, ntalk and ytalk), while others required peers to connect to a server (see talker and IRC). The Zephyr Notification Service (still in use at some institutions) was invented at MIT's Project Athena in the 1980s to allow service providers to locate and send messages to users. Early instant messaging programs were primarily real-time text, where characters appeared as they were typed. This includes the Unix "talk" command line program, which was popular in the 1980s and early 1990s. Some BBS chat programs (i.e. Celerity BBS) also used a similar interface. Modern implementations of real-time text also exist in instant messengers, such as AOL's Real-Time IM as an optional feature. In the latter half of the 1980s and into the early 1990s, the Quantum Link online service for Commodore 64 computers offered user-to-user messages between concurrently connected customers, which they called "On-Line Messages" (or OLM for short), and later "FlashMail." Quantum Link later became America Online and made AOL Instant Messenger (AIM, discussed later). While the Quantum Link client software ran on a Commodore 64, using only

  Read more →
• 

  Scientific Working Group – Imaging Technology

  The Scientific Working Group on Imaging Technology was convened by the Federal Bureau of Investigation in 1997 to provide guidance to law enforcement agencies and others in the criminal justice system regarding the best practices for photography, videography, and video and image analysis. This group was terminated in 2015. == History == As technology has advanced through the years, law enforcement has needed to stay abreast of emerging technological advances and use these in the investigation of crime. A factor that is considered when new technology is used in these investigations is the determination of whether the use of that new technology will be admissible in court. The judicial system in the United States currently has two standards used in the determination of admissibility of testimony regarding scientific evidence; the Daubert Standard and the Frye Standard. These standards guide the courts in the admissibility of testimony derived from the use of new technologies and scientific techniques. The Federal Bureau of Investigation (FBI), seeking to address possible admissibility issues with such testimony, established Scientific Working Groups starting with the Scientific Working Group on DNA Analysis and Methods (SWGDAM) in 1988. The goal of these groups is to open lines of communication between law enforcement agencies and forensic laboratories around the world while providing guidance on the use of new and innovative technologies and techniques. This guidance can lead to admissibility of evidence and/or testimony, provided proper methods in the collection of evidence and its analysis are employed. In 2009, the National Academy of Sciences released a report entitled, "Strengthening Forensic Science in the United States: A Path Forward." This report addresses many topics including challenges and disparities facing the forensic science community, standardization, certification of practitioners and accreditation of their respective entities, problems related to the interpretation of forensic evidence, the need for research, and the admission of forensic science evidence in litigation. This report mentions the Scientific Working Groups and their role in forensic science. The history of imaging technology (photography) can be said to extend back to the times of Chinese philosopher Mo-Ti (470-390 B.C.) who described the principles behind the precursor to the camera obscura. Since that time, advances in imaging technology include the discovery of chemical photographic processes in the 19th century and the use of electronic imaging technology that includes analog video cameras and digital video and still cameras. By the mid 1990s, it was apparent that technologically advanced camera systems such as these were being adopted for use in the criminal justice system. This led the FBI to convene a meeting of individuals working in the field of forensic imaging from federal, state, local, and foreign law enforcement, and the U.S. military, during the summer of 1997. As a result of this meeting, the Technical Working Group on Imaging Technology was formed from a core group of the meeting’s participants. This group later became the Scientific Working Group on Imaging Technology (SWGIT). Prior to the inception of SWGIT, some law enforcement agencies began adopting digital imaging technology. Due to the lack of guidelines or standards, some of these agencies attempted to replace all their film cameras with substandard digital cameras, only to find that the equipment they had purchased was not capable of accomplishing the mission for which they were intended. At that time only low resolution digital cameras were deemed affordable by some law enforcement agencies. Some of these agencies were forced to rethink their photography procedures and reverted to the use of film cameras or replaced their low-resolution digital cameras with higher quality, more expensive equipment. Also lacking at this early stage was guidance on how to store and archive digital image files. When SWGIT was formed, it was tasked with providing guidance to law enforcement and others in the criminal justice system by releasing documents that describe the best practices and guidelines for the use of imaging technology, to include these concerns and many others. This group was terminated in 2015. == SWGIT Function == During its existence, SWGIT provided information on the appropriate use of various imaging technologies including both established and new. This was accomplished through the release of documents such as the SWGIT Best Practices documents. As changes in technology occurred, these documents were updated. Over the course of its existence, SWGIT collaborated with other Scientific Working Groups to address imaging concerns within their respective disciplines. SWGIT published over 20 documents that dealt specifically with imaging technology. SWGIT also co-published documents with the Scientific Working Group on Digital Evidence (SWGDE) that had a component or components dealing with imaging technology. SWGIT also provided imaging technology guidance and input for documents from the Scientific Working Group on Friction Ridge Analysis, Study and Technology (SWGFAST), the Scientific Working Group for Forensic Document Examination (SWGDOC), and the Scientific Working Group on Shoeprint and Tire Tread Evidence (SWGTREAD). SWGIT assisted the American Society of Crime Lab Directors/Laboratory Accreditation Board (ASCLD/LAB) in the writing of definitions and standards for the accreditation of Digital and Multimedia Evidence sections of crime laboratories. In addition to releasing documents, SWGIT members disseminated best practices for law enforcement professionals where imaging technology was concerned. This was carried out by attending and lecturing at meetings and conferences of various forensic organizations that included: The American Academy of Forensic Sciences (AAFS) The International Association for Identification (IAI) The Law Enforcement and Emergency Services Video Association (LEVA) The American Society of Crime Lab Directors (ASCLD) The SWGIT membership consisted of approximately fifty scientists, photographers, instructors, and managers from more than two dozen federal, state, and local law enforcement agencies, as well as from the academic and research communities. The membership elected its officers from within. SWGIT was composed of the Executive Committee, four standing subcommittees, and ad hoc subcommittees appointed on an as-needed basis. The standing subcommittees were: Image Analysis, Forensic Photography, Video, and Outreach. This group was terminated in 2015. == Legal Proceedings == The following court cases have conducted Daubert v. Merrell Dow Pharm., Inc., 509 U.S. 579 (1993) hearings in which SWGIT best practice documents have been cited as accepted protocol, methodology, and as generally accepted techniques in the forensic community: U. S. v. Rudy Frabizio, U.S. District Court, Boston, MA, 2008 (Image Authentication) U.S. v. Nobumochi Furukawa, U.S. District Court, Minnesota, 2007 (Video Authentication) U.S. v. John Stroman, U.S. District Court, South Carolina, 2007 (Facial Comparison Analysis) State of Texas v. Daniel Day, Tarrant County Texas, 2005 (Camera Identification to Images) U.S. v. Marc Watzman, U.S. District Court, Northern Illinois, 2004 (Video Authentication) U.S. v. McKreith, U.S. District Court, Fort Lauderdale, FL, 2002 (Photo comparison of shirt) == Termination == This group was unfunded by the FBI in 2015.

  Read more →
• 

  Trusted Computing

  Trusted Computing (TC) is a technology developed and promoted by the Trusted Computing Group. The term is taken from the field of trusted systems and has a specialized meaning that is distinct from the field of confidential computing. With Trusted Computing, the computer will consistently behave in expected ways, and those behaviors will be enforced by computer hardware and software. Enforcing this behavior is achieved by loading the hardware with a unique encryption key that is inaccessible to the rest of the system and the owner. TC is controversial as the hardware is not only secured for its owner, but also against its owner, leading opponents of the technology like free software activist Richard Stallman to deride it as "treacherous computing", and certain scholarly articles to use scare quotes when referring to the technology. Trusted Computing proponents such as International Data Corporation, the Enterprise Strategy Group and Endpoint Technologies Associates state that the technology will make computers safer, less prone to viruses and malware, and thus more reliable from an end-user perspective. They also state that Trusted Computing will allow computers and servers to offer improved computer security over that which is currently available. Opponents often state that this technology will be used primarily to enforce digital rights management policies (imposed restrictions to the owner) and not to increase computer security. Chip manufacturers Intel and AMD, hardware manufacturers such as HP and Dell, and operating system providers such as Microsoft include Trusted Computing in their products if enabled. The U.S. Army requires that every new PC it purchases comes with a Trusted Platform Module (TPM). As of July 3, 2007, so does virtually the entire United States Department of Defense. == Key concepts == Trusted Computing encompasses six key technology concepts, of which all are required for a fully Trusted system, that is, a system compliant to the TCG specifications: Endorsement key Secure input and output Memory curtaining / protected execution Sealed storage Remote attestation Trusted Third Party (TTP) === Endorsement key === The endorsement key is a 2048-bit RSA public and private key pair that is created randomly on the chip at manufacture time and cannot be changed. The private key never leaves the chip, while the public key is used for attestation and for encryption of sensitive data sent to the chip, as occurs during the TPM_TakeOwnership command. This key is used to allow the execution of secure transactions: every Trusted Platform Module (TPM) is required to be able to sign a random number (in order to allow the owner to show that he has a genuine trusted computer), using a particular protocol created by the Trusted Computing Group (the direct anonymous attestation protocol) in order to ensure its compliance of the TCG standard and to prove its identity; this makes it impossible for a software TPM emulator with an untrusted endorsement key (for example, a self-generated one) to start a secure transaction with a trusted entity. The TPM should be designed to make the extraction of this key by hardware analysis hard, but tamper resistance is not a strong requirement. === Memory curtaining === Memory curtaining extends common memory protection techniques to provide full isolation of sensitive areas of memory—for example, locations containing cryptographic keys. Even the operating system does not have full access to curtained memory. The exact implementation details are vendor specific. === Sealed storage === Sealed storage protects private information by binding it to platform configuration information including the software and hardware being used. This means the data can be released only to a particular combination of software and hardware. Sealed storage can be used for DRM enforcing. For example, users who keep a song on their computer that has not been licensed to be listened will not be able to play it. Currently, a user can locate the song, listen to it, and send it to someone else, play it in the software of their choice, or back it up (and in some cases, use circumvention software to decrypt it). Alternatively, the user may use software to modify the operating system's DRM routines to have it leak the song data once, say, a temporary license was acquired. Using sealed storage, the song is securely encrypted using a key bound to the trusted platform module so that only the unmodified and untampered music player on his or her computer can play it. In this DRM architecture, this might also prevent people from listening to the song after buying a new computer, or upgrading parts of their current one, except after explicit permission of the vendor of the song. === Remote attestation === Remote attestation allows changes to the user's computer to be detected by authorized parties. For example, software companies can identify unauthorized changes to software, including users modifying their software to circumvent commercial digital rights restrictions. It works by having the hardware generate a certificate stating what software is currently running. The computer can then present this certificate to a remote party to show that unaltered software is currently executing. Numerous remote attestation schemes have been proposed for various computer architectures, including Intel, RISC-V, and ARM. Remote attestation is usually combined with public-key encryption so that the information sent can only be read by the programs that requested the attestation, and not by an eavesdropper. To take the song example again, the user's music player software could send the song to other machines, but only if they could attest that they were running an authorized copy of the music player software. Combined with the other technologies, this provides a more restricted path for the music: encrypted I/O prevents the user from recording it as it is transmitted to the audio subsystem, memory locking prevents it from being dumped to regular disk files as it is being worked on, sealed storage curtails unauthorized access to it when saved to the hard drive, and remote attestation prevents unauthorized software from accessing the song even when it is used on other computers. To preserve the privacy of attestation responders, Direct Anonymous Attestation has been proposed as a solution, which uses a group signature scheme to prevent revealing the identity of individual signers. Proof of space (PoS) have been proposed to be used for malware detection, by determining whether the L1 cache of a processor is empty (e.g., has enough space to evaluate the PoSpace routine without cache misses) or contains a routine that resisted being evicted. === Trusted third party === == Known applications == The Microsoft products Windows Vista, Windows 7, Windows 8 and Windows RT make use of a Trusted Platform Module to facilitate BitLocker Drive Encryption. Other known applications with runtime encryption and the use of secure enclaves include the Signal messenger and the e-prescription service ("E-Rezept") by the German government. == Possible applications == === Digital rights management === Trusted Computing would allow companies to create a digital rights management (DRM) system which would be very hard to circumvent, though not impossible. An example is downloading a music file. Sealed storage could be used to prevent the user from opening the file with an unauthorized player or computer. Remote attestation could be used to authorize play only by music players that enforce the record company's rules. The music would be played from curtained memory, which would prevent the user from making an unrestricted copy of the file while it is playing, and secure I/O would prevent capturing what is being sent to the sound system. Circumventing such a system would require either manipulation of the computer's hardware, capturing the analogue (and thus degraded) signal using a recording device or a microphone, or breaking the security of the system. New business models for use of software (services) over Internet may be boosted by the technology. By strengthening the DRM system, one could base a business model on renting programs for a specific time periods or "pay as you go" models. For instance, one could download a music file which could only be played a certain number of times before it becomes unusable, or the music file could be used only within a certain time period. === Preventing cheating in online games === Trusted Computing could be used to combat cheating in online games. Some players modify their game copy in order to gain unfair advantages in the game; remote attestation, secure I/O and memory curtaining could be used to determine that all players connected to a server were running an unmodified copy of the software. === Verification of remote computation for grid computing === Trusted Computing could be used to guarantee participants in a grid computing sys

  Read more →
• 

  Data grid

  A data grid is an architecture or set of services that allows users to access, modify and transfer extremely large amounts of geographically distributed data for research purposes. Data grids make this possible through a host of middleware applications and services that pull together data and resources from multiple administrative domains and then present it to users upon request. The data in a data grid can be located at a single site or multiple sites where each site can be its own administrative domain governed by a set of security restrictions as to who may access the data. Likewise, multiple replicas of the data may be distributed throughout the grid outside their original administrative domain and the security restrictions placed on the original data for who may access it must be equally applied to the replicas. Specifically developed data grid middleware is what handles the integration between users and the data they request by controlling access while making it available as efficiently as possible. == Middleware == Middleware provides all the services and applications necessary for efficient management of datasets and files within the data grid while providing users quick access to the datasets and files. There is a number of concepts and tools that must be available to make a data grid operationally viable. However, at the same time not all data grids require the same capabilities and services because of differences in access requirements, security and location of resources in comparison to users. In any case, most data grids will have similar middleware services that provide for a universal name space, data transport service, data access service, data replication and resource management service. When taken together, they are key to the data grids functional capabilities. === Universal namespace === Since sources of data within the data grid will consist of data from multiple separate systems and networks using different file naming conventions, it would be difficult for a user to locate data within the data grid and know they retrieved what they needed based solely on existing physical file names (PFNs). A universal or unified name space makes it possible to create logical file names (LFNs) that can be referenced within the data grid that map to PFNs. When an LFN is requested or queried, all matching PFNs are returned to include possible replicas of the requested data. The end user can then choose from the returned results the most appropriate replica to use. This service is usually provided as part of a management system known as a Storage Resource Broker (SRB). Information about the locations of files and mappings between the LFNs and PFNs may be stored in a metadata or replica catalogue. The replica catalogue would contain information about LFNs that map to multiple replica PFNs. === Data transport service === Another middleware service is that of providing for data transport or data transfer. Data transport will encompass multiple functions that are not just limited to the transfer of bits, to include such items as fault tolerance and data access. Fault tolerance can be achieved in a data grid by providing mechanisms that ensures data transfer will resume after each interruption until all requested data is received. There are multiple possible methods that might be used to include starting the entire transmission over from the beginning of the data to resuming from where the transfer was interrupted. As an example, GridFTP provides for fault tolerance by sending data from the last acknowledged byte without starting the entire transfer from the beginning. The data transport service also provides for the low-level access and connections between hosts for file transfer. The data transport service may use any number of modes to implement the transfer to include parallel data transfer where two or more data streams are used over the same channel or striped data transfer where two or more steams access different blocks of the file for simultaneous transfer to also using the underlying built-in capabilities of the network hardware or specifically developed protocols to support faster transfer speeds. The data transport service might optionally include a network overlay function to facilitate the routing and transfer of data as well as file I/O functions that allow users to see remote files as if they were local to their system. The data transport service hides the complexity of access and transfer between the different systems to the user so it appears as one unified data source. === Data access service === Data access services work hand in hand with the data transfer service to provide security, access controls and management of any data transfers within the data grid. Security services provide mechanisms for authentication of users to ensure they are properly identified. Common forms of security for authentication can include the use of passwords or Kerberos (protocol). Authorization services are the mechanisms that control what the user is able to access after being identified through authentication. Common forms of authorization mechanisms can be as simple as file permissions. However, need for more stringent controlled access to data is done using Access Control Lists (ACLs), Role-Based Access Control (RBAC) and Tasked-Based Authorization Controls (TBAC). These types of controls can be used to provide granular access to files to include limits on access times, duration of access to granular controls that determine which files can be read or written to. The final data access service that might be present to protect the confidentiality of the data transport is encryption. The most common form of encryption for this task has been the use of SSL while in transport. While all of these access services operate within the data grid, access services within the various administrative domains that host the datasets will still stay in place to enforce access rules. The data grid access services must be in step with the administrative domains access services for this to work. === Data replication service === To meet the needs for scalability, fast access and user collaboration, most data grids support replication of datasets to points within the distributed storage architecture. The use of replicas allows multiple users faster access to datasets and the preservation of bandwidth since replicas can often be placed strategically close to or within sites where users need them. However, replication of datasets and creation of replicas is bound by the availability of storage within sites and bandwidth between sites. The replication and creation of replica datasets is controlled by a replica management system. The replica management system determines user needs for replicas based on input requests and creates them based on availability of storage and bandwidth. All replicas are then cataloged or added to a directory based on the data grid as to their location for query by users. In order to perform the tasks undertaken by the replica management system, it needs to be able to manage the underlying storage infrastructure. The data management system will also ensure the timely updates of changes to replicas are propagated to all nodes. ==== Replication update strategy ==== There are a number of ways the replication management system can handle the updates of replicas. The updates may be designed around a centralized model where a single master replica updates all others, or a decentralized model, where all peers update each other. The topology of node placement may also influence the updates of replicas. If a hierarchy topology is used then updates would flow in a tree like structure through specific paths. In a flat topology it is entirely a matter of the peer relationships between nodes as to how updates take place. In a hybrid topology consisting of both flat and hierarchy topologies updates may take place through specific paths and between peers. ==== Replication placement strategy ==== There are a number of ways the replication management system can handle the creation and placement of replicas to best serve the user community. If the storage architecture supports replica placement with sufficient site storage, then it becomes a matter of the needs of the users who access the datasets and a strategy for placement of replicas. There have been numerous strategies proposed and tested on how to best manage replica placement of datasets within the data grid to meet user requirements. There is not one universal strategy that fits every requirement the best. It is a matter of the type of data grid and user community requirements for access that will determine the best strategy to use. Replicas can even be created where the files are encrypted for confidentiality that would be useful in a research project dealing with medical files. The following section contains several strategies for replica placement. ===== Dynamic replication ===== Dynam

  Read more →
• 

  Bus encryption

  Bus encryption is the use of encrypted program instructions on a data bus in a computer that includes a secure cryptoprocessor for executing the encrypted instructions. Bus encryption is used primarily in electronic systems that require high security, such as automated teller machines, TV set-top boxes, and secure data communication devices such as two-way digital radios. Bus encryption can also mean encrypted data transmission on a data bus from one processor to another processor. For example, from the CPU to a GPU which does not require input of encrypted instructions. Such bus encryption is used by Windows Vista and newer Microsoft operating systems to protect certificates, BIOS, passwords, and program authenticity. PVP-UAB (Protected Video Path) provides bus encryption of premium video content in PCs as it passes over the PCIe bus to graphics cards to enforce digital rights management. The need for bus encryption arises when multiple people have access to the internal circuitry of an electronic system, either because they service and repair such systems, stock spare components for the systems, own the system, steal the system, or find a lost or abandoned system. Bus encryption is necessary not only to prevent tampering of encrypted instructions that may be easily discovered on a data bus or during data transmission, but also to prevent discovery of decrypted instructions that may reveal security weaknesses that an intruder can exploit. In TV set-top boxes, it is necessary to download program instructions periodically to customer's units to provide new features and to fix bugs. These new instructions are encrypted before transmission, but must also remain secure on data buses and during execution to prevent the manufacture of unauthorized cable TV boxes. This can be accomplished by secure crypto-processors that read encrypted instructions on the data bus from external data memory, decrypt the instructions in the cryptoprocessor, and execute the instructions in the same cryptoprocessor.

  Read more →
• 

  Spreading activation

  Spreading activation is a method for searching associative networks, biological and artificial neural networks, or semantic networks. The search process is initiated by labeling a set of source nodes (e.g. concepts in a semantic network) with weights or "activation" and then iteratively propagating or "spreading" that activation out to other nodes linked to the source nodes. Most often these "weights" are real values that decay as activation propagates through the network. When the weights are discrete this process is often referred to as marker passing. Activation may originate from alternate paths, identified by distinct markers, and terminate when two alternate paths reach the same node. However brain studies show that several different brain areas play an important role in semantic processing. Spreading activation in semantic networks as a model were invented in cognitive psychology to model the fan out effect. Spreading activation can also be applied in information retrieval, by means of a network of nodes representing documents and terms contained in those documents. == Cognitive psychology == As it relates to cognitive psychology, spreading activation is the theory of how the brain iterates through a network of associated ideas to retrieve specific information. The spreading activation theory presents the array of concepts within our memory as cognitive units, each consisting of a node and its associated elements or characteristics, all connected together by edges. A spreading activation network can be represented schematically, in a sort of web diagram with shorter lines between two nodes meaning the ideas are more closely related and will typically be associated more quickly to the original concept. In memory psychology, the spreading activation model holds that people organize their knowledge of the world based on their personal experiences, which in turn form the network of ideas that is the person's knowledge of the world. When a word (the target) is preceded by an associated word (the prime) in word recognition tasks, participants seem to perform better in the amount of time that it takes them to respond. For instance, subjects respond faster to the word "doctor" when it is preceded by "nurse" than when it is preceded by an unrelated word like "carrot". This semantic priming effect with words that are close in meaning within the cognitive network has been seen in a wide range of tasks given by experimenters, ranging from sentence verification to lexical decision and naming. As another example, if the original concept is "red" and the concept "vehicles" is primed, they are much more likely to say "fire engine" instead of something unrelated to vehicles, such as "cherries". If instead "fruits" was primed, they would likely name "cherries" and continue on from there. The activation of pathways in the network has everything to do with how closely linked two concepts are by meaning, as well as how a subject is primed. == Algorithm == A directed graph is populated by Nodes[ 1...N ] each having an associated activation value A [ i ] which is a real number in the range [0.0 ... 1.0]. A Link[ i, j ] connects source node[ i ] with target node[ j ]. Each edge has an associated weight W [ i, j ] usually a real number in the range [0.0 ... 1.0]. Parameters: Firing threshold F, a real number in the range [0.0 ... 1.0] Decay factor D, a real number in the range [0.0 ... 1.0] Steps: Initialize the graph setting all activation values A [ i ] to zero. Set one or more origin nodes to an initial activation value greater than the firing threshold F. A typical initial value is 1.0. For each unfired node [ i ] in the graph having an activation value A [ i ] greater than the node firing threshold F: For each Link [ i, j ] connecting the source node [ i ] with target node [ j ], adjust A [ j ] = A [ j ] + (A [ i ] W [ i, j ] D) where D is the decay factor. If a target node receives an adjustment to its activation value so that it would exceed 1.0, then set its new activation value to 1.0. Likewise maintain 0.0 as a lower bound on the target node's activation value should it receive an adjustment to below 0.0. Once a node has fired it may not fire again, although variations of the basic algorithm permit repeated firings and loops through the graph. Nodes receiving a new activation value that exceeds the firing threshold F are marked for firing on the next spreading activation cycle. If activation originates from more than one node, a variation of the algorithm permits marker passing to distinguish the paths by which activation is spread over the graph The procedure terminates when either there are no more nodes to fire or in the case of marker passing from multiple origins, when a node is reached from more than one path. Variations of the algorithm that permit repeated node firings and activation loops in the graph, terminate after a steady activation state, with respect to some delta, is reached, or when a maximum number of iterations is exceeded. == Examples ==

  Read more →
• 

  Codebook

  A codebook is a type of document used for gathering and storing cryptography codes. Originally, codebooks were often literally books, but today "codebook" is a byword for the complete record of a series of codes, regardless of physical format. == Cryptography == In cryptography, a codebook is a document used for implementing a code. A codebook contains a lookup table for coding and decoding; each word or phrase has one or more strings which replace it. To decipher messages written in code, corresponding copies of the codebook must be available at either end. The distribution and physical security of codebooks presents a special difficulty in the use of codes compared to the secret information used in ciphers, the key, which is typically much shorter. The United States National Security Agency documents sometimes use codebook to refer to block ciphers; compare their use of combiner-type algorithm to refer to stream ciphers. Codebooks come in two forms, one-part or two-part: In one-part codes, the plaintext words and phrases and the corresponding code words are in the same alphabetical order. They are organized similar to a standard dictionary. Such codes are half the size of two-part codes but are more vulnerable since an attacker who recovers some code word meanings can often infer the meaning of nearby code words. One-part codes may be used simply to shorten messages for transmission or have their security enhanced with superencryption methods, such as adding a secret number to numeric code words. In two-part codes, one part is for converting plaintext to ciphertext, the other for the opposite purpose. They are usually organized similarly to a language translation dictionary, with plaintext words (in the first part) and ciphertext words (in the second part) presented like dictionary headwords. The earliest known use of a codebook system was by Gabriele de Lavinde in 1379 working for the Antipope Clement VII. Two-part codebooks go back as least as far as Antoine Rossignol in the 1800s. From the 15th century until the middle of the 19th century, nomenclators (named after nomenclator) were the most used cryptographic method. Codebooks with superencryption were the most used cryptographic method of World War I. The JN-25 code used in World War II used a codebook of 30,000 code groups superencrypted with 30,000 random additives. The book used in a book cipher or the book used in a running key cipher can be any book shared by sender and receiver and is different from a cryptographic codebook. == Social sciences == In social sciences, a codebook is a document containing a list of the codes used in a set of data to refer to variables and their values, for example locations, occupations, or clinical diagnoses. == Data compression == Codebooks were also used in 19th- and 20th-century commercial codes for the non-cryptographic purpose of data compression. Codebooks are used in relation to precoding and beamforming in mobile networks such as 5G and LTE. The usage is standardized by 3GPP, for example in the document TS 38.331, NR; Radio Resource Control (RRC); Protocol specification.

  Read more →
• 

  Ultra (cryptography)

  Ultra was the designation adopted by British military intelligence in June 1941 for wartime signals intelligence obtained by breaking high-level encrypted enemy radio and teleprinter communications at the Government Code and Cypher School (GC&CS) at Bletchley Park. Ultra eventually became the standard designation among the western Allies for all such intelligence. The name arose because the intelligence obtained was considered more important than that designated by the highest British security classification then used (Most Secret) and so was regarded as being Ultra Secret. Several other cryptonyms had been used for such intelligence. The code name "Boniface" was used as a cover name for Ultra. In order to ensure that the successful code-breaking did not become apparent to the Germans, British intelligence created a fictional MI6 master spy, Boniface, who controlled a fictional series of agents throughout Germany. Information obtained through code-breaking was often attributed to the human intelligence from the Boniface network. The U.S. used the codename Magic for its decrypts from Japanese sources, including the "Purple" cipher. Much of the German cipher traffic was encrypted on the Enigma machine. Used properly, the German military Enigma would have been virtually unbreakable; in practice, shortcomings in operation allowed it to be broken. The term "Ultra" has often been used almost synonymously with "Enigma decrypts". However, Ultra also encompassed decrypts of the German Lorenz SZ 40/42 machines that were used by the German High Command, and the Hagelin machine. Many observers, at the time and later, regarded Ultra as immensely valuable to the Allies. Winston Churchill was reported to have told King George VI, when presenting to him Stewart Menzies (head of the Secret Intelligence Service and the person who controlled distribution of Ultra decrypts to the government): "It is thanks to the secret weapon of General Menzies, put into use on all the fronts, that we won the war!" F. W. Winterbotham quoted the western Supreme Allied Commander, Dwight D. Eisenhower, at war's end describing Ultra as having been "decisive" to Allied victory. Sir Harry Hinsley, Bletchley Park veteran and official historian of British Intelligence in World War II, made a similar assessment of Ultra, saying that while the Allies would have won the war without it, "the war would have been something like two years longer, perhaps three years longer, possibly four years longer than it was." However, Hinsley and others have emphasized the difficulties of counterfactual history in attempting such conclusions, and some historians, such as John Keegan, have said the shortening might have been as little as the three months it took the United States to deploy the atomic bomb. == Sources of intelligence == Most Ultra intelligence was derived from reading radio messages that had been encrypted with cipher machines, complemented by material from radio communications using traffic analysis and direction finding. In the early phases of the war, particularly during the eight-month Phoney War, the Germans could transmit most of their messages using land lines and so had no need to use radio. This meant that those at Bletchley Park had some time to build up experience of collecting and starting to decrypt messages on the various radio networks. German Enigma messages were the main source, with those of the German air force (the Luftwaffe) predominating, as they used radio more and their operators were particularly ill-disciplined. === German === ==== Enigma ==== "Enigma" refers to a family of electro-mechanical rotor cipher machines. These produced a polyalphabetic substitution cipher and were widely thought to be unbreakable in the 1920s, when a variant of the commercial Model D was first used by the Reichswehr. The German Army (Heer), Navy, Air Force, Nazi party, Gestapo and German diplomats used Enigma machines in several variants. Abwehr (German military intelligence) used a four-rotor machine without a plugboard and Naval Enigma used different key management from that of the army or air force, making its traffic far more difficult to cryptanalyse; each variant required different cryptanalytic treatment. The commercial versions were not as secure and Dilly Knox of GC&CS is said to have broken one before the war. German military Enigma was first broken in December 1932 by Marian Rejewski and the Polish Cipher Bureau, using a combination of brilliant mathematics, the services of a spy in the German office responsible for administering encrypted communications, and good luck. The Poles read Enigma to the outbreak of World War II and beyond, in France. At the turn of 1939, the Germans made the systems ten times more complex, which required a tenfold increase in Polish decryption equipment, which they could not meet. On 25 July 1939, the Polish Cipher Bureau handed reconstructed Enigma machines and their techniques for decrypting ciphers to the French and British. Gordon Welchman wrote, Ultra would never have got off the ground if we had not learned from the Poles, in the nick of time, the details both of the German military Enigma machine, and of the operating procedures that were in use. At Bletchley Park, some of the key people responsible for success against Enigma included mathematicians Alan Turing and Hugh Alexander and, at the British Tabulating Machine Company, chief engineer Harold Keen. After the war, interrogation of German cryptographic personnel led to the conclusion that German cryptanalysts understood that cryptanalytic attacks against Enigma were possible but were thought to require impracticable amounts of effort and investment. The Poles' early start at breaking Enigma and the continuity of their success gave the Allies an advantage when World War II began. ==== Lorenz cipher ==== In June 1941, the Germans started to introduce on-line stream cipher teleprinter systems for strategic point-to-point radio links, to which the British gave the code-name Fish. Several systems were used, principally the Lorenz SZ 40/42 (codenamed "Tunny" by the British) and Geheimfernschreiber ("Sturgeon"). These cipher systems were cryptanalysed, particularly Tunny, which the British thoroughly penetrated. It was eventually attacked using Colossus machines, which were the first digital programme-controlled electronic computers. In many respects the Tunny work was more difficult than for the Enigma, since the British codebreakers had no knowledge of the machine producing it and no head-start such as that the Poles had given them against Enigma. Although the volume of intelligence derived from this system was much smaller than that from Enigma, its importance was often far higher because it produced primarily high-level, strategic intelligence that was sent between Wehrmacht high command (Oberkommando der Wehrmacht, OKW). The eventual bulk decryption of Lorenz-enciphered messages contributed significantly, and perhaps decisively, to the defeat of Nazi Germany. Nevertheless, the Tunny story has become much less well known among the public than the Enigma one. At Bletchley Park, some of the key people responsible for success in the Tunny effort included mathematicians W. T. "Bill" Tutte and Max Newman and electrical engineer Tommy Flowers. === Italian === In June 1940, the Italians were using book codes for most of their military messages, except for the Italian Navy, which in early 1941 had started using a version of the Hagelin rotor-based cipher machine C-38. This was broken from June 1941 onwards by the Italian subsection of GC&CS at Bletchley Park. === Japanese === In the Pacific theatre, a Japanese cipher machine, called "Purple" by the Americans, was used for highest-level Japanese diplomatic traffic. It produced a polyalphabetic substitution cipher, but unlike Enigma, was not a rotor machine, being built around electrical stepping switches. It was broken by the US Army Signal Intelligence Service and disseminated as Magic. Detailed reports by the Japanese ambassador to Germany were encrypted on the Purple machine. His reports included reviews of German assessments of the military situation, reviews of strategy and intentions, reports on direct inspections by the ambassador (in one case, of Normandy beach defences), and reports of long interviews with Hitler. The Japanese are said to have obtained an Enigma machine in 1937, although it is debated whether they were given it by the Germans or bought a commercial version, which, apart from the plugboard and internal wiring, was the German Heer/Luftwaffe machine. Having developed a similar machine, the Japanese did not use the Enigma machine for their most secret communications. The chief fleet communications code system used by the Imperial Japanese Navy was called JN-25 by the Americans, and by early 1942 the US Navy had made considerable progress in decrypting Japanese naval messages. The US Army also made progress on the

  Read more →
• 

  Kurzsignale

  The Short Signal Code, also known as the Short Signal Book (German: Kurzsignalbuch), was a short code system used by the Kriegsmarine (German Navy) during World War II to minimize the transmission duration of messages. == Description == The transmission of radio messages had the potential risks of revealing the submarine's presence and direction; if decoded the content was also revealed. Submarines need to provide information, mostly in standard form (position of convoy to attack and of submarine, weather information), to their bases. Initially Morse code transmissions could be used. To inhibit detection, the duration of messages needed to be minimised; for this, Kurzsignale short-coding was used. To prevent interception, messages needed to be encrypted by the Enigma machine. To shorten transmission even further, the message could be sent by a fast machine instead of a human radio operator. For example, the Kurier system – not implemented in time – decreased the time to send a Morse dot from around 50 milliseconds for a human to 1 millisecond. == Short Signal book == The Kurzsignale code was intended to shorten transmission time to below the time required to get a directional fix. It was not primarily intended to hide signal contents; protection was intended to be achieved by encoding with the Enigma machine. A copy of the Kurzsignale code book was captured from German submarine U-110 on 9 May 1941. In August 1941, Dönitz began addressing U-boats by the names of their commanders, instead of boat numbers. The method of defining U-boat meeting points in the Short Signal Book was regarded as compromised, so a method was defined by B-Dienst cryptanalysts to disguise their positions on the Kriegsmarine German Naval Grid System (German:Gradnetzmeldeverfahren) was introduced and used until the end of the war == Radio direction finding == Aware of the danger presented by radio direction finding (RDF), the Kriegsmarine developed various systems to speed up broadcast. The Kurzsignale code system condensed messages into short codes consisting of short sequences for common terms such as "convoy location" so that additional descriptions would not be needed in the message. The resulting Kurzsignal was then encoded with the Enigma machine and subsequently transmitted as rapidly as possible, typically taking about 20 seconds. Typical length of an information or weather signal was about 25 characters. Conventional RDF needed about a minute to fix the bearing of a radio signal, and the Kurzsignale protected against this. However, the huff-duff system which was in use by the Allies could cope with these short transmissions. The fully automated burst transmission Kurier system, in testing from August 1944, could send a Kurzsignal in not more than 460 milliseconds; this was short enough to prevent location even by huff-duff and, if deployed, would have been a serious setback for Allied anti-submarine and code-breaking activities. By late 1944 the Kurier program was a top priority, but the war ended before the system was operational. == Short Weather cipher == A similar coding system was used for weather reports from U-boats, the Wetterkurzschlüssel (Short Weather Cipher). Code books were captured from U-559 on 30 October 1942.

  Read more →
• 

  Something Big Is Happening

  "Something Big Is Happening" is an essay by Matt Shumer, an AI entrepreneur, about the impact of artificial intelligence, published in February 2026, that has since been reportedly viewed more than 80 million times and widely discussed. Shumer noted that the technology has crossed an important threshold, where AI has become capable of creating self-improving systems. Referring to one the most recent AI models, he wrote: "It was making intelligent decisions. It had something that felt, for the first time, like judgment. Like taste." Speaking to CNBC's Power Lunch, Shumer said that his "core message" is "people in the workforce should start to use and experiment with AI tools so they can understand what’s coming". Even as the essay was widely shared and discussed, the essay also elicited criticism. Paulo Carvao, in an essay published by the Forbes Magazine stated that some of his advice is sound, but added: "It reads at times like a sales pitch. He urges readers to subscribe to the most advanced AI tools. He implies that those with access to premium models will outpace those without. He frames paid AI subscriptions as a form of insurance against obsolescence." Writing in The Guardian, Dan Milmo and Aisha Down mentioned Shumer as having a history of AI hype and stated, "He previously excited the internet by announcing the release of the world's "top open-source model", which it was not". Many workers in the technology sector criticized the article in blog posts shared on Hacker News; Edward Zitron commented that "while coding LLMs can test products, or scan/fix some bugs, this suggests they A) do this autonomously without human input, B) they do this correctly every time (or ever!)." In an article alluding to Shumer's original post, Ari Colaprete wrote "the LLM is fundamentally a writing machine, it does everything via text, and if you make it produce writing that exists purely to serve some sort of mechanical function, and you train it to succeed in that task, then it will tend to do so, even with vast intricacy."

  Read more →
• 

  TRAME

  TRAME (TRAnsmission of MEssages) was the name of the second computer network in the world similar to the internet to be used in an electric utility. Like the internet, the base technology was packet switching; it was developed by the electric utility ENHER in Barcelona. It was deployed by the same utility, first in Catalonia and Aragón, Spain, and later in other places. Its development started in 1974 and the first routers, called nodes at that time, were deployed by 1978. The network was in operation until 2016 (38 years) with successive technological software and hardware updates. == Beginnings == In 1974, packet switching was a technology known only in research circles. The concept began in 1968 in association with the United States' Advanced Research Projects Agency (ARPA) research project ARPANET. The idea of applying the packet switching concept to electric utilities control communication networks first appeared in 1974 when the Swedish power utility Vattenfall started to create its TIDAS packet-switching network and was followed by the Spanish electric utility ENHER, which aimed to telecontrol and automate its high-voltage power grid. For this purpose, ENHER created a specific team of people to develop both the packet-switching network and the supervisory control and data acquisition (SCADA) system, also called the telecontrol system. By 1978 the first four TRAME routers were available and by 1980, eight of them were deployed and operating. The printed circuit boards (PCBs) controlling the communication lines were connected to a shared memory PCB allowing them to exchange data and messages. The project was developed together with its main initial application, the Telecontrol or SCADA system SICL (Sistema Integral de Control Local) with which initially they shared a very similar hardware. The maximum link capacity was 9600 bit/s, which in 1980 was the maximum possible on a 4 kHz wide voice channel at the time. These channels were the basic unit of the then-analog communication systems in use. By that time power utilities used either telephone calls or low speed (below 1200bit/s) dedicated links for telecontrol, typically shared among ten high-voltage electrical substations. == Services == The basic service provided by the TRAME network was SCADA or Telecontrol to automate the high-voltage power grid, thus improving operational efficiency, which was until then operated manually with telephone communication between human operators. Each TRAME router was associated with one or more remote terminal units (RTUs) of the SICL telecontrol system. It also had connected screens, and later PCs, located in electrical substations to interchange messages between them and with the Control Center located in the well-known Casa Fuster in Barcelona. It was a kind of predecessor to today's e-mail. Later, in the 1990s, other protocols (X.25, IP) were developed to include corporate information technology (IT) terminals, company physical surveillance systems and other services. Additionally, applications and terminals were developed for the transmission of voice and video over the TRAME network. == Protocols == The TRAME routing system, like that of the original ARPANET, was based on the Bellman-Ford algorithm but with "split-horizon" as in the Swedish TIDAS network, but with an original improvement. This protocol allows optimal paths to be found in meshed networks for each packet to be transmitted, allowing the shared use of the same network by multiple services. In contrast, traditional circuit-switched technology used to establish dedicated circuits for each service or communication. The addressing of routers and terminals used a proprietary system with a 16-bit address; it would be the equivalent of the well-known IP (Internet Protocol) version 4 (IPv4), still in use on the internet today, which uses 32-bit addresses. It is necessary to take into account that in 1978, the IPv4 protocol did not yet exist since the IPv4 version used on the internet did not appear until 1981, and in fact, did not reach the general public until much later. The line protocols were also proprietary and were called UCL (Unidad de Control de Línea, 'line control unit'), which linked the routers together, and UTR (Unión TRAME-Remotas), the access protocol. They were designed to offer the highest quality of service required by the telecontrol/SCADA function in terms of data integrity and availability set by the International Electrotechnical Commission (IEC) IEC-870-5-1 and ANSI C37.1. standards, and because the protocol used at the time in corporate computer networks, HDLC (high-level data link control), did not offer enough quality for critical industrial applications. Later on, other protocols like X.25 and IP were also made compatible with the aforementioned TRAME protocols. In 2000, the UTR protocol was replaced by the international standard IEC 60870- 5-101/104. Initially network flow control was based on the management of eight data priorities in head-of-the-line (HOL) waiting queues. Later and after some experimentation, a flow control method based on a bit indicating route congestion and management of the gap between packets when accessing the network was adopted. This required measuring the capacity of the route bottleneck. An end-to-end protocol was also added for some flows requiring order preservation like X.25. == Evolution == To last for 38 years, the technology had to endure intense evolution. There were essentially four TRAME generations which are summarized in the table. A description of the four generations of TRAME is provided below. === TRAME 1 === The project began in 1974 and in 1978 a first network with four routers was already installed and in operation at the electric utility ENHER. In 1980, the network had eight nodes in operation (see Figure I). The hardware was based on the Zilog Z80 processor and had a multiprocessor structure with 16 processors sharing a common memory. The software was developed at ENHER's headquarters located in the well-known Casa Fuster, Passeig de Gràcia, 132, Barcelona, using the Z80 assembly language. Beyond 1980 the software began to be written in C programming language and an HP64000 Logic Development System emulator was used for the purpose. The hardware was produced by ISEL, an INI (Instituto Nacional de Indústria) company. The routing system was a variant of Bellman-Ford with split-horizon. It was an improvement of the original ARPA network routing system consisting of an original update procedure which allowed for a faster reaction to changes. The distance function was the number of packets in the output waiting queues plus one. The line protocols (UCL for internal lines linking routers and UTR for accessing the network) were designed to meet the stringent requirements set for telecontrol (SCADA) of high-voltage power networks (IEC-870-5-1 and ANSI C37.1 standards). At the OSI transport layer, windows with a width of 1 to 8, depending on the required service, residing in the terminals were used. Initially, addresses were only 14 bits long to address both the routers (called nodes by then) and the devices connected to them. They were made up of two fields, an 8-bit field to address the router and a 6-bit sub-address to address the terminals connected to it. The node address was assigned to the nodes and not to the ends of the links as in the internet. The basic advantages of TRAME over other technologies used in electric utilities at the time were in part due to the packet technology itself: ability to manage any network topology, automatic adaptability to topological and traffic changes, integration of different link technologies (digital or analog) and capacities in a single network, open and decentralized intercommunicability between users and devices, simultaneous communication with several users and locations from a single physical connection, and integrated network supervision. In fact, the network was provided from its inception with a supervision center consisting of a computer and a synoptic board located at the company's headquarters (see Figure II). But other advantages were due to the specific design of TRAME: high data integrity, priority support for packets, and ease of including special protocols such as the many SCADA protocols in use at that time. All of the above resulted in improved quality of service, especially with respect to data availability and data integrity, and in the integration of services in a single network. Part of the evolution of its deployment can be seen in Figures II to IV. === TRAME 2 === In 1990, TRAME 2 was fully deployed and TRAME 1 was replaced. The processor of the new hardware was Intel 80286 and the hardware structure and external appearance of the routers was very similar to that of TRAME 1. The software was written in C and the above-mentioned emulator continued to be used. Improvements over TRAME 1 were the introduction of the standardized X.25 access protocol

  Read more →
• 

  Voice inversion

  Voice inversion scrambling is an analog method of obscuring the content of a transmission. It is sometimes used in public service radio, automobile racing, cordless telephones and the Family Radio Service. Without a descrambler, the transmission makes the speaker "sound like Donald Duck". Despite the term, the technique operates on the passband of the information and so can be applied to any information being transmitted. == Forms and details == There are various forms of voice inversion which offer differing levels of security. Overall, voice inversion scrambling offers little true security as software and even hobbyist kits are available from kit makers for scrambling and descrambling. The cadence of the speech is not changed. It is often easy to guess what is happening in the conversation by listening for other audio cues like questions, short responses and other language cadences. In the simplest form of voice inversion, the frequency p {\displaystyle p} of each component is replaced with s − p {\displaystyle s-p} , where s {\displaystyle s} is the frequency of a carrier wave. This can be done by amplitude modulating the speech signal with the carrier, then applying a low-pass filter to select the lower sideband. This will make the low tones of the voice sound like high ones and vice versa. This process also occurs naturally if a radio receiver is tuned to a single sideband transmission but set to decode the wrong sideband. There are more advanced forms of voice inversion which are more complex and require more effort to descramble. One method is to use a random code to choose the carrier frequency and then change this code in real time. This is called Rolling Code voice inversion and one can often hear the "ticks" in the transmission which signal the changing of the inversion point. Another method is split band voice inversion. This is where the band is split and then each band is inverted separately. A rolling code can also be added to this method for variable split band inversion (VSB). Common carrier frequencies are: 2.632 kHz, 2.718 kHz, 2.868 kHz, 3.023 kHz, 3.107 kHz, 3.196 kHz, 3.333 kHz, 3.339 kHz, 3.496 kHz, 3.729 kHz and 4.096 kHz. Voice inversion offers no security at all and software is available to restore the original voice, which is why it is no longer used to protect conversations today. However, voice inversion is still found in low-end Chinese walkie talkies.

  Read more →